diff options
Diffstat (limited to 'sound/soc/codecs/ssm3515.c')
| -rw-r--r-- | sound/soc/codecs/ssm3515.c | 448 |
1 files changed, 448 insertions, 0 deletions
diff --git a/sound/soc/codecs/ssm3515.c b/sound/soc/codecs/ssm3515.c new file mode 100644 index 0000000000..8c6665677a --- /dev/null +++ b/sound/soc/codecs/ssm3515.c @@ -0,0 +1,448 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +// +// Analog Devices' SSM3515 audio amp driver +// +// Copyright (C) The Asahi Linux Contributors + +#include <linux/bits.h> +#include <linux/bitfield.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> + +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> + + +#define SSM3515_PWR 0x00 +#define SSM3515_PWR_APWDN_EN BIT(7) +#define SSM3515_PWR_BSNS_PWDN BIT(6) +#define SSM3515_PWR_S_RST BIT(1) +#define SSM3515_PWR_SPWDN BIT(0) + +#define SSM3515_GEC 0x01 +#define SSM3515_GEC_EDGE BIT(4) +#define SSM3515_GEC_EDGE_SHIFT 4 +#define SSM3515_GEC_ANA_GAIN GENMASK(1, 0) + +#define SSM3515_DAC 0x02 +#define SSM3515_DAC_HV BIT(7) +#define SSM3515_DAC_MUTE BIT(6) +#define SSM3515_DAC_HPF BIT(5) +#define SSM3515_DAC_LPM BIT(4) +#define SSM3515_DAC_FS GENMASK(2, 0) + +#define SSM3515_DAC_VOL 0x03 + +#define SSM3515_SAI1 0x04 +#define SSM3515_SAI1_DAC_POL BIT(7) +#define SSM3515_SAI1_BCLK_POL BIT(6) +#define SSM3515_SAI1_TDM_BCLKS GENMASK(5, 3) +#define SSM3515_SAI1_FSYNC_MODE BIT(2) +#define SSM3515_SAI1_SDATA_FMT BIT(1) +#define SSM3515_SAI1_SAI_MODE BIT(0) + +#define SSM3515_SAI2 0x05 +#define SSM3515_SAI2_DATA_WIDTH BIT(7) +#define SSM3515_SAI2_AUTO_SLOT BIT(4) +#define SSM3515_SAI2_TDM_SLOT GENMASK(3, 0) + +#define SSM3515_VBAT_OUT 0x06 + +#define SSM3515_STATUS 0x0a +#define SSM3515_STATUS_UVLO_REG BIT(6) +#define SSM3515_STATUS_LIM_EG BIT(5) +#define SSM3515_STATUS_CLIP BIT(4) +#define SSM3515_STATUS_AMP_OC BIT(3) +#define SSM3515_STATUS_OTF BIT(2) +#define SSM3515_STATUS_OTW BIT(1) +#define SSM3515_STATUS_BAT_WARN BIT(0) + +static bool ssm3515_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case SSM3515_STATUS: + case SSM3515_VBAT_OUT: + return true; + + default: + return false; + } +} + +static const struct reg_default ssm3515_reg_defaults[] = { + { SSM3515_PWR, 0x81 }, + { SSM3515_GEC, 0x01 }, + { SSM3515_DAC, 0x32 }, + { SSM3515_DAC_VOL, 0x40 }, + { SSM3515_SAI1, 0x11 }, + { SSM3515_SAI2, 0x00 }, +}; + +static const struct regmap_config ssm3515_i2c_regmap = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = ssm3515_volatile_reg, + .max_register = 0xb, + .reg_defaults = ssm3515_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(ssm3515_reg_defaults), + .cache_type = REGCACHE_FLAT, +}; + +struct ssm3515_data { + struct device *dev; + struct regmap *regmap; +}; + +// The specced range is -71.25...24.00 dB with step size of 0.375 dB, +// and a mute item below that. This is represented by -71.62...24.00 dB +// with the mute item mapped onto the low end. +static DECLARE_TLV_DB_MINMAX_MUTE(ssm3515_dac_volume, -7162, 2400); + +static const char * const ssm3515_ana_gain_text[] = { + "8.4 V Span", "12.6 V Span", "14 V Span", "15 V Span", +}; + +static SOC_ENUM_SINGLE_DECL(ssm3515_ana_gain_enum, SSM3515_GEC, + __bf_shf(SSM3515_GEC_ANA_GAIN), + ssm3515_ana_gain_text); + +static const struct snd_kcontrol_new ssm3515_snd_controls[] = { + SOC_SINGLE_TLV("DAC Playback Volume", SSM3515_DAC_VOL, + 0, 255, 1, ssm3515_dac_volume), + SOC_SINGLE("Low EMI Mode Switch", SSM3515_GEC, + __bf_shf(SSM3515_GEC_EDGE), 1, 0), + SOC_SINGLE("Soft Volume Ramping Switch", SSM3515_DAC, + __bf_shf(SSM3515_DAC_HV), 1, 1), + SOC_SINGLE("HPF Switch", SSM3515_DAC, + __bf_shf(SSM3515_DAC_HPF), 1, 0), + SOC_SINGLE("DAC Invert Switch", SSM3515_SAI1, + __bf_shf(SSM3515_SAI1_DAC_POL), 1, 0), + SOC_ENUM("DAC Analog Gain Select", ssm3515_ana_gain_enum), +}; + +static void ssm3515_read_faults(struct snd_soc_component *component) +{ + int ret; + + ret = snd_soc_component_read(component, SSM3515_STATUS); + if (ret <= 0) { + /* + * If the read was erroneous, ASoC core has printed a message, + * and that's all that's appropriate in handling the error here. + */ + return; + } + + dev_err(component->dev, "device reports:%s%s%s%s%s%s%s\n", + FIELD_GET(SSM3515_STATUS_UVLO_REG, ret) ? " voltage regulator fault" : "", + FIELD_GET(SSM3515_STATUS_LIM_EG, ret) ? " limiter engaged" : "", + FIELD_GET(SSM3515_STATUS_CLIP, ret) ? " clipping detected" : "", + FIELD_GET(SSM3515_STATUS_AMP_OC, ret) ? " amp over-current fault" : "", + FIELD_GET(SSM3515_STATUS_OTF, ret) ? " overtemperature fault" : "", + FIELD_GET(SSM3515_STATUS_OTW, ret) ? " overtemperature warning" : "", + FIELD_GET(SSM3515_STATUS_BAT_WARN, ret) ? " bat voltage low warning" : ""); +} + +static int ssm3515_probe(struct snd_soc_component *component) +{ + int ret; + + /* Start out muted */ + ret = snd_soc_component_update_bits(component, SSM3515_DAC, + SSM3515_DAC_MUTE, SSM3515_DAC_MUTE); + if (ret < 0) + return ret; + + /* Disable the 'master power-down' */ + ret = snd_soc_component_update_bits(component, SSM3515_PWR, + SSM3515_PWR_SPWDN, 0); + if (ret < 0) + return ret; + + return 0; +} + +static int ssm3515_mute(struct snd_soc_dai *dai, int mute, int direction) +{ + int ret; + + ret = snd_soc_component_update_bits(dai->component, + SSM3515_DAC, + SSM3515_DAC_MUTE, + FIELD_PREP(SSM3515_DAC_MUTE, mute)); + if (ret < 0) + return ret; + return 0; +} + +static int ssm3515_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + int ret, rateval; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16: + case SNDRV_PCM_FORMAT_S24: + ret = snd_soc_component_update_bits(component, + SSM3515_SAI2, SSM3515_SAI2_DATA_WIDTH, + FIELD_PREP(SSM3515_SAI2_DATA_WIDTH, + params_width(params) == 16)); + if (ret < 0) + return ret; + break; + + default: + return -EINVAL; + } + + switch (params_rate(params)) { + case 8000 ... 12000: + rateval = 0; + break; + case 16000 ... 24000: + rateval = 1; + break; + case 32000 ... 48000: + rateval = 2; + break; + case 64000 ... 96000: + rateval = 3; + break; + case 128000 ... 192000: + rateval = 4; + break; + case 48001 ... 63999: /* this is ...72000 but overlaps */ + rateval = 5; + break; + default: + return -EINVAL; + } + + ret = snd_soc_component_update_bits(component, + SSM3515_DAC, SSM3515_DAC_FS, + FIELD_PREP(SSM3515_DAC_FS, rateval)); + if (ret < 0) + return ret; + + return 0; +} + +static int ssm3515_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + bool fpol_inv = false; /* non-inverted: frame starts with low-to-high FSYNC */ + int ret; + u8 sai1 = 0; + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_IB_NF: + case SND_SOC_DAIFMT_IB_IF: + sai1 |= SSM3515_SAI1_BCLK_POL; + break; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + fpol_inv = 1; + sai1 &= ~SSM3515_SAI1_SDATA_FMT; /* 1 bit start delay */ + break; + case SND_SOC_DAIFMT_LEFT_J: + fpol_inv = 0; + sai1 |= SSM3515_SAI1_SDATA_FMT; /* no start delay */ + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_IF: + case SND_SOC_DAIFMT_IB_IF: + fpol_inv ^= 1; + break; + } + + /* Set the serial input to 'TDM mode' */ + sai1 |= SSM3515_SAI1_SAI_MODE; + + if (fpol_inv) { + /* + * We configure the codec in a 'TDM mode', in which the + * FSYNC_MODE bit of SAI1 is supposed to select between + * what the datasheet calls 'Pulsed FSYNC mode' and '50% + * FSYNC mode'. + * + * Experiments suggest that this bit in fact simply selects + * the FSYNC polarity, so go with that. + */ + sai1 |= SSM3515_SAI1_FSYNC_MODE; + } + + ret = snd_soc_component_update_bits(component, SSM3515_SAI1, + SSM3515_SAI1_BCLK_POL | SSM3515_SAI1_SDATA_FMT | + SSM3515_SAI1_SAI_MODE | SSM3515_SAI1_FSYNC_MODE, sai1); + + if (ret < 0) + return ret; + return 0; +} + +static int ssm3515_set_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, + unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + int slot, tdm_bclks_val, ret; + + if (tx_mask == 0 || rx_mask != 0) + return -EINVAL; + + slot = __ffs(tx_mask); + + if (tx_mask & ~BIT(slot)) + return -EINVAL; + + switch (slot_width) { + case 16: + tdm_bclks_val = 0; + break; + case 24: + tdm_bclks_val = 1; + break; + case 32: + tdm_bclks_val = 2; + break; + case 48: + tdm_bclks_val = 3; + break; + case 64: + tdm_bclks_val = 4; + break; + default: + return -EINVAL; + } + + ret = snd_soc_component_update_bits(component, SSM3515_SAI1, + SSM3515_SAI1_TDM_BCLKS, + FIELD_PREP(SSM3515_SAI1_TDM_BCLKS, tdm_bclks_val)); + if (ret < 0) + return ret; + + ret = snd_soc_component_update_bits(component, SSM3515_SAI2, + SSM3515_SAI2_TDM_SLOT, + FIELD_PREP(SSM3515_SAI2_TDM_SLOT, slot)); + if (ret < 0) + return ret; + + return 0; +} + +static int ssm3515_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + /* + * We don't get live notification of faults, so at least at + * this time, when playback is over, check if we have tripped + * over anything and if so, log it. + */ + ssm3515_read_faults(dai->component); + return 0; +} + +static const struct snd_soc_dai_ops ssm3515_dai_ops = { + .mute_stream = ssm3515_mute, + .hw_params = ssm3515_hw_params, + .set_fmt = ssm3515_set_fmt, + .set_tdm_slot = ssm3515_set_tdm_slot, + .hw_free = ssm3515_hw_free, +}; + +static struct snd_soc_dai_driver ssm3515_dai_driver = { + .name = "SSM3515 SAI", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 1, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE, + }, + .ops = &ssm3515_dai_ops, +}; + +static const struct snd_soc_dapm_widget ssm3515_dapm_widgets[] = { + SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_OUTPUT("OUT"), +}; + +static const struct snd_soc_dapm_route ssm3515_dapm_routes[] = { + {"OUT", NULL, "DAC"}, + {"DAC", NULL, "Playback"}, +}; + +static const struct snd_soc_component_driver ssm3515_asoc_component = { + .probe = ssm3515_probe, + .controls = ssm3515_snd_controls, + .num_controls = ARRAY_SIZE(ssm3515_snd_controls), + .dapm_widgets = ssm3515_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(ssm3515_dapm_widgets), + .dapm_routes = ssm3515_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(ssm3515_dapm_routes), + .endianness = 1, +}; + +static int ssm3515_i2c_probe(struct i2c_client *client) +{ + struct ssm3515_data *data; + int ret; + + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->dev = &client->dev; + i2c_set_clientdata(client, data); + + data->regmap = devm_regmap_init_i2c(client, &ssm3515_i2c_regmap); + if (IS_ERR(data->regmap)) + return dev_err_probe(data->dev, PTR_ERR(data->regmap), + "initializing register map\n"); + + /* Perform a reset */ + ret = regmap_update_bits(data->regmap, SSM3515_PWR, + SSM3515_PWR_S_RST, SSM3515_PWR_S_RST); + if (ret < 0) + return dev_err_probe(data->dev, ret, + "performing software reset\n"); + regmap_reinit_cache(data->regmap, &ssm3515_i2c_regmap); + + return devm_snd_soc_register_component(data->dev, + &ssm3515_asoc_component, + &ssm3515_dai_driver, 1); +} + +static const struct of_device_id ssm3515_of_match[] = { + { .compatible = "adi,ssm3515" }, + {} +}; +MODULE_DEVICE_TABLE(of, ssm3515_of_match); + +static struct i2c_driver ssm3515_i2c_driver = { + .driver = { + .name = "ssm3515", + .of_match_table = ssm3515_of_match, + }, + .probe = ssm3515_i2c_probe, +}; +module_i2c_driver(ssm3515_i2c_driver); + +MODULE_AUTHOR("Martin PoviĊĦer <povik+lin@cutebit.org>"); +MODULE_DESCRIPTION("ASoC SSM3515 audio amp driver"); +MODULE_LICENSE("Dual MIT/GPL"); |