diff options
Diffstat (limited to '')
-rw-r--r-- | sound/soc/codecs/tas5720.c | 831 |
1 files changed, 831 insertions, 0 deletions
diff --git a/sound/soc/codecs/tas5720.c b/sound/soc/codecs/tas5720.c new file mode 100644 index 0000000000..6dd6c0896e --- /dev/null +++ b/sound/soc/codecs/tas5720.c @@ -0,0 +1,831 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * tas5720.c - ALSA SoC Texas Instruments TAS5720 Mono Audio Amplifier + * + * Copyright (C)2015-2016 Texas Instruments Incorporated - https://www.ti.com + * + * Author: Andreas Dannenberg <dannenberg@ti.com> + */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/regulator/consumer.h> +#include <linux/delay.h> + +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/tlv.h> + +#include "tas5720.h" + +/* Define how often to check (and clear) the fault status register (in ms) */ +#define TAS5720_FAULT_CHECK_INTERVAL 200 + +enum tas572x_type { + TAS5720, + TAS5720A_Q1, + TAS5722, +}; + +static const char * const tas5720_supply_names[] = { + "dvdd", /* Digital power supply. Connect to 3.3-V supply. */ + "pvdd", /* Class-D amp and analog power supply (connected). */ +}; + +#define TAS5720_NUM_SUPPLIES ARRAY_SIZE(tas5720_supply_names) + +struct tas5720_data { + struct snd_soc_component *component; + struct regmap *regmap; + struct i2c_client *tas5720_client; + enum tas572x_type devtype; + struct regulator_bulk_data supplies[TAS5720_NUM_SUPPLIES]; + struct delayed_work fault_check_work; + unsigned int last_fault; +}; + +static int tas5720_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + unsigned int rate = params_rate(params); + bool ssz_ds; + int ret; + + switch (rate) { + case 44100: + case 48000: + ssz_ds = false; + break; + case 88200: + case 96000: + ssz_ds = true; + break; + default: + dev_err(component->dev, "unsupported sample rate: %u\n", rate); + return -EINVAL; + } + + ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL1_REG, + TAS5720_SSZ_DS, ssz_ds); + if (ret < 0) { + dev_err(component->dev, "error setting sample rate: %d\n", ret); + return ret; + } + + return 0; +} + +static int tas5720_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + u8 serial_format; + int ret; + + if ((fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) != SND_SOC_DAIFMT_CBC_CFC) { + dev_vdbg(component->dev, "DAI clocking invalid\n"); + return -EINVAL; + } + + switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK | + SND_SOC_DAIFMT_INV_MASK)) { + case (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF): + /* 1st data bit occur one BCLK cycle after the frame sync */ + serial_format = TAS5720_SAIF_I2S; + break; + case (SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF): + /* + * Note that although the TAS5720 does not have a dedicated DSP + * mode it doesn't care about the LRCLK duty cycle during TDM + * operation. Therefore we can use the device's I2S mode with + * its delaying of the 1st data bit to receive DSP_A formatted + * data. See device datasheet for additional details. + */ + serial_format = TAS5720_SAIF_I2S; + break; + case (SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_NB_NF): + /* + * Similar to DSP_A, we can use the fact that the TAS5720 does + * not care about the LRCLK duty cycle during TDM to receive + * DSP_B formatted data in LEFTJ mode (no delaying of the 1st + * data bit). + */ + serial_format = TAS5720_SAIF_LEFTJ; + break; + case (SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF): + /* No delay after the frame sync */ + serial_format = TAS5720_SAIF_LEFTJ; + break; + default: + dev_vdbg(component->dev, "DAI Format is not found\n"); + return -EINVAL; + } + + ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL1_REG, + TAS5720_SAIF_FORMAT_MASK, + serial_format); + if (ret < 0) { + dev_err(component->dev, "error setting SAIF format: %d\n", ret); + return ret; + } + + return 0; +} + +static int tas5720_set_dai_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component); + unsigned int first_slot; + int ret; + + if (!tx_mask) { + dev_err(component->dev, "tx masks must not be 0\n"); + return -EINVAL; + } + + /* + * Determine the first slot that is being requested. We will only + * use the first slot that is found since the TAS5720 is a mono + * amplifier. + */ + first_slot = __ffs(tx_mask); + + if (first_slot > 7) { + dev_err(component->dev, "slot selection out of bounds (%u)\n", + first_slot); + return -EINVAL; + } + + /* + * Enable manual TDM slot selection (instead of I2C ID based). + * This is not applicable to TAS5720A-Q1. + */ + switch (tas5720->devtype) { + case TAS5720A_Q1: + break; + default: + ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL1_REG, + TAS5720_TDM_CFG_SRC, TAS5720_TDM_CFG_SRC); + if (ret < 0) + goto error_snd_soc_component_update_bits; + + /* Configure the TDM slot to process audio from */ + ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL2_REG, + TAS5720_TDM_SLOT_SEL_MASK, first_slot); + if (ret < 0) + goto error_snd_soc_component_update_bits; + break; + } + + /* Configure TDM slot width. This is only applicable to TAS5722. */ + switch (tas5720->devtype) { + case TAS5722: + ret = snd_soc_component_update_bits(component, TAS5722_DIGITAL_CTRL2_REG, + TAS5722_TDM_SLOT_16B, + slot_width == 16 ? + TAS5722_TDM_SLOT_16B : 0); + if (ret < 0) + goto error_snd_soc_component_update_bits; + break; + default: + break; + } + + return 0; + +error_snd_soc_component_update_bits: + dev_err(component->dev, "error configuring TDM mode: %d\n", ret); + return ret; +} + +static int tas5720_mute_soc_component(struct snd_soc_component *component, int mute) +{ + struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component); + unsigned int reg, mask; + int ret; + + switch (tas5720->devtype) { + case TAS5720A_Q1: + reg = TAS5720_Q1_VOLUME_CTRL_CFG_REG; + mask = TAS5720_Q1_MUTE; + break; + default: + reg = TAS5720_DIGITAL_CTRL2_REG; + mask = TAS5720_MUTE; + break; + } + + ret = snd_soc_component_update_bits(component, reg, mask, mute ? mask : 0); + if (ret < 0) { + dev_err(component->dev, "error (un-)muting device: %d\n", ret); + return ret; + } + + return 0; +} + +static int tas5720_mute(struct snd_soc_dai *dai, int mute, int direction) +{ + return tas5720_mute_soc_component(dai->component, mute); +} + +static void tas5720_fault_check_work(struct work_struct *work) +{ + struct tas5720_data *tas5720 = container_of(work, struct tas5720_data, + fault_check_work.work); + struct device *dev = tas5720->component->dev; + unsigned int curr_fault; + int ret; + + ret = regmap_read(tas5720->regmap, TAS5720_FAULT_REG, &curr_fault); + if (ret < 0) { + dev_err(dev, "failed to read FAULT register: %d\n", ret); + goto out; + } + + /* Check/handle all errors except SAIF clock errors */ + curr_fault &= TAS5720_OCE | TAS5720_DCE | TAS5720_OTE; + + /* + * Only flag errors once for a given occurrence. This is needed as + * the TAS5720 will take time clearing the fault condition internally + * during which we don't want to bombard the system with the same + * error message over and over. + */ + if ((curr_fault & TAS5720_OCE) && !(tas5720->last_fault & TAS5720_OCE)) + dev_crit(dev, "experienced an over current hardware fault\n"); + + if ((curr_fault & TAS5720_DCE) && !(tas5720->last_fault & TAS5720_DCE)) + dev_crit(dev, "experienced a DC detection fault\n"); + + if ((curr_fault & TAS5720_OTE) && !(tas5720->last_fault & TAS5720_OTE)) + dev_crit(dev, "experienced an over temperature fault\n"); + + /* Store current fault value so we can detect any changes next time */ + tas5720->last_fault = curr_fault; + + if (!curr_fault) + goto out; + + /* + * Periodically toggle SDZ (shutdown bit) H->L->H to clear any latching + * faults as long as a fault condition persists. Always going through + * the full sequence no matter the first return value to minimizes + * chances for the device to end up in shutdown mode. + */ + ret = regmap_write_bits(tas5720->regmap, TAS5720_POWER_CTRL_REG, + TAS5720_SDZ, 0); + if (ret < 0) + dev_err(dev, "failed to write POWER_CTRL register: %d\n", ret); + + ret = regmap_write_bits(tas5720->regmap, TAS5720_POWER_CTRL_REG, + TAS5720_SDZ, TAS5720_SDZ); + if (ret < 0) + dev_err(dev, "failed to write POWER_CTRL register: %d\n", ret); + +out: + /* Schedule the next fault check at the specified interval */ + schedule_delayed_work(&tas5720->fault_check_work, + msecs_to_jiffies(TAS5720_FAULT_CHECK_INTERVAL)); +} + +static int tas5720_codec_probe(struct snd_soc_component *component) +{ + struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component); + unsigned int device_id, expected_device_id; + int ret; + + tas5720->component = component; + + ret = regulator_bulk_enable(ARRAY_SIZE(tas5720->supplies), + tas5720->supplies); + if (ret != 0) { + dev_err(component->dev, "failed to enable supplies: %d\n", ret); + return ret; + } + + /* + * Take a liberal approach to checking the device ID to allow the + * driver to be used even if the device ID does not match, however + * issue a warning if there is a mismatch. + */ + ret = regmap_read(tas5720->regmap, TAS5720_DEVICE_ID_REG, &device_id); + if (ret < 0) { + dev_err(component->dev, "failed to read device ID register: %d\n", + ret); + goto probe_fail; + } + + switch (tas5720->devtype) { + case TAS5720: + expected_device_id = TAS5720_DEVICE_ID; + break; + case TAS5720A_Q1: + expected_device_id = TAS5720A_Q1_DEVICE_ID; + break; + case TAS5722: + expected_device_id = TAS5722_DEVICE_ID; + break; + default: + dev_err(component->dev, "unexpected private driver data\n"); + ret = -EINVAL; + goto probe_fail; + } + + if (device_id != expected_device_id) + dev_warn(component->dev, "wrong device ID. expected: %u read: %u\n", + expected_device_id, device_id); + + /* Set device to mute */ + ret = tas5720_mute_soc_component(component, 1); + if (ret < 0) + goto error_snd_soc_component_update_bits; + + /* Set Bit 7 in TAS5720_ANALOG_CTRL_REG to 1 for TAS5720A_Q1 */ + switch (tas5720->devtype) { + case TAS5720A_Q1: + ret = snd_soc_component_update_bits(component, TAS5720_ANALOG_CTRL_REG, + TAS5720_Q1_RESERVED7_BIT, + TAS5720_Q1_RESERVED7_BIT); + break; + default: + break; + } + if (ret < 0) + goto error_snd_soc_component_update_bits; + + /* + * Enter shutdown mode - our default when not playing audio - to + * minimize current consumption. On the TAS5720 there is no real down + * side doing so as all device registers are preserved and the wakeup + * of the codec is rather quick which we do using a dapm widget. + */ + ret = snd_soc_component_update_bits(component, TAS5720_POWER_CTRL_REG, + TAS5720_SDZ, 0); + if (ret < 0) + goto error_snd_soc_component_update_bits; + + INIT_DELAYED_WORK(&tas5720->fault_check_work, tas5720_fault_check_work); + + return 0; + +error_snd_soc_component_update_bits: + dev_err(component->dev, "error configuring device registers: %d\n", ret); + +probe_fail: + regulator_bulk_disable(ARRAY_SIZE(tas5720->supplies), + tas5720->supplies); + return ret; +} + +static void tas5720_codec_remove(struct snd_soc_component *component) +{ + struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component); + int ret; + + cancel_delayed_work_sync(&tas5720->fault_check_work); + + ret = regulator_bulk_disable(ARRAY_SIZE(tas5720->supplies), + tas5720->supplies); + if (ret < 0) + dev_err(component->dev, "failed to disable supplies: %d\n", ret); +}; + +static int tas5720_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component); + int ret; + + if (event & SND_SOC_DAPM_POST_PMU) { + /* Take TAS5720 out of shutdown mode */ + ret = snd_soc_component_update_bits(component, TAS5720_POWER_CTRL_REG, + TAS5720_SDZ, TAS5720_SDZ); + if (ret < 0) { + dev_err(component->dev, "error waking component: %d\n", ret); + return ret; + } + + /* + * Observe codec shutdown-to-active time. The datasheet only + * lists a nominal value however just use-it as-is without + * additional padding to minimize the delay introduced in + * starting to play audio (actually there is other setup done + * by the ASoC framework that will provide additional delays, + * so we should always be safe). + */ + msleep(25); + + /* Turn on TAS5720 periodic fault checking/handling */ + tas5720->last_fault = 0; + schedule_delayed_work(&tas5720->fault_check_work, + msecs_to_jiffies(TAS5720_FAULT_CHECK_INTERVAL)); + } else if (event & SND_SOC_DAPM_PRE_PMD) { + /* Disable TAS5720 periodic fault checking/handling */ + cancel_delayed_work_sync(&tas5720->fault_check_work); + + /* Place TAS5720 in shutdown mode to minimize current draw */ + ret = snd_soc_component_update_bits(component, TAS5720_POWER_CTRL_REG, + TAS5720_SDZ, 0); + if (ret < 0) { + dev_err(component->dev, "error shutting down component: %d\n", + ret); + return ret; + } + } + + return 0; +} + +#ifdef CONFIG_PM +static int tas5720_suspend(struct snd_soc_component *component) +{ + struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component); + int ret; + + regcache_cache_only(tas5720->regmap, true); + regcache_mark_dirty(tas5720->regmap); + + ret = regulator_bulk_disable(ARRAY_SIZE(tas5720->supplies), + tas5720->supplies); + if (ret < 0) + dev_err(component->dev, "failed to disable supplies: %d\n", ret); + + return ret; +} + +static int tas5720_resume(struct snd_soc_component *component) +{ + struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component); + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(tas5720->supplies), + tas5720->supplies); + if (ret < 0) { + dev_err(component->dev, "failed to enable supplies: %d\n", ret); + return ret; + } + + regcache_cache_only(tas5720->regmap, false); + + ret = regcache_sync(tas5720->regmap); + if (ret < 0) { + dev_err(component->dev, "failed to sync regcache: %d\n", ret); + return ret; + } + + return 0; +} +#else +#define tas5720_suspend NULL +#define tas5720_resume NULL +#endif + +static bool tas5720_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TAS5720_DEVICE_ID_REG: + case TAS5720_FAULT_REG: + return true; + default: + return false; + } +} + +static const struct regmap_config tas5720_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = TAS5720_MAX_REG, + .cache_type = REGCACHE_RBTREE, + .volatile_reg = tas5720_is_volatile_reg, +}; + +static const struct regmap_config tas5720a_q1_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = TAS5720_MAX_REG, + .cache_type = REGCACHE_RBTREE, + .volatile_reg = tas5720_is_volatile_reg, +}; + +static const struct regmap_config tas5722_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = TAS5722_MAX_REG, + .cache_type = REGCACHE_RBTREE, + .volatile_reg = tas5720_is_volatile_reg, +}; + +/* + * DAC analog gain. There are four discrete values to select from, ranging + * from 19.2 dB to 26.3dB. + */ +static const DECLARE_TLV_DB_RANGE(dac_analog_tlv, + 0x0, 0x0, TLV_DB_SCALE_ITEM(1920, 0, 0), + 0x1, 0x1, TLV_DB_SCALE_ITEM(2070, 0, 0), + 0x2, 0x2, TLV_DB_SCALE_ITEM(2350, 0, 0), + 0x3, 0x3, TLV_DB_SCALE_ITEM(2630, 0, 0), +); + +/* + * DAC analog gain for TAS5720A-Q1. There are three discrete values to select from, ranging + * from 19.2 dB to 25.0dB. + */ +static const DECLARE_TLV_DB_RANGE(dac_analog_tlv_a_q1, + 0x0, 0x0, TLV_DB_SCALE_ITEM(1920, 0, 0), + 0x1, 0x1, TLV_DB_SCALE_ITEM(2260, 0, 0), + 0x2, 0x2, TLV_DB_SCALE_ITEM(2500, 0, 0), +); + +/* + * DAC digital volumes. From -103.5 to 24 dB in 0.5 dB or 0.25 dB steps + * depending on the device. Note that setting the gain below -100 dB + * (register value <0x7) is effectively a MUTE as per device datasheet. + * + * Note that for the TAS5722 the digital volume controls are actually split + * over two registers, so we need custom getters/setters for access. + */ +static DECLARE_TLV_DB_SCALE(tas5720_dac_tlv, -10350, 50, 0); +static DECLARE_TLV_DB_SCALE(tas5722_dac_tlv, -10350, 25, 0); + +static int tas5722_volume_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + unsigned int val; + + val = snd_soc_component_read(component, TAS5720_VOLUME_CTRL_REG); + ucontrol->value.integer.value[0] = val << 1; + + val = snd_soc_component_read(component, TAS5722_DIGITAL_CTRL2_REG); + ucontrol->value.integer.value[0] |= val & TAS5722_VOL_CONTROL_LSB; + + return 0; +} + +static int tas5722_volume_set(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + unsigned int sel = ucontrol->value.integer.value[0]; + + snd_soc_component_write(component, TAS5720_VOLUME_CTRL_REG, sel >> 1); + snd_soc_component_update_bits(component, TAS5722_DIGITAL_CTRL2_REG, + TAS5722_VOL_CONTROL_LSB, sel); + + return 0; +} + +static const struct snd_kcontrol_new tas5720_snd_controls[] = { + SOC_SINGLE_TLV("Speaker Driver Playback Volume", + TAS5720_VOLUME_CTRL_REG, 0, 0xff, 0, tas5720_dac_tlv), + SOC_SINGLE_TLV("Speaker Driver Analog Gain", TAS5720_ANALOG_CTRL_REG, + TAS5720_ANALOG_GAIN_SHIFT, 3, 0, dac_analog_tlv), +}; + +static const struct snd_kcontrol_new tas5720a_q1_snd_controls[] = { + SOC_DOUBLE_R_TLV("Speaker Driver Playback Volume", + TAS5720_Q1_VOLUME_CTRL_LEFT_REG, + TAS5720_Q1_VOLUME_CTRL_RIGHT_REG, + 0, 0xff, 0, tas5720_dac_tlv), + SOC_SINGLE_TLV("Speaker Driver Analog Gain", TAS5720_ANALOG_CTRL_REG, + TAS5720_ANALOG_GAIN_SHIFT, 3, 0, dac_analog_tlv_a_q1), +}; + +static const struct snd_kcontrol_new tas5722_snd_controls[] = { + SOC_SINGLE_EXT_TLV("Speaker Driver Playback Volume", + 0, 0, 511, 0, + tas5722_volume_get, tas5722_volume_set, + tas5722_dac_tlv), + SOC_SINGLE_TLV("Speaker Driver Analog Gain", TAS5720_ANALOG_CTRL_REG, + TAS5720_ANALOG_GAIN_SHIFT, 3, 0, dac_analog_tlv), +}; + +static const struct snd_soc_dapm_widget tas5720_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("DAC IN", "Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, tas5720_dac_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_OUTPUT("OUT") +}; + +static const struct snd_soc_dapm_route tas5720_audio_map[] = { + { "DAC", NULL, "DAC IN" }, + { "OUT", NULL, "DAC" }, +}; + +static const struct snd_soc_component_driver soc_component_dev_tas5720 = { + .probe = tas5720_codec_probe, + .remove = tas5720_codec_remove, + .suspend = tas5720_suspend, + .resume = tas5720_resume, + .controls = tas5720_snd_controls, + .num_controls = ARRAY_SIZE(tas5720_snd_controls), + .dapm_widgets = tas5720_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tas5720_dapm_widgets), + .dapm_routes = tas5720_audio_map, + .num_dapm_routes = ARRAY_SIZE(tas5720_audio_map), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, +}; + +static const struct snd_soc_component_driver soc_component_dev_tas5720_a_q1 = { + .probe = tas5720_codec_probe, + .remove = tas5720_codec_remove, + .suspend = tas5720_suspend, + .resume = tas5720_resume, + .controls = tas5720a_q1_snd_controls, + .num_controls = ARRAY_SIZE(tas5720a_q1_snd_controls), + .dapm_widgets = tas5720_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tas5720_dapm_widgets), + .dapm_routes = tas5720_audio_map, + .num_dapm_routes = ARRAY_SIZE(tas5720_audio_map), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, +}; + +static const struct snd_soc_component_driver soc_component_dev_tas5722 = { + .probe = tas5720_codec_probe, + .remove = tas5720_codec_remove, + .suspend = tas5720_suspend, + .resume = tas5720_resume, + .controls = tas5722_snd_controls, + .num_controls = ARRAY_SIZE(tas5722_snd_controls), + .dapm_widgets = tas5720_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tas5720_dapm_widgets), + .dapm_routes = tas5720_audio_map, + .num_dapm_routes = ARRAY_SIZE(tas5720_audio_map), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, +}; + +/* PCM rates supported by the TAS5720 driver */ +#define TAS5720_RATES (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\ + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) + +/* Formats supported by TAS5720 driver */ +#define TAS5720_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S18_3LE |\ + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE) + +static const struct snd_soc_dai_ops tas5720_speaker_dai_ops = { + .hw_params = tas5720_hw_params, + .set_fmt = tas5720_set_dai_fmt, + .set_tdm_slot = tas5720_set_dai_tdm_slot, + .mute_stream = tas5720_mute, + .no_capture_mute = 1, +}; + +/* + * TAS5720 DAI structure + * + * Note that were are advertising .playback.channels_max = 2 despite this being + * a mono amplifier. The reason for that is that some serial ports such as TI's + * McASP module have a minimum number of channels (2) that they can output. + * Advertising more channels than we have will allow us to interface with such + * a serial port without really any negative side effects as the TAS5720 will + * simply ignore any extra channel(s) asides from the one channel that is + * configured to be played back. + */ +static struct snd_soc_dai_driver tas5720_dai[] = { + { + .name = "tas5720-amplifier", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = TAS5720_RATES, + .formats = TAS5720_FORMATS, + }, + .ops = &tas5720_speaker_dai_ops, + }, +}; + +static const struct i2c_device_id tas5720_id[] = { + { "tas5720", TAS5720 }, + { "tas5720a-q1", TAS5720A_Q1 }, + { "tas5722", TAS5722 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tas5720_id); + +static int tas5720_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct tas5720_data *data; + const struct regmap_config *regmap_config; + const struct i2c_device_id *id; + int ret; + int i; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + id = i2c_match_id(tas5720_id, client); + data->tas5720_client = client; + data->devtype = id->driver_data; + + switch (id->driver_data) { + case TAS5720: + regmap_config = &tas5720_regmap_config; + break; + case TAS5720A_Q1: + regmap_config = &tas5720a_q1_regmap_config; + break; + case TAS5722: + regmap_config = &tas5722_regmap_config; + break; + default: + dev_err(dev, "unexpected private driver data\n"); + return -EINVAL; + } + data->regmap = devm_regmap_init_i2c(client, regmap_config); + if (IS_ERR(data->regmap)) { + ret = PTR_ERR(data->regmap); + dev_err(dev, "failed to allocate register map: %d\n", ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(data->supplies); i++) + data->supplies[i].supply = tas5720_supply_names[i]; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies), + data->supplies); + if (ret != 0) { + dev_err(dev, "failed to request supplies: %d\n", ret); + return ret; + } + + dev_set_drvdata(dev, data); + + switch (id->driver_data) { + case TAS5720: + ret = devm_snd_soc_register_component(&client->dev, + &soc_component_dev_tas5720, + tas5720_dai, + ARRAY_SIZE(tas5720_dai)); + break; + case TAS5720A_Q1: + ret = devm_snd_soc_register_component(&client->dev, + &soc_component_dev_tas5720_a_q1, + tas5720_dai, + ARRAY_SIZE(tas5720_dai)); + break; + case TAS5722: + ret = devm_snd_soc_register_component(&client->dev, + &soc_component_dev_tas5722, + tas5720_dai, + ARRAY_SIZE(tas5720_dai)); + break; + default: + dev_err(dev, "unexpected private driver data\n"); + return -EINVAL; + } + if (ret < 0) { + dev_err(dev, "failed to register component: %d\n", ret); + return ret; + } + + return 0; +} + +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id tas5720_of_match[] = { + { .compatible = "ti,tas5720", }, + { .compatible = "ti,tas5720a-q1", }, + { .compatible = "ti,tas5722", }, + { }, +}; +MODULE_DEVICE_TABLE(of, tas5720_of_match); +#endif + +static struct i2c_driver tas5720_i2c_driver = { + .driver = { + .name = "tas5720", + .of_match_table = of_match_ptr(tas5720_of_match), + }, + .probe = tas5720_probe, + .id_table = tas5720_id, +}; + +module_i2c_driver(tas5720_i2c_driver); + +MODULE_AUTHOR("Andreas Dannenberg <dannenberg@ti.com>"); +MODULE_DESCRIPTION("TAS5720 Audio amplifier driver"); +MODULE_LICENSE("GPL"); |