diff options
Diffstat (limited to 'sound/soc/fsl/fsl_esai.c')
-rw-r--r-- | sound/soc/fsl/fsl_esai.c | 1214 |
1 files changed, 1214 insertions, 0 deletions
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c new file mode 100644 index 0000000000..d0d8a01da9 --- /dev/null +++ b/sound/soc/fsl/fsl_esai.c @@ -0,0 +1,1214 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Freescale ESAI ALSA SoC Digital Audio Interface (DAI) driver +// +// Copyright (C) 2014 Freescale Semiconductor, Inc. + +#include <linux/clk.h> +#include <linux/dmaengine.h> +#include <linux/module.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/pm_runtime.h> +#include <sound/dmaengine_pcm.h> +#include <sound/pcm_params.h> + +#include "fsl_esai.h" +#include "imx-pcm.h" + +#define FSL_ESAI_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE) + +/** + * struct fsl_esai_soc_data - soc specific data + * @reset_at_xrun: flags for enable reset operaton + */ +struct fsl_esai_soc_data { + bool reset_at_xrun; +}; + +/** + * struct fsl_esai - ESAI private data + * @dma_params_rx: DMA parameters for receive channel + * @dma_params_tx: DMA parameters for transmit channel + * @pdev: platform device pointer + * @regmap: regmap handler + * @coreclk: clock source to access register + * @extalclk: esai clock source to derive HCK, SCK and FS + * @fsysclk: system clock source to derive HCK, SCK and FS + * @spbaclk: SPBA clock (optional, depending on SoC design) + * @work: work to handle the reset operation + * @soc: soc specific data + * @lock: spin lock between hw_reset() and trigger() + * @fifo_depth: depth of tx/rx FIFO + * @slot_width: width of each DAI slot + * @slots: number of slots + * @tx_mask: slot mask for TX + * @rx_mask: slot mask for RX + * @channels: channel num for tx or rx + * @hck_rate: clock rate of desired HCKx clock + * @sck_rate: clock rate of desired SCKx clock + * @hck_dir: the direction of HCKx pads + * @sck_div: if using PSR/PM dividers for SCKx clock + * @consumer_mode: if fully using DAI clock consumer mode + * @synchronous: if using tx/rx synchronous mode + * @name: driver name + */ +struct fsl_esai { + struct snd_dmaengine_dai_dma_data dma_params_rx; + struct snd_dmaengine_dai_dma_data dma_params_tx; + struct platform_device *pdev; + struct regmap *regmap; + struct clk *coreclk; + struct clk *extalclk; + struct clk *fsysclk; + struct clk *spbaclk; + struct work_struct work; + const struct fsl_esai_soc_data *soc; + spinlock_t lock; /* Protect hw_reset and trigger */ + u32 fifo_depth; + u32 slot_width; + u32 slots; + u32 tx_mask; + u32 rx_mask; + u32 channels[2]; + u32 hck_rate[2]; + u32 sck_rate[2]; + bool hck_dir[2]; + bool sck_div[2]; + bool consumer_mode; + bool synchronous; + char name[32]; +}; + +static struct fsl_esai_soc_data fsl_esai_vf610 = { + .reset_at_xrun = true, +}; + +static struct fsl_esai_soc_data fsl_esai_imx35 = { + .reset_at_xrun = true, +}; + +static struct fsl_esai_soc_data fsl_esai_imx6ull = { + .reset_at_xrun = false, +}; + +static irqreturn_t esai_isr(int irq, void *devid) +{ + struct fsl_esai *esai_priv = (struct fsl_esai *)devid; + struct platform_device *pdev = esai_priv->pdev; + u32 esr; + u32 saisr; + + regmap_read(esai_priv->regmap, REG_ESAI_ESR, &esr); + regmap_read(esai_priv->regmap, REG_ESAI_SAISR, &saisr); + + if ((saisr & (ESAI_SAISR_TUE | ESAI_SAISR_ROE)) && + esai_priv->soc->reset_at_xrun) { + dev_dbg(&pdev->dev, "reset module for xrun\n"); + regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, + ESAI_xCR_xEIE_MASK, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR, + ESAI_xCR_xEIE_MASK, 0); + schedule_work(&esai_priv->work); + } + + if (esr & ESAI_ESR_TINIT_MASK) + dev_dbg(&pdev->dev, "isr: Transmission Initialized\n"); + + if (esr & ESAI_ESR_RFF_MASK) + dev_warn(&pdev->dev, "isr: Receiving overrun\n"); + + if (esr & ESAI_ESR_TFE_MASK) + dev_warn(&pdev->dev, "isr: Transmission underrun\n"); + + if (esr & ESAI_ESR_TLS_MASK) + dev_dbg(&pdev->dev, "isr: Just transmitted the last slot\n"); + + if (esr & ESAI_ESR_TDE_MASK) + dev_dbg(&pdev->dev, "isr: Transmission data exception\n"); + + if (esr & ESAI_ESR_TED_MASK) + dev_dbg(&pdev->dev, "isr: Transmitting even slots\n"); + + if (esr & ESAI_ESR_TD_MASK) + dev_dbg(&pdev->dev, "isr: Transmitting data\n"); + + if (esr & ESAI_ESR_RLS_MASK) + dev_dbg(&pdev->dev, "isr: Just received the last slot\n"); + + if (esr & ESAI_ESR_RDE_MASK) + dev_dbg(&pdev->dev, "isr: Receiving data exception\n"); + + if (esr & ESAI_ESR_RED_MASK) + dev_dbg(&pdev->dev, "isr: Receiving even slots\n"); + + if (esr & ESAI_ESR_RD_MASK) + dev_dbg(&pdev->dev, "isr: Receiving data\n"); + + return IRQ_HANDLED; +} + +/** + * fsl_esai_divisor_cal - This function is used to calculate the + * divisors of psr, pm, fp and it is supposed to be called in + * set_dai_sysclk() and set_bclk(). + * + * @dai: pointer to DAI + * @tx: current setting is for playback or capture + * @ratio: desired overall ratio for the paticipating dividers + * @usefp: for HCK setting, there is no need to set fp divider + * @fp: bypass other dividers by setting fp directly if fp != 0 + */ +static int fsl_esai_divisor_cal(struct snd_soc_dai *dai, bool tx, u32 ratio, + bool usefp, u32 fp) +{ + struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); + u32 psr, pm = 999, maxfp, prod, sub, savesub, i, j; + + maxfp = usefp ? 16 : 1; + + if (usefp && fp) + goto out_fp; + + if (ratio > 2 * 8 * 256 * maxfp || ratio < 2) { + dev_err(dai->dev, "the ratio is out of range (2 ~ %d)\n", + 2 * 8 * 256 * maxfp); + return -EINVAL; + } else if (ratio % 2) { + dev_err(dai->dev, "the raio must be even if using upper divider\n"); + return -EINVAL; + } + + ratio /= 2; + + psr = ratio <= 256 * maxfp ? ESAI_xCCR_xPSR_BYPASS : ESAI_xCCR_xPSR_DIV8; + + /* Do not loop-search if PM (1 ~ 256) alone can serve the ratio */ + if (ratio <= 256) { + pm = ratio; + fp = 1; + goto out; + } + + /* Set the max fluctuation -- 0.1% of the max devisor */ + savesub = (psr ? 1 : 8) * 256 * maxfp / 1000; + + /* Find the best value for PM */ + for (i = 1; i <= 256; i++) { + for (j = 1; j <= maxfp; j++) { + /* PSR (1 or 8) * PM (1 ~ 256) * FP (1 ~ 16) */ + prod = (psr ? 1 : 8) * i * j; + + if (prod == ratio) + sub = 0; + else if (prod / ratio == 1) + sub = prod - ratio; + else if (ratio / prod == 1) + sub = ratio - prod; + else + continue; + + /* Calculate the fraction */ + sub = sub * 1000 / ratio; + if (sub < savesub) { + savesub = sub; + pm = i; + fp = j; + } + + /* We are lucky */ + if (savesub == 0) + goto out; + } + } + + if (pm == 999) { + dev_err(dai->dev, "failed to calculate proper divisors\n"); + return -EINVAL; + } + +out: + regmap_update_bits(esai_priv->regmap, REG_ESAI_xCCR(tx), + ESAI_xCCR_xPSR_MASK | ESAI_xCCR_xPM_MASK, + psr | ESAI_xCCR_xPM(pm)); + +out_fp: + /* Bypass fp if not being required */ + if (maxfp <= 1) + return 0; + + regmap_update_bits(esai_priv->regmap, REG_ESAI_xCCR(tx), + ESAI_xCCR_xFP_MASK, ESAI_xCCR_xFP(fp)); + + return 0; +} + +/** + * fsl_esai_set_dai_sysclk - configure the clock frequency of MCLK (HCKT/HCKR) + * @dai: pointer to DAI + * @clk_id: The clock source of HCKT/HCKR + * (Input from outside; output from inside, FSYS or EXTAL) + * @freq: The required clock rate of HCKT/HCKR + * @dir: The clock direction of HCKT/HCKR + * + * Note: If the direction is input, we do not care about clk_id. + */ +static int fsl_esai_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, + unsigned int freq, int dir) +{ + struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); + struct clk *clksrc = esai_priv->extalclk; + bool tx = (clk_id <= ESAI_HCKT_EXTAL || esai_priv->synchronous); + bool in = dir == SND_SOC_CLOCK_IN; + u32 ratio, ecr = 0; + unsigned long clk_rate; + int ret; + + if (freq == 0) { + dev_err(dai->dev, "%sput freq of HCK%c should not be 0Hz\n", + in ? "in" : "out", tx ? 'T' : 'R'); + return -EINVAL; + } + + /* Bypass divider settings if the requirement doesn't change */ + if (freq == esai_priv->hck_rate[tx] && dir == esai_priv->hck_dir[tx]) + return 0; + + /* sck_div can be only bypassed if ETO/ERO=0 and SNC_SOC_CLOCK_OUT */ + esai_priv->sck_div[tx] = true; + + /* Set the direction of HCKT/HCKR pins */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_xCCR(tx), + ESAI_xCCR_xHCKD, in ? 0 : ESAI_xCCR_xHCKD); + + if (in) + goto out; + + switch (clk_id) { + case ESAI_HCKT_FSYS: + case ESAI_HCKR_FSYS: + clksrc = esai_priv->fsysclk; + break; + case ESAI_HCKT_EXTAL: + ecr |= ESAI_ECR_ETI; + break; + case ESAI_HCKR_EXTAL: + ecr |= esai_priv->synchronous ? ESAI_ECR_ETI : ESAI_ECR_ERI; + break; + default: + return -EINVAL; + } + + if (IS_ERR(clksrc)) { + dev_err(dai->dev, "no assigned %s clock\n", + (clk_id % 2) ? "extal" : "fsys"); + return PTR_ERR(clksrc); + } + clk_rate = clk_get_rate(clksrc); + + ratio = clk_rate / freq; + if (ratio * freq > clk_rate) + ret = ratio * freq - clk_rate; + else if (ratio * freq < clk_rate) + ret = clk_rate - ratio * freq; + else + ret = 0; + + /* Block if clock source can not be divided into the required rate */ + if (ret != 0 && clk_rate / ret < 1000) { + dev_err(dai->dev, "failed to derive required HCK%c rate\n", + tx ? 'T' : 'R'); + return -EINVAL; + } + + /* Only EXTAL source can be output directly without using PSR and PM */ + if (ratio == 1 && clksrc == esai_priv->extalclk) { + /* Bypass all the dividers if not being needed */ + ecr |= tx ? ESAI_ECR_ETO : ESAI_ECR_ERO; + goto out; + } else if (ratio < 2) { + /* The ratio should be no less than 2 if using other sources */ + dev_err(dai->dev, "failed to derive required HCK%c rate\n", + tx ? 'T' : 'R'); + return -EINVAL; + } + + ret = fsl_esai_divisor_cal(dai, tx, ratio, false, 0); + if (ret) + return ret; + + esai_priv->sck_div[tx] = false; + +out: + esai_priv->hck_dir[tx] = dir; + esai_priv->hck_rate[tx] = freq; + + regmap_update_bits(esai_priv->regmap, REG_ESAI_ECR, + tx ? ESAI_ECR_ETI | ESAI_ECR_ETO : + ESAI_ECR_ERI | ESAI_ECR_ERO, ecr); + + return 0; +} + +/** + * fsl_esai_set_bclk - configure the related dividers according to the bclk rate + * @dai: pointer to DAI + * @tx: direction boolean + * @freq: bclk freq + */ +static int fsl_esai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq) +{ + struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); + u32 hck_rate = esai_priv->hck_rate[tx]; + u32 sub, ratio = hck_rate / freq; + int ret; + + /* Don't apply for fully consumer mode or unchanged bclk */ + if (esai_priv->consumer_mode || esai_priv->sck_rate[tx] == freq) + return 0; + + if (ratio * freq > hck_rate) + sub = ratio * freq - hck_rate; + else if (ratio * freq < hck_rate) + sub = hck_rate - ratio * freq; + else + sub = 0; + + /* Block if clock source can not be divided into the required rate */ + if (sub != 0 && hck_rate / sub < 1000) { + dev_err(dai->dev, "failed to derive required SCK%c rate\n", + tx ? 'T' : 'R'); + return -EINVAL; + } + + /* The ratio should be contented by FP alone if bypassing PM and PSR */ + if (!esai_priv->sck_div[tx] && (ratio > 16 || ratio == 0)) { + dev_err(dai->dev, "the ratio is out of range (1 ~ 16)\n"); + return -EINVAL; + } + + ret = fsl_esai_divisor_cal(dai, tx, ratio, true, + esai_priv->sck_div[tx] ? 0 : ratio); + if (ret) + return ret; + + /* Save current bclk rate */ + esai_priv->sck_rate[tx] = freq; + + return 0; +} + +static int fsl_esai_set_dai_tdm_slot(struct snd_soc_dai *dai, u32 tx_mask, + u32 rx_mask, int slots, int slot_width) +{ + struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); + + regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR, + ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(slots)); + + regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR, + ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(slots)); + + esai_priv->slot_width = slot_width; + esai_priv->slots = slots; + esai_priv->tx_mask = tx_mask; + esai_priv->rx_mask = rx_mask; + + return 0; +} + +static int fsl_esai_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); + u32 xcr = 0, xccr = 0, mask; + + /* DAI mode */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + /* Data on rising edge of bclk, frame low, 1clk before data */ + xcr |= ESAI_xCR_xFSR; + xccr |= ESAI_xCCR_xFSP | ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP; + break; + case SND_SOC_DAIFMT_LEFT_J: + /* Data on rising edge of bclk, frame high */ + xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP; + break; + case SND_SOC_DAIFMT_RIGHT_J: + /* Data on rising edge of bclk, frame high, right aligned */ + xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP; + xcr |= ESAI_xCR_xWA; + break; + case SND_SOC_DAIFMT_DSP_A: + /* Data on rising edge of bclk, frame high, 1clk before data */ + xcr |= ESAI_xCR_xFSL | ESAI_xCR_xFSR; + xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP; + break; + case SND_SOC_DAIFMT_DSP_B: + /* Data on rising edge of bclk, frame high */ + xcr |= ESAI_xCR_xFSL; + xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP; + break; + default: + return -EINVAL; + } + + /* DAI clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + /* Nothing to do for both normal cases */ + break; + case SND_SOC_DAIFMT_IB_NF: + /* Invert bit clock */ + xccr ^= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP; + break; + case SND_SOC_DAIFMT_NB_IF: + /* Invert frame clock */ + xccr ^= ESAI_xCCR_xFSP; + break; + case SND_SOC_DAIFMT_IB_IF: + /* Invert both clocks */ + xccr ^= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP | ESAI_xCCR_xFSP; + break; + default: + return -EINVAL; + } + + esai_priv->consumer_mode = false; + + /* DAI clock provider masks */ + switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) { + case SND_SOC_DAIFMT_BC_FC: + esai_priv->consumer_mode = true; + break; + case SND_SOC_DAIFMT_BP_FC: + xccr |= ESAI_xCCR_xCKD; + break; + case SND_SOC_DAIFMT_BC_FP: + xccr |= ESAI_xCCR_xFSD; + break; + case SND_SOC_DAIFMT_BP_FP: + xccr |= ESAI_xCCR_xFSD | ESAI_xCCR_xCKD; + break; + default: + return -EINVAL; + } + + mask = ESAI_xCR_xFSL | ESAI_xCR_xFSR | ESAI_xCR_xWA; + regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, mask, xcr); + regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR, mask, xcr); + + mask = ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP | ESAI_xCCR_xFSP | + ESAI_xCCR_xFSD | ESAI_xCCR_xCKD; + regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR, mask, xccr); + regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR, mask, xccr); + + return 0; +} + +static int fsl_esai_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); + + if (!snd_soc_dai_active(dai)) { + /* Set synchronous mode */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_SAICR, + ESAI_SAICR_SYNC, esai_priv->synchronous ? + ESAI_SAICR_SYNC : 0); + + /* Set slots count */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR, + ESAI_xCCR_xDC_MASK, + ESAI_xCCR_xDC(esai_priv->slots)); + regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR, + ESAI_xCCR_xDC_MASK, + ESAI_xCCR_xDC(esai_priv->slots)); + } + + return 0; + +} + +static int fsl_esai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; + u32 width = params_width(params); + u32 channels = params_channels(params); + u32 pins = DIV_ROUND_UP(channels, esai_priv->slots); + u32 slot_width = width; + u32 bclk, mask, val; + int ret; + + /* Override slot_width if being specifically set */ + if (esai_priv->slot_width) + slot_width = esai_priv->slot_width; + + bclk = params_rate(params) * slot_width * esai_priv->slots; + + ret = fsl_esai_set_bclk(dai, esai_priv->synchronous || tx, bclk); + if (ret) + return ret; + + mask = ESAI_xCR_xSWS_MASK; + val = ESAI_xCR_xSWS(slot_width, width); + + regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), mask, val); + /* Recording in synchronous mode needs to set TCR also */ + if (!tx && esai_priv->synchronous) + regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, mask, val); + + /* Use Normal mode to support monaural audio */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), + ESAI_xCR_xMOD_MASK, params_channels(params) > 1 ? + ESAI_xCR_xMOD_NETWORK : 0); + + regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), + ESAI_xFCR_xFR_MASK, ESAI_xFCR_xFR); + + mask = ESAI_xFCR_xFR_MASK | ESAI_xFCR_xWA_MASK | ESAI_xFCR_xFWM_MASK | + (tx ? ESAI_xFCR_TE_MASK | ESAI_xFCR_TIEN : ESAI_xFCR_RE_MASK); + val = ESAI_xFCR_xWA(width) | ESAI_xFCR_xFWM(esai_priv->fifo_depth) | + (tx ? ESAI_xFCR_TE(pins) | ESAI_xFCR_TIEN : ESAI_xFCR_RE(pins)); + + regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), mask, val); + + if (tx) + regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, + ESAI_xCR_PADC, ESAI_xCR_PADC); + + /* Remove ESAI personal reset by configuring ESAI_PCRC and ESAI_PRRC */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC, + ESAI_PRRC_PDC_MASK, ESAI_PRRC_PDC(ESAI_GPIO)); + regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC, + ESAI_PCRC_PC_MASK, ESAI_PCRC_PC(ESAI_GPIO)); + return 0; +} + +static int fsl_esai_hw_init(struct fsl_esai *esai_priv) +{ + struct platform_device *pdev = esai_priv->pdev; + int ret; + + /* Reset ESAI unit */ + ret = regmap_update_bits(esai_priv->regmap, REG_ESAI_ECR, + ESAI_ECR_ESAIEN_MASK | ESAI_ECR_ERST_MASK, + ESAI_ECR_ESAIEN | ESAI_ECR_ERST); + if (ret) { + dev_err(&pdev->dev, "failed to reset ESAI: %d\n", ret); + return ret; + } + + /* + * We need to enable ESAI so as to access some of its registers. + * Otherwise, we would fail to dump regmap from user space. + */ + ret = regmap_update_bits(esai_priv->regmap, REG_ESAI_ECR, + ESAI_ECR_ESAIEN_MASK | ESAI_ECR_ERST_MASK, + ESAI_ECR_ESAIEN); + if (ret) { + dev_err(&pdev->dev, "failed to enable ESAI: %d\n", ret); + return ret; + } + + regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC, + ESAI_PRRC_PDC_MASK, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC, + ESAI_PCRC_PC_MASK, 0); + + return 0; +} + +static int fsl_esai_register_restore(struct fsl_esai *esai_priv) +{ + int ret; + + /* FIFO reset for safety */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_TFCR, + ESAI_xFCR_xFR, ESAI_xFCR_xFR); + regmap_update_bits(esai_priv->regmap, REG_ESAI_RFCR, + ESAI_xFCR_xFR, ESAI_xFCR_xFR); + + regcache_mark_dirty(esai_priv->regmap); + ret = regcache_sync(esai_priv->regmap); + if (ret) + return ret; + + /* FIFO reset done */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_TFCR, ESAI_xFCR_xFR, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_RFCR, ESAI_xFCR_xFR, 0); + + return 0; +} + +static void fsl_esai_trigger_start(struct fsl_esai *esai_priv, bool tx) +{ + u8 i, channels = esai_priv->channels[tx]; + u32 pins = DIV_ROUND_UP(channels, esai_priv->slots); + u32 mask; + + regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), + ESAI_xFCR_xFEN_MASK, ESAI_xFCR_xFEN); + + /* Write initial words reqiured by ESAI as normal procedure */ + for (i = 0; tx && i < channels; i++) + regmap_write(esai_priv->regmap, REG_ESAI_ETDR, 0x0); + + /* + * When set the TE/RE in the end of enablement flow, there + * will be channel swap issue for multi data line case. + * In order to workaround this issue, we switch the bit + * enablement sequence to below sequence + * 1) clear the xSMB & xSMA: which is done in probe and + * stop state. + * 2) set TE/RE + * 3) set xSMB + * 4) set xSMA: xSMA is the last one in this flow, which + * will trigger esai to start. + */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), + tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, + tx ? ESAI_xCR_TE(pins) : ESAI_xCR_RE(pins)); + mask = tx ? esai_priv->tx_mask : esai_priv->rx_mask; + + regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx), + ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(mask)); + regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx), + ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(mask)); + + /* Enable Exception interrupt */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), + ESAI_xCR_xEIE_MASK, ESAI_xCR_xEIE); +} + +static void fsl_esai_trigger_stop(struct fsl_esai *esai_priv, bool tx) +{ + regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), + ESAI_xCR_xEIE_MASK, 0); + + regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), + tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx), + ESAI_xSMA_xS_MASK, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx), + ESAI_xSMB_xS_MASK, 0); + + /* Disable and reset FIFO */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), + ESAI_xFCR_xFR | ESAI_xFCR_xFEN, ESAI_xFCR_xFR); + regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), + ESAI_xFCR_xFR, 0); +} + +static void fsl_esai_hw_reset(struct work_struct *work) +{ + struct fsl_esai *esai_priv = container_of(work, struct fsl_esai, work); + bool tx = true, rx = false, enabled[2]; + unsigned long lock_flags; + u32 tfcr, rfcr; + + spin_lock_irqsave(&esai_priv->lock, lock_flags); + /* Save the registers */ + regmap_read(esai_priv->regmap, REG_ESAI_TFCR, &tfcr); + regmap_read(esai_priv->regmap, REG_ESAI_RFCR, &rfcr); + enabled[tx] = tfcr & ESAI_xFCR_xFEN; + enabled[rx] = rfcr & ESAI_xFCR_xFEN; + + /* Stop the tx & rx */ + fsl_esai_trigger_stop(esai_priv, tx); + fsl_esai_trigger_stop(esai_priv, rx); + + /* Reset the esai, and ignore return value */ + fsl_esai_hw_init(esai_priv); + + /* Enforce ESAI personal resets for both TX and RX */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, + ESAI_xCR_xPR_MASK, ESAI_xCR_xPR); + regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR, + ESAI_xCR_xPR_MASK, ESAI_xCR_xPR); + + /* Restore registers by regcache_sync, and ignore return value */ + fsl_esai_register_restore(esai_priv); + + /* Remove ESAI personal resets by configuring PCRC and PRRC also */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, + ESAI_xCR_xPR_MASK, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR, + ESAI_xCR_xPR_MASK, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC, + ESAI_PRRC_PDC_MASK, ESAI_PRRC_PDC(ESAI_GPIO)); + regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC, + ESAI_PCRC_PC_MASK, ESAI_PCRC_PC(ESAI_GPIO)); + + /* Restart tx / rx, if they already enabled */ + if (enabled[tx]) + fsl_esai_trigger_start(esai_priv, tx); + if (enabled[rx]) + fsl_esai_trigger_start(esai_priv, rx); + + spin_unlock_irqrestore(&esai_priv->lock, lock_flags); +} + +static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; + unsigned long lock_flags; + + esai_priv->channels[tx] = substream->runtime->channels; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + spin_lock_irqsave(&esai_priv->lock, lock_flags); + fsl_esai_trigger_start(esai_priv, tx); + spin_unlock_irqrestore(&esai_priv->lock, lock_flags); + break; + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + spin_lock_irqsave(&esai_priv->lock, lock_flags); + fsl_esai_trigger_stop(esai_priv, tx); + spin_unlock_irqrestore(&esai_priv->lock, lock_flags); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int fsl_esai_dai_probe(struct snd_soc_dai *dai) +{ + struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); + + snd_soc_dai_init_dma_data(dai, &esai_priv->dma_params_tx, + &esai_priv->dma_params_rx); + + return 0; +} + +static const struct snd_soc_dai_ops fsl_esai_dai_ops = { + .probe = fsl_esai_dai_probe, + .startup = fsl_esai_startup, + .trigger = fsl_esai_trigger, + .hw_params = fsl_esai_hw_params, + .set_sysclk = fsl_esai_set_dai_sysclk, + .set_fmt = fsl_esai_set_dai_fmt, + .set_tdm_slot = fsl_esai_set_dai_tdm_slot, +}; + +static struct snd_soc_dai_driver fsl_esai_dai = { + .playback = { + .stream_name = "CPU-Playback", + .channels_min = 1, + .channels_max = 12, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = FSL_ESAI_FORMATS, + }, + .capture = { + .stream_name = "CPU-Capture", + .channels_min = 1, + .channels_max = 8, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = FSL_ESAI_FORMATS, + }, + .ops = &fsl_esai_dai_ops, +}; + +static const struct snd_soc_component_driver fsl_esai_component = { + .name = "fsl-esai", + .legacy_dai_naming = 1, +}; + +static const struct reg_default fsl_esai_reg_defaults[] = { + {REG_ESAI_ETDR, 0x00000000}, + {REG_ESAI_ECR, 0x00000000}, + {REG_ESAI_TFCR, 0x00000000}, + {REG_ESAI_RFCR, 0x00000000}, + {REG_ESAI_TX0, 0x00000000}, + {REG_ESAI_TX1, 0x00000000}, + {REG_ESAI_TX2, 0x00000000}, + {REG_ESAI_TX3, 0x00000000}, + {REG_ESAI_TX4, 0x00000000}, + {REG_ESAI_TX5, 0x00000000}, + {REG_ESAI_TSR, 0x00000000}, + {REG_ESAI_SAICR, 0x00000000}, + {REG_ESAI_TCR, 0x00000000}, + {REG_ESAI_TCCR, 0x00000000}, + {REG_ESAI_RCR, 0x00000000}, + {REG_ESAI_RCCR, 0x00000000}, + {REG_ESAI_TSMA, 0x0000ffff}, + {REG_ESAI_TSMB, 0x0000ffff}, + {REG_ESAI_RSMA, 0x0000ffff}, + {REG_ESAI_RSMB, 0x0000ffff}, + {REG_ESAI_PRRC, 0x00000000}, + {REG_ESAI_PCRC, 0x00000000}, +}; + +static bool fsl_esai_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case REG_ESAI_ERDR: + case REG_ESAI_ECR: + case REG_ESAI_ESR: + case REG_ESAI_TFCR: + case REG_ESAI_TFSR: + case REG_ESAI_RFCR: + case REG_ESAI_RFSR: + case REG_ESAI_RX0: + case REG_ESAI_RX1: + case REG_ESAI_RX2: + case REG_ESAI_RX3: + case REG_ESAI_SAISR: + case REG_ESAI_SAICR: + case REG_ESAI_TCR: + case REG_ESAI_TCCR: + case REG_ESAI_RCR: + case REG_ESAI_RCCR: + case REG_ESAI_TSMA: + case REG_ESAI_TSMB: + case REG_ESAI_RSMA: + case REG_ESAI_RSMB: + case REG_ESAI_PRRC: + case REG_ESAI_PCRC: + return true; + default: + return false; + } +} + +static bool fsl_esai_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case REG_ESAI_ERDR: + case REG_ESAI_ESR: + case REG_ESAI_TFSR: + case REG_ESAI_RFSR: + case REG_ESAI_RX0: + case REG_ESAI_RX1: + case REG_ESAI_RX2: + case REG_ESAI_RX3: + case REG_ESAI_SAISR: + return true; + default: + return false; + } +} + +static bool fsl_esai_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case REG_ESAI_ETDR: + case REG_ESAI_ECR: + case REG_ESAI_TFCR: + case REG_ESAI_RFCR: + case REG_ESAI_TX0: + case REG_ESAI_TX1: + case REG_ESAI_TX2: + case REG_ESAI_TX3: + case REG_ESAI_TX4: + case REG_ESAI_TX5: + case REG_ESAI_TSR: + case REG_ESAI_SAICR: + case REG_ESAI_TCR: + case REG_ESAI_TCCR: + case REG_ESAI_RCR: + case REG_ESAI_RCCR: + case REG_ESAI_TSMA: + case REG_ESAI_TSMB: + case REG_ESAI_RSMA: + case REG_ESAI_RSMB: + case REG_ESAI_PRRC: + case REG_ESAI_PCRC: + return true; + default: + return false; + } +} + +static const struct regmap_config fsl_esai_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + + .max_register = REG_ESAI_PCRC, + .reg_defaults = fsl_esai_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(fsl_esai_reg_defaults), + .readable_reg = fsl_esai_readable_reg, + .volatile_reg = fsl_esai_volatile_reg, + .writeable_reg = fsl_esai_writeable_reg, + .cache_type = REGCACHE_FLAT, +}; + +static int fsl_esai_runtime_resume(struct device *dev); +static int fsl_esai_runtime_suspend(struct device *dev); + +static int fsl_esai_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct fsl_esai *esai_priv; + struct resource *res; + const __be32 *iprop; + void __iomem *regs; + int irq, ret; + + esai_priv = devm_kzalloc(&pdev->dev, sizeof(*esai_priv), GFP_KERNEL); + if (!esai_priv) + return -ENOMEM; + + esai_priv->pdev = pdev; + snprintf(esai_priv->name, sizeof(esai_priv->name), "%pOFn", np); + + esai_priv->soc = of_device_get_match_data(&pdev->dev); + + /* Get the addresses and IRQ */ + regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + esai_priv->regmap = devm_regmap_init_mmio(&pdev->dev, regs, &fsl_esai_regmap_config); + if (IS_ERR(esai_priv->regmap)) { + dev_err(&pdev->dev, "failed to init regmap: %ld\n", + PTR_ERR(esai_priv->regmap)); + return PTR_ERR(esai_priv->regmap); + } + + esai_priv->coreclk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(esai_priv->coreclk)) { + dev_err(&pdev->dev, "failed to get core clock: %ld\n", + PTR_ERR(esai_priv->coreclk)); + return PTR_ERR(esai_priv->coreclk); + } + + esai_priv->extalclk = devm_clk_get(&pdev->dev, "extal"); + if (IS_ERR(esai_priv->extalclk)) + dev_warn(&pdev->dev, "failed to get extal clock: %ld\n", + PTR_ERR(esai_priv->extalclk)); + + esai_priv->fsysclk = devm_clk_get(&pdev->dev, "fsys"); + if (IS_ERR(esai_priv->fsysclk)) + dev_warn(&pdev->dev, "failed to get fsys clock: %ld\n", + PTR_ERR(esai_priv->fsysclk)); + + esai_priv->spbaclk = devm_clk_get(&pdev->dev, "spba"); + if (IS_ERR(esai_priv->spbaclk)) + dev_warn(&pdev->dev, "failed to get spba clock: %ld\n", + PTR_ERR(esai_priv->spbaclk)); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ret = devm_request_irq(&pdev->dev, irq, esai_isr, IRQF_SHARED, + esai_priv->name, esai_priv); + if (ret) { + dev_err(&pdev->dev, "failed to claim irq %u\n", irq); + return ret; + } + + /* Set a default slot number */ + esai_priv->slots = 2; + + /* Set a default clock provider state */ + esai_priv->consumer_mode = true; + + /* Determine the FIFO depth */ + iprop = of_get_property(np, "fsl,fifo-depth", NULL); + if (iprop) + esai_priv->fifo_depth = be32_to_cpup(iprop); + else + esai_priv->fifo_depth = 64; + + esai_priv->dma_params_tx.maxburst = 16; + esai_priv->dma_params_rx.maxburst = 16; + esai_priv->dma_params_tx.addr = res->start + REG_ESAI_ETDR; + esai_priv->dma_params_rx.addr = res->start + REG_ESAI_ERDR; + + esai_priv->synchronous = + of_property_read_bool(np, "fsl,esai-synchronous"); + + /* Implement full symmetry for synchronous mode */ + if (esai_priv->synchronous) { + fsl_esai_dai.symmetric_rate = 1; + fsl_esai_dai.symmetric_channels = 1; + fsl_esai_dai.symmetric_sample_bits = 1; + } + + dev_set_drvdata(&pdev->dev, esai_priv); + spin_lock_init(&esai_priv->lock); + pm_runtime_enable(&pdev->dev); + if (!pm_runtime_enabled(&pdev->dev)) { + ret = fsl_esai_runtime_resume(&pdev->dev); + if (ret) + goto err_pm_disable; + } + + ret = pm_runtime_resume_and_get(&pdev->dev); + if (ret < 0) + goto err_pm_get_sync; + + ret = fsl_esai_hw_init(esai_priv); + if (ret) + goto err_pm_get_sync; + + esai_priv->tx_mask = 0xFFFFFFFF; + esai_priv->rx_mask = 0xFFFFFFFF; + + /* Clear the TSMA, TSMB, RSMA, RSMB */ + regmap_write(esai_priv->regmap, REG_ESAI_TSMA, 0); + regmap_write(esai_priv->regmap, REG_ESAI_TSMB, 0); + regmap_write(esai_priv->regmap, REG_ESAI_RSMA, 0); + regmap_write(esai_priv->regmap, REG_ESAI_RSMB, 0); + + ret = pm_runtime_put_sync(&pdev->dev); + if (ret < 0 && ret != -ENOSYS) + goto err_pm_get_sync; + + /* + * Register platform component before registering cpu dai for there + * is not defer probe for platform component in snd_soc_add_pcm_runtime(). + */ + ret = imx_pcm_dma_init(pdev); + if (ret) { + dev_err(&pdev->dev, "failed to init imx pcm dma: %d\n", ret); + goto err_pm_get_sync; + } + + ret = devm_snd_soc_register_component(&pdev->dev, &fsl_esai_component, + &fsl_esai_dai, 1); + if (ret) { + dev_err(&pdev->dev, "failed to register DAI: %d\n", ret); + goto err_pm_get_sync; + } + + INIT_WORK(&esai_priv->work, fsl_esai_hw_reset); + + return ret; + +err_pm_get_sync: + if (!pm_runtime_status_suspended(&pdev->dev)) + fsl_esai_runtime_suspend(&pdev->dev); +err_pm_disable: + pm_runtime_disable(&pdev->dev); + return ret; +} + +static void fsl_esai_remove(struct platform_device *pdev) +{ + struct fsl_esai *esai_priv = platform_get_drvdata(pdev); + + pm_runtime_disable(&pdev->dev); + if (!pm_runtime_status_suspended(&pdev->dev)) + fsl_esai_runtime_suspend(&pdev->dev); + + cancel_work_sync(&esai_priv->work); +} + +static const struct of_device_id fsl_esai_dt_ids[] = { + { .compatible = "fsl,imx35-esai", .data = &fsl_esai_imx35 }, + { .compatible = "fsl,vf610-esai", .data = &fsl_esai_vf610 }, + { .compatible = "fsl,imx6ull-esai", .data = &fsl_esai_imx6ull }, + {} +}; +MODULE_DEVICE_TABLE(of, fsl_esai_dt_ids); + +static int fsl_esai_runtime_resume(struct device *dev) +{ + struct fsl_esai *esai = dev_get_drvdata(dev); + int ret; + + /* + * Some platforms might use the same bit to gate all three or two of + * clocks, so keep all clocks open/close at the same time for safety + */ + ret = clk_prepare_enable(esai->coreclk); + if (ret) + return ret; + if (!IS_ERR(esai->spbaclk)) { + ret = clk_prepare_enable(esai->spbaclk); + if (ret) + goto err_spbaclk; + } + if (!IS_ERR(esai->extalclk)) { + ret = clk_prepare_enable(esai->extalclk); + if (ret) + goto err_extalclk; + } + if (!IS_ERR(esai->fsysclk)) { + ret = clk_prepare_enable(esai->fsysclk); + if (ret) + goto err_fsysclk; + } + + regcache_cache_only(esai->regmap, false); + + ret = fsl_esai_register_restore(esai); + if (ret) + goto err_regcache_sync; + + return 0; + +err_regcache_sync: + if (!IS_ERR(esai->fsysclk)) + clk_disable_unprepare(esai->fsysclk); +err_fsysclk: + if (!IS_ERR(esai->extalclk)) + clk_disable_unprepare(esai->extalclk); +err_extalclk: + if (!IS_ERR(esai->spbaclk)) + clk_disable_unprepare(esai->spbaclk); +err_spbaclk: + clk_disable_unprepare(esai->coreclk); + + return ret; +} + +static int fsl_esai_runtime_suspend(struct device *dev) +{ + struct fsl_esai *esai = dev_get_drvdata(dev); + + regcache_cache_only(esai->regmap, true); + + if (!IS_ERR(esai->fsysclk)) + clk_disable_unprepare(esai->fsysclk); + if (!IS_ERR(esai->extalclk)) + clk_disable_unprepare(esai->extalclk); + if (!IS_ERR(esai->spbaclk)) + clk_disable_unprepare(esai->spbaclk); + clk_disable_unprepare(esai->coreclk); + + return 0; +} + +static const struct dev_pm_ops fsl_esai_pm_ops = { + SET_RUNTIME_PM_OPS(fsl_esai_runtime_suspend, + fsl_esai_runtime_resume, + NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) +}; + +static struct platform_driver fsl_esai_driver = { + .probe = fsl_esai_probe, + .remove_new = fsl_esai_remove, + .driver = { + .name = "fsl-esai-dai", + .pm = &fsl_esai_pm_ops, + .of_match_table = fsl_esai_dt_ids, + }, +}; + +module_platform_driver(fsl_esai_driver); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("Freescale ESAI CPU DAI driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:fsl-esai-dai"); |