1 files changed, 339 insertions, 0 deletions
diff --git a/sound/soc/intel/boards/bdw-rt5650.c b/sound/soc/intel/boards/bdw-rt5650.c
new file mode 100644
index 0000000000..d0682bc543
--- /dev/null
+++ b/sound/soc/intel/boards/bdw-rt5650.c
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ASoC machine driver for Intel Broadwell platforms with RT5650 codec
+ *
+ * Copyright 2019, The Chromium OS Authors.  All rights reserved.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/jack.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-acpi.h>
+
+#include "../../codecs/rt5645.h"
+
+struct bdw_rt5650_priv {
+	struct gpio_desc *gpio_hp_en;
+	struct snd_soc_component *component;
+};
+
+static const struct snd_soc_dapm_widget bdw_rt5650_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_SPK("Speaker", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MIC("DMIC Pair1", NULL),
+	SND_SOC_DAPM_MIC("DMIC Pair2", NULL),
+};
+
+static const struct snd_soc_dapm_route bdw_rt5650_map[] = {
+	/* Speakers */
+	{"Speaker", NULL, "SPOL"},
+	{"Speaker", NULL, "SPOR"},
+
+	/* Headset jack connectors */
+	{"Headphone", NULL, "HPOL"},
+	{"Headphone", NULL, "HPOR"},
+	{"IN1P", NULL, "Headset Mic"},
+	{"IN1N", NULL, "Headset Mic"},
+
+	/* Digital MICs
+	 * DMIC Pair1 are the two DMICs connected on the DMICN1 connector.
+	 * DMIC Pair2 are the two DMICs connected on the DMICN2 connector.
+	 * Facing the camera, DMIC Pair1 are on the left side, DMIC Pair2
+	 * are on the right side.
+	 */
+	{"DMIC L1", NULL, "DMIC Pair1"},
+	{"DMIC R1", NULL, "DMIC Pair1"},
+	{"DMIC L2", NULL, "DMIC Pair2"},
+	{"DMIC R2", NULL, "DMIC Pair2"},
+
+	/* CODEC BE connections */
+	{"SSP0 CODEC IN", NULL, "AIF1 Capture"},
+	{"AIF1 Playback", NULL, "SSP0 CODEC OUT"},
+};
+
+static const struct snd_kcontrol_new bdw_rt5650_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Speaker"),
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("DMIC Pair1"),
+	SOC_DAPM_PIN_SWITCH("DMIC Pair2"),
+};
+
+
+static struct snd_soc_jack headphone_jack;
+static struct snd_soc_jack mic_jack;
+
+static struct snd_soc_jack_pin headphone_jack_pin = {
+	.pin	= "Headphone",
+	.mask	= SND_JACK_HEADPHONE,
+};
+
+static struct snd_soc_jack_pin mic_jack_pin = {
+	.pin	= "Headset Mic",
+	.mask	= SND_JACK_MICROPHONE,
+};
+
+static int broadwell_ssp0_fixup(struct snd_soc_pcm_runtime *rtd,
+			struct snd_pcm_hw_params *params)
+{
+	struct snd_interval *rate = hw_param_interval(params,
+						      SNDRV_PCM_HW_PARAM_RATE);
+	struct snd_interval *chan = hw_param_interval(params,
+						      SNDRV_PCM_HW_PARAM_CHANNELS);
+
+	/* The ADSP will convert the FE rate to 48k, max 4-channels */
+	rate->min = rate->max = 48000;
+	chan->min = 2;
+	chan->max = 4;
+
+	/* set SSP0 to 24 bit */
+	snd_mask_set_format(hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT),
+			    SNDRV_PCM_FORMAT_S24_LE);
+
+	return 0;
+}
+
+static int bdw_rt5650_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	int ret;
+
+	/* Workaround: set codec PLL to 19.2MHz that PLL source is
+	 * from MCLK(24MHz) to conform 2.4MHz DMIC clock.
+	 */
+	ret = snd_soc_dai_set_pll(codec_dai, 0, RT5645_PLL1_S_MCLK,
+		24000000, 19200000);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
+		return ret;
+	}
+
+	/* The actual MCLK freq is 24MHz. The codec is told that MCLK is
+	 * 24.576MHz to satisfy the requirement of rl6231_get_clk_info.
+	 * ASRC is enabled on AD and DA filters to ensure good audio quality.
+	 */
+	ret = snd_soc_dai_set_sysclk(codec_dai, RT5645_SCLK_S_PLL1, 24576000,
+		SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set codec sysclk configuration\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+static struct snd_soc_ops bdw_rt5650_ops = {
+	.hw_params = bdw_rt5650_hw_params,
+};
+
+static const unsigned int channels[] = {
+	2, 4,
+};
+
+static const struct snd_pcm_hw_constraint_list constraints_channels = {
+	.count = ARRAY_SIZE(channels),
+	.list = channels,
+	.mask = 0,
+};
+
+static int bdw_rt5650_fe_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	/* Board supports stereo and quad configurations for capture */
+	if (substream->stream != SNDRV_PCM_STREAM_CAPTURE)
+		return 0;
+
+	runtime->hw.channels_max = 4;
+	return snd_pcm_hw_constraint_list(runtime, 0,
+					  SNDRV_PCM_HW_PARAM_CHANNELS,
+					  &constraints_channels);
+}
+
+static const struct snd_soc_ops bdw_rt5650_fe_ops = {
+	.startup = bdw_rt5650_fe_startup,
+};
+
+static int bdw_rt5650_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct bdw_rt5650_priv *bdw_rt5650 =
+		snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_component *component = codec_dai->component;
+	int ret;
+
+	/* Enable codec ASRC function for Stereo DAC/Stereo1 ADC/DMIC/I2S1.
+	 * The ASRC clock source is clk_i2s1_asrc.
+	 */
+	rt5645_sel_asrc_clk_src(component,
+				RT5645_DA_STEREO_FILTER |
+				RT5645_DA_MONO_L_FILTER |
+				RT5645_DA_MONO_R_FILTER |
+				RT5645_AD_STEREO_FILTER |
+				RT5645_AD_MONO_L_FILTER |
+				RT5645_AD_MONO_R_FILTER,
+				RT5645_CLK_SEL_I2S1_ASRC);
+
+	/* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */
+	ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xF, 0xF, 4, 24);
+
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret);
+		return ret;
+	}
+
+	/* Create and initialize headphone jack */
+	if (snd_soc_card_jack_new_pins(rtd->card, "Headphone Jack",
+			SND_JACK_HEADPHONE, &headphone_jack,
+			&headphone_jack_pin, 1)) {
+		dev_err(component->dev, "Can't create headphone jack\n");
+	}
+
+	/* Create and initialize mic jack */
+	if (snd_soc_card_jack_new_pins(rtd->card, "Mic Jack",
+			SND_JACK_MICROPHONE, &mic_jack, &mic_jack_pin, 1)) {
+		dev_err(component->dev, "Can't create mic jack\n");
+	}
+
+	rt5645_set_jack_detect(component, &headphone_jack, &mic_jack, NULL);
+
+	bdw_rt5650->component = component;
+
+	return 0;
+}
+
+/* broadwell digital audio interface glue - connects codec <--> CPU */
+SND_SOC_DAILINK_DEF(dummy,
+	DAILINK_COMP_ARRAY(COMP_DUMMY()));
+
+SND_SOC_DAILINK_DEF(fe,
+	DAILINK_COMP_ARRAY(COMP_CPU("System Pin")));
+
+SND_SOC_DAILINK_DEF(platform,
+	DAILINK_COMP_ARRAY(COMP_PLATFORM("haswell-pcm-audio")));
+
+SND_SOC_DAILINK_DEF(be,
+	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5650:00", "rt5645-aif1")));
+
+SND_SOC_DAILINK_DEF(ssp0_port,
+	    DAILINK_COMP_ARRAY(COMP_CPU("ssp0-port")));
+
+static struct snd_soc_dai_link bdw_rt5650_dais[] = {
+	/* Front End DAI links */
+	{
+		.name = "System PCM",
+		.stream_name = "System Playback",
+		.nonatomic = 1,
+		.dynamic = 1,
+		.ops = &bdw_rt5650_fe_ops,
+		.trigger = {
+			SND_SOC_DPCM_TRIGGER_POST,
+			SND_SOC_DPCM_TRIGGER_POST
+		},
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		SND_SOC_DAILINK_REG(fe, dummy, platform),
+	},
+
+	/* Back End DAI links */
+	{
+		/* SSP0 - Codec */
+		.name = "Codec",
+		.id = 0,
+		.nonatomic = 1,
+		.no_pcm = 1,
+		.dai_fmt = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_NB_NF |
+			SND_SOC_DAIFMT_CBC_CFC,
+		.ignore_pmdown_time = 1,
+		.be_hw_params_fixup = broadwell_ssp0_fixup,
+		.ops = &bdw_rt5650_ops,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		.init = bdw_rt5650_init,
+		SND_SOC_DAILINK_REG(ssp0_port, be, platform),
+	},
+};
+
+/* use space before codec name to simplify card ID, and simplify driver name */
+#define SOF_CARD_NAME "bdw rt5650" /* card name will be 'sof-bdw rt5650' */
+#define SOF_DRIVER_NAME "SOF"
+
+#define CARD_NAME "bdw-rt5650"
+#define DRIVER_NAME NULL /* card name will be used for driver name */
+
+/* ASoC machine driver for Broadwell DSP + RT5650 */
+static struct snd_soc_card bdw_rt5650_card = {
+	.name = CARD_NAME,
+	.driver_name = DRIVER_NAME,
+	.owner = THIS_MODULE,
+	.dai_link = bdw_rt5650_dais,
+	.num_links = ARRAY_SIZE(bdw_rt5650_dais),
+	.dapm_widgets = bdw_rt5650_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(bdw_rt5650_widgets),
+	.dapm_routes = bdw_rt5650_map,
+	.num_dapm_routes = ARRAY_SIZE(bdw_rt5650_map),
+	.controls = bdw_rt5650_controls,
+	.num_controls = ARRAY_SIZE(bdw_rt5650_controls),
+	.fully_routed = true,
+};
+
+static int bdw_rt5650_probe(struct platform_device *pdev)
+{
+	struct bdw_rt5650_priv *bdw_rt5650;
+	struct snd_soc_acpi_mach *mach;
+	int ret;
+
+	bdw_rt5650_card.dev = &pdev->dev;
+
+	/* Allocate driver private struct */
+	bdw_rt5650 = devm_kzalloc(&pdev->dev, sizeof(struct bdw_rt5650_priv),
+		GFP_KERNEL);
+	if (!bdw_rt5650)
+		return -ENOMEM;
+
+	/* override platform name, if required */
+	mach = pdev->dev.platform_data;
+	ret = snd_soc_fixup_dai_links_platform_name(&bdw_rt5650_card,
+						    mach->mach_params.platform);
+
+	if (ret)
+		return ret;
+
+	/* set card and driver name */
+	if (snd_soc_acpi_sof_parent(&pdev->dev)) {
+		bdw_rt5650_card.name = SOF_CARD_NAME;
+		bdw_rt5650_card.driver_name = SOF_DRIVER_NAME;
+	} else {
+		bdw_rt5650_card.name = CARD_NAME;
+		bdw_rt5650_card.driver_name = DRIVER_NAME;
+	}
+
+	snd_soc_card_set_drvdata(&bdw_rt5650_card, bdw_rt5650);
+
+	return devm_snd_soc_register_card(&pdev->dev, &bdw_rt5650_card);
+}
+
+static struct platform_driver bdw_rt5650_audio = {
+	.probe = bdw_rt5650_probe,
+	.driver = {
+		.name = "bdw-rt5650",
+		.pm = &snd_soc_pm_ops,
+	},
+};
+
+module_platform_driver(bdw_rt5650_audio)
+
+/* Module information */
+MODULE_AUTHOR("Ben Zhang <benzh@chromium.org>");
+MODULE_DESCRIPTION("Intel Broadwell RT5650 machine driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:bdw-rt5650");