diff options
Diffstat (limited to '')
| -rw-r--r-- | sound/soc/pxa/mmp-sspa.h | 70 |
1 files changed, 70 insertions, 0 deletions
diff --git a/sound/soc/pxa/mmp-sspa.h b/sound/soc/pxa/mmp-sspa.h new file mode 100644 index 0000000000..938ef2f667 --- /dev/null +++ b/sound/soc/pxa/mmp-sspa.h @@ -0,0 +1,70 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * linux/sound/soc/pxa/mmp-sspa.h + * + * Copyright (C) 2011 Marvell International Ltd. + */ +#ifndef _MMP_SSPA_H +#define _MMP_SSPA_H + +/* + * SSPA Registers + */ +#define SSPA_D (0x00) +#define SSPA_ID (0x04) +#define SSPA_CTL (0x08) +#define SSPA_SP (0x0c) +#define SSPA_FIFO_UL (0x10) +#define SSPA_INT_MASK (0x14) +#define SSPA_C (0x18) +#define SSPA_FIFO_NOFS (0x1c) +#define SSPA_FIFO_SIZE (0x20) + +/* SSPA Control Register */ +#define SSPA_CTL_XPH (1 << 31) /* Read Phase */ +#define SSPA_CTL_XFIG (1 << 15) /* Transmit Zeros when FIFO Empty */ +#define SSPA_CTL_JST (1 << 3) /* Audio Sample Justification */ +#define SSPA_CTL_XFRLEN2_MASK (7 << 24) +#define SSPA_CTL_XFRLEN2(x) ((x) << 24) /* Transmit Frame Length in Phase 2 */ +#define SSPA_CTL_XWDLEN2_MASK (7 << 21) +#define SSPA_CTL_XWDLEN2(x) ((x) << 21) /* Transmit Word Length in Phase 2 */ +#define SSPA_CTL_XDATDLY(x) ((x) << 19) /* Transmit Data Delay */ +#define SSPA_CTL_XSSZ2_MASK (7 << 16) +#define SSPA_CTL_XSSZ2(x) ((x) << 16) /* Transmit Sample Audio Size */ +#define SSPA_CTL_XFRLEN1_MASK (7 << 8) +#define SSPA_CTL_XFRLEN1(x) ((x) << 8) /* Transmit Frame Length in Phase 1 */ +#define SSPA_CTL_XWDLEN1_MASK (7 << 5) +#define SSPA_CTL_XWDLEN1(x) ((x) << 5) /* Transmit Word Length in Phase 1 */ +#define SSPA_CTL_XSSZ1_MASK (7 << 0) +#define SSPA_CTL_XSSZ1(x) ((x) << 0) /* XSSZ1 */ + +#define SSPA_CTL_8_BITS (0x0) /* Sample Size */ +#define SSPA_CTL_12_BITS (0x1) +#define SSPA_CTL_16_BITS (0x2) +#define SSPA_CTL_20_BITS (0x3) +#define SSPA_CTL_24_BITS (0x4) +#define SSPA_CTL_32_BITS (0x5) + +/* SSPA Serial Port Register */ +#define SSPA_SP_WEN (1 << 31) /* Write Configuration Enable */ +#define SSPA_SP_MSL (1 << 18) /* Master Slave Configuration */ +#define SSPA_SP_CLKP (1 << 17) /* CLKP Polarity Clock Edge Select */ +#define SSPA_SP_FSP (1 << 16) /* FSP Polarity Clock Edge Select */ +#define SSPA_SP_FFLUSH (1 << 2) /* FIFO Flush */ +#define SSPA_SP_S_RST (1 << 1) /* Active High Reset Signal */ +#define SSPA_SP_S_EN (1 << 0) /* Serial Clock Domain Enable */ +#define SSPA_SP_FWID_MASK (0x3f << 20) +#define SSPA_SP_FWID(x) ((x) << 20) /* Frame-Sync Width */ +#define SSPA_TXSP_FPER_MASK (0x3f << 4) +#define SSPA_TXSP_FPER(x) ((x) << 4) /* Frame-Sync Active */ + +/* sspa clock sources */ +#define MMP_SSPA_CLK_PLL 0 +#define MMP_SSPA_CLK_VCXO 1 +#define MMP_SSPA_CLK_AUDIO 3 + +/* sspa pll id */ +#define MMP_SYSCLK 0 +#define MMP_SSPA_CLK 1 + +#endif /* _MMP_SSPA_H */ |