1 files changed, 887 insertions, 0 deletions

diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
new file mode 100644
index 0000000000..b8a3cb8b75
--- /dev/null
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -0,0 +1,887 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * pxa-ssp.c  --  ALSA Soc Audio Layer
+ *
+ * Copyright 2005,2008 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ *         Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * TODO:
+ *  o Test network mode for > 16bit sample size
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pxa2xx_ssp.h>
+#include <linux/of.h>
+#include <linux/dmaengine.h>
+
+#include <asm/irq.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/pxa2xx-lib.h>
+#include <sound/dmaengine_pcm.h>
+
+#include "pxa-ssp.h"
+
+/*
+ * SSP audio private data
+ */
+struct ssp_priv {
+	struct ssp_device *ssp;
+	struct clk *extclk;
+	unsigned long ssp_clk;
+	unsigned int sysclk;
+	unsigned int dai_fmt;
+	unsigned int configured_dai_fmt;
+#ifdef CONFIG_PM
+	uint32_t	cr0;
+	uint32_t	cr1;
+	uint32_t	to;
+	uint32_t	psp;
+#endif
+};
+
+static void dump_registers(struct ssp_device *ssp)
+{
+	dev_dbg(ssp->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
+		 pxa_ssp_read_reg(ssp, SSCR0), pxa_ssp_read_reg(ssp, SSCR1),
+		 pxa_ssp_read_reg(ssp, SSTO));
+
+	dev_dbg(ssp->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n",
+		 pxa_ssp_read_reg(ssp, SSPSP), pxa_ssp_read_reg(ssp, SSSR),
+		 pxa_ssp_read_reg(ssp, SSACD));
+}
+
+static void pxa_ssp_set_dma_params(struct ssp_device *ssp, int width4,
+			int out, struct snd_dmaengine_dai_dma_data *dma)
+{
+	dma->addr_width = width4 ? DMA_SLAVE_BUSWIDTH_4_BYTES :
+				   DMA_SLAVE_BUSWIDTH_2_BYTES;
+	dma->maxburst = 16;
+	dma->addr = ssp->phys_base + SSDR;
+}
+
+static int pxa_ssp_startup(struct snd_pcm_substream *substream,
+			   struct snd_soc_dai *cpu_dai)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct ssp_device *ssp = priv->ssp;
+	struct snd_dmaengine_dai_dma_data *dma;
+	int ret = 0;
+
+	if (!snd_soc_dai_active(cpu_dai)) {
+		clk_prepare_enable(ssp->clk);
+		pxa_ssp_disable(ssp);
+	}
+
+	clk_prepare_enable(priv->extclk);
+
+	dma = kzalloc(sizeof(struct snd_dmaengine_dai_dma_data), GFP_KERNEL);
+	if (!dma)
+		return -ENOMEM;
+	dma->chan_name = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+		"tx" : "rx";
+
+	snd_soc_dai_set_dma_data(cpu_dai, substream, dma);
+
+	return ret;
+}
+
+static void pxa_ssp_shutdown(struct snd_pcm_substream *substream,
+			     struct snd_soc_dai *cpu_dai)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct ssp_device *ssp = priv->ssp;
+
+	if (!snd_soc_dai_active(cpu_dai)) {
+		pxa_ssp_disable(ssp);
+		clk_disable_unprepare(ssp->clk);
+	}
+
+	clk_disable_unprepare(priv->extclk);
+
+	kfree(snd_soc_dai_get_dma_data(cpu_dai, substream));
+	snd_soc_dai_set_dma_data(cpu_dai, substream, NULL);
+}
+
+#ifdef CONFIG_PM
+
+static int pxa_ssp_suspend(struct snd_soc_component *component)
+{
+	struct ssp_priv *priv = snd_soc_component_get_drvdata(component);
+	struct ssp_device *ssp = priv->ssp;
+
+	if (!snd_soc_component_active(component))
+		clk_prepare_enable(ssp->clk);
+
+	priv->cr0 = __raw_readl(ssp->mmio_base + SSCR0);
+	priv->cr1 = __raw_readl(ssp->mmio_base + SSCR1);
+	priv->to  = __raw_readl(ssp->mmio_base + SSTO);
+	priv->psp = __raw_readl(ssp->mmio_base + SSPSP);
+
+	pxa_ssp_disable(ssp);
+	clk_disable_unprepare(ssp->clk);
+	return 0;
+}
+
+static int pxa_ssp_resume(struct snd_soc_component *component)
+{
+	struct ssp_priv *priv = snd_soc_component_get_drvdata(component);
+	struct ssp_device *ssp = priv->ssp;
+	uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE;
+
+	clk_prepare_enable(ssp->clk);
+
+	__raw_writel(sssr, ssp->mmio_base + SSSR);
+	__raw_writel(priv->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0);
+	__raw_writel(priv->cr1, ssp->mmio_base + SSCR1);
+	__raw_writel(priv->to,  ssp->mmio_base + SSTO);
+	__raw_writel(priv->psp, ssp->mmio_base + SSPSP);
+
+	if (snd_soc_component_active(component))
+		pxa_ssp_enable(ssp);
+	else
+		clk_disable_unprepare(ssp->clk);
+
+	return 0;
+}
+
+#else
+#define pxa_ssp_suspend	NULL
+#define pxa_ssp_resume	NULL
+#endif
+
+/*
+ * ssp_set_clkdiv - set SSP clock divider
+ * @div: serial clock rate divider
+ */
+static void pxa_ssp_set_scr(struct ssp_device *ssp, u32 div)
+{
+	u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
+
+	if (ssp->type == PXA25x_SSP) {
+		sscr0 &= ~0x0000ff00;
+		sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
+	} else {
+		sscr0 &= ~0x000fff00;
+		sscr0 |= (div - 1) << 8;     /* 1..4096 */
+	}
+	pxa_ssp_write_reg(ssp, SSCR0, sscr0);
+}
+
+/*
+ * Set the SSP ports SYSCLK.
+ */
+static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+	int clk_id, unsigned int freq, int dir)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct ssp_device *ssp = priv->ssp;
+
+	u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0) &
+		~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
+
+	if (priv->extclk) {
+		int ret;
+
+		/*
+		 * For DT based boards, if an extclk is given, use it
+		 * here and configure PXA_SSP_CLK_EXT.
+		 */
+
+		ret = clk_set_rate(priv->extclk, freq);
+		if (ret < 0)
+			return ret;
+
+		clk_id = PXA_SSP_CLK_EXT;
+	}
+
+	dev_dbg(ssp->dev,
+		"pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n",
+		cpu_dai->id, clk_id, freq);
+
+	switch (clk_id) {
+	case PXA_SSP_CLK_NET_PLL:
+		sscr0 |= SSCR0_MOD;
+		break;
+	case PXA_SSP_CLK_PLL:
+		/* Internal PLL is fixed */
+		if (ssp->type == PXA25x_SSP)
+			priv->sysclk = 1843200;
+		else
+			priv->sysclk = 13000000;
+		break;
+	case PXA_SSP_CLK_EXT:
+		priv->sysclk = freq;
+		sscr0 |= SSCR0_ECS;
+		break;
+	case PXA_SSP_CLK_NET:
+		priv->sysclk = freq;
+		sscr0 |= SSCR0_NCS | SSCR0_MOD;
+		break;
+	case PXA_SSP_CLK_AUDIO:
+		priv->sysclk = 0;
+		pxa_ssp_set_scr(ssp, 1);
+		sscr0 |= SSCR0_ACS;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	/* The SSP clock must be disabled when changing SSP clock mode
+	 * on PXA2xx.  On PXA3xx it must be enabled when doing so. */
+	if (ssp->type != PXA3xx_SSP)
+		clk_disable_unprepare(ssp->clk);
+	pxa_ssp_write_reg(ssp, SSCR0, sscr0);
+	if (ssp->type != PXA3xx_SSP)
+		clk_prepare_enable(ssp->clk);
+
+	return 0;
+}
+
+/*
+ * Configure the PLL frequency pxa27x and (afaik - pxa320 only)
+ */
+static int pxa_ssp_set_pll(struct ssp_priv *priv, unsigned int freq)
+{
+	struct ssp_device *ssp = priv->ssp;
+	u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70;
+
+	if (ssp->type == PXA3xx_SSP)
+		pxa_ssp_write_reg(ssp, SSACDD, 0);
+
+	switch (freq) {
+	case 5622000:
+		break;
+	case 11345000:
+		ssacd |= (0x1 << 4);
+		break;
+	case 12235000:
+		ssacd |= (0x2 << 4);
+		break;
+	case 14857000:
+		ssacd |= (0x3 << 4);
+		break;
+	case 32842000:
+		ssacd |= (0x4 << 4);
+		break;
+	case 48000000:
+		ssacd |= (0x5 << 4);
+		break;
+	case 0:
+		/* Disable */
+		break;
+
+	default:
+		/* PXA3xx has a clock ditherer which can be used to generate
+		 * a wider range of frequencies - calculate a value for it.
+		 */
+		if (ssp->type == PXA3xx_SSP) {
+			u32 val;
+			u64 tmp = 19968;
+
+			tmp *= 1000000;
+			do_div(tmp, freq);
+			val = tmp;
+
+			val = (val << 16) | 64;
+			pxa_ssp_write_reg(ssp, SSACDD, val);
+
+			ssacd |= (0x6 << 4);
+
+			dev_dbg(ssp->dev,
+				"Using SSACDD %x to supply %uHz\n",
+				val, freq);
+			break;
+		}
+
+		return -EINVAL;
+	}
+
+	pxa_ssp_write_reg(ssp, SSACD, ssacd);
+
+	return 0;
+}
+
+/*
+ * Set the active slots in TDM/Network mode
+ */
+static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
+	unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct ssp_device *ssp = priv->ssp;
+	u32 sscr0;
+
+	sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
+	sscr0 &= ~(SSCR0_MOD | SSCR0_SlotsPerFrm(8) | SSCR0_EDSS | SSCR0_DSS);
+
+	/* set slot width */
+	if (slot_width > 16)
+		sscr0 |= SSCR0_EDSS | SSCR0_DataSize(slot_width - 16);
+	else
+		sscr0 |= SSCR0_DataSize(slot_width);
+
+	if (slots > 1) {
+		/* enable network mode */
+		sscr0 |= SSCR0_MOD;
+
+		/* set number of active slots */
+		sscr0 |= SSCR0_SlotsPerFrm(slots);
+
+		/* set active slot mask */
+		pxa_ssp_write_reg(ssp, SSTSA, tx_mask);
+		pxa_ssp_write_reg(ssp, SSRSA, rx_mask);
+	}
+	pxa_ssp_write_reg(ssp, SSCR0, sscr0);
+
+	return 0;
+}
+
+/*
+ * Tristate the SSP DAI lines
+ */
+static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai,
+	int tristate)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct ssp_device *ssp = priv->ssp;
+	u32 sscr1;
+
+	sscr1 = pxa_ssp_read_reg(ssp, SSCR1);
+	if (tristate)
+		sscr1 &= ~SSCR1_TTE;
+	else
+		sscr1 |= SSCR1_TTE;
+	pxa_ssp_write_reg(ssp, SSCR1, sscr1);
+
+	return 0;
+}
+
+static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+			       unsigned int fmt)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+
+	switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+	case SND_SOC_DAIFMT_BC_FC:
+	case SND_SOC_DAIFMT_BC_FP:
+	case SND_SOC_DAIFMT_BP_FP:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+	case SND_SOC_DAIFMT_NB_IF:
+	case SND_SOC_DAIFMT_IB_IF:
+	case SND_SOC_DAIFMT_IB_NF:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	/* Settings will be applied in hw_params() */
+	priv->dai_fmt = fmt;
+
+	return 0;
+}
+
+/*
+ * Set up the SSP DAI format.
+ * The SSP Port must be inactive before calling this function as the
+ * physical interface format is changed.
+ */
+static int pxa_ssp_configure_dai_fmt(struct ssp_priv *priv)
+{
+	struct ssp_device *ssp = priv->ssp;
+	u32 sscr0, sscr1, sspsp, scfr;
+
+	/* check if we need to change anything at all */
+	if (priv->configured_dai_fmt == priv->dai_fmt)
+		return 0;
+
+	/* reset port settings */
+	sscr0 = pxa_ssp_read_reg(ssp, SSCR0) &
+		~(SSCR0_PSP | SSCR0_MOD);
+	sscr1 = pxa_ssp_read_reg(ssp, SSCR1) &
+		~(SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR |
+		  SSCR1_RWOT | SSCR1_TRAIL | SSCR1_TFT | SSCR1_RFT);
+	sspsp = pxa_ssp_read_reg(ssp, SSPSP) &
+		~(SSPSP_SFRMP | SSPSP_SCMODE(3));
+
+	sscr1 |= SSCR1_RxTresh(8) | SSCR1_TxTresh(7);
+
+	switch (priv->dai_fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+	case SND_SOC_DAIFMT_BC_FC:
+		sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR;
+		break;
+	case SND_SOC_DAIFMT_BC_FP:
+		sscr1 |= SSCR1_SCLKDIR | SSCR1_SCFR;
+		break;
+	case SND_SOC_DAIFMT_BP_FP:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (priv->dai_fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		sspsp |= SSPSP_SFRMP;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		sspsp |= SSPSP_SCMODE(2);
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		sscr0 |= SSCR0_PSP;
+		sscr1 |= SSCR1_RWOT | SSCR1_TRAIL;
+		/* See hw_params() */
+		break;
+
+	case SND_SOC_DAIFMT_DSP_A:
+		sspsp |= SSPSP_FSRT;
+		fallthrough;
+	case SND_SOC_DAIFMT_DSP_B:
+		sscr0 |= SSCR0_MOD | SSCR0_PSP;
+		sscr1 |= SSCR1_TRAIL | SSCR1_RWOT;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	pxa_ssp_write_reg(ssp, SSCR0, sscr0);
+	pxa_ssp_write_reg(ssp, SSCR1, sscr1);
+	pxa_ssp_write_reg(ssp, SSPSP, sspsp);
+
+	switch (priv->dai_fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+	case SND_SOC_DAIFMT_BC_FC:
+	case SND_SOC_DAIFMT_BC_FP:
+		scfr = pxa_ssp_read_reg(ssp, SSCR1) | SSCR1_SCFR;
+		pxa_ssp_write_reg(ssp, SSCR1, scfr);
+
+		while (pxa_ssp_read_reg(ssp, SSSR) & SSSR_BSY)
+			cpu_relax();
+		break;
+	}
+
+	dump_registers(ssp);
+
+	/* Since we are configuring the timings for the format by hand
+	 * we have to defer some things until hw_params() where we
+	 * know parameters like the sample size.
+	 */
+	priv->configured_dai_fmt = priv->dai_fmt;
+
+	return 0;
+}
+
+struct pxa_ssp_clock_mode {
+	int rate;
+	int pll;
+	u8 acds;
+	u8 scdb;
+};
+
+static const struct pxa_ssp_clock_mode pxa_ssp_clock_modes[] = {
+	{ .rate =  8000, .pll = 32842000, .acds = SSACD_ACDS_32, .scdb = SSACD_SCDB_4X },
+	{ .rate = 11025, .pll =  5622000, .acds = SSACD_ACDS_4,  .scdb = SSACD_SCDB_4X },
+	{ .rate = 16000, .pll = 32842000, .acds = SSACD_ACDS_16, .scdb = SSACD_SCDB_4X },
+	{ .rate = 22050, .pll =  5622000, .acds = SSACD_ACDS_2,  .scdb = SSACD_SCDB_4X },
+	{ .rate = 44100, .pll = 11345000, .acds = SSACD_ACDS_2,  .scdb = SSACD_SCDB_4X },
+	{ .rate = 48000, .pll = 12235000, .acds = SSACD_ACDS_2,  .scdb = SSACD_SCDB_4X },
+	{ .rate = 96000, .pll = 12235000, .acds = SSACD_ACDS_4,  .scdb = SSACD_SCDB_1X },
+	{}
+};
+
+/*
+ * Set the SSP audio DMA parameters and sample size.
+ * Can be called multiple times by oss emulation.
+ */
+static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *cpu_dai)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct ssp_device *ssp = priv->ssp;
+	int chn = params_channels(params);
+	u32 sscr0, sspsp;
+	int width = snd_pcm_format_physical_width(params_format(params));
+	int ttsa = pxa_ssp_read_reg(ssp, SSTSA) & 0xf;
+	struct snd_dmaengine_dai_dma_data *dma_data;
+	int rate = params_rate(params);
+	int bclk = rate * chn * (width / 8);
+	int ret;
+
+	dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream);
+
+	/* Network mode with one active slot (ttsa == 1) can be used
+	 * to force 16-bit frame width on the wire (for S16_LE), even
+	 * with two channels. Use 16-bit DMA transfers for this case.
+	 */
+	pxa_ssp_set_dma_params(ssp,
+		((chn == 2) && (ttsa != 1)) || (width == 32),
+		substream->stream == SNDRV_PCM_STREAM_PLAYBACK, dma_data);
+
+	/* we can only change the settings if the port is not in use */
+	if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
+		return 0;
+
+	ret = pxa_ssp_configure_dai_fmt(priv);
+	if (ret < 0)
+		return ret;
+
+	/* clear selected SSP bits */
+	sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS);
+
+	/* bit size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		if (ssp->type == PXA3xx_SSP)
+			sscr0 |= SSCR0_FPCKE;
+		sscr0 |= SSCR0_DataSize(16);
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8));
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16));
+		break;
+	}
+	pxa_ssp_write_reg(ssp, SSCR0, sscr0);
+
+	if (sscr0 & SSCR0_ACS) {
+		ret = pxa_ssp_set_pll(priv, bclk);
+
+		/*
+		 * If we were able to generate the bclk directly,
+		 * all is fine. Otherwise, look up the closest rate
+		 * from the table and also set the dividers.
+		 */
+
+		if (ret < 0) {
+			const struct pxa_ssp_clock_mode *m;
+			int ssacd;
+
+			for (m = pxa_ssp_clock_modes; m->rate; m++) {
+				if (m->rate == rate)
+					break;
+			}
+
+			if (!m->rate)
+				return -EINVAL;
+
+			ret = pxa_ssp_set_pll(priv, bclk);
+			if (ret < 0)
+				return ret;
+
+			ssacd = pxa_ssp_read_reg(ssp, SSACD);
+			ssacd &= ~(SSACD_ACDS(7) | SSACD_SCDB_1X);
+			ssacd |= SSACD_ACDS(m->acds);
+			ssacd |= m->scdb;
+			pxa_ssp_write_reg(ssp, SSACD, ssacd);
+		}
+	} else if (sscr0 & SSCR0_ECS) {
+		/*
+		 * For setups with external clocking, the PLL and its diviers
+		 * are not active. Instead, the SCR bits in SSCR0 can be used
+		 * to divide the clock.
+		 */
+		pxa_ssp_set_scr(ssp, bclk / rate);
+	}
+
+	switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+	       sspsp = pxa_ssp_read_reg(ssp, SSPSP);
+
+		if (((priv->sysclk / bclk) == 64) && (width == 16)) {
+			/* This is a special case where the bitclk is 64fs
+			 * and we're not dealing with 2*32 bits of audio
+			 * samples.
+			 *
+			 * The SSP values used for that are all found out by
+			 * trying and failing a lot; some of the registers
+			 * needed for that mode are only available on PXA3xx.
+			 */
+			if (ssp->type != PXA3xx_SSP)
+				return -EINVAL;
+
+			sspsp |= SSPSP_SFRMWDTH(width * 2);
+			sspsp |= SSPSP_SFRMDLY(width * 4);
+			sspsp |= SSPSP_EDMYSTOP(3);
+			sspsp |= SSPSP_DMYSTOP(3);
+			sspsp |= SSPSP_DMYSTRT(1);
+		} else {
+			/* The frame width is the width the LRCLK is
+			 * asserted for; the delay is expressed in
+			 * half cycle units.  We need the extra cycle
+			 * because the data starts clocking out one BCLK
+			 * after LRCLK changes polarity.
+			 */
+			sspsp |= SSPSP_SFRMWDTH(width + 1);
+			sspsp |= SSPSP_SFRMDLY((width + 1) * 2);
+			sspsp |= SSPSP_DMYSTRT(1);
+		}
+
+		pxa_ssp_write_reg(ssp, SSPSP, sspsp);
+		break;
+	default:
+		break;
+	}
+
+	/* When we use a network mode, we always require TDM slots
+	 * - complain loudly and fail if they've not been set up yet.
+	 */
+	if ((sscr0 & SSCR0_MOD) && !ttsa) {
+		dev_err(ssp->dev, "No TDM timeslot configured\n");
+		return -EINVAL;
+	}
+
+	dump_registers(ssp);
+
+	return 0;
+}
+
+static void pxa_ssp_set_running_bit(struct snd_pcm_substream *substream,
+				    struct ssp_device *ssp, int value)
+{
+	uint32_t sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
+	uint32_t sscr1 = pxa_ssp_read_reg(ssp, SSCR1);
+	uint32_t sspsp = pxa_ssp_read_reg(ssp, SSPSP);
+	uint32_t sssr = pxa_ssp_read_reg(ssp, SSSR);
+
+	if (value && (sscr0 & SSCR0_SSE))
+		pxa_ssp_write_reg(ssp, SSCR0, sscr0 & ~SSCR0_SSE);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		if (value)
+			sscr1 |= SSCR1_TSRE;
+		else
+			sscr1 &= ~SSCR1_TSRE;
+	} else {
+		if (value)
+			sscr1 |= SSCR1_RSRE;
+		else
+			sscr1 &= ~SSCR1_RSRE;
+	}
+
+	pxa_ssp_write_reg(ssp, SSCR1, sscr1);
+
+	if (value) {
+		pxa_ssp_write_reg(ssp, SSSR, sssr);
+		pxa_ssp_write_reg(ssp, SSPSP, sspsp);
+		pxa_ssp_write_reg(ssp, SSCR0, sscr0 | SSCR0_SSE);
+	}
+}
+
+static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd,
+			   struct snd_soc_dai *cpu_dai)
+{
+	int ret = 0;
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct ssp_device *ssp = priv->ssp;
+	int val;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_RESUME:
+		pxa_ssp_enable(ssp);
+		break;
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		pxa_ssp_set_running_bit(substream, ssp, 1);
+		val = pxa_ssp_read_reg(ssp, SSSR);
+		pxa_ssp_write_reg(ssp, SSSR, val);
+		break;
+	case SNDRV_PCM_TRIGGER_START:
+		pxa_ssp_set_running_bit(substream, ssp, 1);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		pxa_ssp_set_running_bit(substream, ssp, 0);
+		break;
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		pxa_ssp_disable(ssp);
+		break;
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		pxa_ssp_set_running_bit(substream, ssp, 0);
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	dump_registers(ssp);
+
+	return ret;
+}
+
+static int pxa_ssp_probe(struct snd_soc_dai *dai)
+{
+	struct device *dev = dai->dev;
+	struct ssp_priv *priv;
+	int ret;
+
+	priv = kzalloc(sizeof(struct ssp_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	if (dev->of_node) {
+		struct device_node *ssp_handle;
+
+		ssp_handle = of_parse_phandle(dev->of_node, "port", 0);
+		if (!ssp_handle) {
+			dev_err(dev, "unable to get 'port' phandle\n");
+			ret = -ENODEV;
+			goto err_priv;
+		}
+
+		priv->ssp = pxa_ssp_request_of(ssp_handle, "SoC audio");
+		if (priv->ssp == NULL) {
+			ret = -ENODEV;
+			goto err_priv;
+		}
+
+		priv->extclk = devm_clk_get(dev, "extclk");
+		if (IS_ERR(priv->extclk)) {
+			ret = PTR_ERR(priv->extclk);
+			if (ret == -EPROBE_DEFER)
+				goto err_priv;
+
+			priv->extclk = NULL;
+		}
+	} else {
+		priv->ssp = pxa_ssp_request(dai->id + 1, "SoC audio");
+		if (priv->ssp == NULL) {
+			ret = -ENODEV;
+			goto err_priv;
+		}
+	}
+
+	priv->dai_fmt = (unsigned int) -1;
+	snd_soc_dai_set_drvdata(dai, priv);
+
+	return 0;
+
+err_priv:
+	kfree(priv);
+	return ret;
+}
+
+static int pxa_ssp_remove(struct snd_soc_dai *dai)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(dai);
+
+	pxa_ssp_free(priv->ssp);
+	kfree(priv);
+	return 0;
+}
+
+#define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+			  SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |	\
+			  SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |	\
+			  SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 |	\
+			  SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+#define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static const struct snd_soc_dai_ops pxa_ssp_dai_ops = {
+	.probe		= pxa_ssp_probe,
+	.remove		= pxa_ssp_remove,
+	.startup	= pxa_ssp_startup,
+	.shutdown	= pxa_ssp_shutdown,
+	.trigger	= pxa_ssp_trigger,
+	.hw_params	= pxa_ssp_hw_params,
+	.set_sysclk	= pxa_ssp_set_dai_sysclk,
+	.set_fmt	= pxa_ssp_set_dai_fmt,
+	.set_tdm_slot	= pxa_ssp_set_dai_tdm_slot,
+	.set_tristate	= pxa_ssp_set_dai_tristate,
+};
+
+static struct snd_soc_dai_driver pxa_ssp_dai = {
+		.playback = {
+			.channels_min = 1,
+			.channels_max = 8,
+			.rates = PXA_SSP_RATES,
+			.formats = PXA_SSP_FORMATS,
+		},
+		.capture = {
+			 .channels_min = 1,
+			 .channels_max = 8,
+			.rates = PXA_SSP_RATES,
+			.formats = PXA_SSP_FORMATS,
+		 },
+		.ops = &pxa_ssp_dai_ops,
+};
+
+static const struct snd_soc_component_driver pxa_ssp_component = {
+	.name			= "pxa-ssp",
+	.pcm_construct		= pxa2xx_soc_pcm_new,
+	.open			= pxa2xx_soc_pcm_open,
+	.close			= pxa2xx_soc_pcm_close,
+	.hw_params		= pxa2xx_soc_pcm_hw_params,
+	.prepare		= pxa2xx_soc_pcm_prepare,
+	.trigger		= pxa2xx_soc_pcm_trigger,
+	.pointer		= pxa2xx_soc_pcm_pointer,
+	.suspend		= pxa_ssp_suspend,
+	.resume			= pxa_ssp_resume,
+	.legacy_dai_naming	= 1,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_ssp_of_ids[] = {
+	{ .compatible = "mrvl,pxa-ssp-dai" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids);
+#endif
+
+static int asoc_ssp_probe(struct platform_device *pdev)
+{
+	return devm_snd_soc_register_component(&pdev->dev, &pxa_ssp_component,
+					       &pxa_ssp_dai, 1);
+}
+
+static struct platform_driver asoc_ssp_driver = {
+	.driver = {
+		.name = "pxa-ssp-dai",
+		.of_match_table = of_match_ptr(pxa_ssp_of_ids),
+	},
+
+	.probe = asoc_ssp_probe,
+};
+
+module_platform_driver(asoc_ssp_driver);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("PXA SSP/PCM SoC Interface");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa-ssp-dai");