1 files changed, 105 insertions, 0 deletions
diff --git a/sound/soc/sof/intel/hda-bus.c b/sound/soc/sof/intel/hda-bus.c
new file mode 100644
index 000000000..fc63085d2
--- /dev/null
+++ b/sound/soc/sof/intel/hda-bus.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+//
+// This file is provided under a dual BSD/GPLv2 license.  When using or
+// redistributing this file, you may do so under either license.
+//
+// Copyright(c) 2018 Intel Corporation. All rights reserved.
+//
+// Authors: Keyon Jie <yang.jie@linux.intel.com>
+
+#include <linux/io.h>
+#include <sound/hdaudio.h>
+#include <sound/hda_i915.h>
+#include <sound/hda_codec.h>
+#include <sound/hda_register.h>
+#include "../sof-priv.h"
+#include "hda.h"
+
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC)
+#include "../../codecs/hdac_hda.h"
+#define sof_hda_ext_ops	snd_soc_hdac_hda_get_ops()
+
+static void update_codec_wake_enable(struct hdac_bus *bus, unsigned int addr, bool link_power)
+{
+	unsigned int mask = snd_hdac_chip_readw(bus, WAKEEN);
+
+	if (link_power)
+		mask &= ~BIT(addr);
+	else
+		mask |= BIT(addr);
+
+	snd_hdac_chip_updatew(bus, WAKEEN, STATESTS_INT_MASK, mask);
+}
+
+static void sof_hda_bus_link_power(struct hdac_device *codec, bool enable)
+{
+	struct hdac_bus *bus = codec->bus;
+	bool oldstate = test_bit(codec->addr, &bus->codec_powered);
+
+	snd_hdac_ext_bus_link_power(codec, enable);
+
+	if (enable == oldstate)
+		return;
+
+	/*
+	 * Both codec driver and controller can hold references to
+	 * display power. To avoid unnecessary power-up/down cycles,
+	 * controller doesn't immediately release its reference.
+	 *
+	 * If the codec driver powers down the link, release
+	 * the controller reference as well.
+	 */
+	if (codec->addr == HDA_IDISP_ADDR && !enable)
+		snd_hdac_display_power(bus, HDA_CODEC_IDX_CONTROLLER, false);
+
+	/* WAKEEN needs to be set for disabled links */
+	update_codec_wake_enable(bus, codec->addr, enable);
+}
+
+static const struct hdac_bus_ops bus_core_ops = {
+	.command = snd_hdac_bus_send_cmd,
+	.get_response = snd_hdac_bus_get_response,
+	.link_power = sof_hda_bus_link_power,
+};
+#endif
+
+/*
+ * This can be used for both with/without hda link support.
+ */
+void sof_hda_bus_init(struct snd_sof_dev *sdev, struct device *dev)
+{
+	struct hdac_bus *bus = sof_to_bus(sdev);
+
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_LINK)
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC)
+	snd_hdac_ext_bus_init(bus, dev, &bus_core_ops, sof_hda_ext_ops);
+#else
+	snd_hdac_ext_bus_init(bus, dev, NULL, NULL);
+#endif
+#else
+
+	memset(bus, 0, sizeof(*bus));
+	bus->dev = dev;
+
+	INIT_LIST_HEAD(&bus->stream_list);
+
+	bus->irq = -1;
+
+	/*
+	 * There is only one HDA bus atm. keep the index as 0.
+	 * Need to fix when there are more than one HDA bus.
+	 */
+	bus->idx = 0;
+
+	spin_lock_init(&bus->reg_lock);
+#endif /* CONFIG_SND_SOC_SOF_HDA_LINK */
+}
+
+void sof_hda_bus_exit(struct snd_sof_dev *sdev)
+{
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_LINK)
+	struct hdac_bus *bus = sof_to_bus(sdev);
+
+	snd_hdac_ext_bus_exit(bus);
+#endif
+}