diff options
Diffstat (limited to '')
-rw-r--r-- | sound/soc/sof/intel/hda-loader-skl.c | 578 |
1 files changed, 578 insertions, 0 deletions
diff --git a/sound/soc/sof/intel/hda-loader-skl.c b/sound/soc/sof/intel/hda-loader-skl.c new file mode 100644 index 0000000000..1e77ca936f --- /dev/null +++ b/sound/soc/sof/intel/hda-loader-skl.c @@ -0,0 +1,578 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) +// +// This file is provided under a dual BSD/GPLv2 license. When using or +// redistributing this file, you may do so under either license. +// +// Copyright(c) 2018-2022 Intel Corporation. All rights reserved. +// + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/firmware.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <sound/hdaudio_ext.h> +#include <sound/sof.h> +#include <sound/pcm_params.h> + +#include "../sof-priv.h" +#include "../ops.h" +#include "hda.h" + +#define HDA_SKL_WAIT_TIMEOUT 500 /* 500 msec */ +#define HDA_SKL_CLDMA_MAX_BUFFER_SIZE (32 * PAGE_SIZE) + +/* Stream Reset */ +#define HDA_CL_SD_CTL_SRST_SHIFT 0 +#define HDA_CL_SD_CTL_SRST(x) (((x) & 0x1) << \ + HDA_CL_SD_CTL_SRST_SHIFT) + +/* Stream Run */ +#define HDA_CL_SD_CTL_RUN_SHIFT 1 +#define HDA_CL_SD_CTL_RUN(x) (((x) & 0x1) << \ + HDA_CL_SD_CTL_RUN_SHIFT) + +/* Interrupt On Completion Enable */ +#define HDA_CL_SD_CTL_IOCE_SHIFT 2 +#define HDA_CL_SD_CTL_IOCE(x) (((x) & 0x1) << \ + HDA_CL_SD_CTL_IOCE_SHIFT) + +/* FIFO Error Interrupt Enable */ +#define HDA_CL_SD_CTL_FEIE_SHIFT 3 +#define HDA_CL_SD_CTL_FEIE(x) (((x) & 0x1) << \ + HDA_CL_SD_CTL_FEIE_SHIFT) + +/* Descriptor Error Interrupt Enable */ +#define HDA_CL_SD_CTL_DEIE_SHIFT 4 +#define HDA_CL_SD_CTL_DEIE(x) (((x) & 0x1) << \ + HDA_CL_SD_CTL_DEIE_SHIFT) + +/* FIFO Limit Change */ +#define HDA_CL_SD_CTL_FIFOLC_SHIFT 5 +#define HDA_CL_SD_CTL_FIFOLC(x) (((x) & 0x1) << \ + HDA_CL_SD_CTL_FIFOLC_SHIFT) + +/* Stripe Control */ +#define HDA_CL_SD_CTL_STRIPE_SHIFT 16 +#define HDA_CL_SD_CTL_STRIPE(x) (((x) & 0x3) << \ + HDA_CL_SD_CTL_STRIPE_SHIFT) + +/* Traffic Priority */ +#define HDA_CL_SD_CTL_TP_SHIFT 18 +#define HDA_CL_SD_CTL_TP(x) (((x) & 0x1) << \ + HDA_CL_SD_CTL_TP_SHIFT) + +/* Bidirectional Direction Control */ +#define HDA_CL_SD_CTL_DIR_SHIFT 19 +#define HDA_CL_SD_CTL_DIR(x) (((x) & 0x1) << \ + HDA_CL_SD_CTL_DIR_SHIFT) + +/* Stream Number */ +#define HDA_CL_SD_CTL_STRM_SHIFT 20 +#define HDA_CL_SD_CTL_STRM(x) (((x) & 0xf) << \ + HDA_CL_SD_CTL_STRM_SHIFT) + +#define HDA_CL_SD_CTL_INT(x) \ + (HDA_CL_SD_CTL_IOCE(x) | \ + HDA_CL_SD_CTL_FEIE(x) | \ + HDA_CL_SD_CTL_DEIE(x)) + +#define HDA_CL_SD_CTL_INT_MASK \ + (HDA_CL_SD_CTL_IOCE(1) | \ + HDA_CL_SD_CTL_FEIE(1) | \ + HDA_CL_SD_CTL_DEIE(1)) + +#define DMA_ADDRESS_128_BITS_ALIGNMENT 7 +#define BDL_ALIGN(x) ((x) >> DMA_ADDRESS_128_BITS_ALIGNMENT) + +/* Buffer Descriptor List Lower Base Address */ +#define HDA_CL_SD_BDLPLBA_SHIFT 7 +#define HDA_CL_SD_BDLPLBA_MASK GENMASK(31, 7) +#define HDA_CL_SD_BDLPLBA(x) \ + ((BDL_ALIGN(lower_32_bits(x)) << HDA_CL_SD_BDLPLBA_SHIFT) & \ + HDA_CL_SD_BDLPLBA_MASK) + +/* Buffer Descriptor List Upper Base Address */ +#define HDA_CL_SD_BDLPUBA(x) \ + (upper_32_bits(x)) + +/* Software Position in Buffer Enable */ +#define HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_SHIFT 0 +#define HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK \ + (1 << HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_SHIFT) + +#define HDA_CL_SPBFIFO_SPBFCCTL_SPIBE(x) \ + (((x) << HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_SHIFT) & \ + HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK) + +#define HDA_CL_DMA_SD_INT_COMPLETE 0x4 + +static int cl_skl_cldma_setup_bdle(struct snd_sof_dev *sdev, + struct snd_dma_buffer *dmab_data, + __le32 **bdlp, int size, int with_ioc) +{ + phys_addr_t addr = virt_to_phys(dmab_data->area); + __le32 *bdl = *bdlp; + + /* + * This code is simplified by using one fragment of physical memory and assuming + * all the code fits. This could be improved with scatter-gather but the firmware + * size is limited by DSP memory anyways + */ + bdl[0] = cpu_to_le32(lower_32_bits(addr)); + bdl[1] = cpu_to_le32(upper_32_bits(addr)); + bdl[2] = cpu_to_le32(size); + bdl[3] = (!with_ioc) ? 0 : cpu_to_le32(0x01); + + return 1; /* one fragment */ +} + +static void cl_skl_cldma_stream_run(struct snd_sof_dev *sdev, bool enable) +{ + int sd_offset = SOF_HDA_ADSP_LOADER_BASE; + unsigned char val; + int retries; + u32 run = enable ? 0x1 : 0; + + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_SD_CTL, + HDA_CL_SD_CTL_RUN(1), HDA_CL_SD_CTL_RUN(run)); + + retries = 300; + do { + udelay(3); + + /* waiting for hardware to report the stream Run bit set */ + val = snd_sof_dsp_read(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_SD_CTL); + val &= HDA_CL_SD_CTL_RUN(1); + if (enable && val) + break; + else if (!enable && !val) + break; + } while (--retries); + + if (retries == 0) + dev_err(sdev->dev, "%s: failed to set Run bit=%d enable=%d\n", + __func__, val, enable); +} + +static void cl_skl_cldma_stream_clear(struct snd_sof_dev *sdev) +{ + int sd_offset = SOF_HDA_ADSP_LOADER_BASE; + + /* make sure Run bit is cleared before setting stream register */ + cl_skl_cldma_stream_run(sdev, 0); + + /* Disable the Interrupt On Completion, FIFO Error Interrupt, + * Descriptor Error Interrupt and set the cldma stream number to 0. + */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_SD_CTL, + HDA_CL_SD_CTL_INT_MASK, HDA_CL_SD_CTL_INT(0)); + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_SD_CTL, + HDA_CL_SD_CTL_STRM(0xf), HDA_CL_SD_CTL_STRM(0)); + + snd_sof_dsp_write(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_SD_BDLPL, HDA_CL_SD_BDLPLBA(0)); + snd_sof_dsp_write(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_SD_BDLPU, 0); + + /* Set the Cyclic Buffer Length to 0. */ + snd_sof_dsp_write(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_SD_CBL, 0); + /* Set the Last Valid Index. */ + snd_sof_dsp_write(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_SD_LVI, 0); +} + +static void cl_skl_cldma_setup_spb(struct snd_sof_dev *sdev, + unsigned int size, bool enable) +{ + int sd_offset = SOF_DSP_REG_CL_SPBFIFO; + + if (enable) + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_CL_SPBFIFO_SPBFCCTL, + HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK, + HDA_CL_SPBFIFO_SPBFCCTL_SPIBE(1)); + + snd_sof_dsp_write(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_CL_SPBFIFO_SPIB, size); +} + +static void cl_skl_cldma_set_intr(struct snd_sof_dev *sdev, bool enable) +{ + u32 val = enable ? HDA_DSP_ADSPIC_CL_DMA : 0; + + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC, + HDA_DSP_ADSPIC_CL_DMA, val); +} + +static void cl_skl_cldma_cleanup_spb(struct snd_sof_dev *sdev) +{ + int sd_offset = SOF_DSP_REG_CL_SPBFIFO; + + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_CL_SPBFIFO_SPBFCCTL, + HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK, + HDA_CL_SPBFIFO_SPBFCCTL_SPIBE(0)); + + snd_sof_dsp_write(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_CL_SPBFIFO_SPIB, 0); +} + +static void cl_skl_cldma_setup_controller(struct snd_sof_dev *sdev, + struct snd_dma_buffer *dmab_bdl, + unsigned int max_size, u32 count) +{ + int sd_offset = SOF_HDA_ADSP_LOADER_BASE; + + /* Clear the stream first and then set it. */ + cl_skl_cldma_stream_clear(sdev); + + /* setting the stream register */ + snd_sof_dsp_write(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_SD_BDLPL, + HDA_CL_SD_BDLPLBA(dmab_bdl->addr)); + snd_sof_dsp_write(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_SD_BDLPU, + HDA_CL_SD_BDLPUBA(dmab_bdl->addr)); + + /* Set the Cyclic Buffer Length. */ + snd_sof_dsp_write(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_SD_CBL, max_size); + /* Set the Last Valid Index. */ + snd_sof_dsp_write(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_SD_LVI, count - 1); + + /* Set the Interrupt On Completion, FIFO Error Interrupt, + * Descriptor Error Interrupt and the cldma stream number. + */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_SD_CTL, + HDA_CL_SD_CTL_INT_MASK, HDA_CL_SD_CTL_INT(1)); + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_SD_CTL, + HDA_CL_SD_CTL_STRM(0xf), + HDA_CL_SD_CTL_STRM(1)); +} + +static int cl_stream_prepare_skl(struct snd_sof_dev *sdev, + struct snd_dma_buffer *dmab, + struct snd_dma_buffer *dmab_bdl) + +{ + unsigned int bufsize = HDA_SKL_CLDMA_MAX_BUFFER_SIZE; + __le32 *bdl; + int frags; + int ret; + + ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, sdev->dev, bufsize, dmab); + if (ret < 0) { + dev_err(sdev->dev, "%s: failed to alloc fw buffer: %x\n", __func__, ret); + return ret; + } + + ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, sdev->dev, bufsize, dmab_bdl); + if (ret < 0) { + dev_err(sdev->dev, "%s: failed to alloc blde: %x\n", __func__, ret); + snd_dma_free_pages(dmab); + return ret; + } + + bdl = (__le32 *)dmab_bdl->area; + frags = cl_skl_cldma_setup_bdle(sdev, dmab, &bdl, bufsize, 1); + cl_skl_cldma_setup_controller(sdev, dmab_bdl, bufsize, frags); + + return ret; +} + +static void cl_cleanup_skl(struct snd_sof_dev *sdev, + struct snd_dma_buffer *dmab, + struct snd_dma_buffer *dmab_bdl) +{ + cl_skl_cldma_cleanup_spb(sdev); + cl_skl_cldma_stream_clear(sdev); + snd_dma_free_pages(dmab); + snd_dma_free_pages(dmab_bdl); +} + +static int cl_dsp_init_skl(struct snd_sof_dev *sdev, + struct snd_dma_buffer *dmab, + struct snd_dma_buffer *dmab_bdl) +{ + struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; + const struct sof_intel_dsp_desc *chip = hda->desc; + unsigned int status; + u32 flags; + int ret; + + /* check if the init_core is already enabled, if yes, reset and make it run, + * if not, powerdown and enable it again. + */ + if (hda_dsp_core_is_enabled(sdev, chip->init_core_mask)) { + /* if enabled, reset it, and run the init_core. */ + ret = hda_dsp_core_stall_reset(sdev, chip->init_core_mask); + if (ret < 0) + goto err; + + ret = hda_dsp_core_run(sdev, chip->init_core_mask); + if (ret < 0) { + dev_err(sdev->dev, "%s: dsp core start failed %d\n", __func__, ret); + goto err; + } + } else { + /* if not enabled, power down it first and then powerup and run + * the init_core. + */ + ret = hda_dsp_core_reset_power_down(sdev, chip->init_core_mask); + if (ret < 0) { + dev_err(sdev->dev, "%s: dsp core0 disable fail: %d\n", __func__, ret); + goto err; + } + ret = hda_dsp_enable_core(sdev, chip->init_core_mask); + if (ret < 0) { + dev_err(sdev->dev, "%s: dsp core0 enable fail: %d\n", __func__, ret); + goto err; + } + } + + /* prepare DMA for code loader stream */ + ret = cl_stream_prepare_skl(sdev, dmab, dmab_bdl); + if (ret < 0) { + dev_err(sdev->dev, "%s: dma prepare fw loading err: %x\n", __func__, ret); + return ret; + } + + /* enable the interrupt */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC, + HDA_DSP_ADSPIC_IPC, HDA_DSP_ADSPIC_IPC); + + /* enable IPC DONE interrupt */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl, + HDA_DSP_REG_HIPCCTL_DONE, + HDA_DSP_REG_HIPCCTL_DONE); + + /* enable IPC BUSY interrupt */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl, + HDA_DSP_REG_HIPCCTL_BUSY, + HDA_DSP_REG_HIPCCTL_BUSY); + + /* polling the ROM init status information. */ + ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, + chip->rom_status_reg, status, + (FSR_TO_STATE_CODE(status) + == FSR_STATE_INIT_DONE), + HDA_DSP_REG_POLL_INTERVAL_US, + chip->rom_init_timeout * + USEC_PER_MSEC); + if (ret < 0) + goto err; + + return ret; + +err: + flags = SOF_DBG_DUMP_PCI | SOF_DBG_DUMP_MBOX; + + snd_sof_dsp_dbg_dump(sdev, "Boot failed\n", flags); + cl_cleanup_skl(sdev, dmab, dmab_bdl); + hda_dsp_core_reset_power_down(sdev, chip->init_core_mask); + return ret; +} + +static void cl_skl_cldma_fill_buffer(struct snd_sof_dev *sdev, + struct snd_dma_buffer *dmab, + unsigned int bufsize, + unsigned int copysize, + const void *curr_pos, + bool intr_enable) +{ + struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; + + /* copy the image into the buffer with the maximum buffer size. */ + unsigned int size = (bufsize == copysize) ? bufsize : copysize; + + memcpy(dmab->area, curr_pos, size); + + /* Set the wait condition for every load. */ + hda->code_loading = 1; + + /* Set the interrupt. */ + if (intr_enable) + cl_skl_cldma_set_intr(sdev, true); + + /* Set the SPB. */ + cl_skl_cldma_setup_spb(sdev, size, true); + + /* Trigger the code loading stream. */ + cl_skl_cldma_stream_run(sdev, true); +} + +static int cl_skl_cldma_wait_interruptible(struct snd_sof_dev *sdev, + bool intr_wait) +{ + struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; + const struct sof_intel_dsp_desc *chip = hda->desc; + int sd_offset = SOF_HDA_ADSP_LOADER_BASE; + u8 cl_dma_intr_status; + + /* + * Wait for CLDMA interrupt to inform the binary segment transfer is + * complete. + */ + if (!wait_event_timeout(hda->waitq, !hda->code_loading, + msecs_to_jiffies(HDA_SKL_WAIT_TIMEOUT))) { + dev_err(sdev->dev, "cldma copy timeout\n"); + dev_err(sdev->dev, "ROM code=%#x: FW status=%#x\n", + snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_SRAM_REG_ROM_ERROR), + snd_sof_dsp_read(sdev, HDA_DSP_BAR, chip->rom_status_reg)); + return -EIO; + } + + /* now check DMA interrupt status */ + cl_dma_intr_status = snd_sof_dsp_read(sdev, HDA_DSP_BAR, + sd_offset + SOF_HDA_ADSP_REG_SD_STS); + + if (!(cl_dma_intr_status & HDA_CL_DMA_SD_INT_COMPLETE)) { + dev_err(sdev->dev, "cldma copy failed\n"); + return -EIO; + } + + dev_dbg(sdev->dev, "cldma buffer copy complete\n"); + return 0; +} + +static int +cl_skl_cldma_copy_to_buf(struct snd_sof_dev *sdev, + struct snd_dma_buffer *dmab, + const void *bin, + u32 total_size, u32 bufsize) +{ + unsigned int bytes_left = total_size; + const void *curr_pos = bin; + int ret; + + if (total_size <= 0) + return -EINVAL; + + while (bytes_left > 0) { + if (bytes_left > bufsize) { + dev_dbg(sdev->dev, "cldma copy %#x bytes\n", bufsize); + + cl_skl_cldma_fill_buffer(sdev, dmab, bufsize, bufsize, curr_pos, true); + + ret = cl_skl_cldma_wait_interruptible(sdev, false); + if (ret < 0) { + dev_err(sdev->dev, "%s: fw failed to load. %#x bytes remaining\n", + __func__, bytes_left); + return ret; + } + + bytes_left -= bufsize; + curr_pos += bufsize; + } else { + dev_dbg(sdev->dev, "cldma copy %#x bytes\n", bytes_left); + + cl_skl_cldma_set_intr(sdev, false); + cl_skl_cldma_fill_buffer(sdev, dmab, bufsize, bytes_left, curr_pos, false); + return 0; + } + } + + return bytes_left; +} + +static int cl_copy_fw_skl(struct snd_sof_dev *sdev, + struct snd_dma_buffer *dmab) + +{ + const struct firmware *fw = sdev->basefw.fw; + struct firmware stripped_firmware; + unsigned int bufsize = HDA_SKL_CLDMA_MAX_BUFFER_SIZE; + int ret; + + stripped_firmware.data = fw->data + sdev->basefw.payload_offset; + stripped_firmware.size = fw->size - sdev->basefw.payload_offset; + + dev_dbg(sdev->dev, "firmware size: %#zx buffer size %#x\n", fw->size, bufsize); + + ret = cl_skl_cldma_copy_to_buf(sdev, dmab, stripped_firmware.data, + stripped_firmware.size, bufsize); + if (ret < 0) + dev_err(sdev->dev, "%s: fw copy failed %d\n", __func__, ret); + + return ret; +} + +int hda_dsp_cl_boot_firmware_skl(struct snd_sof_dev *sdev) +{ + struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; + const struct sof_intel_dsp_desc *chip = hda->desc; + struct snd_dma_buffer dmab_bdl; + struct snd_dma_buffer dmab; + unsigned int reg; + u32 flags; + int ret; + + ret = cl_dsp_init_skl(sdev, &dmab, &dmab_bdl); + + /* retry enabling core and ROM load. seemed to help */ + if (ret < 0) { + ret = cl_dsp_init_skl(sdev, &dmab, &dmab_bdl); + if (ret < 0) { + dev_err(sdev->dev, "Error code=%#x: FW status=%#x\n", + snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_SRAM_REG_ROM_ERROR), + snd_sof_dsp_read(sdev, HDA_DSP_BAR, chip->rom_status_reg)); + dev_err(sdev->dev, "Core En/ROM load fail:%d\n", ret); + return ret; + } + } + + dev_dbg(sdev->dev, "ROM init successful\n"); + + /* at this point DSP ROM has been initialized and should be ready for + * code loading and firmware boot + */ + ret = cl_copy_fw_skl(sdev, &dmab); + if (ret < 0) { + dev_err(sdev->dev, "%s: load firmware failed : %d\n", __func__, ret); + goto err; + } + + ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, + chip->rom_status_reg, reg, + (FSR_TO_STATE_CODE(reg) + == FSR_STATE_ROM_BASEFW_ENTERED), + HDA_DSP_REG_POLL_INTERVAL_US, + HDA_DSP_BASEFW_TIMEOUT_US); + + dev_dbg(sdev->dev, "Firmware download successful, booting...\n"); + + cl_skl_cldma_stream_run(sdev, false); + cl_cleanup_skl(sdev, &dmab, &dmab_bdl); + + if (!ret) + return chip->init_core_mask; + + return ret; + +err: + flags = SOF_DBG_DUMP_PCI | SOF_DBG_DUMP_MBOX; + + snd_sof_dsp_dbg_dump(sdev, "Boot failed\n", flags); + + /* power down DSP */ + hda_dsp_core_reset_power_down(sdev, chip->init_core_mask); + cl_skl_cldma_stream_run(sdev, false); + cl_cleanup_skl(sdev, &dmab, &dmab_bdl); + + dev_err(sdev->dev, "%s: load fw failed err: %d\n", __func__, ret); + return ret; +} |