1 files changed, 389 insertions, 0 deletions
diff --git a/sound/soc/sof/pm.c b/sound/soc/sof/pm.c
new file mode 100644
index 0000000000..704b21413c
--- /dev/null
+++ b/sound/soc/sof/pm.c
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+//
+// This file is provided under a dual BSD/GPLv2 license.  When using or
+// redistributing this file, you may do so under either license.
+//
+// Copyright(c) 2018 Intel Corporation. All rights reserved.
+//
+// Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
+//
+
+#include "ops.h"
+#include "sof-priv.h"
+#include "sof-audio.h"
+
+/*
+ * Helper function to determine the target DSP state during
+ * system suspend. This function only cares about the device
+ * D-states. Platform-specific substates, if any, should be
+ * handled by the platform-specific parts.
+ */
+static u32 snd_sof_dsp_power_target(struct snd_sof_dev *sdev)
+{
+	u32 target_dsp_state;
+
+	switch (sdev->system_suspend_target) {
+	case SOF_SUSPEND_S5:
+	case SOF_SUSPEND_S4:
+		/* DSP should be in D3 if the system is suspending to S3+ */
+	case SOF_SUSPEND_S3:
+		/* DSP should be in D3 if the system is suspending to S3 */
+		target_dsp_state = SOF_DSP_PM_D3;
+		break;
+	case SOF_SUSPEND_S0IX:
+		/*
+		 * Currently, the only criterion for retaining the DSP in D0
+		 * is that there are streams that ignored the suspend trigger.
+		 * Additional criteria such Soundwire clock-stop mode and
+		 * device suspend latency considerations will be added later.
+		 */
+		if (snd_sof_stream_suspend_ignored(sdev))
+			target_dsp_state = SOF_DSP_PM_D0;
+		else
+			target_dsp_state = SOF_DSP_PM_D3;
+		break;
+	default:
+		/* This case would be during runtime suspend */
+		target_dsp_state = SOF_DSP_PM_D3;
+		break;
+	}
+
+	return target_dsp_state;
+}
+
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
+static void sof_cache_debugfs(struct snd_sof_dev *sdev)
+{
+	struct snd_sof_dfsentry *dfse;
+
+	list_for_each_entry(dfse, &sdev->dfsentry_list, list) {
+
+		/* nothing to do if debugfs buffer is not IO mem */
+		if (dfse->type == SOF_DFSENTRY_TYPE_BUF)
+			continue;
+
+		/* cache memory that is only accessible in D0 */
+		if (dfse->access_type == SOF_DEBUGFS_ACCESS_D0_ONLY)
+			memcpy_fromio(dfse->cache_buf, dfse->io_mem,
+				      dfse->size);
+	}
+}
+#endif
+
+static int sof_resume(struct device *dev, bool runtime_resume)
+{
+	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
+	const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm);
+	const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
+	u32 old_state = sdev->dsp_power_state.state;
+	int ret;
+
+	/* do nothing if dsp resume callbacks are not set */
+	if (!runtime_resume && !sof_ops(sdev)->resume)
+		return 0;
+
+	if (runtime_resume && !sof_ops(sdev)->runtime_resume)
+		return 0;
+
+	/* DSP was never successfully started, nothing to resume */
+	if (sdev->first_boot)
+		return 0;
+
+	/*
+	 * if the runtime_resume flag is set, call the runtime_resume routine
+	 * or else call the system resume routine
+	 */
+	if (runtime_resume)
+		ret = snd_sof_dsp_runtime_resume(sdev);
+	else
+		ret = snd_sof_dsp_resume(sdev);
+	if (ret < 0) {
+		dev_err(sdev->dev,
+			"error: failed to power up DSP after resume\n");
+		return ret;
+	}
+
+	if (sdev->dspless_mode_selected) {
+		sof_set_fw_state(sdev, SOF_DSPLESS_MODE);
+		return 0;
+	}
+
+	/*
+	 * Nothing further to be done for platforms that support the low power
+	 * D0 substate. Resume trace and return when resuming from
+	 * low-power D0 substate
+	 */
+	if (!runtime_resume && sof_ops(sdev)->set_power_state &&
+	    old_state == SOF_DSP_PM_D0) {
+		ret = sof_fw_trace_resume(sdev);
+		if (ret < 0)
+			/* non fatal */
+			dev_warn(sdev->dev,
+				 "failed to enable trace after resume %d\n", ret);
+		return 0;
+	}
+
+	sof_set_fw_state(sdev, SOF_FW_BOOT_PREPARE);
+
+	/* load the firmware */
+	ret = snd_sof_load_firmware(sdev);
+	if (ret < 0) {
+		dev_err(sdev->dev,
+			"error: failed to load DSP firmware after resume %d\n",
+			ret);
+		sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED);
+		return ret;
+	}
+
+	sof_set_fw_state(sdev, SOF_FW_BOOT_IN_PROGRESS);
+
+	/*
+	 * Boot the firmware. The FW boot status will be modified
+	 * in snd_sof_run_firmware() depending on the outcome.
+	 */
+	ret = snd_sof_run_firmware(sdev);
+	if (ret < 0) {
+		dev_err(sdev->dev,
+			"error: failed to boot DSP firmware after resume %d\n",
+			ret);
+		sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED);
+		return ret;
+	}
+
+	/* resume DMA trace */
+	ret = sof_fw_trace_resume(sdev);
+	if (ret < 0) {
+		/* non fatal */
+		dev_warn(sdev->dev,
+			 "warning: failed to init trace after resume %d\n",
+			 ret);
+	}
+
+	/* restore pipelines */
+	if (tplg_ops && tplg_ops->set_up_all_pipelines) {
+		ret = tplg_ops->set_up_all_pipelines(sdev, false);
+		if (ret < 0) {
+			dev_err(sdev->dev, "Failed to restore pipeline after resume %d\n", ret);
+			goto setup_fail;
+		}
+	}
+
+	/* Notify clients not managed by pm framework about core resume */
+	sof_resume_clients(sdev);
+
+	/* notify DSP of system resume */
+	if (pm_ops && pm_ops->ctx_restore) {
+		ret = pm_ops->ctx_restore(sdev);
+		if (ret < 0)
+			dev_err(sdev->dev, "ctx_restore IPC error during resume: %d\n", ret);
+	}
+
+setup_fail:
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
+	if (ret < 0) {
+		/*
+		 * Debugfs cannot be read in runtime suspend, so cache
+		 * the contents upon failure. This allows to capture
+		 * possible DSP coredump information.
+		 */
+		sof_cache_debugfs(sdev);
+	}
+#endif
+
+	return ret;
+}
+
+static int sof_suspend(struct device *dev, bool runtime_suspend)
+{
+	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
+	const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm);
+	const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
+	pm_message_t pm_state;
+	u32 target_state = snd_sof_dsp_power_target(sdev);
+	u32 old_state = sdev->dsp_power_state.state;
+	int ret;
+
+	/* do nothing if dsp suspend callback is not set */
+	if (!runtime_suspend && !sof_ops(sdev)->suspend)
+		return 0;
+
+	if (runtime_suspend && !sof_ops(sdev)->runtime_suspend)
+		return 0;
+
+	/* we need to tear down pipelines only if the DSP hardware is
+	 * active, which happens for PCI devices. if the device is
+	 * suspended, it is brought back to full power and then
+	 * suspended again
+	 */
+	if (tplg_ops && tplg_ops->tear_down_all_pipelines && (old_state == SOF_DSP_PM_D0))
+		tplg_ops->tear_down_all_pipelines(sdev, false);
+
+	if (sdev->fw_state != SOF_FW_BOOT_COMPLETE)
+		goto suspend;
+
+	/* prepare for streams to be resumed properly upon resume */
+	if (!runtime_suspend) {
+		ret = snd_sof_dsp_hw_params_upon_resume(sdev);
+		if (ret < 0) {
+			dev_err(sdev->dev,
+				"error: setting hw_params flag during suspend %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	pm_state.event = target_state;
+
+	/* suspend DMA trace */
+	sof_fw_trace_suspend(sdev, pm_state);
+
+	/* Notify clients not managed by pm framework about core suspend */
+	sof_suspend_clients(sdev, pm_state);
+
+	/* Skip to platform-specific suspend if DSP is entering D0 */
+	if (target_state == SOF_DSP_PM_D0)
+		goto suspend;
+
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
+	/* cache debugfs contents during runtime suspend */
+	if (runtime_suspend)
+		sof_cache_debugfs(sdev);
+#endif
+	/* notify DSP of upcoming power down */
+	if (pm_ops && pm_ops->ctx_save) {
+		ret = pm_ops->ctx_save(sdev);
+		if (ret == -EBUSY || ret == -EAGAIN) {
+			/*
+			 * runtime PM has logic to handle -EBUSY/-EAGAIN so
+			 * pass these errors up
+			 */
+			dev_err(sdev->dev, "ctx_save IPC error during suspend: %d\n", ret);
+			return ret;
+		} else if (ret < 0) {
+			/* FW in unexpected state, continue to power down */
+			dev_warn(sdev->dev, "ctx_save IPC error: %d, proceeding with suspend\n",
+				 ret);
+		}
+	}
+
+suspend:
+
+	/* return if the DSP was not probed successfully */
+	if (sdev->fw_state == SOF_FW_BOOT_NOT_STARTED)
+		return 0;
+
+	/* platform-specific suspend */
+	if (runtime_suspend)
+		ret = snd_sof_dsp_runtime_suspend(sdev);
+	else
+		ret = snd_sof_dsp_suspend(sdev, target_state);
+	if (ret < 0)
+		dev_err(sdev->dev,
+			"error: failed to power down DSP during suspend %d\n",
+			ret);
+
+	/* Do not reset FW state if DSP is in D0 */
+	if (target_state == SOF_DSP_PM_D0)
+		return ret;
+
+	/* reset FW state */
+	sof_set_fw_state(sdev, SOF_FW_BOOT_NOT_STARTED);
+	sdev->enabled_cores_mask = 0;
+
+	return ret;
+}
+
+int snd_sof_dsp_power_down_notify(struct snd_sof_dev *sdev)
+{
+	const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm);
+
+	/* Notify DSP of upcoming power down */
+	if (sof_ops(sdev)->remove && pm_ops && pm_ops->ctx_save)
+		return pm_ops->ctx_save(sdev);
+
+	return 0;
+}
+
+int snd_sof_runtime_suspend(struct device *dev)
+{
+	return sof_suspend(dev, true);
+}
+EXPORT_SYMBOL(snd_sof_runtime_suspend);
+
+int snd_sof_runtime_idle(struct device *dev)
+{
+	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
+
+	return snd_sof_dsp_runtime_idle(sdev);
+}
+EXPORT_SYMBOL(snd_sof_runtime_idle);
+
+int snd_sof_runtime_resume(struct device *dev)
+{
+	return sof_resume(dev, true);
+}
+EXPORT_SYMBOL(snd_sof_runtime_resume);
+
+int snd_sof_resume(struct device *dev)
+{
+	return sof_resume(dev, false);
+}
+EXPORT_SYMBOL(snd_sof_resume);
+
+int snd_sof_suspend(struct device *dev)
+{
+	return sof_suspend(dev, false);
+}
+EXPORT_SYMBOL(snd_sof_suspend);
+
+int snd_sof_prepare(struct device *dev)
+{
+	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
+	const struct sof_dev_desc *desc = sdev->pdata->desc;
+
+	/* will suspend to S3 by default */
+	sdev->system_suspend_target = SOF_SUSPEND_S3;
+
+	/*
+	 * if the firmware is crashed or boot failed then we try to aim for S3
+	 * to reboot the firmware
+	 */
+	if (sdev->fw_state == SOF_FW_CRASHED ||
+	    sdev->fw_state == SOF_FW_BOOT_FAILED)
+		return 0;
+
+	if (!desc->use_acpi_target_states)
+		return 0;
+
+#if defined(CONFIG_ACPI)
+	switch (acpi_target_system_state()) {
+	case ACPI_STATE_S0:
+		sdev->system_suspend_target = SOF_SUSPEND_S0IX;
+		break;
+	case ACPI_STATE_S1:
+	case ACPI_STATE_S2:
+	case ACPI_STATE_S3:
+		sdev->system_suspend_target = SOF_SUSPEND_S3;
+		break;
+	case ACPI_STATE_S4:
+		sdev->system_suspend_target = SOF_SUSPEND_S4;
+		break;
+	case ACPI_STATE_S5:
+		sdev->system_suspend_target = SOF_SUSPEND_S5;
+		break;
+	default:
+		break;
+	}
+#endif
+
+	return 0;
+}
+EXPORT_SYMBOL(snd_sof_prepare);
+
+void snd_sof_complete(struct device *dev)
+{
+	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
+
+	sdev->system_suspend_target = SOF_SUSPEND_NONE;
+}
+EXPORT_SYMBOL(snd_sof_complete);