diff options
Diffstat (limited to 'sound/usb/hiface')
-rw-r--r-- | sound/usb/hiface/Makefile | 3 | ||||
-rw-r--r-- | sound/usb/hiface/chip.c | 276 | ||||
-rw-r--r-- | sound/usb/hiface/chip.h | 26 | ||||
-rw-r--r-- | sound/usb/hiface/pcm.c | 612 | ||||
-rw-r--r-- | sound/usb/hiface/pcm.h | 20 |
5 files changed, 937 insertions, 0 deletions
diff --git a/sound/usb/hiface/Makefile b/sound/usb/hiface/Makefile new file mode 100644 index 0000000000..8f3b24e7d6 --- /dev/null +++ b/sound/usb/hiface/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +snd-usb-hiface-objs := chip.o pcm.o +obj-$(CONFIG_SND_USB_HIFACE) += snd-usb-hiface.o diff --git a/sound/usb/hiface/chip.c b/sound/usb/hiface/chip.c new file mode 100644 index 0000000000..95385e9088 --- /dev/null +++ b/sound/usb/hiface/chip.c @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Linux driver for M2Tech hiFace compatible devices + * + * Copyright 2012-2013 (C) M2TECH S.r.l and Amarula Solutions B.V. + * + * Authors: Michael Trimarchi <michael@amarulasolutions.com> + * Antonio Ospite <ao2@amarulasolutions.com> + * + * The driver is based on the work done in TerraTec DMX 6Fire USB + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <sound/initval.h> + +#include "chip.h" +#include "pcm.h" + +MODULE_AUTHOR("Michael Trimarchi <michael@amarulasolutions.com>"); +MODULE_AUTHOR("Antonio Ospite <ao2@amarulasolutions.com>"); +MODULE_DESCRIPTION("M2Tech hiFace USB-SPDIF audio driver"); +MODULE_LICENSE("GPL v2"); + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */ +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for card */ +static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */ + +#define DRIVER_NAME "snd-usb-hiface" +#define CARD_NAME "hiFace" + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard."); +module_param_array(id, charp, NULL, 0444); +MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard."); +module_param_array(enable, bool, NULL, 0444); +MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard."); + +static DEFINE_MUTEX(register_mutex); + +struct hiface_vendor_quirk { + const char *device_name; + u8 extra_freq; +}; + +static int hiface_chip_create(struct usb_interface *intf, + struct usb_device *device, int idx, + const struct hiface_vendor_quirk *quirk, + struct hiface_chip **rchip) +{ + struct snd_card *card = NULL; + struct hiface_chip *chip; + int ret; + int len; + + *rchip = NULL; + + /* if we are here, card can be registered in alsa. */ + ret = snd_card_new(&intf->dev, index[idx], id[idx], THIS_MODULE, + sizeof(*chip), &card); + if (ret < 0) { + dev_err(&device->dev, "cannot create alsa card.\n"); + return ret; + } + + strscpy(card->driver, DRIVER_NAME, sizeof(card->driver)); + + if (quirk && quirk->device_name) + strscpy(card->shortname, quirk->device_name, sizeof(card->shortname)); + else + strscpy(card->shortname, "M2Tech generic audio", sizeof(card->shortname)); + + strlcat(card->longname, card->shortname, sizeof(card->longname)); + len = strlcat(card->longname, " at ", sizeof(card->longname)); + if (len < sizeof(card->longname)) + usb_make_path(device, card->longname + len, + sizeof(card->longname) - len); + + chip = card->private_data; + chip->dev = device; + chip->card = card; + + *rchip = chip; + return 0; +} + +static int hiface_chip_probe(struct usb_interface *intf, + const struct usb_device_id *usb_id) +{ + const struct hiface_vendor_quirk *quirk = (struct hiface_vendor_quirk *)usb_id->driver_info; + int ret; + int i; + struct hiface_chip *chip; + struct usb_device *device = interface_to_usbdev(intf); + + ret = usb_set_interface(device, 0, 0); + if (ret != 0) { + dev_err(&device->dev, "can't set first interface for " CARD_NAME " device.\n"); + return -EIO; + } + + /* check whether the card is already registered */ + chip = NULL; + mutex_lock(®ister_mutex); + + for (i = 0; i < SNDRV_CARDS; i++) + if (enable[i]) + break; + + if (i >= SNDRV_CARDS) { + dev_err(&device->dev, "no available " CARD_NAME " audio device\n"); + ret = -ENODEV; + goto err; + } + + ret = hiface_chip_create(intf, device, i, quirk, &chip); + if (ret < 0) + goto err; + + ret = hiface_pcm_init(chip, quirk ? quirk->extra_freq : 0); + if (ret < 0) + goto err_chip_destroy; + + ret = snd_card_register(chip->card); + if (ret < 0) { + dev_err(&device->dev, "cannot register " CARD_NAME " card\n"); + goto err_chip_destroy; + } + + mutex_unlock(®ister_mutex); + + usb_set_intfdata(intf, chip); + return 0; + +err_chip_destroy: + snd_card_free(chip->card); +err: + mutex_unlock(®ister_mutex); + return ret; +} + +static void hiface_chip_disconnect(struct usb_interface *intf) +{ + struct hiface_chip *chip; + struct snd_card *card; + + chip = usb_get_intfdata(intf); + if (!chip) + return; + + card = chip->card; + + /* Make sure that the userspace cannot create new request */ + snd_card_disconnect(card); + + hiface_pcm_abort(chip); + snd_card_free_when_closed(card); +} + +static const struct usb_device_id device_table[] = { + { + USB_DEVICE(0x04b4, 0x0384), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Young", + .extra_freq = 1, + } + }, + { + USB_DEVICE(0x04b4, 0x930b), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "hiFace", + } + }, + { + USB_DEVICE(0x04b4, 0x931b), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "North Star", + } + }, + { + USB_DEVICE(0x04b4, 0x931c), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "W4S Young", + } + }, + { + USB_DEVICE(0x04b4, 0x931d), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Corrson", + } + }, + { + USB_DEVICE(0x04b4, 0x931e), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "AUDIA", + } + }, + { + USB_DEVICE(0x04b4, 0x931f), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "SL Audio", + } + }, + { + USB_DEVICE(0x04b4, 0x9320), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Empirical", + } + }, + { + USB_DEVICE(0x04b4, 0x9321), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Rockna", + } + }, + { + USB_DEVICE(0x249c, 0x9001), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Pathos", + } + }, + { + USB_DEVICE(0x249c, 0x9002), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Metronome", + } + }, + { + USB_DEVICE(0x249c, 0x9006), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "CAD", + } + }, + { + USB_DEVICE(0x249c, 0x9008), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Audio Esclusive", + } + }, + { + USB_DEVICE(0x249c, 0x931c), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Rotel", + } + }, + { + USB_DEVICE(0x249c, 0x932c), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Eeaudio", + } + }, + { + USB_DEVICE(0x245f, 0x931c), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "CHORD", + } + }, + { + USB_DEVICE(0x25c6, 0x9002), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Vitus", + } + }, + {} +}; + +MODULE_DEVICE_TABLE(usb, device_table); + +static struct usb_driver hiface_usb_driver = { + .name = DRIVER_NAME, + .probe = hiface_chip_probe, + .disconnect = hiface_chip_disconnect, + .id_table = device_table, +}; + +module_usb_driver(hiface_usb_driver); diff --git a/sound/usb/hiface/chip.h b/sound/usb/hiface/chip.h new file mode 100644 index 0000000000..eb7a5cfb4d --- /dev/null +++ b/sound/usb/hiface/chip.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Linux driver for M2Tech hiFace compatible devices + * + * Copyright 2012-2013 (C) M2TECH S.r.l and Amarula Solutions B.V. + * + * Authors: Michael Trimarchi <michael@amarulasolutions.com> + * Antonio Ospite <ao2@amarulasolutions.com> + * + * The driver is based on the work done in TerraTec DMX 6Fire USB + */ + +#ifndef HIFACE_CHIP_H +#define HIFACE_CHIP_H + +#include <linux/usb.h> +#include <sound/core.h> + +struct pcm_runtime; + +struct hiface_chip { + struct usb_device *dev; + struct snd_card *card; + struct pcm_runtime *pcm; +}; +#endif /* HIFACE_CHIP_H */ diff --git a/sound/usb/hiface/pcm.c b/sound/usb/hiface/pcm.c new file mode 100644 index 0000000000..cf650fab54 --- /dev/null +++ b/sound/usb/hiface/pcm.c @@ -0,0 +1,612 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Linux driver for M2Tech hiFace compatible devices + * + * Copyright 2012-2013 (C) M2TECH S.r.l and Amarula Solutions B.V. + * + * Authors: Michael Trimarchi <michael@amarulasolutions.com> + * Antonio Ospite <ao2@amarulasolutions.com> + * + * The driver is based on the work done in TerraTec DMX 6Fire USB + */ + +#include <linux/slab.h> +#include <sound/pcm.h> + +#include "pcm.h" +#include "chip.h" + +#define OUT_EP 0x2 +#define PCM_N_URBS 8 +#define PCM_PACKET_SIZE 4096 +#define PCM_BUFFER_SIZE (2 * PCM_N_URBS * PCM_PACKET_SIZE) + +struct pcm_urb { + struct hiface_chip *chip; + + struct urb instance; + struct usb_anchor submitted; + u8 *buffer; +}; + +struct pcm_substream { + spinlock_t lock; + struct snd_pcm_substream *instance; + + bool active; + snd_pcm_uframes_t dma_off; /* current position in alsa dma_area */ + snd_pcm_uframes_t period_off; /* current position in current period */ +}; + +enum { /* pcm streaming states */ + STREAM_DISABLED, /* no pcm streaming */ + STREAM_STARTING, /* pcm streaming requested, waiting to become ready */ + STREAM_RUNNING, /* pcm streaming running */ + STREAM_STOPPING +}; + +struct pcm_runtime { + struct hiface_chip *chip; + struct snd_pcm *instance; + + struct pcm_substream playback; + bool panic; /* if set driver won't do anymore pcm on device */ + + struct pcm_urb out_urbs[PCM_N_URBS]; + + struct mutex stream_mutex; + u8 stream_state; /* one of STREAM_XXX */ + u8 extra_freq; + wait_queue_head_t stream_wait_queue; + bool stream_wait_cond; +}; + +static const unsigned int rates[] = { 44100, 48000, 88200, 96000, 176400, 192000, + 352800, 384000 }; +static const struct snd_pcm_hw_constraint_list constraints_extra_rates = { + .count = ARRAY_SIZE(rates), + .list = rates, + .mask = 0, +}; + +static const struct snd_pcm_hardware pcm_hw = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_PAUSE | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, + + .formats = SNDRV_PCM_FMTBIT_S32_LE, + + .rates = SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_176400 | + SNDRV_PCM_RATE_192000, + + .rate_min = 44100, + .rate_max = 192000, /* changes in hiface_pcm_open to support extra rates */ + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = PCM_BUFFER_SIZE, + .period_bytes_min = PCM_PACKET_SIZE, + .period_bytes_max = PCM_BUFFER_SIZE, + .periods_min = 2, + .periods_max = 1024 +}; + +/* message values used to change the sample rate */ +#define HIFACE_SET_RATE_REQUEST 0xb0 + +#define HIFACE_RATE_44100 0x43 +#define HIFACE_RATE_48000 0x4b +#define HIFACE_RATE_88200 0x42 +#define HIFACE_RATE_96000 0x4a +#define HIFACE_RATE_176400 0x40 +#define HIFACE_RATE_192000 0x48 +#define HIFACE_RATE_352800 0x58 +#define HIFACE_RATE_384000 0x68 + +static int hiface_pcm_set_rate(struct pcm_runtime *rt, unsigned int rate) +{ + struct usb_device *device = rt->chip->dev; + u16 rate_value; + int ret; + + /* We are already sure that the rate is supported here thanks to + * ALSA constraints + */ + switch (rate) { + case 44100: + rate_value = HIFACE_RATE_44100; + break; + case 48000: + rate_value = HIFACE_RATE_48000; + break; + case 88200: + rate_value = HIFACE_RATE_88200; + break; + case 96000: + rate_value = HIFACE_RATE_96000; + break; + case 176400: + rate_value = HIFACE_RATE_176400; + break; + case 192000: + rate_value = HIFACE_RATE_192000; + break; + case 352800: + rate_value = HIFACE_RATE_352800; + break; + case 384000: + rate_value = HIFACE_RATE_384000; + break; + default: + dev_err(&device->dev, "Unsupported rate %d\n", rate); + return -EINVAL; + } + + /* + * USBIO: Vendor 0xb0(wValue=0x0043, wIndex=0x0000) + * 43 b0 43 00 00 00 00 00 + * USBIO: Vendor 0xb0(wValue=0x004b, wIndex=0x0000) + * 43 b0 4b 00 00 00 00 00 + * This control message doesn't have any ack from the + * other side + */ + ret = usb_control_msg_send(device, 0, + HIFACE_SET_RATE_REQUEST, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, + rate_value, 0, NULL, 0, 100, GFP_KERNEL); + if (ret) + dev_err(&device->dev, "Error setting samplerate %d.\n", rate); + + return ret; +} + +static struct pcm_substream *hiface_pcm_get_substream(struct snd_pcm_substream + *alsa_sub) +{ + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + struct device *device = &rt->chip->dev->dev; + + if (alsa_sub->stream == SNDRV_PCM_STREAM_PLAYBACK) + return &rt->playback; + + dev_err(device, "Error getting pcm substream slot.\n"); + return NULL; +} + +/* call with stream_mutex locked */ +static void hiface_pcm_stream_stop(struct pcm_runtime *rt) +{ + int i, time; + + if (rt->stream_state != STREAM_DISABLED) { + rt->stream_state = STREAM_STOPPING; + + for (i = 0; i < PCM_N_URBS; i++) { + time = usb_wait_anchor_empty_timeout( + &rt->out_urbs[i].submitted, 100); + if (!time) + usb_kill_anchored_urbs( + &rt->out_urbs[i].submitted); + usb_kill_urb(&rt->out_urbs[i].instance); + } + + rt->stream_state = STREAM_DISABLED; + } +} + +/* call with stream_mutex locked */ +static int hiface_pcm_stream_start(struct pcm_runtime *rt) +{ + int ret = 0; + int i; + + if (rt->stream_state == STREAM_DISABLED) { + + /* reset panic state when starting a new stream */ + rt->panic = false; + + /* submit our out urbs zero init */ + rt->stream_state = STREAM_STARTING; + for (i = 0; i < PCM_N_URBS; i++) { + memset(rt->out_urbs[i].buffer, 0, PCM_PACKET_SIZE); + usb_anchor_urb(&rt->out_urbs[i].instance, + &rt->out_urbs[i].submitted); + ret = usb_submit_urb(&rt->out_urbs[i].instance, + GFP_ATOMIC); + if (ret) { + hiface_pcm_stream_stop(rt); + return ret; + } + } + + /* wait for first out urb to return (sent in urb handler) */ + wait_event_timeout(rt->stream_wait_queue, rt->stream_wait_cond, + HZ); + if (rt->stream_wait_cond) { + struct device *device = &rt->chip->dev->dev; + dev_dbg(device, "%s: Stream is running wakeup event\n", + __func__); + rt->stream_state = STREAM_RUNNING; + } else { + hiface_pcm_stream_stop(rt); + return -EIO; + } + } + return ret; +} + +/* The hardware wants word-swapped 32-bit values */ +static void memcpy_swahw32(u8 *dest, u8 *src, unsigned int n) +{ + unsigned int i; + + for (i = 0; i < n / 4; i++) + ((u32 *)dest)[i] = swahw32(((u32 *)src)[i]); +} + +/* call with substream locked */ +/* returns true if a period elapsed */ +static bool hiface_pcm_playback(struct pcm_substream *sub, struct pcm_urb *urb) +{ + struct snd_pcm_runtime *alsa_rt = sub->instance->runtime; + struct device *device = &urb->chip->dev->dev; + u8 *source; + unsigned int pcm_buffer_size; + + WARN_ON(alsa_rt->format != SNDRV_PCM_FORMAT_S32_LE); + + pcm_buffer_size = snd_pcm_lib_buffer_bytes(sub->instance); + + if (sub->dma_off + PCM_PACKET_SIZE <= pcm_buffer_size) { + dev_dbg(device, "%s: (1) buffer_size %#x dma_offset %#x\n", __func__, + (unsigned int) pcm_buffer_size, + (unsigned int) sub->dma_off); + + source = alsa_rt->dma_area + sub->dma_off; + memcpy_swahw32(urb->buffer, source, PCM_PACKET_SIZE); + } else { + /* wrap around at end of ring buffer */ + unsigned int len; + + dev_dbg(device, "%s: (2) buffer_size %#x dma_offset %#x\n", __func__, + (unsigned int) pcm_buffer_size, + (unsigned int) sub->dma_off); + + len = pcm_buffer_size - sub->dma_off; + + source = alsa_rt->dma_area + sub->dma_off; + memcpy_swahw32(urb->buffer, source, len); + + source = alsa_rt->dma_area; + memcpy_swahw32(urb->buffer + len, source, + PCM_PACKET_SIZE - len); + } + sub->dma_off += PCM_PACKET_SIZE; + if (sub->dma_off >= pcm_buffer_size) + sub->dma_off -= pcm_buffer_size; + + sub->period_off += PCM_PACKET_SIZE; + if (sub->period_off >= alsa_rt->period_size) { + sub->period_off %= alsa_rt->period_size; + return true; + } + return false; +} + +static void hiface_pcm_out_urb_handler(struct urb *usb_urb) +{ + struct pcm_urb *out_urb = usb_urb->context; + struct pcm_runtime *rt = out_urb->chip->pcm; + struct pcm_substream *sub; + bool do_period_elapsed = false; + unsigned long flags; + int ret; + + if (rt->panic || rt->stream_state == STREAM_STOPPING) + return; + + if (unlikely(usb_urb->status == -ENOENT || /* unlinked */ + usb_urb->status == -ENODEV || /* device removed */ + usb_urb->status == -ECONNRESET || /* unlinked */ + usb_urb->status == -ESHUTDOWN)) { /* device disabled */ + goto out_fail; + } + + if (rt->stream_state == STREAM_STARTING) { + rt->stream_wait_cond = true; + wake_up(&rt->stream_wait_queue); + } + + /* now send our playback data (if a free out urb was found) */ + sub = &rt->playback; + spin_lock_irqsave(&sub->lock, flags); + if (sub->active) + do_period_elapsed = hiface_pcm_playback(sub, out_urb); + else + memset(out_urb->buffer, 0, PCM_PACKET_SIZE); + + spin_unlock_irqrestore(&sub->lock, flags); + + if (do_period_elapsed) + snd_pcm_period_elapsed(sub->instance); + + ret = usb_submit_urb(&out_urb->instance, GFP_ATOMIC); + if (ret < 0) + goto out_fail; + + return; + +out_fail: + rt->panic = true; +} + +static int hiface_pcm_open(struct snd_pcm_substream *alsa_sub) +{ + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + struct pcm_substream *sub = NULL; + struct snd_pcm_runtime *alsa_rt = alsa_sub->runtime; + int ret; + + if (rt->panic) + return -EPIPE; + + mutex_lock(&rt->stream_mutex); + alsa_rt->hw = pcm_hw; + + if (alsa_sub->stream == SNDRV_PCM_STREAM_PLAYBACK) + sub = &rt->playback; + + if (!sub) { + struct device *device = &rt->chip->dev->dev; + mutex_unlock(&rt->stream_mutex); + dev_err(device, "Invalid stream type\n"); + return -EINVAL; + } + + if (rt->extra_freq) { + alsa_rt->hw.rates |= SNDRV_PCM_RATE_KNOT; + alsa_rt->hw.rate_max = 384000; + + /* explicit constraints needed as we added SNDRV_PCM_RATE_KNOT */ + ret = snd_pcm_hw_constraint_list(alsa_sub->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &constraints_extra_rates); + if (ret < 0) { + mutex_unlock(&rt->stream_mutex); + return ret; + } + } + + sub->instance = alsa_sub; + sub->active = false; + mutex_unlock(&rt->stream_mutex); + return 0; +} + +static int hiface_pcm_close(struct snd_pcm_substream *alsa_sub) +{ + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + struct pcm_substream *sub = hiface_pcm_get_substream(alsa_sub); + unsigned long flags; + + if (rt->panic) + return 0; + + mutex_lock(&rt->stream_mutex); + if (sub) { + hiface_pcm_stream_stop(rt); + + /* deactivate substream */ + spin_lock_irqsave(&sub->lock, flags); + sub->instance = NULL; + sub->active = false; + spin_unlock_irqrestore(&sub->lock, flags); + + } + mutex_unlock(&rt->stream_mutex); + return 0; +} + +static int hiface_pcm_prepare(struct snd_pcm_substream *alsa_sub) +{ + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + struct pcm_substream *sub = hiface_pcm_get_substream(alsa_sub); + struct snd_pcm_runtime *alsa_rt = alsa_sub->runtime; + int ret; + + if (rt->panic) + return -EPIPE; + if (!sub) + return -ENODEV; + + mutex_lock(&rt->stream_mutex); + + hiface_pcm_stream_stop(rt); + + sub->dma_off = 0; + sub->period_off = 0; + + if (rt->stream_state == STREAM_DISABLED) { + + ret = hiface_pcm_set_rate(rt, alsa_rt->rate); + if (ret) { + mutex_unlock(&rt->stream_mutex); + return ret; + } + ret = hiface_pcm_stream_start(rt); + if (ret) { + mutex_unlock(&rt->stream_mutex); + return ret; + } + } + mutex_unlock(&rt->stream_mutex); + return 0; +} + +static int hiface_pcm_trigger(struct snd_pcm_substream *alsa_sub, int cmd) +{ + struct pcm_substream *sub = hiface_pcm_get_substream(alsa_sub); + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + + if (rt->panic) + return -EPIPE; + if (!sub) + return -ENODEV; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + spin_lock_irq(&sub->lock); + sub->active = true; + spin_unlock_irq(&sub->lock); + return 0; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + spin_lock_irq(&sub->lock); + sub->active = false; + spin_unlock_irq(&sub->lock); + return 0; + + default: + return -EINVAL; + } +} + +static snd_pcm_uframes_t hiface_pcm_pointer(struct snd_pcm_substream *alsa_sub) +{ + struct pcm_substream *sub = hiface_pcm_get_substream(alsa_sub); + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + unsigned long flags; + snd_pcm_uframes_t dma_offset; + + if (rt->panic || !sub) + return SNDRV_PCM_POS_XRUN; + + spin_lock_irqsave(&sub->lock, flags); + dma_offset = sub->dma_off; + spin_unlock_irqrestore(&sub->lock, flags); + return bytes_to_frames(alsa_sub->runtime, dma_offset); +} + +static const struct snd_pcm_ops pcm_ops = { + .open = hiface_pcm_open, + .close = hiface_pcm_close, + .prepare = hiface_pcm_prepare, + .trigger = hiface_pcm_trigger, + .pointer = hiface_pcm_pointer, +}; + +static int hiface_pcm_init_urb(struct pcm_urb *urb, + struct hiface_chip *chip, + unsigned int ep, + void (*handler)(struct urb *)) +{ + urb->chip = chip; + usb_init_urb(&urb->instance); + + urb->buffer = kzalloc(PCM_PACKET_SIZE, GFP_KERNEL); + if (!urb->buffer) + return -ENOMEM; + + usb_fill_bulk_urb(&urb->instance, chip->dev, + usb_sndbulkpipe(chip->dev, ep), (void *)urb->buffer, + PCM_PACKET_SIZE, handler, urb); + if (usb_urb_ep_type_check(&urb->instance)) + return -EINVAL; + init_usb_anchor(&urb->submitted); + + return 0; +} + +void hiface_pcm_abort(struct hiface_chip *chip) +{ + struct pcm_runtime *rt = chip->pcm; + + if (rt) { + rt->panic = true; + + mutex_lock(&rt->stream_mutex); + hiface_pcm_stream_stop(rt); + mutex_unlock(&rt->stream_mutex); + } +} + +static void hiface_pcm_destroy(struct hiface_chip *chip) +{ + struct pcm_runtime *rt = chip->pcm; + int i; + + for (i = 0; i < PCM_N_URBS; i++) + kfree(rt->out_urbs[i].buffer); + + kfree(chip->pcm); + chip->pcm = NULL; +} + +static void hiface_pcm_free(struct snd_pcm *pcm) +{ + struct pcm_runtime *rt = pcm->private_data; + + if (rt) + hiface_pcm_destroy(rt->chip); +} + +int hiface_pcm_init(struct hiface_chip *chip, u8 extra_freq) +{ + int i; + int ret; + struct snd_pcm *pcm; + struct pcm_runtime *rt; + + rt = kzalloc(sizeof(*rt), GFP_KERNEL); + if (!rt) + return -ENOMEM; + + rt->chip = chip; + rt->stream_state = STREAM_DISABLED; + if (extra_freq) + rt->extra_freq = 1; + + init_waitqueue_head(&rt->stream_wait_queue); + mutex_init(&rt->stream_mutex); + spin_lock_init(&rt->playback.lock); + + for (i = 0; i < PCM_N_URBS; i++) { + ret = hiface_pcm_init_urb(&rt->out_urbs[i], chip, OUT_EP, + hiface_pcm_out_urb_handler); + if (ret < 0) + goto error; + } + + ret = snd_pcm_new(chip->card, "USB-SPDIF Audio", 0, 1, 0, &pcm); + if (ret < 0) { + dev_err(&chip->dev->dev, "Cannot create pcm instance\n"); + goto error; + } + + pcm->private_data = rt; + pcm->private_free = hiface_pcm_free; + + strscpy(pcm->name, "USB-SPDIF Audio", sizeof(pcm->name)); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &pcm_ops); + snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_VMALLOC, + NULL, 0, 0); + + rt->instance = pcm; + + chip->pcm = rt; + return 0; + +error: + for (i = 0; i < PCM_N_URBS; i++) + kfree(rt->out_urbs[i].buffer); + kfree(rt); + return ret; +} diff --git a/sound/usb/hiface/pcm.h b/sound/usb/hiface/pcm.h new file mode 100644 index 0000000000..afe74e978e --- /dev/null +++ b/sound/usb/hiface/pcm.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Linux driver for M2Tech hiFace compatible devices + * + * Copyright 2012-2013 (C) M2TECH S.r.l and Amarula Solutions B.V. + * + * Authors: Michael Trimarchi <michael@amarulasolutions.com> + * Antonio Ospite <ao2@amarulasolutions.com> + * + * The driver is based on the work done in TerraTec DMX 6Fire USB + */ + +#ifndef HIFACE_PCM_H +#define HIFACE_PCM_H + +struct hiface_chip; + +int hiface_pcm_init(struct hiface_chip *chip, u8 extra_freq); +void hiface_pcm_abort(struct hiface_chip *chip); +#endif /* HIFACE_PCM_H */ |