diff options
Diffstat (limited to 'sound/usb/quirks.c')
| -rw-r--r-- | sound/usb/quirks.c | 78 |
1 files changed, 61 insertions, 17 deletions
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 09712e61c6..ea063a14cd 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -984,21 +984,13 @@ static int snd_usb_axefx3_boot_quirk(struct usb_device *dev) return 0; } -static void mbox3_setup_48_24_magic(struct usb_device *dev) +static void mbox3_setup_defaults(struct usb_device *dev) { /* The Mbox 3 is "little endian" */ /* max volume is: 0x0000. */ /* min volume is: 0x0080 (shown in little endian form) */ - - /* Load 48000Hz rate into buffer */ - u8 com_buff[4] = {0x80, 0xbb, 0x00, 0x00}; - - /* Set 48000Hz sample rate */ - snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), - 0x01, 0x21, 0x0100, 0x0001, &com_buff, 4); //Is this really needed? - snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), - 0x01, 0x21, 0x0100, 0x8101, &com_buff, 4); + u8 com_buff[2]; /* Deactivate Tuner */ /* on = 0x01*/ @@ -1008,6 +1000,8 @@ static void mbox3_setup_48_24_magic(struct usb_device *dev) 0x01, 0x21, 0x0003, 0x2001, &com_buff, 1); /* Set clock source to Internal (as opposed to S/PDIF) */ + /* Internal = 0x01*/ + /* S/PDIF = 0x02*/ com_buff[0] = 0x01; snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 1, 0x21, 0x0100, 0x8001, &com_buff, 1); @@ -1113,9 +1107,11 @@ static void mbox3_setup_48_24_magic(struct usb_device *dev) 1, 0x21, 0x0107, 0x4201, &com_buff, 2); /* Toggle allowing host control */ + /* Not needed com_buff[0] = 0x02; snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 3, 0x21, 0x0000, 0x2001, &com_buff, 1); + */ /* Do not dim fx returns */ com_buff[0] = 0x00; @@ -1259,26 +1255,27 @@ static int snd_usb_mbox3_boot_quirk(struct usb_device *dev) descriptor_size = le16_to_cpu(get_cfg_desc(config)->wTotalLength); if (descriptor_size != MBOX3_DESCRIPTOR_SIZE) { - dev_err(&dev->dev, "Invalid descriptor size=%d.\n", descriptor_size); + dev_err(&dev->dev, "MBOX3: Invalid descriptor size=%d.\n", descriptor_size); return -ENODEV; } - dev_dbg(&dev->dev, "device initialised!\n"); + dev_dbg(&dev->dev, "MBOX3: device initialised!\n"); err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &dev->descriptor, sizeof(dev->descriptor)); config = dev->actconfig; if (err < 0) - dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); + dev_dbg(&dev->dev, "MBOX3: error usb_get_descriptor: %d\n", err); err = usb_reset_configuration(dev); if (err < 0) - dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); - dev_dbg(&dev->dev, "mbox3_boot: new boot length = %d\n", + dev_dbg(&dev->dev, "MBOX3: error usb_reset_configuration: %d\n", err); + + dev_dbg(&dev->dev, "MBOX3: new boot length = %d\n", le16_to_cpu(get_cfg_desc(config)->wTotalLength)); - mbox3_setup_48_24_magic(dev); - dev_info(&dev->dev, "Digidesign Mbox 3: 24bit 48kHz"); + mbox3_setup_defaults(dev); + dev_info(&dev->dev, "MBOX3: Initialized."); return 0; /* Successful boot */ } @@ -1734,6 +1731,46 @@ static int pioneer_djm_set_format_quirk(struct snd_usb_substream *subs, return 0; } +static void mbox3_set_format_quirk(struct snd_usb_substream *subs, + const struct audioformat *fmt) +{ + __le32 buff4 = 0; + u8 buff1 = 0x01; + u32 new_rate = subs->data_endpoint->cur_rate; + u32 current_rate; + + // Get current rate from card and check if changing it is needed + snd_usb_ctl_msg(subs->dev, usb_rcvctrlpipe(subs->dev, 0), + 0x01, 0x21 | USB_DIR_IN, 0x0100, 0x8101, &buff4, 4); + current_rate = le32_to_cpu(buff4); + dev_dbg(&subs->dev->dev, + "MBOX3: Current configured sample rate: %d", current_rate); + if (current_rate == new_rate) { + dev_dbg(&subs->dev->dev, + "MBOX3: No change needed (current rate:%d == new rate:%d)", + current_rate, new_rate); + return; + } + + // Set new rate + dev_info(&subs->dev->dev, + "MBOX3: Changing sample rate to: %d", new_rate); + buff4 = cpu_to_le32(new_rate); + snd_usb_ctl_msg(subs->dev, usb_sndctrlpipe(subs->dev, 0), + 0x01, 0x21, 0x0100, 0x8101, &buff4, 4); + + // Set clock source to Internal + snd_usb_ctl_msg(subs->dev, usb_sndctrlpipe(subs->dev, 0), + 0x01, 0x21, 0x0100, 0x8001, &buff1, 1); + + // Check whether the change was successful + buff4 = 0; + snd_usb_ctl_msg(subs->dev, usb_rcvctrlpipe(subs->dev, 0), + 0x01, 0x21 | USB_DIR_IN, 0x0100, 0x8101, &buff4, 4); + if (new_rate != le32_to_cpu(buff4)) + dev_warn(&subs->dev->dev, "MBOX3: Couldn't set the sample rate"); +} + void snd_usb_set_format_quirk(struct snd_usb_substream *subs, const struct audioformat *fmt) { @@ -1755,6 +1792,9 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs, case USB_ID(0x08e4, 0x0163): /* Pioneer DJM-850 */ pioneer_djm_set_format_quirk(subs, 0x0086); break; + case USB_ID(0x0dba, 0x5000): + mbox3_set_format_quirk(subs, fmt); /* Digidesign Mbox 3 */ + break; } } @@ -2085,6 +2125,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_CTL_MSG_DELAY_1M), DEVICE_FLG(0x0b0e, 0x0349, /* Jabra 550a */ QUIRK_FLAG_CTL_MSG_DELAY_1M), + DEVICE_FLG(0x0c45, 0x6340, /* Sonix HD USB Camera */ + QUIRK_FLAG_GET_SAMPLE_RATE), DEVICE_FLG(0x0ecb, 0x205c, /* JBL Quantum610 Wireless */ QUIRK_FLAG_FIXED_RATE), DEVICE_FLG(0x0ecb, 0x2069, /* JBL Quantum810 Wireless */ @@ -2127,6 +2169,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_GET_SAMPLE_RATE), DEVICE_FLG(0x19f7, 0x0035, /* RODE NT-USB+ */ QUIRK_FLAG_GET_SAMPLE_RATE), + DEVICE_FLG(0x1bcf, 0x2281, /* HD Webcam */ + QUIRK_FLAG_GET_SAMPLE_RATE), DEVICE_FLG(0x1bcf, 0x2283, /* NexiGo N930AF FHD Webcam */ QUIRK_FLAG_GET_SAMPLE_RATE), DEVICE_FLG(0x2040, 0x7200, /* Hauppauge HVR-950Q */ |