9 files changed, 681 insertions, 0 deletions

diff --git a/tools/power/cpupower/man/cpupower-frequency-info.1 b/tools/power/cpupower/man/cpupower-frequency-info.1
new file mode 100644
index 0000000000..dd545b4994
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-frequency-info.1
@@ -0,0 +1,80 @@
+.TH "CPUPOWER\-FREQUENCY\-INFO" "1" "0.1" "" "cpupower Manual"
+.SH "NAME"
+.LP 
+cpupower\-frequency\-info \- Utility to retrieve cpufreq kernel information
+.SH "SYNTAX"
+.LP 
+cpupower [ \-c cpulist ] frequency\-info [\fIoptions\fP]
+.SH "DESCRIPTION"
+.LP 
+A small tool which prints out cpufreq information helpful to developers and interested users.
+.SH "OPTIONS"
+.LP 
+.TP  
+\fB\-e\fR \fB\-\-debug\fR
+Prints out debug information.
+.TP  
+\fB\-f\fR \fB\-\-freq\fR
+Get frequency the CPU currently runs at, according to the cpufreq core.
+.TP  
+\fB\-w\fR \fB\-\-hwfreq\fR
+Get frequency the CPU currently runs at, by reading it from hardware (only available to root).
+.TP  
+\fB\-l\fR \fB\-\-hwlimits\fR
+Determine the minimum and maximum CPU frequency allowed.
+.TP  
+\fB\-d\fR \fB\-\-driver\fR
+Determines the used cpufreq kernel driver.
+.TP  
+\fB\-p\fR \fB\-\-policy\fR
+Gets the currently used cpufreq policy.
+.TP  
+\fB\-g\fR \fB\-\-governors\fR
+Determines available cpufreq governors.
+.TP  
+\fB\-a\fR \fB\-\-related\-cpus\fR
+Determines which CPUs run at the same hardware frequency.
+.TP  
+\fB\-a\fR \fB\-\-affected\-cpus\fR
+Determines which CPUs need to have their frequency coordinated by software.
+.TP  
+\fB\-s\fR \fB\-\-stats\fR
+Shows cpufreq statistics if available.
+.TP  
+\fB\-y\fR \fB\-\-latency\fR
+Determines the maximum latency on CPU frequency changes.
+.TP  
+\fB\-o\fR \fB\-\-proc\fR
+Prints out information like provided by the /proc/cpufreq interface in 2.4. and early 2.6. kernels.
+.TP  
+\fB\-m\fR \fB\-\-human\fR
+human\-readable output for the \-f, \-w, \-s and \-y parameters.
+.TP  
+\fB\-n\fR \fB\-\-no-rounding\fR
+Output frequencies and latencies without rounding off values.
+.TP  
+\fB\-c\fR \fB\-\-perf\fR
+Get performances and frequencies capabilities of CPPC, by reading it from hardware (only available on the hardware with CPPC).
+.TP
+.SH "REMARKS"
+.LP 
+By default only values of core zero are displayed. How to display settings of
+other cores is described in the cpupower(1) manpage in the \-\-cpu option section.
+.LP 
+You can't specify more than one of the output specific options \-o \-e \-a \-g \-p \-d \-l \-w \-f \-y.
+.LP 
+You also can't specify the \-o option combined with the \-c option.
+.SH "FILES"
+.nf 
+\fI/sys/devices/system/cpu/cpu*/cpufreq/\fP  
+\fI/proc/cpufreq\fP (deprecated) 
+\fI/proc/sys/cpu/\fP (deprecated)
+.fi 
+.SH "AUTHORS"
+.nf
+Dominik Brodowski <linux@brodo.de> \- author 
+Mattia Dongili<malattia@gmail.com> \- first autolibtoolization
+.fi
+.SH "SEE ALSO"
+.LP 
+cpupower\-frequency\-set(1), cpupower(1)
diff --git a/tools/power/cpupower/man/cpupower-frequency-set.1 b/tools/power/cpupower/man/cpupower-frequency-set.1
new file mode 100644
index 0000000000..b50570221a
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-frequency-set.1
@@ -0,0 +1,52 @@
+.TH "CPUPOWER\-FREQUENCY\-SET" "1" "0.1" "" "cpupower Manual"
+.SH "NAME"
+.LP 
+cpupower\-frequency\-set \- A small tool which allows to modify cpufreq settings.
+.SH "SYNTAX"
+.LP 
+cpupower [ \-c cpu ] frequency\-set [\fIoptions\fP]
+.SH "DESCRIPTION"
+.LP 
+cpupower frequency\-set allows you to modify cpufreq settings without having to type e.g. "/sys/devices/system/cpu/cpu0/cpufreq/scaling_set_speed" all the time.
+.SH "OPTIONS"
+.LP 
+.TP 
+\fB\-d\fR \fB\-\-min\fR <FREQ>
+new minimum CPU frequency the governor may select.
+.TP 
+\fB\-u\fR \fB\-\-max\fR <FREQ>
+new maximum CPU frequency the governor may select.
+.TP 
+\fB\-g\fR \fB\-\-governor\fR <GOV>
+new cpufreq governor.
+.TP 
+\fB\-f\fR \fB\-\-freq\fR <FREQ>
+specific frequency to be set. Requires userspace governor to be available and loaded.
+.TP 
+\fB\-r\fR \fB\-\-related\fR
+modify all hardware-related CPUs at the same time
+.TP 
+.SH "REMARKS"
+.LP 
+By default values are applied on all cores. How to modify single core
+configurations is described in the cpupower(1) manpage in the \-\-cpu option section.
+.LP 
+The \-f FREQ, \-\-freq FREQ parameter cannot be combined with any other parameter.
+.LP 
+FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz by postfixing the value with the wanted unit name, without any space (frequency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).
+.LP 
+On Linux kernels up to 2.6.29, the \-r or \-\-related parameter is ignored.
+.SH "FILES" 
+.nf
+\fI/sys/devices/system/cpu/cpu*/cpufreq/\fP  
+\fI/proc/cpufreq\fP (deprecated) 
+\fI/proc/sys/cpu/\fP (deprecated)
+.fi 
+.SH "AUTHORS"
+.nf 
+Dominik Brodowski <linux@brodo.de> \- author 
+Mattia Dongili<malattia@gmail.com> \- first autolibtoolization
+.fi
+.SH "SEE ALSO"
+.LP 
+cpupower\-frequency\-info(1), cpupower(1)
diff --git a/tools/power/cpupower/man/cpupower-idle-info.1 b/tools/power/cpupower/man/cpupower-idle-info.1
new file mode 100644
index 0000000000..20b6345c53
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-idle-info.1
@@ -0,0 +1,91 @@
+.TH "CPUPOWER-IDLE-INFO" "1" "0.1" "" "cpupower Manual"
+.SH "NAME"
+.LP
+cpupower\-idle\-info \- Utility to retrieve cpu idle kernel information
+.SH "SYNTAX"
+.LP
+cpupower [ \-c cpulist ] idle\-info [\fIoptions\fP]
+.SH "DESCRIPTION"
+.LP
+A tool which prints out per cpu idle information helpful to developers and interested users.
+.SH "OPTIONS"
+.LP
+.TP
+\fB\-f\fR \fB\-\-silent\fR
+Only print a summary of all available C-states in the system.
+.TP
+\fB\-e\fR \fB\-\-proc\fR
+deprecated.
+Prints out idle information in old /proc/acpi/processor/*/power format. This
+interface has been removed from the kernel for quite some time, do not let
+further code depend on this option, best do not use it.
+
+.SH IDLE\-INFO DESCRIPTIONS
+CPU sleep state statistics and descriptions are retrieved from sysfs files,
+exported by the cpuidle kernel subsystem. The kernel only updates these
+statistics when it enters or leaves an idle state, therefore on a very idle or
+a very busy system, these statistics may not be accurate. They still provide a
+good overview about the usage and availability of processor sleep states on
+the platform.
+
+Be aware that the sleep states as exported by the hardware or BIOS and used by
+the Linux kernel may not exactly reflect the capabilities of the
+processor. This often is the case on the X86 architecture when the acpi_idle
+driver is used. It is also possible that the hardware overrules the kernel
+requests, due to internal activity monitors or other reasons.
+On recent X86 platforms it is often possible to read out hardware registers
+which monitor the duration of sleep states the processor resided in. The
+cpupower monitor tool (cpupower\-monitor(1)) can be used to show real sleep
+state residencies. Please refer to the architecture specific description
+section below.
+
+.SH IDLE\-INFO ARCHITECTURE SPECIFIC DESCRIPTIONS
+.SS "X86"
+POLL idle state
+
+If cpuidle is active, X86 platforms have one special idle state.
+The POLL idle state is not a real idle state, it does not save any
+power. Instead, a busy\-loop is executed doing nothing for a short period of
+time. This state is used if the kernel knows that work has to be processed
+very soon and entering any real hardware idle state may result in a slight
+performance penalty.
+
+There exist two different cpuidle drivers on the X86 architecture platform:
+
+"acpi_idle" cpuidle driver
+
+The acpi_idle cpuidle driver retrieves available sleep states (C\-states) from
+the ACPI BIOS tables (from the _CST ACPI function on recent platforms or from
+the FADT BIOS table on older ones).
+The C1 state is not retrieved from ACPI tables. If the C1 state is entered,
+the kernel will call the hlt instruction (or mwait on Intel).
+
+"intel_idle" cpuidle driver
+
+In kernel 2.6.36 the intel_idle driver was introduced.
+It only serves recent Intel CPUs (Nehalem, Westmere, Sandybridge, Atoms or
+newer). On older Intel CPUs the acpi_idle driver is still used (if the BIOS
+provides C\-state ACPI tables).
+The intel_idle driver knows the sleep state capabilities of the processor and
+ignores ACPI BIOS exported processor sleep states tables.
+
+.SH "REMARKS"
+.LP
+By default only values of core zero are displayed. How to display settings of
+other cores is described in the cpupower(1) manpage in the \-\-cpu option
+section.
+.SH REFERENCES
+https://uefi.org/specifications
+.SH "FILES"
+.nf
+\fI/sys/devices/system/cpu/cpu*/cpuidle/state*\fP
+\fI/sys/devices/system/cpu/cpuidle/*\fP
+.fi
+.SH "AUTHORS"
+.nf
+Thomas Renninger <trenn@suse.de>
+.fi
+.SH "SEE ALSO"
+.LP
+cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1),
+cpupower\-idle\-set(1)
diff --git a/tools/power/cpupower/man/cpupower-idle-set.1 b/tools/power/cpupower/man/cpupower-idle-set.1
new file mode 100644
index 0000000000..8cef3c71e1
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-idle-set.1
@@ -0,0 +1,79 @@
+.TH "CPUPOWER-IDLE-SET" "1" "0.1" "" "cpupower Manual"
+.SH "NAME"
+.LP
+cpupower\-idle\-set \- Utility to set cpu idle state specific kernel options
+.SH "SYNTAX"
+.LP
+cpupower [ \-c cpulist ] idle\-set [\fIoptions\fP]
+.SH "DESCRIPTION"
+.LP
+The cpupower idle\-set subcommand allows to set cpu idle, also called cpu
+sleep state, specific options offered by the kernel. One example is disabling
+sleep states. This can be handy for power vs performance tuning.
+.SH "OPTIONS"
+.LP
+.TP
+\fB\-d\fR \fB\-\-disable\fR <STATE_NO>
+Disable a specific processor sleep state.
+.TP
+\fB\-e\fR \fB\-\-enable\fR <STATE_NO>
+Enable a specific processor sleep state.
+.TP
+\fB\-D\fR \fB\-\-disable-by-latency\fR <LATENCY>
+Disable all idle states with a equal or higher latency than <LATENCY>.
+
+Enable all idle states with a latency lower than <LATENCY>.
+.TP
+\fB\-E\fR \fB\-\-enable-all\fR
+Enable all idle states if not enabled already.
+
+.SH "REMARKS"
+.LP
+Cpuidle Governors Policy on Disabling Sleep States
+
+.RS 4
+Depending on the used  cpuidle governor, implementing the kernel policy
+how to choose sleep states, subsequent sleep states on this core, might get
+disabled as well.
+
+There are two cpuidle governors ladder and menu. While the ladder
+governor is always available, if CONFIG_CPU_IDLE is selected, the
+menu governor additionally requires CONFIG_NO_HZ.
+
+The behavior and the effect of the disable variable depends on the
+implementation of a particular governor. In the ladder governor, for
+example, it is not coherent, i.e. if one is disabling a light state,
+then all deeper states are disabled as well. Likewise, if one enables a
+deep state but a lighter state still is disabled, then this has no effect.
+.RE
+.LP
+Disabling the Lightest Sleep State may not have any Affect
+
+.RS 4
+If criteria are not met to enter deeper sleep states and the lightest sleep
+state is chosen when idle, the kernel may still enter this sleep state,
+irrespective of whether it is disabled or not. This is also reflected in
+the usage count of the disabled sleep state when using the cpupower idle-info
+command.
+.RE
+.LP
+Selecting specific CPU Cores
+
+.RS 4
+By default processor sleep states of all CPU cores are set. Please refer
+to the cpupower(1) manpage in the \-\-cpu option section how to disable
+C-states of specific cores.
+.RE
+.SH "FILES"
+.nf
+\fI/sys/devices/system/cpu/cpu*/cpuidle/state*\fP
+\fI/sys/devices/system/cpu/cpuidle/*\fP
+.fi
+.SH "AUTHORS"
+.nf
+Thomas Renninger <trenn@suse.de>
+.fi
+.SH "SEE ALSO"
+.LP
+cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1),
+cpupower\-idle\-info(1)
diff --git a/tools/power/cpupower/man/cpupower-info.1 b/tools/power/cpupower/man/cpupower-info.1
new file mode 100644
index 0000000000..340bcd0be7
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-info.1
@@ -0,0 +1,19 @@
+.TH CPUPOWER\-INFO "1" "22/02/2011" "" "cpupower Manual"
+.SH NAME
+cpupower\-info \- Shows processor power related kernel or hardware configurations
+.SH SYNOPSIS
+.ft B
+.B cpupower info [ \-b ]
+
+.SH DESCRIPTION
+\fBcpupower info \fP shows kernel configurations or processor hardware
+registers affecting processor power saving policies.
+
+Some options are platform wide, some affect single cores. By default values
+of core zero are displayed only. cpupower --cpu all cpuinfo will show the
+settings of all cores, see cpupower(1) how to choose specific cores.
+
+.SH "SEE ALSO"
+Options are described in detail in:
+
+cpupower(1), cpupower-set(1)
diff --git a/tools/power/cpupower/man/cpupower-monitor.1 b/tools/power/cpupower/man/cpupower-monitor.1
new file mode 100644
index 0000000000..8ee737eefa
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-monitor.1
@@ -0,0 +1,198 @@
+.TH CPUPOWER\-MONITOR "1" "22/02/2011" "" "cpupower Manual"
+.SH NAME
+cpupower\-monitor \- Report processor frequency and idle statistics
+.SH SYNOPSIS
+.ft B
+.B cpupower monitor
+.RB "\-l"
+
+.B cpupower monitor
+.RB [ -c ] [ "\-m <mon1>," [ "<mon2>,..." ] ]
+.RB [ "\-i seconds" ]
+.br
+.B cpupower monitor
+.RB [ -c ][ "\-m <mon1>," [ "<mon2>,..." ] ]
+.RB command
+.br
+.SH DESCRIPTION
+\fBcpupower-monitor \fP reports processor topology, frequency and idle power
+state statistics. Either \fBcommand\fP is forked and
+statistics are printed upon its completion, or statistics are printed periodically.
+
+\fBcpupower-monitor \fP implements independent processor sleep state and
+frequency counters. Some are retrieved from kernel statistics, some are
+directly reading out hardware registers. Use \-l to get an overview which are
+supported on your system.
+
+.SH Options
+.PP
+\-l
+.RS 4
+List available monitors on your system. Additional details about each monitor
+are shown:
+.RS 2
+.IP \(bu
+The name in quotation marks which can be passed to the \-m parameter.
+.IP \(bu
+The number of different counters the monitor supports in brackets.
+.IP \(bu
+The amount of time in seconds the counters might overflow, due to
+implementation constraints.
+.IP \(bu
+The name and a description of each counter and its processor hierarchy level
+coverage in square brackets:
+.RS 4
+.IP \(bu
+[T] \-> Thread
+.IP \(bu
+[C] \-> Core
+.IP \(bu
+[P] \-> Processor Package (Socket)
+.IP \(bu
+[M] \-> Machine/Platform wide counter
+.RE
+.RE
+.RE
+.PP
+\-m <mon1>,<mon2>,...
+.RS 4
+Only display specific monitors. Use the monitor string(s) provided by \-l option.
+.RE
+.PP
+\-i seconds
+.RS 4
+Measure interval.
+.RE
+.PP
+\-c
+.RS 4
+Schedule the process on every core before starting and ending measuring.
+This could be needed for the Idle_Stats monitor when no other MSR based
+monitor (has to be run on the core that is measured) is run in parallel.
+This is to wake up the processors from deeper sleep states and let the
+kernel re
+-account its cpuidle (C-state) information before reading the
+cpuidle timings from sysfs.
+.RE
+.PP
+command
+.RS 4
+Measure idle and frequency characteristics of an arbitrary command/workload.
+The executable \fBcommand\fP is forked and upon its exit, statistics gathered since it was
+forked are displayed.
+.RE
+.PP
+\-v
+.RS 4
+Increase verbosity if the binary was compiled with the DEBUG option set.
+.RE
+
+.SH MONITOR DESCRIPTIONS
+.SS "Idle_Stats"
+Shows statistics of the cpuidle kernel subsystem. Values are retrieved from
+/sys/devices/system/cpu/cpu*/cpuidle/state*/.
+The kernel updates these values every time an idle state is entered or
+left. Therefore there can be some inaccuracy when cores are in an idle
+state for some time when the measure starts or ends. In worst case it can happen
+that one core stayed in an idle state for the whole measure time and the idle
+state usage time as exported by the kernel did not get updated. In this case
+a state residency of 0 percent is shown while it was 100.
+
+.SS "Mperf"
+The name comes from the aperf/mperf (average and maximum) MSR registers used
+which are available on recent X86 processors. It shows the average frequency
+(including boost frequencies).
+The fact that on all recent hardware the mperf timer stops ticking in any idle
+state it is also used to show C0 (processor is active) and Cx (processor is in
+any sleep state) times. These counters do not have the inaccuracy restrictions
+the "Idle_Stats" counters may show.
+May work poorly on Linux-2.6.20 through 2.6.29, as the \fBacpi-cpufreq \fP
+kernel frequency driver periodically cleared aperf/mperf registers in those
+kernels.
+
+.SS "Nehalem" "SandyBridge" "HaswellExtended"
+Intel Core and Package sleep state counters.
+Threads (hyperthreaded cores) may not be able to enter deeper core states if
+its sibling is utilized.
+Deepest package sleep states may in reality show up as machine/platform wide
+sleep states and can only be entered if all cores are idle. Look up Intel
+manuals (some are provided in the References section) for further details.
+The monitors are named after the CPU family where the sleep state capabilities
+got introduced and may not match exactly the CPU name of the platform.
+For example an IvyBridge processor has sleep state capabilities which got
+introduced in Nehalem and SandyBridge processor families.
+Thus on an IvyBridge processor one will get Nehalem and SandyBridge sleep
+state monitors.
+HaswellExtended extra package sleep state capabilities are available only in a
+specific Haswell (family 0x45) and probably also other future processors.
+
+.SS "Fam_12h" "Fam_14h"
+AMD laptop and desktop processor (family 12h and 14h) sleep state counters.
+The registers are accessed via PCI and therefore can still be read out while
+cores have been offlined.
+
+There is one special counter: NBP1 (North Bridge P1).
+This one always returns 0 or 1, depending on whether the North Bridge P1
+power state got entered at least once during measure time.
+Being able to enter NBP1 state also depends on graphics power management.
+Therefore this counter can be used to verify whether the graphics' driver
+power management is working as expected.
+
+.SH EXAMPLES
+
+cpupower monitor -l" may show:
+.RS 4
+Monitor "Mperf" (3 states) \- Might overflow after 922000000 s
+
+   ...
+
+Monitor "Idle_Stats" (3 states) \- Might overflow after 4294967295 s
+
+   ...
+
+.RE
+cpupower monitor \-m "Idle_Stats,Mperf" scp /tmp/test /nfs/tmp
+
+Monitor the scp command, show both Mperf and Idle_Stats states counter
+statistics, but in exchanged order.
+
+
+
+.RE
+Be careful that the typical command to fully utilize one CPU by doing:
+
+cpupower monitor cat /dev/zero >/dev/null
+
+Does not work as expected, because the measured output is redirected to
+/dev/null. This could get workarounded by putting the line into an own, tiny
+shell script. Hit CTRL\-c to terminate the command and get the measure output
+displayed.
+
+.SH REFERENCES
+"BIOS and Kernel Developer’s Guide (BKDG) for AMD Family 14h Processors"
+https://support.amd.com/us/Processor_TechDocs/43170.pdf
+
+"Intel® Turbo Boost Technology
+in Intel® Core™ Microarchitecture (Nehalem) Based Processors"
+http://download.intel.com/design/processor/applnots/320354.pdf
+
+"Intel® 64 and IA-32 Architectures Software Developer's Manual
+Volume 3B: System Programming Guide"
+https://www.intel.com/products/processor/manuals
+
+.SH FILES
+.ta
+.nf
+/dev/cpu/*/msr
+/sys/devices/system/cpu/cpu*/cpuidle/state*/.
+.fi
+
+.SH "SEE ALSO"
+powertop(8), msr(4), vmstat(8)
+.PP
+.SH AUTHORS
+.nf
+Written by Thomas Renninger <trenn@suse.de>
+
+Nehalem, SandyBridge monitors and command passing
+based on turbostat.8 from Len Brown <len.brown@intel.com>
diff --git a/tools/power/cpupower/man/cpupower-powercap-info.1 b/tools/power/cpupower/man/cpupower-powercap-info.1
new file mode 100644
index 0000000000..145d6f06fa
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-powercap-info.1
@@ -0,0 +1,25 @@
+.TH CPUPOWER\-POWERCAP\-INFO "1" "05/08/2016" "" "cpupower Manual"
+.SH NAME
+cpupower\-powercap\-info \- Shows powercapping related kernel and hardware configurations
+.SH SYNOPSIS
+.ft B
+.B cpupower powercap-info
+
+.SH DESCRIPTION
+\fBcpupower powercap-info \fP shows kernel powercapping subsystem information.
+This needs hardware support and a loaded powercapping driver (at this time only
+intel_rapl driver exits) exporting hardware values userspace via sysfs.
+
+Some options are platform wide, some affect single cores. By default values
+of core zero are displayed only. cpupower --cpu all cpuinfo will show the
+settings of all cores, see cpupower(1) how to choose specific cores.
+
+.SH "DOCUMENTATION"
+
+kernel sources:
+Documentation/power/powercap/powercap.rst
+
+
+.SH "SEE ALSO"
+
+cpupower(1)
diff --git a/tools/power/cpupower/man/cpupower-set.1 b/tools/power/cpupower/man/cpupower-set.1
new file mode 100644
index 0000000000..2bcc696f44
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-set.1
@@ -0,0 +1,65 @@
+.TH CPUPOWER\-SET "1" "22/02/2011" "" "cpupower Manual"
+.SH NAME
+cpupower\-set \- Set processor power related kernel or hardware configurations
+.SH SYNOPSIS
+.ft B
+.B cpupower set [ \-b VAL ]
+
+
+.SH DESCRIPTION
+\fBcpupower set \fP sets kernel configurations or directly accesses hardware
+registers affecting processor power saving policies.
+
+Some options are platform wide, some affect single cores. By default values
+are applied on all cores. How to modify single core configurations is
+described in the cpupower(1) manpage in the \-\-cpu option section. Whether an
+option affects the whole system or can be applied to individual cores is
+described in the Options sections.
+
+Use \fBcpupower info \fP to read out current settings and whether they are
+supported on the system at all.
+
+.SH Options
+.PP
+\-\-perf-bias, \-b
+.RS 4
+Sets a register on supported Intel processore which allows software to convey
+its policy for the relative importance of performance versus energy savings to
+the  processor.
+
+The range of valid numbers is 0-15, where 0 is maximum
+performance and 15 is maximum energy efficiency.
+
+The processor uses this information in model-specific ways
+when it must select trade-offs between performance and
+energy efficiency.
+
+This policy hint does not supersede Processor Performance states
+(P-states) or CPU Idle power states (C-states), but allows
+software to have influence where it would otherwise be unable
+to express a preference.
+
+For example, this setting may tell the hardware how
+aggressively or conservatively to control frequency
+in the "turbo range" above the explicitly OS-controlled
+P-state frequency range.  It may also tell the hardware
+how aggressively it should enter the OS requested C-states.
+
+This option can be applied to individual cores only via the \-\-cpu option,
+cpupower(1).
+
+Setting the performance bias value on one CPU can modify the setting on
+related CPUs as well (for example all CPUs on one socket), because of
+hardware restrictions.
+Use \fBcpupower -c all info -b\fP to verify.
+
+This options needs the msr kernel driver (CONFIG_X86_MSR) loaded.
+.RE
+
+.SH "SEE ALSO"
+cpupower-info(1), cpupower-monitor(1), powertop(1)
+.PP
+.SH AUTHORS
+.nf
+\-\-perf\-bias parts written by Len Brown <len.brown@intel.com>
+Thomas Renninger <trenn@suse.de>
diff --git a/tools/power/cpupower/man/cpupower.1 b/tools/power/cpupower/man/cpupower.1
new file mode 100644
index 0000000000..a5e4523a21
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower.1
@@ -0,0 +1,72 @@
+.TH CPUPOWER "1" "07/03/2011" "" "cpupower Manual"
+.SH NAME
+cpupower \- Shows and sets processor power related values
+.SH SYNOPSIS
+.ft B
+.B cpupower [ \-c cpulist ] <command> [ARGS]
+
+.B cpupower \-v|\-\-version
+
+.B cpupower \-h|\-\-help
+
+.SH DESCRIPTION
+\fBcpupower \fP is a collection of tools to examine and tune power saving
+related features of your processor.
+
+The manpages of the commands (cpupower\-<command>(1)) provide detailed
+descriptions of supported features. Run \fBcpupower help\fP to get an overview
+of supported commands.
+
+.SH Options
+.PP
+\-\-help, \-h
+.RS 4
+Shows supported commands and general usage.
+.RE
+.PP
+\-\-cpu cpulist,  \-c cpulist
+.RS 4
+Only show or set values for specific cores.
+This option is not supported by all commands, details can be found in the
+manpages of the commands.
+
+Some commands access all cores (typically the *\-set commands), some only
+the first core (typically the *\-info commands) by default.
+
+The syntax for <cpulist> is based on how the kernel exports CPU bitmasks via
+sysfs files. Some examples:
+.RS 4
+.TP 16
+Input
+Equivalent to
+.TP
+all
+all cores
+.TP
+0\-3
+0,1,2,3
+.TP
+0\-7:2
+0,2,4,6
+.TP
+1,3,5-7
+1,3,5,6,7
+.TP
+0\-3:2,8\-15:4
+0,2,8,12	
+.RE
+.RE
+.PP
+\-\-version,  \-v
+.RS 4
+Print the package name and version number.
+
+.SH "SEE ALSO"
+cpupower-set(1), cpupower-info(1), cpupower-idle-info(1),
+cpupower-idle-set(1), cpupower-frequency-set(1), cpupower-frequency-info(1),
+cpupower-monitor(1), powertop(1)
+.PP
+.SH AUTHORS
+.nf
+\-\-perf\-bias parts written by Len Brown <len.brown@intel.com>
+Thomas Renninger <trenn@suse.de>