diff options
Diffstat (limited to 'tools/testing/selftests/drivers')
160 files changed, 29244 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/.gitignore b/tools/testing/selftests/drivers/.gitignore new file mode 100644 index 0000000000..09e23b5afa --- /dev/null +++ b/tools/testing/selftests/drivers/.gitignore @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +/dma-buf/udmabuf +/s390x/uvdevice/test_uvdevice diff --git a/tools/testing/selftests/drivers/dma-buf/Makefile b/tools/testing/selftests/drivers/dma-buf/Makefile new file mode 100644 index 0000000000..441407bb0e --- /dev/null +++ b/tools/testing/selftests/drivers/dma-buf/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0-only +CFLAGS += $(KHDR_INCLUDES) + +TEST_GEN_PROGS := udmabuf + +top_srcdir ?=../../../../.. + +include ../../lib.mk diff --git a/tools/testing/selftests/drivers/dma-buf/config b/tools/testing/selftests/drivers/dma-buf/config new file mode 100644 index 0000000000..d708515cff --- /dev/null +++ b/tools/testing/selftests/drivers/dma-buf/config @@ -0,0 +1 @@ +CONFIG_UDMABUF=y diff --git a/tools/testing/selftests/drivers/dma-buf/udmabuf.c b/tools/testing/selftests/drivers/dma-buf/udmabuf.c new file mode 100644 index 0000000000..c812080e30 --- /dev/null +++ b/tools/testing/selftests/drivers/dma-buf/udmabuf.c @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: GPL-2.0 +#define _GNU_SOURCE +#define __EXPORTED_HEADERS__ + +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <string.h> +#include <errno.h> +#include <fcntl.h> +#include <malloc.h> + +#include <sys/ioctl.h> +#include <sys/syscall.h> +#include <linux/memfd.h> +#include <linux/udmabuf.h> + +#define TEST_PREFIX "drivers/dma-buf/udmabuf" +#define NUM_PAGES 4 + +static int memfd_create(const char *name, unsigned int flags) +{ + return syscall(__NR_memfd_create, name, flags); +} + +int main(int argc, char *argv[]) +{ + struct udmabuf_create create; + int devfd, memfd, buf, ret; + off_t size; + void *mem; + + devfd = open("/dev/udmabuf", O_RDWR); + if (devfd < 0) { + printf("%s: [skip,no-udmabuf: Unable to access DMA buffer device file]\n", + TEST_PREFIX); + exit(77); + } + + memfd = memfd_create("udmabuf-test", MFD_ALLOW_SEALING); + if (memfd < 0) { + printf("%s: [skip,no-memfd]\n", TEST_PREFIX); + exit(77); + } + + ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK); + if (ret < 0) { + printf("%s: [skip,fcntl-add-seals]\n", TEST_PREFIX); + exit(77); + } + + + size = getpagesize() * NUM_PAGES; + ret = ftruncate(memfd, size); + if (ret == -1) { + printf("%s: [FAIL,memfd-truncate]\n", TEST_PREFIX); + exit(1); + } + + memset(&create, 0, sizeof(create)); + + /* should fail (offset not page aligned) */ + create.memfd = memfd; + create.offset = getpagesize()/2; + create.size = getpagesize(); + buf = ioctl(devfd, UDMABUF_CREATE, &create); + if (buf >= 0) { + printf("%s: [FAIL,test-1]\n", TEST_PREFIX); + exit(1); + } + + /* should fail (size not multiple of page) */ + create.memfd = memfd; + create.offset = 0; + create.size = getpagesize()/2; + buf = ioctl(devfd, UDMABUF_CREATE, &create); + if (buf >= 0) { + printf("%s: [FAIL,test-2]\n", TEST_PREFIX); + exit(1); + } + + /* should fail (not memfd) */ + create.memfd = 0; /* stdin */ + create.offset = 0; + create.size = size; + buf = ioctl(devfd, UDMABUF_CREATE, &create); + if (buf >= 0) { + printf("%s: [FAIL,test-3]\n", TEST_PREFIX); + exit(1); + } + + /* should work */ + create.memfd = memfd; + create.offset = 0; + create.size = size; + buf = ioctl(devfd, UDMABUF_CREATE, &create); + if (buf < 0) { + printf("%s: [FAIL,test-4]\n", TEST_PREFIX); + exit(1); + } + + fprintf(stderr, "%s: ok\n", TEST_PREFIX); + close(buf); + close(memfd); + close(devfd); + return 0; +} diff --git a/tools/testing/selftests/drivers/gpu/drm_mm.sh b/tools/testing/selftests/drivers/gpu/drm_mm.sh new file mode 100755 index 0000000000..09c76cd766 --- /dev/null +++ b/tools/testing/selftests/drivers/gpu/drm_mm.sh @@ -0,0 +1,16 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# Runs API tests for struct drm_mm (DRM range manager) + +if ! /sbin/modprobe -n -q test-drm_mm; then + echo "drivers/gpu/drm_mm: module test-drm_mm is not found in /lib/modules/`uname -r` [skip]" + exit 77 +fi + +if /sbin/modprobe -q test-drm_mm; then + /sbin/modprobe -q -r test-drm_mm + echo "drivers/gpu/drm_mm: ok" +else + echo "drivers/gpu/drm_mm: module test-drm_mm could not be removed [FAIL]" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/gpu/i915.sh b/tools/testing/selftests/drivers/gpu/i915.sh new file mode 100755 index 0000000000..d3895bc714 --- /dev/null +++ b/tools/testing/selftests/drivers/gpu/i915.sh @@ -0,0 +1,16 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# Runs hardware independent tests for i915 (drivers/gpu/drm/i915) + +if ! /sbin/modprobe -q -r i915; then + echo "drivers/gpu/i915: [SKIP]" + exit 77 +fi + +if /sbin/modprobe -q i915 mock_selftests=-1; then + /sbin/modprobe -q -r i915 + echo "drivers/gpu/i915: ok" +else + echo "drivers/gpu/i915: [FAIL]" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile new file mode 100644 index 0000000000..8a72bb7de7 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/Makefile @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +# Makefile for net selftests + +TEST_PROGS := \ + bond-arp-interval-causes-panic.sh \ + bond-break-lacpdu-tx.sh \ + bond-lladdr-target.sh \ + dev_addr_lists.sh \ + mode-1-recovery-updelay.sh \ + mode-2-recovery-updelay.sh \ + bond_options.sh \ + bond-eth-type-change.sh \ + bond_macvlan.sh + +TEST_FILES := \ + lag_lib.sh \ + bond_topo_2d1c.sh \ + bond_topo_3d1c.sh \ + net_forwarding_lib.sh + +include ../../../lib.mk diff --git a/tools/testing/selftests/drivers/net/bonding/bond-arp-interval-causes-panic.sh b/tools/testing/selftests/drivers/net/bonding/bond-arp-interval-causes-panic.sh new file mode 100755 index 0000000000..5667febee3 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond-arp-interval-causes-panic.sh @@ -0,0 +1,46 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# +# cause kernel oops in bond_rr_gen_slave_id +DEBUG=${DEBUG:-0} + +set -e +test ${DEBUG} -ne 0 && set -x + +finish() +{ + ip netns delete server || true + ip netns delete client || true +} + +trap finish EXIT + +client_ip4=192.168.1.198 +server_ip4=192.168.1.254 + +# setup kernel so it reboots after causing the panic +echo 180 >/proc/sys/kernel/panic + +# build namespaces +ip netns add "server" +ip netns add "client" +ip -n client link add eth0 type veth peer name eth0 netns server +ip netns exec server ip link set dev eth0 up +ip netns exec server ip addr add ${server_ip4}/24 dev eth0 + +ip netns exec client ip link add dev bond0 down type bond mode 1 \ + miimon 100 all_slaves_active 1 +ip netns exec client ip link set dev eth0 master bond0 +ip netns exec client ip link set dev bond0 up +ip netns exec client ip addr add ${client_ip4}/24 dev bond0 +ip netns exec client ping -c 5 $server_ip4 >/dev/null + +ip netns exec client ip link set dev eth0 nomaster +ip netns exec client ip link set dev bond0 down +ip netns exec client ip link set dev bond0 type bond mode 0 \ + arp_interval 1000 arp_ip_target "+${server_ip4}" +ip netns exec client ip link set dev eth0 master bond0 +ip netns exec client ip link set dev bond0 up +ip netns exec client ping -c 5 $server_ip4 >/dev/null + +exit 0 diff --git a/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh b/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh new file mode 100755 index 0000000000..6358df5752 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh @@ -0,0 +1,81 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 + +# Regression Test: +# Verify LACPDUs get transmitted after setting the MAC address of +# the bond. +# +# https://bugzilla.redhat.com/show_bug.cgi?id=2020773 +# +# +---------+ +# | fab-br0 | +# +---------+ +# | +# +---------+ +# | fbond | +# +---------+ +# | | +# +------+ +------+ +# |veth1 | |veth2 | +# +------+ +------+ +# +# We use veths instead of physical interfaces + +set -e +tmp=$(mktemp -q dump.XXXXXX) +cleanup() { + ip link del fab-br0 >/dev/null 2>&1 || : + ip link del fbond >/dev/null 2>&1 || : + ip link del veth1-bond >/dev/null 2>&1 || : + ip link del veth2-bond >/dev/null 2>&1 || : + modprobe -r bonding >/dev/null 2>&1 || : + rm -f -- ${tmp} +} + +trap cleanup 0 1 2 +cleanup +sleep 1 + +# create the bridge +ip link add fab-br0 address 52:54:00:3B:7C:A6 mtu 1500 type bridge \ + forward_delay 15 + +# create the bond +ip link add fbond type bond mode 4 miimon 200 xmit_hash_policy 1 \ + ad_actor_sys_prio 65535 lacp_rate fast + +# set bond address +ip link set fbond address 52:54:00:3B:7C:A6 +ip link set fbond up + +# set again bond sysfs parameters +ip link set fbond type bond ad_actor_sys_prio 65535 + +# create veths +ip link add name veth1-bond type veth peer name veth1-end +ip link add name veth2-bond type veth peer name veth2-end + +# add ports +ip link set fbond master fab-br0 +ip link set veth1-bond master fbond +ip link set veth2-bond master fbond + +# bring up +ip link set veth1-end up +ip link set veth2-end up +ip link set fab-br0 up +ip link set fbond up +ip addr add dev fab-br0 10.0.0.3 + +tcpdump -n -i veth1-end -e ether proto 0x8809 >${tmp} 2>&1 & +sleep 15 +pkill tcpdump >/dev/null 2>&1 +rc=0 +num=$(grep "packets captured" ${tmp} | awk '{print $1}') +if test "$num" -gt 0; then + echo "PASS, captured ${num}" +else + echo "FAIL" + rc=1 +fi +exit $rc diff --git a/tools/testing/selftests/drivers/net/bonding/bond-eth-type-change.sh b/tools/testing/selftests/drivers/net/bonding/bond-eth-type-change.sh new file mode 100755 index 0000000000..862e947e17 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond-eth-type-change.sh @@ -0,0 +1,84 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test bond device ether type changing +# + +ALL_TESTS=" + bond_test_unsuccessful_enslave_type_change + bond_test_successful_enslave_type_change +" +REQUIRE_MZ=no +NUM_NETIFS=0 +lib_dir=$(dirname "$0") +source "$lib_dir"/net_forwarding_lib.sh + +bond_check_flags() +{ + local bonddev=$1 + + ip -d l sh dev "$bonddev" | grep -q "MASTER" + check_err $? "MASTER flag is missing from the bond device" + + ip -d l sh dev "$bonddev" | grep -q "SLAVE" + check_err $? "SLAVE flag is missing from the bond device" +} + +# test enslaved bond dev type change from ARPHRD_ETHER and back +# this allows us to test both MASTER and SLAVE flags at once +bond_test_enslave_type_change() +{ + local test_success=$1 + local devbond0="test-bond0" + local devbond1="test-bond1" + local devbond2="test-bond2" + local nonethdev="test-noneth0" + + # create a non-ARPHRD_ETHER device for testing (e.g. nlmon type) + ip link add name "$nonethdev" type nlmon + check_err $? "could not create a non-ARPHRD_ETHER device (nlmon)" + ip link add name "$devbond0" type bond + if [ $test_success -eq 1 ]; then + # we need devbond0 in active-backup mode to successfully enslave nonethdev + ip link set dev "$devbond0" type bond mode active-backup + check_err $? "could not change bond mode to active-backup" + fi + ip link add name "$devbond1" type bond + ip link add name "$devbond2" type bond + ip link set dev "$devbond0" master "$devbond1" + check_err $? "could not enslave $devbond0 to $devbond1" + # change bond type to non-ARPHRD_ETHER + ip link set dev "$nonethdev" master "$devbond0" 1>/dev/null 2>/dev/null + ip link set dev "$nonethdev" nomaster 1>/dev/null 2>/dev/null + # restore ARPHRD_ETHER type by enslaving such device + ip link set dev "$devbond2" master "$devbond0" + check_err $? "could not enslave $devbond2 to $devbond0" + + bond_check_flags "$devbond0" + + # clean up + ip link del dev "$devbond0" + ip link del dev "$devbond1" + ip link del dev "$devbond2" + ip link del dev "$nonethdev" +} + +bond_test_unsuccessful_enslave_type_change() +{ + RET=0 + + bond_test_enslave_type_change 0 + log_test "Change ether type of an enslaved bond device with unsuccessful enslave" +} + +bond_test_successful_enslave_type_change() +{ + RET=0 + + bond_test_enslave_type_change 1 + log_test "Change ether type of an enslaved bond device with successful enslave" +} + +tests_run + +exit "$EXIT_STATUS" diff --git a/tools/testing/selftests/drivers/net/bonding/bond-lladdr-target.sh b/tools/testing/selftests/drivers/net/bonding/bond-lladdr-target.sh new file mode 100755 index 0000000000..89af402fab --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond-lladdr-target.sh @@ -0,0 +1,65 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Regression Test: +# Verify bond interface could up when set IPv6 link local address target. +# +# +----------------+ +# | br0 | +# | | | sw +# | veth0 veth1 | +# +---+-------+----+ +# | | +# +---+-------+----+ +# | veth0 veth1 | +# | | | host +# | bond0 | +# +----------------+ +# +# We use veths instead of physical interfaces +sw="sw-$(mktemp -u XXXXXX)" +host="ns-$(mktemp -u XXXXXX)" + +cleanup() +{ + ip netns del $sw + ip netns del $host +} + +trap cleanup 0 1 2 + +ip netns add $sw +ip netns add $host + +ip -n $host link add veth0 type veth peer name veth0 netns $sw +ip -n $host link add veth1 type veth peer name veth1 netns $sw + +ip -n $sw link add br0 type bridge +ip -n $sw link set br0 up +sw_lladdr=$(ip -n $sw addr show br0 | awk '/fe80/{print $2}' | cut -d'/' -f1) +# sleep some time to make sure bridge lladdr pass DAD +sleep 2 + +ip -n $host link add bond0 type bond mode 1 ns_ip6_target ${sw_lladdr} \ + arp_validate 3 arp_interval 1000 +# add a lladdr for bond to make sure there is a route to target +ip -n $host addr add fe80::beef/64 dev bond0 +ip -n $host link set bond0 up +ip -n $host link set veth0 master bond0 +ip -n $host link set veth1 master bond0 + +ip -n $sw link set veth0 master br0 +ip -n $sw link set veth1 master br0 +ip -n $sw link set veth0 up +ip -n $sw link set veth1 up + +sleep 5 + +rc=0 +if ip -n $host link show bond0 | grep -q LOWER_UP; then + echo "PASS" +else + echo "FAIL" + rc=1 +fi +exit $rc diff --git a/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh b/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh new file mode 100755 index 0000000000..b609fb6231 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh @@ -0,0 +1,99 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test macvlan over balance-alb + +lib_dir=$(dirname "$0") +source ${lib_dir}/bond_topo_2d1c.sh + +m1_ns="m1-$(mktemp -u XXXXXX)" +m2_ns="m1-$(mktemp -u XXXXXX)" +m1_ip4="192.0.2.11" +m1_ip6="2001:db8::11" +m2_ip4="192.0.2.12" +m2_ip6="2001:db8::12" + +cleanup() +{ + ip -n ${m1_ns} link del macv0 + ip netns del ${m1_ns} + ip -n ${m2_ns} link del macv0 + ip netns del ${m2_ns} + + client_destroy + server_destroy + gateway_destroy +} + +check_connection() +{ + local ns=${1} + local target=${2} + local message=${3:-"macvlan_over_bond"} + RET=0 + + + ip netns exec ${ns} ping ${target} -c 4 -i 0.1 &>/dev/null + check_err $? "ping failed" + log_test "$mode: $message" +} + +macvlan_over_bond() +{ + local param="$1" + RET=0 + + # setup new bond mode + bond_reset "${param}" + + ip -n ${s_ns} link add link bond0 name macv0 type macvlan mode bridge + ip -n ${s_ns} link set macv0 netns ${m1_ns} + ip -n ${m1_ns} link set dev macv0 up + ip -n ${m1_ns} addr add ${m1_ip4}/24 dev macv0 + ip -n ${m1_ns} addr add ${m1_ip6}/24 dev macv0 + + ip -n ${s_ns} link add link bond0 name macv0 type macvlan mode bridge + ip -n ${s_ns} link set macv0 netns ${m2_ns} + ip -n ${m2_ns} link set dev macv0 up + ip -n ${m2_ns} addr add ${m2_ip4}/24 dev macv0 + ip -n ${m2_ns} addr add ${m2_ip6}/24 dev macv0 + + sleep 2 + + check_connection "${c_ns}" "${s_ip4}" "IPv4: client->server" + check_connection "${c_ns}" "${s_ip6}" "IPv6: client->server" + check_connection "${c_ns}" "${m1_ip4}" "IPv4: client->macvlan_1" + check_connection "${c_ns}" "${m1_ip6}" "IPv6: client->macvlan_1" + check_connection "${c_ns}" "${m2_ip4}" "IPv4: client->macvlan_2" + check_connection "${c_ns}" "${m2_ip6}" "IPv6: client->macvlan_2" + check_connection "${m1_ns}" "${m2_ip4}" "IPv4: macvlan_1->macvlan_2" + check_connection "${m1_ns}" "${m2_ip6}" "IPv6: macvlan_1->macvlan_2" + + + sleep 5 + + check_connection "${s_ns}" "${c_ip4}" "IPv4: server->client" + check_connection "${s_ns}" "${c_ip6}" "IPv6: server->client" + check_connection "${m1_ns}" "${c_ip4}" "IPv4: macvlan_1->client" + check_connection "${m1_ns}" "${c_ip6}" "IPv6: macvlan_1->client" + check_connection "${m2_ns}" "${c_ip4}" "IPv4: macvlan_2->client" + check_connection "${m2_ns}" "${c_ip6}" "IPv6: macvlan_2->client" + check_connection "${m2_ns}" "${m1_ip4}" "IPv4: macvlan_2->macvlan_2" + check_connection "${m2_ns}" "${m1_ip6}" "IPv6: macvlan_2->macvlan_2" + + ip -n ${c_ns} neigh flush dev eth0 +} + +trap cleanup EXIT + +setup_prepare +ip netns add ${m1_ns} +ip netns add ${m2_ns} + +modes="active-backup balance-tlb balance-alb" + +for mode in $modes; do + macvlan_over_bond "mode $mode" +done + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/bonding/bond_options.sh b/tools/testing/selftests/drivers/net/bonding/bond_options.sh new file mode 100755 index 0000000000..d508486cc0 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond_options.sh @@ -0,0 +1,311 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test bonding options with mode 1,5,6 + +ALL_TESTS=" + prio + arp_validate + num_grat_arp +" + +lib_dir=$(dirname "$0") +source ${lib_dir}/bond_topo_3d1c.sh + +skip_prio() +{ + local skip=1 + + # check if iproute support prio option + ip -n ${s_ns} link set eth0 type bond_slave prio 10 + [[ $? -ne 0 ]] && skip=0 + + # check if kernel support prio option + ip -n ${s_ns} -d link show eth0 | grep -q "prio 10" + [[ $? -ne 0 ]] && skip=0 + + return $skip +} + +skip_ns() +{ + local skip=1 + + # check if iproute support ns_ip6_target option + ip -n ${s_ns} link add bond1 type bond ns_ip6_target ${g_ip6} + [[ $? -ne 0 ]] && skip=0 + + # check if kernel support ns_ip6_target option + ip -n ${s_ns} -d link show bond1 | grep -q "ns_ip6_target ${g_ip6}" + [[ $? -ne 0 ]] && skip=0 + + ip -n ${s_ns} link del bond1 + + return $skip +} + +active_slave="" +check_active_slave() +{ + local target_active_slave=$1 + active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + test "$active_slave" = "$target_active_slave" + check_err $? "Current active slave is $active_slave but not $target_active_slave" +} + + +# Test bonding prio option +prio_test() +{ + local param="$1" + RET=0 + + # create bond + bond_reset "${param}" + + # check bonding member prio value + ip -n ${s_ns} link set eth0 type bond_slave prio 0 + ip -n ${s_ns} link set eth1 type bond_slave prio 10 + ip -n ${s_ns} link set eth2 type bond_slave prio 11 + cmd_jq "ip -n ${s_ns} -d -j link show eth0" \ + ".[].linkinfo.info_slave_data | select (.prio == 0)" "-e" &> /dev/null + check_err $? "eth0 prio is not 0" + cmd_jq "ip -n ${s_ns} -d -j link show eth1" \ + ".[].linkinfo.info_slave_data | select (.prio == 10)" "-e" &> /dev/null + check_err $? "eth1 prio is not 10" + cmd_jq "ip -n ${s_ns} -d -j link show eth2" \ + ".[].linkinfo.info_slave_data | select (.prio == 11)" "-e" &> /dev/null + check_err $? "eth2 prio is not 11" + + bond_check_connection "setup" + + # active slave should be the primary slave + check_active_slave eth1 + + # active slave should be the higher prio slave + ip -n ${s_ns} link set $active_slave down + bond_check_connection "fail over" + check_active_slave eth2 + + # when only 1 slave is up + ip -n ${s_ns} link set $active_slave down + bond_check_connection "only 1 slave up" + check_active_slave eth0 + + # when a higher prio slave change to up + ip -n ${s_ns} link set eth2 up + bond_check_connection "higher prio slave up" + case $primary_reselect in + "0") + check_active_slave "eth2" + ;; + "1") + check_active_slave "eth0" + ;; + "2") + check_active_slave "eth0" + ;; + esac + local pre_active_slave=$active_slave + + # when the primary slave change to up + ip -n ${s_ns} link set eth1 up + bond_check_connection "primary slave up" + case $primary_reselect in + "0") + check_active_slave "eth1" + ;; + "1") + check_active_slave "$pre_active_slave" + ;; + "2") + check_active_slave "$pre_active_slave" + ip -n ${s_ns} link set $active_slave down + bond_check_connection "pre_active slave down" + check_active_slave "eth1" + ;; + esac + + # Test changing bond slave prio + if [[ "$primary_reselect" == "0" ]];then + ip -n ${s_ns} link set eth0 type bond_slave prio 1000000 + ip -n ${s_ns} link set eth1 type bond_slave prio 0 + ip -n ${s_ns} link set eth2 type bond_slave prio -50 + ip -n ${s_ns} -d link show eth0 | grep -q 'prio 1000000' + check_err $? "eth0 prio is not 1000000" + ip -n ${s_ns} -d link show eth1 | grep -q 'prio 0' + check_err $? "eth1 prio is not 0" + ip -n ${s_ns} -d link show eth2 | grep -q 'prio -50' + check_err $? "eth3 prio is not -50" + check_active_slave "eth1" + + ip -n ${s_ns} link set $active_slave down + bond_check_connection "change slave prio" + check_active_slave "eth0" + fi +} + +prio_miimon() +{ + local primary_reselect + local mode=$1 + + for primary_reselect in 0 1 2; do + prio_test "mode $mode miimon 100 primary eth1 primary_reselect $primary_reselect" + log_test "prio" "$mode miimon primary_reselect $primary_reselect" + done +} + +prio_arp() +{ + local primary_reselect + local mode=$1 + + for primary_reselect in 0 1 2; do + prio_test "mode $mode arp_interval 100 arp_ip_target ${g_ip4} primary eth1 primary_reselect $primary_reselect" + log_test "prio" "$mode arp_ip_target primary_reselect $primary_reselect" + done +} + +prio_ns() +{ + local primary_reselect + local mode=$1 + + if skip_ns; then + log_test_skip "prio ns" "Current iproute or kernel doesn't support bond option 'ns_ip6_target'." + return 0 + fi + + for primary_reselect in 0 1 2; do + prio_test "mode $mode arp_interval 100 ns_ip6_target ${g_ip6} primary eth1 primary_reselect $primary_reselect" + log_test "prio" "$mode ns_ip6_target primary_reselect $primary_reselect" + done +} + +prio() +{ + local mode modes="active-backup balance-tlb balance-alb" + + if skip_prio; then + log_test_skip "prio" "Current iproute or kernel doesn't support bond option 'prio'." + return 0 + fi + + for mode in $modes; do + prio_miimon $mode + done + prio_arp "active-backup" + prio_ns "active-backup" +} + +arp_validate_test() +{ + local param="$1" + RET=0 + + # create bond + bond_reset "${param}" + + bond_check_connection + [ $RET -ne 0 ] && log_test "arp_validate" "$retmsg" + + # wait for a while to make sure the mii status stable + sleep 5 + for i in $(seq 0 2); do + mii_status=$(cmd_jq "ip -n ${s_ns} -j -d link show eth$i" ".[].linkinfo.info_slave_data.mii_status") + if [ ${mii_status} != "UP" ]; then + RET=1 + log_test "arp_validate" "interface eth$i mii_status $mii_status" + fi + done +} + +arp_validate_arp() +{ + local mode=$1 + local val + for val in $(seq 0 6); do + arp_validate_test "mode $mode arp_interval 100 arp_ip_target ${g_ip4} arp_validate $val" + log_test "arp_validate" "$mode arp_ip_target arp_validate $val" + done +} + +arp_validate_ns() +{ + local mode=$1 + local val + + if skip_ns; then + log_test_skip "arp_validate ns" "Current iproute or kernel doesn't support bond option 'ns_ip6_target'." + return 0 + fi + + for val in $(seq 0 6); do + arp_validate_test "mode $mode arp_interval 100 ns_ip6_target ${g_ip6} arp_validate $val" + log_test "arp_validate" "$mode ns_ip6_target arp_validate $val" + done +} + +arp_validate() +{ + arp_validate_arp "active-backup" + arp_validate_ns "active-backup" +} + +garp_test() +{ + local param="$1" + local active_slave exp_num real_num i + RET=0 + + # create bond + bond_reset "${param}" + + bond_check_connection + [ $RET -ne 0 ] && log_test "num_grat_arp" "$retmsg" + + + # Add tc rules to count GARP number + for i in $(seq 0 2); do + tc -n ${g_ns} filter add dev s$i ingress protocol arp pref 1 handle 101 \ + flower skip_hw arp_op request arp_sip ${s_ip4} arp_tip ${s_ip4} action pass + done + + # Do failover + active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + ip -n ${s_ns} link set ${active_slave} down + + exp_num=$(echo "${param}" | cut -f6 -d ' ') + sleep $((exp_num + 2)) + + active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + + # check result + real_num=$(tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}") + if [ "${real_num}" -ne "${exp_num}" ]; then + echo "$real_num garp packets sent on active slave ${active_slave}" + RET=1 + fi + + for i in $(seq 0 2); do + tc -n ${g_ns} filter del dev s$i ingress + done +} + +num_grat_arp() +{ + local val + for val in 10 20 30 50; do + garp_test "mode active-backup miimon 100 num_grat_arp $val peer_notify_delay 1000" + log_test "num_grat_arp" "active-backup miimon num_grat_arp $val" + done +} + +trap cleanup EXIT + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh b/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh new file mode 100644 index 0000000000..a509ef949d --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh @@ -0,0 +1,158 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Topology for Bond mode 1,5,6 testing +# +# +-------------------------+ +# | bond0 | Server +# | + | 192.0.2.1/24 +# | eth0 | eth1 | 2001:db8::1/24 +# | +---+---+ | +# | | | | +# +-------------------------+ +# | | +# +-------------------------+ +# | | | | +# | +---+-------+---+ | Gateway +# | | br0 | | 192.0.2.254/24 +# | +-------+-------+ | 2001:db8::254/24 +# | | | +# +-------------------------+ +# | +# +-------------------------+ +# | | | Client +# | + | 192.0.2.10/24 +# | eth0 | 2001:db8::10/24 +# +-------------------------+ + +REQUIRE_MZ=no +NUM_NETIFS=0 +lib_dir=$(dirname "$0") +source ${lib_dir}/net_forwarding_lib.sh + +s_ns="s-$(mktemp -u XXXXXX)" +c_ns="c-$(mktemp -u XXXXXX)" +g_ns="g-$(mktemp -u XXXXXX)" +s_ip4="192.0.2.1" +c_ip4="192.0.2.10" +g_ip4="192.0.2.254" +s_ip6="2001:db8::1" +c_ip6="2001:db8::10" +g_ip6="2001:db8::254" + +gateway_create() +{ + ip netns add ${g_ns} + ip -n ${g_ns} link add br0 type bridge + ip -n ${g_ns} link set br0 up + ip -n ${g_ns} addr add ${g_ip4}/24 dev br0 + ip -n ${g_ns} addr add ${g_ip6}/24 dev br0 +} + +gateway_destroy() +{ + ip -n ${g_ns} link del br0 + ip netns del ${g_ns} +} + +server_create() +{ + ip netns add ${s_ns} + ip -n ${s_ns} link add bond0 type bond mode active-backup miimon 100 + + for i in $(seq 0 1); do + ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns} + + ip -n ${g_ns} link set s${i} up + ip -n ${g_ns} link set s${i} master br0 + ip -n ${s_ns} link set eth${i} master bond0 + + tc -n ${g_ns} qdisc add dev s${i} clsact + done + + ip -n ${s_ns} link set bond0 up + ip -n ${s_ns} addr add ${s_ip4}/24 dev bond0 + ip -n ${s_ns} addr add ${s_ip6}/24 dev bond0 + sleep 2 +} + +# Reset bond with new mode and options +bond_reset() +{ + # Count the eth link number in real-time as this function + # maybe called from other topologies. + local link_num=$(ip -n ${s_ns} -br link show | grep -c "^eth") + local param="$1" + link_num=$((link_num -1)) + + ip -n ${s_ns} link set bond0 down + ip -n ${s_ns} link del bond0 + + ip -n ${s_ns} link add bond0 type bond $param + for i in $(seq 0 ${link_num}); do + ip -n ${s_ns} link set eth$i master bond0 + done + + ip -n ${s_ns} link set bond0 up + ip -n ${s_ns} addr add ${s_ip4}/24 dev bond0 + ip -n ${s_ns} addr add ${s_ip6}/24 dev bond0 + sleep 2 +} + +server_destroy() +{ + # Count the eth link number in real-time as this function + # maybe called from other topologies. + local link_num=$(ip -n ${s_ns} -br link show | grep -c "^eth") + link_num=$((link_num -1)) + for i in $(seq 0 ${link_num}); do + ip -n ${s_ns} link del eth${i} + done + ip netns del ${s_ns} +} + +client_create() +{ + ip netns add ${c_ns} + ip -n ${c_ns} link add eth0 type veth peer name c0 netns ${g_ns} + + ip -n ${g_ns} link set c0 up + ip -n ${g_ns} link set c0 master br0 + + ip -n ${c_ns} link set eth0 up + ip -n ${c_ns} addr add ${c_ip4}/24 dev eth0 + ip -n ${c_ns} addr add ${c_ip6}/24 dev eth0 +} + +client_destroy() +{ + ip -n ${c_ns} link del eth0 + ip netns del ${c_ns} +} + +setup_prepare() +{ + gateway_create + server_create + client_create +} + +cleanup() +{ + pre_cleanup + + client_destroy + server_destroy + gateway_destroy +} + +bond_check_connection() +{ + local msg=${1:-"check connection"} + + sleep 2 + ip netns exec ${s_ns} ping ${c_ip4} -c5 -i 0.1 &>/dev/null + check_err $? "${msg}: ping failed" + ip netns exec ${s_ns} ping6 ${c_ip6} -c5 -i 0.1 &>/dev/null + check_err $? "${msg}: ping6 failed" +} diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh new file mode 100644 index 0000000000..3a1333d9a8 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh @@ -0,0 +1,43 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Topology for Bond mode 1,5,6 testing +# +# +-------------------------------------+ +# | bond0 | +# | + | Server +# | eth0 | eth1 eth2 | 192.0.2.1/24 +# | +-------------------+ | 2001:db8::1/24 +# | | | | | +# +-------------------------------------+ +# | | | +# +-------------------------------------+ +# | | | | | +# | +---+---------+---------+---+ | Gateway +# | | br0 | | 192.0.2.254/24 +# | +-------------+-------------+ | 2001:db8::254/24 +# | | | +# +-------------------------------------+ +# | +# +-------------------------------------+ +# | | | Client +# | + | 192.0.2.10/24 +# | eth0 | 2001:db8::10/24 +# +-------------------------------------+ + +source bond_topo_2d1c.sh + +setup_prepare() +{ + gateway_create + server_create + client_create + + # Add the extra device as we use 3 down links for bond0 + local i=2 + ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns} + ip -n ${g_ns} link set s${i} up + ip -n ${g_ns} link set s${i} master br0 + ip -n ${s_ns} link set eth${i} master bond0 + tc -n ${g_ns} qdisc add dev s${i} clsact +} diff --git a/tools/testing/selftests/drivers/net/bonding/config b/tools/testing/selftests/drivers/net/bonding/config new file mode 100644 index 0000000000..70638fa50b --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/config @@ -0,0 +1,2 @@ +CONFIG_BONDING=y +CONFIG_MACVLAN=y diff --git a/tools/testing/selftests/drivers/net/bonding/dev_addr_lists.sh b/tools/testing/selftests/drivers/net/bonding/dev_addr_lists.sh new file mode 100755 index 0000000000..5cfe7d8ebc --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/dev_addr_lists.sh @@ -0,0 +1,109 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test bond device handling of addr lists (dev->uc, mc) +# + +ALL_TESTS=" + bond_cleanup_mode1 + bond_cleanup_mode4 + bond_listen_lacpdu_multicast_case_down + bond_listen_lacpdu_multicast_case_up +" + +REQUIRE_MZ=no +NUM_NETIFS=0 +lib_dir=$(dirname "$0") +source "$lib_dir"/net_forwarding_lib.sh + +source "$lib_dir"/lag_lib.sh + + +destroy() +{ + local ifnames=(dummy1 dummy2 bond1 mv0) + local ifname + + for ifname in "${ifnames[@]}"; do + ip link del "$ifname" &>/dev/null + done +} + +cleanup() +{ + pre_cleanup + + destroy +} + + +# bond driver control paths vary between modes that have a primary slave +# (bond_uses_primary()) and others. Test both kinds of modes. + +bond_cleanup_mode1() +{ + RET=0 + + test_LAG_cleanup "bonding" "active-backup" +} + +bond_cleanup_mode4() { + RET=0 + + test_LAG_cleanup "bonding" "802.3ad" +} + +bond_listen_lacpdu_multicast() +{ + # Initial state of bond device, up | down + local init_state=$1 + local lacpdu_mc="01:80:c2:00:00:02" + + ip link add dummy1 type dummy + ip link add bond1 "$init_state" type bond mode 802.3ad + ip link set dev dummy1 master bond1 + if [ "$init_state" = "down" ]; then + ip link set dev bond1 up + fi + + grep_bridge_fdb "$lacpdu_mc" bridge fdb show brport dummy1 >/dev/null + check_err $? "LACPDU multicast address not present on slave (1)" + + ip link set dev bond1 down + + not grep_bridge_fdb "$lacpdu_mc" bridge fdb show brport dummy1 >/dev/null + check_err $? "LACPDU multicast address still present on slave" + + ip link set dev bond1 up + + grep_bridge_fdb "$lacpdu_mc" bridge fdb show brport dummy1 >/dev/null + check_err $? "LACPDU multicast address not present on slave (2)" + + cleanup + + log_test "bonding LACPDU multicast address to slave (from bond $init_state)" +} + +# The LACPDU mc addr is added by different paths depending on the initial state +# of the bond when enslaving a device. Test both cases. + +bond_listen_lacpdu_multicast_case_down() +{ + RET=0 + + bond_listen_lacpdu_multicast "down" +} + +bond_listen_lacpdu_multicast_case_up() +{ + RET=0 + + bond_listen_lacpdu_multicast "up" +} + + +trap cleanup EXIT + +tests_run + +exit "$EXIT_STATUS" diff --git a/tools/testing/selftests/drivers/net/bonding/lag_lib.sh b/tools/testing/selftests/drivers/net/bonding/lag_lib.sh new file mode 100644 index 0000000000..2a268b17b6 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/lag_lib.sh @@ -0,0 +1,167 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +NAMESPACES="" + +# Test that a link aggregation device (bonding, team) removes the hardware +# addresses that it adds on its underlying devices. +test_LAG_cleanup() +{ + local driver=$1 + local mode=$2 + local ucaddr="02:00:00:12:34:56" + local addr6="fe80::78:9abc/64" + local mcaddr="33:33:ff:78:9a:bc" + local name + + ip link add dummy1 type dummy + ip link add dummy2 type dummy + if [ "$driver" = "bonding" ]; then + name="bond1" + ip link add "$name" up type bond mode "$mode" + ip link set dev dummy1 master "$name" + ip link set dev dummy2 master "$name" + elif [ "$driver" = "team" ]; then + name="team0" + teamd -d -c ' + { + "device": "'"$name"'", + "runner": { + "name": "'"$mode"'" + }, + "ports": { + "dummy1": + {}, + "dummy2": + {} + } + } + ' + ip link set dev "$name" up + else + check_err 1 + log_test test_LAG_cleanup ": unknown driver \"$driver\"" + return + fi + + # Used to test dev->uc handling + ip link add mv0 link "$name" up address "$ucaddr" type macvlan + # Used to test dev->mc handling + ip address add "$addr6" dev "$name" + ip link set dev "$name" down + ip link del "$name" + + not grep_bridge_fdb "$ucaddr" bridge fdb show >/dev/null + check_err $? "macvlan unicast address still present on a slave" + + not grep_bridge_fdb "$mcaddr" bridge fdb show >/dev/null + check_err $? "IPv6 solicited-node multicast mac address still present on a slave" + + cleanup + + log_test "$driver cleanup mode $mode" +} + +# Build a generic 2 node net namespace with 2 connections +# between the namespaces +# +# +-----------+ +-----------+ +# | node1 | | node2 | +# | | | | +# | | | | +# | eth0 +-------+ eth0 | +# | | | | +# | eth1 +-------+ eth1 | +# | | | | +# +-----------+ +-----------+ +lag_setup2x2() +{ + local state=${1:-down} + local namespaces="lag_node1 lag_node2" + + # create namespaces + for n in ${namespaces}; do + ip netns add ${n} + done + + # wire up namespaces + ip link add name lag1 type veth peer name lag1-end + ip link set dev lag1 netns lag_node1 $state name eth0 + ip link set dev lag1-end netns lag_node2 $state name eth0 + + ip link add name lag1 type veth peer name lag1-end + ip link set dev lag1 netns lag_node1 $state name eth1 + ip link set dev lag1-end netns lag_node2 $state name eth1 + + NAMESPACES="${namespaces}" +} + +# cleanup all lag related namespaces and remove the bonding module +lag_cleanup() +{ + for n in ${NAMESPACES}; do + ip netns delete ${n} >/dev/null 2>&1 || true + done + modprobe -r bonding +} + +SWITCH="lag_node1" +CLIENT="lag_node2" +CLIENTIP="172.20.2.1" +SWITCHIP="172.20.2.2" + +lag_setup_network() +{ + lag_setup2x2 "down" + + # create switch + ip netns exec ${SWITCH} ip link add br0 up type bridge + ip netns exec ${SWITCH} ip link set eth0 master br0 up + ip netns exec ${SWITCH} ip link set eth1 master br0 up + ip netns exec ${SWITCH} ip addr add ${SWITCHIP}/24 dev br0 +} + +lag_reset_network() +{ + ip netns exec ${CLIENT} ip link del bond0 + ip netns exec ${SWITCH} ip link set eth0 up + ip netns exec ${SWITCH} ip link set eth1 up +} + +create_bond() +{ + # create client + ip netns exec ${CLIENT} ip link set eth0 down + ip netns exec ${CLIENT} ip link set eth1 down + + ip netns exec ${CLIENT} ip link add bond0 type bond $@ + ip netns exec ${CLIENT} ip link set eth0 master bond0 + ip netns exec ${CLIENT} ip link set eth1 master bond0 + ip netns exec ${CLIENT} ip link set bond0 up + ip netns exec ${CLIENT} ip addr add ${CLIENTIP}/24 dev bond0 +} + +test_bond_recovery() +{ + RET=0 + + create_bond $@ + + # verify connectivity + ip netns exec ${CLIENT} ping ${SWITCHIP} -c 2 >/dev/null 2>&1 + check_err $? "No connectivity" + + # force the links of the bond down + ip netns exec ${SWITCH} ip link set eth0 down + sleep 2 + ip netns exec ${SWITCH} ip link set eth0 up + ip netns exec ${SWITCH} ip link set eth1 down + + # re-verify connectivity + ip netns exec ${CLIENT} ping ${SWITCHIP} -c 2 >/dev/null 2>&1 + + local rc=$? + check_err $rc "Bond failed to recover" + log_test "$1 ($2) bond recovery" + lag_reset_network +} diff --git a/tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh b/tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh new file mode 100755 index 0000000000..b76bf50309 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh @@ -0,0 +1,45 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Regression Test: +# When the bond is configured with down/updelay and the link state of +# slave members flaps if there are no remaining members up the bond +# should immediately select a member to bring up. (from bonding.txt +# section 13.1 paragraph 4) +# +# +-------------+ +-----------+ +# | client | | switch | +# | | | | +# | +--------| link1 |-----+ | +# | | +-------+ | | +# | | | | | | +# | | +-------+ | | +# | | bond | link2 | Br0 | | +# +-------------+ +-----------+ +# 172.20.2.1 172.20.2.2 + + +REQUIRE_MZ=no +REQUIRE_JQ=no +NUM_NETIFS=0 +lib_dir=$(dirname "$0") +source "$lib_dir"/net_forwarding_lib.sh +source "$lib_dir"/lag_lib.sh + +cleanup() +{ + lag_cleanup +} + +trap cleanup 0 1 2 + +lag_setup_network +test_bond_recovery mode 1 miimon 100 updelay 0 +test_bond_recovery mode 1 miimon 100 updelay 200 +test_bond_recovery mode 1 miimon 100 updelay 500 +test_bond_recovery mode 1 miimon 100 updelay 1000 +test_bond_recovery mode 1 miimon 100 updelay 2000 +test_bond_recovery mode 1 miimon 100 updelay 5000 +test_bond_recovery mode 1 miimon 100 updelay 10000 + +exit "$EXIT_STATUS" diff --git a/tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh b/tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh new file mode 100755 index 0000000000..8c26190021 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh @@ -0,0 +1,45 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Regression Test: +# When the bond is configured with down/updelay and the link state of +# slave members flaps if there are no remaining members up the bond +# should immediately select a member to bring up. (from bonding.txt +# section 13.1 paragraph 4) +# +# +-------------+ +-----------+ +# | client | | switch | +# | | | | +# | +--------| link1 |-----+ | +# | | +-------+ | | +# | | | | | | +# | | +-------+ | | +# | | bond | link2 | Br0 | | +# +-------------+ +-----------+ +# 172.20.2.1 172.20.2.2 + + +REQUIRE_MZ=no +REQUIRE_JQ=no +NUM_NETIFS=0 +lib_dir=$(dirname "$0") +source "$lib_dir"/net_forwarding_lib.sh +source "$lib_dir"/lag_lib.sh + +cleanup() +{ + lag_cleanup +} + +trap cleanup 0 1 2 + +lag_setup_network +test_bond_recovery mode 2 miimon 100 updelay 0 +test_bond_recovery mode 2 miimon 100 updelay 200 +test_bond_recovery mode 2 miimon 100 updelay 500 +test_bond_recovery mode 2 miimon 100 updelay 1000 +test_bond_recovery mode 2 miimon 100 updelay 2000 +test_bond_recovery mode 2 miimon 100 updelay 5000 +test_bond_recovery mode 2 miimon 100 updelay 10000 + +exit "$EXIT_STATUS" diff --git a/tools/testing/selftests/drivers/net/bonding/net_forwarding_lib.sh b/tools/testing/selftests/drivers/net/bonding/net_forwarding_lib.sh new file mode 120000 index 0000000000..39c96828c5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/net_forwarding_lib.sh @@ -0,0 +1 @@ +../../../net/forwarding/lib.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/bonding/settings b/tools/testing/selftests/drivers/net/bonding/settings new file mode 100644 index 0000000000..79b65bdf05 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/settings @@ -0,0 +1 @@ +timeout=1200 diff --git a/tools/testing/selftests/drivers/net/dsa/Makefile b/tools/testing/selftests/drivers/net/dsa/Makefile new file mode 100644 index 0000000000..c393e7b738 --- /dev/null +++ b/tools/testing/selftests/drivers/net/dsa/Makefile @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0+ OR MIT + +TEST_PROGS = bridge_locked_port.sh \ + bridge_mdb.sh \ + bridge_mld.sh \ + bridge_vlan_aware.sh \ + bridge_vlan_mcast.sh \ + bridge_vlan_unaware.sh \ + local_termination.sh \ + no_forwarding.sh \ + tc_actions.sh \ + test_bridge_fdb_stress.sh + +TEST_PROGS_EXTENDED := lib.sh tc_common.sh + +TEST_FILES := forwarding.config + +include ../../../lib.mk diff --git a/tools/testing/selftests/drivers/net/dsa/bridge_locked_port.sh b/tools/testing/selftests/drivers/net/dsa/bridge_locked_port.sh new file mode 120000 index 0000000000..f5eb940c4c --- /dev/null +++ b/tools/testing/selftests/drivers/net/dsa/bridge_locked_port.sh @@ -0,0 +1 @@ +../../../net/forwarding/bridge_locked_port.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/dsa/bridge_mdb.sh b/tools/testing/selftests/drivers/net/dsa/bridge_mdb.sh new file mode 120000 index 0000000000..76492da525 --- /dev/null +++ b/tools/testing/selftests/drivers/net/dsa/bridge_mdb.sh @@ -0,0 +1 @@ +../../../net/forwarding/bridge_mdb.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/dsa/bridge_mld.sh b/tools/testing/selftests/drivers/net/dsa/bridge_mld.sh new file mode 120000 index 0000000000..81a7e0df04 --- /dev/null +++ b/tools/testing/selftests/drivers/net/dsa/bridge_mld.sh @@ -0,0 +1 @@ +../../../net/forwarding/bridge_mld.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/dsa/bridge_vlan_aware.sh b/tools/testing/selftests/drivers/net/dsa/bridge_vlan_aware.sh new file mode 120000 index 0000000000..9831ed7437 --- /dev/null +++ b/tools/testing/selftests/drivers/net/dsa/bridge_vlan_aware.sh @@ -0,0 +1 @@ +../../../net/forwarding/bridge_vlan_aware.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/dsa/bridge_vlan_mcast.sh b/tools/testing/selftests/drivers/net/dsa/bridge_vlan_mcast.sh new file mode 120000 index 0000000000..7f3c3f0bf7 --- /dev/null +++ b/tools/testing/selftests/drivers/net/dsa/bridge_vlan_mcast.sh @@ -0,0 +1 @@ +../../../net/forwarding/bridge_vlan_mcast.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/dsa/bridge_vlan_unaware.sh b/tools/testing/selftests/drivers/net/dsa/bridge_vlan_unaware.sh new file mode 120000 index 0000000000..bf1a57e6bd --- /dev/null +++ b/tools/testing/selftests/drivers/net/dsa/bridge_vlan_unaware.sh @@ -0,0 +1 @@ +../../../net/forwarding/bridge_vlan_unaware.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/dsa/forwarding.config b/tools/testing/selftests/drivers/net/dsa/forwarding.config new file mode 100644 index 0000000000..7adc1396fa --- /dev/null +++ b/tools/testing/selftests/drivers/net/dsa/forwarding.config @@ -0,0 +1,2 @@ +NETIF_CREATE=no +STABLE_MAC_ADDRS=yes diff --git a/tools/testing/selftests/drivers/net/dsa/lib.sh b/tools/testing/selftests/drivers/net/dsa/lib.sh new file mode 120000 index 0000000000..39c96828c5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/dsa/lib.sh @@ -0,0 +1 @@ +../../../net/forwarding/lib.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/dsa/local_termination.sh b/tools/testing/selftests/drivers/net/dsa/local_termination.sh new file mode 120000 index 0000000000..c08166f845 --- /dev/null +++ b/tools/testing/selftests/drivers/net/dsa/local_termination.sh @@ -0,0 +1 @@ +../../../net/forwarding/local_termination.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/dsa/no_forwarding.sh b/tools/testing/selftests/drivers/net/dsa/no_forwarding.sh new file mode 120000 index 0000000000..b9757466bc --- /dev/null +++ b/tools/testing/selftests/drivers/net/dsa/no_forwarding.sh @@ -0,0 +1 @@ +../../../net/forwarding/no_forwarding.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/dsa/tc_actions.sh b/tools/testing/selftests/drivers/net/dsa/tc_actions.sh new file mode 120000 index 0000000000..306213d943 --- /dev/null +++ b/tools/testing/selftests/drivers/net/dsa/tc_actions.sh @@ -0,0 +1 @@ +../../../net/forwarding/tc_actions.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/dsa/tc_common.sh b/tools/testing/selftests/drivers/net/dsa/tc_common.sh new file mode 120000 index 0000000000..bc3465bdc3 --- /dev/null +++ b/tools/testing/selftests/drivers/net/dsa/tc_common.sh @@ -0,0 +1 @@ +../../../net/forwarding/tc_common.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/dsa/test_bridge_fdb_stress.sh b/tools/testing/selftests/drivers/net/dsa/test_bridge_fdb_stress.sh new file mode 100755 index 0000000000..92acab83fb --- /dev/null +++ b/tools/testing/selftests/drivers/net/dsa/test_bridge_fdb_stress.sh @@ -0,0 +1,47 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Bridge FDB entries can be offloaded to DSA switches without holding the +# rtnl_mutex. Traditionally this mutex has conferred drivers implicit +# serialization, which means their code paths are not well tested in the +# presence of concurrency. +# This test creates a background task that stresses the FDB by adding and +# deleting an entry many times in a row without the rtnl_mutex held. +# It then tests the driver resistance to concurrency by calling .ndo_fdb_dump +# (with rtnl_mutex held) from a foreground task. +# Since either the FDB dump or the additions/removals can fail, but the +# additions and removals are performed in deferred as opposed to process +# context, we cannot simply check for user space error codes. + +WAIT_TIME=1 +NUM_NETIFS=1 +REQUIRE_JQ="no" +REQUIRE_MZ="no" +NETIF_CREATE="no" +lib_dir=$(dirname "$0") +source "$lib_dir"/lib.sh + +cleanup() { + echo "Cleaning up" + kill $pid && wait $pid &> /dev/null + ip link del br0 + echo "Please check kernel log for errors" +} +trap 'cleanup' EXIT + +eth=${NETIFS[p1]} + +ip link del br0 2>&1 >/dev/null || : +ip link add br0 type bridge && ip link set $eth master br0 + +(while :; do + bridge fdb add 00:01:02:03:04:05 dev $eth master static + bridge fdb del 00:01:02:03:04:05 dev $eth master static +done) & +pid=$! + +for i in $(seq 1 50); do + bridge fdb show > /dev/null + sleep 3 + echo "$((${i} * 2))% complete..." +done diff --git a/tools/testing/selftests/drivers/net/mlxsw/blackhole_routes.sh b/tools/testing/selftests/drivers/net/mlxsw/blackhole_routes.sh new file mode 100755 index 0000000000..bdffe698e1 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/blackhole_routes.sh @@ -0,0 +1,201 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test that blackhole routes are marked as offloaded and that packets hitting +# them are dropped by the ASIC and not by the kernel. +# +# +---------------------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 192.0.2.1/24 | +# | | 2001:db8:1::1/64 | +# | | | +# | | default via 192.0.2.2 | +# | | default via 2001:db8:1::2 | +# +----|----------------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | + $rp1 | +# | 192.0.2.2/24 | +# | 2001:db8:1::2/64 | +# | | +# | 2001:db8:2::2/64 | +# | 198.51.100.2/24 | +# | + $rp2 | +# | | | +# +----|----------------------------------------------------------------------+ +# | +# +----|----------------------------+ +# | | default via 198.51.100.2 | +# | | default via 2001:db8:2::2 | +# | | | +# | | 2001:db8:2::1/64 | +# | | 198.51.100.1/24 | +# | + $h2 | +# | H2 (vrf) | +# +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + ping_ipv4 + ping_ipv6 + blackhole_ipv4 + blackhole_ipv6 +" +NUM_NETIFS=4 +: ${TIMEOUT:=20000} # ms +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 + ip -6 route add default vrf v$h1 nexthop via 2001:db8:1::2 +} + +h1_destroy() +{ + ip -6 route del default vrf v$h1 nexthop via 2001:db8:1::2 + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/24 2001:db8:2::1/64 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 + ip -6 route add default vrf v$h2 nexthop via 2001:db8:2::2 +} + +h2_destroy() +{ + ip -6 route del default vrf v$h2 nexthop via 2001:db8:2::2 + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + simple_if_fini $h2 198.51.100.1/24 2001:db8:2::1/64 +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + tc qdisc add dev $rp1 clsact + + __addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64 + __addr_add_del $rp2 add 198.51.100.2/24 2001:db8:2::2/64 +} + +router_destroy() +{ + __addr_add_del $rp2 del 198.51.100.2/24 2001:db8:2::2/64 + __addr_add_del $rp1 del 192.0.2.2/24 2001:db8:1::2/64 + + tc qdisc del dev $rp1 clsact + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +ping_ipv4() +{ + ping_test $h1 198.51.100.1 ": h1->h2" +} + +ping_ipv6() +{ + ping6_test $h1 2001:db8:2::1 ": h1->h2" +} + +blackhole_ipv4() +{ + # Transmit packets from H1 to H2 and make sure they are dropped by the + # ASIC and not by the kernel + RET=0 + + ip -4 route add blackhole 198.51.100.0/30 + tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \ + skip_hw dst_ip 198.51.100.1 src_ip 192.0.2.1 ip_proto icmp \ + action pass + + busywait "$TIMEOUT" wait_for_offload ip -4 route show 198.51.100.0/30 + check_err $? "route not marked as offloaded when should" + + ping_do $h1 198.51.100.1 + check_fail $? "ping passed when should not" + + tc_check_packets "dev $rp1 ingress" 101 0 + check_err $? "packets trapped and not dropped by ASIC" + + log_test "IPv4 blackhole route" + + tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower + ip -4 route del blackhole 198.51.100.0/30 +} + +blackhole_ipv6() +{ + RET=0 + + ip -6 route add blackhole 2001:db8:2::/120 + tc filter add dev $rp1 ingress protocol ipv6 pref 1 handle 101 flower \ + skip_hw dst_ip 2001:db8:2::1 src_ip 2001:db8:1::1 \ + ip_proto icmpv6 action pass + + busywait "$TIMEOUT" wait_for_offload ip -6 route show 2001:db8:2::/120 + check_err $? "route not marked as offloaded when should" + + ping6_do $h1 2001:db8:2::1 + check_fail $? "ping passed when should not" + + tc_check_packets "dev $rp1 ingress" 101 0 + check_err $? "packets trapped and not dropped by ASIC" + + log_test "IPv6 blackhole route" + + tc filter del dev $rp1 ingress protocol ipv6 pref 1 handle 101 flower + ip -6 route del blackhole 2001:db8:2::/120 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + + h1_create + h2_create + router_create +} + +cleanup() +{ + pre_cleanup + + router_destroy + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_linecard.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_linecard.sh new file mode 100755 index 0000000000..224ca3695c --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_linecard.sh @@ -0,0 +1,334 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# In addition to the common variables, user might use: +# LC_SLOT - If not set, all probed line cards are going to be tested, +# with an exception of the "activation_16x100G_test". +# It set, only the selected line card is going to be used +# for tests, including "activation_16x100G_test". + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + unprovision_test + provision_test + activation_16x100G_test +" + +NUM_NETIFS=0 + +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +until_lc_state_is() +{ + local state=$1; shift + local current=$("$@") + + echo "$current" + [ "$current" == "$state" ] +} + +until_lc_state_is_not() +{ + ! until_lc_state_is "$@" +} + +lc_state_get() +{ + local lc=$1 + + devlink lc show $DEVLINK_DEV lc $lc -j | jq -e -r ".[][][].state" +} + +lc_wait_until_state_changes() +{ + local lc=$1 + local state=$2 + local timeout=$3 # ms + + busywait "$timeout" until_lc_state_is_not "$state" lc_state_get "$lc" +} + +lc_wait_until_state_becomes() +{ + local lc=$1 + local state=$2 + local timeout=$3 # ms + + busywait "$timeout" until_lc_state_is "$state" lc_state_get "$lc" +} + +until_lc_port_count_is() +{ + local port_count=$1; shift + local current=$("$@") + + echo "$current" + [ $current == $port_count ] +} + +lc_port_count_get() +{ + local lc=$1 + + devlink port -j | jq -e -r ".[][] | select(.lc==$lc) | .port" | wc -l +} + +lc_wait_until_port_count_is() +{ + local lc=$1 + local port_count=$2 + local timeout=$3 # ms + + busywait "$timeout" until_lc_port_count_is "$port_count" lc_port_count_get "$lc" +} + +lc_nested_devlink_dev_get() +{ + local lc=$1 + + devlink lc show $DEVLINK_DEV lc $lc -j | jq -e -r ".[][][].nested_devlink" +} + +PROV_UNPROV_TIMEOUT=8000 # ms +POST_PROV_ACT_TIMEOUT=2000 # ms +PROV_PORTS_INSTANTIATION_TIMEOUT=15000 # ms + +unprovision_one() +{ + local lc=$1 + local state + + state=$(lc_state_get $lc) + check_err $? "Failed to get state of linecard $lc" + if [[ "$state" == "unprovisioned" ]]; then + return + fi + + log_info "Unprovisioning linecard $lc" + + devlink lc set $DEVLINK_DEV lc $lc notype + check_err $? "Failed to trigger linecard $lc unprovisioning" + + state=$(lc_wait_until_state_changes $lc "unprovisioning" \ + $PROV_UNPROV_TIMEOUT) + check_err $? "Failed to unprovision linecard $lc (timeout)" + + [ "$state" == "unprovisioned" ] + check_err $? "Failed to unprovision linecard $lc (state=$state)" +} + +provision_one() +{ + local lc=$1 + local type=$2 + local state + + log_info "Provisioning linecard $lc" + + devlink lc set $DEVLINK_DEV lc $lc type $type + check_err $? "Failed trigger linecard $lc provisioning" + + state=$(lc_wait_until_state_changes $lc "provisioning" \ + $PROV_UNPROV_TIMEOUT) + check_err $? "Failed to provision linecard $lc (timeout)" + + [ "$state" == "provisioned" ] || [ "$state" == "active" ] + check_err $? "Failed to provision linecard $lc (state=$state)" + + provisioned_type=$(devlink lc show $DEVLINK_DEV lc $lc -j | jq -e -r ".[][][].type") + [ "$provisioned_type" == "$type" ] + check_err $? "Wrong provision type returned for linecard $lc (got \"$provisioned_type\", expected \"$type\")" + + # Wait for possible activation to make sure the state + # won't change after return from this function. + state=$(lc_wait_until_state_becomes $lc "active" \ + $POST_PROV_ACT_TIMEOUT) +} + +unprovision_test() +{ + RET=0 + local lc + + lc=$LC_SLOT + unprovision_one $lc + log_test "Unprovision" +} + +LC_16X100G_TYPE="16x100G" +LC_16X100G_PORT_COUNT=16 + +supported_types_check() +{ + local lc=$1 + local supported_types_count + local type_index + local lc_16x100_found=false + + supported_types_count=$(devlink lc show $DEVLINK_DEV lc $lc -j | \ + jq -e -r ".[][][].supported_types | length") + [ $supported_types_count != 0 ] + check_err $? "No supported types found for linecard $lc" + for (( type_index=0; type_index<$supported_types_count; type_index++ )) + do + type=$(devlink lc show $DEVLINK_DEV lc $lc -j | \ + jq -e -r ".[][][].supported_types[$type_index]") + if [[ "$type" == "$LC_16X100G_TYPE" ]]; then + lc_16x100_found=true + break + fi + done + [ $lc_16x100_found = true ] + check_err $? "16X100G not found between supported types of linecard $lc" +} + +ports_check() +{ + local lc=$1 + local expected_port_count=$2 + local port_count + + port_count=$(lc_wait_until_port_count_is $lc $expected_port_count \ + $PROV_PORTS_INSTANTIATION_TIMEOUT) + [ $port_count != 0 ] + check_err $? "No port associated with linecard $lc" + [ $port_count == $expected_port_count ] + check_err $? "Unexpected port count linecard $lc (got $port_count, expected $expected_port_count)" +} + +lc_dev_info_provisioned_check() +{ + local lc=$1 + local nested_devlink_dev=$2 + local fixed_hw_revision + local running_ini_version + + fixed_hw_revision=$(devlink dev info $nested_devlink_dev -j | \ + jq -e -r '.[][].versions.fixed."hw.revision"') + check_err $? "Failed to get linecard $lc fixed.hw.revision" + log_info "Linecard $lc fixed.hw.revision: \"$fixed_hw_revision\"" + running_ini_version=$(devlink dev info $nested_devlink_dev -j | \ + jq -e -r '.[][].versions.running."ini.version"') + check_err $? "Failed to get linecard $lc running.ini.version" + log_info "Linecard $lc running.ini.version: \"$running_ini_version\"" +} + +provision_test() +{ + RET=0 + local lc + local type + local state + local nested_devlink_dev + + lc=$LC_SLOT + supported_types_check $lc + state=$(lc_state_get $lc) + check_err $? "Failed to get state of linecard $lc" + if [[ "$state" != "unprovisioned" ]]; then + unprovision_one $lc + fi + provision_one $lc $LC_16X100G_TYPE + ports_check $lc $LC_16X100G_PORT_COUNT + + nested_devlink_dev=$(lc_nested_devlink_dev_get $lc) + check_err $? "Failed to get nested devlink handle of linecard $lc" + lc_dev_info_provisioned_check $lc $nested_devlink_dev + + log_test "Provision" +} + +ACTIVATION_TIMEOUT=20000 # ms + +interface_check() +{ + ip link set $h1 up + ip link set $h2 up + ifaces_upped=true + setup_wait +} + +lc_dev_info_active_check() +{ + local lc=$1 + local nested_devlink_dev=$2 + local fixed_device_fw_psid + local running_device_fw + + fixed_device_fw_psid=$(devlink dev info $nested_devlink_dev -j | \ + jq -e -r ".[][].versions.fixed" | \ + jq -e -r '."fw.psid"') + check_err $? "Failed to get linecard $lc fixed fw PSID" + log_info "Linecard $lc fixed.fw.psid: \"$fixed_device_fw_psid\"" + + running_device_fw=$(devlink dev info $nested_devlink_dev -j | \ + jq -e -r ".[][].versions.running.fw") + check_err $? "Failed to get linecard $lc running.fw.version" + log_info "Linecard $lc running.fw: \"$running_device_fw\"" +} + +activation_16x100G_test() +{ + RET=0 + local lc + local type + local state + local nested_devlink_dev + + lc=$LC_SLOT + type=$LC_16X100G_TYPE + + unprovision_one $lc + provision_one $lc $type + state=$(lc_wait_until_state_becomes $lc "active" \ + $ACTIVATION_TIMEOUT) + check_err $? "Failed to get linecard $lc activated (timeout)" + + interface_check + + nested_devlink_dev=$(lc_nested_devlink_dev_get $lc) + check_err $? "Failed to get nested devlink handle of linecard $lc" + lc_dev_info_active_check $lc $nested_devlink_dev + + log_test "Activation 16x100G" +} + +setup_prepare() +{ + local lc_num=$(devlink lc show -j | jq -e -r ".[][\"$DEVLINK_DEV\"] |length") + if [[ $? -ne 0 ]] || [[ $lc_num -eq 0 ]]; then + echo "SKIP: No linecard support found" + exit $ksft_skip + fi + + if [ -z "$LC_SLOT" ]; then + echo "SKIP: \"LC_SLOT\" variable not provided" + exit $ksft_skip + fi + + # Interfaces are not present during the script start, + # that's why we define NUM_NETIFS here so dummy + # implicit veth pairs are not created. + NUM_NETIFS=2 + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + ifaces_upped=false +} + +cleanup() +{ + if [ "$ifaces_upped" = true ] ; then + ip link set $h1 down + ip link set $h2 down + fi +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap.sh new file mode 100755 index 0000000000..89b55e946e --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap.sh @@ -0,0 +1,129 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test generic devlink-trap functionality over mlxsw. These tests are not +# specific to a single trap, but do not check the devlink-trap common +# infrastructure either. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + dev_del_test +" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 +} + +h1_destroy() +{ + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 +} + +h2_destroy() +{ + simple_if_fini $h2 +} + +switch_create() +{ + ip link add dev br0 type bridge vlan_filtering 1 mcast_snooping 0 + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +switch_destroy() +{ + ip link set dev $swp2 down + ip link set dev $swp1 down + + ip link del dev br0 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +dev_del_test() +{ + local trap_name="source_mac_is_multicast" + local smac=01:02:03:04:05:06 + local num_iter=5 + local mz_pid + local i + + $MZ $h1 -c 0 -p 100 -a $smac -b bcast -t ip -q & + mz_pid=$! + + # The purpose of this test is to make sure we correctly dismantle a + # port while packets are trapped from it. This is done by reloading the + # the driver while the 'ingress_smac_mc_drop' trap is triggered. + RET=0 + + for i in $(seq 1 $num_iter); do + log_info "Iteration $i / $num_iter" + + devlink_trap_action_set $trap_name "trap" + sleep 1 + + devlink_reload + # Allow netdevices to be re-created following the reload + sleep 20 + + cleanup + setup_prepare + setup_wait + done + + log_test "Device delete" + + kill $mz_pid && wait $mz_pid &> /dev/null +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_acl_drops.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_acl_drops.sh new file mode 100755 index 0000000000..b32ba5fec5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_acl_drops.sh @@ -0,0 +1,151 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap ACL drops functionality over mlxsw. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + ingress_flow_action_drop_test + egress_flow_action_drop_test +" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 +} + +h1_destroy() +{ + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 +} + +h2_destroy() +{ + simple_if_fini $h2 +} + +switch_create() +{ + ip link add dev br0 type bridge vlan_filtering 1 mcast_snooping 0 + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev $swp2 up + + tc qdisc add dev $swp1 clsact + tc qdisc add dev $swp2 clsact +} + +switch_destroy() +{ + tc qdisc del dev $swp2 clsact + tc qdisc del dev $swp1 clsact + + ip link set dev $swp2 down + ip link set dev $swp1 down + + ip link del dev br0 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + h1mac=$(mac_get $h1) + h2mac=$(mac_get $h2) + + vrf_prepare + + h1_create + h2_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +ingress_flow_action_drop_test() +{ + local mz_pid + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower src_mac $h1mac action pass + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 \ + flower dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 0 -p 100 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -d 1msec -q & + mz_pid=$! + + RET=0 + + devlink_trap_drop_test ingress_flow_action_drop $swp2 101 + + log_test "ingress_flow_action_drop" + + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 +} + +egress_flow_action_drop_test() +{ + local mz_pid + + tc filter add dev $swp2 egress protocol ip pref 2 handle 102 \ + flower src_mac $h1mac action pass + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 0 -p 100 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -d 1msec -q & + mz_pid=$! + + RET=0 + + devlink_trap_drop_test egress_flow_action_drop $swp2 102 + + log_test "egress_flow_action_drop" + + tc filter del dev $swp2 egress protocol ip pref 1 handle 101 flower + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 2 102 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_control.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_control.sh new file mode 100755 index 0000000000..64153bbf95 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_control.sh @@ -0,0 +1,709 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap control trap functionality over mlxsw. Each registered +# control packet trap is tested to make sure it is triggered under the right +# conditions. +# +# +---------------------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 192.0.2.1/24 | +# | | 2001:db8:1::1/64 | +# | | | +# | | default via 192.0.2.2 | +# | | default via 2001:db8:1::2 | +# +----|----------------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | + $rp1 | +# | 192.0.2.2/24 | +# | 2001:db8:1::2/64 | +# | | +# | 2001:db8:2::2/64 | +# | 198.51.100.2/24 | +# | + $rp2 | +# | | | +# +----|----------------------------------------------------------------------+ +# | +# +----|----------------------------+ +# | | default via 198.51.100.2 | +# | | default via 2001:db8:2::2 | +# | | | +# | | 2001:db8:2::1/64 | +# | | 198.51.100.1/24 | +# | + $h2 | +# | H2 (vrf) | +# +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + stp_test + lacp_test + lldp_test + igmp_query_test + igmp_v1_report_test + igmp_v2_report_test + igmp_v3_report_test + igmp_v2_leave_test + mld_query_test + mld_v1_report_test + mld_v2_report_test + mld_v1_done_test + ipv4_dhcp_test + ipv6_dhcp_test + arp_request_test + arp_response_test + ipv6_neigh_solicit_test + ipv6_neigh_advert_test + ipv4_bfd_test + ipv6_bfd_test + ipv4_ospf_test + ipv6_ospf_test + ipv4_bgp_test + ipv6_bgp_test + ipv4_vrrp_test + ipv6_vrrp_test + ipv4_pim_test + ipv6_pim_test + uc_loopback_test + local_route_test + external_route_test + ipv6_uc_dip_link_local_scope_test + ipv4_router_alert_test + ipv6_router_alert_test + ipv6_dip_all_nodes_test + ipv6_dip_all_routers_test + ipv6_router_solicit_test + ipv6_router_advert_test + ipv6_redirect_test + ptp_event_test + ptp_general_test + flow_action_sample_test + flow_action_trap_test + eapol_test +" +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source mlxsw_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 + ip -6 route add default vrf v$h1 nexthop via 2001:db8:1::2 +} + +h1_destroy() +{ + ip -6 route del default vrf v$h1 nexthop via 2001:db8:1::2 + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/24 2001:db8:2::1/64 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 + ip -6 route add default vrf v$h2 nexthop via 2001:db8:2::2 +} + +h2_destroy() +{ + ip -6 route del default vrf v$h2 nexthop via 2001:db8:2::2 + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + simple_if_fini $h2 198.51.100.1/24 2001:db8:2::1/64 +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + __addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64 + __addr_add_del $rp2 add 198.51.100.2/24 2001:db8:2::2/64 +} + +router_destroy() +{ + __addr_add_del $rp2 del 198.51.100.2/24 2001:db8:2::2/64 + __addr_add_del $rp1 del 192.0.2.2/24 2001:db8:1::2/64 + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + + h1_create + h2_create + router_create +} + +cleanup() +{ + pre_cleanup + + router_destroy + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +stp_test() +{ + devlink_trap_stats_test "STP" "stp" $MZ $h1 -c 1 -t bpdu -q +} + +lacp_payload_get() +{ + local source_mac=$1; shift + local p + + p=$(: + )"01:80:C2:00:00:02:"$( : ETH daddr + )"$source_mac:"$( : ETH saddr + )"88:09:"$( : ETH type + ) + echo $p +} + +lacp_test() +{ + local h1mac=$(mac_get $h1) + + devlink_trap_stats_test "LACP" "lacp" $MZ $h1 -c 1 \ + $(lacp_payload_get $h1mac) -p 100 -q +} + +lldp_payload_get() +{ + local source_mac=$1; shift + local p + + p=$(: + )"01:80:C2:00:00:0E:"$( : ETH daddr + )"$source_mac:"$( : ETH saddr + )"88:CC:"$( : ETH type + ) + echo $p +} + +lldp_test() +{ + local h1mac=$(mac_get $h1) + + devlink_trap_stats_test "LLDP" "lldp" $MZ $h1 -c 1 \ + $(lldp_payload_get $h1mac) -p 100 -q +} + +igmp_query_test() +{ + # IGMP (IP Protocol 2) Membership Query (Type 0x11) + devlink_trap_stats_test "IGMP Membership Query" "igmp_query" \ + $MZ $h1 -c 1 -a own -b 01:00:5E:00:00:01 \ + -A 192.0.2.1 -B 224.0.0.1 -t ip proto=2,p=11 -p 100 -q +} + +igmp_v1_report_test() +{ + # IGMP (IP Protocol 2) Version 1 Membership Report (Type 0x12) + devlink_trap_stats_test "IGMP Version 1 Membership Report" \ + "igmp_v1_report" $MZ $h1 -c 1 -a own -b 01:00:5E:00:00:01 \ + -A 192.0.2.1 -B 244.0.0.1 -t ip proto=2,p=12 -p 100 -q +} + +igmp_v2_report_test() +{ + # IGMP (IP Protocol 2) Version 2 Membership Report (Type 0x16) + devlink_trap_stats_test "IGMP Version 2 Membership Report" \ + "igmp_v2_report" $MZ $h1 -c 1 -a own -b 01:00:5E:00:00:01 \ + -A 192.0.2.1 -B 244.0.0.1 -t ip proto=2,p=16 -p 100 -q +} + +igmp_v3_report_test() +{ + # IGMP (IP Protocol 2) Version 3 Membership Report (Type 0x22) + devlink_trap_stats_test "IGMP Version 3 Membership Report" \ + "igmp_v3_report" $MZ $h1 -c 1 -a own -b 01:00:5E:00:00:01 \ + -A 192.0.2.1 -B 244.0.0.1 -t ip proto=2,p=22 -p 100 -q +} + +igmp_v2_leave_test() +{ + # IGMP (IP Protocol 2) Version 2 Leave Group (Type 0x17) + devlink_trap_stats_test "IGMP Version 2 Leave Group" \ + "igmp_v2_leave" $MZ $h1 -c 1 -a own -b 01:00:5E:00:00:02 \ + -A 192.0.2.1 -B 224.0.0.2 -t ip proto=2,p=17 -p 100 -q +} + +mld_payload_get() +{ + local type=$1; shift + local p + + type=$(printf "%x" $type) + p=$(: + )"3A:"$( : Next Header - ICMPv6 + )"00:"$( : Hdr Ext Len + )"00:00:00:00:00:00:"$( : Options and Padding + )"$type:"$( : ICMPv6.type + )"00:"$( : ICMPv6.code + )"00:"$( : ICMPv6.checksum + ) + echo $p +} + +mld_query_test() +{ + # MLD Multicast Listener Query (Type 130) + devlink_trap_stats_test "MLD Multicast Listener Query" "mld_query" \ + $MZ $h1 -6 -c 1 -A fe80::1 -B ff02::1 \ + -t ip hop=1,next=0,payload=$(mld_payload_get 130) -p 100 -q +} + +mld_v1_report_test() +{ + # MLD Version 1 Multicast Listener Report (Type 131) + devlink_trap_stats_test "MLD Version 1 Multicast Listener Report" \ + "mld_v1_report" $MZ $h1 -6 -c 1 -A fe80::1 -B ff02::16 \ + -t ip hop=1,next=0,payload=$(mld_payload_get 131) -p 100 -q +} + +mld_v2_report_test() +{ + # MLD Version 2 Multicast Listener Report (Type 143) + devlink_trap_stats_test "MLD Version 2 Multicast Listener Report" \ + "mld_v2_report" $MZ $h1 -6 -c 1 -A fe80::1 -B ff02::16 \ + -t ip hop=1,next=0,payload=$(mld_payload_get 143) -p 100 -q +} + +mld_v1_done_test() +{ + # MLD Version 1 Multicast Listener Done (Type 132) + devlink_trap_stats_test "MLD Version 1 Multicast Listener Done" \ + "mld_v1_done" $MZ $h1 -6 -c 1 -A fe80::1 -B ff02::16 \ + -t ip hop=1,next=0,payload=$(mld_payload_get 132) -p 100 -q +} + +ipv4_dhcp_test() +{ + devlink_trap_stats_test "IPv4 DHCP Port 67" "ipv4_dhcp" \ + $MZ $h1 -c 1 -a own -b bcast -A 0.0.0.0 -B 255.255.255.255 \ + -t udp sp=68,dp=67 -p 100 -q + + devlink_trap_stats_test "IPv4 DHCP Port 68" "ipv4_dhcp" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) -A 192.0.2.1 \ + -B 255.255.255.255 -t udp sp=67,dp=68 -p 100 -q +} + +ipv6_dhcp_test() +{ + devlink_trap_stats_test "IPv6 DHCP Port 547" "ipv6_dhcp" \ + $MZ $h1 -6 -c 1 -A fe80::1 -B ff02::1:2 -t udp sp=546,dp=547 \ + -p 100 -q + + devlink_trap_stats_test "IPv6 DHCP Port 546" "ipv6_dhcp" \ + $MZ $h1 -6 -c 1 -A fe80::1 -B ff02::1:2 -t udp sp=547,dp=546 \ + -p 100 -q +} + +arp_request_test() +{ + devlink_trap_stats_test "ARP Request" "arp_request" \ + $MZ $h1 -c 1 -a own -b bcast -t arp request -p 100 -q +} + +arp_response_test() +{ + devlink_trap_stats_test "ARP Response" "arp_response" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) -t arp reply -p 100 -q +} + +icmpv6_header_get() +{ + local type=$1; shift + local p + + type=$(printf "%x" $type) + p=$(: + )"$type:"$( : ICMPv6.type + )"00:"$( : ICMPv6.code + )"00:"$( : ICMPv6.checksum + ) + echo $p +} + +ipv6_neigh_solicit_test() +{ + devlink_trap_stats_test "IPv6 Neighbour Solicitation" \ + "ipv6_neigh_solicit" $MZ $h1 -6 -c 1 \ + -A fe80::1 -B ff02::1:ff00:02 \ + -t ip hop=1,next=58,payload=$(icmpv6_header_get 135) -p 100 -q +} + +ipv6_neigh_advert_test() +{ + devlink_trap_stats_test "IPv6 Neighbour Advertisement" \ + "ipv6_neigh_advert" $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A fe80::1 -B 2001:db8:1::2 \ + -t ip hop=1,next=58,payload=$(icmpv6_header_get 136) -p 100 -q +} + +ipv4_bfd_test() +{ + devlink_trap_stats_test "IPv4 BFD Control - Port 3784" "ipv4_bfd" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 192.0.2.2 -t udp sp=49153,dp=3784 -p 100 -q + + devlink_trap_stats_test "IPv4 BFD Echo - Port 3785" "ipv4_bfd" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 192.0.2.2 -t udp sp=49153,dp=3785 -p 100 -q +} + +ipv6_bfd_test() +{ + devlink_trap_stats_test "IPv6 BFD Control - Port 3784" "ipv6_bfd" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::1 -B 2001:db8:1::2 \ + -t udp sp=49153,dp=3784 -p 100 -q + + devlink_trap_stats_test "IPv6 BFD Echo - Port 3785" "ipv6_bfd" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::1 -B 2001:db8:1::2 \ + -t udp sp=49153,dp=3785 -p 100 -q +} + +ipv4_ospf_test() +{ + devlink_trap_stats_test "IPv4 OSPF - Multicast" "ipv4_ospf" \ + $MZ $h1 -c 1 -a own -b 01:00:5e:00:00:05 \ + -A 192.0.2.1 -B 224.0.0.5 -t ip proto=89 -p 100 -q + + devlink_trap_stats_test "IPv4 OSPF - Unicast" "ipv4_ospf" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 192.0.2.2 -t ip proto=89 -p 100 -q +} + +ipv6_ospf_test() +{ + devlink_trap_stats_test "IPv6 OSPF - Multicast" "ipv6_ospf" \ + $MZ $h1 -6 -c 1 -a own -b 33:33:00:00:00:05 \ + -A fe80::1 -B ff02::5 -t ip next=89 -p 100 -q + + devlink_trap_stats_test "IPv6 OSPF - Unicast" "ipv6_ospf" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::1 -B 2001:db8:1::2 -t ip next=89 -p 100 -q +} + +ipv4_bgp_test() +{ + devlink_trap_stats_test "IPv4 BGP" "ipv4_bgp" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 192.0.2.2 -t tcp sp=54321,dp=179,flags=rst \ + -p 100 -q +} + +ipv6_bgp_test() +{ + devlink_trap_stats_test "IPv6 BGP" "ipv6_bgp" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::1 -B 2001:db8:1::2 \ + -t tcp sp=54321,dp=179,flags=rst -p 100 -q +} + +ipv4_vrrp_test() +{ + devlink_trap_stats_test "IPv4 VRRP" "ipv4_vrrp" \ + $MZ $h1 -c 1 -a own -b 01:00:5e:00:00:12 \ + -A 192.0.2.1 -B 224.0.0.18 -t ip proto=112 -p 100 -q +} + +ipv6_vrrp_test() +{ + devlink_trap_stats_test "IPv6 VRRP" "ipv6_vrrp" \ + $MZ $h1 -6 -c 1 -a own -b 33:33:00:00:00:12 \ + -A fe80::1 -B ff02::12 -t ip next=112 -p 100 -q +} + +ipv4_pim_test() +{ + devlink_trap_stats_test "IPv4 PIM - Multicast" "ipv4_pim" \ + $MZ $h1 -c 1 -a own -b 01:00:5e:00:00:0d \ + -A 192.0.2.1 -B 224.0.0.13 -t ip proto=103 -p 100 -q + + devlink_trap_stats_test "IPv4 PIM - Unicast" "ipv4_pim" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 192.0.2.2 -t ip proto=103 -p 100 -q +} + +ipv6_pim_test() +{ + devlink_trap_stats_test "IPv6 PIM - Multicast" "ipv6_pim" \ + $MZ $h1 -6 -c 1 -a own -b 33:33:00:00:00:0d \ + -A fe80::1 -B ff02::d -t ip next=103 -p 100 -q + + devlink_trap_stats_test "IPv6 PIM - Unicast" "ipv6_pim" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A fe80::1 -B 2001:db8:1::2 -t ip next=103 -p 100 -q +} + +uc_loopback_test() +{ + # Add neighbours to the fake destination IPs, so that the packets are + # routed in the device and not trapped due to an unresolved neighbour + # exception. + ip -4 neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud permanent \ + dev $rp1 + ip -6 neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud permanent \ + dev $rp1 + + devlink_trap_stats_test "IPv4 Unicast Loopback" "uc_loopback" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 192.0.2.3 -t udp sp=54321,dp=12345 -p 100 -q + + devlink_trap_stats_test "IPv6 Unicast Loopback" "uc_loopback" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::1 -B 2001:db8:1::3 -t udp sp=54321,dp=12345 \ + -p 100 -q + + ip -6 neigh del 2001:db8:1::3 dev $rp1 + ip -4 neigh del 192.0.2.3 dev $rp1 +} + +local_route_test() +{ + # Use a fake source IP to prevent the trap from being triggered twice + # when the router sends back a port unreachable message. + devlink_trap_stats_test "IPv4 Local Route" "local_route" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.3 -B 192.0.2.2 -t udp sp=54321,dp=12345 -p 100 -q + + devlink_trap_stats_test "IPv6 Local Route" "local_route" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::3 -B 2001:db8:1::2 -t udp sp=54321,sp=12345 \ + -p 100 -q +} + +external_route_test() +{ + # Add a dummy device through which the incoming packets should be + # routed. + ip link add name dummy10 up type dummy + ip address add 203.0.113.1/24 dev dummy10 + ip -6 address add 2001:db8:10::1/64 dev dummy10 + + devlink_trap_stats_test "IPv4 External Route" "external_route" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 203.0.113.2 -t udp sp=54321,dp=12345 -p 100 -q + + devlink_trap_stats_test "IPv6 External Route" "external_route" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::1 -B 2001:db8:10::2 -t udp sp=54321,sp=12345 \ + -p 100 -q + + ip -6 address del 2001:db8:10::1/64 dev dummy10 + ip address del 203.0.113.1/24 dev dummy10 + ip link del dev dummy10 +} + +ipv6_uc_dip_link_local_scope_test() +{ + # Add a dummy link-local prefix route to allow the packet to be routed. + ip -6 route add fe80:1::/64 dev $rp2 + + devlink_trap_stats_test \ + "IPv6 Unicast Destination IP With Link-Local Scope" \ + "ipv6_uc_dip_link_local_scope" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A fe80::1 -B fe80:1::2 -t udp sp=54321,sp=12345 \ + -p 100 -q + + ip -6 route del fe80:1::/64 dev $rp2 +} + +ipv4_router_alert_get() +{ + local p + + # https://en.wikipedia.org/wiki/IPv4#Options + p=$(: + )"94:"$( : Option Number + )"04:"$( : Option Length + )"00:00:"$( : Option Data + ) + echo $p +} + +ipv4_router_alert_test() +{ + devlink_trap_stats_test "IPv4 Router Alert" "ipv4_router_alert" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 198.51.100.3 \ + -t ip option=$(ipv4_router_alert_get) -p 100 -q +} + +ipv6_router_alert_get() +{ + local p + + # https://en.wikipedia.org/wiki/IPv6_packet#Hop-by-hop_options_and_destination_options + # https://tools.ietf.org/html/rfc2711#section-2.1 + p=$(: + )"11:"$( : Next Header - UDP + )"00:"$( : Hdr Ext Len + )"05:02:00:00:00:00:"$( : Option Data + ) + echo $p +} + +ipv6_router_alert_test() +{ + devlink_trap_stats_test "IPv6 Router Alert" "ipv6_router_alert" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A 2001:db8:1::1 -B 2001:db8:1::3 \ + -t ip next=0,payload=$(ipv6_router_alert_get) -p 100 -q +} + +ipv6_dip_all_nodes_test() +{ + devlink_trap_stats_test "IPv6 Destination IP \"All Nodes Address\"" \ + "ipv6_dip_all_nodes" \ + $MZ $h1 -6 -c 1 -a own -b 33:33:00:00:00:01 \ + -A 2001:db8:1::1 -B ff02::1 -t udp sp=12345,dp=54321 -p 100 -q +} + +ipv6_dip_all_routers_test() +{ + devlink_trap_stats_test "IPv6 Destination IP \"All Routers Address\"" \ + "ipv6_dip_all_routers" \ + $MZ $h1 -6 -c 1 -a own -b 33:33:00:00:00:02 \ + -A 2001:db8:1::1 -B ff02::2 -t udp sp=12345,dp=54321 -p 100 -q +} + +ipv6_router_solicit_test() +{ + devlink_trap_stats_test "IPv6 Router Solicitation" \ + "ipv6_router_solicit" \ + $MZ $h1 -6 -c 1 -a own -b 33:33:00:00:00:02 \ + -A fe80::1 -B ff02::2 \ + -t ip hop=1,next=58,payload=$(icmpv6_header_get 133) -p 100 -q +} + +ipv6_router_advert_test() +{ + devlink_trap_stats_test "IPv6 Router Advertisement" \ + "ipv6_router_advert" \ + $MZ $h1 -6 -c 1 -a own -b 33:33:00:00:00:01 \ + -A fe80::1 -B ff02::1 \ + -t ip hop=1,next=58,payload=$(icmpv6_header_get 134) -p 100 -q +} + +ipv6_redirect_test() +{ + devlink_trap_stats_test "IPv6 Redirect Message" \ + "ipv6_redirect" \ + $MZ $h1 -6 -c 1 -a own -b $(mac_get $rp1) \ + -A fe80::1 -B 2001:db8:1::2 \ + -t ip hop=1,next=58,payload=$(icmpv6_header_get 137) -p 100 -q +} + +ptp_event_test() +{ + mlxsw_only_on_spectrum 1 || return + + # PTP Sync (0) + devlink_trap_stats_test "PTP Time-Critical Event Message" "ptp_event" \ + $MZ $h1 -c 1 -a own -b 01:00:5e:00:01:81 \ + -A 192.0.2.1 -B 224.0.1.129 \ + -t udp sp=12345,dp=319,payload=10 -p 100 -q +} + +ptp_general_test() +{ + mlxsw_only_on_spectrum 1 || return + + # PTP Announce (b) + devlink_trap_stats_test "PTP General Message" "ptp_general" \ + $MZ $h1 -c 1 -a own -b 01:00:5e:00:01:81 \ + -A 192.0.2.1 -B 224.0.1.129 \ + -t udp sp=12345,dp=320,payload=1b -p 100 -q +} + +flow_action_sample_test() +{ + # Install a filter that samples every incoming packet. + tc qdisc add dev $rp1 clsact + tc filter add dev $rp1 ingress proto all pref 1 handle 101 matchall \ + skip_sw action sample rate 1 group 1 + + devlink_trap_stats_test "Flow Sampling" "flow_action_sample" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 198.51.100.1 -t udp sp=12345,dp=54321 -p 100 -q + + tc filter del dev $rp1 ingress proto all pref 1 handle 101 matchall + tc qdisc del dev $rp1 clsact +} + +flow_action_trap_test() +{ + # Install a filter that traps a specific flow. + tc qdisc add dev $rp1 clsact + tc filter add dev $rp1 ingress proto ip pref 1 handle 101 flower \ + skip_sw ip_proto udp src_port 12345 dst_port 54321 action trap + + devlink_trap_stats_test "Flow Trapping (Logging)" "flow_action_trap" \ + $MZ $h1 -c 1 -a own -b $(mac_get $rp1) \ + -A 192.0.2.1 -B 198.51.100.1 -t udp sp=12345,dp=54321 -p 100 -q + + tc filter del dev $rp1 ingress proto ip pref 1 handle 101 flower + tc qdisc del dev $rp1 clsact +} + +eapol_payload_get() +{ + local source_mac=$1; shift + local p + + p=$(: + )"01:80:C2:00:00:03:"$( : ETH daddr + )"$source_mac:"$( : ETH saddr + )"88:8E:"$( : ETH type + ) + echo $p +} + +eapol_test() +{ + local h1mac=$(mac_get $h1) + + devlink_trap_stats_test "EAPOL" "eapol" $MZ $h1 -c 1 \ + $(eapol_payload_get $h1mac) -p 100 -q +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l2_drops.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l2_drops.sh new file mode 100755 index 0000000000..8d4b2c6265 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l2_drops.sh @@ -0,0 +1,535 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap L2 drops functionality over mlxsw. Each registered L2 drop +# packet trap is tested to make sure it is triggered under the right +# conditions. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + source_mac_is_multicast_test + vlan_tag_mismatch_test + ingress_vlan_filter_test + ingress_stp_filter_test + port_list_is_empty_test + port_loopback_filter_test + locked_port_test +" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 +} + +h1_destroy() +{ + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 +} + +h2_destroy() +{ + simple_if_fini $h2 +} + +switch_create() +{ + ip link add dev br0 type bridge vlan_filtering 1 mcast_snooping 0 + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev $swp2 up + + tc qdisc add dev $swp2 clsact +} + +switch_destroy() +{ + tc qdisc del dev $swp2 clsact + + ip link set dev $swp2 down + ip link set dev $swp1 down + + ip link del dev br0 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +source_mac_is_multicast_test() +{ + local trap_name="source_mac_is_multicast" + local smac=01:02:03:04:05:06 + local mz_pid + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower src_mac $smac action drop + + $MZ $h1 -c 0 -p 100 -a $smac -b bcast -t ip -d 1msec -q & + mz_pid=$! + + RET=0 + + devlink_trap_drop_test $trap_name $swp2 101 + + log_test "Source MAC is multicast" + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 +} + +__vlan_tag_mismatch_test() +{ + local trap_name="vlan_tag_mismatch" + local dmac=de:ad:be:ef:13:37 + local opt=$1; shift + local mz_pid + + # Remove PVID flag. This should prevent untagged and prio-tagged + # packets from entering the bridge. + bridge vlan add vid 1 dev $swp1 untagged master + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower dst_mac $dmac action drop + + $MZ $h1 "$opt" -c 0 -p 100 -a own -b $dmac -t ip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp2 101 + + # Add PVID and make sure packets are no longer dropped. + bridge vlan add vid 1 dev $swp1 pvid untagged master + devlink_trap_action_set $trap_name "trap" + + devlink_trap_stats_idle_test $trap_name + check_err $? "Trap stats not idle when packets should not be dropped" + devlink_trap_group_stats_idle_test $(devlink_trap_group_get $trap_name) + check_err $? "Trap group stats not idle with when packets should not be dropped" + + tc_check_packets "dev $swp2 egress" 101 0 + check_fail $? "Packets not forwarded when should" + + devlink_trap_action_set $trap_name "drop" + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 +} + +vlan_tag_mismatch_untagged_test() +{ + RET=0 + + __vlan_tag_mismatch_test + + log_test "VLAN tag mismatch - untagged packets" +} + +vlan_tag_mismatch_vid_0_test() +{ + RET=0 + + __vlan_tag_mismatch_test "-Q 0" + + log_test "VLAN tag mismatch - prio-tagged packets" +} + +vlan_tag_mismatch_test() +{ + vlan_tag_mismatch_untagged_test + vlan_tag_mismatch_vid_0_test +} + +ingress_vlan_filter_test() +{ + local trap_name="ingress_vlan_filter" + local dmac=de:ad:be:ef:13:37 + local mz_pid + local vid=10 + + bridge vlan add vid $vid dev $swp2 master + + RET=0 + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower dst_mac $dmac action drop + + $MZ $h1 -Q $vid -c 0 -p 100 -a own -b $dmac -t ip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp2 101 + + # Add the VLAN on the bridge port and make sure packets are no longer + # dropped. + bridge vlan add vid $vid dev $swp1 master + devlink_trap_action_set $trap_name "trap" + + devlink_trap_stats_idle_test $trap_name + check_err $? "Trap stats not idle when packets should not be dropped" + devlink_trap_group_stats_idle_test $(devlink_trap_group_get $trap_name) + check_err $? "Trap group stats not idle with when packets should not be dropped" + + tc_check_packets "dev $swp2 egress" 101 0 + check_fail $? "Packets not forwarded when should" + + devlink_trap_action_set $trap_name "drop" + + log_test "Ingress VLAN filter" + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 + + bridge vlan del vid $vid dev $swp1 master + bridge vlan del vid $vid dev $swp2 master +} + +__ingress_stp_filter_test() +{ + local trap_name="ingress_spanning_tree_filter" + local dmac=de:ad:be:ef:13:37 + local state=$1; shift + local mz_pid + local vid=20 + + bridge vlan add vid $vid dev $swp2 master + bridge vlan add vid $vid dev $swp1 master + ip link set dev $swp1 type bridge_slave state $state + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower dst_mac $dmac action drop + + $MZ $h1 -Q $vid -c 0 -p 100 -a own -b $dmac -t ip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp2 101 + + # Change STP state to forwarding and make sure packets are no longer + # dropped. + ip link set dev $swp1 type bridge_slave state 3 + devlink_trap_action_set $trap_name "trap" + + devlink_trap_stats_idle_test $trap_name + check_err $? "Trap stats not idle when packets should not be dropped" + devlink_trap_group_stats_idle_test $(devlink_trap_group_get $trap_name) + check_err $? "Trap group stats not idle with when packets should not be dropped" + + tc_check_packets "dev $swp2 egress" 101 0 + check_fail $? "Packets not forwarded when should" + + devlink_trap_action_set $trap_name "drop" + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 + + bridge vlan del vid $vid dev $swp1 master + bridge vlan del vid $vid dev $swp2 master +} + +ingress_stp_filter_listening_test() +{ + local state=$1; shift + + RET=0 + + __ingress_stp_filter_test $state + + log_test "Ingress STP filter - listening state" +} + +ingress_stp_filter_learning_test() +{ + local state=$1; shift + + RET=0 + + __ingress_stp_filter_test $state + + log_test "Ingress STP filter - learning state" +} + +ingress_stp_filter_test() +{ + ingress_stp_filter_listening_test 1 + ingress_stp_filter_learning_test 2 +} + +port_list_is_empty_uc_test() +{ + local trap_name="port_list_is_empty" + local dmac=de:ad:be:ef:13:37 + local mz_pid + + # Disable unicast flooding on both ports, so that packets cannot egress + # any port. + ip link set dev $swp1 type bridge_slave flood off + ip link set dev $swp2 type bridge_slave flood off + + RET=0 + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower dst_mac $dmac action drop + + $MZ $h1 -c 0 -p 100 -a own -b $dmac -t ip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp2 101 + + # Allow packets to be flooded to one port. + ip link set dev $swp2 type bridge_slave flood on + devlink_trap_action_set $trap_name "trap" + + devlink_trap_stats_idle_test $trap_name + check_err $? "Trap stats not idle when packets should not be dropped" + devlink_trap_group_stats_idle_test $(devlink_trap_group_get $trap_name) + check_err $? "Trap group stats not idle with when packets should not be dropped" + + tc_check_packets "dev $swp2 egress" 101 0 + check_fail $? "Packets not forwarded when should" + + devlink_trap_action_set $trap_name "drop" + + log_test "Port list is empty - unicast" + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 + + ip link set dev $swp1 type bridge_slave flood on +} + +port_list_is_empty_mc_test() +{ + local trap_name="port_list_is_empty" + local dmac=01:00:5e:00:00:01 + local dip=239.0.0.1 + local mz_pid + + # Disable multicast flooding on both ports, so that packets cannot + # egress any port. We also need to flush IP addresses from the bridge + # in order to prevent packets from being flooded to the router port. + ip link set dev $swp1 type bridge_slave mcast_flood off + ip link set dev $swp2 type bridge_slave mcast_flood off + ip address flush dev br0 + + RET=0 + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower dst_mac $dmac action drop + + $MZ $h1 -c 0 -p 100 -a own -b $dmac -t ip -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp2 101 + + # Allow packets to be flooded to one port. + ip link set dev $swp2 type bridge_slave mcast_flood on + devlink_trap_action_set $trap_name "trap" + + devlink_trap_stats_idle_test $trap_name + check_err $? "Trap stats not idle when packets should not be dropped" + devlink_trap_group_stats_idle_test $(devlink_trap_group_get $trap_name) + check_err $? "Trap group stats not idle with when packets should not be dropped" + + tc_check_packets "dev $swp2 egress" 101 0 + check_fail $? "Packets not forwarded when should" + + devlink_trap_action_set $trap_name "drop" + + log_test "Port list is empty - multicast" + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 + + ip link set dev $swp1 type bridge_slave mcast_flood on +} + +port_list_is_empty_test() +{ + port_list_is_empty_uc_test + port_list_is_empty_mc_test +} + +port_loopback_filter_uc_test() +{ + local trap_name="port_loopback_filter" + local dmac=de:ad:be:ef:13:37 + local mz_pid + + # Make sure packets can only egress the input port. + ip link set dev $swp2 type bridge_slave flood off + + RET=0 + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 \ + flower dst_mac $dmac action drop + + $MZ $h1 -c 0 -p 100 -a own -b $dmac -t ip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp2 101 + + # Allow packets to be flooded. + ip link set dev $swp2 type bridge_slave flood on + devlink_trap_action_set $trap_name "trap" + + devlink_trap_stats_idle_test $trap_name + check_err $? "Trap stats not idle when packets should not be dropped" + devlink_trap_group_stats_idle_test $(devlink_trap_group_get $trap_name) + check_err $? "Trap group stats not idle with when packets should not be dropped" + + tc_check_packets "dev $swp2 egress" 101 0 + check_fail $? "Packets not forwarded when should" + + devlink_trap_action_set $trap_name "drop" + + log_test "Port loopback filter - unicast" + + devlink_trap_drop_cleanup $mz_pid $swp2 ip 1 101 +} + +port_loopback_filter_test() +{ + port_loopback_filter_uc_test +} + +locked_port_miss_test() +{ + local trap_name="locked_port" + local smac=00:11:22:33:44:55 + + bridge link set dev $swp1 learning off + bridge link set dev $swp1 locked on + + RET=0 + + devlink_trap_stats_check $trap_name $MZ $h1 -c 1 \ + -a $smac -b $(mac_get $h2) -A 192.0.2.1 -B 192.0.2.2 -p 100 -q + check_fail $? "Trap stats increased before setting action to \"trap\"" + + devlink_trap_action_set $trap_name "trap" + + devlink_trap_stats_check $trap_name $MZ $h1 -c 1 \ + -a $smac -b $(mac_get $h2) -A 192.0.2.1 -B 192.0.2.2 -p 100 -q + check_err $? "Trap stats did not increase when should" + + devlink_trap_action_set $trap_name "drop" + + devlink_trap_stats_check $trap_name $MZ $h1 -c 1 \ + -a $smac -b $(mac_get $h2) -A 192.0.2.1 -B 192.0.2.2 -p 100 -q + check_fail $? "Trap stats increased after setting action to \"drop\"" + + devlink_trap_action_set $trap_name "trap" + + bridge fdb replace $smac dev $swp1 master static vlan 1 + + devlink_trap_stats_check $trap_name $MZ $h1 -c 1 \ + -a $smac -b $(mac_get $h2) -A 192.0.2.1 -B 192.0.2.2 -p 100 -q + check_fail $? "Trap stats increased after adding an FDB entry" + + bridge fdb del $smac dev $swp1 master static vlan 1 + bridge link set dev $swp1 locked off + + devlink_trap_stats_check $trap_name $MZ $h1 -c 1 \ + -a $smac -b $(mac_get $h2) -A 192.0.2.1 -B 192.0.2.2 -p 100 -q + check_fail $? "Trap stats increased after unlocking port" + + log_test "Locked port - FDB miss" + + devlink_trap_action_set $trap_name "drop" + bridge link set dev $swp1 learning on +} + +locked_port_mismatch_test() +{ + local trap_name="locked_port" + local smac=00:11:22:33:44:55 + + bridge link set dev $swp1 learning off + bridge link set dev $swp1 locked on + + RET=0 + + bridge fdb replace $smac dev $swp2 master static vlan 1 + + devlink_trap_stats_check $trap_name $MZ $h1 -c 1 \ + -a $smac -b $(mac_get $h2) -A 192.0.2.1 -B 192.0.2.2 -p 100 -q + check_fail $? "Trap stats increased before setting action to \"trap\"" + + devlink_trap_action_set $trap_name "trap" + + devlink_trap_stats_check $trap_name $MZ $h1 -c 1 \ + -a $smac -b $(mac_get $h2) -A 192.0.2.1 -B 192.0.2.2 -p 100 -q + check_err $? "Trap stats did not increase when should" + + devlink_trap_action_set $trap_name "drop" + + devlink_trap_stats_check $trap_name $MZ $h1 -c 1 \ + -a $smac -b $(mac_get $h2) -A 192.0.2.1 -B 192.0.2.2 -p 100 -q + check_fail $? "Trap stats increased after setting action to \"drop\"" + + devlink_trap_action_set $trap_name "trap" + bridge link set dev $swp1 locked off + + devlink_trap_stats_check $trap_name $MZ $h1 -c 1 \ + -a $smac -b $(mac_get $h2) -A 192.0.2.1 -B 192.0.2.2 -p 100 -q + check_fail $? "Trap stats increased after unlocking port" + + bridge link set dev $swp1 locked on + bridge fdb replace $smac dev $swp1 master static vlan 1 + + devlink_trap_stats_check $trap_name $MZ $h1 -c 1 \ + -a $smac -b $(mac_get $h2) -A 192.0.2.1 -B 192.0.2.2 -p 100 -q + check_fail $? "Trap stats increased after replacing an FDB entry" + + bridge fdb del $smac dev $swp1 master static vlan 1 + devlink_trap_action_set $trap_name "drop" + + log_test "Locked port - FDB mismatch" + + bridge link set dev $swp1 locked off + bridge link set dev $swp1 learning on +} + +locked_port_test() +{ + locked_port_miss_test + locked_port_mismatch_test +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh new file mode 100755 index 0000000000..160891dcb4 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh @@ -0,0 +1,696 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap L3 drops functionality over mlxsw. Each registered L3 drop +# packet trap is tested to make sure it is triggered under the right +# conditions. + +# +---------------------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 192.0.2.1/24 | +# | | 2001:db8:1::1/64 | +# | | | +# | | default via 192.0.2.2 | +# | | default via 2001:db8:1::2 | +# +----|----------------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | + $rp1 | +# | 192.0.2.2/24 | +# | 2001:db8:1::2/64 | +# | | +# | 2001:db8:2::2/64 | +# | 198.51.100.2/24 | +# | + $rp2 | +# | | | +# +----|----------------------------------------------------------------------+ +# | +# +----|----------------------------+ +# | | default via 198.51.100.2 | +# | | default via 2001:db8:2::2 | +# | | | +# | | 2001:db8:2::1/64 | +# | | 198.51.100.1/24 | +# | + $h2 | +# | H2 (vrf) | +# +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + non_ip_test + uc_dip_over_mc_dmac_test + dip_is_loopback_test + sip_is_mc_test + sip_is_loopback_test + ip_header_corrupted_test + ipv4_sip_is_limited_bc_test + ipv6_mc_dip_reserved_scope_test + ipv6_mc_dip_interface_local_scope_test + blackhole_route_test + irif_disabled_test + erif_disabled_test + blackhole_nexthop_test +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 + ip -6 route add default vrf v$h1 nexthop via 2001:db8:1::2 +} + +h1_destroy() +{ + ip -6 route del default vrf v$h1 nexthop via 2001:db8:1::2 + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 $h2_ipv4/24 $h2_ipv6/64 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 + ip -6 route add default vrf v$h2 nexthop via 2001:db8:2::2 +} + +h2_destroy() +{ + ip -6 route del default vrf v$h2 nexthop via 2001:db8:2::2 + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + simple_if_fini $h2 $h2_ipv4/24 $h2_ipv6/64 +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + tc qdisc add dev $rp2 clsact + + __addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64 + __addr_add_del $rp2 add 198.51.100.2/24 2001:db8:2::2/64 +} + +router_destroy() +{ + __addr_add_del $rp2 del 198.51.100.2/24 2001:db8:2::2/64 + __addr_add_del $rp1 del 192.0.2.2/24 2001:db8:1::2/64 + + tc qdisc del dev $rp2 clsact + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + h1mac=$(mac_get $h1) + rp1mac=$(mac_get $rp1) + + h1_ipv4=192.0.2.1 + h2_ipv4=198.51.100.1 + h1_ipv6=2001:db8:1::1 + h2_ipv6=2001:db8:2::1 + + vrf_prepare + forwarding_enable + + h1_create + h2_create + + router_create +} + +cleanup() +{ + pre_cleanup + + router_destroy + + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +ping_check() +{ + trap_name=$1; shift + + devlink_trap_action_set $trap_name "trap" + ping_do $h1 $h2_ipv4 + check_err $? "Packets that should not be trapped were trapped" + devlink_trap_action_set $trap_name "drop" +} + +non_ip_test() +{ + local trap_name="non_ip" + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol ip pref 1 handle 101 \ + flower dst_ip $h2_ipv4 action drop + + # Generate non-IP packets to the router + $MZ $h1 -c 0 -p 100 -d 1msec -B $h2_ipv4 -q "$rp1mac $h1mac \ + 00:00 de:ad:be:ef" & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "Non IP" + + devlink_trap_drop_cleanup $mz_pid $rp2 "ip" 1 101 +} + +__uc_dip_over_mc_dmac_test() +{ + local desc=$1; shift + local proto=$1; shift + local dip=$1; shift + local flags=${1:-""}; shift + local trap_name="uc_dip_over_mc_dmac" + local dmac=01:02:03:04:05:06 + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \ + flower ip_proto udp src_port 54321 dst_port 12345 action drop + + # Generate IP packets with a unicast IP and a multicast destination MAC + $MZ $h1 $flags -t udp "sp=54321,dp=12345" -c 0 -p 100 -b $dmac \ + -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "Unicast destination IP over multicast destination MAC: $desc" + + devlink_trap_drop_cleanup $mz_pid $rp2 $proto 1 101 +} + +uc_dip_over_mc_dmac_test() +{ + __uc_dip_over_mc_dmac_test "IPv4" "ip" $h2_ipv4 + __uc_dip_over_mc_dmac_test "IPv6" "ipv6" $h2_ipv6 "-6" +} + +__sip_is_loopback_test() +{ + local desc=$1; shift + local proto=$1; shift + local sip=$1; shift + local dip=$1; shift + local flags=${1:-""}; shift + local trap_name="sip_is_loopback_address" + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \ + flower src_ip $sip action drop + + # Generate packets with loopback source IP + $MZ $h1 $flags -t udp "sp=54321,dp=12345" -c 0 -p 100 -A $sip \ + -b $rp1mac -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "Source IP is loopback address: $desc" + + devlink_trap_drop_cleanup $mz_pid $rp2 $proto 1 101 +} + +sip_is_loopback_test() +{ + __sip_is_loopback_test "IPv4" "ip" "127.0.0.0/8" $h2_ipv4 + __sip_is_loopback_test "IPv6" "ipv6" "::1" $h2_ipv6 "-6" +} + +__dip_is_loopback_test() +{ + local desc=$1; shift + local proto=$1; shift + local dip=$1; shift + local flags=${1:-""}; shift + local trap_name="dip_is_loopback_address" + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \ + flower dst_ip $dip action drop + + # Generate packets with loopback destination IP + $MZ $h1 $flags -t udp "sp=54321,dp=12345" -c 0 -p 100 -b $rp1mac \ + -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "Destination IP is loopback address: $desc" + + devlink_trap_drop_cleanup $mz_pid $rp2 $proto 1 101 +} + +dip_is_loopback_test() +{ + __dip_is_loopback_test "IPv4" "ip" "127.0.0.0/8" + __dip_is_loopback_test "IPv6" "ipv6" "::1" "-6" +} + +__sip_is_mc_test() +{ + local desc=$1; shift + local proto=$1; shift + local sip=$1; shift + local dip=$1; shift + local flags=${1:-""}; shift + local trap_name="sip_is_mc" + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \ + flower src_ip $sip action drop + + # Generate packets with multicast source IP + $MZ $h1 $flags -t udp "sp=54321,dp=12345" -c 0 -p 100 -A $sip \ + -b $rp1mac -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "Source IP is multicast: $desc" + + devlink_trap_drop_cleanup $mz_pid $rp2 $proto 1 101 +} + +sip_is_mc_test() +{ + __sip_is_mc_test "IPv4" "ip" "239.1.1.1" $h2_ipv4 + __sip_is_mc_test "IPv6" "ipv6" "FF02::2" $h2_ipv6 "-6" +} + +ipv4_sip_is_limited_bc_test() +{ + local trap_name="ipv4_sip_is_limited_bc" + local sip=255.255.255.255 + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol ip pref 1 handle 101 \ + flower src_ip $sip action drop + + # Generate packets with limited broadcast source IP + $MZ $h1 -t udp "sp=54321,dp=12345" -c 0 -p 100 -A $sip -b $rp1mac \ + -B $h2_ipv4 -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "IPv4 source IP is limited broadcast" + + devlink_trap_drop_cleanup $mz_pid $rp2 "ip" 1 101 +} + +ipv4_payload_get() +{ + local ipver=$1; shift + local ihl=$1; shift + local checksum=$1; shift + + p=$(: + )"08:00:"$( : ETH type + )"$ipver"$( : IP version + )"$ihl:"$( : IHL + )"00:"$( : IP TOS + )"00:F4:"$( : IP total length + )"00:00:"$( : IP identification + )"20:00:"$( : IP flags + frag off + )"30:"$( : IP TTL + )"01:"$( : IP proto + )"$checksum:"$( : IP header csum + )"$h1_ipv4:"$( : IP saddr + )"$h2_ipv4:"$( : IP daddr + ) + echo $p +} + +__ipv4_header_corrupted_test() +{ + local desc=$1; shift + local ipver=$1; shift + local ihl=$1; shift + local checksum=$1; shift + local trap_name="ip_header_corrupted" + local payload + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol ip pref 1 handle 101 \ + flower dst_ip $h2_ipv4 action drop + + payload=$(ipv4_payload_get $ipver $ihl $checksum) + + # Generate packets with corrupted IP header + $MZ $h1 -c 0 -d 1msec -a $h1mac -b $rp1mac -q p=$payload & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "IP header corrupted: $desc: IPv4" + + devlink_trap_drop_cleanup $mz_pid $rp2 "ip" 1 101 +} + +ipv6_payload_get() +{ + local ipver=$1; shift + + p=$(: + )"86:DD:"$( : ETH type + )"$ipver"$( : IP version + )"0:0:"$( : Traffic class + )"0:00:00:"$( : Flow label + )"00:00:"$( : Payload length + )"01:"$( : Next header + )"04:"$( : Hop limit + )"$h1_ipv6:"$( : IP saddr + )"$h2_ipv6:"$( : IP daddr + ) + echo $p +} + +__ipv6_header_corrupted_test() +{ + local desc=$1; shift + local ipver=$1; shift + local trap_name="ip_header_corrupted" + local payload + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol ip pref 1 handle 101 \ + flower dst_ip $h2_ipv4 action drop + + payload=$(ipv6_payload_get $ipver) + + # Generate packets with corrupted IP header + $MZ $h1 -c 0 -d 1msec -a $h1mac -b $rp1mac -q p=$payload & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "IP header corrupted: $desc: IPv6" + + devlink_trap_drop_cleanup $mz_pid $rp2 "ip" 1 101 +} + +ip_header_corrupted_test() +{ + # Each test uses one wrong value. The three values below are correct. + local ipv="4" + local ihl="5" + local checksum="00:F4" + + __ipv4_header_corrupted_test "wrong IP version" 5 $ihl $checksum + __ipv4_header_corrupted_test "wrong IHL" $ipv 4 $checksum + __ipv4_header_corrupted_test "wrong checksum" $ipv $ihl "00:00" + __ipv6_header_corrupted_test "wrong IP version" 5 +} + +ipv6_mc_dip_reserved_scope_test() +{ + local trap_name="ipv6_mc_dip_reserved_scope" + local dip=FF00:: + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol ipv6 pref 1 handle 101 \ + flower dst_ip $dip action drop + + # Generate packets with reserved scope destination IP + $MZ $h1 -6 -t udp "sp=54321,dp=12345" -c 0 -p 100 -b \ + "33:33:00:00:00:00" -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "IPv6 multicast destination IP reserved scope" + + devlink_trap_drop_cleanup $mz_pid $rp2 "ipv6" 1 101 +} + +ipv6_mc_dip_interface_local_scope_test() +{ + local trap_name="ipv6_mc_dip_interface_local_scope" + local dip=FF01:: + local mz_pid + + RET=0 + + ping_check $trap_name + + tc filter add dev $rp2 egress protocol ipv6 pref 1 handle 101 \ + flower dst_ip $dip action drop + + # Generate packets with interface local scope destination IP + $MZ $h1 -6 -t udp "sp=54321,dp=12345" -c 0 -p 100 -b \ + "33:33:00:00:00:00" -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + + log_test "IPv6 multicast destination IP interface-local scope" + + devlink_trap_drop_cleanup $mz_pid $rp2 "ipv6" 1 101 +} + +__blackhole_route_test() +{ + local flags=$1; shift + local subnet=$1; shift + local proto=$1; shift + local dip=$1; shift + local ip_proto=${1:-"icmp"}; shift + local trap_name="blackhole_route" + local mz_pid + + RET=0 + + ping_check $trap_name + + ip -$flags route add blackhole $subnet + tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \ + flower skip_hw dst_ip $dip ip_proto $ip_proto action drop + + # Generate packets to the blackhole route + $MZ $h1 -$flags -t udp "sp=54321,dp=12345" -c 0 -p 100 -b $rp1mac \ + -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + log_test "Blackhole route: IPv$flags" + + devlink_trap_drop_cleanup $mz_pid $rp2 $proto 1 101 + ip -$flags route del blackhole $subnet +} + +blackhole_route_test() +{ + __blackhole_route_test "4" "198.51.100.0/30" "ip" $h2_ipv4 + __blackhole_route_test "6" "2001:db8:2::/120" "ipv6" $h2_ipv6 "icmpv6" +} + +irif_disabled_test() +{ + local trap_name="irif_disabled" + local t0_packets t0_bytes + local t1_packets t1_bytes + local mz_pid + + RET=0 + + ping_check $trap_name + + devlink_trap_action_set $trap_name "trap" + + # When RIF of a physical port ("Sub-port RIF") is destroyed, we first + # block the STP of the {Port, VLAN} so packets cannot get into the RIF. + # Using bridge enables us to see this trap because when bridge is + # destroyed, there is a small time window that packets can go into the + # RIF, while it is disabled. + ip link add dev br0 type bridge + ip link set dev $rp1 master br0 + ip address flush dev $rp1 + __addr_add_del br0 add 192.0.2.2/24 + ip li set dev br0 up + + t0_packets=$(devlink_trap_rx_packets_get $trap_name) + t0_bytes=$(devlink_trap_rx_bytes_get $trap_name) + + # Generate packets to h2 through br0 RIF that will be removed later + $MZ $h1 -t udp "sp=54321,dp=12345" -c 0 -p 100 -a own -b $rp1mac \ + -B $h2_ipv4 -q & + mz_pid=$! + + # Wait before removing br0 RIF to allow packets to go into the bridge. + sleep 1 + + # Flushing address will dismantle the RIF + ip address flush dev br0 + + t1_packets=$(devlink_trap_rx_packets_get $trap_name) + t1_bytes=$(devlink_trap_rx_bytes_get $trap_name) + + if [[ $t0_packets -eq $t1_packets && $t0_bytes -eq $t1_bytes ]]; then + check_err 1 "Trap stats idle when packets should be trapped" + fi + + log_test "Ingress RIF disabled" + + kill $mz_pid && wait $mz_pid &> /dev/null + ip link set dev $rp1 nomaster + __addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64 + ip link del dev br0 type bridge + devlink_trap_action_set $trap_name "drop" +} + +erif_disabled_test() +{ + local trap_name="erif_disabled" + local t0_packets t0_bytes + local t1_packets t1_bytes + local mz_pid + + RET=0 + + ping_check $trap_name + + devlink_trap_action_set $trap_name "trap" + ip link add dev br0 type bridge + ip add flush dev $rp1 + ip link set dev $rp1 master br0 + __addr_add_del br0 add 192.0.2.2/24 + ip link set dev br0 up + + t0_packets=$(devlink_trap_rx_packets_get $trap_name) + t0_bytes=$(devlink_trap_rx_bytes_get $trap_name) + + rp2mac=$(mac_get $rp2) + + # Generate packets that should go out through br0 RIF that will be + # removed later + $MZ $h2 -t udp "sp=54321,dp=12345" -c 0 -p 100 -a own -b $rp2mac \ + -B 192.0.2.1 -q & + mz_pid=$! + + sleep 5 + # Unlinking the port from the bridge will disable the RIF associated + # with br0 as it is no longer an upper of any mlxsw port. + ip link set dev $rp1 nomaster + + t1_packets=$(devlink_trap_rx_packets_get $trap_name) + t1_bytes=$(devlink_trap_rx_bytes_get $trap_name) + + if [[ $t0_packets -eq $t1_packets && $t0_bytes -eq $t1_bytes ]]; then + check_err 1 "Trap stats idle when packets should be trapped" + fi + + log_test "Egress RIF disabled" + + kill $mz_pid && wait $mz_pid &> /dev/null + __addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64 + ip link del dev br0 type bridge + devlink_trap_action_set $trap_name "drop" +} + +__blackhole_nexthop_test() +{ + local flags=$1; shift + local subnet=$1; shift + local proto=$1; shift + local dip=$1; shift + local trap_name="blackhole_nexthop" + local mz_pid + + RET=0 + + ip -$flags nexthop add id 1 blackhole + ip -$flags route add $subnet nhid 1 + tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \ + flower skip_hw dst_ip $dip ip_proto udp action drop + + # Generate packets to the blackhole nexthop + $MZ $h1 -$flags -t udp "sp=54321,dp=12345" -c 0 -p 100 -b $rp1mac \ + -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + log_test "Blackhole nexthop: IPv$flags" + + devlink_trap_drop_cleanup $mz_pid $rp2 $proto 1 101 + ip -$flags route del $subnet + ip -$flags nexthop del id 1 +} + +blackhole_nexthop_test() +{ + __blackhole_nexthop_test "4" "198.51.100.0/30" "ip" $h2_ipv4 + __blackhole_nexthop_test "6" "2001:db8:2::/120" "ipv6" $h2_ipv6 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh new file mode 100755 index 0000000000..190c1b6b53 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh @@ -0,0 +1,583 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap L3 exceptions functionality over mlxsw. +# Check all exception traps to make sure they are triggered under the right +# conditions. + +# +---------------------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 192.0.2.1/24 | +# | | 2001:db8:1::1/64 | +# | | | +# | | default via 192.0.2.2 | +# | | default via 2001:db8:1::2 | +# +----|----------------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | + $rp1 | +# | 192.0.2.2/24 | +# | 2001:db8:1::2/64 | +# | | +# | 2001:db8:2::2/64 | +# | 198.51.100.2/24 | +# | + $rp2 | +# | | | +# +----|----------------------------------------------------------------------+ +# | +# +----|----------------------------+ +# | | default via 198.51.100.2 | +# | | default via 2001:db8:2::2 | +# | | | +# | | 2001:db8:2::1/64 | +# | | 198.51.100.1/24 | +# | + $h2 | +# | H2 (vrf) | +# +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + mtu_value_is_too_small_test + ttl_value_is_too_small_test + mc_reverse_path_forwarding_test + reject_route_test + unresolved_neigh_test + ipv4_lpm_miss_test + ipv6_lpm_miss_test +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +require_command $MCD +require_command $MC_CLI +table_name=selftests + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 + ip -6 route add default vrf v$h1 nexthop via 2001:db8:1::2 + + tc qdisc add dev $h1 clsact +} + +h1_destroy() +{ + tc qdisc del dev $h1 clsact + + ip -6 route del default vrf v$h1 nexthop via 2001:db8:1::2 + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/24 2001:db8:2::1/64 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 + ip -6 route add default vrf v$h2 nexthop via 2001:db8:2::2 +} + +h2_destroy() +{ + ip -6 route del default vrf v$h2 nexthop via 2001:db8:2::2 + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + simple_if_fini $h2 198.51.100.1/24 2001:db8:2::1/64 +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + tc qdisc add dev $rp2 clsact + + __addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64 + __addr_add_del $rp2 add 198.51.100.2/24 2001:db8:2::2/64 +} + +router_destroy() +{ + __addr_add_del $rp2 del 198.51.100.2/24 2001:db8:2::2/64 + __addr_add_del $rp1 del 192.0.2.2/24 2001:db8:1::2/64 + + tc qdisc del dev $rp2 clsact + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + rp1mac=$(mac_get $rp1) + + start_mcd + + vrf_prepare + forwarding_enable + + h1_create + h2_create + + router_create +} + +cleanup() +{ + pre_cleanup + + router_destroy + + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup + + kill_mcd +} + +ping_check() +{ + ping_do $h1 198.51.100.1 + check_err $? "Packets that should not be trapped were trapped" +} + +trap_action_check() +{ + local trap_name=$1; shift + local expected_action=$1; shift + + action=$(devlink_trap_action_get $trap_name) + if [ "$action" != $expected_action ]; then + check_err 1 "Trap $trap_name has wrong action: $action" + fi +} + +mtu_value_is_too_small_test() +{ + local trap_name="mtu_value_is_too_small" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + # type - Destination Unreachable + # code - Fragmentation Needed and Don't Fragment was Set + tc filter add dev $h1 ingress protocol ip pref 1 handle 101 \ + flower skip_hw ip_proto icmp type 3 code 4 action pass + + mtu_set $rp2 1300 + + # Generate IP packets bigger than router's MTU with don't fragment + # flag on. + $MZ $h1 -t udp "sp=54321,dp=12345,df" -p 1400 -c 0 -d 1msec -b $rp1mac \ + -B 198.51.100.1 -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets_hitting "dev $h1 ingress" 101 + check_err $? "Packets were not received to h1" + + log_test "MTU value is too small" + + mtu_restore $rp2 + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $h1 ingress protocol ip pref 1 handle 101 flower +} + +__ttl_value_is_too_small_test() +{ + local ttl_val=$1; shift + local trap_name="ttl_value_is_too_small" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + # type - Time Exceeded + # code - Time to Live exceeded in Transit + tc filter add dev $h1 ingress protocol ip pref 1 handle 101 \ + flower skip_hw ip_proto icmp type 11 code 0 action pass + + # Generate IP packets with small TTL + $MZ $h1 -t udp "ttl=$ttl_val,sp=54321,dp=12345" -c 0 -d 1msec \ + -b $rp1mac -B 198.51.100.1 -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets_hitting "dev $h1 ingress" 101 + check_err $? "Packets were not received to h1" + + log_test "TTL value is too small: TTL=$ttl_val" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $h1 ingress protocol ip pref 1 handle 101 flower +} + +ttl_value_is_too_small_test() +{ + __ttl_value_is_too_small_test 0 + __ttl_value_is_too_small_test 1 +} + +start_mcd() +{ + SMCROUTEDIR="$(mktemp -d)" + for ((i = 1; i <= $NUM_NETIFS; ++i)); do + echo "phyint ${NETIFS[p$i]} enable" >> \ + $SMCROUTEDIR/$table_name.conf + done + + $MCD -N -I $table_name -f $SMCROUTEDIR/$table_name.conf \ + -P $SMCROUTEDIR/$table_name.pid +} + +kill_mcd() +{ + pkill $MCD + rm -rf $SMCROUTEDIR +} + +__mc_reverse_path_forwarding_test() +{ + local desc=$1; shift + local src_ip=$1; shift + local dst_ip=$1; shift + local dst_mac=$1; shift + local proto=$1; shift + local flags=${1:-""}; shift + local trap_name="mc_reverse_path_forwarding" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \ + flower dst_ip $dst_ip ip_proto udp action drop + + $MC_CLI -I $table_name add $rp1 $src_ip $dst_ip $rp2 + + # Generate packets to multicast address. + $MZ $h2 $flags -t udp "sp=54321,dp=12345" -c 0 -p 128 \ + -a 00:11:22:33:44:55 -b $dst_mac \ + -A $src_ip -B $dst_ip -q & + + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $rp2 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "Multicast reverse path forwarding: $desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $rp2 egress protocol $proto pref 1 handle 101 flower +} + +mc_reverse_path_forwarding_test() +{ + __mc_reverse_path_forwarding_test "IPv4" "192.0.2.1" "225.1.2.3" \ + "01:00:5e:01:02:03" "ip" + __mc_reverse_path_forwarding_test "IPv6" "2001:db8:1::1" "ff0e::3" \ + "33:33:00:00:00:03" "ipv6" "-6" +} + +__reject_route_test() +{ + local desc=$1; shift + local dst_ip=$1; shift + local proto=$1; shift + local ip_proto=$1; shift + local type=$1; shift + local code=$1; shift + local unreachable=$1; shift + local flags=${1:-""}; shift + local trap_name="reject_route" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + tc filter add dev $h1 ingress protocol $proto pref 1 handle 101 flower \ + skip_hw ip_proto $ip_proto type $type code $code action pass + + ip route add unreachable $unreachable + + # Generate pacekts to h2. The destination IP is unreachable. + $MZ $flags $h1 -t udp "sp=54321,dp=12345" -c 0 -d 1msec -b $rp1mac \ + -B $dst_ip -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets_hitting "dev $h1 ingress" 101 + check_err $? "ICMP packet was not received to h1" + + log_test "Reject route: $desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + ip route del unreachable $unreachable + tc filter del dev $h1 ingress protocol $proto pref 1 handle 101 flower +} + +reject_route_test() +{ + # type - Destination Unreachable + # code - Host Unreachable + __reject_route_test "IPv4" 198.51.100.1 "ip" "icmp" 3 1 \ + "198.51.100.0/26" + # type - Destination Unreachable + # code - No Route + __reject_route_test "IPv6" 2001:db8:2::1 "ipv6" "icmpv6" 1 0 \ + "2001:db8:2::0/66" "-6" +} + +__host_miss_test() +{ + local desc=$1; shift + local dip=$1; shift + local trap_name="unresolved_neigh" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + ip neigh flush dev $rp2 + + t0_packets=$(devlink_trap_rx_packets_get $trap_name) + + # Generate packets to h2 (will incur a unresolved neighbor). + # The ping should pass and devlink counters should be increased. + ping_do $h1 $dip + check_err $? "ping failed: $desc" + + t1_packets=$(devlink_trap_rx_packets_get $trap_name) + + if [[ $t0_packets -eq $t1_packets ]]; then + check_err 1 "Trap counter did not increase" + fi + + log_test "Unresolved neigh: host miss: $desc" +} + +__invalid_nexthop_test() +{ + local desc=$1; shift + local dip=$1; shift + local extra_add=$1; shift + local subnet=$1; shift + local via_add=$1; shift + local trap_name="unresolved_neigh" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + ip address add $extra_add/$subnet dev $h2 + + # Check that correct route does not trigger unresolved_neigh + ip $flags route add $dip via $extra_add dev $rp2 + + # Generate packets in order to discover all neighbours. + # Without it, counters of unresolved_neigh will be increased + # during neighbours discovery and the check below will fail + # for a wrong reason + ping_do $h1 $dip + + t0_packets=$(devlink_trap_rx_packets_get $trap_name) + ping_do $h1 $dip + t1_packets=$(devlink_trap_rx_packets_get $trap_name) + + if [[ $t0_packets -ne $t1_packets ]]; then + check_err 1 "Trap counter increased when it should not" + fi + + ip $flags route del $dip via $extra_add dev $rp2 + + # Check that route to nexthop that does not exist trigger + # unresolved_neigh + ip $flags route add $dip via $via_add dev $h2 + + t0_packets=$(devlink_trap_rx_packets_get $trap_name) + ping_do $h1 $dip + t1_packets=$(devlink_trap_rx_packets_get $trap_name) + + if [[ $t0_packets -eq $t1_packets ]]; then + check_err 1 "Trap counter did not increase" + fi + + ip $flags route del $dip via $via_add dev $h2 + ip address del $extra_add/$subnet dev $h2 + log_test "Unresolved neigh: nexthop does not exist: $desc" +} + +__invalid_nexthop_bucket_test() +{ + local desc=$1; shift + local dip=$1; shift + local via_add=$1; shift + local trap_name="unresolved_neigh" + + RET=0 + + # Check that route to nexthop that does not exist triggers + # unresolved_neigh + ip nexthop add id 1 via $via_add dev $rp2 + ip nexthop add id 10 group 1 type resilient buckets 32 + ip route add $dip nhid 10 + + t0_packets=$(devlink_trap_rx_packets_get $trap_name) + ping_do $h1 $dip + t1_packets=$(devlink_trap_rx_packets_get $trap_name) + + if [[ $t0_packets -eq $t1_packets ]]; then + check_err 1 "Trap counter did not increase" + fi + + ip route del $dip nhid 10 + ip nexthop del id 10 + ip nexthop del id 1 + log_test "Unresolved neigh: nexthop bucket does not exist: $desc" +} + +unresolved_neigh_test() +{ + __host_miss_test "IPv4" 198.51.100.1 + __host_miss_test "IPv6" 2001:db8:2::1 + __invalid_nexthop_test "IPv4" 198.51.100.1 198.51.100.3 24 198.51.100.4 + __invalid_nexthop_test "IPv6" 2001:db8:2::1 2001:db8:2::3 64 \ + 2001:db8:2::4 + __invalid_nexthop_bucket_test "IPv4" 198.51.100.1 198.51.100.4 + __invalid_nexthop_bucket_test "IPv6" 2001:db8:2::1 2001:db8:2::4 +} + +vrf_without_routes_create() +{ + # VRF creating makes the links to be down and then up again. + # By default, IPv6 address is not saved after link becomes down. + # Save IPv6 address using sysctl configuration. + sysctl_set net.ipv6.conf.$rp1.keep_addr_on_down 1 + sysctl_set net.ipv6.conf.$rp2.keep_addr_on_down 1 + + ip link add dev vrf1 type vrf table 101 + ip link set dev $rp1 master vrf1 + ip link set dev $rp2 master vrf1 + ip link set dev vrf1 up + + # Wait for rp1 and rp2 to be up + setup_wait +} + +vrf_without_routes_destroy() +{ + ip link set dev $rp1 nomaster + ip link set dev $rp2 nomaster + ip link del dev vrf1 + + sysctl_restore net.ipv6.conf.$rp2.keep_addr_on_down + sysctl_restore net.ipv6.conf.$rp1.keep_addr_on_down + + # Wait for interfaces to be up + setup_wait +} + +ipv4_lpm_miss_test() +{ + local trap_name="ipv4_lpm_miss" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + # Create a VRF without a default route + vrf_without_routes_create + + # Generate packets through a VRF without a matching route. + $MZ $h1 -t udp "sp=54321,dp=12345" -c 0 -d 1msec -b $rp1mac \ + -B 203.0.113.1 -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + log_test "LPM miss: IPv4" + + kill $mz_pid && wait $mz_pid &> /dev/null + vrf_without_routes_destroy +} + +ipv6_lpm_miss_test() +{ + local trap_name="ipv6_lpm_miss" + local expected_action="trap" + local mz_pid + + RET=0 + + ping_check $trap_name + trap_action_check $trap_name $expected_action + + # Create a VRF without a default route + vrf_without_routes_create + + # Generate packets through a VRF without a matching route. + $MZ -6 $h1 -t udp "sp=54321,dp=12345" -c 0 -d 1msec -b $rp1mac \ + -B 2001:db8::1 -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + log_test "LPM miss: IPv6" + + kill $mz_pid && wait $mz_pid &> /dev/null + vrf_without_routes_destroy +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh new file mode 100755 index 0000000000..0bd5ffc218 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh @@ -0,0 +1,369 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap policer functionality over mlxsw. + +# +---------------------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 192.0.2.1/24 | +# | | | +# | | default via 192.0.2.2 | +# +----|----------------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | + $rp1 | +# | 192.0.2.2/24 | +# | | +# | 198.51.100.2/24 | +# | + $rp2 | +# | | | +# +----|----------------------------------------------------------------------+ +# | +# +----|----------------------------+ +# | | default via 198.51.100.2 | +# | | | +# | | 198.51.100.1/24 | +# | + $h2 | +# | H2 (vrf) | +# +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + rate_limits_test + burst_limits_test + rate_test + burst_test +" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 + mtu_set $h1 10000 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + mtu_restore $h1 + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/24 + mtu_set $h2 10000 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 +} + +h2_destroy() +{ + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + mtu_restore $h2 + simple_if_fini $h2 198.51.100.1/24 +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + __addr_add_del $rp1 add 192.0.2.2/24 + __addr_add_del $rp2 add 198.51.100.2/24 + mtu_set $rp1 10000 + mtu_set $rp2 10000 + + ip -4 route add blackhole 198.51.100.100 + + devlink trap set $DEVLINK_DEV trap blackhole_route action trap +} + +router_destroy() +{ + devlink trap set $DEVLINK_DEV trap blackhole_route action drop + + ip -4 route del blackhole 198.51.100.100 + + mtu_restore $rp2 + mtu_restore $rp1 + __addr_add_del $rp2 del 198.51.100.2/24 + __addr_add_del $rp1 del 192.0.2.2/24 + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + rp1_mac=$(mac_get $rp1) + + vrf_prepare + + h1_create + h2_create + + router_create +} + +cleanup() +{ + pre_cleanup + + router_destroy + + h2_destroy + h1_destroy + + vrf_cleanup + + # Reload to ensure devlink-trap settings are back to default. + devlink_reload +} + +rate_limits_test() +{ + RET=0 + + devlink trap policer set $DEVLINK_DEV policer 1 rate 0 &> /dev/null + check_fail $? "Policer rate was changed to rate lower than limit" + devlink trap policer set $DEVLINK_DEV policer 1 \ + rate 2000000001 &> /dev/null + check_fail $? "Policer rate was changed to rate higher than limit" + + devlink trap policer set $DEVLINK_DEV policer 1 rate 1 + check_err $? "Failed to set policer rate to minimum" + devlink trap policer set $DEVLINK_DEV policer 1 rate 2000000000 + check_err $? "Failed to set policer rate to maximum" + + log_test "Trap policer rate limits" +} + +burst_limits_test() +{ + RET=0 + + devlink trap policer set $DEVLINK_DEV policer 1 burst 0 &> /dev/null + check_fail $? "Policer burst size was changed to 0" + devlink trap policer set $DEVLINK_DEV policer 1 burst 17 &> /dev/null + check_fail $? "Policer burst size was changed to burst size that is not power of 2" + devlink trap policer set $DEVLINK_DEV policer 1 burst 8 &> /dev/null + check_fail $? "Policer burst size was changed to burst size lower than limit" + devlink trap policer set $DEVLINK_DEV policer 1 \ + burst $((2**25)) &> /dev/null + check_fail $? "Policer burst size was changed to burst size higher than limit" + + devlink trap policer set $DEVLINK_DEV policer 1 burst 16 + check_err $? "Failed to set policer burst size to minimum" + devlink trap policer set $DEVLINK_DEV policer 1 burst $((2**24)) + check_err $? "Failed to set policer burst size to maximum" + + log_test "Trap policer burst size limits" +} + +trap_rate_get() +{ + local t0 t1 + + t0=$(devlink_trap_rx_packets_get blackhole_route) + sleep 10 + t1=$(devlink_trap_rx_packets_get blackhole_route) + + echo $(((t1 - t0) / 10)) +} + +policer_drop_rate_get() +{ + local id=$1; shift + local t0 t1 + + t0=$(devlink_trap_policer_rx_dropped_get $id) + sleep 10 + t1=$(devlink_trap_policer_rx_dropped_get $id) + + echo $(((t1 - t0) / 10)) +} + +__rate_test() +{ + local rate pct drop_rate + local id=$1; shift + + RET=0 + + devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 512 + devlink trap group set $DEVLINK_DEV group l3_drops policer $id + + # Send packets at highest possible rate and make sure they are dropped + # by the policer. Make sure measured received rate is about 1000 pps + log_info "=== Tx rate: Highest, Policer rate: 1000 pps ===" + + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac + + sleep 5 # Take measurements when rate is stable + + rate=$(trap_rate_get) + pct=$((100 * (rate - 1000) / 1000)) + ((-10 <= pct && pct <= 10)) + check_err $? "Expected rate 1000 pps, got $rate pps, which is $pct% off. Required accuracy is +-10%" + log_info "Expected rate 1000 pps, measured rate $rate pps" + + drop_rate=$(policer_drop_rate_get $id) + (( drop_rate > 0 )) + check_err $? "Expected non-zero policer drop rate, got 0" + log_info "Measured policer drop rate of $drop_rate pps" + + stop_traffic + + # Send packets at a rate of 1000 pps and make sure they are not dropped + # by the policer + log_info "=== Tx rate: 1000 pps, Policer rate: 1000 pps ===" + + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -d 1msec + + sleep 5 # Take measurements when rate is stable + + drop_rate=$(policer_drop_rate_get $id) + (( drop_rate == 0 )) + check_err $? "Expected zero policer drop rate, got a drop rate of $drop_rate pps" + log_info "Measured policer drop rate of $drop_rate pps" + + stop_traffic + + # Unbind the policer and send packets at highest possible rate. Make + # sure they are not dropped by the policer and that the measured + # received rate is higher than 1000 pps + log_info "=== Tx rate: Highest, Policer rate: No policer ===" + + devlink trap group set $DEVLINK_DEV group l3_drops nopolicer + + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac + + rate=$(trap_rate_get) + (( rate > 1000 )) + check_err $? "Expected rate higher than 1000 pps, got $rate pps" + log_info "Measured rate $rate pps" + + drop_rate=$(policer_drop_rate_get $id) + (( drop_rate == 0 )) + check_err $? "Expected zero policer drop rate, got a drop rate of $drop_rate pps" + log_info "Measured policer drop rate of $drop_rate pps" + + stop_traffic + + log_test "Trap policer rate" +} + +rate_test() +{ + local last_policer=$(devlink -j -p trap policer show | + jq '[.[]["'$DEVLINK_DEV'"][].policer] | max') + + log_info "Running rate test for policer 1" + __rate_test 1 + + log_info "Running rate test for policer $((last_policer / 2))" + __rate_test $((last_policer / 2)) + + log_info "Running rate test for policer $last_policer" + __rate_test $last_policer +} + +__burst_test() +{ + local t0_rx t0_drop t1_rx t1_drop rx drop + local id=$1; shift + + RET=0 + + devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 512 + devlink trap group set $DEVLINK_DEV group l3_drops policer $id + + # Send a burst of 16 packets and make sure that 16 are received + # and that none are dropped by the policer + log_info "=== Tx burst size: 16, Policer burst size: 512 ===" + + t0_rx=$(devlink_trap_rx_packets_get blackhole_route) + t0_drop=$(devlink_trap_policer_rx_dropped_get $id) + + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -c 16 + + t1_rx=$(devlink_trap_rx_packets_get blackhole_route) + t1_drop=$(devlink_trap_policer_rx_dropped_get $id) + + rx=$((t1_rx - t0_rx)) + (( rx == 16 )) + check_err $? "Expected burst size of 16 packets, got $rx packets" + log_info "Expected burst size of 16 packets, measured burst size of $rx packets" + + drop=$((t1_drop - t0_drop)) + (( drop == 0 )) + check_err $? "Expected zero policer drops, got $drop" + log_info "Measured policer drops of $drop packets" + + # Unbind the policer and send a burst of 64 packets. Make sure that + # 64 packets are received and that none are dropped by the policer + log_info "=== Tx burst size: 64, Policer burst size: No policer ===" + + devlink trap group set $DEVLINK_DEV group l3_drops nopolicer + + t0_rx=$(devlink_trap_rx_packets_get blackhole_route) + t0_drop=$(devlink_trap_policer_rx_dropped_get $id) + + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -c 64 + + t1_rx=$(devlink_trap_rx_packets_get blackhole_route) + t1_drop=$(devlink_trap_policer_rx_dropped_get $id) + + rx=$((t1_rx - t0_rx)) + (( rx == 64 )) + check_err $? "Expected burst size of 64 packets, got $rx packets" + log_info "Expected burst size of 64 packets, measured burst size of $rx packets" + + drop=$((t1_drop - t0_drop)) + (( drop == 0 )) + check_err $? "Expected zero policer drops, got $drop" + log_info "Measured policer drops of $drop packets" + + log_test "Trap policer burst size" +} + +burst_test() +{ + local last_policer=$(devlink -j -p trap policer show | + jq '[.[]["'$DEVLINK_DEV'"][].policer] | max') + + log_info "Running burst test for policer 1" + __burst_test 1 + + log_info "Running burst test for policer $((last_policer / 2))" + __burst_test $((last_policer / 2)) + + log_info "Running burst test for policer $last_policer" + __burst_test $last_policer +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip.sh new file mode 100755 index 0000000000..e9a82cae8c --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip.sh @@ -0,0 +1,249 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap tunnel exceptions functionality over mlxsw. +# Check all exception traps to make sure they are triggered under the right +# conditions. + +# +-------------------------+ +# | H1 | +# | $h1 + | +# | 192.0.2.1/28 | | +# +-------------------|-----+ +# | +# +-------------------|-----+ +# | SW1 | | +# | $swp1 + | +# | 192.0.2.2/28 | +# | | +# | + g1a (gre) | +# | loc=192.0.2.65 | +# | rem=192.0.2.66 | +# | tos=inherit | +# | | +# | + $rp1 | +# | | 198.51.100.1/28 | +# +--|----------------------+ +# | +# +--|----------------------+ +# | | VRF2 | +# | + $rp2 | +# | 198.51.100.2/28 | +# +-------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + decap_error_test +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/28 +} + +vrf2_create() +{ + simple_if_init $rp2 198.51.100.2/28 +} + +vrf2_destroy() +{ + simple_if_fini $rp2 198.51.100.2/28 +} + +switch_create() +{ + __addr_add_del $swp1 add 192.0.2.2/28 + tc qdisc add dev $swp1 clsact + ip link set dev $swp1 up + + tunnel_create g1 gre 192.0.2.65 192.0.2.66 tos inherit + __addr_add_del g1 add 192.0.2.65/32 + ip link set dev g1 up + + __addr_add_del $rp1 add 198.51.100.1/28 + ip link set dev $rp1 up +} + +switch_destroy() +{ + ip link set dev $rp1 down + __addr_add_del $rp1 del 198.51.100.1/28 + + ip link set dev g1 down + __addr_add_del g1 del 192.0.2.65/32 + tunnel_destroy g1 + + ip link set dev $swp1 down + tc qdisc del dev $swp1 clsact + __addr_add_del $swp1 del 192.0.2.2/28 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + forwarding_enable + vrf_prepare + h1_create + switch_create + vrf2_create +} + +cleanup() +{ + pre_cleanup + + vrf2_destroy + switch_destroy + h1_destroy + vrf_cleanup + forwarding_restore +} + +ipip_payload_get() +{ + local flags=$1; shift + local key=$1; shift + + p=$(: + )"$flags"$( : GRE flags + )"0:00:"$( : Reserved + version + )"08:00:"$( : ETH protocol type + )"$key"$( : Key + )"4"$( : IP version + )"5:"$( : IHL + )"00:"$( : IP TOS + )"00:14:"$( : IP total length + )"00:00:"$( : IP identification + )"20:00:"$( : IP flags + frag off + )"30:"$( : IP TTL + )"01:"$( : IP proto + )"E7:E6:"$( : IP header csum + )"C0:00:01:01:"$( : IP saddr : 192.0.1.1 + )"C0:00:02:01:"$( : IP daddr : 192.0.2.1 + ) + echo $p +} + +ecn_payload_get() +{ + echo $(ipip_payload_get "0") +} + +ecn_decap_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local ecn_desc=$1; shift + local outer_tos=$1; shift + local mz_pid + + RET=0 + + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower src_ip 192.0.1.1 dst_ip 192.0.2.1 action pass + + rp1_mac=$(mac_get $rp1) + rp2_mac=$(mac_get $rp2) + payload=$(ecn_payload_get) + + ip vrf exec v$rp2 $MZ $rp2 -c 0 -d 1msec -a $rp2_mac -b $rp1_mac \ + -A 192.0.2.66 -B 192.0.2.65 -t ip \ + len=48,tos=$outer_tos,proto=47,p=$payload -q & + + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc: Inner ECN is not ECT and outer is $ecn_desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ip pref 1 handle 101 flower +} + +no_matching_tunnel_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local sip=$1; shift + local mz_pid + + RET=0 + + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower src_ip 192.0.1.1 dst_ip 192.0.2.1 action pass + + rp1_mac=$(mac_get $rp1) + rp2_mac=$(mac_get $rp2) + payload=$(ipip_payload_get "$@") + + ip vrf exec v$rp2 $MZ $rp2 -c 0 -d 1msec -a $rp2_mac -b $rp1_mac \ + -A $sip -B 192.0.2.65 -t ip len=48,proto=47,p=$payload -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ip pref 1 handle 101 flower +} + +decap_error_test() +{ + # Correct source IP - the remote address + local sip=192.0.2.66 + + ecn_decap_test "Decap error" "ECT(1)" 01 + ecn_decap_test "Decap error" "ECT(0)" 02 + ecn_decap_test "Decap error" "CE" 03 + + no_matching_tunnel_test "Decap error: Source IP check failed" \ + 192.0.2.68 "0" + no_matching_tunnel_test \ + "Decap error: Key exists but was not expected" $sip "2" \ + "00:00:00:E9:" + + # Destroy the tunnel and create new one with key + __addr_add_del g1 del 192.0.2.65/32 + tunnel_destroy g1 + + tunnel_create g1 gre 192.0.2.65 192.0.2.66 tos inherit key 233 + __addr_add_del g1 add 192.0.2.65/32 + + no_matching_tunnel_test \ + "Decap error: Key does not exist but was expected" $sip "0" + no_matching_tunnel_test \ + "Decap error: Packet has a wrong key field" $sip "2" \ + "00:00:00:E8:" +} + +trap cleanup EXIT + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip6.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip6.sh new file mode 100755 index 0000000000..878125041f --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip6.sh @@ -0,0 +1,250 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap tunnel exceptions functionality over mlxsw. +# Check all exception traps to make sure they are triggered under the right +# conditions. + +# +-------------------------+ +# | H1 | +# | $h1 + | +# | 2001:db8:1::1/64 | | +# +-------------------|-----+ +# | +# +-------------------|-----+ +# | SW1 | | +# | $swp1 + | +# | 2001:db8:1::2/64 | +# | | +# | + g1 (ip6gre) | +# | loc=2001:db8:3::1 | +# | rem=2001:db8:3::2 | +# | tos=inherit | +# | | +# | + $rp1 | +# | | 2001:db8:10::1/64 | +# +--|----------------------+ +# | +# +--|----------------------+ +# | | VRF2 | +# | + $rp2 | +# | 2001:db8:10::2/64 | +# +-------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + decap_error_test +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 2001:db8:1::1/64 +} + +h1_destroy() +{ + simple_if_fini $h1 2001:db8:1::1/64 +} + +vrf2_create() +{ + simple_if_init $rp2 2001:db8:10::2/64 +} + +vrf2_destroy() +{ + simple_if_fini $rp2 2001:db8:10::2/64 +} + +switch_create() +{ + ip link set dev $swp1 up + __addr_add_del $swp1 add 2001:db8:1::2/64 + tc qdisc add dev $swp1 clsact + + tunnel_create g1 ip6gre 2001:db8:3::1 2001:db8:3::2 tos inherit \ + ttl inherit + ip link set dev g1 up + __addr_add_del g1 add 2001:db8:3::1/128 + + ip link set dev $rp1 up + __addr_add_del $rp1 add 2001:db8:10::1/64 +} + +switch_destroy() +{ + __addr_add_del $rp1 del 2001:db8:10::1/64 + ip link set dev $rp1 down + + __addr_add_del g1 del 2001:db8:3::1/128 + ip link set dev g1 down + tunnel_destroy g1 + + tc qdisc del dev $swp1 clsact + __addr_add_del $swp1 del 2001:db8:1::2/64 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + forwarding_enable + vrf_prepare + h1_create + switch_create + vrf2_create +} + +cleanup() +{ + pre_cleanup + + vrf2_destroy + switch_destroy + h1_destroy + vrf_cleanup + forwarding_restore +} + +ipip_payload_get() +{ + local saddr="20:01:0d:b8:00:02:00:00:00:00:00:00:00:00:00:01" + local daddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01" + local flags=$1; shift + local key=$1; shift + + p=$(: + )"$flags"$( : GRE flags + )"0:00:"$( : Reserved + version + )"86:dd:"$( : ETH protocol type + )"$key"$( : Key + )"6"$( : IP version + )"0:0"$( : Traffic class + )"0:00:00:"$( : Flow label + )"00:00:"$( : Payload length + )"3a:"$( : Next header + )"04:"$( : Hop limit + )"$saddr:"$( : IP saddr + )"$daddr:"$( : IP daddr + ) + echo $p +} + +ecn_payload_get() +{ + echo $(ipip_payload_get "0") +} + +ecn_decap_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local ecn_desc=$1; shift + local outer_tos=$1; shift + local mz_pid + + RET=0 + + tc filter add dev $swp1 egress protocol ipv6 pref 1 handle 101 \ + flower src_ip 2001:db8:2::1 dst_ip 2001:db8:1::1 skip_sw \ + action pass + + rp1_mac=$(mac_get $rp1) + rp2_mac=$(mac_get $rp2) + payload=$(ecn_payload_get) + + ip vrf exec v$rp2 $MZ -6 $rp2 -c 0 -d 1msec -a $rp2_mac -b $rp1_mac \ + -A 2001:db8:3::2 -B 2001:db8:3::1 -t ip \ + tos=$outer_tos,next=47,p=$payload -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc: Inner ECN is not ECT and outer is $ecn_desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ipv6 pref 1 handle 101 flower +} + +no_matching_tunnel_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local sip=$1; shift + local mz_pid + + RET=0 + + tc filter add dev $swp1 egress protocol ipv6 pref 1 handle 101 \ + flower src_ip 2001:db8:2::1 dst_ip 2001:db8:1::1 action pass + + rp1_mac=$(mac_get $rp1) + rp2_mac=$(mac_get $rp2) + payload=$(ipip_payload_get "$@") + + ip vrf exec v$rp2 $MZ -6 $rp2 -c 0 -d 1msec -a $rp2_mac -b $rp1_mac \ + -A $sip -B 2001:db8:3::1 -t ip next=47,p=$payload -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ipv6 pref 1 handle 101 flower +} + +decap_error_test() +{ + # Correct source IP - the remote address + local sip=2001:db8:3::2 + + ecn_decap_test "Decap error" "ECT(1)" 01 + ecn_decap_test "Decap error" "ECT(0)" 02 + ecn_decap_test "Decap error" "CE" 03 + + no_matching_tunnel_test "Decap error: Source IP check failed" \ + 2001:db8:4::2 "0" + no_matching_tunnel_test \ + "Decap error: Key exists but was not expected" $sip "2" \ + "00:00:00:E9:" + + # Destroy the tunnel and create new one with key + __addr_add_del g1 del 2001:db8:3::1/128 + tunnel_destroy g1 + + tunnel_create g1 ip6gre 2001:db8:3::1 2001:db8:3::2 tos inherit \ + ttl inherit key 233 + __addr_add_del g1 add 2001:db8:3::1/128 + + no_matching_tunnel_test \ + "Decap error: Key does not exist but was expected" $sip "0" + no_matching_tunnel_test \ + "Decap error: Packet has a wrong key field" $sip "2" \ + "00:00:00:E8:" +} + +trap cleanup EXIT + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan.sh new file mode 100755 index 0000000000..5f6eb965cf --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan.sh @@ -0,0 +1,330 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap tunnel drops and exceptions functionality over mlxsw. +# Check all traps to make sure they are triggered under the right +# conditions. + +# +--------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 192.0.2.1/28 | +# +----|---------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 BR1 (802.1d) | | +# | | | | +# | | + vx1 (vxlan) | | +# | | local 192.0.2.17 | | +# | | id 1000 dstport $VXPORT | | +# | +-----------------------------------------------------------------------+ | +# | | +# | + $rp1 | +# | | 192.0.2.17/28 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | VRF2 | +# | + $rp2 | +# | 192.0.2.18/28 | +# | | +# +-------------------------------------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + decap_error_test + overlay_smac_is_mc_test +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +: ${VXPORT:=4789} +export VXPORT + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/28 +} + +switch_create() +{ + ip link add name br1 type bridge vlan_filtering 0 mcast_snooping 0 + # Make sure the bridge uses the MAC address of the local port and not + # that of the VxLAN's device. + ip link set dev br1 address $(mac_get $swp1) + ip link set dev br1 up + + tc qdisc add dev $swp1 clsact + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + + ip link add name vx1 type vxlan id 1000 local 192.0.2.17 \ + dstport "$VXPORT" nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx1 master br1 + ip link set dev vx1 up + + ip address add dev $rp1 192.0.2.17/28 + ip link set dev $rp1 up +} + +switch_destroy() +{ + ip link set dev $rp1 down + ip address del dev $rp1 192.0.2.17/28 + + ip link set dev vx1 down + ip link set dev vx1 nomaster + ip link del dev vx1 + + ip link set dev $swp1 down + ip link set dev $swp1 nomaster + tc qdisc del dev $swp1 clsact + + ip link set dev br1 down + ip link del dev br1 +} + +vrf2_create() +{ + simple_if_init $rp2 192.0.2.18/28 +} + +vrf2_destroy() +{ + simple_if_fini $rp2 192.0.2.18/28 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + h1_create + switch_create + vrf2_create +} + +cleanup() +{ + pre_cleanup + + vrf2_destroy + switch_destroy + h1_destroy + forwarding_restore + vrf_cleanup +} + +ecn_payload_get() +{ + dest_mac=$(mac_get $h1) + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"00:00:00:00:00:00:"$( : ETH saddr + )"08:00:"$( : ETH type + )"45:"$( : IP version + IHL + )"00:"$( : IP TOS + )"00:14:"$( : IP total length + )"00:00:"$( : IP identification + )"20:00:"$( : IP flags + frag off + )"40:"$( : IP TTL + )"00:"$( : IP proto + )"D6:E5:"$( : IP header csum + )"c0:00:02:03:"$( : IP saddr: 192.0.2.3 + )"c0:00:02:01:"$( : IP daddr: 192.0.2.1 + ) + echo $p +} + +ecn_decap_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local ecn_desc=$1; shift + local outer_tos=$1; shift + local mz_pid + + RET=0 + + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower src_ip 192.0.2.3 dst_ip 192.0.2.1 action pass + + rp1_mac=$(mac_get $rp1) + payload=$(ecn_payload_get) + + ip vrf exec v$rp2 $MZ $rp2 -c 0 -d 1msec -b $rp1_mac -B 192.0.2.17 \ + -t udp sp=12345,dp=$VXPORT,tos=$outer_tos,p=$payload -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc: Inner ECN is not ECT and outer is $ecn_desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ip pref 1 handle 101 flower +} + +reserved_bits_payload_get() +{ + dest_mac=$(mac_get $h1) + p=$(: + )"08:"$( : VXLAN flags + )"01:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"00:00:00:00:00:00:"$( : ETH saddr + )"08:00:"$( : ETH type + )"45:"$( : IP version + IHL + )"00:"$( : IP TOS + )"00:14:"$( : IP total length + )"00:00:"$( : IP identification + )"20:00:"$( : IP flags + frag off + )"40:"$( : IP TTL + )"00:"$( : IP proto + )"00:00:"$( : IP header csum + )"c0:00:02:03:"$( : IP saddr: 192.0.2.3 + )"c0:00:02:01:"$( : IP daddr: 192.0.2.1 + ) + echo $p +} + +short_payload_get() +{ + dest_mac=$(mac_get $h1) + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"00:00:00:00:00:00:"$( : ETH saddr + ) + echo $p +} + +corrupted_packet_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local payload_get=$1; shift + local mz_pid + + RET=0 + + # In case of too short packet, there is no any inner packet, + # so the matching will always succeed + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_hw src_ip 192.0.2.3 dst_ip 192.0.2.1 action pass + + rp1_mac=$(mac_get $rp1) + payload=$($payload_get) + ip vrf exec v$rp2 $MZ $rp2 -c 0 -d 1msec -b $rp1_mac \ + -B 192.0.2.17 -t udp sp=12345,dp=$VXPORT,p=$payload -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ip pref 1 handle 101 flower +} + +decap_error_test() +{ + ecn_decap_test "Decap error" "ECT(1)" 01 + ecn_decap_test "Decap error" "ECT(0)" 02 + ecn_decap_test "Decap error" "CE" 03 + + corrupted_packet_test "Decap error: Reserved bits in use" \ + "reserved_bits_payload_get" + corrupted_packet_test "Decap error: Too short inner packet" \ + "short_payload_get" +} + +mc_smac_payload_get() +{ + dest_mac=$(mac_get $h1) + source_mac=01:02:03:04:05:06 + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"$source_mac:"$( : ETH saddr + )"08:00:"$( : ETH type + )"45:"$( : IP version + IHL + )"00:"$( : IP TOS + )"00:14:"$( : IP total length + )"00:00:"$( : IP identification + )"20:00:"$( : IP flags + frag off + )"40:"$( : IP TTL + )"00:"$( : IP proto + )"00:00:"$( : IP header csum + )"c0:00:02:03:"$( : IP saddr: 192.0.2.3 + )"c0:00:02:01:"$( : IP daddr: 192.0.2.1 + ) + echo $p +} + +overlay_smac_is_mc_test() +{ + local trap_name="overlay_smac_is_mc" + local mz_pid + + RET=0 + + # The matching will be checked on devlink_trap_drop_test() + # and the filter will be removed on devlink_trap_drop_cleanup() + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower src_mac 01:02:03:04:05:06 action pass + + rp1_mac=$(mac_get $rp1) + payload=$(mc_smac_payload_get) + + ip vrf exec v$rp2 $MZ $rp2 -c 0 -d 1msec -b $rp1_mac \ + -B 192.0.2.17 -t udp sp=12345,dp=$VXPORT,p=$payload -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp1 101 + + log_test "Overlay source MAC is multicast" + + devlink_trap_drop_cleanup $mz_pid $swp1 "ip" 1 101 +} + +trap cleanup EXIT + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan_ipv6.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan_ipv6.sh new file mode 100755 index 0000000000..f6c16cbb6c --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan_ipv6.sh @@ -0,0 +1,342 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test devlink-trap tunnel drops and exceptions functionality over mlxsw. +# Check all traps to make sure they are triggered under the right +# conditions. + +# +------------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 2001:db8:1::1/64 | +# +----|-------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 BR1 (802.1d) | | +# | | | | +# | | + vx1 (vxlan) | | +# | | local 2001:db8:3::1 | | +# | | id 1000 dstport $VXPORT | | +# | +-----------------------------------------------------------------------+ | +# | | +# | + $rp1 | +# | | 2001:db8:3::1/64 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | VRF2 | +# | + $rp2 | +# | 2001:db8:3::2/64 | +# | | +# +-------------------------------------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + decap_error_test + overlay_smac_is_mc_test +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +: ${VXPORT:=4789} +export VXPORT + +h1_create() +{ + simple_if_init $h1 2001:db8:1::1/64 +} + +h1_destroy() +{ + simple_if_fini $h1 2001:db8:1::1/64 +} + +switch_create() +{ + ip link add name br1 type bridge vlan_filtering 0 mcast_snooping 0 + # Make sure the bridge uses the MAC address of the local port and not + # that of the VxLAN's device. + ip link set dev br1 address $(mac_get $swp1) + ip link set dev br1 up + + tc qdisc add dev $swp1 clsact + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + + ip link add name vx1 type vxlan id 1000 local 2001:db8:3::1 \ + dstport "$VXPORT" nolearning udp6zerocsumrx udp6zerocsumtx \ + tos inherit ttl 100 + ip link set dev vx1 master br1 + ip link set dev vx1 up + + ip link set dev $rp1 up + ip address add dev $rp1 2001:db8:3::1/64 +} + +switch_destroy() +{ + ip address del dev $rp1 2001:db8:3::1/64 + ip link set dev $rp1 down + + ip link set dev vx1 down + ip link set dev vx1 nomaster + ip link del dev vx1 + + ip link set dev $swp1 down + ip link set dev $swp1 nomaster + tc qdisc del dev $swp1 clsact + + ip link set dev br1 down + ip link del dev br1 +} + +vrf2_create() +{ + simple_if_init $rp2 2001:db8:3::2/64 +} + +vrf2_destroy() +{ + simple_if_fini $rp2 2001:db8:3::2/64 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + h1_create + switch_create + vrf2_create +} + +cleanup() +{ + pre_cleanup + + vrf2_destroy + switch_destroy + h1_destroy + forwarding_restore + vrf_cleanup +} + +ecn_payload_get() +{ + local dest_mac=$(mac_get $h1) + local saddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:03" + local daddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01" + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"00:00:00:00:00:00:"$( : ETH saddr + )"86:dd:"$( : ETH type + )"6"$( : IP version + )"0:0"$( : Traffic class + )"0:00:00:"$( : Flow label + )"00:08:"$( : Payload length + )"3a:"$( : Next header + )"04:"$( : Hop limit + )"$saddr:"$( : IP saddr + )"$daddr:"$( : IP daddr + )"80:"$( : ICMPv6.type + )"00:"$( : ICMPv6.code + )"00:"$( : ICMPv6.checksum + ) + echo $p +} + +ecn_decap_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local ecn_desc=$1; shift + local outer_tos=$1; shift + local mz_pid + + RET=0 + + tc filter add dev $swp1 egress protocol ipv6 pref 1 handle 101 \ + flower src_ip 2001:db8:1::3 dst_ip 2001:db8:1::1 action pass + + rp1_mac=$(mac_get $rp1) + payload=$(ecn_payload_get) + + ip vrf exec v$rp2 $MZ -6 $rp2 -c 0 -d 1msec -b $rp1_mac \ + -B 2001:db8:3::1 -t udp \ + sp=12345,dp=$VXPORT,tos=$outer_tos,p=$payload -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc: Inner ECN is not ECT and outer is $ecn_desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ipv6 pref 1 handle 101 flower +} + +reserved_bits_payload_get() +{ + local dest_mac=$(mac_get $h1) + local saddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:03" + local daddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01" + p=$(: + )"08:"$( : VXLAN flags + )"01:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"00:00:00:00:00:00:"$( : ETH saddr + )"86:dd:"$( : ETH type + )"6"$( : IP version + )"0:0"$( : Traffic class + )"0:00:00:"$( : Flow label + )"00:08:"$( : Payload length + )"3a:"$( : Next header + )"04:"$( : Hop limit + )"$saddr:"$( : IP saddr + )"$daddr:"$( : IP daddr + )"80:"$( : ICMPv6.type + )"00:"$( : ICMPv6.code + )"00:"$( : ICMPv6.checksum + ) + echo $p +} + +short_payload_get() +{ + dest_mac=$(mac_get $h1) + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"00:00:00:00:00:00:"$( : ETH saddr + ) + echo $p +} + +corrupted_packet_test() +{ + local trap_name="decap_error" + local desc=$1; shift + local payload_get=$1; shift + local mz_pid + + RET=0 + + # In case of too short packet, there is no any inner packet, + # so the matching will always succeed + tc filter add dev $swp1 egress protocol ipv6 pref 1 handle 101 \ + flower skip_hw src_ip 2001:db8:3::1 dst_ip 2001:db8:1::1 \ + action pass + + rp1_mac=$(mac_get $rp1) + payload=$($payload_get) + ip vrf exec v$rp2 $MZ -6 $rp2 -c 0 -d 1msec -b $rp1_mac \ + -B 2001:db8:3::1 -t udp sp=12345,dp=$VXPORT,p=$payload -q & + mz_pid=$! + + devlink_trap_exception_test $trap_name + + tc_check_packets "dev $swp1 egress" 101 0 + check_err $? "Packets were not dropped" + + log_test "$desc" + + kill $mz_pid && wait $mz_pid &> /dev/null + tc filter del dev $swp1 egress protocol ipv6 pref 1 handle 101 flower +} + +decap_error_test() +{ + ecn_decap_test "Decap error" "ECT(1)" 01 + ecn_decap_test "Decap error" "ECT(0)" 02 + ecn_decap_test "Decap error" "CE" 03 + + corrupted_packet_test "Decap error: Reserved bits in use" \ + "reserved_bits_payload_get" + corrupted_packet_test "Decap error: Too short inner packet" \ + "short_payload_get" +} + +mc_smac_payload_get() +{ + local dest_mac=$(mac_get $h1) + local source_mac="01:02:03:04:05:06" + local saddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:03" + local daddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01" + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"00:03:e8:"$( : VXLAN VNI : 1000 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"$source_mac:"$( : ETH saddr + )"86:dd:"$( : ETH type + )"6"$( : IP version + )"0:0"$( : Traffic class + )"0:00:00:"$( : Flow label + )"00:08:"$( : Payload length + )"3a:"$( : Next header + )"04:"$( : Hop limit + )"$saddr:"$( : IP saddr + )"$daddr:"$( : IP daddr + )"80:"$( : ICMPv6.type + )"00:"$( : ICMPv6.code + )"00:"$( : ICMPv6.checksum + ) + echo $p +} + +overlay_smac_is_mc_test() +{ + local trap_name="overlay_smac_is_mc" + local mz_pid + + RET=0 + + # The matching will be checked on devlink_trap_drop_test() + # and the filter will be removed on devlink_trap_drop_cleanup() + tc filter add dev $swp1 egress protocol ipv6 pref 1 handle 101 \ + flower src_mac 01:02:03:04:05:06 action pass + + rp1_mac=$(mac_get $rp1) + payload=$(mc_smac_payload_get) + + ip vrf exec v$rp2 $MZ -6 $rp2 -c 0 -d 1msec -b $rp1_mac \ + -B 2001:db8:3::1 -t udp sp=12345,dp=$VXPORT,p=$payload -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $swp1 101 + + log_test "Overlay source MAC is multicast" + + devlink_trap_drop_cleanup $mz_pid $swp1 "ipv6" 1 101 +} + +trap cleanup EXIT + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/egress_vid_classification.sh b/tools/testing/selftests/drivers/net/mlxsw/egress_vid_classification.sh new file mode 100755 index 0000000000..a5c2aec528 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/egress_vid_classification.sh @@ -0,0 +1,272 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test VLAN classification after routing and verify that the order of +# configuration does not impact switch behavior. Verify that {RIF, Port}->VID +# mapping is added correctly for existing {Port, VID}->FID mapping and that +# {RIF, Port}->VID mapping is added correctly for new {Port, VID}->FID mapping. + +# +-------------------+ +--------------------+ +# | H1 | | H2 | +# | | | | +# | $h1.10 + | | + $h2.10 | +# | 192.0.2.1/28 | | | | 192.0.2.3/28 | +# | | | | | | +# | $h1 + | | + $h2 | +# +----------------|--+ +--|-----------------+ +# | | +# +----------------|-------------------------|-----------------+ +# | SW $swp1 + + $swp2 | +# | | | | +# | +--------------|-------------------------|---------------+ | +# | | $swp1.10 + + $swp2.10 | | +# | | | | +# | | br0 | | +# | | 192.0.2.2/28 | | +# | +--------------------------------------------------------+ | +# | | +# | $swp3.20 + | +# | 192.0.2.17/28 | | +# | | | +# | $swp3 + | +# +---------------|--------------------------------------------+ +# | +# +---------------|--+ +# | $h3 + | +# | | | +# | $h3.20 + | +# | 192.0.2.18/28 | +# | | +# | H3 | +# +------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + port_vid_map_rif + rif_port_vid_map +" + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 + vlan_create $h1 10 v$h1 192.0.2.1/28 + + ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 + + vlan_destroy $h1 10 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + vlan_create $h2 10 v$h2 192.0.2.3/28 +} + +h2_destroy() +{ + vlan_destroy $h2 10 + simple_if_fini $h2 +} + +h3_create() +{ + simple_if_init $h3 + vlan_create $h3 20 v$h3 192.0.2.18/28 + + ip route add 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 +} + +h3_destroy() +{ + ip route del 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 + + vlan_destroy $h3 20 + simple_if_fini $h3 +} + +switch_create() +{ + ip link set dev $swp1 up + tc qdisc add dev $swp1 clsact + + ip link add dev br0 type bridge mcast_snooping 0 + + # By default, a link-local address is generated when netdevice becomes + # up. Adding an address to the bridge will cause creating a RIF for it. + # Prevent generating link-local address to be able to control when the + # RIF is added. + sysctl_set net.ipv6.conf.br0.addr_gen_mode 1 + ip link set dev br0 up + + ip link set dev $swp2 up + vlan_create $swp2 10 + ip link set dev $swp2.10 master br0 + + ip link set dev $swp3 up + vlan_create $swp3 20 "" 192.0.2.17/28 + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev $swp3.20 192.0.2.18 lladdr $(mac_get $h3.20) +} + +switch_destroy() +{ + vlan_destroy $swp3 20 + ip link set dev $swp3 down + + ip link set dev $swp2.10 nomaster + vlan_destroy $swp2 10 + ip link set dev $swp2 down + + ip link set dev br0 down + sysctl_restore net.ipv6.conf.br0.addr_gen_mode + ip link del dev br0 + + tc qdisc del dev $swp1 clsact + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + vrf_prepare + forwarding_enable + + h1_create + h2_create + h3_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h3_destroy + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +bridge_rif_add() +{ + rifs_occ_t0=$(devlink_resource_occ_get rifs) + __addr_add_del br0 add 192.0.2.2/28 + rifs_occ_t1=$(devlink_resource_occ_get rifs) + + expected_rifs=$((rifs_occ_t0 + 1)) + + [[ $expected_rifs -eq $rifs_occ_t1 ]] + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + sleep 1 +} + +bridge_rif_del() +{ + __addr_add_del br0 del 192.0.2.2/28 +} + +port_vid_map_rif() +{ + RET=0 + + # First add {port, VID}->FID for swp1.10, then add a RIF and verify that + # packets get the correct VID after routing. + vlan_create $swp1 10 + ip link set dev $swp1.10 master br0 + bridge_rif_add + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev br0 192.0.2.1 lladdr $(mac_get $h1.10) + + # The hardware matches on the first ethertype which is not VLAN, + # so the protocol should be IP. + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.1 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp1 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add RIF for existing {port, VID}->FID mapping" + + tc filter del dev $swp1 egress + + bridge_rif_del + ip link set dev $swp1.10 nomaster + vlan_destroy $swp1 10 +} + +rif_port_vid_map() +{ + RET=0 + + # First add an address to the bridge, which will create a RIF on top of + # it, then add a new {port, VID}->FID mapping and verify that packets + # get the correct VID after routing. + bridge_rif_add + vlan_create $swp1 10 + ip link set dev $swp1.10 master br0 + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev br0 192.0.2.1 lladdr $(mac_get $h1.10) + + # The hardware matches on the first ethertype which is not VLAN, + # so the protocol should be IP. + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.1 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp1 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add {port, VID}->FID mapping for FID with a RIF" + + tc filter del dev $swp1 egress + + ip link set dev $swp1.10 nomaster + vlan_destroy $swp1 10 + bridge_rif_del +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh b/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh new file mode 100755 index 0000000000..91891b9418 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh @@ -0,0 +1,187 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + autoneg + autoneg_force_mode +" + +NUM_NETIFS=2 +: ${TIMEOUT:=30000} # ms +source $lib_dir/lib.sh +source $lib_dir/ethtool_lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up + + busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 + check_err $? "ports did not come up" + + local lanes_exist=$(ethtool $swp1 | grep 'Lanes:') + if [[ -z $lanes_exist ]]; then + log_test "SKIP: driver does not support lanes setting" + exit 1 + fi + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +check_lanes() +{ + local dev=$1; shift + local lanes=$1; shift + local max_speed=$1; shift + local chosen_lanes + + chosen_lanes=$(ethtool $dev | grep 'Lanes:') + chosen_lanes=${chosen_lanes#*"Lanes: "} + + ((chosen_lanes == lanes)) + check_err $? "swp1 advertise $max_speed and $lanes, devs sync to $chosen_lanes" +} + +check_unsupported_lanes() +{ + local dev=$1; shift + local max_speed=$1; shift + local max_lanes=$1; shift + local autoneg=$1; shift + local autoneg_str="" + + local unsupported_lanes=$((max_lanes *= 2)) + + if [[ $autoneg -eq 0 ]]; then + autoneg_str="autoneg off" + fi + + ethtool -s $swp1 speed $max_speed lanes $unsupported_lanes $autoneg_str &> /dev/null + check_fail $? "Unsuccessful $unsupported_lanes lanes setting was expected" +} + +max_speed_and_lanes_get() +{ + local dev=$1; shift + local arr=("$@") + local max_lanes + local max_speed + local -a lanes_arr + local -a speeds_arr + local -a max_values + + for ((i=0; i<${#arr[@]}; i+=2)); do + speeds_arr+=("${arr[$i]}") + lanes_arr+=("${arr[i+1]}") + done + + max_values+=($(get_max "${speeds_arr[@]}")) + max_values+=($(get_max "${lanes_arr[@]}")) + + echo ${max_values[@]} +} + +search_linkmode() +{ + local speed=$1; shift + local lanes=$1; shift + local arr=("$@") + + for ((i=0; i<${#arr[@]}; i+=2)); do + if [[ $speed -eq ${arr[$i]} && $lanes -eq ${arr[i+1]} ]]; then + return 1 + fi + done + return 0 +} + +autoneg() +{ + RET=0 + + local lanes + local max_speed + local max_lanes + + local -a linkmodes_params=($(dev_linkmodes_params_get $swp1 1)) + local -a max_values=($(max_speed_and_lanes_get $swp1 "${linkmodes_params[@]}")) + max_speed=${max_values[0]} + max_lanes=${max_values[1]} + + lanes=$max_lanes + + while [[ $lanes -ge 1 ]]; do + search_linkmode $max_speed $lanes "${linkmodes_params[@]}" + if [[ $? -eq 1 ]]; then + ethtool_set $swp1 speed $max_speed lanes $lanes + ip link set dev $swp1 up + ip link set dev $swp2 up + busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 + check_err $? "ports did not come up" + + check_lanes $swp1 $lanes $max_speed + log_test "$lanes lanes is autonegotiated" + fi + let $((lanes /= 2)) + done + + check_unsupported_lanes $swp1 $max_speed $max_lanes 1 + log_test "Lanes number larger than max width is not set" + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +autoneg_force_mode() +{ + RET=0 + + local lanes + local max_speed + local max_lanes + + local -a linkmodes_params=($(dev_linkmodes_params_get $swp1 1)) + local -a max_values=($(max_speed_and_lanes_get $swp1 "${linkmodes_params[@]}")) + max_speed=${max_values[0]} + max_lanes=${max_values[1]} + + lanes=$max_lanes + + while [[ $lanes -ge 1 ]]; do + search_linkmode $max_speed $lanes "${linkmodes_params[@]}" + if [[ $? -eq 1 ]]; then + ethtool_set $swp1 speed $max_speed lanes $lanes autoneg off + ethtool_set $swp2 speed $max_speed lanes $lanes autoneg off + ip link set dev $swp1 up + ip link set dev $swp2 up + busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 + check_err $? "ports did not come up" + + check_lanes $swp1 $lanes $max_speed + log_test "Autoneg off, $lanes lanes detected during force mode" + fi + let $((lanes /= 2)) + done + + check_unsupported_lanes $swp1 $max_speed $max_lanes 0 + log_test "Lanes number larger than max width is not set" + + ip link set dev $swp2 down + ip link set dev $swp1 down + + ethtool -s $swp2 autoneg on + ethtool -s $swp1 autoneg on +} + +check_ethtool_lanes_support +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/extack.sh b/tools/testing/selftests/drivers/net/mlxsw/extack.sh new file mode 100755 index 0000000000..6fd422d38f --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/extack.sh @@ -0,0 +1,182 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test operations that we expect to report extended ack. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + netdev_pre_up_test + vxlan_vlan_add_test + vxlan_bridge_create_test + bridge_create_test +" +NUM_NETIFS=2 +source $lib_dir/lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +netdev_pre_up_test() +{ + RET=0 + + ip link add name br1 type bridge vlan_filtering 0 mcast_snooping 0 + ip link set dev br1 addrgenmode none + ip link set dev br1 up + ip link add name vx1 up type vxlan id 1000 \ + local 192.0.2.17 remote 192.0.2.18 \ + dstport 4789 nolearning noudpcsum tos inherit ttl 100 + + ip link set dev vx1 master br1 + check_err $? + + ip link set dev $swp1 master br1 + check_err $? + + ip link add name br2 type bridge vlan_filtering 0 mcast_snooping 0 + ip link set dev br2 addrgenmode none + ip link set dev br2 up + ip link add name vx2 up type vxlan id 2000 \ + local 192.0.2.17 remote 192.0.2.18 \ + dstport 4789 nolearning noudpcsum tos inherit ttl 100 + + ip link set dev vx2 master br2 + check_err $? + + ip link set dev $swp2 master br2 + check_err $? + + # Unsupported configuration: mlxsw demands that all offloaded VXLAN + # devices have the same TTL. + ip link set dev vx2 down + ip link set dev vx2 type vxlan ttl 200 + + ip link set dev vx2 up &>/dev/null + check_fail $? + + ip link set dev vx2 up 2>&1 >/dev/null | grep -q mlxsw_spectrum + check_err $? + + log_test "extack - NETDEV_PRE_UP" + + ip link del dev vx2 + ip link del dev br2 + + ip link del dev vx1 + ip link del dev br1 +} + +vxlan_vlan_add_test() +{ + RET=0 + + ip link add name br1 type bridge vlan_filtering 1 mcast_snooping 0 + ip link set dev br1 addrgenmode none + ip link set dev br1 up + + # Unsupported configuration: mlxsw demands VXLAN with "noudpcsum". + ip link add name vx1 up type vxlan id 1000 \ + local 192.0.2.17 remote 192.0.2.18 \ + dstport 4789 tos inherit ttl 100 + + ip link set dev vx1 master br1 + check_err $? + + bridge vlan add dev vx1 vid 1 + check_err $? + + ip link set dev $swp1 master br1 + check_err $? + + bridge vlan add dev vx1 vid 1 pvid untagged 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? + + log_test "extack - map VLAN at VXLAN device" + + ip link del dev vx1 + ip link del dev br1 +} + +vxlan_bridge_create_test() +{ + RET=0 + + # Unsupported configuration: mlxsw demands VXLAN with "noudpcsum". + ip link add name vx1 up type vxlan id 1000 \ + local 192.0.2.17 remote 192.0.2.18 \ + dstport 4789 tos inherit ttl 100 + + # Test with VLAN-aware bridge. + ip link add name br1 type bridge vlan_filtering 1 mcast_snooping 0 + ip link set dev br1 addrgenmode none + ip link set dev br1 up + + ip link set dev vx1 master br1 + + ip link set dev $swp1 master br1 2>&1 > /dev/null \ + | grep -q mlxsw_spectrum + check_err $? + + # Test with VLAN-unaware bridge. + ip link set dev br1 type bridge vlan_filtering 0 + + ip link set dev $swp1 master br1 2>&1 > /dev/null \ + | grep -q mlxsw_spectrum + check_err $? + + log_test "extack - bridge creation with VXLAN" + + ip link del dev br1 + ip link del dev vx1 +} + +bridge_create_test() +{ + RET=0 + + ip link add name br1 type bridge vlan_filtering 1 + ip link set dev br1 addrgenmode none + ip link set dev br1 up + ip link add name br2 type bridge vlan_filtering 1 + ip link set dev br2 addrgenmode none + ip link set dev br2 up + + ip link set dev $swp1 master br1 + check_err $? + + # Only one VLAN-aware bridge is supported, so this should fail with + # an extack. + ip link set dev $swp2 master br2 2>&1 > /dev/null \ + | grep -q mlxsw_spectrum + check_err $? + + log_test "extack - multiple VLAN-aware bridges creation" + + ip link del dev br2 + ip link del dev br1 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/fib.sh b/tools/testing/selftests/drivers/net/mlxsw/fib.sh new file mode 100755 index 0000000000..dcbf32b99b --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/fib.sh @@ -0,0 +1,270 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test is for checking the FIB offload API on top of mlxsw. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + ipv4_identical_routes + ipv4_tos + ipv4_metric + ipv4_replace + ipv4_delete + ipv4_plen + ipv4_replay + ipv4_flush + ipv4_local_replace + ipv6_add + ipv6_metric + ipv6_append_single + ipv6_replace_single + ipv6_metric_multipath + ipv6_append_multipath + ipv6_replace_multipath + ipv6_append_multipath_to_single + ipv6_delete_single + ipv6_delete_multipath + ipv6_replay_single + ipv6_replay_multipath + ipv6_local_replace +" +NUM_NETIFS=0 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source $lib_dir/fib_offload_lib.sh + +ipv4_identical_routes() +{ + fib_ipv4_identical_routes_test "testns1" +} + +ipv4_tos() +{ + fib_ipv4_tos_test "testns1" +} + +ipv4_metric() +{ + fib_ipv4_metric_test "testns1" +} + +ipv4_replace() +{ + fib_ipv4_replace_test "testns1" +} + +ipv4_delete() +{ + fib_ipv4_delete_test "testns1" +} + +ipv4_plen() +{ + fib_ipv4_plen_test "testns1" +} + +ipv4_replay_metric() +{ + fib_ipv4_replay_metric_test "testns1" "$DEVLINK_DEV" +} + +ipv4_replay_tos() +{ + fib_ipv4_replay_tos_test "testns1" "$DEVLINK_DEV" +} + +ipv4_replay_plen() +{ + fib_ipv4_replay_plen_test "testns1" "$DEVLINK_DEV" +} + +ipv4_replay() +{ + ipv4_replay_metric + ipv4_replay_tos + ipv4_replay_plen +} + +ipv4_flush() +{ + fib_ipv4_flush_test "testns1" +} + +ipv4_local_replace() +{ + local ns="testns1" + + RET=0 + + ip -n $ns link add name dummy1 type dummy + ip -n $ns link set dev dummy1 up + + ip -n $ns route add table local 192.0.2.1/32 dev dummy1 + fib4_trap_check $ns "table local 192.0.2.1/32 dev dummy1" false + check_err $? "Local table route not in hardware when should" + + ip -n $ns route add table main 192.0.2.1/32 dev dummy1 + fib4_trap_check $ns "table main 192.0.2.1/32 dev dummy1" true + check_err $? "Main table route in hardware when should not" + + fib4_trap_check $ns "table local 192.0.2.1/32 dev dummy1" false + check_err $? "Local table route was replaced when should not" + + # Test that local routes can replace routes in main table. + ip -n $ns route add table main 192.0.2.2/32 dev dummy1 + fib4_trap_check $ns "table main 192.0.2.2/32 dev dummy1" false + check_err $? "Main table route not in hardware when should" + + ip -n $ns route add table local 192.0.2.2/32 dev dummy1 + fib4_trap_check $ns "table local 192.0.2.2/32 dev dummy1" false + check_err $? "Local table route did not replace route in main table when should" + + fib4_trap_check $ns "table main 192.0.2.2/32 dev dummy1" true + check_err $? "Main table route was not replaced when should" + + log_test "IPv4 local table route replacement" + + ip -n $ns link del dev dummy1 +} + +ipv6_add() +{ + fib_ipv6_add_test "testns1" +} + +ipv6_metric() +{ + fib_ipv6_metric_test "testns1" +} + +ipv6_append_single() +{ + fib_ipv6_append_single_test "testns1" +} + +ipv6_replace_single() +{ + fib_ipv6_replace_single_test "testns1" +} + +ipv6_metric_multipath() +{ + fib_ipv6_metric_multipath_test "testns1" +} + +ipv6_append_multipath() +{ + fib_ipv6_append_multipath_test "testns1" +} + +ipv6_replace_multipath() +{ + fib_ipv6_replace_multipath_test "testns1" +} + +ipv6_append_multipath_to_single() +{ + fib_ipv6_append_multipath_to_single_test "testns1" +} + +ipv6_delete_single() +{ + fib_ipv6_delete_single_test "testns1" +} + +ipv6_delete_multipath() +{ + fib_ipv6_delete_multipath_test "testns1" +} + +ipv6_replay_single() +{ + fib_ipv6_replay_single_test "testns1" "$DEVLINK_DEV" +} + +ipv6_replay_multipath() +{ + fib_ipv6_replay_multipath_test "testns1" "$DEVLINK_DEV" +} + +ipv6_local_replace() +{ + local ns="testns1" + + RET=0 + + ip -n $ns link add name dummy1 type dummy + ip -n $ns link set dev dummy1 up + + ip -n $ns route add table local 2001:db8:1::1/128 dev dummy1 + fib6_trap_check $ns "table local 2001:db8:1::1/128 dev dummy1" false + check_err $? "Local table route not in hardware when should" + + ip -n $ns route add table main 2001:db8:1::1/128 dev dummy1 + fib6_trap_check $ns "table main 2001:db8:1::1/128 dev dummy1" true + check_err $? "Main table route in hardware when should not" + + fib6_trap_check $ns "table local 2001:db8:1::1/128 dev dummy1" false + check_err $? "Local table route was replaced when should not" + + # Test that local routes can replace routes in main table. + ip -n $ns route add table main 2001:db8:1::2/128 dev dummy1 + fib6_trap_check $ns "table main 2001:db8:1::2/128 dev dummy1" false + check_err $? "Main table route not in hardware when should" + + ip -n $ns route add table local 2001:db8:1::2/128 dev dummy1 + fib6_trap_check $ns "table local 2001:db8:1::2/128 dev dummy1" false + check_err $? "Local route route did not replace route in main table when should" + + fib6_trap_check $ns "table main 2001:db8:1::2/128 dev dummy1" true + check_err $? "Main table route was not replaced when should" + + log_test "IPv6 local table route replacement" + + ip -n $ns link del dev dummy1 +} + +fib_notify_on_flag_change_set() +{ + local notify=$1; shift + + ip netns exec testns1 sysctl -qw net.ipv4.fib_notify_on_flag_change=$notify + ip netns exec testns1 sysctl -qw net.ipv6.fib_notify_on_flag_change=$notify + + log_info "Set fib_notify_on_flag_change to $notify" +} + +setup_prepare() +{ + ip netns add testns1 + if [ $? -ne 0 ]; then + echo "Failed to add netns \"testns1\"" + exit 1 + fi + + devlink dev reload $DEVLINK_DEV netns testns1 + if [ $? -ne 0 ]; then + echo "Failed to reload into netns \"testns1\"" + exit 1 + fi +} + +cleanup() +{ + pre_cleanup + devlink -N testns1 dev reload $DEVLINK_DEV netns $$ + ip netns del testns1 +} + +trap cleanup EXIT + +setup_prepare + +fib_notify_on_flag_change_set 1 +tests_run + +fib_notify_on_flag_change_set 0 +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/fib_offload.sh b/tools/testing/selftests/drivers/net/mlxsw/fib_offload.sh new file mode 100755 index 0000000000..e99ae500f3 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/fib_offload.sh @@ -0,0 +1,349 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test unicast FIB offload indication. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + ipv6_route_add + ipv6_route_replace + ipv6_route_nexthop_group_share + ipv6_route_rate +" +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +tor1_create() +{ + simple_if_init $tor1_p1 2001:db8:1::2/128 2001:db8:1::3/128 +} + +tor1_destroy() +{ + simple_if_fini $tor1_p1 2001:db8:1::2/128 2001:db8:1::3/128 +} + +tor2_create() +{ + simple_if_init $tor2_p1 2001:db8:2::2/128 2001:db8:2::3/128 +} + +tor2_destroy() +{ + simple_if_fini $tor2_p1 2001:db8:2::2/128 2001:db8:2::3/128 +} + +spine_create() +{ + ip link set dev $spine_p1 up + ip link set dev $spine_p2 up + + __addr_add_del $spine_p1 add 2001:db8:1::1/64 + __addr_add_del $spine_p2 add 2001:db8:2::1/64 +} + +spine_destroy() +{ + __addr_add_del $spine_p2 del 2001:db8:2::1/64 + __addr_add_del $spine_p1 del 2001:db8:1::1/64 + + ip link set dev $spine_p2 down + ip link set dev $spine_p1 down +} + +ipv6_offload_check() +{ + local pfx="$1"; shift + local expected_num=$1; shift + local num + + # Try to avoid races with route offload + sleep .1 + + num=$(ip -6 route show match ${pfx} | grep "offload" | wc -l) + + if [ $num -eq $expected_num ]; then + return 0 + fi + + return 1 +} + +ipv6_route_add_prefix() +{ + RET=0 + + # Add a prefix route and check that it is offloaded. + ip -6 route add 2001:db8:3::/64 dev $spine_p1 metric 100 + ipv6_offload_check "2001:db8:3::/64 dev $spine_p1 metric 100" 1 + check_err $? "prefix route not offloaded" + + # Append an identical prefix route with an higher metric and check that + # offload indication did not change. + ip -6 route append 2001:db8:3::/64 dev $spine_p1 metric 200 + ipv6_offload_check "2001:db8:3::/64 dev $spine_p1 metric 100" 1 + check_err $? "lowest metric not offloaded after append" + ipv6_offload_check "2001:db8:3::/64 dev $spine_p1 metric 200" 0 + check_err $? "highest metric offloaded when should not" + + # Prepend an identical prefix route with lower metric and check that + # it is offloaded and the others are not. + ip -6 route append 2001:db8:3::/64 dev $spine_p1 metric 10 + ipv6_offload_check "2001:db8:3::/64 dev $spine_p1 metric 10" 1 + check_err $? "lowest metric not offloaded after prepend" + ipv6_offload_check "2001:db8:3::/64 dev $spine_p1 metric 100" 0 + check_err $? "mid metric offloaded when should not" + ipv6_offload_check "2001:db8:3::/64 dev $spine_p1 metric 200" 0 + check_err $? "highest metric offloaded when should not" + + # Delete the routes and add the same route with a different nexthop + # device. Check that it is offloaded. + ip -6 route flush 2001:db8:3::/64 dev $spine_p1 + ip -6 route add 2001:db8:3::/64 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64 dev $spine_p2" 1 + + log_test "IPv6 prefix route add" + + ip -6 route flush 2001:db8:3::/64 +} + +ipv6_route_add_mpath() +{ + RET=0 + + # Add a multipath route and check that it is offloaded. + ip -6 route add 2001:db8:3::/64 metric 100 \ + nexthop via 2001:db8:1::2 dev $spine_p1 \ + nexthop via 2001:db8:2::2 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64 metric 100" 2 + check_err $? "multipath route not offloaded when should" + + # Append another nexthop and check that it is offloaded as well. + ip -6 route append 2001:db8:3::/64 metric 100 \ + nexthop via 2001:db8:1::3 dev $spine_p1 + ipv6_offload_check "2001:db8:3::/64 metric 100" 3 + check_err $? "appended nexthop not offloaded when should" + + # Mimic route replace by removing the route and adding it back with + # only two nexthops. + ip -6 route del 2001:db8:3::/64 + ip -6 route add 2001:db8:3::/64 metric 100 \ + nexthop via 2001:db8:1::2 dev $spine_p1 \ + nexthop via 2001:db8:2::2 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64 metric 100" 2 + check_err $? "multipath route not offloaded after delete & add" + + # Append a nexthop with an higher metric and check that the offload + # indication did not change. + ip -6 route append 2001:db8:3::/64 metric 200 \ + nexthop via 2001:db8:1::3 dev $spine_p1 + ipv6_offload_check "2001:db8:3::/64 metric 100" 2 + check_err $? "lowest metric not offloaded after append" + ipv6_offload_check "2001:db8:3::/64 metric 200" 0 + check_err $? "highest metric offloaded when should not" + + # Prepend a nexthop with a lower metric and check that it is offloaded + # and the others are not. + ip -6 route append 2001:db8:3::/64 metric 10 \ + nexthop via 2001:db8:1::3 dev $spine_p1 + ipv6_offload_check "2001:db8:3::/64 metric 10" 1 + check_err $? "lowest metric not offloaded after prepend" + ipv6_offload_check "2001:db8:3::/64 metric 100" 0 + check_err $? "mid metric offloaded when should not" + ipv6_offload_check "2001:db8:3::/64 metric 200" 0 + check_err $? "highest metric offloaded when should not" + + log_test "IPv6 multipath route add" + + ip -6 route flush 2001:db8:3::/64 +} + +ipv6_route_add() +{ + ipv6_route_add_prefix + ipv6_route_add_mpath +} + +ipv6_route_replace() +{ + RET=0 + + # Replace prefix route with prefix route. + ip -6 route add 2001:db8:3::/64 metric 100 dev $spine_p1 + ipv6_offload_check "2001:db8:3::/64 metric 100" 1 + check_err $? "prefix route not offloaded when should" + ip -6 route replace 2001:db8:3::/64 metric 100 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64 metric 100" 1 + check_err $? "prefix route not offloaded after replace" + + # Replace prefix route with multipath route. + ip -6 route replace 2001:db8:3::/64 metric 100 \ + nexthop via 2001:db8:1::2 dev $spine_p1 \ + nexthop via 2001:db8:2::2 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64 metric 100" 2 + check_err $? "multipath route not offloaded after replace" + + # Replace multipath route with prefix route. A prefix route cannot + # replace a multipath route, so it is appended. + ip -6 route replace 2001:db8:3::/64 metric 100 dev $spine_p1 + ipv6_offload_check "2001:db8:3::/64 metric 100 dev $spine_p1" 0 + check_err $? "prefix route offloaded after 'replacing' multipath route" + ipv6_offload_check "2001:db8:3::/64 metric 100" 2 + check_err $? "multipath route not offloaded after being 'replaced' by prefix route" + + # Replace multipath route with multipath route. + ip -6 route replace 2001:db8:3::/64 metric 100 \ + nexthop via 2001:db8:1::3 dev $spine_p1 \ + nexthop via 2001:db8:2::3 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64 metric 100" 2 + check_err $? "multipath route not offloaded after replacing multipath route" + + # Replace a non-existing multipath route with a multipath route and + # check that it is appended and not offloaded. + ip -6 route replace 2001:db8:3::/64 metric 200 \ + nexthop via 2001:db8:1::3 dev $spine_p1 \ + nexthop via 2001:db8:2::3 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64 metric 100" 2 + check_err $? "multipath route not offloaded after non-existing route was 'replaced'" + ipv6_offload_check "2001:db8:3::/64 metric 200" 0 + check_err $? "multipath route offloaded after 'replacing' non-existing route" + + log_test "IPv6 route replace" + + ip -6 route flush 2001:db8:3::/64 +} + +ipv6_route_nexthop_group_share() +{ + RET=0 + + # The driver consolidates identical nexthop groups in order to reduce + # the resource usage in its adjacency table. Check that the deletion + # of one multipath route using the group does not affect the other. + ip -6 route add 2001:db8:3::/64 \ + nexthop via 2001:db8:1::2 dev $spine_p1 \ + nexthop via 2001:db8:2::2 dev $spine_p2 + ip -6 route add 2001:db8:4::/64 \ + nexthop via 2001:db8:1::2 dev $spine_p1 \ + nexthop via 2001:db8:2::2 dev $spine_p2 + ipv6_offload_check "2001:db8:3::/64" 2 + check_err $? "multipath route not offloaded when should" + ipv6_offload_check "2001:db8:4::/64" 2 + check_err $? "multipath route not offloaded when should" + ip -6 route del 2001:db8:3::/64 + ipv6_offload_check "2001:db8:4::/64" 2 + check_err $? "multipath route not offloaded after deletion of route sharing the nexthop group" + + # Check that after unsharing a nexthop group the routes are still + # marked as offloaded. + ip -6 route add 2001:db8:3::/64 \ + nexthop via 2001:db8:1::2 dev $spine_p1 \ + nexthop via 2001:db8:2::2 dev $spine_p2 + ip -6 route del 2001:db8:4::/64 \ + nexthop via 2001:db8:1::2 dev $spine_p1 + ipv6_offload_check "2001:db8:4::/64" 1 + check_err $? "singlepath route not offloaded after unsharing the nexthop group" + ipv6_offload_check "2001:db8:3::/64" 2 + check_err $? "multipath route not offloaded after unsharing the nexthop group" + + log_test "IPv6 nexthop group sharing" + + ip -6 route flush 2001:db8:3::/64 + ip -6 route flush 2001:db8:4::/64 +} + +ipv6_route_rate() +{ + local batch_dir=$(mktemp -d) + local num_rts=$((40 * 1024)) + local num_nhs=16 + local total + local start + local diff + local end + local nhs + local i + + RET=0 + + # Prepare 40K /64 multipath routes with 16 nexthops each and check how + # long it takes to add them. A limit of 60 seconds is set. It is much + # higher than insertion should take and meant to flag a serious + # regression. + total=$((nums_nhs * num_rts)) + + for i in $(seq 1 $num_nhs); do + ip -6 address add 2001:db8:1::10:$i/128 dev $tor1_p1 + nexthops+=" nexthop via 2001:db8:1::10:$i dev $spine_p1" + done + + for i in $(seq 1 $num_rts); do + echo "route add 2001:db8:8:$(printf "%x" $i)::/64$nexthops" \ + >> $batch_dir/add.batch + echo "route del 2001:db8:8:$(printf "%x" $i)::/64$nexthops" \ + >> $batch_dir/del.batch + done + + start=$(date +%s.%N) + + ip -batch $batch_dir/add.batch + count=$(ip -6 route show | grep offload | wc -l) + while [ $count -lt $total ]; do + sleep .01 + count=$(ip -6 route show | grep offload | wc -l) + done + + end=$(date +%s.%N) + + diff=$(echo "$end - $start" | bc -l) + test "$(echo "$diff > 60" | bc -l)" -eq 0 + check_err $? "route insertion took too long" + log_info "inserted $num_rts routes in $diff seconds" + + log_test "IPv6 routes insertion rate" + + ip -batch $batch_dir/del.batch + for i in $(seq 1 $num_nhs); do + ip -6 address del 2001:db8:1::10:$i/128 dev $tor1_p1 + done + rm -rf $batch_dir +} + +setup_prepare() +{ + spine_p1=${NETIFS[p1]} + tor1_p1=${NETIFS[p2]} + + spine_p2=${NETIFS[p3]} + tor2_p1=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + + tor1_create + tor2_create + spine_create +} + +cleanup() +{ + pre_cleanup + + spine_destroy + tor2_destroy + tor1_destroy + + forwarding_restore + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/hw_stats_l3.sh b/tools/testing/selftests/drivers/net/mlxsw/hw_stats_l3.sh new file mode 100755 index 0000000000..941ba4c485 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/hw_stats_l3.sh @@ -0,0 +1,31 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + l3_monitor_test +" +NUM_NETIFS=0 +source $lib_dir/lib.sh + +swp=$NETIF_NO_CABLE + +cleanup() +{ + pre_cleanup +} + +l3_monitor_test() +{ + hw_stats_monitor_test $swp l3 \ + "ip addr add dev $swp 192.0.2.1/28" \ + "ip addr del dev $swp 192.0.2.1/28" +} + +trap cleanup EXIT + +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1d.sh b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1d.sh new file mode 100755 index 0000000000..7d7f862c80 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1d.sh @@ -0,0 +1,263 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test routing over bridge and verify that the order of configuration does not +# impact switch behavior. Verify that RIF is added correctly for existing +# mappings and that new mappings use the correct RIF. + +# +-------------------+ +--------------------+ +# | H1 | | H2 | +# | | | | +# | $h1.10 + | | + $h2.10 | +# | 192.0.2.1/28 | | | | 192.0.2.3/28 | +# | | | | | | +# | $h1 + | | + $h2 | +# +----------------|--+ +--|-----------------+ +# | | +# +----------------|-------------------------|-----------------+ +# | SW $swp1 + + $swp2 | +# | | | | +# | +--------------|-------------------------|---------------+ | +# | | $swp1.10 + + $swp2.10 | | +# | | | | +# | | br0 | | +# | | 192.0.2.2/28 | | +# | +--------------------------------------------------------+ | +# | | +# | $swp3.10 + | +# | 192.0.2.17/28 | | +# | | | +# | $swp3 + | +# +---------------|--------------------------------------------+ +# | +# +---------------|--+ +# | $h3 + | +# | | | +# | $h3.10 + | +# | 192.0.2.18/28 | +# | | +# | H3 | +# +------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + port_vid_map_rif + rif_port_vid_map +" + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 + vlan_create $h1 10 v$h1 192.0.2.1/28 + + ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 + + vlan_destroy $h1 10 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + vlan_create $h2 10 v$h2 192.0.2.3/28 +} + +h2_destroy() +{ + vlan_destroy $h2 10 + simple_if_fini $h2 +} + +h3_create() +{ + simple_if_init $h3 + vlan_create $h3 10 v$h3 192.0.2.18/28 + + ip route add 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 +} + +h3_destroy() +{ + ip route del 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 + + vlan_destroy $h3 10 + simple_if_fini $h3 +} + +switch_create() +{ + ip link set dev $swp1 up + + ip link add dev br0 type bridge mcast_snooping 0 + + # By default, a link-local address is generated when netdevice becomes + # up. Adding an address to the bridge will cause creating a RIF for it. + # Prevent generating link-local address to be able to control when the + # RIF is added. + sysctl_set net.ipv6.conf.br0.addr_gen_mode 1 + ip link set dev br0 up + + ip link set dev $swp2 up + vlan_create $swp2 10 + ip link set dev $swp2.10 master br0 + + ip link set dev $swp3 up + vlan_create $swp3 10 "" 192.0.2.17/28 + tc qdisc add dev $swp3 clsact + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev $swp3.10 192.0.2.18 lladdr $(mac_get $h3.10) +} + +switch_destroy() +{ + tc qdisc del dev $swp3 clsact + vlan_destroy $swp3 10 + ip link set dev $swp3 down + + ip link set dev $swp2.10 nomaster + vlan_destroy $swp2 10 + ip link set dev $swp2 down + + ip link set dev br0 down + sysctl_restore net.ipv6.conf.br0.addr_gen_mode + ip link del dev br0 + + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + vrf_prepare + forwarding_enable + + h1_create + h2_create + h3_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h3_destroy + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +bridge_rif_add() +{ + rifs_occ_t0=$(devlink_resource_occ_get rifs) + __addr_add_del br0 add 192.0.2.2/28 + rifs_occ_t1=$(devlink_resource_occ_get rifs) + + expected_rifs=$((rifs_occ_t0 + 1)) + + [[ $expected_rifs -eq $rifs_occ_t1 ]] + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + sleep 1 +} + +bridge_rif_del() +{ + __addr_add_del br0 del 192.0.2.2/28 +} + +port_vid_map_rif() +{ + RET=0 + + # First add {port, VID}->FID for $swp1.10, then add a RIF and verify + # that packets can be routed via the existing mapping. + vlan_create $swp1 10 + ip link set dev $swp1.10 master br0 + bridge_rif_add + + # The hardware matches on the first ethertype which is not VLAN, + # so the protocol should be IP. + tc filter add dev $swp3 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.18 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp3 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add RIF for existing {port, VID}->FID mapping" + + tc filter del dev $swp3 egress + + bridge_rif_del + ip link set dev $swp1.10 nomaster + vlan_destroy $swp1 10 +} + +rif_port_vid_map() +{ + RET=0 + + # First add an address to the bridge, which will create a RIF on top of + # it, then add a new {port, VID}->FID mapping and verify that packets + # can be routed via the new mapping. + bridge_rif_add + vlan_create $swp1 10 + ip link set dev $swp1.10 master br0 + + # The hardware matches on the first ethertype which is not VLAN, + # so the protocol should be IP. + tc filter add dev $swp3 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.18 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp3 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add {port, VID}->FID mapping for FID with a RIF" + + tc filter del dev $swp3 egress + + ip link set dev $swp1.10 nomaster + vlan_destroy $swp1 10 + bridge_rif_del +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1q.sh b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1q.sh new file mode 100755 index 0000000000..577293bab8 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1q.sh @@ -0,0 +1,264 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test routing over bridge and verify that the order of configuration does not +# impact switch behavior. Verify that RIF is added correctly for existing +# mapping and that packets can be routed via port which is added after the FID +# already has a RIF. + +# +-------------------+ +--------------------+ +# | H1 | | H2 | +# | | | | +# | $h1.10 + | | + $h2.10 | +# | 192.0.2.1/28 | | | | 192.0.2.3/28 | +# | | | | | | +# | $h1 + | | + $h2 | +# +----------------|--+ +--|-----------------+ +# | | +# +----------------|-------------------------|-----------------+ +# | SW | | | +# | +--------------|-------------------------|---------------+ | +# | | $swp1 + + $swp2 | | +# | | | | +# | | br0 | | +# | +--------------------------------------------------------+ | +# | | | +# | br0.10 | +# | 192.0.2.2/28 | +# | | +# | | +# | $swp3 + | +# | 192.0.2.17/28 | | +# +----------------|-------------------------------------------+ +# | +# +----------------|--+ +# | $h3 + | +# | 192.0.2.18/28 | +# | | +# | H3 | +# +-------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + vid_map_rif + rif_vid_map +" + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 + vlan_create $h1 10 v$h1 192.0.2.1/28 + + ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 + + vlan_destroy $h1 10 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + vlan_create $h2 10 v$h2 192.0.2.3/28 +} + +h2_destroy() +{ + vlan_destroy $h2 10 + simple_if_fini $h2 +} + +h3_create() +{ + simple_if_init $h3 192.0.2.18/28 + ip route add 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 +} + +h3_destroy() +{ + ip route del 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 + simple_if_fini $h3 192.0.2.18/28 +} + +switch_create() +{ + ip link set dev $swp1 up + + ip link add dev br0 type bridge vlan_filtering 1 mcast_snooping 0 + + # By default, a link-local address is generated when netdevice becomes + # up. Adding an address to the bridge will cause creating a RIF for it. + # Prevent generating link-local address to be able to control when the + # RIF is added. + sysctl_set net.ipv6.conf.br0.addr_gen_mode 1 + ip link set dev br0 up + + ip link set dev $swp2 up + ip link set dev $swp2 master br0 + bridge vlan add vid 10 dev $swp2 + + ip link set dev $swp3 up + __addr_add_del $swp3 add 192.0.2.17/28 + tc qdisc add dev $swp3 clsact + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev $swp3 192.0.2.18 lladdr $(mac_get $h3) +} + +switch_destroy() +{ + tc qdisc del dev $swp3 clsact + __addr_add_del $swp3 del 192.0.2.17/28 + ip link set dev $swp3 down + + bridge vlan del vid 10 dev $swp2 + ip link set dev $swp2 nomaster + ip link set dev $swp2 down + + ip link set dev br0 down + sysctl_restore net.ipv6.conf.br0.addr_gen_mode + ip link del dev br0 + + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + vrf_prepare + forwarding_enable + + h1_create + h2_create + h3_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h3_destroy + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +bridge_rif_add() +{ + rifs_occ_t0=$(devlink_resource_occ_get rifs) + vlan_create br0 10 "" 192.0.2.2/28 + rifs_occ_t1=$(devlink_resource_occ_get rifs) + + expected_rifs=$((rifs_occ_t0 + 1)) + + [[ $expected_rifs -eq $rifs_occ_t1 ]] + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + sleep 1 +} + +bridge_rif_del() +{ + vlan_destroy br0 10 +} + +vid_map_rif() +{ + RET=0 + + # First add VID->FID for vlan 10, then add a RIF and verify that + # packets can be routed via the existing mapping. + bridge vlan add vid 10 dev br0 self + ip link set dev $swp1 master br0 + bridge vlan add vid 10 dev $swp1 + + bridge_rif_add + + tc filter add dev $swp3 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.18 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp3 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add RIF for existing VID->FID mapping" + + tc filter del dev $swp3 egress + + bridge_rif_del + + bridge vlan del vid 10 dev $swp1 + ip link set dev $swp1 nomaster + bridge vlan del vid 10 dev br0 self +} + +rif_vid_map() +{ + RET=0 + + # Using 802.1Q, there is only one VID->FID map for each VID. That means + # that we cannot really check adding a new map for existing FID with a + # RIF. Verify that packets can be routed via port which is added after + # the FID already has a RIF, although in practice there is no new + # mapping in the hardware. + bridge vlan add vid 10 dev br0 self + bridge_rif_add + + ip link set dev $swp1 master br0 + bridge vlan add vid 10 dev $swp1 + + tc filter add dev $swp3 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.18 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp3 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add port to VID->FID mapping for FID with a RIF" + + tc filter del dev $swp3 egress + + bridge vlan del vid 10 dev $swp1 + ip link set dev $swp1 nomaster + + bridge_rif_del + bridge vlan del vid 10 dev br0 self +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_vxlan.sh b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_vxlan.sh new file mode 100755 index 0000000000..90450216a1 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_vxlan.sh @@ -0,0 +1,311 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test routing after VXLAN decapsulation and verify that the order of +# configuration does not impact switch behavior. Verify that RIF is added +# correctly for existing mapping and that new mapping uses the correct RIF. + +# +---------------------------+ +# | H1 | +# | + $h1 | +# | | 192.0.2.1/28 | +# +----|----------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 br1 | | +# | | vid 10 pvid untagged | | +# | | | | +# | | | | +# | | + vx4001 | | +# | | local 192.0.2.17 | | +# | | remote 192.0.2.18 | | +# | | id 104001 | | +# | | dstport $VXPORT | | +# | | vid 4001 pvid untagged | | +# | | | | +# | +----------------------------------+------------------------------------+ | +# | | | +# | +----------------------------------|------------------------------------+ | +# | | | | | +# | | +-------------------------------+---------------------------------+ | | +# | | | | | | +# | | + vlan10 vlan4001 + | | +# | | 192.0.2.2/28 | | +# | | | | +# | | vrf-green | | +# | +-----------------------------------------------------------------------+ | +# | | +# | + $rp1 +lo | +# | | 198.51.100.1/24 192.0.2.17/32 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | v$rp2 | +# | + $rp2 | +# | 198.51.100.2/24 | +# | | +# +-------------------------------------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + vni_fid_map_rif + rif_vni_fid_map +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +: ${VXPORT:=4789} +export VXPORT + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/28 +} + +switch_create() +{ + ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \ + mcast_snooping 0 + # Make sure the bridge uses the MAC address of the local port and not + # that of the VxLAN's device. + ip link set dev br1 address $(mac_get $swp1) + ip link set dev br1 up + + ip link set dev $rp1 up + ip address add dev $rp1 198.51.100.1/24 + + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + bridge vlan add vid 10 dev $swp1 pvid untagged + + tc qdisc add dev $swp1 clsact + + ip link add name vx4001 type vxlan id 104001 \ + local 192.0.2.17 dstport $VXPORT \ + nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx4001 up + + ip link set dev vx4001 master br1 + + ip address add 192.0.2.17/32 dev lo + + # Create SVIs. + vrf_create "vrf-green" + ip link set dev vrf-green up + + ip link add link br1 name vlan10 up master vrf-green type vlan id 10 + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev vlan10 192.0.2.1 lladdr $(mac_get $h1) + + ip address add 192.0.2.2/28 dev vlan10 + + bridge vlan add vid 10 dev br1 self + bridge vlan add vid 4001 dev br1 self + + sysctl_set net.ipv4.conf.all.rp_filter 0 +} + +switch_destroy() +{ + sysctl_restore net.ipv4.conf.all.rp_filter + + bridge vlan del vid 4001 dev br1 self + bridge vlan del vid 10 dev br1 self + + ip link del dev vlan10 + + vrf_destroy "vrf-green" + + ip address del 192.0.2.17/32 dev lo + + tc qdisc del dev $swp1 clsact + + bridge vlan del vid 10 dev $swp1 + ip link set dev $swp1 down + ip link set dev $swp1 nomaster + + ip link set dev vx4001 nomaster + + ip link set dev vx4001 down + ip link del dev vx4001 + + ip address del dev $rp1 198.51.100.1/24 + ip link set dev $rp1 down + + ip link set dev br1 down + ip link del dev br1 +} + +vrp2_create() +{ + simple_if_init $rp2 198.51.100.2/24 + + ip route add 192.0.2.17/32 vrf v$rp2 nexthop via 198.51.100.1 +} + +vrp2_destroy() +{ + ip route del 192.0.2.17/32 vrf v$rp2 nexthop via 198.51.100.1 + + simple_if_fini $rp2 198.51.100.2/24 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + + h1_create + switch_create + + vrp2_create +} + +cleanup() +{ + pre_cleanup + + vrp2_destroy + + switch_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +payload_get() +{ + local dest_mac=$(mac_get vlan4001) + local src_mac=$(mac_get $rp1) + + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"01:96:41:"$( : VXLAN VNI : 104001 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"$src_mac:"$( : ETH saddr + )"08:00:"$( : ETH type + )"45:"$( : IP version + IHL + )"00:"$( : IP TOS + )"00:54:"$( : IP total length + )"3f:49:"$( : IP identification + )"00:00:"$( : IP flags + frag off + )"3f:"$( : IP TTL + )"01:"$( : IP proto + )"50:21:"$( : IP header csum + )"c6:33:64:0a:"$( : IP saddr: 198.51.100.10 + )"c0:00:02:01:"$( : IP daddr: 192.0.2.1 + ) + echo $p +} + +vlan_rif_add() +{ + rifs_occ_t0=$(devlink_resource_occ_get rifs) + + ip link add link br1 name vlan4001 up master vrf-green \ + type vlan id 4001 + + rifs_occ_t1=$(devlink_resource_occ_get rifs) + expected_rifs=$((rifs_occ_t0 + 1)) + + [[ $expected_rifs -eq $rifs_occ_t1 ]] + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" +} + +vlan_rif_del() +{ + ip link del dev vlan4001 +} + +vni_fid_map_rif() +{ + local rp1_mac=$(mac_get $rp1) + + RET=0 + + # First add VNI->FID mapping to the FID of VLAN 4001 + bridge vlan add vid 4001 dev vx4001 pvid untagged + + # Add a RIF to the FID with VNI->FID mapping + vlan_rif_add + + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.1 action pass + + payload=$(payload_get) + ip vrf exec v$rp2 $MZ $rp2 -c 10 -d 1msec -b $rp1_mac \ + -B 192.0.2.17 -A 192.0.2.18 \ + -t udp sp=12345,dp=$VXPORT,p=$payload -q + + tc_check_at_least_x_packets "dev $swp1 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add RIF for existing VNI->FID mapping" + + tc filter del dev $swp1 egress + + bridge vlan del vid 4001 dev vx4001 pvid untagged + vlan_rif_del +} + +rif_vni_fid_map() +{ + local rp1_mac=$(mac_get $rp1) + + RET=0 + + # First add a RIF to the FID of VLAN 4001 + vlan_rif_add + + # Add VNI->FID mapping to FID with a RIF + bridge vlan add vid 4001 dev vx4001 pvid untagged + + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.1 action pass + + payload=$(payload_get) + ip vrf exec v$rp2 $MZ $rp2 -c 10 -d 1msec -b $rp1_mac \ + -B 192.0.2.17 -A 192.0.2.18 \ + -t udp sp=12345,dp=$VXPORT,p=$payload -q + + tc_check_at_least_x_packets "dev $swp1 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add VNI->FID mapping for FID with a RIF" + + tc filter del dev $swp1 egress + + bridge vlan del vid 4001 dev vx4001 pvid untagged + vlan_rif_del +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh new file mode 100755 index 0000000000..76f1ab4898 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh @@ -0,0 +1,217 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This test uses standard topology for testing gretap. See +# ../../../net/forwarding/mirror_gre_topo_lib.sh for more details. +# +# Test offloading various features of offloading gretap mirrors specific to +# mlxsw. + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/mirror_lib.sh +source $lib_dir/mirror_gre_lib.sh +source $lib_dir/mirror_gre_topo_lib.sh + +setup_keyful() +{ + tunnel_create gt6-key ip6gretap 2001:db8:3::1 2001:db8:3::2 \ + ttl 100 tos inherit allow-localremote \ + key 1234 + + tunnel_create h3-gt6-key ip6gretap 2001:db8:3::2 2001:db8:3::1 \ + key 1234 + ip link set h3-gt6-key vrf v$h3 + matchall_sink_create h3-gt6-key + + ip address add dev $swp3 2001:db8:3::1/64 + ip address add dev $h3 2001:db8:3::2/64 +} + +cleanup_keyful() +{ + ip address del dev $h3 2001:db8:3::2/64 + ip address del dev $swp3 2001:db8:3::1/64 + + tunnel_destroy h3-gt6-key + tunnel_destroy gt6-key +} + +setup_soft() +{ + # Set up a topology for testing underlay routes that point at an + # unsupported soft device. + + tunnel_create gt6-soft ip6gretap 2001:db8:4::1 2001:db8:4::2 \ + ttl 100 tos inherit allow-localremote + + tunnel_create h3-gt6-soft ip6gretap 2001:db8:4::2 2001:db8:4::1 + ip link set h3-gt6-soft vrf v$h3 + matchall_sink_create h3-gt6-soft + + ip link add name v1 type veth peer name v2 + ip link set dev v1 up + ip address add dev v1 2001:db8:4::1/64 + + ip link set dev v2 vrf v$h3 + ip link set dev v2 up + ip address add dev v2 2001:db8:4::2/64 +} + +cleanup_soft() +{ + ip link del dev v1 + + tunnel_destroy h3-gt6-soft + tunnel_destroy gt6-soft +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + vrf_prepare + mirror_gre_topo_create + + ip address add dev $swp3 2001:db8:2::1/64 + ip address add dev $h3 2001:db8:2::2/64 + + ip address add dev $swp3 192.0.2.129/28 + ip address add dev $h3 192.0.2.130/28 + + setup_keyful + setup_soft +} + +cleanup() +{ + pre_cleanup + + cleanup_soft + cleanup_keyful + + ip address del dev $h3 2001:db8:2::2/64 + ip address del dev $swp3 2001:db8:2::1/64 + + ip address del dev $h3 192.0.2.130/28 + ip address del dev $swp3 192.0.2.129/28 + + mirror_gre_topo_destroy + vrf_cleanup +} + +test_span_gre_ttl_inherit() +{ + local tundev=$1; shift + local type=$1; shift + local what=$1; shift + + RET=0 + + ip link set dev $tundev type $type ttl inherit + mirror_install $swp1 ingress $tundev "matchall $tcflags" + fail_test_span_gre_dir $tundev ingress + + ip link set dev $tundev type $type ttl 100 + + quick_test_span_gre_dir $tundev ingress + mirror_uninstall $swp1 ingress + + log_test "$what: no offload on TTL of inherit ($tcflags)" +} + +test_span_gre_tos_fixed() +{ + local tundev=$1; shift + local type=$1; shift + local what=$1; shift + + RET=0 + + ip link set dev $tundev type $type tos 0x10 + mirror_install $swp1 ingress $tundev "matchall $tcflags" + fail_test_span_gre_dir $tundev ingress + + ip link set dev $tundev type $type tos inherit + quick_test_span_gre_dir $tundev ingress + mirror_uninstall $swp1 ingress + + log_test "$what: no offload on a fixed TOS ($tcflags)" +} + +test_span_failable() +{ + local should_fail=$1; shift + local tundev=$1; shift + local what=$1; shift + + RET=0 + + mirror_install $swp1 ingress $tundev "matchall $tcflags" + if ((should_fail)); then + fail_test_span_gre_dir $tundev ingress + else + quick_test_span_gre_dir $tundev ingress + fi + mirror_uninstall $swp1 ingress + + log_test "$what: should_fail=$should_fail ($tcflags)" +} + +test_failable() +{ + local should_fail=$1; shift + + test_span_failable $should_fail gt6-key "mirror to keyful gretap" + test_span_failable $should_fail gt6-soft "mirror to gretap w/ soft underlay" +} + +test_sw() +{ + slow_path_trap_install $swp1 ingress + slow_path_trap_install $swp1 egress + + test_failable 0 + + slow_path_trap_uninstall $swp1 egress + slow_path_trap_uninstall $swp1 ingress +} + +test_hw() +{ + test_failable 1 + + test_span_gre_tos_fixed gt4 gretap "mirror to gretap" + test_span_gre_tos_fixed gt6 ip6gretap "mirror to ip6gretap" + + test_span_gre_ttl_inherit gt4 gretap "mirror to gretap" + test_span_gre_ttl_inherit gt6 ip6gretap "mirror to ip6gretap" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +if ! tc_offload_check; then + check_err 1 "Could not test offloaded functionality" + log_test "mlxsw-specific tests for mirror to gretap" + exit +fi + +tcflags="skip_hw" +test_sw + +tcflags="skip_sw" +test_hw + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh new file mode 100644 index 0000000000..e5589e2fca --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: GPL-2.0 + +# Test offloading a number of mirrors-to-gretap. The test creates a number of +# tunnels. Then it adds one flower mirror for each of the tunnels, matching a +# given host IP. Then it generates traffic at each of the host IPs and checks +# that the traffic has been mirrored at the appropriate tunnel. +# +# +--------------------------+ +--------------------------+ +# | H1 | | H2 | +# | + $h1 | | $h2 + | +# | | 2001:db8:1:X::1/64 | | 2001:db8:1:X::2/64 | | +# +-----|--------------------+ +--------------------|-----+ +# | | +# +-----|-------------------------------------------------------------|-----+ +# | SW o--> mirrors | | +# | +---|-------------------------------------------------------------|---+ | +# | | + $swp1 BR $swp2 + | | +# | +---------------------------------------------------------------------+ | +# | | +# | + $swp3 + gt6-<X> (ip6gretap) | +# | | 2001:db8:2:X::1/64 : loc=2001:db8:2:X::1 | +# | | : rem=2001:db8:2:X::2 | +# | | : ttl=100 | +# | | : tos=inherit | +# | | : | +# +-----|--------------------------------:----------------------------------+ +# | : +# +-----|--------------------------------:----------------------------------+ +# | H3 + $h3 + h3-gt6-<X> (ip6gretap) | +# | 2001:db8:2:X::2/64 loc=2001:db8:2:X::2 | +# | rem=2001:db8:2:X::1 | +# | ttl=100 | +# | tos=inherit | +# | | +# +-------------------------------------------------------------------------+ + +source ../../../../net/forwarding/mirror_lib.sh + +MIRROR_NUM_NETIFS=6 + +mirror_gre_ipv6_addr() +{ + local net=$1; shift + local num=$1; shift + + printf "2001:db8:%x:%x" $net $num +} + +mirror_gre_tunnels_create() +{ + local count=$1; shift + local should_fail=$1; shift + + MIRROR_GRE_BATCH_FILE="$(mktemp)" + for ((i=0; i < count; ++i)); do + local match_dip=$(mirror_gre_ipv6_addr 1 $i)::2 + local htun=h3-gt6-$i + local tun=gt6-$i + + ((mirror_gre_tunnels++)) + + ip address add dev $h1 $(mirror_gre_ipv6_addr 1 $i)::1/64 + ip address add dev $h2 $(mirror_gre_ipv6_addr 1 $i)::2/64 + + ip address add dev $swp3 $(mirror_gre_ipv6_addr 2 $i)::1/64 + ip address add dev $h3 $(mirror_gre_ipv6_addr 2 $i)::2/64 + + tunnel_create $tun ip6gretap \ + $(mirror_gre_ipv6_addr 2 $i)::1 \ + $(mirror_gre_ipv6_addr 2 $i)::2 \ + ttl 100 tos inherit allow-localremote + + tunnel_create $htun ip6gretap \ + $(mirror_gre_ipv6_addr 2 $i)::2 \ + $(mirror_gre_ipv6_addr 2 $i)::1 + ip link set $htun vrf v$h3 + matchall_sink_create $htun + + cat >> $MIRROR_GRE_BATCH_FILE <<-EOF + filter add dev $swp1 ingress pref 1000 \ + protocol ipv6 \ + flower $tcflags dst_ip $match_dip \ + action mirred egress mirror dev $tun + EOF + done + + tc -b $MIRROR_GRE_BATCH_FILE + check_err_fail $should_fail $? "Mirror rule insertion" +} + +mirror_gre_tunnels_destroy() +{ + local count=$1; shift + + for ((i=0; i < count; ++i)); do + local htun=h3-gt6-$i + local tun=gt6-$i + + ip address del dev $h3 $(mirror_gre_ipv6_addr 2 $i)::2/64 + ip address del dev $swp3 $(mirror_gre_ipv6_addr 2 $i)::1/64 + + ip address del dev $h2 $(mirror_gre_ipv6_addr 1 $i)::2/64 + ip address del dev $h1 $(mirror_gre_ipv6_addr 1 $i)::1/64 + + tunnel_destroy $htun + tunnel_destroy $tun + done +} + +__mirror_gre_test() +{ + local count=$1; shift + local should_fail=$1; shift + + mirror_gre_tunnels_create $count $should_fail + if ((should_fail)); then + return + fi + + sleep 5 + + for ((i = 0; i < count; ++i)); do + local sip=$(mirror_gre_ipv6_addr 1 $i)::1 + local dip=$(mirror_gre_ipv6_addr 1 $i)::2 + local htun=h3-gt6-$i + local message + + icmp6_capture_install $htun + mirror_test v$h1 $sip $dip $htun 100 10 + icmp6_capture_uninstall $htun + done +} + +mirror_gre_test() +{ + local count=$1; shift + local should_fail=$1; shift + + if ! tc_offload_check $TC_FLOWER_NUM_NETIFS; then + check_err 1 "Could not test offloaded functionality" + return + fi + + tcflags="skip_sw" + __mirror_gre_test $count $should_fail +} + +mirror_gre_setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + mirror_gre_tunnels=0 + + vrf_prepare + + simple_if_init $h1 + simple_if_init $h2 + simple_if_init $h3 + + ip link add name br1 type bridge vlan_filtering 1 + ip link set dev br1 addrgenmode none + ip link set dev br1 up + + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + tc qdisc add dev $swp1 clsact + + ip link set dev $swp2 master br1 + ip link set dev $swp2 up + + ip link set dev $swp3 up +} + +mirror_gre_cleanup() +{ + mirror_gre_tunnels_destroy $mirror_gre_tunnels + + ip link set dev $swp3 down + + ip link set dev $swp2 down + + tc qdisc del dev $swp1 clsact + ip link set dev $swp1 down + + ip link del dev br1 + + simple_if_fini $h3 + simple_if_fini $h2 + simple_if_fini $h1 + + vrf_cleanup +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh b/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh new file mode 100644 index 0000000000..6369927e9c --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh @@ -0,0 +1,77 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +############################################################################## +# Defines + +if [[ ! -v MLXSW_CHIP ]]; then + MLXSW_CHIP=$(devlink -j dev info $DEVLINK_DEV | jq -r '.[][]["driver"]') + if [ -z "$MLXSW_CHIP" ]; then + echo "SKIP: Device $DEVLINK_DEV doesn't support devlink info command" + exit 1 + fi +fi + +MLXSW_SPECTRUM_REV=$(case $MLXSW_CHIP in + mlxsw_spectrum) + echo 1 ;; + mlxsw_spectrum*) + echo ${MLXSW_CHIP#mlxsw_spectrum} ;; + *) + echo "Couldn't determine Spectrum chip revision." \ + > /dev/stderr ;; + esac) + +mlxsw_on_spectrum() +{ + local rev=$1; shift + local op="==" + local rev2=${rev%+} + + if [[ $rev2 != $rev ]]; then + op=">=" + fi + + ((MLXSW_SPECTRUM_REV $op rev2)) +} + +__mlxsw_only_on_spectrum() +{ + local rev=$1; shift + local caller=$1; shift + local src=$1; shift + + if ! mlxsw_on_spectrum "$rev"; then + log_test_skip $src:$caller "(Spectrum-$rev only)" + return 1 + fi +} + +mlxsw_only_on_spectrum() +{ + local caller=${FUNCNAME[1]} + local src=${BASH_SOURCE[1]} + local rev + + for rev in "$@"; do + if __mlxsw_only_on_spectrum "$rev" "$caller" "$src"; then + return 0 + fi + done + + return 1 +} + +mlxsw_max_descriptors_get() +{ + local spectrum_rev=$MLXSW_SPECTRUM_REV + + case $spectrum_rev in + 1) echo 81920 ;; + 2) echo 136960 ;; + 3) echo 204800 ;; + 4) echo 220000 ;; + *) echo "Unknown max descriptors for chip revision." > /dev/stderr + return 1 ;; + esac +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/one_armed_router.sh b/tools/testing/selftests/drivers/net/mlxsw/one_armed_router.sh new file mode 100755 index 0000000000..fca0e1e642 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/one_armed_router.sh @@ -0,0 +1,260 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test a "one-armed router" [1] scenario. Packets forwarded between H1 and H2 +# should be forwarded by the ASIC, but also trapped so that ICMP redirect +# packets could be potentially generated. +# +# 1. https://en.wikipedia.org/wiki/One-armed_router +# +# +---------------------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 192.0.2.1/24 | +# | | 2001:db8:1::1/64 | +# | | | +# | | default via 192.0.2.2 | +# | | default via 2001:db8:1::2 | +# +----|----------------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 BR0 (802.1d) | | +# | | | | +# | | 192.0.2.2/24 | | +# | | 2001:db8:1::2/64 | | +# | | 198.51.100.2/24 | | +# | | 2001:db8:2::2/64 | | +# | | | | +# | | + $swp2 | | +# | +--|--------------------------------------------------------------------+ | +# | | | +# +----|----------------------------------------------------------------------+ +# | +# +----|----------------------------+ +# | | default via 198.51.100.2 | +# | | default via 2001:db8:2::2 | +# | | | +# | | 2001:db8:2::1/64 | +# | | 198.51.100.1/24 | +# | + $h2 | +# | H2 (vrf) | +# +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS="ping_ipv4 ping_ipv6 fwd_mark_ipv4 fwd_mark_ipv6" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 + ip -6 route add default vrf v$h1 nexthop via 2001:db8:1::2 +} + +h1_destroy() +{ + ip -6 route del default vrf v$h1 nexthop via 2001:db8:1::2 + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/24 2001:db8:2::1/64 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 + ip -6 route add default vrf v$h2 nexthop via 2001:db8:2::2 +} + +h2_destroy() +{ + ip -6 route del default vrf v$h2 nexthop via 2001:db8:2::2 + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + simple_if_fini $h2 198.51.100.1/24 2001:db8:2::1/64 +} + +switch_create() +{ + ip link add name br0 address $(mac_get $swp1) \ + type bridge mcast_snooping 0 + ip link set dev br0 up + + ip link set dev $swp1 master br0 + ip link set dev $swp1 up + ip link set dev $swp2 master br0 + ip link set dev $swp2 up + + tc qdisc add dev $swp1 clsact + tc qdisc add dev $swp2 clsact + + __addr_add_del br0 add 192.0.2.2/24 2001:db8:1::2/64 + __addr_add_del br0 add 198.51.100.2/24 2001:db8:2::2/64 +} + +switch_destroy() +{ + __addr_add_del br0 del 198.51.100.2/24 2001:db8:2::2/64 + __addr_add_del br0 del 192.0.2.2/24 2001:db8:1::2/64 + + tc qdisc del dev $swp2 clsact + tc qdisc del dev $swp1 clsact + + ip link set dev $swp2 down + ip link set dev $swp2 nomaster + ip link set dev $swp1 down + ip link set dev $swp1 nomaster + + ip link set dev br0 down + ip link del dev br0 +} + +ping_ipv4() +{ + ping_test $h1 198.51.100.1 ": h1->h2" +} + +ping_ipv6() +{ + ping6_test $h1 2001:db8:2::1 ": h1->h2" +} + +fwd_mark_ipv4() +{ + # Transmit packets from H1 to H2 and make sure they are trapped at + # swp1 due to loopback error, but only forwarded by the ASIC through + # swp2 + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \ + skip_hw dst_ip 198.51.100.1 ip_proto udp dst_port 52768 \ + action pass + + tc filter add dev $swp2 egress protocol ip pref 1 handle 101 flower \ + skip_hw dst_ip 198.51.100.1 ip_proto udp dst_port 52768 \ + action pass + + tc filter add dev $swp2 egress protocol ip pref 2 handle 102 flower \ + skip_sw dst_ip 198.51.100.1 ip_proto udp dst_port 52768 \ + action pass + + ip vrf exec v$h1 $MZ $h1 -c 10 -d 100msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + RET=0 + + tc_check_packets "dev $swp1 ingress" 101 10 + check_err $? + + log_test "fwd mark: trapping IPv4 packets due to LBERROR" + + RET=0 + + tc_check_packets "dev $swp2 egress" 101 0 + check_err $? + + log_test "fwd mark: forwarding IPv4 packets in software" + + RET=0 + + tc_check_packets "dev $swp2 egress" 102 10 + check_err $? + + log_test "fwd mark: forwarding IPv4 packets in hardware" + + tc filter del dev $swp2 egress protocol ip pref 2 handle 102 flower + tc filter del dev $swp2 egress protocol ip pref 1 handle 101 flower + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower +} + +fwd_mark_ipv6() +{ + tc filter add dev $swp1 ingress protocol ipv6 pref 1 handle 101 flower \ + skip_hw dst_ip 2001:db8:2::1 ip_proto udp dst_port 52768 \ + action pass + + tc filter add dev $swp2 egress protocol ipv6 pref 1 handle 101 flower \ + skip_hw dst_ip 2001:db8:2::1 ip_proto udp dst_port 52768 \ + action pass + + tc filter add dev $swp2 egress protocol ipv6 pref 2 handle 102 flower \ + skip_sw dst_ip 2001:db8:2::1 ip_proto udp dst_port 52768 \ + action pass + + ip vrf exec v$h1 $MZ $h1 -6 -c 10 -d 100msec -p 64 -A 2001:db8:1::1 \ + -B 2001:db8:2::1 -t udp dp=52768,sp=42768 -q + + RET=0 + + tc_check_packets "dev $swp1 ingress" 101 10 + check_err $? + + log_test "fwd mark: trapping IPv6 packets due to LBERROR" + + RET=0 + + tc_check_packets "dev $swp2 egress" 101 0 + check_err $? + + log_test "fwd mark: forwarding IPv6 packets in software" + + RET=0 + + tc_check_packets "dev $swp2 egress" 102 10 + check_err $? + + log_test "fwd mark: forwarding IPv6 packets in hardware" + + tc filter del dev $swp2 egress protocol ipv6 pref 2 handle 102 flower + tc filter del dev $swp2 egress protocol ipv6 pref 1 handle 101 flower + tc filter del dev $swp1 ingress protocol ipv6 pref 1 handle 101 flower +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + + sysctl_set net.ipv4.conf.all.accept_redirects 0 + sysctl_set net.ipv6.conf.all.accept_redirects 0 + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + + sysctl_restore net.ipv6.conf.all.accept_redirects + sysctl_restore net.ipv4.conf.all.accept_redirects + + forwarding_restore + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/port_range_occ.sh b/tools/testing/selftests/drivers/net/mlxsw/port_range_occ.sh new file mode 100755 index 0000000000..b1f0781f6b --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/port_range_occ.sh @@ -0,0 +1,111 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test that filters that match on the same port range, but with different +# combination of IPv4/IPv6 and TCP/UDP all use the same port range register by +# observing port range registers' occupancy via devlink-resource. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + port_range_occ_test +" +NUM_NETIFS=2 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 +} + +h1_destroy() +{ + simple_if_fini $h1 +} + +switch_create() +{ + simple_if_init $swp1 + tc qdisc add dev $swp1 clsact +} + +switch_destroy() +{ + tc qdisc del dev $swp1 clsact + simple_if_fini $swp1 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + vrf_prepare + + h1_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h1_destroy + + vrf_cleanup +} + +port_range_occ_get() +{ + devlink_resource_occ_get port_range_registers +} + +port_range_occ_test() +{ + RET=0 + + local occ=$(port_range_occ_get) + + # Two port range registers are used, for source and destination port + # ranges. + tc filter add dev $swp1 ingress pref 1 handle 101 proto ip \ + flower skip_sw ip_proto udp src_port 1-100 dst_port 1-100 \ + action pass + (( occ + 2 == $(port_range_occ_get) )) + check_err $? "Got occupancy $(port_range_occ_get), expected $((occ + 2))" + + tc filter add dev $swp1 ingress pref 1 handle 102 proto ip \ + flower skip_sw ip_proto tcp src_port 1-100 dst_port 1-100 \ + action pass + tc filter add dev $swp1 ingress pref 2 handle 103 proto ipv6 \ + flower skip_sw ip_proto udp src_port 1-100 dst_port 1-100 \ + action pass + tc filter add dev $swp1 ingress pref 2 handle 104 proto ipv6 \ + flower skip_sw ip_proto tcp src_port 1-100 dst_port 1-100 \ + action pass + (( occ + 2 == $(port_range_occ_get) )) + check_err $? "Got occupancy $(port_range_occ_get), expected $((occ + 2))" + + tc filter del dev $swp1 ingress pref 2 handle 104 flower + tc filter del dev $swp1 ingress pref 2 handle 103 flower + tc filter del dev $swp1 ingress pref 1 handle 102 flower + (( occ + 2 == $(port_range_occ_get) )) + check_err $? "Got occupancy $(port_range_occ_get), expected $((occ + 2))" + + tc filter del dev $swp1 ingress pref 1 handle 101 flower + (( occ == $(port_range_occ_get) )) + check_err $? "Got occupancy $(port_range_occ_get), expected $occ" + + log_test "port range occupancy" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/port_range_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/port_range_scale.sh new file mode 100644 index 0000000000..2a70840ff1 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/port_range_scale.sh @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0 + +PORT_RANGE_NUM_NETIFS=2 + +port_range_h1_create() +{ + simple_if_init $h1 +} + +port_range_h1_destroy() +{ + simple_if_fini $h1 +} + +port_range_switch_create() +{ + simple_if_init $swp1 + tc qdisc add dev $swp1 clsact +} + +port_range_switch_destroy() +{ + tc qdisc del dev $swp1 clsact + simple_if_fini $swp1 +} + +port_range_rules_create() +{ + local count=$1; shift + local should_fail=$1; shift + local batch_file="$(mktemp)" + + for ((i = 0; i < count; ++i)); do + cat >> $batch_file <<-EOF + filter add dev $swp1 ingress \ + prot ipv4 \ + pref 1000 \ + flower skip_sw \ + ip_proto udp dst_port 1-$((100 + i)) \ + action pass + EOF + done + + tc -b $batch_file + check_err_fail $should_fail $? "Rule insertion" + + rm -f $batch_file +} + +__port_range_test() +{ + local count=$1; shift + local should_fail=$1; shift + + port_range_rules_create $count $should_fail + + offload_count=$(tc -j filter show dev $swp1 ingress | + jq "[.[] | select(.options.in_hw == true)] | length") + ((offload_count == count)) + check_err_fail $should_fail $? "port range offload count" +} + +port_range_test() +{ + local count=$1; shift + local should_fail=$1; shift + + if ! tc_offload_check $PORT_RANGE_NUM_NETIFS; then + check_err 1 "Could not test offloaded functionality" + return + fi + + __port_range_test $count $should_fail +} + +port_range_setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + vrf_prepare + + port_range_h1_create + port_range_switch_create +} + +port_range_cleanup() +{ + pre_cleanup + + port_range_switch_destroy + port_range_h1_destroy + + vrf_cleanup +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh new file mode 100644 index 0000000000..1e9a4aff76 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh @@ -0,0 +1,62 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for physical ports resource. The test splits each splittable port +# to its width and checks that eventually the number of physical ports equals +# the maximum number of physical ports. + +PORT_NUM_NETIFS=0 + +declare -a unsplit + +port_setup_prepare() +{ + : +} + +port_cleanup() +{ + pre_cleanup + + for port in "${unsplit[@]}"; do + devlink port unsplit $port + check_err $? "Did not unsplit $netdev" + done + unsplit=() +} + +split_all_ports() +{ + local should_fail=$1; shift + + # Loop over the splittable netdevs and create tuples of netdev along + # with its width. For example: + # '$netdev1 $count1 $netdev2 $count2...', when: + # $netdev1-2 are splittable netdevs in the device, and + # $count1-2 are the netdevs width respectively. + while read netdev count <<<$( + devlink -j port show | + jq -r '.[][] | select(.splittable==true) | "\(.netdev) \(.lanes)"' + ) + [[ ! -z $netdev ]] + do + devlink port split $netdev count $count + check_err $? "Did not split $netdev into $count" + unsplit+=( "${netdev}s0" ) + done +} + +port_test() +{ + local max_ports=$1; shift + local should_fail=$1; shift + + split_all_ports $should_fail + + occ=$(devlink -j resource show $DEVLINK_DEV \ + | jq '.[][][] | select(.name=="physical_ports") |.["occ"]') + + [[ $occ -eq $max_ports ]] + check_err_fail $should_fail $? "Attempt to create $max_ports ports (actual result $occ)" + +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh b/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh new file mode 100755 index 0000000000..00d55b0e98 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh @@ -0,0 +1,304 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + create_8021ad_vlan_upper_on_top_front_panel_port + create_8021ad_vlan_upper_on_top_bridge_port + create_8021ad_vlan_upper_on_top_lag + create_8021ad_vlan_upper_on_top_bridge + create_8021ad_vlan_upper_on_top_8021ad_bridge + create_vlan_upper_on_top_8021ad_bridge + create_vlan_upper_on_top_front_panel_enslaved_to_8021ad_bridge + create_vlan_upper_on_top_lag_enslaved_to_8021ad_bridge + enslave_front_panel_with_vlan_upper_to_8021ad_bridge + enslave_lag_with_vlan_upper_to_8021ad_bridge + add_ip_address_to_8021ad_bridge + switch_bridge_protocol_from_8021q_to_8021ad +" +NUM_NETIFS=2 +source $lib_dir/lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up + + sleep 10 +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +create_vlan_upper_on_top_of_bridge() +{ + RET=0 + + local bridge_proto=$1; shift + local netdev_proto=$1; shift + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol $bridge_proto vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none + + ip link set dev br0 up + ip link set dev $swp1 master br0 + + ip link add name br0.100 link br0 type vlan \ + protocol $netdev_proto id 100 2>/dev/null + check_fail $? "$netdev_proto vlan upper creation on top of an $bridge_proto bridge not rejected" + + ip link add name br0.100 link br0 type vlan \ + protocol $netdev_proto id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "$netdev_proto vlan upper creation on top of an $bridge_proto bridge rejected without extack" + + log_test "create $netdev_proto vlan upper on top $bridge_proto bridge" + + ip link del dev br0 +} + +create_8021ad_vlan_upper_on_top_front_panel_port() +{ + RET=0 + + ip link add name $swp1.100 link $swp1 type vlan \ + protocol 802.1ad id 100 2>/dev/null + check_fail $? "802.1ad vlan upper creation on top of a front panel not rejected" + + ip link add name $swp1.100 link $swp1 type vlan \ + protocol 802.1ad id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "802.1ad vlan upper creation on top of a front panel rejected without extack" + + log_test "create 802.1ad vlan upper on top of a front panel" +} + +create_8021ad_vlan_upper_on_top_bridge_port() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none + + ip link set dev $swp1 master br0 + ip link set dev br0 up + + ip link add name $swp1.100 link $swp1 type vlan \ + protocol 802.1ad id 100 2>/dev/null + check_fail $? "802.1ad vlan upper creation on top of a bridge port not rejected" + + ip link add name $swp1.100 link $swp1 type vlan \ + protocol 802.1ad id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "802.1ad vlan upper creation on top of a bridge port rejected without extack" + + log_test "create 802.1ad vlan upper on top of a bridge port" + + ip link del dev br0 +} + +create_8021ad_vlan_upper_on_top_lag() +{ + RET=0 + + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp1 master bond1 + + ip link add name bond1.100 link bond1 type vlan \ + protocol 802.1ad id 100 2>/dev/null + check_fail $? "802.1ad vlan upper creation on top of a lag not rejected" + + ip link add name bond1.100 link bond1 type vlan \ + protocol 802.1ad id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "802.1ad vlan upper creation on top of a lag rejected without extack" + + log_test "create 802.1ad vlan upper on top of a lag" + + ip link del dev bond1 +} + +create_8021ad_vlan_upper_on_top_bridge() +{ + RET=0 + + create_vlan_upper_on_top_of_bridge "802.1q" "802.1ad" +} + +create_8021ad_vlan_upper_on_top_8021ad_bridge() +{ + RET=0 + + create_vlan_upper_on_top_of_bridge "802.1ad" "802.1ad" +} + +create_vlan_upper_on_top_8021ad_bridge() +{ + RET=0 + + create_vlan_upper_on_top_of_bridge "802.1ad" "802.1q" +} + +create_vlan_upper_on_top_front_panel_enslaved_to_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none + ip link set dev br0 up + + ip link set dev $swp1 master br0 + + ip link add name $swp1.100 link $swp1 type vlan id 100 2>/dev/null + check_fail $? "vlan upper creation on top of front panel enslaved to 802.1ad bridge not rejected" + + ip link add name $swp1.100 link $swp1 type vlan id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "vlan upper creation on top of front panel enslaved to 802.1ad bridge rejected without extack" + + log_test "create vlan upper on top of front panel enslaved to 802.1ad bridge" + + ip link del dev br0 +} + +create_vlan_upper_on_top_lag_enslaved_to_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none + ip link set dev br0 up + + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp1 master bond1 + ip link set dev bond1 master br0 + + ip link add name bond1.100 link bond1 type vlan id 100 2>/dev/null + check_fail $? "vlan upper creation on top of lag enslaved to 802.1ad bridge not rejected" + + ip link add name bond1.100 link bond1 type vlan id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "vlan upper creation on top of lag enslaved to 802.1ad bridge rejected without extack" + + log_test "create vlan upper on top of lag enslaved to 802.1ad bridge" + + ip link del dev bond1 + ip link del dev br0 +} + +enslave_front_panel_with_vlan_upper_to_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none + ip link set dev br0 up + + ip link add name $swp1.100 link $swp1 type vlan id 100 + + ip link set dev $swp1 master br0 2>/dev/null + check_fail $? "front panel with vlan upper enslavemnt to 802.1ad bridge not rejected" + + ip link set dev $swp1 master br0 2>&1 >/dev/null | grep -q mlxsw_spectrum + check_err $? "front panel with vlan upper enslavemnt to 802.1ad bridge rejected without extack" + + log_test "enslave front panel with vlan upper to 802.1ad bridge" + + ip link del dev $swp1.100 + ip link del dev br0 +} + +enslave_lag_with_vlan_upper_to_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none + ip link set dev br0 up + + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp1 master bond1 + ip link add name bond1.100 link bond1 type vlan id 100 + + ip link set dev bond1 master br0 2>/dev/null + check_fail $? "lag with vlan upper enslavemnt to 802.1ad bridge not rejected" + + ip link set dev bond1 master br0 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "lag with vlan upper enslavemnt to 802.1ad bridge rejected without extack" + + log_test "enslave lag with vlan upper to 802.1ad bridge" + + ip link del dev bond1 + ip link del dev br0 +} + + +add_ip_address_to_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none + + ip link set dev br0 up + ip link set dev $swp1 master br0 + + ip addr add dev br0 192.0.2.17/28 2>/dev/null + check_fail $? "IP address addition to 802.1ad bridge not rejected" + + ip addr add dev br0 192.0.2.17/28 2>&1 >/dev/null | grep -q mlxsw_spectrum + check_err $? "IP address addition to 802.1ad bridge rejected without extack" + + log_test "IP address addition to 802.1ad bridge" + + ip link del dev br0 +} + +switch_bridge_protocol_from_8021q_to_8021ad() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none + + ip link set dev br0 up + ip link set dev $swp1 master br0 + + ip link set dev br0 type bridge vlan_protocol 802.1q 2>/dev/null + check_fail $? "switching bridge protocol from 802.1q to 802.1ad not rejected" + + log_test "switch bridge protocol" + + ip link del dev br0 +} + + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh new file mode 100755 index 0000000000..5492fa5550 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh @@ -0,0 +1,130 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for port-default priority. Non-IP packets ingress $swp1 and are +# prioritized according to the default priority specified at the port. +# rx_octets_prio_* counters are used to verify the prioritization. +# +# +----------------------------------+ +# | H1 | +# | + $h1 | +# | | 192.0.2.1/28 | +# +----|-----------------------------+ +# | +# +----|-----------------------------+ +# | SW | | +# | + $swp1 | +# | 192.0.2.2/28 | +# | dcb app default-prio <prio> | +# +----------------------------------+ + +ALL_TESTS=" + ping_ipv4 + test_defprio +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=2 +: ${HIT_TIMEOUT:=1000} # ms +source $lib_dir/lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/28 +} + +switch_create() +{ + ip link set dev $swp1 up + ip addr add dev $swp1 192.0.2.2/28 +} + +switch_destroy() +{ + dcb app flush dev $swp1 default-prio + ip addr del dev $swp1 192.0.2.2/28 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + vrf_prepare + + h1_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.2 +} + +__test_defprio() +{ + local prio_install=$1; shift + local prio_observe=$1; shift + local key + local t1 + local i + + RET=0 + + dcb app add dev $swp1 default-prio $prio_install + + local t0=$(ethtool_stats_get $swp1 rx_frames_prio_$prio_observe) + mausezahn -q $h1 -d 100m -c 10 -t arp reply + t1=$(busywait "$HIT_TIMEOUT" until_counter_is ">= $((t0 + 10))" \ + ethtool_stats_get $swp1 rx_frames_prio_$prio_observe) + + check_err $? "Default priority $prio_install/$prio_observe: Expected to capture 10 packets, got $((t1 - t0))." + log_test "Default priority $prio_install/$prio_observe" + + dcb app del dev $swp1 default-prio $prio_install +} + +test_defprio() +{ + local prio + + for prio in {0..7}; do + __test_defprio $prio $prio + done + + dcb app add dev $swp1 default-prio 3 + __test_defprio 0 3 + __test_defprio 1 3 + __test_defprio 2 3 + __test_defprio 4 4 + __test_defprio 5 5 + __test_defprio 6 6 + __test_defprio 7 7 + dcb app del dev $swp1 default-prio 3 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh new file mode 100755 index 0000000000..914c63d631 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh @@ -0,0 +1,182 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for DSCP prioritization and rewrite. Packets ingress $swp1 with a DSCP +# tag and are prioritized according to the map at $swp1. They egress $swp2 and +# the DSCP value is updated to match the map at that interface. The updated DSCP +# tag is verified at $h2. +# +# ICMP responses are produced with the same DSCP tag that arrived at $h2. They +# go through prioritization at $swp2 and DSCP retagging at $swp1. The tag is +# verified at $h1--it should match the original tag. +# +# +----------------------+ +----------------------+ +# | H1 | | H2 | +# | + $h1 | | $h2 + | +# | | 192.0.2.1/28 | | 192.0.2.2/28 | | +# +----|-----------------+ +----------------|-----+ +# | | +# +----|----------------------------------------------------------------|-----+ +# | SW | | | +# | +-|----------------------------------------------------------------|-+ | +# | | + $swp1 BR $swp2 + | | +# | | dcb dscp-prio 10:0...17:7 dcb dscp-prio 20:0...27:7 | | +# | +--------------------------------------------------------------------+ | +# +---------------------------------------------------------------------------+ + +ALL_TESTS=" + ping_ipv4 + test_dscp +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=4 +source $lib_dir/lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 + tc qdisc add dev $h1 clsact + dscp_capture_install $h1 10 +} + +h1_destroy() +{ + dscp_capture_uninstall $h1 10 + tc qdisc del dev $h1 clsact + simple_if_fini $h1 192.0.2.1/28 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/28 + tc qdisc add dev $h2 clsact + dscp_capture_install $h2 20 +} + +h2_destroy() +{ + dscp_capture_uninstall $h2 20 + tc qdisc del dev $h2 clsact + simple_if_fini $h2 192.0.2.2/28 +} + +switch_create() +{ + ip link add name br1 type bridge vlan_filtering 1 + ip link set dev br1 addrgenmode none + ip link set dev br1 up + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + ip link set dev $swp2 master br1 + ip link set dev $swp2 up + + dcb app add dev $swp1 dscp-prio 10:0 11:1 12:2 13:3 14:4 15:5 16:6 17:7 + dcb app add dev $swp2 dscp-prio 20:0 21:1 22:2 23:3 24:4 25:5 26:6 27:7 +} + +switch_destroy() +{ + dcb app del dev $swp2 dscp-prio 20:0 21:1 22:2 23:3 24:4 25:5 26:6 27:7 + dcb app del dev $swp1 dscp-prio 10:0 11:1 12:2 13:3 14:4 15:5 16:6 17:7 + + ip link set dev $swp2 down + ip link set dev $swp2 nomaster + ip link set dev $swp1 down + ip link set dev $swp1 nomaster + ip link del dev br1 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.2 +} + +dscp_ping_test() +{ + local vrf_name=$1; shift + local sip=$1; shift + local dip=$1; shift + local prio=$1; shift + local dev_10=$1; shift + local dev_20=$1; shift + local key + + local dscp_10=$(((prio + 10) << 2)) + local dscp_20=$(((prio + 20) << 2)) + + RET=0 + + local -A t0s + eval "t0s=($(dscp_fetch_stats $dev_10 10) + $(dscp_fetch_stats $dev_20 20))" + + local ping_timeout=$((PING_TIMEOUT * 5)) + ip vrf exec $vrf_name \ + ${PING} -Q $dscp_10 ${sip:+-I $sip} $dip \ + -c 10 -i 0.5 -w $ping_timeout &> /dev/null + + local -A t1s + eval "t1s=($(dscp_fetch_stats $dev_10 10) + $(dscp_fetch_stats $dev_20 20))" + + for key in ${!t0s[@]}; do + local expect + if ((key == prio+10 || key == prio+20)); then + expect=10 + else + expect=0 + fi + + local delta=$((t1s[$key] - t0s[$key])) + ((expect == delta)) + check_err $? "DSCP $key: Expected to capture $expect packets, got $delta." + done + + log_test "DSCP rewrite: $dscp_10-(prio $prio)-$dscp_20" +} + +test_dscp() +{ + local prio + + for prio in {0..7}; do + dscp_ping_test v$h1 192.0.2.1 192.0.2.2 $prio $h1 $h2 + done +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh new file mode 100755 index 0000000000..f6c23f8442 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh @@ -0,0 +1,269 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for DSCP prioritization in the router. +# +# With ip_forward_update_priority disabled, the packets are expected to keep +# their DSCP (which in this test uses only values 0..7) intact as they are +# forwarded by the switch. That is verified at $h2. ICMP responses are formed +# with the same DSCP as the requests, and likewise pass through the switch +# intact, which is verified at $h1. +# +# With ip_forward_update_priority enabled, router reprioritizes the packets +# according to the table in reprioritize(). Thus, say, DSCP 7 maps to priority +# 4, which on egress maps back to DSCP 4. The response packet then gets +# reprioritized to 6, getting DSCP 6 on egress. +# +# +----------------------+ +----------------------+ +# | H1 | | H2 | +# | + $h1 | | $h2 + | +# | | 192.0.2.1/28 | | 192.0.2.18/28 | | +# +----|-----------------+ +----------------|-----+ +# | | +# +----|----------------------------------------------------------------|-----+ +# | SW | | | +# | + $swp1 $swp2 + | +# | 192.0.2.2/28 192.0.2.17/28 | +# | APP=0,5,0 .. 7,5,7 APP=0,5,0 .. 7,5,7 | +# +---------------------------------------------------------------------------+ + +ALL_TESTS=" + ping_ipv4 + test_update + test_no_update + test_pedit_norewrite + test_dscp_leftover +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=4 +source $lib_dir/lib.sh + +reprioritize() +{ + local in=$1; shift + + # This is based on rt_tos2priority in include/net/route.h. Assuming 1:1 + # mapping between priorities and TOS, it yields a new priority for a + # packet with ingress priority of $in. + local -a reprio=(0 0 2 2 6 6 4 4) + + echo ${reprio[$in]} +} + +zero() +{ + echo 0 +} + +three() +{ + echo 3 +} + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 + tc qdisc add dev $h1 clsact + dscp_capture_install $h1 0 + ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2 +} + +h1_destroy() +{ + ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2 + dscp_capture_uninstall $h1 0 + tc qdisc del dev $h1 clsact + simple_if_fini $h1 192.0.2.1/28 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.18/28 + tc qdisc add dev $h2 clsact + dscp_capture_install $h2 0 + ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17 +} + +h2_destroy() +{ + ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17 + dscp_capture_uninstall $h2 0 + tc qdisc del dev $h2 clsact + simple_if_fini $h2 192.0.2.18/28 +} + +switch_create() +{ + simple_if_init $swp1 192.0.2.2/28 + __simple_if_init $swp2 v$swp1 192.0.2.17/28 + + tc qdisc add dev $swp1 clsact + tc qdisc add dev $swp2 clsact + + dcb app add dev $swp1 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 + dcb app add dev $swp2 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 +} + +switch_destroy() +{ + dcb app del dev $swp2 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 + dcb app del dev $swp1 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 + + tc qdisc del dev $swp2 clsact + tc qdisc del dev $swp1 clsact + + __simple_if_fini $swp2 192.0.2.17/28 + simple_if_fini $swp1 192.0.2.2/28 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + sysctl_set net.ipv4.ip_forward_update_priority 1 + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + sysctl_restore net.ipv4.ip_forward_update_priority + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.18 +} + +dscp_ping_test() +{ + local vrf_name=$1; shift + local sip=$1; shift + local dip=$1; shift + local prio=$1; shift + local reprio=$1; shift + local dev1=$1; shift + local dev2=$1; shift + local i + + local prio2=$($reprio $prio) # ICMP Request egress prio + local prio3=$($reprio $prio2) # ICMP Response egress prio + + local dscp=$((prio << 2)) # ICMP Request ingress DSCP + local dscp2=$((prio2 << 2)) # ICMP Request egress DSCP + local dscp3=$((prio3 << 2)) # ICMP Response egress DSCP + + RET=0 + + eval "local -A dev1_t0s=($(dscp_fetch_stats $dev1 0))" + eval "local -A dev2_t0s=($(dscp_fetch_stats $dev2 0))" + + local ping_timeout=$((PING_TIMEOUT * 5)) + ip vrf exec $vrf_name \ + ${PING} -Q $dscp ${sip:+-I $sip} $dip \ + -c 10 -i 0.5 -w $ping_timeout &> /dev/null + + eval "local -A dev1_t1s=($(dscp_fetch_stats $dev1 0))" + eval "local -A dev2_t1s=($(dscp_fetch_stats $dev2 0))" + + for i in {0..7}; do + local dscpi=$((i << 2)) + local expect2=0 + local expect3=0 + + if ((i == prio2)); then + expect2=10 + fi + if ((i == prio3)); then + expect3=10 + fi + + local delta=$((dev2_t1s[$i] - dev2_t0s[$i])) + ((expect2 == delta)) + check_err $? "DSCP $dscpi@$dev2: Expected to capture $expect2 packets, got $delta." + + delta=$((dev1_t1s[$i] - dev1_t0s[$i])) + ((expect3 == delta)) + check_err $? "DSCP $dscpi@$dev1: Expected to capture $expect3 packets, got $delta." + done + + log_test "DSCP rewrite: $dscp-(prio $prio2)-$dscp2-(prio $prio3)-$dscp3" +} + +__test_update() +{ + local update=$1; shift + local reprio=$1; shift + local prio + + sysctl_restore net.ipv4.ip_forward_update_priority + sysctl_set net.ipv4.ip_forward_update_priority $update + + for prio in {0..7}; do + dscp_ping_test v$h1 192.0.2.1 192.0.2.18 $prio $reprio $h1 $h2 + done +} + +test_update() +{ + echo "Test net.ipv4.ip_forward_update_priority=1" + __test_update 1 reprioritize +} + +test_no_update() +{ + echo "Test net.ipv4.ip_forward_update_priority=0" + __test_update 0 echo +} + +# Test that when DSCP is updated in pedit, the DSCP rewrite is turned off. +test_pedit_norewrite() +{ + echo "Test no DSCP rewrite after DSCP is updated by pedit" + + tc filter add dev $swp1 ingress handle 101 pref 1 prot ip flower \ + action pedit ex munge ip dsfield set $((3 << 2)) retain 0xfc \ + action skbedit priority 3 + + __test_update 0 three + + tc filter del dev $swp1 ingress pref 1 +} + +# Test that when the last APP rule is removed, the prio->DSCP map is properly +# set to zeroes, and that the last APP rule does not stay active in the ASIC. +test_dscp_leftover() +{ + echo "Test that last removed DSCP rule is deconfigured correctly" + + dcb app del dev $swp2 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 + + __test_update 0 zero + + dcb app add dev $swp2 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh new file mode 100755 index 0000000000..fee74f215c --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh @@ -0,0 +1,325 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# A test for strict prioritization of traffic in the switch. Run two streams of +# traffic, each through a different ingress port, one tagged with PCP of 1, the +# other with PCP of 2. Both streams converge at one egress port, where they are +# assigned TC of, respectively, 1 and 2, with strict priority configured between +# them. In H3, we expect to see (almost) exclusively the high-priority traffic. +# +# Please see qos_mc_aware.sh for an explanation of why we use mausezahn and +# counters instead of just running iperf3. +# +# +---------------------------+ +-----------------------------+ +# | H1 | | H2 | +# | $h1.111 + | | + $h2.222 | +# | 192.0.2.33/28 | | | | 192.0.2.65/28 | +# | e-qos-map 0:1 | | | | e-qos-map 0:2 | +# | | | | | | +# | $h1 + | | + $h2 | +# +-----------------|---------+ +---------|-------------------+ +# | | +# +-----------------|-------------------------------------|-------------------+ +# | $swp1 + + $swp2 | +# | >1Gbps | | >1Gbps | +# | +---------------|-----------+ +----------|----------------+ | +# | | $swp1.111 + | | + $swp2.222 | | +# | | BR111 | SW | BR222 | | +# | | $swp3.111 + | | + $swp3.222 | | +# | +---------------|-----------+ +----------|----------------+ | +# | \_____________________________________/ | +# | | | +# | + $swp3 | +# | | 1Gbps bottleneck | +# | | ETS: (up n->tc n for n in 0..7) | +# | | strict priority | +# +------------------------------------|--------------------------------------+ +# | +# +--------------------|--------------------+ +# | + $h3 H3 | +# | / \ | +# | / \ | +# | $h3.111 + + $h3.222 | +# | 192.0.2.34/28 192.0.2.66/28 | +# +-----------------------------------------+ + +ALL_TESTS=" + ping_ipv4 + test_ets_strict +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source qos_lib.sh + +h1_create() +{ + simple_if_init $h1 + mtu_set $h1 10000 + + vlan_create $h1 111 v$h1 192.0.2.33/28 + ip link set dev $h1.111 type vlan egress-qos-map 0:1 +} + +h1_destroy() +{ + vlan_destroy $h1 111 + + mtu_restore $h1 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + mtu_set $h2 10000 + + vlan_create $h2 222 v$h2 192.0.2.65/28 + ip link set dev $h2.222 type vlan egress-qos-map 0:2 +} + +h2_destroy() +{ + vlan_destroy $h2 222 + + mtu_restore $h2 + simple_if_fini $h2 +} + +h3_create() +{ + simple_if_init $h3 + mtu_set $h3 10000 + + vlan_create $h3 111 v$h3 192.0.2.34/28 + vlan_create $h3 222 v$h3 192.0.2.66/28 +} + +h3_destroy() +{ + vlan_destroy $h3 222 + vlan_destroy $h3 111 + + mtu_restore $h3 + simple_if_fini $h3 +} + +switch_create() +{ + ip link set dev $swp1 up + mtu_set $swp1 10000 + + ip link set dev $swp2 up + mtu_set $swp2 10000 + + # prio n -> TC n, strict scheduling + lldptool -T -i $swp3 -V ETS-CFG up2tc=0:0,1:1,2:2,3:3,4:4,5:5,6:6,7:7 + lldptool -T -i $swp3 -V ETS-CFG tsa=$( + )"0:strict,"$( + )"1:strict,"$( + )"2:strict,"$( + )"3:strict,"$( + )"4:strict,"$( + )"5:strict,"$( + )"6:strict,"$( + )"7:strict" + sleep 1 + + ip link set dev $swp3 up + mtu_set $swp3 10000 + tc qdisc replace dev $swp3 root handle 101: tbf rate 1gbit \ + burst 128K limit 1G + + vlan_create $swp1 111 + vlan_create $swp2 222 + vlan_create $swp3 111 + vlan_create $swp3 222 + + ip link add name br111 type bridge vlan_filtering 0 + ip link set dev br111 addrgenmode none + ip link set dev br111 up + ip link set dev $swp1.111 master br111 + ip link set dev $swp3.111 master br111 + + ip link add name br222 type bridge vlan_filtering 0 + ip link set dev br222 addrgenmode none + ip link set dev br222 up + ip link set dev $swp2.222 master br222 + ip link set dev $swp3.222 master br222 + + # Make sure that ingress quotas are smaller than egress so that there is + # room for both streams of traffic to be admitted to shared buffer. + devlink_pool_size_thtype_save 0 + devlink_pool_size_thtype_set 0 dynamic 10000000 + devlink_pool_size_thtype_save 4 + devlink_pool_size_thtype_set 4 dynamic 10000000 + + devlink_port_pool_th_save $swp1 0 + devlink_port_pool_th_set $swp1 0 6 + devlink_tc_bind_pool_th_save $swp1 1 ingress + devlink_tc_bind_pool_th_set $swp1 1 ingress 0 6 + + devlink_port_pool_th_save $swp2 0 + devlink_port_pool_th_set $swp2 0 6 + devlink_tc_bind_pool_th_save $swp2 2 ingress + devlink_tc_bind_pool_th_set $swp2 2 ingress 0 6 + + devlink_tc_bind_pool_th_save $swp3 1 egress + devlink_tc_bind_pool_th_set $swp3 1 egress 4 7 + devlink_tc_bind_pool_th_save $swp3 2 egress + devlink_tc_bind_pool_th_set $swp3 2 egress 4 7 + devlink_port_pool_th_save $swp3 4 + devlink_port_pool_th_set $swp3 4 7 +} + +switch_destroy() +{ + devlink_port_pool_th_restore $swp3 4 + devlink_tc_bind_pool_th_restore $swp3 2 egress + devlink_tc_bind_pool_th_restore $swp3 1 egress + + devlink_tc_bind_pool_th_restore $swp2 2 ingress + devlink_port_pool_th_restore $swp2 0 + + devlink_tc_bind_pool_th_restore $swp1 1 ingress + devlink_port_pool_th_restore $swp1 0 + + devlink_pool_size_thtype_restore 4 + devlink_pool_size_thtype_restore 0 + + ip link del dev br222 + ip link del dev br111 + + vlan_destroy $swp3 222 + vlan_destroy $swp3 111 + vlan_destroy $swp2 222 + vlan_destroy $swp1 111 + + tc qdisc del dev $swp3 root handle 101: + mtu_restore $swp3 + ip link set dev $swp3 down + lldptool -T -i $swp3 -V ETS-CFG up2tc=0:0,1:0,2:0,3:0,4:0,5:0,6:0,7:0 + + mtu_restore $swp2 + ip link set dev $swp2 down + + mtu_restore $swp1 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + h3mac=$(mac_get $h3) + + vrf_prepare + + h1_create + h2_create + h3_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h3_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.34 " from H1" + ping_test $h2 192.0.2.66 " from H2" +} + +rel() +{ + local old=$1; shift + local new=$1; shift + + bc <<< " + scale=2 + ret = 100 * $new / $old + if (ret > 0) { ret } else { 0 } + " +} + +test_ets_strict() +{ + RET=0 + + # Run high-prio traffic on its own. + start_traffic $h2.222 192.0.2.65 192.0.2.66 $h3mac + local -a rate_2 + rate_2=($(measure_rate $swp2 $h3 rx_octets_prio_2 "prio 2")) + check_err $? "Could not get high enough prio-2 ingress rate" + local rate_2_in=${rate_2[0]} + local rate_2_eg=${rate_2[1]} + stop_traffic # $h2.222 + + # Start low-prio stream. + start_traffic $h1.111 192.0.2.33 192.0.2.34 $h3mac + + local -a rate_1 + rate_1=($(measure_rate $swp1 $h3 rx_octets_prio_1 "prio 1")) + check_err $? "Could not get high enough prio-1 ingress rate" + local rate_1_in=${rate_1[0]} + local rate_1_eg=${rate_1[1]} + + # High-prio and low-prio on their own should have about the same + # throughput. + local rel21=$(rel $rate_1_eg $rate_2_eg) + check_err $(bc <<< "$rel21 < 95") + check_err $(bc <<< "$rel21 > 105") + + # Start the high-prio stream--now both streams run. + start_traffic $h2.222 192.0.2.65 192.0.2.66 $h3mac + rate_3=($(measure_rate $swp2 $h3 rx_octets_prio_2 "prio 2 w/ 1")) + check_err $? "Could not get high enough prio-2 ingress rate with prio-1" + local rate_3_in=${rate_3[0]} + local rate_3_eg=${rate_3[1]} + stop_traffic # $h2.222 + + stop_traffic # $h1.111 + + # High-prio should have about the same throughput whether or not + # low-prio is in the system. + local rel32=$(rel $rate_2_eg $rate_3_eg) + check_err $(bc <<< "$rel32 < 95") + + log_test "strict priority" + echo "Ingress to switch:" + echo " p1 in rate $(humanize $rate_1_in)" + echo " p2 in rate $(humanize $rate_2_in)" + echo " p2 in rate w/ p1 $(humanize $rate_3_in)" + echo "Egress from switch:" + echo " p1 eg rate $(humanize $rate_1_eg)" + echo " p2 eg rate $(humanize $rate_2_eg) ($rel21% of p1)" + echo " p2 eg rate w/ p1 $(humanize $rate_3_eg) ($rel32% of p2)" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_headroom.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_headroom.sh new file mode 100755 index 0000000000..88162b4027 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_headroom.sh @@ -0,0 +1,379 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + test_defaults + test_dcb_ets + test_mtu + test_pfc + test_int_buf + test_tc_priomap + test_tc_mtu + test_tc_sizes + test_tc_int_buf +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=0 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +swp=$NETIF_NO_CABLE + +cleanup() +{ + pre_cleanup +} + +get_prio_pg() +{ + # Produces a string of numbers "<B0> <B1> ... <B7> ", where BX is number + # of buffer that priority X is mapped to. + dcb -j buffer show dev $swp | + jq -r '[.prio_buffer | .[] | tostring + " "] | add' +} + +get_prio_pfc() +{ + # Produces a string of numbers "<P0> <P1> ... <P7> ", where PX denotes + # whether priority X has PFC enabled (the value is 1) or disabled (0). + dcb -j pfc show dev $swp | + jq -r '[.prio_pfc | .[] | if . then "1 " else "0 " end] | add' +} + +get_prio_tc() +{ + # Produces a string of numbers "<T0> <T1> ... <T7> ", where TC is number + # of TC that priority X is mapped to. + dcb -j ets show dev $swp | + jq -r '[.prio_tc | .[] | tostring + " "] | add' +} + +get_buf_size() +{ + local idx=$1; shift + + dcb -j buffer show dev $swp | jq ".buffer_size[$idx]" +} + +get_tot_size() +{ + dcb -j buffer show dev $swp | jq '.total_size' +} + +check_prio_pg() +{ + local expect=$1; shift + + local current=$(get_prio_pg) + test "$current" = "$expect" + check_err $? "prio2buffer is '$current', expected '$expect'" +} + +check_prio_pfc() +{ + local expect=$1; shift + + local current=$(get_prio_pfc) + test "$current" = "$expect" + check_err $? "prio PFC is '$current', expected '$expect'" +} + +check_prio_tc() +{ + local expect=$1; shift + + local current=$(get_prio_tc) + test "$current" = "$expect" + check_err $? "prio_tc is '$current', expected '$expect'" +} + +__check_buf_size() +{ + local idx=$1; shift + local expr=$1; shift + local what=$1; shift + + local current=$(get_buf_size $idx) + ((current $expr)) + check_err $? "${what}buffer $idx size is '$current', expected '$expr'" + echo $current +} + +check_buf_size() +{ + __check_buf_size "$@" > /dev/null +} + +test_defaults() +{ + RET=0 + + check_prio_pg "0 0 0 0 0 0 0 0 " + check_prio_tc "0 0 0 0 0 0 0 0 " + check_prio_pfc "0 0 0 0 0 0 0 0 " + + log_test "Default headroom configuration" +} + +test_dcb_ets() +{ + RET=0 + + dcb ets set dev $swp prio-tc 0:0 1:2 2:4 3:6 4:1 5:3 6:5 7:7 + + check_prio_pg "0 2 4 6 1 3 5 7 " + check_prio_tc "0 2 4 6 1 3 5 7 " + check_prio_pfc "0 0 0 0 0 0 0 0 " + + dcb ets set dev $swp prio-tc all:0 + + check_prio_pg "0 0 0 0 0 0 0 0 " + check_prio_tc "0 0 0 0 0 0 0 0 " + + dcb buffer set dev $swp prio-buffer 0:1 1:3 2:5 3:7 4:0 5:2 6:4 7:6 2>/dev/null + check_fail $? "prio2buffer accepted in DCB mode" + + log_test "Configuring headroom through ETS" +} + +test_mtu() +{ + local what=$1; shift + local buf0size_2 + local buf0size + + RET=0 + buf0size=$(__check_buf_size 0 "> 0") + + mtu_set $swp 3000 + buf0size_2=$(__check_buf_size 0 "> $buf0size" "MTU 3000: ") + mtu_restore $swp + + mtu_set $swp 6000 + check_buf_size 0 "> $buf0size_2" "MTU 6000: " + mtu_restore $swp + + check_buf_size 0 "== $buf0size" + + log_test "${what}MTU impacts buffer size" +} + +test_tc_mtu() +{ + # In TC mode, MTU still impacts the threshold below which a buffer is + # not permitted to go. + + tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M + test_mtu "TC: " + tc qdisc delete dev $swp root +} + +test_pfc() +{ + RET=0 + + dcb ets set dev $swp prio-tc all:0 5:1 6:2 7:3 + + local buf0size=$(get_buf_size 0) + local buf1size=$(get_buf_size 1) + local buf2size=$(get_buf_size 2) + local buf3size=$(get_buf_size 3) + check_buf_size 0 "> 0" + check_buf_size 1 "> 0" + check_buf_size 2 "> 0" + check_buf_size 3 "> 0" + check_buf_size 4 "== 0" + check_buf_size 5 "== 0" + check_buf_size 6 "== 0" + check_buf_size 7 "== 0" + + log_test "Buffer size sans PFC" + + RET=0 + + dcb pfc set dev $swp prio-pfc all:off 5:on 6:on 7:on delay 0 + + check_prio_pg "0 0 0 0 0 1 2 3 " + check_prio_pfc "0 0 0 0 0 1 1 1 " + check_buf_size 0 "== $buf0size" + check_buf_size 1 "> $buf1size" + check_buf_size 2 "> $buf2size" + check_buf_size 3 "> $buf3size" + + local buf1size=$(get_buf_size 1) + check_buf_size 2 "== $buf1size" + check_buf_size 3 "== $buf1size" + + log_test "PFC: Cable length 0" + + RET=0 + + dcb pfc set dev $swp delay 1000 + + check_buf_size 0 "== $buf0size" + check_buf_size 1 "> $buf1size" + check_buf_size 2 "> $buf1size" + check_buf_size 3 "> $buf1size" + + log_test "PFC: Cable length 1000" + + RET=0 + + dcb pfc set dev $swp prio-pfc all:off delay 0 + dcb ets set dev $swp prio-tc all:0 + + check_prio_pg "0 0 0 0 0 0 0 0 " + check_prio_tc "0 0 0 0 0 0 0 0 " + check_buf_size 0 "> 0" + check_buf_size 1 "== 0" + check_buf_size 2 "== 0" + check_buf_size 3 "== 0" + check_buf_size 4 "== 0" + check_buf_size 5 "== 0" + check_buf_size 6 "== 0" + check_buf_size 7 "== 0" + + log_test "PFC: Restore defaults" +} + +test_tc_priomap() +{ + RET=0 + + dcb ets set dev $swp prio-tc 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 + check_prio_pg "0 1 2 3 4 5 6 7 " + + tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M + check_prio_pg "0 0 0 0 0 0 0 0 " + + dcb buffer set dev $swp prio-buffer 0:1 1:3 2:5 3:7 4:0 5:2 6:4 7:6 + check_prio_pg "1 3 5 7 0 2 4 6 " + + tc qdisc delete dev $swp root + check_prio_pg "0 1 2 3 4 5 6 7 " + + # Clean up. + tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M + dcb buffer set dev $swp prio-buffer all:0 + tc qdisc delete dev $swp root + dcb ets set dev $swp prio-tc all:0 + + log_test "TC: priomap" +} + +test_tc_sizes() +{ + local cell_size=$(devlink_cell_size_get) + local size=$((cell_size * 1000)) + + RET=0 + + dcb buffer set dev $swp buffer-size all:0 0:$size 2>/dev/null + check_fail $? "buffer_size should fail before qdisc is added" + + tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M + + dcb buffer set dev $swp buffer-size all:0 0:$size + check_err $? "buffer_size should pass after qdisc is added" + check_buf_size 0 "== $size" "set size: " + + mtu_set $swp 6000 + check_buf_size 0 "== $size" "set MTU: " + mtu_restore $swp + + dcb buffer set dev $swp buffer-size all:0 + + # After replacing the qdisc for the same kind, buffer_size still has to + # work. + tc qdisc replace dev $swp root handle 1: bfifo limit 1M + + dcb buffer set dev $swp buffer-size all:0 0:$size + check_buf_size 0 "== $size" "post replace, set size: " + + dcb buffer set dev $swp buffer-size all:0 + + # Likewise after replacing for a different kind. + tc qdisc replace dev $swp root handle 2: prio bands 8 + + dcb buffer set dev $swp buffer-size all:0 0:$size + check_buf_size 0 "== $size" "post replace different kind, set size: " + + tc qdisc delete dev $swp root + + dcb buffer set dev $swp buffer-size all:0 0:$size 2>/dev/null + check_fail $? "buffer_size should fail after qdisc is deleted" + + log_test "TC: buffer size" +} + +test_int_buf() +{ + local what=$1; shift + + RET=0 + + local buf0size=$(get_buf_size 0) + local tot_size=$(get_tot_size) + + # Size of internal buffer and buffer 9. + local dsize=$((tot_size - buf0size)) + + tc qdisc add dev $swp clsact + tc filter add dev $swp egress matchall skip_sw action mirred egress mirror dev $swp + + local buf0size_2=$(get_buf_size 0) + local tot_size_2=$(get_tot_size) + local dsize_2=$((tot_size_2 - buf0size_2)) + + # Egress SPAN should have added to the "invisible" buffer configuration. + ((dsize_2 > dsize)) + check_err $? "Invisible buffers account for '$dsize_2', expected '> $dsize'" + + mtu_set $swp 3000 + + local buf0size_3=$(get_buf_size 0) + local tot_size_3=$(get_tot_size) + local dsize_3=$((tot_size_3 - buf0size_3)) + + # MTU change might change buffer 0, which will show at total, but the + # hidden buffers should stay the same size. + ((dsize_3 == dsize_2)) + check_err $? "MTU change: Invisible buffers account for '$dsize_3', expected '== $dsize_2'" + + mtu_restore $swp + tc qdisc del dev $swp clsact + + # After SPAN removal, hidden buffers should be back to the original sizes. + local buf0size_4=$(get_buf_size 0) + local tot_size_4=$(get_tot_size) + local dsize_4=$((tot_size_4 - buf0size_4)) + ((dsize_4 == dsize)) + check_err $? "SPAN removed: Invisible buffers account for '$dsize_4', expected '== $dsize'" + + log_test "${what}internal buffer size" +} + +test_tc_int_buf() +{ + local cell_size=$(devlink_cell_size_get) + local size=$((cell_size * 1000)) + + tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M + test_int_buf "TC: " + + dcb buffer set dev $swp buffer-size all:0 0:$size + test_int_buf "TC+buffsize: " + + dcb buffer set dev $swp buffer-size all:0 + tc qdisc delete dev $swp root +} + +bail_on_lldpad "configure DCB" "configure Qdiscs" + +trap cleanup EXIT +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_lib.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_lib.sh new file mode 100644 index 0000000000..5ad092b9bf --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_lib.sh @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 + +check_rate() +{ + local rate=$1; shift + local min=$1; shift + local what=$1; shift + + if ((rate > min)); then + return 0 + fi + + echo "$what $(humanize $ir) < $(humanize $min)" > /dev/stderr + return 1 +} + +measure_rate() +{ + local sw_in=$1; shift # Where the traffic ingresses the switch + local host_in=$1; shift # Where it ingresses another host + local counter=$1; shift # Counter to use for measurement + local what=$1; shift + + local interval=10 + local i + local ret=0 + + # Dips in performance might cause momentary ingress rate to drop below + # 1Gbps. That wouldn't saturate egress and MC would thus get through, + # seemingly winning bandwidth on account of UC. Demand at least 2Gbps + # average ingress rate to somewhat mitigate this. + local min_ingress=2147483648 + + for i in {5..0}; do + local t0=$(ethtool_stats_get $host_in $counter) + local u0=$(ethtool_stats_get $sw_in $counter) + sleep $interval + local t1=$(ethtool_stats_get $host_in $counter) + local u1=$(ethtool_stats_get $sw_in $counter) + + local ir=$(rate $u0 $u1 $interval) + local er=$(rate $t0 $t1 $interval) + + if check_rate $ir $min_ingress "$what ingress rate"; then + break + fi + + # Fail the test if we can't get the throughput. + if ((i == 0)); then + ret=1 + fi + done + + echo $ir $er + return $ret +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_max_descriptors.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_max_descriptors.sh new file mode 100755 index 0000000000..5ac4f795e3 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_max_descriptors.sh @@ -0,0 +1,282 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test sends many small packets (size is less than cell size) through the +# switch. A shaper is used in $swp2, so the traffic is limited there. Packets +# are queued till they will be sent. +# +# The idea is to verify that the switch can handle at least 85% of maximum +# supported descrpitors by hardware. Then, we verify that the driver configures +# firmware to allow infinite size of egress descriptor pool, and does not use a +# lower limitation. Increase the size of the relevant pools such that the pool's +# size does not limit the traffic. + +# +-----------------------+ +# | H1 | +# | + $h1.111 | +# | | 192.0.2.33/28 | +# | | | +# | + $h1 | +# +---|-------------------+ +# | +# +---|-----------------------------+ +# | + $swp1 | +# | | iPOOL1 | +# | | | +# | +-|------------------------+ | +# | | + $swp1.111 | | +# | | | | +# | | BR1 | | +# | | | | +# | | + $swp2.111 | | +# | +-|------------------------+ | +# | | | +# | + $swp2 | +# | | ePOOL6 | +# | | 1mbit | +# +---+-----------------------------+ +# | +# +---|-------------------+ +# | + $h2 H2 | +# | | | +# | + $h2.111 | +# | 192.0.2.34/28 | +# +-----------------------+ +# + +ALL_TESTS=" + ping_ipv4 + max_descriptors +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source mlxsw_lib.sh + +MAX_POOL_SIZE=$(devlink_pool_size_get) +SHAPER_RATE=1mbit + +# The current TBF qdisc interface does not allow us to configure the shaper to +# flat zero. The ASIC shaper is guaranteed to work with a granularity of +# 200Mbps. On Spectrum-2, writing a value close to zero instead of zero works +# well, but the performance on Spectrum-1 is unpredictable. Thus, do not run the +# test on Spectrum-1. +mlxsw_only_on_spectrum 2+ || exit + +h1_create() +{ + simple_if_init $h1 + + vlan_create $h1 111 v$h1 192.0.2.33/28 + ip link set dev $h1.111 type vlan egress-qos-map 0:1 +} + +h1_destroy() +{ + vlan_destroy $h1 111 + + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + + vlan_create $h2 111 v$h2 192.0.2.34/28 +} + +h2_destroy() +{ + vlan_destroy $h2 111 + + simple_if_fini $h2 +} + +switch_create() +{ + # pools + # ----- + + devlink_pool_size_thtype_save 1 + devlink_pool_size_thtype_save 6 + + devlink_port_pool_th_save $swp1 1 + devlink_port_pool_th_save $swp2 6 + + devlink_tc_bind_pool_th_save $swp1 1 ingress + devlink_tc_bind_pool_th_save $swp2 1 egress + + devlink_pool_size_thtype_set 1 dynamic $MAX_POOL_SIZE + devlink_pool_size_thtype_set 6 static $MAX_POOL_SIZE + + # $swp1 + # ----- + + ip link set dev $swp1 up + vlan_create $swp1 111 + ip link set dev $swp1.111 type vlan ingress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp1 1 16 + devlink_tc_bind_pool_th_set $swp1 1 ingress 1 16 + + tc qdisc replace dev $swp1 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + dcb buffer set dev $swp1 prio-buffer all:0 1:1 + + # $swp2 + # ----- + + ip link set dev $swp2 up + vlan_create $swp2 111 + ip link set dev $swp2.111 type vlan egress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp2 6 $MAX_POOL_SIZE + devlink_tc_bind_pool_th_set $swp2 1 egress 6 $MAX_POOL_SIZE + + tc qdisc replace dev $swp2 root handle 1: tbf rate $SHAPER_RATE \ + burst 128K limit 500M + tc qdisc replace dev $swp2 parent 1:1 handle 11: \ + ets bands 8 strict 8 priomap 7 6 + + # bridge + # ------ + + ip link add name br1 type bridge vlan_filtering 0 + ip link set dev $swp1.111 master br1 + ip link set dev br1 up + + ip link set dev $swp2.111 master br1 +} + +switch_destroy() +{ + # Do this first so that we can reset the limits to values that are only + # valid for the original static / dynamic setting. + devlink_pool_size_thtype_restore 6 + devlink_pool_size_thtype_restore 1 + + # bridge + # ------ + + ip link set dev $swp2.111 nomaster + + ip link set dev br1 down + ip link set dev $swp1.111 nomaster + ip link del dev br1 + + # $swp2 + # ----- + + tc qdisc del dev $swp2 parent 1:1 handle 11: + tc qdisc del dev $swp2 root + + devlink_tc_bind_pool_th_restore $swp2 1 egress + devlink_port_pool_th_restore $swp2 6 + + vlan_destroy $swp2 111 + ip link set dev $swp2 down + + # $swp1 + # ----- + + dcb buffer set dev $swp1 prio-buffer all:0 + tc qdisc del dev $swp1 root + + devlink_tc_bind_pool_th_restore $swp1 1 ingress + devlink_port_pool_th_restore $swp1 1 + + vlan_destroy $swp1 111 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + h2mac=$(mac_get $h2) + + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.34 " h1->h2" +} + +percentage_used() +{ + local num_packets=$1; shift + local max_packets=$1; shift + + bc <<< " + scale=2 + 100 * $num_packets / $max_packets + " +} + +max_descriptors() +{ + local cell_size=$(devlink_cell_size_get) + local exp_perc_used=85 + local max_descriptors + local pktsize=30 + + RET=0 + + max_descriptors=$(mlxsw_max_descriptors_get) || exit 1 + + local d0=$(ethtool_stats_get $swp2 tc_no_buffer_discard_uc_tc_1) + + log_info "Send many small packets, packet size = $pktsize bytes" + start_traffic_pktsize $pktsize $h1.111 192.0.2.33 192.0.2.34 $h2mac + + # Sleep to wait for congestion. + sleep 5 + + local d1=$(ethtool_stats_get $swp2 tc_no_buffer_discard_uc_tc_1) + ((d1 == d0)) + check_err $? "Drops seen on egress port: $d0 -> $d1 ($((d1 - d0)))" + + # Check how many packets the switch can handle, the limitation is + # maximum descriptors. + local pkts_bytes=$(ethtool_stats_get $swp2 tc_transmit_queue_tc_1) + local pkts_num=$((pkts_bytes / cell_size)) + local perc_used=$(percentage_used $pkts_num $max_descriptors) + + check_err $(bc <<< "$perc_used < $exp_perc_used") \ + "Expected > $exp_perc_used% of descriptors, handle $perc_used%" + + stop_traffic + sleep 1 + + log_test "Maximum descriptors usage. The percentage used is $perc_used%" +} + +trap cleanup EXIT +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh new file mode 100755 index 0000000000..6d892de43f --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh @@ -0,0 +1,344 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# A test for switch behavior under MC overload. An issue in Spectrum chips +# causes throughput of UC traffic to drop severely when a switch is under heavy +# MC load. This issue can be overcome by putting the switch to MC-aware mode. +# This test verifies that UC performance stays intact even as the switch is +# under MC flood, and therefore that the MC-aware mode is enabled and correctly +# configured. +# +# Because mlxsw throttles CPU port, the traffic can't actually reach userspace +# at full speed. That makes it impossible to use iperf3 to simply measure the +# throughput, because many packets (that reach $h3) don't get to the kernel at +# all even in UDP mode (the situation is even worse in TCP mode, where one can't +# hope to see more than a couple Mbps). +# +# So instead we send traffic with mausezahn and use RX ethtool counters at $h3. +# Multicast traffic is untagged, unicast traffic is tagged with PCP 1. Therefore +# each gets a different priority and we can use per-prio ethtool counters to +# measure the throughput. In order to avoid prioritizing unicast traffic, prio +# qdisc is installed on $swp3 and maps all priorities to the same band #7 (and +# thus TC 0). +# +# Mausezahn can't actually saturate the links unless it's using large frames. +# Thus we set MTU to 10K on all involved interfaces. Then both unicast and +# multicast traffic uses 8K frames. +# +# +---------------------------+ +----------------------------------+ +# | H1 | | H2 | +# | | | unicast --> + $h2.111 | +# | multicast | | traffic | 192.0.2.129/28 | +# | traffic | | | e-qos-map 0:1 | +# | $h1 + <----- | | | | +# | 192.0.2.65/28 | | | + $h2 | +# +---------------|-----------+ +--------------|-------------------+ +# | | +# +---------------|---------------------------------------|-------------------+ +# | $swp1 + + $swp2 | +# | >1Gbps | | >1Gbps | +# | +-------------|------+ +----------|----------------+ | +# | | $swp1.1 + | | + $swp2.111 | | +# | | BR1 | SW | BR111 | | +# | | $swp3.1 + | | + $swp3.111 | | +# | +-------------|------+ +----------|----------------+ | +# | \_______________________________________/ | +# | | | +# | + $swp3 | +# | | 1Gbps bottleneck | +# | | prio qdisc: {0..7} -> 7 | +# +------------------------------------|--------------------------------------+ +# | +# +--|-----------------+ +# | + $h3 H3 | +# | | 192.0.2.66/28 | +# | | | +# | + $h3.111 | +# | 192.0.2.130/28 | +# +--------------------+ + +ALL_TESTS=" + ping_ipv4 + test_mc_aware + test_uc_aware +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source qos_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.65/28 + mtu_set $h1 10000 +} + +h1_destroy() +{ + mtu_restore $h1 + simple_if_fini $h1 192.0.2.65/28 +} + +h2_create() +{ + simple_if_init $h2 + mtu_set $h2 10000 + + vlan_create $h2 111 v$h2 192.0.2.129/28 + ip link set dev $h2.111 type vlan egress-qos-map 0:1 +} + +h2_destroy() +{ + vlan_destroy $h2 111 + + mtu_restore $h2 + simple_if_fini $h2 +} + +h3_create() +{ + simple_if_init $h3 192.0.2.66/28 + mtu_set $h3 10000 + + vlan_create $h3 111 v$h3 192.0.2.130/28 +} + +h3_destroy() +{ + vlan_destroy $h3 111 + + mtu_restore $h3 + simple_if_fini $h3 192.0.2.66/28 +} + +switch_create() +{ + ip link set dev $swp1 up + mtu_set $swp1 10000 + + ip link set dev $swp2 up + mtu_set $swp2 10000 + + ip link set dev $swp3 up + mtu_set $swp3 10000 + + vlan_create $swp2 111 + vlan_create $swp3 111 + + tc qdisc replace dev $swp3 root handle 3: tbf rate 1gbit \ + burst 128K limit 1G + tc qdisc replace dev $swp3 parent 3:3 handle 33: \ + prio bands 8 priomap 7 7 7 7 7 7 7 7 + + ip link add name br1 type bridge vlan_filtering 0 + ip link set dev br1 addrgenmode none + ip link set dev br1 up + ip link set dev $swp1 master br1 + ip link set dev $swp3 master br1 + + ip link add name br111 type bridge vlan_filtering 0 + ip link set dev br111 addrgenmode none + ip link set dev br111 up + ip link set dev $swp2.111 master br111 + ip link set dev $swp3.111 master br111 + + # Make sure that ingress quotas are smaller than egress so that there is + # room for both streams of traffic to be admitted to shared buffer. + devlink_port_pool_th_save $swp1 0 + devlink_port_pool_th_set $swp1 0 5 + devlink_tc_bind_pool_th_save $swp1 0 ingress + devlink_tc_bind_pool_th_set $swp1 0 ingress 0 5 + + devlink_port_pool_th_save $swp2 0 + devlink_port_pool_th_set $swp2 0 5 + devlink_tc_bind_pool_th_save $swp2 1 ingress + devlink_tc_bind_pool_th_set $swp2 1 ingress 0 5 + + devlink_port_pool_th_save $swp3 4 + devlink_port_pool_th_set $swp3 4 12 +} + +switch_destroy() +{ + devlink_port_pool_th_restore $swp3 4 + + devlink_tc_bind_pool_th_restore $swp2 1 ingress + devlink_port_pool_th_restore $swp2 0 + + devlink_tc_bind_pool_th_restore $swp1 0 ingress + devlink_port_pool_th_restore $swp1 0 + + ip link del dev br111 + ip link del dev br1 + + tc qdisc del dev $swp3 parent 3:3 handle 33: + tc qdisc del dev $swp3 root handle 3: + + vlan_destroy $swp3 111 + vlan_destroy $swp2 111 + + mtu_restore $swp3 + ip link set dev $swp3 down + + mtu_restore $swp2 + ip link set dev $swp2 down + + mtu_restore $swp1 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + h3mac=$(mac_get $h3) + + vrf_prepare + + h1_create + h2_create + h3_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h3_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h2 192.0.2.130 +} + +test_mc_aware() +{ + RET=0 + + local -a uc_rate + start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac + uc_rate=($(measure_rate $swp2 $h3 rx_octets_prio_1 "UC-only")) + check_err $? "Could not get high enough UC-only ingress rate" + stop_traffic + local ucth1=${uc_rate[1]} + + start_traffic $h1 192.0.2.65 bc bc + + local d0=$(date +%s) + local t0=$(ethtool_stats_get $h3 rx_octets_prio_0) + local u0=$(ethtool_stats_get $swp1 rx_octets_prio_0) + + local -a uc_rate_2 + start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac + uc_rate_2=($(measure_rate $swp2 $h3 rx_octets_prio_1 "UC+MC")) + check_err $? "Could not get high enough UC+MC ingress rate" + stop_traffic + local ucth2=${uc_rate_2[1]} + + local d1=$(date +%s) + local t1=$(ethtool_stats_get $h3 rx_octets_prio_0) + local u1=$(ethtool_stats_get $swp1 rx_octets_prio_0) + + local deg=$(bc <<< " + scale=2 + ret = 100 * ($ucth1 - $ucth2) / $ucth1 + if (ret > 0) { ret } else { 0 } + ") + + # Minimum shaper of 200Mbps on MC TCs should cause about 20% of + # degradation on 1Gbps link. + check_err $(bc <<< "$deg < 15") "Minimum shaper not in effect" + check_err $(bc <<< "$deg > 25") "MC traffic degrades UC performance too much" + + local interval=$((d1 - d0)) + local mc_ir=$(rate $u0 $u1 $interval) + local mc_er=$(rate $t0 $t1 $interval) + + stop_traffic + + log_test "UC performance under MC overload" + + echo "UC-only throughput $(humanize $ucth1)" + echo "UC+MC throughput $(humanize $ucth2)" + echo "Degradation $deg %" + echo + echo "Full report:" + echo " UC only:" + echo " ingress UC throughput $(humanize ${uc_rate[0]})" + echo " egress UC throughput $(humanize ${uc_rate[1]})" + echo " UC+MC:" + echo " ingress UC throughput $(humanize ${uc_rate_2[0]})" + echo " egress UC throughput $(humanize ${uc_rate_2[1]})" + echo " ingress MC throughput $(humanize $mc_ir)" + echo " egress MC throughput $(humanize $mc_er)" + echo +} + +test_uc_aware() +{ + RET=0 + + start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac + + local d0=$(date +%s) + local t0=$(ethtool_stats_get $h3 rx_octets_prio_1) + local u0=$(ethtool_stats_get $swp2 rx_octets_prio_1) + sleep 1 + + local attempts=50 + local passes=0 + local i + + for ((i = 0; i < attempts; ++i)); do + if $ARPING -c 1 -I $h1 -b 192.0.2.66 -q -w 1; then + ((passes++)) + fi + + sleep 0.1 + done + + local d1=$(date +%s) + local t1=$(ethtool_stats_get $h3 rx_octets_prio_1) + local u1=$(ethtool_stats_get $swp2 rx_octets_prio_1) + + local interval=$((d1 - d0)) + local uc_ir=$(rate $u0 $u1 $interval) + local uc_er=$(rate $t0 $t1 $interval) + + ((attempts == passes)) + check_err $? + + stop_traffic + + log_test "MC performance under UC overload" + echo " ingress UC throughput $(humanize ${uc_ir})" + echo " egress UC throughput $(humanize ${uc_er})" + echo " sent $attempts BC ARPs, got $passes responses" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh new file mode 100755 index 0000000000..e71d811656 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh @@ -0,0 +1,418 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test injects a 10-MB burst of traffic with VLAN tag and 802.1p priority +# of 1. This stream is consistently prioritized as priority 1, is put to PG +# buffer 1, and scheduled at TC 1. +# +# - the stream first ingresses through $swp1, where it is forwarded to $swp3 +# +# - then it ingresses through $swp4. Here it is put to a lossless buffer and put +# to a small pool ("PFC pool"). The traffic is forwarded to $swp2, which is +# shaped, and thus the PFC pool eventually fills, therefore the headroom +# fills, and $swp3 is paused. +# +# - since $swp3 now can't send traffic, the traffic ingressing $swp1 is kept at +# a pool ("overflow pool"). The overflow pool needs to be large enough to +# contain the whole burst. +# +# - eventually the PFC pool gets some traffic out, headroom therefore gets some +# traffic to the pool, and $swp3 is unpaused again. This way the traffic is +# gradually forwarded from the overflow pool, through the PFC pool, out of +# $swp2, and eventually to $h2. +# +# - if PFC works, all lossless flow packets that ingress through $swp1 should +# also be seen ingressing $h2. If it doesn't, there will be drops due to +# discrepancy between the speeds of $swp1 and $h2. +# +# - it should all play out relatively quickly, so that SLL and HLL will not +# cause drops. +# +# +-----------------------+ +# | H1 | +# | + $h1.111 | +# | | 192.0.2.33/28 | +# | | | +# | + $h1 | +# +---|-------------------+ +--------------------+ +# | | | +# +---|----------------------|--------------------|---------------------------+ +# | + $swp1 $swp3 + + $swp4 | +# | | iPOOL1 iPOOL0 | | iPOOL2 | +# | | ePOOL4 ePOOL5 | | ePOOL4 | +# | | 1Gbps | | 1Gbps | +# | | PFC:enabled=1 | | PFC:enabled=1 | +# | +-|----------------------|-+ +-|------------------------+ | +# | | + $swp1.111 $swp3.111 + | | + $swp4.111 | | +# | | | | | | +# | | BR1 | | BR2 | | +# | | | | | | +# | | | | + $swp2.111 | | +# | +--------------------------+ +---------|----------------+ | +# | | | +# | iPOOL0: 500KB dynamic | | +# | iPOOL1: 10MB static | | +# | iPOOL2: 1MB static + $swp2 | +# | ePOOL4: 500KB dynamic | iPOOL0 | +# | ePOOL5: 10MB static | ePOOL6 | +# | ePOOL6: "infinite" static | 200Mbps shaper | +# +-------------------------------------------------------|-------------------+ +# | +# +---|-------------------+ +# | + $h2 H2 | +# | | | +# | + $h2.111 | +# | 192.0.2.34/28 | +# +-----------------------+ +# +# iPOOL0+ePOOL4 is a helper pool for control traffic etc. +# iPOOL1+ePOOL5 are overflow pools. +# iPOOL2+ePOOL6 are PFC pools. + +ALL_TESTS=" + ping_ipv4 + test_qos_pfc +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +_1KB=1000 +_100KB=$((100 * _1KB)) +_500KB=$((500 * _1KB)) +_1MB=$((1000 * _1KB)) +_10MB=$((10 * _1MB)) + +h1_create() +{ + simple_if_init $h1 + mtu_set $h1 10000 + + vlan_create $h1 111 v$h1 192.0.2.33/28 +} + +h1_destroy() +{ + vlan_destroy $h1 111 + + mtu_restore $h1 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + mtu_set $h2 10000 + + vlan_create $h2 111 v$h2 192.0.2.34/28 +} + +h2_destroy() +{ + vlan_destroy $h2 111 + + mtu_restore $h2 + simple_if_fini $h2 +} + +switch_create() +{ + local lanes_swp4 + local pg1_size + + # pools + # ----- + + devlink_pool_size_thtype_save 0 + devlink_pool_size_thtype_save 4 + devlink_pool_size_thtype_save 1 + devlink_pool_size_thtype_save 5 + devlink_pool_size_thtype_save 2 + devlink_pool_size_thtype_save 6 + + devlink_port_pool_th_save $swp1 1 + devlink_port_pool_th_save $swp2 6 + devlink_port_pool_th_save $swp3 5 + devlink_port_pool_th_save $swp4 2 + + devlink_tc_bind_pool_th_save $swp1 1 ingress + devlink_tc_bind_pool_th_save $swp2 1 egress + devlink_tc_bind_pool_th_save $swp3 1 egress + devlink_tc_bind_pool_th_save $swp4 1 ingress + + # Control traffic pools. Just reduce the size. Keep them dynamic so that + # we don't need to change all the uninteresting quotas. + devlink_pool_size_thtype_set 0 dynamic $_500KB + devlink_pool_size_thtype_set 4 dynamic $_500KB + + # Overflow pools. + devlink_pool_size_thtype_set 1 static $_10MB + devlink_pool_size_thtype_set 5 static $_10MB + + # PFC pools. As per the writ, the size of egress PFC pool should be + # infinice, but actually it just needs to be large enough to not matter + # in practice, so reuse the 10MB limit. + devlink_pool_size_thtype_set 2 static $_1MB + devlink_pool_size_thtype_set 6 static $_10MB + + # $swp1 + # ----- + + ip link set dev $swp1 up + mtu_set $swp1 10000 + vlan_create $swp1 111 + ip link set dev $swp1.111 type vlan ingress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp1 1 $_10MB + devlink_tc_bind_pool_th_set $swp1 1 ingress 1 $_10MB + + # Configure qdisc so that we can configure PG and therefore pool + # assignment. + tc qdisc replace dev $swp1 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + dcb buffer set dev $swp1 prio-buffer all:0 1:1 + + # $swp2 + # ----- + + ip link set dev $swp2 up + mtu_set $swp2 10000 + vlan_create $swp2 111 + ip link set dev $swp2.111 type vlan egress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp2 6 $_10MB + devlink_tc_bind_pool_th_set $swp2 1 egress 6 $_10MB + + # prio 0->TC0 (band 7), 1->TC1 (band 6). TC1 is shaped. + tc qdisc replace dev $swp2 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + tc qdisc replace dev $swp2 parent 1:7 handle 17: \ + tbf rate 200Mbit burst 131072 limit 1M + + # $swp3 + # ----- + + ip link set dev $swp3 up + mtu_set $swp3 10000 + vlan_create $swp3 111 + ip link set dev $swp3.111 type vlan egress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp3 5 $_10MB + devlink_tc_bind_pool_th_set $swp3 1 egress 5 $_10MB + + # prio 0->TC0 (band 7), 1->TC1 (band 6) + tc qdisc replace dev $swp3 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + + # Need to enable PFC so that PAUSE takes effect. Therefore need to put + # the lossless prio into a buffer of its own. Don't bother with buffer + # sizes though, there is not going to be any pressure in the "backward" + # direction. + dcb buffer set dev $swp3 prio-buffer all:0 1:1 + dcb pfc set dev $swp3 prio-pfc all:off 1:on + + # $swp4 + # ----- + + ip link set dev $swp4 up + mtu_set $swp4 10000 + vlan_create $swp4 111 + ip link set dev $swp4.111 type vlan ingress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp4 2 $_1MB + devlink_tc_bind_pool_th_set $swp4 1 ingress 2 $_1MB + + # Configure qdisc so that we can hand-tune headroom. + tc qdisc replace dev $swp4 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + dcb buffer set dev $swp4 prio-buffer all:0 1:1 + dcb pfc set dev $swp4 prio-pfc all:off 1:on + # PG0 will get autoconfigured to Xoff, give PG1 arbitrarily 100K, which + # is (-2*MTU) about 80K of delay provision. + pg1_size=$_100KB + + setup_wait_dev_with_timeout $swp4 + + lanes_swp4=$(ethtool $swp4 | grep 'Lanes:') + lanes_swp4=${lanes_swp4#*"Lanes: "} + + # 8-lane ports use two buffers among which the configured buffer + # is split, so double the size to get twice (20K + 80K). + if [[ $lanes_swp4 -eq 8 ]]; then + pg1_size=$((pg1_size * 2)) + fi + + dcb buffer set dev $swp4 buffer-size all:0 1:$pg1_size + + # bridges + # ------- + + ip link add name br1 type bridge vlan_filtering 0 + ip link set dev $swp1.111 master br1 + ip link set dev $swp3.111 master br1 + ip link set dev br1 up + + ip link add name br2 type bridge vlan_filtering 0 + ip link set dev $swp2.111 master br2 + ip link set dev $swp4.111 master br2 + ip link set dev br2 up +} + +switch_destroy() +{ + # Do this first so that we can reset the limits to values that are only + # valid for the original static / dynamic setting. + devlink_pool_size_thtype_restore 6 + devlink_pool_size_thtype_restore 5 + devlink_pool_size_thtype_restore 4 + devlink_pool_size_thtype_restore 2 + devlink_pool_size_thtype_restore 1 + devlink_pool_size_thtype_restore 0 + + # bridges + # ------- + + ip link set dev br2 down + ip link set dev $swp4.111 nomaster + ip link set dev $swp2.111 nomaster + ip link del dev br2 + + ip link set dev br1 down + ip link set dev $swp3.111 nomaster + ip link set dev $swp1.111 nomaster + ip link del dev br1 + + # $swp4 + # ----- + + dcb buffer set dev $swp4 buffer-size all:0 + dcb pfc set dev $swp4 prio-pfc all:off + dcb buffer set dev $swp4 prio-buffer all:0 + tc qdisc del dev $swp4 root + + devlink_tc_bind_pool_th_restore $swp4 1 ingress + devlink_port_pool_th_restore $swp4 2 + + vlan_destroy $swp4 111 + mtu_restore $swp4 + ip link set dev $swp4 down + + # $swp3 + # ----- + + dcb pfc set dev $swp3 prio-pfc all:off + dcb buffer set dev $swp3 prio-buffer all:0 + tc qdisc del dev $swp3 root + + devlink_tc_bind_pool_th_restore $swp3 1 egress + devlink_port_pool_th_restore $swp3 5 + + vlan_destroy $swp3 111 + mtu_restore $swp3 + ip link set dev $swp3 down + + # $swp2 + # ----- + + tc qdisc del dev $swp2 parent 1:7 + tc qdisc del dev $swp2 root + + devlink_tc_bind_pool_th_restore $swp2 1 egress + devlink_port_pool_th_restore $swp2 6 + + vlan_destroy $swp2 111 + mtu_restore $swp2 + ip link set dev $swp2 down + + # $swp1 + # ----- + + dcb buffer set dev $swp1 prio-buffer all:0 + tc qdisc del dev $swp1 root + + devlink_tc_bind_pool_th_restore $swp1 1 ingress + devlink_port_pool_th_restore $swp1 1 + + vlan_destroy $swp1 111 + mtu_restore $swp1 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + swp4=${NETIFS[p6]} + + h2mac=$(mac_get $h2) + + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.34 +} + +test_qos_pfc() +{ + RET=0 + + # 10M pool, each packet is 8K of payload + headers + local pkts=$((_10MB / 8050)) + local size=$((pkts * 8050)) + local in0=$(ethtool_stats_get $swp1 rx_octets_prio_1) + local out0=$(ethtool_stats_get $swp2 tx_octets_prio_1) + + $MZ $h1 -p 8000 -Q 1:111 -A 192.0.2.33 -B 192.0.2.34 \ + -a own -b $h2mac -c $pkts -t udp -q + sleep 2 + + local in1=$(ethtool_stats_get $swp1 rx_octets_prio_1) + local out1=$(ethtool_stats_get $swp2 tx_octets_prio_1) + + local din=$((in1 - in0)) + local dout=$((out1 - out0)) + + local pct_in=$((din * 100 / size)) + + ((pct_in > 95 && pct_in < 105)) + check_err $? "Relative ingress out of expected bounds, $pct_in% should be 100%" + + ((dout == din)) + check_err $? "$((din - dout)) bytes out of $din ingressed got lost" + + log_test "PFC" +} + +bail_on_lldpad "configure DCB" "configure Qdiscs" + +trap cleanup EXIT +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_bridge.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_bridge.sh new file mode 100755 index 0000000000..b79542a4dc --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/rif_bridge.sh @@ -0,0 +1,183 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + bridge_rif_add + bridge_rif_nomaster + bridge_rif_remaster + bridge_rif_nomaster_addr + bridge_rif_nomaster_port + bridge_rif_remaster_port +" + +NUM_NETIFS=2 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + team_create lag1 lacp + ip link set dev lag1 addrgenmode none + ip link set dev lag1 address $(mac_get $swp1) + + team_create lag2 lacp + ip link set dev lag2 addrgenmode none + ip link set dev lag2 address $(mac_get $swp2) + + ip link add name br1 type bridge vlan_filtering 1 + ip link set dev br1 addrgenmode none + ip link set dev br1 address $(mac_get lag1) + ip link set dev br1 up + + ip link set dev lag1 master br1 + + ip link set dev $swp1 master lag1 + ip link set dev $swp1 up + + ip link set dev $swp2 master lag2 + ip link set dev $swp2 up +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 nomaster + ip link set dev $swp2 down + + ip link set dev $swp1 nomaster + ip link set dev $swp1 down + + ip link del dev lag2 + ip link set dev lag1 nomaster + ip link del dev lag1 + + ip link del dev br1 +} + +bridge_rif_add() +{ + RET=0 + + local rifs_occ_t0=$(devlink_resource_occ_get rifs) + __addr_add_del br1 add 192.0.2.2/28 + sleep 1 + local rifs_occ_t1=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0 + 1)) + + ((expected_rifs == rifs_occ_t1)) + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + log_test "Add RIF for bridge on address addition" +} + +bridge_rif_nomaster() +{ + RET=0 + + local rifs_occ_t0=$(devlink_resource_occ_get rifs) + ip link set dev lag1 nomaster + sleep 1 + local rifs_occ_t1=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0 - 1)) + + ((expected_rifs == rifs_occ_t1)) + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + log_test "Drop RIF for bridge on LAG deslavement" +} + +bridge_rif_remaster() +{ + RET=0 + + local rifs_occ_t0=$(devlink_resource_occ_get rifs) + ip link set dev lag1 master br1 + sleep 1 + local rifs_occ_t1=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0 + 1)) + + ((expected_rifs == rifs_occ_t1)) + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + log_test "Add RIF for bridge on LAG reenslavement" +} + +bridge_rif_nomaster_addr() +{ + local rifs_occ_t0=$(devlink_resource_occ_get rifs) + + # Adding an address while the LAG is enslaved shouldn't generate a RIF. + __addr_add_del lag1 add 192.0.2.65/28 + sleep 1 + local rifs_occ_t1=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0)) + + ((expected_rifs == rifs_occ_t1)) + check_err $? "After adding IP: Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + # Removing the LAG from the bridge should drop RIF for the bridge (as + # tested in bridge_rif_lag_nomaster), but since the LAG now has an + # address, it should gain a RIF. + ip link set dev lag1 nomaster + sleep 1 + local rifs_occ_t2=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0)) + + ((expected_rifs == rifs_occ_t2)) + check_err $? "After deslaving: Expected $expected_rifs RIFs, $rifs_occ_t2 are used" + + log_test "Add RIF for LAG on deslavement from bridge" + + __addr_add_del lag1 del 192.0.2.65/28 + ip link set dev lag1 master br1 + sleep 1 +} + +bridge_rif_nomaster_port() +{ + RET=0 + + local rifs_occ_t0=$(devlink_resource_occ_get rifs) + ip link set dev $swp1 nomaster + sleep 1 + local rifs_occ_t1=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0 - 1)) + + ((expected_rifs == rifs_occ_t1)) + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + log_test "Drop RIF for bridge on deslavement of port from LAG" +} + +bridge_rif_remaster_port() +{ + RET=0 + + local rifs_occ_t0=$(devlink_resource_occ_get rifs) + ip link set dev $swp1 down + ip link set dev $swp1 master lag1 + ip link set dev $swp1 up + setup_wait_dev $swp1 + local rifs_occ_t1=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0 + 1)) + + ((expected_rifs == rifs_occ_t1)) + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + log_test "Add RIF for bridge on reenslavement of port to LAG" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_counter_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_counter_scale.sh new file mode 100644 index 0000000000..a43a9926e6 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/rif_counter_scale.sh @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: GPL-2.0 + +RIF_COUNTER_NUM_NETIFS=2 + +rif_counter_addr4() +{ + local i=$1; shift + local p=$1; shift + + printf 192.0.%d.%d $((i / 64)) $(((4 * i % 256) + p)) +} + +rif_counter_addr4pfx() +{ + rif_counter_addr4 $@ + printf /30 +} + +rif_counter_h1_create() +{ + simple_if_init $h1 +} + +rif_counter_h1_destroy() +{ + simple_if_fini $h1 +} + +rif_counter_h2_create() +{ + simple_if_init $h2 +} + +rif_counter_h2_destroy() +{ + simple_if_fini $h2 +} + +rif_counter_setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + vrf_prepare + + rif_counter_h1_create + rif_counter_h2_create +} + +rif_counter_cleanup() +{ + local count=$1; shift + + pre_cleanup + + for ((i = 1; i <= count; i++)); do + vlan_destroy $h2 $i + done + + rif_counter_h2_destroy + rif_counter_h1_destroy + + vrf_cleanup + + if [[ -v RIF_COUNTER_BATCH_FILE ]]; then + rm -f $RIF_COUNTER_BATCH_FILE + fi +} + + +rif_counter_test() +{ + local count=$1; shift + local should_fail=$1; shift + + RIF_COUNTER_BATCH_FILE="$(mktemp)" + + for ((i = 1; i <= count; i++)); do + vlan_create $h2 $i v$h2 $(rif_counter_addr4pfx $i 2) + done + for ((i = 1; i <= count; i++)); do + cat >> $RIF_COUNTER_BATCH_FILE <<-EOF + stats set dev $h2.$i l3_stats on + EOF + done + + ip -b $RIF_COUNTER_BATCH_FILE + check_err_fail $should_fail $? "RIF counter enablement" +} + +rif_counter_traffic_test() +{ + local count=$1; shift + local i; + + for ((i = count; i > 0; i /= 2)); do + $MZ $h1 -Q $i -c 1 -d 20msec -p 100 -a own -b $(mac_get $h2) \ + -A $(rif_counter_addr4 $i 1) \ + -B $(rif_counter_addr4 $i 2) \ + -q -t udp sp=54321,dp=12345 + done + for ((i = count; i > 0; i /= 2)); do + busywait "$TC_HIT_TIMEOUT" until_counter_is "== 1" \ + hw_stats_get l3_stats $h2.$i rx packets > /dev/null + check_err $? "Traffic not seen at RIF $h2.$i" + done +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_lag.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_lag.sh new file mode 100755 index 0000000000..e28f978104 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/rif_lag.sh @@ -0,0 +1,136 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + lag_rif_add + lag_rif_nomaster + lag_rif_remaster + lag_rif_nomaster_addr +" + +NUM_NETIFS=2 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + team_create lag1 lacp + ip link set dev lag1 addrgenmode none + ip link set dev lag1 address $(mac_get $swp1) + + team_create lag2 lacp + ip link set dev lag2 addrgenmode none + ip link set dev lag2 address $(mac_get $swp2) + + ip link set dev $swp1 master lag1 + ip link set dev $swp1 up + + ip link set dev $swp2 master lag2 + ip link set dev $swp2 up +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 nomaster + ip link set dev $swp2 down + + ip link set dev $swp1 nomaster + ip link set dev $swp1 down + + ip link del dev lag2 + ip link del dev lag1 +} + +lag_rif_add() +{ + RET=0 + + local rifs_occ_t0=$(devlink_resource_occ_get rifs) + __addr_add_del lag1 add 192.0.2.2/28 + sleep 1 + local rifs_occ_t1=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0 + 1)) + + ((expected_rifs == rifs_occ_t1)) + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + log_test "Add RIF for LAG on address addition" +} + +lag_rif_nomaster() +{ + RET=0 + + local rifs_occ_t0=$(devlink_resource_occ_get rifs) + ip link set dev $swp1 nomaster + sleep 1 + local rifs_occ_t1=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0 - 1)) + + ((expected_rifs == rifs_occ_t1)) + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + log_test "Drop RIF for LAG on port deslavement" +} + +lag_rif_remaster() +{ + RET=0 + + local rifs_occ_t0=$(devlink_resource_occ_get rifs) + ip link set dev $swp1 down + ip link set dev $swp1 master lag1 + ip link set dev $swp1 up + setup_wait_dev $swp1 + local rifs_occ_t1=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0 + 1)) + + ((expected_rifs == rifs_occ_t1)) + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + log_test "Add RIF for LAG on port reenslavement" +} + +lag_rif_nomaster_addr() +{ + local rifs_occ_t0=$(devlink_resource_occ_get rifs) + + # Adding an address while the port is LAG'd shouldn't generate a RIF. + __addr_add_del $swp1 add 192.0.2.65/28 + sleep 1 + local rifs_occ_t1=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0)) + + ((expected_rifs == rifs_occ_t1)) + check_err $? "After adding IP: Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + # Removing the port from LAG should drop RIF for the LAG (as tested in + # lag_rif_nomaster), but since the port now has an address, it should + # gain a RIF. + ip link set dev $swp1 nomaster + sleep 1 + local rifs_occ_t2=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0)) + + ((expected_rifs == rifs_occ_t2)) + check_err $? "After deslaving: Expected $expected_rifs RIFs, $rifs_occ_t2 are used" + + __addr_add_del $swp1 del 192.0.2.65/28 + log_test "Add RIF for port on deslavement from LAG" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_lag_vlan.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_lag_vlan.sh new file mode 100755 index 0000000000..6318cfa643 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/rif_lag_vlan.sh @@ -0,0 +1,146 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + lag_rif_add + lag_rif_nomaster + lag_rif_remaster + lag_rif_nomaster_addr +" + +NUM_NETIFS=2 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + team_create lag1 lacp + ip link set dev lag1 addrgenmode none + ip link set dev lag1 address $(mac_get $swp1) + + team_create lag2 lacp + ip link set dev lag2 addrgenmode none + ip link set dev lag2 address $(mac_get $swp2) + + ip link set dev $swp1 master lag1 + ip link set dev $swp1 up + + ip link set dev $swp2 master lag2 + ip link set dev $swp2 up + + vlan_create lag1 100 + ip link set dev lag1.100 addrgenmode none + + vlan_create lag1 200 + ip link set dev lag1.200 addrgenmode none +} + +cleanup() +{ + pre_cleanup + + ip link del dev lag1.200 + ip link del dev lag1.100 + + ip link set dev $swp2 nomaster + ip link set dev $swp2 down + + ip link set dev $swp1 nomaster + ip link set dev $swp1 down + + ip link del dev lag2 + ip link del dev lag1 +} + +lag_rif_add() +{ + RET=0 + + local rifs_occ_t0=$(devlink_resource_occ_get rifs) + __addr_add_del lag1.100 add 192.0.2.2/28 + __addr_add_del lag1.200 add 192.0.2.18/28 + sleep 1 + local rifs_occ_t1=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0 + 2)) + + ((expected_rifs == rifs_occ_t1)) + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + log_test "Add RIFs for LAG VLANs on address addition" +} + +lag_rif_nomaster() +{ + RET=0 + + local rifs_occ_t0=$(devlink_resource_occ_get rifs) + ip link set dev $swp1 nomaster + sleep 1 + local rifs_occ_t1=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0 - 2)) + + ((expected_rifs == rifs_occ_t1)) + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + log_test "Drop RIFs for LAG VLANs on port deslavement" +} + +lag_rif_remaster() +{ + RET=0 + + local rifs_occ_t0=$(devlink_resource_occ_get rifs) + ip link set dev $swp1 down + ip link set dev $swp1 master lag1 + ip link set dev $swp1 up + setup_wait_dev $swp1 + local rifs_occ_t1=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0 + 2)) + + ((expected_rifs == rifs_occ_t1)) + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + log_test "Add RIFs for LAG VLANs on port reenslavement" +} + +lag_rif_nomaster_addr() +{ + local rifs_occ_t0=$(devlink_resource_occ_get rifs) + + # Adding an address while the port is LAG'd shouldn't generate a RIF. + __addr_add_del $swp1 add 192.0.2.65/28 + sleep 1 + local rifs_occ_t1=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0)) + + ((expected_rifs == rifs_occ_t1)) + check_err $? "After adding IP: Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + # Removing the port from LAG should drop two RIFs for the LAG VLANs (as + # tested in lag_rif_nomaster), but since the port now has an address, it + # should gain a RIF. + ip link set dev $swp1 nomaster + sleep 1 + local rifs_occ_t2=$(devlink_resource_occ_get rifs) + local expected_rifs=$((rifs_occ_t0 - 1)) + + ((expected_rifs == rifs_occ_t2)) + check_err $? "After deslaving: Expected $expected_rifs RIFs, $rifs_occ_t2 are used" + + __addr_add_del $swp1 del 192.0.2.65/28 + log_test "Add RIF for port on deslavement from LAG" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profile_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profile_scale.sh new file mode 100644 index 0000000000..71e7681f15 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profile_scale.sh @@ -0,0 +1,72 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for RIF MAC profiles resource. The test adds VLAN netdevices according to +# the maximum number of RIF MAC profiles, sets each of them with a random +# MAC address, and checks that eventually the number of occupied RIF MAC +# profiles equals the maximum number of RIF MAC profiles. + + +RIF_MAC_PROFILE_NUM_NETIFS=2 + +rif_mac_profiles_create() +{ + local count=$1; shift + local should_fail=$1; shift + local batch_file="$(mktemp)" + + for ((i = 1; i <= count; i++)); do + vlan=$(( i*10 )) + m=$(( i*11 )) + + cat >> $batch_file <<-EOF + link add link $h1 name $h1.$vlan \ + address 00:$m:$m:$m:$m:$m type vlan id $vlan + address add 192.0.$m.1/24 dev $h1.$vlan + EOF + done + + ip -b $batch_file &> /dev/null + check_err_fail $should_fail $? "RIF creation" + + rm -f $batch_file +} + +rif_mac_profile_test() +{ + local count=$1; shift + local should_fail=$1; shift + + rif_mac_profiles_create $count $should_fail + + occ=$(devlink -j resource show $DEVLINK_DEV \ + | jq '.[][][] | select(.name=="rif_mac_profiles") |.["occ"]') + + [[ $occ -eq $count ]] + check_err_fail $should_fail $? "Attempt to use $count profiles (actual result $occ)" +} + +rif_mac_profile_setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + # Disable IPv6 on the two interfaces to avoid IPv6 link-local addresses + # being generated and RIFs being created. + sysctl_set net.ipv6.conf.$h1.disable_ipv6 1 + sysctl_set net.ipv6.conf.$h2.disable_ipv6 1 + + ip link set $h1 up + ip link set $h2 up +} + +rif_mac_profile_cleanup() +{ + pre_cleanup + + ip link set $h2 down + ip link set $h1 down + + sysctl_restore net.ipv6.conf.$h2.disable_ipv6 + sysctl_restore net.ipv6.conf.$h1.disable_ipv6 +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles.sh new file mode 100755 index 0000000000..c18340cee5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles.sh @@ -0,0 +1,213 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + mac_profile_test +" +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 + ip route add 198.51.100.0/24 vrf v$h1 nexthop via 192.0.2.2 + + tc qdisc add dev $h1 ingress +} + +h1_destroy() +{ + tc qdisc del dev $h1 ingress + + ip route del 198.51.100.0/24 vrf v$h1 + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/24 + ip route add 192.0.2.0/24 vrf v$h2 nexthop via 198.51.100.2 + + tc qdisc add dev $h2 ingress +} + +h2_destroy() +{ + tc qdisc del dev $h2 ingress + + ip route del 192.0.2.0/24 vrf v$h2 + simple_if_fini $h2 198.51.100.1/24 +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + tc qdisc add dev $rp1 clsact + tc qdisc add dev $rp2 clsact + ip address add 192.0.2.2/24 dev $rp1 + ip address add 198.51.100.2/24 dev $rp2 +} + +router_destroy() +{ + ip address del 198.51.100.2/24 dev $rp2 + ip address del 192.0.2.2/24 dev $rp1 + tc qdisc del dev $rp2 clsact + tc qdisc del dev $rp1 clsact + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + + router_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + router_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +h1_to_h2() +{ + local test_name=$@; shift + local smac=$(mac_get $rp2) + + RET=0 + + # Replace neighbour to avoid first packet being forwarded in software + ip neigh replace dev $rp2 198.51.100.1 lladdr $(mac_get $h2) + + # Add a filter to ensure that packets are forwarded in hardware. Cannot + # match on source MAC because it is not set in eACL after routing + tc filter add dev $rp2 egress proto ip pref 1 handle 101 \ + flower skip_sw ip_proto udp src_port 12345 dst_port 54321 \ + action pass + + # Add a filter to ensure that packets are received with the correct + # source MAC + tc filter add dev $h2 ingress proto ip pref 1 handle 101 \ + flower skip_sw src_mac $smac ip_proto udp src_port 12345 \ + dst_port 54321 action pass + + $MZ $h1 -a own -b $(mac_get $rp1) -t udp "sp=12345,dp=54321" \ + -A 192.0.2.1 -B 198.51.100.1 -c 10 -p 100 -d 1msec -q + + tc_check_packets "dev $rp2 egress" 101 10 + check_err $? "packets not forwarded in hardware" + + tc_check_packets "dev $h2 ingress" 101 10 + check_err $? "packets not forwarded with correct source mac" + + log_test "h1->h2: $test_name" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + tc filter del dev $rp2 egress protocol ip pref 1 handle 101 flower + ip neigh del dev $rp2 198.51.100.1 lladdr $(mac_get $h2) +} + +h2_to_h1() +{ + local test_name=$@; shift + local rp1_mac=$(mac_get $rp1) + + RET=0 + + ip neigh replace dev $rp1 192.0.2.1 lladdr $(mac_get $h1) + + tc filter add dev $rp1 egress proto ip pref 1 handle 101 \ + flower skip_sw ip_proto udp src_port 54321 dst_port 12345 \ + action pass + + tc filter add dev $h1 ingress proto ip pref 1 handle 101 \ + flower skip_sw src_mac $rp1_mac ip_proto udp src_port 54321 \ + dst_port 12345 action pass + + $MZ $h2 -a own -b $(mac_get $rp2) -t udp "sp=54321,dp=12345" \ + -A 198.51.100.1 -B 192.0.2.1 -c 10 -p 100 -d 1msec -q + + tc_check_packets "dev $rp1 egress" 101 10 + check_err $? "packets not forwarded in hardware" + + tc_check_packets "dev $h1 ingress" 101 10 + check_err $? "packets not forwarded with correct source mac" + + log_test "h2->h1: $test_name" + + tc filter del dev $h1 ingress protocol ip pref 1 handle 101 flower + tc filter del dev $rp1 egress protocol ip pref 1 handle 101 flower + ip neigh del dev $rp1 192.0.2.1 lladdr $(mac_get $h1) +} + +smac_test() +{ + local test_name=$@; shift + + # Test that packets forwarded to $h2 via $rp2 are forwarded with the + # current source MAC of $rp2 + h1_to_h2 $test_name + + # Test that packets forwarded to $h1 via $rp1 are forwarded with the + # current source MAC of $rp1. This MAC is never changed during the test, + # but given the shared nature of MAC profile, the point is to see that + # changes to the MAC of $rp2 do not affect that of $rp1 + h2_to_h1 $test_name +} + +mac_profile_test() +{ + local rp2_mac=$(mac_get $rp2) + + # Test behavior when the RIF backing $rp2 is transitioned to use + # a new MAC profile + ip link set dev $rp2 addr 00:11:22:33:44:55 + smac_test "new mac profile" + + # Test behavior when the MAC profile used by the RIF is edited + ip link set dev $rp2 address 00:22:22:22:22:22 + smac_test "edit mac profile" + + # Restore original MAC + ip link set dev $rp2 addr $rp2_mac +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +mac_profiles=$(devlink_resource_size_get rif_mac_profiles) +if [[ $mac_profiles -ne 1 ]]; then + tests_run +fi + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles_occ.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles_occ.sh new file mode 100755 index 0000000000..026a126f58 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles_occ.sh @@ -0,0 +1,147 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + rif_mac_profile_edit_test +" +NUM_NETIFS=2 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + # Disable IPv6 on the two interfaces to avoid IPv6 link-local addresses + # being generated and RIFs being created + sysctl_set net.ipv6.conf.$h1.disable_ipv6 1 + sysctl_set net.ipv6.conf.$h2.disable_ipv6 1 + + ip link set $h1 up + ip link set $h2 up +} + +cleanup() +{ + pre_cleanup + + ip link set $h2 down + ip link set $h1 down + + sysctl_restore net.ipv6.conf.$h2.disable_ipv6 + sysctl_restore net.ipv6.conf.$h1.disable_ipv6 + + # Reload in order to clean all the RIFs and RIF MAC profiles created + devlink_reload +} + +create_max_rif_mac_profiles() +{ + local count=$1; shift + local batch_file="$(mktemp)" + + for ((i = 1; i <= count; i++)); do + vlan=$(( i*10 )) + m=$(( i*11 )) + + cat >> $batch_file <<-EOF + link add link $h1 name $h1.$vlan \ + address 00:$m:$m:$m:$m:$m type vlan id $vlan + address add 192.0.$m.1/24 dev $h1.$vlan + EOF + done + + ip -b $batch_file &> /dev/null + rm -f $batch_file +} + +rif_mac_profile_replacement_test() +{ + local h1_10_mac=$(mac_get $h1.10) + + RET=0 + + ip link set $h1.10 address 00:12:34:56:78:99 + check_err $? + + log_test "RIF MAC profile replacement" + + ip link set $h1.10 address $h1_10_mac +} + +rif_mac_profile_consolidation_test() +{ + local count=$1; shift + local h1_20_mac + + RET=0 + + if [[ $count -eq 1 ]]; then + return + fi + + h1_20_mac=$(mac_get $h1.20) + + # Set the MAC of $h1.20 to that of $h1.10 and confirm that they are + # using the same MAC profile. + ip link set $h1.20 address 00:11:11:11:11:11 + check_err $? + + occ=$(devlink -j resource show $DEVLINK_DEV \ + | jq '.[][][] | select(.name=="rif_mac_profiles") |.["occ"]') + + [[ $occ -eq $((count - 1)) ]] + check_err $? "MAC profile occupancy did not decrease" + + log_test "RIF MAC profile consolidation" + + ip link set $h1.20 address $h1_20_mac +} + +rif_mac_profile_shared_replacement_test() +{ + local count=$1; shift + local i=$((count + 1)) + local vlan=$(( i*10 )) + local m=11 + + RET=0 + + # Create a VLAN netdevice that has the same MAC as the first one. + ip link add link $h1 name $h1.$vlan address 00:$m:$m:$m:$m:$m \ + type vlan id $vlan + ip address add 192.0.$m.1/24 dev $h1.$vlan + + # MAC replacement should fail because all the MAC profiles are in use + # and the profile is shared between multiple RIFs + m=$(( i*11 )) + ip link set $h1.$vlan address 00:$m:$m:$m:$m:$m &> /dev/null + check_fail $? + + log_test "RIF MAC profile shared replacement" + + ip link del dev $h1.$vlan +} + +rif_mac_profile_edit_test() +{ + local count=$(devlink_resource_size_get rif_mac_profiles) + + create_max_rif_mac_profiles $count + + rif_mac_profile_replacement_test + rif_mac_profile_consolidation_test $count + rif_mac_profile_shared_replacement_test $count +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/router_bridge_lag.sh b/tools/testing/selftests/drivers/net/mlxsw/router_bridge_lag.sh new file mode 100755 index 0000000000..6ce317cfaf --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/router_bridge_lag.sh @@ -0,0 +1,50 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test enslavement to LAG with a clean slate. +# See $lib_dir/router_bridge_lag.sh for further details. + +ALL_TESTS=" + config_devlink_reload + config_enslave_h1 + config_enslave_h2 + config_enslave_h3 + config_enslave_h4 + config_enslave_swp1 + config_enslave_swp2 + config_enslave_swp3 + config_enslave_swp4 + config_wait + ping_ipv4 + ping_ipv6 +" + +config_devlink_reload() +{ + log_info "Devlink reload" + devlink_reload +} + +config_enslave_h1() +{ + config_enslave $h1 lag1 +} + +config_enslave_h2() +{ + config_enslave $h2 lag4 +} + +config_enslave_h3() +{ + config_enslave $h3 lag4 +} + +config_enslave_h4() +{ + config_enslave $h4 lag1 +} + +lib_dir=$(dirname $0)/../../../net/forwarding +EXTRA_SOURCE="source $lib_dir/devlink_lib.sh" +source $lib_dir/router_bridge_lag.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh new file mode 100644 index 0000000000..683759d291 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh @@ -0,0 +1,142 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ROUTER_NUM_NETIFS=4 +: ${TIMEOUT:=20000} # ms + +router_h1_create() +{ + simple_if_init $h1 192.0.1.1/24 +} + +router_h1_destroy() +{ + simple_if_fini $h1 192.0.1.1/24 +} + +router_h2_create() +{ + simple_if_init $h2 192.0.2.1/24 + tc qdisc add dev $h2 handle ffff: ingress +} + +router_h2_destroy() +{ + tc qdisc del dev $h2 handle ffff: ingress + simple_if_fini $h2 192.0.2.1/24 +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + ip address add 192.0.1.2/24 dev $rp1 + ip address add 192.0.2.2/24 dev $rp2 +} + +router_destroy() +{ + ip address del 192.0.2.2/24 dev $rp2 + ip address del 192.0.1.2/24 dev $rp1 + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +router_setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + h1mac=$(mac_get $h1) + rp1mac=$(mac_get $rp1) + + vrf_prepare + + router_h1_create + router_h2_create + + router_create +} + +wait_for_routes() +{ + local t0=$1; shift + local route_count=$1; shift + + local t1=$(ip route | grep 'offload' | grep -v 'offload_failed' | wc -l) + local delta=$((t1 - t0)) + echo $delta + [[ $delta -ge $route_count ]] +} + +router_routes_create() +{ + local route_count=$1 + local count=0 + + ROUTE_FILE="$(mktemp)" + + for i in {0..255} + do + for j in {0..255} + do + for k in {0..255} + do + if [[ $count -eq $route_count ]]; then + break 3 + fi + + echo route add 193.${i}.${j}.${k}/32 dev $rp2 \ + >> $ROUTE_FILE + ((count++)) + done + done + done + + ip -b $ROUTE_FILE &> /dev/null +} + +router_routes_destroy() +{ + if [[ -v ROUTE_FILE ]]; then + rm -f $ROUTE_FILE + fi +} + +router_test() +{ + local route_count=$1 + local should_fail=$2 + local delta + + RET=0 + + local t0=$(ip route | grep -o 'offload' | wc -l) + router_routes_create $route_count + delta=$(busywait "$TIMEOUT" wait_for_routes $t0 $route_count) + + check_err_fail $should_fail $? "Offload routes: Expected $route_count, got $delta." + if [[ $RET -ne 0 ]] || [[ $should_fail -eq 1 ]]; then + return + fi + + router_routes_destroy +} + +router_cleanup() +{ + pre_cleanup + + router_routes_destroy + router_destroy + + router_h2_destroy + router_h1_destroy + + vrf_cleanup +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh new file mode 100755 index 0000000000..893a693ad8 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh @@ -0,0 +1,941 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test various interface configuration scenarios. Observe that configurations +# deemed valid by mlxsw succeed, invalid configurations fail and that no traces +# are produced. To prevent the test from passing in case traces are produced, +# the user can set the 'kernel.panic_on_warn' and 'kernel.panic_on_oops' +# sysctls in its environment. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + rif_vrf_set_addr_test + rif_non_inherit_bridge_addr_test + vlan_interface_deletion_test + bridge_deletion_test + bridge_vlan_flags_test + vlan_1_test + duplicate_vlans_test + vlan_rif_refcount_test + subport_rif_refcount_test + subport_rif_lag_join_test + vlan_dev_deletion_test + lag_unlink_slaves_test + lag_dev_deletion_test + vlan_interface_uppers_test + bridge_extern_learn_test + neigh_offload_test + nexthop_offload_test + nexthop_obj_invalid_test + nexthop_obj_offload_test + nexthop_obj_group_offload_test + nexthop_obj_bucket_offload_test + nexthop_obj_blackhole_offload_test + nexthop_obj_route_offload_test + bridge_locked_port_test + devlink_reload_test +" +NUM_NETIFS=2 +: ${TIMEOUT:=20000} # ms +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +rif_vrf_set_addr_test() +{ + # Test that it is possible to set an IP address on a VRF upper despite + # its random MAC address. + RET=0 + + ip link add name vrf-test type vrf table 10 + ip link set dev $swp1 master vrf-test + + ip -4 address add 192.0.2.1/24 dev vrf-test + check_err $? "failed to set IPv4 address on VRF" + ip -6 address add 2001:db8:1::1/64 dev vrf-test + check_err $? "failed to set IPv6 address on VRF" + + log_test "RIF - setting IP address on VRF" + + ip link del dev vrf-test +} + +rif_non_inherit_bridge_addr_test() +{ + local swp2_mac=$(mac_get $swp2) + + RET=0 + + # Create first RIF + ip addr add dev $swp1 192.0.2.1/28 + check_err $? + + # Create a FID RIF + ip link add name br1 up type bridge vlan_filtering 0 + ip link set dev br1 addr $swp2_mac + ip link set dev $swp2 master br1 + ip addr add dev br1 192.0.2.17/28 + check_err $? + + # Prepare a device with a low MAC address + ip link add name d up type dummy + ip link set dev d addr 00:11:22:33:44:55 + + # Attach the device to br1. Since the bridge address was set, it should + # work. + ip link set dev d master br1 &>/dev/null + check_err $? "Could not attach a device with low MAC to a bridge with RIF" + + # Port MAC address change should be allowed for a bridge with set MAC. + ip link set dev $swp2 addr 00:11:22:33:44:55 + check_err $? "Changing swp2's MAC address not permitted" + + log_test "RIF - attach port with bad MAC to bridge with set MAC" + + ip link set dev $swp2 addr $swp2_mac + ip link del dev d + ip link del dev br1 + ip addr del dev $swp1 192.0.2.1/28 +} + +vlan_interface_deletion_test() +{ + # Test that when a VLAN interface is deleted, its associated router + # interface (RIF) is correctly deleted and not leaked. See commit + # c360867ec46a ("mlxsw: spectrum: Delete RIF when VLAN device is + # removed") for more details + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + + ip link add link br0 name br0.10 type vlan id 10 + ip -6 address add 2001:db8:1::1/64 dev br0.10 + ip link del dev br0.10 + + # If we leaked the previous RIF, then this should produce a trace + ip link add link br0 name br0.20 type vlan id 20 + ip -6 address add 2001:db8:1::1/64 dev br0.20 + ip link del dev br0.20 + + log_test "vlan interface deletion" + + ip link del dev br0 +} + +bridge_deletion_test() +{ + # Test that when a bridge with VLAN interfaces is deleted, we correctly + # delete the associated RIFs. See commit 602b74eda813 ("mlxsw: + # spectrum_switchdev: Do not leak RIFs when removing bridge") for more + # details + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + ip -6 address add 2001:db8::1/64 dev br0 + + ip link add link br0 name br0.10 type vlan id 10 + ip -6 address add 2001:db8:1::1/64 dev br0.10 + + ip link add link br0 name br0.20 type vlan id 20 + ip -6 address add 2001:db8:2::1/64 dev br0.20 + + ip link del dev br0 + + # If we leaked previous RIFs, then this should produce a trace + ip -6 address add 2001:db8:1::1/64 dev $swp1 + ip -6 address del 2001:db8:1::1/64 dev $swp1 + + log_test "bridge deletion" +} + +bridge_vlan_flags_test() +{ + # Test that when bridge VLAN flags are toggled, we do not take + # unnecessary references on related structs. See commit 9e25826ffc94 + # ("mlxsw: spectrum_switchdev: Fix port_vlan refcounting") for more + # details + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + + bridge vlan add vid 10 dev $swp1 pvid untagged + bridge vlan add vid 10 dev $swp1 untagged + bridge vlan add vid 10 dev $swp1 pvid + bridge vlan add vid 10 dev $swp1 + ip link del dev br0 + + # If we did not handle references correctly, then this should produce a + # trace + devlink dev reload "$DEVLINK_DEV" + + # Allow netdevices to be re-created following the reload + sleep 20 + + log_test "bridge vlan flags" +} + +vlan_1_test() +{ + # Test that VLAN 1 can be configured over mlxsw ports. In the past it + # was used internally for untagged traffic. See commit 47bf9df2e820 + # ("mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAG") for more + # details + RET=0 + + ip link add link $swp1 name $swp1.1 type vlan id 1 + check_err $? "did not manage to create vlan 1 when should" + + log_test "vlan 1" + + ip link del dev $swp1.1 +} + +duplicate_vlans_test() +{ + # Test that on a given port a VLAN is only used once. Either as VLAN + # in a VLAN-aware bridge or as a VLAN device + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + bridge vlan add vid 10 dev $swp1 + + ip link add link $swp1 name $swp1.10 type vlan id 10 &> /dev/null + check_fail $? "managed to create vlan device when should not" + + bridge vlan del vid 10 dev $swp1 + ip link add link $swp1 name $swp1.10 type vlan id 10 + check_err $? "did not manage to create vlan device when should" + bridge vlan add vid 10 dev $swp1 &> /dev/null + check_fail $? "managed to add bridge vlan when should not" + + log_test "duplicate vlans" + + ip link del dev $swp1.10 + ip link del dev br0 +} + +vlan_rif_refcount_test() +{ + # Test that RIFs representing VLAN interfaces are not affected from + # ports member in the VLAN. We use the offload indication on routes + # configured on the RIF to understand if it was created / destroyed + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + + ip link set dev $swp1 up + ip link set dev br0 up + + ip link add link br0 name br0.10 up type vlan id 10 + ip -6 address add 2001:db8:1::1/64 dev br0.10 + + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 + check_err $? "vlan rif was not created before adding port to vlan" + + bridge vlan add vid 10 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 + check_err $? "vlan rif was destroyed after adding port to vlan" + + bridge vlan del vid 10 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 + check_err $? "vlan rif was destroyed after removing port from vlan" + + ip link set dev $swp1 nomaster + busywait "$TIMEOUT" not wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 + check_err $? "vlan rif was not destroyed after unlinking port from bridge" + + log_test "vlan rif refcount" + + ip link del dev br0.10 + ip link set dev $swp1 down + ip link del dev br0 +} + +subport_rif_refcount_test() +{ + # Test that RIFs representing upper devices of physical ports are + # reference counted correctly and destroyed when should. We use the + # offload indication on routes configured on the RIF to understand if + # it was created / destroyed + RET=0 + + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp2 down + ip link set dev $swp1 master bond1 + ip link set dev $swp2 master bond1 + + ip link set dev bond1 up + ip link add link bond1 name bond1.10 up type vlan id 10 + ip -6 address add 2001:db8:1::1/64 dev bond1 + ip -6 address add 2001:db8:2::1/64 dev bond1.10 + + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif was not created on lag device" + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 + check_err $? "subport rif was not created on vlan device" + + ip link set dev $swp1 nomaster + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif of lag device was destroyed when should not" + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 + check_err $? "subport rif of vlan device was destroyed when should not" + + ip link set dev $swp2 nomaster + busywait "$TIMEOUT" not wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif of lag device was not destroyed when should" + busywait "$TIMEOUT" not wait_for_offload \ + ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 + check_err $? "subport rif of vlan device was not destroyed when should" + + log_test "subport rif refcount" + + ip link del dev bond1.10 + ip link del dev bond1 +} + +subport_rif_lag_join_test() +{ + # Test that the reference count of a RIF configured for a LAG is + # incremented / decremented when ports join / leave the LAG. We use the + # offload indication on routes configured on the RIF to understand if + # it was created / destroyed + RET=0 + + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp2 down + ip link set dev $swp1 master bond1 + ip link set dev $swp2 master bond1 + + ip link set dev bond1 up + ip -6 address add 2001:db8:1::1/64 dev bond1 + + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif was not created on lag device" + + ip link set dev $swp1 nomaster + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif of lag device was destroyed after removing one port" + + ip link set dev $swp1 master bond1 + ip link set dev $swp2 nomaster + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif of lag device was destroyed after re-adding a port and removing another" + + ip link set dev $swp1 nomaster + busywait "$TIMEOUT" not wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif of lag device was not destroyed when should" + + log_test "subport rif lag join" + + ip link del dev bond1 +} + +vlan_dev_deletion_test() +{ + # Test that VLAN devices are correctly deleted / unlinked when enslaved + # to bridge + RET=0 + + ip link add name br10 type bridge + ip link add name br20 type bridge + ip link add name br30 type bridge + ip link add link $swp1 name $swp1.10 type vlan id 10 + ip link add link $swp1 name $swp1.20 type vlan id 20 + ip link add link $swp1 name $swp1.30 type vlan id 30 + ip link set dev $swp1.10 master br10 + ip link set dev $swp1.20 master br20 + ip link set dev $swp1.30 master br30 + + # If we did not handle the situation correctly, then these operations + # might produce a trace + ip link set dev $swp1.30 nomaster + ip link del dev $swp1.20 + # Deletion via ioctl uses different code paths from netlink + vconfig rem $swp1.10 &> /dev/null + + log_test "vlan device deletion" + + ip link del dev $swp1.30 + ip link del dev br30 + ip link del dev br20 + ip link del dev br10 +} + +lag_create() +{ + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp2 down + ip link set dev $swp1 master bond1 + ip link set dev $swp2 master bond1 + + ip link add link bond1 name bond1.10 type vlan id 10 + ip link add link bond1 name bond1.20 type vlan id 20 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev bond1 master br0 + + ip link add name br10 type bridge + ip link set dev bond1.10 master br10 + + ip link add name br20 type bridge + ip link set dev bond1.20 master br20 +} + +lag_unlink_slaves_test() +{ + # Test that ports are correctly unlinked from their LAG master, when + # the LAG and its VLAN uppers are enslaved to bridges + RET=0 + + lag_create + + ip link set dev $swp1 nomaster + check_err $? "lag slave $swp1 was not unlinked from master" + ip link set dev $swp2 nomaster + check_err $? "lag slave $swp2 was not unlinked from master" + + # Try to configure corresponding VLANs as router interfaces + ip -6 address add 2001:db8:1::1/64 dev $swp1 + check_err $? "failed to configure ip address on $swp1" + + ip link add link $swp1 name $swp1.10 type vlan id 10 + ip -6 address add 2001:db8:10::1/64 dev $swp1.10 + check_err $? "failed to configure ip address on $swp1.10" + + ip link add link $swp1 name $swp1.20 type vlan id 20 + ip -6 address add 2001:db8:20::1/64 dev $swp1.20 + check_err $? "failed to configure ip address on $swp1.20" + + log_test "lag slaves unlinking" + + ip link del dev $swp1.20 + ip link del dev $swp1.10 + ip address flush dev $swp1 + + ip link del dev br20 + ip link del dev br10 + ip link del dev br0 + ip link del dev bond1 +} + +lag_dev_deletion_test() +{ + # Test that LAG device is correctly deleted, when the LAG and its VLAN + # uppers are enslaved to bridges + RET=0 + + lag_create + + ip link del dev bond1 + + log_test "lag device deletion" + + ip link del dev br20 + ip link del dev br10 + ip link del dev br0 +} + +vlan_interface_uppers_test() +{ + # Test that uppers of a VLAN interface are correctly sanitized + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + + ip link add link br0 name br0.10 type vlan id 10 + + ip -6 address add 2001:db8:1::1/64 dev br0.10 + ip link add link br0.10 name macvlan0 type macvlan mode private + check_err $? "did not manage to create a macvlan when should" + + ip link del dev macvlan0 + + ip link add name vrf-test type vrf table 10 + ip link set dev br0.10 master vrf-test + check_err $? "did not manage to enslave vlan interface to vrf" + ip link del dev vrf-test + + ip link add name br-test type bridge + ip link set dev br0.10 master br-test &> /dev/null + check_fail $? "managed to enslave vlan interface to bridge when should not" + ip link del dev br-test + + log_test "vlan interface uppers" + + ip link del dev br0 +} + +bridge_extern_learn_test() +{ + # Test that externally learned entries added from user space are + # marked as offloaded + RET=0 + + ip link add name br0 type bridge + ip link set dev $swp1 master br0 + + bridge fdb add de:ad:be:ef:13:37 dev $swp1 master extern_learn + + busywait "$TIMEOUT" wait_for_offload \ + bridge fdb show brport $swp1 de:ad:be:ef:13:37 + check_err $? "fdb entry not marked as offloaded when should" + + log_test "externally learned fdb entry" + + ip link del dev br0 +} + +neigh_offload_test() +{ + # Test that IPv4 and IPv6 neighbour entries are marked as offloaded + RET=0 + + ip -4 address add 192.0.2.1/24 dev $swp1 + ip -6 address add 2001:db8:1::1/64 dev $swp1 + + ip -4 neigh add 192.0.2.2 lladdr de:ad:be:ef:13:37 nud perm dev $swp1 + ip -6 neigh add 2001:db8:1::2 lladdr de:ad:be:ef:13:37 nud perm \ + dev $swp1 + + busywait "$TIMEOUT" wait_for_offload \ + ip -4 neigh show dev $swp1 192.0.2.2 + check_err $? "ipv4 neigh entry not marked as offloaded when should" + busywait "$TIMEOUT" wait_for_offload \ + ip -6 neigh show dev $swp1 2001:db8:1::2 + check_err $? "ipv6 neigh entry not marked as offloaded when should" + + log_test "neighbour offload indication" + + ip -6 neigh del 2001:db8:1::2 dev $swp1 + ip -4 neigh del 192.0.2.2 dev $swp1 + ip -6 address del 2001:db8:1::1/64 dev $swp1 + ip -4 address del 192.0.2.1/24 dev $swp1 +} + +nexthop_offload_test() +{ + # Test that IPv4 and IPv6 nexthops are marked as offloaded + RET=0 + + sysctl_set net.ipv6.conf.$swp2.keep_addr_on_down 1 + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 192.0.2.2/24 2001:db8:1::2/64 + setup_wait + + ip -4 route add 198.51.100.0/24 vrf v$swp1 \ + nexthop via 192.0.2.2 dev $swp1 + ip -6 route add 2001:db8:2::/64 vrf v$swp1 \ + nexthop via 2001:db8:1::2 dev $swp1 + + busywait "$TIMEOUT" wait_for_offload \ + ip -4 route show 198.51.100.0/24 vrf v$swp1 + check_err $? "ipv4 nexthop not marked as offloaded when should" + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route show 2001:db8:2::/64 vrf v$swp1 + check_err $? "ipv6 nexthop not marked as offloaded when should" + + ip link set dev $swp2 down + sleep 1 + + busywait "$TIMEOUT" not wait_for_offload \ + ip -4 route show 198.51.100.0/24 vrf v$swp1 + check_err $? "ipv4 nexthop marked as offloaded when should not" + busywait "$TIMEOUT" not wait_for_offload \ + ip -6 route show 2001:db8:2::/64 vrf v$swp1 + check_err $? "ipv6 nexthop marked as offloaded when should not" + + ip link set dev $swp2 up + setup_wait + + busywait "$TIMEOUT" wait_for_offload \ + ip -4 route show 198.51.100.0/24 vrf v$swp1 + check_err $? "ipv4 nexthop not marked as offloaded after neigh add" + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route show 2001:db8:2::/64 vrf v$swp1 + check_err $? "ipv6 nexthop not marked as offloaded after neigh add" + + log_test "nexthop offload indication" + + ip -6 route del 2001:db8:2::/64 vrf v$swp1 + ip -4 route del 198.51.100.0/24 vrf v$swp1 + + simple_if_fini $swp2 192.0.2.2/24 2001:db8:1::2/64 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 + sysctl_restore net.ipv6.conf.$swp2.keep_addr_on_down +} + +nexthop_obj_invalid_test() +{ + # Test that invalid nexthop object configurations are rejected + RET=0 + + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 192.0.2.2/24 2001:db8:1::2/64 + setup_wait + + ip nexthop add id 1 via 192.0.2.3 fdb + check_fail $? "managed to configure an FDB nexthop when should not" + + ip nexthop add id 1 encap mpls 200/300 via 192.0.2.3 dev $swp1 + check_fail $? "managed to configure a nexthop with MPLS encap when should not" + + ip nexthop add id 1 dev $swp1 + ip nexthop add id 2 dev $swp1 + ip nexthop add id 3 via 192.0.2.3 dev $swp1 + ip nexthop add id 10 group 1/2 + check_fail $? "managed to configure a nexthop group with device-only nexthops when should not" + + ip nexthop add id 10 group 3 type resilient buckets 7 + check_fail $? "managed to configure a too small resilient nexthop group when should not" + + ip nexthop add id 10 group 3 type resilient buckets 129 + check_fail $? "managed to configure a resilient nexthop group with invalid number of buckets when should not" + + ip nexthop add id 10 group 1/2 type resilient buckets 32 + check_fail $? "managed to configure a resilient nexthop group with device-only nexthops when should not" + + ip nexthop add id 10 group 3 type resilient buckets 32 + check_err $? "failed to configure a valid resilient nexthop group" + ip nexthop replace id 3 dev $swp1 + check_fail $? "managed to populate a nexthop bucket with a device-only nexthop when should not" + + log_test "nexthop objects - invalid configurations" + + ip nexthop del id 10 + ip nexthop del id 3 + ip nexthop del id 2 + ip nexthop del id 1 + + simple_if_fini $swp2 192.0.2.2/24 2001:db8:1::2/64 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 +} + +nexthop_obj_offload_test() +{ + # Test offload indication of nexthop objects + RET=0 + + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 + setup_wait + + ip nexthop add id 1 via 192.0.2.2 dev $swp1 + ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 1 + check_err $? "nexthop not marked as offloaded when should" + + ip neigh replace 192.0.2.2 nud failed dev $swp1 + busywait "$TIMEOUT" not wait_for_offload \ + ip nexthop show id 1 + check_err $? "nexthop marked as offloaded after setting neigh to failed state" + + ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 1 + check_err $? "nexthop not marked as offloaded after neigh replace" + + ip nexthop replace id 1 via 192.0.2.3 dev $swp1 + busywait "$TIMEOUT" not wait_for_offload \ + ip nexthop show id 1 + check_err $? "nexthop marked as offloaded after replacing to use an invalid address" + + ip nexthop replace id 1 via 192.0.2.2 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 1 + check_err $? "nexthop not marked as offloaded after replacing to use a valid address" + + log_test "nexthop objects offload indication" + + ip neigh del 192.0.2.2 dev $swp1 + ip nexthop del id 1 + + simple_if_fini $swp2 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 +} + +nexthop_obj_group_offload_test() +{ + # Test offload indication of nexthop group objects + RET=0 + + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 + setup_wait + + ip nexthop add id 1 via 192.0.2.2 dev $swp1 + ip nexthop add id 2 via 2001:db8:1::2 dev $swp1 + ip nexthop add id 10 group 1/2 + ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + ip neigh replace 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + ip neigh replace 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 1 + check_err $? "IPv4 nexthop not marked as offloaded when should" + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 2 + check_err $? "IPv6 nexthop not marked as offloaded when should" + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 10 + check_err $? "nexthop group not marked as offloaded when should" + + # Invalidate nexthop id 1 + ip neigh replace 192.0.2.2 nud failed dev $swp1 + busywait "$TIMEOUT" not wait_for_offload \ + ip nexthop show id 10 + check_fail $? "nexthop group not marked as offloaded with one valid nexthop" + + # Invalidate nexthop id 2 + ip neigh replace 2001:db8:1::2 nud failed dev $swp1 + busywait "$TIMEOUT" not wait_for_offload \ + ip nexthop show id 10 + check_err $? "nexthop group marked as offloaded when should not" + + # Revalidate nexthop id 1 + ip nexthop replace id 1 via 192.0.2.3 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 10 + check_err $? "nexthop group not marked as offloaded after revalidating nexthop" + + log_test "nexthop group objects offload indication" + + ip neigh del 2001:db8:1::2 dev $swp1 + ip neigh del 192.0.2.3 dev $swp1 + ip neigh del 192.0.2.2 dev $swp1 + ip nexthop del id 10 + ip nexthop del id 2 + ip nexthop del id 1 + + simple_if_fini $swp2 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 +} + +nexthop_obj_bucket_offload_test() +{ + # Test offload indication of nexthop buckets + RET=0 + + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 + setup_wait + + ip nexthop add id 1 via 192.0.2.2 dev $swp1 + ip nexthop add id 2 via 2001:db8:1::2 dev $swp1 + ip nexthop add id 10 group 1/2 type resilient buckets 32 idle_timer 0 + ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + ip neigh replace 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + ip neigh replace 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop bucket show nhid 1 + check_err $? "IPv4 nexthop buckets not marked as offloaded when should" + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop bucket show nhid 2 + check_err $? "IPv6 nexthop buckets not marked as offloaded when should" + + # Invalidate nexthop id 1 + ip neigh replace 192.0.2.2 nud failed dev $swp1 + busywait "$TIMEOUT" wait_for_trap \ + ip nexthop bucket show nhid 1 + check_err $? "IPv4 nexthop buckets not marked with trap when should" + + # Invalidate nexthop id 2 + ip neigh replace 2001:db8:1::2 nud failed dev $swp1 + busywait "$TIMEOUT" wait_for_trap \ + ip nexthop bucket show nhid 2 + check_err $? "IPv6 nexthop buckets not marked with trap when should" + + # Revalidate nexthop id 1 by changing its configuration + ip nexthop replace id 1 via 192.0.2.3 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop bucket show nhid 1 + check_err $? "nexthop bucket not marked as offloaded after revalidating nexthop" + + # Revalidate nexthop id 2 by changing its neighbour + ip neigh replace 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop bucket show nhid 2 + check_err $? "nexthop bucket not marked as offloaded after revalidating neighbour" + + log_test "nexthop bucket offload indication" + + ip neigh del 2001:db8:1::2 dev $swp1 + ip neigh del 192.0.2.3 dev $swp1 + ip neigh del 192.0.2.2 dev $swp1 + ip nexthop del id 10 + ip nexthop del id 2 + ip nexthop del id 1 + + simple_if_fini $swp2 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 +} + +nexthop_obj_blackhole_offload_test() +{ + # Test offload indication of blackhole nexthop objects + RET=0 + + ip nexthop add id 1 blackhole + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 1 + check_err $? "Blackhole nexthop not marked as offloaded when should" + + ip nexthop add id 10 group 1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 10 + check_err $? "Nexthop group not marked as offloaded when should" + + log_test "blackhole nexthop objects offload indication" + + ip nexthop del id 10 + ip nexthop del id 1 +} + +nexthop_obj_route_offload_test() +{ + # Test offload indication of routes using nexthop objects + RET=0 + + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 + setup_wait + + ip nexthop add id 1 via 192.0.2.2 dev $swp1 + ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + ip neigh replace 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm \ + dev $swp1 + + ip route replace 198.51.100.0/24 nhid 1 + busywait "$TIMEOUT" wait_for_offload \ + ip route show 198.51.100.0/24 + check_err $? "route not marked as offloaded when using valid nexthop" + + ip nexthop replace id 1 via 192.0.2.3 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip route show 198.51.100.0/24 + check_err $? "route not marked as offloaded after replacing valid nexthop with a valid one" + + ip nexthop replace id 1 via 192.0.2.4 dev $swp1 + busywait "$TIMEOUT" not wait_for_offload \ + ip route show 198.51.100.0/24 + check_err $? "route marked as offloaded after replacing valid nexthop with an invalid one" + + ip nexthop replace id 1 via 192.0.2.2 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip route show 198.51.100.0/24 + check_err $? "route not marked as offloaded after replacing invalid nexthop with a valid one" + + log_test "routes using nexthop objects offload indication" + + ip route del 198.51.100.0/24 + ip neigh del 192.0.2.3 dev $swp1 + ip neigh del 192.0.2.2 dev $swp1 + ip nexthop del id 1 + + simple_if_fini $swp2 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 +} + +bridge_locked_port_test() +{ + RET=0 + + ip link add name br1 up type bridge vlan_filtering 0 + + ip link add link $swp1 name $swp1.10 type vlan id 10 + ip link set dev $swp1.10 master br1 + + bridge link set dev $swp1.10 locked on + check_fail $? "managed to set locked flag on a VLAN upper" + + ip link set dev $swp1.10 nomaster + ip link set dev $swp1 master br1 + + bridge link set dev $swp1 locked on + check_fail $? "managed to set locked flag on a bridge port that has a VLAN upper" + + ip link del dev $swp1.10 + bridge link set dev $swp1 locked on + + ip link add link $swp1 name $swp1.10 type vlan id 10 + check_fail $? "managed to configure a VLAN upper on a locked port" + + log_test "bridge locked port" + + ip link del dev $swp1.10 &> /dev/null + ip link del dev br1 +} + +devlink_reload_test() +{ + # Test that after executing all the above configuration tests, a + # devlink reload can be performed without errors + RET=0 + + devlink dev reload "$DEVLINK_DEV" + check_err $? "devlink reload failed" + + log_test "devlink reload - last test" + + sleep 20 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_ets.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_ets.sh new file mode 100755 index 0000000000..139175fd03 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_ets.sh @@ -0,0 +1,81 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# A driver for the ETS selftest that implements testing in offloaded datapath. +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/sch_ets_core.sh +source $lib_dir/devlink_lib.sh + +ALL_TESTS=" + ping_ipv4 + priomap_mode + ets_test_strict + ets_test_mixed + ets_test_dwrr +" + +PARENT="parent 3:3" + +switch_create() +{ + # Create a bottleneck so that the DWRR process can kick in. + tc qdisc replace dev $swp2 root handle 3: tbf rate 1gbit \ + burst 128K limit 1G + + ets_switch_create + + # Set the ingress quota high and use the three egress TCs to limit the + # amount of traffic that is admitted to the shared buffers. This makes + # sure that there is always enough traffic of all types to select from + # for the DWRR process. + devlink_port_pool_th_save $swp1 0 + devlink_port_pool_th_set $swp1 0 12 + devlink_tc_bind_pool_th_save $swp1 0 ingress + devlink_tc_bind_pool_th_set $swp1 0 ingress 0 12 + devlink_port_pool_th_save $swp2 4 + devlink_port_pool_th_set $swp2 4 12 + devlink_tc_bind_pool_th_save $swp2 7 egress + devlink_tc_bind_pool_th_set $swp2 7 egress 4 5 + devlink_tc_bind_pool_th_save $swp2 6 egress + devlink_tc_bind_pool_th_set $swp2 6 egress 4 5 + devlink_tc_bind_pool_th_save $swp2 5 egress + devlink_tc_bind_pool_th_set $swp2 5 egress 4 5 + + # Note: sch_ets_core.sh uses VLAN ingress-qos-map to assign packet + # priorities at $swp1 based on their 802.1p headers. ingress-qos-map is + # not offloaded by mlxsw as of this writing, but the mapping used is + # 1:1, which is the mapping currently hard-coded by the driver. +} + +switch_destroy() +{ + devlink_tc_bind_pool_th_restore $swp2 5 egress + devlink_tc_bind_pool_th_restore $swp2 6 egress + devlink_tc_bind_pool_th_restore $swp2 7 egress + devlink_port_pool_th_restore $swp2 4 + devlink_tc_bind_pool_th_restore $swp1 0 ingress + devlink_port_pool_th_restore $swp1 0 + + ets_switch_destroy + + tc qdisc del dev $swp2 root handle 3: +} + +# Callback from sch_ets_tests.sh +collect_stats() +{ + local -a streams=("$@") + local stream + + # Wait for qdisc counter update so that we don't get it mid-way through. + busywait_for_counter 1000 +1 \ + qdisc_parent_stats_get $swp2 10:$((${streams[0]} + 1)) .bytes \ + > /dev/null + + for stream in ${streams[@]}; do + qdisc_parent_stats_get $swp2 10:$((stream + 1)) .bytes + done +} + +bail_on_lldpad "configure DCB" "configure Qdiscs" +ets_run diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_offload.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_offload.sh new file mode 100755 index 0000000000..071a33d10c --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_offload.sh @@ -0,0 +1,290 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test qdisc offload indication + + +ALL_TESTS=" + test_root + test_port_tbf + test_etsprio + test_etsprio_port_tbf +" +NUM_NETIFS=1 +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/lib.sh + +check_not_offloaded() +{ + local handle=$1; shift + local h + local offloaded + + h=$(qdisc_stats_get $h1 "$handle" .handle) + [[ $h == '"'$handle'"' ]] + check_err $? "Qdisc with handle $handle does not exist" + + offloaded=$(qdisc_stats_get $h1 "$handle" .offloaded) + [[ $offloaded == true ]] + check_fail $? "Qdisc with handle $handle offloaded, but should not be" +} + +check_all_offloaded() +{ + local handle=$1; shift + + if [[ ! -z $handle ]]; then + local offloaded=$(qdisc_stats_get $h1 "$handle" .offloaded) + [[ $offloaded == true ]] + check_err $? "Qdisc with handle $handle not offloaded" + fi + + local unoffloaded=$(tc q sh dev $h1 invisible | + grep -v offloaded | + sed s/root/parent\ root/ | + cut -d' ' -f 5) + [[ -z $unoffloaded ]] + check_err $? "Qdiscs with following parents not offloaded: $unoffloaded" + + pre_cleanup +} + +with_ets() +{ + local handle=$1; shift + local locus=$1; shift + + tc qdisc add dev $h1 $locus handle $handle \ + ets bands 8 priomap 7 6 5 4 3 2 1 0 + "$@" + tc qdisc del dev $h1 $locus +} + +with_prio() +{ + local handle=$1; shift + local locus=$1; shift + + tc qdisc add dev $h1 $locus handle $handle \ + prio bands 8 priomap 7 6 5 4 3 2 1 0 + "$@" + tc qdisc del dev $h1 $locus +} + +with_red() +{ + local handle=$1; shift + local locus=$1; shift + + tc qdisc add dev $h1 $locus handle $handle \ + red limit 1000000 min 200000 max 300000 probability 0.5 avpkt 1500 + "$@" + tc qdisc del dev $h1 $locus +} + +with_tbf() +{ + local handle=$1; shift + local locus=$1; shift + + tc qdisc add dev $h1 $locus handle $handle \ + tbf rate 400Mbit burst 128K limit 1M + "$@" + tc qdisc del dev $h1 $locus +} + +with_pfifo() +{ + local handle=$1; shift + local locus=$1; shift + + tc qdisc add dev $h1 $locus handle $handle pfifo limit 100K + "$@" + tc qdisc del dev $h1 $locus +} + +with_bfifo() +{ + local handle=$1; shift + local locus=$1; shift + + tc qdisc add dev $h1 $locus handle $handle bfifo limit 100K + "$@" + tc qdisc del dev $h1 $locus +} + +with_drr() +{ + local handle=$1; shift + local locus=$1; shift + + tc qdisc add dev $h1 $locus handle $handle drr + "$@" + tc qdisc del dev $h1 $locus +} + +with_qdiscs() +{ + local handle=$1; shift + local parent=$1; shift + local kind=$1; shift + local next_handle=$((handle * 2)) + local locus; + + if [[ $kind == "--" ]]; then + local cmd=$1; shift + $cmd $(printf %x: $parent) "$@" + else + if ((parent == 0)); then + locus=root + else + locus=$(printf "parent %x:1" $parent) + fi + + with_$kind $(printf %x: $handle) "$locus" \ + with_qdiscs $next_handle $handle "$@" + fi +} + +get_name() +{ + local parent=$1; shift + local name=$(echo "" "${@^^}" | tr ' ' -) + + if ((parent != 0)); then + kind=$(qdisc_stats_get $h1 $parent: .kind) + kind=${kind%\"} + kind=${kind#\"} + name="-${kind^^}$name" + fi + + echo root$name +} + +do_test_offloaded() +{ + local handle=$1; shift + local parent=$1; shift + + RET=0 + with_qdiscs $handle $parent "$@" -- check_all_offloaded + log_test $(get_name $parent "$@")" offloaded" +} + +do_test_nooffload() +{ + local handle=$1; shift + local parent=$1; shift + + local name=$(echo "${@^^}" | tr ' ' -) + local kind + + RET=0 + with_qdiscs $handle $parent "$@" -- check_not_offloaded + log_test $(get_name $parent "$@")" not offloaded" +} + +do_test_combinations() +{ + local handle=$1; shift + local parent=$1; shift + + local cont + local leaf + local fifo + + for cont in "" ets prio; do + for leaf in "" red tbf "red tbf" "tbf red"; do + for fifo in "" pfifo bfifo; do + if [[ -z "$cont$leaf$fifo" ]]; then + continue + fi + do_test_offloaded $handle $parent \ + $cont $leaf $fifo + done + done + done + + for cont in ets prio; do + for leaf in red tbf; do + do_test_nooffload $handle $parent $cont red tbf $leaf + do_test_nooffload $handle $parent $cont tbf red $leaf + done + for leaf in "red red" "tbf tbf"; do + do_test_nooffload $handle $parent $cont $leaf + done + done + + do_test_nooffload $handle $parent drr +} + +test_root() +{ + do_test_combinations 1 0 +} + +test_port_tbf() +{ + with_tbf 1: root \ + do_test_combinations 8 1 +} + +do_test_etsprio() +{ + local parent=$1; shift + local tbfpfx=$1; shift + local cont + + for cont in ets prio; do + RET=0 + with_$cont 8: "$parent" \ + with_red 11: "parent 8:1" \ + with_red 12: "parent 8:2" \ + with_tbf 13: "parent 8:3" \ + with_tbf 14: "parent 8:4" \ + check_all_offloaded + log_test "root$tbfpfx-ETS-{RED,TBF} offloaded" + + RET=0 + with_$cont 8: "$parent" \ + with_red 81: "parent 8:1" \ + with_tbf 811: "parent 81:1" \ + with_tbf 84: "parent 8:4" \ + with_red 841: "parent 84:1" \ + check_all_offloaded + log_test "root$tbfpfx-ETS-{RED-TBF,TBF-RED} offloaded" + + RET=0 + with_$cont 8: "$parent" \ + with_red 81: "parent 8:1" \ + with_tbf 811: "parent 81:1" \ + with_bfifo 8111: "parent 811:1" \ + with_tbf 82: "parent 8:2" \ + with_red 821: "parent 82:1" \ + with_bfifo 8211: "parent 821:1" \ + check_all_offloaded + log_test "root$tbfpfx-ETS-{RED-TBF-bFIFO,TBF-RED-bFIFO} offloaded" + done +} + +test_etsprio() +{ + do_test_etsprio root "" +} + +test_etsprio_port_tbf() +{ + with_tbf 1: root \ + do_test_etsprio "parent 1:1" "-TBF" +} + +cleanup() +{ + tc qdisc del dev $h1 root &>/dev/null +} + +trap cleanup EXIT +h1=${NETIFS[p1]} +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh new file mode 100644 index 0000000000..299e06a580 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh @@ -0,0 +1,760 @@ +# SPDX-License-Identifier: GPL-2.0 + +# This test sends a >1Gbps stream of traffic from H1, to the switch, which +# forwards it to a 1Gbps port. This 1Gbps stream is then looped back to the +# switch and forwarded to the port under test $swp3, which is also 1Gbps. +# +# This way, $swp3 should be 100% filled with traffic without any of it spilling +# to the backlog. Any extra packets sent should almost 1:1 go to backlog. That +# is what H2 is used for--it sends the extra traffic to create backlog. +# +# A RED Qdisc is installed on $swp3. The configuration is such that the minimum +# and maximum size are 1 byte apart, so there is a very clear border under which +# no marking or dropping takes place, and above which everything is marked or +# dropped. +# +# The test uses the buffer build-up behavior to test the installed RED. +# +# In order to test WRED, $swp3 actually contains RED under PRIO, with two +# different configurations. Traffic is prioritized using 802.1p and relies on +# the implicit mlxsw configuration, where packet priority is taken 1:1 from the +# 802.1p marking. +# +# +--------------------------+ +--------------------------+ +# | H1 | | H2 | +# | + $h1.10 | | + $h2.10 | +# | | 192.0.2.1/28 | | | 192.0.2.2/28 | +# | | | | | | +# | | $h1.11 + | | | $h2.11 + | +# | | 192.0.2.17/28 | | | | 192.0.2.18/28 | | +# | | | | | | | | +# | \______ ______/ | | \______ ______/ | +# | \ / | | \ / | +# | + $h1 | | + $h2 | +# +-------------|------------+ +-------------|------------+ +# | >1Gbps | +# +-------------|------------------------------------------------|------------+ +# | SW + $swp1 + $swp2 | +# | _______/ \___________ ___________/ \_______ | +# | / \ / \ | +# | +-|-----------------+ | +-|-----------------+ | | +# | | + $swp1.10 | | | + $swp2.10 | | | +# | | | | .-------------+ $swp5.10 | | | +# | | BR1_10 | | | | | | | +# | | | | | | BR2_10 | | | +# | | + $swp2.10 | | | | | | | +# | +-|-----------------+ | | | + $swp3.10 | | | +# | | | | +-|-----------------+ | | +# | | +-----------------|-+ | | +-----------------|-+ | +# | | | $swp1.11 + | | | | $swp2.11 + | | +# | | | | | .-----------------+ $swp5.11 | | +# | | | BR1_11 | | | | | | | +# | | | | | | | | BR2_11 | | +# | | | $swp2.11 + | | | | | | | +# | | +-----------------|-+ | | | | $swp3.11 + | | +# | | | | | | +-----------------|-+ | +# | \_______ ___________/ | | \___________ _______/ | +# | \ / \ / \ / | +# | + $swp4 + $swp5 + $swp3 | +# +-------------|----------------------|-------------------------|------------+ +# | | | 1Gbps +# \________1Gbps_________/ | +# +----------------------------|------------+ +# | H3 + $h3 | +# | _____________________/ \_______ | +# | / \ | +# | | | | +# | + $h3.10 $h3.11 + | +# | 192.0.2.3/28 192.0.2.19/28 | +# +-----------------------------------------+ + +NUM_NETIFS=8 +CHECK_TC="yes" +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source mlxsw_lib.sh + +ipaddr() +{ + local host=$1; shift + local vlan=$1; shift + + echo 192.0.2.$((16 * (vlan - 10) + host)) +} + +host_create() +{ + local dev=$1; shift + local host=$1; shift + + simple_if_init $dev + mtu_set $dev 10000 + + vlan_create $dev 10 v$dev $(ipaddr $host 10)/28 + ip link set dev $dev.10 type vlan egress 0:0 + + vlan_create $dev 11 v$dev $(ipaddr $host 11)/28 + ip link set dev $dev.11 type vlan egress 0:1 +} + +host_destroy() +{ + local dev=$1; shift + + vlan_destroy $dev 11 + vlan_destroy $dev 10 + mtu_restore $dev + simple_if_fini $dev +} + +h1_create() +{ + host_create $h1 1 +} + +h1_destroy() +{ + host_destroy $h1 +} + +h2_create() +{ + host_create $h2 2 + tc qdisc add dev $h2 clsact + + # Some of the tests in this suite use multicast traffic. As this traffic + # enters BR2_10 resp. BR2_11, it is flooded to all other ports. Thus + # e.g. traffic ingressing through $swp2 is flooded to $swp3 (the + # intended destination) and $swp5 (which is intended as ingress for + # another stream of traffic). + # + # This is generally not a problem, but if the $swp5 throughput is lower + # than $swp2 throughput, there will be a build-up at $swp5. That may + # cause packets to fail to queue up at $swp3 due to shared buffer + # quotas, and the test to spuriously fail. + # + # Prevent this by adding a shaper which limits the traffic in $h2 to + # 1Gbps. + + tc qdisc replace dev $h2 root handle 10: tbf rate 1gbit \ + burst 128K limit 1G +} + +h2_destroy() +{ + tc qdisc del dev $h2 root handle 10: + tc qdisc del dev $h2 clsact + host_destroy $h2 +} + +h3_create() +{ + host_create $h3 3 +} + +h3_destroy() +{ + host_destroy $h3 +} + +switch_create() +{ + local intf + local vlan + + ip link add dev br1_10 type bridge + ip link add dev br1_11 type bridge + + ip link add dev br2_10 type bridge + ip link add dev br2_11 type bridge + + for intf in $swp1 $swp2 $swp3 $swp4 $swp5; do + ip link set dev $intf up + mtu_set $intf 10000 + done + + for intf in $swp1 $swp4; do + for vlan in 10 11; do + vlan_create $intf $vlan + ip link set dev $intf.$vlan master br1_$vlan + ip link set dev $intf.$vlan up + done + done + + for intf in $swp2 $swp3 $swp5; do + for vlan in 10 11; do + vlan_create $intf $vlan + ip link set dev $intf.$vlan master br2_$vlan + ip link set dev $intf.$vlan up + done + done + + ip link set dev $swp4.10 type vlan egress 0:0 + ip link set dev $swp4.11 type vlan egress 0:1 + for intf in $swp1 $swp2 $swp5; do + for vlan in 10 11; do + ip link set dev $intf.$vlan type vlan ingress 0:0 1:1 + done + done + + for intf in $swp3 $swp4; do + tc qdisc replace dev $intf root handle 1: tbf rate 1gbit \ + burst 128K limit 1G + done + + ip link set dev br1_10 up + ip link set dev br1_11 up + ip link set dev br2_10 up + ip link set dev br2_11 up + + local size=$(devlink_pool_size_thtype 0 | cut -d' ' -f 1) + devlink_port_pool_th_save $swp3 8 + devlink_port_pool_th_set $swp3 8 $size +} + +switch_destroy() +{ + local intf + local vlan + + devlink_port_pool_th_restore $swp3 8 + + ip link set dev br2_11 down + ip link set dev br2_10 down + ip link set dev br1_11 down + ip link set dev br1_10 down + + for intf in $swp4 $swp3; do + tc qdisc del dev $intf root handle 1: + done + + for intf in $swp5 $swp3 $swp2 $swp4 $swp1; do + for vlan in 11 10; do + ip link set dev $intf.$vlan down + ip link set dev $intf.$vlan nomaster + vlan_destroy $intf $vlan + done + + mtu_restore $intf + ip link set dev $intf down + done + + ip link del dev br2_11 + ip link del dev br2_10 + ip link del dev br1_11 + ip link del dev br1_10 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + swp4=${NETIFS[p7]} + swp5=${NETIFS[p8]} + + h3_mac=$(mac_get $h3) + + vrf_prepare + + h1_create + h2_create + h3_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h3_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1.10 $(ipaddr 3 10) " from host 1, vlan 10" + ping_test $h1.11 $(ipaddr 3 11) " from host 1, vlan 11" + ping_test $h2.10 $(ipaddr 3 10) " from host 2, vlan 10" + ping_test $h2.11 $(ipaddr 3 11) " from host 2, vlan 11" +} + +get_tc() +{ + local vlan=$1; shift + + echo $((vlan - 10)) +} + +get_qdisc_handle() +{ + local vlan=$1; shift + + local tc=$(get_tc $vlan) + local band=$((8 - tc)) + + # Handle is 107: for TC1, 108: for TC0. + echo "10$band:" +} + +get_qdisc_backlog() +{ + local vlan=$1; shift + + qdisc_stats_get $swp3 $(get_qdisc_handle $vlan) .backlog +} + +get_mc_transmit_queue() +{ + local vlan=$1; shift + + local tc=$(($(get_tc $vlan) + 8)) + ethtool_stats_get $swp3 tc_transmit_queue_tc_$tc +} + +get_nmarked() +{ + local vlan=$1; shift + + ethtool_stats_get $swp3 ecn_marked +} + +get_qdisc_nmarked() +{ + local vlan=$1; shift + + busywait_for_counter 1100 +1 \ + qdisc_stats_get $swp3 $(get_qdisc_handle $vlan) .marked +} + +get_qdisc_npackets() +{ + local vlan=$1; shift + + busywait_for_counter 1100 +1 \ + qdisc_stats_get $swp3 $(get_qdisc_handle $vlan) .packets +} + +send_packets() +{ + local vlan=$1; shift + local proto=$1; shift + local pkts=$1; shift + + $MZ $h2.$vlan -p 8000 -a own -b $h3_mac \ + -A $(ipaddr 2 $vlan) -B $(ipaddr 3 $vlan) \ + -t $proto -q -c $pkts "$@" +} + +# This sends traffic in an attempt to build a backlog of $size. Returns 0 on +# success. After 10 failed attempts it bails out and returns 1. It dumps the +# backlog size to stdout. +build_backlog() +{ + local vlan=$1; shift + local size=$1; shift + local proto=$1; shift + + local tc=$((vlan - 10)) + local band=$((8 - tc)) + local cur=-1 + local i=0 + + while :; do + local cur=$(busywait 1100 until_counter_is "> $cur" \ + get_qdisc_backlog $vlan) + local diff=$((size - cur)) + local pkts=$(((diff + 7999) / 8000)) + + if ((cur >= size)); then + echo $cur + return 0 + elif ((i++ > 10)); then + echo $cur + return 1 + fi + + send_packets $vlan $proto $pkts "$@" + done +} + +check_marking() +{ + local get_nmarked=$1; shift + local vlan=$1; shift + local cond=$1; shift + + local npackets_0=$(get_qdisc_npackets $vlan) + local nmarked_0=$($get_nmarked $vlan) + sleep 5 + local npackets_1=$(get_qdisc_npackets $vlan) + local nmarked_1=$($get_nmarked $vlan) + + local nmarked_d=$((nmarked_1 - nmarked_0)) + local npackets_d=$((npackets_1 - npackets_0)) + local pct=$((100 * nmarked_d / npackets_d)) + + echo $pct + ((pct $cond)) +} + +ecn_test_common() +{ + local name=$1; shift + local get_nmarked=$1; shift + local vlan=$1; shift + local limit=$1; shift + local backlog + local pct + + # Build the below-the-limit backlog using UDP. We could use TCP just + # fine, but this way we get a proof that UDP is accepted when queue + # length is below the limit. The main stream is using TCP, and if the + # limit is misconfigured, we would see this traffic being ECN marked. + RET=0 + backlog=$(build_backlog $vlan $((2 * limit / 3)) udp) + check_err $? "Could not build the requested backlog" + pct=$(check_marking "$get_nmarked" $vlan "== 0") + check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0." + log_test "TC $((vlan - 10)): $name backlog < limit" + + # Now push TCP, because non-TCP traffic would be early-dropped after the + # backlog crosses the limit, and we want to make sure that the backlog + # is above the limit. + RET=0 + backlog=$(build_backlog $vlan $((3 * limit / 2)) tcp tos=0x01) + check_err $? "Could not build the requested backlog" + pct=$(check_marking "$get_nmarked" $vlan ">= 95") + check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected >= 95." + log_test "TC $((vlan - 10)): $name backlog > limit" +} + +__do_ecn_test() +{ + local get_nmarked=$1; shift + local vlan=$1; shift + local limit=$1; shift + local name=${1-ECN}; shift + + start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) \ + $h3_mac tos=0x01 + sleep 1 + + ecn_test_common "$name" "$get_nmarked" $vlan $limit + + # Up there we saw that UDP gets accepted when backlog is below the + # limit. Now that it is above, it should all get dropped, and backlog + # building should fail. + RET=0 + build_backlog $vlan $((2 * limit)) udp >/dev/null + check_fail $? "UDP traffic went into backlog instead of being early-dropped" + log_test "TC $((vlan - 10)): $name backlog > limit: UDP early-dropped" + + stop_traffic + sleep 1 +} + +do_ecn_test() +{ + local vlan=$1; shift + local limit=$1; shift + + __do_ecn_test get_nmarked "$vlan" "$limit" +} + +do_ecn_test_perband() +{ + local vlan=$1; shift + local limit=$1; shift + + mlxsw_only_on_spectrum 3+ || return + __do_ecn_test get_qdisc_nmarked "$vlan" "$limit" "per-band ECN" +} + +do_ecn_nodrop_test() +{ + local vlan=$1; shift + local limit=$1; shift + local name="ECN nodrop" + + start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) \ + $h3_mac tos=0x01 + sleep 1 + + ecn_test_common "$name" get_nmarked $vlan $limit + + # Up there we saw that UDP gets accepted when backlog is below the + # limit. Now that it is above, in nodrop mode, make sure it goes to + # backlog as well. + RET=0 + build_backlog $vlan $((2 * limit)) udp >/dev/null + check_err $? "UDP traffic was early-dropped instead of getting into backlog" + log_test "TC $((vlan - 10)): $name backlog > limit: UDP not dropped" + + stop_traffic + sleep 1 +} + +do_red_test() +{ + local vlan=$1; shift + local limit=$1; shift + local backlog + local pct + + # Use ECN-capable TCP to verify there's no marking even though the queue + # is above limit. + start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) \ + $h3_mac tos=0x01 + + # Pushing below the queue limit should work. + RET=0 + backlog=$(build_backlog $vlan $((2 * limit / 3)) tcp tos=0x01) + check_err $? "Could not build the requested backlog" + pct=$(check_marking get_nmarked $vlan "== 0") + check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0." + log_test "TC $((vlan - 10)): RED backlog < limit" + + # Pushing above should not. + RET=0 + backlog=$(build_backlog $vlan $((3 * limit / 2)) tcp tos=0x01) + check_fail $? "Traffic went into backlog instead of being early-dropped" + pct=$(check_marking get_nmarked $vlan "== 0") + check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0." + local diff=$((limit - backlog)) + pct=$((100 * diff / limit)) + ((-10 <= pct && pct <= 10)) + check_err $? "backlog $backlog / $limit expected <= 10% distance" + log_test "TC $((vlan - 10)): RED backlog > limit" + + stop_traffic + sleep 1 +} + +do_mc_backlog_test() +{ + local vlan=$1; shift + local limit=$1; shift + local backlog + local pct + + RET=0 + + start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) bc + start_tcp_traffic $h2.$vlan $(ipaddr 2 $vlan) $(ipaddr 3 $vlan) bc + + qbl=$(busywait 5000 until_counter_is ">= 500000" \ + get_qdisc_backlog $vlan) + check_err $? "Could not build MC backlog" + + # Verify that we actually see the backlog on BUM TC. Do a busywait as + # well, performance blips might cause false fail. + local ebl + ebl=$(busywait 5000 until_counter_is ">= 500000" \ + get_mc_transmit_queue $vlan) + check_err $? "MC backlog reported by qdisc not visible in ethtool" + + stop_traffic + stop_traffic + + log_test "TC $((vlan - 10)): Qdisc reports MC backlog" +} + +do_mark_test() +{ + local vlan=$1; shift + local limit=$1; shift + local subtest=$1; shift + local fetch_counter=$1; shift + local should_fail=$1; shift + local base + + mlxsw_only_on_spectrum 2+ || return + + RET=0 + + start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) \ + $h3_mac tos=0x01 + + # Create a bit of a backlog and observe no mirroring due to marks. + qevent_rule_install_$subtest + + build_backlog $vlan $((2 * limit / 3)) tcp tos=0x01 >/dev/null + + base=$($fetch_counter) + count=$(busywait 1100 until_counter_is ">= $((base + 1))" \ + $fetch_counter) + check_fail $? "Spurious packets ($base -> $count) observed without buffer pressure" + + # Above limit, everything should be mirrored, we should see lots of + # packets. + build_backlog $vlan $((3 * limit / 2)) tcp tos=0x01 >/dev/null + busywait_for_counter 1100 +10000 \ + $fetch_counter > /dev/null + check_err_fail "$should_fail" $? "ECN-marked packets $subtest'd" + + # When the rule is uninstalled, there should be no mirroring. + qevent_rule_uninstall_$subtest + busywait_for_counter 1100 +10 \ + $fetch_counter > /dev/null + check_fail $? "Spurious packets observed after uninstall" + + if ((should_fail)); then + log_test "TC $((vlan - 10)): marked packets not $subtest'd" + else + log_test "TC $((vlan - 10)): marked packets $subtest'd" + fi + + stop_traffic + sleep 1 +} + +do_drop_test() +{ + local vlan=$1; shift + local limit=$1; shift + local trigger=$1; shift + local subtest=$1; shift + local fetch_counter=$1; shift + local base + local now + + mlxsw_only_on_spectrum 2+ || return + + RET=0 + + start_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) $h3_mac + + # Create a bit of a backlog and observe no mirroring due to drops. + qevent_rule_install_$subtest + base=$($fetch_counter) + + build_backlog $vlan $((2 * limit / 3)) udp >/dev/null + + busywait 1100 until_counter_is ">= $((base + 1))" $fetch_counter >/dev/null + check_fail $? "Spurious packets observed without buffer pressure" + + # Push to the queue until it's at the limit. The configured limit is + # rounded by the qdisc and then by the driver, so this is the best we + # can do to get to the real limit of the system. + build_backlog $vlan $((3 * limit / 2)) udp >/dev/null + + base=$($fetch_counter) + send_packets $vlan udp 11 + + now=$(busywait 1100 until_counter_is ">= $((base + 10))" $fetch_counter) + check_err $? "Dropped packets not observed: 11 expected, $((now - base)) seen" + + # When no extra traffic is injected, there should be no mirroring. + busywait 1100 until_counter_is ">= $((base + 20))" $fetch_counter >/dev/null + check_fail $? "Spurious packets observed" + + # When the rule is uninstalled, there should be no mirroring. + qevent_rule_uninstall_$subtest + send_packets $vlan udp 11 + busywait 1100 until_counter_is ">= $((base + 20))" $fetch_counter >/dev/null + check_fail $? "Spurious packets observed after uninstall" + + log_test "TC $((vlan - 10)): ${trigger}ped packets $subtest'd" + + stop_traffic + sleep 1 +} + +qevent_rule_install_mirror() +{ + tc filter add block 10 pref 1234 handle 102 matchall skip_sw \ + action mirred egress mirror dev $swp2 hw_stats disabled +} + +qevent_rule_uninstall_mirror() +{ + tc filter del block 10 pref 1234 handle 102 matchall +} + +qevent_counter_fetch_mirror() +{ + tc_rule_handle_stats_get "dev $h2 ingress" 101 +} + +do_drop_mirror_test() +{ + local vlan=$1; shift + local limit=$1; shift + local qevent_name=$1; shift + + tc filter add dev $h2 ingress pref 1 handle 101 prot ip \ + flower skip_sw ip_proto udp \ + action drop + + do_drop_test "$vlan" "$limit" "$qevent_name" mirror \ + qevent_counter_fetch_mirror + + tc filter del dev $h2 ingress pref 1 handle 101 flower +} + +do_mark_mirror_test() +{ + local vlan=$1; shift + local limit=$1; shift + + tc filter add dev $h2 ingress pref 1 handle 101 prot ip \ + flower skip_sw ip_proto tcp \ + action drop + + do_mark_test "$vlan" "$limit" mirror \ + qevent_counter_fetch_mirror \ + $(: should_fail=)0 + + tc filter del dev $h2 ingress pref 1 handle 101 flower +} + +qevent_rule_install_trap() +{ + tc filter add block 10 pref 1234 handle 102 matchall skip_sw \ + action trap hw_stats disabled +} + +qevent_rule_uninstall_trap() +{ + tc filter del block 10 pref 1234 handle 102 matchall +} + +qevent_counter_fetch_trap() +{ + local trap_name=$1; shift + + devlink_trap_rx_packets_get "$trap_name" +} + +do_drop_trap_test() +{ + local vlan=$1; shift + local limit=$1; shift + local trap_name=$1; shift + + do_drop_test "$vlan" "$limit" "$trap_name" trap \ + "qevent_counter_fetch_trap $trap_name" +} + +qevent_rule_install_trap_fwd() +{ + tc filter add block 10 pref 1234 handle 102 matchall skip_sw \ + action trap_fwd hw_stats disabled +} + +qevent_rule_uninstall_trap_fwd() +{ + tc filter del block 10 pref 1234 handle 102 matchall +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_red_ets.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_red_ets.sh new file mode 100755 index 0000000000..8ecddafa79 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_red_ets.sh @@ -0,0 +1,176 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + ping_ipv4 + ecn_test + ecn_test_perband + ecn_nodrop_test + red_test + mc_backlog_test + red_mirror_test + red_trap_test + ecn_mirror_test +" +: ${QDISC:=ets} +source sch_red_core.sh + +# do_ecn_test first build 2/3 of the requested backlog and expects no marking, +# and then builds 3/2 of it and does expect marking. The values of $BACKLOG1 and +# $BACKLOG2 are far enough not to overlap, so that we can assume that if we do +# see (do not see) marking, it is actually due to the configuration of that one +# TC, and not due to configuration of the other TC leaking over. +BACKLOG1=200000 +BACKLOG2=500000 + +install_root_qdisc() +{ + tc qdisc add dev $swp3 parent 1: handle 10: $QDISC \ + bands 8 priomap 7 6 5 4 3 2 1 0 +} + +install_qdisc_tc0() +{ + local -a args=("$@") + + tc qdisc add dev $swp3 parent 10:8 handle 108: red \ + limit 1000000 min $BACKLOG1 max $((BACKLOG1 + 1)) \ + probability 1.0 avpkt 8000 burst 38 "${args[@]}" +} + +install_qdisc_tc1() +{ + local -a args=("$@") + + tc qdisc add dev $swp3 parent 10:7 handle 107: red \ + limit 1000000 min $BACKLOG2 max $((BACKLOG2 + 1)) \ + probability 1.0 avpkt 8000 burst 63 "${args[@]}" +} + +install_qdisc() +{ + install_root_qdisc + install_qdisc_tc0 "$@" + install_qdisc_tc1 "$@" + sleep 1 +} + +uninstall_qdisc_tc0() +{ + tc qdisc del dev $swp3 parent 10:8 +} + +uninstall_qdisc_tc1() +{ + tc qdisc del dev $swp3 parent 10:7 +} + +uninstall_root_qdisc() +{ + tc qdisc del dev $swp3 parent 1: +} + +uninstall_qdisc() +{ + uninstall_qdisc_tc0 + uninstall_qdisc_tc1 + uninstall_root_qdisc +} + +ecn_test() +{ + install_qdisc ecn + + do_ecn_test 10 $BACKLOG1 + do_ecn_test 11 $BACKLOG2 + + uninstall_qdisc +} + +ecn_test_perband() +{ + install_qdisc ecn + + do_ecn_test_perband 10 $BACKLOG1 + do_ecn_test_perband 11 $BACKLOG2 + + uninstall_qdisc +} + +ecn_nodrop_test() +{ + install_qdisc ecn nodrop + + do_ecn_nodrop_test 10 $BACKLOG1 + do_ecn_nodrop_test 11 $BACKLOG2 + + uninstall_qdisc +} + +red_test() +{ + install_qdisc + + # Make sure that we get the non-zero value if there is any. + local cur=$(busywait 1100 until_counter_is "> 0" \ + qdisc_stats_get $swp3 10: .backlog) + (( cur == 0 )) + check_err $? "backlog of $cur observed on non-busy qdisc" + log_test "$QDISC backlog properly cleaned" + + do_red_test 10 $BACKLOG1 + do_red_test 11 $BACKLOG2 + + uninstall_qdisc +} + +mc_backlog_test() +{ + install_qdisc + + # Note that the backlog numbers here do not correspond to RED + # configuration, but are arbitrary. + do_mc_backlog_test 10 $BACKLOG1 + do_mc_backlog_test 11 $BACKLOG2 + + uninstall_qdisc +} + +red_mirror_test() +{ + install_qdisc qevent early_drop block 10 + + do_drop_mirror_test 10 $BACKLOG1 early_drop + do_drop_mirror_test 11 $BACKLOG2 early_drop + + uninstall_qdisc +} + +red_trap_test() +{ + install_qdisc qevent early_drop block 10 + + do_drop_trap_test 10 $BACKLOG1 early_drop + do_drop_trap_test 11 $BACKLOG2 early_drop + + uninstall_qdisc +} + +ecn_mirror_test() +{ + install_qdisc ecn qevent mark block 10 + + do_mark_mirror_test 10 $BACKLOG1 + do_mark_mirror_test 11 $BACKLOG2 + + uninstall_qdisc +} + +bail_on_lldpad "configure DCB" "configure Qdiscs" + +trap cleanup EXIT +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_red_prio.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_red_prio.sh new file mode 100755 index 0000000000..76820a0e9a --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_red_prio.sh @@ -0,0 +1,5 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +QDISC=prio +source sch_red_ets.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_red_root.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_red_root.sh new file mode 100755 index 0000000000..159108d028 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_red_root.sh @@ -0,0 +1,83 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + ping_ipv4 + ecn_test + ecn_test_perband + ecn_nodrop_test + red_test + mc_backlog_test + red_mirror_test +" +source sch_red_core.sh + +BACKLOG=300000 + +install_qdisc() +{ + local -a args=("$@") + + tc qdisc add dev $swp3 parent 1: handle 108: red \ + limit 1000000 min $BACKLOG max $((BACKLOG + 1)) \ + probability 1.0 avpkt 8000 burst 38 "${args[@]}" + sleep 1 +} + +uninstall_qdisc() +{ + tc qdisc del dev $swp3 parent 1: +} + +ecn_test() +{ + install_qdisc ecn + do_ecn_test 10 $BACKLOG + uninstall_qdisc +} + +ecn_test_perband() +{ + install_qdisc ecn + do_ecn_test_perband 10 $BACKLOG + uninstall_qdisc +} + +ecn_nodrop_test() +{ + install_qdisc ecn nodrop + do_ecn_nodrop_test 10 $BACKLOG + uninstall_qdisc +} + +red_test() +{ + install_qdisc + do_red_test 10 $BACKLOG + uninstall_qdisc +} + +mc_backlog_test() +{ + install_qdisc + # Note that the backlog value here does not correspond to RED + # configuration, but is arbitrary. + do_mc_backlog_test 10 $BACKLOG + uninstall_qdisc +} + +red_mirror_test() +{ + install_qdisc qevent early_drop block 10 + do_drop_mirror_test 10 $BACKLOG + uninstall_qdisc +} + +bail_on_lldpad "configure DCB" "configure Qdiscs" + +trap cleanup EXIT +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_ets.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_ets.sh new file mode 100755 index 0000000000..ecc3664376 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_ets.sh @@ -0,0 +1,11 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +sch_tbf_pre_hook() +{ + bail_on_lldpad "configure DCB" "configure Qdiscs" +} + +lib_dir=$(dirname $0)/../../../net/forwarding +TCFLAGS=skip_sw +source $lib_dir/sch_tbf_ets.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_prio.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_prio.sh new file mode 100755 index 0000000000..2e0a4efb17 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_prio.sh @@ -0,0 +1,11 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +sch_tbf_pre_hook() +{ + bail_on_lldpad "configure DCB" "configure Qdiscs" +} + +lib_dir=$(dirname $0)/../../../net/forwarding +TCFLAGS=skip_sw +source $lib_dir/sch_tbf_prio.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_root.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_root.sh new file mode 100755 index 0000000000..6679a338df --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_tbf_root.sh @@ -0,0 +1,11 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +sch_tbf_pre_hook() +{ + bail_on_lldpad "configure DCB" "configure Qdiscs" +} + +lib_dir=$(dirname $0)/../../../net/forwarding +TCFLAGS=skip_sw +source $lib_dir/sch_tbf_root.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer.sh b/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer.sh new file mode 100755 index 0000000000..0c47faff92 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer.sh @@ -0,0 +1,218 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + port_pool_test + port_tc_ip_test + port_tc_arp_test +" + +NUM_NETIFS=2 +source ../../../net/forwarding/lib.sh +source ../../../net/forwarding/devlink_lib.sh +source mlxsw_lib.sh + +SB_POOL_ING=0 +SB_POOL_EGR_CPU=10 + +SB_ITC_CPU_IP=2 +SB_ITC_CPU_ARP=2 +SB_ITC=0 + +h1_create() +{ + simple_if_init $h1 192.0.1.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.1.1/24 +} + +h2_create() +{ + simple_if_init $h2 192.0.1.2/24 +} + +h2_destroy() +{ + simple_if_fini $h2 192.0.1.2/24 +} + +sb_occ_pool_check() +{ + local dl_port=$1; shift + local pool=$1; shift + local exp_max_occ=$1 + local max_occ + local err=0 + + max_occ=$(devlink sb -j occupancy show $dl_port \ + | jq -e ".[][][\"pool\"][\"$pool\"][\"max\"]") + + if [[ "$max_occ" -ne "$exp_max_occ" ]]; then + err=1 + fi + + echo $max_occ + return $err +} + +sb_occ_itc_check() +{ + local dl_port=$1; shift + local itc=$1; shift + local exp_max_occ=$1 + local max_occ + local err=0 + + max_occ=$(devlink sb -j occupancy show $dl_port \ + | jq -e ".[][][\"itc\"][\"$itc\"][\"max\"]") + + if [[ "$max_occ" -ne "$exp_max_occ" ]]; then + err=1 + fi + + echo $max_occ + return $err +} + +sb_occ_etc_check() +{ + local dl_port=$1; shift + local etc=$1; shift + local exp_max_occ=$1; shift + local max_occ + local err=0 + + max_occ=$(devlink sb -j occupancy show $dl_port \ + | jq -e ".[][][\"etc\"][\"$etc\"][\"max\"]") + + if [[ "$max_occ" -ne "$exp_max_occ" ]]; then + err=1 + fi + + echo $max_occ + return $err +} + +port_pool_test() +{ + local exp_max_occ=$(devlink_cell_size_get) + local max_occ + + devlink sb occupancy clearmax $DEVLINK_DEV + + $MZ $h1 -c 1 -p 10 -a $h1mac -b $h2mac -A 192.0.1.1 -B 192.0.1.2 \ + -t ip -q + + devlink sb occupancy snapshot $DEVLINK_DEV + + RET=0 + max_occ=$(sb_occ_pool_check $dl_port1 $SB_POOL_ING $exp_max_occ) + check_err $? "Expected iPool($SB_POOL_ING) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "physical port's($h1) ingress pool" + + RET=0 + max_occ=$(sb_occ_pool_check $dl_port2 $SB_POOL_ING $exp_max_occ) + check_err $? "Expected iPool($SB_POOL_ING) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "physical port's($h2) ingress pool" + + RET=0 + max_occ=$(sb_occ_pool_check $cpu_dl_port $SB_POOL_EGR_CPU $exp_max_occ) + check_err $? "Expected ePool($SB_POOL_EGR_CPU) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "CPU port's egress pool" +} + +port_tc_ip_test() +{ + local exp_max_occ=$(devlink_cell_size_get) + local max_occ + + devlink sb occupancy clearmax $DEVLINK_DEV + + $MZ $h1 -c 1 -p 10 -a $h1mac -b $h2mac -A 192.0.1.1 -B 192.0.1.2 \ + -t ip -q + + devlink sb occupancy snapshot $DEVLINK_DEV + + RET=0 + max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ) + check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "physical port's($h1) ingress TC - IP packet" + + RET=0 + max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ) + check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "physical port's($h2) ingress TC - IP packet" + + RET=0 + max_occ=$(sb_occ_etc_check $cpu_dl_port $SB_ITC_CPU_IP $exp_max_occ) + check_err $? "Expected egress TC($SB_ITC_CPU_IP) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "CPU port's egress TC - IP packet" +} + +port_tc_arp_test() +{ + local exp_max_occ=$(devlink_cell_size_get) + local max_occ + + devlink sb occupancy clearmax $DEVLINK_DEV + + $MZ $h1 -c 1 -p 10 -a $h1mac -A 192.0.1.1 -t arp -q + + devlink sb occupancy snapshot $DEVLINK_DEV + + RET=0 + max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ) + check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "physical port's($h1) ingress TC - ARP packet" + + RET=0 + max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ) + check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "physical port's($h2) ingress TC - ARP packet" + + RET=0 + max_occ=$(sb_occ_etc_check $cpu_dl_port $SB_ITC_CPU_ARP $exp_max_occ) + check_err $? "Expected egress TC($SB_ITC_IP2ME) max occupancy to be $exp_max_occ, but got $max_occ" + log_test "CPU port's egress TC - ARP packet" +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + h1mac=$(mac_get $h1) + h2mac=$(mac_get $h2) + + dl_port1=$(devlink_port_by_netdev $h1) + dl_port2=$(devlink_port_by_netdev $h2) + + cpu_dl_port=$(devlink_cpu_port_get) + + vrf_prepare + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer_configuration.py b/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer_configuration.py new file mode 100755 index 0000000000..2223337eed --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer_configuration.py @@ -0,0 +1,416 @@ +#!/usr/bin/env python +# SPDX-License-Identifier: GPL-2.0 + +import subprocess +import json as j +import random + + +class SkipTest(Exception): + pass + + +class RandomValuePicker: + """ + Class for storing shared buffer configuration. Can handle 3 different + objects, pool, tcbind and portpool. Provide an interface to get random + values for a specific object type as the follow: + 1. Pool: + - random size + + 2. TcBind: + - random pool number + - random threshold + + 3. PortPool: + - random threshold + """ + def __init__(self, pools): + self._pools = [] + for pool in pools: + self._pools.append(pool) + + def _cell_size(self): + return self._pools[0]["cell_size"] + + def _get_static_size(self, th): + # For threshold of 16, this works out to be about 12MB on Spectrum-1, + # and about 17MB on Spectrum-2. + return th * 8000 * self._cell_size() + + def _get_size(self): + return self._get_static_size(16) + + def _get_thtype(self): + return "static" + + def _get_th(self, pool): + # Threshold value could be any integer between 3 to 16 + th = random.randint(3, 16) + if pool["thtype"] == "dynamic": + return th + else: + return self._get_static_size(th) + + def _get_pool(self, direction): + ing_pools = [] + egr_pools = [] + for pool in self._pools: + if pool["type"] == "ingress": + ing_pools.append(pool) + else: + egr_pools.append(pool) + if direction == "ingress": + arr = ing_pools + else: + arr = egr_pools + return arr[random.randint(0, len(arr) - 1)] + + def get_value(self, objid): + if isinstance(objid, Pool): + if objid["pool"] in [4, 8, 9, 10]: + # The threshold type of pools 4, 8, 9 and 10 cannot be changed + raise SkipTest() + else: + return (self._get_size(), self._get_thtype()) + if isinstance(objid, TcBind): + if objid["tc"] >= 8: + # Multicast TCs cannot be changed + raise SkipTest() + else: + pool = self._get_pool(objid["type"]) + th = self._get_th(pool) + pool_n = pool["pool"] + return (pool_n, th) + if isinstance(objid, PortPool): + pool_n = objid["pool"] + pool = self._pools[pool_n] + assert pool["pool"] == pool_n + th = self._get_th(pool) + return (th,) + + +class RecordValuePickerException(Exception): + pass + + +class RecordValuePicker: + """ + Class for storing shared buffer configuration. Can handle 2 different + objects, pool and tcbind. Provide an interface to get the stored values per + object type. + """ + def __init__(self, objlist): + self._recs = [] + for item in objlist: + self._recs.append({"objid": item, "value": item.var_tuple()}) + + def get_value(self, objid): + if isinstance(objid, Pool) and objid["pool"] in [4, 8, 9, 10]: + # The threshold type of pools 4, 8, 9 and 10 cannot be changed + raise SkipTest() + if isinstance(objid, TcBind) and objid["tc"] >= 8: + # Multicast TCs cannot be changed + raise SkipTest() + for rec in self._recs: + if rec["objid"].weak_eq(objid): + return rec["value"] + raise RecordValuePickerException() + + +def run_cmd(cmd, json=False): + out = subprocess.check_output(cmd, shell=True) + if json: + return j.loads(out) + return out + + +def run_json_cmd(cmd): + return run_cmd(cmd, json=True) + + +def log_test(test_name, err_msg=None): + if err_msg: + print("\t%s" % err_msg) + print("TEST: %-80s [FAIL]" % test_name) + else: + print("TEST: %-80s [ OK ]" % test_name) + + +class CommonItem(dict): + varitems = [] + + def var_tuple(self): + ret = [] + self.varitems.sort() + for key in self.varitems: + ret.append(self[key]) + return tuple(ret) + + def weak_eq(self, other): + for key in self: + if key in self.varitems: + continue + if self[key] != other[key]: + return False + return True + + +class CommonList(list): + def get_by(self, by_obj): + for item in self: + if item.weak_eq(by_obj): + return item + return None + + def del_by(self, by_obj): + for item in self: + if item.weak_eq(by_obj): + self.remove(item) + + +class Pool(CommonItem): + varitems = ["size", "thtype"] + + def dl_set(self, dlname, size, thtype): + run_cmd("devlink sb pool set {} sb {} pool {} size {} thtype {}".format(dlname, self["sb"], + self["pool"], + size, thtype)) + + +class PoolList(CommonList): + pass + + +def get_pools(dlname, direction=None): + d = run_json_cmd("devlink sb pool show -j") + pools = PoolList() + for pooldict in d["pool"][dlname]: + if not direction or direction == pooldict["type"]: + pools.append(Pool(pooldict)) + return pools + + +def do_check_pools(dlname, pools, vp): + for pool in pools: + pre_pools = get_pools(dlname) + try: + (size, thtype) = vp.get_value(pool) + except SkipTest: + continue + pool.dl_set(dlname, size, thtype) + post_pools = get_pools(dlname) + pool = post_pools.get_by(pool) + + err_msg = None + if pool["size"] != size: + err_msg = "Incorrect pool size (got {}, expected {})".format(pool["size"], size) + if pool["thtype"] != thtype: + err_msg = "Incorrect pool threshold type (got {}, expected {})".format(pool["thtype"], thtype) + + pre_pools.del_by(pool) + post_pools.del_by(pool) + if pre_pools != post_pools: + err_msg = "Other pool setup changed as well" + log_test("pool {} of sb {} set verification".format(pool["pool"], + pool["sb"]), err_msg) + + +def check_pools(dlname, pools): + # Save defaults + record_vp = RecordValuePicker(pools) + + # For each pool, set random size and static threshold type + do_check_pools(dlname, pools, RandomValuePicker(pools)) + + # Restore defaults + do_check_pools(dlname, pools, record_vp) + + +class TcBind(CommonItem): + varitems = ["pool", "threshold"] + + def __init__(self, port, d): + super(TcBind, self).__init__(d) + self["dlportname"] = port.name + + def dl_set(self, pool, th): + run_cmd("devlink sb tc bind set {} sb {} tc {} type {} pool {} th {}".format(self["dlportname"], + self["sb"], + self["tc"], + self["type"], + pool, th)) + + +class TcBindList(CommonList): + pass + + +def get_tcbinds(ports, verify_existence=False): + d = run_json_cmd("devlink sb tc bind show -j -n") + tcbinds = TcBindList() + for port in ports: + err_msg = None + if port.name not in d["tc_bind"] or len(d["tc_bind"][port.name]) == 0: + err_msg = "No tc bind for port" + else: + for tcbinddict in d["tc_bind"][port.name]: + tcbinds.append(TcBind(port, tcbinddict)) + if verify_existence: + log_test("tc bind existence for port {} verification".format(port.name), err_msg) + return tcbinds + + +def do_check_tcbind(ports, tcbinds, vp): + for tcbind in tcbinds: + pre_tcbinds = get_tcbinds(ports) + try: + (pool, th) = vp.get_value(tcbind) + except SkipTest: + continue + tcbind.dl_set(pool, th) + post_tcbinds = get_tcbinds(ports) + tcbind = post_tcbinds.get_by(tcbind) + + err_msg = None + if tcbind["pool"] != pool: + err_msg = "Incorrect pool (got {}, expected {})".format(tcbind["pool"], pool) + if tcbind["threshold"] != th: + err_msg = "Incorrect threshold (got {}, expected {})".format(tcbind["threshold"], th) + + pre_tcbinds.del_by(tcbind) + post_tcbinds.del_by(tcbind) + if pre_tcbinds != post_tcbinds: + err_msg = "Other tc bind setup changed as well" + log_test("tc bind {}-{} of sb {} set verification".format(tcbind["dlportname"], + tcbind["tc"], + tcbind["sb"]), err_msg) + + +def check_tcbind(dlname, ports, pools): + tcbinds = get_tcbinds(ports, verify_existence=True) + + # Save defaults + record_vp = RecordValuePicker(tcbinds) + + # Bind each port and unicast TC (TCs < 8) to a random pool and a random + # threshold + do_check_tcbind(ports, tcbinds, RandomValuePicker(pools)) + + # Restore defaults + do_check_tcbind(ports, tcbinds, record_vp) + + +class PortPool(CommonItem): + varitems = ["threshold"] + + def __init__(self, port, d): + super(PortPool, self).__init__(d) + self["dlportname"] = port.name + + def dl_set(self, th): + run_cmd("devlink sb port pool set {} sb {} pool {} th {}".format(self["dlportname"], + self["sb"], + self["pool"], th)) + + +class PortPoolList(CommonList): + pass + + +def get_portpools(ports, verify_existence=False): + d = run_json_cmd("devlink sb port pool -j -n") + portpools = PortPoolList() + for port in ports: + err_msg = None + if port.name not in d["port_pool"] or len(d["port_pool"][port.name]) == 0: + err_msg = "No port pool for port" + else: + for portpooldict in d["port_pool"][port.name]: + portpools.append(PortPool(port, portpooldict)) + if verify_existence: + log_test("port pool existence for port {} verification".format(port.name), err_msg) + return portpools + + +def do_check_portpool(ports, portpools, vp): + for portpool in portpools: + pre_portpools = get_portpools(ports) + (th,) = vp.get_value(portpool) + portpool.dl_set(th) + post_portpools = get_portpools(ports) + portpool = post_portpools.get_by(portpool) + + err_msg = None + if portpool["threshold"] != th: + err_msg = "Incorrect threshold (got {}, expected {})".format(portpool["threshold"], th) + + pre_portpools.del_by(portpool) + post_portpools.del_by(portpool) + if pre_portpools != post_portpools: + err_msg = "Other port pool setup changed as well" + log_test("port pool {}-{} of sb {} set verification".format(portpool["dlportname"], + portpool["pool"], + portpool["sb"]), err_msg) + + +def check_portpool(dlname, ports, pools): + portpools = get_portpools(ports, verify_existence=True) + + # Save defaults + record_vp = RecordValuePicker(portpools) + + # For each port pool, set a random threshold + do_check_portpool(ports, portpools, RandomValuePicker(pools)) + + # Restore defaults + do_check_portpool(ports, portpools, record_vp) + + +class Port: + def __init__(self, name): + self.name = name + + +class PortList(list): + pass + + +def get_ports(dlname): + d = run_json_cmd("devlink port show -j") + ports = PortList() + for name in d["port"]: + if name.find(dlname) == 0 and d["port"][name]["flavour"] == "physical": + ports.append(Port(name)) + return ports + + +def get_device(): + devices_info = run_json_cmd("devlink -j dev info")["info"] + for d in devices_info: + if "mlxsw_spectrum" in devices_info[d]["driver"]: + return d + return None + + +class UnavailableDevlinkNameException(Exception): + pass + + +def test_sb_configuration(): + # Use static seed + random.seed(0) + + dlname = get_device() + if not dlname: + raise UnavailableDevlinkNameException() + + ports = get_ports(dlname) + pools = get_pools(dlname) + + check_pools(dlname, pools) + check_tcbind(dlname, ports, pools) + check_portpool(dlname, ports, pools) + + +test_sb_configuration() diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/mirror_gre_scale.sh new file mode 100644 index 0000000000..f7c168decd --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/mirror_gre_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../mirror_gre_scale.sh + +mirror_gre_get_target() +{ + local should_fail=$1; shift + local target + + target=$(devlink_resource_size_get span_agents) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/port_range_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/port_range_scale.sh new file mode 120000 index 0000000000..bd670d9dc4 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/port_range_scale.sh @@ -0,0 +1 @@ +../spectrum/port_range_scale.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/port_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/port_scale.sh new file mode 100644 index 0000000000..0b71dfbbb4 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/port_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../port_scale.sh + +port_get_target() +{ + local should_fail=$1 + local target + + target=$(devlink_resource_size_get physical_ports) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh new file mode 100755 index 0000000000..a88d8a8c85 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh @@ -0,0 +1,80 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh +source ../mlxsw_lib.sh + +mlxsw_only_on_spectrum 2+ || exit 1 + +current_test="" + +cleanup() +{ + pre_cleanup + if [ ! -z $current_test ]; then + ${current_test}_cleanup + fi + # Need to reload in order to avoid router abort. + devlink_reload +} + +trap cleanup EXIT + +ALL_TESTS=" + router + tc_flower + mirror_gre + tc_police + port + rif_mac_profile + rif_counter + port_range +" + +for current_test in ${TESTS:-$ALL_TESTS}; do + RET_FIN=0 + source ${current_test}_scale.sh + + num_netifs_var=${current_test^^}_NUM_NETIFS + num_netifs=${!num_netifs_var:-$NUM_NETIFS} + + for should_fail in 0 1; do + RET=0 + target=$(${current_test}_get_target "$should_fail") + if ((target == 0)); then + log_test_skip "'$current_test' should_fail=$should_fail test" + continue + fi + + ${current_test}_setup_prepare + setup_wait $num_netifs + # Update target in case occupancy of a certain resource changed + # following the test setup. + target=$(${current_test}_get_target "$should_fail") + ${current_test}_test "$target" "$should_fail" + if [[ "$should_fail" -eq 0 ]]; then + log_test "'$current_test' $target" + + if ((!RET)); then + tt=${current_test}_traffic_test + if [[ $(type -t $tt) == "function" ]]; then + $tt "$target" + log_test "'$current_test' $target traffic test" + fi + fi + else + log_test "'$current_test' overflow $target" + fi + ${current_test}_cleanup $target + devlink_reload + RET_FIN=$(( RET_FIN || RET )) + done +done +current_test="" + +exit "$RET_FIN" diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_counter_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_counter_scale.sh new file mode 120000 index 0000000000..1f5752e8ff --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_counter_scale.sh @@ -0,0 +1 @@ +../spectrum/rif_counter_scale.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_mac_profile_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_mac_profile_scale.sh new file mode 100644 index 0000000000..303d7cbe3c --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_mac_profile_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../rif_mac_profile_scale.sh + +rif_mac_profile_get_target() +{ + local should_fail=$1 + local target + + target=$(devlink_resource_size_get rif_mac_profiles) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/router_scale.sh new file mode 100644 index 0000000000..1897e163e3 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/router_scale.sh @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../router_scale.sh + +router_get_target() +{ + local should_fail=$1 + local target + + target=$(devlink_resource_size_get kvd) + + if [[ $should_fail -eq 0 ]]; then + target=$((target * 85 / 100)) + else + target=$((target + 1)) + fi + + echo $target +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh new file mode 100755 index 0000000000..616d358141 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh @@ -0,0 +1,1129 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This test is for checking the A-TCAM and C-TCAM operation in Spectrum-2. +# It tries to exercise as many code paths in the eRP state machine as +# possible. + +lib_dir=$(dirname $0)/../../../../net/forwarding + +ALL_TESTS="single_mask_test identical_filters_test two_masks_test \ + multiple_masks_test ctcam_edge_cases_test delta_simple_test \ + delta_two_masks_one_key_test delta_simple_rehash_test \ + bloom_simple_test bloom_complex_test bloom_delta_test \ + max_erp_entries_test max_group_size_test" +NUM_NETIFS=2 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +tcflags="skip_hw" + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 198.51.100.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 198.51.100.1/24 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 198.51.100.2/24 + tc qdisc add dev $h2 clsact +} + +h2_destroy() +{ + tc qdisc del dev $h2 clsact + simple_if_fini $h2 192.0.2.2/24 198.51.100.2/24 +} + +tp_record() +{ + local tracepoint=$1 + local cmd=$2 + + perf record -q -e $tracepoint $cmd + return $? +} + +tp_record_all() +{ + local tracepoint=$1 + local seconds=$2 + + perf record -a -q -e $tracepoint sleep $seconds + return $? +} + +__tp_hit_count() +{ + local tracepoint=$1 + + local perf_output=`perf script -F trace:event,trace` + return `echo $perf_output | grep "$tracepoint:" | wc -l` +} + +tp_check_hits() +{ + local tracepoint=$1 + local count=$2 + + __tp_hit_count $tracepoint + if [[ "$?" -ne "$count" ]]; then + return 1 + fi + return 0 +} + +tp_check_hits_any() +{ + local tracepoint=$1 + + __tp_hit_count $tracepoint + if [[ "$?" -eq "0" ]]; then + return 1 + fi + return 0 +} + +single_mask_test() +{ + # When only a single mask is required, the device uses the master + # mask and not the eRP table. Verify that under this mode the right + # filter is matched + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Single filter - did not match" + + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 198.51.100.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 2 + check_err $? "Two filters - did not match highest priority" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Two filters - did not match lowest priority" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Single filter - did not match after delete" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "single mask test ($tcflags)" +} + +identical_filters_test() +{ + # When two filters that only differ in their priority are used, + # one needs to be inserted into the C-TCAM. This test verifies + # that filters are correctly spilled to C-TCAM and that the right + # filter is matched + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match A-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match C-TCAM filter after A-TCAM delete" + + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match C-TCAM filter after A-TCAM add" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Did not match A-TCAM filter after C-TCAM delete" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + + log_test "identical filters test ($tcflags)" +} + +two_masks_test() +{ + # When more than one mask is required, the eRP table is used. This + # test verifies that the eRP table is correctly allocated and used + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.0.0/8 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Two filters - did not match highest priority" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Single filter - did not match" + + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.0/24 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Two filters - did not match highest priority after add" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "two masks test ($tcflags)" +} + +multiple_masks_test() +{ + # The number of masks in a region is limited. Once the maximum + # number of masks has been reached filters that require new + # masks are spilled to the C-TCAM. This test verifies that + # spillage is performed correctly and that the right filter is + # matched + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + local index + + RET=0 + + NUM_MASKS=32 + NUM_ERPS=16 + BASE_INDEX=100 + + for i in $(eval echo {1..$NUM_MASKS}); do + index=$((BASE_INDEX - i)) + + if ((i > NUM_ERPS)); then + exp_hits=1 + err_msg="$i filters - C-TCAM spill did not happen when it was expected" + else + exp_hits=0 + err_msg="$i filters - C-TCAM spill happened when it should not" + fi + + tp_record "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" \ + "tc filter add dev $h2 ingress protocol ip pref $index \ + handle $index \ + flower $tcflags \ + dst_ip 192.0.2.2/${i} src_ip 192.0.2.1/${i} \ + action drop" + tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" \ + $exp_hits + check_err $? "$err_msg" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \ + -B 192.0.2.2 -t ip -q + + tc_check_packets "dev $h2 ingress" $index 1 + check_err $? "$i filters - did not match highest priority (add)" + done + + for i in $(eval echo {$NUM_MASKS..1}); do + index=$((BASE_INDEX - i)) + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \ + -B 192.0.2.2 -t ip -q + + tc_check_packets "dev $h2 ingress" $index 2 + check_err $? "$i filters - did not match highest priority (del)" + + tc filter del dev $h2 ingress protocol ip pref $index \ + handle $index flower + done + + log_test "multiple masks test ($tcflags)" +} + +ctcam_two_atcam_masks_test() +{ + RET=0 + + # First case: C-TCAM is disabled when there are two A-TCAM masks. + # We push a filter into the C-TCAM by using two identical filters + # as in identical_filters_test() + + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into C-TCAM + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.0.0/16 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match A-TCAM filter" + + # Delete both A-TCAM and C-TCAM filters and make sure the remaining + # A-TCAM filter still works + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Did not match A-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + + log_test "ctcam with two atcam masks test ($tcflags)" +} + +ctcam_one_atcam_mask_test() +{ + RET=0 + + # Second case: C-TCAM is disabled when there is one A-TCAM mask. + # The test is similar to identical_filters_test() + + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into C-TCAM + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match C-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match A-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "ctcam with one atcam mask test ($tcflags)" +} + +ctcam_no_atcam_masks_test() +{ + RET=0 + + # Third case: C-TCAM is disabled when there are no A-TCAM masks + # This test exercises the code path that transitions the eRP table + # to its initial state after deleting the last C-TCAM mask + + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into C-TCAM + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "ctcam with no atcam masks test ($tcflags)" +} + +ctcam_edge_cases_test() +{ + # When the C-TCAM is disabled after deleting the last C-TCAM + # mask, we want to make sure the eRP state machine is put in + # the correct state + + ctcam_two_atcam_masks_test + ctcam_one_atcam_mask_test + ctcam_no_atcam_masks_test +} + +delta_simple_test() +{ + # The first filter will create eRP, the second filter will fit into + # the first eRP with delta. Remove the first rule then and check that + # the eRP stays (referenced by the second filter). + + RET=0 + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + tp_record "objagg:*" "tc filter add dev $h2 ingress protocol ip \ + pref 1 handle 101 flower $tcflags dst_ip 192.0.0.0/24 \ + action drop" + tp_check_hits "objagg:objagg_obj_root_create" 1 + check_err $? "eRP was not created" + + tp_record "objagg:*" "tc filter add dev $h2 ingress protocol ip \ + pref 2 handle 102 flower $tcflags dst_ip 192.0.2.2 \ + action drop" + tp_check_hits "objagg:objagg_obj_root_create" 0 + check_err $? "eRP was incorrectly created" + tp_check_hits "objagg:objagg_obj_parent_assign" 1 + check_err $? "delta was not created" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tp_record "objagg:*" "tc filter del dev $h2 ingress protocol ip \ + pref 1 handle 101 flower" + tp_check_hits "objagg:objagg_obj_root_destroy" 0 + check_err $? "eRP was incorrectly destroyed" + tp_check_hits "objagg:objagg_obj_parent_unassign" 0 + check_err $? "delta was incorrectly destroyed" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match on correct filter after the first was removed" + + tp_record "objagg:*" "tc filter del dev $h2 ingress protocol ip \ + pref 2 handle 102 flower" + tp_check_hits "objagg:objagg_obj_parent_unassign" 1 + check_err $? "delta was not destroyed" + tp_check_hits "objagg:objagg_obj_root_destroy" 1 + check_err $? "eRP was not destroyed" + + log_test "delta simple test ($tcflags)" +} + +delta_two_masks_one_key_test() +{ + # If 2 keys are the same and only differ in mask in a way that + # they belong under the same ERP (second is delta of the first), + # there should be no C-TCAM spill. + + RET=0 + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + tp_record "mlxsw:*" "tc filter add dev $h2 ingress protocol ip \ + pref 1 handle 101 flower $tcflags dst_ip 192.0.2.0/24 \ + action drop" + tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" 0 + check_err $? "incorrect C-TCAM spill while inserting the first rule" + + tp_record "mlxsw:*" "tc filter add dev $h2 ingress protocol ip \ + pref 2 handle 102 flower $tcflags dst_ip 192.0.2.2 \ + action drop" + tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" 0 + check_err $? "incorrect C-TCAM spill while inserting the second rule" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match on correct filter" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "delta two masks one key test ($tcflags)" +} + +delta_simple_rehash_test() +{ + RET=0 + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 0 + check_err $? "Failed to set ACL region rehash interval" + + tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_fail $? "Rehash trace was hit even when rehash should be disabled" + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 3000 + check_err $? "Failed to set ACL region rehash interval" + + sleep 1 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.1.0/25 action drop + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.3.0/24 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tp_record_all mlxsw:* 3 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_err $? "Rehash trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate + check_err $? "Migrate trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end + check_err $? "Migrate end trace was not hit" + tp_record_all mlxsw:* 3 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_err $? "Rehash trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate + check_fail $? "Migrate trace was hit when no migration should happen" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end + check_fail $? "Migrate end trace was hit when no migration should happen" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match on correct filter after rehash" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + log_test "delta simple rehash test ($tcflags)" +} + +delta_simple_ipv6_rehash_test() +{ + RET=0 + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 0 + check_err $? "Failed to set ACL region rehash interval" + + tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_fail $? "Rehash trace was hit even when rehash should be disabled" + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 3000 + check_err $? "Failed to set ACL region rehash interval" + + sleep 1 + + tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 101 flower \ + $tcflags dst_ip 2001:db8:1::0/121 action drop + tc filter add dev $h2 ingress protocol ipv6 pref 2 handle 102 flower \ + $tcflags dst_ip 2001:db8:2::2 action drop + tc filter add dev $h2 ingress protocol ipv6 pref 3 handle 103 flower \ + $tcflags dst_ip 2001:db8:3::0/120 action drop + + $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ + -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tp_record_all mlxsw:* 3 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_err $? "Rehash trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate + check_err $? "Migrate trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end + check_err $? "Migrate end trace was not hit" + tp_record_all mlxsw:* 3 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_err $? "Rehash trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate + check_fail $? "Migrate trace was hit when no migration should happen" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end + check_fail $? "Migrate end trace was hit when no migration should happen" + + $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ + -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match on correct filter after rehash" + + tc filter del dev $h2 ingress protocol ipv6 pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ipv6 pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 101 flower + + log_test "delta simple IPv6 rehash test ($tcflags)" +} + +TEST_RULE_BASE=256 +declare -a test_rules_inserted + +test_rule_add() +{ + local iface=$1 + local tcflags=$2 + local index=$3 + + if ! [ ${test_rules_inserted[$index]} ] ; then + test_rules_inserted[$index]=false + fi + if ${test_rules_inserted[$index]} ; then + return + fi + + local number=$(( $index + $TEST_RULE_BASE )) + printf -v hexnumber '%x' $number + + batch="${batch}filter add dev $iface ingress protocol ipv6 pref 1 \ + handle $number flower $tcflags \ + src_ip 2001:db8:1::$hexnumber action drop\n" + test_rules_inserted[$index]=true +} + +test_rule_del() +{ + local iface=$1 + local index=$2 + + if ! [ ${test_rules_inserted[$index]} ] ; then + test_rules_inserted[$index]=false + fi + if ! ${test_rules_inserted[$index]} ; then + return + fi + + local number=$(( $index + $TEST_RULE_BASE )) + printf -v hexnumber '%x' $number + + batch="${batch}filter del dev $iface ingress protocol ipv6 pref 1 \ + handle $number flower\n" + test_rules_inserted[$index]=false +} + +test_rule_add_or_remove() +{ + local iface=$1 + local tcflags=$2 + local index=$3 + + if ! [ ${test_rules_inserted[$index]} ] ; then + test_rules_inserted[$index]=false + fi + if ${test_rules_inserted[$index]} ; then + test_rule_del $iface $index + else + test_rule_add $iface $tcflags $index + fi +} + +test_rule_add_or_remove_random_batch() +{ + local iface=$1 + local tcflags=$2 + local total_count=$3 + local skip=0 + local count=0 + local MAXSKIP=20 + local MAXCOUNT=20 + + for ((i=1;i<=total_count;i++)); do + if (( $skip == 0 )) && (($count == 0)); then + ((skip=$RANDOM % $MAXSKIP + 1)) + ((count=$RANDOM % $MAXCOUNT + 1)) + fi + if (( $skip != 0 )); then + ((skip-=1)) + else + ((count-=1)) + test_rule_add_or_remove $iface $tcflags $i + fi + done +} + +delta_massive_ipv6_rehash_test() +{ + RET=0 + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 0 + check_err $? "Failed to set ACL region rehash interval" + + tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_fail $? "Rehash trace was hit even when rehash should be disabled" + + RANDOM=4432897 + declare batch="" + test_rule_add_or_remove_random_batch $h2 $tcflags 5000 + + echo -n -e $batch | tc -b - + + declare batch="" + test_rule_add_or_remove_random_batch $h2 $tcflags 5000 + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 3000 + check_err $? "Failed to set ACL region rehash interval" + + sleep 1 + + tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 101 flower \ + $tcflags dst_ip 2001:db8:1::0/121 action drop + tc filter add dev $h2 ingress protocol ipv6 pref 2 handle 102 flower \ + $tcflags dst_ip 2001:db8:2::2 action drop + tc filter add dev $h2 ingress protocol ipv6 pref 3 handle 103 flower \ + $tcflags dst_ip 2001:db8:3::0/120 action drop + + $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ + -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + echo -n -e $batch | tc -b - + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 0 + check_err $? "Failed to set ACL region rehash interval" + + $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ + -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match on correct filter after rehash" + + tc filter del dev $h2 ingress protocol ipv6 pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ipv6 pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 101 flower + + declare batch="" + for i in {1..5000}; do + test_rule_del $h2 $tcflags $i + done + echo -e $batch | tc -b - + + log_test "delta massive IPv6 rehash test ($tcflags)" +} + +bloom_simple_test() +{ + # Bloom filter requires that the eRP table is used. This test + # verifies that Bloom filter is not harming correctness of ACLs. + # First, make sure that eRP table is used and then set rule patterns + # which are distant enough and will result skipping a lookup after + # consulting the Bloom filter. Although some eRP lookups are skipped, + # the correct filter should be hit. + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + tc filter add dev $h2 ingress protocol ip pref 5 handle 104 flower \ + $tcflags dst_ip 198.51.100.2 action drop + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.0.0/8 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Two filters - did not match highest priority" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 104 1 + check_err $? "Single filter - did not match" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Low prio filter - did not match" + + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 198.0.0.0/8 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Two filters - did not match highest priority after add" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ip pref 5 handle 104 flower + + log_test "bloom simple test ($tcflags)" +} + +bloom_complex_test() +{ + # Bloom filter index computation is affected from region ID, eRP + # ID and from the region key size. In order to excercise those parts + # of the Bloom filter code, use a series of regions, each with a + # different key size and send packet that should hit all of them. + local index + + RET=0 + NUM_CHAINS=4 + BASE_INDEX=100 + + # Create chain with up to 2 key blocks (ip_proto only) + tc chain add dev $h2 ingress chain 1 protocol ip flower \ + ip_proto tcp &> /dev/null + # Create chain with 2-4 key blocks (ip_proto, src MAC) + tc chain add dev $h2 ingress chain 2 protocol ip flower \ + ip_proto tcp \ + src_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF &> /dev/null + # Create chain with 4-8 key blocks (ip_proto, src & dst MAC, IPv4 dest) + tc chain add dev $h2 ingress chain 3 protocol ip flower \ + ip_proto tcp \ + dst_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF \ + src_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF \ + dst_ip 0.0.0.0/32 &> /dev/null + # Default chain contains all fields and therefore is 8-12 key blocks + tc chain add dev $h2 ingress chain 4 + + # We need at least 2 rules in every region to have eRP table active + # so create a dummy rule per chain using a different pattern + for i in $(eval echo {0..$NUM_CHAINS}); do + index=$((BASE_INDEX - 1 - i)) + tc filter add dev $h2 ingress chain $i protocol ip \ + pref 2 handle $index flower \ + $tcflags ip_proto tcp action drop + done + + # Add rules to test Bloom filter, each in a different chain + index=$BASE_INDEX + tc filter add dev $h2 ingress protocol ip \ + pref 1 handle $((++index)) flower \ + $tcflags dst_ip 192.0.0.0/16 action goto chain 1 + tc filter add dev $h2 ingress chain 1 protocol ip \ + pref 1 handle $((++index)) flower \ + $tcflags action goto chain 2 + tc filter add dev $h2 ingress chain 2 protocol ip \ + pref 1 handle $((++index)) flower \ + $tcflags src_mac $h1mac action goto chain 3 + tc filter add dev $h2 ingress chain 3 protocol ip \ + pref 1 handle $((++index)) flower \ + $tcflags dst_ip 192.0.0.0/8 action goto chain 4 + tc filter add dev $h2 ingress chain 4 protocol ip \ + pref 1 handle $((++index)) flower \ + $tcflags src_ip 192.0.2.0/24 action drop + + # Send a packet that is supposed to hit all chains + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + for i in $(eval echo {0..$NUM_CHAINS}); do + index=$((BASE_INDEX + i + 1)) + tc_check_packets "dev $h2 ingress" $index 1 + check_err $? "Did not match chain $i" + done + + # Rules cleanup + for i in $(eval echo {$NUM_CHAINS..0}); do + index=$((BASE_INDEX - i - 1)) + tc filter del dev $h2 ingress chain $i \ + pref 2 handle $index flower + index=$((BASE_INDEX + i + 1)) + tc filter del dev $h2 ingress chain $i \ + pref 1 handle $index flower + done + + # Chains cleanup + for i in $(eval echo {$NUM_CHAINS..1}); do + tc chain del dev $h2 ingress chain $i + done + + log_test "bloom complex test ($tcflags)" +} + + +bloom_delta_test() +{ + # When multiple masks are used, the eRP table is activated. When + # masks are close enough (delta) the masks reside on the same + # eRP table. This test verifies that the eRP table is correctly + # allocated and used in delta condition and that Bloom filter is + # still functional with delta. + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.1.0.0/16 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.1.2.1 -B 192.1.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Single filter - did not match" + + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.2.1.0/24 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.2.1.1 -B 192.2.1.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Delta filters - did not match second filter" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "bloom delta test ($tcflags)" +} + +max_erp_entries_test() +{ + # The number of eRP entries is limited. Once the maximum number of eRPs + # has been reached, filters cannot be added. This test verifies that + # when this limit is reached, inserstion fails without crashing. + + RET=0 + + local num_masks=32 + local num_regions=15 + local chain_failed + local mask_failed + local ret + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + for ((i=1; i < $num_regions; i++)); do + for ((j=$num_masks; j >= 0; j--)); do + tc filter add dev $h2 ingress chain $i protocol ip \ + pref $i handle $j flower $tcflags \ + dst_ip 192.1.0.0/$j &> /dev/null + ret=$? + + if [ $ret -ne 0 ]; then + chain_failed=$i + mask_failed=$j + break 2 + fi + done + done + + # We expect to exceed the maximum number of eRP entries, so that + # insertion eventually fails. Otherwise, the test should be adjusted to + # add more filters. + check_fail $ret "expected to exceed number of eRP entries" + + for ((; i >= 1; i--)); do + for ((j=0; j <= $num_masks; j++)); do + tc filter del dev $h2 ingress chain $i protocol ip \ + pref $i handle $j flower &> /dev/null + done + done + + log_test "max eRP entries test ($tcflags). " \ + "max chain $chain_failed, mask $mask_failed" +} + +max_group_size_test() +{ + # The number of ACLs in an ACL group is limited. Once the maximum + # number of ACLs has been reached, filters cannot be added. This test + # verifies that when this limit is reached, insertion fails without + # crashing. + + RET=0 + + local num_acls=32 + local max_size + local ret + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + for ((i=1; i < $num_acls; i++)); do + if [[ $(( i % 2 )) == 1 ]]; then + tc filter add dev $h2 ingress pref $i proto ipv4 \ + flower $tcflags dst_ip 198.51.100.1/32 \ + ip_proto tcp tcp_flags 0x01/0x01 \ + action drop &> /dev/null + else + tc filter add dev $h2 ingress pref $i proto ipv6 \ + flower $tcflags dst_ip 2001:db8:1::1/128 \ + action drop &> /dev/null + fi + + ret=$? + [[ $ret -ne 0 ]] && max_size=$((i - 1)) && break + done + + # We expect to exceed the maximum number of ACLs in a group, so that + # insertion eventually fails. Otherwise, the test should be adjusted to + # add more filters. + check_fail $ret "expected to exceed number of ACLs in a group" + + for ((; i >= 1; i--)); do + if [[ $(( i % 2 )) == 1 ]]; then + tc filter del dev $h2 ingress pref $i proto ipv4 \ + flower $tcflags dst_ip 198.51.100.1/32 \ + ip_proto tcp tcp_flags 0x01/0x01 \ + action drop &> /dev/null + else + tc filter del dev $h2 ingress pref $i proto ipv6 \ + flower $tcflags dst_ip 2001:db8:1::1/128 \ + action drop &> /dev/null + fi + done + + log_test "max ACL group size test ($tcflags). max size $max_size" +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + h1mac=$(mac_get $h1) + h2mac=$(mac_get $h2) + + vrf_prepare + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +if ! tc_offload_check; then + check_err 1 "Could not test offloaded functionality" + log_test "mlxsw-specific tests for tc flower" + exit +else + tcflags="skip_sw" + tests_run +fi + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower_scale.sh new file mode 100644 index 0000000000..4444bbace1 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower_scale.sh @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../tc_flower_scale.sh + +tc_flower_get_target() +{ + local should_fail=$1; shift + local max_cnts + + # The driver associates a counter with each tc filter, which means the + # number of supported filters is bounded by the number of available + # counters. + max_cnts=$(devlink_resource_size_get counters flow) + + # Remove already allocated counters. + ((max_cnts -= $(devlink_resource_occ_get counters flow))) + + # Each rule uses two counters, for packets and bytes. + ((max_cnts /= 2)) + + if ((! should_fail)); then + echo $max_cnts + else + echo $((max_cnts + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_police_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_police_scale.sh new file mode 100644 index 0000000000..e79ac0dad1 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_police_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../tc_police_scale.sh + +tc_police_get_target() +{ + local should_fail=$1; shift + local target + + target=$(devlink_resource_size_get global_policers single_rate_policers) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/vxlan_flooding_ipv6.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/vxlan_flooding_ipv6.sh new file mode 100755 index 0000000000..fd23c80eba --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/vxlan_flooding_ipv6.sh @@ -0,0 +1,339 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test VxLAN flooding. The device stores flood records in a singly linked list +# where each record stores up to four IPv6 addresses of remote VTEPs. The test +# verifies that packets are correctly flooded in various cases such as deletion +# of a record in the middle of the list. +# +# +-----------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 2001:db8:1::1/64 | +# +----|------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 BR0 (802.1d) | | +# | | | | +# | | + vxlan0 (vxlan) | | +# | | local 2001:db8:2::1 | | +# | | remote 2001:db8:2::{2..17} | | +# | | id 10 dstport 4789 | | +# | +-----------------------------------------------------------------------+ | +# | | +# | 2001:db8:2::0/64 via 2001:db8:3::2 | +# | | +# | + $rp1 | +# | | 2001:db8:3::1/64 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | R2 (vrf) | +# | + $rp2 | +# | 2001:db8:3::2/64 | +# | | +# +-------------------------------------------------------------+ + +lib_dir=$(dirname $0)/../../../../net/forwarding + +ALL_TESTS="flooding_test" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +h1_create() +{ + simple_if_init $h1 2001:db8:1::1/64 +} + +h1_destroy() +{ + simple_if_fini $h1 2001:db8:1::1/64 +} + +switch_create() +{ + # Make sure the bridge uses the MAC address of the local port and + # not that of the VxLAN's device + ip link add dev br0 type bridge mcast_snooping 0 + ip link set dev br0 address $(mac_get $swp1) + + ip link add name vxlan0 type vxlan id 10 nolearning \ + udp6zerocsumrx udp6zerocsumtx ttl 20 tos inherit \ + local 2001:db8:2::1 dstport 4789 + + ip address add 2001:db8:2::1/128 dev lo + + ip link set dev $swp1 master br0 + ip link set dev vxlan0 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev vxlan0 up +} + +switch_destroy() +{ + ip link set dev vxlan0 down + ip link set dev $swp1 down + ip link set dev br0 down + + ip link set dev vxlan0 nomaster + ip link set dev $swp1 nomaster + + ip address del 2001:db8:2::1/128 dev lo + + ip link del dev vxlan0 + + ip link del dev br0 +} + +router1_create() +{ + # This router is in the default VRF, where the VxLAN device is + # performing the L3 lookup + ip link set dev $rp1 up + ip address add 2001:db8:3::1/64 dev $rp1 + ip route add 2001:db8:2::0/64 via 2001:db8:3::2 +} + +router1_destroy() +{ + ip route del 2001:db8:2::0/64 via 2001:db8:3::2 + ip address del 2001:db8:3::1/64 dev $rp1 + ip link set dev $rp1 down +} + +router2_create() +{ + # This router is not in the default VRF, so use simple_if_init() + simple_if_init $rp2 2001:db8:3::2/64 +} + +router2_destroy() +{ + simple_if_fini $rp2 2001:db8:3::2/64 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + + h1_create + + switch_create + + router1_create + router2_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + router2_destroy + router1_destroy + + switch_destroy + + h1_destroy + + vrf_cleanup +} + +flooding_remotes_add() +{ + local num_remotes=$1 + local lsb + local i + + # Prevent unwanted packets from entering the bridge and interfering + # with the test. + tc qdisc add dev br0 clsact + tc filter add dev br0 egress protocol all pref 1 handle 1 \ + matchall skip_hw action drop + tc qdisc add dev $h1 clsact + tc filter add dev $h1 egress protocol all pref 1 handle 1 \ + flower skip_hw dst_mac de:ad:be:ef:13:37 action pass + tc filter add dev $h1 egress protocol all pref 2 handle 2 \ + matchall skip_hw action drop + + for i in $(eval echo {1..$num_remotes}); do + lsb=$((i + 1)) + + bridge fdb append 00:00:00:00:00:00 dev vxlan0 self \ + dst 2001:db8:2::$lsb + done +} + +flooding_filters_add() +{ + local num_remotes=$1 + local lsb + local i + + tc qdisc add dev $rp2 clsact + + for i in $(eval echo {1..$num_remotes}); do + lsb=$((i + 1)) + + tc filter add dev $rp2 ingress protocol ipv6 pref $i handle $i \ + flower ip_proto udp dst_ip 2001:db8:2::$lsb \ + dst_port 4789 skip_sw action drop + done +} + +flooding_filters_del() +{ + local num_remotes=$1 + local i + + for i in $(eval echo {1..$num_remotes}); do + tc filter del dev $rp2 ingress protocol ipv6 pref $i \ + handle $i flower + done + + tc qdisc del dev $rp2 clsact + + tc filter del dev $h1 egress protocol all pref 2 handle 2 matchall + tc filter del dev $h1 egress protocol all pref 1 handle 1 flower + tc qdisc del dev $h1 clsact + tc filter del dev br0 egress protocol all pref 1 handle 1 matchall + tc qdisc del dev br0 clsact +} + +flooding_check_packets() +{ + local packets=("$@") + local num_remotes=${#packets[@]} + local i + + for i in $(eval echo {1..$num_remotes}); do + tc_check_packets "dev $rp2 ingress" $i ${packets[i - 1]} + check_err $? "remote $i - did not get expected number of packets" + done +} + +flooding_test() +{ + # Use 16 remote VTEPs that will be stored in 4 records. The array + # 'packets' will store how many packets are expected to be received + # by each remote VTEP at each stage of the test + declare -a packets=(1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1) + local num_remotes=16 + + RET=0 + + # Add FDB entries for remote VTEPs and corresponding tc filters on the + # ingress of the nexthop router. These filters will count how many + # packets were flooded to each remote VTEP + flooding_remotes_add $num_remotes + flooding_filters_add $num_remotes + + # Send one packet and make sure it is flooded to all the remote VTEPs + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 1 packet" + + # Delete the third record which corresponds to VTEPs with LSB 10..13 + # and check that packet is flooded correctly when we remove a record + # from the middle of the list + RET=0 + + packets=(2 2 2 2 2 2 2 2 1 1 1 1 2 2 2 2) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::10 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::11 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::12 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::13 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 2 packets" + + # Delete the first record and make sure the packet is flooded correctly + RET=0 + + packets=(2 2 2 2 3 3 3 3 1 1 1 1 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::2 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::3 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::4 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::5 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 3 packets" + + # Delete the last record and make sure the packet is flooded correctly + RET=0 + + packets=(2 2 2 2 4 4 4 4 1 1 1 1 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::14 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::15 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::16 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::17 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 4 packets" + + # Delete the last record, one entry at a time and make sure single + # entries are correctly removed + RET=0 + + packets=(2 2 2 2 4 5 5 5 1 1 1 1 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::6 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 5 packets" + + RET=0 + + packets=(2 2 2 2 4 5 6 6 1 1 1 1 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::7 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 6 packets" + + RET=0 + + packets=(2 2 2 2 4 5 6 7 1 1 1 1 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::8 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 7 packets" + + RET=0 + + packets=(2 2 2 2 4 5 6 7 1 1 1 1 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::9 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 8 packets" + + flooding_filters_del $num_remotes +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh new file mode 100644 index 0000000000..06a80f40da --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh @@ -0,0 +1,117 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +source "../../../../net/forwarding/devlink_lib.sh" +source ../mlxsw_lib.sh + +mlxsw_only_on_spectrum 1 || exit 1 + +# Needed for returning to default +declare -A KVD_DEFAULTS + +KVD_CHILDREN="linear hash_single hash_double" +KVDL_CHILDREN="singles chunks large_chunks" + +devlink_sp_resource_minimize() +{ + local size + local i + + for i in $KVD_CHILDREN; do + size=$(devlink_resource_get kvd "$i" | jq '.["size_min"]') + devlink_resource_size_set "$size" kvd "$i" + done + + for i in $KVDL_CHILDREN; do + size=$(devlink_resource_get kvd linear "$i" | \ + jq '.["size_min"]') + devlink_resource_size_set "$size" kvd linear "$i" + done +} + +devlink_sp_size_kvd_to_default() +{ + local need_reload=0 + local i + + for i in $KVD_CHILDREN; do + local size=$(echo "${KVD_DEFAULTS[kvd_$i]}" | jq '.["size"]') + current_size=$(devlink_resource_size_get kvd "$i") + + if [ "$size" -ne "$current_size" ]; then + devlink_resource_size_set "$size" kvd "$i" + need_reload=1 + fi + done + + for i in $KVDL_CHILDREN; do + local size=$(echo "${KVD_DEFAULTS[kvd_linear_$i]}" | \ + jq '.["size"]') + current_size=$(devlink_resource_size_get kvd linear "$i") + + if [ "$size" -ne "$current_size" ]; then + devlink_resource_size_set "$size" kvd linear "$i" + need_reload=1 + fi + done + + if [ "$need_reload" -ne "0" ]; then + devlink_reload + fi +} + +devlink_sp_read_kvd_defaults() +{ + local key + local i + + KVD_DEFAULTS[kvd]=$(devlink_resource_get "kvd") + for i in $KVD_CHILDREN; do + key=kvd_$i + KVD_DEFAULTS[$key]=$(devlink_resource_get kvd "$i") + done + + for i in $KVDL_CHILDREN; do + key=kvd_linear_$i + KVD_DEFAULTS[$key]=$(devlink_resource_get kvd linear "$i") + done +} + +KVD_PROFILES="default scale ipv4_max" + +devlink_sp_resource_kvd_profile_set() +{ + local profile=$1 + + case "$profile" in + scale) + devlink_resource_size_set 64000 kvd linear + devlink_resource_size_set 15616 kvd linear singles + devlink_resource_size_set 32000 kvd linear chunks + devlink_resource_size_set 16384 kvd linear large_chunks + devlink_resource_size_set 128000 kvd hash_single + devlink_resource_size_set 48000 kvd hash_double + devlink_reload + ;; + ipv4_max) + devlink_resource_size_set 64000 kvd linear + devlink_resource_size_set 15616 kvd linear singles + devlink_resource_size_set 32000 kvd linear chunks + devlink_resource_size_set 16384 kvd linear large_chunks + devlink_resource_size_set 144000 kvd hash_single + devlink_resource_size_set 32768 kvd hash_double + devlink_reload + ;; + default) + devlink_resource_size_set 98304 kvd linear + devlink_resource_size_set 16384 kvd linear singles + devlink_resource_size_set 49152 kvd linear chunks + devlink_resource_size_set 32768 kvd linear large_chunks + devlink_resource_size_set 87040 kvd hash_single + devlink_resource_size_set 60416 kvd hash_double + devlink_reload + ;; + *) + check_err 1 "Unknown profile $profile" + esac +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh new file mode 100755 index 0000000000..6f2683cbc7 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh @@ -0,0 +1,120 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../../net/forwarding + +NUM_NETIFS=1 +source $lib_dir/lib.sh +source devlink_lib_spectrum.sh + +setup_prepare() +{ + devlink_sp_read_kvd_defaults +} + +cleanup() +{ + pre_cleanup + devlink_sp_size_kvd_to_default +} + +trap cleanup EXIT + +setup_prepare + +profiles_test() +{ + local i + + log_info "Running profile tests" + + for i in $KVD_PROFILES; do + RET=0 + devlink_sp_resource_kvd_profile_set $i + log_test "'$i' profile" + done + + # Default is explicitly tested at end to ensure it's actually applied + RET=0 + devlink_sp_resource_kvd_profile_set "default" + log_test "'default' profile" +} + +resources_min_test() +{ + local size + local i + local j + + log_info "Running KVD-minimum tests" + + for i in $KVD_CHILDREN; do + RET=0 + size=$(devlink_resource_get kvd "$i" | jq '.["size_min"]') + devlink_resource_size_set "$size" kvd "$i" + + # In case of linear, need to minimize sub-resources as well + if [[ "$i" == "linear" ]]; then + for j in $KVDL_CHILDREN; do + devlink_resource_size_set 0 kvd linear "$j" + done + fi + + devlink_reload + devlink_sp_size_kvd_to_default + log_test "'$i' minimize [$size]" + done +} + +resources_max_test() +{ + local min_size + local size + local i + local j + + log_info "Running KVD-maximum tests" + for i in $KVD_CHILDREN; do + RET=0 + devlink_sp_resource_minimize + + # Calculate the maximum possible size for the given partition + size=$(devlink_resource_size_get kvd) + for j in $KVD_CHILDREN; do + if [ "$i" != "$j" ]; then + min_size=$(devlink_resource_get kvd "$j" | \ + jq '.["size_min"]') + size=$((size - min_size)) + fi + done + + # Test almost maximum size + devlink_resource_size_set "$((size - 128))" kvd "$i" + devlink_reload + log_test "'$i' almost maximize [$((size - 128))]" + + # Test above maximum size + devlink resource set "$DEVLINK_DEV" \ + path "kvd/$i" size $((size + 128)) &> /dev/null + check_fail $? "Set kvd/$i to size $((size + 128)) should fail" + log_test "'$i' Overflow rejection [$((size + 128))]" + + # Test maximum size + if [ "$i" == "hash_single" ] || [ "$i" == "hash_double" ]; then + echo "SKIP: Observed problem with exact max $i" + continue + fi + + devlink_resource_size_set "$size" kvd "$i" + devlink_reload + log_test "'$i' maximize [$size]" + + devlink_sp_size_kvd_to_default + done +} + +profiles_test +resources_min_test +resources_max_test + +exit "$RET" diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh new file mode 100644 index 0000000000..f7c168decd --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../mirror_gre_scale.sh + +mirror_gre_get_target() +{ + local should_fail=$1; shift + local target + + target=$(devlink_resource_size_get span_agents) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/port_range_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/port_range_scale.sh new file mode 100644 index 0000000000..d0847e8ea2 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/port_range_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../port_range_scale.sh + +port_range_get_target() +{ + local should_fail=$1; shift + local target + + target=$(devlink_resource_size_get port_range_registers) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/port_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/port_scale.sh new file mode 100644 index 0000000000..0b71dfbbb4 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/port_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../port_scale.sh + +port_get_target() +{ + local should_fail=$1 + local target + + target=$(devlink_resource_size_get physical_ports) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/q_in_vni_veto.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/q_in_vni_veto.sh new file mode 100755 index 0000000000..60753d46a2 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/q_in_vni_veto.sh @@ -0,0 +1,67 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../../net/forwarding + +VXPORT=4789 + +ALL_TESTS=" + create_vxlan_on_top_of_8021ad_bridge +" +NUM_NETIFS=2 +source $lib_dir/lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +create_vxlan_on_top_of_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 vlan_protocol 802.1ad \ + vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none + ip link set dev br0 up + + ip link add name vx100 type vxlan id 1000 local 192.0.2.17 dstport \ + "$VXPORT" nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx100 up + + ip link set dev $swp1 master br0 + ip link set dev vx100 master br0 + + bridge vlan add vid 100 dev vx100 pvid untagged 2>/dev/null + check_fail $? "802.1ad bridge with VxLAN in Spectrum-1 not rejected" + + bridge vlan add vid 100 dev vx100 pvid untagged 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "802.1ad bridge with VxLAN in Spectrum-1 rejected without extack" + + log_test "create VxLAN on top of 802.1ad bridge" + + ip link del dev vx100 + ip link del dev br0 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh new file mode 100755 index 0000000000..f981c957f0 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh @@ -0,0 +1,85 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source devlink_lib_spectrum.sh + +current_test="" + +cleanup() +{ + pre_cleanup + if [ ! -z $current_test ]; then + ${current_test}_cleanup + fi + devlink_sp_size_kvd_to_default +} + +devlink_sp_read_kvd_defaults +trap cleanup EXIT + +ALL_TESTS=" + router + tc_flower + mirror_gre + tc_police + port + rif_mac_profile + rif_counter + port_range +" + +for current_test in ${TESTS:-$ALL_TESTS}; do + RET_FIN=0 + source ${current_test}_scale.sh + + num_netifs_var=${current_test^^}_NUM_NETIFS + num_netifs=${!num_netifs_var:-$NUM_NETIFS} + + for profile in $KVD_PROFILES; do + RET=0 + devlink_sp_resource_kvd_profile_set $profile + if [[ $RET -gt 0 ]]; then + log_test "'$current_test' [$profile] setting" + continue + fi + + for should_fail in 0 1; do + RET=0 + target=$(${current_test}_get_target "$should_fail") + if ((target == 0)); then + log_test_skip "'$current_test' [$profile] should_fail=$should_fail test" + continue + fi + ${current_test}_setup_prepare + setup_wait $num_netifs + # Update target in case occupancy of a certain resource + # changed following the test setup. + target=$(${current_test}_get_target "$should_fail") + ${current_test}_test "$target" "$should_fail" + if [[ "$should_fail" -eq 0 ]]; then + log_test "'$current_test' [$profile] $target" + + if ((!RET)); then + tt=${current_test}_traffic_test + if [[ $(type -t $tt) == "function" ]] + then + $tt "$target" + log_test "'$current_test' [$profile] $target traffic test" + fi + fi + else + log_test "'$current_test' [$profile] overflow $target" + fi + ${current_test}_cleanup $target + RET_FIN=$(( RET_FIN || RET )) + done + done +done +current_test="" + +exit "$RET_FIN" diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/rif_counter_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/rif_counter_scale.sh new file mode 100644 index 0000000000..d44536276e --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/rif_counter_scale.sh @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../rif_counter_scale.sh + +rif_counter_get_target() +{ + local should_fail=$1; shift + local max_cnts + local max_rifs + local target + + max_rifs=$(devlink_resource_size_get rifs) + max_cnts=$(devlink_resource_size_get counters rif) + + # Remove already allocated RIFs. + ((max_rifs -= $(devlink_resource_occ_get rifs))) + + # 10 KVD slots per counter, ingress+egress counters per RIF + ((max_cnts /= 20)) + + # Pointless to run the overflow test if we don't have enough RIFs to + # host all the counters. + if ((max_cnts > max_rifs && should_fail)); then + echo 0 + return + fi + + target=$((max_rifs < max_cnts ? max_rifs : max_cnts)) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/rif_mac_profile_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/rif_mac_profile_scale.sh new file mode 100644 index 0000000000..303d7cbe3c --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/rif_mac_profile_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../rif_mac_profile_scale.sh + +rif_mac_profile_get_target() +{ + local should_fail=$1 + local target + + target=$(devlink_resource_size_get rif_mac_profiles) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh new file mode 100644 index 0000000000..21c4697d5b --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../router_scale.sh + +router_get_target() +{ + local should_fail=$1 + local target + + target=$(devlink_resource_size_get kvd hash_single) + + if [[ $should_fail -eq 0 ]]; then + target=$((target * 85 / 100)) + else + target=$((target + 1)) + fi + + echo $target +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh new file mode 100644 index 0000000000..f9bfd89377 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../tc_flower_scale.sh + +tc_flower_get_target() +{ + local should_fail=$1; shift + + # 6144 (6x1024) is the theoretical maximum. + # One bank of 512 rules is taken by the 18-byte MC router rule. + # One rule is the ACL catch-all. + # 6144 - 512 - 1 = 5631 + local target=5631 + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_police_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_police_scale.sh new file mode 100644 index 0000000000..e79ac0dad1 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_police_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../tc_police_scale.sh + +tc_police_get_target() +{ + local should_fail=$1; shift + local target + + target=$(devlink_resource_size_get global_policers single_rate_policers) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/vxlan_flooding_ipv6.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/vxlan_flooding_ipv6.sh new file mode 100755 index 0000000000..d8fd875ad5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/vxlan_flooding_ipv6.sh @@ -0,0 +1,334 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test VxLAN flooding. The device stores flood records in a singly linked list +# where each record stores up to five IPv6 addresses of remote VTEPs. The test +# verifies that packets are correctly flooded in various cases such as deletion +# of a record in the middle of the list. +# +# +-----------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 2001:db8:1::1/64 | +# +----|------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 BR0 (802.1d) | | +# | | | | +# | | + vxlan0 (vxlan) | | +# | | local 2001:db8:2::1 | | +# | | remote 2001:db8:2::{2..21} | | +# | | id 10 dstport 4789 | | +# | +-----------------------------------------------------------------------+ | +# | | +# | 2001:db8:2::0/64 via 2001:db8:3::2 | +# | | +# | + $rp1 | +# | | 2001:db8:3::1/64 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | R2 (vrf) | +# | + $rp2 | +# | 2001:db8:3::2/64 | +# | | +# +-------------------------------------------------------------+ + +lib_dir=$(dirname $0)/../../../../net/forwarding + +ALL_TESTS="flooding_test" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +h1_create() +{ + simple_if_init $h1 2001:db8:1::1/64 +} + +h1_destroy() +{ + simple_if_fini $h1 2001:db8:1::1/64 +} + +switch_create() +{ + # Make sure the bridge uses the MAC address of the local port and + # not that of the VxLAN's device + ip link add dev br0 type bridge mcast_snooping 0 + ip link set dev br0 address $(mac_get $swp1) + + ip link add name vxlan0 type vxlan id 10 nolearning \ + udp6zerocsumrx udp6zerocsumtx ttl 20 tos inherit \ + local 2001:db8:2::1 dstport 4789 + + ip address add 2001:db8:2::1/128 dev lo + + ip link set dev $swp1 master br0 + ip link set dev vxlan0 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev vxlan0 up +} + +switch_destroy() +{ + ip link set dev vxlan0 down + ip link set dev $swp1 down + ip link set dev br0 down + + ip link set dev vxlan0 nomaster + ip link set dev $swp1 nomaster + + ip address del 2001:db8:2::1/128 dev lo + + ip link del dev vxlan0 + + ip link del dev br0 +} + +router1_create() +{ + # This router is in the default VRF, where the VxLAN device is + # performing the L3 lookup + ip link set dev $rp1 up + ip address add 2001:db8:3::1/64 dev $rp1 + ip route add 2001:db8:2::0/64 via 2001:db8:3::2 +} + +router1_destroy() +{ + ip route del 2001:db8:2::0/64 via 2001:db8:3::2 + ip address del 2001:db8:3::1/64 dev $rp1 + ip link set dev $rp1 down +} + +router2_create() +{ + # This router is not in the default VRF, so use simple_if_init() + simple_if_init $rp2 2001:db8:3::2/64 +} + +router2_destroy() +{ + simple_if_fini $rp2 2001:db8:3::2/64 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + + h1_create + + switch_create + + router1_create + router2_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + router2_destroy + router1_destroy + + switch_destroy + + h1_destroy + + vrf_cleanup +} + +flooding_remotes_add() +{ + local num_remotes=$1 + local lsb + local i + + for i in $(eval echo {1..$num_remotes}); do + lsb=$((i + 1)) + + bridge fdb append 00:00:00:00:00:00 dev vxlan0 self \ + dst 2001:db8:2::$lsb + done +} + +flooding_filters_add() +{ + local num_remotes=$1 + local lsb + local i + + tc qdisc add dev $rp2 clsact + + for i in $(eval echo {1..$num_remotes}); do + lsb=$((i + 1)) + + tc filter add dev $rp2 ingress protocol ipv6 pref $i handle $i \ + flower ip_proto udp dst_ip 2001:db8:2::$lsb \ + dst_port 4789 skip_sw action drop + done +} + +flooding_filters_del() +{ + local num_remotes=$1 + local i + + for i in $(eval echo {1..$num_remotes}); do + tc filter del dev $rp2 ingress protocol ipv6 pref $i \ + handle $i flower + done + + tc qdisc del dev $rp2 clsact +} + +flooding_check_packets() +{ + local packets=("$@") + local num_remotes=${#packets[@]} + local i + + for i in $(eval echo {1..$num_remotes}); do + tc_check_packets "dev $rp2 ingress" $i ${packets[i - 1]} + check_err $? "remote $i - did not get expected number of packets" + done +} + +flooding_test() +{ + # Use 20 remote VTEPs that will be stored in 4 records. The array + # 'packets' will store how many packets are expected to be received + # by each remote VTEP at each stage of the test + declare -a packets=(1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1) + local num_remotes=20 + + RET=0 + + # Add FDB entries for remote VTEPs and corresponding tc filters on the + # ingress of the nexthop router. These filters will count how many + # packets were flooded to each remote VTEP + flooding_remotes_add $num_remotes + flooding_filters_add $num_remotes + + # Send one packet and make sure it is flooded to all the remote VTEPs + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 1 packet" + + # Delete the third record which corresponds to VTEPs with LSB 12..16 + # and check that packet is flooded correctly when we remove a record + # from the middle of the list + RET=0 + + packets=(2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 2 2 2 2 2) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::12 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::13 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::14 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::15 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::16 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 2 packets" + + # Delete the first record and make sure the packet is flooded correctly + RET=0 + + packets=(2 2 2 2 2 3 3 3 3 3 1 1 1 1 1 3 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::2 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::3 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::4 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::5 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::6 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 3 packets" + + # Delete the last record and make sure the packet is flooded correctly + RET=0 + + packets=(2 2 2 2 2 4 4 4 4 4 1 1 1 1 1 3 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::17 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::18 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::19 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::20 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::21 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 4 packets" + + # Delete the last record, one entry at a time and make sure single + # entries are correctly removed + RET=0 + + packets=(2 2 2 2 2 4 5 5 5 5 1 1 1 1 1 3 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::7 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 5 packets" + + RET=0 + + packets=(2 2 2 2 2 4 5 6 6 6 1 1 1 1 1 3 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::8 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 6 packets" + + RET=0 + + packets=(2 2 2 2 2 4 5 6 7 7 1 1 1 1 1 3 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::9 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 7 packets" + + RET=0 + + packets=(2 2 2 2 2 4 5 6 7 8 1 1 1 1 1 3 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::10 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 8 packets" + + RET=0 + + packets=(2 2 2 2 2 4 5 6 7 8 1 1 1 1 1 3 3 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::11 + + $MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 9 packets" + + flooding_filters_del $num_remotes +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_action_hw_stats.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_action_hw_stats.sh new file mode 100755 index 0000000000..20ed98fe5a --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_action_hw_stats.sh @@ -0,0 +1,130 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + default_hw_stats_test + immediate_hw_stats_test + delayed_hw_stats_test + disabled_hw_stats_test +" +NUM_NETIFS=2 + +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 +} + +switch_create() +{ + simple_if_init $swp1 192.0.2.2/24 + tc qdisc add dev $swp1 clsact +} + +switch_destroy() +{ + tc qdisc del dev $swp1 clsact + simple_if_fini $swp1 192.0.2.2/24 +} + +hw_stats_test() +{ + RET=0 + + local name=$1 + local action_hw_stats=$2 + local occ_delta=$3 + local expected_packet_count=$4 + + local orig_occ=$(devlink_resource_get "counters" "flow" | jq '.["occ"]') + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop $action_hw_stats + check_err $? "Failed to add rule with $name hw_stats" + + local new_occ=$(devlink_resource_get "counters" "flow" | jq '.["occ"]') + local expected_occ=$((orig_occ + occ_delta)) + [ "$new_occ" == "$expected_occ" ] + check_err $? "Expected occupancy of $expected_occ, got $new_occ" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $swp1mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $swp1 ingress" 101 $expected_packet_count + check_err $? "Did not match incoming packet" + + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + log_test "$name hw_stats" +} + +default_hw_stats_test() +{ + hw_stats_test "default" "" 2 1 +} + +immediate_hw_stats_test() +{ + hw_stats_test "immediate" "hw_stats immediate" 2 1 +} + +delayed_hw_stats_test() +{ + RET=0 + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop hw_stats delayed + check_fail $? "Unexpected success in adding rule with delayed hw_stats" + + log_test "delayed hw_stats" +} + +disabled_hw_stats_test() +{ + hw_stats_test "disabled" "hw_stats disabled" 0 0 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + h1mac=$(mac_get $h1) + swp1mac=$(mac_get $swp1) + + vrf_prepare + + h1_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h1_destroy + + vrf_cleanup +} + +check_tc_action_hw_stats_support + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh new file mode 100644 index 0000000000..d3d9e60d6d --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh @@ -0,0 +1,140 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for resource limit of offloaded flower rules. The test adds a given +# number of flower matches for different IPv6 addresses, then check the offload +# indication for all of the tc flower rules. This file contains functions to set +# up a testing topology and run the test, and is meant to be sourced from a test +# script that calls the testing routine with a given number of rules. + +TC_FLOWER_NUM_NETIFS=2 + +tc_flower_h1_create() +{ + simple_if_init $h1 + tc qdisc add dev $h1 clsact +} + +tc_flower_h1_destroy() +{ + tc qdisc del dev $h1 clsact + simple_if_fini $h1 +} + +tc_flower_h2_create() +{ + simple_if_init $h2 + tc qdisc add dev $h2 clsact +} + +tc_flower_h2_destroy() +{ + tc qdisc del dev $h2 clsact + simple_if_fini $h2 +} + +tc_flower_setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + vrf_prepare + + tc_flower_h1_create + tc_flower_h2_create +} + +tc_flower_cleanup() +{ + pre_cleanup + + tc_flower_h2_destroy + tc_flower_h1_destroy + + vrf_cleanup + + if [[ -v TC_FLOWER_BATCH_FILE ]]; then + rm -f $TC_FLOWER_BATCH_FILE + fi +} + +tc_flower_addr() +{ + local num=$1; shift + + printf "2001:db8:1::%x" $num +} + +tc_flower_rules_create() +{ + local count=$1; shift + local should_fail=$1; shift + + TC_FLOWER_BATCH_FILE="$(mktemp)" + + for ((i = 0; i < count; ++i)); do + cat >> $TC_FLOWER_BATCH_FILE <<-EOF + filter add dev $h2 ingress \ + prot ipv6 \ + pref 1000 \ + handle 42$i \ + flower $tcflags dst_ip $(tc_flower_addr $i) \ + action drop + EOF + done + + tc -b $TC_FLOWER_BATCH_FILE + check_err_fail $should_fail $? "Rule insertion" +} + +__tc_flower_test() +{ + local count=$1; shift + local should_fail=$1; shift + local last=$((count - 1)) + + tc_flower_rules_create $count $should_fail + + offload_count=$(tc -j -s filter show dev $h2 ingress | + jq -r '[ .[] | select(.kind == "flower") | + .options | .in_hw ]' | jq .[] | wc -l) + [[ $((offload_count - 1)) -eq $count ]] + check_err_fail $should_fail $? "Attempt to offload $count rules (actual result $((offload_count - 1)))" +} + +tc_flower_test() +{ + local count=$1; shift + local should_fail=$1; shift + + # We use lower 16 bits of IPv6 address for match. Also there are only 16 + # bits of rule priority space. + if ((count > 65536)); then + check_err 1 "Invalid count of $count. At most 65536 rules supported" + return + fi + + if ! tc_offload_check $TC_FLOWER_NUM_NETIFS; then + check_err 1 "Could not test offloaded functionality" + return + fi + + tcflags="skip_sw" + __tc_flower_test $count $should_fail +} + +tc_flower_traffic_test() +{ + local count=$1; shift + local i; + + for ((i = count - 1; i > 0; i /= 2)); do + $MZ -6 $h1 -c 1 -d 20msec -p 100 -a own -b $(mac_get $h2) \ + -A $(tc_flower_addr 0) -B $(tc_flower_addr $i) \ + -q -t udp sp=54321,dp=12345 + done + for ((i = count - 1; i > 0; i /= 2)); do + tc_check_packets "dev $h2 ingress" 42$i 1 + check_err $? "Traffic not seen at rule #$i" + done +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_police_occ.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_police_occ.sh new file mode 100755 index 0000000000..448b75c154 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_police_occ.sh @@ -0,0 +1,108 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test that policers shared by different tc filters are correctly reference +# counted by observing policers' occupancy via devlink-resource. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + tc_police_occ_test +" +NUM_NETIFS=2 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 +} + +h1_destroy() +{ + simple_if_fini $h1 +} + +switch_create() +{ + simple_if_init $swp1 + tc qdisc add dev $swp1 clsact +} + +switch_destroy() +{ + tc qdisc del dev $swp1 clsact + simple_if_fini $swp1 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + vrf_prepare + + h1_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h1_destroy + + vrf_cleanup +} + +tc_police_occ_get() +{ + devlink_resource_occ_get global_policers single_rate_policers +} + +tc_police_occ_test() +{ + RET=0 + + local occ=$(tc_police_occ_get) + + tc filter add dev $swp1 ingress pref 1 handle 101 proto ip \ + flower skip_sw \ + action police rate 100mbit burst 100k conform-exceed drop/ok + (( occ + 1 == $(tc_police_occ_get) )) + check_err $? "Got occupancy $(tc_police_occ_get), expected $((occ + 1))" + + tc filter del dev $swp1 ingress pref 1 handle 101 flower + (( occ == $(tc_police_occ_get) )) + check_err $? "Got occupancy $(tc_police_occ_get), expected $occ" + + tc filter add dev $swp1 ingress pref 1 handle 101 proto ip \ + flower skip_sw \ + action police rate 100mbit burst 100k conform-exceed drop/ok \ + index 10 + tc filter add dev $swp1 ingress pref 2 handle 102 proto ip \ + flower skip_sw action police index 10 + + (( occ + 1 == $(tc_police_occ_get) )) + check_err $? "Got occupancy $(tc_police_occ_get), expected $((occ + 1))" + + tc filter del dev $swp1 ingress pref 2 handle 102 flower + (( occ + 1 == $(tc_police_occ_get) )) + check_err $? "Got occupancy $(tc_police_occ_get), expected $((occ + 1))" + + tc filter del dev $swp1 ingress pref 1 handle 101 flower + (( occ == $(tc_police_occ_get) )) + check_err $? "Got occupancy $(tc_police_occ_get), expected $occ" + + log_test "tc police occupancy" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_police_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_police_scale.sh new file mode 100644 index 0000000000..86e787895f --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_police_scale.sh @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0 + +TC_POLICE_NUM_NETIFS=2 + +tc_police_h1_create() +{ + simple_if_init $h1 +} + +tc_police_h1_destroy() +{ + simple_if_fini $h1 +} + +tc_police_switch_create() +{ + simple_if_init $swp1 + tc qdisc add dev $swp1 clsact +} + +tc_police_switch_destroy() +{ + tc qdisc del dev $swp1 clsact + simple_if_fini $swp1 +} + +tc_police_addr() +{ + local num=$1; shift + + printf "2001:db8:1::%x" $num +} + +tc_police_rules_create() +{ + local count=$1; shift + local should_fail=$1; shift + + TC_POLICE_BATCH_FILE="$(mktemp)" + + for ((i = 0; i < count; ++i)); do + cat >> $TC_POLICE_BATCH_FILE <<-EOF + filter add dev $swp1 ingress \ + prot ipv6 \ + pref 1000 \ + flower skip_sw dst_ip $(tc_police_addr $i) \ + action police rate 10mbit burst 100k \ + conform-exceed drop/ok + EOF + done + + tc -b $TC_POLICE_BATCH_FILE + check_err_fail $should_fail $? "Rule insertion" +} + +__tc_police_test() +{ + local count=$1; shift + local should_fail=$1; shift + + tc_police_rules_create $count $should_fail + + offload_count=$(tc -j filter show dev $swp1 ingress | + jq "[.[] | select(.options.in_hw == true)] | length") + ((offload_count == count)) + check_err_fail $should_fail $? "tc police offload count" +} + +tc_police_test() +{ + local count=$1; shift + local should_fail=$1; shift + + if ! tc_offload_check $TC_POLICE_NUM_NETIFS; then + check_err 1 "Could not test offloaded functionality" + return + fi + + __tc_police_test $count $should_fail +} + +tc_police_setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + vrf_prepare + + tc_police_h1_create + tc_police_switch_create +} + +tc_police_cleanup() +{ + pre_cleanup + + tc_police_switch_destroy + tc_police_h1_destroy + + vrf_cleanup +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_restrictions.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_restrictions.sh new file mode 100755 index 0000000000..0441a18f09 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_restrictions.sh @@ -0,0 +1,414 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + shared_block_drop_test + egress_redirect_test + multi_mirror_test + matchall_sample_egress_test + matchall_mirror_behind_flower_ingress_test + matchall_sample_behind_flower_ingress_test + matchall_mirror_behind_flower_egress_test + matchall_proto_match_test + police_limits_test + multi_police_test +" +NUM_NETIFS=2 + +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source mlxsw_lib.sh + +switch_create() +{ + simple_if_init $swp1 192.0.2.1/24 + simple_if_init $swp2 192.0.2.2/24 +} + +switch_destroy() +{ + simple_if_fini $swp2 192.0.2.2/24 + simple_if_fini $swp1 192.0.2.1/24 +} + +shared_block_drop_test() +{ + RET=0 + + # It is forbidden in mlxsw driver to have mixed-bound + # shared block with a drop rule. + + tc qdisc add dev $swp1 ingress_block 22 clsact + check_err $? "Failed to create clsact with ingress block" + + tc filter add block 22 protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + check_err $? "Failed to add drop rule to ingress bound block" + + tc qdisc add dev $swp2 ingress_block 22 clsact + check_err $? "Failed to create another clsact with ingress shared block" + + tc qdisc del dev $swp2 clsact + + tc qdisc add dev $swp2 egress_block 22 clsact + check_fail $? "Incorrect success to create another clsact with egress shared block" + + tc filter del block 22 protocol ip pref 1 handle 101 flower + + tc qdisc add dev $swp2 egress_block 22 clsact + check_err $? "Failed to create another clsact with egress shared block after blocker drop rule removed" + + tc filter add block 22 protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + check_fail $? "Incorrect success to add drop rule to mixed bound block" + + tc qdisc del dev $swp1 clsact + + tc qdisc add dev $swp1 egress_block 22 clsact + check_err $? "Failed to create another clsact with egress shared block" + + tc filter add block 22 protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + check_err $? "Failed to add drop rule to egress bound shared block" + + tc filter del block 22 protocol ip pref 1 handle 101 flower + + tc qdisc del dev $swp2 clsact + tc qdisc del dev $swp1 clsact + + log_test "shared block drop" +} + +egress_redirect_test() +{ + RET=0 + + # It is forbidden in mlxsw driver to have mirred redirect on + # egress-bound block. + + tc qdisc add dev $swp1 ingress_block 22 clsact + check_err $? "Failed to create clsact with ingress block" + + tc filter add block 22 protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 \ + action mirred egress redirect dev $swp2 + check_err $? "Failed to add redirect rule to ingress bound block" + + tc qdisc add dev $swp2 ingress_block 22 clsact + check_err $? "Failed to create another clsact with ingress shared block" + + tc qdisc del dev $swp2 clsact + + tc qdisc add dev $swp2 egress_block 22 clsact + check_fail $? "Incorrect success to create another clsact with egress shared block" + + tc filter del block 22 protocol ip pref 1 handle 101 flower + + tc qdisc add dev $swp2 egress_block 22 clsact + check_err $? "Failed to create another clsact with egress shared block after blocker redirect rule removed" + + tc filter add block 22 protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 \ + action mirred egress redirect dev $swp2 + check_fail $? "Incorrect success to add redirect rule to mixed bound block" + + tc qdisc del dev $swp1 clsact + + tc qdisc add dev $swp1 egress_block 22 clsact + check_err $? "Failed to create another clsact with egress shared block" + + tc filter add block 22 protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 \ + action mirred egress redirect dev $swp2 + check_fail $? "Incorrect success to add redirect rule to egress bound shared block" + + tc qdisc del dev $swp2 clsact + + tc filter add block 22 protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 \ + action mirred egress redirect dev $swp2 + check_fail $? "Incorrect success to add redirect rule to egress bound block" + + tc qdisc del dev $swp1 clsact + + log_test "shared block drop" +} + +multi_mirror_test() +{ + RET=0 + + # It is forbidden in mlxsw driver to have multiple mirror + # actions in a single rule. + + tc qdisc add dev $swp1 clsact + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 \ + action mirred egress mirror dev $swp2 + check_err $? "Failed to add rule with single mirror action" + + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 \ + action mirred egress mirror dev $swp2 \ + action mirred egress mirror dev $swp1 + check_fail $? "Incorrect success to add rule with two mirror actions" + + tc qdisc del dev $swp1 clsact + + log_test "multi mirror" +} + +matchall_sample_egress_test() +{ + RET=0 + + # It is forbidden in mlxsw driver to have matchall with sample action + # bound on egress. Spectrum-1 specific restriction + mlxsw_only_on_spectrum 1 || return + + tc qdisc add dev $swp1 clsact + + tc filter add dev $swp1 ingress protocol all pref 1 handle 101 \ + matchall skip_sw action sample rate 100 group 1 + check_err $? "Failed to add rule with sample action on ingress" + + tc filter del dev $swp1 ingress protocol all pref 1 handle 101 matchall + + tc filter add dev $swp1 egress protocol all pref 1 handle 101 \ + matchall skip_sw action sample rate 100 group 1 + check_fail $? "Incorrect success to add rule with sample action on egress" + + tc qdisc del dev $swp1 clsact + + log_test "matchall sample egress" +} + +matchall_behind_flower_ingress_test() +{ + local action=$1 + local action_args=$2 + + RET=0 + + # On ingress, all matchall-mirror and matchall-sample + # rules have to be in front of the flower rules + + tc qdisc add dev $swp1 clsact + + tc filter add dev $swp1 ingress protocol ip pref 10 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + + tc filter add dev $swp1 ingress protocol all pref 9 handle 102 \ + matchall skip_sw action $action_args + check_err $? "Failed to add matchall rule in front of a flower rule" + + tc filter del dev $swp1 ingress protocol all pref 9 handle 102 matchall + + tc filter add dev $swp1 ingress protocol all pref 11 handle 102 \ + matchall skip_sw action $action_args + check_fail $? "Incorrect success to add matchall rule behind a flower rule" + + tc filter del dev $swp1 ingress protocol ip pref 10 handle 101 flower + + tc filter add dev $swp1 ingress protocol all pref 9 handle 102 \ + matchall skip_sw action $action_args + + tc filter add dev $swp1 ingress protocol ip pref 10 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + check_err $? "Failed to add flower rule behind a matchall rule" + + tc filter del dev $swp1 ingress protocol ip pref 10 handle 101 flower + + tc filter add dev $swp1 ingress protocol ip pref 8 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + check_fail $? "Incorrect success to add flower rule in front of a matchall rule" + + tc qdisc del dev $swp1 clsact + + log_test "matchall $action flower ingress" +} + +matchall_mirror_behind_flower_ingress_test() +{ + matchall_behind_flower_ingress_test "mirror" "mirred egress mirror dev $swp2" +} + +matchall_sample_behind_flower_ingress_test() +{ + matchall_behind_flower_ingress_test "sample" "sample rate 100 group 1" +} + +matchall_behind_flower_egress_test() +{ + local action=$1 + local action_args=$2 + + RET=0 + + # On egress, all matchall-mirror rules have to be behind the flower rules + + tc qdisc add dev $swp1 clsact + + tc filter add dev $swp1 egress protocol ip pref 10 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + + tc filter add dev $swp1 egress protocol all pref 11 handle 102 \ + matchall skip_sw action $action_args + check_err $? "Failed to add matchall rule in front of a flower rule" + + tc filter del dev $swp1 egress protocol all pref 11 handle 102 matchall + + tc filter add dev $swp1 egress protocol all pref 9 handle 102 \ + matchall skip_sw action $action_args + check_fail $? "Incorrect success to add matchall rule behind a flower rule" + + tc filter del dev $swp1 egress protocol ip pref 10 handle 101 flower + + tc filter add dev $swp1 egress protocol all pref 11 handle 102 \ + matchall skip_sw action $action_args + + tc filter add dev $swp1 egress protocol ip pref 10 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + check_err $? "Failed to add flower rule behind a matchall rule" + + tc filter del dev $swp1 egress protocol ip pref 10 handle 101 flower + + tc filter add dev $swp1 egress protocol ip pref 12 handle 101 flower \ + skip_sw dst_ip 192.0.2.2 action drop + check_fail $? "Incorrect success to add flower rule in front of a matchall rule" + + tc qdisc del dev $swp1 clsact + + log_test "matchall $action flower egress" +} + +matchall_mirror_behind_flower_egress_test() +{ + matchall_behind_flower_egress_test "mirror" "mirred egress mirror dev $swp2" +} + +matchall_proto_match_test() +{ + RET=0 + + tc qdisc add dev $swp1 clsact + + tc filter add dev $swp1 ingress pref 1 proto ip handle 101 \ + matchall skip_sw \ + action sample group 1 rate 100 + check_fail $? "Incorrect success to add matchall rule with protocol match" + + tc qdisc del dev $swp1 clsact + + log_test "matchall protocol match" +} + +police_limits_test() +{ + RET=0 + + tc qdisc add dev $swp1 clsact + + tc filter add dev $swp1 ingress pref 1 proto ip handle 101 \ + flower skip_sw \ + action police rate 0.5kbit burst 1m conform-exceed drop/ok + check_fail $? "Incorrect success to add police action with too low rate" + + tc filter add dev $swp1 ingress pref 1 proto ip handle 101 \ + flower skip_sw \ + action police rate 2.5tbit burst 1g conform-exceed drop/ok + check_fail $? "Incorrect success to add police action with too high rate" + + tc filter add dev $swp1 ingress pref 1 proto ip handle 101 \ + flower skip_sw \ + action police rate 1.5kbit burst 1m conform-exceed drop/ok + check_err $? "Failed to add police action with low rate" + + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + tc filter add dev $swp1 ingress pref 1 proto ip handle 101 \ + flower skip_sw \ + action police rate 1.9tbit burst 1g conform-exceed drop/ok + check_err $? "Failed to add police action with high rate" + + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + tc filter add dev $swp1 ingress pref 1 proto ip handle 101 \ + flower skip_sw \ + action police rate 1.5kbit burst 512b conform-exceed drop/ok + check_fail $? "Incorrect success to add police action with too low burst size" + + tc filter add dev $swp1 ingress pref 1 proto ip handle 101 \ + flower skip_sw \ + action police rate 1.5kbit burst 2k conform-exceed drop/ok + check_err $? "Failed to add police action with low burst size" + + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + tc qdisc del dev $swp1 clsact + + log_test "police rate and burst limits" +} + +multi_police_test() +{ + RET=0 + + # It is forbidden in mlxsw driver to have multiple police + # actions in a single rule. + + tc qdisc add dev $swp1 clsact + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 \ + flower skip_sw \ + action police rate 100mbit burst 100k conform-exceed drop/ok + check_err $? "Failed to add rule with single police action" + + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 \ + flower skip_sw \ + action police rate 100mbit burst 100k conform-exceed drop/pipe \ + action police rate 200mbit burst 200k conform-exceed drop/ok + check_fail $? "Incorrect success to add rule with two police actions" + + tc qdisc del dev $swp1 clsact + + log_test "multi police" +} + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + vrf_prepare + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + vrf_cleanup +} + +check_tc_shblock_support + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh new file mode 100755 index 0000000000..83a0210e75 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh @@ -0,0 +1,658 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test that packets are sampled when tc-sample is used and that reported +# metadata is correct. Two sets of hosts (with and without LAG) are used, since +# metadata extraction in mlxsw is a bit different when LAG is involved. +# +# +---------------------------------+ +---------------------------------+ +# | H1 (vrf) | | H3 (vrf) | +# | + $h1 | | + $h3_lag | +# | | 192.0.2.1/28 | | | 192.0.2.17/28 | +# | | | | | | +# | | default via 192.0.2.2 | | | default via 192.0.2.18 | +# +----|----------------------------+ +----|----------------------------+ +# | | +# +----|-----------------------------------------|----------------------------+ +# | | 192.0.2.2/28 | 192.0.2.18/28 | +# | + $rp1 + $rp3_lag | +# | | +# | + $rp2 + $rp4_lag | +# | | 198.51.100.2/28 | 198.51.100.18/28 | +# +----|-----------------------------------------|----------------------------+ +# | | +# +----|----------------------------+ +----|----------------------------+ +# | | default via 198.51.100.2 | | | default via 198.51.100.18 | +# | | | | | | +# | | 198.51.100.1/28 | | | 198.51.100.17/28 | +# | + $h2 | | + $h4_lag | +# | H2 (vrf) | | H4 (vrf) | +# +---------------------------------+ +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + tc_sample_rate_test + tc_sample_max_rate_test + tc_sample_conflict_test + tc_sample_group_conflict_test + tc_sample_md_iif_test + tc_sample_md_lag_iif_test + tc_sample_md_oif_test + tc_sample_md_lag_oif_test + tc_sample_md_out_tc_test + tc_sample_md_out_tc_occ_test + tc_sample_md_latency_test + tc_sample_acl_group_conflict_test + tc_sample_acl_rate_test + tc_sample_acl_max_rate_test +" +NUM_NETIFS=8 +CAPTURE_FILE=$(mktemp) +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source mlxsw_lib.sh + +# Available at https://github.com/Mellanox/libpsample +require_command psample + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + simple_if_fini $h1 192.0.2.1/28 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/28 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 +} + +h2_destroy() +{ + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + simple_if_fini $h2 198.51.100.1/28 +} + +h3_create() +{ + ip link set dev $h3 down + ip link add name ${h3}_bond type bond mode 802.3ad + ip link set dev $h3 master ${h3}_bond + + simple_if_init ${h3}_bond 192.0.2.17/28 + + ip -4 route add default vrf v${h3}_bond nexthop via 192.0.2.18 +} + +h3_destroy() +{ + ip -4 route del default vrf v${h3}_bond nexthop via 192.0.2.18 + + simple_if_fini ${h3}_bond 192.0.2.17/28 + + ip link set dev $h3 nomaster + ip link del dev ${h3}_bond +} + +h4_create() +{ + ip link set dev $h4 down + ip link add name ${h4}_bond type bond mode 802.3ad + ip link set dev $h4 master ${h4}_bond + + simple_if_init ${h4}_bond 198.51.100.17/28 + + ip -4 route add default vrf v${h4}_bond nexthop via 198.51.100.18 +} + +h4_destroy() +{ + ip -4 route del default vrf v${h4}_bond nexthop via 198.51.100.18 + + simple_if_fini ${h4}_bond 198.51.100.17/28 + + ip link set dev $h4 nomaster + ip link del dev ${h4}_bond +} + +router_create() +{ + ip link set dev $rp1 up + __addr_add_del $rp1 add 192.0.2.2/28 + tc qdisc add dev $rp1 clsact + + ip link set dev $rp2 up + __addr_add_del $rp2 add 198.51.100.2/28 + tc qdisc add dev $rp2 clsact + + ip link add name ${rp3}_bond type bond mode 802.3ad + ip link set dev $rp3 master ${rp3}_bond + __addr_add_del ${rp3}_bond add 192.0.2.18/28 + tc qdisc add dev $rp3 clsact + ip link set dev ${rp3}_bond up + + ip link add name ${rp4}_bond type bond mode 802.3ad + ip link set dev $rp4 master ${rp4}_bond + __addr_add_del ${rp4}_bond add 198.51.100.18/28 + tc qdisc add dev $rp4 clsact + ip link set dev ${rp4}_bond up +} + +router_destroy() +{ + ip link set dev ${rp4}_bond down + tc qdisc del dev $rp4 clsact + __addr_add_del ${rp4}_bond del 198.51.100.18/28 + ip link set dev $rp4 nomaster + ip link del dev ${rp4}_bond + + ip link set dev ${rp3}_bond down + tc qdisc del dev $rp3 clsact + __addr_add_del ${rp3}_bond del 192.0.2.18/28 + ip link set dev $rp3 nomaster + ip link del dev ${rp3}_bond + + tc qdisc del dev $rp2 clsact + __addr_add_del $rp2 del 198.51.100.2/28 + ip link set dev $rp2 down + + tc qdisc del dev $rp1 clsact + __addr_add_del $rp1 del 192.0.2.2/28 + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + h3=${NETIFS[p5]} + rp3=${NETIFS[p6]} + h4=${NETIFS[p7]} + rp4=${NETIFS[p8]} + + vrf_prepare + + h1_create + h2_create + h3_create + h4_create + router_create +} + +cleanup() +{ + pre_cleanup + + rm -f $CAPTURE_FILE + + router_destroy + h4_destroy + h3_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +psample_capture_start() +{ + rm -f $CAPTURE_FILE + + psample &> $CAPTURE_FILE & + + sleep 1 +} + +psample_capture_stop() +{ + { kill %% && wait %%; } 2>/dev/null +} + +__tc_sample_rate_test() +{ + local desc=$1; shift + local dip=$1; shift + local pkts pct + + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 32 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 320000 -d 100usec -p 64 -A 192.0.2.1 \ + -B $dip -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l) + pct=$((100 * (pkts - 10000) / 10000)) + (( -25 <= pct && pct <= 25)) + check_err $? "Expected 10000 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%" + + log_test "tc sample rate ($desc)" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_rate_test() +{ + __tc_sample_rate_test "forward" 198.51.100.1 + __tc_sample_rate_test "local receive" 192.0.2.2 +} + +tc_sample_max_rate_test() +{ + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate $((35 * 10 ** 8)) group 1 + check_err $? "Failed to configure sampling rule with max rate" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate $((35 * 10 ** 8 + 1)) \ + group 1 &> /dev/null + check_fail $? "Managed to configure sampling rate above maximum" + + log_test "tc sample maximum rate" +} + +tc_sample_conflict_test() +{ + RET=0 + + # Test that two sampling rules cannot be configured on the same port, + # even when they share the same parameters. + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \ + skip_sw action sample rate 1024 group 1 &> /dev/null + check_fail $? "Managed to configure second sampling rule" + + # Delete the first rule and make sure the second rule can now be + # configured. + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall + + tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule after deletion" + + log_test "tc sample conflict test" + + tc filter del dev $rp1 ingress protocol all pref 2 handle 102 matchall +} + +tc_sample_group_conflict_test() +{ + RET=0 + + # Test that two sampling rules cannot be configured on the same port + # with different groups. + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \ + skip_sw action sample rate 1024 group 2 &> /dev/null + check_fail $? "Managed to configure sampling rule with conflicting group" + + log_test "tc sample group conflict test" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_iif_test() +{ + local rp1_ifindex + + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp1_ifindex=$(ip -j -p link show dev $rp1 | jq '.[]["ifindex"]') + grep -q -e "in-ifindex $rp1_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected in-ifindex" + + log_test "tc sample iif" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_lag_iif_test() +{ + local rp3_ifindex + + RET=0 + + tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \ + -A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp3_ifindex=$(ip -j -p link show dev $rp3 | jq '.[]["ifindex"]') + grep -q -e "in-ifindex $rp3_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected in-ifindex" + + log_test "tc sample lag iif" + + tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_oif_test() +{ + local rp2_ifindex + + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp2_ifindex=$(ip -j -p link show dev $rp2 | jq '.[]["ifindex"]') + grep -q -e "out-ifindex $rp2_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-ifindex" + + log_test "tc sample oif" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_lag_oif_test() +{ + local rp4_ifindex + + RET=0 + + tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \ + -A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp4_ifindex=$(ip -j -p link show dev $rp4 | jq '.[]["ifindex"]') + grep -q -e "out-ifindex $rp4_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-ifindex" + + log_test "tc sample lag oif" + + tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_out_tc_test() +{ + RET=0 + + # Output traffic class is not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + # By default, all the packets should go to the same traffic class (0). + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "out-tc 0 " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-tc (0)" + + # Map all priorities to highest traffic class (7) and check reported + # out-tc. + tc qdisc replace dev $rp2 root handle 1: \ + prio bands 3 priomap 0 0 0 0 0 0 0 0 + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "out-tc 7 " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-tc (7)" + + log_test "tc sample out-tc" + + tc qdisc del dev $rp2 root handle 1: + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_out_tc_occ_test() +{ + local backlog pct occ + + RET=0 + + # Output traffic class occupancy is not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + # Configure a shaper on egress to create congestion. + tc qdisc replace dev $rp2 root handle 1: \ + tbf rate 1Mbit burst 256k limit 1M + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 0 -d 1usec -p 1400 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q & + + # Allow congestion to reach steady state. + sleep 10 + + backlog=$(tc -j -p -s qdisc show dev $rp2 | jq '.[0]["backlog"]') + + # Kill mausezahn. + { kill %% && wait %%; } 2>/dev/null + + psample_capture_stop + + # Record last congestion sample. + occ=$(grep -e "out-tc-occ " $CAPTURE_FILE | tail -n 1 | \ + cut -d ' ' -f 16) + + pct=$((100 * (occ - backlog) / backlog)) + (( -1 <= pct && pct <= 1)) + check_err $? "Recorded a congestion of $backlog bytes, but sampled congestion is $occ bytes, which is $pct% off. Required accuracy is +-5%" + + log_test "tc sample out-tc-occ" + + tc qdisc del dev $rp2 root handle 1: + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_latency_test() +{ + RET=0 + + # Egress sampling not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $rp2 egress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "latency " $CAPTURE_FILE + check_err $? "Sampled packets do not have latency attribute" + + log_test "tc sample latency" + + tc filter del dev $rp2 egress protocol all pref 1 handle 101 matchall +} + +tc_sample_acl_group_conflict_test() +{ + RET=0 + + # Test that two flower sampling rules cannot be configured on the same + # port with different groups. + + # Policy-based sampling is not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + tc filter add dev $rp1 ingress protocol ip pref 2 handle 102 flower \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule with same group" + + tc filter add dev $rp1 ingress protocol ip pref 3 handle 103 flower \ + skip_sw action sample rate 1024 group 2 &> /dev/null + check_fail $? "Managed to configure sampling rule with conflicting group" + + log_test "tc sample (w/ flower) group conflict test" + + tc filter del dev $rp1 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower +} + +__tc_sample_acl_rate_test() +{ + local bind=$1; shift + local port=$1; shift + local pkts pct + + RET=0 + + # Policy-based sampling is not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $port $bind protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 198.51.100.1 action sample rate 32 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 320000 -d 100usec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l) + pct=$((100 * (pkts - 10000) / 10000)) + (( -25 <= pct && pct <= 25)) + check_err $? "Expected 10000 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%" + + # Setup a filter that should not match any packet and make sure packets + # are not sampled. + tc filter del dev $port $bind protocol ip pref 1 handle 101 flower + + tc filter add dev $port $bind protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 198.51.100.10 action sample rate 32 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "group 1 " $CAPTURE_FILE + check_fail $? "Sampled packets when should not" + + log_test "tc sample (w/ flower) rate ($bind)" + + tc filter del dev $port $bind protocol ip pref 1 handle 101 flower +} + +tc_sample_acl_rate_test() +{ + __tc_sample_acl_rate_test ingress $rp1 + __tc_sample_acl_rate_test egress $rp2 +} + +tc_sample_acl_max_rate_test() +{ + RET=0 + + # Policy-based sampling is not supported on Spectrum-1. + mlxsw_only_on_spectrum 2+ || return + + tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw action sample rate $((2 ** 24 - 1)) group 1 + check_err $? "Failed to configure sampling rule with max rate" + + tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower + + tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw action sample rate $((2 ** 24)) \ + group 1 &> /dev/null + check_fail $? "Managed to configure sampling rate above maximum" + + log_test "tc sample (w/ flower) maximum rate" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh b/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh new file mode 100755 index 0000000000..4687b0a7df --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh @@ -0,0 +1,1185 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test various aspects of VxLAN offloading which are specific to mlxsw, such +# as sanitization of invalid configurations and offload indication. + +: ${ADDR_FAMILY:=ipv4} +export ADDR_FAMILY + +: ${LOCAL_IP_1:=198.51.100.1} +export LOCAL_IP_1 + +: ${LOCAL_IP_2:=198.51.100.2} +export LOCAL_IP_2 + +: ${PREFIX_LEN:=32} +export PREFIX_LEN + +: ${UDPCSUM_FLAFS:=noudpcsum} +export UDPCSUM_FLAFS + +: ${MC_IP:=239.0.0.1} +export MC_IP + +: ${IP_FLAG:=""} +export IP_FLAG + +: ${ALL_TESTS:=" + sanitization_test + offload_indication_test + sanitization_vlan_aware_test + offload_indication_vlan_aware_test +"} + +lib_dir=$(dirname $0)/../../../net/forwarding +NUM_NETIFS=2 +: ${TIMEOUT:=20000} # ms +source $lib_dir/lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +sanitization_single_dev_test_pass() +{ + ip link set dev $swp1 master br0 + check_err $? + ip link set dev vxlan0 master br0 + check_err $? + + ip link set dev $swp1 nomaster + + ip link set dev $swp1 master br0 + check_err $? +} + +sanitization_single_dev_test_fail() +{ + ip link set dev $swp1 master br0 + check_err $? + ip link set dev vxlan0 master br0 &> /dev/null + check_fail $? + + ip link set dev $swp1 nomaster + + ip link set dev vxlan0 master br0 + check_err $? + ip link set dev $swp1 master br0 &> /dev/null + check_fail $? +} + +sanitization_single_dev_valid_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_pass + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device - valid configuration" +} + +sanitization_single_dev_vlan_aware_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 vlan_filtering 1 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_pass + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with a vlan-aware bridge" +} + +sanitization_single_dev_mcast_enabled_test() +{ + RET=0 + + ip link add dev br0 type bridge + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with a multicast enabled bridge" +} + +sanitization_single_dev_mcast_group_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + ip link add name dummy1 up type dummy + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 \ + dev dummy1 group $MC_IP + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev dummy1 + ip link del dev br0 + + log_test "vxlan device with a multicast group" +} + +sanitization_single_dev_no_local_ip_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit dstport 4789 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with no local ip" +} + +sanitization_single_dev_learning_enabled_ipv4_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 learning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_pass + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with learning enabled" +} + +sanitization_single_dev_local_interface_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + ip link add name dummy1 up type dummy + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 dev dummy1 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev dummy1 + ip link del dev br0 + + log_test "vxlan device with local interface" +} + +sanitization_single_dev_port_range_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 \ + srcport 4000 5000 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with udp source port range" +} + +sanitization_single_dev_tos_static_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos 20 local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with static tos" +} + +sanitization_single_dev_ttl_inherit_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl inherit tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with inherit ttl" +} + +sanitization_single_dev_udp_checksum_ipv4_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning udpcsum \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with udp checksum" +} + +sanitization_single_dev_test() +{ + # These tests make sure that we correctly sanitize VxLAN device + # configurations we do not support + sanitization_single_dev_valid_test + sanitization_single_dev_vlan_aware_test + sanitization_single_dev_mcast_enabled_test + sanitization_single_dev_mcast_group_test + sanitization_single_dev_no_local_ip_test + sanitization_single_dev_learning_enabled_"$ADDR_FAMILY"_test + sanitization_single_dev_local_interface_test + sanitization_single_dev_port_range_test + sanitization_single_dev_tos_static_test + sanitization_single_dev_ttl_inherit_test + sanitization_single_dev_udp_checksum_"$ADDR_FAMILY"_test +} + +sanitization_multi_devs_test_pass() +{ + ip link set dev $swp1 master br0 + check_err $? + ip link set dev vxlan0 master br0 + check_err $? + ip link set dev $swp2 master br1 + check_err $? + ip link set dev vxlan1 master br1 + check_err $? + + ip link set dev $swp2 nomaster + ip link set dev $swp1 nomaster + + ip link set dev $swp1 master br0 + check_err $? + ip link set dev $swp2 master br1 + check_err $? +} + +sanitization_multi_devs_test_fail() +{ + ip link set dev $swp1 master br0 + check_err $? + ip link set dev vxlan0 master br0 + check_err $? + ip link set dev $swp2 master br1 + check_err $? + ip link set dev vxlan1 master br1 &> /dev/null + check_fail $? + + ip link set dev $swp2 nomaster + ip link set dev $swp1 nomaster + + ip link set dev vxlan1 master br1 + check_err $? + ip link set dev $swp1 master br0 + check_err $? + ip link set dev $swp2 master br1 &> /dev/null + check_fail $? +} + +sanitization_multi_devs_valid_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + ip link add dev br1 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + ip link add name vxlan1 up type vxlan id 20 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_multi_devs_test_pass + + ip link del dev vxlan1 + ip link del dev vxlan0 + ip link del dev br1 + ip link del dev br0 + + log_test "multiple vxlan devices - valid configuration" +} + +sanitization_multi_devs_ttl_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + ip link add dev br1 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + ip link add name vxlan1 up type vxlan id 20 nolearning $UDPCSUM_FLAFS \ + ttl 40 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_multi_devs_test_fail + + ip link del dev vxlan1 + ip link del dev vxlan0 + ip link del dev br1 + ip link del dev br0 + + log_test "multiple vxlan devices with different ttl" +} + +sanitization_multi_devs_udp_dstport_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + ip link add dev br1 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + ip link add name vxlan1 up type vxlan id 20 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 5789 + + sanitization_multi_devs_test_fail + + ip link del dev vxlan1 + ip link del dev vxlan0 + ip link del dev br1 + ip link del dev br0 + + log_test "multiple vxlan devices with different udp destination port" +} + +sanitization_multi_devs_local_ip_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + ip link add dev br1 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + ip link add name vxlan1 up type vxlan id 20 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_2 dstport 4789 + + sanitization_multi_devs_test_fail + + ip link del dev vxlan1 + ip link del dev vxlan0 + ip link del dev br1 + ip link del dev br0 + + log_test "multiple vxlan devices with different local ip" +} + +sanitization_multi_devs_test() +{ + # The device has a single VTEP, which means all the VxLAN devices + # we offload must share certain properties such as source IP and + # UDP destination port. These tests make sure that we forbid + # configurations that violate this limitation + sanitization_multi_devs_valid_test + sanitization_multi_devs_ttl_test + sanitization_multi_devs_udp_dstport_test + sanitization_multi_devs_local_ip_test +} + +sanitization_test() +{ + sanitization_single_dev_test + sanitization_multi_devs_test +} + +offload_indication_setup_create() +{ + # Create a simple setup with two bridges, each with a VxLAN device + # and one local port + ip link add name br0 type bridge mcast_snooping 0 + ip link set dev br0 addrgenmode none + ip link set dev br0 up + ip link add name br1 type bridge mcast_snooping 0 + ip link set dev br1 addrgenmode none + ip link set dev br1 up + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br1 + + ip address add $LOCAL_IP_1/$PREFIX_LEN dev lo + + ip link add name vxlan0 up master br0 type vxlan id 10 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + ip link add name vxlan1 up master br1 type vxlan id 20 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 +} + +offload_indication_setup_destroy() +{ + ip link del dev vxlan1 + ip link del dev vxlan0 + + ip address del $LOCAL_IP_1/$PREFIX_LEN dev lo + + ip link set dev $swp2 nomaster + ip link set dev $swp1 nomaster + + ip link del dev br1 + ip link del dev br0 +} + +offload_indication_fdb_flood_test() +{ + RET=0 + + bridge fdb append 00:00:00:00:00:00 dev vxlan0 self dst $LOCAL_IP_2 + + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb 00:00:00:00:00:00 \ + bridge fdb show brport vxlan0 + check_err $? + + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self + + log_test "vxlan flood entry offload indication" +} + +offload_indication_fdb_bridge_test() +{ + RET=0 + + bridge fdb add de:ad:be:ef:13:37 dev vxlan0 self master static \ + dst $LOCAL_IP_2 + + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan0 + check_err $? + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan0 + check_err $? + + log_test "vxlan entry offload indication - initial state" + + # Remove FDB entry from the bridge driver and check that corresponding + # entry in the VxLAN driver is not marked as offloaded + RET=0 + + bridge fdb del de:ad:be:ef:13:37 dev vxlan0 master + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan0 + check_err $? + + log_test "vxlan entry offload indication - after removal from bridge" + + # Add the FDB entry back to the bridge driver and make sure it is + # marked as offloaded in both drivers + RET=0 + + bridge fdb add de:ad:be:ef:13:37 dev vxlan0 master static + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan0 + check_err $? + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan0 + check_err $? + + log_test "vxlan entry offload indication - after re-add to bridge" + + # Remove FDB entry from the VxLAN driver and check that corresponding + # entry in the bridge driver is not marked as offloaded + RET=0 + + bridge fdb del de:ad:be:ef:13:37 dev vxlan0 self + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan0 + check_err $? + + log_test "vxlan entry offload indication - after removal from vxlan" + + # Add the FDB entry back to the VxLAN driver and make sure it is + # marked as offloaded in both drivers + RET=0 + + bridge fdb add de:ad:be:ef:13:37 dev vxlan0 self dst $LOCAL_IP_2 + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan0 + check_err $? + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan0 + check_err $? + + log_test "vxlan entry offload indication - after re-add to vxlan" + + bridge fdb del de:ad:be:ef:13:37 dev vxlan0 self master +} + +offload_indication_fdb_test() +{ + offload_indication_fdb_flood_test + offload_indication_fdb_bridge_test +} + +offload_indication_decap_route_test() +{ + RET=0 + + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link set dev vxlan0 down + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link set dev vxlan1 down + busywait "$TIMEOUT" not wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + log_test "vxlan decap route - vxlan device down" + + RET=0 + + ip link set dev vxlan1 up + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link set dev vxlan0 up + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + log_test "vxlan decap route - vxlan device up" + + RET=0 + + ip address delete $LOCAL_IP_1/$PREFIX_LEN dev lo + busywait "$TIMEOUT" not wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip address add $LOCAL_IP_1/$PREFIX_LEN dev lo + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + log_test "vxlan decap route - add local route" + + RET=0 + + ip link set dev $swp1 nomaster + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link set dev $swp2 nomaster + busywait "$TIMEOUT" not wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br1 + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + log_test "vxlan decap route - local ports enslavement" + + RET=0 + + ip link del dev br0 + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link del dev br1 + busywait "$TIMEOUT" not wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + log_test "vxlan decap route - bridge device deletion" + + RET=0 + + ip link add name br0 type bridge mcast_snooping 0 + ip link set dev br0 addrgenmode none + ip link set dev br0 up + ip link add name br1 type bridge mcast_snooping 0 + ip link set dev br1 addrgenmode none + ip link set dev br1 up + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br1 + ip link set dev vxlan0 master br0 + ip link set dev vxlan1 master br1 + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link del dev vxlan0 + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + ip link del dev vxlan1 + busywait "$TIMEOUT" not wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + log_test "vxlan decap route - vxlan device deletion" + + ip link add name vxlan0 up master br0 type vxlan id 10 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + ip link add name vxlan1 up master br1 type vxlan id 20 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 +} + +check_fdb_offloaded() +{ + local mac=00:11:22:33:44:55 + local zmac=00:00:00:00:00:00 + + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb $mac self \ + bridge fdb show dev vxlan0 + check_err $? + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb $mac master \ + bridge fdb show dev vxlan0 + check_err $? + + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show dev vxlan0 + check_err $? +} + +check_vxlan_fdb_not_offloaded() +{ + local mac=00:11:22:33:44:55 + local zmac=00:00:00:00:00:00 + + bridge fdb show dev vxlan0 | grep $mac | grep -q self + check_err $? + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb $mac self \ + bridge fdb show dev vxlan0 + check_err $? + + bridge fdb show dev vxlan0 | grep $zmac | grep -q self + check_err $? + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show dev vxlan0 + check_err $? +} + +check_bridge_fdb_not_offloaded() +{ + local mac=00:11:22:33:44:55 + local zmac=00:00:00:00:00:00 + + bridge fdb show dev vxlan0 | grep $mac | grep -q master + check_err $? + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb $mac master \ + bridge fdb show dev vxlan0 + check_err $? +} + +__offload_indication_join_vxlan_first() +{ + local vid=$1; shift + + local mac=00:11:22:33:44:55 + local zmac=00:00:00:00:00:00 + + bridge fdb append $zmac dev vxlan0 self dst $LOCAL_IP_2 + + ip link set dev vxlan0 master br0 + bridge fdb add dev vxlan0 $mac self master static dst $LOCAL_IP_2 + + RET=0 + check_vxlan_fdb_not_offloaded + ip link set dev $swp1 master br0 + sleep .1 + check_fdb_offloaded + log_test "offload indication - attach vxlan first" + + RET=0 + ip link set dev vxlan0 down + check_vxlan_fdb_not_offloaded + check_bridge_fdb_not_offloaded + log_test "offload indication - set vxlan down" + + RET=0 + ip link set dev vxlan0 up + sleep .1 + check_fdb_offloaded + log_test "offload indication - set vxlan up" + + if [[ ! -z $vid ]]; then + RET=0 + bridge vlan del dev vxlan0 vid $vid + check_vxlan_fdb_not_offloaded + check_bridge_fdb_not_offloaded + log_test "offload indication - delete VLAN" + + RET=0 + bridge vlan add dev vxlan0 vid $vid + check_vxlan_fdb_not_offloaded + check_bridge_fdb_not_offloaded + log_test "offload indication - add tagged VLAN" + + RET=0 + bridge vlan add dev vxlan0 vid $vid pvid untagged + sleep .1 + check_fdb_offloaded + log_test "offload indication - add pvid/untagged VLAN" + fi + + RET=0 + ip link set dev $swp1 nomaster + check_vxlan_fdb_not_offloaded + log_test "offload indication - detach port" +} + +offload_indication_join_vxlan_first() +{ + ip link add dev br0 type bridge mcast_snooping 0 + ip link set dev br0 addrgenmode none + ip link set dev br0 up + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + __offload_indication_join_vxlan_first + + ip link del dev vxlan0 + ip link del dev br0 +} + +__offload_indication_join_vxlan_last() +{ + local zmac=00:00:00:00:00:00 + + RET=0 + + bridge fdb append $zmac dev vxlan0 self dst $LOCAL_IP_2 + + ip link set dev $swp1 master br0 + + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show dev vxlan0 + check_err $? + + ip link set dev vxlan0 master br0 + + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show dev vxlan0 + check_err $? + + log_test "offload indication - attach vxlan last" +} + +offload_indication_join_vxlan_last() +{ + ip link add dev br0 type bridge mcast_snooping 0 + ip link set dev br0 addrgenmode none + ip link set dev br0 up + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + __offload_indication_join_vxlan_last + + ip link del dev vxlan0 + ip link del dev br0 +} + +offload_indication_test() +{ + offload_indication_setup_create + offload_indication_fdb_test + offload_indication_decap_route_test + offload_indication_setup_destroy + + log_info "offload indication - replay & cleanup" + offload_indication_join_vxlan_first + offload_indication_join_vxlan_last +} + +sanitization_vlan_aware_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 vlan_filtering 1 + ip link set dev br0 addrgenmode none + + ip link add name vxlan10 up master br0 type vxlan id 10 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + ip link add name vxlan20 up master br0 type vxlan id 20 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + # Test that when each VNI is mapped to a different VLAN we can enslave + # a port to the bridge + bridge vlan add vid 10 dev vxlan10 pvid untagged + bridge vlan add vid 20 dev vxlan20 pvid untagged + + ip link set dev $swp1 master br0 + check_err $? + + log_test "vlan-aware - enslavement to vlan-aware bridge" + + # Try to map both VNIs to the same VLAN and make sure configuration + # fails + RET=0 + + bridge vlan add vid 10 dev vxlan20 pvid untagged &> /dev/null + check_fail $? + + log_test "vlan-aware - two vnis mapped to the same vlan" + + # Test that enslavement of a port to a bridge fails when two VNIs + # are mapped to the same VLAN + RET=0 + + ip link set dev $swp1 nomaster + + bridge vlan del vid 20 dev vxlan20 pvid untagged + bridge vlan add vid 10 dev vxlan20 pvid untagged + + ip link set dev $swp1 master br0 &> /dev/null + check_fail $? + + log_test "vlan-aware - failed enslavement to vlan-aware bridge" + + bridge vlan del vid 10 dev vxlan20 + bridge vlan add vid 20 dev vxlan20 pvid untagged + + # Test that when two VXLAN tunnels with conflicting configurations + # (i.e., different TTL) are enslaved to the same VLAN-aware bridge, + # then the enslavement of a port to the bridge is denied. + + # Use the offload indication of the local route to ensure the VXLAN + # configuration was correctly rollbacked. + ip address add $LOCAL_IP_1/$PREFIX_LEN dev lo + + ip link set dev vxlan10 type vxlan ttl 10 + ip link set dev $swp1 master br0 &> /dev/null + check_fail $? + + busywait "$TIMEOUT" not wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + log_test "vlan-aware - failed enslavement to bridge due to conflict" + + ip link set dev vxlan10 type vxlan ttl 20 + ip address del $LOCAL_IP_1/$PREFIX_LEN dev lo + + ip link del dev vxlan20 + ip link del dev vxlan10 + ip link del dev br0 +} + +offload_indication_vlan_aware_setup_create() +{ + # Create a simple setup with two VxLAN devices and a single VLAN-aware + # bridge + ip link add name br0 type bridge mcast_snooping 0 vlan_filtering 1 \ + vlan_default_pvid 0 + ip link set dev br0 addrgenmode none + ip link set dev br0 up + + ip link set dev $swp1 master br0 + + bridge vlan add vid 10 dev $swp1 + bridge vlan add vid 20 dev $swp1 + + ip address add $LOCAL_IP_1/$PREFIX_LEN dev lo + + ip link add name vxlan10 up master br0 type vxlan id 10 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + ip link add name vxlan20 up master br0 type vxlan id 20 nolearning \ + $UDPCSUM_FLAFS ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + bridge vlan add vid 10 dev vxlan10 pvid untagged + bridge vlan add vid 20 dev vxlan20 pvid untagged +} + +offload_indication_vlan_aware_setup_destroy() +{ + bridge vlan del vid 20 dev vxlan20 + bridge vlan del vid 10 dev vxlan10 + + ip link del dev vxlan20 + ip link del dev vxlan10 + + ip address del $LOCAL_IP_1/$PREFIX_LEN dev lo + + bridge vlan del vid 20 dev $swp1 + bridge vlan del vid 10 dev $swp1 + + ip link set dev $swp1 nomaster + + ip link del dev br0 +} + +offload_indication_vlan_aware_fdb_test() +{ + RET=0 + + log_info "vxlan entry offload indication - vlan-aware" + + bridge fdb add de:ad:be:ef:13:37 dev vxlan10 self master static \ + dst $LOCAL_IP_2 vlan 10 + + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan10 + check_err $? + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan10 + check_err $? + + log_test "vxlan entry offload indication - initial state" + + # Remove FDB entry from the bridge driver and check that corresponding + # entry in the VxLAN driver is not marked as offloaded + RET=0 + + bridge fdb del de:ad:be:ef:13:37 dev vxlan10 master vlan 10 + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan10 + check_err $? + + log_test "vxlan entry offload indication - after removal from bridge" + + # Add the FDB entry back to the bridge driver and make sure it is + # marked as offloaded in both drivers + RET=0 + + bridge fdb add de:ad:be:ef:13:37 dev vxlan10 master static vlan 10 + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan10 + check_err $? + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan10 + check_err $? + + log_test "vxlan entry offload indication - after re-add to bridge" + + # Remove FDB entry from the VxLAN driver and check that corresponding + # entry in the bridge driver is not marked as offloaded + RET=0 + + bridge fdb del de:ad:be:ef:13:37 dev vxlan10 self + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan10 + check_err $? + + log_test "vxlan entry offload indication - after removal from vxlan" + + # Add the FDB entry back to the VxLAN driver and make sure it is + # marked as offloaded in both drivers + RET=0 + + bridge fdb add de:ad:be:ef:13:37 dev vxlan10 self dst $LOCAL_IP_2 + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self bridge fdb show brport vxlan10 + check_err $? + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb \ + de:ad:be:ef:13:37 self -v bridge fdb show brport vxlan10 + check_err $? + + log_test "vxlan entry offload indication - after re-add to vxlan" + + bridge fdb del de:ad:be:ef:13:37 dev vxlan10 self master vlan 10 +} + +offload_indication_vlan_aware_decap_route_test() +{ + RET=0 + + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + # Toggle PVID flag on one VxLAN device and make sure route is still + # marked as offloaded + bridge vlan add vid 10 dev vxlan10 untagged + + busywait "$TIMEOUT" wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + # Toggle PVID flag on second VxLAN device and make sure route is no + # longer marked as offloaded + bridge vlan add vid 20 dev vxlan20 untagged + + busywait "$TIMEOUT" not wait_for_offload \ + ip $IP_FLAG route show table local $LOCAL_IP_1 + check_err $? + + # Toggle PVID flag back and make sure route is marked as offloaded + bridge vlan add vid 10 dev vxlan10 pvid untagged + bridge vlan add vid 20 dev vxlan20 pvid untagged + + busywait "$TIMEOUT" wait_for_offload ip $IP_FLAG route show table local \ + $LOCAL_IP_1 + check_err $? + + log_test "vxlan decap route - vni map/unmap" +} + +offload_indication_vlan_aware_join_vxlan_first() +{ + ip link add dev br0 type bridge mcast_snooping 0 \ + vlan_filtering 1 vlan_default_pvid 1 + ip link set dev br0 addrgenmode none + ip link set dev br0 up + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + __offload_indication_join_vxlan_first 1 + + ip link del dev vxlan0 + ip link del dev br0 +} + +offload_indication_vlan_aware_join_vxlan_last() +{ + ip link add dev br0 type bridge mcast_snooping 0 \ + vlan_filtering 1 vlan_default_pvid 1 + ip link set dev br0 addrgenmode none + ip link set dev br0 up + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + __offload_indication_join_vxlan_last + + ip link del dev vxlan0 + ip link del dev br0 +} + +offload_indication_vlan_aware_l3vni_test() +{ + local zmac=00:00:00:00:00:00 + + RET=0 + + sysctl_set net.ipv6.conf.default.disable_ipv6 1 + ip link add dev br0 type bridge mcast_snooping 0 \ + vlan_filtering 1 vlan_default_pvid 0 + ip link set dev br0 addrgenmode none + ip link set dev br0 up + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + ip link set dev $swp1 master br0 + + # The test will use the offload indication on the FDB entry to + # understand if the tunnel is offloaded or not + bridge fdb append $zmac dev vxlan0 self dst $LOCAL_IP_2 + + ip link set dev vxlan0 master br0 + bridge vlan add dev vxlan0 vid 10 pvid untagged + + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show brport vxlan0 + check_err $? "vxlan tunnel not offloaded when should" + + # Configure a VLAN interface and make sure tunnel is offloaded + ip link add link br0 name br10 up type vlan id 10 + sysctl_set net.ipv6.conf.br10.disable_ipv6 0 + ip -6 address add 2001:db8:1::1/64 dev br10 + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show brport vxlan0 + check_err $? "vxlan tunnel not offloaded when should" + + # Unlink the VXLAN device, make sure tunnel is no longer offloaded, + # then add it back to the bridge and make sure it is offloaded + ip link set dev vxlan0 nomaster + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show brport vxlan0 + check_err $? "vxlan tunnel offloaded after unlinked from bridge" + + ip link set dev vxlan0 master br0 + busywait "$TIMEOUT" not wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show brport vxlan0 + check_err $? "vxlan tunnel offloaded despite no matching vid" + + bridge vlan add dev vxlan0 vid 10 pvid untagged + busywait "$TIMEOUT" wait_for_offload grep_bridge_fdb $zmac self \ + bridge fdb show brport vxlan0 + check_err $? "vxlan tunnel not offloaded after adding vid" + + log_test "vxlan - l3 vni" + + ip link del dev vxlan0 + ip link del dev br0 + sysctl_restore net.ipv6.conf.default.disable_ipv6 +} + +offload_indication_vlan_aware_test() +{ + offload_indication_vlan_aware_setup_create + offload_indication_vlan_aware_fdb_test + offload_indication_vlan_aware_decap_route_test + offload_indication_vlan_aware_setup_destroy + + log_info "offload indication - replay & cleanup - vlan aware" + offload_indication_vlan_aware_join_vxlan_first + offload_indication_vlan_aware_join_vxlan_last + offload_indication_vlan_aware_l3vni_test +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/vxlan_fdb_veto.sh b/tools/testing/selftests/drivers/net/mlxsw/vxlan_fdb_veto.sh new file mode 100755 index 0000000000..38148f5187 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/vxlan_fdb_veto.sh @@ -0,0 +1,141 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test vetoing of FDB entries that mlxsw can not offload. This exercises several +# different veto vectors to test various rollback scenarios in the vxlan driver. + +: ${LOCAL_IP:=198.51.100.1} +export LOCAL_IP + +: ${REMOTE_IP_1:=198.51.100.2} +export REMOTE_IP_1 + +: ${REMOTE_IP_2:=198.51.100.3} +export REMOTE_IP_2 + +: ${UDPCSUM_FLAFS:=noudpcsum} +export UDPCSUM_FLAFS + +: ${MC_IP:=224.0.0.1} +export MC_IP + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + fdb_create_veto_test + fdb_replace_veto_test + fdb_append_veto_test + fdb_changelink_veto_test +" +NUM_NETIFS=2 +source $lib_dir/lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link set dev $swp1 up + ip link set dev $swp1 master br0 + ip link set dev $swp2 up + + ip link add name vxlan0 up type vxlan id 10 nolearning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP dstport 4789 + ip link set dev vxlan0 master br0 +} + +cleanup() +{ + pre_cleanup + + ip link set dev vxlan0 nomaster + ip link del dev vxlan0 + + ip link set dev $swp2 down + ip link set dev $swp1 nomaster + ip link set dev $swp1 down + + ip link del dev br0 +} + +fdb_create_veto_test() +{ + RET=0 + + bridge fdb add 01:02:03:04:05:06 dev vxlan0 self static \ + dst $REMOTE_IP_1 2>/dev/null + check_fail $? "multicast MAC not rejected" + + bridge fdb add 01:02:03:04:05:06 dev vxlan0 self static \ + dst $REMOTE_IP_1 2>&1 >/dev/null | grep -q mlxsw_spectrum + check_err $? "multicast MAC rejected without extack" + + log_test "vxlan FDB veto - create" +} + +fdb_replace_veto_test() +{ + RET=0 + + bridge fdb add 00:01:02:03:04:05 dev vxlan0 self static \ + dst $REMOTE_IP_1 + check_err $? "valid FDB rejected" + + bridge fdb replace 00:01:02:03:04:05 dev vxlan0 self static \ + dst $REMOTE_IP_1 port 1234 2>/dev/null + check_fail $? "FDB with an explicit port not rejected" + + bridge fdb replace 00:01:02:03:04:05 dev vxlan0 self static \ + dst $REMOTE_IP_1 port 1234 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "FDB with an explicit port rejected without extack" + + log_test "vxlan FDB veto - replace" +} + +fdb_append_veto_test() +{ + RET=0 + + bridge fdb add 00:00:00:00:00:00 dev vxlan0 self static \ + dst $REMOTE_IP_1 + check_err $? "valid FDB rejected" + + bridge fdb append 00:00:00:00:00:00 dev vxlan0 self static \ + dst $REMOTE_IP_2 port 1234 2>/dev/null + check_fail $? "FDB with an explicit port not rejected" + + bridge fdb append 00:00:00:00:00:00 dev vxlan0 self static \ + dst $REMOTE_IP_2 port 1234 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "FDB with an explicit port rejected without extack" + + log_test "vxlan FDB veto - append" +} + +fdb_changelink_veto_test() +{ + RET=0 + + ip link set dev vxlan0 type vxlan \ + group $MC_IP dev lo 2>/dev/null + check_fail $? "FDB with a multicast IP not rejected" + + ip link set dev vxlan0 type vxlan \ + group $MC_IP dev lo 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "FDB with a multicast IP rejected without extack" + + log_test "vxlan FDB veto - changelink" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/vxlan_fdb_veto_ipv6.sh b/tools/testing/selftests/drivers/net/mlxsw/vxlan_fdb_veto_ipv6.sh new file mode 100755 index 0000000000..66c87aab86 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/vxlan_fdb_veto_ipv6.sh @@ -0,0 +1,12 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# A wrapper to run VXLAN test for IPv6. + +LOCAL_IP=2001:db8:1::1 +REMOTE_IP_1=2001:db8:2::1 +REMOTE_IP_2=2001:db8:3::1 +UDPCSUM_FLAFS="udp6zerocsumrx udp6zerocsumtx" +MC_IP=FF02::2 + +source vxlan_fdb_veto.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/vxlan_flooding.sh b/tools/testing/selftests/drivers/net/mlxsw/vxlan_flooding.sh new file mode 100755 index 0000000000..af5ea50ed5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/vxlan_flooding.sh @@ -0,0 +1,326 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test VxLAN flooding. The device stores flood records in a singly linked list +# where each record stores up to three IPv4 addresses of remote VTEPs. The test +# verifies that packets are correctly flooded in various cases such as deletion +# of a record in the middle of the list. +# +# +--------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 203.0.113.1/24| +# +----|---------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 BR0 (802.1d) | | +# | | | | +# | | + vxlan0 (vxlan) | | +# | | local 198.51.100.1 | | +# | | remote 198.51.100.{2..13} | | +# | | id 10 dstport 4789 | | +# | +-----------------------------------------------------------------------+ | +# | | +# | 198.51.100.0/24 via 192.0.2.2 | +# | | +# | + $rp1 | +# | | 192.0.2.1/24 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | R2 (vrf) | +# | + $rp2 | +# | 192.0.2.2/24 | +# | | +# +-------------------------------------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS="flooding_test" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +h1_create() +{ + simple_if_init $h1 203.0.113.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 203.0.113.1/24 +} + +switch_create() +{ + # Make sure the bridge uses the MAC address of the local port and + # not that of the VxLAN's device + ip link add dev br0 type bridge mcast_snooping 0 + ip link set dev br0 address $(mac_get $swp1) + + ip link add name vxlan0 type vxlan id 10 nolearning noudpcsum \ + ttl 20 tos inherit local 198.51.100.1 dstport 4789 + + ip address add 198.51.100.1/32 dev lo + + ip link set dev $swp1 master br0 + ip link set dev vxlan0 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev vxlan0 up +} + +switch_destroy() +{ + ip link set dev vxlan0 down + ip link set dev $swp1 down + ip link set dev br0 down + + ip link set dev vxlan0 nomaster + ip link set dev $swp1 nomaster + + ip address del 198.51.100.1/32 dev lo + + ip link del dev vxlan0 + + ip link del dev br0 +} + +router1_create() +{ + # This router is in the default VRF, where the VxLAN device is + # performing the L3 lookup + ip link set dev $rp1 up + ip address add 192.0.2.1/24 dev $rp1 + ip route add 198.51.100.0/24 via 192.0.2.2 +} + +router1_destroy() +{ + ip route del 198.51.100.0/24 via 192.0.2.2 + ip address del 192.0.2.1/24 dev $rp1 + ip link set dev $rp1 down +} + +router2_create() +{ + # This router is not in the default VRF, so use simple_if_init() + simple_if_init $rp2 192.0.2.2/24 +} + +router2_destroy() +{ + simple_if_fini $rp2 192.0.2.2/24 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + + h1_create + + switch_create + + router1_create + router2_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + router2_destroy + router1_destroy + + switch_destroy + + h1_destroy + + vrf_cleanup +} + +flooding_remotes_add() +{ + local num_remotes=$1 + local lsb + local i + + for i in $(eval echo {1..$num_remotes}); do + lsb=$((i + 1)) + + bridge fdb append 00:00:00:00:00:00 dev vxlan0 self \ + dst 198.51.100.$lsb + done +} + +flooding_filters_add() +{ + local num_remotes=$1 + local lsb + local i + + # Prevent unwanted packets from entering the bridge and interfering + # with the test. + tc qdisc add dev br0 clsact + tc filter add dev br0 egress protocol all pref 1 handle 1 \ + matchall skip_hw action drop + tc qdisc add dev $h1 clsact + tc filter add dev $h1 egress protocol all pref 1 handle 1 \ + flower skip_hw dst_mac de:ad:be:ef:13:37 action pass + tc filter add dev $h1 egress protocol all pref 2 handle 2 \ + matchall skip_hw action drop + + tc qdisc add dev $rp2 clsact + + for i in $(eval echo {1..$num_remotes}); do + lsb=$((i + 1)) + + tc filter add dev $rp2 ingress protocol ip pref $i handle $i \ + flower ip_proto udp dst_ip 198.51.100.$lsb \ + dst_port 4789 skip_sw action drop + done +} + +flooding_filters_del() +{ + local num_remotes=$1 + local i + + for i in $(eval echo {1..$num_remotes}); do + tc filter del dev $rp2 ingress protocol ip pref $i \ + handle $i flower + done + + tc qdisc del dev $rp2 clsact + + tc filter del dev $h1 egress protocol all pref 2 handle 2 matchall + tc filter del dev $h1 egress protocol all pref 1 handle 1 flower + tc qdisc del dev $h1 clsact + tc filter del dev br0 egress protocol all pref 1 handle 1 matchall + tc qdisc del dev br0 clsact +} + +flooding_check_packets() +{ + local packets=("$@") + local num_remotes=${#packets[@]} + local i + + for i in $(eval echo {1..$num_remotes}); do + tc_check_packets "dev $rp2 ingress" $i ${packets[i - 1]} + check_err $? "remote $i - did not get expected number of packets" + done +} + +flooding_test() +{ + # Use 12 remote VTEPs that will be stored in 4 records. The array + # 'packets' will store how many packets are expected to be received + # by each remote VTEP at each stage of the test + declare -a packets=(1 1 1 1 1 1 1 1 1 1 1 1) + local num_remotes=12 + + RET=0 + + # Add FDB entries for remote VTEPs and corresponding tc filters on the + # ingress of the nexthop router. These filters will count how many + # packets were flooded to each remote VTEP + flooding_remotes_add $num_remotes + flooding_filters_add $num_remotes + + # Send one packet and make sure it is flooded to all the remote VTEPs + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 1 packet" + + # Delete the third record which corresponds to VTEPs with LSB 8..10 + # and check that packet is flooded correctly when we remove a record + # from the middle of the list + RET=0 + + packets=(2 2 2 2 2 2 1 1 1 2 2 2) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.8 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.9 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.10 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 2 packets" + + # Delete the first record and make sure the packet is flooded correctly + RET=0 + + packets=(2 2 2 3 3 3 1 1 1 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.2 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.3 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.4 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 3 packets" + + # Delete the last record and make sure the packet is flooded correctly + RET=0 + + packets=(2 2 2 4 4 4 1 1 1 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.11 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.12 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.13 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 4 packets" + + # Delete the last record, one entry at a time and make sure single + # entries are correctly removed + RET=0 + + packets=(2 2 2 4 5 5 1 1 1 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.5 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 5 packets" + + RET=0 + + packets=(2 2 2 4 5 6 1 1 1 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.6 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 6 packets" + + RET=0 + + packets=(2 2 2 4 5 6 1 1 1 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.7 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 7 packets" + + flooding_filters_del $num_remotes +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/vxlan_ipv6.sh b/tools/testing/selftests/drivers/net/mlxsw/vxlan_ipv6.sh new file mode 100755 index 0000000000..f2ea0163dd --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/vxlan_ipv6.sh @@ -0,0 +1,65 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# A wrapper to run VXLAN test for IPv6. + +ADDR_FAMILY=ipv6 +LOCAL_IP_1=2001:db8:1::1 +LOCAL_IP_2=2001:db8:1::2 +PREFIX_LEN=128 +UDPCSUM_FLAFS="udp6zerocsumrx udp6zerocsumtx" +MC_IP=FF02::2 +IP_FLAG="-6" + +ALL_TESTS=" + sanitization_test + offload_indication_test + sanitization_vlan_aware_test + offload_indication_vlan_aware_test +" + +sanitization_single_dev_learning_enabled_ipv6_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 learning $UDPCSUM_FLAFS \ + ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_fail + + ip link del dev vxlan0 + ip link del dev br0 + + log_test "vxlan device with learning enabled" +} + +sanitization_single_dev_udp_checksum_ipv6_test() +{ + RET=0 + + ip link add dev br0 type bridge mcast_snooping 0 + + ip link add name vxlan0 up type vxlan id 10 nolearning \ + noudp6zerocsumrx udp6zerocsumtx ttl 20 tos inherit \ + local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_fail + log_test "vxlan device without zero udp checksum at RX" + + ip link del dev vxlan0 + + ip link add name vxlan0 up type vxlan id 10 nolearning \ + udp6zerocsumrx noudp6zerocsumtx ttl 20 tos inherit \ + local $LOCAL_IP_1 dstport 4789 + + sanitization_single_dev_test_fail + log_test "vxlan device without zero udp checksum at TX" + + ip link del dev vxlan0 + ip link del dev br0 + +} + +source vxlan.sh diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh new file mode 100755 index 0000000000..7f7d20f222 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh @@ -0,0 +1,713 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS="fw_flash_test params_test regions_test reload_test \ + netns_reload_test resource_test dev_info_test \ + empty_reporter_test dummy_reporter_test rate_test" +NUM_NETIFS=0 +source $lib_dir/lib.sh + +BUS_ADDR=10 +PORT_COUNT=4 +VF_COUNT=4 +DEV_NAME=netdevsim$BUS_ADDR +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV_NAME/net/ +DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV_NAME/ +DL_HANDLE=netdevsim/$DEV_NAME + +wait_for_devlink() +{ + "$@" | grep -q $DL_HANDLE +} + +devlink_wait() +{ + local timeout=$1 + + busywait "$timeout" wait_for_devlink devlink dev +} + +fw_flash_test() +{ + RET=0 + + devlink dev flash $DL_HANDLE file dummy + check_err $? "Failed to flash with status updates on" + + devlink dev flash $DL_HANDLE file dummy component fw.mgmt + check_err $? "Failed to flash with component attribute" + + devlink dev flash $DL_HANDLE file dummy overwrite settings + check_fail $? "Flash with overwrite settings should be rejected" + + echo "1"> $DEBUGFS_DIR/fw_update_overwrite_mask + check_err $? "Failed to change allowed overwrite mask" + + devlink dev flash $DL_HANDLE file dummy overwrite settings + check_err $? "Failed to flash with settings overwrite enabled" + + devlink dev flash $DL_HANDLE file dummy overwrite identifiers + check_fail $? "Flash with overwrite settings should be identifiers" + + echo "3"> $DEBUGFS_DIR/fw_update_overwrite_mask + check_err $? "Failed to change allowed overwrite mask" + + devlink dev flash $DL_HANDLE file dummy overwrite identifiers overwrite settings + check_err $? "Failed to flash with settings and identifiers overwrite enabled" + + echo "n"> $DEBUGFS_DIR/fw_update_status + check_err $? "Failed to disable status updates" + + devlink dev flash $DL_HANDLE file dummy + check_err $? "Failed to flash with status updates off" + + log_test "fw flash test" +} + +param_get() +{ + local name=$1 + + cmd_jq "devlink dev param show $DL_HANDLE name $name -j" \ + '.[][][].values[] | select(.cmode == "driverinit").value' +} + +param_set() +{ + local name=$1 + local value=$2 + + devlink dev param set $DL_HANDLE name $name cmode driverinit value $value +} + +check_value() +{ + local name=$1 + local phase_name=$2 + local expected_param_value=$3 + local expected_debugfs_value=$4 + local value + + value=$(param_get $name) + check_err $? "Failed to get $name param value" + [ "$value" == "$expected_param_value" ] + check_err $? "Unexpected $phase_name $name param value" + value=$(<$DEBUGFS_DIR/$name) + check_err $? "Failed to get $name debugfs value" + [ "$value" == "$expected_debugfs_value" ] + check_err $? "Unexpected $phase_name $name debugfs value" +} + +params_test() +{ + RET=0 + + local max_macs + local test1 + + check_value max_macs initial 32 32 + check_value test1 initial true Y + + param_set max_macs 16 + check_err $? "Failed to set max_macs param value" + param_set test1 false + check_err $? "Failed to set test1 param value" + + check_value max_macs post-set 16 32 + check_value test1 post-set false Y + + devlink dev reload $DL_HANDLE + + check_value max_macs post-reload 16 16 + check_value test1 post-reload false N + + log_test "params test" +} + +check_region_size() +{ + local name=$1 + local size + + size=$(devlink region show $DL_HANDLE/$name -j | jq -e -r '.[][].size') + check_err $? "Failed to get $name region size" + [ $size -eq 32768 ] + check_err $? "Invalid $name region size" +} + +check_region_snapshot_count() +{ + local name=$1 + local phase_name=$2 + local expected_count=$3 + local count + + count=$(devlink region show $DL_HANDLE/$name -j | jq -e -r '.[][].snapshot | length') + [ $count -eq $expected_count ] + check_err $? "Unexpected $phase_name snapshot count" +} + +regions_test() +{ + RET=0 + + local count + + check_region_size dummy + check_region_snapshot_count dummy initial 0 + + echo ""> $DEBUGFS_DIR/take_snapshot + check_err $? "Failed to take first dummy region snapshot" + check_region_snapshot_count dummy post-first-snapshot 1 + + echo ""> $DEBUGFS_DIR/take_snapshot + check_err $? "Failed to take second dummy region snapshot" + check_region_snapshot_count dummy post-second-snapshot 2 + + echo ""> $DEBUGFS_DIR/take_snapshot + check_err $? "Failed to take third dummy region snapshot" + check_region_snapshot_count dummy post-third-snapshot 3 + + devlink region del $DL_HANDLE/dummy snapshot 1 + check_err $? "Failed to delete first dummy region snapshot" + + check_region_snapshot_count dummy post-first-delete 2 + + devlink region new $DL_HANDLE/dummy snapshot 25 + check_err $? "Failed to create a new snapshot with id 25" + + check_region_snapshot_count dummy post-first-request 3 + + devlink region dump $DL_HANDLE/dummy snapshot 25 >> /dev/null + check_err $? "Failed to dump snapshot with id 25" + + devlink region read $DL_HANDLE/dummy snapshot 25 addr 0 len 1 >> /dev/null + check_err $? "Failed to read snapshot with id 25 (1 byte)" + + devlink region read $DL_HANDLE/dummy snapshot 25 addr 128 len 128 >> /dev/null + check_err $? "Failed to read snapshot with id 25 (128 bytes)" + + devlink region read $DL_HANDLE/dummy snapshot 25 addr 128 len $((1<<32)) >> /dev/null + check_err $? "Failed to read snapshot with id 25 (oversized)" + + devlink region read $DL_HANDLE/dummy snapshot 25 addr $((1<<32)) len 128 >> /dev/null 2>&1 + check_fail $? "Bad read of snapshot with id 25 did not fail" + + devlink region del $DL_HANDLE/dummy snapshot 25 + check_err $? "Failed to delete snapshot with id 25" + + check_region_snapshot_count dummy post-second-delete 2 + + sid=$(devlink -j region new $DL_HANDLE/dummy | jq '.[][][][]') + check_err $? "Failed to create a new snapshot with id allocated by the kernel" + + check_region_snapshot_count dummy post-first-request 3 + + devlink region dump $DL_HANDLE/dummy snapshot $sid >> /dev/null + check_err $? "Failed to dump a snapshot with id allocated by the kernel" + + devlink region del $DL_HANDLE/dummy snapshot $sid + check_err $? "Failed to delete snapshot with id allocated by the kernel" + + check_region_snapshot_count dummy post-first-request 2 + + log_test "regions test" +} + +reload_test() +{ + RET=0 + + devlink dev reload $DL_HANDLE + check_err $? "Failed to reload" + + echo "y"> $DEBUGFS_DIR/fail_reload + check_err $? "Failed to setup devlink reload to fail" + + devlink dev reload $DL_HANDLE + check_fail $? "Unexpected success of devlink reload" + + echo "n"> $DEBUGFS_DIR/fail_reload + check_err $? "Failed to setup devlink reload not to fail" + + devlink dev reload $DL_HANDLE + check_err $? "Failed to reload after set not to fail" + + echo "y"> $DEBUGFS_DIR/dont_allow_reload + check_err $? "Failed to forbid devlink reload" + + devlink dev reload $DL_HANDLE + check_fail $? "Unexpected success of devlink reload" + + echo "n"> $DEBUGFS_DIR/dont_allow_reload + check_err $? "Failed to re-enable devlink reload" + + devlink dev reload $DL_HANDLE + check_err $? "Failed to reload after re-enable" + + log_test "reload test" +} + +netns_reload_test() +{ + RET=0 + + ip netns add testns1 + check_err $? "Failed add netns \"testns1\"" + ip netns add testns2 + check_err $? "Failed add netns \"testns2\"" + + devlink dev reload $DL_HANDLE netns testns1 + check_err $? "Failed to reload into netns \"testns1\"" + + devlink -N testns1 dev reload $DL_HANDLE netns testns2 + check_err $? "Failed to reload from netns \"testns1\" into netns \"testns2\"" + + ip netns del testns2 + ip netns del testns1 + + # Wait until netns async cleanup is done. + devlink_wait 2000 + + log_test "netns reload test" +} + +DUMMYDEV="dummytest" + +res_val_get() +{ + local netns=$1 + local parentname=$2 + local name=$3 + local type=$4 + + cmd_jq "devlink -N $netns resource show $DL_HANDLE -j" \ + ".[][][] | select(.name == \"$parentname\").resources[] \ + | select(.name == \"$name\").$type" +} + +resource_test() +{ + RET=0 + + ip netns add testns1 + check_err $? "Failed add netns \"testns1\"" + ip netns add testns2 + check_err $? "Failed add netns \"testns2\"" + + devlink dev reload $DL_HANDLE netns testns1 + check_err $? "Failed to reload into netns \"testns1\"" + + # Create dummy dev to add the address and routes on. + + ip -n testns1 link add name $DUMMYDEV type dummy + check_err $? "Failed create dummy device" + ip -n testns1 link set $DUMMYDEV up + check_err $? "Failed bring up dummy device" + ip -n testns1 a a 192.0.1.1/24 dev $DUMMYDEV + check_err $? "Failed add an IP address to dummy device" + + local occ=$(res_val_get testns1 IPv4 fib occ) + local limit=$((occ+1)) + + # Set fib size limit to handle one another route only. + + devlink -N testns1 resource set $DL_HANDLE path IPv4/fib size $limit + check_err $? "Failed to set IPv4/fib resource size" + local size_new=$(res_val_get testns1 IPv4 fib size_new) + [ "$size_new" -eq "$limit" ] + check_err $? "Unexpected \"size_new\" value (got $size_new, expected $limit)" + + devlink -N testns1 dev reload $DL_HANDLE + check_err $? "Failed to reload" + local size=$(res_val_get testns1 IPv4 fib size) + [ "$size" -eq "$limit" ] + check_err $? "Unexpected \"size\" value (got $size, expected $limit)" + + # Insert 2 routes, the first is going to be inserted, + # the second is expected to fail to be inserted. + + ip -n testns1 r a 192.0.2.0/24 via 192.0.1.2 + check_err $? "Failed to add route" + + ip -n testns1 r a 192.0.3.0/24 via 192.0.1.2 + check_fail $? "Unexpected successful route add over limit" + + # Now create another dummy in second network namespace and + # insert two routes. That is over the limit of the netdevsim + # instance in the first namespace. Move the netdevsim instance + # into the second namespace and expect it to fail. + + ip -n testns2 link add name $DUMMYDEV type dummy + check_err $? "Failed create dummy device" + ip -n testns2 link set $DUMMYDEV up + check_err $? "Failed bring up dummy device" + ip -n testns2 a a 192.0.1.1/24 dev $DUMMYDEV + check_err $? "Failed add an IP address to dummy device" + ip -n testns2 r a 192.0.2.0/24 via 192.0.1.2 + check_err $? "Failed to add route" + ip -n testns2 r a 192.0.3.0/24 via 192.0.1.2 + check_err $? "Failed to add route" + + devlink -N testns1 dev reload $DL_HANDLE netns testns2 + check_fail $? "Unexpected successful reload from netns \"testns1\" into netns \"testns2\"" + + devlink -N testns2 resource set $DL_HANDLE path IPv4/fib size ' -1' + check_err $? "Failed to reset IPv4/fib resource size" + + devlink -N testns2 dev reload $DL_HANDLE netns 1 + check_err $? "Failed to reload devlink back" + + ip netns del testns2 + ip netns del testns1 + + # Wait until netns async cleanup is done. + devlink_wait 2000 + + log_test "resource test" +} + +info_get() +{ + local name=$1 + + cmd_jq "devlink dev info $DL_HANDLE -j" ".[][][\"$name\"]" "-e" +} + +dev_info_test() +{ + RET=0 + + driver=$(info_get "driver") + check_err $? "Failed to get driver name" + [ "$driver" == "netdevsim" ] + check_err $? "Unexpected driver name $driver" + + log_test "dev_info test" +} + +empty_reporter_test() +{ + RET=0 + + devlink health show $DL_HANDLE reporter empty >/dev/null + check_err $? "Failed show empty reporter" + + devlink health dump show $DL_HANDLE reporter empty >/dev/null + check_err $? "Failed show dump of empty reporter" + + devlink health diagnose $DL_HANDLE reporter empty >/dev/null + check_err $? "Failed diagnose empty reporter" + + devlink health recover $DL_HANDLE reporter empty + check_err $? "Failed recover empty reporter" + + log_test "empty reporter test" +} + +check_reporter_info() +{ + local name=$1 + local expected_state=$2 + local expected_error=$3 + local expected_recover=$4 + local expected_grace_period=$5 + local expected_auto_recover=$6 + + local show=$(devlink health show $DL_HANDLE reporter $name -j | jq -e -r ".[][][]") + check_err $? "Failed show $name reporter" + + local state=$(echo $show | jq -r ".state") + [ "$state" == "$expected_state" ] + check_err $? "Unexpected \"state\" value (got $state, expected $expected_state)" + + local error=$(echo $show | jq -r ".error") + [ "$error" == "$expected_error" ] + check_err $? "Unexpected \"error\" value (got $error, expected $expected_error)" + + local recover=`echo $show | jq -r ".recover"` + [ "$recover" == "$expected_recover" ] + check_err $? "Unexpected \"recover\" value (got $recover, expected $expected_recover)" + + local grace_period=$(echo $show | jq -r ".grace_period") + check_err $? "Failed get $name reporter grace_period" + [ "$grace_period" == "$expected_grace_period" ] + check_err $? "Unexpected \"grace_period\" value (got $grace_period, expected $expected_grace_period)" + + local auto_recover=$(echo $show | jq -r ".auto_recover") + [ "$auto_recover" == "$expected_auto_recover" ] + check_err $? "Unexpected \"auto_recover\" value (got $auto_recover, expected $expected_auto_recover)" +} + +dummy_reporter_test() +{ + RET=0 + + check_reporter_info dummy healthy 0 0 0 true + + devlink health set $DL_HANDLE reporter dummy auto_recover false + check_err $? "Failed to dummy reporter auto_recover option" + + check_reporter_info dummy healthy 0 0 0 false + + local BREAK_MSG="foo bar" + echo "$BREAK_MSG"> $DEBUGFS_DIR/health/break_health + check_err $? "Failed to break dummy reporter" + + check_reporter_info dummy error 1 0 0 false + + local dump=$(devlink health dump show $DL_HANDLE reporter dummy -j) + check_err $? "Failed show dump of dummy reporter" + + local dump_break_msg=$(echo $dump | jq -r ".break_message") + [ "$dump_break_msg" == "$BREAK_MSG" ] + check_err $? "Unexpected dump break message value (got $dump_break_msg, expected $BREAK_MSG)" + + devlink health dump clear $DL_HANDLE reporter dummy + check_err $? "Failed clear dump of dummy reporter" + + devlink health recover $DL_HANDLE reporter dummy + check_err $? "Failed recover dummy reporter" + + check_reporter_info dummy healthy 1 1 0 false + + devlink health set $DL_HANDLE reporter dummy auto_recover true + check_err $? "Failed to dummy reporter auto_recover option" + + check_reporter_info dummy healthy 1 1 0 true + + echo "$BREAK_MSG"> $DEBUGFS_DIR/health/break_health + check_err $? "Failed to break dummy reporter" + + check_reporter_info dummy healthy 2 2 0 true + + local diagnose=$(devlink health diagnose $DL_HANDLE reporter dummy -j -p) + check_err $? "Failed show diagnose of dummy reporter" + + local rcvrd_break_msg=$(echo $diagnose | jq -r ".recovered_break_message") + [ "$rcvrd_break_msg" == "$BREAK_MSG" ] + check_err $? "Unexpected recovered break message value (got $rcvrd_break_msg, expected $BREAK_MSG)" + + devlink health set $DL_HANDLE reporter dummy grace_period 10 + check_err $? "Failed to dummy reporter grace_period option" + + check_reporter_info dummy healthy 2 2 10 true + + echo "Y"> $DEBUGFS_DIR/health/fail_recover + check_err $? "Failed set dummy reporter recovery to fail" + + echo "$BREAK_MSG"> $DEBUGFS_DIR/health/break_health + check_fail $? "Unexpected success of dummy reporter break" + + check_reporter_info dummy error 3 2 10 true + + devlink health recover $DL_HANDLE reporter dummy + check_fail $? "Unexpected success of dummy reporter recover" + + echo "N"> $DEBUGFS_DIR/health/fail_recover + check_err $? "Failed set dummy reporter recovery to be successful" + + devlink health recover $DL_HANDLE reporter dummy + check_err $? "Failed recover dummy reporter" + + check_reporter_info dummy healthy 3 3 10 true + + echo 8192 > $DEBUGFS_DIR/health/binary_len + check_err $? "Failed set dummy reporter binary len to 8192" + + local dump=$(devlink health dump show $DL_HANDLE reporter dummy -j) + check_err $? "Failed show dump of dummy reporter" + + devlink health dump clear $DL_HANDLE reporter dummy + check_err $? "Failed clear dump of dummy reporter" + + log_test "dummy reporter test" +} + +rate_leafs_get() +{ + local handle=$1 + + cmd_jq "devlink port function rate show -j" \ + '.[] | to_entries | .[] | select(.value.type == "leaf") | .key | select(contains("'$handle'"))' +} + +rate_nodes_get() +{ + local handle=$1 + + cmd_jq "devlink port function rate show -j" \ + '.[] | to_entries | .[] | select(.value.type == "node") | .key | select(contains("'$handle'"))' +} + +rate_attr_set() +{ + local handle=$1 + local name=$2 + local value=$3 + local units=$4 + + devlink port function rate set $handle $name $value$units +} + +rate_attr_get() +{ + local handle=$1 + local name=$2 + + cmd_jq "devlink port function rate show $handle -j" '.[][].'$name +} + +rate_attr_tx_rate_check() +{ + local handle=$1 + local name=$2 + local rate=$3 + local debug_file=$4 + + rate_attr_set $handle $name $rate mbit + check_err $? "Failed to set $name value" + + local debug_value=$(cat $debug_file) + check_err $? "Failed to read $name value from debugfs" + [ "$debug_value" == "$rate" ] + check_err $? "Unexpected $name debug value $debug_value != $rate" + + local api_value=$(( $(rate_attr_get $handle $name) * 8 / 1000000 )) + check_err $? "Failed to get $name attr value" + [ "$api_value" == "$rate" ] + check_err $? "Unexpected $name attr value $api_value != $rate" +} + +rate_attr_parent_check() +{ + local handle=$1 + local parent=$2 + local debug_file=$3 + + rate_attr_set $handle parent $parent + check_err $? "Failed to set parent" + + debug_value=$(cat $debug_file) + check_err $? "Failed to get parent debugfs value" + [ "$debug_value" == "$parent" ] + check_err $? "Unexpected parent debug value $debug_value != $parent" + + api_value=$(rate_attr_get $r_obj parent) + check_err $? "Failed to get parent attr value" + [ "$api_value" == "$parent" ] + check_err $? "Unexpected parent attr value $api_value != $parent" +} + +rate_node_add() +{ + local handle=$1 + + devlink port function rate add $handle +} + +rate_node_del() +{ + local handle=$1 + + devlink port function rate del $handle +} + +rate_test() +{ + RET=0 + + echo $VF_COUNT > /sys/bus/netdevsim/devices/$DEV_NAME/sriov_numvfs + devlink dev eswitch set $DL_HANDLE mode switchdev + local leafs=`rate_leafs_get $DL_HANDLE` + local num_leafs=`echo $leafs | wc -w` + [ "$num_leafs" == "$VF_COUNT" ] + check_err $? "Expected $VF_COUNT rate leafs but got $num_leafs" + + rate=10 + for r_obj in $leafs + do + rate_attr_tx_rate_check $r_obj tx_share $rate \ + $DEBUGFS_DIR/ports/${r_obj##*/}/tx_share + rate=$(($rate+10)) + done + + rate=100 + for r_obj in $leafs + do + rate_attr_tx_rate_check $r_obj tx_max $rate \ + $DEBUGFS_DIR/ports/${r_obj##*/}/tx_max + rate=$(($rate+100)) + done + + local node1_name='group1' + local node1="$DL_HANDLE/$node1_name" + rate_node_add "$node1" + check_err $? "Failed to add node $node1" + + local num_nodes=`rate_nodes_get $DL_HANDLE | wc -w` + [ $num_nodes == 1 ] + check_err $? "Expected 1 rate node in output but got $num_nodes" + + local node_tx_share=10 + rate_attr_tx_rate_check $node1 tx_share $node_tx_share \ + $DEBUGFS_DIR/rate_nodes/${node1##*/}/tx_share + + local node_tx_max=100 + rate_attr_tx_rate_check $node1 tx_max $node_tx_max \ + $DEBUGFS_DIR/rate_nodes/${node1##*/}/tx_max + + rate_node_del "$node1" + check_err $? "Failed to delete node $node1" + local num_nodes=`rate_nodes_get $DL_HANDLE | wc -w` + [ $num_nodes == 0 ] + check_err $? "Expected 0 rate node but got $num_nodes" + + local node1_name='group1' + local node1="$DL_HANDLE/$node1_name" + rate_node_add "$node1" + check_err $? "Failed to add node $node1" + + rate_attr_parent_check $r_obj $node1_name \ + $DEBUGFS_DIR/ports/${r_obj##*/}/rate_parent + + local node2_name='group2' + local node2="$DL_HANDLE/$node2_name" + rate_node_add "$node2" + check_err $? "Failed to add node $node2" + + rate_attr_parent_check $node2 $node1_name \ + $DEBUGFS_DIR/rate_nodes/$node2_name/rate_parent + rate_node_del "$node2" + check_err $? "Failed to delete node $node2" + rate_attr_set "$r_obj" noparent + check_err $? "Failed to unset $r_obj parent node" + rate_node_del "$node1" + check_err $? "Failed to delete node $node1" + + log_test "rate test" +} + +setup_prepare() +{ + modprobe netdevsim + echo "$BUS_ADDR $PORT_COUNT" > /sys/bus/netdevsim/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done +} + +cleanup() +{ + pre_cleanup + echo "$BUS_ADDR" > /sys/bus/netdevsim/del_device + modprobe -r netdevsim +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink_in_netns.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink_in_netns.sh new file mode 100755 index 0000000000..7effd35369 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/devlink_in_netns.sh @@ -0,0 +1,72 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS="check_devlink_test check_ports_test" +NUM_NETIFS=0 +source $lib_dir/lib.sh + +BUS_ADDR=10 +PORT_COUNT=4 +DEV_NAME=netdevsim$BUS_ADDR +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV_NAME/net/ +DL_HANDLE=netdevsim/$DEV_NAME +NETNS_NAME=testns1 + +port_netdev_get() +{ + local port_index=$1 + + cmd_jq "devlink -N $NETNS_NAME port show -j" \ + ".[][\"$DL_HANDLE/$port_index\"].netdev" "-e" +} + +check_ports_test() +{ + RET=0 + + for i in $(seq 0 $(expr $PORT_COUNT - 1)); do + netdev_name=$(port_netdev_get $i) + check_err $? "Failed to get netdev name for port $DL_HANDLE/$i" + ip -n $NETNS_NAME link show $netdev_name &> /dev/null + check_err $? "Failed to find netdev $netdev_name" + done + + log_test "check ports test" +} + +check_devlink_test() +{ + RET=0 + + devlink -N $NETNS_NAME dev show $DL_HANDLE &> /dev/null + check_err $? "Failed to show devlink instance" + + log_test "check devlink test" +} + +setup_prepare() +{ + modprobe netdevsim + ip netns add $NETNS_NAME + ip netns exec $NETNS_NAME \ + echo "$BUS_ADDR $PORT_COUNT" > /sys/bus/netdevsim/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done +} + +cleanup() +{ + pre_cleanup + echo "$BUS_ADDR" > /sys/bus/netdevsim/del_device + ip netns del $NETNS_NAME + modprobe -r netdevsim +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh new file mode 100755 index 0000000000..b64d98ca0d --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh @@ -0,0 +1,514 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test is for checking devlink-trap functionality. It makes use of +# netdevsim which implements the required callbacks. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + init_test + trap_action_test + trap_metadata_test + bad_trap_test + bad_trap_action_test + trap_stats_test + trap_group_action_test + bad_trap_group_test + trap_group_stats_test + trap_policer_test + trap_policer_bind_test + port_del_test + dev_del_test +" +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/ +SLEEP_TIME=1 +NETDEV="" +NUM_NETIFS=0 +source $lib_dir/lib.sh + +DEVLINK_DEV= +source $lib_dir/devlink_lib.sh +DEVLINK_DEV=netdevsim/${DEV} + +require_command udevadm + +modprobe netdevsim &> /dev/null +if [ ! -d "$NETDEVSIM_PATH" ]; then + echo "SKIP: No netdevsim support" + exit 1 +fi + +if [ -d "${NETDEVSIM_PATH}/devices/netdevsim${DEV_ADDR}" ]; then + echo "SKIP: Device netdevsim${DEV_ADDR} already exists" + exit 1 +fi + +check_netdev_down() +{ + state=$(cat /sys/class/net/${NETDEV}/flags) + + if [ $((state & 1)) -ne 0 ]; then + echo "WARNING: unexpected interface UP, disable NetworkManager?" + + ip link set dev $NETDEV down + fi +} + +init_test() +{ + RET=0 + + test $(devlink_traps_num_get) -ne 0 + check_err $? "No traps were registered" + + log_test "Initialization" +} + +trap_action_test() +{ + local orig_action + local trap_name + local action + + RET=0 + + for trap_name in $(devlink_traps_get); do + # The action of non-drop traps cannot be changed. + if [ $(devlink_trap_type_get $trap_name) = "drop" ]; then + devlink_trap_action_set $trap_name "trap" + action=$(devlink_trap_action_get $trap_name) + if [ $action != "trap" ]; then + check_err 1 "Trap $trap_name did not change action to trap" + fi + + devlink_trap_action_set $trap_name "drop" + action=$(devlink_trap_action_get $trap_name) + if [ $action != "drop" ]; then + check_err 1 "Trap $trap_name did not change action to drop" + fi + else + orig_action=$(devlink_trap_action_get $trap_name) + + devlink_trap_action_set $trap_name "trap" + action=$(devlink_trap_action_get $trap_name) + if [ $action != $orig_action ]; then + check_err 1 "Trap $trap_name changed action when should not" + fi + + devlink_trap_action_set $trap_name "drop" + action=$(devlink_trap_action_get $trap_name) + if [ $action != $orig_action ]; then + check_err 1 "Trap $trap_name changed action when should not" + fi + fi + done + + log_test "Trap action" +} + +trap_metadata_test() +{ + local trap_name + + RET=0 + + for trap_name in $(devlink_traps_get); do + devlink_trap_metadata_test $trap_name "input_port" + check_err $? "Input port not reported as metadata of trap $trap_name" + if [ $trap_name == "ingress_flow_action_drop" ] || + [ $trap_name == "egress_flow_action_drop" ]; then + devlink_trap_metadata_test $trap_name "flow_action_cookie" + check_err $? "Flow action cookie not reported as metadata of trap $trap_name" + fi + done + + log_test "Trap metadata" +} + +bad_trap_test() +{ + RET=0 + + devlink_trap_action_set "made_up_trap" "drop" + check_fail $? "Did not get an error for non-existing trap" + + log_test "Non-existing trap" +} + +bad_trap_action_test() +{ + local traps_arr + local trap_name + + RET=0 + + # Pick first trap. + traps_arr=($(devlink_traps_get)) + trap_name=${traps_arr[0]} + + devlink_trap_action_set $trap_name "made_up_action" + check_fail $? "Did not get an error for non-existing trap action" + + log_test "Non-existing trap action" +} + +trap_stats_test() +{ + local trap_name + + RET=0 + + check_netdev_down + for trap_name in $(devlink_traps_get); do + devlink_trap_stats_idle_test $trap_name + check_err $? "Stats of trap $trap_name not idle when netdev down" + + ip link set dev $NETDEV up + + if [ $(devlink_trap_type_get $trap_name) = "drop" ]; then + devlink_trap_action_set $trap_name "trap" + devlink_trap_stats_idle_test $trap_name + check_fail $? "Stats of trap $trap_name idle when action is trap" + + devlink_trap_action_set $trap_name "drop" + devlink_trap_stats_idle_test $trap_name + check_err $? "Stats of trap $trap_name not idle when action is drop" + + echo "y"> $DEBUGFS_DIR/fail_trap_drop_counter_get + devlink -s trap show $DEVLINK_DEV trap $trap_name &> /dev/null + check_fail $? "Managed to read trap (hard dropped) statistics when should not" + echo "n"> $DEBUGFS_DIR/fail_trap_drop_counter_get + devlink -s trap show $DEVLINK_DEV trap $trap_name &> /dev/null + check_err $? "Did not manage to read trap (hard dropped) statistics when should" + + devlink_trap_drop_stats_idle_test $trap_name + check_fail $? "Drop stats of trap $trap_name idle when should not" + else + devlink_trap_stats_idle_test $trap_name + check_fail $? "Stats of non-drop trap $trap_name idle when should not" + fi + + ip link set dev $NETDEV down + done + + log_test "Trap statistics" +} + +trap_group_action_test() +{ + local curr_group group_name + local trap_name + local trap_type + local action + + RET=0 + + for group_name in $(devlink_trap_groups_get); do + devlink_trap_group_action_set $group_name "trap" + + for trap_name in $(devlink_traps_get); do + curr_group=$(devlink_trap_group_get $trap_name) + if [ $curr_group != $group_name ]; then + continue + fi + + trap_type=$(devlink_trap_type_get $trap_name) + if [ $trap_type != "drop" ]; then + continue + fi + + action=$(devlink_trap_action_get $trap_name) + if [ $action != "trap" ]; then + check_err 1 "Trap $trap_name did not change action to trap" + fi + done + + devlink_trap_group_action_set $group_name "drop" + + for trap_name in $(devlink_traps_get); do + curr_group=$(devlink_trap_group_get $trap_name) + if [ $curr_group != $group_name ]; then + continue + fi + + trap_type=$(devlink_trap_type_get $trap_name) + if [ $trap_type != "drop" ]; then + continue + fi + + action=$(devlink_trap_action_get $trap_name) + if [ $action != "drop" ]; then + check_err 1 "Trap $trap_name did not change action to drop" + fi + done + done + + log_test "Trap group action" +} + +bad_trap_group_test() +{ + RET=0 + + devlink_trap_group_action_set "made_up_trap_group" "drop" + check_fail $? "Did not get an error for non-existing trap group" + + log_test "Non-existing trap group" +} + +trap_group_stats_test() +{ + local group_name + + RET=0 + + check_netdev_down + for group_name in $(devlink_trap_groups_get); do + devlink_trap_group_stats_idle_test $group_name + check_err $? "Stats of trap group $group_name not idle when netdev down" + + ip link set dev $NETDEV up + + devlink_trap_group_action_set $group_name "trap" + devlink_trap_group_stats_idle_test $group_name + check_fail $? "Stats of trap group $group_name idle when action is trap" + + devlink_trap_group_action_set $group_name "drop" + ip link set dev $NETDEV down + done + + log_test "Trap group statistics" +} + +trap_policer_test() +{ + local packets_t0 + local packets_t1 + + RET=0 + + if [ $(devlink_trap_policers_num_get) -eq 0 ]; then + check_err 1 "Failed to dump policers" + fi + + devlink trap policer set $DEVLINK_DEV policer 1337 &> /dev/null + check_fail $? "Did not get an error for setting a non-existing policer" + devlink trap policer show $DEVLINK_DEV policer 1337 &> /dev/null + check_fail $? "Did not get an error for getting a non-existing policer" + + devlink trap policer set $DEVLINK_DEV policer 1 rate 2000 burst 16 + check_err $? "Failed to set valid parameters for a valid policer" + if [ $(devlink_trap_policer_rate_get 1) -ne 2000 ]; then + check_err 1 "Policer rate was not changed" + fi + if [ $(devlink_trap_policer_burst_get 1) -ne 16 ]; then + check_err 1 "Policer burst size was not changed" + fi + + devlink trap policer set $DEVLINK_DEV policer 1 rate 0 &> /dev/null + check_fail $? "Policer rate was changed to rate lower than limit" + devlink trap policer set $DEVLINK_DEV policer 1 rate 9000 &> /dev/null + check_fail $? "Policer rate was changed to rate higher than limit" + devlink trap policer set $DEVLINK_DEV policer 1 burst 2 &> /dev/null + check_fail $? "Policer burst size was changed to burst size lower than limit" + devlink trap policer set $DEVLINK_DEV policer 1 rate 65537 &> /dev/null + check_fail $? "Policer burst size was changed to burst size higher than limit" + echo "y" > $DEBUGFS_DIR/fail_trap_policer_set + devlink trap policer set $DEVLINK_DEV policer 1 rate 3000 &> /dev/null + check_fail $? "Managed to set policer rate when should not" + echo "n" > $DEBUGFS_DIR/fail_trap_policer_set + if [ $(devlink_trap_policer_rate_get 1) -ne 2000 ]; then + check_err 1 "Policer rate was changed to an invalid value" + fi + if [ $(devlink_trap_policer_burst_get 1) -ne 16 ]; then + check_err 1 "Policer burst size was changed to an invalid value" + fi + + packets_t0=$(devlink_trap_policer_rx_dropped_get 1) + sleep .5 + packets_t1=$(devlink_trap_policer_rx_dropped_get 1) + if [ ! $packets_t1 -gt $packets_t0 ]; then + check_err 1 "Policer drop counter was not incremented" + fi + + echo "y"> $DEBUGFS_DIR/fail_trap_policer_counter_get + devlink -s trap policer show $DEVLINK_DEV policer 1 &> /dev/null + check_fail $? "Managed to read policer drop counter when should not" + echo "n"> $DEBUGFS_DIR/fail_trap_policer_counter_get + devlink -s trap policer show $DEVLINK_DEV policer 1 &> /dev/null + check_err $? "Did not manage to read policer drop counter when should" + + log_test "Trap policer" +} + +trap_group_check_policer() +{ + local group_name=$1; shift + + devlink -j -p trap group show $DEVLINK_DEV group $group_name \ + | jq -e '.[][][]["policer"]' &> /dev/null +} + +trap_policer_bind_test() +{ + RET=0 + + devlink trap group set $DEVLINK_DEV group l2_drops policer 1 + check_err $? "Failed to bind a valid policer" + if [ $(devlink_trap_group_policer_get "l2_drops") -ne 1 ]; then + check_err 1 "Bound policer was not changed" + fi + + devlink trap group set $DEVLINK_DEV group l2_drops policer 1337 \ + &> /dev/null + check_fail $? "Did not get an error for binding a non-existing policer" + if [ $(devlink_trap_group_policer_get "l2_drops") -ne 1 ]; then + check_err 1 "Bound policer was changed when should not" + fi + + devlink trap group set $DEVLINK_DEV group l2_drops policer 0 + check_err $? "Failed to unbind a policer when using ID 0" + trap_group_check_policer "l2_drops" + check_fail $? "Trap group has a policer after unbinding with ID 0" + + devlink trap group set $DEVLINK_DEV group l2_drops policer 1 + check_err $? "Failed to bind a valid policer" + + devlink trap group set $DEVLINK_DEV group l2_drops nopolicer + check_err $? "Failed to unbind a policer when using 'nopolicer' keyword" + trap_group_check_policer "l2_drops" + check_fail $? "Trap group has a policer after unbinding with 'nopolicer' keyword" + + devlink trap group set $DEVLINK_DEV group l2_drops policer 1 + check_err $? "Failed to bind a valid policer" + + echo "y"> $DEBUGFS_DIR/fail_trap_group_set + devlink trap group set $DEVLINK_DEV group l2_drops policer 2 \ + &> /dev/null + check_fail $? "Managed to bind a policer when should not" + echo "n"> $DEBUGFS_DIR/fail_trap_group_set + devlink trap group set $DEVLINK_DEV group l2_drops policer 2 + check_err $? "Did not manage to bind a policer when should" + + devlink trap group set $DEVLINK_DEV group l2_drops action drop \ + policer 1337 &> /dev/null + check_fail $? "Did not get an error for partially modified trap group" + + log_test "Trap policer binding" +} + +port_del_test() +{ + local group_name + local i + + # The test never fails. It is meant to exercise different code paths + # and make sure we properly dismantle a port while packets are + # in-flight. + RET=0 + + devlink_traps_enable_all + + for i in $(seq 1 10); do + ip link set dev $NETDEV up + + sleep $SLEEP_TIME + + netdevsim_port_destroy + netdevsim_port_create + udevadm settle + done + + devlink_traps_disable_all + + log_test "Port delete" +} + +dev_del_test() +{ + local group_name + local i + + # The test never fails. It is meant to exercise different code paths + # and make sure we properly unregister traps while packets are + # in-flight. + RET=0 + + devlink_traps_enable_all + + for i in $(seq 1 10); do + ip link set dev $NETDEV up + + sleep $SLEEP_TIME + + cleanup + setup_prepare + done + + devlink_traps_disable_all + + log_test "Device delete" +} + +netdevsim_dev_create() +{ + echo "$DEV_ADDR 0" > ${NETDEVSIM_PATH}/new_device +} + +netdevsim_dev_destroy() +{ + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device +} + +netdevsim_port_create() +{ + echo 1 > ${NETDEVSIM_PATH}/devices/${DEV}/new_port +} + +netdevsim_port_destroy() +{ + echo 1 > ${NETDEVSIM_PATH}/devices/${DEV}/del_port +} + +setup_prepare() +{ + local netdev + + netdevsim_dev_create + + if [ ! -d "${NETDEVSIM_PATH}/devices/${DEV}" ]; then + echo "Failed to create netdevsim device" + exit 1 + fi + + netdevsim_port_create + + if [ ! -d "${NETDEVSIM_PATH}/devices/${DEV}/net/" ]; then + echo "Failed to create netdevsim port" + exit 1 + fi + + # Wait for udev to rename newly created netdev. + udevadm settle + + NETDEV=$(ls ${NETDEVSIM_PATH}/devices/${DEV}/net/) +} + +cleanup() +{ + pre_cleanup + netdevsim_port_destroy + netdevsim_dev_destroy +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh new file mode 100755 index 0000000000..9adfba8f87 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh @@ -0,0 +1,132 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +function get_value { + local query="${SETTINGS_MAP[$1]}" + + echo $(ethtool -c $NSIM_NETDEV | \ + awk -F':' -v pattern="$query:" '$0 ~ pattern {gsub(/[ \t]/, "", $2); print $2}') +} + +function update_current_settings { + for key in ${!SETTINGS_MAP[@]}; do + CURRENT_SETTINGS[$key]=$(get_value $key) + done + echo ${CURRENT_SETTINGS[@]} +} + +if ! ethtool -h | grep -q coalesce; then + echo "SKIP: No --coalesce support in ethtool" + exit 4 +fi + +NSIM_NETDEV=$(make_netdev) + +set -o pipefail + +declare -A SETTINGS_MAP=( + ["rx-frames-low"]="rx-frame-low" + ["tx-frames-low"]="tx-frame-low" + ["rx-frames-high"]="rx-frame-high" + ["tx-frames-high"]="tx-frame-high" + ["rx-usecs"]="rx-usecs" + ["rx-frames"]="rx-frames" + ["rx-usecs-irq"]="rx-usecs-irq" + ["rx-frames-irq"]="rx-frames-irq" + ["tx-usecs"]="tx-usecs" + ["tx-frames"]="tx-frames" + ["tx-usecs-irq"]="tx-usecs-irq" + ["tx-frames-irq"]="tx-frames-irq" + ["stats-block-usecs"]="stats-block-usecs" + ["pkt-rate-low"]="pkt-rate-low" + ["rx-usecs-low"]="rx-usecs-low" + ["tx-usecs-low"]="tx-usecs-low" + ["pkt-rate-high"]="pkt-rate-high" + ["rx-usecs-high"]="rx-usecs-high" + ["tx-usecs-high"]="tx-usecs-high" + ["sample-interval"]="sample-interval" +) + +declare -A CURRENT_SETTINGS=( + ["rx-frames-low"]="" + ["tx-frames-low"]="" + ["rx-frames-high"]="" + ["tx-frames-high"]="" + ["rx-usecs"]="" + ["rx-frames"]="" + ["rx-usecs-irq"]="" + ["rx-frames-irq"]="" + ["tx-usecs"]="" + ["tx-frames"]="" + ["tx-usecs-irq"]="" + ["tx-frames-irq"]="" + ["stats-block-usecs"]="" + ["pkt-rate-low"]="" + ["rx-usecs-low"]="" + ["tx-usecs-low"]="" + ["pkt-rate-high"]="" + ["rx-usecs-high"]="" + ["tx-usecs-high"]="" + ["sample-interval"]="" +) + +declare -A EXPECTED_SETTINGS=( + ["rx-frames-low"]="" + ["tx-frames-low"]="" + ["rx-frames-high"]="" + ["tx-frames-high"]="" + ["rx-usecs"]="" + ["rx-frames"]="" + ["rx-usecs-irq"]="" + ["rx-frames-irq"]="" + ["tx-usecs"]="" + ["tx-frames"]="" + ["tx-usecs-irq"]="" + ["tx-frames-irq"]="" + ["stats-block-usecs"]="" + ["pkt-rate-low"]="" + ["rx-usecs-low"]="" + ["tx-usecs-low"]="" + ["pkt-rate-high"]="" + ["rx-usecs-high"]="" + ["tx-usecs-high"]="" + ["sample-interval"]="" +) + +# populate the expected settings map +for key in ${!SETTINGS_MAP[@]}; do + EXPECTED_SETTINGS[$key]=$(get_value $key) +done + +# test +for key in ${!SETTINGS_MAP[@]}; do + value=$((RANDOM % $((2**32-1)))) + + ethtool -C $NSIM_NETDEV "$key" "$value" + + EXPECTED_SETTINGS[$key]="$value" + expected=${EXPECTED_SETTINGS[@]} + current=$(update_current_settings) + + check $? "$current" "$expected" + set +x +done + +# bool settings which ethtool displays on the same line +ethtool -C $NSIM_NETDEV adaptive-rx on +s=$(ethtool -c $NSIM_NETDEV | grep -q "Adaptive RX: on TX: off") +check $? "$s" "" + +ethtool -C $NSIM_NETDEV adaptive-tx on +s=$(ethtool -c $NSIM_NETDEV | grep -q "Adaptive RX: on TX: on") +check $? "$s" "" + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh new file mode 100644 index 0000000000..922744059a --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh @@ -0,0 +1,56 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +NSIM_ID=$((RANDOM % 1024)) +NSIM_DEV_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_ID +NSIM_DEV_DFS=/sys/kernel/debug/netdevsim/netdevsim$NSIM_ID/ports/0 +NSIM_NETDEV= +num_passes=0 +num_errors=0 + +function cleanup_nsim { + if [ -e $NSIM_DEV_SYS ]; then + echo $NSIM_ID > /sys/bus/netdevsim/del_device + fi +} + +function cleanup { + cleanup_nsim +} + +trap cleanup EXIT + +function check { + local code=$1 + local str=$2 + local exp_str=$3 + local exp_fail=$4 + + [ -z "$exp_fail" ] && cop="-ne" || cop="-eq" + + if [ $code $cop 0 ]; then + ((num_errors++)) + return + fi + + if [ "$str" != "$exp_str" ]; then + echo -e "Expected: '$exp_str', got '$str'" + ((num_errors++)) + return + fi + + ((num_passes++)) +} + +function make_netdev { + # Make a netdevsim + old_netdevs=$(ls /sys/class/net) + + if ! $(lsmod | grep -q netdevsim); then + modprobe netdevsim + fi + + echo $NSIM_ID $@ > /sys/bus/netdevsim/new_device + # get new device name + ls /sys/bus/netdevsim/devices/netdevsim${NSIM_ID}/net/ +} diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh new file mode 100755 index 0000000000..0c56746e9c --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh @@ -0,0 +1,110 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +NSIM_NETDEV=$(make_netdev) +[ a$ETHTOOL == a ] && ETHTOOL=ethtool + +set -o pipefail + +# netdevsim starts out with None/None +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "Configured FEC encodings: None +Active FEC encoding: None" + +# Test Auto +$ETHTOOL --set-fec $NSIM_NETDEV encoding auto +check $? +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "Configured FEC encodings: Auto +Active FEC encoding: Off" + +# Test case in-sensitivity +for o in off Off OFF; do + $ETHTOOL --set-fec $NSIM_NETDEV encoding $o + check $? + s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) + check $? "$s" "Configured FEC encodings: Off +Active FEC encoding: Off" +done + +for o in BaseR baser BAser; do + $ETHTOOL --set-fec $NSIM_NETDEV encoding $o + check $? + s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) + check $? "$s" "Configured FEC encodings: BaseR +Active FEC encoding: BaseR" +done + +for o in llrs rs; do + $ETHTOOL --set-fec $NSIM_NETDEV encoding $o + check $? + s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) + check $? "$s" "Configured FEC encodings: ${o^^} +Active FEC encoding: ${o^^}" +done + +# Test mutliple bits +$ETHTOOL --set-fec $NSIM_NETDEV encoding rs llrs +check $? +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "Configured FEC encodings: RS LLRS +Active FEC encoding: LLRS" + +$ETHTOOL --set-fec $NSIM_NETDEV encoding rs off auto +check $? +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "Configured FEC encodings: Auto Off RS +Active FEC encoding: RS" + +# Make sure other link modes are rejected +$ETHTOOL --set-fec $NSIM_NETDEV encoding FIBRE 2>/dev/null +check $? '' '' 1 + +$ETHTOOL --set-fec $NSIM_NETDEV encoding bla-bla-bla 2>/dev/null +check $? '' '' 1 + +# Try JSON +$ETHTOOL --json --show-fec $NSIM_NETDEV | jq empty >>/dev/null 2>&1 +if [ $? -eq 0 ]; then + $ETHTOOL --set-fec $NSIM_NETDEV encoding auto + check $? + + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].config[]') + check $? "$s" '"Auto"' + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].active[]') + check $? "$s" '"Off"' + + $ETHTOOL --set-fec $NSIM_NETDEV encoding auto RS + check $? + + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].config[]') + check $? "$s" '"Auto" +"RS"' + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].active[]') + check $? "$s" '"RS"' +fi + +# Test error injection +echo 11 > $NSIM_DEV_DFS/ethtool/get_err + +$ETHTOOL --show-fec $NSIM_NETDEV >>/dev/null 2>&1 +check $? '' '' 1 + +echo 0 > $NSIM_DEV_DFS/ethtool/get_err +echo 11 > $NSIM_DEV_DFS/ethtool/set_err + +$ETHTOOL --show-fec $NSIM_NETDEV >>/dev/null 2>&1 +check $? + +$ETHTOOL --set-fec $NSIM_NETDEV encoding RS 2>/dev/null +check $? '' '' 1 + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh new file mode 100755 index 0000000000..b4a7abfe54 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh @@ -0,0 +1,49 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +# Bail if ethtool is too old +if ! ethtool -h | grep include-stat 2>&1 >/dev/null; then + echo "SKIP: No --include-statistics support in ethtool" + exit 4 +fi + +NSIM_NETDEV=$(make_netdev) + +set -o pipefail + +echo n > $NSIM_DEV_DFS/ethtool/pause/report_stats_tx +echo n > $NSIM_DEV_DFS/ethtool/pause/report_stats_rx + +s=$(ethtool --json -a $NSIM_NETDEV | jq '.[].statistics') +check $? "$s" "null" + +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics') +check $? "$s" "{}" + +echo y > $NSIM_DEV_DFS/ethtool/pause/report_stats_tx + +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics | length') +check $? "$s" "1" + +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics.tx_pause_frames') +check $? "$s" "2" + +echo y > $NSIM_DEV_DFS/ethtool/pause/report_stats_rx + +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics | length') +check $? "$s" "2" + +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics.rx_pause_frames') +check $? "$s" "1" +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics.tx_pause_frames') +check $? "$s" "2" + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh new file mode 100755 index 0000000000..c969559ffa --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh @@ -0,0 +1,85 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +function get_value { + local query="${SETTINGS_MAP[$1]}" + + echo $(ethtool -g $NSIM_NETDEV | \ + tail -n +$CURR_SETT_LINE | \ + awk -F':' -v pattern="$query:" '$0 ~ pattern {gsub(/[\t ]/, "", $2); print $2}') +} + +function update_current_settings { + for key in ${!SETTINGS_MAP[@]}; do + CURRENT_SETTINGS[$key]=$(get_value $key) + done + echo ${CURRENT_SETTINGS[@]} +} + +if ! ethtool -h | grep -q set-ring >/dev/null; then + echo "SKIP: No --set-ring support in ethtool" + exit 4 +fi + +NSIM_NETDEV=$(make_netdev) + +set -o pipefail + +declare -A SETTINGS_MAP=( + ["rx"]="RX" + ["rx-mini"]="RX Mini" + ["rx-jumbo"]="RX Jumbo" + ["tx"]="TX" +) + +declare -A EXPECTED_SETTINGS=( + ["rx"]="" + ["rx-mini"]="" + ["rx-jumbo"]="" + ["tx"]="" +) + +declare -A CURRENT_SETTINGS=( + ["rx"]="" + ["rx-mini"]="" + ["rx-jumbo"]="" + ["tx"]="" +) + +MAX_VALUE=$((RANDOM % $((2**32-1)))) +RING_MAX_LIST=$(ls $NSIM_DEV_DFS/ethtool/ring/) + +for ring_max_entry in $RING_MAX_LIST; do + echo $MAX_VALUE > $NSIM_DEV_DFS/ethtool/ring/$ring_max_entry +done + +CURR_SETT_LINE=$(ethtool -g $NSIM_NETDEV | grep -i -m1 -n 'Current hardware settings' | cut -f1 -d:) + +# populate the expected settings map +for key in ${!SETTINGS_MAP[@]}; do + EXPECTED_SETTINGS[$key]=$(get_value $key) +done + +# test +for key in ${!SETTINGS_MAP[@]}; do + value=$((RANDOM % $MAX_VALUE)) + + ethtool -G $NSIM_NETDEV "$key" "$value" + + EXPECTED_SETTINGS[$key]="$value" + expected=${EXPECTED_SETTINGS[@]} + current=$(update_current_settings) + + check $? "$current" "$expected" + set +x +done + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/fib.sh b/tools/testing/selftests/drivers/net/netdevsim/fib.sh new file mode 100755 index 0000000000..6800de816e --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/fib.sh @@ -0,0 +1,402 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test is for checking the FIB offload API. It makes use of netdevsim +# which registers a listener to the FIB notification chain. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + ipv4_identical_routes + ipv4_tos + ipv4_metric + ipv4_replace + ipv4_delete + ipv4_plen + ipv4_replay + ipv4_flush + ipv4_error_path + ipv4_delete_fail + ipv6_add + ipv6_metric + ipv6_append_single + ipv6_replace_single + ipv6_metric_multipath + ipv6_append_multipath + ipv6_replace_multipath + ipv6_append_multipath_to_single + ipv6_delete_single + ipv6_delete_multipath + ipv6_replay_single + ipv6_replay_multipath + ipv6_error_path + ipv6_delete_fail +" +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/ +NUM_NETIFS=0 +source $lib_dir/lib.sh +source $lib_dir/fib_offload_lib.sh + +DEVLINK_DEV= +source $lib_dir/devlink_lib.sh +DEVLINK_DEV=netdevsim/${DEV} + +ipv4_identical_routes() +{ + fib_ipv4_identical_routes_test "testns1" +} + +ipv4_tos() +{ + fib_ipv4_tos_test "testns1" +} + +ipv4_metric() +{ + fib_ipv4_metric_test "testns1" +} + +ipv4_replace() +{ + fib_ipv4_replace_test "testns1" +} + +ipv4_delete() +{ + fib_ipv4_delete_test "testns1" +} + +ipv4_plen() +{ + fib_ipv4_plen_test "testns1" +} + +ipv4_replay_metric() +{ + fib_ipv4_replay_metric_test "testns1" "$DEVLINK_DEV" +} + +ipv4_replay_tos() +{ + fib_ipv4_replay_tos_test "testns1" "$DEVLINK_DEV" +} + +ipv4_replay_plen() +{ + fib_ipv4_replay_plen_test "testns1" "$DEVLINK_DEV" +} + +ipv4_replay() +{ + ipv4_replay_metric + ipv4_replay_tos + ipv4_replay_plen +} + +ipv4_flush() +{ + fib_ipv4_flush_test "testns1" +} + +ipv4_error_path_add() +{ + local lsb + + RET=0 + + ip -n testns1 link add name dummy1 type dummy + ip -n testns1 link set dev dummy1 up + + devlink -N testns1 resource set $DEVLINK_DEV path IPv4/fib size 10 + devlink -N testns1 dev reload $DEVLINK_DEV + + for lsb in $(seq 1 20); do + ip -n testns1 route add 192.0.2.${lsb}/32 dev dummy1 \ + &> /dev/null + done + + log_test "IPv4 error path - add" + + ip -n testns1 link del dev dummy1 +} + +ipv4_error_path_replay() +{ + local lsb + + RET=0 + + ip -n testns1 link add name dummy1 type dummy + ip -n testns1 link set dev dummy1 up + + devlink -N testns1 resource set $DEVLINK_DEV path IPv4/fib size 100 + devlink -N testns1 dev reload $DEVLINK_DEV + + for lsb in $(seq 1 20); do + ip -n testns1 route add 192.0.2.${lsb}/32 dev dummy1 + done + + devlink -N testns1 resource set $DEVLINK_DEV path IPv4/fib size 10 + devlink -N testns1 dev reload $DEVLINK_DEV &> /dev/null + + log_test "IPv4 error path - replay" + + ip -n testns1 link del dev dummy1 + + # Successfully reload after deleting all the routes. + devlink -N testns1 resource set $DEVLINK_DEV path IPv4/fib size 100 + devlink -N testns1 dev reload $DEVLINK_DEV +} + +ipv4_error_path() +{ + # Test the different error paths of the notifiers by limiting the size + # of the "IPv4/fib" resource. + ipv4_error_path_add + ipv4_error_path_replay +} + +ipv4_delete_fail() +{ + RET=0 + + echo "y" > $DEBUGFS_DIR/fib/fail_route_delete + + ip -n testns1 link add name dummy1 type dummy + ip -n testns1 link set dev dummy1 up + + ip -n testns1 route add 192.0.2.0/24 dev dummy1 + ip -n testns1 route del 192.0.2.0/24 dev dummy1 &> /dev/null + + # We should not be able to delete the netdev if we are leaking a + # reference. + ip -n testns1 link del dev dummy1 + + log_test "IPv4 route delete failure" + + echo "n" > $DEBUGFS_DIR/fib/fail_route_delete +} + +ipv6_add() +{ + fib_ipv6_add_test "testns1" +} + +ipv6_metric() +{ + fib_ipv6_metric_test "testns1" +} + +ipv6_append_single() +{ + fib_ipv6_append_single_test "testns1" +} + +ipv6_replace_single() +{ + fib_ipv6_replace_single_test "testns1" +} + +ipv6_metric_multipath() +{ + fib_ipv6_metric_multipath_test "testns1" +} + +ipv6_append_multipath() +{ + fib_ipv6_append_multipath_test "testns1" +} + +ipv6_replace_multipath() +{ + fib_ipv6_replace_multipath_test "testns1" +} + +ipv6_append_multipath_to_single() +{ + fib_ipv6_append_multipath_to_single_test "testns1" +} + +ipv6_delete_single() +{ + fib_ipv6_delete_single_test "testns1" +} + +ipv6_delete_multipath() +{ + fib_ipv6_delete_multipath_test "testns1" +} + +ipv6_replay_single() +{ + fib_ipv6_replay_single_test "testns1" "$DEVLINK_DEV" +} + +ipv6_replay_multipath() +{ + fib_ipv6_replay_multipath_test "testns1" "$DEVLINK_DEV" +} + +ipv6_error_path_add_single() +{ + local lsb + + RET=0 + + ip -n testns1 link add name dummy1 type dummy + ip -n testns1 link set dev dummy1 up + + devlink -N testns1 resource set $DEVLINK_DEV path IPv6/fib size 10 + devlink -N testns1 dev reload $DEVLINK_DEV + + for lsb in $(seq 1 20); do + ip -n testns1 route add 2001:db8:1::${lsb}/128 dev dummy1 \ + &> /dev/null + done + + log_test "IPv6 error path - add single" + + ip -n testns1 link del dev dummy1 +} + +ipv6_error_path_add_multipath() +{ + local lsb + + RET=0 + + for i in $(seq 1 2); do + ip -n testns1 link add name dummy$i type dummy + ip -n testns1 link set dev dummy$i up + ip -n testns1 address add 2001:db8:$i::1/64 dev dummy$i + done + + devlink -N testns1 resource set $DEVLINK_DEV path IPv6/fib size 10 + devlink -N testns1 dev reload $DEVLINK_DEV + + for lsb in $(seq 1 20); do + ip -n testns1 route add 2001:db8:10::${lsb}/128 \ + nexthop via 2001:db8:1::2 dev dummy1 \ + nexthop via 2001:db8:2::2 dev dummy2 &> /dev/null + done + + log_test "IPv6 error path - add multipath" + + for i in $(seq 1 2); do + ip -n testns1 link del dev dummy$i + done +} + +ipv6_error_path_replay() +{ + local lsb + + RET=0 + + ip -n testns1 link add name dummy1 type dummy + ip -n testns1 link set dev dummy1 up + + devlink -N testns1 resource set $DEVLINK_DEV path IPv6/fib size 100 + devlink -N testns1 dev reload $DEVLINK_DEV + + for lsb in $(seq 1 20); do + ip -n testns1 route add 2001:db8:1::${lsb}/128 dev dummy1 + done + + devlink -N testns1 resource set $DEVLINK_DEV path IPv6/fib size 10 + devlink -N testns1 dev reload $DEVLINK_DEV &> /dev/null + + log_test "IPv6 error path - replay" + + ip -n testns1 link del dev dummy1 + + # Successfully reload after deleting all the routes. + devlink -N testns1 resource set $DEVLINK_DEV path IPv6/fib size 100 + devlink -N testns1 dev reload $DEVLINK_DEV +} + +ipv6_error_path() +{ + # Test the different error paths of the notifiers by limiting the size + # of the "IPv6/fib" resource. + ipv6_error_path_add_single + ipv6_error_path_add_multipath + ipv6_error_path_replay +} + +ipv6_delete_fail() +{ + RET=0 + + echo "y" > $DEBUGFS_DIR/fib/fail_route_delete + + ip -n testns1 link add name dummy1 type dummy + ip -n testns1 link set dev dummy1 up + + ip -n testns1 route add 2001:db8:1::/64 dev dummy1 + ip -n testns1 route del 2001:db8:1::/64 dev dummy1 &> /dev/null + + # We should not be able to delete the netdev if we are leaking a + # reference. + ip -n testns1 link del dev dummy1 + + log_test "IPv6 route delete failure" + + echo "n" > $DEBUGFS_DIR/fib/fail_route_delete +} + +fib_notify_on_flag_change_set() +{ + local notify=$1; shift + + ip netns exec testns1 sysctl -qw net.ipv4.fib_notify_on_flag_change=$notify + ip netns exec testns1 sysctl -qw net.ipv6.fib_notify_on_flag_change=$notify + + log_info "Set fib_notify_on_flag_change to $notify" +} + +setup_prepare() +{ + local netdev + + modprobe netdevsim &> /dev/null + + echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done + + ip netns add testns1 + if [ $? -ne 0 ]; then + echo "Failed to add netns \"testns1\"" + exit 1 + fi + + devlink dev reload $DEVLINK_DEV netns testns1 + if [ $? -ne 0 ]; then + echo "Failed to reload into netns \"testns1\"" + exit 1 + fi +} + +cleanup() +{ + pre_cleanup + ip netns del testns1 + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device + modprobe -r netdevsim &> /dev/null +} + +trap cleanup EXIT + +setup_prepare + +fib_notify_on_flag_change_set 1 +tests_run + +fib_notify_on_flag_change_set 0 +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh b/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh new file mode 100755 index 0000000000..8d91191a09 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh @@ -0,0 +1,430 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + ipv4_route_addition_test + ipv4_route_deletion_test + ipv4_route_replacement_test + ipv4_route_offload_failed_test + ipv6_route_addition_test + ipv6_route_deletion_test + ipv6_route_replacement_test + ipv6_route_offload_failed_test +" + +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +DEVLINK_DEV=netdevsim/${DEV} +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/ +NUM_NETIFS=0 +source $lib_dir/lib.sh + +check_rt_offload_failed() +{ + local outfile=$1; shift + local line + + # Make sure that the first notification was emitted without + # RTM_F_OFFLOAD_FAILED flag and the second with RTM_F_OFFLOAD_FAILED + # flag + head -n 1 $outfile | grep -q "rt_offload_failed" + if [[ $? -eq 0 ]]; then + return 1 + fi + + head -n 2 $outfile | tail -n 1 | grep -q "rt_offload_failed" +} + +check_rt_trap() +{ + local outfile=$1; shift + local line + + # Make sure that the first notification was emitted without RTM_F_TRAP + # flag and the second with RTM_F_TRAP flag + head -n 1 $outfile | grep -q "rt_trap" + if [[ $? -eq 0 ]]; then + return 1 + fi + + head -n 2 $outfile | tail -n 1 | grep -q "rt_trap" +} + +route_notify_check() +{ + local outfile=$1; shift + local expected_num_lines=$1; shift + local offload_failed=${1:-0}; shift + + # check the monitor results + lines=`wc -l $outfile | cut "-d " -f1` + test $lines -eq $expected_num_lines + check_err $? "$expected_num_lines notifications were expected but $lines were received" + + if [[ $expected_num_lines -eq 1 ]]; then + return + fi + + if [[ $offload_failed -eq 0 ]]; then + check_rt_trap $outfile + check_err $? "Wrong RTM_F_TRAP flags in notifications" + else + check_rt_offload_failed $outfile + check_err $? "Wrong RTM_F_OFFLOAD_FAILED flags in notifications" + fi +} + +route_addition_check() +{ + local ip=$1; shift + local notify=$1; shift + local route=$1; shift + local expected_num_notifications=$1; shift + local offload_failed=${1:-0}; shift + + ip netns exec testns1 sysctl -qw net.$ip.fib_notify_on_flag_change=$notify + + local outfile=$(mktemp) + + $IP monitor route &> $outfile & + sleep 1 + $IP route add $route dev dummy1 + sleep 1 + kill %% && wait %% &> /dev/null + + route_notify_check $outfile $expected_num_notifications $offload_failed + rm -f $outfile + + $IP route del $route dev dummy1 +} + +ipv4_route_addition_test() +{ + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + # route_addition_check will assign value to RET. + route_addition_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the programmed route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the programmed + # route. + notify=2 + expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications + + log_test "IPv4 route addition" +} + +route_deletion_check() +{ + local ip=$1; shift + local notify=$1; shift + local route=$1; shift + local expected_num_notifications=$1; shift + + ip netns exec testns1 sysctl -qw net.$ip.fib_notify_on_flag_change=$notify + $IP route add $route dev dummy1 + sleep 1 + + local outfile=$(mktemp) + + $IP monitor route &> $outfile & + sleep 1 + $IP route del $route dev dummy1 + sleep 1 + kill %% && wait %% &> /dev/null + + route_notify_check $outfile $expected_num_notifications + rm -f $outfile +} + +ipv4_route_deletion_test() +{ + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + local expected_num_notifications=1 + + # Make sure a single notification will be emitted for the deleted route, + # regardless of fib_notify_on_flag_change value. + local notify=0 + # route_deletion_check will assign value to RET. + route_deletion_check $ip $notify $route $expected_num_notifications + + notify=1 + route_deletion_check $ip $notify $route $expected_num_notifications + + log_test "IPv4 route deletion" +} + +route_replacement_check() +{ + local ip=$1; shift + local notify=$1; shift + local route=$1; shift + local expected_num_notifications=$1; shift + + ip netns exec testns1 sysctl -qw net.$ip.fib_notify_on_flag_change=$notify + $IP route add $route dev dummy1 + sleep 1 + + local outfile=$(mktemp) + + $IP monitor route &> $outfile & + sleep 1 + $IP route replace $route dev dummy2 + sleep 1 + kill %% && wait %% &> /dev/null + + route_notify_check $outfile $expected_num_notifications + rm -f $outfile + + $IP route del $route dev dummy2 +} + +ipv4_route_replacement_test() +{ + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + + $IP link add name dummy2 type dummy + $IP link set dev dummy2 up + + # Make sure a single notification will be emitted for the new route. + local notify=0 + local expected_num_notifications=1 + # route_replacement_check will assign value to RET. + route_replacement_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_replacement_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the new route. + notify=2 + expected_num_notifications=1 + route_replacement_check $ip $notify $route $expected_num_notifications + + $IP link del name dummy2 + + log_test "IPv4 route replacement" +} + +ipv4_route_offload_failed_test() +{ + + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + local offload_failed=1 + + echo "y"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload to fail" + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # notify=2 means emit notifications only for failed route installation, + # make sure two notifications will be emitted for the new route. + notify=2 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + echo "n"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload not to fail" + + log_test "IPv4 route offload failed" +} + +ipv6_route_addition_test() +{ + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the programmed route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the programmed + # route. + notify=2 + expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications + + log_test "IPv6 route addition" +} + +ipv6_route_deletion_test() +{ + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + local expected_num_notifications=1 + + # Make sure a single notification will be emitted for the deleted route, + # regardless of fib_notify_on_flag_change value. + local notify=0 + route_deletion_check $ip $notify $route $expected_num_notifications + + notify=1 + route_deletion_check $ip $notify $route $expected_num_notifications + + log_test "IPv6 route deletion" +} + +ipv6_route_replacement_test() +{ + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + + $IP link add name dummy2 type dummy + $IP link set dev dummy2 up + + # Make sure a single notification will be emitted for the new route. + local notify=0 + local expected_num_notifications=1 + route_replacement_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_replacement_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the new route. + notify=2 + expected_num_notifications=1 + route_replacement_check $ip $notify $route $expected_num_notifications + + $IP link del name dummy2 + + log_test "IPv6 route replacement" +} + +ipv6_route_offload_failed_test() +{ + + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + local offload_failed=1 + + echo "y"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload to fail" + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # notify=2 means emit notifications only for failed route installation, + # make sure two notifications will be emitted for the new route. + notify=2 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + echo "n"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload not to fail" + + log_test "IPv6 route offload failed" +} + +setup_prepare() +{ + modprobe netdevsim &> /dev/null + echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done + + ip netns add testns1 + + if [ $? -ne 0 ]; then + echo "Failed to add netns \"testns1\"" + exit 1 + fi + + devlink dev reload $DEVLINK_DEV netns testns1 + + if [ $? -ne 0 ]; then + echo "Failed to reload into netns \"testns1\"" + exit 1 + fi + + IP="ip -n testns1" + + $IP link add name dummy1 type dummy + $IP link set dev dummy1 up +} + +cleanup() +{ + pre_cleanup + + $IP link del name dummy1 + ip netns del testns1 + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device + modprobe -r netdevsim &> /dev/null +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/hw_stats_l3.sh b/tools/testing/selftests/drivers/net/netdevsim/hw_stats_l3.sh new file mode 100755 index 0000000000..cba5ac0842 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/hw_stats_l3.sh @@ -0,0 +1,421 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + l3_reporting_test + l3_fail_next_test + l3_counter_test + l3_rollback_test + l3_monitor_test +" + +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR_1=1337 +DEV_ADDR_2=1057 +DEV_ADDR_3=5417 +NUM_NETIFS=0 +source $lib_dir/lib.sh + +DUMMY_IFINDEX= + +DEV_ADDR() +{ + local n=$1; shift + local var=DEV_ADDR_$n + + echo ${!var} +} + +DEV() +{ + echo netdevsim$(DEV_ADDR $1) +} + +DEVLINK_DEV() +{ + echo netdevsim/$(DEV $1) +} + +SYSFS_NET_DIR() +{ + echo /sys/bus/netdevsim/devices/$(DEV $1)/net/ +} + +DEBUGFS_DIR() +{ + echo /sys/kernel/debug/netdevsim/$(DEV $1)/ +} + +nsim_add() +{ + local n=$1; shift + + echo "$(DEV_ADDR $n) 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $(SYSFS_NET_DIR $n) ] ; do :; done +} + +nsim_reload() +{ + local n=$1; shift + local ns=$1; shift + + devlink dev reload $(DEVLINK_DEV $n) netns $ns + + if [ $? -ne 0 ]; then + echo "Failed to reload $(DEV $n) into netns \"testns1\"" + exit 1 + fi + +} + +nsim_del() +{ + local n=$1; shift + + echo "$(DEV_ADDR $n)" > ${NETDEVSIM_PATH}/del_device +} + +nsim_hwstats_toggle() +{ + local action=$1; shift + local instance=$1; shift + local netdev=$1; shift + local type=$1; shift + + local ifindex=$($IP -j link show dev $netdev | jq '.[].ifindex') + + echo $ifindex > $(DEBUGFS_DIR $instance)/hwstats/$type/$action +} + +nsim_hwstats_enable() +{ + nsim_hwstats_toggle enable_ifindex "$@" +} + +nsim_hwstats_disable() +{ + nsim_hwstats_toggle disable_ifindex "$@" +} + +nsim_hwstats_fail_next_enable() +{ + nsim_hwstats_toggle fail_next_enable "$@" +} + +setup_prepare() +{ + modprobe netdevsim &> /dev/null + nsim_add 1 + nsim_add 2 + nsim_add 3 + + ip netns add testns1 + + if [ $? -ne 0 ]; then + echo "Failed to add netns \"testns1\"" + exit 1 + fi + + nsim_reload 1 testns1 + nsim_reload 2 testns1 + nsim_reload 3 testns1 + + IP="ip -n testns1" + + $IP link add name dummy1 type dummy + $IP link set dev dummy1 up + DUMMY_IFINDEX=$($IP -j link show dev dummy1 | jq '.[].ifindex') +} + +cleanup() +{ + pre_cleanup + + $IP link del name dummy1 + ip netns del testns1 + nsim_del 3 + nsim_del 2 + nsim_del 1 + modprobe -r netdevsim &> /dev/null +} + +netdev_hwstats_used() +{ + local netdev=$1; shift + local type=$1; shift + + $IP -j stats show dev "$netdev" group offload subgroup hw_stats_info | + jq '.[].info.l3_stats.used' +} + +netdev_check_used() +{ + local netdev=$1; shift + local type=$1; shift + + [[ $(netdev_hwstats_used $netdev $type) == "true" ]] +} + +netdev_check_unused() +{ + local netdev=$1; shift + local type=$1; shift + + [[ $(netdev_hwstats_used $netdev $type) == "false" ]] +} + +netdev_hwstats_request() +{ + local netdev=$1; shift + local type=$1; shift + + $IP -j stats show dev "$netdev" group offload subgroup hw_stats_info | + jq ".[].info.${type}_stats.request" +} + +netdev_check_requested() +{ + local netdev=$1; shift + local type=$1; shift + + [[ $(netdev_hwstats_request $netdev $type) == "true" ]] +} + +netdev_check_unrequested() +{ + local netdev=$1; shift + local type=$1; shift + + [[ $(netdev_hwstats_request $netdev $type) == "false" ]] +} + +reporting_test() +{ + local type=$1; shift + local instance=1 + + RET=0 + + [[ -n $(netdev_hwstats_used dummy1 $type) ]] + check_err $? "$type stats not reported" + + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used before either device or netdevsim request" + + nsim_hwstats_enable $instance dummy1 $type + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used before device request" + netdev_check_unrequested dummy1 $type + check_err $? "$type stats reported as requested before device request" + + $IP stats set dev dummy1 ${type}_stats on + netdev_check_used dummy1 $type + check_err $? "$type stats reported as not used after both device and netdevsim request" + netdev_check_requested dummy1 $type + check_err $? "$type stats reported as not requested after device request" + + nsim_hwstats_disable $instance dummy1 $type + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used after netdevsim request withdrawn" + + nsim_hwstats_enable $instance dummy1 $type + netdev_check_used dummy1 $type + check_err $? "$type stats reported as not used after netdevsim request reenabled" + + $IP stats set dev dummy1 ${type}_stats off + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used after device request withdrawn" + netdev_check_unrequested dummy1 $type + check_err $? "$type stats reported as requested after device request withdrawn" + + nsim_hwstats_disable $instance dummy1 $type + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used after both requests withdrawn" + + log_test "Reporting of $type stats usage" +} + +l3_reporting_test() +{ + reporting_test l3 +} + +__fail_next_test() +{ + local instance=$1; shift + local type=$1; shift + + RET=0 + + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used before either device or netdevsim request" + + nsim_hwstats_enable $instance dummy1 $type + nsim_hwstats_fail_next_enable $instance dummy1 $type + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used before device request" + netdev_check_unrequested dummy1 $type + check_err $? "$type stats reported as requested before device request" + + $IP stats set dev dummy1 ${type}_stats on 2>/dev/null + check_fail $? "$type stats request not bounced as it should have been" + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used after bounce" + netdev_check_unrequested dummy1 $type + check_err $? "$type stats reported as requested after bounce" + + $IP stats set dev dummy1 ${type}_stats on + check_err $? "$type stats request failed when it shouldn't have" + netdev_check_used dummy1 $type + check_err $? "$type stats reported as not used after both device and netdevsim request" + netdev_check_requested dummy1 $type + check_err $? "$type stats reported as not requested after device request" + + $IP stats set dev dummy1 ${type}_stats off + nsim_hwstats_disable $instance dummy1 $type + + log_test "Injected failure of $type stats enablement (netdevsim #$instance)" +} + +fail_next_test() +{ + __fail_next_test 1 "$@" + __fail_next_test 2 "$@" + __fail_next_test 3 "$@" +} + +l3_fail_next_test() +{ + fail_next_test l3 +} + +get_hwstat() +{ + local netdev=$1; shift + local type=$1; shift + local selector=$1; shift + + $IP -j stats show dev $netdev group offload subgroup ${type}_stats | + jq ".[0].stats64.${selector}" +} + +counter_test() +{ + local type=$1; shift + local instance=1 + + RET=0 + + nsim_hwstats_enable $instance dummy1 $type + $IP stats set dev dummy1 ${type}_stats on + netdev_check_used dummy1 $type + check_err $? "$type stats reported as not used after both device and netdevsim request" + + # Netdevsim counts 10pps on ingress. We should see maybe a couple + # packets, unless things take a reeealy long time. + local pkts=$(get_hwstat dummy1 l3 rx.packets) + ((pkts < 10)) + check_err $? "$type stats show >= 10 packets after first enablement" + + sleep 2.5 + + local pkts=$(get_hwstat dummy1 l3 rx.packets) + ((pkts >= 20)) + check_err $? "$type stats show < 20 packets after 2.5s passed" + + $IP stats set dev dummy1 ${type}_stats off + + sleep 2 + + $IP stats set dev dummy1 ${type}_stats on + local pkts=$(get_hwstat dummy1 l3 rx.packets) + ((pkts < 10)) + check_err $? "$type stats show >= 10 packets after second enablement" + + $IP stats set dev dummy1 ${type}_stats off + nsim_hwstats_fail_next_enable $instance dummy1 $type + $IP stats set dev dummy1 ${type}_stats on 2>/dev/null + check_fail $? "$type stats request not bounced as it should have been" + + sleep 2 + + $IP stats set dev dummy1 ${type}_stats on + local pkts=$(get_hwstat dummy1 l3 rx.packets) + ((pkts < 10)) + check_err $? "$type stats show >= 10 packets after post-fail enablement" + + $IP stats set dev dummy1 ${type}_stats off + + log_test "Counter values in $type stats" +} + +l3_counter_test() +{ + counter_test l3 +} + +rollback_test() +{ + local type=$1; shift + + RET=0 + + nsim_hwstats_enable 1 dummy1 l3 + nsim_hwstats_enable 2 dummy1 l3 + nsim_hwstats_enable 3 dummy1 l3 + + # The three netdevsim instances are registered in order of their number + # one after another. It is reasonable to expect that whatever + # notifications take place hit no. 2 in between hitting nos. 1 and 3, + # whatever the actual order. This allows us to test that a fail caused + # by no. 2 does not leave the system in a partial state, and rolls + # everything back. + + nsim_hwstats_fail_next_enable 2 dummy1 l3 + $IP stats set dev dummy1 ${type}_stats on 2>/dev/null + check_fail $? "$type stats request not bounced as it should have been" + + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used after bounce" + netdev_check_unrequested dummy1 $type + check_err $? "$type stats reported as requested after bounce" + + sleep 2 + + $IP stats set dev dummy1 ${type}_stats on + check_err $? "$type stats request not upheld as it should have been" + + local pkts=$(get_hwstat dummy1 l3 rx.packets) + ((pkts < 10)) + check_err $? "$type stats show $pkts packets after post-fail enablement" + + $IP stats set dev dummy1 ${type}_stats off + + nsim_hwstats_disable 3 dummy1 l3 + nsim_hwstats_disable 2 dummy1 l3 + nsim_hwstats_disable 1 dummy1 l3 + + log_test "Failure in $type stats enablement rolled back" +} + +l3_rollback_test() +{ + rollback_test l3 +} + +l3_monitor_test() +{ + hw_stats_monitor_test dummy1 l3 \ + "nsim_hwstats_enable 1 dummy1 l3" \ + "nsim_hwstats_disable 1 dummy1 l3" \ + "$IP" +} + +trap cleanup EXIT + +setup_prepare +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh b/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh new file mode 100755 index 0000000000..e8e0dc088d --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh @@ -0,0 +1,1058 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test is for checking the nexthop offload API. It makes use of netdevsim +# which registers a listener to the nexthop notification chain. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + nexthop_single_add_test + nexthop_single_add_err_test + nexthop_group_add_test + nexthop_group_add_err_test + nexthop_res_group_add_test + nexthop_res_group_add_err_test + nexthop_group_replace_test + nexthop_group_replace_err_test + nexthop_res_group_replace_test + nexthop_res_group_replace_err_test + nexthop_res_group_idle_timer_test + nexthop_res_group_idle_timer_del_test + nexthop_res_group_increase_idle_timer_test + nexthop_res_group_decrease_idle_timer_test + nexthop_res_group_unbalanced_timer_test + nexthop_res_group_unbalanced_timer_del_test + nexthop_res_group_no_unbalanced_timer_test + nexthop_res_group_short_unbalanced_timer_test + nexthop_res_group_increase_unbalanced_timer_test + nexthop_res_group_decrease_unbalanced_timer_test + nexthop_res_group_force_migrate_busy_test + nexthop_single_replace_test + nexthop_single_replace_err_test + nexthop_single_in_group_replace_test + nexthop_single_in_group_replace_err_test + nexthop_single_in_res_group_replace_test + nexthop_single_in_res_group_replace_err_test + nexthop_single_in_group_delete_test + nexthop_single_in_group_delete_err_test + nexthop_single_in_res_group_delete_test + nexthop_single_in_res_group_delete_err_test + nexthop_replay_test + nexthop_replay_err_test +" +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +DEBUGFS_NET_DIR=/sys/kernel/debug/netdevsim/$DEV/ +NUM_NETIFS=0 +source $lib_dir/lib.sh + +DEVLINK_DEV= +source $lib_dir/devlink_lib.sh +DEVLINK_DEV=netdevsim/${DEV} + +nexthop_check() +{ + local nharg="$1"; shift + local expected="$1"; shift + + out=$($IP nexthop show ${nharg} | sed -e 's/ *$//') + if [[ "$out" != "$expected" ]]; then + return 1 + fi + + return 0 +} + +nexthop_bucket_nhid_count_check() +{ + local group_id=$1; shift + local expected + local count + local nhid + local ret + + while (($# > 0)); do + nhid=$1; shift + expected=$1; shift + + count=$($IP nexthop bucket show id $group_id nhid $nhid | + grep "trap" | wc -l) + if ((expected != count)); then + return 1 + fi + done + + return 0 +} + +nexthop_resource_check() +{ + local expected_occ=$1; shift + + occ=$($DEVLINK -jp resource show $DEVLINK_DEV \ + | jq '.[][][] | select(.name=="nexthops") | .["occ"]') + + if [ $expected_occ -ne $occ ]; then + return 1 + fi + + return 0 +} + +nexthop_resource_set() +{ + local size=$1; shift + + $DEVLINK resource set $DEVLINK_DEV path nexthops size $size + $DEVLINK dev reload $DEVLINK_DEV +} + +nexthop_single_add_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy" + + $IP nexthop del id 1 + nexthop_resource_check 0 + check_err $? "Wrong nexthop occupancy after delete" + + log_test "Single nexthop add and delete" +} + +nexthop_single_add_err_test() +{ + RET=0 + + nexthop_resource_set 1 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 &> /dev/null + check_fail $? "Nexthop addition succeeded when should fail" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop add failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_group_add_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + $IP nexthop add id 10 group 1,20/2,39 + nexthop_check "id 10" "id 10 group 1,20/2,39 trap" + check_err $? "Unexpected weighted nexthop group entry" + + nexthop_resource_check 61 + check_err $? "Wrong weighted nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + log_test "Nexthop group add and delete" + + $IP nexthop flush &> /dev/null +} + +nexthop_group_add_err_test() +{ + RET=0 + + nexthop_resource_set 2 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 &> /dev/null + check_fail $? "Nexthop group addition succeeded when should fail" + + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy" + + log_test "Nexthop group add failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_res_group_add_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 2 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + $IP nexthop add id 10 group 1,3/2,2 type resilient buckets 5 + nexthop_check "id 10" "id 10 group 1,3/2,2 type resilient buckets 5 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected weighted nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 3 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 7 + check_err $? "Wrong weighted nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + log_test "Resilient nexthop group add and delete" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_add_err_test() +{ + RET=0 + + nexthop_resource_set 2 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 type resilient buckets 4 &> /dev/null + check_fail $? "Nexthop group addition succeeded when should fail" + + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy" + + log_test "Resilient nexthop group add failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 10 group 1/2/3 + nexthop_check "id 10" "id 10 group 1/2/3 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + log_test "Nexthop group replace" + + $IP nexthop flush &> /dev/null +} + +nexthop_group_replace_err_test() +{ + RET=0 + + nexthop_resource_set 5 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 10 group 1/2/3 &> /dev/null + check_fail $? "Nexthop group replacement succeeded when should fail" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_resource_check 5 + check_err $? "Wrong nexthop occupancy after failure" + + log_test "Nexthop group replace failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_res_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 6 + + $IP nexthop replace id 10 group 1/2/3 type resilient + nexthop_check "id 10" "id 10 group 1/2/3 type resilient buckets 6 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 2 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 2 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 3 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 9 + check_err $? "Wrong nexthop occupancy" + + log_test "Resilient nexthop group replace" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_replace_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 6 + + ip netns exec testns1 \ + echo 1 > $DEBUGFS_NET_DIR/fib/fail_res_nexthop_group_replace + $IP nexthop replace id 10 group 1/2/3 type resilient &> /dev/null + check_fail $? "Nexthop group replacement succeeded when should fail" + + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 6 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_bucket_nhid_count_check 10 1 3 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 3 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 9 + check_err $? "Wrong nexthop occupancy after failure" + + log_test "Resilient nexthop group replace failure" + + $IP nexthop flush &> /dev/null + ip netns exec testns1 \ + echo 0 > $DEBUGFS_NET_DIR/fib/fail_res_nexthop_group_replace +} + +nexthop_res_mark_buckets_busy() +{ + local group_id=$1; shift + local nhid=$1; shift + local count=$1; shift + local index + + for index in $($IP -j nexthop bucket show id $group_id nhid $nhid | + jq '.[].bucket.index' | head -n ${count:--0}) + do + echo $group_id $index \ + > $DEBUGFS_NET_DIR/fib/nexthop_bucket_activity + done +} + +nexthop_res_num_nhid_buckets() +{ + local group_id=$1; shift + local nhid=$1; shift + + $IP -j nexthop bucket show id $group_id nhid $nhid | jq length +} + +nexthop_res_group_idle_timer_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 idle_timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "Group expected to be unbalanced" + + sleep 6 + + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after idle timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_idle_timer_del_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1,50/2,50/3,1 \ + type resilient buckets 8 idle_timer 6 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1,50/2,150/3,1 type resilient + + nexthop_bucket_nhid_count_check 10 1 4 2 4 3 0 + check_err $? "Group expected to be unbalanced" + + sleep 4 + + # Deletion prompts group replacement. Check that the bucket timers + # are kept. + $IP nexthop delete id 3 + + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "Group expected to still be unbalanced" + + sleep 4 + + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after idle timer (with delete)" + + $IP nexthop flush &> /dev/null +} + +__nexthop_res_group_increase_timer_test() +{ + local timer=$1; shift + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 $timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 2 + $IP nexthop replace id 10 group 1/2,3 type resilient $timer 8 + sleep 4 + + # 6 seconds, past the original timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group still expected to be unbalanced" + + sleep 4 + + # 10 seconds, past the new timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after $timer increase" + + $IP nexthop flush &> /dev/null +} + +__nexthop_res_group_decrease_timer_test() +{ + local timer=$1; shift + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 $timer 8 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 2 + $IP nexthop replace id 10 group 1/2,3 type resilient $timer 4 + sleep 4 + + # 6 seconds, past the new timer, before the old timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after $timer decrease" + + $IP nexthop flush &> /dev/null +} + +__nexthop_res_group_increase_timer_del_test() +{ + local timer=$1; shift + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1,100/2,100/3,1 \ + type resilient buckets 8 $timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1,100/2,300/3,1 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 2 + $IP nexthop replace id 10 group 1/2,3 type resilient $timer 8 + sleep 4 + + # 6 seconds, past the original timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group still expected to be unbalanced" + + sleep 4 + + # 10 seconds, past the new timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after $timer increase" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_increase_idle_timer_test() +{ + __nexthop_res_group_increase_timer_test idle_timer +} + +nexthop_res_group_decrease_idle_timer_test() +{ + __nexthop_res_group_decrease_timer_test idle_timer +} + +nexthop_res_group_unbalanced_timer_test() +{ + local i + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient \ + buckets 8 idle_timer 6 unbalanced_timer 10 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + for i in 1 2; do + sleep 4 + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "$i: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + done + + # 3 x sleep 4 > unbalanced timer 10 + sleep 4 + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after unbalanced timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_unbalanced_timer_del_test() +{ + local i + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1,50/2,50/3,1 type resilient \ + buckets 8 idle_timer 6 unbalanced_timer 10 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1,50/2,150/3,1 type resilient + + # Check that NH delete does not reset unbalanced time. + sleep 4 + $IP nexthop delete id 3 + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "1: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + + sleep 4 + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "2: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + + # 3 x sleep 4 > unbalanced timer 10 + sleep 4 + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after unbalanced timer (with delete)" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_no_unbalanced_timer_test() +{ + local i + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + for i in $(seq 3); do + sleep 60 + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "$i: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + done + + log_test "Buckets never force-migrated without unbalanced timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_short_unbalanced_timer_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient \ + buckets 8 idle_timer 120 unbalanced_timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 5 + + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after unbalanced < idle timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_increase_unbalanced_timer_test() +{ + __nexthop_res_group_increase_timer_test unbalanced_timer +} + +nexthop_res_group_decrease_unbalanced_timer_test() +{ + __nexthop_res_group_decrease_timer_test unbalanced_timer +} + +nexthop_res_group_force_migrate_busy_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient \ + buckets 8 idle_timer 120 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + $IP nexthop replace id 10 group 2 type resilient + nexthop_bucket_nhid_count_check 10 2 8 + check_err $? "All buckets expected to have migrated" + + log_test "Busy buckets force-migrated when NH removed" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + + $IP nexthop replace id 1 via 192.0.2.3 dev dummy1 + nexthop_check "id 1" "id 1 via 192.0.2.3 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_replace_err_test() +{ + RET=0 + + # This is supposed to cause the replace to fail because the new nexthop + # is programmed before deleting the replaced one. + nexthop_resource_set 1 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + + $IP nexthop replace id 1 via 192.0.2.3 dev dummy1 &> /dev/null + check_fail $? "Nexthop replace succeeded when should fail" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after failure" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy after failure" + + log_test "Single nexthop replace failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_single_in_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 + check_err $? "Failed to replace nexthop when should not" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_group_replace_err_test() +{ + RET=0 + + nexthop_resource_set 5 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 &> /dev/null + check_fail $? "Nexthop replacement succeeded when should fail" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after failure" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in group failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_single_in_res_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 + check_err $? "Failed to replace nexthop when should not" + + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 2 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in resilient group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_res_group_replace_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + + ip netns exec testns1 \ + echo 1 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 &> /dev/null + check_fail $? "Nexthop replacement succeeded when should fail" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after failure" + + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_bucket_nhid_count_check 10 1 2 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in resilient group failure" + + $IP nexthop flush &> /dev/null + ip netns exec testns1 \ + echo 0 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace +} + +nexthop_single_in_group_delete_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop del id 1 + nexthop_check "id 10" "id 10 group 2 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_group_delete_err_test() +{ + RET=0 + + # First, nexthop 1 will be deleted, which will reduce the occupancy to + # 5. Afterwards, a replace notification will be sent for nexthop group + # 10 with only two nexthops. Since the new group is allocated before + # the old is deleted, the replacement will fail as it will result in an + # occupancy of 7. + nexthop_resource_set 6 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2/3 + + $IP nexthop del id 1 + + nexthop_resource_check 5 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in group failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_single_in_res_group_delete_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + + $IP nexthop del id 1 + nexthop_check "id 10" "id 10 group 2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 2 4 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 5 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in resilient group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_res_group_delete_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2/3 type resilient buckets 6 + + ip netns exec testns1 \ + echo 1 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace + $IP nexthop del id 1 + + # We failed to replace the two nexthop buckets that were originally + # assigned to nhid 1. + nexthop_bucket_nhid_count_check 10 2 2 3 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 8 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in resilient group failure" + + $IP nexthop flush &> /dev/null + ip netns exec testns1 \ + echo 0 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace +} + +nexthop_replay_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $DEVLINK dev reload $DEVLINK_DEV + check_err $? "Failed to reload when should not" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after reload" + + nexthop_check "id 2" "id 2 via 192.0.2.3 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after reload" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry after reload" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + log_test "Nexthop replay" + + $IP nexthop flush &> /dev/null +} + +nexthop_replay_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + # Reduce size of nexthop resource so that reload will fail. + $DEVLINK resource set $DEVLINK_DEV path nexthops size 3 + $DEVLINK dev reload $DEVLINK_DEV &> /dev/null + check_fail $? "Reload succeeded when should fail" + + $DEVLINK resource set $DEVLINK_DEV path nexthops size 9999 + $DEVLINK dev reload $DEVLINK_DEV + check_err $? "Failed to reload when should not" + + log_test "Nexthop replay failure" + + $IP nexthop flush &> /dev/null +} + +setup_prepare() +{ + local netdev + + modprobe netdevsim &> /dev/null + + echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done + + set -e + + ip netns add testns1 + devlink dev reload $DEVLINK_DEV netns testns1 + + IP="ip -netns testns1" + DEVLINK="devlink -N testns1" + + $IP link add name dummy1 up type dummy + $IP address add 192.0.2.1/24 dev dummy1 + + set +e +} + +cleanup() +{ + pre_cleanup + ip netns del testns1 + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device + modprobe -r netdevsim &> /dev/null +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/psample.sh b/tools/testing/selftests/drivers/net/netdevsim/psample.sh new file mode 100755 index 0000000000..e689ff7a0b --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/psample.sh @@ -0,0 +1,183 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test is for checking the psample module. It makes use of netdevsim +# which periodically generates "sampled" packets. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + psample_enable_test + psample_group_num_test + psample_md_test +" +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +PSAMPLE_DIR=/sys/kernel/debug/netdevsim/$DEV/psample/ +CAPTURE_FILE=$(mktemp) +NUM_NETIFS=0 +source $lib_dir/lib.sh + +DEVLINK_DEV= +source $lib_dir/devlink_lib.sh +DEVLINK_DEV=netdevsim/${DEV} + +# Available at https://github.com/Mellanox/libpsample +require_command psample + +psample_capture() +{ + rm -f $CAPTURE_FILE + + timeout 2 ip netns exec testns1 psample &> $CAPTURE_FILE +} + +psample_enable_test() +{ + RET=0 + + echo 1 > $PSAMPLE_DIR/enable + check_err $? "Failed to enable sampling when should not" + + echo 1 > $PSAMPLE_DIR/enable 2>/dev/null + check_fail $? "Sampling enablement succeeded when should fail" + + psample_capture + if [ $(cat $CAPTURE_FILE | wc -l) -eq 0 ]; then + check_err 1 "Failed to capture sampled packets" + fi + + echo 0 > $PSAMPLE_DIR/enable + check_err $? "Failed to disable sampling when should not" + + echo 0 > $PSAMPLE_DIR/enable 2>/dev/null + check_fail $? "Sampling disablement succeeded when should fail" + + psample_capture + if [ $(cat $CAPTURE_FILE | wc -l) -ne 0 ]; then + check_err 1 "Captured sampled packets when should not" + fi + + log_test "psample enable / disable" +} + +psample_group_num_test() +{ + RET=0 + + echo 1234 > $PSAMPLE_DIR/group_num + echo 1 > $PSAMPLE_DIR/enable + + psample_capture + grep -q -e "group 1234" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong group number" + + # New group number should only be used after disable / enable. + echo 4321 > $PSAMPLE_DIR/group_num + + psample_capture + grep -q -e "group 4321" $CAPTURE_FILE + check_fail $? "Group number changed while sampling is active" + + echo 0 > $PSAMPLE_DIR/enable && echo 1 > $PSAMPLE_DIR/enable + + psample_capture + grep -q -e "group 4321" $CAPTURE_FILE + check_err $? "Group number did not change after restarting sampling" + + log_test "psample group number" + + echo 0 > $PSAMPLE_DIR/enable +} + +psample_md_test() +{ + RET=0 + + echo 1 > $PSAMPLE_DIR/enable + + echo 1234 > $PSAMPLE_DIR/in_ifindex + echo 4321 > $PSAMPLE_DIR/out_ifindex + psample_capture + + grep -q -e "in-ifindex 1234" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong in-ifindex" + + grep -q -e "out-ifindex 4321" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong out-ifindex" + + echo 5 > $PSAMPLE_DIR/out_tc + psample_capture + + grep -q -e "out-tc 5" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong out-tc" + + echo $((2**16 - 1)) > $PSAMPLE_DIR/out_tc + psample_capture + + grep -q -e "out-tc " $CAPTURE_FILE + check_fail $? "Sampled packets reported with out-tc when should not" + + echo 1 > $PSAMPLE_DIR/out_tc + echo 10000 > $PSAMPLE_DIR/out_tc_occ_max + psample_capture + + grep -q -e "out-tc-occ " $CAPTURE_FILE + check_err $? "Sampled packets not reported with out-tc-occ when should" + + echo 0 > $PSAMPLE_DIR/out_tc_occ_max + psample_capture + + grep -q -e "out-tc-occ " $CAPTURE_FILE + check_fail $? "Sampled packets reported with out-tc-occ when should not" + + echo 10000 > $PSAMPLE_DIR/latency_max + psample_capture + + grep -q -e "latency " $CAPTURE_FILE + check_err $? "Sampled packets not reported with latency when should" + + echo 0 > $PSAMPLE_DIR/latency_max + psample_capture + + grep -q -e "latency " $CAPTURE_FILE + check_fail $? "Sampled packets reported with latency when should not" + + log_test "psample metadata" + + echo 0 > $PSAMPLE_DIR/enable +} + +setup_prepare() +{ + modprobe netdevsim &> /dev/null + + echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done + + set -e + + ip netns add testns1 + devlink dev reload $DEVLINK_DEV netns testns1 + + set +e +} + +cleanup() +{ + pre_cleanup + rm -f $CAPTURE_FILE + ip netns del testns1 + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device + modprobe -r netdevsim &> /dev/null +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh b/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh new file mode 100755 index 0000000000..fd13c8cfb7 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh @@ -0,0 +1,77 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +set -o pipefail + +n_children() { + n=$(tc qdisc show dev $NDEV | grep '^qdisc' | wc -l) + echo $((n - 1)) +} + +tcq() { + tc qdisc $1 dev $NDEV ${@:2} +} + +n_child_assert() { + n=$(n_children) + if [ $n -ne $1 ]; then + echo "ERROR ($root): ${@:2}, expected $1 have $n" + ((num_errors++)) + else + ((num_passes++)) + fi +} + + +for root in mq mqprio; do + NDEV=$(make_netdev 1 4) + + opts= + [ $root == "mqprio" ] && opts='hw 0 num_tc 1 map 0 0 0 0 queues 1@0' + + tcq add root handle 100: $root $opts + n_child_assert 4 'Init' + + # All defaults + + for n in 3 2 1 2 3 4 1 4; do + ethtool -L $NDEV combined $n + n_child_assert $n "Change queues to $n while down" + done + + ip link set dev $NDEV up + + for n in 3 2 1 2 3 4 1 4; do + ethtool -L $NDEV combined $n + n_child_assert $n "Change queues to $n while up" + done + + # One real one + tcq replace parent 100:4 handle 204: pfifo_fast + n_child_assert 4 "One real queue" + + ethtool -L $NDEV combined 1 + n_child_assert 2 "One real queue, one default" + + ethtool -L $NDEV combined 4 + n_child_assert 4 "One real queue, rest default" + + # Graft some + tcq replace parent 100:1 handle 204: + n_child_assert 3 "Grafted" + + ethtool -L $NDEV combined 1 + n_child_assert 1 "Grafted, one" + + cleanup_nsim +done + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh new file mode 100755 index 0000000000..185b02d2d4 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh @@ -0,0 +1,962 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +VNI_GEN=$RANDOM +NSIM_ID=$((RANDOM % 1024)) +NSIM_DEV_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_ID +NSIM_DEV_DFS=/sys/kernel/debug/netdevsim/netdevsim$NSIM_ID +NSIM_NETDEV= +HAS_ETHTOOL= +STATIC_ENTRIES= +EXIT_STATUS=0 +num_cases=0 +num_errors=0 + +clean_up_devs=( ) + +function err_cnt { + echo "ERROR:" $@ + EXIT_STATUS=1 + ((num_errors++)) + ((num_cases++)) +} + +function pass_cnt { + ((num_cases++)) +} + +function cleanup_tuns { + for dev in "${clean_up_devs[@]}"; do + [ -e /sys/class/net/$dev ] && ip link del dev $dev + done + clean_up_devs=( ) +} + +function cleanup_nsim { + if [ -e $NSIM_DEV_SYS ]; then + echo $NSIM_ID > /sys/bus/netdevsim/del_device + fi +} + +function cleanup { + cleanup_tuns + cleanup_nsim +} + +trap cleanup EXIT + +function new_vxlan { + local dev=$1 + local dstport=$2 + local lower=$3 + local ipver=$4 + local flags=$5 + + local group ipfl + + [ "$ipver" != '6' ] && group=239.1.1.1 || group=fff1::1 + [ "$ipver" != '6' ] || ipfl="-6" + + [[ ! "$flags" =~ "external" ]] && flags="$flags id $((VNI_GEN++))" + + ip $ipfl link add $dev type vxlan \ + group $group \ + dev $lower \ + dstport $dstport \ + $flags + + ip link set dev $dev up + + clean_up_devs=("${clean_up_devs[@]}" $dev) + + check_tables +} + +function new_geneve { + local dev=$1 + local dstport=$2 + local ipver=$3 + local flags=$4 + + local group ipfl + + [ "$ipver" != '6' ] && remote=1.1.1.2 || group=::2 + [ "$ipver" != '6' ] || ipfl="-6" + + [[ ! "$flags" =~ "external" ]] && flags="$flags vni $((VNI_GEN++))" + + ip $ipfl link add $dev type geneve \ + remote $remote \ + dstport $dstport \ + $flags + + ip link set dev $dev up + + clean_up_devs=("${clean_up_devs[@]}" $dev) + + check_tables +} + +function del_dev { + local dev=$1 + + ip link del dev $dev + check_tables +} + +# Helpers for netdevsim port/type encoding +function mke { + local port=$1 + local type=$2 + + echo $((port << 16 | type)) +} + +function pre { + local val=$1 + + echo -e "port: $((val >> 16))\ttype: $((val & 0xffff))" +} + +function pre_ethtool { + local val=$1 + local port=$((val >> 16)) + local type=$((val & 0xffff)) + + case $type in + 1) + type_name="vxlan" + ;; + 2) + type_name="geneve" + ;; + 4) + type_name="vxlan-gpe" + ;; + *) + type_name="bit X" + ;; + esac + + echo "port $port, $type_name" +} + +function check_table { + local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1 + local -n expected=$2 + local last=$3 + + read -a have < $path + + if [ ${#expected[@]} -ne ${#have[@]} ]; then + echo "check_table: BAD NUMBER OF ITEMS" + return 0 + fi + + for i in "${!expected[@]}"; do + if [ -n "$HAS_ETHTOOL" -a ${expected[i]} -ne 0 ]; then + pp_expected=`pre_ethtool ${expected[i]}` + ethtool --show-tunnels $NSIM_NETDEV | grep "$pp_expected" >/dev/null + if [ $? -ne 0 -a $last -ne 0 ]; then + err_cnt "ethtool table $1 on port $port: $pfx - $msg" + echo " check_table: ethtool does not contain '$pp_expected'" + ethtool --show-tunnels $NSIM_NETDEV + return 0 + + fi + fi + + if [ ${expected[i]} != ${have[i]} ]; then + if [ $last -ne 0 ]; then + err_cnt "table $1 on port $port: $pfx - $msg" + echo " check_table: wrong entry $i" + echo " expected: `pre ${expected[i]}`" + echo " have: `pre ${have[i]}`" + return 0 + fi + return 1 + fi + done + + pass_cnt + return 0 +} + +function check_tables { + # Need retries in case we have workqueue making the changes + local retries=10 + + while ! check_table 0 exp0 $((retries == 0)); do + sleep 0.02 + ((retries--)) + done + while ! check_table 1 exp1 $((retries == 0)); do + sleep 0.02 + ((retries--)) + done + + if [ -n "$HAS_ETHTOOL" -a -n "${STATIC_ENTRIES[0]}" ]; then + fail=0 + for i in "${!STATIC_ENTRIES[@]}"; do + pp_expected=`pre_ethtool ${STATIC_ENTRIES[i]}` + cnt=$(ethtool --show-tunnels $NSIM_NETDEV | grep -c "$pp_expected") + if [ $cnt -ne 1 ]; then + err_cnt "ethtool static entry: $pfx - $msg" + echo " check_table: ethtool does not contain '$pp_expected'" + ethtool --show-tunnels $NSIM_NETDEV + fail=1 + fi + done + [ $fail == 0 ] && pass_cnt + fi +} + +function print_table { + local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1 + read -a have < $path + + tree $NSIM_DEV_DFS/ + + echo "Port $port table $1:" + + for i in "${!have[@]}"; do + echo " `pre ${have[i]}`" + done + +} + +function print_tables { + print_table 0 + print_table 1 +} + +function get_netdev_name { + local -n old=$1 + + new=$(ls /sys/class/net) + + for netdev in $new; do + for check in $old; do + [ $netdev == $check ] && break + done + + if [ $netdev != $check ]; then + echo $netdev + break + fi + done +} + +### +### Code start +### + +# Probe ethtool support +ethtool -h | grep show-tunnels 2>&1 >/dev/null && HAS_ETHTOOL=y + +modprobe netdevsim + +# Basic test +pfx="basic" + +for port in 0 1; do + old_netdevs=$(ls /sys/class/net) + if [ $port -eq 0 ]; then + echo $NSIM_ID > /sys/bus/netdevsim/new_device + else + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + echo 1 > $NSIM_DEV_SYS/new_port + fi + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + msg="new NIC device created" + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) + check_tables + + msg="VxLAN v4 devices" + exp0=( `mke 4789 1` 0 0 0 ) + new_vxlan vxlan0 4789 $NSIM_NETDEV + new_vxlan vxlan1 4789 $NSIM_NETDEV + + msg="VxLAN v4 devices go down" + exp0=( 0 0 0 0 ) + ifconfig vxlan1 down + ifconfig vxlan0 down + check_tables + + msg="VxLAN v6 devices" + exp0=( `mke 4789 1` 0 0 0 ) + new_vxlan vxlanA 4789 $NSIM_NETDEV 6 + + for ifc in vxlan0 vxlan1; do + ifconfig $ifc up + done + + new_vxlan vxlanB 4789 $NSIM_NETDEV 6 + + msg="another VxLAN v6 devices" + exp0=( `mke 4789 1` `mke 4790 1` 0 0 ) + new_vxlan vxlanC 4790 $NSIM_NETDEV 6 + + msg="Geneve device" + exp1=( `mke 6081 2` 0 0 0 ) + new_geneve gnv0 6081 + + msg="NIC device goes down" + ifconfig $NSIM_NETDEV down + if [ $port -eq 1 ]; then + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) + fi + check_tables + msg="NIC device goes up again" + ifconfig $NSIM_NETDEV up + exp0=( `mke 4789 1` `mke 4790 1` 0 0 ) + exp1=( `mke 6081 2` 0 0 0 ) + check_tables + + cleanup_tuns + + msg="tunnels destroyed" + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) + check_tables + + modprobe -r geneve + modprobe -r vxlan + modprobe -r udp_tunnel + + check_tables +done + +modprobe -r netdevsim + +# Module tests +pfx="module tests" + +if modinfo netdevsim | grep udp_tunnel >/dev/null; then + err_cnt "netdevsim depends on udp_tunnel" +else + pass_cnt +fi + +modprobe netdevsim + +old_netdevs=$(ls /sys/class/net) +port=0 +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port +echo 1000 > $NSIM_DEV_DFS/udp_ports_sleep +echo 0 > $NSIM_DEV_SYS/new_port +NSIM_NETDEV=`get_netdev_name old_netdevs` + +msg="create VxLANs" +exp0=( 0 0 0 0 ) # sleep is longer than out wait +new_vxlan vxlan0 10000 $NSIM_NETDEV + +modprobe -r vxlan +modprobe -r udp_tunnel + +msg="remove tunnels" +exp0=( 0 0 0 0 ) +check_tables + +msg="create VxLANs" +exp0=( 0 0 0 0 ) # sleep is longer than out wait +new_vxlan vxlan0 10000 $NSIM_NETDEV + +exp0=( 0 0 0 0 ) + +modprobe -r netdevsim +modprobe netdevsim + +# Overflow the table + +function overflow_table0 { + local pfx=$1 + + msg="create VxLANs 1/5" + exp0=( `mke 10000 1` 0 0 0 ) + new_vxlan vxlan0 10000 $NSIM_NETDEV + + msg="create VxLANs 2/5" + exp0=( `mke 10000 1` `mke 10001 1` 0 0 ) + new_vxlan vxlan1 10001 $NSIM_NETDEV + + msg="create VxLANs 3/5" + exp0=( `mke 10000 1` `mke 10001 1` `mke 10002 1` 0 ) + new_vxlan vxlan2 10002 $NSIM_NETDEV + + msg="create VxLANs 4/5" + exp0=( `mke 10000 1` `mke 10001 1` `mke 10002 1` `mke 10003 1` ) + new_vxlan vxlan3 10003 $NSIM_NETDEV + + msg="create VxLANs 5/5" + new_vxlan vxlan4 10004 $NSIM_NETDEV +} + +function overflow_table1 { + local pfx=$1 + + msg="create GENEVE 1/5" + exp1=( `mke 20000 2` 0 0 0 ) + new_geneve gnv0 20000 + + msg="create GENEVE 2/5" + exp1=( `mke 20000 2` `mke 20001 2` 0 0 ) + new_geneve gnv1 20001 + + msg="create GENEVE 3/5" + exp1=( `mke 20000 2` `mke 20001 2` `mke 20002 2` 0 ) + new_geneve gnv2 20002 + + msg="create GENEVE 4/5" + exp1=( `mke 20000 2` `mke 20001 2` `mke 20002 2` `mke 20003 2` ) + new_geneve gnv3 20003 + + msg="create GENEVE 5/5" + new_geneve gnv4 20004 +} + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +for port in 0 1; do + if [ $port -ne 0 ]; then + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + fi + + echo $port > $NSIM_DEV_SYS/new_port + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + overflow_table0 "overflow NIC table" + overflow_table1 "overflow NIC table" + + msg="replace VxLAN in overflow table" + exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` ) + del_dev vxlan1 + + msg="vacate VxLAN in overflow table" + exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` ) + del_dev vxlan2 + + msg="replace GENEVE in overflow table" + exp1=( `mke 20000 2` `mke 20004 2` `mke 20002 2` `mke 20003 2` ) + del_dev gnv1 + + msg="vacate GENEVE in overflow table" + exp1=( `mke 20000 2` `mke 20004 2` 0 `mke 20003 2` ) + del_dev gnv2 + + msg="table sharing - share" + exp1=( `mke 20000 2` `mke 20004 2` `mke 30001 4` `mke 20003 2` ) + new_vxlan vxlanG0 30001 $NSIM_NETDEV 4 "gpe external" + + msg="table sharing - overflow" + new_vxlan vxlanG1 30002 $NSIM_NETDEV 4 "gpe external" + msg="table sharing - overflow v6" + new_vxlan vxlanG2 30002 $NSIM_NETDEV 6 "gpe external" + + exp1=( `mke 20000 2` `mke 30002 4` `mke 30001 4` `mke 20003 2` ) + del_dev gnv4 + + msg="destroy NIC" + echo $port > $NSIM_DEV_SYS/del_port + + cleanup_tuns + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) +done + +cleanup_nsim + +# Sync all +pfx="sync all" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port +echo 1 > $NSIM_DEV_DFS/udp_ports_sync_all + +for port in 0 1; do + if [ $port -ne 0 ]; then + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + fi + + echo $port > $NSIM_DEV_SYS/new_port + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + overflow_table0 "overflow NIC table" + overflow_table1 "overflow NIC table" + + msg="replace VxLAN in overflow table" + exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` ) + del_dev vxlan1 + + msg="vacate VxLAN in overflow table" + exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` ) + del_dev vxlan2 + + msg="replace GENEVE in overflow table" + exp1=( `mke 20000 2` `mke 20004 2` `mke 20002 2` `mke 20003 2` ) + del_dev gnv1 + + msg="vacate GENEVE in overflow table" + exp1=( `mke 20000 2` `mke 20004 2` 0 `mke 20003 2` ) + del_dev gnv2 + + msg="table sharing - share" + exp1=( `mke 20000 2` `mke 20004 2` `mke 30001 4` `mke 20003 2` ) + new_vxlan vxlanG0 30001 $NSIM_NETDEV 4 "gpe external" + + msg="table sharing - overflow" + new_vxlan vxlanG1 30002 $NSIM_NETDEV 4 "gpe external" + msg="table sharing - overflow v6" + new_vxlan vxlanG2 30002 $NSIM_NETDEV 6 "gpe external" + + exp1=( `mke 20000 2` `mke 30002 4` `mke 30001 4` `mke 20003 2` ) + del_dev gnv4 + + msg="destroy NIC" + echo $port > $NSIM_DEV_SYS/del_port + + cleanup_tuns + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) +done + +cleanup_nsim + +# Destroy full NIC +pfx="destroy full" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +for port in 0 1; do + if [ $port -ne 0 ]; then + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + fi + + echo $port > $NSIM_DEV_SYS/new_port + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + overflow_table0 "destroy NIC" + overflow_table1 "destroy NIC" + + msg="destroy NIC" + echo $port > $NSIM_DEV_SYS/del_port + + cleanup_tuns + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) +done + +cleanup_nsim + +# IPv4 only +pfx="IPv4 only" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port +echo 1 > $NSIM_DEV_DFS/udp_ports_ipv4_only + +for port in 0 1; do + if [ $port -ne 0 ]; then + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + fi + + echo $port > $NSIM_DEV_SYS/new_port + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + msg="create VxLANs v6" + new_vxlan vxlanA0 10000 $NSIM_NETDEV 6 + + msg="create VxLANs v6" + new_vxlan vxlanA1 10000 $NSIM_NETDEV 6 + + ip link set dev vxlanA0 down + ip link set dev vxlanA0 up + check_tables + + msg="create VxLANs v4" + exp0=( `mke 10000 1` 0 0 0 ) + new_vxlan vxlan0 10000 $NSIM_NETDEV + + msg="down VxLANs v4" + exp0=( 0 0 0 0 ) + ip link set dev vxlan0 down + check_tables + + msg="up VxLANs v4" + exp0=( `mke 10000 1` 0 0 0 ) + ip link set dev vxlan0 up + check_tables + + msg="destroy VxLANs v4" + exp0=( 0 0 0 0 ) + del_dev vxlan0 + + msg="recreate VxLANs v4" + exp0=( `mke 10000 1` 0 0 0 ) + new_vxlan vxlan0 10000 $NSIM_NETDEV + + del_dev vxlanA0 + del_dev vxlanA1 + + msg="destroy NIC" + echo $port > $NSIM_DEV_SYS/del_port + + cleanup_tuns + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) +done + +cleanup_nsim + +# Failures +pfx="error injection" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +for port in 0 1; do + if [ $port -ne 0 ]; then + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + fi + + echo $port > $NSIM_DEV_SYS/new_port + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error + + msg="1 - create VxLANs v6" + exp0=( 0 0 0 0 ) + new_vxlan vxlanA0 10000 $NSIM_NETDEV 6 + + msg="1 - create VxLANs v4" + exp0=( `mke 10000 1` 0 0 0 ) + new_vxlan vxlan0 10000 $NSIM_NETDEV + + msg="1 - remove VxLANs v4" + del_dev vxlan0 + + msg="1 - remove VxLANs v6" + exp0=( 0 0 0 0 ) + del_dev vxlanA0 + + msg="2 - create GENEVE" + exp1=( `mke 20000 2` 0 0 0 ) + new_geneve gnv0 20000 + + msg="2 - destroy GENEVE" + echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error + exp1=( `mke 20000 2` 0 0 0 ) + del_dev gnv0 + + msg="2 - create second GENEVE" + exp1=( 0 `mke 20001 2` 0 0 ) + new_geneve gnv0 20001 + + msg="destroy NIC" + echo $port > $NSIM_DEV_SYS/del_port + + cleanup_tuns + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) +done + +cleanup_nsim + +# netdev flags +pfx="netdev flags" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +for port in 0 1; do + if [ $port -ne 0 ]; then + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + fi + + echo $port > $NSIM_DEV_SYS/new_port + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + msg="create VxLANs v6" + exp0=( `mke 10000 1` 0 0 0 ) + new_vxlan vxlanA0 10000 $NSIM_NETDEV 6 + + msg="create VxLANs v4" + new_vxlan vxlan0 10000 $NSIM_NETDEV + + msg="turn off" + exp0=( 0 0 0 0 ) + ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off + check_tables + + msg="turn on" + exp0=( `mke 10000 1` 0 0 0 ) + ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on + check_tables + + msg="remove both" + del_dev vxlanA0 + exp0=( 0 0 0 0 ) + del_dev vxlan0 + check_tables + + ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off + + msg="create VxLANs v4 - off" + exp0=( 0 0 0 0 ) + new_vxlan vxlan0 10000 $NSIM_NETDEV + + msg="created off - turn on" + exp0=( `mke 10000 1` 0 0 0 ) + ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on + check_tables + + msg="destroy NIC" + echo $port > $NSIM_DEV_SYS/del_port + + cleanup_tuns + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) +done + +cleanup_nsim + +# device initiated reset +pfx="reset notification" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +for port in 0 1; do + if [ $port -ne 0 ]; then + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + fi + + echo $port > $NSIM_DEV_SYS/new_port + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + msg="create VxLANs v6" + exp0=( `mke 10000 1` 0 0 0 ) + new_vxlan vxlanA0 10000 $NSIM_NETDEV 6 + + msg="create VxLANs v4" + new_vxlan vxlan0 10000 $NSIM_NETDEV + + echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset + check_tables + + msg="NIC device goes down" + ifconfig $NSIM_NETDEV down + if [ $port -eq 1 ]; then + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) + fi + check_tables + + echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset + check_tables + + msg="NIC device goes up again" + ifconfig $NSIM_NETDEV up + exp0=( `mke 10000 1` 0 0 0 ) + check_tables + + msg="remove both" + del_dev vxlanA0 + exp0=( 0 0 0 0 ) + del_dev vxlan0 + check_tables + + echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset + check_tables + + msg="destroy NIC" + echo $port > $NSIM_DEV_SYS/del_port + + cleanup_tuns + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) +done + +cleanup_nsim + +# shared port tables +pfx="table sharing" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +echo 0 > $NSIM_DEV_DFS/udp_ports_open_only +echo 1 > $NSIM_DEV_DFS/udp_ports_sleep +echo 1 > $NSIM_DEV_DFS/udp_ports_shared + +old_netdevs=$(ls /sys/class/net) +echo 1 > $NSIM_DEV_SYS/new_port +NSIM_NETDEV=`get_netdev_name old_netdevs` +old_netdevs=$(ls /sys/class/net) +echo 2 > $NSIM_DEV_SYS/new_port +NSIM_NETDEV2=`get_netdev_name old_netdevs` + +msg="VxLAN v4 devices" +exp0=( `mke 4789 1` 0 0 0 ) +exp1=( 0 0 0 0 ) +new_vxlan vxlan0 4789 $NSIM_NETDEV +new_vxlan vxlan1 4789 $NSIM_NETDEV2 + +msg="VxLAN v4 devices go down" +exp0=( 0 0 0 0 ) +ifconfig vxlan1 down +ifconfig vxlan0 down +check_tables + +for ifc in vxlan0 vxlan1; do + ifconfig $ifc up +done + +msg="VxLAN v6 device" +exp0=( `mke 4789 1` `mke 4790 1` 0 0 ) +new_vxlan vxlanC 4790 $NSIM_NETDEV 6 + +msg="Geneve device" +exp1=( `mke 6081 2` 0 0 0 ) +new_geneve gnv0 6081 + +msg="NIC device goes down" +ifconfig $NSIM_NETDEV down +check_tables + +msg="NIC device goes up again" +ifconfig $NSIM_NETDEV up +check_tables + +for i in `seq 2`; do + msg="turn feature off - 1, rep $i" + ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off + check_tables + + msg="turn feature off - 2, rep $i" + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) + ethtool -K $NSIM_NETDEV2 rx-udp_tunnel-port-offload off + check_tables + + msg="turn feature on - 1, rep $i" + exp0=( `mke 4789 1` `mke 4790 1` 0 0 ) + exp1=( `mke 6081 2` 0 0 0 ) + ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on + check_tables + + msg="turn feature on - 2, rep $i" + ethtool -K $NSIM_NETDEV2 rx-udp_tunnel-port-offload on + check_tables +done + +msg="tunnels destroyed 1" +cleanup_tuns +exp0=( 0 0 0 0 ) +exp1=( 0 0 0 0 ) +check_tables + +overflow_table0 "overflow NIC table" + +msg="re-add a port" + +echo 2 > $NSIM_DEV_SYS/del_port +echo 2 > $NSIM_DEV_SYS/new_port +NSIM_NETDEV=`get_netdev_name old_netdevs` +check_tables + +msg="replace VxLAN in overflow table" +exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` ) +del_dev vxlan1 + +msg="vacate VxLAN in overflow table" +exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` ) +del_dev vxlan2 + +echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset +check_tables + +msg="tunnels destroyed 2" +cleanup_tuns +exp0=( 0 0 0 0 ) +exp1=( 0 0 0 0 ) +check_tables + +echo 1 > $NSIM_DEV_SYS/del_port +echo 2 > $NSIM_DEV_SYS/del_port + +cleanup_nsim + +# Static IANA port +pfx="static IANA vxlan" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +echo 1 > $NSIM_DEV_DFS/udp_ports_static_iana_vxlan +STATIC_ENTRIES=( `mke 4789 1` ) + +port=1 +old_netdevs=$(ls /sys/class/net) +echo $port > $NSIM_DEV_SYS/new_port +NSIM_NETDEV=`get_netdev_name old_netdevs` + +msg="check empty" +exp0=( 0 0 0 0 ) +exp1=( 0 0 0 0 ) +check_tables + +msg="add on static port" +new_vxlan vxlan0 4789 $NSIM_NETDEV +new_vxlan vxlan1 4789 $NSIM_NETDEV + +msg="add on different port" +exp0=( `mke 4790 1` 0 0 0 ) +new_vxlan vxlan2 4790 $NSIM_NETDEV + +cleanup_tuns + +msg="tunnels destroyed" +exp0=( 0 0 0 0 ) +exp1=( 0 0 0 0 ) +check_tables + +msg="different type" +new_geneve gnv0 4789 + +cleanup_tuns +cleanup_nsim + +# END + +modprobe -r netdevsim + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $num_cases checks" +else + echo "FAILED $num_errors/$num_cases checks" +fi + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh b/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh new file mode 100755 index 0000000000..c51c83421c --- /dev/null +++ b/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh @@ -0,0 +1,253 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2022 NXP + +# The script is mostly generic, with the exception of the +# ethtool per-TC counter names ("rx_green_prio_${tc}") + +WAIT_TIME=1 +NUM_NETIFS=4 +STABLE_MAC_ADDRS=yes +NETIF_CREATE=no +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +require_command dcb + +h1=${NETIFS[p1]} +swp1=${NETIFS[p2]} +swp2=${NETIFS[p3]} +h2=${NETIFS[p4]} + +H1_IPV4="192.0.2.1" +H2_IPV4="192.0.2.2" +H1_IPV6="2001:db8:1::1" +H2_IPV6="2001:db8:1::2" + +h1_create() +{ + simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h1_destroy() +{ + simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h2_create() +{ + simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h2_destroy() +{ + simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h1_vlan_create() +{ + local vid=$1 + + vlan_create $h1 $vid + simple_if_init $h1.$vid $H1_IPV4/24 $H1_IPV6/64 + ip link set $h1.$vid type vlan \ + egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \ + ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 +} + +h1_vlan_destroy() +{ + local vid=$1 + + simple_if_fini $h1.$vid $H1_IPV4/24 $H1_IPV6/64 + vlan_destroy $h1 $vid +} + +h2_vlan_create() +{ + local vid=$1 + + vlan_create $h2 $vid + simple_if_init $h2.$vid $H2_IPV4/24 $H2_IPV6/64 + ip link set $h2.$vid type vlan \ + egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \ + ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 +} + +h2_vlan_destroy() +{ + local vid=$1 + + simple_if_fini $h2.$vid $H2_IPV4/24 $H2_IPV6/64 + vlan_destroy $h2 $vid +} + +vlans_prepare() +{ + h1_vlan_create 100 + h2_vlan_create 100 + + tc qdisc add dev ${h1}.100 clsact + tc filter add dev ${h1}.100 egress protocol ipv4 \ + flower ip_proto icmp action skbedit priority 3 + tc filter add dev ${h1}.100 egress protocol ipv6 \ + flower ip_proto icmpv6 action skbedit priority 3 +} + +vlans_destroy() +{ + tc qdisc del dev ${h1}.100 clsact + + h1_vlan_destroy 100 + h2_vlan_destroy 100 +} + +switch_create() +{ + ip link set ${swp1} up + ip link set ${swp2} up + + # Ports should trust VLAN PCP even with vlan_filtering=0 + ip link add br0 type bridge + ip link set ${swp1} master br0 + ip link set ${swp2} master br0 + ip link set br0 up +} + +switch_destroy() +{ + ip link del br0 +} + +setup_prepare() +{ + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + switch_destroy + + vrf_cleanup +} + +dscp_cs_to_tos() +{ + local dscp_cs=$1 + + # https://datatracker.ietf.org/doc/html/rfc2474 + # 4.2.2.1 The Class Selector Codepoints + echo $((${dscp_cs} << 5)) +} + +run_test() +{ + local test_name=$1; shift + local if_name=$1; shift + local tc=$1; shift + local tos=$1; shift + local counter_name="rx_green_prio_${tc}" + local ipv4_before + local ipv4_after + local ipv6_before + local ipv6_after + + ipv4_before=$(ethtool_stats_get ${swp1} "${counter_name}") + ping_do ${if_name} $H2_IPV4 "-Q ${tos}" + ipv4_after=$(ethtool_stats_get ${swp1} "${counter_name}") + + if [ $((${ipv4_after} - ${ipv4_before})) -lt ${PING_COUNT} ]; then + RET=1 + else + RET=0 + fi + log_test "IPv4 ${test_name}" + + ipv6_before=$(ethtool_stats_get ${swp1} "${counter_name}") + ping_do ${if_name} $H2_IPV6 "-Q ${tos}" + ipv6_after=$(ethtool_stats_get ${swp1} "${counter_name}") + + if [ $((${ipv6_after} - ${ipv6_before})) -lt ${PING_COUNT} ]; then + RET=1 + else + RET=0 + fi + log_test "IPv6 ${test_name}" +} + +port_default_prio_get() +{ + local if_name=$1 + local prio + + prio="$(dcb -j app show dev ${if_name} default-prio | \ + jq '.default_prio[]')" + if [ -z "${prio}" ]; then + prio=0 + fi + + echo ${prio} +} + +test_port_default() +{ + local orig=$(port_default_prio_get ${swp1}) + local dmac=$(mac_get ${h2}) + + dcb app replace dev ${swp1} default-prio 5 + + run_test "Port-default QoS classification" ${h1} 5 0 + + dcb app replace dev ${swp1} default-prio ${orig} +} + +test_vlan_pcp() +{ + vlans_prepare + + run_test "Trusted VLAN PCP QoS classification" ${h1}.100 3 0 + + vlans_destroy +} + +test_ip_dscp() +{ + local port_default=$(port_default_prio_get ${swp1}) + local tos=$(dscp_cs_to_tos 4) + + dcb app add dev ${swp1} dscp-prio CS4:4 + run_test "Trusted DSCP QoS classification" ${h1} 4 ${tos} + dcb app del dev ${swp1} dscp-prio CS4:4 + + vlans_prepare + run_test "Untrusted DSCP QoS classification follows VLAN PCP" \ + ${h1}.100 3 ${tos} + vlans_destroy + + run_test "Untrusted DSCP QoS classification follows port default" \ + ${h1} ${port_default} ${tos} +} + +trap cleanup EXIT + +ALL_TESTS=" + test_port_default + test_vlan_pcp + test_ip_dscp +" + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/ocelot/psfp.sh b/tools/testing/selftests/drivers/net/ocelot/psfp.sh new file mode 100755 index 0000000000..bed748dde4 --- /dev/null +++ b/tools/testing/selftests/drivers/net/ocelot/psfp.sh @@ -0,0 +1,327 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2021-2022 NXP + +# Note: On LS1028A, in lack of enough user ports, this setup requires patching +# the device tree to use the second CPU port as a user port + +WAIT_TIME=1 +NUM_NETIFS=4 +STABLE_MAC_ADDRS=yes +NETIF_CREATE=no +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/tsn_lib.sh + +UDS_ADDRESS_H1="/var/run/ptp4l_h1" +UDS_ADDRESS_SWP1="/var/run/ptp4l_swp1" + +# Tunables +NUM_PKTS=1000 +STREAM_VID=100 +STREAM_PRIO=6 +# Use a conservative cycle of 10 ms to allow the test to still pass when the +# kernel has some extra overhead like lockdep etc +CYCLE_TIME_NS=10000000 +# Create two Gate Control List entries, one OPEN and one CLOSE, of equal +# durations +GATE_DURATION_NS=$((${CYCLE_TIME_NS} / 2)) +# Give 2/3 of the cycle time to user space and 1/3 to the kernel +FUDGE_FACTOR=$((${CYCLE_TIME_NS} / 3)) +# Shift the isochron base time by half the gate time, so that packets are +# always received by swp1 close to the middle of the time slot, to minimize +# inaccuracies due to network sync +SHIFT_TIME_NS=$((${GATE_DURATION_NS} / 2)) + +h1=${NETIFS[p1]} +swp1=${NETIFS[p2]} +swp2=${NETIFS[p3]} +h2=${NETIFS[p4]} + +H1_IPV4="192.0.2.1" +H2_IPV4="192.0.2.2" +H1_IPV6="2001:db8:1::1" +H2_IPV6="2001:db8:1::2" + +# Chain number exported by the ocelot driver for +# Per-Stream Filtering and Policing filters +PSFP() +{ + echo 30000 +} + +psfp_chain_create() +{ + local if_name=$1 + + tc qdisc add dev $if_name clsact + + tc filter add dev $if_name ingress chain 0 pref 49152 flower \ + skip_sw action goto chain $(PSFP) +} + +psfp_chain_destroy() +{ + local if_name=$1 + + tc qdisc del dev $if_name clsact +} + +psfp_filter_check() +{ + local expected=$1 + local packets="" + local drops="" + local stats="" + + stats=$(tc -j -s filter show dev ${swp1} ingress chain $(PSFP) pref 1) + packets=$(echo ${stats} | jq ".[1].options.actions[].stats.packets") + drops=$(echo ${stats} | jq ".[1].options.actions[].stats.drops") + + if ! [ "${packets}" = "${expected}" ]; then + printf "Expected filter to match on %d packets but matched on %d instead\n" \ + "${expected}" "${packets}" + fi + + echo "Hardware filter reports ${drops} drops" +} + +h1_create() +{ + simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h1_destroy() +{ + simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h2_create() +{ + simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h2_destroy() +{ + simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +switch_create() +{ + local h2_mac_addr=$(mac_get $h2) + + ip link set ${swp1} up + ip link set ${swp2} up + + ip link add br0 type bridge vlan_filtering 1 + ip link set ${swp1} master br0 + ip link set ${swp2} master br0 + ip link set br0 up + + bridge vlan add dev ${swp2} vid ${STREAM_VID} + bridge vlan add dev ${swp1} vid ${STREAM_VID} + # PSFP on Ocelot requires the filter to also be added to the bridge + # FDB, and not be removed + bridge fdb add dev ${swp2} \ + ${h2_mac_addr} vlan ${STREAM_VID} static master + + psfp_chain_create ${swp1} + + tc filter add dev ${swp1} ingress chain $(PSFP) pref 1 \ + protocol 802.1Q flower skip_sw \ + dst_mac ${h2_mac_addr} vlan_id ${STREAM_VID} \ + action gate base-time 0.000000000 \ + sched-entry OPEN ${GATE_DURATION_NS} -1 -1 \ + sched-entry CLOSE ${GATE_DURATION_NS} -1 -1 +} + +switch_destroy() +{ + psfp_chain_destroy ${swp1} + ip link del br0 +} + +txtime_setup() +{ + local if_name=$1 + + tc qdisc add dev ${if_name} clsact + # Classify PTP on TC 7 and isochron on TC 6 + tc filter add dev ${if_name} egress protocol 0x88f7 \ + flower action skbedit priority 7 + tc filter add dev ${if_name} egress protocol 802.1Q \ + flower vlan_ethtype 0xdead action skbedit priority 6 + tc qdisc add dev ${if_name} handle 100: parent root mqprio num_tc 8 \ + queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ + map 0 1 2 3 4 5 6 7 \ + hw 1 + # Set up TC 6 for SO_TXTIME. tc-mqprio queues count from 1. + tc qdisc replace dev ${if_name} parent 100:$((${STREAM_PRIO} + 1)) etf \ + clockid CLOCK_TAI offload delta ${FUDGE_FACTOR} +} + +txtime_cleanup() +{ + local if_name=$1 + + tc qdisc del dev ${if_name} root + tc qdisc del dev ${if_name} clsact +} + +setup_prepare() +{ + vrf_prepare + + h1_create + h2_create + switch_create + + txtime_setup ${h1} + + # Set up swp1 as a master PHC for h1, synchronized to the local + # CLOCK_REALTIME. + phc2sys_start ${UDS_ADDRESS_SWP1} + + # Assumption true for LS1028A: h1 and h2 use the same PHC. So by + # synchronizing h1 to swp1 via PTP, h2 is also implicitly synchronized + # to swp1 (and both to CLOCK_REALTIME). + ptp4l_start ${h1} true ${UDS_ADDRESS_H1} + ptp4l_start ${swp1} false ${UDS_ADDRESS_SWP1} + + # Make sure there are no filter matches at the beginning of the test + psfp_filter_check 0 +} + +cleanup() +{ + pre_cleanup + + ptp4l_stop ${swp1} + ptp4l_stop ${h1} + phc2sys_stop + isochron_recv_stop + + txtime_cleanup ${h1} + + h2_destroy + h1_destroy + switch_destroy + + vrf_cleanup +} + +debug_incorrectly_dropped_packets() +{ + local isochron_dat=$1 + local dropped_seqids + local seqid + + echo "Packets incorrectly dropped:" + + dropped_seqids=$(isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "%u RX hw %T\n" \ + --printf-args "qR" | \ + grep 'RX hw 0.000000000' | \ + awk '{print $1}') + + for seqid in ${dropped_seqids}; do + isochron report \ + --input-file "${isochron_dat}" \ + --start ${seqid} --stop ${seqid} \ + --printf-format "seqid %u scheduled for %T, HW TX timestamp %T\n" \ + --printf-args "qST" + done +} + +debug_incorrectly_received_packets() +{ + local isochron_dat=$1 + + echo "Packets incorrectly received:" + + isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "seqid %u scheduled for %T, HW TX timestamp %T, HW RX timestamp %T\n" \ + --printf-args "qSTR" | + grep -v 'HW RX timestamp 0.000000000' +} + +run_test() +{ + local base_time=$1 + local expected=$2 + local test_name=$3 + local debug=$4 + local isochron_dat="$(mktemp)" + local extra_args="" + local received + + isochron_do \ + "${h1}" \ + "${h2}" \ + "${UDS_ADDRESS_H1}" \ + "" \ + "${base_time}" \ + "${CYCLE_TIME_NS}" \ + "${SHIFT_TIME_NS}" \ + "${NUM_PKTS}" \ + "${STREAM_VID}" \ + "${STREAM_PRIO}" \ + "" \ + "${isochron_dat}" + + # Count all received packets by looking at the non-zero RX timestamps + received=$(isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "%u\n" --printf-args "R" | \ + grep -w -v '0' | wc -l) + + if [ "${received}" = "${expected}" ]; then + RET=0 + else + RET=1 + echo "Expected isochron to receive ${expected} packets but received ${received}" + fi + + log_test "${test_name}" + + if [ "$RET" = "1" ]; then + ${debug} "${isochron_dat}" + fi + + rm ${isochron_dat} 2> /dev/null +} + +test_gate_in_band() +{ + # Send packets in-band with the OPEN gate entry + run_test 0.000000000 ${NUM_PKTS} "In band" \ + debug_incorrectly_dropped_packets + + psfp_filter_check ${NUM_PKTS} +} + +test_gate_out_of_band() +{ + # Send packets in-band with the CLOSE gate entry + run_test 0.005000000 0 "Out of band" \ + debug_incorrectly_received_packets + + psfp_filter_check $((2 * ${NUM_PKTS})) +} + +trap cleanup EXIT + +ALL_TESTS=" + test_gate_in_band + test_gate_out_of_band +" + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh new file mode 100755 index 0000000000..aff0a59f92 --- /dev/null +++ b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh @@ -0,0 +1,352 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2020 NXP + +WAIT_TIME=1 +NUM_NETIFS=4 +STABLE_MAC_ADDRS=yes +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +require_command tcpdump + +h1=${NETIFS[p1]} +swp1=${NETIFS[p2]} +swp2=${NETIFS[p3]} +h2=${NETIFS[p4]} + +# Helpers to map a VCAP IS1 and VCAP IS2 lookup and policy to a chain number +# used by the kernel driver. The numbers are: +# VCAP IS1 lookup 0: 10000 +# VCAP IS1 lookup 1: 11000 +# VCAP IS1 lookup 2: 12000 +# VCAP IS2 lookup 0 policy 0: 20000 +# VCAP IS2 lookup 0 policy 1: 20001 +# VCAP IS2 lookup 0 policy 255: 20255 +# VCAP IS2 lookup 1 policy 0: 21000 +# VCAP IS2 lookup 1 policy 1: 21001 +# VCAP IS2 lookup 1 policy 255: 21255 +IS1() +{ + local lookup=$1 + + echo $((10000 + 1000 * lookup)) +} + +IS2() +{ + local lookup=$1 + local pag=$2 + + echo $((20000 + 1000 * lookup + pag)) +} + +ES0() +{ + echo 0 +} + +# The Ocelot switches have a fixed ingress pipeline composed of: +# +# +----------------------------------------------+ +-----------------------------------------+ +# | VCAP IS1 | | VCAP IS2 | +# | | | | +# | +----------+ +----------+ +----------+ | | +----------+ +----------+ | +# | | Lookup 0 | | Lookup 1 | | Lookup 2 | | --+------> PAG 0: | Lookup 0 | -> | Lookup 1 | | +# | +----------+ -> +----------+ -> +----------+ | | | +----------+ +----------+ | +# | |key&action| |key&action| |key&action| | | | |key&action| |key&action| | +# | |key&action| |key&action| |key&action| | | | | .. | | .. | | +# | | .. | | .. | | .. | | | | +----------+ +----------+ | +# | +----------+ +----------+ +----------+ | | | | +# | selects PAG | | | +----------+ +----------+ | +# +----------------------------------------------+ +------> PAG 1: | Lookup 0 | -> | Lookup 1 | | +# | | +----------+ +----------+ | +# | | |key&action| |key&action| | +# | | | .. | | .. | | +# | | +----------+ +----------+ | +# | | ... | +# | | | +# | | +----------+ +----------+ | +# +----> PAG 254: | Lookup 0 | -> | Lookup 1 | | +# | | +----------+ +----------+ | +# | | |key&action| |key&action| | +# | | | .. | | .. | | +# | | +----------+ +----------+ | +# | | | +# | | +----------+ +----------+ | +# +----> PAG 255: | Lookup 0 | -> | Lookup 1 | | +# | +----------+ +----------+ | +# | |key&action| |key&action| | +# | | .. | | .. | | +# | +----------+ +----------+ | +# +-----------------------------------------+ +# +# Both the VCAP IS1 (Ingress Stage 1) and IS2 (Ingress Stage 2) are indexed +# (looked up) multiple times: IS1 3 times, and IS2 2 times. Each filter +# (key and action pair) can be configured to only match during the first, or +# second, etc, lookup. +# +# During one TCAM lookup, the filter processing stops at the first entry that +# matches, then the pipeline jumps to the next lookup. +# The driver maps each individual lookup of each individual ingress TCAM to a +# separate chain number. For correct rule offloading, it is mandatory that each +# filter installed in one TCAM is terminated by a non-optional GOTO action to +# the next lookup from the fixed pipeline. +# +# A chain can only be used if there is a GOTO action correctly set up from the +# prior lookup in the processing pipeline. Setting up all chains is not +# mandatory. + +# NOTE: VCAP IS1 currently uses only S1_NORMAL half keys and VCAP IS2 +# dynamically chooses between MAC_ETYPE, ARP, IP4_TCP_UDP, IP4_OTHER, which are +# all half keys as well. + +create_tcam_skeleton() +{ + local eth=$1 + + tc qdisc add dev $eth clsact + + # VCAP IS1 is the Ingress Classification TCAM and can offload the + # following actions: + # - skbedit priority + # - vlan pop + # - vlan modify + # - goto (only in lookup 2, the last IS1 lookup) + tc filter add dev $eth ingress chain 0 pref 49152 flower \ + skip_sw action goto chain $(IS1 0) + tc filter add dev $eth ingress chain $(IS1 0) pref 49152 \ + flower skip_sw action goto chain $(IS1 1) + tc filter add dev $eth ingress chain $(IS1 1) pref 49152 \ + flower skip_sw action goto chain $(IS1 2) + tc filter add dev $eth ingress chain $(IS1 2) pref 49152 \ + flower skip_sw action goto chain $(IS2 0 0) + + # VCAP IS2 is the Security Enforcement ingress TCAM and can offload the + # following actions: + # - trap + # - drop + # - police + # The two VCAP IS2 lookups can be segmented into up to 256 groups of + # rules, called Policies. A Policy is selected through the Policy + # Association Group (PAG) action of VCAP IS1 (which is the + # GOTO offload). + tc filter add dev $eth ingress chain $(IS2 0 0) pref 49152 \ + flower skip_sw action goto chain $(IS2 1 0) +} + +setup_prepare() +{ + ip link set $swp1 up + ip link set $swp2 up + ip link set $h2 up + ip link set $h1 up + + create_tcam_skeleton $swp1 + + ip link add br0 type bridge + ip link set $swp1 master br0 + ip link set $swp2 master br0 + ip link set br0 up + + ip link add link $h1 name $h1.100 type vlan id 100 + ip link set $h1.100 up + + ip link add link $h1 name $h1.200 type vlan id 200 + ip link set $h1.200 up + + tc filter add dev $swp1 ingress chain $(IS1 1) pref 1 \ + protocol 802.1Q flower skip_sw vlan_id 100 \ + action vlan pop \ + action goto chain $(IS1 2) + + tc filter add dev $swp1 egress chain $(ES0) pref 1 \ + flower skip_sw indev $swp2 \ + action vlan push protocol 802.1Q id 100 + + tc filter add dev $swp1 ingress chain $(IS1 0) pref 2 \ + protocol ipv4 flower skip_sw src_ip 10.1.1.2 \ + action skbedit priority 7 \ + action goto chain $(IS1 1) + + tc filter add dev $swp1 ingress chain $(IS2 0 0) pref 1 \ + protocol ipv4 flower skip_sw ip_proto udp dst_port 5201 \ + action police rate 50mbit burst 64k conform-exceed drop/pipe \ + action goto chain $(IS2 1 0) +} + +cleanup() +{ + ip link del $h1.200 + ip link del $h1.100 + tc qdisc del dev $swp1 clsact + ip link del br0 +} + +test_vlan_pop() +{ + local h1_mac=$(mac_get $h1) + local h2_mac=$(mac_get $h2) + + RET=0 + + tcpdump_start $h2 + + # Work around Mausezahn VLAN builder bug + # (https://github.com/netsniff-ng/netsniff-ng/issues/225) by using + # an 8021q upper + $MZ $h1.100 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip + + sleep 1 + + tcpdump_stop $h2 + + tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, ethertype IPv4" + check_err "$?" "untagged reception" + + tcpdump_cleanup $h2 + + log_test "VLAN pop" +} + +test_vlan_push() +{ + local h1_mac=$(mac_get $h1) + local h2_mac=$(mac_get $h2) + + RET=0 + + tcpdump_start $h1.100 + + $MZ $h2 -q -c 1 -p 64 -a $h2_mac -b $h1_mac -t ip + + sleep 1 + + tcpdump_stop $h1.100 + + tcpdump_show $h1.100 | grep -q "$h2_mac > $h1_mac" + check_err "$?" "tagged reception" + + tcpdump_cleanup $h1.100 + + log_test "VLAN push" +} + +test_vlan_ingress_modify() +{ + local h1_mac=$(mac_get $h1) + local h2_mac=$(mac_get $h2) + + RET=0 + + ip link set br0 type bridge vlan_filtering 1 + bridge vlan add dev $swp1 vid 200 + bridge vlan add dev $swp1 vid 300 + bridge vlan add dev $swp2 vid 300 + + tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \ + protocol 802.1Q flower skip_sw vlan_id 200 src_mac $h1_mac \ + action vlan modify id 300 \ + action goto chain $(IS2 0 0) + + tcpdump_start $h2 + + $MZ $h1.200 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip + + sleep 1 + + tcpdump_stop $h2 + + tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, .* vlan 300" + check_err "$?" "tagged reception" + + tcpdump_cleanup $h2 + + tc filter del dev $swp1 ingress chain $(IS1 2) pref 3 + + bridge vlan del dev $swp1 vid 200 + bridge vlan del dev $swp1 vid 300 + bridge vlan del dev $swp2 vid 300 + ip link set br0 type bridge vlan_filtering 0 + + log_test "Ingress VLAN modification" +} + +test_vlan_egress_modify() +{ + local h1_mac=$(mac_get $h1) + local h2_mac=$(mac_get $h2) + + RET=0 + + tc qdisc add dev $swp2 clsact + + ip link set br0 type bridge vlan_filtering 1 + bridge vlan add dev $swp1 vid 200 + bridge vlan add dev $swp2 vid 200 + + tc filter add dev $swp2 egress chain $(ES0) pref 3 \ + protocol 802.1Q flower skip_sw vlan_id 200 vlan_prio 0 \ + action vlan modify id 300 priority 7 + + tcpdump_start $h2 + + $MZ $h1.200 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip + + sleep 1 + + tcpdump_stop $h2 + + tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, .* vlan 300" + check_err "$?" "tagged reception" + + tcpdump_cleanup $h2 + + tc filter del dev $swp2 egress chain $(ES0) pref 3 + tc qdisc del dev $swp2 clsact + + bridge vlan del dev $swp1 vid 200 + bridge vlan del dev $swp2 vid 200 + ip link set br0 type bridge vlan_filtering 0 + + log_test "Egress VLAN modification" +} + +test_skbedit_priority() +{ + local h1_mac=$(mac_get $h1) + local h2_mac=$(mac_get $h2) + local num_pkts=100 + + before=$(ethtool_stats_get $swp1 'rx_green_prio_7') + + $MZ $h1 -q -c $num_pkts -p 64 -a $h1_mac -b $h2_mac -t ip -A 10.1.1.2 + + after=$(ethtool_stats_get $swp1 'rx_green_prio_7') + + if [ $((after - before)) = $num_pkts ]; then + RET=0 + else + RET=1 + fi + + log_test "Frame prioritization" +} + +trap cleanup EXIT + +ALL_TESTS=" + test_vlan_pop + test_vlan_push + test_vlan_ingress_modify + test_vlan_egress_modify + test_skbedit_priority +" + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/team/Makefile b/tools/testing/selftests/drivers/net/team/Makefile new file mode 100644 index 0000000000..6a86e61e8b --- /dev/null +++ b/tools/testing/selftests/drivers/net/team/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 +# Makefile for net selftests + +TEST_PROGS := dev_addr_lists.sh + +TEST_FILES := \ + lag_lib.sh \ + net_forwarding_lib.sh + +include ../../../lib.mk diff --git a/tools/testing/selftests/drivers/net/team/config b/tools/testing/selftests/drivers/net/team/config new file mode 100644 index 0000000000..265b6882cc --- /dev/null +++ b/tools/testing/selftests/drivers/net/team/config @@ -0,0 +1,3 @@ +CONFIG_NET_TEAM=y +CONFIG_NET_TEAM_MODE_LOADBALANCE=y +CONFIG_MACVLAN=y diff --git a/tools/testing/selftests/drivers/net/team/dev_addr_lists.sh b/tools/testing/selftests/drivers/net/team/dev_addr_lists.sh new file mode 100755 index 0000000000..33913112d5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/team/dev_addr_lists.sh @@ -0,0 +1,51 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test team device handling of addr lists (dev->uc, mc) +# + +ALL_TESTS=" + team_cleanup +" + +REQUIRE_MZ=no +NUM_NETIFS=0 +lib_dir=$(dirname "$0") +source "$lib_dir"/net_forwarding_lib.sh + +source "$lib_dir"/lag_lib.sh + + +destroy() +{ + local ifnames=(dummy1 dummy2 team0 mv0) + local ifname + + for ifname in "${ifnames[@]}"; do + ip link del "$ifname" &>/dev/null + done +} + +cleanup() +{ + pre_cleanup + + destroy +} + + +team_cleanup() +{ + RET=0 + + test_LAG_cleanup "team" "lacp" +} + + +require_command teamd + +trap cleanup EXIT + +tests_run + +exit "$EXIT_STATUS" diff --git a/tools/testing/selftests/drivers/net/team/lag_lib.sh b/tools/testing/selftests/drivers/net/team/lag_lib.sh new file mode 120000 index 0000000000..e1347a10af --- /dev/null +++ b/tools/testing/selftests/drivers/net/team/lag_lib.sh @@ -0,0 +1 @@ +../bonding/lag_lib.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/team/net_forwarding_lib.sh b/tools/testing/selftests/drivers/net/team/net_forwarding_lib.sh new file mode 120000 index 0000000000..39c96828c5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/team/net_forwarding_lib.sh @@ -0,0 +1 @@ +../../../net/forwarding/lib.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/s390x/uvdevice/Makefile b/tools/testing/selftests/drivers/s390x/uvdevice/Makefile new file mode 100644 index 0000000000..755d164384 --- /dev/null +++ b/tools/testing/selftests/drivers/s390x/uvdevice/Makefile @@ -0,0 +1,20 @@ +include ../../../../../build/Build.include + +UNAME_M := $(shell uname -m) + +ifneq ($(UNAME_M),s390x) +nothing: +.PHONY: all clean run_tests install +.SILENT: +else + +TEST_GEN_PROGS := test_uvdevice + +top_srcdir ?= ../../../../../.. +LINUX_TOOL_ARCH_INCLUDE = $(top_srcdir)/tools/arch/$(ARCH)/include + +CFLAGS += -Wall -Werror -static $(KHDR_INCLUDES) -I$(LINUX_TOOL_ARCH_INCLUDE) + +include ../../../lib.mk + +endif diff --git a/tools/testing/selftests/drivers/s390x/uvdevice/config b/tools/testing/selftests/drivers/s390x/uvdevice/config new file mode 100644 index 0000000000..f28a04b99e --- /dev/null +++ b/tools/testing/selftests/drivers/s390x/uvdevice/config @@ -0,0 +1 @@ +CONFIG_S390_UV_UAPI=y diff --git a/tools/testing/selftests/drivers/s390x/uvdevice/test_uvdevice.c b/tools/testing/selftests/drivers/s390x/uvdevice/test_uvdevice.c new file mode 100644 index 0000000000..ea0cdc37b4 --- /dev/null +++ b/tools/testing/selftests/drivers/s390x/uvdevice/test_uvdevice.c @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * selftest for the Ultravisor UAPI device + * + * Copyright IBM Corp. 2022 + * Author(s): Steffen Eiden <seiden@linux.ibm.com> + */ + +#include <stdint.h> +#include <fcntl.h> +#include <errno.h> +#include <sys/ioctl.h> +#include <sys/mman.h> + +#include <asm/uvdevice.h> + +#include "../../../kselftest_harness.h" + +#define UV_PATH "/dev/uv" +#define BUFFER_SIZE 0x200 +FIXTURE(uvio_fixture) { + int uv_fd; + struct uvio_ioctl_cb uvio_ioctl; + uint8_t buffer[BUFFER_SIZE]; + __u64 fault_page; +}; + +FIXTURE_VARIANT(uvio_fixture) { + unsigned long ioctl_cmd; + uint32_t arg_size; +}; + +FIXTURE_VARIANT_ADD(uvio_fixture, att) { + .ioctl_cmd = UVIO_IOCTL_ATT, + .arg_size = sizeof(struct uvio_attest), +}; + +FIXTURE_SETUP(uvio_fixture) +{ + self->uv_fd = open(UV_PATH, O_ACCMODE); + + self->uvio_ioctl.argument_addr = (__u64)self->buffer; + self->uvio_ioctl.argument_len = variant->arg_size; + self->fault_page = + (__u64)mmap(NULL, (size_t)getpagesize(), PROT_NONE, MAP_ANONYMOUS, -1, 0); +} + +FIXTURE_TEARDOWN(uvio_fixture) +{ + if (self->uv_fd) + close(self->uv_fd); + munmap((void *)self->fault_page, (size_t)getpagesize()); +} + +TEST_F(uvio_fixture, fault_ioctl_arg) +{ + int rc, errno_cache; + + rc = ioctl(self->uv_fd, variant->ioctl_cmd, NULL); + errno_cache = errno; + ASSERT_EQ(rc, -1); + ASSERT_EQ(errno_cache, EFAULT); + + rc = ioctl(self->uv_fd, variant->ioctl_cmd, self->fault_page); + errno_cache = errno; + ASSERT_EQ(rc, -1); + ASSERT_EQ(errno_cache, EFAULT); +} + +TEST_F(uvio_fixture, fault_uvio_arg) +{ + int rc, errno_cache; + + self->uvio_ioctl.argument_addr = 0; + rc = ioctl(self->uv_fd, variant->ioctl_cmd, &self->uvio_ioctl); + errno_cache = errno; + ASSERT_EQ(rc, -1); + ASSERT_EQ(errno_cache, EFAULT); + + self->uvio_ioctl.argument_addr = self->fault_page; + rc = ioctl(self->uv_fd, variant->ioctl_cmd, &self->uvio_ioctl); + errno_cache = errno; + ASSERT_EQ(rc, -1); + ASSERT_EQ(errno_cache, EFAULT); +} + +/* + * Test to verify that IOCTLs with invalid values in the ioctl_control block + * are rejected. + */ +TEST_F(uvio_fixture, inval_ioctl_cb) +{ + int rc, errno_cache; + + self->uvio_ioctl.argument_len = 0; + rc = ioctl(self->uv_fd, variant->ioctl_cmd, &self->uvio_ioctl); + errno_cache = errno; + ASSERT_EQ(rc, -1); + ASSERT_EQ(errno_cache, EINVAL); + + self->uvio_ioctl.argument_len = (uint32_t)-1; + rc = ioctl(self->uv_fd, variant->ioctl_cmd, &self->uvio_ioctl); + errno_cache = errno; + ASSERT_EQ(rc, -1); + ASSERT_EQ(errno_cache, EINVAL); + self->uvio_ioctl.argument_len = variant->arg_size; + + self->uvio_ioctl.flags = (uint32_t)-1; + rc = ioctl(self->uv_fd, variant->ioctl_cmd, &self->uvio_ioctl); + errno_cache = errno; + ASSERT_EQ(rc, -1); + ASSERT_EQ(errno_cache, EINVAL); + self->uvio_ioctl.flags = 0; + + memset(self->uvio_ioctl.reserved14, 0xff, sizeof(self->uvio_ioctl.reserved14)); + rc = ioctl(self->uv_fd, variant->ioctl_cmd, &self->uvio_ioctl); + errno_cache = errno; + ASSERT_EQ(rc, -1); + ASSERT_EQ(errno_cache, EINVAL); + + memset(&self->uvio_ioctl, 0x11, sizeof(self->uvio_ioctl)); + rc = ioctl(self->uv_fd, variant->ioctl_cmd, &self->uvio_ioctl); + ASSERT_EQ(rc, -1); +} + +TEST_F(uvio_fixture, inval_ioctl_cmd) +{ + int rc, errno_cache; + uint8_t nr = _IOC_NR(variant->ioctl_cmd); + unsigned long cmds[] = { + _IOWR('a', nr, struct uvio_ioctl_cb), + _IOWR(UVIO_TYPE_UVC, nr, int), + _IO(UVIO_TYPE_UVC, nr), + _IOR(UVIO_TYPE_UVC, nr, struct uvio_ioctl_cb), + _IOW(UVIO_TYPE_UVC, nr, struct uvio_ioctl_cb), + }; + + for (size_t i = 0; i < ARRAY_SIZE(cmds); i++) { + rc = ioctl(self->uv_fd, cmds[i], &self->uvio_ioctl); + errno_cache = errno; + ASSERT_EQ(rc, -1); + ASSERT_EQ(errno_cache, ENOTTY); + } +} + +struct test_attest_buffer { + uint8_t arcb[0x180]; + uint8_t meas[64]; + uint8_t add[32]; +}; + +FIXTURE(attest_fixture) { + int uv_fd; + struct uvio_ioctl_cb uvio_ioctl; + struct uvio_attest uvio_attest; + struct test_attest_buffer attest_buffer; + __u64 fault_page; +}; + +FIXTURE_SETUP(attest_fixture) +{ + self->uv_fd = open(UV_PATH, O_ACCMODE); + + self->uvio_ioctl.argument_addr = (__u64)&self->uvio_attest; + self->uvio_ioctl.argument_len = sizeof(self->uvio_attest); + + self->uvio_attest.arcb_addr = (__u64)&self->attest_buffer.arcb; + self->uvio_attest.arcb_len = sizeof(self->attest_buffer.arcb); + + self->uvio_attest.meas_addr = (__u64)&self->attest_buffer.meas; + self->uvio_attest.meas_len = sizeof(self->attest_buffer.meas); + + self->uvio_attest.add_data_addr = (__u64)&self->attest_buffer.add; + self->uvio_attest.add_data_len = sizeof(self->attest_buffer.add); + self->fault_page = + (__u64)mmap(NULL, (size_t)getpagesize(), PROT_NONE, MAP_ANONYMOUS, -1, 0); +} + +FIXTURE_TEARDOWN(attest_fixture) +{ + if (self->uv_fd) + close(self->uv_fd); + munmap((void *)self->fault_page, (size_t)getpagesize()); +} + +static void att_inval_sizes_test(uint32_t *size, uint32_t max_size, bool test_zero, + struct __test_metadata *_metadata, + FIXTURE_DATA(attest_fixture) *self) +{ + int rc, errno_cache; + uint32_t tmp = *size; + + if (test_zero) { + *size = 0; + rc = ioctl(self->uv_fd, UVIO_IOCTL_ATT, &self->uvio_ioctl); + errno_cache = errno; + ASSERT_EQ(rc, -1); + ASSERT_EQ(errno_cache, EINVAL); + } + *size = max_size + 1; + rc = ioctl(self->uv_fd, UVIO_IOCTL_ATT, &self->uvio_ioctl); + errno_cache = errno; + ASSERT_EQ(rc, -1); + ASSERT_EQ(errno_cache, EINVAL); + *size = tmp; +} + +/* + * Test to verify that attestation IOCTLs with invalid values in the UVIO + * attestation control block are rejected. + */ +TEST_F(attest_fixture, att_inval_request) +{ + int rc, errno_cache; + + att_inval_sizes_test(&self->uvio_attest.add_data_len, UVIO_ATT_ADDITIONAL_MAX_LEN, + false, _metadata, self); + att_inval_sizes_test(&self->uvio_attest.meas_len, UVIO_ATT_MEASUREMENT_MAX_LEN, + true, _metadata, self); + att_inval_sizes_test(&self->uvio_attest.arcb_len, UVIO_ATT_ARCB_MAX_LEN, + true, _metadata, self); + + self->uvio_attest.reserved136 = (uint16_t)-1; + rc = ioctl(self->uv_fd, UVIO_IOCTL_ATT, &self->uvio_ioctl); + errno_cache = errno; + ASSERT_EQ(rc, -1); + ASSERT_EQ(errno_cache, EINVAL); + + memset(&self->uvio_attest, 0x11, sizeof(self->uvio_attest)); + rc = ioctl(self->uv_fd, UVIO_IOCTL_ATT, &self->uvio_ioctl); + ASSERT_EQ(rc, -1); +} + +static void att_inval_addr_test(__u64 *addr, struct __test_metadata *_metadata, + FIXTURE_DATA(attest_fixture) *self) +{ + int rc, errno_cache; + __u64 tmp = *addr; + + *addr = 0; + rc = ioctl(self->uv_fd, UVIO_IOCTL_ATT, &self->uvio_ioctl); + errno_cache = errno; + ASSERT_EQ(rc, -1); + ASSERT_EQ(errno_cache, EFAULT); + *addr = self->fault_page; + rc = ioctl(self->uv_fd, UVIO_IOCTL_ATT, &self->uvio_ioctl); + errno_cache = errno; + ASSERT_EQ(rc, -1); + ASSERT_EQ(errno_cache, EFAULT); + *addr = tmp; +} + +TEST_F(attest_fixture, att_inval_addr) +{ + att_inval_addr_test(&self->uvio_attest.arcb_addr, _metadata, self); + att_inval_addr_test(&self->uvio_attest.add_data_addr, _metadata, self); + att_inval_addr_test(&self->uvio_attest.meas_addr, _metadata, self); +} + +static void __attribute__((constructor)) __constructor_order_last(void) +{ + if (!__constructor_order) + __constructor_order = _CONSTRUCTOR_ORDER_BACKWARD; +} + +int main(int argc, char **argv) +{ + int fd = open(UV_PATH, O_ACCMODE); + + if (fd < 0) + ksft_exit_skip("No uv-device or cannot access " UV_PATH "\n" + "Enable CONFIG_S390_UV_UAPI and check the access rights on " + UV_PATH ".\n"); + close(fd); + return test_harness_run(argc, argv); +} diff --git a/tools/testing/selftests/drivers/sdsi/sdsi.sh b/tools/testing/selftests/drivers/sdsi/sdsi.sh new file mode 100755 index 0000000000..9b84b9b82b --- /dev/null +++ b/tools/testing/selftests/drivers/sdsi/sdsi.sh @@ -0,0 +1,25 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# Runs tests for the intel_sdsi driver + +if ! command -v python3 > /dev/null 2>&1; then + echo "drivers/sdsi: [SKIP] python3 not installed" + exit 77 +fi + +if ! python3 -c "import pytest" > /dev/null 2>&1; then + echo "drivers/sdsi: [SKIP] pytest module not installed" + exit 77 +fi + +if ! /sbin/modprobe -q -r intel_sdsi; then + echo "drivers/sdsi: [SKIP]" + exit 77 +fi + +if /sbin/modprobe -q intel_sdsi && python3 -m pytest sdsi_test.py; then + echo "drivers/sdsi: [OK]" +else + echo "drivers/sdsi: [FAIL]" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/sdsi/sdsi_test.py b/tools/testing/selftests/drivers/sdsi/sdsi_test.py new file mode 100644 index 0000000000..5efb29feee --- /dev/null +++ b/tools/testing/selftests/drivers/sdsi/sdsi_test.py @@ -0,0 +1,226 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +from struct import pack +from time import sleep + +import errno +import glob +import os +import subprocess + +try: + import pytest +except ImportError: + print("Unable to import pytest python module.") + print("\nIf not already installed, you may do so with:") + print("\t\tpip3 install pytest") + exit(1) + +SOCKETS = glob.glob('/sys/bus/auxiliary/devices/intel_vsec.sdsi.*') +NUM_SOCKETS = len(SOCKETS) + +MODULE_NAME = 'intel_sdsi' +DEV_PREFIX = 'intel_vsec.sdsi' +CLASS_DIR = '/sys/bus/auxiliary/devices' +GUID = "0x6dd191" + +def read_bin_file(file): + with open(file, mode='rb') as f: + content = f.read() + return content + +def get_dev_file_path(socket, file): + return CLASS_DIR + '/' + DEV_PREFIX + '.' + str(socket) + '/' + file + +def kmemleak_enabled(): + kmemleak = "/sys/kernel/debug/kmemleak" + return os.path.isfile(kmemleak) + +class TestSDSiDriver: + def test_driver_loaded(self): + lsmod_p = subprocess.Popen(('lsmod'), stdout=subprocess.PIPE) + result = subprocess.check_output(('grep', '-q', MODULE_NAME), stdin=lsmod_p.stdout) + +@pytest.mark.parametrize('socket', range(0, NUM_SOCKETS)) +class TestSDSiFilesClass: + + def read_value(self, file): + f = open(file, "r") + value = f.read().strip("\n") + return value + + def get_dev_folder(self, socket): + return CLASS_DIR + '/' + DEV_PREFIX + '.' + str(socket) + '/' + + def test_sysfs_files_exist(self, socket): + folder = self.get_dev_folder(socket) + print (folder) + assert os.path.isfile(folder + "guid") == True + assert os.path.isfile(folder + "provision_akc") == True + assert os.path.isfile(folder + "provision_cap") == True + assert os.path.isfile(folder + "state_certificate") == True + assert os.path.isfile(folder + "registers") == True + + def test_sysfs_file_permissions(self, socket): + folder = self.get_dev_folder(socket) + mode = os.stat(folder + "guid").st_mode & 0o777 + assert mode == 0o444 # Read all + mode = os.stat(folder + "registers").st_mode & 0o777 + assert mode == 0o400 # Read owner + mode = os.stat(folder + "provision_akc").st_mode & 0o777 + assert mode == 0o200 # Read owner + mode = os.stat(folder + "provision_cap").st_mode & 0o777 + assert mode == 0o200 # Read owner + mode = os.stat(folder + "state_certificate").st_mode & 0o777 + assert mode == 0o400 # Read owner + + def test_sysfs_file_ownership(self, socket): + folder = self.get_dev_folder(socket) + + st = os.stat(folder + "guid") + assert st.st_uid == 0 + assert st.st_gid == 0 + + st = os.stat(folder + "registers") + assert st.st_uid == 0 + assert st.st_gid == 0 + + st = os.stat(folder + "provision_akc") + assert st.st_uid == 0 + assert st.st_gid == 0 + + st = os.stat(folder + "provision_cap") + assert st.st_uid == 0 + assert st.st_gid == 0 + + st = os.stat(folder + "state_certificate") + assert st.st_uid == 0 + assert st.st_gid == 0 + + def test_sysfs_file_sizes(self, socket): + folder = self.get_dev_folder(socket) + + if self.read_value(folder + "guid") == GUID: + st = os.stat(folder + "registers") + assert st.st_size == 72 + + st = os.stat(folder + "provision_akc") + assert st.st_size == 1024 + + st = os.stat(folder + "provision_cap") + assert st.st_size == 1024 + + st = os.stat(folder + "state_certificate") + assert st.st_size == 4096 + + def test_no_seek_allowed(self, socket): + folder = self.get_dev_folder(socket) + rand_file = bytes(os.urandom(8)) + + f = open(folder + "provision_cap", "wb", 0) + f.seek(1) + with pytest.raises(OSError) as error: + f.write(rand_file) + assert error.value.errno == errno.ESPIPE + f.close() + + f = open(folder + "provision_akc", "wb", 0) + f.seek(1) + with pytest.raises(OSError) as error: + f.write(rand_file) + assert error.value.errno == errno.ESPIPE + f.close() + + def test_registers_seek(self, socket): + folder = self.get_dev_folder(socket) + + # Check that the value read from an offset of the entire + # file is none-zero and the same as the value read + # from seeking to the same location + f = open(folder + "registers", "rb") + data = f.read() + f.seek(64) + id = f.read() + assert id != bytes(0) + assert data[64:] == id + f.close() + +@pytest.mark.parametrize('socket', range(0, NUM_SOCKETS)) +class TestSDSiMailboxCmdsClass: + def test_provision_akc_eoverflow_1017_bytes(self, socket): + + # The buffer for writes is 1k, of with 8 bytes must be + # reserved for the command, leaving 1016 bytes max. + # Check that we get an overflow error for 1017 bytes. + node = get_dev_file_path(socket, "provision_akc") + rand_file = bytes(os.urandom(1017)) + + f = open(node, 'wb', 0) + with pytest.raises(OSError) as error: + f.write(rand_file) + assert error.value.errno == errno.EOVERFLOW + f.close() + +@pytest.mark.parametrize('socket', range(0, NUM_SOCKETS)) +class TestSdsiDriverLocksClass: + def test_enodev_when_pci_device_removed(self, socket): + node = get_dev_file_path(socket, "provision_akc") + dev_name = DEV_PREFIX + '.' + str(socket) + driver_dir = CLASS_DIR + '/' + dev_name + "/driver/" + rand_file = bytes(os.urandom(8)) + + f = open(node, 'wb', 0) + g = open(node, 'wb', 0) + + with open(driver_dir + 'unbind', 'w') as k: + print(dev_name, file = k) + + with pytest.raises(OSError) as error: + f.write(rand_file) + assert error.value.errno == errno.ENODEV + + with pytest.raises(OSError) as error: + g.write(rand_file) + assert error.value.errno == errno.ENODEV + + f.close() + g.close() + + # Short wait needed to allow file to close before pulling driver + sleep(1) + + p = subprocess.Popen(('modprobe', '-r', 'intel_sdsi')) + p.wait() + p = subprocess.Popen(('modprobe', '-r', 'intel_vsec')) + p.wait() + p = subprocess.Popen(('modprobe', 'intel_vsec')) + p.wait() + + # Short wait needed to allow driver time to get inserted + # before continuing tests + sleep(1) + + def test_memory_leak(self, socket): + if not kmemleak_enabled(): + pytest.skip("kmemleak not enabled in kernel") + + dev_name = DEV_PREFIX + '.' + str(socket) + driver_dir = CLASS_DIR + '/' + dev_name + "/driver/" + + with open(driver_dir + 'unbind', 'w') as k: + print(dev_name, file = k) + + sleep(1) + + subprocess.check_output(('modprobe', '-r', 'intel_sdsi')) + subprocess.check_output(('modprobe', '-r', 'intel_vsec')) + + with open('/sys/kernel/debug/kmemleak', 'w') as f: + print('scan', file = f) + sleep(5) + + assert os.stat('/sys/kernel/debug/kmemleak').st_size == 0 + + subprocess.check_output(('modprobe', 'intel_vsec')) + sleep(1) diff --git a/tools/testing/selftests/drivers/usb/usbip/usbip_test.sh b/tools/testing/selftests/drivers/usb/usbip/usbip_test.sh new file mode 100755 index 0000000000..128f0ab243 --- /dev/null +++ b/tools/testing/selftests/drivers/usb/usbip/usbip_test.sh @@ -0,0 +1,200 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +usage() { echo "usbip_test.sh -b <busid> -p <usbip tools path>"; exit 1; } + +while getopts "h:b:p:" arg; do + case "${arg}" in + h) + usage + ;; + b) + busid=${OPTARG} + ;; + p) + tools_path=${OPTARG} + ;; + *) + usage + ;; + esac +done +shift $((OPTIND-1)) + +if [ -z "${busid}" ]; then + usage +fi + +echo "Running USB over IP Testing on $busid"; + +test_end_msg="End of USB over IP Testing on $busid" + +if [ $UID != 0 ]; then + echo "Please run usbip_test as root [SKIP]" + echo $test_end_msg + exit $ksft_skip +fi + +echo "Load usbip_host module" +if ! /sbin/modprobe -q -n usbip_host; then + echo "usbip_test: module usbip_host is not found [SKIP]" + echo $test_end_msg + exit $ksft_skip +fi + +if /sbin/modprobe -q usbip_host; then + echo "usbip_test: module usbip_host is loaded [OK]" +else + echo "usbip_test: module usbip_host failed to load [FAIL]" + echo $test_end_msg + exit 1 +fi + +echo "Load vhci_hcd module" +if /sbin/modprobe -q vhci_hcd; then + echo "usbip_test: module vhci_hcd is loaded [OK]" +else + echo "usbip_test: module vhci_hcd failed to load [FAIL]" + echo $test_end_msg + exit 1 +fi +echo "==============================================================" + +cd $tools_path; + +if [ ! -f src/usbip ]; then + echo "Please build usbip tools" + echo $test_end_msg + exit $ksft_skip +fi + +echo "Expect to see export-able devices"; +src/usbip list -l; +echo "==============================================================" + +echo "Run lsusb to see all usb devices" +lsusb -t; +echo "==============================================================" + +src/usbipd -D; + +echo "Get exported devices from localhost - expect to see none"; +src/usbip list -r localhost; +echo "==============================================================" + +echo "bind devices"; +src/usbip bind -b $busid; +echo "==============================================================" + +echo "Run lsusb - bound devices should be under usbip_host control" +lsusb -t; +echo "==============================================================" + +echo "bind devices - expect already bound messages" +src/usbip bind -b $busid; +echo "==============================================================" + +echo "Get exported devices from localhost - expect to see exported devices"; +src/usbip list -r localhost; +echo "==============================================================" + +echo "unbind devices"; +src/usbip unbind -b $busid; +echo "==============================================================" + +echo "Run lsusb - bound devices should be rebound to original drivers" +lsusb -t; +echo "==============================================================" + +echo "unbind devices - expect no devices bound message"; +src/usbip unbind -b $busid; +echo "==============================================================" + +echo "Get exported devices from localhost - expect to see none"; +src/usbip list -r localhost; +echo "==============================================================" + +echo "List imported devices - expect to see none"; +src/usbip port; +echo "==============================================================" + +echo "Import devices from localhost - should fail with no devices" +src/usbip attach -r localhost -b $busid; +echo "==============================================================" + +echo "bind devices"; +src/usbip bind -b $busid; +echo "==============================================================" + +echo "List imported devices - expect to see exported devices"; +src/usbip list -r localhost; +echo "==============================================================" + +echo "List imported devices - expect to see none"; +src/usbip port; +echo "==============================================================" + +echo "Import devices from localhost - should work" +src/usbip attach -r localhost -b $busid; +echo "==============================================================" + +# Wait for sysfs file to be updated. Without this sleep, usbip port +# shows no imported devices. +sleep 3; + +echo "List imported devices - expect to see imported devices"; +src/usbip port; +echo "==============================================================" + +echo "Import devices from localhost - expect already imported messages" +src/usbip attach -r localhost -b $busid; +echo "==============================================================" + +echo "Un-import devices"; +src/usbip detach -p 00; +src/usbip detach -p 01; +echo "==============================================================" + +echo "List imported devices - expect to see none"; +src/usbip port; +echo "==============================================================" + +echo "Un-import devices - expect no devices to detach messages"; +src/usbip detach -p 00; +src/usbip detach -p 01; +echo "==============================================================" + +echo "Detach invalid port tests - expect invalid port error message"; +src/usbip detach -p 100; +echo "==============================================================" + +echo "Expect to see export-able devices"; +src/usbip list -l; +echo "==============================================================" + +echo "Remove usbip_host module"; +rmmod usbip_host; + +echo "Run lsusb - bound devices should be rebound to original drivers" +lsusb -t; +echo "==============================================================" + +echo "Run bind without usbip_host - expect fail" +src/usbip bind -b $busid; +echo "==============================================================" + +echo "Run lsusb - devices that failed to bind aren't bound to any driver" +lsusb -t; +echo "==============================================================" + +echo "modprobe usbip_host - does it work?" +/sbin/modprobe usbip_host +echo "Should see -busid- is not in match_busid table... skip! dmesg" +echo "==============================================================" +dmesg | grep "is not in match_busid table" +echo "==============================================================" + +echo $test_end_msg |