diff options
Diffstat (limited to 'tools/testing/selftests/net/traceroute.sh')
| -rwxr-xr-x | tools/testing/selftests/net/traceroute.sh | 322 |
1 files changed, 322 insertions, 0 deletions
diff --git a/tools/testing/selftests/net/traceroute.sh b/tools/testing/selftests/net/traceroute.sh new file mode 100755 index 0000000000..de9ca97abc --- /dev/null +++ b/tools/testing/selftests/net/traceroute.sh @@ -0,0 +1,322 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Run traceroute/traceroute6 tests +# + +VERBOSE=0 +PAUSE_ON_FAIL=no + +################################################################################ +# +log_test() +{ + local rc=$1 + local expected=$2 + local msg="$3" + + if [ ${rc} -eq ${expected} ]; then + printf "TEST: %-60s [ OK ]\n" "${msg}" + nsuccess=$((nsuccess+1)) + else + ret=1 + nfail=$((nfail+1)) + printf "TEST: %-60s [FAIL]\n" "${msg}" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + fi +} + +run_cmd() +{ + local ns + local cmd + local out + local rc + + ns="$1" + shift + cmd="$*" + + if [ "$VERBOSE" = "1" ]; then + printf " COMMAND: $cmd\n" + fi + + out=$(eval ip netns exec ${ns} ${cmd} 2>&1) + rc=$? + if [ "$VERBOSE" = "1" -a -n "$out" ]; then + echo " $out" + fi + + [ "$VERBOSE" = "1" ] && echo + + return $rc +} + +################################################################################ +# create namespaces and interconnects + +create_ns() +{ + local ns=$1 + local addr=$2 + local addr6=$3 + + [ -z "${addr}" ] && addr="-" + [ -z "${addr6}" ] && addr6="-" + + ip netns add ${ns} + + ip netns exec ${ns} ip link set lo up + if [ "${addr}" != "-" ]; then + ip netns exec ${ns} ip addr add dev lo ${addr} + fi + if [ "${addr6}" != "-" ]; then + ip netns exec ${ns} ip -6 addr add dev lo ${addr6} + fi + + ip netns exec ${ns} ip ro add unreachable default metric 8192 + ip netns exec ${ns} ip -6 ro add unreachable default metric 8192 + + ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.accept_dad=0 +} + +# create veth pair to connect namespaces and apply addresses. +connect_ns() +{ + local ns1=$1 + local ns1_dev=$2 + local ns1_addr=$3 + local ns1_addr6=$4 + local ns2=$5 + local ns2_dev=$6 + local ns2_addr=$7 + local ns2_addr6=$8 + + ip netns exec ${ns1} ip li add ${ns1_dev} type veth peer name tmp + ip netns exec ${ns1} ip li set ${ns1_dev} up + ip netns exec ${ns1} ip li set tmp netns ${ns2} name ${ns2_dev} + ip netns exec ${ns2} ip li set ${ns2_dev} up + + if [ "${ns1_addr}" != "-" ]; then + ip netns exec ${ns1} ip addr add dev ${ns1_dev} ${ns1_addr} + fi + + if [ "${ns2_addr}" != "-" ]; then + ip netns exec ${ns2} ip addr add dev ${ns2_dev} ${ns2_addr} + fi + + if [ "${ns1_addr6}" != "-" ]; then + ip netns exec ${ns1} ip addr add dev ${ns1_dev} ${ns1_addr6} + fi + + if [ "${ns2_addr6}" != "-" ]; then + ip netns exec ${ns2} ip addr add dev ${ns2_dev} ${ns2_addr6} + fi +} + +################################################################################ +# traceroute6 test +# +# Verify that in this scenario +# +# ------------------------ N2 +# | | +# ------ ------ N3 ---- +# | R1 | | R2 |------|H2| +# ------ ------ ---- +# | | +# ------------------------ N1 +# | +# ---- +# |H1| +# ---- +# +# where H1's default route goes through R1 and R1's default route goes +# through R2 over N2, traceroute6 from H1 to H2 reports R2's address +# on N2 and not N1. +# +# Addresses are assigned as follows: +# +# N1: 2000:101::/64 +# N2: 2000:102::/64 +# N3: 2000:103::/64 +# +# R1's host part of address: 1 +# R2's host part of address: 2 +# H1's host part of address: 3 +# H2's host part of address: 4 +# +# For example: +# the IPv6 address of R1's interface on N2 is 2000:102::1/64 + +cleanup_traceroute6() +{ + local ns + + for ns in host-1 host-2 router-1 router-2 + do + ip netns del ${ns} 2>/dev/null + done +} + +setup_traceroute6() +{ + brdev=br0 + + # start clean + cleanup_traceroute6 + + set -e + create_ns host-1 + create_ns host-2 + create_ns router-1 + create_ns router-2 + + # Setup N3 + connect_ns router-2 eth3 - 2000:103::2/64 host-2 eth3 - 2000:103::4/64 + ip netns exec host-2 ip route add default via 2000:103::2 + + # Setup N2 + connect_ns router-1 eth2 - 2000:102::1/64 router-2 eth2 - 2000:102::2/64 + ip netns exec router-1 ip route add default via 2000:102::2 + + # Setup N1. host-1 and router-2 connect to a bridge in router-1. + ip netns exec router-1 ip link add name ${brdev} type bridge + ip netns exec router-1 ip link set ${brdev} up + ip netns exec router-1 ip addr add 2000:101::1/64 dev ${brdev} + + connect_ns host-1 eth0 - 2000:101::3/64 router-1 eth0 - - + ip netns exec router-1 ip link set dev eth0 master ${brdev} + ip netns exec host-1 ip route add default via 2000:101::1 + + connect_ns router-2 eth1 - 2000:101::2/64 router-1 eth1 - - + ip netns exec router-1 ip link set dev eth1 master ${brdev} + + # Prime the network + ip netns exec host-1 ping6 -c5 2000:103::4 >/dev/null 2>&1 + + set +e +} + +run_traceroute6() +{ + if [ ! -x "$(command -v traceroute6)" ]; then + echo "SKIP: Could not run IPV6 test without traceroute6" + return + fi + + setup_traceroute6 + + # traceroute6 host-2 from host-1 (expects 2000:102::2) + run_cmd host-1 "traceroute6 2000:103::4 | grep -q 2000:102::2" + log_test $? 0 "IPV6 traceroute" + + cleanup_traceroute6 +} + +################################################################################ +# traceroute test +# +# Verify that traceroute from H1 to H2 shows 1.0.1.1 in this scenario +# +# 1.0.3.1/24 +# ---- 1.0.1.3/24 1.0.1.1/24 ---- 1.0.2.1/24 1.0.2.4/24 ---- +# |H1|--------------------------|R1|--------------------------|H2| +# ---- N1 ---- N2 ---- +# +# where net.ipv4.icmp_errors_use_inbound_ifaddr is set on R1 and +# 1.0.3.1/24 and 1.0.1.1/24 are respectively R1's primary and secondary +# address on N1. +# + +cleanup_traceroute() +{ + local ns + + for ns in host-1 host-2 router + do + ip netns del ${ns} 2>/dev/null + done +} + +setup_traceroute() +{ + # start clean + cleanup_traceroute + + set -e + create_ns host-1 + create_ns host-2 + create_ns router + + connect_ns host-1 eth0 1.0.1.3/24 - \ + router eth1 1.0.3.1/24 - + ip netns exec host-1 ip route add default via 1.0.1.1 + + ip netns exec router ip addr add 1.0.1.1/24 dev eth1 + ip netns exec router sysctl -qw \ + net.ipv4.icmp_errors_use_inbound_ifaddr=1 + + connect_ns host-2 eth0 1.0.2.4/24 - \ + router eth2 1.0.2.1/24 - + ip netns exec host-2 ip route add default via 1.0.2.1 + + # Prime the network + ip netns exec host-1 ping -c5 1.0.2.4 >/dev/null 2>&1 + + set +e +} + +run_traceroute() +{ + if [ ! -x "$(command -v traceroute)" ]; then + echo "SKIP: Could not run IPV4 test without traceroute" + return + fi + + setup_traceroute + + # traceroute host-2 from host-1 (expects 1.0.1.1). Takes a while. + run_cmd host-1 "traceroute 1.0.2.4 | grep -q 1.0.1.1" + log_test $? 0 "IPV4 traceroute" + + cleanup_traceroute +} + +################################################################################ +# Run tests + +run_tests() +{ + run_traceroute6 + run_traceroute +} + +################################################################################ +# main + +declare -i nfail=0 +declare -i nsuccess=0 + +while getopts :pv o +do + case $o in + p) PAUSE_ON_FAIL=yes;; + v) VERBOSE=$(($VERBOSE + 1));; + *) exit 1;; + esac +done + +run_tests + +printf "\nTests passed: %3d\n" ${nsuccess} +printf "Tests failed: %3d\n" ${nfail} |