diff options
Diffstat (limited to '')
| -rw-r--r-- | tools/testing/selftests/rseq/rseq-mips.h | 181 |
1 files changed, 181 insertions, 0 deletions
diff --git a/tools/testing/selftests/rseq/rseq-mips.h b/tools/testing/selftests/rseq/rseq-mips.h new file mode 100644 index 0000000000..42ef8e9466 --- /dev/null +++ b/tools/testing/selftests/rseq/rseq-mips.h @@ -0,0 +1,181 @@ +/* SPDX-License-Identifier: LGPL-2.1 OR MIT */ +/* + * Author: Paul Burton <paul.burton@mips.com> + * (C) Copyright 2018 MIPS Tech LLC + * (C) Copyright 2016-2022 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com> + */ + +/* + * RSEQ_SIG uses the break instruction. The instruction pattern is: + * + * On MIPS: + * 0350000d break 0x350 + * + * On nanoMIPS: + * 00100350 break 0x350 + * + * On microMIPS: + * 0000d407 break 0x350 + * + * For nanoMIPS32 and microMIPS, the instruction stream is encoded as 16-bit + * halfwords, so the signature halfwords need to be swapped accordingly for + * little-endian. + */ +#if defined(__nanomips__) +# ifdef __MIPSEL__ +# define RSEQ_SIG 0x03500010 +# else +# define RSEQ_SIG 0x00100350 +# endif +#elif defined(__mips_micromips) +# ifdef __MIPSEL__ +# define RSEQ_SIG 0xd4070000 +# else +# define RSEQ_SIG 0x0000d407 +# endif +#elif defined(__mips__) +# define RSEQ_SIG 0x0350000d +#else +/* Unknown MIPS architecture. */ +#endif + +#define rseq_smp_mb() __asm__ __volatile__ ("sync" ::: "memory") +#define rseq_smp_rmb() rseq_smp_mb() +#define rseq_smp_wmb() rseq_smp_mb() + +#define rseq_smp_load_acquire(p) \ +__extension__ ({ \ + rseq_unqual_scalar_typeof(*(p)) ____p1 = RSEQ_READ_ONCE(*(p)); \ + rseq_smp_mb(); \ + ____p1; \ +}) + +#define rseq_smp_acquire__after_ctrl_dep() rseq_smp_rmb() + +#define rseq_smp_store_release(p, v) \ +do { \ + rseq_smp_mb(); \ + RSEQ_WRITE_ONCE(*(p), v); \ +} while (0) + +#if _MIPS_SZLONG == 64 +# define LONG ".dword" +# define LONG_LA "dla" +# define LONG_L "ld" +# define LONG_S "sd" +# define LONG_ADDI "daddiu" +# define U32_U64_PAD(x) x +#elif _MIPS_SZLONG == 32 +# define LONG ".word" +# define LONG_LA "la" +# define LONG_L "lw" +# define LONG_S "sw" +# define LONG_ADDI "addiu" +# ifdef __BIG_ENDIAN +# define U32_U64_PAD(x) "0x0, " x +# else +# define U32_U64_PAD(x) x ", 0x0" +# endif +#else +# error unsupported _MIPS_SZLONG +#endif + +#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, start_ip, \ + post_commit_offset, abort_ip) \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ + ".balign 32\n\t" \ + __rseq_str(label) ":\n\t" \ + ".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(start_ip)) "\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(post_commit_offset)) "\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(abort_ip)) "\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(label) "b") "\n\t" \ + ".popsection\n\t" + +#define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \ + __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \ + (post_commit_ip - start_ip), abort_ip) + +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(start_ip)) "\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(exit_ip)) "\n\t" \ + ".popsection\n\t" + +#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ + RSEQ_INJECT_ASM(1) \ + LONG_LA " $4, " __rseq_str(cs_label) "\n\t" \ + LONG_S " $4, %[" __rseq_str(rseq_cs) "]\n\t" \ + __rseq_str(label) ":\n\t" + +#define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \ + RSEQ_INJECT_ASM(2) \ + "lw $4, %[" __rseq_str(current_cpu_id) "]\n\t" \ + "bne $4, %[" __rseq_str(cpu_id) "], " __rseq_str(label) "\n\t" + +#define __RSEQ_ASM_DEFINE_ABORT(table_label, label, teardown, \ + abort_label, version, flags, \ + start_ip, post_commit_offset, abort_ip) \ + ".balign 32\n\t" \ + __rseq_str(table_label) ":\n\t" \ + ".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(start_ip)) "\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(post_commit_offset)) "\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(abort_ip)) "\n\t" \ + ".word " __rseq_str(RSEQ_SIG) "\n\t" \ + __rseq_str(label) ":\n\t" \ + teardown \ + "b %l[" __rseq_str(abort_label) "]\n\t" + +#define RSEQ_ASM_DEFINE_ABORT(table_label, label, teardown, abort_label, \ + start_ip, post_commit_ip, abort_ip) \ + __RSEQ_ASM_DEFINE_ABORT(table_label, label, teardown, \ + abort_label, 0x0, 0x0, start_ip, \ + (post_commit_ip - start_ip), abort_ip) + +#define RSEQ_ASM_DEFINE_CMPFAIL(label, teardown, cmpfail_label) \ + __rseq_str(label) ":\n\t" \ + teardown \ + "b %l[" __rseq_str(cmpfail_label) "]\n\t" + +/* Per-cpu-id indexing. */ + +#define RSEQ_TEMPLATE_CPU_ID +#define RSEQ_TEMPLATE_MO_RELAXED +#include "rseq-mips-bits.h" +#undef RSEQ_TEMPLATE_MO_RELAXED + +#define RSEQ_TEMPLATE_MO_RELEASE +#include "rseq-mips-bits.h" +#undef RSEQ_TEMPLATE_MO_RELEASE +#undef RSEQ_TEMPLATE_CPU_ID + +/* Per-mm-cid indexing. */ + +#define RSEQ_TEMPLATE_MM_CID +#define RSEQ_TEMPLATE_MO_RELAXED +#include "rseq-mips-bits.h" +#undef RSEQ_TEMPLATE_MO_RELAXED + +#define RSEQ_TEMPLATE_MO_RELEASE +#include "rseq-mips-bits.h" +#undef RSEQ_TEMPLATE_MO_RELEASE +#undef RSEQ_TEMPLATE_MM_CID + +/* APIs which are not based on cpu ids. */ + +#define RSEQ_TEMPLATE_CPU_ID_NONE +#define RSEQ_TEMPLATE_MO_RELAXED +#include "rseq-mips-bits.h" +#undef RSEQ_TEMPLATE_MO_RELAXED +#undef RSEQ_TEMPLATE_CPU_ID_NONE |