From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- .../ABI/stable/sysfs-driver-firmware-zynqmp | 256 +++++++++++++++++++++ 1 file changed, 256 insertions(+) create mode 100644 Documentation/ABI/stable/sysfs-driver-firmware-zynqmp (limited to 'Documentation/ABI/stable/sysfs-driver-firmware-zynqmp') diff --git a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp new file mode 100644 index 0000000000..c3fec3c835 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp @@ -0,0 +1,256 @@ +What: /sys/devices/platform/firmware\:zynqmp-firmware/ggs* +Date: March 2020 +KernelVersion: 5.6 +Contact: "Jolly Shah" +Description: + Read/Write PMU global general storage register value, + GLOBAL_GEN_STORAGE{0:3}. + Global general storage register that can be used + by system to pass information between masters. + + The register is reset during system or power-on + resets. Three registers are used by the FSBL and + other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}. + + Usage:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + # echo > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + + Example:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + +Users: Xilinx + +What: /sys/devices/platform/firmware\:zynqmp-firmware/pggs* +Date: March 2020 +KernelVersion: 5.6 +Contact: "Jolly Shah" +Description: + Read/Write PMU persistent global general storage register + value, PERS_GLOB_GEN_STORAGE{0:3}. + Persistent global general storage register that + can be used by system to pass information between + masters. + + This register is only reset by the power-on reset + and maintains its value through a system reset. + Four registers are used by the FSBL and other Xilinx + software products: PERS_GLOB_GEN_STORAGE{4:7}. + Register is reset only by a POR reset. + + Usage:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + # echo > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + + Example:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + +Users: Xilinx + +What: /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope +Date: March 2020 +KernelVersion: 5.6 +Contact: "Jolly Shah" +Description: + This sysfs interface allows to set the shutdown scope for the + next shutdown request. When the next shutdown is performed, the + platform specific portion of PSCI-system_off can use the chosen + shutdown scope. + + Following are available shutdown scopes(subtypes): + + subsystem: + Only the APU along with all of its peripherals + not used by other processing units will be + shut down. This may result in the FPD power + domain being shut down provided that no other + processing unit uses FPD peripherals or DRAM. + ps_only: + The complete PS will be shut down, including the + RPU, PMU, etc. Only the PL domain (FPGA) + remains untouched. + system: + The complete system/device is shut down. + + Usage:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + # echo > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + + Example:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + +Users: Xilinx + +What: /sys/devices/platform/firmware\:zynqmp-firmware/health_status +Date: March 2020 +KernelVersion: 5.6 +Contact: "Jolly Shah" +Description: + This sysfs interface allows to set the health status. If PMUFW + is compiled with CHECK_HEALTHY_BOOT, it will check the healthy + bit on FPD WDT expiration. If healthy bit is set by a user + application running in Linux, PMUFW will do APU only restart. If + healthy bit is not set during FPD WDT expiration, PMUFW will do + system restart. + + Usage: + + Set healthy bit:: + + # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status + + Unset healthy bit:: + + # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status + +Users: Xilinx + +What: /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id +Date: Feb 2022 +KernelVersion: 5.18 +Contact: "Ronak Jain" +Description: + This sysfs interface allows user to configure features at + runtime. The user can enable or disable features running at + firmware as well as the user can configure the parameters of + the features at runtime. The supported features are over + temperature and external watchdog. Here, the external watchdog + is completely different than the /dev/watchdog as the external + watchdog is running on the firmware and it is used to monitor + the health of firmware not APU(Linux). Also, the external + watchdog is interfaced outside of the zynqmp soc. + + The supported config ids are for the feature configuration is, + 1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or + disable the over temperature feature. + 2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the + over temperature limit in Degree Celsius. + 3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable + the external watchdog feature. + 4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the + external watchdog feature. + + Usage: + + Select over temperature config ID to enable/disable feature + # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + + Check over temperature config ID is selected or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + The expected result is 1. + + Select over temperature config ID to configure OT limit + # echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + + Check over temperature config ID is selected or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + The expected result is 2. + + Select external watchdog config ID to enable/disable feature + # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + + Check external watchdog config ID is selected or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + The expected result is 3. + + Select external watchdog config ID to configure time interval + # echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + + Check external watchdog config ID is selected or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + The expected result is 4. + +Users: Xilinx + +What: /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value +Date: Feb 2022 +KernelVersion: 5.18 +Contact: "Ronak Jain" +Description: + This sysfs interface allows to configure features at runtime. + The user can enable or disable features running at firmware. + Also, the user can configure the parameters of the features + at runtime. The supported features are over temperature and + external watchdog. Here, the external watchdog is completely + different than the /dev/watchdog as the external watchdog is + running on the firmware and it is used to monitor the health + of firmware not APU(Linux). Also, the external watchdog is + interfaced outside of the zynqmp soc. + + By default the features are disabled in the firmware. The user + can enable features by querying appropriate config id of the + features. + + The default limit for the over temperature is 90 Degree Celsius. + The default timer interval for the external watchdog is 570ms. + + The supported config ids are for the feature configuration is, + 1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or + disable the over temperature feature. + 2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the + over temperature limit in Degree Celsius. + 3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable + the external watchdog feature. + 4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the + external watchdog feature. + + Usage: + + Enable over temperature feature + # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + + Check whether the over temperature feature is enabled or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + The expected result is 1. + + Disable over temperature feature + # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + + Check whether the over temperature feature is disabled or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + The expected result is 0. + + Configure over temperature limit to 50 Degree Celsius + # echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + # echo 50 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + + Check whether the over temperature limit is configured or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + The expected result is 50. + + Enable external watchdog feature + # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + + Check whether the external watchdog feature is enabled or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + The expected result is 1. + + Disable external watchdog feature + # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + + Check whether the external watchdog feature is disabled or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + The expected result is 0. + + Configure external watchdog timer interval to 500ms + # echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + # echo 500 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + + Check whether the external watchdog timer interval is configured or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + The expected result is 500. + +Users: Xilinx -- cgit v1.2.3