From 50ba0232fd5312410f1b65247e774244f89a628e Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 18 May 2024 20:50:36 +0200 Subject: Merging upstream version 6.8.9. Signed-off-by: Daniel Baumann --- .../ABI/testing/debugfs-driver-qat_telemetry | 228 +++++++++++++++++++++ 1 file changed, 228 insertions(+) create mode 100644 Documentation/ABI/testing/debugfs-driver-qat_telemetry (limited to 'Documentation/ABI/testing/debugfs-driver-qat_telemetry') diff --git a/Documentation/ABI/testing/debugfs-driver-qat_telemetry b/Documentation/ABI/testing/debugfs-driver-qat_telemetry new file mode 100644 index 0000000000..eacee20720 --- /dev/null +++ b/Documentation/ABI/testing/debugfs-driver-qat_telemetry @@ -0,0 +1,228 @@ +What: /sys/kernel/debug/qat__/telemetry/control +Date: March 2024 +KernelVersion: 6.8 +Contact: qat-linux@intel.com +Description: (RW) Enables/disables the reporting of telemetry metrics. + + Allowed values to write: + ======================== + * 0: disable telemetry + * 1: enable telemetry + * 2, 3, 4: enable telemetry and calculate minimum, maximum + and average for each counter over 2, 3 or 4 samples + + Returned values: + ================ + * 1-4: telemetry is enabled and running + * 0: telemetry is disabled + + Example. + + Writing '3' to this file starts the collection of + telemetry metrics. Samples are collected every second and + stored in a circular buffer of size 3. These values are then + used to calculate the minimum, maximum and average for each + counter. After enabling, counters can be retrieved through + the ``device_data`` file:: + + echo 3 > /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/control + + Writing '0' to this file stops the collection of telemetry + metrics:: + + echo 0 > /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/control + + This attribute is only available for qat_4xxx devices. + +What: /sys/kernel/debug/qat__/telemetry/device_data +Date: March 2024 +KernelVersion: 6.8 +Contact: qat-linux@intel.com +Description: (RO) Reports device telemetry counters. + Reads report metrics about performance and utilization of + a QAT device: + + ======================= ======================================== + Field Description + ======================= ======================================== + sample_cnt number of acquisitions of telemetry data + from the device. Reads are performed + every 1000 ms. + pci_trans_cnt number of PCIe partial transactions + max_rd_lat maximum logged read latency [ns] (could + be any read operation) + rd_lat_acc_avg average read latency [ns] + max_gp_lat max get to put latency [ns] (only takes + samples for AE0) + gp_lat_acc_avg average get to put latency [ns] + bw_in PCIe, write bandwidth [Mbps] + bw_out PCIe, read bandwidth [Mbps] + at_page_req_lat_avg Address Translator(AT), average page + request latency [ns] + at_trans_lat_avg AT, average page translation latency [ns] + at_max_tlb_used AT, maximum uTLB used + util_cpr utilization of Compression slice N [%] + exec_cpr execution count of Compression slice N + util_xlt utilization of Translator slice N [%] + exec_xlt execution count of Translator slice N + util_dcpr utilization of Decompression slice N [%] + exec_dcpr execution count of Decompression slice N + util_pke utilization of PKE N [%] + exec_pke execution count of PKE N + util_ucs utilization of UCS slice N [%] + exec_ucs execution count of UCS slice N + util_wat utilization of Wireless Authentication + slice N [%] + exec_wat execution count of Wireless Authentication + slice N + util_wcp utilization of Wireless Cipher slice N [%] + exec_wcp execution count of Wireless Cipher slice N + util_cph utilization of Cipher slice N [%] + exec_cph execution count of Cipher slice N + util_ath utilization of Authentication slice N [%] + exec_ath execution count of Authentication slice N + ======================= ======================================== + + The telemetry report file can be read with the following command:: + + cat /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/device_data + + If ``control`` is set to 1, only the current values of the + counters are displayed:: + + + + If ``control`` is 2, 3 or 4, counters are displayed in the + following format:: + + + + If a device lacks of a specific accelerator, the corresponding + attribute is not reported. + + This attribute is only available for qat_4xxx devices. + +What: /sys/kernel/debug/qat__/telemetry/rp__data +Date: March 2024 +KernelVersion: 6.8 +Contact: qat-linux@intel.com +Description: (RW) Selects up to 4 Ring Pairs (RP) to monitor, one per file, + and report telemetry counters related to each. + + Allowed values to write: + ======================== + * 0 to ````: + Ring pair to be monitored. The value of ``num_rps`` can be + retrieved through ``/sys/bus/pci/devices//qat/num_rps``. + See Documentation/ABI/testing/sysfs-driver-qat. + + Reads report metrics about performance and utilization of + the selected RP: + + ======================= ======================================== + Field Description + ======================= ======================================== + sample_cnt number of acquisitions of telemetry data + from the device. Reads are performed + every 1000 ms + rp_num RP number associated with slot + service_type service associated to the RP + pci_trans_cnt number of PCIe partial transactions + gp_lat_acc_avg average get to put latency [ns] + bw_in PCIe, write bandwidth [Mbps] + bw_out PCIe, read bandwidth [Mbps] + at_glob_devtlb_hit Message descriptor DevTLB hit rate + at_glob_devtlb_miss Message descriptor DevTLB miss rate + tl_at_payld_devtlb_hit Payload DevTLB hit rate + tl_at_payld_devtlb_miss Payload DevTLB miss rate + ======================= ======================================== + + Example. + + Writing the value '32' to the file ``rp_C_data`` starts the + collection of telemetry metrics for ring pair 32:: + + echo 32 > /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/rp_C_data + + Once a ring pair is selected, statistics can be read accessing + the file:: + + cat /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/rp_C_data + + If ``control`` is set to 1, only the current values of the + counters are displayed:: + + + + If ``control`` is 2, 3 or 4, counters are displayed in the + following format:: + + + + + On QAT GEN4 devices there are 64 RPs on a PF, so the allowed + values are 0..63. This number is absolute to the device. + If Virtual Functions (VF) are used, the ring pair number can + be derived from the Bus, Device, Function of the VF: + + ============ ====== ====== ====== ====== + PCI BDF/VF RP0 RP1 RP2 RP3 + ============ ====== ====== ====== ====== + 0000:6b:0.1 RP 0 RP 1 RP 2 RP 3 + 0000:6b:0.2 RP 4 RP 5 RP 6 RP 7 + 0000:6b:0.3 RP 8 RP 9 RP 10 RP 11 + 0000:6b:0.4 RP 12 RP 13 RP 14 RP 15 + 0000:6b:0.5 RP 16 RP 17 RP 18 RP 19 + 0000:6b:0.6 RP 20 RP 21 RP 22 RP 23 + 0000:6b:0.7 RP 24 RP 25 RP 26 RP 27 + 0000:6b:1.0 RP 28 RP 29 RP 30 RP 31 + 0000:6b:1.1 RP 32 RP 33 RP 34 RP 35 + 0000:6b:1.2 RP 36 RP 37 RP 38 RP 39 + 0000:6b:1.3 RP 40 RP 41 RP 42 RP 43 + 0000:6b:1.4 RP 44 RP 45 RP 46 RP 47 + 0000:6b:1.5 RP 48 RP 49 RP 50 RP 51 + 0000:6b:1.6 RP 52 RP 53 RP 54 RP 55 + 0000:6b:1.7 RP 56 RP 57 RP 58 RP 59 + 0000:6b:2.0 RP 60 RP 61 RP 62 RP 63 + ============ ====== ====== ====== ====== + + The mapping is only valid for the BDFs of VFs on the host. + + + The service provided on a ring-pair varies depending on the + configuration. The configuration for a given device can be + queried and set using ``cfg_services``. + See Documentation/ABI/testing/sysfs-driver-qat for details. + + The following table reports how ring pairs are mapped to VFs + on the PF 0000:6b:0.0 configured for `sym;asym` or `asym;sym`: + + =========== ============ =========== ============ =========== + PCI BDF/VF RP0/service RP1/service RP2/service RP3/service + =========== ============ =========== ============ =========== + 0000:6b:0.1 RP 0 asym RP 1 sym RP 2 asym RP 3 sym + 0000:6b:0.2 RP 4 asym RP 5 sym RP 6 asym RP 7 sym + 0000:6b:0.3 RP 8 asym RP 9 sym RP10 asym RP11 sym + ... ... ... ... ... + =========== ============ =========== ============ =========== + + All VFs follow the same pattern. + + + The following table reports how ring pairs are mapped to VFs on + the PF 0000:6b:0.0 configured for `dc`: + + =========== ============ =========== ============ =========== + PCI BDF/VF RP0/service RP1/service RP2/service RP3/service + =========== ============ =========== ============ =========== + 0000:6b:0.1 RP 0 dc RP 1 dc RP 2 dc RP 3 dc + 0000:6b:0.2 RP 4 dc RP 5 dc RP 6 dc RP 7 dc + 0000:6b:0.3 RP 8 dc RP 9 dc RP10 dc RP11 dc + ... ... ... ... ... + =========== ============ =========== ============ =========== + + The mapping of a RP to a service can be retrieved using + ``rp2srv`` from sysfs. + See Documentation/ABI/testing/sysfs-driver-qat for details. + + This attribute is only available for qat_4xxx devices. -- cgit v1.2.3