From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- .../testing/sysfs-bus-event_source-devices-hv_gpci | 242 +++++++++++++++++++++ 1 file changed, 242 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci (limited to 'Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci') diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci new file mode 100644 index 0000000000..40f7cd2405 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci @@ -0,0 +1,242 @@ +What: /sys/bus/event_source/devices/hv_gpci/format +Date: September 2020 +Contact: Linux on PowerPC Developer List +Description: Read-only. Attribute group to describe the magic bits + that go into perf_event_attr.config for a particular pmu. + (See ABI/testing/sysfs-bus-event_source-devices-format). + + Each attribute under this group defines a bit range of the + perf_event_attr.config. All supported attributes are listed + below:: + + counter_info_version = "config:16-23" + length = "config:24-31" + partition_id = "config:32-63" + request = "config:0-31" + sibling_part_id = "config:32-63" + hw_chip_id = "config:32-63" + offset = "config:32-63" + phys_processor_idx = "config:32-63" + secondary_index = "config:0-15" + starting_index = "config:32-63" + + For example:: + + processor_core_utilization_instructions_completed = "request=0x94, + phys_processor_idx=?,counter_info_version=0x8, + length=8,offset=0x18" + + In this event, '?' after phys_processor_idx specifies this value + this value will be provided by user while running this event. + +What: /sys/bus/event_source/devices/hv_gpci/interface/collect_privileged +Date: February 2014 +Contact: Linux on PowerPC Developer List +Description: + '0' if the hypervisor is configured to forbid access to event + counters being accumulated by other guests and to physical + domain event counters. + + '1' if that access is allowed. + +What: /sys/bus/event_source/devices/hv_gpci/interface/ga +Date: February 2014 +Contact: Linux on PowerPC Developer List +Description: + 0 or 1. Indicates whether we have access to "GA" events (listed + in arch/powerpc/perf/hv-gpci.h). + +What: /sys/bus/event_source/devices/hv_gpci/interface/expanded +Date: February 2014 +Contact: Linux on PowerPC Developer List +Description: + 0 or 1. Indicates whether we have access to "EXPANDED" events (listed + in arch/powerpc/perf/hv-gpci.h). + +What: /sys/bus/event_source/devices/hv_gpci/interface/lab +Date: February 2014 +Contact: Linux on PowerPC Developer List +Description: + 0 or 1. Indicates whether we have access to "LAB" events (listed + in arch/powerpc/perf/hv-gpci.h). + +What: /sys/bus/event_source/devices/hv_gpci/interface/version +Date: February 2014 +Contact: Linux on PowerPC Developer List +Description: + A number indicating the version of the gpci interface that the + hypervisor reports supporting. + +What: /sys/bus/event_source/devices/hv_gpci/interface/kernel_version +Date: February 2014 +Contact: Linux on PowerPC Developer List +Description: + A number indicating the latest version of the gpci interface + that the kernel is aware of. + +What: /sys/devices/hv_gpci/cpumask +Date: October 2020 +Contact: Linux on PowerPC Developer List +Description: read only + This sysfs file exposes the cpumask which is designated to make + HCALLs to retrieve hv-gpci pmu event counter data. + +What: /sys/devices/hv_gpci/interface/processor_bus_topology +Date: July 2023 +Contact: Linux on PowerPC Developer List +Description: admin read only + This sysfs file exposes the system topology information by making HCALL + H_GET_PERF_COUNTER_INFO. The HCALL is made with counter request value + PROCESSOR_BUS_TOPOLOGY(0xD0). + + * This sysfs file will be created only for power10 and above platforms. + + * User needs root privileges to read data from this sysfs file. + + * This sysfs file will be created, only when the HCALL returns "H_SUCCESS", + "H_AUTHORITY" or "H_PARAMETER" as the return type. + + HCALL with return error type "H_AUTHORITY" can be resolved during + runtime by setting "Enable Performance Information Collection" option. + + * The end user reading this sysfs file must decode the content as per + underlying platform/firmware. + + Possible error codes while reading this sysfs file: + + * "-EPERM" : Partition is not permitted to retrieve performance information, + required to set "Enable Performance Information Collection" option. + + * "-EIO" : Can't retrieve system information because of invalid buffer length/invalid address + or because of some hardware error. Refer to getPerfCountInfo documentation for + more information. + + * "-EFBIG" : System information exceeds PAGE_SIZE. + +What: /sys/devices/hv_gpci/interface/processor_config +Date: July 2023 +Contact: Linux on PowerPC Developer List +Description: admin read only + This sysfs file exposes the system topology information by making HCALL + H_GET_PERF_COUNTER_INFO. The HCALL is made with counter request value + PROCESSOR_CONFIG(0x90). + + * This sysfs file will be created only for power10 and above platforms. + + * User needs root privileges to read data from this sysfs file. + + * This sysfs file will be created, only when the HCALL returns "H_SUCCESS", + "H_AUTHORITY" or "H_PARAMETER" as the return type. + + HCALL with return error type "H_AUTHORITY" can be resolved during + runtime by setting "Enable Performance Information Collection" option. + + * The end user reading this sysfs file must decode the content as per + underlying platform/firmware. + + Possible error codes while reading this sysfs file: + + * "-EPERM" : Partition is not permitted to retrieve performance information, + required to set "Enable Performance Information Collection" option. + + * "-EIO" : Can't retrieve system information because of invalid buffer length/invalid address + or because of some hardware error. Refer to getPerfCountInfo documentation for + more information. + + * "-EFBIG" : System information exceeds PAGE_SIZE. + +What: /sys/devices/hv_gpci/interface/affinity_domain_via_virtual_processor +Date: July 2023 +Contact: Linux on PowerPC Developer List +Description: admin read only + This sysfs file exposes the system topology information by making HCALL + H_GET_PERF_COUNTER_INFO. The HCALL is made with counter request value + AFFINITY_DOMAIN_INFORMATION_BY_VIRTUAL_PROCESSOR(0xA0). + + * This sysfs file will be created only for power10 and above platforms. + + * User needs root privileges to read data from this sysfs file. + + * This sysfs file will be created, only when the HCALL returns "H_SUCCESS", + "H_AUTHORITY" or "H_PARAMETER" as the return type. + + HCALL with return error type "H_AUTHORITY" can be resolved during + runtime by setting "Enable Performance Information Collection" option. + + * The end user reading this sysfs file must decode the content as per + underlying platform/firmware. + + Possible error codes while reading this sysfs file: + + * "-EPERM" : Partition is not permitted to retrieve performance information, + required to set "Enable Performance Information Collection" option. + + * "-EIO" : Can't retrieve system information because of invalid buffer length/invalid address + or because of some hardware error. Refer to getPerfCountInfo documentation for + more information. + + * "-EFBIG" : System information exceeds PAGE_SIZE. + +What: /sys/devices/hv_gpci/interface/affinity_domain_via_domain +Date: July 2023 +Contact: Linux on PowerPC Developer List +Description: admin read only + This sysfs file exposes the system topology information by making HCALL + H_GET_PERF_COUNTER_INFO. The HCALL is made with counter request value + AFFINITY_DOMAIN_INFORMATION_BY_DOMAIN(0xB0). + + * This sysfs file will be created only for power10 and above platforms. + + * User needs root privileges to read data from this sysfs file. + + * This sysfs file will be created, only when the HCALL returns "H_SUCCESS", + "H_AUTHORITY" or "H_PARAMETER" as the return type. + + HCALL with return error type "H_AUTHORITY" can be resolved during + runtime by setting "Enable Performance Information Collection" option. + + * The end user reading this sysfs file must decode the content as per + underlying platform/firmware. + + Possible error codes while reading this sysfs file: + + * "-EPERM" : Partition is not permitted to retrieve performance information, + required to set "Enable Performance Information Collection" option. + + * "-EIO" : Can't retrieve system information because of invalid buffer length/invalid address + or because of some hardware error. Refer to getPerfCountInfo documentation for + more information. + + * "-EFBIG" : System information exceeds PAGE_SIZE. + +What: /sys/devices/hv_gpci/interface/affinity_domain_via_partition +Date: July 2023 +Contact: Linux on PowerPC Developer List +Description: admin read only + This sysfs file exposes the system topology information by making HCALL + H_GET_PERF_COUNTER_INFO. The HCALL is made with counter request value + AFFINITY_DOMAIN_INFORMATION_BY_PARTITION(0xB1). + + * This sysfs file will be created only for power10 and above platforms. + + * User needs root privileges to read data from this sysfs file. + + * This sysfs file will be created, only when the HCALL returns "H_SUCCESS", + "H_AUTHORITY" or "H_PARAMETER" as the return type. + + HCALL with return error type "H_AUTHORITY" can be resolved during + runtime by setting "Enable Performance Information Collection" option. + + * The end user reading this sysfs file must decode the content as per + underlying platform/firmware. + + Possible error codes while reading this sysfs file: + + * "-EPERM" : Partition is not permitted to retrieve performance information, + required to set "Enable Performance Information Collection" option. + + * "-EIO" : Can't retrieve system information because of invalid buffer length/invalid address + or because of some hardware error. Refer to getPerfCountInfo documentation for + more information. + + * "-EFBIG" : System information exceeds PAGE_SIZE. -- cgit v1.2.3