From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- Documentation/ABI/testing/sysfs-bus-thunderbolt | 370 ++++++++++++++++++++++++ 1 file changed, 370 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-thunderbolt (limited to 'Documentation/ABI/testing/sysfs-bus-thunderbolt') diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt new file mode 100644 index 0000000000..221b6c75ed --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -0,0 +1,370 @@ +What: /sys/bus/thunderbolt/devices/.../domainX/boot_acl +Date: Jun 2018 +KernelVersion: 4.17 +Contact: Mika Westerberg +Description: Holds a comma separated list of device unique_ids that + are allowed to be connected automatically during system + startup (e.g boot devices). The list always contains + maximum supported number of unique_ids where unused + entries are empty. This allows the userspace software + to determine how many entries the controller supports. + If there are multiple controllers, each controller has + its own ACL list and size may be different between the + controllers. + + System BIOS may have an option "Preboot ACL" or similar + that needs to be selected before this list is taken into + consideration. + + Software always updates a full list in each write. + + If a device is authorized automatically during boot its + boot attribute is set to 1. + +What: /sys/bus/thunderbolt/devices/.../domainX/deauthorization +Date: May 2021 +KernelVersion: 5.12 +Contact: Mika Westerberg +Description: This attribute tells whether the system supports + de-authorization of devices. Value of 1 means user can + de-authorize PCIe tunnel by writing 0 to authorized + attribute under each device. + +What: /sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection +Date: Mar 2019 +KernelVersion: 4.21 +Contact: Mika Westerberg +Description: This attribute tells whether the system uses IOMMU + for DMA protection. Value of 1 means IOMMU is used 0 means + it is not (DMA protection is solely based on Thunderbolt + security levels). + +What: /sys/bus/thunderbolt/devices/.../domainX/security +Date: Sep 2017 +KernelVersion: 4.13 +Contact: Mika Westerberg +Description: This attribute holds current Thunderbolt security level + set by the system BIOS. Possible values are: + + ======= ================================================== + none All devices are automatically authorized + user Devices are only authorized based on writing + appropriate value to the authorized attribute + secure Require devices that support secure connect at + minimum. User needs to authorize each device. + dponly Automatically tunnel Display port (and USB). No + PCIe tunnels are created. + usbonly Automatically tunnel USB controller of the + connected Thunderbolt dock (and Display Port). All + PCIe links downstream of the dock are removed. + nopcie USB4 system where PCIe tunneling is disabled from + the BIOS. + ======= ================================================== + +What: /sys/bus/thunderbolt/devices/.../authorized +Date: Sep 2017 +KernelVersion: 4.13 +Contact: Mika Westerberg +Description: This attribute is used to authorize Thunderbolt devices + after they have been connected. If the device is not + authorized, no PCIe devices are available to the system. + + Contents of this attribute will be 0 when the device is not + yet authorized. + + Possible values are supported: + + == =================================================== + 0 The device will be de-authorized (only supported if + deauthorization attribute under domain contains 1) + 1 The device will be authorized and connected + == =================================================== + + When key attribute contains 32 byte hex string the possible + values are: + + == ======================================================== + 0 The device will be de-authorized (only supported if + deauthorization attribute under domain contains 1) + 1 The 32 byte hex string is added to the device NVM and + the device is authorized. + 2 Send a challenge based on the 32 byte hex string. If the + challenge response from device is valid, the device is + authorized. In case of failure errno will be ENOKEY if + the device did not contain a key at all, and + EKEYREJECTED if the challenge response did not match. + == ======================================================== + +What: /sys/bus/thunderbolt/devices/.../boot +Date: Jun 2018 +KernelVersion: 4.17 +Contact: Mika Westerberg +Description: This attribute contains 1 if Thunderbolt device was already + authorized on boot and 0 otherwise. + +What: /sys/bus/thunderbolt/devices/.../generation +Date: Jan 2020 +KernelVersion: 5.5 +Contact: Christian Kellner +Description: This attribute contains the generation of the Thunderbolt + controller associated with the device. It will contain 4 + for USB4. + +What: /sys/bus/thunderbolt/devices/.../key +Date: Sep 2017 +KernelVersion: 4.13 +Contact: Mika Westerberg +Description: When a devices supports Thunderbolt secure connect it will + have this attribute. Writing 32 byte hex string changes + authorization to use the secure connection method instead. + Writing an empty string clears the key and regular connection + method can be used again. + +What: /sys/bus/thunderbolt/devices/.../device +Date: Sep 2017 +KernelVersion: 4.13 +Contact: Mika Westerberg +Description: This attribute contains id of this device extracted from + the device DROM. + +What: /sys/bus/thunderbolt/devices/.../device_name +Date: Sep 2017 +KernelVersion: 4.13 +Contact: Mika Westerberg +Description: This attribute contains name of this device extracted from + the device DROM. + +What: /sys/bus/thunderbolt/devices/.../maxhopid +Date: Jul 2021 +KernelVersion: 5.13 +Contact: Mika Westerberg +Description: Only set for XDomains. The maximum HopID the other host + supports as its input HopID. + +What: /sys/bus/thunderbolt/devices/.../rx_speed +Date: Jan 2020 +KernelVersion: 5.5 +Contact: Mika Westerberg +Description: This attribute reports the device RX speed per lane. + All RX lanes run at the same speed. + +What: /sys/bus/thunderbolt/devices/.../rx_lanes +Date: Jan 2020 +KernelVersion: 5.5 +Contact: Mika Westerberg +Description: This attribute reports number of RX lanes the device is + using simultaneously through its upstream port. + +What: /sys/bus/thunderbolt/devices/.../tx_speed +Date: Jan 2020 +KernelVersion: 5.5 +Contact: Mika Westerberg +Description: This attribute reports the TX speed per lane. + All TX lanes run at the same speed. + +What: /sys/bus/thunderbolt/devices/.../tx_lanes +Date: Jan 2020 +KernelVersion: 5.5 +Contact: Mika Westerberg +Description: This attribute reports number of TX lanes the device is + using simultaneously through its upstream port. + +What: /sys/bus/thunderbolt/devices/.../vendor +Date: Sep 2017 +KernelVersion: 4.13 +Contact: Mika Westerberg +Description: This attribute contains vendor id of this device extracted + from the device DROM. + +What: /sys/bus/thunderbolt/devices/.../vendor_name +Date: Sep 2017 +KernelVersion: 4.13 +Contact: Mika Westerberg +Description: This attribute contains vendor name of this device extracted + from the device DROM. + +What: /sys/bus/thunderbolt/devices/.../unique_id +Date: Sep 2017 +KernelVersion: 4.13 +Contact: Mika Westerberg +Description: This attribute contains unique_id string of this device. + This is either read from hardware registers (UUID on + newer hardware) or based on UID from the device DROM. + Can be used to uniquely identify particular device. + +What: /sys/bus/thunderbolt/devices/.../nvm_version +Date: Sep 2017 +KernelVersion: 4.13 +Contact: Mika Westerberg +Description: If the device has upgradeable firmware the version + number is available here. Format: %x.%x, major.minor. + If the device is in safe mode reading the file returns + -ENODATA instead as the NVM version is not available. + +What: /sys/bus/thunderbolt/devices/.../nvm_authenticate +Date: Sep 2017 +KernelVersion: 4.13 +Contact: Mika Westerberg +Description: When new NVM image is written to the non-active NVM + area (through non_activeX NVMem device), the + authentication procedure is started by writing to + this file. + If everything goes well, the device is + restarted with the new NVM firmware. If the image + verification fails an error code is returned instead. + + This file will accept writing values "1", "2" or "3". + + - Writing "1" will flush the image to the storage + area and authenticate the image in one action. + - Writing "2" will run some basic validation on the image + and flush it to the storage area. + - Writing "3" will authenticate the image that is + currently written in the storage area. This is only + supported with USB4 devices and retimers. + + When read holds status of the last authentication + operation if an error occurred during the process. This + is directly the status value from the DMA configuration + based mailbox before the device is power cycled. Writing + 0 here clears the status. + +What: /sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect +Date: Oct 2020 +KernelVersion: v5.9 +Contact: Mario Limonciello +Description: For supported devices, automatically authenticate the new Thunderbolt + image when the device is disconnected from the host system. + + This file will accept writing values "1" or "2" + + - Writing "1" will flush the image to the storage + area and prepare the device for authentication on disconnect. + - Writing "2" will run some basic validation on the image + and flush it to the storage area. + +What: /sys/bus/thunderbolt/devices/./key +Date: Jan 2018 +KernelVersion: 4.15 +Contact: Mika Westerberg +Description: This contains name of the property directory the XDomain + service exposes. This entry describes the protocol in + question. Following directories are already reserved by + the Apple XDomain specification: + + ======== =============================================== + network IP/ethernet over Thunderbolt + targetdm Target disk mode protocol over Thunderbolt + extdisp External display mode protocol over Thunderbolt + ======== =============================================== + +What: /sys/bus/thunderbolt/devices/./modalias +Date: Jan 2018 +KernelVersion: 4.15 +Contact: Mika Westerberg +Description: Stores the same MODALIAS value emitted by uevent for + the XDomain service. Format: tbtsvc:kSpNvNrN + +What: /sys/bus/thunderbolt/devices/./prtcid +Date: Jan 2018 +KernelVersion: 4.15 +Contact: Mika Westerberg +Description: This contains XDomain protocol identifier the XDomain + service supports. + +What: /sys/bus/thunderbolt/devices/./prtcvers +Date: Jan 2018 +KernelVersion: 4.15 +Contact: Mika Westerberg +Description: This contains XDomain protocol version the XDomain + service supports. + +What: /sys/bus/thunderbolt/devices/./prtcrevs +Date: Jan 2018 +KernelVersion: 4.15 +Contact: Mika Westerberg +Description: This contains XDomain software version the XDomain + service supports. + +What: /sys/bus/thunderbolt/devices/./prtcstns +Date: Jan 2018 +KernelVersion: 4.15 +Contact: Mika Westerberg +Description: This contains XDomain service specific settings as + bitmask. Format: %x + +What: /sys/bus/thunderbolt/devices/usb4_portX/connector +Date: April 2022 +Contact: Heikki Krogerus +Description: + Symlink to the USB Type-C connector. This link is only + created when USB Type-C Connector Class is enabled, + and only if the system firmware is capable of + describing the connection between a port and its + connector. + +What: /sys/bus/thunderbolt/devices/usb4_portX/link +Date: Sep 2021 +KernelVersion: v5.14 +Contact: Mika Westerberg +Description: Returns the current link mode. Possible values are + "usb4", "tbt" and "none". + +What: /sys/bus/thunderbolt/devices/usb4_portX/offline +Date: Sep 2021 +KernelVersion: v5.14 +Contact: Rajmohan Mani +Description: Writing 1 to this attribute puts the USB4 port into + offline mode. Only allowed when there is nothing + connected to the port (link attribute returns "none"). + Once the port is in offline mode it does not receive any + hotplug events. This is used to update NVM firmware of + on-board retimers. Writing 0 puts the port back to + online mode. + + This attribute is only visible if the platform supports + powering on retimers when there is no cable connected. + +What: /sys/bus/thunderbolt/devices/usb4_portX/rescan +Date: Sep 2021 +KernelVersion: v5.14 +Contact: Rajmohan Mani +Description: When the USB4 port is in offline mode writing 1 to this + attribute forces rescan of the sideband for on-board + retimers. Each retimer appear under the USB4 port as if + the USB4 link was up. These retimers act in the same way + as if the cable was connected so upgrading their NVM + firmware can be done the usual way. + +What: /sys/bus/thunderbolt/devices/:./device +Date: Oct 2020 +KernelVersion: v5.9 +Contact: Mika Westerberg +Description: Retimer device identifier read from the hardware. + +What: /sys/bus/thunderbolt/devices/:./nvm_authenticate +Date: Oct 2020 +KernelVersion: v5.9 +Contact: Mika Westerberg +Description: When new NVM image is written to the non-active NVM + area (through non_activeX NVMem device), the + authentication procedure is started by writing 1 to + this file. If everything goes well, the device is + restarted with the new NVM firmware. If the image + verification fails an error code is returned instead. + + When read holds status of the last authentication + operation if an error occurred during the process. + Format: %x. + +What: /sys/bus/thunderbolt/devices/:./nvm_version +Date: Oct 2020 +KernelVersion: v5.9 +Contact: Mika Westerberg +Description: Holds retimer NVM version number. Format: %x.%x, major.minor. + +What: /sys/bus/thunderbolt/devices/:./vendor +Date: Oct 2020 +KernelVersion: v5.9 +Contact: Mika Westerberg +Description: Retimer vendor identifier read from the hardware. -- cgit v1.2.3