From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- Documentation/admin-guide/spkguide.txt | 1620 ++++++++++++++++++++++++++++++++ 1 file changed, 1620 insertions(+) create mode 100644 Documentation/admin-guide/spkguide.txt (limited to 'Documentation/admin-guide/spkguide.txt') diff --git a/Documentation/admin-guide/spkguide.txt b/Documentation/admin-guide/spkguide.txt new file mode 100644 index 000000000..74ea7f391 --- /dev/null +++ b/Documentation/admin-guide/spkguide.txt @@ -0,0 +1,1620 @@ + +The Speakup User's Guide +For Speakup 3.1.2 and Later +By Gene Collins +Updated by others +Last modified on Mon Sep 27 14:26:31 2010 +Document version 1.3 + +Copyright (c) 2005 Gene Collins +Copyright (c) 2008 Samuel Thibault +Copyright (c) 2009, 2010 the Speakup Team + +Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.2 or +any later version published by the Free Software Foundation; with no +Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A +copy of the license is included in the section entitled "GNU Free +Documentation License". + +Preface + +The purpose of this document is to familiarize users with the user +interface to Speakup, a Linux Screen Reader. If you need instructions +for installing or obtaining Speakup, visit the web site at +http://linux-speakup.org/. Speakup is a set of patches to the standard +Linux kernel source tree. It can be built as a series of modules, or as +a part of a monolithic kernel. These details are beyond the scope of +this manual, but the user may need to be aware of the module +capabilities, depending on how your system administrator has installed +Speakup. If Speakup is built as a part of a monolithic kernel, and the +user is using a hardware synthesizer, then Speakup will be able to +provide speech access from the time the kernel is loaded, until the time +the system is shutdown. This means that if you have obtained Linux +installation media for a distribution which includes Speakup as a part +of its kernel, you will be able, as a blind person, to install Linux +with speech access unaided by a sighted person. Again, these details +are beyond the scope of this manual, but the user should be aware of +them. See the web site mentioned above for further details. + +1. Starting Speakup + +If your system administrator has installed Speakup to work with your +specific synthesizer by default, then all you need to do to use Speakup +is to boot your system, and Speakup should come up talking. This +assumes of course that your synthesizer is a supported hardware +synthesizer, and that it is either installed in or connected to your +system, and is if necessary powered on. + +It is possible, however, that Speakup may have been compiled into the +kernel with no default synthesizer. It is even possible that your +kernel has been compiled with support for some of the supported +synthesizers and not others. If you find that this is the case, and +your synthesizer is supported but not available, complain to the person +who compiled and installed your kernel. Or better yet, go to the web +site, and learn how to patch Speakup into your own kernel source, and +build and install your own kernel. + +If your kernel has been compiled with Speakup, and has no default +synthesizer set, or you would like to use a different synthesizer than +the default one, then you may issue the following command at the boot +prompt of your boot loader. + +linux speakup.synth=ltlk + +This command would tell Speakup to look for and use a LiteTalk or +DoubleTalk LT at boot up. You may replace the ltlk synthesizer keyword +with the keyword for whatever synthesizer you wish to use. The +speakup.synth parameter will accept the following keywords, provided +that support for the related synthesizers has been built into the +kernel. + +acntsa -- Accent SA +acntpc -- Accent PC +apollo -- Apollo +audptr -- Audapter +bns -- Braille 'n Speak +dectlk -- DecTalk Express (old and new, db9 serial only) +decext -- DecTalk (old) External +dtlk -- DoubleTalk PC +keypc -- Keynote Gold PC +ltlk -- DoubleTalk LT, LiteTalk, or external Tripletalk (db9 serial only) +spkout -- Speak Out +txprt -- Transport +dummy -- Plain text terminal + +Note: Speakup does * NOT * support usb connections! Speakup also does * +NOT * support the internal Tripletalk! + +Speakup does support two other synthesizers, but because they work in +conjunction with other software, they must be loaded as modules after +their related software is loaded, and so are not available at boot up. +These are as follows: + +decpc -- DecTalk PC (not available at boot up) +soft -- One of several software synthesizers (not available at boot up) + +See the sections on loading modules and software synthesizers later in +this manual for further details. It should be noted here that the +speakup.synth boot parameter will have no effect if Speakup has been +compiled as modules. In order for Speakup modules to be loaded during +the boot process, such action must be configured by your system +administrator. This will mean that you will hear some, but not all, of +the bootup messages. + +2. Basic operation + +Once you have booted the system, and if necessary, have supplied the +proper bootup parameter for your synthesizer, Speakup will begin +talking as soon as the kernel is loaded. In fact, it will talk a lot! +It will speak all the boot up messages that the kernel prints on the +screen during the boot process. This is because Speakup is not a +separate screen reader, but is actually built into the operating +system. Since almost all console applications must print text on the +screen using the kernel, and must get their keyboard input through the +kernel, they are automatically handled properly by Speakup. There are a +few exceptions, but we'll come to those later. + +Note: In this guide I will refer to the numeric keypad as the keypad. +This is done because the speakupmap.map file referred to later in this +manual uses the term keypad instead of numeric keypad. Also I'm lazy +and would rather only type one word. So keypad it is. Got it? Good. + +Most of the Speakup review keys are located on the keypad at the far +right of the keyboard. The numlock key should be off, in order for these +to work. If you toggle the numlock on, the keypad will produce numbers, +which is exactly what you want for spreadsheets and such. For the +purposes of this guide, you should have the numlock turned off, which is +its default state at bootup. + +You probably won't want to listen to all the bootup messages every time +you start your system, though it's a good idea to listen to them at +least once, just so you'll know what kind of information is available to +you during the boot process. You can always review these messages after +bootup with the command: + +dmesg | more + +In order to speed the boot process, and to silence the speaking of the +bootup messages, just press the keypad enter key. This key is located +in the bottom right corner of the keypad. Speakup will shut up and stay +that way, until you press another key. + +You can check to see if the boot process has completed by pressing the 8 +key on the keypad, which reads the current line. This also has the +effect of starting Speakup talking again, so you can press keypad enter +to silence it again if the boot process has not completed. + +When the boot process is complete, you will arrive at a "login" prompt. +At this point, you'll need to type in your user id and password, as +provided by your system administrator. You will hear Speakup speak the +letters of your user id as you type it, but not the password. This is +because the password is not displayed on the screen for security +reasons. This has nothing to do with Speakup, it's a Linux security +feature. + +Once you've logged in, you can run any Linux command or program which is +allowed by your user id. Normal users will not be able to run programs +which require root privileges. + +When you are running a program or command, Speakup will automatically +speak new text as it arrives on the screen. You can at any time silence +the speech with keypad enter, or use any of the Speakup review keys. + +Here are some basic Speakup review keys, and a short description of what +they do. + +keypad 1 -- read previous character +keypad 2 -- read current character (pressing keypad 2 twice rapidly will speak + the current character phonetically) +keypad 3 -- read next character +keypad 4 -- read previous word +keypad 5 -- read current word (press twice rapidly to spell the current word) +keypad 6 -- read next word +keypad 7 -- read previous line +keypad 8 -- read current line (press twice rapidly to hear how much the + text on the current line is indented) +keypad 9 -- read next line +keypad period -- speak current cursor position and announce current + virtual console + +It's also worth noting that the insert key on the keypad is mapped +as the speakup key. Instead of pressing and releasing this key, as you +do under DOS or Windows, you hold it like a shift key, and press other +keys in combination with it. For example, repeatedly holding keypad +insert, from now on called speakup, and keypad enter will toggle the +speaking of new text on the screen on and off. This is not the same as +just pressing keypad enter by itself, which just silences the speech +until you hit another key. When you hit speakup plus keypad enter, +Speakup will say, "You turned me off.", or "Hey, that's better." When +Speakup is turned off, no new text on the screen will be spoken. You +can still use the reading controls to review the screen however. + +3. Using the Speakup Help System + +In order to enter the Speakup help system, press and hold the speakup +key (remember that this is the keypad insert key), and press the f1 key. +You will hear the message: + +"Press space to leave help, cursor up or down to scroll, or a letter to +go to commands in list." + +When you press the spacebar to leave the help system, you will hear: + +"Leaving help." + +While you are in the Speakup help system, you can scroll up or down +through the list of available commands using the cursor keys. The list +of commands is arranged in alphabetical order. If you wish to jump to +commands in a specific part of the alphabet, you may press the letter of +the alphabet you wish to jump to. + +You can also just explore by typing keyboard keys. Pressing keys will +cause Speakup to speak the command associated with that key. For +example, if you press the keypad 8 key, you will hear: + +"Keypad 8 is line, say current." + +You'll notice that some commands do not have keys assigned to them. +This is because they are very infrequently used commands, and are also +accessible through the sys system. We'll discuss the sys system later +in this manual. + +You'll also notice that some commands have two keys assigned to them. +This is because Speakup has a built in set of alternative key bindings +for laptop users. The alternate speakup key is the caps lock key. You +can press and hold the caps lock key, while pressing an alternate +speakup command key to activate the command. On most laptops, the +numeric keypad is defined as the keys in the j k l area of the keyboard. + +There is usually a function key which turns this keypad function on and +off, and some other key which controls the numlock state. Toggling the +keypad functionality on and off can become a royal pain. So, Speakup +gives you a simple way to get at an alternative set of key mappings for +your laptop. These are also available by default on desktop systems, +because Speakup does not know whether it is running on a desktop or +laptop. So you may choose which set of Speakup keys to use. Some +system administrators may have chosen to compile Speakup for a desktop +system without this set of alternate key bindings, but these details are +beyond the scope of this manual. To use the caps lock for its normal +purpose, hold the shift key while toggling the caps lock on and off. We +should note here, that holding the caps lock key and pressing the z key +will toggle the alternate j k l keypad on and off. + +4. Keys and Their Assigned Commands + +In this section, we'll go through a list of all the speakup keys and +commands. You can also get a list of commands and assigned keys from +the help system. + +The following list was taken from the speakupmap.map file. Key +assignments are on the left of the equal sign, and the associated +Speakup commands are on the right. The designation "spk" means to press +and hold the speakup key, a.k.a. keypad insert, a.k.a. caps lock, while +pressing the other specified key. + +spk key_f9 = punc_level_dec +spk key_f10 = punc_level_inc +spk key_f11 = reading_punc_dec +spk key_f12 = reading_punc_inc +spk key_1 = vol_dec +spk key_2 = vol_inc +spk key_3 = pitch_dec +spk key_4 = pitch_inc +spk key_5 = rate_dec +spk key_6 = rate_inc +key_kpasterisk = toggle_cursoring +spk key_kpasterisk = speakup_goto +spk key_f1 = speakup_help +spk key_f2 = set_win +spk key_f3 = clear_win +spk key_f4 = enable_win +spk key_f5 = edit_some +spk key_f6 = edit_most +spk key_f7 = edit_delim +spk key_f8 = edit_repeat +shift spk key_f9 = edit_exnum + key_kp7 = say_prev_line +spk key_kp7 = left_edge + key_kp8 = say_line +double key_kp8 = say_line_indent +spk key_kp8 = say_from_top + key_kp9 = say_next_line +spk key_kp9 = top_edge + key_kpminus = speakup_parked +spk key_kpminus = say_char_num + key_kp4 = say_prev_word +spk key_kp4 = say_from_left + key_kp5 = say_word +double key_kp5 = spell_word +spk key_kp5 = spell_phonetic + key_kp6 = say_next_word +spk key_kp6 = say_to_right + key_kpplus = say_screen +spk key_kpplus = say_win + key_kp1 = say_prev_char +spk key_kp1 = right_edge + key_kp2 = say_char +spk key_kp2 = say_to_bottom +double key_kp2 = say_phonetic_char + key_kp3 = say_next_char +spk key_kp3 = bottom_edge + key_kp0 = spk_key + key_kpdot = say_position +spk key_kpdot = say_attributes +key_kpenter = speakup_quiet +spk key_kpenter = speakup_off +key_sysrq = speech_kill + key_kpslash = speakup_cut +spk key_kpslash = speakup_paste +spk key_pageup = say_first_char +spk key_pagedown = say_last_char +key_capslock = spk_key + spk key_z = spk_lock +key_leftmeta = spk_key +ctrl spk key_0 = speakup_goto +spk key_u = say_prev_line +spk key_i = say_line +double spk key_i = say_line_indent +spk key_o = say_next_line +spk key_minus = speakup_parked +shift spk key_minus = say_char_num +spk key_j = say_prev_word +spk key_k = say_word +double spk key_k = spell_word +spk key_l = say_next_word +spk key_m = say_prev_char +spk key_comma = say_char +double spk key_comma = say_phonetic_char +spk key_dot = say_next_char +spk key_n = say_position + ctrl spk key_m = left_edge + ctrl spk key_y = top_edge + ctrl spk key_dot = right_edge +ctrl spk key_p = bottom_edge +spk key_apostrophe = say_screen +spk key_h = say_from_left +spk key_y = say_from_top +spk key_semicolon = say_to_right +spk key_p = say_to_bottom +spk key_slash = say_attributes + spk key_enter = speakup_quiet + ctrl spk key_enter = speakup_off + spk key_9 = speakup_cut +spk key_8 = speakup_paste +shift spk key_m = say_first_char + ctrl spk key_semicolon = say_last_char +spk key_r = read_all_doc + +5. The Speakup Sys System + +The Speakup screen reader also creates a speakup subdirectory as a part +of the sys system. + +As a convenience, run as root + +ln -s /sys/accessibility/speakup /speakup + +to directly access speakup parameters from /speakup. +You can see these entries by typing the command: + +ls -1 /speakup/* + +If you issue the above ls command, you will get back something like +this: + +/speakup/attrib_bleep +/speakup/bell_pos +/speakup/bleep_time +/speakup/bleeps +/speakup/cursor_time +/speakup/delimiters +/speakup/ex_num +/speakup/key_echo +/speakup/keymap +/speakup/no_interrupt +/speakup/punc_all +/speakup/punc_level +/speakup/punc_most +/speakup/punc_some +/speakup/reading_punc +/speakup/repeats +/speakup/say_control +/speakup/say_word_ctl +/speakup/silent +/speakup/spell_delay +/speakup/synth +/speakup/synth_direct +/speakup/version + +/speakup/i18n: +announcements +characters +chartab +colors +ctl_keys +formatted +function_names +key_names +states + +/speakup/soft: +caps_start +caps_stop +delay_time +direct +freq +full_time +jiffy_delta +pitch +inflection +punct +rate +tone +trigger_time +voice +vol + +Notice the two subdirectories of /speakup: /speakup/i18n and +/speakup/soft. +The i18n subdirectory is described in a later section. +The files under /speakup/soft represent settings that are specific to the +driver for the software synthesizer. If you use the LiteTalk, your +synthesizer-specific settings would be found in /speakup/ltlk. In other words, +a subdirectory named /speakup/KWD is created to hold parameters specific +to the device whose keyword is KWD. +These parameters include volume, rate, pitch, and others. + +In addition to using the Speakup hot keys to change such things as +volume, pitch, and rate, you can also echo values to the appropriate +entry in the /speakup directory. This is very useful, since it +lets you control Speakup parameters from within a script. How you +would write such scripts is somewhat beyond the scope of this manual, +but I will include a couple of simple examples here to give you a +general idea of what such scripts can do. + +Suppose for example, that you wanted to control both the punctuation +level and the reading punctuation level at the same time. For +simplicity, we'll call them punc0, punc1, punc2, and punc3. The scripts +might look something like this: + +#!/bin/bash +# punc0 +# set punc and reading punc levels to 0 +echo 0 >/speakup/punc_level +echo 0 >/speakup/reading_punc +echo Punctuation level set to 0. + +#!/bin/bash +# punc1 +# set punc and reading punc levels to 1 +echo 1 >/speakup/punc_level +echo 1 >/speakup/reading_punc +echo Punctuation level set to 1. + +#!/bin/bash +# punc2 +# set punc and reading punc levels to 2 +echo 2 >/speakup/punc_level +echo 2 >/speakup/reading_punc +echo Punctuation level set to 2. + +#!/bin/bash +# punc3 +# set punc and reading punc levels to 3 +echo 3 >/speakup/punc_level +echo 3 >/speakup/reading_punc +echo Punctuation level set to 3. + +If you were to store these four small scripts in a directory in your +path, perhaps /usr/local/bin, and set the permissions to 755 with the +chmod command, then you could change the default reading punc and +punctuation levels at the same time by issuing just one command. For +example, if you were to execute the punc3 command at your shell prompt, +then the reading punc and punc level would both get set to 3. + +I should note that the above scripts were written to work with bash, but +regardless of which shell you use, you should be able to do something +similar. + +The Speakup sys system also has another interesting use. You can echo +Speakup parameters into the sys system in a script during system +startup, and speakup will return to your preferred parameters every time +the system is rebooted. + +Most of the Speakup sys parameters can be manipulated by a regular user +on the system. However, there are a few parameters that are dangerous +enough that they should only be manipulated by the root user on your +system. There are even some parameters that are read only, and cannot +be written to at all. For example, the version entry in the Speakup +sys system is read only. This is because there is no reason for a user +to tamper with the version number which is reported by Speakup. Doing +an ls -l on /speakup/version will return this: + +-r--r--r-- 1 root root 0 Mar 21 13:46 /speakup/version + +As you can see, the version entry in the Speakup sys system is read +only, is owned by root, and belongs to the root group. Doing a cat of +/speakup/version will display the Speakup version number, like +this: + +cat /speakup/version +Speakup v-2.00 CVS: Thu Oct 21 10:38:21 EDT 2004 +synth dtlk version 1.1 + +The display shows the Speakup version number, along with the version +number of the driver for the current synthesizer. + +Looking at entries in the Speakup sys system can be useful in many +ways. For example, you might wish to know what level your volume is set +at. You could type: + +cat /speakup/KWD/vol +# Replace KWD with the keyword for your synthesizer, E.G., ltlk for LiteTalk. +5 + +The number five which comes back is the level at which the synthesizer +volume is set at. + +All the entries in the Speakup sys system are readable, some are +writable by root only, and some are writable by everyone. Unless you +know what you are doing, you should probably leave the ones that are +writable by root only alone. Most of the names are self explanatory. +Vol for controlling volume, pitch for pitch, inflection for pitch range, rate +for controlling speaking rate, etc. If you find one you aren't sure about, you +can post a query on the Speakup list. + +6. Changing Synthesizers + +It is possible to change to a different synthesizer while speakup is +running. In other words, it is not necessary to reboot the system +in order to use a different synthesizer. You can simply echo the +synthesizer keyword to the /speakup/synth sys entry. +Depending on your situation, you may wish to echo none to the synth +sys entry, to disable speech while one synthesizer is disconnected and +a second one is connected in its place. Then echo the keyword for the +new synthesizer into the synth sys entry in order to start speech +with the newly connected synthesizer. See the list of synthesizer +keywords in section 1 to find the keyword which matches your synth. + +7. Loading modules + +As mentioned earlier, Speakup can either be completely compiled into the +kernel, with the exception of the help module, or it can be compiled as +a series of modules. When compiled as modules, Speakup will only be +able to speak some of the bootup messages if your system administrator +has configured the system to load the modules at boot time. The modules +can be loaded after the file systems have been checked and mounted, or +from an initrd. There is a third possibility. Speakup can be compiled +with some components built into the kernel, and others as modules. As +we'll see in the next section, this is particularly useful when you are +working with software synthesizers. + +If Speakup is completely compiled as modules, then you must use the +modprobe command to load Speakup. You do this by loading the module for +the synthesizer driver you wish to use. The driver modules are all +named speakup_, where is the keyword for the +synthesizer you want. So, in order to load the driver for the DecTalk +Express, you would type the following command: + +modprobe speakup_dectlk + +Issuing this command would load the DecTalk Express driver and all other +related Speakup modules necessary to get Speakup up and running. + +To completely unload Speakup, again presuming that it is entirely built +as modules, you would give the command: + +modprobe -r speakup_dectlk + +The above command assumes you were running a DecTalk Express. If you +were using a different synth, then you would substitute its keyword in +place of dectlk. + +If you have multiple drivers loaded, you need to unload all of them, in +order to completely unload Speakup. +For example, if you have loaded both the dectlk and ltlk drivers, use the +command: +modprobe -r speakup_dectlk speakup_ltlk + +You cannot unload the driver for software synthesizers when a user-space +daemon is using /dev/softsynth. First, kill the daemon. Next, remove +the driver with the command: +modprobe -r speakup_soft + +Now, suppose we have a situation where the main Speakup component +is built into the kernel, and some or all of the drivers are built as +modules. Since the main part of Speakup is compiled into the kernel, a +partial Speakup sys system has been created which we can take advantage +of by simply echoing the synthesizer keyword into the +/speakup/synth sys entry. This will cause the kernel to +automatically load the appropriate driver module, and start Speakup +talking. To switch to another synth, just echo a new keyword to the +synth sys entry. For example, to load the DoubleTalk LT driver, +you would type: + +echo ltlk >/speakup/synth + +You can use the modprobe -r command to unload driver modules, regardless +of whether the main part of Speakup has been built into the kernel or +not. + +8. Using Software Synthesizers + +Using a software synthesizer requires that some other software be +installed and running on your system. For this reason, software +synthesizers are not available for use at bootup, or during a system +installation process. +There are two freely-available solutions for software speech: Espeakup and +Speech Dispatcher. +These are described in subsections 8.1 and 8.2, respectively. + +During the rest of this section, we assume that speakup_soft is either +built in to your kernel, or loaded as a module. + +If your system does not have udev installed , before you can use a +software synthesizer, you must have created the /dev/softsynth device. +If you have not already done so, issue the following commands as root: + +cd /dev +mknod softsynth c 10 26 + +While we are at it, we might just as well create the /dev/synth device, +which can be used to let user space programs send information to your +synthesizer. To create /dev/synth, change to the /dev directory, and +issue the following command as root: + +mknod synth c 10 25 + +of both. + +8.1. Espeakup + +Espeakup is a connector between Speakup and the eSpeak software synthesizer. +Espeakup may already be available as a package for your distribution +of Linux. If it is not packaged, you need to install it manually. +You can find it in the contrib/ subdirectory of the Speakup sources. +The filename is espeakup-$VERSION.tar.bz2, where $VERSION +depends on the current release of Espeakup. The Speakup 3.1.2 source +ships with version 0.71 of Espeakup. +The README file included with the Espeakup sources describes the process +of manual installation. + +Assuming that Espeakup is installed, either by the user or by the distributor, +follow these steps to use it. + +Tell Speakup to use the "soft driver: +echo soft > /speakup/synth + +Finally, start the espeakup program. There are two ways to do it. +Both require root privileges. + +If Espeakup was installed as a package for your Linux distribution, +you probably have a distribution-specific script that controls the operation +of the daemon. Look for a file named espeakup under /etc/init.d or +/etc/rc.d. Execute the following command with root privileges: +/etc/init.d/espeakup start +Replace init.d with rc.d, if your distribution uses scripts located under +/etc/rc.d. +Your distribution will also have a procedure for starting daemons at +boot-time, so it is possible to have software speech as soon as user-space +daemons are started by the bootup scripts. +These procedures are not described in this document. + +If you built Espeakup manually, the "make install" step placed the binary +under /usr/bin. +Run the following command as root: +/usr/bin/espeakup +Espeakup should start speaking. + +8.2. Speech Dispatcher + +For this option, you must have a package called +Speech Dispatcher running on your system, and it must be configured to +work with one of its supported software synthesizers. + +Two open source synthesizers you might use are Flite and Festival. You +might also choose to purchase the Software DecTalk from Fonix Sales Inc. +If you run a google search for Fonix, you'll find their web site. + +You can obtain a copy of Speech Dispatcher from free(b)soft at +http://www.freebsoft.org/. Follow the installation instructions that +come with Speech Dispatcher in order to install and configure Speech +Dispatcher. You can check out the web site for your Linux distribution +in order to get a copy of either Flite or Festival. Your Linux +distribution may also have a precompiled Speech Dispatcher package. + +Once you've installed, configured, and tested Speech Dispatcher with your +chosen software synthesizer, you still need one more piece of software +in order to make things work. You need a package called speechd-up. +You get it from the free(b)soft web site mentioned above. After you've +compiled and installed speechd-up, you are almost ready to begin using +your software synthesizer. + +Now you can begin using your software synthesizer. In order to do so, +echo the soft keyword to the synth sys entry like this: + +echo soft >/speakup/synth + +Next run the speechd_up command like this: + +speechd_up & + +Your synth should now start talking, and you should be able to adjust +the pitch, rate, etc. + +9. Using The DecTalk PC Card + +The DecTalk PC card is an ISA card that is inserted into one of the ISA +slots in your computer. It requires that the DecTalk PC software be +installed on your computer, and that the software be loaded onto the +Dectalk PC card before it can be used. + +You can get the dec_pc.tgz file from the linux-speakup.org site. The +dec_pc.tgz file is in the ~ftp/pub/linux/speakup directory. + +After you have downloaded the dec_pc.tgz file, untar it in your home +directory, and read the Readme file in the newly created dec_pc +directory. + +The easiest way to get the software working is to copy the entire dec_pc +directory into /user/local/lib. To do this, su to root in your home +directory, and issue the command: + +cp dec_pc /usr/local/lib + +You will need to copy the dtload command from the dec_pc directory to a +directory in your path. Either /usr/bin or /usr/local/bin is a good +choice. + +You can now run the dtload command in order to load the DecTalk PC +software onto the card. After you have done this, echo the decpc +keyword to the synth entry in the sys system like this: + +echo decpc >/speakup/synth + +Your DecTalk PC should start talking, and then you can adjust the pitch, +rate, volume, voice, etc. The voice entry in the Speakup sys system +will accept a number from 0 through 7 for the DecTalk PC synthesizer, +which will give you access to some of the DecTalk voices. + +10. Using Cursor Tracking + +In Speakup version 2.0 and later, cursor tracking is turned on by +default. This means that when you are using an editor, Speakup will +automatically speak characters as you move left and right with the +cursor keys, and lines as you move up and down with the cursor keys. +This is the traditional sort of cursor tracking. +Recent versions of Speakup provide two additional ways to control the +text that is spoken when the cursor is moved: +"highlight tracking" and "read window." +They are described later in this section. +Sometimes, these modes get in your way, so you can disable cursor tracking +altogether. + +You may select among the various forms of cursor tracking using the keypad +asterisk key. +Each time you press this key, a new mode is selected, and Speakup speaks +the name of the new mode. The names for the four possible states of cursor +tracking are: "cursoring on", "highlight tracking", "read window", +and "cursoring off." The keypad asterisk key moves through the list of +modes in a circular fashion. + +If highlight tracking is enabled, Speakup tracks highlighted text, +rather than the cursor itself. When you move the cursor with the arrow keys, +Speakup speaks the currently highlighted information. +This is useful when moving through various menus and dialog boxes. +If cursor tracking isn't helping you while navigating a menu, +try highlight tracking. + +With the "read window" variety of cursor tracking, you can limit the text +that Speakup speaks by specifying a window of interest on the screen. +See section 15 for a description of the process of defining windows. +When you move the cursor via the arrow keys, Speakup only speaks +the contents of the window. This is especially helpful when you are hearing +superfluous speech. Consider the following example. + +Suppose that you are at a shell prompt. You use bash, and you want to +explore your command history using the up and down arrow keys. If you +have enabled cursor tracking, you will hear two pieces of information. +Speakup speaks both your shell prompt and the current entry from the +command history. You may not want to hear the prompt repeated +each time you move, so you can silence it by specifying a window. Find +the last line of text on the screen. Clear the current window by pressing +the key combination speakup f3. Use the review cursor to find the first +character that follows your shell prompt. Press speakup + f2 twice, to +define a one-line window. The boundaries of the window are the +character following the shell prompt and the end of the line. Now, cycle +through the cursor tracking modes using keypad asterisk, until Speakup +says "read window." Move through your history using your arrow keys. +You will notice that Speakup no longer speaks the redundant prompt. + +Some folks like to turn cursor tracking off while they are using the +lynx web browser. You definitely want to turn cursor tracking off when +you are using the alsamixer application. Otherwise, you won't be able +to hear your mixer settings while you are using the arrow keys. + +11. Cut and Paste + +One of Speakup's more useful features is the ability to cut and paste +text on the screen. This means that you can capture information from a +program, and paste that captured text into a different place in the +program, or into an entirely different program, which may even be +running on a different console. + +For example, in this manual, we have made references to several web +sites. It would be nice if you could cut and paste these urls into your +web browser. Speakup does this quite nicely. Suppose you wanted to +past the following url into your browser: + +http://linux-speakup.org/ + +Use the speakup review keys to position the reading cursor on the first +character of the above url. When the reading cursor is in position, +press the keypad slash key once. Speakup will say, "mark". Next, +position the reading cursor on the rightmost character of the above +url. Press the keypad slash key once again to actually cut the text +from the screen. Speakup will say, "cut". Although we call this +cutting, Speakup does not actually delete the cut text from the screen. +It makes a copy of the text in a special buffer for later pasting. + +Now that you have the url cut from the screen, you can paste it into +your browser, or even paste the url on a command line as an argument to +your browser. + +Suppose you want to start lynx and go to the Speakup site. + +You can switch to a different console with the alt left and right +arrows, or you can switch to a specific console by typing alt and a +function key. These are not Speakup commands, just standard Linux +console capabilities. + +Once you've changed to an appropriate console, and are at a shell prompt, +type the word lynx, followed by a space. Now press and hold the speakup +key, while you type the keypad slash character. The url will be pasted +onto the command line, just as though you had typed it in. Press the +enter key to execute the command. + +The paste buffer will continue to hold the cut information, until a new +mark and cut operation is carried out. This means you can paste the cut +information as many times as you like before doing another cut +operation. + +You are not limited to cutting and pasting only one line on the screen. +You can also cut and paste rectangular regions of the screen. Just +position the reading cursor at the top left corner of the text to be +cut, mark it with the keypad slash key, then position the reading cursor +at the bottom right corner of the region to be cut, and cut it with the +keypad slash key. + +12. Changing the Pronunciation of Characters + +Through the /speakup/i18n/characters sys entry, Speakup gives you the +ability to change how Speakup pronounces a given character. You could, +for example, change how some punctuation characters are spoken. You can +even change how Speakup will pronounce certain letters. + +You may, for example, wish to change how Speakup pronounces the z +character. The author of Speakup, Kirk Reiser, is Canadian, and thus +believes that the z should be pronounced zed. If you are an American, +you might wish to use the zee pronunciation instead of zed. You can +change the pronunciation of both the upper and lower case z with the +following two commands: + +echo 90 zee >/speakup/characters +echo 122 zee >/speakup/characters + +Let's examine the parts of the two previous commands. They are issued +at the shell prompt, and could be placed in a startup script. + +The word echo tells the shell that you want to have it display the +string of characters that follow the word echo. If you were to just +type: + +echo hello. + +You would get the word hello printed on your screen as soon as you +pressed the enter key. In this case, we are echoing strings that we +want to be redirected into the sys system. + +The numbers 90 and 122 in the above echo commands are the ascii numeric +values for the upper and lower case z, the characters we wish to change. + +The string zee is the pronunciation that we want Speakup to use for the +upper and lower case z. + +The > symbol redirects the output of the echo command to a file, just +like in DOS, or at the Windows command prompt. + +And finally, /speakup/i18n/characters is the file entry in the sys system +where we want the output to be directed. Speakup looks at the numeric +value of the character we want to change, and inserts the pronunciation +string into an internal table. + +You can look at the whole table with the following command: + +cat /speakup/i18n/characters + +Speakup will then print out the entire character pronunciation table. I +won't display it here, but leave you to look at it at your convenience. + +13. Mapping Keys + +Speakup has the capability of allowing you to assign or "map" keys to +internal Speakup commands. This section necessarily assumes you have a +Linux kernel source tree installed, and that it has been patched and +configured with Speakup. How you do this is beyond the scope of this +manual. For this information, visit the Speakup web site at +http://linux-speakup.org/. The reason you'll need the kernel source +tree patched with Speakup is that the genmap utility you'll need for +processing keymaps is in the +/usr/src/linux-/drivers/char/speakup directory. The + in the above directory path is the version number of +the Linux source tree you are working with. + +So ok, you've gone off and gotten your kernel source tree, and patched +and configured it. Now you can start manipulating keymaps. + +You can either use the +/usr/src/linux-/drivers/char/speakup/speakupmap.map file +included with the Speakup source, or you can cut and paste the copy in +section 4 into a separate file. If you use the one in the Speakup +source tree, make sure you make a backup of it before you start making +changes. You have been warned! + +Suppose that you want to swap the key assignments for the Speakup +say_last_char and the Speakup say_first_char commands. The +speakupmap.map lists the key mappings for these two commands as follows: + +spk key_pageup = say_first_char +spk key_pagedown = say_last_char + +You can edit your copy of the speakupmap.map file and swap the command +names on the right side of the = (equals) sign. You did make a backup, +right? The new keymap lines would look like this: + +spk key_pageup = say_last_char +spk key_pagedown = say_first_char + +After you edit your copy of the speakupmap.map file, save it under a new +file name, perhaps newmap.map. Then exit your editor and return to the +shell prompt. + +You are now ready to load your keymap with your swapped key assignments. + Assuming that you saved your new keymap as the file newmap.map, you +would load your keymap into the sys system like this: + +/usr/src/linux-/drivers/char/speakup/genmap newmap.map +>/speakup/keymap + +Remember to substitute your kernel version number for the + in the above command. Also note that although the +above command wrapped onto two lines in this document, you should type +it all on one line. + +Your say first and say last characters should now be swapped. Pressing +speakup pagedown should read you the first non-whitespace character on +the line your reading cursor is in, and pressing speakup pageup should +read you the last character on the line your reading cursor is in. + +You should note that these new mappings will only stay in effect until +you reboot, or until you load another keymap. + +One final warning. If you try to load a partial map, you will quickly +find that all the mappings you didn't include in your file got deleted +from the working map. Be extremely careful, and always make a backup! +You have been warned! + +14. Internationalizing Speakup + +Speakup indicates various conditions to the user by speaking messages. +For instance, when you move to the left edge of the screen with the +review keys, Speakup says, "left." +Prior to version 3.1.0 of Speakup, all of these messages were in English, +and they could not be changed. If you used a non-English synthesizer, +you still heard English messages, such as "left" and "cursoring on." +In version 3.1.0 or higher, one may load translations for the various +messages via the /sys filesystem. + +The directory /speakup/i18n contains several collections of messages. +Each group of messages is stored in its own file. +The following section lists all of these files, along with a brief description +of each. + +14.1. Files Under the i18n Subdirectory + +* announcements: +This file contains various general announcements, most of which cannot +be categorized. You will find messages such as "You killed Speakup", +"I'm alive", "leaving help", "parked", "unparked", and others. +You will also find the names of the screen edges and cursor tracking modes +here. + +* characters: +See section 12 for a description of this file. + +* chartab: +See section 12. Unlike the rest of the files in the i18n subdirectory, +this one does not contain messages to be spoken. + +* colors: +When you use the "say attributes" function, Speakup says the name of the +foreground and background colors. These names come from the i18n/colors +file. + +* ctl_keys: +Here, you will find names of control keys. These are used with Speakup's +say_control feature. + +* formatted: +This group of messages contains embedded formatting codes, to specify +the type and width of displayed data. If you change these, you must +preserve all of the formatting codes, and they must appear in the order +used by the default messages. + +* function_names: +Here, you will find a list of names for Speakup functions. These are used +by the help system. For example, suppose that you have activated help mode, +and you pressed keypad 3. Speakup says: +"keypad 3 is character, say next." +The message "character, say next" names a Speakup function, and it +comes from this function_names file. + +* key_names: +Again, key_names is used by Speakup's help system. In the previous +example, Speakup said that you pressed "keypad 3." +This name came from the key_names file. + +* states: +This file contains names for key states. +Again, these are part of the help system. For instance, if you had pressed +speakup + keypad 3, you would hear: +"speakup keypad 3 is go to bottom edge." +The speakup key is depressed, so the name of the key state is speakup. +This part of the message comes from the states collection. + +14.2. Changing language + +14.2.1. Loading Your Own Messages + +The files under the i18n subdirectory all follow the same format. +They consist of lines, with one message per line. +Each message is represented by a number, followed by the text of the message. +The number is the position of the message in the given collection. +For example, if you view the file /speakup/i18n/colors, you will see the +following list: + +0 black +1 blue +2 green +3 cyan +4 red +5 magenta +6 yellow +7 white +8 grey + +You can change one message, or you can change a whole group. +To load a whole collection of messages from a new source, simply use +the cp command: +cp ~/my_colors /speakup/i18n/colors +You can change an individual message with the echo command, +as shown in the following example. + +The Spanish name for the color blue is azul. +Looking at the colors file, we see that the name "blue" is at position 1 +within the colors group. Let's change blue to azul: +echo '1 azul' > /speakup/i18n/colors +The next time that Speakup says message 1 from the colors group, it will +say "azul", rather than "blue." + +14.2.2. Choose a language + +In the future, translations into various languages will be made available, +and most users will just load the files necessary for their language. So far, +only French language is available beyond native Canadian English language. + +French is only available after you are logged in. + +Canadian English is the default language. To toggle another language, +download the source of Speakup and untar it in your home directory. The +following command should let you do this: + +tar xvjf speakup-.tar.bz2 + +where is the version number of the application. + +Next, change to the newly created directory, then into the tools/ directory, and +run the script speakup_setlocale. You are asked the language that you want to +use. Type the number associated to your language (e.g. fr for French) then press +Enter. Needed files are copied in the i18n directory. + +Note: the speakupconf must be installed on your system so that settings are saved. +Otherwise, you will have an error: your language will be loaded but you will +have to run the script again every time Speakup restarts. +See section 16.1. for information about speakupconf. + +You will have to repeat these steps for any change of locale, i.e. if you wish +change the speakup's language or charset (iso-8859-15 ou UTF-8). + +If you wish store the settings, note that at your next login, you will need to +do: + +speakup load + +Alternatively, you can add the above line to your file +~/.bashrc or ~/.bash_profile. + +If your system administrator himself ran the script, all the users will be able +to change from English to the language chosen by root and do directly +speakupconf load (or add this to the ~/.bashrc or +~/.bash_profile file). If there are several languages to handle, the +administrator (or every user) will have to run the first steps until speakupconf +save, choosing the appropriate language, in every user's home directory. Every +user will then be able to do speakupconf load, Speakup will load his own settings. + +14.3. No Support for Non-Western-European Languages + +As of the current release, Speakup only supports Western European languages. +Support for the extended characters used by languages outside of the Western +European family of languages is a work in progress. + +15. Using Speakup's Windowing Capability + +Speakup has the capability of defining and manipulating windows on the +screen. Speakup uses the term "Window", to mean a user defined area of +the screen. The key strokes for defining and manipulating Speakup +windows are as follows: + +speakup + f2 -- Set the bounds of the window. +Speakup + f3 -- clear the current window definition. +speakup + f4 -- Toggle window silence on and off. +speakup + keypad plus -- Say the currently defined window. + +These capabilities are useful for tracking a certain part of the screen +without rereading the whole screen, or for silencing a part of the +screen that is constantly changing, such as a clock or status line. + +There is no way to save these window settings, and you can only have one +window defined for each virtual console. There is also no way to have +windows automatically defined for specific applications. + +In order to define a window, use the review keys to move your reading +cursor to the beginning of the area you want to define. Then press +speakup + f2. Speakup will tell you that the window starts at the +indicated row and column position. Then move the reading cursor to the +end of the area to be defined as a window, and press speakup + f2 again. + If there is more than one line in the window, Speakup will tell you +that the window ends at the indicated row and column position. If there +is only one line in the window, then Speakup will tell you that the +window is the specified line on the screen. If you are only defining a +one line window, you can just press speakup + f2 twice after placing the +reading cursor on the line you want to define as a window. It is not +necessary to position the reading cursor at the end of the line in order +to define the whole line as a window. + +16. Tools for Controlling Speakup + +The speakup distribution includes extra tools (in the tools directory) +which were written to make speakup easier to use. This section will +briefly describe the use of these tools. + +16.1. Speakupconf + +speakupconf began life as a contribution from Steve Holmes, a member of +the speakup community. We would like to thank him for his work on the +early versions of this project. + +This script may be installed as part of your linux distribution, but if +it isn't, the recommended places to put it are /usr/local/bin or +/usr/bin. This script can be run by any user, so it does not require +root privileges. + +Speakupconf allows you to save and load your Speakup settings. It works +by reading and writing the /sys files described above. + +The directory that speakupconf uses to store your settings depends on +whether it is run from the root account. If you execute speakupconf as +root, it uses the directory /etc/speakup. Otherwise, it uses the directory +~/.speakup, where ~ is your home directory. +Anyone who needs to use Speakup from your console can load his own custom +settings with this script. + +speakupconf takes one required argument: load or save. +Use the command +speakupconf save +to save your Speakup settings, and +speakupconf load +to load them into Speakup. +A second argument may be specified to use an alternate directory to +load or save the speakup parameters. + +16.2. Talkwith + +Charles Hallenbeck, another member of the speakup community, wrote the +initial versions of this script, and we would also like to thank him for +his work on it. + +This script needs root privileges to run, so if it is not installed as +part of your linux distribution, the recommended places to install it +are /usr/local/sbin or /usr/sbin. + +Talkwith allows you to switch synthesizers on the fly. It takes a synthesizer +name as an argument. For instance, +talkwith dectlk +causes Speakup to use the DecTalk Express. If you wish to switch to a +software synthesizer, you must also indicate which daemon you wish to +use. There are two possible choices: +spd and espeakup. spd is an abbreviation for speechd-up. +If you wish to use espeakup for software synthesis, give the command +talkwith soft espeakup +To use speechd-up, type: +talkwith soft spd +Any arguments that follow the name of the daemon are passed to the daemon +when it is invoked. For instance: +talkwith espeakup --default-voice=fr +causes espeakup to use the French voice. +Note that talkwith must always be executed with root privileges. + +Talkwith does not attempt to load your settings after the new +synthesizer is activated. You can use speakupconf to load your settings +if desired. + + GNU Free Documentation License + Version 1.2, November 2002 + + + Copyright (C) 2000,2001,2002 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + +0. PREAMBLE + +The purpose of this License is to make a manual, textbook, or other +functional and useful document "free" in the sense of freedom: to +assure everyone the effective freedom to copy and redistribute it, +with or without modifying it, either commercially or noncommercially. +Secondarily, this License preserves for the author and publisher a way +to get credit for their work, while not being considered responsible +for modifications made by others. + +This License is a kind of "copyleft", which means that derivative +works of the document must themselves be free in the same sense. It +complements the GNU General Public License, which is a copyleft +license designed for free software. + +We have designed this License in order to use it for manuals for free +software, because free software needs free documentation: a free +program should come with manuals providing the same freedoms that the +software does. But this License is not limited to software manuals; +it can be used for any textual work, regardless of subject matter or +whether it is published as a printed book. We recommend this License +principally for works whose purpose is instruction or reference. + + +1. APPLICABILITY AND DEFINITIONS + +This License applies to any manual or other work, in any medium, that +contains a notice placed by the copyright holder saying it can be +distributed under the terms of this License. Such a notice grants a +world-wide, royalty-free license, unlimited in duration, to use that +work under the conditions stated herein. The "Document", below, +refers to any such manual or work. Any member of the public is a +licensee, and is addressed as "you". You accept the license if you +copy, modify or distribute the work in a way requiring permission +under copyright law. + +A "Modified Version" of the Document means any work containing the +Document or a portion of it, either copied verbatim, or with +modifications and/or translated into another language. + +A "Secondary Section" is a named appendix or a front-matter section of +the Document that deals exclusively with the relationship of the +publishers or authors of the Document to the Document's overall subject +(or to related matters) and contains nothing that could fall directly +within that overall subject. (Thus, if the Document is in part a +textbook of mathematics, a Secondary Section may not explain any +mathematics.) The relationship could be a matter of historical +connection with the subject or with related matters, or of legal, +commercial, philosophical, ethical or political position regarding +them. + +The "Invariant Sections" are certain Secondary Sections whose titles +are designated, as being those of Invariant Sections, in the notice +that says that the Document is released under this License. If a +section does not fit the above definition of Secondary then it is not +allowed to be designated as Invariant. The Document may contain zero +Invariant Sections. If the Document does not identify any Invariant +Sections then there are none. + +The "Cover Texts" are certain short passages of text that are listed, +as Front-Cover Texts or Back-Cover Texts, in the notice that says that +the Document is released under this License. A Front-Cover Text may +be at most 5 words, and a Back-Cover Text may be at most 25 words. + +A "Transparent" copy of the Document means a machine-readable copy, +represented in a format whose specification is available to the +general public, that is suitable for revising the document +straightforwardly with generic text editors or (for images composed of +pixels) generic paint programs or (for drawings) some widely available +drawing editor, and that is suitable for input to text formatters or +for automatic translation to a variety of formats suitable for input +to text formatters. A copy made in an otherwise Transparent file +format whose markup, or absence of markup, has been arranged to thwart +or discourage subsequent modification by readers is not Transparent. +An image format is not Transparent if used for any substantial amount +of text. A copy that is not "Transparent" is called "Opaque". + +Examples of suitable formats for Transparent copies include plain +ASCII without markup, Texinfo input format, LaTeX input format, SGML +or XML using a publicly available DTD, and standard-conforming simple +HTML, PostScript or PDF designed for human modification. Examples of +transparent image formats include PNG, XCF and JPG. Opaque formats +include proprietary formats that can be read and edited only by +proprietary word processors, SGML or XML for which the DTD and/or +processing tools are not generally available, and the +machine-generated HTML, PostScript or PDF produced by some word +processors for output purposes only. + +The "Title Page" means, for a printed book, the title page itself, +plus such following pages as are needed to hold, legibly, the material +this License requires to appear in the title page. For works in +formats which do not have any title page as such, "Title Page" means +the text near the most prominent appearance of the work's title, +preceding the beginning of the body of the text. + +A section "Entitled XYZ" means a named subunit of the Document whose +title either is precisely XYZ or contains XYZ in parentheses following +text that translates XYZ in another language. (Here XYZ stands for a +specific section name mentioned below, such as "Acknowledgements", +"Dedications", "Endorsements", or "History".) To "Preserve the Title" +of such a section when you modify the Document means that it remains a +section "Entitled XYZ" according to this definition. + +The Document may include Warranty Disclaimers next to the notice which +states that this License applies to the Document. These Warranty +Disclaimers are considered to be included by reference in this +License, but only as regards disclaiming warranties: any other +implication that these Warranty Disclaimers may have is void and has +no effect on the meaning of this License. + + +2. VERBATIM COPYING + +You may copy and distribute the Document in any medium, either +commercially or noncommercially, provided that this License, the +copyright notices, and the license notice saying this License applies +to the Document are reproduced in all copies, and that you add no other +conditions whatsoever to those of this License. You may not use +technical measures to obstruct or control the reading or further +copying of the copies you make or distribute. However, you may accept +compensation in exchange for copies. If you distribute a large enough +number of copies you must also follow the conditions in section 3. + +You may also lend copies, under the same conditions stated above, and +you may publicly display copies. + + +3. COPYING IN QUANTITY + +If you publish printed copies (or copies in media that commonly have +printed covers) of the Document, numbering more than 100, and the +Document's license notice requires Cover Texts, you must enclose the +copies in covers that carry, clearly and legibly, all these Cover +Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on +the back cover. Both covers must also clearly and legibly identify +you as the publisher of these copies. The front cover must present +the full title with all words of the title equally prominent and +visible. You may add other material on the covers in addition. +Copying with changes limited to the covers, as long as they preserve +the title of the Document and satisfy these conditions, can be treated +as verbatim copying in other respects. + +If the required texts for either cover are too voluminous to fit +legibly, you should put the first ones listed (as many as fit +reasonably) on the actual cover, and continue the rest onto adjacent +pages. + +If you publish or distribute Opaque copies of the Document numbering +more than 100, you must either include a machine-readable Transparent +copy along with each Opaque copy, or state in or with each Opaque copy +a computer-network location from which the general network-using +public has access to download using public-standard network protocols +a complete Transparent copy of the Document, free of added material. +If you use the latter option, you must take reasonably prudent steps, +when you begin distribution of Opaque copies in quantity, to ensure +that this Transparent copy will remain thus accessible at the stated +location until at least one year after the last time you distribute an +Opaque copy (directly or through your agents or retailers) of that +edition to the public. + +It is requested, but not required, that you contact the authors of the +Document well before redistributing any large number of copies, to give +them a chance to provide you with an updated version of the Document. + + +4. MODIFICATIONS + +You may copy and distribute a Modified Version of the Document under +the conditions of sections 2 and 3 above, provided that you release +the Modified Version under precisely this License, with the Modified +Version filling the role of the Document, thus licensing distribution +and modification of the Modified Version to whoever possesses a copy +of it. In addition, you must do these things in the Modified Version: + +A. Use in the Title Page (and on the covers, if any) a title distinct + from that of the Document, and from those of previous versions + (which should, if there were any, be listed in the History section + of the Document). You may use the same title as a previous version + if the original publisher of that version gives permission. +B. List on the Title Page, as authors, one or more persons or entities + responsible for authorship of the modifications in the Modified + Version, together with at least five of the principal authors of the + Document (all of its principal authors, if it has fewer than five), + unless they release you from this requirement. +C. State on the Title page the name of the publisher of the + Modified Version, as the publisher. +D. Preserve all the copyright notices of the Document. +E. Add an appropriate copyright notice for your modifications + adjacent to the other copyright notices. +F. Include, immediately after the copyright notices, a license notice + giving the public permission to use the Modified Version under the + terms of this License, in the form shown in the Addendum below. +G. Preserve in that license notice the full lists of Invariant Sections + and required Cover Texts given in the Document's license notice. +H. Include an unaltered copy of this License. +I. Preserve the section Entitled "History", Preserve its Title, and add + to it an item stating at least the title, year, new authors, and + publisher of the Modified Version as given on the Title Page. If + there is no section Entitled "History" in the Document, create one + stating the title, year, authors, and publisher of the Document as + given on its Title Page, then add an item describing the Modified + Version as stated in the previous sentence. +J. Preserve the network location, if any, given in the Document for + public access to a Transparent copy of the Document, and likewise + the network locations given in the Document for previous versions + it was based on. These may be placed in the "History" section. + You may omit a network location for a work that was published at + least four years before the Document itself, or if the original + publisher of the version it refers to gives permission. +K. For any section Entitled "Acknowledgements" or "Dedications", + Preserve the Title of the section, and preserve in the section all + the substance and tone of each of the contributor acknowledgements + and/or dedications given therein. +L. Preserve all the Invariant Sections of the Document, + unaltered in their text and in their titles. Section numbers + or the equivalent are not considered part of the section titles. +M. Delete any section Entitled "Endorsements". Such a section + may not be included in the Modified Version. +N. Do not retitle any existing section to be Entitled "Endorsements" + or to conflict in title with any Invariant Section. +O. Preserve any Warranty Disclaimers. + +If the Modified Version includes new front-matter sections or +appendices that qualify as Secondary Sections and contain no material +copied from the Document, you may at your option designate some or all +of these sections as invariant. To do this, add their titles to the +list of Invariant Sections in the Modified Version's license notice. +These titles must be distinct from any other section titles. + +You may add a section Entitled "Endorsements", provided it contains +nothing but endorsements of your Modified Version by various +parties--for example, statements of peer review or that the text has +been approved by an organization as the authoritative definition of a +standard. + +You may add a passage of up to five words as a Front-Cover Text, and a +passage of up to 25 words as a Back-Cover Text, to the end of the list +of Cover Texts in the Modified Version. Only one passage of +Front-Cover Text and one of Back-Cover Text may be added by (or +through arrangements made by) any one entity. If the Document already +includes a cover text for the same cover, previously added by you or +by arrangement made by the same entity you are acting on behalf of, +you may not add another; but you may replace the old one, on explicit +permission from the previous publisher that added the old one. + +The author(s) and publisher(s) of the Document do not by this License +give permission to use their names for publicity for or to assert or +imply endorsement of any Modified Version. + + +5. COMBINING DOCUMENTS + +You may combine the Document with other documents released under this +License, under the terms defined in section 4 above for modified +versions, provided that you include in the combination all of the +Invariant Sections of all of the original documents, unmodified, and +list them all as Invariant Sections of your combined work in its +license notice, and that you preserve all their Warranty Disclaimers. + +The combined work need only contain one copy of this License, and +multiple identical Invariant Sections may be replaced with a single +copy. If there are multiple Invariant Sections with the same name but +different contents, make the title of each such section unique by +adding at the end of it, in parentheses, the name of the original +author or publisher of that section if known, or else a unique number. +Make the same adjustment to the section titles in the list of +Invariant Sections in the license notice of the combined work. + +In the combination, you must combine any sections Entitled "History" +in the various original documents, forming one section Entitled +"History"; likewise combine any sections Entitled "Acknowledgements", +and any sections Entitled "Dedications". You must delete all sections +Entitled "Endorsements". + + +6. COLLECTIONS OF DOCUMENTS + +You may make a collection consisting of the Document and other documents +released under this License, and replace the individual copies of this +License in the various documents with a single copy that is included in +the collection, provided that you follow the rules of this License for +verbatim copying of each of the documents in all other respects. + +You may extract a single document from such a collection, and distribute +it individually under this License, provided you insert a copy of this +License into the extracted document, and follow this License in all +other respects regarding verbatim copying of that document. + + +7. AGGREGATION WITH INDEPENDENT WORKS + +A compilation of the Document or its derivatives with other separate +and independent documents or works, in or on a volume of a storage or +distribution medium, is called an "aggregate" if the copyright +resulting from the compilation is not used to limit the legal rights +of the compilation's users beyond what the individual works permit. +When the Document is included in an aggregate, this License does not +apply to the other works in the aggregate which are not themselves +derivative works of the Document. + +If the Cover Text requirement of section 3 is applicable to these +copies of the Document, then if the Document is less than one half of +the entire aggregate, the Document's Cover Texts may be placed on +covers that bracket the Document within the aggregate, or the +electronic equivalent of covers if the Document is in electronic form. +Otherwise they must appear on printed covers that bracket the whole +aggregate. + + +8. TRANSLATION + +Translation is considered a kind of modification, so you may +distribute translations of the Document under the terms of section 4. +Replacing Invariant Sections with translations requires special +permission from their copyright holders, but you may include +translations of some or all Invariant Sections in addition to the +original versions of these Invariant Sections. You may include a +translation of this License, and all the license notices in the +Document, and any Warranty Disclaimers, provided that you also include +the original English version of this License and the original versions +of those notices and disclaimers. In case of a disagreement between +the translation and the original version of this License or a notice +or disclaimer, the original version will prevail. + +If a section in the Document is Entitled "Acknowledgements", +"Dedications", or "History", the requirement (section 4) to Preserve +its Title (section 1) will typically require changing the actual +title. + + +9. TERMINATION + +You may not copy, modify, sublicense, or distribute the Document except +as expressly provided for under this License. Any other attempt to +copy, modify, sublicense or distribute the Document is void, and will +automatically terminate your rights under this License. However, +parties who have received copies, or rights, from you under this +License will not have their licenses terminated so long as such +parties remain in full compliance. + + +10. FUTURE REVISIONS OF THIS LICENSE + +The Free Software Foundation may publish new, revised versions +of the GNU Free Documentation License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. See +https://www.gnu.org/copyleft/. + +Each version of the License is given a distinguishing version number. +If the Document specifies that a particular numbered version of this +License "or any later version" applies to it, you have the option of +following the terms and conditions either of that specified version or +of any later version that has been published (not as a draft) by the +Free Software Foundation. If the Document does not specify a version +number of this License, you may choose any version ever published (not +as a draft) by the Free Software Foundation. + + +ADDENDUM: How to use this License for your documents + +To use this License in a document you have written, include a copy of +the License in the document and put the following copyright and +license notices just after the title page: + + Copyright (c) YEAR YOUR NAME. + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.2 + or any later version published by the Free Software Foundation; + with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. + A copy of the license is included in the section entitled "GNU + Free Documentation License". + +If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, +replace the "with...Texts." line with this: + + with the Invariant Sections being LIST THEIR TITLES, with the + Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST. + +If you have Invariant Sections without Cover Texts, or some other +combination of the three, merge those two alternatives to suit the +situation. + +If your document contains nontrivial examples of program code, we +recommend releasing these examples in parallel under your choice of +free software license, such as the GNU General Public License, +to permit their use in free software. + +The End. -- cgit v1.2.3