From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- Documentation/arch/sh/register-banks.rst | 40 ++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 Documentation/arch/sh/register-banks.rst (limited to 'Documentation/arch/sh/register-banks.rst') diff --git a/Documentation/arch/sh/register-banks.rst b/Documentation/arch/sh/register-banks.rst new file mode 100644 index 0000000000..2bef5c8fcb --- /dev/null +++ b/Documentation/arch/sh/register-banks.rst @@ -0,0 +1,40 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================================== +Notes on register bank usage in the kernel +========================================== + +Introduction +------------ + +The SH-3 and SH-4 CPU families traditionally include a single partial register +bank (selected by SR.RB, only r0 ... r7 are banked), whereas other families +may have more full-featured banking or simply no such capabilities at all. + +SR.RB banking +------------- + +In the case of this type of banking, banked registers are mapped directly to +r0 ... r7 if SR.RB is set to the bank we are interested in, otherwise ldc/stc +can still be used to reference the banked registers (as r0_bank ... r7_bank) +when in the context of another bank. The developer must keep the SR.RB value +in mind when writing code that utilizes these banked registers, for obvious +reasons. Userspace is also not able to poke at the bank1 values, so these can +be used rather effectively as scratch registers by the kernel. + +Presently the kernel uses several of these registers. + + - r0_bank, r1_bank (referenced as k0 and k1, used for scratch + registers when doing exception handling). + + - r2_bank (used to track the EXPEVT/INTEVT code) + + - Used by do_IRQ() and friends for doing irq mapping based off + of the interrupt exception vector jump table offset + + - r6_bank (global interrupt mask) + + - The SR.IMASK interrupt handler makes use of this to set the + interrupt priority level (used by local_irq_enable()) + + - r7_bank (current) -- cgit v1.2.3