From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- Documentation/core-api/maple_tree.rst | 217 ++++++++++++++++++++++++++++++++++ 1 file changed, 217 insertions(+) create mode 100644 Documentation/core-api/maple_tree.rst (limited to 'Documentation/core-api/maple_tree.rst') diff --git a/Documentation/core-api/maple_tree.rst b/Documentation/core-api/maple_tree.rst new file mode 100644 index 000000000..45defcf15 --- /dev/null +++ b/Documentation/core-api/maple_tree.rst @@ -0,0 +1,217 @@ +.. SPDX-License-Identifier: GPL-2.0+ + + +========== +Maple Tree +========== + +:Author: Liam R. Howlett + +Overview +======== + +The Maple Tree is a B-Tree data type which is optimized for storing +non-overlapping ranges, including ranges of size 1. The tree was designed to +be simple to use and does not require a user written search method. It +supports iterating over a range of entries and going to the previous or next +entry in a cache-efficient manner. The tree can also be put into an RCU-safe +mode of operation which allows reading and writing concurrently. Writers must +synchronize on a lock, which can be the default spinlock, or the user can set +the lock to an external lock of a different type. + +The Maple Tree maintains a small memory footprint and was designed to use +modern processor cache efficiently. The majority of the users will be able to +use the normal API. An :ref:`maple-tree-advanced-api` exists for more complex +scenarios. The most important usage of the Maple Tree is the tracking of the +virtual memory areas. + +The Maple Tree can store values between ``0`` and ``ULONG_MAX``. The Maple +Tree reserves values with the bottom two bits set to '10' which are below 4096 +(ie 2, 6, 10 .. 4094) for internal use. If the entries may use reserved +entries then the users can convert the entries using xa_mk_value() and convert +them back by calling xa_to_value(). If the user needs to use a reserved +value, then the user can convert the value when using the +:ref:`maple-tree-advanced-api`, but are blocked by the normal API. + +The Maple Tree can also be configured to support searching for a gap of a given +size (or larger). + +Pre-allocating of nodes is also supported using the +:ref:`maple-tree-advanced-api`. This is useful for users who must guarantee a +successful store operation within a given +code segment when allocating cannot be done. Allocations of nodes are +relatively small at around 256 bytes. + +.. _maple-tree-normal-api: + +Normal API +========== + +Start by initialising a maple tree, either with DEFINE_MTREE() for statically +allocated maple trees or mt_init() for dynamically allocated ones. A +freshly-initialised maple tree contains a ``NULL`` pointer for the range ``0`` +- ``ULONG_MAX``. There are currently two types of maple trees supported: the +allocation tree and the regular tree. The regular tree has a higher branching +factor for internal nodes. The allocation tree has a lower branching factor +but allows the user to search for a gap of a given size or larger from either +``0`` upwards or ``ULONG_MAX`` down. An allocation tree can be used by +passing in the ``MT_FLAGS_ALLOC_RANGE`` flag when initialising the tree. + +You can then set entries using mtree_store() or mtree_store_range(). +mtree_store() will overwrite any entry with the new entry and return 0 on +success or an error code otherwise. mtree_store_range() works in the same way +but takes a range. mtree_load() is used to retrieve the entry stored at a +given index. You can use mtree_erase() to erase an entire range by only +knowing one value within that range, or mtree_store() call with an entry of +NULL may be used to partially erase a range or many ranges at once. + +If you want to only store a new entry to a range (or index) if that range is +currently ``NULL``, you can use mtree_insert_range() or mtree_insert() which +return -EEXIST if the range is not empty. + +You can search for an entry from an index upwards by using mt_find(). + +You can walk each entry within a range by calling mt_for_each(). You must +provide a temporary variable to store a cursor. If you want to walk each +element of the tree then ``0`` and ``ULONG_MAX`` may be used as the range. If +the caller is going to hold the lock for the duration of the walk then it is +worth looking at the mas_for_each() API in the :ref:`maple-tree-advanced-api` +section. + +Sometimes it is necessary to ensure the next call to store to a maple tree does +not allocate memory, please see :ref:`maple-tree-advanced-api` for this use case. + +Finally, you can remove all entries from a maple tree by calling +mtree_destroy(). If the maple tree entries are pointers, you may wish to free +the entries first. + +Allocating Nodes +---------------- + +The allocations are handled by the internal tree code. See +:ref:`maple-tree-advanced-alloc` for other options. + +Locking +------- + +You do not have to worry about locking. See :ref:`maple-tree-advanced-locks` +for other options. + +The Maple Tree uses RCU and an internal spinlock to synchronise access: + +Takes RCU read lock: + * mtree_load() + * mt_find() + * mt_for_each() + * mt_next() + * mt_prev() + +Takes ma_lock internally: + * mtree_store() + * mtree_store_range() + * mtree_insert() + * mtree_insert_range() + * mtree_erase() + * mtree_destroy() + * mt_set_in_rcu() + * mt_clear_in_rcu() + +If you want to take advantage of the internal lock to protect the data +structures that you are storing in the Maple Tree, you can call mtree_lock() +before calling mtree_load(), then take a reference count on the object you +have found before calling mtree_unlock(). This will prevent stores from +removing the object from the tree between looking up the object and +incrementing the refcount. You can also use RCU to avoid dereferencing +freed memory, but an explanation of that is beyond the scope of this +document. + +.. _maple-tree-advanced-api: + +Advanced API +============ + +The advanced API offers more flexibility and better performance at the +cost of an interface which can be harder to use and has fewer safeguards. +You must take care of your own locking while using the advanced API. +You can use the ma_lock, RCU or an external lock for protection. +You can mix advanced and normal operations on the same array, as long +as the locking is compatible. The :ref:`maple-tree-normal-api` is implemented +in terms of the advanced API. + +The advanced API is based around the ma_state, this is where the 'mas' +prefix originates. The ma_state struct keeps track of tree operations to make +life easier for both internal and external tree users. + +Initialising the maple tree is the same as in the :ref:`maple-tree-normal-api`. +Please see above. + +The maple state keeps track of the range start and end in mas->index and +mas->last, respectively. + +mas_walk() will walk the tree to the location of mas->index and set the +mas->index and mas->last according to the range for the entry. + +You can set entries using mas_store(). mas_store() will overwrite any entry +with the new entry and return the first existing entry that is overwritten. +The range is passed in as members of the maple state: index and last. + +You can use mas_erase() to erase an entire range by setting index and +last of the maple state to the desired range to erase. This will erase +the first range that is found in that range, set the maple state index +and last as the range that was erased and return the entry that existed +at that location. + +You can walk each entry within a range by using mas_for_each(). If you want +to walk each element of the tree then ``0`` and ``ULONG_MAX`` may be used as +the range. If the lock needs to be periodically dropped, see the locking +section mas_pause(). + +Using a maple state allows mas_next() and mas_prev() to function as if the +tree was a linked list. With such a high branching factor the amortized +performance penalty is outweighed by cache optimization. mas_next() will +return the next entry which occurs after the entry at index. mas_prev() +will return the previous entry which occurs before the entry at index. + +mas_find() will find the first entry which exists at or above index on +the first call, and the next entry from every subsequent calls. + +mas_find_rev() will find the fist entry which exists at or below the last on +the first call, and the previous entry from every subsequent calls. + +If the user needs to yield the lock during an operation, then the maple state +must be paused using mas_pause(). + +There are a few extra interfaces provided when using an allocation tree. +If you wish to search for a gap within a range, then mas_empty_area() +or mas_empty_area_rev() can be used. mas_empty_area() searches for a gap +starting at the lowest index given up to the maximum of the range. +mas_empty_area_rev() searches for a gap starting at the highest index given +and continues downward to the lower bound of the range. + +.. _maple-tree-advanced-alloc: + +Advanced Allocating Nodes +------------------------- + +Allocations are usually handled internally to the tree, however if allocations +need to occur before a write occurs then calling mas_expected_entries() will +allocate the worst-case number of needed nodes to insert the provided number of +ranges. This also causes the tree to enter mass insertion mode. Once +insertions are complete calling mas_destroy() on the maple state will free the +unused allocations. + +.. _maple-tree-advanced-locks: + +Advanced Locking +---------------- + +The maple tree uses a spinlock by default, but external locks can be used for +tree updates as well. To use an external lock, the tree must be initialized +with the ``MT_FLAGS_LOCK_EXTERN flag``, this is usually done with the +MTREE_INIT_EXT() #define, which takes an external lock as an argument. + +Functions and structures +======================== + +.. kernel-doc:: include/linux/maple_tree.h +.. kernel-doc:: lib/maple_tree.c -- cgit v1.2.3