From 85c675d0d09a45a135bddd15d7b385f8758c32fb Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sat, 18 May 2024 19:35:05 +0200
Subject: Adding upstream version 6.7.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 Documentation/devicetree/bindings/firmware/arm,scmi.yaml | 15 +++++++++++++--
 Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 10 ++++++++++
 2 files changed, 23 insertions(+), 2 deletions(-)

(limited to 'Documentation/devicetree/bindings/firmware')

diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index b138f3d23d..4591523b51 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -38,6 +38,9 @@ properties:
                      with shmem address(4KB-page, offset) as parameters
         items:
           - const: arm,scmi-smc-param
+      - description: SCMI compliant firmware with Qualcomm SMC/HVC transport
+        items:
+          - const: qcom,scmi-smc
       - description: SCMI compliant firmware with SCMI Virtio transport.
                      The virtio transport only supports a single device.
         items:
@@ -149,8 +152,15 @@ properties:
       '#clock-cells':
         const: 1
 
-    required:
-      - '#clock-cells'
+      '#power-domain-cells':
+        const: 1
+
+    oneOf:
+      - required:
+          - '#clock-cells'
+
+      - required:
+          - '#power-domain-cells'
 
   protocol@14:
     $ref: '#/$defs/protocol-node'
@@ -306,6 +316,7 @@ else:
           enum:
             - arm,scmi-smc
             - arm,scmi-smc-param
+            - qcom,scmi-smc
   then:
     required:
       - arm,smc-id
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index 4233ea839b..0613a37a85 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -24,6 +24,7 @@ properties:
           - qcom,scm-apq8064
           - qcom,scm-apq8084
           - qcom,scm-ipq4019
+          - qcom,scm-ipq5018
           - qcom,scm-ipq5332
           - qcom,scm-ipq6018
           - qcom,scm-ipq806x
@@ -56,6 +57,7 @@ properties:
           - qcom,scm-sm6125
           - qcom,scm-sm6350
           - qcom,scm-sm6375
+          - qcom,scm-sm7150
           - qcom,scm-sm8150
           - qcom,scm-sm8250
           - qcom,scm-sm8350
@@ -89,6 +91,14 @@ properties:
       protocol to handle sleeping SCM calls.
     maxItems: 1
 
+  qcom,sdi-enabled:
+    description:
+      Indicates that the SDI (Secure Debug Image) has been enabled by TZ
+      by default and it needs to be disabled.
+      If not disabled WDT assertion or reboot will cause the board to hang
+      in the debug mode.
+    type: boolean
+
   qcom,dload-mode:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-- 
cgit v1.2.3