From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- .../bindings/interrupt-controller/atmel,aic.txt | 43 ++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt (limited to 'Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt') diff --git a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt new file mode 100644 index 0000000000..7079d44bf3 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt @@ -0,0 +1,43 @@ +* Advanced Interrupt Controller (AIC) + +Required properties: +- compatible: Should be: + - "atmel,-aic" where can be "at91rm9200", "sama5d2", + "sama5d3" or "sama5d4" + - "microchip,-aic" where can be "sam9x60" + +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: The number of cells to define the interrupts. It should be 3. + The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet). + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + Valid combinations are 1, 2, 3, 4, 8. + Default flag for internal sources should be set to 4 (active high). + The third cell is used to specify the irq priority from 0 (lowest) to 7 + (highest). +- reg: Should contain AIC registers location and length +- atmel,external-irqs: u32 array of external irqs. + +Examples: + /* + * AIC + */ + aic: interrupt-controller@fffff000 { + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xfffff000 0x200>; + }; + + /* + * An interrupt generating device that is wired to an AIC. + */ + dma: dma-controller@ffffec00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffec00 0x200>; + interrupts = <21 4 5>; + }; -- cgit v1.2.3