From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- .../bindings/mailbox/hisilicon,hi6220-mailbox.txt | 74 ++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt (limited to 'Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt') diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt new file mode 100644 index 0000000000..044b17f3a7 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt @@ -0,0 +1,74 @@ +Hisilicon Hi6220 Mailbox Driver +=============================== + +Hisilicon Hi6220 mailbox supports up to 32 channels. Each channel +is unidirectional with a maximum message size of 8 words. I/O is +performed using register access (there is no DMA) and the cell +raises an interrupt when messages are received. + +Mailbox Device Node: +==================== + +Required properties: +-------------------- +- compatible: Shall be "hisilicon,hi6220-mbox" +- reg: Contains the mailbox register address range (base + address and length); the first item is for IPC + registers, the second item is shared buffer for + slots. +- #mbox-cells: Common mailbox binding property to identify the number + of cells required for the mailbox specifier. Must be 3. + <&phandle slot_id dst_irq ack_irq> + phandle: Label name of mailbox controller + slot_id: Slot id used either for TX or RX + dst_irq: IRQ identifier index number which used by MCU + ack_irq: IRQ identifier index number with generating a + TX/RX interrupt to application processor, + mailbox driver uses it to acknowledge interrupt +- interrupts: Contains the interrupt information for the mailbox + device. The format is dependent on which interrupt + controller the SoCs use. + +Optional Properties: +-------------------- +- hi6220,mbox-tx-noirq: Property of MCU firmware's feature, so mailbox driver + use this flag to ask MCU to enable "automatic idle + flag" mode or IRQ generated mode to acknowledge a TX + completion. + +Example: +-------- + + mailbox: mailbox@f7510000 { + compatible = "hisilicon,hi6220-mbox"; + reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */ + <0x0 0x06dff800 0x0 0x0800>; /* Mailbox */ + interrupt-parent = <&gic>; + interrupts = ; + #mbox-cells = <3>; + }; + + +Mailbox client +=============== + +Required properties: +-------------------- +- compatible: Many (See the client docs). +- mboxes: Standard property to specify a Mailbox (See ./mailbox.txt) + Cells must match 'mbox-cells' (See Mailbox Device Node above). + +Optional Properties: +-------------------- +- mbox-names: Name given to channels seen in the 'mboxes' property. + +Example: +-------- + + stub_clock: stub_clock { + compatible = "hisilicon,hi6220-stub-clk"; + hisilicon,hi6220-clk-sram = <&sram>; + #clock-cells = <1>; + mbox-names = "mbox-tx", "mbox-rx"; + mboxes = <&mailbox 1 0 11>, <&mailbox 0 1 10>; + }; -- cgit v1.2.3