From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- .../bindings/pinctrl/lantiq,pinctrl-xway.txt | 158 +++++++++++++++++++++ 1 file changed, 158 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt (limited to 'Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt') diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt new file mode 100644 index 0000000000..6bd9bc61be --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt @@ -0,0 +1,158 @@ +Lantiq XWAY pinmux controller + +Required properties: +- compatible: "lantiq,-pinctrl", where is: + "ase" (XWAY AMAZON Family) + "danube" (XWAY DANUBE Family) + "xrx100" (XWAY xRX100 Family) + "xrx200" (XWAY xRX200 Family) + "xrx300" (XWAY xRX300 Family) +- reg: Should contain the physical address and length of the gpio/pinmux + register range + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Lantiq's pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those group(s), and two pin configuration parameters: +pull-up and open-drain + +The name of each subnode is not important as long as it is unique; all subnodes +should be enumerated and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +We support 2 types of nodes. + +Definition of mux function groups: + +Required subnode-properties: +- lantiq,groups : An array of strings. Each string contains the name of a group. + Valid values for these names are listed below. +- lantiq,function: A string containing the name of the function to mux to the + group. Valid values for function names are listed below. + +Valid values for group and function names: + +AMAZON: + mux groups: + exin0, exin1, exin2, jtag, spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, + spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc, stp, gpt1, gpt2, gpt3, clkout0, + clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2 + + functions: + spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe + +DANUBE: + mux groups: + exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, + ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1, + spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, + gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, + req1, req2, req3, dfe led0, dfe led1 + + functions: + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe + +xRX100: + mux groups: + exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk, + ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd, + spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, + spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, + clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, + dfe led0, dfe led1 + + functions: + spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe + +xRX200: + mux groups: + exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk, + ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd, + spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, + spi_cs6, usif uart_rx, usif uart_tx, usif uart_rts, usif uart_cts, + usif uart_dtr, usif uart_dsr, usif uart_dcd, usif uart_ri, usif spi_di, + usif spi_do, usif spi_clk, usif spi_cs0, usif spi_cs1, usif spi_cs2, + stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, + gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, dfe led0, dfe led1, + gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2 + + functions: + spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy + +xRX300: + mux groups: + exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle, + nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5, + nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do, + spi_clk, spi_cs1, spi_cs4, spi_cs6, usif uart_rx, usif uart_tx, + usif spi_di, usif spi_do, usif spi_clk, usif spi_cs0, stp, clkout2, + mdio, dfe led0, dfe led1, ephy0 led0, ephy0 led1, ephy1 led0, ephy1 led1 + + functions: + spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy + + +Definition of pin configurations: + +Required subnode-properties: +- lantiq,pins : An array of strings. Each string contains the name of a pin. + Valid values for these names are listed below. + +Optional subnode-properties: +- lantiq,pull: Integer, representing the pull-down/up to apply to the pin. + 0: none, 1: down, 2: up. +- lantiq,open-drain: Boolean, enables open-drain on the defined pin. + +Valid values for AMAZON pin names: + Pinconf pins can be referenced via the names io0-io31. + +Valid values for DANUBE pin names: + Pinconf pins can be referenced via the names io0-io31. + +Valid values for xRX100 pin names: + Pinconf pins can be referenced via the names io0-io55. + +Valid values for xRX200 pin names: + Pinconf pins can be referenced via the names io0-io49. + +Valid values for xRX300 pin names: + Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11, + io13-io19,io23-io27,io34-io36, + io42-io43,io48-io61. + +Example: + gpio: pinmux@e100b10 { + compatible = "lantiq,danube-pinctrl"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + }; + pci { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + }; + conf_out { + lantiq,pins = "io4", "io5", "io6"; /* stp */ + lantiq,open-drain; + lantiq,pull = <0>; + }; + }; + }; + -- cgit v1.2.3