From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/power/avs/qcom,cpr.yaml | 161 +++++++++++++++++++++ 1 file changed, 161 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml (limited to 'Documentation/devicetree/bindings/power/avs') diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml new file mode 100644 index 0000000000..2fd2178d1f --- /dev/null +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/avs/qcom,cpr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Core Power Reduction (CPR) + +maintainers: + - Niklas Cassel + +description: | + CPR (Core Power Reduction) is a technology to reduce core power on a CPU + or other device. Each OPP of a device corresponds to a "corner" that has + a range of valid voltages for a particular frequency. While the device is + running at a particular frequency, CPR monitors dynamic factors such as + temperature, etc. and suggests adjustments to the voltage to save power + and meet silicon characteristic requirements. + +properties: + compatible: + items: + - enum: + - qcom,qcs404-cpr + - const: qcom,cpr + + reg: + description: Base address and size of the RBCPR register region. + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Reference clock. + + clock-names: + items: + - const: ref + + vdd-apc-supply: + description: APC regulator supply. + + '#power-domain-cells': + const: 0 + + operating-points-v2: + description: | + A phandle to the OPP table containing the performance states + supported by the CPR power domain. + + acc-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the syscon used for writing ACC settings. + + nvmem-cells: + items: + - description: Corner 1 quotient offset + - description: Corner 2 quotient offset + - description: Corner 3 quotient offset + - description: Corner 1 initial voltage + - description: Corner 2 initial voltage + - description: Corner 3 initial voltage + - description: Corner 1 quotient + - description: Corner 2 quotient + - description: Corner 3 quotient + - description: Corner 1 ring oscillator + - description: Corner 2 ring oscillator + - description: Corner 3 ring oscillator + - description: Fuse revision + + nvmem-cell-names: + items: + - const: cpr_quotient_offset1 + - const: cpr_quotient_offset2 + - const: cpr_quotient_offset3 + - const: cpr_init_voltage1 + - const: cpr_init_voltage2 + - const: cpr_init_voltage3 + - const: cpr_quotient1 + - const: cpr_quotient2 + - const: cpr_quotient3 + - const: cpr_ring_osc1 + - const: cpr_ring_osc2 + - const: cpr_ring_osc3 + - const: cpr_fuse_revision + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vdd-apc-supply + - '#power-domain-cells' + - operating-points-v2 + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + #include + + cpr_opp_table: opp-table-cpr { + compatible = "operating-points-v2-qcom-level"; + + cpr_opp1: opp1 { + opp-level = <1>; + qcom,opp-fuse-level = <1>; + }; + cpr_opp2: opp2 { + opp-level = <2>; + qcom,opp-fuse-level = <2>; + }; + cpr_opp3: opp3 { + opp-level = <3>; + qcom,opp-fuse-level = <3>; + }; + }; + + power-controller@b018000 { + compatible = "qcom,qcs404-cpr", "qcom,cpr"; + reg = <0x0b018000 0x1000>; + interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; + clocks = <&xo_board>; + clock-names = "ref"; + vdd-apc-supply = <&pms405_s3>; + #power-domain-cells = <0>; + operating-points-v2 = <&cpr_opp_table>; + acc-syscon = <&tcsr>; + + nvmem-cells = <&cpr_efuse_quot_offset1>, + <&cpr_efuse_quot_offset2>, + <&cpr_efuse_quot_offset3>, + <&cpr_efuse_init_voltage1>, + <&cpr_efuse_init_voltage2>, + <&cpr_efuse_init_voltage3>, + <&cpr_efuse_quot1>, + <&cpr_efuse_quot2>, + <&cpr_efuse_quot3>, + <&cpr_efuse_ring1>, + <&cpr_efuse_ring2>, + <&cpr_efuse_ring3>, + <&cpr_efuse_revision>; + nvmem-cell-names = "cpr_quotient_offset1", + "cpr_quotient_offset2", + "cpr_quotient_offset3", + "cpr_init_voltage1", + "cpr_init_voltage2", + "cpr_init_voltage3", + "cpr_quotient1", + "cpr_quotient2", + "cpr_quotient3", + "cpr_ring_osc1", + "cpr_ring_osc2", + "cpr_ring_osc3", + "cpr_fuse_revision"; + }; -- cgit v1.2.3