From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/regulator/88pg86x.txt | 22 + .../devicetree/bindings/regulator/88pm800.txt | 38 ++ .../devicetree/bindings/regulator/88pm860x.txt | 30 ++ .../bindings/regulator/active-semi,act8600.yaml | 139 ++++++ .../bindings/regulator/active-semi,act8846.yaml | 167 +++++++ .../bindings/regulator/active-semi,act8865.yaml | 158 +++++++ .../bindings/regulator/active-semi,act8945a.yaml | 258 +++++++++++ .../bindings/regulator/adi,max77541-regulator.yaml | 38 ++ .../bindings/regulator/adi,max77857.yaml | 86 ++++ .../bindings/regulator/anatop-regulator.yaml | 93 ++++ .../bindings/regulator/as3722-regulator.txt | 91 ++++ .../bindings/regulator/awinic,aw37503.yaml | 78 ++++ .../bindings/regulator/cpcap-regulator.txt | 35 ++ .../devicetree/bindings/regulator/da9210.txt | 29 ++ .../devicetree/bindings/regulator/da9211.txt | 205 +++++++++ .../devicetree/bindings/regulator/dlg,da9121.yaml | 213 +++++++++ .../bindings/regulator/dlg,slg51000.yaml | 132 ++++++ .../bindings/regulator/fcs,fan53555.yaml | 73 +++ .../bindings/regulator/fixed-regulator.yaml | 146 ++++++ .../regulator/google,cros-ec-regulator.yaml | 54 +++ .../bindings/regulator/gpio-regulator.yaml | 120 +++++ .../regulator/hisilicon,hi655x-regulator.txt | 29 ++ .../devicetree/bindings/regulator/isl9305.txt | 36 ++ .../bindings/regulator/lm363x-regulator.txt | 108 +++++ .../devicetree/bindings/regulator/lp872x.txt | 161 +++++++ .../devicetree/bindings/regulator/ltc3589.txt | 99 ++++ .../devicetree/bindings/regulator/ltc3676.txt | 94 ++++ .../bindings/regulator/max1586-regulator.txt | 28 ++ .../bindings/regulator/max77650-regulator.yaml | 35 ++ .../devicetree/bindings/regulator/max8660.yaml | 73 +++ .../devicetree/bindings/regulator/max8893.yaml | 88 ++++ .../devicetree/bindings/regulator/max8907.txt | 69 +++ .../bindings/regulator/max8925-regulator.txt | 40 ++ .../bindings/regulator/maxim,max14577.yaml | 78 ++++ .../bindings/regulator/maxim,max20086.yaml | 106 +++++ .../bindings/regulator/maxim,max20411.yaml | 58 +++ .../bindings/regulator/maxim,max77686.yaml | 83 ++++ .../bindings/regulator/maxim,max77693.yaml | 60 +++ .../bindings/regulator/maxim,max77802.yaml | 86 ++++ .../bindings/regulator/maxim,max77826.yaml | 65 +++ .../bindings/regulator/maxim,max77843.yaml | 65 +++ .../bindings/regulator/maxim,max8952.yaml | 109 +++++ .../bindings/regulator/maxim,max8973.yaml | 141 ++++++ .../bindings/regulator/maxim,max8997.yaml | 446 ++++++++++++++++++ .../bindings/regulator/mcp16502-regulator.txt | 144 ++++++ .../regulator/mediatek,mt6331-regulator.yaml | 273 +++++++++++ .../regulator/mediatek,mt6332-regulator.yaml | 112 +++++ .../regulator/mediatek,mt6357-regulator.yaml | 294 ++++++++++++ .../devicetree/bindings/regulator/mp8859.txt | 22 + .../devicetree/bindings/regulator/mps,mp5416.yaml | 78 ++++ .../devicetree/bindings/regulator/mps,mp886x.yaml | 63 +++ .../devicetree/bindings/regulator/mps,mpq7920.yaml | 117 +++++ .../devicetree/bindings/regulator/mps,mpq7932.yaml | 68 +++ .../bindings/regulator/mt6311-regulator.txt | 35 ++ .../bindings/regulator/mt6315-regulator.yaml | 70 +++ .../bindings/regulator/mt6323-regulator.txt | 237 ++++++++++ .../bindings/regulator/mt6358-regulator.txt | 350 +++++++++++++++ .../bindings/regulator/mt6359-regulator.yaml | 385 ++++++++++++++++ .../bindings/regulator/mt6360-regulator.yaml | 107 +++++ .../bindings/regulator/mt6380-regulator.txt | 89 ++++ .../bindings/regulator/mt6397-regulator.txt | 220 +++++++++ .../regulator/nvidia,tegra-regulators-coupling.txt | 65 +++ .../bindings/regulator/nxp,pca9450-regulator.yaml | 195 ++++++++ .../bindings/regulator/nxp,pf8x00-regulator.yaml | 190 ++++++++ .../bindings/regulator/onnn,fan53880.yaml | 85 ++++ .../devicetree/bindings/regulator/palmas-pmic.txt | 89 ++++ .../bindings/regulator/pbias-regulator.txt | 32 ++ .../devicetree/bindings/regulator/pfuze100.yaml | 199 +++++++++ .../devicetree/bindings/regulator/pv88060.txt | 124 +++++ .../devicetree/bindings/regulator/pv88080.txt | 62 +++ .../devicetree/bindings/regulator/pv88090.txt | 65 +++ .../bindings/regulator/pwm-regulator.yaml | 127 ++++++ .../bindings/regulator/qcom,rpm-regulator.yaml | 128 ++++++ .../bindings/regulator/qcom,rpmh-regulator.yaml | 497 +++++++++++++++++++++ .../regulator/qcom,sdm845-refgen-regulator.yaml | 57 +++ .../bindings/regulator/qcom,smd-rpm-regulator.yaml | 141 ++++++ .../bindings/regulator/qcom,spmi-regulator.yaml | 354 +++++++++++++++ .../regulator/qcom,usb-vbus-regulator.yaml | 49 ++ .../bindings/regulator/qcom-labibb-regulator.yaml | 101 +++++ ...pberrypi,7inch-touchscreen-panel-regulator.yaml | 44 ++ .../bindings/regulator/regulator-max77620.txt | 222 +++++++++ .../bindings/regulator/regulator-output.yaml | 39 ++ .../devicetree/bindings/regulator/regulator.txt | 1 + .../devicetree/bindings/regulator/regulator.yaml | 291 ++++++++++++ .../bindings/regulator/renesas,raa215300.yaml | 85 ++++ .../regulator/richtek,rt4801-regulator.yaml | 89 ++++ .../bindings/regulator/richtek,rt4803.yaml | 68 +++ .../regulator/richtek,rt4831-regulator.yaml | 36 ++ .../regulator/richtek,rt5190a-regulator.yaml | 141 ++++++ .../bindings/regulator/richtek,rt5739.yaml | 73 +++ .../regulator/richtek,rt5759-regulator.yaml | 90 ++++ .../regulator/richtek,rt6160-regulator.yaml | 61 +++ .../bindings/regulator/richtek,rt6190.yaml | 79 ++++ .../regulator/richtek,rt6245-regulator.yaml | 88 ++++ .../regulator/richtek,rtmv20-regulator.yaml | 160 +++++++ .../regulator/richtek,rtq2134-regulator.yaml | 106 +++++ .../bindings/regulator/richtek,rtq2208.yaml | 197 ++++++++ .../regulator/richtek,rtq6752-regulator.yaml | 77 ++++ .../bindings/regulator/rohm,bd71815-regulator.yaml | 117 +++++ .../bindings/regulator/rohm,bd71828-regulator.yaml | 105 +++++ .../bindings/regulator/rohm,bd71837-regulator.yaml | 161 +++++++ .../bindings/regulator/rohm,bd71847-regulator.yaml | 156 +++++++ .../bindings/regulator/rohm,bd9576-regulator.yaml | 40 ++ .../bindings/regulator/samsung,s2mpa01.yaml | 62 +++ .../bindings/regulator/samsung,s2mps11.yaml | 44 ++ .../bindings/regulator/samsung,s2mps13.yaml | 44 ++ .../bindings/regulator/samsung,s2mps14.yaml | 61 +++ .../bindings/regulator/samsung,s2mps15.yaml | 44 ++ .../bindings/regulator/samsung,s2mpu02.yaml | 44 ++ .../bindings/regulator/samsung,s5m8767.yaml | 100 +++++ .../bindings/regulator/silergy,sy8106a.yaml | 52 +++ .../bindings/regulator/silergy,sy8824x.yaml | 45 ++ .../bindings/regulator/silergy,sy8827n.yaml | 47 ++ .../regulator/siliconmitus,sm5703-regulator.yaml | 49 ++ .../bindings/regulator/sky81452-regulator.txt | 18 + .../regulator/socionext,uniphier-regulator.yaml | 99 ++++ .../bindings/regulator/sprd,sc2731-regulator.txt | 43 ++ .../bindings/regulator/st,stm32-booster.yaml | 47 ++ .../bindings/regulator/st,stm32-vrefbuf.yaml | 53 +++ .../bindings/regulator/st,stm32mp1-pwr-reg.yaml | 63 +++ .../devicetree/bindings/regulator/ti,tps62360.yaml | 98 ++++ .../devicetree/bindings/regulator/ti,tps62864.yaml | 63 +++ .../devicetree/bindings/regulator/ti,tps62870.yaml | 52 +++ .../devicetree/bindings/regulator/ti,tps65219.yaml | 173 +++++++ .../bindings/regulator/ti-abb-regulator.txt | 132 ++++++ .../bindings/regulator/tps51632-regulator.txt | 27 ++ .../devicetree/bindings/regulator/tps65023.txt | 60 +++ .../devicetree/bindings/regulator/tps65090.txt | 126 ++++++ .../bindings/regulator/tps65132-regulator.txt | 46 ++ .../devicetree/bindings/regulator/tps65217.txt | 78 ++++ .../devicetree/bindings/regulator/tps65218.txt | 83 ++++ .../devicetree/bindings/regulator/tps6586x.txt | 135 ++++++ .../bindings/regulator/twl-regulator.txt | 80 ++++ .../devicetree/bindings/regulator/vctrl.txt | 49 ++ .../devicetree/bindings/regulator/vexpress.txt | 32 ++ .../regulator/vqmmc-ipq4019-regulator.yaml | 43 ++ .../devicetree/bindings/regulator/wlf,arizona.yaml | 41 ++ 137 files changed, 14345 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/88pg86x.txt create mode 100644 Documentation/devicetree/bindings/regulator/88pm800.txt create mode 100644 Documentation/devicetree/bindings/regulator/88pm860x.txt create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml create mode 100644 Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/adi,max77857.yaml create mode 100644 Documentation/devicetree/bindings/regulator/anatop-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/as3722-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml create mode 100644 Documentation/devicetree/bindings/regulator/cpcap-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/da9210.txt create mode 100644 Documentation/devicetree/bindings/regulator/da9211.txt create mode 100644 Documentation/devicetree/bindings/regulator/dlg,da9121.yaml create mode 100644 Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml create mode 100644 Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml create mode 100644 Documentation/devicetree/bindings/regulator/fixed-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/gpio-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/isl9305.txt create mode 100644 Documentation/devicetree/bindings/regulator/lm363x-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/lp872x.txt create mode 100644 Documentation/devicetree/bindings/regulator/ltc3589.txt create mode 100644 Documentation/devicetree/bindings/regulator/ltc3676.txt create mode 100644 Documentation/devicetree/bindings/regulator/max1586-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/max77650-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/max8660.yaml create mode 100644 Documentation/devicetree/bindings/regulator/max8893.yaml create mode 100644 Documentation/devicetree/bindings/regulator/max8907.txt create mode 100644 Documentation/devicetree/bindings/regulator/max8925-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max14577.yaml create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max20086.yaml create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max20411.yaml create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77686.yaml create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77693.yaml create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77802.yaml create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77826.yaml create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77843.yaml create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max8952.yaml create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max8973.yaml create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max8997.yaml create mode 100644 Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/mp8859.txt create mode 100644 Documentation/devicetree/bindings/regulator/mps,mp5416.yaml create mode 100644 Documentation/devicetree/bindings/regulator/mps,mp886x.yaml create mode 100644 Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml create mode 100644 Documentation/devicetree/bindings/regulator/mps,mpq7932.yaml create mode 100644 Documentation/devicetree/bindings/regulator/mt6311-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/mt6358-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/mt6380-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/mt6397-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/nvidia,tegra-regulators-coupling.txt create mode 100644 Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml create mode 100644 Documentation/devicetree/bindings/regulator/palmas-pmic.txt create mode 100644 Documentation/devicetree/bindings/regulator/pbias-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/pfuze100.yaml create mode 100644 Documentation/devicetree/bindings/regulator/pv88060.txt create mode 100644 Documentation/devicetree/bindings/regulator/pv88080.txt create mode 100644 Documentation/devicetree/bindings/regulator/pv88090.txt create mode 100644 Documentation/devicetree/bindings/regulator/pwm-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/regulator-max77620.txt create mode 100644 Documentation/devicetree/bindings/regulator/regulator-output.yaml create mode 100644 Documentation/devicetree/bindings/regulator/regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt4803.yaml create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt5759-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rtq2134-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml create mode 100644 Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml create mode 100644 Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml create mode 100644 Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml create mode 100644 Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/sky81452-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml create mode 100644 Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml create mode 100644 Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml create mode 100644 Documentation/devicetree/bindings/regulator/ti,tps62360.yaml create mode 100644 Documentation/devicetree/bindings/regulator/ti,tps62864.yaml create mode 100644 Documentation/devicetree/bindings/regulator/ti,tps62870.yaml create mode 100644 Documentation/devicetree/bindings/regulator/ti,tps65219.yaml create mode 100644 Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/tps51632-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/tps65023.txt create mode 100644 Documentation/devicetree/bindings/regulator/tps65090.txt create mode 100644 Documentation/devicetree/bindings/regulator/tps65132-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/tps65217.txt create mode 100644 Documentation/devicetree/bindings/regulator/tps65218.txt create mode 100644 Documentation/devicetree/bindings/regulator/tps6586x.txt create mode 100644 Documentation/devicetree/bindings/regulator/twl-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/vctrl.txt create mode 100644 Documentation/devicetree/bindings/regulator/vexpress.txt create mode 100644 Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/wlf,arizona.yaml (limited to 'Documentation/devicetree/bindings/regulator') diff --git a/Documentation/devicetree/bindings/regulator/88pg86x.txt b/Documentation/devicetree/bindings/regulator/88pg86x.txt new file mode 100644 index 0000000000..13b7f49a2e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/88pg86x.txt @@ -0,0 +1,22 @@ +Marvell 88PG867/88PG868 voltage regulators + +Required properties: +- compatible: one of "marvell,88pg867", "marvell,88pg868"; +- reg: I2C slave address. + +Optional subnodes for regulators: "buck1", "buck2", using common regulator +bindings given in . + +Example: + + pg868@19 { + compatible = "marvell,88pg868"; + reg = <0x19>; + + vcpu: buck1 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1350000>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/88pm800.txt b/Documentation/devicetree/bindings/regulator/88pm800.txt new file mode 100644 index 0000000000..e8a54c2a58 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/88pm800.txt @@ -0,0 +1,38 @@ +Marvell 88PM800 regulator + +Required properties: +- compatible: "marvell,88pm800" +- reg: I2C slave address +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name (or the deprecated + regulator-compatible property if present), with valid values listed below. + The content of each sub-node is defined by the standard binding for + regulators; see regulator.txt. + +The valid names for regulators are: + + buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, + ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19 + +Example: + + pmic: 88pm800@31 { + compatible = "marvell,88pm800"; + reg = <0x31>; + + regulators { + buck1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3950000>; + regulator-boot-on; + regulator-always-on; + }; + ldo1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <15000000>; + regulator-boot-on; + regulator-always-on; + }; +... + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/88pm860x.txt b/Documentation/devicetree/bindings/regulator/88pm860x.txt new file mode 100644 index 0000000000..1267b3e1a2 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/88pm860x.txt @@ -0,0 +1,30 @@ +Marvell 88PM860x regulator + +Required properties: +- compatible: "marvell,88pm860x" +- reg: I2C slave address +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the regulator-compatible + property, with valid values listed below. + +Example: + + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml new file mode 100644 index 0000000000..b8ca967bc8 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/active-semi,act8600.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Active-semi ACT8600 regulator + +maintainers: + - Paul Cercueil + +properties: + compatible: + const: active-semi,act8600 + + reg: + maxItems: 1 + + system-power-controller: + description: + Indicates that the ACT8600 is responsible for powering OFF + the system. + type: boolean + + active-semi,vsel-high: + description: + Indicates the VSEL pin is high. If this property is missing, + the VSEL pin is assumed to be low. + type: boolean + + regulators: + type: object + additionalProperties: false + + properties: + DCDC1: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp1-supply: + description: Handle to the VP1 input supply + + DCDC2: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp2-supply: + description: Handle to the VP2 input supply + + DCDC3: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp3-supply: + description: Handle to the VP3 input supply + + patternProperties: + "^(SUDCDC_REG4|LDO_REG9|LDO_REG10)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + "^LDO[5-8]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + inl-supply: + description: Handle to the INL input supply + +additionalProperties: false + +required: + - reg + - compatible + - regulators + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@5a { + compatible = "active-semi,act8600"; + reg = <0x5a>; + + regulators { + SUDCDC_REG4 { + regulator-min-microvolt = <5300000>; + regulator-max-microvolt = <5300000>; + inl-supply = <&vcc>; + }; + + LDO5 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + inl-supply = <&vcc>; + }; + + LDO6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + inl-supply = <&vcc>; + }; + + LDO7 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + inl-supply = <&vcc>; + }; + + LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + inl-supply = <&vcc>; + }; + + LDO_REG9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + inl-supply = <&vcc>; + }; + + LDO_REG10 { + inl-supply = <&vcc>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml new file mode 100644 index 0000000000..02f45b5834 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/active-semi,act8846.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Active-semi ACT8846 regulator + +maintainers: + - Paul Cercueil + +properties: + compatible: + const: active-semi,act8846 + + reg: + maxItems: 1 + + system-power-controller: + description: + Indicates that the ACT8846 is responsible for powering OFF + the system. + type: boolean + + active-semi,vsel-high: + description: + Indicates the VSEL pin is high. If this property is missing, + the VSEL pin is assumed to be low. + type: boolean + + inl1-supply: + description: Handle to the INL1 input supply (REG5-7) + + inl2-supply: + description: Handle to the INL2 input supply (REG8-9) + + inl3-supply: + description: Handle to the INL3 input supply (REG10-12) + + vp1-supply: + description: Handle to the VP1 input supply (REG1) + + vp2-supply: + description: Handle to the VP2 input supply (REG2) + + vp3-supply: + description: Handle to the VP3 input supply (REG3) + + vp4-supply: + description: Handle to the VP4 input supply (REG4) + + regulators: + type: object + additionalProperties: false + + patternProperties: + "^REG([1-9]|1[0-2])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +additionalProperties: false + +required: + - reg + - compatible + - regulators + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + + system-power-controller; + + regulators { + REG1 { + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + REG2 { + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + REG3 { + regulator-name = "VDD_LOG"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + REG4 { + regulator-name = "VCC_20"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + REG5 { + regulator-name = "VCCIO_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + REG6 { + regulator-name = "VDD10_LCD"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + REG7 { + regulator-name = "VCC_WL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + REG8 { + regulator-name = "VCCA_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + REG9 { + regulator-name = "VCC_LAN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + REG10 { + regulator-name = "VDD_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + REG11 { + regulator-name = "VCC_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + REG12 { + regulator-name = "VCC18_LCD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml new file mode 100644 index 0000000000..afe1abc2d7 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/active-semi,act8865.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Active-semi ACT8865 regulator + +maintainers: + - Paul Cercueil + +properties: + compatible: + const: active-semi,act8865 + + reg: + maxItems: 1 + + system-power-controller: + description: + Indicates that the ACT8865 is responsible for powering OFF + the system. + type: boolean + + active-semi,vsel-high: + description: + Indicates the VSEL pin is high. If this property is missing, + the VSEL pin is assumed to be low. + type: boolean + + regulators: + type: object + additionalProperties: false + + properties: + DCDC_REG1: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp1-supply: + description: Handle to the VP1 input supply + + DCDC_REG2: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp2-supply: + description: Handle to the VP2 input supply + + DCDC_REG3: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp3-supply: + description: Handle to the VP3 input supply + + patternProperties: + "^LDO_REG[1-2]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + inl45-supply: + description: Handle to the INL45 input supply + + "^LDO_REG[3-4]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + inl67-supply: + description: Handle to the INL67 input supply + +additionalProperties: false + +required: + - reg + - compatible + - regulators + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + active-semi,vsel-high; + + regulators { + DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt = <1150000>; + regulator-suspend-max-microvolt = <1150000>; + regulator-changeable-in-suspend; + regulator-mode = ; + }; + }; + + DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + LDO_REG1 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO_REG2 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml new file mode 100644 index 0000000000..bdf3f7d34e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml @@ -0,0 +1,258 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/active-semi,act8945a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Active-semi ACT8945a regulator + +maintainers: + - Paul Cercueil + +properties: + compatible: + const: active-semi,act8945a + + reg: + maxItems: 1 + + system-power-controller: + description: + Indicates that the ACT8945a is responsible for powering OFF + the system. + type: boolean + + active-semi,vsel-high: + description: + Indicates the VSEL pin is high. If this property is missing, + the VSEL pin is assumed to be low. + type: boolean + + regulators: + type: object + additionalProperties: false + + properties: + REG_DCDC1: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp1-supply: + description: Handle to the VP1 input supply + + REG_DCDC2: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp2-supply: + description: Handle to the VP2 input supply + + REG_DCDC3: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp3-supply: + description: Handle to the VP3 input supply + + patternProperties: + "^REG_LDO[1-2]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + inl45-supply: + description: Handle to the INL45 input supply + + "^REG_LDO[3-4]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + inl67-supply: + description: Handle to the INL67 input supply + + charger: + type: object + additionalProperties: false + + properties: + compatible: + const: active-semi,act8945a-charger + + interrupts: + maxItems: 1 + + active-semi,chglev-gpios: + description: CGHLEV GPIO + maxItems: 1 + + active-semi,lbo-gpios: + description: LBO GPIO + maxItems: 1 + + active-semi,input-voltage-threshold-microvolt: + description: Input voltage threshold + maxItems: 1 + + active-semi,precondition-timeout: + description: Precondition timeout + $ref: /schemas/types.yaml#/definitions/uint32 + + active-semi,total-timeout: + description: Total timeout + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - compatible + - interrupts + +additionalProperties: false + +required: + - reg + - compatible + - regulators + +examples: + - | + #include + #include + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@5b { + compatible = "active-semi,act8945a"; + reg = <0x5b>; + active-semi,vsel-high; + + regulators { + REG_DCDC1 { + regulator-name = "VDD_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt = <1400000>; + regulator-suspend-max-microvolt = <1400000>; + regulator-changeable-in-suspend; + regulator-mode = ; + }; + }; + + REG_DCDC2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + REG_DCDC3 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + REG_LDO1 { + regulator-name = "VDD_FUSE"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + REG_LDO2 { + regulator-name = "VDD_3V3_LP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + REG_LDO3 { + regulator-name = "VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + REG_LDO4 { + regulator-name = "VDD_SDHC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + charger { + compatible = "active-semi,act8945a-charger"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; + interrupt-parent = <&pioA>; + interrupts = <45 IRQ_TYPE_EDGE_RISING>; + + active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>; + active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>; + active-semi,input-voltage-threshold-microvolt = <6600>; + active-semi,precondition-timeout = <40>; + active-semi,total-timeout = <3>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml b/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml new file mode 100644 index 0000000000..9e36d5467b --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/adi,max77541-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Buck Converter for MAX77540/MAX77541 + +maintainers: + - Okan Sahin + +description: | + This is a part of device tree bindings for ADI MAX77540/MAX77541 + + The buck converter is represented as a sub-node of the PMIC node on the device tree. + + The device has two buck regulators. + See also Documentation/devicetree/bindings/mfd/adi,max77541.yaml for + additional information and example. + +patternProperties: + "^buck[12]$": + type: object + $ref: regulator.yaml# + additionalProperties: false + description: | + Buck regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + regulator-min-microvolt: + minimum: 300000 + regulator-max-microvolt: + maximum: 5200000 + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/adi,max77857.yaml b/Documentation/devicetree/bindings/regulator/adi,max77857.yaml new file mode 100644 index 0000000000..d1fa74aca7 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/adi,max77857.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2022 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/adi,max77857.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX77857 Buck-Boost Converter + +maintainers: + - Ibrahim Tilki + - Okan Sahin + +description: Analog Devices MAX77857 Buck-Boost Converter + +properties: + compatible: + enum: + - adi,max77831 + - adi,max77857 + - adi,max77859 + - adi,max77859a + + reg: + description: I2C address of the device + items: + - enum: [0x66, 0x67, 0x6E, 0x6F] + + interrupts: + maxItems: 1 + + adi,switch-frequency-hz: + description: Switching frequency of the Buck-Boost converter in Hz. + items: + - enum: [1200000, 1500000, 1800000, 2100000] + + adi,rtop-ohms: + description: Top feedback resistor value in ohms for external feedback. + minimum: 150000 + maximum: 330000 + + adi,rbot-ohms: + description: Bottom feedback resistor value in ohms for external feedback. + +dependencies: + adi,rtop-ohms: [ 'adi,rbot-ohms' ] + adi,rbot-ohms: [ 'adi,rtop-ohms' ] + +required: + - compatible + - reg + +allOf: + - $ref: regulator.yaml# + - if: + properties: + compatible: + contains: + enum: + - adi,max77831 + + then: + properties: + adi,switch-frequency-hz: + items: + enum: [1200000, 1500000, 1800000] + +unevaluatedProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@66 { + reg = <0x66>; + compatible = "adi,max77857"; + interrupt-parent = <&gpio>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + + adi,rtop-ohms = <312000>; + adi,rbot-ohms = <12000>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml new file mode 100644 index 0000000000..1725037854 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/anatop-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Anatop Voltage Regulators + +maintainers: + - Ying-Chun Liu (PaulLiu) + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + const: fsl,anatop-regulator + + regulator-name: true + + anatop-reg-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: u32 value representing the anatop MFD register offset. + + anatop-vol-bit-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + description: u32 value representing the bit shift for the register. + + anatop-vol-bit-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: u32 value representing the number of bits used in the register. + + anatop-min-bit-val: + $ref: /schemas/types.yaml#/definitions/uint32 + description: u32 value representing the minimum value of this register. + + anatop-min-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: u32 value representing the minimum voltage of this regulator. + + anatop-max-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: u32 value representing the maximum voltage of this regulator. + + anatop-delay-reg-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: u32 value representing the anatop MFD step time register offset. + + anatop-delay-bit-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + description: u32 value representing the bit shift for the step time register. + + anatop-delay-bit-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: u32 value representing the number of bits used in the step time register. + + anatop-enable-bit: + $ref: /schemas/types.yaml#/definitions/uint32 + description: u32 value representing regulator enable bit offset. + + vin-supply: + description: input supply phandle. + +required: + - compatible + - regulator-name + - anatop-reg-offset + - anatop-vol-bit-shift + - anatop-vol-bit-width + - anatop-min-bit-val + - anatop-min-voltage + - anatop-max-voltage + +unevaluatedProperties: false + +examples: + - | + regulator-vddpu { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1300000>; + }; diff --git a/Documentation/devicetree/bindings/regulator/as3722-regulator.txt b/Documentation/devicetree/bindings/regulator/as3722-regulator.txt new file mode 100644 index 0000000000..caad0c8a25 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/as3722-regulator.txt @@ -0,0 +1,91 @@ +Regulator of AMS AS3722 PMIC. +Name of the regulator subnode must be "regulators". + +Optional properties: +-------------------- +The input supply of regulators are the optional properties on the +regulator node. The AS3722 is having 7 DCDC step-down regulators as +sd[0-6], 10 LDOs as ldo[0-7], ldo[9-11]. The input supply of these +regulators are provided through following properties: +vsup-sd2-supply: Input supply for SD2. +vsup-sd3-supply: Input supply for SD3. +vsup-sd4-supply: Input supply for SD4. +vsup-sd5-supply: Input supply for SD5. +vin-ldo0-supply: Input supply for LDO0. +vin-ldo1-6-supply: Input supply for LDO1 and LDO6. +vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7. +vin-ldo3-4-supply: Input supply for LDO3 and LDO4. +vin-ldo9-10-supply: Input supply for LDO9 and LDO10. +vin-ldo11-supply: Input supply for LDO11. + +Optional nodes: +-------------- +- regulators : Must contain a sub-node per regulator from the list below. + Each sub-node should contain the constraints and initialization + information for that regulator. See regulator.txt for a + description of standard properties for these sub-nodes. + Additional custom properties are listed below. + sd[0-6], ldo[0-7], ldo[9-11]. + + Optional sub-node properties: + ---------------------------- + ams,ext-control: External control of the rail. The option of + this properties will tell which external input is + controlling this rail. Valid values are 0, 1, 2 ad 3. + 0: There is no external control of this rail. + 1: Rail is controlled by ENABLE1 input pin. + 2: Rail is controlled by ENABLE2 input pin. + 3: Rail is controlled by ENABLE3 input pin. + ams,enable-tracking: Enable tracking with SD1, only supported + by LDO3. + +Example: +------- + ams3722: ams3722 { + compatible = "ams,as3722"; + reg = <0x40>; + ... + + regulators { + vsup-sd2-supply = <...>; + ... + + sd0 { + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + ams,ext-control = <2>; + }; + + sd1 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + ams,ext-control = <1>; + }; + + sd2 { + regulator-name = "vddio_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + sd4 { + regulator-name = "avdd-hdmi-pex"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + sd5 { + regulator-name = "vdd-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + .... + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml b/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml new file mode 100644 index 0000000000..c92a881ed6 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/awinic,aw37503.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic AW37503 Voltage Regulator + +maintainers: + - Alec Li + +description: + The AW37503 are dual voltage regulator, designed to support positive/negative + supply for driving TFT-LCD panels. It support software-configurable output + switching and monitoring. The output voltages can be programmed via an I2C + compatible interface. + +properties: + compatible: + const: awinic,aw37503 + + reg: + maxItems: 1 + +patternProperties: + "^out[pn]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single regulator. + + properties: + enable-gpios: + maxItems: 1 + description: + GPIO specifier to enable the GPIO control (on/off) for regulator. + + required: + - regulator-name + +required: + - compatible + - reg + - outp + - outn + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@3e { + compatible = "awinic,aw37503"; + reg = <0x3e>; + + outp { + regulator-name = "outp"; + regulator-boot-on; + regulator-always-on; + enable-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + + outn { + regulator-name = "outn"; + regulator-boot-on; + regulator-always-on; + enable-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + }; + }; + }; +... + diff --git a/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt new file mode 100644 index 0000000000..36f5e2f5cc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt @@ -0,0 +1,35 @@ +Motorola CPCAP PMIC voltage regulators +------------------------------------ + +Requires node properties: +- "compatible" value one of: + "motorola,cpcap-regulator" + "motorola,mapphone-cpcap-regulator" + "motorola,xoom-cpcap-regulator" + +Required regulator properties: +- "regulator-name" +- "regulator-enable-ramp-delay" +- "regulator-min-microvolt" +- "regulator-max-microvolt" + +Optional regulator properties: +- "regulator-boot-on" + +See Documentation/devicetree/bindings/regulator/regulator.txt +for more details about the regulator properties. + +Example: + +cpcap_regulator: regulator { + compatible = "motorola,cpcap-regulator"; + + cpcap_regulators: regulators { + sw5: SW5 { + regulator-min-microvolt = <5050000>; + regulator-max-microvolt = <5050000>; + regulator-enable-ramp-delay = <50000>; + regulator-boot-on; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/da9210.txt b/Documentation/devicetree/bindings/regulator/da9210.txt new file mode 100644 index 0000000000..58065ca9e3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/da9210.txt @@ -0,0 +1,29 @@ +* Dialog Semiconductor DA9210 Multi-phase 12A DCDC BUCK Converter + +Required properties: + +- compatible: must be "dlg,da9210" +- reg: the i2c slave address of the regulator. It should be 0x68. + +Optional properties: + +- interrupts: a reference to the DA9210 interrupt, if available. + +Any standard regulator properties can be used to configure the single da9210 +DCDC. + +Example: + + da9210@68 { + compatible = "dlg,da9210"; + reg = <0x68>; + + interrupt-parent = <...>; + interrupts = <...>; + + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <1600000>; + regulator-max-microamp = <4600000>; + regulator-boot-on; + }; diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt new file mode 100644 index 0000000000..eb871447d5 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/da9211.txt @@ -0,0 +1,205 @@ +* Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 + Voltage Regulator + +Required properties: +- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9223" + or "dlg,da9214" or "dlg,da9224" or "dlg,da9215" or "dlg,da9225" +- reg: I2C slave address, usually 0x68. +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + BUCKA and BUCKB. + +Optional properties: +- enable-gpios: platform gpio for control of BUCKA/BUCKB. +- Any optional property defined in regulator.txt + - regulator-initial-mode and regulator-allowed-modes may be specified using + mode values from dt-bindings/regulator/dlg,da9211-regulator.h + +Example 1) DA9211 + pmic: da9211@68 { + compatible = "dlg,da9211"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <5000000>; + enable-gpios = <&gpio 27 0>; + regulator-allowed-modes = ; + }; + }; + }; + +Example 2) DA9212 + pmic: da9212@68 { + compatible = "dlg,da9212"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <5000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <5000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; + +Example 3) DA9213 + pmic: da9213@68 { + compatible = "dlg,da9213"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 27 0>; + }; + }; + }; + +Example 4) DA9223 + pmic: da9223@68 { + compatible = "dlg,da9223"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 27 0>; + }; + }; + }; + +Example 5) DA9214 + pmic: da9214@68 { + compatible = "dlg,da9214"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; + +Example 6) DA9224 + pmic: da9224@68 { + compatible = "dlg,da9224"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; + +Example 7) DA9215 + pmic: da9215@68 { + compatible = "dlg,da9215"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <4000000>; + regulator-max-microamp = <7000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <4000000>; + regulator-max-microamp = <7000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; + +Example 8) DA9225 + pmic: da9225@68 { + compatible = "dlg,da9225"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <4000000>; + regulator-max-microamp = <7000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <4000000>; + regulator-max-microamp = <7000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml new file mode 100644 index 0000000000..13b3f75f8e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml @@ -0,0 +1,213 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/dlg,da9121.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor DA9121 voltage regulator + +maintainers: + - Adam Ward + +description: | + Dialog Semiconductor DA9121 Single-channel 10A double-phase buck converter + Dialog Semiconductor DA9122 Double-channel 5A single-phase buck converter + Dialog Semiconductor DA9220 Double-channel 3A single-phase buck converter + Dialog Semiconductor DA9217 Single-channel 6A double-phase buck converter + Dialog Semiconductor DA9130 Single-channel 10A double-phase buck converter + Dialog Semiconductor DA9131 Double-channel 5A single-phase buck converter + Dialog Semiconductor DA9132 Double-channel 3A single-phase buck converter + Dialog Semiconductor DA9141 Single-channel 40A quad-phase buck converter + Dialog Semiconductor DA9142 Single-channel 20A double-phase buck converter + + Device parameter ranges + + The current limits can be set to at/near double the rated current per channel + to allow for transient peaks. + Current limit changes when the output is enabled are not supported, as a + precaution against undefined behaviour. + + |----------------------------------------------| + | | range & reset default value | + | Device |------------------------------| + | | microvolt | microamp | + |----------------------------------------------| + | DA9121/DA9130 | Min: 300000 | Min: 7000000 | + | | Max: 1900000 | Max: 20000000 | + |----------------------------------------------| + | DA9121/DA9131 | Min: 300000 | Min: 3500000 | + | | Max: 1900000 | Max: 10000000 | + |----------------------------------------------| + | DA9121/DA9131 | Min: 300000 | Min: 3500000 | + | | Max: 1900000 | Max: 6000000 | + |----------------------------------------------| + | DA9217 | Min: 300000 | Min: 7000000 | + | | Max: 1900000 | Max: 12000000 | + |----------------------------------------------| + | DA9141 | Min: 300000 | Min: 26000000 | + | | Max: 1300000 | Max: 78000000 | + |----------------------------------------------| + | DA9142 | Min: 300000 | Min: 13000000 | + | | Max: 1300000 | Max: 39000000 | + |----------------------------------------------| + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - dlg,da9121 + - dlg,da9122 + - dlg,da9220 + - dlg,da9217 + - dlg,da9130 + - dlg,da9131 + - dlg,da9132 + - dlg,da9141 + - dlg,da9142 + + reg: + maxItems: 1 + description: Specifies the I2C slave address. + + interrupts: + maxItems: 1 + description: IRQ line information. + + dlg,irq-polling-delay-passive-ms: + minimum: 1000 + maximum: 10000 + description: | + Specify the polling period, measured in milliseconds, between interrupt status + update checks. Range 1000-10000 ms. + + regulators: + type: object + additionalProperties: false + description: | + List of regulators provided by the device + + patternProperties: + "^buck([1-2])$": + type: object + $ref: regulator.yaml# + description: | + Properties for a single BUCK regulator + + properties: + regulator-initial-mode: + enum: [ 0, 1, 2, 3 ] + description: Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h + + enable-gpios: + maxItems: 1 + description: Specify a valid GPIO for platform control of the regulator + + dlg,ripple-cancel: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h + Only present on multi-channel devices (DA9122, DA9220, DA9131, DA9132) + + unevaluatedProperties: false + +required: + - compatible + - reg + - regulators + +allOf: + - if: + properties: + compatible: + not: + contains: + enum: + - dlg,da9122 + - dlg,da9131 + - dlg,da9132 + - dlg,da9220 + then: + properties: + regulators: + properties: + buck2: false + +additionalProperties: false + +examples: + - | + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@68 { + compatible = "dlg,da9121"; + reg = <0x68>; + + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + + dlg,irq-polling-delay-passive-ms = <2000>; + + regulators { + DA9121_BUCK1: buck1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1900000>; + regulator-min-microamp = <7000000>; + regulator-max-microamp = <20000000>; + regulator-boot-on; + regulator-initial-mode = ; + enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + }; + }; + }; + + - | + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@68 { + compatible = "dlg,da9122"; + reg = <0x68>; + + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + + dlg,irq-polling-delay-passive-ms = <2000>; + + regulators { + DA9122_BUCK1: buck1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1900000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <10000000>; + regulator-boot-on; + regulator-initial-mode = ; + enable-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>; + dlg,ripple-cancel = ; + }; + DA9122_BUCK2: buck2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1900000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <10000000>; + regulator-boot-on; + regulator-initial-mode = ; + enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; + dlg,ripple-cancel = ; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml b/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml new file mode 100644 index 0000000000..bad140418e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/dlg,slg51000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor SLG51000 Voltage Regulator + +maintainers: + - Eric Jeong + - Support Opensource + +properties: + compatible: + const: dlg,slg51000 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dlg,cs-gpios: + maxItems: 1 + description: + GPIO for chip select + + vin3-supply: + description: + Input supply for ldo3, required if regulator is enabled + + vin4-supply: + description: + Input supply for ldo4, required if regulator is enabled + + vin5-supply: + description: + Input supply for ldo5, required if regulator is enabled + + vin6-supply: + description: + Input supply for ldo6, required if regulator is enabled + + vin7-supply: + description: + Input supply for ldo7, required if regulator is enabled + + regulators: + type: object + additionalProperties: false + + patternProperties: + "^ldo[1-7]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + enable-gpios: + maxItems: 1 + + required: + - regulator-name + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@75 { + compatible = "dlg,slg51000"; + reg = <0x75>; + dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; + vin5-supply = <&vreg_s1f_1p2>; + vin6-supply = <&vreg_s1f_1p2>; + + regulators { + ldo1 { + regulator-name = "slg51000_b_ldo1"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2 { + regulator-name = "slg51000_b_ldo2"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3 { + regulator-name = "slg51000_b_ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + ldo4 { + regulator-name = "slg51000_b_ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + ldo5 { + regulator-name = "slg51000_b_ldo5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + ldo6 { + regulator-name = "slg51000_b_ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7 { + regulator-name = "slg51000_b_ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml b/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml new file mode 100644 index 0000000000..69bae90fc4 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/fcs,fan53555.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fairchild FAN53555 regulators + +maintainers: + - Heiko Stuebner + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + oneOf: + - enum: + - fcs,fan53555 + - fcs,fan53526 + - rockchip,rk8600 + - rockchip,rk8602 + - silergy,syr827 + - silergy,syr828 + - tcs,tcs4525 + - items: + - const: rockchip,rk8601 + - const: rockchip,rk8600 + - items: + - const: rockchip,rk8603 + - const: rockchip,rk8602 + + reg: + maxItems: 1 + + fcs,suspend-voltage-selector: + description: Declares which of the two available voltage selector + registers should be used for the suspend voltage. The other one is used + for the runtime voltage setting. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + + vin-supply: + description: Supply for the vin pin + + vsel-gpios: + description: Voltage Select. When this pin is LOW, VOUT is set by the + VSEL0 register. When this pin is HIGH, VOUT is set by the VSEL1 register. + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@40 { + compatible = "fcs,fan53555"; + reg = <0x40>; + regulator-name = "fan53555"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&parent_reg>; + fcs,suspend-voltage-selector = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml new file mode 100644 index 0000000000..ac0281b1cc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fixed Voltage regulators + +maintainers: + - Liam Girdwood + - Mark Brown + +description: + Any property defined as part of the core regulator binding, defined in + regulator.yaml, can also be used. However a fixed voltage regulator is + expected to have the regulator-min-microvolt and regulator-max-microvolt + to be the same. + +allOf: + - $ref: regulator.yaml# + - if: + properties: + compatible: + contains: + const: regulator-fixed-clock + then: + required: + - clocks + - if: + properties: + compatible: + contains: + const: regulator-fixed-domain + then: + required: + - power-domains + - required-opps + - not: + required: + - gpio + - gpios + +properties: + compatible: + enum: + - regulator-fixed + - regulator-fixed-clock + - regulator-fixed-domain + + regulator-name: true + + gpio: + description: gpio to use for enable control + maxItems: 1 + + gpios: + maxItems: 1 + + clocks: + description: + clock to use for enable control. This binding is only available if + the compatible is chosen to regulator-fixed-clock. The clock binding + is mandatory if compatible is chosen to regulator-fixed-clock. + maxItems: 1 + + power-domains: + deprecated: true + description: + Power domain to use for enable control. This binding is only + available if the compatible is chosen to regulator-fixed-domain. + maxItems: 1 + + required-opps: + deprecated: true + description: + Performance state to use for enable control. This binding is only + available if the compatible is chosen to regulator-fixed-domain. The + power-domain binding is mandatory if compatible is chosen to + regulator-fixed-domain. + maxItems: 1 + + startup-delay-us: + description: startup time in microseconds + + off-on-delay-us: + description: off delay time in microseconds + + enable-active-high: + description: + Polarity of GPIO is Active high. If this property is missing, + the default assumed is Active low. + type: boolean + + gpio-open-drain: + description: + GPIO is open drain type. If this property is missing then default + assumption is false. + type: boolean + + vin-supply: + description: Input supply phandle. + +required: + - compatible + - regulator-name + +unevaluatedProperties: false + +examples: + - | + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 16 0>; + startup-delay-us = <70000>; + enable-active-high; + regulator-boot-on; + gpio-open-drain; + vin-supply = <&parent_reg>; + }; + reg_1v8_clk: regulator-1v8-clk { + compatible = "regulator-fixed-clock"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + clocks = <&clock1>; + startup-delay-us = <70000>; + enable-active-high; + regulator-boot-on; + vin-supply = <&parent_reg>; + }; + reg_1v8_domain: regulator-1v8-domain { + compatible = "regulator-fixed-domain"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + power-domains = <&domain1>; + required-opps = <&domain1_state1>; + startup-delay-us = <70000>; + enable-active-high; + regulator-boot-on; + vin-supply = <&parent_reg>; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml new file mode 100644 index 0000000000..5a6491a81f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/google,cros-ec-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS EC controlled voltage regulators + +maintainers: + - Pi-Hsun Shih + +description: + Any property defined as part of the core regulator binding, defined in + regulator.yaml, can also be used. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + const: google,cros-ec-regulator + + reg: + maxItems: 1 + description: Identifier for the voltage regulator to ChromeOS EC. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <99 0>; + + regulator@0 { + compatible = "google,cros-ec-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + reg = <0>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml new file mode 100644 index 0000000000..f4c1f36e52 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/gpio-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO controlled regulators + +maintainers: + - Liam Girdwood + - Mark Brown + +description: + Any property defined as part of the core regulator binding, defined in + regulator.txt, can also be used. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + const: regulator-gpio + + regulator-name: true + + enable-gpios: + description: GPIO to use to enable/disable the regulator. + Warning, the GPIO phandle flags are ignored and the GPIO polarity is + controlled solely by the presence of "enable-active-high" DT property. + This is due to compatibility with old DTs. + maxItems: 1 + + gpios: + description: Array of one or more GPIO pins used to select the regulator + voltage/current listed in "states". + minItems: 1 + maxItems: 8 # Should be enough... + + gpios-states: + description: | + On operating systems, that don't support reading back gpio values in + output mode (most notably linux), this array provides the state of GPIO + pins set when requesting them from the gpio controller. Systems, that are + capable of preserving state when requesting the lines, are free to ignore + this property. + 0: LOW + 1: HIGH + Default is LOW if nothing else is specified. + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 8 + items: + enum: [0, 1] + default: 0 + + states: + description: Selection of available voltages/currents provided by this + regulator and matching GPIO configurations to achieve them. If there are + no states in the "states" array, use a fixed regulator instead. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + maxItems: 8 + items: + items: + - description: Voltage in microvolts + - description: GPIO group state value + + startup-delay-us: + description: startup time in microseconds + + enable-active-high: + description: Polarity of "enable-gpio" GPIO is active HIGH. Default is + active LOW. + type: boolean + + gpio-open-drain: + description: + GPIO is open drain type. If this property is missing then default + assumption is false. + type: boolean + + regulator-type: + description: Specifies what is being regulated. + $ref: /schemas/types.yaml#/definitions/string + enum: + - voltage + - current + default: voltage + + vin-supply: + description: Input supply phandle. + +required: + - compatible + - regulator-name + - gpios + - states + +unevaluatedProperties: false + +examples: + - | + gpio-regulator { + compatible = "regulator-gpio"; + + regulator-name = "mmci-gpio-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + regulator-boot-on; + + enable-gpios = <&gpio0 23 0x4>; + gpios = <&gpio0 24 0x4 + &gpio0 25 0x4>; + states = <1800000 0x3>, + <2200000 0x2>, + <2600000 0x1>, + <2900000 0x0>; + + startup-delay-us = <100000>; + enable-active-high; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt b/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt new file mode 100644 index 0000000000..14cfdc5641 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt @@ -0,0 +1,29 @@ +Hisilicon Hi655x Voltage regulators + +Note: +The Hi655x regulator control is managed by Hi655x PMIC. +So the node of this regulator must be child node of Hi655x +PMIC node. + +The driver uses the regulator core framework, so please also +take the bindings of regulator.txt for reference. + +The valid names for regulators are: + +LDO2_2V8 LDO7_SDIO LDO10_2V85 LDO13_1V8 LDO14_2V8 +LDO15_1V8 LDO17_2V5 LDO19_3V0 LDO21_1V8 LDO22_1V2 + +Example: + pmic: pmic@f8000000 { + compatible = "hisilicon,hi655x-pmic"; + ... + regulators { + ldo2: LDO2@a21 { + regulator-name = "LDO2_2V8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + ... + } + } diff --git a/Documentation/devicetree/bindings/regulator/isl9305.txt b/Documentation/devicetree/bindings/regulator/isl9305.txt new file mode 100644 index 0000000000..d6e7c9ec94 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/isl9305.txt @@ -0,0 +1,36 @@ +Intersil ISL9305/ISL9305H voltage regulator + +Required properties: + +- compatible: "isil,isl9305" or "isil,isl9305h" +- reg: I2C slave address, usually 0x68. +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values being "dcd1", "dcd2", "ldo1" and "ldo2". The content of each sub-node + is defined by the standard binding for regulators; see regulator.txt. +- VINDCD1-supply: A phandle to a regulator node supplying VINDCD1. + VINDCD2-supply: A phandle to a regulator node supplying VINDCD2. + VINLDO1-supply: A phandle to a regulator node supplying VINLDO1. + VINLDO2-supply: A phandle to a regulator node supplying VINLDO2. + +Optional properties: +- Per-regulator optional properties are defined in regulator.txt + +Example + + pmic: isl9305@68 { + compatible = "isil,isl9305"; + reg = <0x68>; + + VINDCD1-supply = <&system_power>; + VINDCD2-supply = <&system_power>; + VINLDO1-supply = <&system_power>; + VINLDO2-supply = <&system_power>; + + regulators { + dcd1 { + regulator-name = "VDD_DSP"; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt b/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt new file mode 100644 index 0000000000..cc5a6151d8 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt @@ -0,0 +1,108 @@ +TI LMU LM363x regulator device tree bindings + +LM363x regulator driver supports LM3631 and LM3632. +LM3631 has five regulators and LM3632 supports three regulators. + +Required property: + - compatible: "ti,lm363x-regulator" + +Optional properties: + LM3632 has external enable pins for two LDOs. + - enable-gpios: Two GPIO specifiers for Vpos and Vneg control pins. + The first entry is Vpos, the second is Vneg enable pin. + +Child nodes: + LM3631 + - vboost + - vcont + - voref + - vpos + - vneg + + LM3632 + - vboost + - vpos + - vneg + + Optional properties of a child node: + Each sub-node should contain the constraints and initialization. + Please refer to [1]. + +Examples: Please refer to ti-lmu dt-bindings [2]. + +lm3631@29 { + compatible = "ti,lm3631"; + reg = <0x29>; + + regulators { + compatible = "ti,lm363x-regulator"; + + vboost { + regulator-name = "lcd_boost"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <6350000>; + regulator-always-on; + }; + + vcont { + regulator-name = "lcd_vcont"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + voref { + regulator-name = "lcd_voref"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + }; + + vpos { + regulator-name = "lcd_vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + + vneg { + regulator-name = "lcd_vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + }; +}; + +lm3632@11 { + compatible = "ti,lm3632"; + reg = <0x11>; + + regulators { + compatible = "ti,lm363x-regulator"; + + /* GPIO1_16 for Vpos, GPIO1_28 is for Vneg */ + enable-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>, + <&gpio1 28 GPIO_ACTIVE_HIGH>; + + vboost { + regulator-name = "lcd_boost"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <6400000>; + regulator-always-on; + }; + + vpos { + regulator-name = "lcd_vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + }; + + vneg { + regulator-name = "lcd_vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + }; + }; +}; + +[1] ../regulator/regulator.txt +[2] ../mfd/ti-lmu.txt diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt new file mode 100644 index 0000000000..ab895cd1ca --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/lp872x.txt @@ -0,0 +1,161 @@ +Binding for TI/National Semiconductor LP872x Driver + +Required properties: + - compatible: "ti,lp8720" or "ti,lp8725" + - reg: I2C slave address. 0x7d = LP8720, 0x7a = LP8725 + +Optional properties: + - ti,general-config: the value of LP872X_GENERAL_CFG register (u8) + (LP8720) + bit[2]: BUCK output voltage control by external DVS pin or register + 1 = external pin, 0 = bit7 of register 08h + bit[1]: sleep control by external DVS pin or register + 1 = external pin, 0 = bit6 of register 08h + bit[0]: time step unit(usec). 1 = 25, 0 = 50 + + (LP8725) + bit[7:6]: time step unit(usec). 00 = 32, 01 = 64, 10 = 128, 11 = 256 + bit[4]: BUCK2 enable control. 1 = enable, 0 = disable + bit[3]: BUCK2 output voltage register address. 1 = 0Ah, 0 = 0Bh + bit[2]: BUCK1 output voltage control by external DVS pin or register + 1 = register 08h, 0 = DVS + bit[1]: LDO sleep control. 1 = sleep mode, 0 = normal + bit[0]: BUCK1 enable control, 1 = enable, 0 = disable + + For more details, please see the datasheet. + + - ti,update-config: define it when LP872X_GENERAL_CFG register should be set + - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices. + - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2. + - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH. + - enable-gpios: GPIO specifier for EN pin control of LP872x devices. + + Sub nodes for regulator_init_data + LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck) + LP8725 has maximum 9 nodes. (child name: ldo1 ~ 5, lilo1,2 and buck1,2) + For more details, please see the following binding document. + (Documentation/devicetree/bindings/regulator/regulator.txt) + +Datasheet + - LP8720: https://www.ti.com/lit/ds/symlink/lp8720.pdf + - LP8725: https://www.ti.com/lit/ds/symlink/lp8725.pdf + +Example 1) LP8720 + +lp8720@7d { + compatible = "ti,lp8720"; + reg = <0x7d>; + + /* external DVS pin used, timestep is 25usec */ + ti,general-config = /bits/ 8 <0x03>; + ti,update-config; + + /* + * The dvs-gpio depends on the processor environment. + * For example, following GPIO specifier means GPIO134 in OMAP4. + */ + ti,dvs-gpio = <&gpio5 6 0>; + ti,dvs-vsel = /bits/ 8 <1>; /* SEL_V2 */ + ti,dvs-state = /bits/ 8 <1>; /* DVS_HIGH */ + + vaf: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vmmc: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vcam_io: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + vcam_core: ldo4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2850000>; + regulator-boot-on; + }; + + vcam: ldo5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vcc: buck { + regulator-name = "VBUCK"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2300000>; + }; +}; + +Example 2) LP8725 + +lp8725@7a { + compatible = "ti,lp8725"; + reg = <0x7a>; + + /* Enable BUCK1,2, no DVS, normal LDO mode, timestep is 256usec */ + ti,general-config = /bits/ 8 <0xdd>; + ti,update-config; + + vcam_io: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vcam_core: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vcam: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vcmmb_io: ldo4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + vcmmb_core: ldo5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + vaux1: lilo1 { + regulator-name = "VAUX1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + vaux2: lilo2 { + regulator-name = "VAUX2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + vcc1: buck1 { + regulator-name = "VBUCK1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3000000>; + regulator-min-microamp = <460000>; + regulator-max-microamp = <1370000>; + regulator-boot-on; + }; + + vcc2: buck2 { + regulator-name = "VBUCK2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3000000>; + regulator-min-microamp = <460000>; + regulator-max-microamp = <1370000>; + regulator-boot-on; + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/ltc3589.txt b/Documentation/devicetree/bindings/regulator/ltc3589.txt new file mode 100644 index 0000000000..8010530361 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ltc3589.txt @@ -0,0 +1,99 @@ +Linear Technology LTC3589, LTC3589-1, and LTC3589-2 8-output regulators + +Required properties: +- compatible: "lltc,ltc3589", "lltc,ltc3589-1" or "lltc,ltc3589-2" +- reg: I2C slave address + +Required child node: +- regulators: Contains eight regulator child nodes sw1, sw2, sw3, bb-out, + ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as + documented in Documentation/devicetree/bindings/regulator/regulator.txt. + +Each regulator is defined using the standard binding for regulators. The +nodes for sw1, sw2, sw3, bb-out, ldo1, and ldo2 additionally need to specify +the resistor values of their external feedback voltage dividers: + +Required properties (not on ldo3, ldo4): +- lltc,fb-voltage-divider: An array of two integers containing the resistor + values R1 and R2 of the feedback voltage divider in ohms. + +Regulators sw1, sw2, sw3, and ldo2 can regulate the feedback reference from +0.3625 V to 0.75 V in 12.5 mV steps. The output voltage thus ranges between +0.3625 * (1 + R1/R2) V and 0.75 * (1 + R1/R2) V. Regulators bb-out and ldo1 +have a fixed 0.8 V reference and thus output 0.8 * (1 + R1/R2) V. The ldo3 +regulator is fixed to 1.8 V on LTC3589 and to 2.8 V on LTC3589-1,2. The ldo4 +regulator can output between 1.8 V and 3.3 V on LTC3589 and between 1.2 V +and 3.2 V on LTC3589-1,2 in four steps. The ldo1 standby regulator can not +be disabled and thus should have the regulator-always-on property set. + +Example: + + ltc3589: pmic@34 { + compatible = "lltc,ltc3589-1"; + reg = <0x34>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <591930>; + regulator-max-microvolt = <1224671>; + lltc,fb-voltage-divider = <100000 158000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <704123>; + regulator-max-microvolt = <1456803>; + lltc,fb-voltage-divider = <180000 191000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1341250>; + regulator-max-microvolt = <2775000>; + lltc,fb-voltage-divider = <270000 100000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + bb_out_reg: bb-out { + regulator-min-microvolt = <3387341>; + regulator-max-microvolt = <3387341>; + lltc,fb-voltage-divider = <511000 158000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = <1306329>; + regulator-max-microvolt = <1306329>; + lltc,fb-voltage-divider = <100000 158000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <704123>; + regulator-max-microvolt = <1456806>; + lltc,fb-voltage-divider = <180000 191000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3200000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/ltc3676.txt b/Documentation/devicetree/bindings/regulator/ltc3676.txt new file mode 100644 index 0000000000..d4eb366ce1 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ltc3676.txt @@ -0,0 +1,94 @@ +Linear Technology LTC3676 8-output regulators + +Required properties: +- compatible: "lltc,ltc3676" +- reg: I2C slave address + +Required child node: +- regulators: Contains eight regulator child nodes sw1, sw2, sw3, sw4, + ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as + documented in Documentation/devicetree/bindings/regulator/regulator.txt. + +Each regulator is defined using the standard binding for regulators. The +nodes for sw1, sw2, sw3, sw4, ldo1, ldo2 and ldo4 additionally need to specify +the resistor values of their external feedback voltage dividers: + +Required properties (not on ldo3): +- lltc,fb-voltage-divider: An array of two integers containing the resistor + values R1 and R2 of the feedback voltage divider in ohms. + +Regulators sw1, sw2, sw3, sw4 can regulate the feedback reference from: +412.5mV to 800mV in 12.5 mV steps. The output voltage thus ranges between +0.4125 * (1 + R1/R2) V and 0.8 * (1 + R1/R2) V. + +Regulators ldo1, ldo2, and ldo4 have a fixed 0.725 V reference and thus output +0.725 * (1 + R1/R2) V. The ldo3 regulator is fixed to 1.8 V. The ldo1 standby +regulator can not be disabled and thus should have the regulator-always-on +property set. + +Example: + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <200400>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <130800>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <168400>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/max1586-regulator.txt b/Documentation/devicetree/bindings/regulator/max1586-regulator.txt new file mode 100644 index 0000000000..c050c1744c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max1586-regulator.txt @@ -0,0 +1,28 @@ +Maxim MAX1586 voltage regulator + +Required properties: +- compatible: must be "maxim,max1586" +- reg: I2C slave address, usually 0x14 +- v3-gain: integer specifying the V3 gain as per datasheet + (1 + R24/R25 + R24/185.5kOhm) +- any required generic properties defined in regulator.txt + +Example: + + i2c_master { + max1586@14 { + compatible = "maxim,max1586"; + reg = <0x14>; + v3-gain = <1000000>; + + regulators { + vcc_core: v3 { + regulator-name = "vcc_core"; + regulator-compatible = "Output_V3"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1705000>; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml new file mode 100644 index 0000000000..27d5e9c2bb --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/max77650-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator driver for MAX77650 PMIC from Maxim Integrated. + +maintainers: + - Bartosz Golaszewski + +description: | + This module is part of the MAX77650 MFD device. For more details + see Documentation/devicetree/bindings/mfd/max77650.yaml. + + The regulator controller is represented as a sub-node of the PMIC node + on the device tree. + + The device has a single LDO regulator and a SIMO buck-boost regulator with + three independent power rails. + +properties: + compatible: + const: maxim,max77650-regulator + +patternProperties: + "^regulator-(ldo|sbb[0-2])$": + $ref: regulator.yaml# + unevaluatedProperties: false + +required: + - compatible +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/regulator/max8660.yaml b/Documentation/devicetree/bindings/regulator/max8660.yaml new file mode 100644 index 0000000000..f05f4644c8 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8660.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/max8660.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX8660 voltage regulator + +maintainers: + - Daniel Mack + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - maxim,max8660 + - maxim,max8661 + + reg: + maxItems: 1 + + regulators: + type: object + + patternProperties: + "^regulator-.+$": + $ref: regulator.yaml# + unevaluatedProperties: false + + additionalProperties: false + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "maxim,max8660"; + reg = <0x34>; + + regulators { + regulator-V3 { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator-V4 { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator-V5 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + }; + + regulator-V6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + regulator-V7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/max8893.yaml b/Documentation/devicetree/bindings/regulator/max8893.yaml new file mode 100644 index 0000000000..e40ee798e1 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8893.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/max8893.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator driver for MAX8893 PMIC from Maxim Integrated. + +maintainers: + - Sergey Larin + +description: | + The device has 5 LDO regulators and a single BUCK regulator. + Programming is done through I2C bus. + +properties: + compatible: + const: maxim,max8893 + + reg: + maxItems: 1 + + regulators: + type: object + + patternProperties: + "^(ldo[1-5]|buck)$": + $ref: regulator.yaml# + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - regulators + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@3e { + compatible = "maxim,max8893"; + reg = <0x3e>; + + regulators { + /* Front camera - s5k6aafx, back - m5mo */ + /* Numbers used to indicate the sequence */ + front_1_back_1: buck { + regulator-name = "cam_isp_core_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + front_4_back_5: ldo1 { + regulator-name = "vt_io_1v8,cam_isp_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + front_3_back_4: ldo2 { + regulator-name = "vt_core_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + front_5_back_6: ldo3 { + regulator-name = "vt_cam_1v8,vt_sensor_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo4 { + /* not used */ + }; + + back_7: ldo5 { + regulator-name = "cam_sensor_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt new file mode 100644 index 0000000000..371eccd1cd --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8907.txt @@ -0,0 +1,69 @@ +MAX8907 regulator + +Required properties: +- compatible: "maxim,max8907" +- reg: I2C slave address +- interrupts: The interrupt output of the controller +- mbatt-supply: The input supply for MBATT, BBAT, SDBY, VRTC. +- in-v1-supply: The input supply for SD1. +- in-v2-supply: The input supply for SD2. +- in-v3-supply: The input supply for SD3. +- in1-supply: The input supply for LDO1. +... +- in20-supply: The input supply for LDO20. +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name (or the deprecated + regulator-compatible property if present), with valid values listed below. + The content of each sub-node is defined by the standard binding for + regulators; see regulator.txt. + +Optional properties: +- maxim,system-power-controller: Boolean property indicating that the PMIC + controls the overall system power. + +The valid names for regulators are: + + sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10, + ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19, ldo20, out5v, + out33v, bbat, sdby, vrtc. + +Example: + + max8907@3c { + compatible = "maxim,max8907"; + reg = <0x3c>; + interrupts = <0 86 0x4>; + + maxim,system-power-controller; + + mbatt-supply = <&some_reg>; + in-v1-supply = <&mbatt_reg>; + ... + in1-supply = <&mbatt_reg>; + ... + + regulators { + mbatt_reg: mbatt { + regulator-name = "vbat_pmu"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + sd1 { + regulator-name = "nvvdd_sv1,vdd_cpu_pmu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sd2 { + regulator-name = "nvvdd_sv2,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; +... + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/max8925-regulator.txt b/Documentation/devicetree/bindings/regulator/max8925-regulator.txt new file mode 100644 index 0000000000..0057695aae --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8925-regulator.txt @@ -0,0 +1,40 @@ +Max8925 Voltage regulators + +Required nodes: +-nodes: + - SDV1 for SDV SDV1 + - SDV2 for SDV SDV2 + - SDV3 for SDV SDV3 + - LDO1 for LDO LDO1 + - LDO2 for LDO LDO2 + - LDO3 for LDO LDO3 + - LDO4 for LDO LDO4 + - LDO5 for LDO LDO5 + - LDO6 for LDO LDO6 + - LDO7 for LDO LDO7 + - LDO8 for LDO LDO8 + - LDO9 for LDO LDO9 + - LDO10 for LDO LDO10 + - LDO11 for LDO LDO11 + - LDO12 for LDO LDO12 + - LDO13 for LDO LDO13 + - LDO14 for LDO LDO14 + - LDO15 for LDO LDO15 + - LDO16 for LDO LDO16 + - LDO17 for LDO LDO17 + - LDO18 for LDO LDO18 + - LDO19 for LDO LDO19 + - LDO20 for LDO LDO20 + +Optional properties: +- Any optional property defined in bindings/regulator/regulator.txt + +Example: + + SDV1 { + regulator-min-microvolt = <637500>; + regulator-max-microvolt = <1425000>; + regulator-boot-on; + regulator-always-on; + }; + diff --git a/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml b/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml new file mode 100644 index 0000000000..285dc71229 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max14577.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB + Integrated Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for + additional information and example. + +properties: + compatible: + enum: + - maxim,max14577-regulator + - maxim,max77836-regulator + + CHARGER: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: | + Current regulator. + + properties: + regulator-min-microvolt: false + regulator-max-microvolt: false + + SAFEOUT: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: | + Safeout LDO regulator (fixed voltage). + + properties: + regulator-min-microamp: false + regulator-max-microamp: false + regulator-min-microvolt: + const: 4900000 + regulator-max-microvolt: + const: 4900000 + +patternProperties: + "^LDO[12]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: | + Current regulator. + + properties: + regulator-min-microamp: false + regulator-max-microamp: false + regulator-min-microvolt: + minimum: 800000 + regulator-max-microvolt: + maximum: 3950000 + +allOf: + - if: + properties: + compatible: + contains: + const: maxim,max14577-regulator + then: + properties: + LDO1: false + LDO2: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/maxim,max20086.yaml b/Documentation/devicetree/bindings/regulator/maxim,max20086.yaml new file mode 100644 index 0000000000..05f7239118 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max20086.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max20086.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX20086-MAX20089 Camera Power Protector + +maintainers: + - Laurent Pinchart + +description: | + The MAX20086-MAX20089 are dual/quad camera power protectors, designed to + deliver power over coax for radar and camera modules. They support + software-configurable output switching and monitoring. The output voltage and + current limit are fixed by the hardware design. + +properties: + compatible: + enum: + - maxim,max20086 + - maxim,max20087 + - maxim,max20088 + - maxim,max20089 + + reg: + maxItems: 1 + + enable-gpios: + maxItems: 1 + description: GPIO connected to the EN pin, active high + + in-supply: + description: Input supply for the camera outputs (IN pin, 3.0V to 15.0V) + + vdd-supply: + description: Input supply for the device (VDD pin, 3.0V to 5.5V) + + regulators: + type: object + + patternProperties: + "^OUT[1-4]$": + type: object + $ref: regulator.yaml# + + additionalProperties: false + +required: + - compatible + - reg + - in-supply + - vdd-supply + - regulators + +allOf: + - if: + properties: + compatible: + contains: + enum: + - maxim,max20088 + - maxim,max20089 + then: + properties: + regulators: + properties: + OUT3: false + OUT4: false + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@28 { + compatible = "maxim,max20087"; + reg = <0x28>; + + in-supply = <®_12v0>; + vdd-supply = <®_3v3>; + + enable-gpios = <&gpio 108 GPIO_ACTIVE_HIGH>; + + regulators { + OUT1 { + regulator-name = "VOUT1"; + }; + OUT2 { + regulator-name = "VOUT2"; + }; + OUT3 { + regulator-name = "VOUT3"; + }; + OUT4 { + regulator-name = "VOUT4"; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/maxim,max20411.yaml b/Documentation/devicetree/bindings/regulator/maxim,max20411.yaml new file mode 100644 index 0000000000..5b3a42d24e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max20411.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max20411.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX20411 Step-Down DC-DC Converter + +maintainers: + - Bjorn Andersson + +description: + The MAX20411 is a high-efficiency, DC-DC step-down converter. It provides + configurable output voltage in the range of 0.5V to 1.275V, configurable over + I2C. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + const: maxim,max20411 + + reg: + maxItems: 1 + + enable-gpios: + description: GPIO connected to the EN pin, active high + + vdd-supply: + description: Input supply for the device (VDD pin, 3.0V to 5.5V) + +required: + - compatible + - reg + - enable-gpios + +unevaluatedProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@39 { + compatible = "maxim,max20411"; + reg = <0x39>; + + enable-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml new file mode 100644 index 0000000000..0e7cd4b3ac --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77686.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77686 Power Management IC regulators + +maintainers: + - Chanwoo Choi + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77686 Power Management + Integrated Circuit (PMIC). + + The Maxim MAX77686 provides high-efficiency Buck and 26 Low-DropOut (LDO) + regulators. + + See also Documentation/devicetree/bindings/mfd/maxim,max77686.yaml for + additional information and example. + +patternProperties: + # 26 LDOs + "^LDO([1-9]|1[0-9]|2[3-6])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: | + Properties for single LDO regulator. + Regulators which can be turned off during system suspend: + LDO2, LDO6-8, LDO10-12, LDO14-16 + + required: + - regulator-name + + # LDO20-LDO22 with maxim,ena-gpios + "^LDO2[0-2]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: | + Properties for single LDO regulator. + + properties: + maxim,ena-gpios: + maxItems: 1 + description: | + GPIO specifier to enable the GPIO control (on/off) for regulator. + + required: + - regulator-name + + # 9 bucks + "^BUCK[1-7]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: | + Properties for single BUCK regulator. + Regulators which can be turned off during system suspend: + BUCK[1-4] + + required: + - regulator-name + + "^BUCK[89]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: | + Properties for single BUCK regulator. + + properties: + maxim,ena-gpios: + maxItems: 1 + description: | + GPIO specifier to enable the GPIO control (on/off) for regulator. + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml new file mode 100644 index 0000000000..945a539749 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC regulators + +maintainers: + - Chanwoo Choi + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated + Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for + additional information and example. + +properties: + CHARGER: + type: object + $ref: regulator.yaml# + additionalProperties: false + description: | + Current regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + regulator-min-microamp: + minimum: 60000 + regulator-max-microamp: + maximum: 2580000 + + required: + - regulator-name + +patternProperties: + "^ESAFEOUT[12]$": + type: object + $ref: regulator.yaml# + additionalProperties: false + description: | + Safeout LDO regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + regulator-min-microvolt: + minimum: 3300000 + regulator-max-microvolt: + maximum: 4950000 + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml new file mode 100644 index 0000000000..b704f05ea4 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77802.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77802 Power Management IC regulators + +maintainers: + - Javier Martinez Canillas + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77802 Power Management + Integrated Circuit (PMIC). + + The Maxim MAX77686 provides 10 high-efficiency Buck and 32 Low-DropOut (LDO) + regulators. + + See also Documentation/devicetree/bindings/mfd/maxim,max77802.yaml for + additional information and example. + + Certain regulators support "regulator-initial-mode" and "regulator-mode". + The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h + and their meaning is:: + 1 - Normal regulator voltage output mode. + 3 - Low Power which reduces the quiescent current down to only 1uA + + The standard "regulator-mode" property can only be used for regulators that + support changing their mode to Low Power Mode during suspend. These + regulators are:: bucks 2-4 and LDOs 1-35. Also, it only takes effect if the + regulator has been enabled for the given suspend state using + "regulator-on-in-suspend" and has not been disabled for that state using + "regulator-off-in-suspend". + +patternProperties: + # LDO1, LDO3, LDO20, LDO21 + "^LDO([13]|2[01])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + LDOs supporting the regulator-initial-mode property and changing their + mode during normal operation. + + # LDO2, LDO4-15, LDO17-19, LDO23-30, LDO32-35 + "^LDO([24-9]|1[0-5789]|2[3-9]|3[02345])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + LDOs supporting the regulator-mode property (changing mode to Low Power + Mode during suspend). + + properties: + regulator-initial-mode: false + + # buck2-4 + "^BUCK[2-4]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + bucks supporting the regulator-mode property (changing mode to Low Power + Mode during suspend). + + properties: + regulator-initial-mode: false + + # buck1, buck5-10 + "^BUCK([15-9]|10)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + + properties: + regulator-initial-mode: false + + patternProperties: + "^regulator-state-(standby|mem|disk)$": + type: object + additionalProperties: true + properties: + regulator-mode: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml new file mode 100644 index 0000000000..78c0b63243 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77826.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX77826 PMIC + +maintainers: + - Iskren Chernev + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - maxim,max77826 + + reg: + maxItems: 1 + + regulators: + type: object + $ref: regulator.yaml# + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST + + patternProperties: + "^LDO([1-9]|1[0-5])$": + type: object + $ref: regulator.yaml# + + "^BUCK|BUCKBOOST$": + type: object + $ref: regulator.yaml# + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "maxim,max77826"; + reg = <0x69>; + + regulators { + LDO2 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <3587500>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml new file mode 100644 index 0000000000..9695e72428 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77843.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77843 MicroUSB and Companion Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77843 MicroUSB Integrated + Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max77843.yaml for + additional information and example. + +properties: + compatible: + const: maxim,max77843-regulator + + CHARGER: + type: object + $ref: regulator.yaml# + additionalProperties: false + description: | + Current regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + regulator-min-microamp: + minimum: 100000 + regulator-max-microamp: + maximum: 3150000 + + required: + - regulator-name + +patternProperties: + "^SAFEOUT[12]$": + type: object + $ref: regulator.yaml# + additionalProperties: false + description: | + Safeout LDO regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + regulator-min-microvolt: + minimum: 3300000 + regulator-max-microvolt: + maximum: 4950000 + + required: + - regulator-name + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml new file mode 100644 index 0000000000..3ff0d7d980 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max8952.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX8952 voltage regulator + +maintainers: + - Krzysztof Kozlowski + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + const: maxim,max8952 + + max8952,default-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + index of default DVS voltage + + max8952,dvs-mode-microvolt: + minItems: 4 + maxItems: 4 + items: + minimum: 770000 + maximum: 1400000 + description: | + Array of 4 integer values defining DVS voltages in microvolts. All values + must be from range <770000, 1400000>. + + max8952,en-gpio: + maxItems: 1 + description: | + GPIO used to control enable status of regulator + + max8952,ramp-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 0 + description: | + Voltage ramp speed, values map to: + - 0: 32mV/us + - 1: 16mV/us + - 2: 8mV/us + - 3: 4mV/us + - 4: 2mV/us + - 5: 1mV/us + - 6: 0.5mV/us + - 7: 0.25mV/us + Defaults to 32mV/us if not specified. + + max8952,sync-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 0 + description: | + Sync frequency, values map to: + - 0: 26 MHz + - 1: 13 MHz + - 2: 19.2 MHz + Defaults to 26 MHz if not specified. + + max8952,vid-gpios: + minItems: 2 + maxItems: 2 + description: | + Array of two GPIO pins used for DVS voltage selection + + reg: + maxItems: 1 + +required: + - compatible + - max8952,dvs-mode-microvolt + - reg + +unevaluatedProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@60 { + compatible = "maxim,max8952"; + reg = <0x60>; + + max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>, + <&gpx0 4 GPIO_ACTIVE_HIGH>; + max8952,default-mode = <0>; + max8952,dvs-mode-microvolt = <1250000>, <1200000>, + <1050000>, <950000>; + max8952,sync-freq = <0>; + max8952,ramp-speed = <0>; + + regulator-name = "VARM_1.2V_C210"; + regulator-min-microvolt = <770000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml new file mode 100644 index 0000000000..b92eef68c1 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max8973.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX8973/MAX77621 voltage regulator + +maintainers: + - Krzysztof Kozlowski + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - maxim,max8973 + - maxim,max77621 + + junction-warn-millicelsius: + description: | + Junction warning temperature threshold in millicelsius. If die + temperature crosses this level then device generates the warning + interrupts. + Please note that thermal functionality is only supported on MAX77621. The + supported threshold warning temperature for MAX77621 are 120 degC and 140 + degC. + + maxim,dvs-gpio: + maxItems: 1 + description: | + GPIO which is connected to DVS pin of device. + + maxim,dvs-default-state: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Default state of GPIO during initialisation. + 1 for HIGH and 0 for LOW. + + maxim,externally-enable: + type: boolean + description: | + Externally control the regulator output enable/disable. + + maxim,enable-gpio: + maxItems: 1 + description: | + GPIO for enable control. If the valid GPIO is provided then externally + enable control will be considered. + + maxim,enable-remote-sense: + type: boolean + description: Enable remote sense. + + maxim,enable-falling-slew-rate: + type: boolean + description: Enable falling slew rate. + + maxim,enable-active-discharge: + type: boolean + description: Eable active discharge. + + maxim,enable-frequency-shift: + type: boolean + description: Enable 9% frequency shift. + + maxim,enable-bias-control: + type: boolean + description: | + Enable bias control which can reduce the startup delay to 20us from 220us. + + maxim,enable-etr: + type: boolean + description: Enable Enhanced Transient Response. + + maxim,enable-high-etr-sensitivity: + type: boolean + description: | + Enhanced transient response circuit is enabled and set for high + sensitivity. If this property is available then etr will be enable + default. + Enhanced transient response (ETR) will affect the configuration of CKADV. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@1b { + compatible = "maxim,max8973"; + reg = <0x1b>; + + regulator-min-microvolt = <935000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@1b { + compatible = "maxim,max77621"; + reg = <0x1b>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1231250>; + regulator-name = "PPVAR_CPU"; + regulator-ramp-delay = <12500>; + maxim,dvs-default-state = <1>; + maxim,enable-active-discharge; + maxim,enable-bias-control; + maxim,enable-etr; + maxim,enable-gpio = <&pmic 5 GPIO_ACTIVE_HIGH>; + maxim,externally-enable; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml new file mode 100644 index 0000000000..2b266ea437 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml @@ -0,0 +1,446 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max8997.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX8997 Power Management IC + +maintainers: + - Krzysztof Kozlowski + +description: | + The Maxim MAX8997 is a Power Management IC which includes voltage and current + regulators, charger controller with fuel gauge, RTC, clock outputs, haptic + motor driver, flash LED driver and Micro-USB Interface Controller. + + The binding here is not complete and describes only regulator and charger + controller parts. + +properties: + compatible: + const: maxim,max8997-pmic + + charger-supply: + description: | + Regulator node for charging current. + + interrupts: + items: + - description: irq1 interrupt + - description: alert interrupt + + max8997,pmic-buck1-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck1 when + changing voltage using GPIO DVS. + If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is + specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should + specify at least one voltage level (which would be a safe operating + voltage). + + max8997,pmic-buck2-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck2 when + changing voltage using GPIO DVS. + If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is + specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should + specify at least one voltage level (which would be a safe operating + voltage). + + max8997,pmic-buck5-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck5 when + changing voltage using GPIO DVS. + If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is + specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should + specify at least one voltage level (which would be a safe operating + voltage). + + max8997,pmic-buck1-uses-gpio-dvs: + type: boolean + description: | + buck1 can be controlled by GPIO DVS. + + max8997,pmic-buck2-uses-gpio-dvs: + type: boolean + description: | + buck2 can be controlled by GPIO DVS. + + max8997,pmic-buck5-uses-gpio-dvs: + type: boolean + description: | + buck5 can be controlled by GPIO DVS. + + max8997,pmic-buck125-default-dvs-idx: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + default: 0 + description: | + Default voltage setting selected from the possible 8 options selectable + by the dvs gpios. The value of this property should be between 0 and 7. + If not specified or if out of range, the default value of this property + is set to 0. + + max8997,pmic-buck125-dvs-gpios: + minItems: 3 + maxItems: 3 + description: | + GPIO specifiers for three host gpio's used for DVS. + + max8997,pmic-ignore-gpiodvs-side-effect: + type: boolean + description: | + When GPIO-DVS mode is used for multiple bucks, changing the voltage value + of one of the bucks may affect that of another buck, which is the side + effect of the change (set_voltage). Use this property to ignore such + side effects and change the voltage. + + reg: + maxItems: 1 + + regulators: + type: object + additionalProperties: false + description: + List of child nodes that specify the regulators. + + patternProperties: + # 1-18 and 21 LDOs + "^LDO([1-9]|1[0-8]|21)$": + type: object + $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + + # 7 bucks + "^BUCK[1-7]$": + type: object + $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + + "^EN32KHZ_[AC]P$": + type: object + $ref: regulator.yaml# + description: + 32768 Hz clock output (modelled as regulator) + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + + required: + - regulator-name + + additionalProperties: false + + properties: + CHARGER: + type: object + $ref: regulator.yaml# + description: main battery charger current control + + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + + CHARGER_CV: + type: object + $ref: regulator.yaml# + description: main battery charger voltage control + + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + + CHARGER_TOPOFF: + type: object + $ref: regulator.yaml# + description: end of charge current threshold level + + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + + ENVICHG: + type: object + $ref: regulator.yaml# + description: | + Battery Charging Current Monitor Output. This is a fixed voltage type + regulator + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + + ESAFEOUT1: + type: object + $ref: regulator.yaml# + description: LDO19 + + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + + ESAFEOUT2: + type: object + $ref: regulator.yaml# + description: LDO20 + + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + +required: + - compatible + - max8997,pmic-buck1-dvs-voltage + - max8997,pmic-buck2-dvs-voltage + - max8997,pmic-buck5-dvs-voltage + - reg + - regulators + +dependencies: + max8997,pmic-buck1-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ] + max8997,pmic-buck2-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ] + max8997,pmic-buck5-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ] + +additionalProperties: false + +if: + anyOf: + - required: + - max8997,pmic-buck1-uses-gpio-dvs + - required: + - max8997,pmic-buck2-uses-gpio-dvs + - required: + - max8997,pmic-buck5-uses-gpio-dvs +then: + properties: + max8997,pmic-buck1-dvs-voltage: + minItems: 8 + maxItems: 8 + max8997,pmic-buck2-dvs-voltage: + minItems: 8 + maxItems: 8 + max8997,pmic-buck5-dvs-voltage: + minItems: 8 + maxItems: 8 + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + + interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>, + <&gpx2 3 IRQ_TYPE_EDGE_FALLING>; + + max8997,pmic-buck1-uses-gpio-dvs; + max8997,pmic-buck2-uses-gpio-dvs; + max8997,pmic-buck5-uses-gpio-dvs; + + max8997,pmic-ignore-gpiodvs-side-effect; + max8997,pmic-buck125-default-dvs-idx = <0>; + + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>, + <&gpl0 0 GPIO_ACTIVE_HIGH>; + + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, + <950000>, <900000>, + <1100000>, <1000000>, + <950000>, <900000>; + + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>; + pinctrl-names = "default"; + + charger-supply = <&charger_reg>; + + regulators { + LDO1 { + regulator-name = "VADC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + LDO2 { + regulator-name = "VALIVE_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + BUCK1 { + regulator-name = "VARM_1.2V_C210"; + regulator-min-microvolt = <65000>; + regulator-max-microvolt = <2225000>; + regulator-always-on; + }; + + // ... + + BUCK7 { + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + }; + + ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + + EN32KHZ_AP { + regulator-name = "EN32KHZ_AP"; + regulator-always-on; + }; + + EN32KHZ_CP { + regulator-name = "EN32KHZ_CP"; + regulator-always-on; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <200000>; + regulator-max-microamp = <950000>; + }; + + CHARGER_CV { + regulator-name = "CHARGER_CV"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + CHARGER_TOPOFF { + regulator-name = "CHARGER_TOPOFF"; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-always-on; + }; + }; + }; + }; + + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>, + <3 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&max8997_irq>; + + max8997,pmic-buck1-dvs-voltage = <1350000>; + max8997,pmic-buck2-dvs-voltage = <1100000>; + max8997,pmic-buck5-dvs-voltage = <1200000>; + + regulators { + LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + // ... + + BUCK1 { + regulator-name = "VDD_ARM_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + // ... + + EN32KHZ_AP { + regulator-name = "EN32KHZ_AP"; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt new file mode 100644 index 0000000000..451cc4e86b --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt @@ -0,0 +1,144 @@ +MCP16502 PMIC + +Required properties: +- compatible: "microchip,mcp16502" +- reg: I2C slave address +- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during + suspend-to-ram, keeping the PMIC into HIBERNATE mode; this + property is optional; +- regulators: A node that houses a sub-node for each regulator within + the device. Each sub-node is identified using the node's + name. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + +Regulators of MCP16502 PMIC: +1) VDD_IO - Buck (1.2 - 3.7 V) +2) VDD_DDR - Buck (0.6 - 1.85 V) +3) VDD_CORE - Buck (0.6 - 1.85 V) +4) VDD_OTHER - BUCK (0.6 - 1.85 V) +5) LDO1 - LDO (1.2 - 3.7 V) +6) LDO2 - LDO (1.2 - 3.7 V) + +Regulator modes: +2 - FPWM: higher precision, higher consumption +4 - AutoPFM: lower precision, lower consumption + +Each regulator is defined using the standard binding for regulators. + +Example: + +mcp16502@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + status = "okay"; + lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>; + + regulators { + VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml new file mode 100644 index 0000000000..79e5198e1c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml @@ -0,0 +1,273 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6331-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6331 Regulator from MediaTek Integrated + +maintainers: + - AngeloGioacchino Del Regno + +description: | + The MT6331 PMIC provides 6 BUCK and 21 LDO (Low Dropout) regulators + and nodes are named according to the regulator type: + buck- and ldo-. + MT6331 regulators node should be sub node of the MT6397 MFD node. + +patternProperties: + "^buck-v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$" + + unevaluatedProperties: false + + "^ldo-v(avdd32aud|auxa32)$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^v(avdd32aud|auxa32)$" + + unevaluatedProperties: false + + "^ldo-v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$" + + unevaluatedProperties: false + + "^ldo-vcam(a|af|d|io)$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^vcam(a|af|d|io)$" + + unevaluatedProperties: false + + "^ldo-vtcxo[12]$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^vtcxo[12]$" + + required: + - regulator-name + + unevaluatedProperties: false + + "^ldo-vgp[1234]$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^vgp[12]$" + + required: + - regulator-name + + unevaluatedProperties: false + +additionalProperties: false + +examples: + - | + pmic { + regulators { + mt6331_vdvfs11_reg: buck-vdvfs11 { + regulator-name = "vdvfs11"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <1>; + regulator-allowed-modes = <0 1>; + }; + mt6331_vdvfs12_reg: buck-vdvfs12 { + regulator-name = "vdvfs12"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <1>; + regulator-allowed-modes = <0 1>; + }; + mt6331_vdvfs13_reg: buck-vdvfs13 { + regulator-name = "vdvfs13"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <1>; + regulator-allowed-modes = <0 1>; + }; + mt6331_vdvfs14_reg: buck-vdvfs14 { + regulator-name = "vdvfs14"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <1>; + regulator-allowed-modes = <0 1>; + }; + mt6331_vcore2_reg: buck-vcore2 { + regulator-name = "vcore2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <1>; + regulator-allowed-modes = <0 1>; + }; + mt6331_vio18_reg: buck-vio18 { + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-allowed-modes = <0 1>; + }; + mt6331_vtcxo1_reg: ldo-vtcxo1 { + regulator-name = "vtcxo1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + mt6331_vtcxo2_reg: ldo-vtcxo2 { + regulator-name = "vtcxo2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + mt6331_avdd32_aud_reg: ldo-avdd32aud { + regulator-name = "avdd32_aud"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3200000>; + }; + mt6331_vauxa32_reg: ldo-vauxa32 { + regulator-name = "vauxa32"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3200000>; + }; + mt6331_vcama_reg: ldo-vcama { + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + mt6331_vio28_reg: ldo-vio28 { + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + mt6331_vcamaf_reg: ldo-vcamaf { + regulator-name = "vcam_af"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + mt6331_vmc_reg: ldo-vmc { + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + mt6331_vmch_reg: ldo-vmch { + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + mt6331_vemc33_reg: ldo-vemc33 { + regulator-name = "vemc33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + mt6331_vgp1_reg: ldo-vgp1 { + regulator-name = "vgp1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + mt6331_vsim1_reg: ldo-vsim1 { + regulator-name = "vsim1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + }; + mt6331_vsim2_reg: ldo-vsim2 { + regulator-name = "vsim2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + }; + mt6331_vmipi_reg: ldo-vmipi { + regulator-name = "vmipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + mt6331_vibr_reg: ldo-vibr { + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + mt6331_vgp4_reg: ldo-vgp4 { + regulator-name = "vgp4"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <2200000>; + }; + mt6331_vcamd_reg: ldo-vcamd { + regulator-name = "vcamd"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1500000>; + }; + mt6331_vusb10_reg: ldo-vusb10 { + regulator-name = "vusb"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + }; + mt6331_vcamio_reg: ldo-vcamio { + regulator-name = "vcam_io"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + }; + mt6331_vsram_reg: ldo-vsram { + regulator-name = "vsram"; + regulator-min-microvolt = <1012500>; + regulator-max-microvolt = <1012500>; + regulator-always-on; + regulator-boot-on; + }; + mt6331_vgp2_reg: ldo-vgp2 { + regulator-name = "vgp2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + }; + mt6331_vgp3_reg: ldo-vgp3 { + regulator-name = "vgp3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + }; + mt6331_vrtc_reg: ldo-vrtc { + regulator-name = "vrtc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + mt6331_vdig18_reg: ldo-vdig18 { + regulator-name = "dvdd18_dig"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml new file mode 100644 index 0000000000..2eb512c29a --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6332-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6332 Regulator from MediaTek Integrated + +maintainers: + - AngeloGioacchino Del Regno + +description: | + The MT6332 Companion PMIC provides 6 BUCK and 4 LDO (Low Dropout) + regulators and nodes are named according to the regulator type: + buck- and ldo-. + MT6332 regulators node should be sub node of the MT6397 MFD node. + +patternProperties: + "^buck-v(dram|dvfs2|pa|rf18a|rf18b|sbst)$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^v(dram|dvfs2|pa|rf18a|rf18b|sbst)$" + + unevaluatedProperties: false + + "^ldo-v(bif28|dig18|sram|usb33)$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^v(bif28|dig18|sram|usb33)$" + + unevaluatedProperties: false + +additionalProperties: false + +examples: + - | + pmic { + regulators { + mt6332_vdram_reg: buck-vdram { + regulator-name = "vdram"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + mt6332_vdvfs2_reg: buck-vdvfs2 { + regulator-name = "vdvfs2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <1>; + regulator-allowed-modes = <0 1>; + }; + mt6332_vpa_reg: buck-vpa { + regulator-name = "vpa"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + mt6332_vrf18a_reg: buck-vrf18a { + regulator-name = "vrf18a"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <2240625>; + regulator-allowed-modes = <0 1>; + }; + mt6332_vrf18b_reg: buck-vrf18b { + regulator-name = "vrf18b"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <2240625>; + regulator-allowed-modes = <0 1>; + }; + mt6332_vsbst_reg: buck-vsbst { + regulator-name = "vsbst"; + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <7468750>; + }; + mt6332_vauxb32_reg: ldo-vauxb32 { + regulator-name = "vauxb32"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3200000>; + }; + mt6332_vbif28_reg: ldo-vbif28 { + regulator-name = "vbif28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + mt6332_vdig18_reg: ldo-vdig18 { + regulator-name = "vdig18"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + mt6332_vsram_reg: ldo-vsram { + regulator-name = "vauxa32"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-always-on; + }; + mt6332_vusb33_reg: ldo-vusb33 { + regulator-name = "vusb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml new file mode 100644 index 0000000000..6327bb2f6e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml @@ -0,0 +1,294 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6357-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6357 Regulators + +maintainers: + - Chen Zhong + - Fabien Parent + - Alexandre Mergnat + +description: | + The MT6357 PMIC provides 5 BUCK and 29 LDO. + Regulators and nodes are named according to the regulator type: + - buck- + - ldo-. + MT6357 regulators node should be sub node of the MT6397 MFD node. + +patternProperties: + "^buck-v(core|modem|pa|proc|s1)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + required: + - regulator-name + - regulator-min-microvolt + - regulator-max-microvolt + + "^ldo-v(camio18|aud28|aux18|io18|io28|rf12|rf18|cn18|cn28|fe28)$": + type: object + $ref: fixed-regulator.yaml# + unevaluatedProperties: false + description: + Properties for single fixed LDO regulator. + + required: + - regulator-name + - regulator-min-microvolt + - regulator-max-microvolt + + "^ldo-v(efuse|ibr|ldo28|mch|cama|camd|cn33-bt|cn33-wifi)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + - regulator-min-microvolt + - regulator-max-microvolt + + "^ldo-v(xo22|emc|mc|sim1|sim2|sram-others|sram-proc|dram|usb33)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + - regulator-min-microvolt + - regulator-max-microvolt + +additionalProperties: false + +examples: + - | + pmic { + regulators { + mt6357_vproc_reg: buck-vproc { + regulator-name = "vproc"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <220>; + regulator-always-on; + }; + mt6357_vcore_reg: buck-vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <220>; + regulator-always-on; + }; + mt6357_vmodem_reg: buck-vmodem { + regulator-name = "vmodem"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <220>; + }; + mt6357_vs1_reg: buck-vs1 { + regulator-name = "vs1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2200000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <220>; + regulator-always-on; + }; + mt6357_vpa_reg: buck-vpa { + regulator-name = "vpa"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3650000>; + regulator-ramp-delay = <50000>; + regulator-enable-ramp-delay = <220>; + }; + mt6357_vfe28_reg: ldo-vfe28 { + compatible = "regulator-fixed"; + regulator-name = "vfe28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vxo22_reg: ldo-vxo22 { + regulator-name = "vxo22"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2400000>; + regulator-enable-ramp-delay = <110>; + }; + mt6357_vrf18_reg: ldo-vrf18 { + compatible = "regulator-fixed"; + regulator-name = "vrf18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <110>; + }; + mt6357_vrf12_reg: ldo-vrf12 { + compatible = "regulator-fixed"; + regulator-name = "vrf12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <110>; + }; + mt6357_vefuse_reg: ldo-vefuse { + regulator-name = "vefuse"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vcn33_bt_reg: ldo-vcn33-bt { + regulator-name = "vcn33-bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3500000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vcn33_wifi_reg: ldo-vcn33-wifi { + regulator-name = "vcn33-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3500000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vcn28_reg: ldo-vcn28 { + compatible = "regulator-fixed"; + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vcn18_reg: ldo-vcn18 { + compatible = "regulator-fixed"; + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vcama_reg: ldo-vcama { + regulator-name = "vcama"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vcamd_reg: ldo-vcamd { + regulator-name = "vcamd"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vcamio_reg: ldo-vcamio18 { + compatible = "regulator-fixed"; + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vldo28_reg: ldo-vldo28 { + regulator-name = "vldo28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vsram_others_reg: ldo-vsram-others { + regulator-name = "vsram-others"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <110>; + regulator-always-on; + }; + mt6357_vsram_proc_reg: ldo-vsram-proc { + regulator-name = "vsram-proc"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <110>; + regulator-always-on; + }; + mt6357_vaux18_reg: ldo-vaux18 { + compatible = "regulator-fixed"; + regulator-name = "vaux18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vaud28_reg: ldo-vaud28 { + compatible = "regulator-fixed"; + regulator-name = "vaud28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vio28_reg: ldo-vio28 { + compatible = "regulator-fixed"; + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vio18_reg: ldo-vio18 { + compatible = "regulator-fixed"; + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + }; + mt6357_vdram_reg: ldo-vdram { + regulator-name = "vdram"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <3300>; + }; + mt6357_vmc_reg: ldo-vmc { + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + }; + mt6357_vmch_reg: ldo-vmch { + regulator-name = "vmch"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + }; + mt6357_vemc_reg: ldo-vemc { + regulator-name = "vemc"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + regulator-always-on; + }; + mt6357_vsim1_reg: ldo-vsim1 { + regulator-name = "vsim1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vsim2_reg: ldo-vsim2 { + regulator-name = "vsim2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vibr_reg: ldo-vibr { + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + }; + mt6357_vusb33_reg: ldo-vusb33 { + regulator-name = "vusb33"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <264>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mp8859.txt b/Documentation/devicetree/bindings/regulator/mp8859.txt new file mode 100644 index 0000000000..74ad697309 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mp8859.txt @@ -0,0 +1,22 @@ +Monolithic Power Systems MP8859 voltage regulator + +Required properties: +- compatible: "mps,mp8859"; +- reg: I2C slave address. + +Optional subnode for regulator: "mp8859_dcdc", using common regulator +bindings given in . + +Example: + + mp8859: regulator@66 { + compatible = "mps,mp8859"; + reg = <0x66>; + dc_12v: mp8859_dcdc { + regulator-name = "dc_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml new file mode 100644 index 0000000000..0221397eb5 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mps,mp5416.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Monolithic Power System MP5416 PMIC + +maintainers: + - Saravanan Sekar + +properties: + $nodename: + pattern: "^pmic@[0-9a-f]{1,2}$" + compatible: + enum: + - mps,mp5416 + - mps,mp5496 + + reg: + maxItems: 1 + + regulators: + type: object + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts BUCK[1-4] and LDO[1-4] + + patternProperties: + "^buck[1-4]$": + $ref: regulator.yaml# + unevaluatedProperties: false + type: object + + "^ldo[1-4]$": + $ref: regulator.yaml# + unevaluatedProperties: false + type: object + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "mps,mp5416"; + reg = <0x69>; + + regulators { + + buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3975000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml new file mode 100644 index 0000000000..374a4f6b1e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mps,mp886x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Monolithic Power Systems MP8867/MP8869 voltage regulator + +maintainers: + - Jisheng Zhang + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - mps,mp8867 + - mps,mp8869 + + reg: + maxItems: 1 + + enable-gpios: + description: GPIO to enable/disable the regulator. + maxItems: 1 + + mps,fb-voltage-divider: + description: An array of two integers containing the resistor + values R1 and R2 of the feedback voltage divider in kilo ohms. + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + + mps,switch-frequency-hz: + description: The valid switch frequency in Hertz. + enum: [500000, 750000, 1000000, 1250000, 1500000] + +required: + - compatible + - reg + - enable-gpios + - mps,fb-voltage-divider + +unevaluatedProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@62 { + compatible = "mps,mp8869"; + regulator-name = "vcpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>; + mps,fb-voltage-divider = <80 240>; + reg = <0x62>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml new file mode 100644 index 0000000000..6de5b027f9 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mps,mpq7920.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Monolithic Power System MPQ7920 PMIC + +maintainers: + - Saravanan Sekar + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - mps,mpq7920 + + reg: + maxItems: 1 + + regulators: + type: object + + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5] + + properties: + mps,switch-freq: + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [0, 1, 2, 3] + default: 2 + description: | + switching frequency must be one of following corresponding value + 1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz + + ldortc: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + + patternProperties: + "^ldo[1-4]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + + "^buck[1-4]$": + type: object + $ref: regulator.yaml# + + properties: + mps,buck-softstart: + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [0, 1, 2, 3] + description: | + defines the soft start time of this buck, must be one of the following + corresponding values 150us, 300us, 610us, 920us + + mps,buck-phase-delay: + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [0, 1, 2, 3] + description: | + defines the phase delay of this buck, must be one of the following + corresponding values 0deg, 90deg, 180deg, 270deg + + mps,buck-ovp-disable: + type: boolean + description: | + disables over voltage protection of this buck + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "mps,mpq7920"; + reg = <0x69>; + + regulators { + mps,switch-freq = /bits/ 8 <1>; + + buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <3587500>; + regulator-min-microamp = <460000>; + regulator-max-microamp = <7600000>; + regulator-boot-on; + mps,buck-ovp-disable; + mps,buck-phase-delay = /bits/ 8 <2>; + mps,buck-softstart = /bits/ 8 <1>; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <3587500>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7932.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7932.yaml new file mode 100644 index 0000000000..2185cd011c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7932.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mps,mpq7932.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Monolithic Power System MPQ7932 PMIC + +maintainers: + - Saravanan Sekar + +properties: + compatible: + enum: + - mps,mpq7932 + + reg: + maxItems: 1 + + regulators: + type: object + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts BUCK[1-6] + + patternProperties: + "^buck[1-6]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@3 { + compatible = "mps,mpq7932"; + reg = <0x3>; + + regulators { + buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt new file mode 100644 index 0000000000..84d544d8c1 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt @@ -0,0 +1,35 @@ +Mediatek MT6311 Regulator + +Required properties: +- compatible: "mediatek,mt6311-regulator" +- reg: I2C slave address, usually 0x6b. +- regulators: List of regulators provided by this controller. It is named + to VDVFS and VBIASN. + The definition for each of these nodes is defined using the standard binding + for regulators at Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are: +BUCK: + VDVFS +LDO: + VBIASN + +Example: + mt6311: pmic@6b { + compatible = "mediatek,mt6311-regulator"; + reg = <0x6b>; + + regulators { + mt6311_vcpu_reg: VDVFS { + regulator-name = "VDVFS"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <10000>; + }; + mt6311_ldo_reg: VBIASN { + regulator-name = "VBIASN"; + regulator-min-microvolt = <200000>; + regulator-max-microvolt = <800000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml new file mode 100644 index 0000000000..6317daf76d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mt6315-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT6315 Regulator + +maintainers: + - Hsin-Hsiung Wang + +description: | + The MT6315 is a power management IC (PMIC) configurable with SPMI. + that contains 4 BUCKs output which can combine with each other + by different efuse settings. + +properties: + compatible: + const: mediatek,mt6315-regulator + + reg: + maxItems: 1 + + regulators: + type: object + description: List of regulators and its properties + + patternProperties: + "^vbuck[1-4]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + + properties: + regulator-compatible: + pattern: "^vbuck[1-4]$" + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + pmic@6 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x6 0>; + + regulators { + vbuck1 { + regulator-compatible = "vbuck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + }; + + vbuck3 { + regulator-compatible = "vbuck3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt new file mode 100644 index 0000000000..a48749db4d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt @@ -0,0 +1,237 @@ +Mediatek MT6323 Regulator + +All voltage regulators are defined as subnodes of the regulators node. A list +of regulators provided by this controller are defined as subnodes of the +PMIC's node. Each regulator is named according to its regulator type, +buck_ and ldo_. The definition for each of these nodes is defined +using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are:: +BUCK: + buck_vproc, buck_vsys, buck_vpa +LDO: + ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama, + ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2, + ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr, + ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio + +Example: + + pmic: mt6323 { + mt6323regulator: regulators { + mt6323_vproc_reg: buck_vproc{ + regulator-name = "vproc"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vsys_reg: buck_vsys{ + regulator-name = "vsys"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <2987500>; + regulator-ramp-delay = <25000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vpa_reg: buck_vpa{ + regulator-name = "vpa"; + regulator-min-microvolt = < 500000>; + regulator-max-microvolt = <3650000>; + }; + + mt6323_vtcxo_reg: ldo_vtcxo{ + regulator-name = "vtcxo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <90>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcn28_reg: ldo_vcn28{ + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_bt_reg: ldo_vcn33_bt{ + regulator-name = "vcn33_bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{ + regulator-name = "vcn33_wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_va_reg: ldo_va{ + regulator-name = "va"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcama_reg: ldo_vcama{ + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vio28_reg: ldo_vio28{ + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vusb_reg: ldo_vusb{ + regulator-name = "vusb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + regulator-boot-on; + }; + + mt6323_vmc_reg: ldo_vmc{ + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vmch_reg: ldo_vmch{ + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vemc3v3_reg: ldo_vemc3v3{ + regulator-name = "vemc3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vgp1_reg: ldo_vgp1{ + regulator-name = "vgp1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp2_reg: ldo_vgp2{ + regulator-name = "vgp2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp3_reg: ldo_vgp3{ + regulator-name = "vgp3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcn18_reg: ldo_vcn18{ + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim1_reg: ldo_vsim1{ + regulator-name = "vsim1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim2_reg: ldo_vsim2{ + regulator-name = "vsim2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vrtc_reg: ldo_vrtc{ + regulator-name = "vrtc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamaf_reg: ldo_vcamaf{ + regulator-name = "vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vibr_reg: ldo_vibr{ + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + }; + + mt6323_vrf18_reg: ldo_vrf18{ + regulator-name = "vrf18"; + regulator-min-microvolt = <1825000>; + regulator-max-microvolt = <1825000>; + regulator-enable-ramp-delay = <187>; + }; + + mt6323_vm_reg: ldo_vm{ + regulator-name = "vm"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vio18_reg: ldo_vio18{ + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamd_reg: ldo_vcamd{ + regulator-name = "vcamd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcamio_reg: ldo_vcamio{ + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt new file mode 100644 index 0000000000..b6384306db --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt @@ -0,0 +1,350 @@ +MediaTek MT6358 Regulator + +All voltage regulators provided by the MT6358 PMIC are described as the +subnodes of the MT6358 regulators node. Each regulator is named according +to its regulator type, buck_ and ldo_. The definition for each +of these nodes is defined using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are:: +BUCK: + buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu, + buck_vs2, buck_vmodem, buck_vs1 +LDO: + ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio, + ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others, + ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28, + ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18, + ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2 + +Example: + + pmic { + compatible = "mediatek,mt6358"; + + mt6358regulator: mt6358regulator { + compatible = "mediatek,mt6358-regulator"; + + mt6358_vdram1_reg: buck_vdram1 { + regulator-compatible = "buck_vdram1"; + regulator-name = "vdram1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2087500>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + + mt6358_vcore_reg: buck_vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-always-on; + }; + + mt6358_vpa_reg: buck_vpa { + regulator-name = "vpa"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3650000>; + regulator-ramp-delay = <50000>; + regulator-enable-ramp-delay = <250>; + }; + + mt6358_vproc11_reg: buck_vproc11 { + regulator-name = "vproc11"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-always-on; + }; + + mt6358_vproc12_reg: buck_vproc12 { + regulator-name = "vproc12"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-always-on; + }; + + mt6358_vgpu_reg: buck_vgpu { + regulator-name = "vgpu"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + }; + + mt6358_vs2_reg: buck_vs2 { + regulator-name = "vs2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2087500>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + + mt6358_vmodem_reg: buck_vmodem { + regulator-name = "vmodem"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <900>; + regulator-always-on; + }; + + mt6358_vs1_reg: buck_vs1 { + regulator-name = "vs1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2587500>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + + mt6358_vdram2_reg: ldo_vdram2 { + regulator-name = "vdram2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <3300>; + }; + + mt6358_vsim1_reg: ldo_vsim1 { + regulator-name = "vsim1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <540>; + }; + + mt6358_vibr_reg: ldo_vibr { + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6358_vrf12_reg: ldo_vrf12 { + compatible = "regulator-fixed"; + regulator-name = "vrf12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <120>; + }; + + mt6358_vio18_reg: ldo_vio18 { + compatible = "regulator-fixed"; + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <2700>; + regulator-always-on; + }; + + mt6358_vusb_reg: ldo_vusb { + regulator-name = "vusb"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <270>; + regulator-always-on; + }; + + mt6358_vcamio_reg: ldo_vcamio { + compatible = "regulator-fixed"; + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vcamd_reg: ldo_vcamd { + regulator-name = "vcamd"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vcn18_reg: ldo_vcn18 { + compatible = "regulator-fixed"; + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vfe28_reg: ldo_vfe28 { + compatible = "regulator-fixed"; + regulator-name = "vfe28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vsram_proc11_reg: ldo_vsram_proc11 { + regulator-name = "vsram_proc11"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + + mt6358_vcn28_reg: ldo_vcn28 { + compatible = "regulator-fixed"; + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vsram_others_reg: ldo_vsram_others { + regulator-name = "vsram_others"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + + mt6358_vsram_gpu_reg: ldo_vsram_gpu { + regulator-name = "vsram_gpu"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + }; + + mt6358_vxo22_reg: ldo_vxo22 { + compatible = "regulator-fixed"; + regulator-name = "vxo22"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <120>; + regulator-always-on; + }; + + mt6358_vefuse_reg: ldo_vefuse { + regulator-name = "vefuse"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vaux18_reg: ldo_vaux18 { + compatible = "regulator-fixed"; + regulator-name = "vaux18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vmch_reg: ldo_vmch { + regulator-name = "vmch"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6358_vbif28_reg: ldo_vbif28 { + compatible = "regulator-fixed"; + regulator-name = "vbif28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vsram_proc12_reg: ldo_vsram_proc12 { + regulator-name = "vsram_proc12"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + + mt6358_vcama1_reg: ldo_vcama1 { + regulator-name = "vcama1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vemc_reg: ldo_vemc { + regulator-name = "vemc"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <60>; + regulator-always-on; + }; + + mt6358_vio28_reg: ldo_vio28 { + compatible = "regulator-fixed"; + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_va12_reg: ldo_va12 { + compatible = "regulator-fixed"; + regulator-name = "va12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <270>; + regulator-always-on; + }; + + mt6358_vrf18_reg: ldo_vrf18 { + compatible = "regulator-fixed"; + regulator-name = "vrf18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <120>; + }; + + mt6358_vcn33_reg: ldo_vcn33 { + regulator-name = "vcn33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3500000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vcama2_reg: ldo_vcama2 { + regulator-name = "vcama2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vmc_reg: ldo_vmc { + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6358_vldo28_reg: ldo_vldo28 { + regulator-name = "vldo28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vaud28_reg: ldo_vaud28 { + compatible = "regulator-fixed"; + regulator-name = "vaud28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vsim2_reg: ldo_vsim2 { + regulator-name = "vsim2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <540>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml new file mode 100644 index 0000000000..d6b3b5a5c0 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml @@ -0,0 +1,385 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mt6359-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6359 Regulator from MediaTek Integrated + +maintainers: + - Hsin-Hsiung Wang + +description: | + List of regulators provided by this controller. It is named + according to its regulator type, buck_ and ldo_. + MT6359 regulators node should be sub node of the MT6397 MFD node. + +patternProperties: + "^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$" + + unevaluatedProperties: false + + "^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^v(ibr|rf12|usb|camio|efuse|xo22)$" + + unevaluatedProperties: false + + "^ldo_v(rfck|emc|a12|a09|ufs|bbck)$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^v(rfck|emc|a12|a09|ufs|bbck)$" + + unevaluatedProperties: false + + "^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$" + + unevaluatedProperties: false + + "^ldo_vsram_(proc2|others|md|proc1|others_sshub)$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^vsram_(proc2|others|md|proc1|others_sshub)$" + + unevaluatedProperties: false + + "^ldo_v(fe|bif|io)28$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^v(fe|bif|io)28$" + + unevaluatedProperties: false + + "^ldo_v(aud|io|aux|rf|m)18$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^v(aud|io|aux|rf|m)18$" + + unevaluatedProperties: false + + "^ldo_vsim[12]$": + type: object + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^vsim[12]$" + + required: + - regulator-name + + unevaluatedProperties: false + +additionalProperties: false + +examples: + - | + pmic { + regulators { + mt6359_vs1_buck_reg: buck_vs1 { + regulator-name = "vs1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + mt6359_vgpu11_buck_reg: buck_vgpu11 { + regulator-name = "vgpu11"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vmodem_buck_reg: buck_vmodem { + regulator-name = "vmodem"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <10760>; + regulator-enable-ramp-delay = <200>; + }; + mt6359_vpu_buck_reg: buck_vpu { + regulator-name = "vpu"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vcore_buck_reg: buck_vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vs2_buck_reg: buck_vs2 { + regulator-name = "vs2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1600000>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + mt6359_vpa_buck_reg: buck_vpa { + regulator-name = "vpa"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3650000>; + regulator-enable-ramp-delay = <300>; + }; + mt6359_vproc2_buck_reg: buck_vproc2 { + regulator-name = "vproc2"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vproc1_buck_reg: buck_vproc1 { + regulator-name = "vproc1"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vcore_sshub_buck_reg: buck_vcore_sshub { + regulator-name = "vcore_sshub"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + }; + mt6359_vgpu11_sshub_buck_reg: buck_vgpu11_sshub { + regulator-name = "vgpu11_sshub"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + }; + mt6359_vaud18_ldo_reg: ldo_vaud18 { + regulator-name = "vaud18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vsim1_ldo_reg: ldo_vsim1 { + regulator-name = "vsim1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + }; + mt6359_vibr_ldo_reg: ldo_vibr { + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + mt6359_vrf12_ldo_reg: ldo_vrf12 { + regulator-name = "vrf12"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + }; + mt6359_vusb_ldo_reg: ldo_vusb { + regulator-name = "vusb"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <960>; + regulator-always-on; + }; + mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 { + regulator-name = "vsram_proc2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + mt6359_vio18_ldo_reg: ldo_vio18 { + regulator-name = "vio18"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-enable-ramp-delay = <960>; + regulator-always-on; + }; + mt6359_vcamio_ldo_reg: ldo_vcamio { + regulator-name = "vcamio"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + mt6359_vcn18_ldo_reg: ldo_vcn18 { + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vfe28_ldo_reg: ldo_vfe28 { + regulator-name = "vfe28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <120>; + }; + mt6359_vcn13_ldo_reg: ldo_vcn13 { + regulator-name = "vcn13"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + }; + mt6359_vcn33_1_bt_ldo_reg: ldo_vcn33_1_bt { + regulator-name = "vcn33_1_bt"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_vcn33_1_wifi_ldo_reg: ldo_vcn33_1_wifi { + regulator-name = "vcn33_1_wifi"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_vaux18_ldo_reg: ldo_vaux18 { + regulator-name = "vaux18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + mt6359_vsram_others_ldo_reg: ldo_vsram_others { + regulator-name = "vsram_others"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vefuse_ldo_reg: ldo_vefuse { + regulator-name = "vefuse"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + }; + mt6359_vxo22_ldo_reg: ldo_vxo22 { + regulator-name = "vxo22"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + mt6359_vrfck_ldo_reg: ldo_vrfck { + regulator-name = "vrfck"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1700000>; + }; + mt6359_vrfck_1_ldo_reg: ldo_vrfck_1 { + regulator-name = "vrfck"; + regulator-min-microvolt = <1240000>; + regulator-max-microvolt = <1600000>; + }; + mt6359_vbif28_ldo_reg: ldo_vbif28 { + regulator-name = "vbif28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vio28_ldo_reg: ldo_vio28 { + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + mt6359_vemc_ldo_reg: ldo_vemc { + regulator-name = "vemc"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + }; + mt6359_vemc_1_ldo_reg: ldo_vemc_1 { + regulator-name = "vemc"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + mt6359_vcn33_2_bt_ldo_reg: ldo_vcn33_2_bt { + regulator-name = "vcn33_2_bt"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_vcn33_2_wifi_ldo_reg: ldo_vcn33_2_wifi { + regulator-name = "vcn33_2_wifi"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_va12_ldo_reg: ldo_va12 { + regulator-name = "va12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + mt6359_va09_ldo_reg: ldo_va09 { + regulator-name = "va09"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + }; + mt6359_vrf18_ldo_reg: ldo_vrf18 { + regulator-name = "vrf18"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1810000>; + }; + mt6359_vsram_md_ldo_reg: ldo_vsram_md { + regulator-name = "vsram_md"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <10760>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vufs_ldo_reg: ldo_vufs { + regulator-name = "vufs"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + mt6359_vm18_ldo_reg: ldo_vm18 { + regulator-name = "vm18"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-always-on; + }; + mt6359_vbbck_ldo_reg: ldo_vbbck { + regulator-name = "vbbck"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1200000>; + }; + mt6359_vsram_proc1_ldo_reg: ldo_vsram_proc1 { + regulator-name = "vsram_proc1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + mt6359_vsim2_ldo_reg: ldo_vsim2 { + regulator-name = "vsim2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + }; + mt6359_vsram_others_sshub_ldo: ldo_vsram_others_sshub { + regulator-name = "vsram_others_sshub"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml new file mode 100644 index 0000000000..9c879bc3c3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mt6360-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6360 Regulator from MediaTek Integrated + +maintainers: + - Gene Chen + +description: | + list of regulators provided by this controller, must be named + after their hardware counterparts buck1/2 or ldo1/2/3/5/6/7 + +properties: + compatible: + const: mediatek,mt6360-regulator + + LDO_VIN1-supply: + description: Input supply phandle(s) for LDO1/2/3 + LDO_VIN2-supply: + description: Input supply phandle(s) for LDO5 + LDO_VIN3-supply: + description: Input supply phandle(s) for LDO6/7 + +patternProperties: + "^buck[12]$": + $ref: regulator.yaml# + unevaluatedProperties: false + + "^ldo[123567]$": + $ref: regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include + #include + regulator { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN3-supply = <&BUCK2>; + buck1 { + regulator-name = "mt6360,buck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = ; + }; + BUCK2: buck2 { + regulator-name = "mt6360,buck2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = ; + }; + ldo6 { + regulator-name = "mt6360,ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = ; + }; + ldo7 { + regulator-name = "mt6360,ldo7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = ; + }; + ldo1 { + regulator-name = "mt6360,ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + ldo2 { + regulator-name = "mt6360,ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + ldo3 { + regulator-name = "mt6360,ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + ldo5 { + regulator-name = "mt6360,ldo5"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mt6380-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6380-regulator.txt new file mode 100644 index 0000000000..0058441f16 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6380-regulator.txt @@ -0,0 +1,89 @@ +MediaTek MT6380 Regulator + +All voltage regulators provided by the MT6380 PMIC are described as the +subnodes of the MT6380 regulators node. Each regulator is named according +to its regulator type, buck- and ldo-. The definition for each +of these nodes is defined using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are: +BUCK: + buck-core1, buck-vcore, buck-vrf +LDO: + ldo-vm ,ldo-va , ldo-vphy, ldo-vddr, ldo-vt + +Example: + + regulators { + compatible = "mediatek,mt6380-regulator"; + + mt6380_vcpu_reg: buck-vcore1 { + regulator-name = "vcore1"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-ramp-delay = <6250>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vcore_reg: buck-vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1393750>; + regulator-ramp-delay = <6250>; + }; + + mt6380_vrf_reg: buck-vrf { + regulator-name = "vrf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1575000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vm_reg: ldo-vm { + regulator-name = "vm"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_va_reg: ldo-va { + regulator-name = "va"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vphy_reg: ldo-vphy { + regulator-name = "vphy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vddr_reg: ldo-vddr { + regulator-name = "vddr"; + regulator-min-microvolt = <1240000>; + regulator-max-microvolt = <1840000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vt_reg: ldo-vt { + regulator-name = "vt"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt new file mode 100644 index 0000000000..c080086d3e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt @@ -0,0 +1,220 @@ +Mediatek MT6397 Regulator + +Required properties: +- compatible: "mediatek,mt6397-regulator" +- mt6397regulator: List of regulators provided by this controller. It is named + according to its regulator type, buck_ and ldo_. + The definition for each of these nodes is defined using the standard binding + for regulators at Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are:: +BUCK: + buck_vpca15, buck_vpca7, buck_vsramca15, buck_vsramca7, buck_vcore, buck_vgpu, + buck_vdrm, buck_vio18 +LDO: + ldo_vtcxo, ldo_va28, ldo_vcama, ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, + ldo_vemc3v3, ldo_vgp1, ldo_vgp2, ldo_vgp3, ldo_vgp4, ldo_vgp5, ldo_vgp6, + ldo_vibr + +BUCK regulators can set regulator-initial-mode and regulator-allowed-modes to +values specified in dt-bindings/regulator/mediatek,mt6397-regulator.h + +Example: + pmic { + compatible = "mediatek,mt6397"; + + mt6397regulator: mt6397regulator { + compatible = "mediatek,mt6397-regulator"; + + mt6397_vpca15_reg: buck_vpca15 { + regulator-compatible = "buck_vpca15"; + regulator-name = "vpca15"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <200>; + }; + + mt6397_vpca7_reg: buck_vpca7 { + regulator-compatible = "buck_vpca7"; + regulator-name = "vpca7"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vsramca15_reg: buck_vsramca15 { + regulator-compatible = "buck_vsramca15"; + regulator-name = "vsramca15"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + + }; + + mt6397_vsramca7_reg: buck_vsramca7 { + regulator-compatible = "buck_vsramca7"; + regulator-name = "vsramca7"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + + }; + + mt6397_vcore_reg: buck_vcore { + regulator-compatible = "buck_vcore"; + regulator-name = "vcore"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vgpu_reg: buck_vgpu { + regulator-compatible = "buck_vgpu"; + regulator-name = "vgpu"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vdrm_reg: buck_vdrm { + regulator-compatible = "buck_vdrm"; + regulator-name = "vdrm"; + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <500>; + }; + + mt6397_vio18_reg: buck_vio18 { + regulator-compatible = "buck_vio18"; + regulator-name = "vio18"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2120000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <500>; + }; + + mt6397_vtcxo_reg: ldo_vtcxo { + regulator-compatible = "ldo_vtcxo"; + regulator-name = "vtcxo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <90>; + }; + + mt6397_va28_reg: ldo_va28 { + regulator-compatible = "ldo_va28"; + regulator-name = "va28"; + /* fixed output 2.8 V */ + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vcama_reg: ldo_vcama { + regulator-compatible = "ldo_vcama"; + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vio28_reg: ldo_vio28 { + regulator-compatible = "ldo_vio28"; + regulator-name = "vio28"; + /* fixed output 2.8 V */ + regulator-enable-ramp-delay = <240>; + }; + + mt6397_usb_reg: ldo_vusb { + regulator-compatible = "ldo_vusb"; + regulator-name = "vusb"; + /* fixed output 3.3 V */ + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vmc_reg: ldo_vmc { + regulator-compatible = "ldo_vmc"; + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vmch_reg: ldo_vmch { + regulator-compatible = "ldo_vmch"; + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vemc_3v3_reg: ldo_vemc3v3 { + regulator-compatible = "ldo_vemc3v3"; + regulator-name = "vemc_3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp1_reg: ldo_vgp1 { + regulator-compatible = "ldo_vgp1"; + regulator-name = "vcamd"; + regulator-min-microvolt = <1220000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + }; + + mt6397_vgp2_reg: ldo_vgp2 { + egulator-compatible = "ldo_vgp2"; + regulator-name = "vcamio"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp3_reg: ldo_vgp3 { + regulator-compatible = "ldo_vgp3"; + regulator-name = "vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp4_reg: ldo_vgp4 { + regulator-compatible = "ldo_vgp4"; + regulator-name = "vgp4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp5_reg: ldo_vgp5 { + regulator-compatible = "ldo_vgp5"; + regulator-name = "vgp5"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp6_reg: ldo_vgp6 { + regulator-compatible = "ldo_vgp6"; + regulator-name = "vgp6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vibr_reg: ldo_vibr { + regulator-compatible = "ldo_vibr"; + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/nvidia,tegra-regulators-coupling.txt b/Documentation/devicetree/bindings/regulator/nvidia,tegra-regulators-coupling.txt new file mode 100644 index 0000000000..4bf2dbf7c6 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/nvidia,tegra-regulators-coupling.txt @@ -0,0 +1,65 @@ +NVIDIA Tegra Regulators Coupling +================================ + +NVIDIA Tegra SoC's have a mandatory voltage-coupling between regulators. +Thus on Tegra20 there are 3 coupled regulators and on NVIDIA Tegra30 +there are 2. + +Tegra20 voltage coupling +------------------------ + +On Tegra20 SoC's there are 3 coupled regulators: CORE, RTC and CPU. +The CORE and RTC voltages shall be in a range of 170mV from each other +and they both shall be higher than the CPU voltage by at least 120mV. + +Tegra30 voltage coupling +------------------------ + +On Tegra30 SoC's there are 2 coupled regulators: CORE and CPU. The CORE +and CPU voltages shall be in a range of 300mV from each other and CORE +voltage shall be higher than the CPU by N mV, where N depends on the CPU +voltage. + +Required properties: +- nvidia,tegra-core-regulator: Boolean property that designates regulator + as the "Core domain" voltage regulator. +- nvidia,tegra-rtc-regulator: Boolean property that designates regulator + as the "RTC domain" voltage regulator. +- nvidia,tegra-cpu-regulator: Boolean property that designates regulator + as the "CPU domain" voltage regulator. + +Example: + + pmic { + regulators { + core_vdd_reg: core { + regulator-name = "vdd_core"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&rtc_vdd_reg &cpu_vdd_reg>; + regulator-coupled-max-spread = <170000 550000>; + + nvidia,tegra-core-regulator; + }; + + rtc_vdd_reg: rtc { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&core_vdd_reg &cpu_vdd_reg>; + regulator-coupled-max-spread = <170000 550000>; + + nvidia,tegra-rtc-regulator; + }; + + cpu_vdd_reg: cpu { + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1125000>; + regulator-coupled-with = <&core_vdd_reg &rtc_vdd_reg>; + regulator-coupled-max-spread = <550000 550000>; + + nvidia,tegra-cpu-regulator; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml new file mode 100644 index 0000000000..3d469b8e97 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -0,0 +1,195 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/nxp,pca9450-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PCA9450A/B/C Power Management Integrated Circuit regulators + +maintainers: + - Robin Gong + +description: | + Regulator nodes should be named to BUCK_ and LDO_. The + definition for each of these nodes is defined using the standard + binding for regulators at + Documentation/devicetree/bindings/regulator/regulator.txt. + Datasheet is available at + https://www.nxp.com/docs/en/data-sheet/PCA9450DS.pdf + +# The valid names for PCA9450 regulator nodes are: +# BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, +# LDO1, LDO2, LDO3, LDO4, LDO5 +# Note: Buck3 removed on PCA9450B and connect with Buck1 on PCA9450C. + +properties: + compatible: + enum: + - nxp,pca9450a + - nxp,pca9450b + - nxp,pca9450c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + type: object + description: | + list of regulators provided by this controller + + patternProperties: + "^LDO[1-5]$": + type: object + $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + unevaluatedProperties: false + + "^BUCK[1-6]$": + type: object + $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + properties: + nxp,dvs-run-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 600000 + maximum: 2187500 + description: + PMIC default "RUN" state voltage in uV. Only Buck1~3 have such + dvs(dynamic voltage scaling) property. + + nxp,dvs-standby-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 600000 + maximum: 2187500 + description: + PMIC default "STANDBY" state voltage in uV. Only Buck1~3 have such + dvs(dynamic voltage scaling) property. + + unevaluatedProperties: false + + additionalProperties: false + + sd-vsel-gpios: + description: GPIO that is used to switch LDO5 between being configured by + LDO5CTRL_L or LDO5CTRL_H register. Use this if the SD_VSEL signal is + connected to a host GPIO. + + nxp,i2c-lt-enable: + type: boolean + description: + Indicates that the I2C Level Translator is used. + + nxp,wdog_b-warm-reset: + type: boolean + description: + When WDOG_B signal is asserted a warm reset will be done instead of cold + reset. + +required: + - compatible + - reg + - interrupts + - regulators + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@25 { + compatible = "nxp,pca9450b"; + reg = <0x25>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + buck4: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + buck5: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + ldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + ldo3: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml new file mode 100644 index 0000000000..894bdbca78 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/nxp,pf8x00-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PF8100/PF8121A/PF8200 PMIC regulators + +maintainers: + - Jagan Teki + - Troy Kisky + +description: | + PF8100/PF8121A/PF8200 is a PMIC designed for highperformance consumer + applications. It features seven high efficiency buck converters, four + linear and one vsnvs regulators. It has built-in one time programmable + fuse bank for device configurations. + +properties: + compatible: + enum: + - nxp,pf8100 + - nxp,pf8121a + - nxp,pf8200 + + reg: + maxItems: 1 + + regulators: + type: object + description: | + list of regulators provided by this controller + + patternProperties: + "^ldo[1-4]$": + type: object + $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + unevaluatedProperties: false + + "^buck[1-7]$": + type: object + $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + properties: + nxp,ilim-ma: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 2100 + maximum: 4500 + deprecated: true + description: + BUCK regulators current limit in mA. + This property is deprecated, please use + "regulator-max-microamp" instead. + + Listed current limits in mA are, + 2100 (default) + 2600 + 3000 + 4500 + + nxp,phase-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + enum: [ 0, 45, 90, 135, 180, 225, 270, 315 ] + description: + BUCK regulators phase shift control in degrees. + + unevaluatedProperties: false + + properties: + vsnvs: + type: object + $ref: regulator.yaml# + description: + Properties for single VSNVS regulator. + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@8 { + compatible = "nxp,pf8100"; + reg = <0x08>; + + regulators { + reg_ldo1: ldo1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <1500000>; + }; + + reg_ldo2: ldo2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <1500000>; + }; + + reg_ldo3: ldo3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <1500000>; + }; + + reg_ldo4: ldo4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <1500000>; + }; + + reg_buck1: buck1 { + nxp,ilim-ma = <4500>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <400000>; + }; + + reg_buck2: buck2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <400000>; + }; + + reg_buck3: buck3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <400000>; + }; + + reg_buck4: buck4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <400000>; + }; + + reg_buck5: buck5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <400000>; + }; + + reg_buck6: buck6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <400000>; + }; + + reg_buck7: buck7 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + }; + + reg_vsnvs: vsnvs { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml b/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml new file mode 100644 index 0000000000..eb61e04ef8 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/onnn,fan53880.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Onsemi FAN53880 PMIC + +maintainers: + - Christoph Fritz + +description: | + The FAN53880 is an I2C porgrammable power management IC (PMIC) + that contains a BUCK (step-down converter), four low dropouts (LDO) + and one BOOST (step-up converter) output. It is designed for mobile + power applications. + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - onnn,fan53880 + + reg: + maxItems: 1 + + VIN12-supply: + description: Input supply phandle(s) for LDO1 and LDO2 + + VIN3-supply: + description: Input supply phandle(s) for LDO3 + + VIN4-supply: + description: Input supply phandle(s) for LDO4 + + PVIN-supply: + description: Input supply phandle(s) for BUCK and BOOST + + regulators: + type: object + $ref: regulator.yaml# + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts LDO[1-4], BUCK and BOOST + + patternProperties: + "^LDO[1-4]$": + type: object + $ref: regulator.yaml# + + "^BUCK|BOOST$": + type: object + $ref: regulator.yaml# + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@35 { + compatible = "onnn,fan53880"; + reg = <0x35>; + + PVIN-supply = <&fixreg_example_vcc>; + + regulators { + BUCK { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt new file mode 100644 index 0000000000..84bc76a7c3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt @@ -0,0 +1,89 @@ +* palmas regulator IP block devicetree bindings + +The tps659038 for the AM57x class have OTP spins that +have different part numbers but the same functionality. There +is not a need to add the OTP spins to the palmas driver. The +spin devices should use the tps659038 as it's compatible value. +This is the list of those devices: +tps659037 + +Required properties: +- compatible : Should be from the list + ti,twl6035-pmic + ti,twl6036-pmic + ti,twl6037-pmic + ti,tps65913-pmic + ti,tps65914-pmic + ti,tps65917-pmic + ti,tps659038-pmic +and also the generic series names + ti,palmas-pmic +- interrupts : The interrupt number and the type which can be looked up here: + arch/arm/boot/dts/include/dt-bindings/interrupt-controller/irq.h +- interrupts-name: The names of the individual interrupts. + +Optional properties: +- ti,ldo6-vibrator : ldo6 is in vibrator mode + +Optional nodes: +- regulators : Must contain a sub-node per regulator from the list below. + Each sub-node should contain the constraints and initialization + information for that regulator. See regulator.txt for a + description of standard properties for these sub-nodes. + Additional custom properties are listed below. + + For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP, + smps45, smps457, smps7 depending on variant, smps6, smps[8-9], + smps10_out2, smps10_out1, ldo[1-9], ldoln, ldousb. + + Optional sub-node properties: + ti,warm-reset - maintain voltage during warm reset(boolean) + ti,roof-floor - This takes as optional argument on platform supporting + the rail from desired external control. If there is no argument then + it will be assume that it is controlled by NSLEEP pin. + The valid value for external pins are: + ENABLE1 then 1, + ENABLE2 then 2 or + NSLEEP then 3. + ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto, + 2 - eco, 3 - forced pwm + ti,smps-range - OTP has the wrong range set for the hardware so override + 0 - low range, 1 - high range. + +- ti,system-power-controller: Telling whether or not this pmic is controlling + the system power. + +Example: + +#include + +pmic { + compatible = "ti,twl6035-pmic", "ti,palmas-pmic"; + interrupt-parent = <&palmas>; + interrupts = <14 IRQ_TYPE_NONE>; + interrupts-name = "short-irq"; + + ti,ldo6-vibrator; + + ti,system-power-controller; + + regulators { + smps12_reg : smps12 { + regulator-name = "smps12"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + ti,warm-reset; + ti,roof-floor = <1>; /* ENABLE1 control */ + ti,mode-sleep = <0>; + ti,smps-range = <1>; + }; + + ldo1_reg: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/pbias-regulator.txt b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt new file mode 100644 index 0000000000..acbcb452a6 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt @@ -0,0 +1,32 @@ +PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs. + +Required properties: +- compatible: + - should be "ti,pbias-dra7" for DRA7 + - should be "ti,pbias-omap2" for OMAP2 + - should be "ti,pbias-omap3" for OMAP3 + - should be "ti,pbias-omap4" for OMAP4 + - should be "ti,pbias-omap5" for OMAP5 + - "ti,pbias-omap" is deprecated +- reg: pbias register offset from syscon base and size of pbias register. +- syscon : phandle of the system control module +- regulator-name : should be + pbias_mmc_omap2430 for OMAP2430, OMAP3 SoCs + pbias_sim_omap3 for OMAP3 SoCs + pbias_mmc_omap4 for OMAP4 SoCs + pbias_mmc_omap5 for OMAP5 and DRA7 SoC + +Optional properties: +- Any optional property defined in bindings/regulator/regulator.txt + +Example: + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0 0x4>; + syscon = <&omap5_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml new file mode 100644 index 0000000000..0eda44752c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/pfuze100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PFUZE100 family of regulators + +maintainers: + - Robin Gong + +description: | + The valid names for regulators are: + --PFUZE100 + sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6 + --PFUZE200 + sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin + --PFUZE3000 + sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4 + --PFUZE3001 + sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4 + + Each regulator is defined using the standard binding for regulators. + +properties: + $nodename: + pattern: "^pmic@[0-9]$" + + compatible: + enum: + - fsl,pfuze100 + - fsl,pfuze200 + - fsl,pfuze3000 + - fsl,pfuze3001 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + fsl,pfuze-support-disable-sw: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Boolean, if present disable all unused switch regulators to save power + consumption. Attention, ensure that all important regulators + (e.g. DDR ref, DDR supply) has set the "regulator-always-on" property. + If not present, the switched regulators are always on and can't be + disabled. This binding is a workaround to keep backward compatibility + with old dtb's which rely on the fact that the switched regulators are + always on and don't mark them explicit as "regulator-always-on". + + fsl,pmic-stby-poweroff: + $ref: /schemas/types.yaml#/definitions/flag + description: | + if present, configure the PMIC to shutdown all + power rails when PMIC_STBY_REQ line is asserted during the power off sequence. + Use this option if the SoC should be powered off by external power management + IC (PMIC) on PMIC_STBY_REQ signal. + As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal. + + regulators: + type: object + description: | + list of regulators provided by this controller. + + patternProperties: + "^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$": + $ref: regulator.yaml# + type: object + unevaluatedProperties: false + + "^vgen[1-6]$": + $ref: regulator.yaml# + type: object + unevaluatedProperties: false + + "^vldo[1-4]$": + $ref: regulator.yaml# + type: object + unevaluatedProperties: false + + "^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$": + $ref: regulator.yaml# + type: object + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/pv88060.txt b/Documentation/devicetree/bindings/regulator/pv88060.txt new file mode 100644 index 0000000000..6a7c8a92fd --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pv88060.txt @@ -0,0 +1,124 @@ +* Powerventure Semiconductor PV88060 Voltage Regulator + +Required properties: +- compatible: "pvs,pv88060". +- reg: I2C slave address, usually 0x49. +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4, + SW5, and SW6. + +Optional properties: +- Any optional property defined in regulator.txt + +Example + + pmic: pv88060@49 { + compatible = "pvs,pv88060"; + reg = <0x49>; + interrupt-parent = <&gpio>; + interrupts = <24 24>; + + regulators { + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <4387500>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + regulator-boot-on; + }; + + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + SW1 { + regulator-name = "sw1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + SW2 { + regulator-name = "sw2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW3 { + regulator-name = "sw3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW4 { + regulator-name = "sw4"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW5 { + regulator-name = "sw5"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW6 { + regulator-name = "sw6"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/pv88080.txt b/Documentation/devicetree/bindings/regulator/pv88080.txt new file mode 100644 index 0000000000..e6e4b9c82d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pv88080.txt @@ -0,0 +1,62 @@ +* Powerventure Semiconductor PV88080 Voltage Regulator + +Required properties: +- compatible: Must be one of the following, depending on the + silicon version: + - "pvs,pv88080" (DEPRECATED) + + - "pvs,pv88080-aa" for PV88080 AA or AB silicon + - "pvs,pv88080-ba" for PV88080 BA or BB silicon + NOTE: The use of the compatibles with no silicon version is deprecated. +- reg: I2C slave address, usually 0x49 +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + BUCK1, BUCK2, BUCK3 and HVBUCK. + +Optional properties: +- Any optional property defined in regulator.txt + +Example: + + pmic: pv88080@49 { + compatible = "pvs,pv88080-ba"; + reg = <0x49>; + interrupt-parent = <&gpio>; + interrupts = <24 24>; + + regulators { + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = < 220000>; + regulator-max-microamp = <7040000>; + }; + + BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + }; + + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <2193750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + }; + + HVBUCK { + regulator-name = "hvbuck"; + regulator-min-microvolt = < 5000>; + regulator-max-microvolt = <1275000>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/regulator/pv88090.txt b/Documentation/devicetree/bindings/regulator/pv88090.txt new file mode 100644 index 0000000000..e52b2a95cd --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pv88090.txt @@ -0,0 +1,65 @@ +* Powerventure Semiconductor PV88090 Voltage Regulator + +Required properties: +- compatible: "pvs,pv88090". +- reg: I2C slave address, usually 0x48. +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + BUCK1, BUCK2, BUCK3, LDO1, and LDO2. + +Optional properties: +- Any optional property defined in regulator.txt + +Example + + pmic: pv88090@48 { + compatible = "pvs,pv88090"; + reg = <0x48>; + interrupt-parent = <&gpio>; + interrupts = <24 24>; + + regulators { + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = < 220000>; + regulator-max-microamp = <7040000>; + regulator-boot-on; + }; + + BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + }; + + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + regulator-boot-on; + }; + + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <4350000>; + regulator-boot-on; + }; + + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = < 650000>; + regulator-max-microvolt = <2225000>; + regulator-boot-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml new file mode 100644 index 0000000000..80ecf938b7 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/pwm-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic PWM Regulator + +maintainers: + - Brian Norris + - Lee Jones + - Alexandre Courbot + +description: | + Currently supports 2 modes of operation: + + Voltage Table: + When in this mode, a voltage table (See below) of predefined voltage <=> + duty-cycle values must be provided via DT. Limitations are that the + regulator can only operate at the voltages supplied in the table. + Intermediary duty-cycle values which would normally allow finer grained + voltage selection are ignored and rendered useless. Although more control + is given to the user if the assumptions made in continuous-voltage mode do + not reign true. + + Continuous Voltage: + This mode uses the regulator's maximum and minimum supplied voltages + specified in the regulator-{min,max}-microvolt properties to calculate + appropriate duty-cycle values. This allows for a much more fine grained + solution when compared with voltage-table mode above. This solution does + make an assumption that a %50 duty-cycle value will cause the regulator + voltage to run at half way between the supplied max_uV and min_uV values. + + If voltage-table is provided, then the device will be used in Voltage Table + Mode. If no voltage-table is provided, then the device will be used in + Continuous Voltage Mode. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + const: pwm-regulator + + pwms: + maxItems: 1 + + voltage-table: + description: Voltage and Duty-Cycle table. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: voltage in microvolts (uV) + - description: duty-cycle in percent (%) + + enable-gpios: + description: Regulator enable GPIO + maxItems: 1 + + # Optional properties for Continuous mode: + pwm-dutycycle-unit: + description: + Integer value encoding the duty cycle unit. If not + defined, <100> is assumed, meaning that + pwm-dutycycle-range contains values expressed in + percent. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 100 + + pwm-dutycycle-range: + description: + Should contain 2 entries. The first entry is encoding + the dutycycle for regulator-min-microvolt and the + second one the dutycycle for regulator-max-microvolt. + Duty cycle values are expressed in pwm-dutycycle-unit. + If not defined, <0 100> is assumed. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: the dutycycle for regulator-min-microvolt + - description: the dutycycle for regulator-max-microvolt + default: [ 0 100 ] + +required: + - compatible + - pwms + +unevaluatedProperties: false + +examples: + - | + #include + + // Continuous Voltage With Enable GPIO Example: + regulator { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 8448 0>; + enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <1016000>; + regulator-max-microvolt = <1114000>; + regulator-name = "vdd_logic"; + /* unit == per-mille */ + pwm-dutycycle-unit = <1000>; + /* + * Inverted PWM logic, and the duty cycle range is limited + * to 30%-70%. + */ + pwm-dutycycle-range = <700 300>; /* */ + }; + + - | + // Voltage Table Example: + regulator { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 8448 0>; + regulator-min-microvolt = <1016000>; + regulator-max-microvolt = <1114000>; + regulator-name = "vdd_logic"; + + /* Voltage Duty-Cycle */ + voltage-table = <1114000 0>, + <1095000 10>, + <1076000 20>, + <1056000 30>, + <1036000 40>, + <1016000 50>; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml new file mode 100644 index 0000000000..b4eb4001eb --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,rpm-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPM regulator + +description: + The Qualcomm RPM regulator is modelled as a subdevice of the RPM. + + Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml + for information regarding the RPM node. + + The regulator node houses sub-nodes for each regulator within the device. + Each sub-node is identified using the node's name, with valid values listed + for each of the pmics below. + + For pm8058 l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, + l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4, + lvs0, lvs1, ncp + + For pm8901 l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3, + mvs + + For pm8921 s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28, + l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch, + ncp + + For pm8018 s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l14, lvs1 + + For smb208 s1a, s1b, s2a, s2b + +maintainers: + - Bjorn Andersson + +properties: + compatible: + enum: + - qcom,rpm-pm8058-regulators + - qcom,rpm-pm8901-regulators + - qcom,rpm-pm8921-regulators + - qcom,rpm-pm8018-regulators + - qcom,rpm-smb208-regulators + +patternProperties: + ".*-supply$": + description: Input supply phandle(s) for this node + + "^((s|l|lvs)[0-9]*|s[1-2][a-b]|ncp|mvs|usb-switch|hdmi-switch)$": + description: List of regulators and its properties + $ref: regulator.yaml# + unevaluatedProperties: false + properties: + bias-pull-down: + description: enable pull down of the regulator when inactive + type: boolean + + qcom,switch-mode-frequency: + description: Frequency (Hz) of the switch-mode power supply + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 19200000 + - 9600000 + - 6400000 + - 4800000 + - 3840000 + - 3200000 + - 2740000 + - 2400000 + - 2130000 + - 1920000 + - 1750000 + - 1600000 + - 1480000 + - 1370000 + - 1280000 + - 1200000 + + qcom,force-mode: + description: Indicates that the regulator should be forced to a particular mode + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # QCOM_RPM_FORCE_MODE_NONE do not force any mode + - 1 # QCOM_RPM_FORCE_MODE_LPM force into low power mode + - 2 # QCOM_RPM_FORCE_MODE_HPM force into high power mode + - 3 # QCOM_RPM_FORCE_MODE_AUTO allow regulator to automatically select its own mode + # based on realtime current draw, only for pm8921 smps and ftsmps + + qcom,power-mode-hysteretic: + description: select that the power supply should operate in hysteretic mode, + instead of the default pwm mode + type: boolean + +additionalProperties: false + +required: + - compatible + +examples: + - | + #include + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + + s1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + bias-pull-down; + + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + + qcom,force-mode = ; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml new file mode 100644 index 0000000000..127a6f39b7 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -0,0 +1,497 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,rpmh-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. RPMh Regulators + +maintainers: + - Bjorn Andersson + - Krzysztof Kozlowski + +description: | + rpmh-regulator devices support PMIC regulator management via the Voltage + Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators. + The APPS processor communicates with these hardware blocks via a + Resource State Coordinator (RSC) using command packets. The VRM allows + changing three parameters for a given regulator, enable state, output + voltage, and operating mode. The XOB allows changing only a single + parameter for a given regulator, its enable state. Despite its name, + the XOB is capable of controlling the enable state of any PMIC peripheral. + It is used for clock buffers, low-voltage switches, and LDO/SMPS regulators + which have a fixed voltage and mode. + + ======================= + Required Node Structure + ======================= + + RPMh regulators must be described in two levels of device nodes. The first + level describes the PMIC containing the regulators and must reside within an + RPMh device node. The second level describes each regulator within the PMIC + which is to be used on the board. Each of these regulators maps to a single + RPMh resource. + + The names used for regulator nodes must match those supported by a given + PMIC. Supported regulator node names are + For PM6150, smps1 - smps5, ldo1 - ldo19 + For PM6150L, smps1 - smps8, ldo1 - ldo11, bob + For PM6350, smps1 - smps5, ldo1 - ldo22 + For PM660, smps1 - smps6, ldo1 - ldo3, ldo5 - ldo19 + For PM660L, smps1 - smps3, smps5, ldo1 - ldo8, bob + For PM7325, smps1 - smps8, ldo1 - ldo19 + For PM8005, smps1 - smps4 + For PM8009, smps1 - smps2, ldo1 - ldo7 + For PM8150, smps1 - smps10, ldo1 - ldo18 + For PM8150L, smps1 - smps8, ldo1 - ldo11, bob, flash, rgb + For PM8350, smps1 - smps12, ldo1 - ldo10 + For PM8350C, smps1 - smps10, ldo1 - ldo13, bob + For PM8450, smps1 - smps6, ldo1 - ldo4 + For PM8550, smps1 - smps6, ldo1 - ldo17, bob1 - bob2 + For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 + For PMI8998, bob + For PMR735A, smps1 - smps3, ldo1 - ldo7 + For PMX55, smps1 - smps7, ldo1 - ldo16 + For PMX65, smps1 - smps8, ldo1 - ldo21 + For PMX75, smps1 - smps10, ldo1 - ldo21 + +properties: + compatible: + enum: + - qcom,pm6150-rpmh-regulators + - qcom,pm6150l-rpmh-regulators + - qcom,pm6350-rpmh-regulators + - qcom,pm660-rpmh-regulators + - qcom,pm660l-rpmh-regulators + - qcom,pm7325-rpmh-regulators + - qcom,pm8005-rpmh-regulators + - qcom,pm8009-rpmh-regulators + - qcom,pm8009-1-rpmh-regulators + - qcom,pm8150-rpmh-regulators + - qcom,pm8150l-rpmh-regulators + - qcom,pm8350-rpmh-regulators + - qcom,pm8350c-rpmh-regulators + - qcom,pm8450-rpmh-regulators + - qcom,pm8550-rpmh-regulators + - qcom,pm8550ve-rpmh-regulators + - qcom,pm8550vs-rpmh-regulators + - qcom,pm8998-rpmh-regulators + - qcom,pmc8180-rpmh-regulators + - qcom,pmc8180c-rpmh-regulators + - qcom,pmg1110-rpmh-regulators + - qcom,pmi8998-rpmh-regulators + - qcom,pmm8155au-rpmh-regulators + - qcom,pmm8654au-rpmh-regulators + - qcom,pmr735a-rpmh-regulators + - qcom,pmx55-rpmh-regulators + - qcom,pmx65-rpmh-regulators + - qcom,pmx75-rpmh-regulators + + qcom,pmic-id: + description: | + RPMh resource name suffix used for the regulators found + on this PMIC. + $ref: /schemas/types.yaml#/definitions/string + enum: [a, b, c, d, e, f, g, h, i, j, k, l, m, n] + + qcom,always-wait-for-ack: + description: | + Boolean flag which indicates that the application processor + must wait for an ACK or a NACK from RPMh for every request + sent for this regulator including those which are for a + strictly lower power state. + $ref: /schemas/types.yaml#/definitions/flag + + vdd-flash-supply: + description: Input supply phandle of flash. + + vdd-rgb-supply: + description: Input supply phandle of rgb. + + bob: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: BOB regulator node. + dependencies: + regulator-allow-set-load: [ regulator-allowed-modes ] + +patternProperties: + "^(smps|ldo|lvs|bob)[0-9]+$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: smps/ldo regulator nodes(s). + dependencies: + regulator-allow-set-load: [ regulator-allowed-modes ] + +required: + - compatible + - qcom,pmic-id + +allOf: + - if: + properties: + compatible: + enum: + - qcom,pm6150-rpmh-regulators + then: + properties: + vdd-l2-l3-supply: true + vdd-l4-l7-l8-supply: true + vdd-l5-l16-l17-l18-l19-supply: true + vdd-l10-l14-l15-supply: true + vdd-l11-l12-l13-supply: true + patternProperties: + "^vdd-l[169]-supply$": true + "^vdd-s[1-5]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm6150l-rpmh-regulators + - qcom,pm8150l-rpmh-regulators + - qcom,pmc8180c-rpmh-regulators + then: + properties: + vdd-bob-supply: + description: BOB regulator parent supply phandle. + vdd-l1-l8-supply: true + vdd-l2-l3-supply: true + vdd-l4-l5-l6-supply: true + vdd-l7-l11-supply: true + vdd-l9-l10-supply: true + patternProperties: + "^vdd-s[1-8]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm660-rpmh-regulators + then: + properties: + vdd-l1-l6-l7-supply: true + vdd-l2-l3-supply: true + vdd-l5-supply: true + vdd-l8-l9-l10-l11-l12-l13-l14-supply: true + vdd-l15-l16-l17-l18-l19-supply: true + patternProperties: + "^vdd-s[1-6]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm660l-rpmh-regulators + then: + properties: + vdd-bob-supply: + description: BOB regulator parent supply phandle. + vdd-l1-l9-l10-supply: true + vdd-l2-supply: true + vdd-l3-l5-l7-l8-supply: true + vdd-l4-l6-supply: true + vdd-s3-s4-supply: true + patternProperties: + "^vdd-s[125]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm7325-rpmh-regulators + then: + properties: + vdd-l1-l4-l12-l15-supply: true + vdd-l2-l7-supply: true + vdd-l6-l9-l10-supply: true + vdd-l11-l17-l18-l19-supply: true + vdd-l13-supply: true + vdd-l14-l16-supply: true + patternProperties: + "^vdd-l[358]-supply$": true + "^vdd-s[1-8]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8005-rpmh-regulators + then: + patternProperties: + "^vdd-s[1-4]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8009-rpmh-regulators + - qcom,pm8009-1-rpmh-regulators + then: + properties: + vdd-l5-l6-supply: true + patternProperties: + "^vdd-l[1-47]-supply$": true + "^vdd-s[1-2]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8150-rpmh-regulators + - qcom,pmc8180-rpmh-regulators + - qcom,pmm8155au-rpmh-regulators + then: + properties: + vdd-l1-l8-l11-supply: true + vdd-l2-l10-supply: true + vdd-l3-l4-l5-l18-supply: true + vdd-l6-l9-supply: true + vdd-l7-l12-l14-l15-supply: true + vdd-l13-l16-l17-supply: true + patternProperties: + "^vdd-s([1-9]|10)-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pmm8654au-rpmh-regulators + then: + properties: + vdd-l1-supply: true + vdd-l2-l3-supply: true + vdd-l4-supply: true + vdd-l5-supply: true + vdd-l6-l7-supply: true + vdd-l8-l9-supply: true + patternProperties: + "^vdd-s[1-9]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8350-rpmh-regulators + then: + properties: + vdd-l1-l4-supply: true + vdd-l2-l7-supply: true + vdd-l3-l5-supply: true + vdd-l6-l9-l10-supply: true + vdd-l8-supply: true + patternProperties: + "^vdd-s([1-9]|1[0-2])-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8350c-rpmh-regulators + then: + properties: + vdd-bob-supply: + description: BOB regulator parent supply phandle. + vdd-l1-l12-supply: true + vdd-l2-l8-supply: true + vdd-l3-l4-l5-l7-l13-supply: true + vdd-l6-l9-l11-supply: true + vdd-l10-supply: true + patternProperties: + "^vdd-s([1-9]|10)-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8450-rpmh-regulators + then: + patternProperties: + "^vdd-l[1-4]-supply$": true + "^vdd-s[1-6]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8550-rpmh-regulators + then: + properties: + vdd-l1-l4-l10-supply: true + vdd-l2-l13-l14-supply: true + vdd-l5-l16-supply: true + vdd-l6-l7-supply: true + vdd-l8-l9-supply: true + patternProperties: + "^vdd-l(3|1[1-7])-supply$": true + "^vdd-s[1-6]-supply$": true + "^vdd-bob[1-2]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8550ve-rpmh-regulators + - qcom,pm8550vs-rpmh-regulators + then: + patternProperties: + "^vdd-l[1-3]-supply$": true + "^vdd-s[1-6]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8998-rpmh-regulators + then: + properties: + vdd-l1-l27-supply: true + vdd-l2-l8-l17-supply: true + vdd-l3-l11-supply: true + vdd-l4-l5-supply: true + vdd-l6-supply: true + vdd-l7-l12-l14-l15-supply: true + vdd-l9-supply: true + vdd-l10-l23-l25-supply: true + vdd-l13-l19-l21-supply: true + vdd-l16-l28-supply: true + vdd-l18-l22-supply: true + vdd-l20-l24-supply: true + vdd-l26-supply: true + vin-lvs-1-2-supply: true + patternProperties: + "^vdd-s([1-9]|1[0-3])-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pmg1110-rpmh-regulators + then: + properties: + vdd-s1-supply: true + + - if: + properties: + compatible: + enum: + - qcom,pmi8998-rpmh-regulators + then: + properties: + vdd-bob-supply: + description: BOB regulator parent supply phandle. + + - if: + properties: + compatible: + enum: + - qcom,pmr735a-rpmh-regulators + then: + properties: + vdd-l1-l2-supply: true + vdd-l3-supply: true + vdd-l4-supply: true + vdd-l5-l6-supply: true + vdd-l7-bob-supply: true + patternProperties: + "^vdd-s[1-3]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pmx55-rpmh-regulators + then: + properties: + vdd-l1-l2-supply: true + vdd-l3-l9-supply: true + vdd-l4-l12-supply: true + vdd-l5-l6-supply: true + vdd-l7-l8-supply: true + vdd-l10-l11-l13-supply: true + patternProperties: + "^vdd-l1[4-6]-supply$": true + "^vdd-s[1-7]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pmx65-rpmh-regulators + then: + properties: + vdd-l2-l18-supply: true + vdd-l5-l6-l16-supply: true + vdd-l8-l9-supply: true + vdd-l11-l13-supply: true + patternProperties: + "^vdd-l[1347]-supply$": true + "^vdd-l1[024579]-supply$": true + "^vdd-l2[01]-supply$": true + "^vdd-s[1-8]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pmx75-rpmh-regulators + then: + properties: + vdd-l2-l18-supply: true + vdd-l4-l16-supply: true + vdd-l5-l6-supply: true + vdd-l8-l9-supply: true + vdd-l11-l13-supply: true + vdd-l20-l21-supply: true + patternProperties: + "^vdd-l[137]-supply$": true + "^vdd-l1[024579]-supply$": true + "^vdd-s([1-9]|10)-supply$": true + +unevaluatedProperties: false + +examples: + - | + #include + + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-l7-l12-l14-l15-supply = <&pm8998_s5>; + + smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allowed-modes = ; + regulator-allow-set-load; + }; + + lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + regulator-initial-mode = ; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml new file mode 100644 index 0000000000..f02f97d4fd --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,sdm845-refgen-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. REFGEN Regulator + +maintainers: + - Konrad Dybcio + +description: + The REFGEN (reference voltage generator) regulator provides reference + voltage for on-chip IPs (like PHYs) on some Qualcomm SoCs. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,sc7180-refgen-regulator + - qcom,sc8180x-refgen-regulator + - qcom,sm8150-refgen-regulator + - const: qcom,sdm845-refgen-regulator + + - items: + - enum: + - qcom,sc7280-refgen-regulator + - qcom,sc8280xp-refgen-regulator + - qcom,sm6350-refgen-regulator + - qcom,sm6375-refgen-regulator + - qcom,sm8350-refgen-regulator + - const: qcom,sm8250-refgen-regulator + + - enum: + - qcom,sdm845-refgen-regulator + - qcom,sm8250-refgen-regulator + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + regulator@162f000 { + compatible = "qcom,sm8250-refgen-regulator"; + reg = <0x0162f000 0x84>; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml new file mode 100644 index 0000000000..9ea8ac0786 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,smd-rpm-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QCOM SMD RPM REGULATOR + +description: + The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM. + Because SMD is used as the communication transport mechanism, the RPM + resides as a subnode of the SMD. As such, the SMD-RPM regulator requires + that the SMD and RPM nodes be present. + + Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml for + information pertaining to the SMD node. + + Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml + for information regarding the RPM node. + + The regulator node houses sub-nodes for each regulator within the device. + Each sub-node is identified using the node's name, with valid values listed + for each of the pmics below. + + For mp5496, s1, s2 + + For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22 + + For pm6125 s1, s2, s3, s4, s5, s6, s7, s8, l1, l2, l3, l5, l6, l7, l8, l9, + l10, l22, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24 + + For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22, + l12, l13, l14, l15, l16, l17, l18, l19 + + For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob + + For pm8226, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, + l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, + l26, l27, l28, lvs1 + + For pm8841, s1, s2, s3, s4, s5, s6, s7, s8 + + For pm8909, s1, s2, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, + l14, l15, l17, l18 + + For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l13, l14, l15, l16, l17, l18 + + For pm8941, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, + lvs3, 5vs1, 5vs2 + + For pm8950 and pm8953, s1, s2, s3, s4, s5, s6, s7, l1, l2, l3, l4, l5, l6, + l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, + l23 + + For pm8994, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, + l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, + l20, l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2 + + For pm8998, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, l1, l2, + l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, + l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2 + + For pma8084, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, + l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, + l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 + + For pmi8994, s1, s2, s3, boost-bypass + + For pmi8998, bob + + For pmr735a, s1, s2, s3, l1, l2, l3, l4, l5, l6, l7 + + For pms405, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l13 + +maintainers: + - Andy Gross + - Bjorn Andersson + +properties: + compatible: + enum: + - qcom,rpm-mp5496-regulators + - qcom,rpm-pm2250-regulators + - qcom,rpm-pm6125-regulators + - qcom,rpm-pm660-regulators + - qcom,rpm-pm660l-regulators + - qcom,rpm-pm8226-regulators + - qcom,rpm-pm8841-regulators + - qcom,rpm-pm8909-regulators + - qcom,rpm-pm8916-regulators + - qcom,rpm-pm8941-regulators + - qcom,rpm-pm8950-regulators + - qcom,rpm-pm8953-regulators + - qcom,rpm-pm8994-regulators + - qcom,rpm-pm8998-regulators + - qcom,rpm-pma8084-regulators + - qcom,rpm-pmi8994-regulators + - qcom,rpm-pmi8998-regulators + - qcom,rpm-pmr735a-regulators + - qcom,rpm-pms405-regulators + +patternProperties: + ".*-supply$": + description: Input supply phandle(s) for this node + + "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$": + description: List of regulators and its properties + $ref: regulator.yaml# + unevaluatedProperties: false + +additionalProperties: false + +required: + - compatible + +examples: + - | + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + vdd_l13_l20_l23_l24-supply = <&pm8941_boost>; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_boost: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml new file mode 100644 index 0000000000..bdf34c2de9 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml @@ -0,0 +1,354 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,spmi-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SPMI Regulators + +maintainers: + - Robert Marko + +properties: + compatible: + enum: + - qcom,pm6125-regulators + - qcom,pm660-regulators + - qcom,pm660l-regulators + - qcom,pm8004-regulators + - qcom,pm8005-regulators + - qcom,pm8226-regulators + - qcom,pm8841-regulators + - qcom,pm8916-regulators + - qcom,pm8941-regulators + - qcom,pm8950-regulators + - qcom,pm8994-regulators + - qcom,pmi8994-regulators + - qcom,pmp8074-regulators + - qcom,pms405-regulators + + qcom,saw-reg: + description: Reference to syscon node defining the SAW registers + $ref: /schemas/types.yaml#/definitions/phandle + +patternProperties: + "^(5vs[1-2]|(l|s)[1-9][0-9]?|lvs[1-3])$": + description: List of regulators and its properties + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + + properties: + qcom,ocp-max-retries: + description: + Maximum number of times to try toggling a voltage switch off and + back on as a result of consecutive over current events + $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,ocp-retry-delay: + description: + Time to delay in milliseconds between each voltage switch toggle + after an over current event takes place + $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,pin-ctrl-enable: + description: + Bit mask specifying which hardware pins should be used to enable the + regulator, if any. + Supported bits are + 0 = ignore all hardware enable signals + BIT(0) = follow HW0_EN signal + BIT(1) = follow HW1_EN signal + BIT(2) = follow HW2_EN signal + BIT(3) = follow HW3_EN signal + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + qcom,pin-ctrl-hpm: + description: + Bit mask specifying which hardware pins should be used to force the + regulator into high power mode, if any. + Supported bits are + 0 = ignore all hardware enable signals + BIT(0) = follow HW0_EN signal + BIT(1) = follow HW1_EN signal + BIT(2) = follow HW2_EN signal + BIT(3) = follow HW3_EN signal + BIT(4) = follow PMIC awake state + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + + qcom,vs-soft-start-strength: + description: + This property sets the soft start strength for voltage switch type + regulators. + Supported values are + 0 = 0.05 uA + 1 = 0.25 uA + 2 = 0.55 uA + 3 = 0.75 uA + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + + qcom,saw-slave: + description: SAW controlled gang slave. Will not be configured. + type: boolean + + qcom,saw-leader: + description: + SAW controlled gang leader. Will be configured as SAW regulator. + type: boolean + +required: + - compatible + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pm6125-regulators + then: + properties: + vdd_l1_l7_l17_l18-supply: true + vdd_l2_l3_l4-supply: true + vdd_l5_l15_l19_l20_l21_l22-supply: true + vdd_l6_l8-supply: true + vdd_l9_l11-supply: true + vdd_l10_l13_l14-supply: true + vdd_l12_l16-supply: true + vdd_l23_l24-supply: true + patternProperties: + "^vdd_s[1-8]-supply$": true + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm660-regulators + then: + properties: + vdd_l15_l16_l17_l18_l19-supply: true + vdd_l1_l6_l7-supply: true + vdd_l2_l3-supply: true + vdd_l5-supply: true + vdd_l8_l9_l10_l11_l12_l13_l14-supply: true + patternProperties: + "^vdd_s[1-6]-supply$": true + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm660l-regulators + then: + properties: + vdd_l1_l9_l10-supply: true + vdd_l2-supply: true + vdd_l3_l5_l7_l8-supply: true + vdd_l4_l6-supply: true + patternProperties: + "^vdd_s[1-5]-supply$": true + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8004-regulators + then: + patternProperties: + "^vdd_s[25]-supply$": true + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8005-regulators + then: + patternProperties: + "^vdd_s[1-4]-supply$": true + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8226-regulators + then: + properties: + vdd_l10_l11_l13-supply: true + vdd_l12_l14-supply: true + vdd_l15_l16_l17_l18-supply: true + vdd_l19_l20_l21_l22_l23_l28-supply: true + vdd_l1_l2_l4_l5-supply: true + vdd_l25-supply: true + vdd_l3_l24_l26-supply: true + vdd_l6_l7_l8_l9_l27-supply: true + vdd_lvs1-supply: true + patternProperties: + "^vdd_s[1-5]-supply$": true + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8841-regulators + then: + patternProperties: + "^vdd_s[1-8]-supply$": true + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8916-regulators + then: + properties: + vdd_l1_l3-supply: true + vdd_l4_l5_l6-supply: true + vdd_l8_l11_l14_l15_l16-supply: true + vdd_l9_l10_l12_l13_l17_l18-supply: true + patternProperties: + "^vdd_l[27]-supply$": true + "^vdd_s[1-4]-supply$": true + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8941-regulators + then: + properties: + interrupts: + items: + - description: Over-current protection interrupt for 5V S1 + - description: Over-current protection interrupt for 5V S2 + interrupt-names: + items: + - const: ocp-5vs1 + - const: ocp-5vs2 + vdd_l13_l20_l23_l24-supply: true + vdd_l1_l3-supply: true + vdd_l21-supply: true + vdd_l2_lvs_1_2_3-supply: true + vdd_l4_l11-supply: true + vdd_l5_l7-supply: true + vdd_l6_l12_l14_l15-supply: true + vdd_l8_l16_l18_19-supply: true + vdd_l9_l10_l17_l22-supply: true + vin_5vs-supply: true + patternProperties: + "^vdd_s[1-3]-supply$": true + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8950-regulators + then: + properties: + vdd_l1_l19-supply: true + vdd_l20-supply: true + vdd_l21-supply: true + vdd_l2_l23-supply: true + vdd_l3-supply: true + vdd_l4_l5_l6_l7_l16-supply: true + vdd_l8_l11_l12_l17_l22-supply: true + vdd_l9_l10_l13_l14_l15_l18-supply: true + patternProperties: + "^vdd_s[1-6]-supply$": true + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8994-regulators + then: + properties: + vdd_l1-supply: true + vdd_l13_l19_l23_l24-supply: true + vdd_l14_l15-supply: true + vdd_l17_l29-supply: true + vdd_l20_l21-supply: true + vdd_l25-supply: true + vdd_l2_l26_l28-supply: true + vdd_l3_l11-supply: true + vdd_l4_l27_l31-supply: true + vdd_l5_l7-supply: true + vdd_l6_l12_l32-supply: true + vdd_l8_l16_l30-supply: true + vdd_l9_l10_l18_l22-supply: true + vdd_lvs_1_2-supply: true + patternProperties: + "^vdd_s[1-9][0-2]?-supply$": true + + - if: + properties: + compatible: + contains: + enum: + - qcom,pmi8994-regulators + then: + properties: + vdd_l1-supply: true + patternProperties: + "^vdd_s[1-3]-supply$": true + + - if: + properties: + compatible: + contains: + enum: + - qcom,pmp8074-regulators + then: + properties: + vdd_l10_l11_l12_l13-supply: true + vdd_l1_l2-supply: true + vdd_l3_l8-supply: true + vdd_l5_l6_l15-supply: true + patternProperties: + "^vdd_l[479]-supply$": true + "^vdd_s[1-5]-supply$": true + + - if: + properties: + compatible: + contains: + enum: + - qcom,pms405-regulators + then: + properties: + vdd_s3-supply: true + +unevaluatedProperties: false + +examples: + - | + regulators { + compatible = "qcom,pm8941-regulators"; + vdd_l1_l3-supply = <&s1>; + + s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1400000>; + }; + + l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml new file mode 100644 index 0000000000..89c564dfa5 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,usb-vbus-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The Qualcomm PMIC VBUS output regulator driver + +maintainers: + - Wesley Cheng + +description: | + This regulator driver controls the VBUS output by the Qualcomm PMIC. This + regulator will be enabled in situations where the device is required to + provide power to the connected peripheral. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - qcom,pm8150b-vbus-reg + + reg: + maxItems: 1 + description: VBUS output base address + +required: + - compatible + - reg + - regulator-min-microamp + - regulator-max-microamp + +unevaluatedProperties: false + +examples: + - | + pm8150b { + #address-cells = <1>; + #size-cells = <0>; + pm8150b_vbus: usb-vbus-regulator@1100 { + compatible = "qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml new file mode 100644 index 0000000000..e987c39b22 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom-labibb-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm's LAB(LCD AMOLED Boost)/IBB(Inverting Buck Boost) Regulator + +maintainers: + - Sumit Semwal + +description: + LAB can be used as a positive boost power supply and IBB can be used as a + negative boost power supply for display panels. Currently implemented for + pmi8998. + +properties: + compatible: + const: qcom,pmi8998-lab-ibb + + lab: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + + properties: + qcom,soft-start-us: + description: Regulator soft start time in microseconds. + enum: [200, 400, 600, 800] + default: 200 + + interrupts: + minItems: 1 + maxItems: 2 + description: + Short-circuit and over-current interrupts for lab. + + interrupt-names: + minItems: 1 + items: + - const: sc-err + - const: ocp + + required: + - interrupts + - interrupt-names + + ibb: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + + properties: + qcom,discharge-resistor-kohms: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Discharge resistor value in KiloOhms. + enum: [300, 64, 32, 16] + default: 300 + + interrupts: + minItems: 1 + maxItems: 2 + description: + Short-circuit and over-current interrupts for ibb. + + interrupt-names: + minItems: 1 + items: + - const: sc-err + - const: ocp + + required: + - interrupts + - interrupt-names + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include + + labibb { + compatible = "qcom,pmi8998-lab-ibb"; + + lab { + interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sc-err", "ocp"; + }; + + ibb { + interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>, + <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sc-err", "ocp"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml new file mode 100644 index 0000000000..41678400e6 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RaspberryPi 7" display ATTINY88-based regulator/backlight controller + +maintainers: + - Marek Vasut + +description: | + The RaspberryPi 7" display has an ATTINY88-based regulator/backlight + controller on the PCB, which is used to turn the display unit on/off + and control the backlight. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + const: raspberrypi,7inch-touchscreen-panel-regulator + + reg: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@45 { + compatible = "raspberrypi,7inch-touchscreen-panel-regulator"; + reg = <0x45>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt new file mode 100644 index 0000000000..bcf788897e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt @@ -0,0 +1,222 @@ +Regulator DT binding for MAX77620 Power management IC from Maxim Semiconductor. + +Device has multiple DCDC(sd[0-3] and LDOs(ldo[0-8]). The input supply +of these regulators are defined under parent device node. +Details of regulator properties are defined as child node under +sub-node "regulators" which is child node of device node. + +Please refer file +for common regulator bindings used by client. + +Following are properties of parent node related to regulators. + +Optional properties: +------------------- +The input supply of regulators are the optional properties on the +parent device node. The input supply of these regulators are provided +through following properties: +in-sd0-supply: Input supply for SD0, INA-SD0 or INB-SD0 pins. +in-sd1-supply: Input supply for SD1. +in-sd2-supply: Input supply for SD2. +in-sd3-supply: Input supply for SD3. +in-ldo0-1-supply: Input supply for LDO0 and LDO1. +in-ldo2-supply: Input supply for LDO2. +in-ldo3-5-supply: Input supply for LDO3 and LDO5 +in-ldo4-6-supply: Input supply for LDO4 and LDO6. +in-ldo7-8-supply: Input supply for LDO7 and LDO8. + +Optional sub nodes for regulators under "regulators" subnode: +------------------------------------------------------------ +The subnodes name is the name of regulator and it must be one of: + sd[0-3], ldo[0-8] + +Each sub-node should contain the constraints and initialization +information for that regulator. The definition for each of these +nodes is defined using the standard binding for regulators found at +. + +There are also additional properties for SD/LDOs. These additional properties +are required to configure FPS configuration parameters for SDs and LDOs. +Please refer for more detail of Flexible +Power Sequence (FPS). +Following are additional properties: + +- maxim,active-fps-source: FPS source for the regulators to get + enabled/disabled when system is in + active state. Valid values are: + - MAX77620_FPS_SRC_0, + FPS source is FPS0. + - MAX77620_FPS_SRC_1, + FPS source is FPS1 + - MAX77620_FPS_SRC_2 and + FPS source is FPS2 + - MAX77620_FPS_SRC_NONE. + Regulator is not controlled + by FPS events and it gets + enabled/disabled by register + access. + Absence of this property will leave + the FPS configuration register for that + regulator to default configuration. + +- maxim,active-fps-power-up-slot: Sequencing event slot number on which + the regulator get enabled when + master FPS input event set to HIGH. + Valid values are 0 to 7. + This is applicable if FPS source is + selected as FPS0, FPS1 or FPS2. + +- maxim,active-fps-power-down-slot: Sequencing event slot number on which + the regulator get disabled when master + FPS input event set to LOW. + Valid values are 0 to 7. + This is applicable if FPS source is + selected as FPS0, FPS1 or FPS2. + +- maxim,suspend-fps-source: This is same as property + "maxim,active-fps-source" but value + get configured when system enters in + to suspend state. + +- maxim,suspend-fps-power-up-slot: This is same as property + "maxim,active-fps-power-up-slot" but + this value get configured into FPS + configuration register when system + enters into suspend. + This is applicable if suspend state + FPS source is selected as FPS0, FPS1 or + +- maxim,suspend-fps-power-down-slot: This is same as property + "maxim,active-fps-power-down-slot" but + this value get configured into FPS + configuration register when system + enters into suspend. + This is applicable if suspend state + FPS source is selected as FPS0, FPS1 or + FPS2. +- maxim,ramp-rate-setting: integer, ramp rate(uV/us) setting to be + configured to the device. + The platform may have different ramp + rate than advertised ramp rate if it has + design variation from Maxim's + recommended. On this case, platform + specific ramp rate is used for ramp time + calculation and this property is used + for device register configurations. + The measured ramp rate of platform is + provided by the regulator-ramp-delay + as described in . + Maxim Max77620 supports following ramp + delay: + SD: 13.75mV/us, 27.5mV/us, 55mV/us + LDOs: 5mV/us, 100mV/us + +Note: If the measured ramp delay is same as advertised ramp delay then it is not +required to provide the ramp delay with property "maxim,ramp-rate-setting". The +ramp rate can be provided by the regulator-ramp-delay which will be used for +ramp time calculation for voltage change as well as for device configuration. + +Example: +-------- +#include +... +max77620@3c { + in-ldo0-1-supply = <&max77620_sd2>; + in-ldo7-8-supply = <&max77620_sd2>; + regulators { + sd0 { + regulator-name = "vdd-core"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + maxim,active-fps-source = ; + }; + + sd1 { + regulator-name = "vddio-ddr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + maxim,active-fps-source = ; + }; + + sd2 { + regulator-name = "vdd-pre-reg"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + }; + + sd3 { + regulator-name = "vdd-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo0 { + regulator-name = "avdd-sys"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1 { + regulator-name = "vdd-pex"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo2 { + regulator-name = "vddio-sdmmc3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3 { + regulator-name = "vdd-cam-hv"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo4 { + regulator-name = "vdd-rtc"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5 { + regulator-name = "avdd-ts-hv"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo6 { + regulator-name = "vdd-ts"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7 { + regulator-name = "vdd-gen-pll-edp"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo8 { + regulator-name = "vdd-hdmi-dp"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/regulator-output.yaml b/Documentation/devicetree/bindings/regulator/regulator-output.yaml new file mode 100644 index 0000000000..078b37a1a7 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/regulator-output.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/regulator/regulator-output.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator output connector + +maintainers: + - Zev Weiss + +description: | + This describes a power output connector supplied by a regulator, + such as a power outlet on a power distribution unit (PDU). The + connector may be standalone or merely one channel or set of pins + within a ganged physical connector carrying multiple independent + power outputs. + +properties: + compatible: + const: regulator-output + + vout-supply: + description: + Phandle of the regulator supplying the output. + +required: + - compatible + - vout-supply + +additionalProperties: false + +examples: + - | + output { + compatible = "regulator-output"; + vout-supply = <&output_reg>; + }; diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt new file mode 100644 index 0000000000..487ccd8370 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -0,0 +1 @@ +This file has moved to regulator.yaml. diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml new file mode 100644 index 0000000000..9daf0fc246 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -0,0 +1,291 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Voltage/Current Regulators + +maintainers: + - Liam Girdwood + - Mark Brown + +properties: + regulator-name: + description: A string used as a descriptive name for regulator outputs + $ref: /schemas/types.yaml#/definitions/string + + regulator-min-microvolt: + description: smallest voltage consumers may set + + regulator-max-microvolt: + description: largest voltage consumers may set + + regulator-microvolt-offset: + description: Offset applied to voltages to compensate for voltage drops + $ref: /schemas/types.yaml#/definitions/uint32 + + regulator-min-microamp: + description: smallest current consumers may set + + regulator-max-microamp: + description: largest current consumers may set + + regulator-input-current-limit-microamp: + description: maximum input current regulator allows + + regulator-always-on: + description: boolean, regulator should never be disabled + type: boolean + + regulator-boot-on: + description: bootloader/firmware enabled regulator. + It's expected that this regulator was left on by the bootloader. + If the bootloader didn't leave it on then OS should turn it on + at boot but shouldn't prevent it from being turned off later. + This property is intended to only be used for regulators where + software cannot read the state of the regulator. + type: boolean + + regulator-allow-bypass: + description: allow the regulator to go into bypass mode + type: boolean + + regulator-allow-set-load: + description: allow the regulator performance level to be configured + type: boolean + + regulator-ramp-delay: + description: ramp delay for regulator(in uV/us) For hardware which supports + disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay + = <0>) for disabling ramp delay. + $ref: /schemas/types.yaml#/definitions/uint32 + + regulator-enable-ramp-delay: + description: The time taken, in microseconds, for the supply rail to + reach the target voltage, plus/minus whatever tolerance the board + design requires. This property describes the total system ramp time + required due to the combination of internal ramping of the regulator + itself, and board design issues such as trace capacitance and load + on the supply. + $ref: /schemas/types.yaml#/definitions/uint32 + + regulator-settling-time-us: + description: Settling time, in microseconds, for voltage change if regulator + have the constant time for any level voltage change. This is useful + when regulator have exponential voltage change. + + regulator-settling-time-up-us: + description: Settling time, in microseconds, for voltage increase if + the regulator needs a constant time to settle after voltage increases + of any level. This is useful for regulators with exponential voltage + changes. + + regulator-settling-time-down-us: + description: Settling time, in microseconds, for voltage decrease if + the regulator needs a constant time to settle after voltage decreases + of any level. This is useful for regulators with exponential voltage + changes. + + regulator-soft-start: + description: Enable soft start so that voltage ramps slowly + type: boolean + + regulator-initial-mode: + description: initial operating mode. The set of possible operating modes + depends on the capabilities of every hardware so each device binding + documentation explains which values the regulator supports. + $ref: /schemas/types.yaml#/definitions/uint32 + + regulator-allowed-modes: + description: list of operating modes that software is allowed to configure + for the regulator at run-time. Elements may be specified in any order. + The set of possible operating modes depends on the capabilities of + every hardware so each device binding document explains which values + the regulator supports. + $ref: /schemas/types.yaml#/definitions/uint32-array + + regulator-system-load: + description: Load in uA present on regulator that is not captured by + any consumer request. + $ref: /schemas/types.yaml#/definitions/uint32 + + regulator-pull-down: + description: Enable pull down resistor when the regulator is disabled. + type: boolean + + regulator-over-current-protection: + description: Enable over current protection. + type: boolean + + regulator-oc-protection-microamp: + description: Set over current protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. + + regulator-oc-error-microamp: + description: Set over current error limit. This is a limit where part of + the hardware probably is malfunctional and damage prevention is requested. + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. + + regulator-oc-warn-microamp: + description: Set over current warning limit. This is a limit where hardware + is assumed still to be functional but approaching limit where it gets + damaged. Recovery actions should be initiated. Zero can be passed to + disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. + + regulator-ov-protection-microvolt: + description: Set over voltage protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. Limit is given as microvolt offset from + voltage set to regulator. + + regulator-ov-error-microvolt: + description: Set over voltage error limit. This is a limit where part of + the hardware probably is malfunctional and damage prevention is requested + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. Limit + is given as microvolt offset from voltage set to regulator. + + regulator-ov-warn-microvolt: + description: Set over voltage warning limit. This is a limit where hardware + is assumed still to be functional but approaching limit where it gets + damaged. Recovery actions should be initiated. Zero can be passed to + disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. Limit is given as microvolt + offset from voltage set to regulator. + + regulator-uv-protection-microvolt: + description: Set over under voltage protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. Limit is given as microvolt offset from + voltage set to regulator. + + regulator-uv-error-microvolt: + description: Set under voltage error limit. This is a limit where part of + the hardware probably is malfunctional and damage prevention is requested + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. Limit + is given as microvolt offset from voltage set to regulator. + + regulator-uv-warn-microvolt: + description: Set over under voltage warning limit. This is a limit where + hardware is assumed still to be functional but approaching limit where + it gets damaged. Recovery actions should be initiated. Zero can be passed + to disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. Limit is given as microvolt + offset from voltage set to regulator. + + regulator-temp-protection-kelvin: + description: Set over temperature protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. + + regulator-temp-error-kelvin: + description: Set over temperature error limit. This is a limit where part of + the hardware probably is malfunctional and damage prevention is requested + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. + + regulator-temp-warn-kelvin: + description: Set over temperature warning limit. This is a limit where + hardware is assumed still to be functional but approaching limit where it + gets damaged. Recovery actions should be initiated. Zero can be passed to + disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. + + regulator-active-discharge: + description: | + tristate, enable/disable active discharge of regulators. The values are: + 0: Disable active discharge. + 1: Enable active discharge. + Absence of this property will leave configuration to default. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + regulator-coupled-with: + description: Regulators with which the regulator is coupled. The linkage + is 2-way - all coupled regulators should be linked with each other. + A regulator should not be coupled with its supplier. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + + regulator-coupled-max-spread: + description: Array of maximum spread between voltages of coupled regulators + in microvolts, each value in the array relates to the corresponding + couple specified by the regulator-coupled-with property. + $ref: /schemas/types.yaml#/definitions/uint32-array + + regulator-max-step-microvolt: + description: Maximum difference between current and target voltages + that can be changed safely in a single step. + +patternProperties: + ".*-supply$": + description: Input supply phandle(s) for this node + + "^regulator-state-(standby|mem|disk)$": + type: object + description: + sub-nodes for regulator state in Standby, Suspend-to-RAM, and + Suspend-to-DISK modes. Equivalent with standby, mem, and disk Linux + sleep states. + + properties: + regulator-on-in-suspend: + description: regulator should be on in suspend state. + type: boolean + + regulator-off-in-suspend: + description: regulator should be off in suspend state. + type: boolean + + regulator-suspend-min-microvolt: + description: minimum voltage may be set in suspend state. + + regulator-suspend-max-microvolt: + description: maximum voltage may be set in suspend state. + + regulator-suspend-microvolt: + description: the default voltage which regulator would be set in + suspend. This property is now deprecated, instead setting voltage + for suspend mode via the API which regulator driver provides is + recommended. + + regulator-changeable-in-suspend: + description: whether the default voltage and the regulator on/off + in suspend can be changed in runtime. + type: boolean + + regulator-mode: + description: operating mode in the given suspend state. The set + of possible operating modes depends on the capabilities of every + hardware so the valid modes are documented on each regulator device + tree binding document. + $ref: /schemas/types.yaml#/definitions/uint32 + + additionalProperties: false + +additionalProperties: true + +examples: + - | + xyzreg: regulator { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + vin-supply = <&vin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml b/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml new file mode 100644 index 0000000000..97cff71d29 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/renesas,raa215300.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RAA215300 Power Management Integrated Circuit (PMIC) + +maintainers: + - Biju Das + +description: | + The RAA215300 is a high-performance, low-cost 9-channel PMIC designed for + 32-bit and 64-bit MCU and MPU applications. It supports DDR3, DDR3L, DDR4, + and LPDDR4 memory power requirements. The internally compensated regulators, + built-in Real-Time Clock (RTC), 32kHz crystal oscillator, and coin cell + battery charger provide a highly integrated, small footprint power solution + ideal for System-On-Module (SOM) applications. A spread spectrum feature + provides an ease-of-use solution for noise-sensitive audio or RF applications. + + This device exposes two devices via I2C. One for the integrated RTC IP, and + one for everything else. + + Link to datasheet: + https://www.renesas.com/in/en/products/power-power-management/multi-channel-power-management-ics-pmics/ssdsoc-power-management-ics-pmic-and-pmus/raa215300-high-performance-9-channel-pmic-supporting-ddr-memory-built-charger-and-rtc + +properties: + compatible: + enum: + - renesas,raa215300 + + reg: + maxItems: 2 + + reg-names: + items: + - const: main + - const: rtc + + interrupts: + maxItems: 1 + + clocks: + description: | + The clocks are optional. The RTC is disabled, if no clocks are + provided(either xin or clkin). + maxItems: 1 + + clock-names: + description: | + Use xin, if connected to an external crystal. + Use clkin, if connected to an external clock signal. + enum: + - xin + - clkin + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + /* 32.768kHz crystal */ + x2: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + raa215300: pmic@12 { + compatible = "renesas,raa215300"; + reg = <0x12>, <0x6f>; + reg-names = "main", "rtc"; + + clocks = <&x2>; + clock-names = "xin"; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml new file mode 100644 index 0000000000..4a8a221bc9 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt4801-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4801 Display Bias regulators + +maintainers: + - ChiYuan Huang + +description: | + Regulator nodes should be named to DSVP and DSVN. The + definition for each of these nodes is defined using the standard + binding for regulators at + Documentation/devicetree/bindings/regulator/regulator.txt. + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4801H/DS4801H-00.pdf + +properties: + compatible: + enum: + - richtek,rt4801 + + reg: + maxItems: 1 + + enable-gpios: + description: GPIOs to use to enable DSVP/DSVN regulator. + The first one is ENP to enable DSVP, and second one is ENM to enable DSVN. + Number of GPIO in the array list could be 1 or 2. + If only one gpio is specified, only one gpio used to control ENP/ENM. + Else if both are specified, DSVP/DSVN could be controlled individually. + If this property not specified, treat both as always-on regulators. + + Property is deprecated. Use enable-gpios in each regulator. + minItems: 1 + maxItems: 2 + deprecated: true + +patternProperties: + "^DSV(P|N)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single display bias regulator. + + properties: + enable-gpios: + description: + GPIO to use to enable DSVP/DSVN regulator. One GPIO can be configured + for controlling both regulators. If this property not specified for + any regulator, treat both as always-on regulators. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt4801@73 { + compatible = "richtek,rt4801"; + reg = <0x73>; + + dsvp: DSVP { + regulator-name = "rt4801,dsvp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + enable-gpios = <&gpio26 2 0>; + }; + dsvn: DSVN { + regulator-name = "rt4801,dsvn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + enable-gpios = <&gpio26 3 0>; + }; + + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4803.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4803.yaml new file mode 100644 index 0000000000..6ceba022e5 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt4803.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt4803.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4803 Boost Regulator + +maintainers: + - ChiYuan Huang + +description: | + RT4803 is a boost regulator that's designed to provide the minimum output + voltage, even if the input voltage is lower than the required voltage. It + supports boost and auto bypass mode that depends on the difference between the + input and output voltage. If the input is lower than the output, mode will + transform to boost mode. Otherwise, turn on bypass switch to enter bypass mode. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4803/DS4803-03.pdf + https://www.richtek.com/assets/product_file/RT4803A/DS4803A-06.pdf + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - richtek,rt4803 + + reg: + maxItems: 1 + + richtek,vsel-active-high: + type: boolean + description: Specify the VSEL register group is using when system is active + + regulator-allowed-modes: + description: | + Available operating mode + 1: Auto PFM/PWM + 2: Force PWM + items: + enum: [1, 2] + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@75 { + compatible = "richtek,rt4803"; + reg = <0x75>; + richtek,vsel-active-high; + regulator-name = "rt4803-regulator"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <4400000>; + regulator-allowed-modes = <1 2>; + regulator-always-on; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml new file mode 100644 index 0000000000..cd06e957b9 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt4831-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4831 Display Bias Voltage Regulator + +maintainers: + - ChiYuan Huang + +description: | + RT4831 is a multifunctional device that can provide power to the LCD display + and LCD backlight. + + For Display Bias Voltage DSVP and DSVN, the output range is about 4V to 6.5V. + It is sufficient to meet the current LCD power requirement. + + DSVLCM is a boost regulator in IC internal as DSVP and DSVN input power. + Its voltage should be configured above 0.15V to 0.2V gap larger than the + voltage needed for DSVP and DSVN. Too much voltage gap could improve the + voltage drop from the heavy loading scenario. But it also make the power + efficiency worse. It's a trade-off. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf + +patternProperties: + "^DSV(LCM|P|N)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single Display Bias Voltage regulator. + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml new file mode 100644 index 0000000000..89341fdaa3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt5190a-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5190A PMIC Regulator + +maintainers: + - ChiYuan Huang + +description: | + The RT5190A integrates 1 channel buck controller, 3 channels high efficiency + synchronous buck converters, 1 LDO, I2C control interface and peripheral + logical control. + + It also supports mute AC OFF depop sound and quick setting storage while + input power is removed. + +properties: + compatible: + enum: + - richtek,rt5190a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vin2-supply: + description: phandle to buck2 input voltage. + + vin3-supply: + description: phandle to buck3 input voltage. + + vin4-supply: + description: phandle to buck4 input voltage. + + vinldo-supply: + description: phandle to ldo input voltage + + richtek,mute-enable: + description: | + The mute function uses 'mutein', 'muteout', and 'vdet' pins as the control + signal. When enabled, The normal behavior is to bypass the 'mutein' signal + 'muteout'. But if the power source removal is detected from 'vdet', + whatever the 'mutein' signal is, it will pull down the 'muteout' to force + speakers mute. this function is commonly used to prevent the speaker pop + noise during AC power turned off in the modern TV system design. + type: boolean + + regulators: + type: object + + patternProperties: + "^buck[1-4]$|^ldo$": + type: object + $ref: regulator.yaml# + description: | + regulator description for buck1 to buck4, and ldo. + + properties: + regulator-allowed-modes: + description: | + buck operating mode, only buck1/4 support mode operating. + 0: auto mode + 1: force pwm mode + items: + enum: [0, 1] + + richtek,latchup-enable: + type: boolean + description: | + If specified, undervolt protection mode changes from the default + hiccup to latchup. + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@64 { + compatible = "richtek,rt5190a"; + reg = <0x64>; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + vin2-supply = <&rt5190_buck1>; + vin3-supply = <&rt5190_buck1>; + vin4-supply = <&rt5190_buck1>; + + regulators { + rt5190_buck1: buck1 { + regulator-name = "rt5190a-buck1"; + regulator-min-microvolt = <5090000>; + regulator-max-microvolt = <5090000>; + regulator-allowed-modes = ; + regulator-boot-on; + }; + buck2 { + regulator-name = "rt5190a-buck2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + }; + buck3 { + regulator-name = "rt5190a-buck3"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + }; + buck4 { + regulator-name = "rt5190a-buck4"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-allowed-modes = ; + regulator-boot-on; + }; + ldo { + regulator-name = "rt5190a-ldo"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml new file mode 100644 index 0000000000..e95e046e9e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt5739.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5739 Step-Down Buck Converter + +maintainers: + - ChiYuan Huang + +description: | + The RT5739 is a step-down switching buck converter that can deliver the + programmable output voltage from 300mV to 1300mV with wide input voltage + supply of 2.5V to 5.5V. It can provide up to 3.5A continuous current + capability at over 80% high efficiency. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - richtek,rt5733 + - richtek,rt5739 + + reg: + maxItems: 1 + + enable-gpios: + maxItems: 1 + + richtek,vsel-active-high: + description: | + If property is present, use the 'VSEL1' register group for buck control. + Else, use the 'VSEL0' register group. This depends on external hardware + 'VSEL' pin connection. + type: boolean + + regulator-allowed-modes: + description: | + buck allowed operating mode + 0: Auto PFM/PWM mode + 1: Forced PWM mode + items: + enum: [0, 1] + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@50 { + compatible = "richtek,rt5739"; + reg = <0x50>; + enable-gpios = <&gpio26 1 GPIO_ACTIVE_HIGH>; + richtek,vsel-active-high; + regulator-name = "richtek,rt5739-buck"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <0 1>; + regulator-boot-on; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5759-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5759-regulator.yaml new file mode 100644 index 0000000000..0a4c9576a4 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt5759-regulator.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt5759-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5759 High Performance DCDC Converter + +maintainers: + - ChiYuan Huang + +description: | + The RT5759 is a high-performance, synchronous step-down DC-DC converter that + can deliver up to 9A output current from 3V to 6.5V input supply, The output + voltage can be programmable with I2C controlled 7-Bit VID. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT5759/DS5759-00.pdf + +properties: + compatible: + enum: + - richtek,rt5759 + - richtek,rt5759a + + reg: + maxItems: 1 + + regulator-allowed-modes: + description: | + buck allowed operating mode + 0: auto mode (PSKIP: pulse skipping) + 1: force pwm mode + items: + enum: [0, 1] + + richtek,watchdog-enable: + description: enable the external watchdog reset pin listening + type: boolean + +allOf: + - $ref: regulator.yaml# + + - if: + properties: + compatible: + contains: + const: richtek,rt5759 + then: + properties: + richtek,watchdog-enable: false + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + # example 1 for RT5759 + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@62 { + compatible = "richtek,rt5759"; + reg = <0x62>; + regulator-name = "rt5759-buck"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + }; + }; + # example 2 for RT5759A + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@62 { + compatible = "richtek,rt5759a"; + reg = <0x62>; + regulator-name = "rt5759a-buck"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1725000>; + regulator-boot-on; + richtek,watchdog-enable; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml new file mode 100644 index 0000000000..0534b0d683 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt6160-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT6160 BuckBoost converter + +maintainers: + - ChiYuan Huang + +description: | + The RT6160 is a high-efficiency buck-boost converter that can provide + up to 3A output current from 2025mV to 5200mV. And it support the wide + input voltage range from 2200mV to 5500mV. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT6160A/DS6160A-00.pdf + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - richtek,rt6160 + + reg: + maxItems: 1 + + enable-gpios: + description: A connection of the 'enable' gpio line. + maxItems: 1 + + richtek,vsel-active-low: + description: | + Used to indicate the 'vsel' pin active level. if not specified, use + high active level as the default. + type: boolean + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt6160@75 { + compatible = "richtek,rt6160"; + reg = <0x75>; + enable-gpios = <&gpio26 2 0>; + regulator-name = "rt6160-buckboost"; + regulator-min-microvolt = <2025000>; + regulator-max-microvolt = <5200000>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml new file mode 100644 index 0000000000..29f7d3d5d6 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt6190.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT6190 4-Switch BuckBoost controller + +maintainers: + - ChiYuan Huang + +description: | + The RT6190 is 4-Switch BuckBoost controller designed for converting input + voltage to output voltage that can be equal to, higher or lower than input + voltage. It operates with wide input voltage range from 4.5V to 36V, and + the output voltage can be set from 3V to 36V by external FB pin. It's commonly + used for the application like as BuckBoost bus supply, docking station and USB + power delivery product. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT6190/DS6190-02.pdf + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - richtek,rt6190 + + reg: + maxItems: 1 + + enable-gpios: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + regulator-allowed-modes: + description: | + buck allowed operating mode + 0: PSM mode (light load Power Saving Mode) + 1: FCCM mode (Forced-CCM mode) + maxItems: 2 + items: + enum: [0, 1] + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@2c { + compatible = "richtek,rt6190"; + reg = <0x2c>; + wakeup-source; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + enable-gpios = <&gpio26 1 GPIO_ACTIVE_HIGH>; + regulator-name = "richtek,rt6190-buckboost"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <32000000>; + regulator-min-microamp = <306000>; + regulator-max-microamp = <12114000>; + regulator-allowed-modes = <0 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml new file mode 100644 index 0000000000..b73762e151 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt6245-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT6245 High Current Voltage Regulator + +maintainers: + - ChiYuan Huang + +description: | + The RT6245 is a high-performance, synchronous step-down converter + that can deliver up to 14A output current with an input supply + voltage range of 4.5V to 17V. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - richtek,rt6245 + + reg: + maxItems: 1 + + enable-gpios: + description: | + A connection of the chip 'enable' gpio line. If not provided, + it will be treat as a default-on power. + maxItems: 1 + + richtek,oc-level-select: + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [0, 1, 2, 3] + description: | + Over current level selection. Each respective value means the current + limit 8A, 14A, 12A, 10A. If this property is missing then keep in + in chip default. + + richtek,ot-level-select: + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [0, 1, 2] + description: | + Over temperature level selection. Each respective value means the degree + 150'c, 130'c, 170'c. If this property is missing then keep in chip + default. + + richtek,pgdly-time-select: + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [0, 1, 2, 3] + description: | + Power good signal delay time selection. Each respective value means the + delay time 0us, 10us, 20us, 40us. If this property is missing then keep + in chip default. + + + richtek,switch-freq-select: + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [0, 1, 2] + description: | + Buck switch frequency selection. Each respective value means 400KHz, + 800KHz, 1200KHz. If this property is missing then keep in chip default. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt6245@34 { + compatible = "richtek,rt6245"; + reg = <0x34>; + enable-gpios = <&gpio26 2 0>; + + regulator-name = "rt6245-regulator"; + regulator-min-microvolt = <437500>; + regulator-max-microvolt = <1387500>; + regulator-boot-on; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml new file mode 100644 index 0000000000..fec3d396ca --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rtmv20-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RTMV20 laser diode regulator + +maintainers: + - ChiYuan Huang + +description: | + Richtek RTMV20 is a load switch current regulator that can supply up to 6A. + It is used to drive laser diode. There're two signals for chip controls + (Enable/Fail), Enable pin to turn chip on, and Fail pin as fault indication. + There're still four pins for camera control, two inputs (strobe and vsync), + the others for outputs (fsin1 and fsin2). Strobe input to start the current + supply, vsync input from IR camera, and fsin1/fsin2 output for the optional. + +properties: + compatible: + const: richtek,rtmv20 + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + enable-gpios: + description: A connection of the 'enable' gpio line. + maxItems: 1 + + richtek,ld-pulse-delay-us: + description: | + load current pulse delay in microsecond after strobe pin pulse high. + minimum: 0 + maximum: 100000 + default: 0 + + richtek,ld-pulse-width-us: + description: | + Load current pulse width in microsecond after strobe pin pulse high. + minimum: 0 + maximum: 10000 + default: 1200 + + richtek,fsin1-delay-us: + description: | + Fsin1 pulse high delay in microsecond after vsync signal pulse high. + minimum: 0 + maximum: 100000 + default: 23000 + + richtek,fsin1-width-us: + description: | + Fsin1 pulse high width in microsecond after vsync signal pulse high. + minimum: 40 + maximum: 10000 + default: 160 + + richtek,fsin2-delay-us: + description: | + Fsin2 pulse high delay in microsecond after vsync signal pulse high. + minimum: 0 + maximum: 100000 + default: 23000 + + richtek,fsin2-width-us: + description: | + Fsin2 pulse high width in microsecond after vsync signal pulse high. + minimum: 40 + maximum: 10000 + default: 160 + + richtek,es-pulse-width-us: + description: Eye safety function pulse width limit in microsecond. + minimum: 0 + maximum: 10000 + default: 1200 + + richtek,es-ld-current-microamp: + description: Eye safety function load current limit in microamp. + minimum: 0 + maximum: 6000000 + default: 3000000 + + richtek,lbp-level-microvolt: + description: Low battery protection level in microvolt. + minimum: 2400000 + maximum: 3700000 + default: 2700000 + + richtek,lbp-enable: + description: Low battery protection function enable control. + type: boolean + + richtek,strobe-polarity-high: + description: Strobe pin active polarity control. + type: boolean + + richtek,vsync-polarity-high: + description: Vsync pin active polarity control. + type: boolean + + richtek,fsin-enable: + description: Fsin function enable control. + type: boolean + + richtek,fsin-output: + description: Fsin function output control. + type: boolean + + richtek,es-enable: + description: Eye safety function enable control. + type: boolean + + lsw: + description: load switch current regulator description. + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - wakeup-source + - interrupts + - enable-gpios + - lsw + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtmv20@34 { + compatible = "richtek,rtmv20"; + reg = <0x34>; + wakeup-source; + interrupts-extended = <&gpio26 2 IRQ_TYPE_LEVEL_LOW>; + enable-gpios = <&gpio26 3 0>; + + richtek,strobe-polarity-high; + richtek,vsync-polarity-high; + + lsw { + regulator-name = "rtmv20,lsw"; + regulator-min-microamp = <0>; + regulator-max-microamp = <6000000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq2134-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq2134-regulator.yaml new file mode 100644 index 0000000000..3f47e8e6c4 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rtq2134-regulator.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rtq2134-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RTQ2134 SubPMIC Regulator + +maintainers: + - ChiYuan Huang + +description: | + The RTQ2134 is a multi-phase, programmable power management IC that + integrates with four high efficient, synchronous step-down converter cores. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RTQ2134-QA/DSQ2134-QA-01.pdf + +properties: + compatible: + enum: + - richtek,rtq2134 + + reg: + maxItems: 1 + + regulators: + type: object + + patternProperties: + "^buck[1-3]$": + type: object + $ref: regulator.yaml# + description: | + regulator description for buck[1-3]. + + properties: + richtek,use-vsel-dvs: + type: boolean + description: | + If specified, buck will listen to 'vsel' pin for dvs config. + Else, use dvs0 voltage by default. + + richtek,uv-shutdown: + type: boolean + description: | + If specified, use shutdown as UV action. Else, hiccup by default. + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtq2134@18 { + compatible = "richtek,rtq2134"; + reg = <0x18>; + + regulators { + buck1 { + regulator-name = "rtq2134-buck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1850000>; + regulator-always-on; + richtek,use-vsel-dvs; + regulator-state-mem { + regulator-suspend-min-microvolt = <550000>; + regulator-suspend-max-microvolt = <550000>; + }; + }; + buck2 { + regulator-name = "rtq2134-buck2"; + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1120000>; + regulator-always-on; + richtek,use-vsel-dvs; + regulator-state-mem { + regulator-suspend-min-microvolt = <1120000>; + regulator-suspend-max-microvolt = <1120000>; + }; + }; + buck3 { + regulator-name = "rtq2134-buck3"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + regulator-always-on; + richtek,use-vsel-dvs; + regulator-state-mem { + regulator-suspend-min-microvolt = <600000>; + regulator-suspend-max-microvolt = <600000>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml new file mode 100644 index 0000000000..609c06615b --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rtq2208.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RTQ2208 SubPMIC Regulator + +maintainers: + - Alina Yu + +description: | + RTQ2208 is a highly integrated power converter that offers functional safety dual + multi-configurable synchronous buck converters and two LDOs. + + Bucks support "regulator-allowed-modes" and "regulator-mode". The former defines the permitted + switching operation in normal mode; the latter defines the operation in suspend to RAM mode. + + No matter the RTQ2208 is configured to normal or suspend to RAM mode, there are two switching + operation modes for all buck rails, automatic power saving mode (Auto mode) and forced continuous + conduction mode (FCCM). + + The definition of modes is in the datasheet which is available in below link + and their meaning is:: + 0 - Auto mode for power saving, which reducing the switching frequency at light load condition + to maintain high frequency. + 1 - FCCM to meet the strict voltage regulation accuracy, which keeping constant switching frequency. + + Datasheet will be available soon at + https://www.richtek.com/assets/Products + +properties: + compatible: + enum: + - richtek,rtq2208 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + richtek,mtp-sel-high: + type: boolean + description: + vout register selection based on this boolean value. + false - Using DVS0 register setting to adjust vout + true - Using DVS1 register setting to adjust vout + + regulators: + type: object + additionalProperties: false + + patternProperties: + "^buck-[a-h]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + description for buck-[a-h] regulator. + + properties: + regulator-allowed-modes: + description: + two buck modes in different switching accuracy. + 0 - Auto mode + 1 - FCCM + items: + enum: [0, 1] + + "^ldo[1-2]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + regulator description for ldo[1-2]. + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@10 { + compatible = "richtek,rtq2208"; + reg = <0x10>; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + richtek,mtp-sel-high; + + regulators { + buck-a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-c { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-d { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-e { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-f { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-g { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-h { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + ldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml new file mode 100644 index 0000000000..ef62c618de --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rtq6752-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RTQ6752 TFT LCD Voltage Regulator + +maintainers: + - ChiYuan Huang + +description: | + The RTQ6752 is an I2C interface pgorammable power management IC. It includes + two synchronous boost converter for PAVDD, and one synchronous NAVDD + buck-boost. The device is suitable for automotive TFT-LCD panel. + +properties: + compatible: + enum: + - richtek,rtq6752 + + reg: + maxItems: 1 + + enable-gpios: + description: | + A connection of the chip 'enable' gpio line. If not provided, treat it as + external pull up. + maxItems: 1 + + regulators: + type: object + + patternProperties: + "^(p|n)avdd$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: | + regulator description for pavdd and navdd. + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtq6752@6b { + compatible = "richtek,rtq6752"; + reg = <0x6b>; + enable-gpios = <&gpio26 2 0>; + + regulators { + pavdd { + regulator-name = "rtq6752-pavdd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <7300000>; + regulator-boot-on; + }; + navdd { + regulator-name = "rtq6752-navdd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <7300000>; + regulator-boot-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml new file mode 100644 index 0000000000..cc4ceb32e9 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71815 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen + +description: | + This module is part of the ROHM BD718215 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml. + + The regulator controller is represented as a sub-node of the PMIC node + on the device tree. + + The valid names for BD71815 regulator nodes are + buck1, buck2, buck3, buck4, buck5, + ldo1, ldo2, ldo3, ldo4, ldo5, + ldodvref, ldolpsr, wled + +properties: + wled: + type: object + description: + properties for wled regulator + $ref: regulator.yaml# + unevaluatedProperties: false + + properties: + regulator-name: + const: wled + +patternProperties: + "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$": + type: object + description: + Properties for single LDO/BUCK regulator. + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$" + description: + should be "ldo1", ..., "ldo5", "buck1", ..., "buck5" and "ldolpsr" + for ldolpsr regulator, "ldodvref" for ldodvref reglator. + + rohm,vsel-gpios: + description: + GPIO used to control ldo4 state (when ldo4 is controlled by GPIO). + + rohm,dvs-run-voltage: + description: + PMIC "RUN" state voltage in uV when PMIC HW states are used. See + comments below for bucks/LDOs which support this. 0 means + regulator should be disabled at RUN state. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3300000 + + rohm,dvs-snvs-voltage: + description: + Whether to keep regulator enabled at "SNVS" state or not. + 0 means regulator should be disabled at SNVS state, non zero voltage + keeps regulator enabled. BD71815 does not change voltage level + when PMIC transitions to SNVS.SNVS voltage depends on the previous + state (from which the PMIC transitioned to SNVS). + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3300000 + + rohm,dvs-suspend-voltage: + description: + PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. See + comments below for bucks/LDOs which support this. 0 means + regulator should be disabled at SUSPEND state. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3300000 + + rohm,dvs-lpsr-voltage: + description: + PMIC "LPSR" state voltage in uV when PMIC HW states are used. See + comments below for bucks/LDOs which support this. 0 means + regulator should be disabled at LPSR state. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3300000 + + # Bucks 1 and 2 support giving separate voltages for operational states + # (RUN /CLEAN according to data-sheet) and non operational states + # (LPSR/SUSPEND). The voltage is automatically changed when HW + # state changes. Omitting these properties from bucks 1 and 2 leave + # buck voltages to not be toggled by HW state. Enable status may still + # be toggled by state changes depending on HW default settings. + # + # Bucks 3-5 and ldos 1-5 support setting the RUN state voltage here. + # Given RUN voltage is used at all states if regulator is enabled at + # given state. + # Values given for other states are regarded as enable/disable at + # given state (see below). + # + # All regulators except WLED support specifying enable/disable status + # for each of the HW states (RUN/SNVS/SUSPEND/LPSR). HW defaults can + # be overridden by setting voltage to 0 (regulator disabled at given + # state) or non-zero (regulator enabled at given state). Please note + # that setting non zero voltages for bucks 1/2 will also enable voltage + # changes according to state change. + + required: + - regulator-name + + unevaluatedProperties: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml new file mode 100644 index 0000000000..d898800d6b --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd71828-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71828 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen + +description: | + This module is part of the ROHM BD71828 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml. + + The regulator controller is represented as a sub-node of the PMIC node + on the device tree. + + Regulator nodes should be named to BUCK_ and LDO_. + The valid names for BD71828 regulator nodes are + BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7 + LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7 + +patternProperties: + "^LDO[1-7]$": + type: object + description: + Properties for single LDO regulator. + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^ldo[1-7]$" + description: + should be "ldo1", ..., "ldo7" + + unevaluatedProperties: false + + "^BUCK[1-7]$": + type: object + description: + Properties for single BUCK regulator. + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^buck[1-7]$" + description: + should be "buck1", ..., "buck7" + + rohm,dvs-run-voltage: + description: + PMIC default "RUN" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3300000 + + rohm,dvs-idle-voltage: + description: + PMIC default "IDLE" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3300000 + + rohm,dvs-suspend-voltage: + description: + PMIC default "SUSPEND" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3300000 + + rohm,dvs-lpsr-voltage: + description: + PMIC default "LPSR" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3300000 + + # Supported default DVS states: + # buck | run | idle | suspend | lpsr + # -------------------------------------------------------------- + # 1, 2, 6, and 7 | supported | supported | supported (*) + # -------------------------------------------------------------- + # 3, 4, and 5 | supported (**) + # -------------------------------------------------------------- + # + # (*) LPSR and SUSPEND states use same voltage but both states have own + # enable / + # disable settings. Voltage 0 can be specified for a state to make + # regulator disabled on that state. + # + # (**) All states use same voltage but have own enable / disable + # settings. Voltage 0 can be specified for a state to make + # regulator disabled on that state. + + required: + - regulator-name + + unevaluatedProperties: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml new file mode 100644 index 0000000000..29b350a4f8 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd71837-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71837 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen + +description: | + List of regulators provided by this controller. BD71837 regulators node + should be sub node of the BD71837 MFD node. See BD71837 MFD bindings at + Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml + Regulator nodes should be named to BUCK_ and LDO_. The + definition for each of these nodes is defined using the standard + binding for regulators at + Documentation/devicetree/bindings/regulator/regulator.txt. + Note that if BD71837 starts at RUN state you probably want to use + regulator-boot-on at least for BUCK6 and BUCK7 so that those are not + disabled by driver at startup. LDO5 and LDO6 are supplied by those and + if they are disabled at startup the voltage monitoring for LDO5/LDO6 will + cause PMIC to reset. + +# The valid names for BD71837 regulator nodes are: +# BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7, BUCK8 +# LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7 + +patternProperties: + "^LDO[1-7]$": + type: object + $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + properties: + regulator-name: + pattern: "^ldo[1-7]$" + description: + should be "ldo1", ..., "ldo7" + + unevaluatedProperties: false + + "^BUCK[1-8]$": + type: object + $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + properties: + regulator-name: + pattern: "^buck[1-8]$" + description: + should be "buck1", ..., "buck8" + + rohm,dvs-run-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1300000 + description: + PMIC default "RUN" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + rohm,dvs-idle-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1300000 + description: + PMIC default "IDLE" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + rohm,dvs-suspend-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1300000 + description: + PMIC default "SUSPEND" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + # Supported default DVS states: + # + # BD71837: + # buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage + # ---------------------------------------------------------------- + # 1 | supported | supported | supported + # ---------------------------------------------------------------- + # 2 | supported | supported | not supported + # ---------------------------------------------------------------- + # 3 | supported | not supported | not supported + # ---------------------------------------------------------------- + # 4 | supported | not supported | not supported + # ---------------------------------------------------------------- + # rest | not supported | not supported | not supported + + # BD71837 power outputs can either be controlled by the PMIC internal + # hardware state machine or by software. If you need regulators to be + # turned ON/OFF for example based on PMIC_STBY_REQ line (which toggles + # PMIC HW state machine) - then you should set this property. + # Tradeoff is that then SW can't control the ON/OFF state for this + # regulator (other than invoking a PMIC state change). + rohm,no-regulator-enable-control: + description: | + Enable/Disable control of this regulator must be left to the + PMIC hardware state machine. + type: boolean + + # Setups where regulator (especially the buck8) output voltage is scaled + # by adding external connection where some other regulator output is + # connected to feedback-pin (over suitable resistors) is getting popular + # amongst users of BD71837. (This allows for example scaling down the + # buck8 voltages to suit lover GPU voltages for projects where buck8 is + # (ab)used to supply power for GPU. + # + # So we allow describing this external connection from DT and scale the + # voltages accordingly. This is what the connection should look like: + # + # |---------------| + # | buck 8 |-------+----->Vout + # | | | + # |---------------| | + # | | + # | | + # +-------+--R2----+ + # | + # R1 + # | + # V FB-pull-up + # + # Here the buck output is sifted according to formula: + # + # Vout_o = Vo - (Vpu - Vo)*R2/R1 + # Linear_step = step_orig*(R1+R2)/R1 + # + # where: + # Vout_o is adjusted voltage output at vsel reg value 0 + # Vo is original voltage output at vsel reg value 0 + # Vpu is the pull-up voltage V FB-pull-up in the picture + # R1 and R2 are resistor values. + + rohm,fb-pull-up-microvolt: + description: + Feedback-pin has pull-up connection to adjust voltage range. This is + the used pull-up voltage before R1. + + rohm,feedback-pull-up-r1-ohms: + description: + Feedback-pin has pull-up connection to adjust voltage range. This is + the used R1 resistor. + + rohm,feedback-pull-up-r2-ohms: + description: + Feedback-pin has pull-up connection to adjust voltage range. This is + the used R2 resistor. + + required: + - regulator-name + + unevaluatedProperties: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml new file mode 100644 index 0000000000..7ba4ccf723 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd71847-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71847 and BD71850 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen + +description: | + List of regulators provided by this controller. BD71847 regulators node + should be sub node of the BD71847 MFD node. See BD71847 MFD bindings at + Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml + Regulator nodes should be named to BUCK_ and LDO_. The + definition for each of these nodes is defined using the standard + binding for regulators at + Documentation/devicetree/bindings/regulator/regulator.txt. + Note that if BD71847 starts at RUN state you probably want to use + regulator-boot-on at least for BUCK5. LDO6 is supplied by it and it must + not be disabled by driver at startup. If BUCK5 is disabled at startup the + voltage monitoring for LDO5/LDO6 can cause PMIC to reset. + +# The valid names for BD71847 regulator nodes are: +# BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6 +# LDO1, LDO2, LDO3, LDO4, LDO5, LDO6 + +patternProperties: + "^LDO[1-6]$": + type: object + $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + properties: + regulator-name: + pattern: "^ldo[1-6]$" + description: + should be "ldo1", ..., "ldo6" + + unevaluatedProperties: false + + "^BUCK[1-6]$": + type: object + $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + properties: + regulator-name: + pattern: "^buck[1-6]$" + description: + should be "buck1", ..., "buck6" + + rohm,dvs-run-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1300000 + description: + PMIC default "RUN" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + rohm,dvs-idle-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1300000 + description: + PMIC default "IDLE" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + rohm,dvs-suspend-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1300000 + description: + PMIC default "SUSPEND" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + # Supported default DVS states: + # + # BD71847: + # buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage + # ---------------------------------------------------------------- + # 1 | supported | supported | supported + # ---------------------------------------------------------------- + # 2 | supported | supported | not supported + # ---------------------------------------------------------------- + # rest | not supported | not supported | not supported + + # BD718(47/50) power outputs can either be controlled by the PMIC internal + # hardware state machine or by software. If you need regulators to be + # turned ON/OFF for example based on PMIC_STBY_REQ line (which toggles + # PMIC HW state machine) - then you should set this property. + # Tradeoff is that then SW can't control the ON/OFF state for this + # regulator (other than invoking a PMIC state change). + rohm,no-regulator-enable-control: + description: | + Enable/Disable control of this regulator must be left to the + PMIC hardware state machine. + type: boolean + + # Setups where regulator (especially the buck8) output voltage is scaled + # by adding external connection where some other regulator output is + # connected to feedback-pin (over suitable resistors) is getting popular + # amongst users of BD71837. (This allows for example scaling down the + # buck8 voltages to suit lover GPU voltages for projects where buck8 is + # (ab)used to supply power for GPU. + # + # So we allow describing this external connection from DT and scale the + # voltages accordingly. This is what the connection should look like: + # + # |---------------| + # | buck 8 |-------+----->Vout + # | | | + # |---------------| | + # | | + # | | + # +-------+--R2----+ + # | + # R1 + # | + # V FB-pull-up + # + # Here the buck output is sifted according to formula: + # + # Vout_o = Vo - (Vpu - Vo)*R2/R1 + # Linear_step = step_orig*(R1+R2)/R1 + # + # where: + # Vout_o is adjusted voltage output at vsel reg value 0 + # Vo is original voltage output at vsel reg value 0 + # Vpu is the pull-up voltage V FB-pull-up in the picture + # R1 and R2 are resistor values. + + rohm,fb-pull-up-microvolt: + description: + Feedback-pin has pull-up connection to adjust voltage range. This is + the used pull-up voltage before R1. + + rohm,feedback-pull-up-r1-ohms: + description: + Feedback-pin has pull-up connection to adjust voltage range. This is + the used R1 resistor. + + rohm,feedback-pull-up-r2-ohms: + description: + Feedback-pin has pull-up connection to adjust voltage range. This is + the used R2 resistor. + + required: + - regulator-name + + unevaluatedProperties: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml new file mode 100644 index 0000000000..f573128da0 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd9576-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD9576 and BD9573 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen + +description: | + This module is part of the ROHM BD9576 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml. + + The regulator controller is represented as a sub-node of the PMIC node + on the device tree. + + The valid names for BD9576 regulator nodes are + regulator-vd50, regulator-vd18, regulator-vdddr, regulator-vd10, + regulator-voutl1, regulator-vouts1 + +patternProperties: + "^regulator-.+$": + type: object + description: + Properties for single regulator. + $ref: regulator.yaml# + + properties: + rohm,ocw-fet-ron-micro-ohms: + description: | + External FET's ON-resistance. Required if VoutS1 OCP/OCW is + to be set. + + required: + - regulator-name + + unevaluatedProperties: false +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml new file mode 100644 index 0000000000..0f9eb317ba --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/samsung,s2mpa01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPA01 Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S2MPA01 provides buck and LDO regulators. + + See also Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml for + additional information and example. + +patternProperties: + # 26 LDOs + "^LDO([1-9]|1[0-9]|2[0-6])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + + # 10 bucks + "^BUCK([1-9]|10)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + properties: + regulator-ramp-delay: + enum: [0, 6250, 12500, 25000, 50000] + default: 12500 + description: | + May be 0 for disabling the ramp delay on BUCK{1,2,3,4}. + + In the absence of the regulator-ramp-delay property, the default ramp + delay will be used. + + Note: Some bucks share the ramp rate setting i.e. same ramp value + will be set for a particular group of bucks so provide the same + regulator-ramp-delay value for them. + Groups sharing ramp rate: + * buck{1,6}, + * buck{2,4}, + * buck{8,9,10}. + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml new file mode 100644 index 0000000000..f1c50dcd0b --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/samsung,s2mps11.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPS11 Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S2MPS11 provides buck and LDO regulators. + + See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for + additional information and example. + +patternProperties: + # 38 LDOs + "^LDO([1-9]|[1-2][0-9]|3[0-8])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + + # 10 bucks + "^BUCK([1-9]|10)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml new file mode 100644 index 0000000000..53b105a4ea --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/samsung,s2mps13.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPS13 Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S2MPS13 provides buck and LDO regulators. + + See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for + additional information and example. + +patternProperties: + # 40 LDOs + "^LDO([1-9]|[1-3][0-9]|40)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + + # 10 bucks + "^BUCK([1-9]|10)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml new file mode 100644 index 0000000000..a7feb497eb --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/samsung,s2mps14.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPS14 Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S2MPS14 provides buck and LDO regulators. + + See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for + additional information and example. + +patternProperties: + # 25 LDOs, without LDO10-12 + "^LDO([1-9]|1[3-9]|2[0-5])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + + "^LDO(1[0-2])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + properties: + samsung,ext-control-gpios: + maxItems: 1 + description: + LDO10, LDO11 and LDO12 can be configured to external control over + GPIO. + + required: + - regulator-name + + # 5 bucks + "^BUCK[1-5]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml new file mode 100644 index 0000000000..9576c2df45 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/samsung,s2mps15.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPS15 Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S2MPS15 provides buck and LDO regulators. + + See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for + additional information and example. + +patternProperties: + # 27 LDOs + "^LDO([1-9]|[1][0-9]|2[0-7])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + + # 10 bucks + "^BUCK([1-9]|10)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml new file mode 100644 index 0000000000..39b652c3c3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/samsung,s2mpu02.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPU02 Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S2MPU02 provides buck and LDO regulators. + + See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for + additional information and example. + +patternProperties: + # 28 LDOs + "^LDO([1-9]|1[0-9]|2[0-8])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + + # 7 bucks + "^BUCK[1-7]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml new file mode 100644 index 0000000000..172631ca3c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/samsung,s5m8767.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5M8767 Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S5M8767 provides buck and LDO regulators. + + See also Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml for + additional information and example. + +patternProperties: + # 28 LDOs + "^LDO([1-9]|1[0-9]|2[0-8])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + properties: + op_mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 1 + description: | + Describes the different operating modes of the LDO's with power mode + change in SOC. The different possible values are: + 0 - always off mode + 1 - on in normal mode + 2 - low power mode + 3 - suspend mode + + required: + - regulator-name + + # 8 bucks + "^BUCK[1-8]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + properties: + op_mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 1 + description: | + Describes the different operating modes of the regulator with power + mode change in SOC. The different possible values are: + 0 - always off mode + 1 - on in normal mode + 2 - low power mode + 3 - suspend mode + + required: + - regulator-name + +properties: + # 9 buck + BUCK9: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + properties: + op_mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 1 + description: | + Describes the different operating modes of the regulator with power + mode change in SOC. The different possible values are: + 0 - always off mode + 1 - on in normal mode + 2 - low power mode + 3 - suspend mode + + s5m8767,pmic-ext-control-gpios: + maxItems: 1 + description: | + GPIO specifier for one GPIO controlling this regulator on/off. + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml new file mode 100644 index 0000000000..c3a902e11b --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/silergy,sy8106a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silergy SY8106A Voltage Regulator + +maintainers: + - Ondrej Jirman + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + const: silergy,sy8106a + + reg: + maxItems: 1 + + silergy,fixed-microvolt: + description: > + The voltage when I2C regulating is disabled (set by external resistor + like a fixed voltage) + +required: + - compatible + - reg + - silergy,fixed-microvolt + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@65 { + compatible = "silergy,sy8106a"; + reg = <0x65>; + regulator-name = "sy8106a-vdd"; + silergy,fixed-microvolt = <1200000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml new file mode 100644 index 0000000000..82af4d6561 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/silergy,sy8824x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: silergy sy8824c,sy8824e,sy20276 and sy20278 PMIC + +maintainers: + - Jisheng Zhang + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - silergy,sy8824c + - silergy,sy8824e + - silergy,sy20276 + - silergy,sy20278 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@60 { + compatible = "silergy,sy8824c"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + reg = <0x60>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml new file mode 100644 index 0000000000..b222adabc7 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/silergy,sy8827n.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: silergy sy8827n PMIC + +maintainers: + - Jisheng Zhang + +properties: + compatible: + enum: + - silergy,sy8827n + + reg: + maxItems: 1 + + enable-gpios: + description: GPIO to enable/disable the regulator. + maxItems: 1 + + silergy,vsel-state-high: + type: boolean + description: + Indicates if the VSEL pin is set to high. + If this property is missing, assume the VSEL pin is set to low. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@60 { + compatible = "silergy,sy8827n"; + reg = <0x60>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml b/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml new file mode 100644 index 0000000000..9d84117530 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/siliconmitus,sm5703-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Mitus SM5703 multi function device regulators + +maintainers: + - Markuss Broks + +description: | + SM5703 regulators node should be a sub node of the SM5703 MFD node. See SM5703 MFD + bindings at Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml + Regulator nodes should be named as USBLDO_, BUCK, VBUS, LDO_. + The definition for each of these nodes is defined using the standard + binding for regulators at Documentation/devicetree/bindings/regulator/regulator.txt. + +properties: + buck: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for the BUCK regulator. + + vbus: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for the VBUS regulator. + +patternProperties: + "^ldo[1-3]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + "^usbldo[1-2]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for a single USBLDO regulator. + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt new file mode 100644 index 0000000000..f9acbc1f3c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt @@ -0,0 +1,18 @@ +SKY81452 voltage regulator + +Required properties: +- regulator node named lout. +- any required generic properties defined in regulator.txt + +Optional properties: +- any available generic properties defined in regulator.txt + +Example: + + regulator { + lout { + regulator-name = "sky81452-lout"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <8000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml new file mode 100644 index 0000000000..ddaa112252 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/socionext,uniphier-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier regulator controller + +description: | + This regulator controls VBUS and belongs to USB3 glue layer. Before using + the regulator, it is necessary to control the clocks and resets to enable + this layer. These clocks and resets should be described in each property. + +maintainers: + - Kunihiko Hayashi + +# USB3 Controller + +properties: + compatible: + enum: + - socionext,uniphier-pro4-usb3-regulator + - socionext,uniphier-pro5-usb3-regulator + - socionext,uniphier-pxs2-usb3-regulator + - socionext,uniphier-ld20-usb3-regulator + - socionext,uniphier-pxs3-usb3-regulator + - socionext,uniphier-nx1-usb3-regulator + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: true + + resets: + minItems: 1 + maxItems: 2 + + reset-names: true + +allOf: + - $ref: regulator.yaml# + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pro4-usb3-regulator + - socionext,uniphier-pro5-usb3-regulator + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: gio + - const: link + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: link + else: + properties: + clocks: + maxItems: 1 + clock-names: + const: link + resets: + maxItems: 1 + reset-names: + const: link + +unevaluatedProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + +examples: + - | + usb_vbus0: regulators@100 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; diff --git a/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt new file mode 100644 index 0000000000..63dc07877c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt @@ -0,0 +1,43 @@ +Spreadtrum SC2731 Voltage regulators + +The SC2731 integrates low-voltage and low quiescent current DCDC/LDO. +14 LDO and 3 DCDCs are designed for external use. All DCDCs/LDOs have +their own bypass (power-down) control signals. External tantalum or MLCC +ceramic capacitors are recommended to use with these LDOs. + +Required properties: + - compatible: should be "sprd,sc27xx-regulator". + +List of regulators provided by this controller. It is named according to +its regulator type, BUCK_ and LDO_. The definition for each +of these nodes is defined using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are: +BUCK: + BUCK_CPU0, BUCK_CPU1, BUCK_RF +LDO: + LDO_CAMA0, LDO_CAMA1, LDO_CAMMOT, LDO_VLDO, LDO_EMMCCORE, LDO_SDCORE, + LDO_SDIO, LDO_WIFIPA, LDO_USB33, LDO_CAMD0, LDO_CAMD1, LDO_CON, + LDO_CAMIO, LDO_SRAM + +Example: + regulators { + compatible = "sprd,sc27xx-regulator"; + + vddarm0: BUCK_CPU0 { + regulator-name = "vddarm0"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1996875>; + regulator-ramp-delay = <25000>; + regulator-always-on; + }; + + vddcama0: LDO_CAMA0 { + regulator-name = "vddcama0"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + }; + ... + }; diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml new file mode 100644 index 0000000000..c863100f6e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/st,stm32-booster.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 booster for ADC analog input switches + +maintainers: + - Fabrice Gasnier + +description: | + Some STM32 devices embed a 3.3V booster supplied by Vdda, that can be used + to supply ADC analog input switches. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - st,stm32h7-booster + - st,stm32mp1-booster + + st,syscfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to system configuration controller. + + vdda-supply: + description: phandle to the vdda input analog voltage. + +required: + - compatible + - st,syscfg + - vdda-supply + +unevaluatedProperties: false + +examples: + - | + regulator-booster { + compatible = "st,stm32mp1-booster"; + st,syscfg = <&syscfg>; + vdda-supply = <&vdda>; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml new file mode 100644 index 0000000000..05f4ad2c7d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/st,stm32-vrefbuf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Voltage reference buffer + +description: | + Some STM32 devices embed a voltage reference buffer which can be used as + voltage reference for ADCs, DACs and also as voltage reference for external + components through the dedicated VREF+ pin. + +maintainers: + - Fabrice Gasnier + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + const: st,stm32-vrefbuf + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + vdda-supply: + description: phandle to the vdda input analog voltage. + +required: + - compatible + - reg + - clocks + - vdda-supply + +unevaluatedProperties: false + +examples: + - | + #include + vrefbuf@50025000 { + compatible = "st,stm32-vrefbuf"; + reg = <0x50025000 0x8>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2500000>; + clocks = <&rcc VREF>; + vdda-supply = <&vdda>; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml new file mode 100644 index 0000000000..c9586d277f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/st,stm32mp1-pwr-reg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32MP1 PWR voltage regulators + +maintainers: + - Pascal Paillet + +properties: + compatible: + const: st,stm32mp1,pwr-reg + + reg: + maxItems: 1 + + vdd-supply: + description: Input supply phandle(s) for vdd input + + vdd_3v3_usbfs-supply: + description: Input supply phandle(s) for vdd_3v3_usbfs input + +patternProperties: + "^(reg11|reg18|usb33)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pwr@50001000 { + compatible = "st,stm32mp1,pwr-reg"; + reg = <0x50001000 0x10>; + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; + + reg11 { + regulator-name = "reg11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + reg18 { + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + usb33 { + regulator-name = "usb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml new file mode 100644 index 0000000000..90c39275c1 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/ti,tps62360.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TPS6236x Voltage Regulators + +maintainers: + - Laxman Dewangan + +description: | + The TPS6236x are a family of step down dc-dc converter with + an input voltage range of 2.5V to 5.5V. The devices provide + up to 3A peak load current, and an output voltage range of + 0.77V to 1.4V (TPS62360/62) and 0.5V to 1.77V (TPS62361B/63). + + Datasheet is available at: + https://www.ti.com/lit/gpn/tps62360 + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - ti,tps62360 + - ti,tps62361 + - ti,tps62362 + - ti,tps62363 + + reg: + maxItems: 1 + + ti,vsel0-gpio: + description: | + GPIO for controlling VSEL0 line. If this property + is missing, then assume that there is no GPIO for + VSEL0 control. + maxItems: 1 + + ti,vsel1-gpio: + description: | + GPIO for controlling VSEL1 line. If this property + is missing, then assume that there is no GPIO for + VSEL1 control. + maxItems: 1 + + ti,enable-vout-discharge: + description: Enable output discharge. + type: boolean + + ti,enable-pull-down: + description: Enable pull down. + type: boolean + + ti,vsel0-state-high: + description: | + Initial state of VSEL0 input is high. If this property + is missing, then assume the state as low. + type: boolean + + ti,vsel1-state-high: + description: | + Initial state of VSEL1 input is high. If this property + is missing, then assume the state as low. + type: boolean + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@60 { + compatible = "ti,tps62361"; + reg = <0x60>; + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + ti,vsel0-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; + ti,vsel1-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; + ti,vsel0-state-high; + ti,vsel1-state-high; + ti,enable-pull-down; + ti,enable-vout-discharge; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml new file mode 100644 index 0000000000..0f29c75f42 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/ti,tps62864.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS62864/TPS6286/TPS62868/TPS62869 voltage regulator + +maintainers: + - Vincent Whitchurch + +properties: + compatible: + enum: + - ti,tps62864 + - ti,tps62866 + - ti,tps62868 + - ti,tps62869 + + reg: + maxItems: 1 + + regulators: + type: object + + properties: + "SW": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@48 { + compatible = "ti,tps62864"; + reg = <0x48>; + + regulators { + SW { + regulator-name = "+0.85V"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <890000>; + regulator-initial-mode = ; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml new file mode 100644 index 0000000000..386989544d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/ti,tps62870.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS62870/TPS62871/TPS62872/TPS62873 voltage regulator + +maintainers: + - Mårten Lindahl + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - ti,tps62870 + - ti,tps62871 + - ti,tps62872 + - ti,tps62873 + + reg: + maxItems: 1 + + regulator-initial-mode: + enum: [ 1, 2 ] + description: 1 - Forced PWM mode, 2 - Low power mode + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@41 { + compatible = "ti,tps62873"; + reg = <0x41>; + regulator-name = "+0.75V"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1675000>; + regulator-initial-mode = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml new file mode 100644 index 0000000000..78e64521d4 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/ti,tps65219.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI tps65219 Power Management Integrated Circuit regulators + +maintainers: + - Jerome Neanne + +description: | + Regulator nodes should be named to buck and ldo. + +properties: + compatible: + enum: + - ti,tps65219 + + reg: + maxItems: 1 + + system-power-controller: + type: boolean + description: Optional property that indicates that this device is + controlling system power. + + interrupts: + description: Short-circuit, over-current, under-voltage for regulators, PB interrupts. + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: Specifies the PIN numbers and Flags, as defined in + include/dt-bindings/interrupt-controller/irq.h + const: 1 + + ti,power-button: + type: boolean + description: | + Optional property that sets the EN/PB/VSENSE pin to be a + power-button. + TPS65219 has a multipurpose pin called EN/PB/VSENSE that can be either + 1. EN in which case it functions as an enable pin. + 2. VSENSE which compares the voltages and triggers an automatic + on/off request. + 3. PB in which case it can be configured to trigger an interrupt + to the SoC. + ti,power-button reflects the last one of those options + where the board has a button wired to the pin and triggers + an interrupt on pressing it. + + regulators: + type: object + description: | + list of regulators provided by this controller + + patternProperties: + "^ldo[1-4]$": + type: object + $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + unevaluatedProperties: false + + "^buck[1-3]$": + type: object + $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + unevaluatedProperties: false + + additionalProperties: false + +patternProperties: + "^buck[1-3]-supply$": + description: Input supply phandle of one regulator. + + "^ldo[1-4]-supply$": + description: Input supply phandle of one regulator. + +required: + - compatible + - reg + - interrupts + - regulators + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tps65219: pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vcc_3v3_sys>; + buck2-supply = <&vcc_3v3_sys>; + buck3-supply = <&vcc_3v3_sys>; + ldo1-supply = <&vcc_3v3_sys>; + ldo2-supply = <&buck2_reg>; + ldo3-supply = <&vcc_3v3_sys>; + ldo4-supply = <&vcc_3v3_sys>; + + pinctrl-0 = <&pmic_irq_pins_default>; + + interrupt-parent = <&gic500>; + interrupts = ; + ti,power-button; + + regulators { + buck1_reg: buck1 { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "VDD_LPDDR4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "VDDSHV_SD_IO_PMIC"; + regulator-min-microvolt = <33000000>; + regulator-max-microvolt = <33000000>; + }; + + ldo2_reg: ldo2 { + regulator-name = "VDDAR_CORE"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <18000000>; + regulator-max-microvolt = <18000000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "VDD_PHY_2V5"; + regulator-min-microvolt = <25000000>; + regulator-max-microvolt = <25000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt new file mode 100644 index 0000000000..6a23ad9ac5 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt @@ -0,0 +1,132 @@ +Adaptive Body Bias(ABB) SoC internal LDO regulator for Texas Instruments SoCs + +Required Properties: +- compatible: Should be one of: + - "ti,abb-v1" for older SoCs like OMAP3 + - "ti,abb-v2" for newer SoCs like OMAP4, OMAP5 + - "ti,abb-v3" for a generic definition where setup and control registers are + provided (example: DRA7) +- reg: Address and length of the register set for the device. It contains + the information of registers in the same order as described by reg-names +- reg-names: Should contain the reg names + - "base-address" - contains base address of ABB module (ti,abb-v1,ti,abb-v2) + - "control-address" - contains control register address of ABB module (ti,abb-v3) + - "setup-address" - contains setup register address of ABB module (ti,abb-v3) + - "int-address" - contains address of interrupt register for ABB module + (also see Optional properties) +- #address-cells: should be 0 +- #size-cells: should be 0 +- clocks: should point to the clock node used by ABB module +- ti,settling-time: Settling time in uSecs from SoC documentation for ABB module + to settle down(target time for SR2_WTCNT_VALUE). +- ti,clock-cycles: SoC specific data about count of system ti,clock-cycles used for + computing settling time from SoC Documentation for ABB module(clock + cycles for SR2_WTCNT_VALUE). +- ti,tranxdone-status-mask: Mask to the int-register to write-to-clear mask + indicating LDO tranxdone (operation complete). +- ti,abb_info: An array of 6-tuples u32 items providing information about ABB + configuration needed per operational voltage of the device. + Each item consists of the following in the same order: + volt: voltage in uV - Only used to index ABB information. + ABB mode: one of the following: + 0-bypass + 1-Forward Body Bias(FBB) + 3-Reverse Body Bias(RBB) + efuse: (see Optional properties) + RBB enable efuse Mask: (See Optional properties) + FBB enable efuse Mask: (See Optional properties) + Vset value efuse Mask: (See Optional properties) + + NOTE: If more than 1 entry is present, then regulator is setup to change + voltage, allowing for various modes to be selected indexed off + the regulator. Further, ABB LDOs are considered always-on by + default. + +Optional Properties: +- reg-names: In addition to the required properties, the following are optional + - "efuse-address" - Contains efuse base address used to pick up ABB info. + - "ldo-address" - Contains address of ABB LDO override register. + "efuse-address" is required for this. +- ti,ldovbb-vset-mask - Required if ldo-address is set, mask for LDO override + register to provide override vset value. +- ti,ldovbb-override-mask - Required if ldo-address is set, mask for LDO + override register to enable override vset value. +- ti,abb_opp_sel: Addendum to the description in required properties + efuse: Mandatory if 'efuse-address' register is defined. Provides offset + from efuse-address to pick up ABB characteristics. Set to 0 if + 'efuse-address' is not defined. + RBB enable efuse Mask: Optional if 'efuse-address' register is defined. + 'ABB mode' is force set to RBB mode if value at "efuse-address" + + efuse maps to RBB mask. Set to 0 to ignore this. + FBB enable efuse Mask: Optional if 'efuse-address' register is defined. + 'ABB mode' is force set to FBB mode if value at "efuse-address" + + efuse maps to FBB mask (valid only if RBB mask does not match) + Set to 0 to ignore this. + Vset value efuse Mask: Mandatory if ldo-address is set. Picks up from + efuse the value to set in 'ti,ldovbb-vset-mask' at ldo-address. + +Example #1: Simplest configuration (no efuse data, hard coded ABB table): +abb_x: regulator-abb-x { + compatible = "ti,abb-v1"; + regulator-name = "abb_x"; + #address-cells = <0>; + #size-cells = <0>; + reg = <0x483072f0 0x8>, <0x48306818 0x4>; + reg-names = "base-address", "int-address"; + ti,tranxdone-status-mask = <0x4000000>; + clocks = <&sysclk>; + ti,settling-time = <30>; + ti,clock-cycles = <8>; + ti,abb_info = < + /* uV ABB efuse rbb_m fbb_m vset_m */ + 1012500 0 0 0 0 0 /* Bypass */ + 1200000 3 0 0 0 0 /* RBB mandatory */ + 1320000 1 0 0 0 0 /* FBB mandatory */ + >; +}; + +Example #2: Efuse bits contain ABB mode setting (no LDO override capability) +abb_y: regulator-abb-y { + compatible = "ti,abb-v2"; + regulator-name = "abb_y"; + #address-cells = <0>; + #size-cells = <0>; + reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>, <0x4A002268 0x8>; + reg-names = "base-address", "int-address", "efuse-address"; + ti,tranxdone-status-mask = <0x4000000>; + clocks = <&sysclk>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + ti,abb_info = < + /* uV ABB efuse rbb_m fbb_m vset_m */ + 975000 0 0 0 0 0 /* Bypass */ + 1012500 0 0 0x40000 0 0 /* RBB optional */ + 1200000 0 0x4 0 0x40000 0 /* FBB optional */ + 1320000 1 0 0 0 0 /* FBB mandatory */ + >; +}; + +Example #3: Efuse bits contain ABB mode setting and LDO override capability +abb_z: regulator-abb-z { + compatible = "ti,abb-v2"; + regulator-name = "abb_z"; + #address-cells = <0>; + #size-cells = <0>; + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>, + <0x4a002194 0x8>, <0x4ae0C314 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x8000000>; + /* LDOVBBMM_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMM_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + clocks = <&sysclk>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + ti,abb_info = < + /* uV ABB efuse rbb_m fbb_m vset_m */ + 975000 0 0 0 0 0 /* Bypass */ + 1200000 0 0x4 0 0x40000 0x1f00 /* FBB optional, vset */ + >; +}; diff --git a/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt new file mode 100644 index 0000000000..2f7e44a964 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt @@ -0,0 +1,27 @@ +TPS51632 Voltage regulators + +Required properties: +- compatible: Must be "ti,tps51632" +- reg: I2C slave address + +Optional properties: +- ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface. +- ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this + will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage + step is 10mV as per datasheet. + +Any property defined as part of the core regulator binding, defined in +regulator.txt, can also be used. + +Example: + + tps51632 { + compatible = "ti,tps51632"; + reg = <0x43>; + regulator-name = "tps51632-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + ti,enable-pwm-dvfs; + ti,dvfs-step-20mV; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65023.txt b/Documentation/devicetree/bindings/regulator/tps65023.txt new file mode 100644 index 0000000000..a4714e4da3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65023.txt @@ -0,0 +1,60 @@ +TPS65023 family of regulators + +Required properties: +- compatible: Must be one of the following. + "ti,tps65020", + "ti,tps65021", + "ti,tps65023", +- reg: I2C slave address +- regulators: list of regulators provided by this controller, must be named + after their hardware counterparts: VDCDC[1-3] and LDO[1-2] +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. The definition for each of + these nodes is defined using the standard binding for regulators found at + Documentation/devicetree/bindings/regulator/regulator.txt. + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps65023@48 { + compatible = "ti,tps65023"; + reg = <0x48>; + + regulators { + VDCDC1 { + regulator-name = "vdd_mpu"; + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + VDCDC2 { + regulator-name = "vdd_core"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + VDCDC3 { + regulator-name = "vdd_io"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO1 { + regulator-name = "vdd_usb18"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO2 { + regulator-name = "vdd_usb33"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt new file mode 100644 index 0000000000..ae326f2635 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65090.txt @@ -0,0 +1,126 @@ +TPS65090 regulators + +Required properties: +- compatible: "ti,tps65090" +- reg: I2C slave address +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + dcdc[1-3], fet[1-7] and ldo[1-2] respectively. +- vsys[1-3]-supply: The input supply for DCDC[1-3] respectively. +- infet[1-7]-supply: The input supply for FET[1-7] respectively. +- vsys-l[1-2]-supply: The input supply for LDO[1-2] respectively. + +Optional properties: +- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3. + If DCDCs are externally controlled then this property should be there. +- dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3. + If DCDCs are externally controlled and if it is from GPIO then GPIO + number should be provided. If it is externally controlled and no GPIO + entry then driver will just configure this rails as external control + and will not provide any enable/disable APIs. +- ti,overcurrent-wait: This is applicable to FET registers, which have a + poorly defined "overcurrent wait" field. If this property is present it + should be between 0 - 3. If this property isn't present we won't touch the + "overcurrent wait" field and we'll leave it to the BIOS/EC to deal with. + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps65090@48 { + compatible = "ti,tps65090"; + reg = <0x48>; + interrupts = <0 88 0x4>; + + vsys1-supply = <&some_reg>; + vsys2-supply = <&some_reg>; + vsys3-supply = <&some_reg>; + infet1-supply = <&some_reg>; + infet2-supply = <&some_reg>; + infet3-supply = <&some_reg>; + infet4-supply = <&some_reg>; + infet5-supply = <&some_reg>; + infet6-supply = <&some_reg>; + infet7-supply = <&some_reg>; + vsys-l1-supply = <&some_reg>; + vsys-l2-supply = <&some_reg>; + + regulators { + dcdc1 { + regulator-name = "dcdc1"; + regulator-boot-on; + regulator-always-on; + ti,enable-ext-control; + dcdc-ext-control-gpios = <&gpio 10 0>; + }; + + dcdc2 { + regulator-name = "dcdc2"; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3 { + regulator-name = "dcdc3"; + regulator-boot-on; + regulator-always-on; + }; + + fet1 { + regulator-name = "fet1"; + regulator-boot-on; + regulator-always-on; + }; + + fet2 { + regulator-name = "fet2"; + regulator-boot-on; + regulator-always-on; + }; + + fet3 { + regulator-name = "fet3"; + regulator-boot-on; + regulator-always-on; + }; + + fet4 { + regulator-name = "fet4"; + regulator-boot-on; + regulator-always-on; + }; + + fet5 { + regulator-name = "fet5"; + regulator-boot-on; + regulator-always-on; + }; + + fet6 { + regulator-name = "fet6"; + regulator-boot-on; + regulator-always-on; + }; + + fet7 { + regulator-name = "fet7"; + regulator-boot-on; + regulator-always-on; + }; + + ldo1 { + regulator-name = "ldo1"; + regulator-boot-on; + regulator-always-on; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt new file mode 100644 index 0000000000..3a3505520c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt @@ -0,0 +1,46 @@ +TPS65132 regulators + +Required properties: +- compatible: "ti,tps65132" +- reg: I2C slave address + +Optional Subnode: +Device supports two regulators OUTP and OUTN. A sub node within the + device node describe the properties of these regulators. The sub-node + names must be as follows: + -For regulator outp, the sub node name should be "outp". + -For regulator outn, the sub node name should be "outn". + +-enable-gpios:(active high, output) Regulators are controlled by the input pins. + If it is connected to GPIO through host system then provide the + gpio number as per gpio.txt. +-active-discharge-gpios: (active high, output) Some configurations use delay mechanisms + on the enable pin, to keep the regulator enabled for some time after + the enable signal goes low. This GPIO is used to actively discharge + the delay mechanism. Requires specification of ti,active-discharge-time-us +-ti,active-discharge-time-us: how long the active discharge gpio should be + asserted for during active discharge, in microseconds. + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps65132@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + + outp { + regulator-name = "outp"; + regulator-boot-on; + regulator-always-on; + enable-gpios = <&gpio 23 0>; + }; + + outn { + regulator-name = "outn"; + regulator-boot-on; + regulator-always-on; + regulator-active-discharge = <0>; + enable-gpios = <&gpio 40 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt new file mode 100644 index 0000000000..4f05d208c9 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65217.txt @@ -0,0 +1,78 @@ +TPS65217 family of regulators + +Required properties: +- compatible: "ti,tps65217" +- reg: I2C slave address +- regulators: list of regulators provided by this controller, must be named + after their hardware counterparts: dcdc[1-3] and ldo[1-4] +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. Not all regulators for the given + device need to be present. The definition for each of these nodes is defined + using the standard binding for regulators found at + Documentation/devicetree/bindings/regulator/regulator.txt. + +Optional properties: +- ti,pmic-shutdown-controller: Telling the PMIC to shutdown on PWR_EN toggle. + + The valid names for regulators are: + tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4 + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps: tps@24 { + compatible = "ti,tps65217"; + ti,pmic-shutdown-controller; + + regulators { + dcdc1_reg: dcdc1 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2_reg: dcdc2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: dcc3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65218.txt b/Documentation/devicetree/bindings/regulator/tps65218.txt new file mode 100644 index 0000000000..54aded3b78 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65218.txt @@ -0,0 +1,83 @@ +TPS65218 family of regulators + +Required properties: +- compatible: "ti,tps65218" +- reg: I2C slave address + +- List of regulators provided by this controller, must be named + after their hardware counterparts: dcdc[1-6] and ldo1 +- This is the list of child nodes that specify the regulator + initialization data for defined regulators. Not all regulators for the given + device need to be present. The definition for each of these nodes is defined + using the standard binding for regulators found at ./regulator.txt. + + The valid names for regulators are: + tps65217: regulator-dcdc1, regulator-dcdc2, regulator-dcdc3, regulator-dcdc4, + regulator-dcdc5, regulator-dcdc6, regulator-ldo1, regulator-ls3. + Each regulator is defined using the standard binding for regulators. + +Example: +tps65218: tps65218@24 { + reg = <0x24>; + compatible = "ti,tps65218"; + interrupts = ; /* NMIn */ + interrupt-controller; + #interrupt-cells = <2>; + + dcdc1: regulator-dcdc1 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2: regulator-dcdc2 { + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3: regulator-dcdc3 { + regulator-name = "vdcdc3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc5: regulator-dcdc5 { + regulator-name = "v1_0bat"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc6: regulator-dcdc6 { + regulator-name = "v1_8bat"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: regulator-ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ls2: regulator-ls2 { + regulator-min-microamp = <100000>; + regulator-max-microamp = <1000000>; + }; + + ls3: regulator-ls3 { + regulator-min-microamp = <100000>; + regulator-max-microamp = <1000000>; + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt new file mode 100644 index 0000000000..8b40cac24d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt @@ -0,0 +1,135 @@ +TPS6586x family of regulators + +Required properties: +- compatible: "ti,tps6586x" +- reg: I2C slave address +- interrupts: the interrupt outputs of the controller +- #gpio-cells: number of cells to describe a GPIO +- gpio-controller: mark the device as a GPIO controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name (or the deprecated + regulator-compatible property if present), with valid values listed below. + The content of each sub-node is defined by the standard binding for + regulators; see regulator.txt. + sys, sm[0-2], ldo[0-9] and ldo_rtc +- sys-supply: The input supply for SYS. +- vin-sm0-supply: The input supply for the SM0. +- vin-sm1-supply: The input supply for the SM1. +- vin-sm2-supply: The input supply for the SM2. +- vinldo01-supply: The input supply for the LDO1 and LDO2 +- vinldo23-supply: The input supply for the LDO2 and LDO3 +- vinldo4-supply: The input supply for the LDO4 +- vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8 +- vinldo9-supply: The input supply for the LDO9 + +Optional properties: +- ti,system-power-controller: Telling whether or not this pmic is controlling + the system power. + +Each regulator is defined using the standard binding for regulators. + +Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver + take care of making proper parent child relationship. + +Example: + + pmu: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 88 0x4>; + + #gpio-cells = <2>; + gpio-controller; + + ti,system-power-controller; + + sys-supply = <&some_reg>; + vin-sm0-supply = <&some_reg>; + vin-sm1-supply = <&some_reg>; + vin-sm2-supply = <&some_reg>; + vinldo01-supply = <...>; + vinldo23-supply = <...>; + vinldo4-supply = <...>; + vinldo678-supply = <...>; + vinldo9-supply = <...>; + + regulators { + sys_reg: sys { + regulator-name = "vdd_sys"; + regulator-boot-on; + regulator-always-on; + }; + + sm0_reg: sm0 { + regulator-min-microvolt = < 725000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + sm1_reg: sm1 { + regulator-min-microvolt = < 725000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + sm2_reg: sm2 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <4550000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0_reg: ldo0 { + regulator-name = "PCIE CLK"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = < 725000>; + regulator-max-microvolt = <1500000>; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = < 725000>; + regulator-max-microvolt = <1500000>; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2475000>; + }; + + ldo5_reg: ldo5 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6_reg: ldo6 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7_reg: ldo7 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + ldo8_reg: ldo8 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: ldo9 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/twl-regulator.txt b/Documentation/devicetree/bindings/regulator/twl-regulator.txt new file mode 100644 index 0000000000..549f80436d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/twl-regulator.txt @@ -0,0 +1,80 @@ +TWL family of regulators + +Required properties: +For twl6030 regulators/LDOs +- compatible: + - "ti,twl6030-vaux1" for VAUX1 LDO + - "ti,twl6030-vaux2" for VAUX2 LDO + - "ti,twl6030-vaux3" for VAUX3 LDO + - "ti,twl6030-vmmc" for VMMC LDO + - "ti,twl6030-vpp" for VPP LDO + - "ti,twl6030-vusim" for VUSIM LDO + - "ti,twl6030-vana" for VANA LDO + - "ti,twl6030-vcxio" for VCXIO LDO + - "ti,twl6030-vdac" for VDAC LDO + - "ti,twl6030-vusb" for VUSB LDO + - "ti,twl6030-v1v8" for V1V8 LDO + - "ti,twl6030-v2v1" for V2V1 LDO + - "ti,twl6030-vdd1" for VDD1 SMPS + - "ti,twl6030-vdd2" for VDD2 SMPS + - "ti,twl6030-vdd3" for VDD3 SMPS +For twl6032 regulators/LDOs +- compatible: + - "ti,twl6032-ldo1" for LDO1 LDO + - "ti,twl6032-ldo2" for LDO2 LDO + - "ti,twl6032-ldo3" for LDO3 LDO + - "ti,twl6032-ldo4" for LDO4 LDO + - "ti,twl6032-ldo5" for LDO5 LDO + - "ti,twl6032-ldo6" for LDO6 LDO + - "ti,twl6032-ldo7" for LDO7 LDO + - "ti,twl6032-ldoln" for LDOLN LDO + - "ti,twl6032-ldousb" for LDOUSB LDO + - "ti,twl6032-smps3" for SMPS3 SMPS + - "ti,twl6032-smps4" for SMPS4 SMPS + - "ti,twl6032-vio" for VIO SMPS +For twl4030 regulators/LDOs +- compatible: + - "ti,twl4030-vaux1" for VAUX1 LDO + - "ti,twl4030-vaux2" for VAUX2 LDO + - "ti,twl5030-vaux2" for VAUX2 LDO + - "ti,twl4030-vaux3" for VAUX3 LDO + - "ti,twl4030-vaux4" for VAUX4 LDO + - "ti,twl4030-vmmc1" for VMMC1 LDO + - "ti,twl4030-vmmc2" for VMMC2 LDO + - "ti,twl4030-vpll1" for VPLL1 LDO + - "ti,twl4030-vpll2" for VPLL2 LDO + - "ti,twl4030-vsim" for VSIM LDO + - "ti,twl4030-vdac" for VDAC LDO + - "ti,twl4030-vintana2" for VINTANA2 LDO + - "ti,twl4030-vio" for VIO LDO + - "ti,twl4030-vdd1" for VDD1 SMPS + - "ti,twl4030-vdd2" for VDD2 SMPS + - "ti,twl4030-vintana1" for VINTANA1 LDO + - "ti,twl4030-vintdig" for VINTDIG LDO + - "ti,twl4030-vusb1v5" for VUSB1V5 LDO + - "ti,twl4030-vusb1v8" for VUSB1V8 LDO + - "ti,twl4030-vusb3v1" for VUSB3V1 LDO + +Optional properties: +- Any optional property defined in bindings/regulator/regulator.txt +For twl4030 regulators/LDOs: + - regulator-initial-mode: + - 0x08 - Sleep mode, the nominal output voltage is maintained with low power + consumption with low load current capability. + - 0x0e - Active mode, the regulator can deliver its nominal output voltage + with full-load current capability. + +Example: + + xyz: regulator@0 { + compatible = "ti,twl6030-vaux1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + }; + +For twl6030 regulators/LDOs: + + - ti,retain-on-reset: Does not turn off the supplies during warm + reset. Could be needed for VMMC, as TWL6030 + reset sequence for this signal does not comply + with the SD specification. diff --git a/Documentation/devicetree/bindings/regulator/vctrl.txt b/Documentation/devicetree/bindings/regulator/vctrl.txt new file mode 100644 index 0000000000..e940377cfd --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/vctrl.txt @@ -0,0 +1,49 @@ +Bindings for Voltage controlled regulators +========================================== + +Required properties: +-------------------- +- compatible : must be "vctrl-regulator". +- regulator-min-microvolt : smallest voltage consumers may set +- regulator-max-microvolt : largest voltage consumers may set +- ctrl-supply : The regulator supplying the control voltage. +- ctrl-voltage-range : an array of two integer values describing the range + (min/max) of the control voltage. The values specify + the control voltage needed to generate the corresponding + regulator-min/max-microvolt output voltage. + +Optional properties: +-------------------- +- ovp-threshold-percent : overvoltage protection (OVP) threshold of the + regulator in percent. Some regulators have an OVP + circuitry which shuts down the regulator when the + actual output voltage deviates beyond a certain + margin from the expected value for a given control + voltage. On larger voltage decreases this can occur + undesiredly since the output voltage does not adjust + immediately to changes in the control voltage. To + avoid this situation the vctrl driver breaks down + larger voltage decreases into multiple steps, where + each step is within the OVP threshold. +- min-slew-down-rate : Describes how slowly the regulator voltage will decay + down in the worst case (lightest expected load). + Specified in uV / us (like main regulator ramp rate). + This value is required when ovp-threshold-percent is + specified. + +Example: + + vctrl-reg { + compatible = "vctrl-regulator"; + regulator-name = "vctrl_reg"; + + ctrl-supply = <&ctrl_reg>; + + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + + ctrl-voltage-range = <200000 500000>; + + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; + }; diff --git a/Documentation/devicetree/bindings/regulator/vexpress.txt b/Documentation/devicetree/bindings/regulator/vexpress.txt new file mode 100644 index 0000000000..1c2e92c783 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/vexpress.txt @@ -0,0 +1,32 @@ +Versatile Express voltage regulators +------------------------------------ + +Requires node properties: +- "compatible" value: "arm,vexpress-volt" +- "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg + (see Documentation/devicetree/bindings/arm/vexpress-config.yaml + for more details) + +Required regulator properties: +- "regulator-name" +- "regulator-always-on" + +Optional regulator properties: +- "regulator-min-microvolt" +- "regulator-max-microvolt" + +See Documentation/devicetree/bindings/regulator/regulator.txt +for more details about the regulator properties. + +When no "regulator-[min|max]-microvolt" properties are defined, +the device is treated as fixed (or rather "read-only") regulator. + +Example: + volt@0 { + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "Cores"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml new file mode 100644 index 0000000000..3b16a25ba3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/vqmmc-ipq4019-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ4019 VQMMC SD LDO regulator + +maintainers: + - Robert Marko + +description: | + Qualcomm IPQ4019 SoC-s feature a built a build SD/EMMC controller, + in order to support both 1.8 and 3V I/O voltage levels an LDO + controller is also embedded. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + const: qcom,vqmmc-ipq4019-regulator + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + regulator@1948000 { + compatible = "qcom,vqmmc-ipq4019-regulator"; + reg = <0x01948000 0x4>; + regulator-name = "vqmmc"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml new file mode 100644 index 0000000000..11e378648b --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/wlf,arizona.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic/Wolfson Microelectronics Arizona/Madera class audio SoCs + +maintainers: + - patches@opensource.cirrus.com + +description: | + These devices are audio SoCs with extensive digital capabilities and a + range of analogue I/O. + + This document lists regulator specific bindings, see the primary binding + document. For Wolfson Microelectronic Arizona codecs ../mfd/wlf,arizona.yaml + and for Cirrus Logic Madera codecs ../mfd/madera.txt + +properties: + wlf,ldoena: + description: + GPIO specifier for the GPIO controlling LDOENA. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + + ldo1: + description: + Initial data for the LDO1 regulator. + $ref: regulator.yaml# + type: object + unevaluatedProperties: false + + micvdd: + description: + Initial data for the MICVDD regulator. + $ref: regulator.yaml# + type: object + unevaluatedProperties: false + +additionalProperties: true -- cgit v1.2.3