From e54def4ad8144ab15f826416e2e0f290ef1901b4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 19 Jun 2024 23:00:30 +0200 Subject: Adding upstream version 6.9.2. Signed-off-by: Daniel Baumann --- .../bindings/regulator/gpio-regulator.yaml | 4 +- .../bindings/regulator/infineon,ir38060.yaml | 45 ++++++ .../bindings/regulator/mcp16502-regulator.txt | 144 ----------------- .../bindings/regulator/microchip,mcp16502.yaml | 180 +++++++++++++++++++++ .../regulator/qcom,usb-vbus-regulator.yaml | 11 +- .../devicetree/bindings/regulator/ti,tps65132.yaml | 84 ++++++++++ .../bindings/regulator/tps65132-regulator.txt | 46 ------ 7 files changed, 321 insertions(+), 193 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml delete mode 100644 Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml create mode 100644 Documentation/devicetree/bindings/regulator/ti,tps65132.yaml delete mode 100644 Documentation/devicetree/bindings/regulator/tps65132-regulator.txt (limited to 'Documentation/devicetree/bindings/regulator') diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml index f4c1f36e52..a34e857546 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml @@ -47,6 +47,7 @@ properties: 1: HIGH Default is LOW if nothing else is specified. $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 maxItems: 8 items: enum: [0, 1] @@ -57,7 +58,8 @@ properties: regulator and matching GPIO configurations to achieve them. If there are no states in the "states" array, use a fixed regulator instead. $ref: /schemas/types.yaml#/definitions/uint32-matrix - maxItems: 8 + minItems: 2 + maxItems: 256 items: items: - description: Voltage in microvolts diff --git a/Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml b/Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml new file mode 100644 index 0000000000..e6ffbc2a22 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Infineon Buck Regulators with PMBUS interfaces + +maintainers: + - Not Me. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - infineon,ir38060 + - infineon,ir38064 + - infineon,ir38164 + - infineon,ir38263 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@34 { + compatible = "infineon,ir38060"; + reg = <0x34>; + + regulator-min-microvolt = <437500>; + regulator-max-microvolt = <1387500>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt deleted file mode 100644 index 451cc4e86b..0000000000 --- a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt +++ /dev/null @@ -1,144 +0,0 @@ -MCP16502 PMIC - -Required properties: -- compatible: "microchip,mcp16502" -- reg: I2C slave address -- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during - suspend-to-ram, keeping the PMIC into HIBERNATE mode; this - property is optional; -- regulators: A node that houses a sub-node for each regulator within - the device. Each sub-node is identified using the node's - name. The content of each sub-node is defined by the - standard binding for regulators; see regulator.txt. - -Regulators of MCP16502 PMIC: -1) VDD_IO - Buck (1.2 - 3.7 V) -2) VDD_DDR - Buck (0.6 - 1.85 V) -3) VDD_CORE - Buck (0.6 - 1.85 V) -4) VDD_OTHER - BUCK (0.6 - 1.85 V) -5) LDO1 - LDO (1.2 - 3.7 V) -6) LDO2 - LDO (1.2 - 3.7 V) - -Regulator modes: -2 - FPWM: higher precision, higher consumption -4 - AutoPFM: lower precision, lower consumption - -Each regulator is defined using the standard binding for regulators. - -Example: - -mcp16502@5b { - compatible = "microchip,mcp16502"; - reg = <0x5b>; - status = "okay"; - lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>; - - regulators { - VDD_IO { - regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; - regulator-initial-mode = <2>; - regulator-allowed-modes = <2>, <4>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - regulator-mode = <4>; - }; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-mode = <4>; - }; - }; - - VDD_DDR { - regulator-name = "VDD_DDR"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; - regulator-initial-mode = <2>; - regulator-allowed-modes = <2>, <4>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - regulator-mode = <4>; - }; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-mode = <4>; - }; - }; - - VDD_CORE { - regulator-name = "VDD_CORE"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; - regulator-initial-mode = <2>; - regulator-allowed-modes = <2>, <4>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - regulator-mode = <4>; - }; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-mode = <4>; - }; - }; - - VDD_OTHER { - regulator-name = "VDD_OTHER"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; - regulator-initial-mode = <2>; - regulator-allowed-modes = <2>, <4>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - regulator-mode = <4>; - }; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-mode = <4>; - }; - }; - - LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - }; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - LDO2 { - regulator-name = "LDO2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - }; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - }; -}; diff --git a/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml b/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml new file mode 100644 index 0000000000..1aca364678 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/microchip,mcp16502.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MCP16502 - High-Performance PMIC + +maintainers: + - Andrei Simion + +description: + The MCP16502 is an optimally integrated PMIC compatible + with Microchip's eMPUs(Embedded Microprocessor Units), + requiring Dynamic Voltage Scaling (DVS) with the use + of High-Performance mode (HPM). + +properties: + compatible: + const: microchip,mcp16502 + + lpm-gpios: + maxItems: 1 + description: GPIO for LPM pin. + Note that this GPIO must remain high during + suspend-to-ram, keeping the PMIC into HIBERNATE mode. + + reg: + maxItems: 1 + + regulators: + type: object + additionalProperties: false + description: List of regulators and its properties. + + patternProperties: + "^(VDD_(IO|CORE|DDR|OTHER)|LDO[1-2])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + + properties: + regulator-initial-mode: + enum: [2, 4] + default: 2 + description: Initial operating mode + + regulator-allowed-modes: + items: + enum: [2, 4] + description: Supported modes + 2 - FPWM higher precision, higher consumption + 4 - AutoPFM lower precision, lower consumption + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + + regulators { + VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1250000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml index 534f87e987..33ae1f7868 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -19,8 +19,15 @@ allOf: properties: compatible: - enum: - - qcom,pm8150b-vbus-reg + oneOf: + - enum: + - qcom,pm8150b-vbus-reg + - items: + - enum: + - qcom,pm4125-vbus-reg + - qcom,pm6150-vbus-reg + - qcom,pmi632-vbus-reg + - const: qcom,pm8150b-vbus-reg reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml new file mode 100644 index 0000000000..6a6d1a3d6f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/ti,tps65132.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS65132 Dual Output Power Regulators + +maintainers: + - devicetree@vger.kernel.org + +description: | + The TPS65132 is designed to supply positive/negative driven applications. + + Datasheet is available at: + https://www.ti.com/lit/gpn/tps65132 + +properties: + compatible: + enum: + - ti,tps65132 + + reg: + maxItems: 1 + +patternProperties: + "^out[pn]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single regulator. + + properties: + enable-gpios: + maxItems: 1 + description: + GPIO specifier to enable the GPIO control (on/off) for regulator. + + active-discharge-gpios: + maxItems: 1 + description: + GPIO specifier to actively discharge the delay mechanism. + + ti,active-discharge-time-us: + description: Regulator active discharge time in microseconds. + + dependencies: + active-discharge-gpios: [ 'ti,active-discharge-time-us' ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + + outp { + regulator-name = "outp"; + regulator-boot-on; + regulator-always-on; + enable-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + }; + + outn { + regulator-name = "outn"; + regulator-boot-on; + regulator-always-on; + regulator-active-discharge = <0>; + enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt deleted file mode 100644 index 3a3505520c..0000000000 --- a/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt +++ /dev/null @@ -1,46 +0,0 @@ -TPS65132 regulators - -Required properties: -- compatible: "ti,tps65132" -- reg: I2C slave address - -Optional Subnode: -Device supports two regulators OUTP and OUTN. A sub node within the - device node describe the properties of these regulators. The sub-node - names must be as follows: - -For regulator outp, the sub node name should be "outp". - -For regulator outn, the sub node name should be "outn". - --enable-gpios:(active high, output) Regulators are controlled by the input pins. - If it is connected to GPIO through host system then provide the - gpio number as per gpio.txt. --active-discharge-gpios: (active high, output) Some configurations use delay mechanisms - on the enable pin, to keep the regulator enabled for some time after - the enable signal goes low. This GPIO is used to actively discharge - the delay mechanism. Requires specification of ti,active-discharge-time-us --ti,active-discharge-time-us: how long the active discharge gpio should be - asserted for during active discharge, in microseconds. - -Each regulator is defined using the standard binding for regulators. - -Example: - - tps65132@3e { - compatible = "ti,tps65132"; - reg = <0x3e>; - - outp { - regulator-name = "outp"; - regulator-boot-on; - regulator-always-on; - enable-gpios = <&gpio 23 0>; - }; - - outn { - regulator-name = "outn"; - regulator-boot-on; - regulator-always-on; - regulator-active-discharge = <0>; - enable-gpios = <&gpio 40 0>; - }; - }; -- cgit v1.2.3