From 85c675d0d09a45a135bddd15d7b385f8758c32fb Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 18 May 2024 19:35:05 +0200 Subject: Adding upstream version 6.7.7. Signed-off-by: Daniel Baumann --- .../bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml | 37 +- .../soc/mediatek/mediatek,mt7986-wo-ccif.yaml | 1 + .../devicetree/bindings/soc/mediatek/mtk-svs.yaml | 1 + .../bindings/soc/nuvoton/nuvoton,gfxi.yaml | 39 ++ .../devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 2 + .../bindings/soc/qcom/qcom,pmic-glink.yaml | 19 + .../bindings/soc/renesas/renesas,rzg2l-sysc.yaml | 1 + .../devicetree/bindings/soc/renesas/renesas.yaml | 28 +- .../devicetree/bindings/soc/rockchip/grf.yaml | 1 + .../devicetree/bindings/soc/sti/st,sti-syscon.yaml | 46 +++ .../bindings/soc/tegra/nvidia,tegra20-pmc.yaml | 416 +++++++++++++++++++++ 11 files changed, 587 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/soc/nuvoton/nuvoton,gfxi.yaml create mode 100644 Documentation/devicetree/bindings/soc/sti/st,sti-syscon.yaml create mode 100644 Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml (limited to 'Documentation/devicetree/bindings/soc') diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml index ec888f48ca..e802e25923 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml @@ -64,6 +64,7 @@ patternProperties: description: A channel managed by this controller type: object + additionalProperties: false properties: reg: @@ -100,6 +101,32 @@ patternProperties: Channel assigned Rx time-slots within the Rx time-slots routed by the TSA to this cell. + compatible: + items: + - enum: + - fsl,mpc885-scc-qmc-hdlc + - fsl,mpc866-scc-qmc-hdlc + - const: fsl,cpm1-scc-qmc-hdlc + - const: fsl,qmc-hdlc + + fsl,framer: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the framer node. The framer is in charge of an E1/T1 line + interface connected to the TDM bus. It can be used to get the E1/T1 line + status such as link up/down. + + allOf: + - if: + properties: + compatible: + not: + contains: + const: fsl,qmc-hdlc + then: + properties: + fsl,framer: false + required: - reg - fsl,tx-ts-mask @@ -137,7 +164,7 @@ examples: channel@16 { /* Ch16 : First 4 even TS from all routed from TSA */ reg = <16>; - fsl,mode = "transparent"; + fsl,operational-mode = "transparent"; fsl,reverse-data; fsl,tx-ts-mask = <0x00000000 0x000000aa>; fsl,rx-ts-mask = <0x00000000 0x000000aa>; @@ -146,7 +173,7 @@ examples: channel@17 { /* Ch17 : First 4 odd TS from all routed from TSA */ reg = <17>; - fsl,mode = "transparent"; + fsl,operational-mode = "transparent"; fsl,reverse-data; fsl,tx-ts-mask = <0x00000000 0x00000055>; fsl,rx-ts-mask = <0x00000000 0x00000055>; @@ -154,9 +181,13 @@ examples: channel@19 { /* Ch19 : 8 TS (TS 8..15) from all routed from TSA */ + compatible = "fsl,mpc885-scc-qmc-hdlc", + "fsl,cpm1-scc-qmc-hdlc", + "fsl,qmc-hdlc"; reg = <19>; - fsl,mode = "hdlc"; + fsl,operational-mode = "hdlc"; fsl,tx-ts-mask = <0x00000000 0x0000ff00>; fsl,rx-ts-mask = <0x00000000 0x0000ff00>; + fsl,framer = <&framer>; }; }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml index f0fa92b04b..3b212f26ab 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml @@ -20,6 +20,7 @@ properties: items: - enum: - mediatek,mt7986-wo-ccif + - mediatek,mt7988-wo-ccif - const: syscon reg: diff --git a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml index f21eb907ee..7eda63d568 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml @@ -22,6 +22,7 @@ properties: compatible: enum: - mediatek,mt8183-svs + - mediatek,mt8188-svs - mediatek,mt8192-svs reg: diff --git a/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,gfxi.yaml b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,gfxi.yaml new file mode 100644 index 0000000000..0222a43977 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,gfxi.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/nuvoton/nuvoton,gfxi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Graphics Core Information block in Nuvoton SoCs + +maintainers: + - Joseph Liu + - Marvin Lin + +description: + The Graphics Core Information (GFXI) are a block of registers in Nuvoton SoCs + that analyzes Graphics core behavior and provides information in registers. + +properties: + compatible: + items: + - enum: + - nuvoton,npcm750-gfxi + - nuvoton,npcm845-gfxi + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + gfxi: gfxi@e000 { + compatible = "nuvoton,npcm750-gfxi", "syscon"; + reg = <0xe000 0x100>; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml index 8a4b7ba3aa..7b031ef096 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -52,6 +52,8 @@ properties: iommus: maxItems: 1 + dma-coherent: true + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml index bceb479f74..422921cf1f 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -35,6 +35,12 @@ properties: '#size-cells': const: 0 + orientation-gpios: + description: Array of input gpios for the Type-C connector orientation indication. + The GPIO indication is used to detect the orientation of the Type-C connector. + The array should contain a gpio entry for each PMIC Glink connector, in reg order. + It is defined that GPIO active level means "CC2" or Reversed/Flipped orientation. + patternProperties: '^connector@\d$': $ref: /schemas/connector/usb-connector.yaml# @@ -44,6 +50,19 @@ patternProperties: required: - compatible +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - qcom,sm8450-pmic-glink + - qcom,sm8550-pmic-glink + then: + properties: + orientation-gpios: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml index e52e176d8c..4386b2c3fa 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml @@ -23,6 +23,7 @@ properties: - renesas,r9a07g043-sysc # RZ/G2UL and RZ/Five - renesas,r9a07g044-sysc # RZ/G2{L,LC} - renesas,r9a07g054-sysc # RZ/V2L + - renesas,r9a08g045-sysc # RZ/G3S reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml index 53b95f348f..16ca3ff7b1 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml @@ -302,7 +302,7 @@ properties: - description: R-Car E3 (R8A77990) items: - enum: - - renesas,ebisu # Ebisu (RTP0RC77990SEB0010S) + - renesas,ebisu # Ebisu (RTP0RC77990SEB0010S), Ebisu-4D (RTP0RC77990SEB0020S) - const: renesas,r8a77990 - description: R-Car D3 (R8A77995) @@ -335,6 +335,13 @@ properties: - const: renesas,spider-cpu - const: renesas,r8a779f0 + - description: R-Car S4-8 (R8A779F4) + items: + - enum: + - renesas,s4sk # R-Car S4 Starter Kit board (Y-ASK-RCAR-S4-1000BASE-T#WS12) + - const: renesas,r8a779f4 + - const: renesas,r8a779f0 + - description: R-Car V4H (R8A779G0) items: - enum: @@ -474,6 +481,25 @@ properties: - renesas,rzv2mevk2 # RZ/V2M Eval Board v2.0 - const: renesas,r9a09g011 + - description: RZ/G3S (R9A08G045) + items: + - enum: + - renesas,r9a08g045s33 # PCIe support + - const: renesas,r9a08g045 + + - description: RZ/G3S SMARC Module (SoM) + items: + - const: renesas,rzg3s-smarcm # RZ/G3S SMARC Module (SoM) + - const: renesas,r9a08g045s33 # PCIe support + - const: renesas,r9a08g045 + + - description: RZ SMARC Carrier-II Evaluation Kit + items: + - const: renesas,smarc2-evk # RZ SMARC Carrier-II EVK + - const: renesas,rzg3s-smarcm # RZ/G3S SMARC SoM + - const: renesas,r9a08g045s33 # PCIe support + - const: renesas,r9a08g045 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index e4fa6a07b4..1309bf5ae0 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -233,6 +233,7 @@ allOf: - rockchip,rk3399-grf - rockchip,rk3399-pmugrf - rockchip,rk3568-pmugrf + - rockchip,rk3588-pmugrf - rockchip,rv1108-grf - rockchip,rv1108-pmugrf diff --git a/Documentation/devicetree/bindings/soc/sti/st,sti-syscon.yaml b/Documentation/devicetree/bindings/soc/sti/st,sti-syscon.yaml new file mode 100644 index 0000000000..5f97d9ff17 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/sti/st,sti-syscon.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/sti/st,sti-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi platform sysconfig + +maintainers: + - Patrice Chotard + +description: | + Binding for the various sysconfig nodes used within the STi + platform device-tree to point to some common configuration + registers used by other nodes. + +properties: + compatible: + items: + - enum: + - st,stih407-core-syscfg + - st,stih407-flash-syscfg + - st,stih407-front-syscfg + - st,stih407-lpm-syscfg + - st,stih407-rear-syscfg + - st,stih407-sbc-reg-syscfg + - st,stih407-sbc-syscfg + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscfg_sbc: syscon@9620000 { + compatible = "st,stih407-sbc-syscfg", "syscon"; + reg = <0x9620000 0x1000>; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml new file mode 100644 index 0000000000..b86f6f53ca --- /dev/null +++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml @@ -0,0 +1,416 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/tegra/nvidia,tegra20-pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra Power Management Controller (PMC) + +maintainers: + - Thierry Reding + - Jonathan Hunter + +properties: + compatible: + enum: + - nvidia,tegra20-pmc + - nvidia,tegra30-pmc + - nvidia,tegra114-pmc + - nvidia,tegra124-pmc + - nvidia,tegra210-pmc + + reg: + maxItems: 1 + + clock-names: + items: + # Tegra clock of the same name + - const: pclk + # 32 KHz clock input + - const: clk32k_in + + clocks: + maxItems: 2 + + '#clock-cells': + const: 1 + description: | + Tegra PMC has clk_out_1, clk_out_2, and clk_out_3. PMC also has blink + control which allows 32Khz clock output to Tegra blink pad. + + Consumer of PMC clock should specify the desired clock by having the + clock ID in its "clocks" phandle cell with PMC clock provider. See + include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC clock IDs. + + '#interrupt-cells': + const: 2 + description: Specifies number of cells needed to encode an interrupt + source. + + interrupt-controller: true + + nvidia,invert-interrupt: + $ref: /schemas/types.yaml#/definitions/flag + description: Inverts the PMU interrupt signal. The PMU is an external Power + Management Unit, whose interrupt output signal is fed into the PMC. This + signal is optionally inverted, and then fed into the ARM GIC. The PMC is + not involved in the detection or handling of this interrupt signal, + merely its inversion. + + nvidia,core-power-req-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: core power request active-high + + nvidia,sys-clock-req-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: system clock request active-high + + nvidia,combined-power-req: + $ref: /schemas/types.yaml#/definitions/flag + description: combined power request for CPU and core + + nvidia,cpu-pwr-good-en: + $ref: /schemas/types.yaml#/definitions/flag + description: CPU power good signal from external PMIC to PMC is enabled + + nvidia,suspend-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: the suspend mode that the platform should use + oneOf: + - description: LP0, CPU + Core voltage off and DRAM in self-refresh + const: 0 + - description: LP1, CPU voltage off and DRAM in self-refresh + const: 1 + - description: LP2, CPU voltage off + const: 2 + + nvidia,cpu-pwr-good-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU power good time in microseconds + + nvidia,cpu-pwr-off-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU power off time in microseconds + + nvidia,core-pwr-good-time: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: core power good time in microseconds + items: + - description: oscillator stable time + - description: power stable time + + nvidia,core-pwr-off-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: core power off time in microseconds + + nvidia,lp0-vec: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + Starting address and length of LP0 vector. The LP0 vector contains the + warm boot code that is executed by AVP when resuming from the LP0 state. + The AVP (Audio-Video Processor) is an ARM7 processor and always being + the first boot processor when chip is power on or resume from deep sleep + mode. When the system is resumed from the deep sleep mode, the warm boot + code will restore some PLLs, clocks and then brings up CPU0 for resuming + the system. + items: + - description: starting address of LP0 vector + - description: length of LP0 vector + + core-supply: + description: phandle to voltage regulator connected to the SoC core power + rail + + core-domain: + type: object + description: The vast majority of hardware blocks of Tegra SoC belong to a + core power domain, which has a dedicated voltage rail that powers the + blocks. + additionalProperties: false + properties: + operating-points-v2: + description: Should contain level, voltages and opp-supported-hw + property. The supported-hw is a bitfield indicating SoC speedo or + process ID mask. + + "#power-domain-cells": + const: 0 + + required: + - operating-points-v2 + - "#power-domain-cells" + + i2c-thermtrip: + type: object + description: On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode + exists, hardware-triggered thermal reset will be enabled. + additionalProperties: false + properties: + nvidia,i2c-controller-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: ID of I2C controller to send poweroff command to PMU. + Valid values are described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" + of the Tegra K1 Technical Reference Manual. + + nvidia,bus-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: bus address of the PMU on the I2C bus + + nvidia,reg-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: PMU I2C register address to issue poweroff command + + nvidia,reg-data: + $ref: /schemas/types.yaml#/definitions/uint32 + description: power-off command to write to PMU + + nvidia,pinmux-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Pinmux used by the hardware when issuing power-off command. + Defaults to 0. Valid values are described in section 12.5.2 "Pinmux + Support" of the Tegra4 Technical Reference Manual. + + required: + - nvidia,i2c-controller-id + - nvidia,bus-addr + - nvidia,reg-addr + - nvidia,reg-data + + powergates: + type: object + additionalProperties: false + description: | + This node contains a hierarchy of power domain nodes, which should match + the powergates on the Tegra SoC. Each powergate node represents a power- + domain on the Tegra SoC that can be power-gated by the Tegra PMC. + + Hardware blocks belonging to a power domain should contain "power-domains" + property that is a phandle pointing to corresponding powergate node. + + The name of the powergate node should be one of the below. Note that not + every powergate is applicable to all Tegra devices and the following list + shows which powergates are applicable to which devices. + + Please refer to Tegra TRM for mode details on the powergate nodes to use + for each power-gate block inside Tegra. + + Name Description Devices Applicable + -------------------------------------------------------------- + 3d 3D Graphics Tegra20/114/124/210 + 3d0 3D Graphics 0 Tegra30 + 3d1 3D Graphics 1 Tegra30 + aud Audio Tegra210 + dfd Debug Tegra210 + dis Display A Tegra114/124/210 + disb Display B Tegra114/124/210 + heg 2D Graphics Tegra30/114/124/210 + iram Internal RAM Tegra124/210 + mpe MPEG Encode All + nvdec NVIDIA Video Decode Engine Tegra210 + nvjpg NVIDIA JPEG Engine Tegra210 + pcie PCIE Tegra20/30/124/210 + sata SATA Tegra30/124/210 + sor Display interfaces Tegra124/210 + ve2 Video Encode Engine 2 Tegra210 + venc Video Encode Engine All + vdec Video Decode Engine Tegra20/30/114/124 + vic Video Imaging Compositor Tegra124/210 + xusba USB Partition A Tegra114/124/210 + xusbb USB Partition B Tegra114/124/210 + xusbc USB Partition C Tegra114/124/210 + + patternProperties: + "^[a-z0-9]+$": + type: object + additionalProperties: false + properties: + clocks: + minItems: 1 + maxItems: 10 + + resets: + minItems: 1 + maxItems: 8 + + power-domains: + maxItems: 1 + + '#power-domain-cells': + const: 0 + description: Must be 0. + + required: + - clocks + - resets + - '#power-domain-cells' + + pinmux: + type: object + additionalProperties: + type: object + description: | + This is a pad configuration node. On Tegra SoCs a pad is a set of pins + which are configured as a group. The pin grouping is a fixed attribute + of the hardware. The PMC can be used to set pad power state and + signaling voltage. A pad can be either in active or power down mode. + The support for power state and signaling voltage configuration varies + depending on the pad in question. 3.3V and 1.8V signaling voltages are + supported on pins where software controllable signaling voltage + switching is available. + + The pad configuration state nodes are placed under the pmc node and + they are referred to by the pinctrl client properties. For more + information see: + + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + + The pad name should be used as the value of the pins property in pin + configuration nodes. + + The following pads are present on Tegra124 and Tegra132: + + audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, + hsic, hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, + pex-cntrl, sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, + usb_bias + + The following pads are present on Tegra210: + + audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg, + debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, + hdmi, hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, + sdmmc1, sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias + additionalProperties: false + properties: + pins: + $ref: /schemas/types.yaml#/definitions/string-array + description: Must contain name of the pad(s) to be configured. + + low-power-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: Configure the pad into power down mode. + + low-power-disable: + $ref: /schemas/types.yaml#/definitions/flag + description: Configure the pad into active mode. + + power-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or + TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. The + values are defined in: + + include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h + + Power state can be configured on all Tegra124 and Tegra132 pads. + None of the Tegra124 or Tegra132 pads support signaling voltage + switching. All of the listed Tegra210 pads except pex-cntrl support + power state configuration. Signaling voltage switching is supported + on the following Tegra210 pads: + + audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1, sdmmc3, + spi, spi-hv, uart + + required: + - pins + +required: + - compatible + - reg + - clock-names + - clocks + - '#clock-cells' + +allOf: + - if: + properties: + compatible: + contains: + const: nvidia,tegra124-pmc + then: + properties: + pinmux: + additionalProperties: + type: object + properties: + pins: + items: + enum: [ audio, bb, cam, comp, csia, csb, cse, dsi, dsib, + dsic, dsid, hdmi, hsic, hv, lvds, mipi-bias, nand, + pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1, + sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, + usb_bias ] + + - if: + properties: + compatible: + contains: + const: nvidia,tegra210-pmc + then: + properties: + pinmux: + additionalProperties: + type: object + properties: + pins: + items: + enum: [ audio, audio-hv, cam, csia, csib, csic, csid, csie, + csif, dbg, debug-nonao, dmic, dp, dsi, dsib, dsic, + dsid, emmc, emmc2, gpio, hdmi, hsic, lvds, mipi-bias, + pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1, + sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, + usb-bias ] + +additionalProperties: false + +dependencies: + "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] + "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] + "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"] + +examples: + - | + #include + #include + #include + + pmc@7000e400 { + compatible = "nvidia,tegra210-pmc"; + reg = <0x7000e400 0x400>; + core-supply = <®ulator>; + clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; + + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + + pd_core: core-domain { + operating-points-v2 = <&core_opp_table>; + #power-domain-cells = <0>; + }; + + powergates { + pd_audio: aud { + clocks = <&tegra_car TEGRA210_CLK_APE>, + <&tegra_car TEGRA210_CLK_APB2APE>; + resets = <&tegra_car 198>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_xusbss: xusba { + clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>; + resets = <&tegra_car TEGRA210_CLK_XUSB_SS>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + }; + }; -- cgit v1.2.3