From 34996e42f82bfd60bc2c191e5cae3c6ab233ec6c Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 7 Aug 2024 15:11:27 +0200 Subject: Merging upstream version 6.9.7. Signed-off-by: Daniel Baumann --- Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml') diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml index 6734f4d3aa..9b3ea23654 100644 --- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml +++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml @@ -37,10 +37,11 @@ properties: description: Should specify the GPIO detecting a VBus insertion maxItems: 1 - vbus-regulator: - description: Should specify the regulator supplying current drawn from - the VBus line. - $ref: /schemas/types.yaml#/definitions/phandle + vbus-supply: + description: regulator supplying VBUS. It will be enabled and disabled + dynamically in OTG mode. If the regulator is controlled by a + GPIO line, this should be modeled as a regulator-fixed and + referenced by this supply. wakeup-source: description: @@ -65,7 +66,7 @@ examples: vcc-supply = <&hsusb1_vcc_regulator>; reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; - vbus-regulator = <&vbus_regulator>; + vbus-supply = <&vbus_regulator>; #phy-cells = <0>; }; -- cgit v1.2.3