From 7f3a4257159dea8e7ef66d1a539dc6df708b8ed3 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 7 Aug 2024 15:17:46 +0200 Subject: Adding upstream version 6.10.3. Signed-off-by: Daniel Baumann --- Documentation/devicetree/bindings/Makefile | 36 +- .../access-controllers/access-controllers.yaml | 84 ++++ .../arm/altera/socfpga-sdram-controller.txt | 12 - Documentation/devicetree/bindings/arm/amlogic.yaml | 13 + Documentation/devicetree/bindings/arm/apm/scu.txt | 17 - .../devicetree/bindings/arm/aspeed/aspeed.yaml | 6 + .../devicetree/bindings/arm/bcm/brcm,bcm4708.yaml | 2 + .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 30 ++ Documentation/devicetree/bindings/arm/fsl.yaml | 22 +- .../devicetree/bindings/arm/keystone/ti,sci.yaml | 5 - .../bindings/arm/marvell/armada-37xx.txt | 32 -- .../bindings/arm/qcom,coresight-tpda.yaml | 34 +- Documentation/devicetree/bindings/arm/qcom.yaml | 18 +- .../devicetree/bindings/arm/rockchip.yaml | 48 +- .../devicetree/bindings/arm/stm32/st,mlahb.yaml | 3 +- Documentation/devicetree/bindings/arm/sunxi.yaml | 25 + .../devicetree/bindings/ata/ahci-da850.txt | 18 - .../devicetree/bindings/ata/fsl,imx-pata.yaml | 42 ++ Documentation/devicetree/bindings/ata/imx-pata.txt | 16 - .../devicetree/bindings/ata/ti,da850-ahci.yaml | 39 ++ .../devicetree/bindings/bus/st,stm32-etzpc.yaml | 96 ++++ .../bindings/bus/st,stm32mp25-rifsc.yaml | 105 +++++ .../bindings/clock/airoha,en7523-scu.yaml | 31 +- .../devicetree/bindings/clock/fixed-clock.yaml | 9 + .../bindings/clock/fixed-factor-clock.yaml | 9 + .../bindings/clock/google,gs101-clock.yaml | 55 ++- .../bindings/clock/loongson,ls2k-clk.yaml | 4 +- .../bindings/clock/nxp,imx95-blk-ctl.yaml | 56 +++ .../clock/nxp,imx95-display-master-csr.yaml | 64 +++ .../devicetree/bindings/clock/qcom,hfpll.txt | 63 --- .../devicetree/bindings/clock/qcom,hfpll.yaml | 69 +++ .../bindings/clock/renesas,rzg2l-cpg.yaml | 18 +- .../bindings/clock/samsung,s3c6400-clock.yaml | 57 +++ .../bindings/clock/samsung,s3c64xx-clock.txt | 76 --- .../bindings/clock/sophgo,cv1800-clk.yaml | 3 +- .../bindings/clock/st,stm32mp25-rcc.yaml | 172 ++++++- .../bindings/cpufreq/cpufreq-qcom-hw.yaml | 2 + .../bindings/crypto/nvidia,tegra234-se-aes.yaml | 52 +++ .../bindings/crypto/nvidia,tegra234-se-hash.yaml | 52 +++ .../devicetree/bindings/crypto/omap-sham.txt | 28 -- .../bindings/crypto/qcom,inline-crypto-engine.yaml | 1 + .../devicetree/bindings/crypto/st,stm32-cryp.yaml | 4 + .../devicetree/bindings/crypto/st,stm32-hash.yaml | 4 + .../bindings/crypto/starfive,jh7110-crypto.yaml | 30 +- .../devicetree/bindings/crypto/ti,omap-sham.yaml | 56 +++ .../bindings/display/atmel,lcdc-display.yaml | 103 +++++ .../devicetree/bindings/display/atmel,lcdc.txt | 87 ---- .../devicetree/bindings/display/atmel,lcdc.yaml | 70 +++ .../bindings/display/bridge/ite,it6505.yaml | 8 +- .../bindings/display/bridge/lvds-codec.yaml | 1 + .../display/bridge/microchip,sam9x75-lvds.yaml | 55 +++ .../bindings/display/bridge/toshiba,tc358775.yaml | 39 +- .../bindings/display/exynos/exynos_dp.txt | 112 ----- .../bindings/display/mediatek/mediatek,gamma.yaml | 5 + .../bindings/display/msm/dp-controller.yaml | 1 + .../bindings/display/msm/qcom,sm6350-mdss.yaml | 9 + .../bindings/display/panel/abt,y030xx067a.yaml | 4 +- .../display/panel/asus,z00t-tm5p5-nt35596.yaml | 5 +- .../bindings/display/panel/boe,bf060y8m-aj0.yaml | 4 +- .../bindings/display/panel/boe,himax8279d.yaml | 4 +- .../display/panel/boe,th101mb31ig002-28a.yaml | 4 +- .../bindings/display/panel/boe,tv101wum-nl6.yaml | 2 +- .../bindings/display/panel/elida,kd35t133.yaml | 5 +- .../display/panel/fascontek,fs035vg158.yaml | 3 + .../display/panel/feixin,k101-im2ba02.yaml | 5 +- .../bindings/display/panel/himax,hx83112a.yaml | 4 +- .../bindings/display/panel/himax,hx8394.yaml | 3 +- .../bindings/display/panel/ilitek,ili9163.yaml | 4 +- .../bindings/display/panel/ilitek,ili9322.yaml | 3 + .../bindings/display/panel/ilitek,ili9341.yaml | 3 +- .../bindings/display/panel/ilitek,ili9805.yaml | 4 +- .../bindings/display/panel/ilitek,ili9881c.yaml | 5 +- .../bindings/display/panel/innolux,ej030na.yaml | 4 +- .../bindings/display/panel/innolux,p097pfg.yaml | 4 +- .../bindings/display/panel/jadard,jd9365da-h3.yaml | 3 +- .../bindings/display/panel/jdi,lpm102a188a.yaml | 4 +- .../bindings/display/panel/jdi,lt070me05000.yaml | 4 +- .../display/panel/kingdisplay,kd035g6-54nt.yaml | 4 +- .../display/panel/leadtek,ltk035c5444t.yaml | 3 + .../display/panel/leadtek,ltk050h3146w.yaml | 5 +- .../display/panel/leadtek,ltk500hd1829.yaml | 5 +- .../bindings/display/panel/lg,lg4573.yaml | 3 +- .../bindings/display/panel/lg,sw43408.yaml | 62 +++ .../bindings/display/panel/lgphilips,lb035q02.yaml | 3 + .../bindings/display/panel/nec,nl8048hl11.yaml | 4 +- .../bindings/display/panel/newvision,nv3051d.yaml | 4 +- .../bindings/display/panel/novatek,nt35510.yaml | 5 +- .../bindings/display/panel/novatek,nt35950.yaml | 7 +- .../bindings/display/panel/novatek,nt36523.yaml | 29 +- .../bindings/display/panel/novatek,nt36672a.yaml | 4 +- .../display/panel/olimex,lcd-olinuxino.yaml | 4 +- .../bindings/display/panel/panel-common-dual.yaml | 47 ++ .../bindings/display/panel/panel-mipi-dbi-spi.yaml | 3 + .../bindings/display/panel/panel-simple-dsi.yaml | 4 + .../bindings/display/panel/panel-simple.yaml | 17 +- .../bindings/display/panel/raydium,rm67191.yaml | 4 +- .../bindings/display/panel/raydium,rm692e5.yaml | 4 +- .../bindings/display/panel/raydium,rm69380.yaml | 89 ++++ .../display/panel/rocktech,jh057n00900.yaml | 2 + .../bindings/display/panel/ronbo,rb070d30.yaml | 2 +- .../display/panel/samsung,amoled-mipi-dsi.yaml | 4 +- .../bindings/display/panel/samsung,ams495qa01.yaml | 5 +- .../bindings/display/panel/samsung,ld9040.yaml | 4 +- .../bindings/display/panel/samsung,lms380kf01.yaml | 3 +- .../bindings/display/panel/samsung,lms397kf04.yaml | 3 +- .../bindings/display/panel/samsung,s6d16d0.yaml | 4 +- .../bindings/display/panel/samsung,s6d27a1.yaml | 3 +- .../bindings/display/panel/samsung,s6d7aa0.yaml | 3 +- .../bindings/display/panel/samsung,s6e63m0.yaml | 4 +- .../display/panel/samsung,s6e88a0-ams452ef01.yaml | 5 +- .../bindings/display/panel/samsung,s6e8aa0.yaml | 4 +- .../bindings/display/panel/sharp,lq101r1sx01.yaml | 4 +- .../bindings/display/panel/sharp,ls043t1le01.yaml | 4 +- .../bindings/display/panel/sharp,ls060t1sx01.yaml | 4 +- .../bindings/display/panel/sitronix,st7789v.yaml | 4 +- .../bindings/display/panel/sony,acx424akp.yaml | 5 +- .../bindings/display/panel/sony,acx565akm.yaml | 3 + .../bindings/display/panel/sony,td4353-jdi.yaml | 5 +- .../display/panel/sony,tulip-truly-nt35521.yaml | 3 +- .../bindings/display/panel/synaptics,r63353.yaml | 6 +- .../devicetree/bindings/display/panel/tpo,td.yaml | 4 +- .../bindings/display/panel/tpo,tpg110.yaml | 3 +- .../bindings/display/panel/visionox,rm69299.yaml | 3 +- .../bindings/display/panel/xinpeng,xpp055c272.yaml | 5 +- .../display/rockchip/rockchip,dw-hdmi.yaml | 5 + .../display/rockchip/rockchip,inno-hdmi.yaml | 5 + .../display/rockchip/rockchip,rk3066-hdmi.yaml | 7 + .../display/samsung/samsung,exynos5-dp.yaml | 163 +++++++ .../display/tegra/nvidia,tegra20-host1x.yaml | 11 + .../devicetree/bindings/dma/fsl,edma.yaml | 139 ++++-- .../devicetree/bindings/dma/fsl,imx-sdma.yaml | 1 + .../devicetree/bindings/dma/qcom_hidma_mgmt.txt | 95 ---- .../bindings/dma/snps,dma-spear1340.yaml | 42 +- .../devicetree/bindings/dma/snps,dw-axi-dmac.yaml | 1 + .../devicetree/bindings/dma/st,stm32-dma.yaml | 4 + .../devicetree/bindings/dma/st,stm32-dmamux.yaml | 4 + .../devicetree/bindings/firmware/arm,scmi.yaml | 54 ++- .../bindings/fpga/xlnx,fpga-selectmap.yaml | 86 ++++ .../bindings/gpio/brcm,brcmstb-gpio.yaml | 3 + .../bindings/gpio/microchip,mpfs-gpio.yaml | 17 +- .../bindings/gpio/raspberrypi,firmware-gpio.txt | 30 -- .../bindings/gpu/arm,mali-valhall-csf.yaml | 147 ++++++ .../devicetree/bindings/hwmon/adc128d818.txt | 38 -- .../devicetree/bindings/hwmon/adi,adm1275.yaml | 4 +- Documentation/devicetree/bindings/hwmon/as370.txt | 11 - .../devicetree/bindings/hwmon/ibm,opal-sensor.yaml | 37 ++ .../devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt | 25 - .../devicetree/bindings/hwmon/ibmpowernv.txt | 23 - Documentation/devicetree/bindings/hwmon/lm87.txt | 30 -- .../devicetree/bindings/hwmon/max6650.txt | 28 -- .../devicetree/bindings/hwmon/maxim,max6650.yaml | 70 +++ .../bindings/hwmon/pmbus/adi,adp1050.yaml | 49 ++ .../devicetree/bindings/hwmon/pwm-fan.txt | 1 - .../devicetree/bindings/hwmon/st,stts751.yaml | 41 ++ .../devicetree/bindings/hwmon/stts751.txt | 15 - .../devicetree/bindings/hwmon/syna,as370.yaml | 32 ++ .../devicetree/bindings/hwmon/ti,adc128d818.yaml | 63 +++ .../devicetree/bindings/hwmon/ti,lm87.yaml | 69 +++ Documentation/devicetree/bindings/i2c/i2c-pnx.txt | 34 -- .../devicetree/bindings/i2c/nxp,pnx-i2c.yaml | 46 ++ .../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 19 + .../devicetree/bindings/i2c/renesas,riic.yaml | 19 +- .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 4 + .../devicetree/bindings/iio/accel/adi,adxl345.yaml | 2 + .../devicetree/bindings/iio/adc/adi,ad7173.yaml | 279 +++++++++++ .../devicetree/bindings/iio/adc/adi,ad7944.yaml | 213 +++++++++ .../iio/adc/allwinner,sun20i-d1-gpadc.yaml | 9 +- .../devicetree/bindings/iio/adc/st,stm32-adc.yaml | 4 + .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 4 + .../devicetree/bindings/iio/dac/adi,ad3552r.yaml | 2 +- .../devicetree/bindings/iio/dac/adi,ad9739a.yaml | 95 ++++ .../devicetree/bindings/iio/dac/adi,axi-dac.yaml | 62 +++ .../devicetree/bindings/iio/dac/st,stm32-dac.yaml | 4 + .../devicetree/bindings/iio/dac/ti,dac5571.yaml | 1 + .../bindings/iio/health/maxim,max30102.yaml | 12 +- .../bindings/iio/humidity/ti,hdc3020.yaml | 5 + .../bindings/iio/imu/invensense,icm42600.yaml | 2 + .../bindings/iio/imu/invensense,mpu6050.yaml | 17 +- .../bindings/iio/light/avago,apds9300.yaml | 20 +- .../bindings/iio/light/avago,apds9960.yaml | 44 -- .../bindings/iio/temperature/adi,ltc2983.yaml | 4 + .../devicetree/bindings/input/azoteq,iqs7222.yaml | 2 +- .../devicetree/bindings/input/elan,ekth6915.yaml | 19 +- .../devicetree/bindings/input/ilitek,ili2901.yaml | 66 +++ .../devicetree/bindings/input/qcom,pm8xxx-vib.yaml | 16 +- .../bindings/input/touchscreen/edt-ft5x06.yaml | 2 + .../bindings/input/twl4030-pwrbutton.txt | 21 - .../allwinner,sun7i-a20-sc-nmi.yaml | 8 +- .../mediatek,mt6577-sysirq.yaml | 2 +- .../interrupt-controller/renesas,irqc.yaml | 1 + .../bindings/interrupt-controller/riscv,aplic.yaml | 172 +++++++ .../interrupt-controller/riscv,imsics.yaml | 172 +++++++ .../interrupt-controller/st,stm32-exti.yaml | 17 +- .../devicetree/bindings/iommu/qcom,tbu.yaml | 69 +++ .../bindings/iommu/renesas,ipmmu-vmsa.yaml | 1 + .../devicetree/bindings/leds/leds-qcom-lpg.yaml | 8 +- .../devicetree/bindings/leds/nxp,pca963x.yaml | 140 ++++++ Documentation/devicetree/bindings/leds/pca963x.txt | 52 --- .../devicetree/bindings/mailbox/arm,mhuv3.yaml | 224 +++++++++ .../bindings/mailbox/qcom,apcs-kpss-global.yaml | 1 + .../devicetree/bindings/mailbox/qcom-ipcc.yaml | 1 + .../devicetree/bindings/media/amphion,vpu.yaml | 2 +- .../bindings/media/brcm,bcm2835-unicam.yaml | 127 +++++ .../bindings/media/cec/st,stm32-cec.yaml | 4 + .../bindings/media/i2c/galaxycore,gc0308.yaml | 2 +- .../bindings/media/i2c/galaxycore,gc2145.yaml | 2 +- .../devicetree/bindings/media/i2c/ov8856.yaml | 132 ------ .../devicetree/bindings/media/i2c/ovti,ov2680.yaml | 17 +- .../devicetree/bindings/media/i2c/ovti,ov8856.yaml | 132 ++++++ .../devicetree/bindings/media/i2c/sony,imx214.yaml | 2 +- .../devicetree/bindings/media/i2c/sony,imx290.yaml | 5 +- .../devicetree/bindings/media/i2c/sony,imx415.yaml | 2 +- .../devicetree/bindings/media/nxp,imx8-isi.yaml | 1 + .../devicetree/bindings/media/nxp,imx8-jpeg.yaml | 11 + .../bindings/media/qcom,sc8280xp-camss.yaml | 512 +++++++++++++++++++++ .../devicetree/bindings/media/st,stm32-dcmi.yaml | 4 + .../bindings/media/st,stm32mp25-video-codec.yaml | 4 + .../memory-controllers/samsung,s5pv210-dmc.yaml | 33 ++ .../memory-controllers/st,stm32-fmc2-ebi.yaml | 4 + .../devicetree/bindings/mfd/actions,atc260x.yaml | 6 +- .../bindings/mfd/allwinner,sun6i-a31-prcm.yaml | 14 +- .../bindings/mfd/aspeed,ast2x00-scu.yaml | 16 +- .../devicetree/bindings/mfd/brcm,cru.yaml | 8 +- .../devicetree/bindings/mfd/brcm,iproc-cdru.txt | 16 - .../devicetree/bindings/mfd/brcm,iproc-mhb.txt | 18 - .../devicetree/bindings/mfd/brcm,misc.yaml | 2 +- .../bindings/mfd/canaan,k210-sysctl.yaml | 6 +- .../devicetree/bindings/mfd/delta,tn48m-cpld.yaml | 4 +- Documentation/devicetree/bindings/mfd/iqs62x.yaml | 4 +- .../devicetree/bindings/mfd/kontron,sl28cpld.yaml | 10 +- Documentation/devicetree/bindings/mfd/lp873x.txt | 67 --- .../devicetree/bindings/mfd/max77650.yaml | 8 +- .../devicetree/bindings/mfd/maxim,max77686.yaml | 2 +- .../devicetree/bindings/mfd/maxim,max77693.yaml | 2 +- .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 4 + .../devicetree/bindings/mfd/qcom,tcsr.yaml | 1 + .../devicetree/bindings/mfd/qcom-pm8xxx.yaml | 1 + .../devicetree/bindings/mfd/richtek,rt4831.yaml | 4 +- .../devicetree/bindings/mfd/ricoh,rn5t618.yaml | 6 +- .../devicetree/bindings/mfd/rockchip,rk805.yaml | 2 +- .../devicetree/bindings/mfd/rockchip,rk808.yaml | 2 +- .../devicetree/bindings/mfd/rockchip,rk816.yaml | 274 +++++++++++ .../devicetree/bindings/mfd/rockchip,rk817.yaml | 2 +- .../devicetree/bindings/mfd/rockchip,rk818.yaml | 2 +- .../devicetree/bindings/mfd/rohm,bd71815-pmic.yaml | 2 +- .../devicetree/bindings/mfd/rohm,bd71828-pmic.yaml | 13 +- .../devicetree/bindings/mfd/rohm,bd71837-pmic.yaml | 2 +- .../devicetree/bindings/mfd/rohm,bd9571mwv.yaml | 2 +- .../devicetree/bindings/mfd/rohm,bd9576-pmic.yaml | 2 +- .../devicetree/bindings/mfd/samsung,s2mpa01.yaml | 2 +- .../devicetree/bindings/mfd/samsung,s2mps11.yaml | 12 +- .../devicetree/bindings/mfd/samsung,s5m8767.yaml | 4 +- .../devicetree/bindings/mfd/st,stm32-lptimer.yaml | 4 + .../devicetree/bindings/mfd/st,stm32-timers.yaml | 4 + .../devicetree/bindings/mfd/st,stmfx.yaml | 2 +- .../devicetree/bindings/mfd/st,stpmic1.yaml | 4 +- .../devicetree/bindings/mfd/stericsson,ab8500.yaml | 48 +- .../bindings/mfd/stericsson,db8500-prcmu.yaml | 40 +- Documentation/devicetree/bindings/mfd/syscon.yaml | 16 + .../devicetree/bindings/mfd/ti,lp8732.yaml | 112 +++++ .../devicetree/bindings/mfd/ti,tps65086.yaml | 4 +- .../devicetree/bindings/mfd/ti,tps6594.yaml | 1 + Documentation/devicetree/bindings/mfd/ti,twl.yaml | 72 ++- .../devicetree/bindings/mfd/x-powers,axp152.yaml | 2 + .../devicetree/bindings/mmc/arm,pl18x.yaml | 4 + .../devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 3 + .../devicetree/bindings/mmc/renesas,sdhi.yaml | 39 +- Documentation/devicetree/bindings/mtd/mtd.yaml | 4 +- .../devicetree/bindings/mtd/partitions/binman.yaml | 53 +++ .../bindings/mtd/partitions/partition.yaml | 72 +++ .../bindings/mtd/samsung,s5pv210-onenand.yaml | 65 +++ .../devicetree/bindings/net/airoha,en8811h.yaml | 56 +++ .../net/bluetooth/mediatek,mt7921s-bluetooth.yaml | 55 +++ .../bindings/net/broadcom-bluetooth.yaml | 33 +- .../devicetree/bindings/net/can/bosch,m_can.yaml | 4 + .../devicetree/bindings/net/fsl,fman-dtsec.yaml | 1 - .../devicetree/bindings/net/nxp,dwmac-imx.yaml | 4 + .../bindings/net/pse-pd/microchip,pd692x0.yaml | 176 +++++++ .../bindings/net/pse-pd/pse-controller.yaml | 101 +++- .../bindings/net/pse-pd/ti,tps23881.yaml | 113 +++++ .../devicetree/bindings/net/qcom,ethqos.yaml | 2 + .../devicetree/bindings/net/qcom,ipq4019-mdio.yaml | 2 + .../devicetree/bindings/net/renesas,etheravb.yaml | 12 +- .../devicetree/bindings/net/renesas,ethertsn.yaml | 33 +- .../devicetree/bindings/net/renesas,rzn1-gmac.yaml | 66 +++ .../devicetree/bindings/net/rockchip-dwmac.yaml | 4 +- Documentation/devicetree/bindings/net/sff,sfp.yaml | 12 +- .../devicetree/bindings/net/snps,dwmac.yaml | 20 +- .../bindings/net/starfive,jh7110-dwmac.yaml | 28 +- .../devicetree/bindings/net/stm32-dwmac.yaml | 11 + .../devicetree/bindings/net/ti,cpsw-switch.yaml | 1 - .../devicetree/bindings/net/ti,icssg-prueth.yaml | 35 +- .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 1 - .../devicetree/bindings/net/ti,k3-am654-cpts.yaml | 1 - .../bindings/net/wireless/brcm,bcm4329-fmac.yaml | 1 + .../bindings/net/wireless/qcom,ath10k.yaml | 6 + .../bindings/net/wireless/qcom,ath11k.yaml | 3 + .../devicetree/bindings/nvmem/qcom,qfprom.yaml | 4 + .../devicetree/bindings/nvmem/qcom,spmi-sdam.yaml | 2 +- .../opp/allwinner,sun50i-h6-operating-points.yaml | 87 ++-- .../devicetree/bindings/pci/amlogic,axg-pcie.yaml | 2 +- .../devicetree/bindings/pci/apple,pcie.yaml | 2 +- .../devicetree/bindings/pci/brcm,iproc-pcie.yaml | 2 +- .../devicetree/bindings/pci/brcm,stb-pcie.yaml | 2 +- .../bindings/pci/cdns,cdns-pcie-host.yaml | 3 - .../devicetree/bindings/pci/cdns-pcie-host.yaml | 2 +- .../devicetree/bindings/pci/faraday,ftpci100.yaml | 2 +- .../bindings/pci/fsl,layerscape-pcie-ep.yaml | 102 ++++ .../bindings/pci/fsl,layerscape-pcie.yaml | 167 +++++++ .../devicetree/bindings/pci/host-generic-pci.yaml | 2 +- .../devicetree/bindings/pci/intel,ixp4xx-pci.yaml | 2 +- .../bindings/pci/intel,keembay-pcie.yaml | 2 +- .../devicetree/bindings/pci/layerscape-pci.txt | 79 ---- .../devicetree/bindings/pci/loongson.yaml | 2 +- .../bindings/pci/mediatek,mt7621-pcie.yaml | 7 +- .../bindings/pci/mediatek-pcie-gen3.yaml | 2 +- .../bindings/pci/microchip,pcie-host.yaml | 5 +- .../devicetree/bindings/pci/qcom,pcie-common.yaml | 2 +- .../devicetree/bindings/pci/qcom,pcie-sm8350.yaml | 22 - .../devicetree/bindings/pci/qcom,pcie.yaml | 2 +- .../devicetree/bindings/pci/rcar-gen4-pci-ep.yaml | 4 +- .../bindings/pci/rcar-gen4-pci-host.yaml | 4 +- .../devicetree/bindings/pci/rcar-pci-host.yaml | 2 +- .../bindings/pci/renesas,pci-rcar-gen2.yaml | 2 +- .../bindings/pci/rockchip,rk3399-pcie.yaml | 2 +- .../devicetree/bindings/pci/snps,dw-pcie.yaml | 2 +- .../devicetree/bindings/pci/ti,am65-pci-host.yaml | 22 +- .../devicetree/bindings/pci/ti,j721e-pci-host.yaml | 5 + .../devicetree/bindings/pci/versatile.yaml | 2 +- .../devicetree/bindings/pci/xilinx-versal-cpm.yaml | 9 +- .../bindings/pci/xlnx,axi-pcie-host.yaml | 2 +- .../devicetree/bindings/pci/xlnx,nwl-pcie.yaml | 4 +- .../devicetree/bindings/pci/xlnx,xdma-host.yaml | 2 +- .../devicetree/bindings/phy/brcm,sata-phy.yaml | 8 +- .../bindings/phy/fsl,imx8mp-hdmi-phy.yaml | 62 +++ .../bindings/phy/mediatek,mt7988-xfi-tphy.yaml | 80 ++++ .../bindings/phy/phy-rockchip-usbdp.yaml | 148 ++++++ .../devicetree/bindings/phy/phy-stm32-usbphyc.yaml | 4 + .../devicetree/bindings/phy/qcom,edp-phy.yaml | 1 + .../bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 27 +- .../bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml | 3 + .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 2 + .../bindings/phy/qcom,snps-eusb2-repeater.yaml | 4 +- .../bindings/phy/qcom,usb-snps-femto-v2.yaml | 1 + .../bindings/phy/rockchip,pcie3-phy.yaml | 10 + .../devicetree/bindings/phy/samsung,ufs-phy.yaml | 1 + .../bindings/pinctrl/mediatek,mt7622-pinctrl.yaml | 21 +- .../bindings/pinctrl/qcom,pmic-gpio.yaml | 41 +- .../devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml | 1 + .../bindings/pinctrl/samsung,pinctrl.yaml | 21 + .../bindings/platform/acer,aspire1-ec.yaml | 60 +++ .../bindings/power/supply/maxim,max8903.yaml | 2 +- .../devicetree/bindings/pwm/atmel,at91sam-pwm.yaml | 3 + .../bindings/pwm/google,cros-ec-pwm.yaml | 1 - .../devicetree/bindings/pwm/marvell,pxa-pwm.yaml | 1 - .../bindings/pwm/mediatek,mt2712-pwm.yaml | 1 - .../devicetree/bindings/pwm/mediatek,pwm-disp.yaml | 2 +- .../devicetree/bindings/pwm/pwm-bcm2835.yaml | 1 - .../bindings/pwm/snps,dw-apb-timers-pwm2.yaml | 1 - .../regulator/allwinner,sun20i-d1-system-ldos.yaml | 37 ++ .../bindings/regulator/fixed-regulator.yaml | 7 + .../bindings/regulator/nxp,pca9450-regulator.yaml | 1 + .../regulator/qcom,usb-vbus-regulator.yaml | 1 + .../bindings/regulator/st,stm32-vrefbuf.yaml | 4 + .../devicetree/bindings/regulator/ti,tps62864.yaml | 2 +- .../devicetree/bindings/remoteproc/mtk,scp.yaml | 2 + .../bindings/remoteproc/qcom,msm8996-mss-pil.yaml | 1 - .../bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml | 6 +- .../bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 6 +- .../bindings/remoteproc/qcom,sdm845-adsp-pil.yaml | 6 +- .../bindings/remoteproc/qcom,smd-edge.yaml | 3 +- .../bindings/remoteproc/xlnx,zynqmp-r5fss.yaml | 279 ++++++++++- .../devicetree/bindings/riscv/starfive.yaml | 1 + .../devicetree/bindings/rng/microsoft,vmgenid.yaml | 49 ++ .../devicetree/bindings/rng/st,stm32-rng.yaml | 4 + .../bindings/rtc/alphascale,asm9260-rtc.txt | 19 - .../bindings/rtc/alphascale,asm9260-rtc.yaml | 50 ++ .../devicetree/bindings/rtc/armada-380-rtc.txt | 24 - .../devicetree/bindings/rtc/digicolor-rtc.txt | 17 - .../devicetree/bindings/rtc/fsl,stmp3xxx-rtc.yaml | 51 ++ .../bindings/rtc/google,goldfish-rtc.txt | 17 - .../devicetree/bindings/rtc/lpc32xx-rtc.txt | 15 - .../bindings/rtc/marvell,armada-380-rtc.yaml | 51 ++ .../devicetree/bindings/rtc/marvell,pxa-rtc.yaml | 40 ++ .../devicetree/bindings/rtc/maxim,ds1742.txt | 12 - .../devicetree/bindings/rtc/nxp,lpc1788-rtc.txt | 21 - .../devicetree/bindings/rtc/nxp,lpc1788-rtc.yaml | 58 +++ .../devicetree/bindings/rtc/orion-rtc.txt | 18 - Documentation/devicetree/bindings/rtc/pxa-rtc.txt | 14 - .../devicetree/bindings/rtc/rtc-aspeed.txt | 22 - .../devicetree/bindings/rtc/spear-rtc.txt | 15 - .../devicetree/bindings/rtc/stmp3xxx-rtc.txt | 21 - .../devicetree/bindings/rtc/trivial-rtc.yaml | 21 + Documentation/devicetree/bindings/rtc/twl-rtc.txt | 11 - .../devicetree/bindings/rtc/via,vt8500-rtc.txt | 15 - .../bindings/serial/actions,owl-uart.txt | 16 - .../bindings/serial/actions,owl-uart.yaml | 48 ++ .../bindings/serial/amlogic,meson-uart.yaml | 4 +- .../bindings/serial/brcm,bcm2835-aux-uart.txt | 18 - .../bindings/serial/brcm,bcm2835-aux-uart.yaml | 46 ++ .../devicetree/bindings/serial/cdns,uart.yaml | 3 + .../bindings/serial/fsl,s32-linflexuart.yaml | 4 +- .../devicetree/bindings/serial/renesas,scif.yaml | 1 + .../devicetree/bindings/serial/st,stm32-uart.yaml | 4 + .../bindings/soc/qcom/qcom,pmic-glink.yaml | 14 - .../devicetree/bindings/soc/qcom/qcom,wcnss.yaml | 4 +- .../soc/renesas/renesas,r9a09g057-sys.yaml | 51 ++ .../devicetree/bindings/soc/renesas/renesas.yaml | 8 + .../soc/samsung/samsung,exynos-sysreg.yaml | 2 + .../bindings/soc/tegra/nvidia,tegra20-pmc.yaml | 6 +- .../devicetree/bindings/sound/davinci-mcbsp.txt | 50 -- .../devicetree/bindings/sound/davinci-mcbsp.yaml | 113 +++++ .../devicetree/bindings/sound/fsl,audmix.txt | 50 -- .../devicetree/bindings/sound/fsl,audmix.yaml | 83 ++++ .../devicetree/bindings/sound/fsl,esai.txt | 68 --- .../devicetree/bindings/sound/fsl,esai.yaml | 118 +++++ .../devicetree/bindings/sound/fsl,imx-asrc.yaml | 14 + .../bindings/sound/fsl,imx-audio-spdif.yaml | 66 +++ .../devicetree/bindings/sound/fsl,sai.yaml | 6 +- .../devicetree/bindings/sound/fsl,spdif.yaml | 35 +- .../devicetree/bindings/sound/fsl,ssi.txt | 87 ---- .../devicetree/bindings/sound/fsl,ssi.yaml | 194 ++++++++ .../devicetree/bindings/sound/fsl-asoc-card.txt | 117 ----- .../devicetree/bindings/sound/fsl-asoc-card.yaml | 197 ++++++++ .../devicetree/bindings/sound/imx-audio-spdif.txt | 36 -- .../bindings/sound/mediatek,mt2701-wm8960.yaml | 54 +++ .../devicetree/bindings/sound/mt2701-wm8960.txt | 24 - .../sound/mt8186-mt6366-da7219-max98357.yaml | 131 +++++- .../sound/mt8186-mt6366-rt1019-rt5682s.yaml | 120 ++++- .../sound/mt8192-mt6359-rt1015-rt5682.yaml | 139 +++++- .../devicetree/bindings/sound/mt8195-mt6359.yaml | 134 ++++++ .../devicetree/bindings/sound/nuvoton,nau8325.yaml | 80 ++++ .../devicetree/bindings/sound/nuvoton,nau8821.yaml | 7 + .../bindings/sound/nvidia,tegra20-ac97.txt | 36 -- .../bindings/sound/nvidia,tegra20-ac97.yaml | 82 ++++ .../bindings/sound/nvidia,tegra20-das.txt | 12 - .../bindings/sound/nvidia,tegra20-das.yaml | 36 ++ .../bindings/sound/nvidia,tegra30-i2s.txt | 27 -- .../bindings/sound/nvidia,tegra30-i2s.yaml | 67 +++ .../devicetree/bindings/sound/qcom,sm8250.yaml | 2 + .../devicetree/bindings/sound/renesas,rsnd.yaml | 5 +- .../bindings/sound/rockchip,rk3308-codec.yaml | 98 ++++ .../devicetree/bindings/sound/st,stm32-i2s.yaml | 4 + .../devicetree/bindings/sound/st,stm32-sai.yaml | 6 +- .../bindings/sound/st,stm32-spdifrx.yaml | 4 + .../devicetree/bindings/sound/ti,pcm1681.txt | 15 - .../devicetree/bindings/sound/ti,pcm1681.yaml | 43 ++ .../devicetree/bindings/sound/ti,pcm6240.yaml | 177 +++++++ .../devicetree/bindings/sound/wlf,wm8776.yaml | 41 ++ .../devicetree/bindings/sound/wlf,wm8974.txt | 15 - .../devicetree/bindings/sound/wlf,wm8974.yaml | 41 ++ Documentation/devicetree/bindings/sound/wm8776.txt | 18 - .../devicetree/bindings/sound/xmos,xvf3500.yaml | 63 +++ .../bindings/spi/airoha,en7581-snand.yaml | 65 +++ .../devicetree/bindings/spi/cdns,qspi-nor.yaml | 8 +- .../bindings/spi/marvell,armada-3700-spi.yaml | 55 +++ .../devicetree/bindings/spi/renesas,sh-msiof.yaml | 1 + .../devicetree/bindings/spi/spi-armada-3700.txt | 25 - .../devicetree/bindings/spi/st,stm32-qspi.yaml | 4 + .../devicetree/bindings/spi/st,stm32-spi.yaml | 4 + Documentation/devicetree/bindings/spi/ti,qspi.yaml | 96 ++++ Documentation/devicetree/bindings/spi/ti_qspi.txt | 53 --- .../spmi/hisilicon,hisi-spmi-controller.yaml | 17 +- .../bindings/spmi/qcom,spmi-pmic-arb.yaml | 1 + .../bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml | 136 ++++++ .../bindings/thermal/amlogic,thermal.yaml | 12 +- .../bindings/thermal/mediatek,lvts-thermal.yaml | 6 + .../devicetree/bindings/thermal/qcom-lmh.yaml | 12 +- .../bindings/thermal/st,stih407-thermal.yaml | 58 +++ .../devicetree/bindings/thermal/st-thermal.txt | 32 -- .../devicetree/bindings/thermal/thermal-zones.yaml | 5 +- .../devicetree/bindings/timer/renesas,cmt.yaml | 2 + .../devicetree/bindings/timer/renesas,ostm.yaml | 2 + .../devicetree/bindings/timer/renesas,tmu.yaml | 1 + .../devicetree/bindings/tpm/ibm,vtpm.yaml | 4 +- .../devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml | 1 + .../devicetree/bindings/trivial-devices.yaml | 6 + .../bindings/ufs/samsung,exynos-ufs.yaml | 38 +- .../bindings/usb/chipidea,usb2-common.yaml | 200 ++++++++ .../devicetree/bindings/usb/chipidea,usb2-imx.yaml | 287 ++++++++++++ .../devicetree/bindings/usb/ci-hdrc-usb2.yaml | 360 +-------------- .../devicetree/bindings/usb/cypress,hx3.yaml | 1 - Documentation/devicetree/bindings/usb/dwc2.yaml | 5 + .../devicetree/bindings/usb/fsl,usbmisc.yaml | 1 + .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 1 + .../devicetree/bindings/usb/microchip,usb2514.yaml | 63 +++ .../devicetree/bindings/usb/qcom,dwc3.yaml | 41 +- .../devicetree/bindings/usb/qcom,pmic-typec.yaml | 35 +- .../devicetree/bindings/usb/renesas,usbhs.yaml | 6 +- .../bindings/usb/samsung,exynos-dwc3.yaml | 18 + .../devicetree/bindings/usb/snps,dwc3.yaml | 13 +- Documentation/devicetree/bindings/usb/usb-uhci.txt | 18 - .../devicetree/bindings/usb/usb-uhci.yaml | 75 +++ .../devicetree/bindings/vendor-prefixes.yaml | 10 + .../bindings/watchdog/aspeed,ast2400-wdt.yaml | 142 ++++++ .../devicetree/bindings/watchdog/aspeed-wdt.txt | 73 --- .../devicetree/bindings/watchdog/twl4030-wdt.txt | 10 - 497 files changed, 12258 insertions(+), 3372 deletions(-) create mode 100644 Documentation/devicetree/bindings/access-controllers/access-controllers.yaml delete mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt delete mode 100644 Documentation/devicetree/bindings/arm/apm/scu.txt delete mode 100644 Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt delete mode 100644 Documentation/devicetree/bindings/ata/ahci-da850.txt create mode 100644 Documentation/devicetree/bindings/ata/fsl,imx-pata.yaml delete mode 100644 Documentation/devicetree/bindings/ata/imx-pata.txt create mode 100644 Documentation/devicetree/bindings/ata/ti,da850-ahci.yaml create mode 100644 Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml create mode 100644 Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml create mode 100644 Documentation/devicetree/bindings/clock/nxp,imx95-blk-ctl.yaml create mode 100644 Documentation/devicetree/bindings/clock/nxp,imx95-display-master-csr.yaml delete mode 100644 Documentation/devicetree/bindings/clock/qcom,hfpll.txt create mode 100644 Documentation/devicetree/bindings/clock/qcom,hfpll.yaml create mode 100644 Documentation/devicetree/bindings/clock/samsung,s3c6400-clock.yaml delete mode 100644 Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt create mode 100644 Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-aes.yaml create mode 100644 Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-hash.yaml delete mode 100644 Documentation/devicetree/bindings/crypto/omap-sham.txt create mode 100644 Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml create mode 100644 Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml delete mode 100644 Documentation/devicetree/bindings/display/atmel,lcdc.txt create mode 100644 Documentation/devicetree/bindings/display/atmel,lcdc.yaml create mode 100644 Documentation/devicetree/bindings/display/bridge/microchip,sam9x75-lvds.yaml delete mode 100644 Documentation/devicetree/bindings/display/exynos/exynos_dp.txt create mode 100644 Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml create mode 100644 Documentation/devicetree/bindings/display/panel/panel-common-dual.yaml create mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm69380.yaml create mode 100644 Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml delete mode 100644 Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,fpga-selectmap.yaml delete mode 100644 Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt create mode 100644 Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml delete mode 100644 Documentation/devicetree/bindings/hwmon/adc128d818.txt delete mode 100644 Documentation/devicetree/bindings/hwmon/as370.txt create mode 100644 Documentation/devicetree/bindings/hwmon/ibm,opal-sensor.yaml delete mode 100644 Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt delete mode 100644 Documentation/devicetree/bindings/hwmon/ibmpowernv.txt delete mode 100644 Documentation/devicetree/bindings/hwmon/lm87.txt delete mode 100644 Documentation/devicetree/bindings/hwmon/max6650.txt create mode 100644 Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml delete mode 100644 Documentation/devicetree/bindings/hwmon/pwm-fan.txt create mode 100644 Documentation/devicetree/bindings/hwmon/st,stts751.yaml delete mode 100644 Documentation/devicetree/bindings/hwmon/stts751.txt create mode 100644 Documentation/devicetree/bindings/hwmon/syna,as370.yaml create mode 100644 Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml create mode 100644 Documentation/devicetree/bindings/hwmon/ti,lm87.yaml delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-pnx.txt create mode 100644 Documentation/devicetree/bindings/i2c/nxp,pnx-i2c.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7944.yaml create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad9739a.yaml create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml delete mode 100644 Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml create mode 100644 Documentation/devicetree/bindings/input/ilitek,ili2901.yaml delete mode 100644 Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml create mode 100644 Documentation/devicetree/bindings/iommu/qcom,tbu.yaml create mode 100644 Documentation/devicetree/bindings/leds/nxp,pca963x.yaml delete mode 100644 Documentation/devicetree/bindings/leds/pca963x.txt create mode 100644 Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml create mode 100644 Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov8856.yaml create mode 100644 Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml create mode 100644 Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt delete mode 100644 Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt delete mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk816.yaml create mode 100644 Documentation/devicetree/bindings/mfd/ti,lp8732.yaml create mode 100644 Documentation/devicetree/bindings/mtd/partitions/binman.yaml create mode 100644 Documentation/devicetree/bindings/mtd/samsung,s5pv210-onenand.yaml create mode 100644 Documentation/devicetree/bindings/net/airoha,en8811h.yaml create mode 100644 Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml create mode 100644 Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml create mode 100644 Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml create mode 100644 Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml create mode 100644 Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml create mode 100644 Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml delete mode 100644 Documentation/devicetree/bindings/pci/layerscape-pci.txt create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8mp-hdmi-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml create mode 100644 Documentation/devicetree/bindings/platform/acer,aspire1-ec.yaml create mode 100644 Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml create mode 100644 Documentation/devicetree/bindings/rng/microsoft,vmgenid.yaml delete mode 100644 Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt create mode 100644 Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.yaml delete mode 100644 Documentation/devicetree/bindings/rtc/armada-380-rtc.txt delete mode 100644 Documentation/devicetree/bindings/rtc/digicolor-rtc.txt create mode 100644 Documentation/devicetree/bindings/rtc/fsl,stmp3xxx-rtc.yaml delete mode 100644 Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt delete mode 100644 Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt create mode 100644 Documentation/devicetree/bindings/rtc/marvell,armada-380-rtc.yaml create mode 100644 Documentation/devicetree/bindings/rtc/marvell,pxa-rtc.yaml delete mode 100644 Documentation/devicetree/bindings/rtc/maxim,ds1742.txt delete mode 100644 Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt create mode 100644 Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.yaml delete mode 100644 Documentation/devicetree/bindings/rtc/orion-rtc.txt delete mode 100644 Documentation/devicetree/bindings/rtc/pxa-rtc.txt delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-aspeed.txt delete mode 100644 Documentation/devicetree/bindings/rtc/spear-rtc.txt delete mode 100644 Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt delete mode 100644 Documentation/devicetree/bindings/rtc/twl-rtc.txt delete mode 100644 Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt delete mode 100644 Documentation/devicetree/bindings/serial/actions,owl-uart.txt create mode 100644 Documentation/devicetree/bindings/serial/actions,owl-uart.yaml delete mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt create mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml create mode 100644 Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml delete mode 100644 Documentation/devicetree/bindings/sound/davinci-mcbsp.txt create mode 100644 Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml delete mode 100644 Documentation/devicetree/bindings/sound/fsl,audmix.txt create mode 100644 Documentation/devicetree/bindings/sound/fsl,audmix.yaml delete mode 100644 Documentation/devicetree/bindings/sound/fsl,esai.txt create mode 100644 Documentation/devicetree/bindings/sound/fsl,esai.yaml create mode 100644 Documentation/devicetree/bindings/sound/fsl,imx-audio-spdif.yaml delete mode 100644 Documentation/devicetree/bindings/sound/fsl,ssi.txt create mode 100644 Documentation/devicetree/bindings/sound/fsl,ssi.yaml delete mode 100644 Documentation/devicetree/bindings/sound/fsl-asoc-card.txt create mode 100644 Documentation/devicetree/bindings/sound/fsl-asoc-card.yaml delete mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.txt create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt2701-wm8960.yaml delete mode 100644 Documentation/devicetree/bindings/sound/mt2701-wm8960.txt create mode 100644 Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml delete mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.yaml delete mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-das.txt create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-das.yaml delete mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.yaml create mode 100644 Documentation/devicetree/bindings/sound/rockchip,rk3308-codec.yaml delete mode 100644 Documentation/devicetree/bindings/sound/ti,pcm1681.txt create mode 100644 Documentation/devicetree/bindings/sound/ti,pcm1681.yaml create mode 100644 Documentation/devicetree/bindings/sound/ti,pcm6240.yaml create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8776.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8974.txt create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8974.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8776.txt create mode 100644 Documentation/devicetree/bindings/sound/xmos,xvf3500.yaml create mode 100644 Documentation/devicetree/bindings/spi/airoha,en7581-snand.yaml create mode 100644 Documentation/devicetree/bindings/spi/marvell,armada-3700-spi.yaml delete mode 100644 Documentation/devicetree/bindings/spi/spi-armada-3700.txt create mode 100644 Documentation/devicetree/bindings/spi/ti,qspi.yaml delete mode 100644 Documentation/devicetree/bindings/spi/ti_qspi.txt create mode 100644 Documentation/devicetree/bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml create mode 100644 Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml delete mode 100644 Documentation/devicetree/bindings/thermal/st-thermal.txt create mode 100644 Documentation/devicetree/bindings/usb/chipidea,usb2-common.yaml create mode 100644 Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml create mode 100644 Documentation/devicetree/bindings/usb/microchip,usb2514.yaml delete mode 100644 Documentation/devicetree/bindings/usb/usb-uhci.txt create mode 100644 Documentation/devicetree/bindings/usb/usb-uhci.yaml create mode 100644 Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml delete mode 100644 Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt delete mode 100644 Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt (limited to 'Documentation/devicetree/bindings') diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 5e08e3a6a9..bf7d64632e 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -25,23 +25,25 @@ quiet_cmd_extract_ex = DTEX $@ $(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE $(call if_changed,extract_ex) -find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \ +find_all_cmd = find $(src) \( -name '*.yaml' ! \ -name 'processed-schema*' \) find_cmd = $(find_all_cmd) | \ sed 's|^$(srctree)/||' | \ grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | \ sed 's|^|$(srctree)/|' -CHK_DT_DOCS := $(shell $(find_cmd)) +CHK_DT_EXAMPLES := $(patsubst $(srctree)/%.yaml,%.example.dtb, $(shell $(find_cmd))) quiet_cmd_yamllint = LINT $(src) cmd_yamllint = ($(find_cmd) | \ xargs -n200 -P$$(nproc) \ - $(DT_SCHEMA_LINT) -f parsable -c $(srctree)/$(src)/.yamllint >&2) || true + $(DT_SCHEMA_LINT) -f parsable -c $(src)/.yamllint >&2) \ + && touch $@ || true -quiet_cmd_chk_bindings = CHKDT $@ +quiet_cmd_chk_bindings = CHKDT $(src) cmd_chk_bindings = ($(find_cmd) | \ - xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(srctree)/$(src)) || true + xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(src)) \ + && touch $@ || true quiet_cmd_mk_schema = SCHEMA $@ cmd_mk_schema = f=$$(mktemp) ; \ @@ -49,12 +51,6 @@ quiet_cmd_mk_schema = SCHEMA $@ $(DT_MK_SCHEMA) -j $(DT_MK_SCHEMA_FLAGS) @$$f > $@ ; \ rm -f $$f -define rule_chkdt - $(if $(DT_SCHEMA_LINT),$(call cmd,yamllint),) - $(call cmd,chk_bindings) - $(call cmd,mk_schema) -endef - DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_all_cmd))) override DTC_FLAGS := \ @@ -64,12 +60,19 @@ override DTC_FLAGS := \ -Wno-unique_unit_address \ -Wunique_unit_address_if_enabled -$(obj)/processed-schema.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE - $(call if_changed_rule,chkdt) +$(obj)/processed-schema.json: $(DT_DOCS) check_dtschema_version FORCE + $(call if_changed,mk_schema) + +targets += .dt-binding.checked .yamllint.checked +$(obj)/.yamllint.checked: $(DT_DOCS) $(src)/.yamllint FORCE + $(if $(DT_SCHEMA_LINT),$(call if_changed,yamllint),) + +$(obj)/.dt-binding.checked: $(DT_DOCS) FORCE + $(call if_changed,chk_bindings) always-y += processed-schema.json -always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dts, $(CHK_DT_DOCS)) -always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dtb, $(CHK_DT_DOCS)) +targets += $(patsubst $(obj)/%,%, $(CHK_DT_EXAMPLES)) +targets += $(patsubst $(obj)/%.dtb,%.dts, $(CHK_DT_EXAMPLES)) # Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of # build artifacts here before they are processed by scripts/Makefile.clean @@ -78,3 +81,6 @@ clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \ dt_compatible_check: $(obj)/processed-schema.json $(Q)$(srctree)/scripts/dtc/dt-extract-compatibles $(srctree) | xargs dt-check-compatible -v -s $< + +PHONY += dt_binding_check +dt_binding_check: $(obj)/.dt-binding.checked $(obj)/.yamllint.checked $(CHK_DT_EXAMPLES) diff --git a/Documentation/devicetree/bindings/access-controllers/access-controllers.yaml b/Documentation/devicetree/bindings/access-controllers/access-controllers.yaml new file mode 100644 index 0000000000..99e2865f0e --- /dev/null +++ b/Documentation/devicetree/bindings/access-controllers/access-controllers.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/access-controllers/access-controllers.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Domain Access Controllers + +maintainers: + - Oleksii Moisieiev + +description: |+ + Common access controllers properties + + Access controllers are in charge of stating which of the hardware blocks under + their responsibility (their domain) can be accesssed by which compartment. A + compartment can be a cluster of CPUs (or coprocessors), a range of addresses + or a group of hardware blocks. An access controller's domain is the set of + resources covered by the access controller. + + This device tree binding can be used to bind devices to their access + controller provided by access-controllers property. In this case, the device + is a consumer and the access controller is the provider. + + An access controller can be represented by any node in the device tree and + can provide one or more configuration parameters, needed to control parameters + of the consumer device. A consumer node can refer to the provider by phandle + and a set of phandle arguments, specified by '#access-controller-cells' + property in the access controller node. + + Access controllers are typically used to set/read the permissions of a + hardware block and grant access to it. Any of which depends on the access + controller. The capabilities of each access controller are defined by the + binding of the access controller device. + + Each node can be a consumer for the several access controllers. + +# always select the core schema +select: true + +properties: + "#access-controller-cells": + description: + Number of cells in an access-controllers specifier; + Can be any value as specified by device tree binding documentation + of a particular provider. The node is an access controller. + + access-controller-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: + A list of access-controllers names, sorted in the same order as + access-controllers entries. Consumer drivers will use + access-controller-names to match with existing access-controllers entries. + + access-controllers: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + A list of access controller specifiers, as defined by the + bindings of the access-controllers provider. + +additionalProperties: true + +examples: + - | + clock_controller: access-controllers@50000 { + reg = <0x50000 0x400>; + #access-controller-cells = <2>; + }; + + bus_controller: bus@60000 { + reg = <0x60000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + #access-controller-cells = <3>; + + uart4: serial@60100 { + reg = <0x60100 0x400>; + clocks = <&clk_serial>; + access-controllers = <&clock_controller 1 2>, + <&bus_controller 1 3 5>; + access-controller-names = "clock", "bus"; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt deleted file mode 100644 index 77ca635765..0000000000 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt +++ /dev/null @@ -1,12 +0,0 @@ -Altera SOCFPGA SDRAM Controller - -Required properties: -- compatible : Should contain "altr,sdr-ctl" and "syscon". - syscon is required by the Altera SOCFPGA SDRAM EDAC. -- reg : Should contain 1 register range (address and length) - -Example: - sdr: sdr@ffc25000 { - compatible = "altr,sdr-ctl", "syscon"; - reg = <0xffc25000 0x1000>; - }; diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 949537cea6..a374b98080 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -157,6 +157,7 @@ properties: items: - enum: - bananapi,bpi-cm4io + - mntre,reform2-cm4 - const: bananapi,bpi-cm4 - const: amlogic,a311d - const: amlogic,g12b @@ -201,6 +202,18 @@ properties: - amlogic,ad402 - const: amlogic,a1 + - description: Boards with the Amlogic A4 A113L2 SoC + items: + - enum: + - amlogic,ba400 + - const: amlogic,a4 + + - description: Boards with the Amlogic A5 A113X2 SoC + items: + - enum: + - amlogic,av400 + - const: amlogic,a5 + - description: Boards with the Amlogic C3 C302X/C308L SoC items: - enum: diff --git a/Documentation/devicetree/bindings/arm/apm/scu.txt b/Documentation/devicetree/bindings/arm/apm/scu.txt deleted file mode 100644 index b45be06625..0000000000 --- a/Documentation/devicetree/bindings/arm/apm/scu.txt +++ /dev/null @@ -1,17 +0,0 @@ -APM X-GENE SoC series SCU Registers - -This system clock unit contain various register that control block resets, -clock enable/disables, clock divisors and other deepsleep registers. - -Properties: - - compatible : should contain two values. First value must be: - - "apm,xgene-scu" - second value must be always "syscon". - - - reg : offset and length of the register set. - -Example : - scu: system-clk-controller@17000000 { - compatible = "apm,xgene-scu","syscon"; - reg = <0x0 0x17000000 0x0 0x400>; - }; diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml index 749ee54a3f..95113df178 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -35,7 +35,10 @@ properties: - ampere,mtjade-bmc - aspeed,ast2500-evb - asrock,e3c246d4i-bmc + - asrock,e3c256d4i-bmc - asrock,romed8hm3-bmc + - asrock,spc621d8hm3-bmc + - asrock,x570d4u-bmc - bytedance,g220a-bmc - facebook,cmm-bmc - facebook,minipack-bmc @@ -74,15 +77,18 @@ properties: - ampere,mtmitchell-bmc - aspeed,ast2600-evb - aspeed,ast2600-evb-a1 + - asus,x4tf-bmc - facebook,bletchley-bmc - facebook,cloudripper-bmc - facebook,elbert-bmc - facebook,fuji-bmc - facebook,greatlakes-bmc + - facebook,harma-bmc - facebook,minerva-cmc - facebook,yosemite4-bmc - ibm,everest-bmc - ibm,rainier-bmc + - ibm,system1-bmc - ibm,tacoma-bmc - inventec,starscream-bmc - inventec,transformer-bmc diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml index 4cc4e67546..d925e7a3b5 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -53,6 +53,7 @@ properties: - description: BCM4709 based boards items: - enum: + - asus,rt-ac3200 - asus,rt-ac87u - buffalo,wxr-1900dhp - linksys,ea9200 @@ -67,6 +68,7 @@ properties: items: - enum: - asus,rt-ac3100 + - asus,rt-ac5300 - asus,rt-ac88u - dlink,dir-885l - dlink,dir-890l diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index 39e3c248f5..1f84407a73 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -46,6 +46,30 @@ properties: - compatible - "#clock-cells" + gpio: + type: object + additionalProperties: false + + properties: + compatible: + const: raspberrypi,firmware-gpio + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: + The first cell is the pin number, and the second cell is used to + specify the gpio polarity (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW). + + gpio-line-names: + minItems: 8 + + required: + - compatible + - gpio-controller + - "#gpio-cells" + reset: type: object additionalProperties: false @@ -96,6 +120,12 @@ examples: #clock-cells = <1>; }; + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + reset: reset { compatible = "raspberrypi,firmware-reset"; #reset-cells = <1>; diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 0027201e19..6d185d09cb 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -813,6 +813,14 @@ properties: - const: tq,imx6ull-tqma6ull2l # MCIMX6Y2, LGA SoM variant - const: fsl,imx6ull + - description: Seeed Stuido i.MX6ULL SoM on dev boards + items: + - enum: + - seeed,imx6ull-seeed-npi-emmc + - seeed,imx6ull-seeed-npi-nand + - const: seeed,imx6ull-seeed-npi + - const: fsl,imx6ull + - description: i.MX6ULZ based Boards items: - enum: @@ -1050,6 +1058,7 @@ properties: - enum: - beacon,imx8mp-beacon-kit # i.MX8MP Beacon Development Kit - dmo,imx8mp-data-modul-edm-sbc # i.MX8MP eDM SBC + - emcraft,imx8mp-navqp # i.MX8MP Emcraft Systems NavQ+ Kit - fsl,imx8mp-evk # i.MX8MP EVK Board - gateworks,imx8mp-gw71xx-2x # i.MX8MP Gateworks Board - gateworks,imx8mp-gw72xx-2x # i.MX8MP Gateworks Board @@ -1218,7 +1227,6 @@ properties: - enum: - einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board - fsl,imx8qxp-mek # i.MX8QXP MEK Board - - toradex,colibri-imx8x # Colibri iMX8X Modules - const: fsl,imx8qxp - description: i.MX8DXL based Boards @@ -1227,7 +1235,7 @@ properties: - fsl,imx8dxl-evk # i.MX8DXL EVK Board - const: fsl,imx8dxl - - description: i.MX8QXP Boards with Toradex Colibri iMX8X Modules + - description: i.MX8QXP/i.MX8DX Boards with Toradex Colibri iMX8X Modules items: - enum: - toradex,colibri-imx8x-aster # Colibri iMX8X Module on Aster Board @@ -1235,7 +1243,9 @@ properties: - toradex,colibri-imx8x-iris # Colibri iMX8X Module on Iris Board - toradex,colibri-imx8x-iris-v2 # Colibri iMX8X Module on Iris Board V2 - const: toradex,colibri-imx8x - - const: fsl,imx8qxp + - enum: + - fsl,imx8qxp + - fsl,imx8dx - description: TQMa8Xx is a series of SOM featuring NXP i.MX8X system-on-chip @@ -1536,6 +1546,12 @@ properties: - nxp,s32g274a-rdb2 - const: nxp,s32g2 + - description: S32G3 based Boards + items: + - enum: + - nxp,s32g399a-rdb3 + - const: nxp,s32g3 + - description: S32V234 based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml index c24ad0968f..7f06b10802 100644 --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml @@ -61,10 +61,6 @@ properties: mboxes: minItems: 2 - ti,system-reboot-controller: - description: Determines If system reboot can be triggered by SoC reboot - type: boolean - ti,host-id: $ref: /schemas/types.yaml#/definitions/uint32 description: | @@ -94,7 +90,6 @@ examples: - | pmmc: system-controller@2921800 { compatible = "ti,k2g-sci"; - ti,system-reboot-controller; mbox-names = "rx", "tx"; mboxes = <&msgmgr 5 2>, <&msgmgr 0 0>; diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt deleted file mode 100644 index 29fa93dad5..0000000000 --- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt +++ /dev/null @@ -1,32 +0,0 @@ -Power management ----------------- - -For power management (particularly DVFS and AVS), the North Bridge -Power Management component is needed: - -Required properties: -- compatible : should contain "marvell,armada-3700-nb-pm", "syscon"; -- reg : the register start and length for the North Bridge - Power Management - -Example: - -nb_pm: syscon@14000 { - compatible = "marvell,armada-3700-nb-pm", "syscon"; - reg = <0x14000 0x60>; -} - -AVS ---- - -For AVS an other component is needed: - -Required properties: -- compatible : should contain "marvell,armada-3700-avs", "syscon"; -- reg : the register start and length for the AVS - -Example: -avs: avs@11500 { - compatible = "marvell,armada-3700-avs", "syscon"; - reg = <0x11500 0x40>; -} diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml index ea3c5db6b5..76163abed6 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml @@ -66,13 +66,11 @@ properties: - const: apb_pclk in-ports: - type: object description: | Input connections from TPDM to TPDA $ref: /schemas/graph.yaml#/properties/ports out-ports: - type: object description: | Output connections from the TPDA to legacy CoreSight trace bus. $ref: /schemas/graph.yaml#/properties/ports @@ -97,33 +95,31 @@ examples: # minimum tpda definition. - | tpda@6004000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x6004000 0x1000>; + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x6004000 0x1000>; - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; - in-ports { - #address-cells = <1>; - #size-cells = <0>; + in-ports { + #address-cells = <1>; + #size-cells = <0>; port@0 { reg = <0>; tpda_qdss_0_in_tpdm_dcc: endpoint { - remote-endpoint = - <&tpdm_dcc_out_tpda_qdss_0>; - }; + remote-endpoint = <&tpdm_dcc_out_tpda_qdss_0>; + }; }; }; - out-ports { - port { - tpda_qdss_out_funnel_in0: endpoint { - remote-endpoint = - <&funnel_in0_in_tpda_qdss>; - }; + out-ports { + port { + tpda_qdss_out_funnel_in0: endpoint { + remote-endpoint = <&funnel_in0_in_tpda_qdss>; }; - }; + }; + }; }; ... diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 66beaac60e..ae885414b1 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -137,6 +137,7 @@ properties: - microsoft,dempsey - microsoft,makepeace - microsoft,moneypenny + - motorola,falcon - samsung,s3ve3g - const: qcom,msm8226 @@ -184,13 +185,16 @@ properties: - oneplus,bacon - samsung,klte - sony,xperia-castor + - sony,xperia-leo - const: qcom,msm8974pro - const: qcom,msm8974 - items: - - const: qcom,msm8916-mtp - - const: qcom,msm8916-mtp/1 - - const: qcom,msm8916 + - enum: + - samsung,kltechn + - const: samsung,klte + - const: qcom,msm8974pro + - const: qcom,msm8974 - items: - enum: @@ -200,6 +204,8 @@ properties: - gplus,fl8005a - huawei,g7 - longcheer,l8910 + - longcheer,l8150 + - qcom,msm8916-mtp - samsung,a3u-eur - samsung,a5u-eur - samsung,e5 @@ -220,11 +226,6 @@ properties: - yiming,uz801-v3 - const: qcom,msm8916 - - items: - - const: longcheer,l8150 - - const: qcom,msm8916-v1-qrd/9-v1 - - const: qcom,msm8916 - - items: - enum: - motorola,potter @@ -1003,6 +1004,7 @@ properties: - qcom,sm8550-hdk - qcom,sm8550-mtp - qcom,sm8550-qrd + - sony,pdx234 - const: qcom,sm8550 - items: diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index fcf7316ecd..e04c213a0d 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -49,6 +49,11 @@ properties: - anbernic,rg-arc-s - const: rockchip,rk3566 + - description: ArmSoM Sige7 board + items: + - const: armsom,sige7 + - const: rockchip,rk3588 + - description: Asus Tinker board items: - const: asus,rk3288-tinker @@ -198,6 +203,13 @@ properties: - const: firefly,rk3568-roc-pc - const: rockchip,rk3568 + - description: Forlinx FET3588-C SoM + items: + - enum: + - forlinx,ok3588-c + - const: forlinx,fet3588-c + - const: rockchip,rk3588 + - description: FriendlyElec NanoPi R2 series boards items: - enum: @@ -236,6 +248,11 @@ properties: - const: friendlyarm,nanopc-t6 - const: rockchip,rk3588 + - description: GameForce Chi + items: + - const: gameforce,chi + - const: rockchip,rk3326 + - description: GeekBuying GeekBox items: - const: geekbuying,geekbox @@ -631,7 +648,7 @@ properties: - const: phytec,rk3288-phycore-som - const: rockchip,rk3288 - - description: Pine64 PinebookPro + - description: Pine64 Pinebook Pro items: - const: pine64,pinebook-pro - const: rockchip,rk3399 @@ -644,7 +661,7 @@ properties: - const: pine64,pinenote - const: rockchip,rk3566 - - description: Pine64 PinePhonePro + - description: Pine64 PinePhone Pro items: - const: pine64,pinephone-pro - const: rockchip,rk3399 @@ -682,7 +699,7 @@ properties: - const: pine64,quartzpro64 - const: rockchip,rk3588 - - description: Pine64 SoQuartz SoM + - description: Pine64 SOQuartz items: - enum: - pine64,soquartz-blade @@ -700,12 +717,17 @@ properties: - powkiddy,x55 - const: rockchip,rk3566 + - description: Protonic MECSBC board + items: + - const: prt,mecsbc + - const: rockchip,rk3568 + - description: QNAP TS-433-4G 4-Bay NAS items: - const: qnap,ts433 - const: rockchip,rk3568 - - description: Radxa Compute Module 3(CM3) + - description: Radxa Compute Module 3 (CM3) items: - enum: - radxa,cm3-io @@ -767,22 +789,27 @@ properties: - const: radxa,rockpis - const: rockchip,rk3308 - - description: Radxa Rock2 Square + - description: Radxa Rock 2 Square items: - const: radxa,rock2-square - const: rockchip,rk3288 - - description: Radxa ROCK3 Model A + - description: Radxa ROCK 3A items: - const: radxa,rock3a - const: rockchip,rk3568 - - description: Radxa ROCK 5 Model A + - description: Radxa ROCK 3C + items: + - const: radxa,rock-3c + - const: rockchip,rk3566 + + - description: Radxa ROCK 5A items: - const: radxa,rock-5a - const: rockchip,rk3588s - - description: Radxa ROCK 5 Model B + - description: Radxa ROCK 5B items: - const: radxa,rock-5b - const: rockchip,rk3588 @@ -927,6 +954,11 @@ properties: - const: turing,rk1 - const: rockchip,rk3588 + - description: WolfVision PF5 mainboard + items: + - const: wolfvision,rk3568-pf5 + - const: rockchip,rk3568 + - description: Xunlong Orange Pi 5 Plus items: - const: xunlong,orangepi-5-plus diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml index d2dce238ff..3e996346b2 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml @@ -54,11 +54,10 @@ unevaluatedProperties: false examples: - | - mlahb: ahb@38000000 { + ahb { compatible = "st,mlahb", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - reg = <0x10000000 0x40000>; ranges; dma-ranges = <0x00000000 0x38000000 0x10000>, <0x10000000 0x10000000 0x60000>, diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 09d835db6d..c2a158b75e 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -56,6 +56,21 @@ properties: - const: anbernic,rg-nano - const: allwinner,sun8i-v3s + - description: Anbernic RG35XX (2024) + items: + - const: anbernic,rg35xx-2024 + - const: allwinner,sun50i-h700 + + - description: Anbernic RG35XX Plus + items: + - const: anbernic,rg35xx-plus + - const: allwinner,sun50i-h700 + + - description: Anbernic RG35XX H + items: + - const: anbernic,rg35xx-h + - const: allwinner,sun50i-h700 + - description: Amarula A64 Relic items: - const: amarula,a64-relic @@ -774,6 +789,11 @@ properties: - const: pocketbook,touch-lux-3 - const: allwinner,sun5i-a13 + - description: PocketBook 614 Plus + items: + - const: pocketbook,614-plus + - const: allwinner,sun5i-a13 + - description: Point of View Protab2-IPS9 items: - const: pov,protab2-ips9 @@ -860,6 +880,11 @@ properties: - const: allwinner,sl631 - const: allwinner,sun8i-v3 + - description: Tanix TX1 + items: + - const: oranth,tanix-tx1 + - const: allwinner,sun50i-h616 + - description: Tanix TX6 items: - const: oranth,tanix-tx6 diff --git a/Documentation/devicetree/bindings/ata/ahci-da850.txt b/Documentation/devicetree/bindings/ata/ahci-da850.txt deleted file mode 100644 index 5f81934177..0000000000 --- a/Documentation/devicetree/bindings/ata/ahci-da850.txt +++ /dev/null @@ -1,18 +0,0 @@ -Device tree binding for the TI DA850 AHCI SATA Controller ---------------------------------------------------------- - -Required properties: - - compatible: must be "ti,da850-ahci" - - reg: physical base addresses and sizes of the two register regions - used by the controller: the register map as defined by the - AHCI 1.1 standard and the Power Down Control Register (PWRDN) - for enabling/disabling the SATA clock receiver - - interrupts: interrupt specifier (refer to the interrupt binding) - -Example: - - sata: sata@218000 { - compatible = "ti,da850-ahci"; - reg = <0x218000 0x2000>, <0x22c018 0x4>; - interrupts = <67>; - }; diff --git a/Documentation/devicetree/bindings/ata/fsl,imx-pata.yaml b/Documentation/devicetree/bindings/ata/fsl,imx-pata.yaml new file mode 100644 index 0000000000..324e2413bb --- /dev/null +++ b/Documentation/devicetree/bindings/ata/fsl,imx-pata.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/fsl,imx-pata.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX PATA Controller + +maintainers: + - Animesh Agarwal + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx31-pata + - fsl,imx51-pata + - const: fsl,imx27-pata + - const: fsl,imx27-pata + + reg: + maxItems: 1 + + interrupts: + items: + - description: PATA Controller interrupts + + clocks: + items: + - description: PATA Controller clocks + +additionalProperties: false + +examples: + - | + pata: pata@83fe0000 { + compatible = "fsl,imx51-pata", "fsl,imx27-pata"; + reg = <0x83fe0000 0x4000>; + interrupts = <70>; + clocks = <&clks 161>; + }; diff --git a/Documentation/devicetree/bindings/ata/imx-pata.txt b/Documentation/devicetree/bindings/ata/imx-pata.txt deleted file mode 100644 index f1172f0018..0000000000 --- a/Documentation/devicetree/bindings/ata/imx-pata.txt +++ /dev/null @@ -1,16 +0,0 @@ -* Freescale i.MX PATA Controller - -Required properties: -- compatible: "fsl,imx27-pata" -- reg: Address range of the PATA Controller -- interrupts: The interrupt of the PATA Controller -- clocks: the clocks for the PATA Controller - -Example: - - pata: pata@83fe0000 { - compatible = "fsl,imx51-pata", "fsl,imx27-pata"; - reg = <0x83fe0000 0x4000>; - interrupts = <70>; - clocks = <&clks 161>; - }; diff --git a/Documentation/devicetree/bindings/ata/ti,da850-ahci.yaml b/Documentation/devicetree/bindings/ata/ti,da850-ahci.yaml new file mode 100644 index 0000000000..ce13c76bdf --- /dev/null +++ b/Documentation/devicetree/bindings/ata/ti,da850-ahci.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/ti,da850-ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI DA850 AHCI SATA Controller + +maintainers: + - Animesh Agarwal + +properties: + compatible: + const: ti,da850-ahci + + reg: + items: + - description: Address and size of the register map as defined by the AHCI 1.1 standard. + - description: + Address and size of Power Down Control Register (PWRDN) for enabling/disabling the SATA clock + receiver. + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + sata@218000 { + compatible = "ti,da850-ahci"; + reg = <0x218000 0x2000>, <0x22c018 0x4>; + interrupts = <67>; + }; diff --git a/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml new file mode 100644 index 0000000000..d12b62a3a5 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/st,stm32-etzpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32 Extended TrustZone protection controller + +description: | + The ETZPC configures TrustZone security in a SoC having bus masters and + devices with programmable-security attributes (securable resources). + +maintainers: + - Gatien Chevallier + +select: + properties: + compatible: + contains: + const: st,stm32-etzpc + required: + - compatible + +properties: + compatible: + items: + - const: st,stm32-etzpc + - const: simple-bus + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + "#access-controller-cells": + const: 1 + description: + Contains the firewall ID associated to the peripheral. + +patternProperties: + "^.*@[0-9a-f]+$": + description: Peripherals + type: object + + additionalProperties: true + + required: + - access-controllers + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - "#access-controller-cells" + - ranges + +additionalProperties: false + +examples: + - | + // In this example, the usart2 device refers to rifsc as its access + // controller. + // Access rights are verified before creating devices. + + #include + #include + #include + + etzpc: bus@5c007000 { + compatible = "st,stm32-etzpc", "simple-bus"; + reg = <0x5c007000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + #access-controller-cells = <1>; + ranges; + + usart2: serial@4c001000 { + compatible = "st,stm32h7-uart"; + reg = <0x4c001000 0x400>; + interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART2_K>; + resets = <&rcc USART2_R>; + wakeup-source; + dmas = <&dmamux1 43 0x400 0x5>, + <&dmamux1 44 0x400 0x1>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 17>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml new file mode 100644 index 0000000000..20acd1a6b1 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/st,stm32mp25-rifsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32 Resource isolation framework security controller + +maintainers: + - Gatien Chevallier + +description: | + Resource isolation framework (RIF) is a comprehensive set of hardware blocks + designed to enforce and manage isolation of STM32 hardware resources like + memory and peripherals. + + The RIFSC (RIF security controller) is composed of three sets of registers, + each managing a specific set of hardware resources: + - RISC registers associated with RISUP logic (resource isolation device unit + for peripherals), assign all non-RIF aware peripherals to zero, one or + any security domains (secure, privilege, compartment). + - RIMC registers: associated with RIMU logic (resource isolation master + unit), assign all non RIF-aware bus master to one security domain by + setting secure, privileged and compartment information on the system bus. + Alternatively, the RISUP logic controlling the device port access to a + peripheral can assign target bus attributes to this peripheral master port + (supported attribute: CID). + - RISC registers associated with RISAL logic (resource isolation device unit + for address space - Lite version), assign address space subregions to one + security domains (secure, privilege, compartment). + +select: + properties: + compatible: + contains: + const: st,stm32mp25-rifsc + required: + - compatible + +properties: + compatible: + items: + - const: st,stm32mp25-rifsc + - const: simple-bus + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + "#access-controller-cells": + const: 1 + description: + Contains the firewall ID associated to the peripheral. + +patternProperties: + "^.*@[0-9a-f]+$": + description: Peripherals + type: object + + additionalProperties: true + + required: + - access-controllers + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - "#access-controller-cells" + - ranges + +additionalProperties: false + +examples: + - | + // In this example, the usart2 device refers to rifsc as its domain + // controller. + // Access rights are verified before creating devices. + + #include + + rifsc: bus@42080000 { + compatible = "st,stm32mp25-rifsc", "simple-bus"; + reg = <0x42080000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + #access-controller-cells = <1>; + ranges; + + usart2: serial@400e0000 { + compatible = "st,stm32h7-uart"; + reg = <0x400e0000 0x400>; + interrupts = ; + clocks = <&ck_flexgen_08>; + access-controllers = <&rifsc 32>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml index 79b0752faa..3f42666377 100644 --- a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml +++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml @@ -29,10 +29,13 @@ description: | properties: compatible: items: - - const: airoha,en7523-scu + - enum: + - airoha,en7523-scu + - airoha,en7581-scu reg: - maxItems: 2 + minItems: 2 + maxItems: 3 "#clock-cells": description: @@ -45,6 +48,30 @@ required: - reg - '#clock-cells' +allOf: + - if: + properties: + compatible: + const: airoha,en7523-scu + then: + properties: + reg: + items: + - description: scu base address + - description: misc scu base address + + - if: + properties: + compatible: + const: airoha,en7581-scu + then: + properties: + reg: + items: + - description: scu base address + - description: misc scu base address + - description: pb scu base address + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-clock.yaml index b0a4fb8256..90fb106606 100644 --- a/Documentation/devicetree/bindings/clock/fixed-clock.yaml +++ b/Documentation/devicetree/bindings/clock/fixed-clock.yaml @@ -11,6 +11,15 @@ maintainers: - Stephen Boyd properties: + $nodename: + anyOf: + - description: + Preferred name is 'clock-' with being the output + frequency as defined in the 'clock-frequency' property. + pattern: "^clock-([0-9]+|[a-z0-9-]+)$" + - description: Any name allowed + deprecated: true + compatible: const: fixed-clock diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml index 8f71ab3004..4afdb1c98f 100644 --- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml @@ -11,6 +11,15 @@ maintainers: - Stephen Boyd properties: + $nodename: + anyOf: + - description: + If the frequency is fixed, the preferred name is 'clock-' with + being the output frequency. + pattern: "^clock-([0-9]+|[0-9a-z-]+)$" + - description: Any name allowed + deprecated: true + compatible: enum: - fixed-factor-clock diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml index 1d2bcea41c..caf442ead2 100644 --- a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml +++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml @@ -30,16 +30,18 @@ properties: - google,gs101-cmu-top - google,gs101-cmu-apm - google,gs101-cmu-misc + - google,gs101-cmu-hsi0 + - google,gs101-cmu-hsi2 - google,gs101-cmu-peric0 - google,gs101-cmu-peric1 clocks: minItems: 1 - maxItems: 3 + maxItems: 5 clock-names: minItems: 1 - maxItems: 3 + maxItems: 5 "#clock-cells": const: 1 @@ -72,6 +74,55 @@ allOf: items: - const: oscclk + - if: + properties: + compatible: + contains: + const: google,gs101-cmu-hsi0 + + then: + properties: + clocks: + items: + - description: External reference clock (24.576 MHz) + - description: HSI0 bus clock (from CMU_TOP) + - description: DPGTC (from CMU_TOP) + - description: USB DRD controller clock (from CMU_TOP) + - description: USB Display Port debug clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: bus + - const: dpgtc + - const: usb31drd + - const: usbdpdbg + + - if: + properties: + compatible: + contains: + enum: + - google,gs101-cmu-hsi2 + + then: + properties: + clocks: + items: + - description: External reference clock (24.576 MHz) + - description: High Speed Interface bus clock (from CMU_TOP) + - description: High Speed Interface pcie clock (from CMU_TOP) + - description: High Speed Interface ufs clock (from CMU_TOP) + - description: High Speed Interface mmc clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: bus + - const: pcie + - const: ufs + - const: mmc + - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml index 63a5901598..4f79cdb417 100644 --- a/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml +++ b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml @@ -16,7 +16,9 @@ description: | properties: compatible: enum: - - loongson,ls2k-clk + - loongson,ls2k0500-clk + - loongson,ls2k-clk # This is for Loongson-2K1000 + - loongson,ls2k2000-clk reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/nxp,imx95-blk-ctl.yaml b/Documentation/devicetree/bindings/clock/nxp,imx95-blk-ctl.yaml new file mode 100644 index 0000000000..2dffc02dcd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nxp,imx95-blk-ctl.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/nxp,imx95-blk-ctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX95 Block Control + +maintainers: + - Peng Fan + +properties: + compatible: + items: + - enum: + - nxp,imx95-lvds-csr + - nxp,imx95-display-csr + - nxp,imx95-camera-csr + - nxp,imx95-vpu-csr + - const: syscon + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 1 + description: + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See + include/dt-bindings/clock/nxp,imx95-clock.h + +required: + - compatible + - reg + - '#clock-cells' + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + syscon@4c410000 { + compatible = "nxp,imx95-vpu-csr", "syscon"; + reg = <0x4c410000 0x10000>; + #clock-cells = <1>; + clocks = <&scmi_clk 114>; + power-domains = <&scmi_devpd 21>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/nxp,imx95-display-master-csr.yaml b/Documentation/devicetree/bindings/clock/nxp,imx95-display-master-csr.yaml new file mode 100644 index 0000000000..07f7412e76 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nxp,imx95-display-master-csr.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/nxp,imx95-display-master-csr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX95 Display Master Block Control + +maintainers: + - Peng Fan + +properties: + compatible: + items: + - const: nxp,imx95-display-master-csr + - const: syscon + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 1 + description: + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See + include/dt-bindings/clock/nxp,imx95-clock.h + + mux-controller: + type: object + $ref: /schemas/mux/reg-mux.yaml + +required: + - compatible + - reg + - '#clock-cells' + - mux-controller + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + syscon@4c410000 { + compatible = "nxp,imx95-display-master-csr", "syscon"; + reg = <0x4c410000 0x10000>; + #clock-cells = <1>; + clocks = <&scmi_clk 62>; + power-domains = <&scmi_devpd 3>; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4 0x00000001>; /* Pixel_link_sel */ + idle-states = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,hfpll.txt b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt deleted file mode 100644 index 5769cbbe76..0000000000 --- a/Documentation/devicetree/bindings/clock/qcom,hfpll.txt +++ /dev/null @@ -1,63 +0,0 @@ -High-Frequency PLL (HFPLL) - -PROPERTIES - -- compatible: - Usage: required - Value type: : - shall contain only one of the following. The generic - compatible "qcom,hfpll" should be also included. - - "qcom,hfpll-ipq8064", "qcom,hfpll" - "qcom,hfpll-apq8064", "qcom,hfpll" - "qcom,hfpll-msm8974", "qcom,hfpll" - "qcom,hfpll-msm8960", "qcom,hfpll" - "qcom,msm8976-hfpll-a53", "qcom,hfpll" - "qcom,msm8976-hfpll-a72", "qcom,hfpll" - "qcom,msm8976-hfpll-cci", "qcom,hfpll" - -- reg: - Usage: required - Value type: - Definition: address and size of HPLL registers. An optional second - element specifies the address and size of the alias - register region. - -- clocks: - Usage: required - Value type: - Definition: reference to the xo clock. - -- clock-names: - Usage: required - Value type: - Definition: must be "xo". - -- clock-output-names: - Usage: required - Value type: - Definition: Name of the PLL. Typically hfpllX where X is a CPU number - starting at 0. Otherwise hfpll_Y where Y is more specific - such as "l2". - -Example: - -1) An HFPLL for the L2 cache. - - clock-controller@f9016000 { - compatible = "qcom,hfpll-ipq8064", "qcom,hfpll"; - reg = <0xf9016000 0x30>; - clocks = <&xo_board>; - clock-names = "xo"; - clock-output-names = "hfpll_l2"; - }; - -2) An HFPLL for CPU0. This HFPLL has the alias register region. - - clock-controller@f908a000 { - compatible = "qcom,hfpll-ipq8064", "qcom,hfpll"; - reg = <0xf908a000 0x30>, <0xf900a000 0x30>; - clocks = <&xo_board>; - clock-names = "xo"; - clock-output-names = "hfpll0"; - }; diff --git a/Documentation/devicetree/bindings/clock/qcom,hfpll.yaml b/Documentation/devicetree/bindings/clock/qcom,hfpll.yaml new file mode 100644 index 0000000000..8cb1c164f7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,hfpll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm High-Frequency PLL + +maintainers: + - Bjorn Andersson + +description: + The HFPLL is used as CPU PLL on various Qualcomm SoCs. + +properties: + compatible: + oneOf: + - enum: + - qcom,msm8974-hfpll + - qcom,msm8976-hfpll-a53 + - qcom,msm8976-hfpll-a72 + - qcom,msm8976-hfpll-cci + - qcom,qcs404-hfpll + - const: qcom,hfpll + deprecated: true + + reg: + items: + - description: HFPLL registers + - description: Alias register region + minItems: 1 + + '#clock-cells': + const: 0 + + clocks: + items: + - description: board XO clock + + clock-names: + items: + - const: xo + + clock-output-names: + description: + Name of the PLL. Typically hfpllX where X is a CPU number starting at 0. + Otherwise hfpll_Y where Y is more specific such as "l2". + maxItems: 1 + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + - clock-output-names + +additionalProperties: false + +examples: + - | + clock-controller@f908a000 { + compatible = "qcom,msm8974-hfpll"; + reg = <0xf908a000 0x30>, <0xf900a000 0x30>; + #clock-cells = <0>; + clock-output-names = "hfpll0"; + clocks = <&xo_board>; + clock-names = "xo"; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml index 80a8c7114c..4e3b0c4512 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml @@ -57,7 +57,8 @@ properties: can be power-managed through Module Standby should refer to the CPG device node in their "power-domains" property, as documented by the generic PM Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml. - const: 0 + The power domain specifiers defined in could + be used to reference individual CPG power domains. '#reset-cells': description: @@ -76,6 +77,21 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + const: renesas,r9a08g045-cpg + then: + properties: + '#power-domain-cells': + const: 1 + else: + properties: + '#power-domain-cells': + const: 0 + examples: - | cpg: clock-controller@11010000 { diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c6400-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s3c6400-clock.yaml new file mode 100644 index 0000000000..0fcc0c963f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s3c6400-clock.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,s3c6400-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C6400 SoC clock controller + +maintainers: + - Krzysztof Kozlowski + +description: | + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names and/or provided as clock inputs to this clock controller: + - "fin_pll" - PLL input clock (xtal/extclk) - required, + - "xusbxti" - USB xtal - required, + - "iiscdclk0" - I2S0 codec clock - optional, + - "iiscdclk1" - I2S1 codec clock - optional, + - "iiscdclk2" - I2S2 codec clock - optional, + - "pcmcdclk0" - PCM0 codec clock - optional, + - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410. + + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/samsung,s3c64xx-clock.h header. + +properties: + compatible: + enum: + - samsung,s3c6400-clock + - samsung,s3c6410-clock + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - "#clock-cells" + +additionalProperties: false + +examples: + - | + clock-controller@7e00f000 { + compatible = "samsung,s3c6410-clock"; + reg = <0x7e00f000 0x1000>; + #clock-cells = <1>; + clocks = <&fin_pll>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt deleted file mode 100644 index 872ee8e0f0..0000000000 --- a/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt +++ /dev/null @@ -1,76 +0,0 @@ -* Samsung S3C64xx Clock Controller - -The S3C64xx clock controller generates and supplies clock to various controllers -within the SoC. The clock binding described here is applicable to all SoCs in -the S3C64xx family. - -Required Properties: - -- compatible: should be one of the following. - - "samsung,s3c6400-clock" - controller compatible with S3C6400 SoC. - - "samsung,s3c6410-clock" - controller compatible with S3C6410 SoC. - -- reg: physical base address of the controller and length of memory mapped - region. - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. Some of the clocks are available only -on a particular S3C64xx SoC and this is specified where applicable. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/samsung,s3c64xx-clock.h header and can be used in device -tree sources. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "fin_pll" - PLL input clock (xtal/extclk) - required, - - "xusbxti" - USB xtal - required, - - "iiscdclk0" - I2S0 codec clock - optional, - - "iiscdclk1" - I2S1 codec clock - optional, - - "iiscdclk2" - I2S2 codec clock - optional, - - "pcmcdclk0" - PCM0 codec clock - optional, - - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410. - -Example: Clock controller node: - - clock: clock-controller@7e00f000 { - compatible = "samsung,s3c6410-clock"; - reg = <0x7e00f000 0x1000>; - #clock-cells = <1>; - }; - -Example: Required external clocks: - - fin_pll: clock-fin-pll { - compatible = "fixed-clock"; - clock-output-names = "fin_pll"; - clock-frequency = <12000000>; - #clock-cells = <0>; - }; - - xusbxti: clock-xusbxti { - compatible = "fixed-clock"; - clock-output-names = "xusbxti"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller (refer to the standard clock bindings for information about - "clocks" and "clock-names" properties): - - uart0: serial@7f005000 { - compatible = "samsung,s3c6400-uart"; - reg = <0x7f005000 0x100>; - interrupt-parent = <&vic1>; - interrupts = <5>; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>, - <&clock SCLK_UART>; - }; diff --git a/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml b/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml index c1dc24673c..59ef41adb5 100644 --- a/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml +++ b/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/clock/sophgo,cv1800-clk.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Sophgo CV1800 Series Clock Controller +title: Sophgo CV1800/SG2000 Series Clock Controller maintainers: - Inochi Amaoto @@ -14,6 +14,7 @@ properties: enum: - sophgo,cv1800-clk - sophgo,cv1810-clk + - sophgo,sg2000-clk reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml index 7732e79a42..88e52f10d1 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml +++ b/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml @@ -38,14 +38,85 @@ properties: - description: CK_SCMI_MSI Low Power Internal oscillator (~ 4 MHz or ~ 16 MHz) - description: CK_SCMI_LSE Low Speed External oscillator (32 KHz) - description: CK_SCMI_LSI Low Speed Internal oscillator (~ 32 KHz) + - description: CK_SCMI_HSE_DIV2 CK_SCMI_HSE divided by 2 (coud be gated) + - description: CK_SCMI_ICN_HS_MCU High Speed interconnect bus clock + - description: CK_SCMI_ICN_LS_MCU Low Speed interconnect bus clock + - description: CK_SCMI_ICN_SDMMC SDMMC interconnect bus clock + - description: CK_SCMI_ICN_DDR DDR interconnect bus clock + - description: CK_SCMI_ICN_DISPLAY Display interconnect bus clock + - description: CK_SCMI_ICN_HSL HSL interconnect bus clock + - description: CK_SCMI_ICN_NIC NIC interconnect bus clock + - description: CK_SCMI_ICN_VID Video interconnect bus clock + - description: CK_SCMI_FLEXGEN_07 flexgen clock 7 + - description: CK_SCMI_FLEXGEN_08 flexgen clock 8 + - description: CK_SCMI_FLEXGEN_09 flexgen clock 9 + - description: CK_SCMI_FLEXGEN_10 flexgen clock 10 + - description: CK_SCMI_FLEXGEN_11 flexgen clock 11 + - description: CK_SCMI_FLEXGEN_12 flexgen clock 12 + - description: CK_SCMI_FLEXGEN_13 flexgen clock 13 + - description: CK_SCMI_FLEXGEN_14 flexgen clock 14 + - description: CK_SCMI_FLEXGEN_15 flexgen clock 15 + - description: CK_SCMI_FLEXGEN_16 flexgen clock 16 + - description: CK_SCMI_FLEXGEN_17 flexgen clock 17 + - description: CK_SCMI_FLEXGEN_18 flexgen clock 18 + - description: CK_SCMI_FLEXGEN_19 flexgen clock 19 + - description: CK_SCMI_FLEXGEN_20 flexgen clock 20 + - description: CK_SCMI_FLEXGEN_21 flexgen clock 21 + - description: CK_SCMI_FLEXGEN_22 flexgen clock 22 + - description: CK_SCMI_FLEXGEN_23 flexgen clock 23 + - description: CK_SCMI_FLEXGEN_24 flexgen clock 24 + - description: CK_SCMI_FLEXGEN_25 flexgen clock 25 + - description: CK_SCMI_FLEXGEN_26 flexgen clock 26 + - description: CK_SCMI_FLEXGEN_27 flexgen clock 27 + - description: CK_SCMI_FLEXGEN_28 flexgen clock 28 + - description: CK_SCMI_FLEXGEN_29 flexgen clock 29 + - description: CK_SCMI_FLEXGEN_30 flexgen clock 30 + - description: CK_SCMI_FLEXGEN_31 flexgen clock 31 + - description: CK_SCMI_FLEXGEN_32 flexgen clock 32 + - description: CK_SCMI_FLEXGEN_33 flexgen clock 33 + - description: CK_SCMI_FLEXGEN_34 flexgen clock 34 + - description: CK_SCMI_FLEXGEN_35 flexgen clock 35 + - description: CK_SCMI_FLEXGEN_36 flexgen clock 36 + - description: CK_SCMI_FLEXGEN_37 flexgen clock 37 + - description: CK_SCMI_FLEXGEN_38 flexgen clock 38 + - description: CK_SCMI_FLEXGEN_39 flexgen clock 39 + - description: CK_SCMI_FLEXGEN_40 flexgen clock 40 + - description: CK_SCMI_FLEXGEN_41 flexgen clock 41 + - description: CK_SCMI_FLEXGEN_42 flexgen clock 42 + - description: CK_SCMI_FLEXGEN_43 flexgen clock 43 + - description: CK_SCMI_FLEXGEN_44 flexgen clock 44 + - description: CK_SCMI_FLEXGEN_45 flexgen clock 45 + - description: CK_SCMI_FLEXGEN_46 flexgen clock 46 + - description: CK_SCMI_FLEXGEN_47 flexgen clock 47 + - description: CK_SCMI_FLEXGEN_48 flexgen clock 48 + - description: CK_SCMI_FLEXGEN_49 flexgen clock 49 + - description: CK_SCMI_FLEXGEN_50 flexgen clock 50 + - description: CK_SCMI_FLEXGEN_51 flexgen clock 51 + - description: CK_SCMI_FLEXGEN_52 flexgen clock 52 + - description: CK_SCMI_FLEXGEN_53 flexgen clock 53 + - description: CK_SCMI_FLEXGEN_54 flexgen clock 54 + - description: CK_SCMI_FLEXGEN_55 flexgen clock 55 + - description: CK_SCMI_FLEXGEN_56 flexgen clock 56 + - description: CK_SCMI_FLEXGEN_57 flexgen clock 57 + - description: CK_SCMI_FLEXGEN_58 flexgen clock 58 + - description: CK_SCMI_FLEXGEN_59 flexgen clock 59 + - description: CK_SCMI_FLEXGEN_60 flexgen clock 60 + - description: CK_SCMI_FLEXGEN_61 flexgen clock 61 + - description: CK_SCMI_FLEXGEN_62 flexgen clock 62 + - description: CK_SCMI_FLEXGEN_63 flexgen clock 63 + - description: CK_SCMI_ICN_APB1 Peripheral bridge 1 + - description: CK_SCMI_ICN_APB2 Peripheral bridge 2 + - description: CK_SCMI_ICN_APB3 Peripheral bridge 3 + - description: CK_SCMI_ICN_APB4 Peripheral bridge 4 + - description: CK_SCMI_ICN_APBDBG Peripheral bridge for degub + - description: CK_SCMI_TIMG1 Peripheral bridge for timer1 + - description: CK_SCMI_TIMG2 Peripheral bridge for timer2 + - description: CK_SCMI_PLL3 PLL3 clock + - description: clk_dsi_txbyte DSI byte clock - clock-names: - items: - - const: hse - - const: hsi - - const: msi - - const: lse - - const: lsi + access-controllers: + minItems: 1 + maxItems: 2 required: - compatible @@ -53,7 +124,6 @@ required: - '#clock-cells' - '#reset-cells' - clocks - - clock-names additionalProperties: false @@ -66,11 +136,85 @@ examples: reg = <0x44200000 0x10000>; #clock-cells = <1>; #reset-cells = <1>; - clock-names = "hse", "hsi", "msi", "lse", "lsi"; - clocks = <&scmi_clk CK_SCMI_HSE>, - <&scmi_clk CK_SCMI_HSI>, - <&scmi_clk CK_SCMI_MSI>, - <&scmi_clk CK_SCMI_LSE>, - <&scmi_clk CK_SCMI_LSI>; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_MSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>, + <&scmi_clk CK_SCMI_HSE_DIV2>, + <&scmi_clk CK_SCMI_ICN_HS_MCU>, + <&scmi_clk CK_SCMI_ICN_LS_MCU>, + <&scmi_clk CK_SCMI_ICN_SDMMC>, + <&scmi_clk CK_SCMI_ICN_DDR>, + <&scmi_clk CK_SCMI_ICN_DISPLAY>, + <&scmi_clk CK_SCMI_ICN_HSL>, + <&scmi_clk CK_SCMI_ICN_NIC>, + <&scmi_clk CK_SCMI_ICN_VID>, + <&scmi_clk CK_SCMI_FLEXGEN_07>, + <&scmi_clk CK_SCMI_FLEXGEN_08>, + <&scmi_clk CK_SCMI_FLEXGEN_09>, + <&scmi_clk CK_SCMI_FLEXGEN_10>, + <&scmi_clk CK_SCMI_FLEXGEN_11>, + <&scmi_clk CK_SCMI_FLEXGEN_12>, + <&scmi_clk CK_SCMI_FLEXGEN_13>, + <&scmi_clk CK_SCMI_FLEXGEN_14>, + <&scmi_clk CK_SCMI_FLEXGEN_15>, + <&scmi_clk CK_SCMI_FLEXGEN_16>, + <&scmi_clk CK_SCMI_FLEXGEN_17>, + <&scmi_clk CK_SCMI_FLEXGEN_18>, + <&scmi_clk CK_SCMI_FLEXGEN_19>, + <&scmi_clk CK_SCMI_FLEXGEN_20>, + <&scmi_clk CK_SCMI_FLEXGEN_21>, + <&scmi_clk CK_SCMI_FLEXGEN_22>, + <&scmi_clk CK_SCMI_FLEXGEN_23>, + <&scmi_clk CK_SCMI_FLEXGEN_24>, + <&scmi_clk CK_SCMI_FLEXGEN_25>, + <&scmi_clk CK_SCMI_FLEXGEN_26>, + <&scmi_clk CK_SCMI_FLEXGEN_27>, + <&scmi_clk CK_SCMI_FLEXGEN_28>, + <&scmi_clk CK_SCMI_FLEXGEN_29>, + <&scmi_clk CK_SCMI_FLEXGEN_30>, + <&scmi_clk CK_SCMI_FLEXGEN_31>, + <&scmi_clk CK_SCMI_FLEXGEN_32>, + <&scmi_clk CK_SCMI_FLEXGEN_33>, + <&scmi_clk CK_SCMI_FLEXGEN_34>, + <&scmi_clk CK_SCMI_FLEXGEN_35>, + <&scmi_clk CK_SCMI_FLEXGEN_36>, + <&scmi_clk CK_SCMI_FLEXGEN_37>, + <&scmi_clk CK_SCMI_FLEXGEN_38>, + <&scmi_clk CK_SCMI_FLEXGEN_39>, + <&scmi_clk CK_SCMI_FLEXGEN_40>, + <&scmi_clk CK_SCMI_FLEXGEN_41>, + <&scmi_clk CK_SCMI_FLEXGEN_42>, + <&scmi_clk CK_SCMI_FLEXGEN_43>, + <&scmi_clk CK_SCMI_FLEXGEN_44>, + <&scmi_clk CK_SCMI_FLEXGEN_45>, + <&scmi_clk CK_SCMI_FLEXGEN_46>, + <&scmi_clk CK_SCMI_FLEXGEN_47>, + <&scmi_clk CK_SCMI_FLEXGEN_48>, + <&scmi_clk CK_SCMI_FLEXGEN_49>, + <&scmi_clk CK_SCMI_FLEXGEN_50>, + <&scmi_clk CK_SCMI_FLEXGEN_51>, + <&scmi_clk CK_SCMI_FLEXGEN_52>, + <&scmi_clk CK_SCMI_FLEXGEN_53>, + <&scmi_clk CK_SCMI_FLEXGEN_54>, + <&scmi_clk CK_SCMI_FLEXGEN_55>, + <&scmi_clk CK_SCMI_FLEXGEN_56>, + <&scmi_clk CK_SCMI_FLEXGEN_57>, + <&scmi_clk CK_SCMI_FLEXGEN_58>, + <&scmi_clk CK_SCMI_FLEXGEN_59>, + <&scmi_clk CK_SCMI_FLEXGEN_60>, + <&scmi_clk CK_SCMI_FLEXGEN_61>, + <&scmi_clk CK_SCMI_FLEXGEN_62>, + <&scmi_clk CK_SCMI_FLEXGEN_63>, + <&scmi_clk CK_SCMI_ICN_APB1>, + <&scmi_clk CK_SCMI_ICN_APB2>, + <&scmi_clk CK_SCMI_ICN_APB3>, + <&scmi_clk CK_SCMI_ICN_APB4>, + <&scmi_clk CK_SCMI_ICN_APBDBG>, + <&scmi_clk CK_SCMI_TIMG1>, + <&scmi_clk CK_SCMI_TIMG2>, + <&scmi_clk CK_SCMI_PLL3>, + <&clk_dsi_txbyte>; }; ... diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml index 56fc71d6a0..1e9797f964 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml @@ -38,6 +38,7 @@ properties: - qcom,sc7280-cpufreq-epss - qcom,sc8280xp-cpufreq-epss - qcom,sdx75-cpufreq-epss + - qcom,sm4450-cpufreq-epss - qcom,sm6375-cpufreq-epss - qcom,sm8250-cpufreq-epss - qcom,sm8350-cpufreq-epss @@ -133,6 +134,7 @@ allOf: - qcom,sc8280xp-cpufreq-epss - qcom,sdm670-cpufreq-hw - qcom,sdm845-cpufreq-hw + - qcom,sm4450-cpufreq-epss - qcom,sm6115-cpufreq-hw - qcom,sm6350-cpufreq-hw - qcom,sm6375-cpufreq-epss diff --git a/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-aes.yaml b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-aes.yaml new file mode 100644 index 0000000000..cb47ae2889 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-aes.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/nvidia,tegra234-se-aes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Security Engine for AES algorithms + +description: + The Tegra Security Engine accelerates the following AES encryption/decryption + algorithms - AES-ECB, AES-CBC, AES-OFB, AES-XTS, AES-CTR, AES-GCM, AES-CCM, + AES-CMAC + +maintainers: + - Akhil R + +properties: + compatible: + const: nvidia,tegra234-se-aes + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include + #include + + crypto@15820000 { + compatible = "nvidia,tegra234-se-aes"; + reg = <0x15820000 0x10000>; + clocks = <&bpmp TEGRA234_CLK_SE>; + iommus = <&smmu TEGRA234_SID_SES_SE1>; + dma-coherent; + }; +... diff --git a/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-hash.yaml b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-hash.yaml new file mode 100644 index 0000000000..f57ef10645 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-hash.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/nvidia,tegra234-se-hash.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Security Engine for HASH algorithms + +description: + The Tegra Security HASH Engine accelerates the following HASH functions - + SHA1, SHA224, SHA256, SHA384, SHA512, SHA3-224, SHA3-256, SHA3-384, SHA3-512 + HMAC(SHA224), HMAC(SHA256), HMAC(SHA384), HMAC(SHA512) + +maintainers: + - Akhil R + +properties: + compatible: + const: nvidia,tegra234-se-hash + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include + #include + + crypto@15840000 { + compatible = "nvidia,tegra234-se-hash"; + reg = <0x15840000 0x10000>; + clocks = <&bpmp TEGRA234_CLK_SE>; + iommus = <&smmu TEGRA234_SID_SES_SE2>; + dma-coherent; + }; +... diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt deleted file mode 100644 index ad91155696..0000000000 --- a/Documentation/devicetree/bindings/crypto/omap-sham.txt +++ /dev/null @@ -1,28 +0,0 @@ -OMAP SoC SHA crypto Module - -Required properties: - -- compatible : Should contain entries for this and backward compatible - SHAM versions: - - "ti,omap2-sham" for OMAP2 & OMAP3. - - "ti,omap4-sham" for OMAP4 and AM33XX. - - "ti,omap5-sham" for OMAP5, DRA7 and AM43XX. -- ti,hwmods: Name of the hwmod associated with the SHAM module -- reg : Offset and length of the register set for the module -- interrupts : the interrupt-specifier for the SHAM module. - -Optional properties: -- dmas: DMA specifiers for the rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: DMA request name. Should be "rx" if a dma is present. - -Example: - /* AM335x */ - sham: sham@53100000 { - compatible = "ti,omap4-sham"; - ti,hwmods = "sham"; - reg = <0x53100000 0x200>; - interrupts = <109>; - dmas = <&edma 36>; - dma-names = "rx"; - }; diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml index e91bc7dc6a..0304f074cf 100644 --- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml @@ -15,6 +15,7 @@ properties: - enum: - qcom,sa8775p-inline-crypto-engine - qcom,sc7180-inline-crypto-engine + - qcom,sc7280-inline-crypto-engine - qcom,sm8450-inline-crypto-engine - qcom,sm8550-inline-crypto-engine - qcom,sm8650-inline-crypto-engine diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml index 0ddeb8a9a7..27354658d0 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml @@ -46,6 +46,10 @@ properties: power-domains: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml index ac480765cd..8223184140 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml @@ -51,6 +51,10 @@ properties: power-domains: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml index 71a2876bd6..7ccb6e1641 100644 --- a/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml @@ -12,7 +12,9 @@ maintainers: properties: compatible: - const: starfive,jh7110-crypto + enum: + - starfive,jh7110-crypto + - starfive,jh8100-crypto reg: maxItems: 1 @@ -28,7 +30,10 @@ properties: - const: ahb interrupts: - maxItems: 1 + minItems: 1 + items: + - description: SHA2 module irq + - description: SM3 module irq resets: maxItems: 1 @@ -54,6 +59,27 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + const: starfive,jh7110-crypto + + then: + properties: + interrupts: + maxItems: 1 + + - if: + properties: + compatible: + const: starfive,jh8100-crypto + + then: + properties: + interrupts: + minItems: 2 + examples: - | crypto: crypto@16000000 { diff --git a/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml b/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml new file mode 100644 index 0000000000..d69b502280 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/ti,omap-sham.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OMAP SoC SHA crypto Module + +maintainers: + - Animesh Agarwal + +properties: + compatible: + enum: + - ti,omap2-sham + - ti,omap4-sham + - ti,omap5-sham + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + const: rx + + ti,hwmods: + description: Name of the hwmod associated with the SHAM module + $ref: /schemas/types.yaml#/definitions/string + enum: [sham] + +dependencies: + dmas: [dma-names] + +additionalProperties: false + +required: + - compatible + - ti,hwmods + - reg + - interrupts + +examples: + - | + sham@53100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + reg = <0x53100000 0x200>; + interrupts = <109>; + dmas = <&edma 36>; + dma-names = "rx"; + }; diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml b/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml new file mode 100644 index 0000000000..a5cf040ab4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/atmel,lcdc-display.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip's LCDC Display + +maintainers: + - Nicolas Ferre + - Dharma Balasubiramani + +description: + The LCD Controller (LCDC) consists of logic for transferring LCD image data + from an external display buffer to a TFT LCD panel. The LCDC has one display + input buffer per layer that fetches pixels through the single bus host + interface and a look-up table to allow palletized display configurations. The + LCDC is programmable on a per layer basis, and supports different LCD + resolutions, window sizes, image formats and pixel depths. + +# We need a select here since this schema is applicable only for nodes with the +# following properties + +select: + anyOf: + - required: [ 'atmel,dmacon' ] + - required: [ 'atmel,lcdcon2' ] + - required: [ 'atmel,guard-time' ] + +properties: + atmel,dmacon: + $ref: /schemas/types.yaml#/definitions/uint32 + description: dma controller configuration + + atmel,lcdcon2: + $ref: /schemas/types.yaml#/definitions/uint32 + description: lcd controller configuration + + atmel,guard-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: lcd guard time (Delay in frame periods) + maximum: 127 + + bits-per-pixel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: lcd panel bit-depth. + enum: [1, 2, 4, 8, 16, 24, 32] + + atmel,lcdcon-backlight: + $ref: /schemas/types.yaml#/definitions/flag + description: enable backlight + + atmel,lcdcon-backlight-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: invert backlight PWM polarity + + atmel,lcd-wiring-mode: + $ref: /schemas/types.yaml#/definitions/string + description: lcd wiring mode "RGB" or "BRG" + enum: + - RGB + - BRG + + atmel,power-control-gpio: + description: gpio to power on or off the LCD (as many as needed) + maxItems: 1 + + display-timings: + $ref: panel/display-timings.yaml# + +required: + - atmel,dmacon + - atmel,lcdcon2 + - atmel,guard-time + - bits-per-pixel + +additionalProperties: false + +examples: + - | + display: panel { + bits-per-pixel = <32>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <9>; + atmel,lcd-wiring-mode = "RGB"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hback-porch = <1>; + hfront-porch = <1>; + vback-porch = <40>; + vfront-porch = <1>; + hsync-len = <45>; + vsync-len = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt deleted file mode 100644 index b5e355ada2..0000000000 --- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt +++ /dev/null @@ -1,87 +0,0 @@ -Atmel LCDC Framebuffer ------------------------------------------------------ - -Required properties: -- compatible : - "atmel,at91sam9261-lcdc" , - "atmel,at91sam9263-lcdc" , - "atmel,at91sam9g10-lcdc" , - "atmel,at91sam9g45-lcdc" , - "atmel,at91sam9g45es-lcdc" , - "atmel,at91sam9rl-lcdc" , -- reg : Should contain 1 register ranges(address and length). - Can contain an additional register range(address and length) - for fixed framebuffer memory. Useful for dedicated memories. -- interrupts : framebuffer controller interrupt -- display: a phandle pointing to the display node - -Required nodes: -- display: a display node is required to initialize the lcd panel - This should be in the board dts. -- default-mode: a videomode within the display with timing parameters - as specified below. - -Optional properties: -- lcd-supply: Regulator for LCD supply voltage. - -Example: - - fb0: fb@00500000 { - compatible = "atmel,at91sam9g45-lcdc"; - reg = <0x00500000 0x1000>; - interrupts = <23 3 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fb>; - display = <&display0>; - #address-cells = <1>; - #size-cells = <1>; - - }; - -Example for fixed framebuffer memory: - - fb0: fb@00500000 { - compatible = "atmel,at91sam9263-lcdc"; - reg = <0x00700000 0x1000 0x70000000 0x200000>; - [...] - }; - -Atmel LCDC Display ------------------------------------------------------ -Required properties (as per of_videomode_helper): - - - atmel,dmacon: dma controller configuration - - atmel,lcdcon2: lcd controller configuration - - atmel,guard-time: lcd guard time (Delay in frame periods) - - bits-per-pixel: lcd panel bit-depth. - -Optional properties (as per of_videomode_helper): - - atmel,lcdcon-backlight: enable backlight - - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity - - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG" - - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed) - -Example: - display0: display { - bits-per-pixel = <32>; - atmel,lcdcon-backlight; - atmel,dmacon = <0x1>; - atmel,lcdcon2 = <0x80008002>; - atmel,guard-time = <9>; - atmel,lcd-wiring-mode = <1>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hback-porch = <1>; - hfront-porch = <1>; - vback-porch = <40>; - vfront-porch = <1>; - hsync-len = <45>; - vsync-len = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.yaml b/Documentation/devicetree/bindings/display/atmel,lcdc.yaml new file mode 100644 index 0000000000..1b6f7e3950 --- /dev/null +++ b/Documentation/devicetree/bindings/display/atmel,lcdc.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/atmel,lcdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip's LCDC Framebuffer + +maintainers: + - Nicolas Ferre + - Dharma Balasubiramani + +description: + The LCDC works with a framebuffer, which is a section of memory that contains + a complete frame of data representing pixel values for the display. The LCDC + reads the pixel data from the framebuffer and sends it to the LCD panel to + render the image. + +properties: + compatible: + enum: + - atmel,at91sam9261-lcdc + - atmel,at91sam9263-lcdc + - atmel,at91sam9g10-lcdc + - atmel,at91sam9g45-lcdc + - atmel,at91sam9g45es-lcdc + - atmel,at91sam9rl-lcdc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: hclk + - const: lcdc_clk + + display: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle pointing to the display node. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - display + +additionalProperties: false + +examples: + - | + #include + #include + fb@500000 { + compatible = "atmel,at91sam9g45-lcdc"; + reg = <0x00500000 0x1000>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>; + clock-names = "hclk", "lcdc_clk"; + display = <&display>; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml index c9a882ee6d..c4469f4639 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml @@ -9,6 +9,9 @@ title: ITE it6505 maintainers: - Allen Chen +allOf: + - $ref: /schemas/sound/dai-common.yaml# + description: | The IT6505 is a high-performance DisplayPort 1.1a transmitter, fully compliant with DisplayPort 1.1a, HDCP 1.3 specifications. @@ -52,6 +55,9 @@ properties: maxItems: 1 description: extcon specifier for the Power Delivery + "#sound-dai-cells": + const: 0 + ports: $ref: /schemas/graph.yaml#/properties/ports @@ -105,7 +111,7 @@ required: - extcon - ports -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index 84aafcbf09..6ceeed76e8 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -41,6 +41,7 @@ properties: - enum: - ti,ds90cf364a # For the DS90CF364A FPD-Link LVDS Receiver - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver + - ti,sn65lvds94 # For the SN65DS94 LVDS serdes - const: lvds-decoder # Generic LVDS decoders compatible fallback - enum: - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer diff --git a/Documentation/devicetree/bindings/display/bridge/microchip,sam9x75-lvds.yaml b/Documentation/devicetree/bindings/display/bridge/microchip,sam9x75-lvds.yaml new file mode 100644 index 0000000000..862ef441ac --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/microchip,sam9x75-lvds.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/microchip,sam9x75-lvds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip SAM9X75 LVDS Controller + +maintainers: + - Dharma Balasubiramani + +description: + The Low Voltage Differential Signaling Controller (LVDSC) manages data + format conversion from the LCD Controller internal DPI bus to OpenLDI + LVDS output signals. LVDSC functions include bit mapping, balanced mode + management, and serializer. + +properties: + compatible: + const: microchip,sam9x75-lvds + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Peripheral Bus Clock + + clock-names: + items: + - const: pclk + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + #include + lvds-controller@f8060000 { + compatible = "microchip,sam9x75-lvds"; + reg = <0xf8060000 0x100>; + interrupts = <56 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 56>; + clock-names = "pclk"; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml index d879c70059..258dd9cfd7 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml @@ -10,7 +10,7 @@ maintainers: - Vinay Simha BN description: | - This binding supports DSI to LVDS bridge TC358775 + This binding supports DSI to LVDS bridges TC358765 and TC358775 MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane. Video frame size: @@ -21,7 +21,9 @@ description: | properties: compatible: - const: toshiba,tc358775 + enum: + - toshiba,tc358765 + - toshiba,tc358775 reg: maxItems: 1 @@ -46,11 +48,27 @@ properties: properties: port@0: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: | DSI Input. The remote endpoint phandle should be a reference to a valid mipi_dsi_host device node. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + port@1: $ref: /schemas/graph.yaml#/properties/port description: | @@ -70,10 +88,19 @@ required: - reg - vdd-supply - vddio-supply - - stby-gpios - reset-gpios - ports +allOf: + - if: + properties: + compatible: + contains: + const: toshiba,tc358765 + then: + properties: + stby-gpios: false + additionalProperties: false examples: @@ -108,6 +135,7 @@ examples: reg = <0>; d2l_in_test: endpoint { remote-endpoint = <&dsi0_out>; + data-lanes = <1 2 3 4>; }; }; @@ -132,7 +160,6 @@ examples: reg = <1>; dsi0_out: endpoint { remote-endpoint = <&d2l_in_test>; - data-lanes = <0 1 2 3>; }; }; }; @@ -167,6 +194,7 @@ examples: reg = <0>; d2l_in_dual: endpoint { remote-endpoint = <&dsi0_out_dual>; + data-lanes = <1 2 3 4>; }; }; @@ -198,7 +226,6 @@ examples: reg = <1>; dsi0_out_dual: endpoint { remote-endpoint = <&d2l_in_dual>; - data-lanes = <0 1 2 3>; }; }; }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt deleted file mode 100644 index 3a40159032..0000000000 --- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt +++ /dev/null @@ -1,112 +0,0 @@ -The Exynos display port interface should be configured based on -the type of panel connected to it. - -We use two nodes: - -dp-controller node - -dptx-phy node(defined inside dp-controller node) - -For the DP-PHY initialization, we use the dptx-phy node. -Required properties for dptx-phy: deprecated, use phys and phy-names - -reg: deprecated - Base address of DP PHY register. - -samsung,enable-mask: deprecated - The bit-mask used to enable/disable DP PHY. - -For the Panel initialization, we read data from dp-controller node. -Required properties for dp-controller: - -compatible: - should be "samsung,exynos5-dp". - -reg: - physical base address of the controller and length - of memory mapped region. - -interrupts: - interrupt combiner values. - -clocks: - from common clock binding: handle to dp clock. - -clock-names: - from common clock binding: Shall be "dp". - -phys: - from general PHY binding: the phandle for the PHY device. - -phy-names: - from general PHY binding: Should be "dp". - -Optional properties for dp-controller: - -interlaced: - interlace scan mode. - Progressive if defined, Interlaced if not defined - -vsync-active-high: - VSYNC polarity configuration. - High if defined, Low if not defined - -hsync-active-high: - HSYNC polarity configuration. - High if defined, Low if not defined - -samsung,hpd-gpio: - Hotplug detect GPIO. - Indicates which GPIO should be used for hotplug - detection - -video interfaces: Device node can contain video interface port - nodes according to [1]. - - display-timings: timings for the connected panel as described by - Documentation/devicetree/bindings/display/panel/display-timing.txt - -For the below properties, please refer to Analogix DP binding document: - * Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml - -phys (required) - -phy-names (required) - -hpd-gpios (optional) - force-hpd (optional) - -Deprecated properties for DisplayPort: --interlaced: deprecated prop that can parsed from drm_display_mode. --vsync-active-high: deprecated prop that can parsed from drm_display_mode. --hsync-active-high: deprecated prop that can parsed from drm_display_mode. --samsung,ycbcr-coeff: deprecated prop that can parsed from drm_display_mode. --samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode. --samsung,color-space: deprecated prop that can parsed from drm_display_info. --samsung,color-depth: deprecated prop that can parsed from drm_display_info. --samsung,link-rate: deprecated prop that can reading from monitor by dpcd method. --samsung,lane-count: deprecated prop that can reading from monitor by dpcd method. --samsung,hpd-gpio: deprecated name for hpd-gpios. - -------------------------------------------------------------------------------- - -Example: - -SOC specific portion: - dp-controller { - compatible = "samsung,exynos5-dp"; - reg = <0x145b0000 0x10000>; - interrupts = <10 3>; - interrupt-parent = <&combiner>; - clocks = <&clock 342>; - clock-names = "dp"; - - phys = <&dp_phy>; - phy-names = "dp"; - }; - -Board Specific portion: - dp-controller { - display-timings { - native-mode = <&lcd_timing>; - lcd_timing: 1366x768 { - clock-frequency = <70589280>; - hactive = <1366>; - vactive = <768>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <32>; - vback-porch = <10>; - vfront-porch = <12>; - vsync-len = <6>; - }; - }; - - ports { - port@0 { - dp_out: endpoint { - remote-endpoint = <&bridge_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml index c6641acd75..b8b8e83ebc 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml @@ -24,6 +24,7 @@ properties: - enum: - mediatek,mt8173-disp-gamma - mediatek,mt8183-disp-gamma + - mediatek,mt8195-disp-gamma - items: - enum: - mediatek,mt6795-disp-gamma @@ -35,6 +36,10 @@ properties: - mediatek,mt8192-disp-gamma - mediatek,mt8195-disp-gamma - const: mediatek,mt8183-disp-gamma + - items: + - enum: + - mediatek,mt8188-disp-gamma + - const: mediatek,mt8195-disp-gamma reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index ae53cbfb21..97993feda1 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -29,6 +29,7 @@ properties: - qcom,sm8650-dp - items: - enum: + - qcom,sm6350-dp - qcom,sm8150-dp - qcom,sm8250-dp - qcom,sm8450-dp diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml index c9ba1fae80..bba666bdff 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml @@ -53,6 +53,15 @@ patternProperties: compatible: const: qcom,sm6350-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + const: qcom,sm6350-dp + "^dsi@[0-9a-f]+$": type: object additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml index acd2f3faa6..0aa2d3fbad 100644 --- a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml +++ b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml @@ -17,10 +17,12 @@ properties: compatible: const: abt,y030xx067a + reg: + maxItems: 1 + backlight: true port: true power-supply: true - reg: true reset-gpios: true required: diff --git a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml index 75a09df68b..2399cabf04 100644 --- a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml +++ b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml @@ -21,7 +21,10 @@ allOf: properties: compatible: const: asus,z00t-tm5p5-n35596 - reg: true + + reg: + maxItems: 1 + reset-gpios: true vdd-supply: description: core voltage supply diff --git a/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml index a8f3afa922..8b7448ad91 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml @@ -26,6 +26,9 @@ properties: compatible: const: boe,bf060y8m-aj0 + reg: + maxItems: 1 + elvdd-supply: description: EL Driving positive (VDD) supply (4.40-4.80V) elvss-supply: @@ -38,7 +41,6 @@ properties: description: I/O voltage supply (1.62-1.98V) port: true - reg: true reset-gpios: true required: diff --git a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml index 272a3a018a..f2496cdd92 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml @@ -18,9 +18,11 @@ properties: - const: boe,himax8279d8p - const: boe,himax8279d10p + reg: + maxItems: 1 + backlight: true enable-gpios: true - reg: true pp33-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml index 32df26cbfe..5eaccce13c 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml @@ -18,7 +18,9 @@ properties: # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel - boe,th101mb31ig002-28a - reg: true + reg: + maxItems: 1 + backlight: true enable-gpios: true power-supply: true diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml index 906ef62709..9e603cad13 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -38,7 +38,7 @@ properties: - starry,ili9882t reg: - description: the virtual channel number of a DSI peripheral + maxItems: 1 enable-gpios: description: a GPIO spec for the enable pin diff --git a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml index 265ab6d305..f4cb825d1e 100644 --- a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml +++ b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: elida,kd35t133 - reg: true + + reg: + maxItems: 1 + backlight: true port: true reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml index d13c4bd26d..9847da784c 100644 --- a/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml +++ b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml @@ -17,6 +17,9 @@ properties: compatible: const: fascontek,fs035vg158 + reg: + maxItems: 1 + spi-3wire: true required: diff --git a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml index 81adb82f06..0d8707a584 100644 --- a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml +++ b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: feixin,k101-im2ba02 - reg: true + + reg: + maxItems: 1 + backlight: true reset-gpios: true avdd-supply: diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml index 174661d138..56bcd152f4 100644 --- a/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml +++ b/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml @@ -21,6 +21,9 @@ properties: contains: const: djn,9a-3r063-1102b + reg: + maxItems: 1 + vdd1-supply: description: Digital voltage rail @@ -30,7 +33,6 @@ properties: vsp-supply: description: Negative source voltage rail - reg: true port: true required: diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml index 916bb7f942..644387e4fb 100644 --- a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml +++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml @@ -26,7 +26,8 @@ properties: - powkiddy,x55-panel - const: himax,hx8394 - reg: true + reg: + maxItems: 1 reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml index 3cabbba865..ef5a2240b6 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml @@ -24,6 +24,9 @@ properties: - newhaven,1.8-128160EF - const: ilitek,ili9163 + reg: + maxItems: 1 + spi-max-frequency: maximum: 32000000 @@ -32,7 +35,6 @@ properties: description: Display data/command selection (D/CX) backlight: true - reg: true reset-gpios: true rotation: true diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml index 7d221ef354..44423465f6 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml @@ -26,6 +26,9 @@ properties: - dlink,dir-685-panel - const: ilitek,ili9322 + reg: + maxItems: 1 + reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml index 94f169ea06..5f41758c96 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml @@ -28,7 +28,8 @@ properties: - canaan,kd233-tft - const: ilitek,ili9341 - reg: true + reg: + maxItems: 1 dc-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml index f4f91f93f4..ff67129c94 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml @@ -20,9 +20,11 @@ properties: - tianma,tm041xdhg01 - const: ilitek,ili9805 + reg: + maxItems: 1 + avdd-supply: true dvdd-supply: true - reg: true required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index b1e624be3e..baf5dfe5f5 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -19,13 +19,16 @@ properties: - ampire,am8001280g - bananapi,lhr050h41 - feixin,k101-im2byl02 + - startek,kd050hdfia020 - tdo,tl050hdv35 - wanchanglong,w552946aba - const: ilitek,ili9881c + reg: + maxItems: 1 + backlight: true power-supply: true - reg: true reset-gpios: true rotation: true diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml index 72788e3e6c..c7df9a7f65 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml +++ b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml @@ -17,10 +17,12 @@ properties: compatible: const: innolux,ej030na + reg: + maxItems: 1 + backlight: true port: true power-supply: true - reg: true reset-gpios: true required: diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml index 5a5f071627..4164e3f706 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml +++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml @@ -16,9 +16,11 @@ properties: compatible: const: innolux,p097pfg + reg: + maxItems: 1 + backlight: true enable-gpios: true - reg: true avdd-supply: description: The regulator that provides positive voltage diff --git a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml index 41eb7fbf77..20afdb4568 100644 --- a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml +++ b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml @@ -21,7 +21,8 @@ properties: - radxa,display-8hd-ad002 - const: jadard,jd9365da-h3 - reg: true + reg: + maxItems: 1 vdd-supply: description: supply regulator for VDD, usually 3.3V diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml index 2f4d27a309..a862145900 100644 --- a/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml +++ b/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml @@ -26,7 +26,9 @@ properties: compatible: const: jdi,lpm102a188a - reg: true + reg: + maxItems: 1 + enable-gpios: true reset-gpios: true power-supply: true diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml index 63c82a4378..0c8b5cb78b 100644 --- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml @@ -16,8 +16,10 @@ properties: compatible: const: jdi,lt070me05000 + reg: + maxItems: 1 + enable-gpios: true - reg: true reset-gpios: true vddp-supply: diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml index b4be9bd8dd..d86c916f7b 100644 --- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml +++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml @@ -17,10 +17,12 @@ properties: compatible: const: kingdisplay,kd035g6-54nt + reg: + maxItems: 1 + backlight: true port: true power-supply: true - reg: true reset-gpios: true spi-3wire: true diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml index 7a55961e1a..b5dc02b272 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml @@ -18,6 +18,9 @@ properties: compatible: const: leadtek,ltk035c5444t + reg: + maxItems: 1 + spi-3wire: true required: diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml index a40ab887ad..e2a2dd4ef5 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml @@ -18,7 +18,10 @@ properties: - leadtek,ltk050h3146w - leadtek,ltk050h3146w-a2 - leadtek,ltk050h3148w - reg: true + + reg: + maxItems: 1 + backlight: true reset-gpios: true iovcc-supply: diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml index d589f16772..af9e0ea0e7 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -17,7 +17,10 @@ properties: enum: - leadtek,ltk101b4029w - leadtek,ltk500hd1829 - reg: true + + reg: + maxItems: 1 + backlight: true reset-gpios: true iovcc-supply: diff --git a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml index ee357e139a..590ccc27d1 100644 --- a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml +++ b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml @@ -21,7 +21,8 @@ properties: compatible: const: lg,lg4573 - reg: true + reg: + maxItems: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml b/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml new file mode 100644 index 0000000000..1e08648f5b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/lg,sw43408.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LG SW43408 1080x2160 DSI panel + +maintainers: + - Caleb Connolly + +description: + This panel is used on the Pixel 3, it is a 60hz OLED panel which + required DSC (Display Stream Compression) and has rounded corners. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - const: lg,sw43408 + + reg: true + port: true + vddi-supply: true + vpnl-supply: true + reset-gpios: true + +required: + - compatible + - vddi-supply + - vpnl-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "lg,sw43408"; + reg = <0>; + + vddi-supply = <&vreg_l14a_1p88>; + vpnl-supply = <&vreg_l28a_3p0>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + port { + endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml index 628c4b8981..3de17fd851 100644 --- a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml +++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml @@ -17,6 +17,9 @@ properties: compatible: const: lgphilips,lb035q02 + reg: + maxItems: 1 + label: true enable-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml index accf933d6e..1cffe4d6d4 100644 --- a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml +++ b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml @@ -21,9 +21,11 @@ properties: compatible: const: nec,nl8048hl11 + reg: + maxItems: 1 + label: true port: true - reg: true reset-gpios: true spi-max-frequency: diff --git a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml index 7a634fbc46..d3a25a8fd7 100644 --- a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml +++ b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml @@ -24,7 +24,9 @@ properties: - powkiddy,rk2023-panel - const: newvision,nv3051d - reg: true + reg: + maxItems: 1 + backlight: true port: true reset-gpios: diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml index 91921f4b0e..bb50fd5506 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml @@ -24,7 +24,10 @@ properties: string determines how the NT35510 panel driver shall be configured to work with the indicated panel. The novatek,nt35510 compatible shall always be provided as a fallback. - reg: true + + reg: + maxItems: 1 + reset-gpios: true vdd-supply: description: regulator that supplies the vdd voltage diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml index 377a05d48a..a9e4049398 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml @@ -19,7 +19,7 @@ description: | either bilinear interpolation or pixel duplication. allOf: - - $ref: panel-common.yaml# + - $ref: panel-common-dual.yaml# properties: compatible: @@ -33,6 +33,9 @@ properties: to work with the indicated panel. The novatek,nt35950 compatible shall always be provided as a fallback. + reg: + maxItems: 1 + reset-gpios: maxItems: 1 description: phandle of gpio for reset line - This should be 8mA, gpio @@ -49,7 +52,6 @@ properties: backlight: true ports: true - reg: true required: - compatible @@ -59,6 +61,7 @@ required: - avee-supply - dvdd-supply - vddio-supply + - ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml index 5f7e4c4860..c4bae4f770 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml @@ -14,9 +14,6 @@ description: | panels. Support video mode panels from China Star Optoelectronics Technology (CSOT) and BOE Technology. -allOf: - - $ref: panel-common.yaml# - properties: compatible: oneOf: @@ -30,6 +27,9 @@ properties: - lenovo,j606f-boe-nt36523w - const: novatek,nt36523w + reg: + maxItems: 1 + reset-gpios: maxItems: 1 description: phandle of gpio for reset line - This should be 8mA @@ -37,8 +37,6 @@ properties: vddio-supply: description: regulator that supplies the I/O voltage - reg: true - ports: true rotation: true backlight: true @@ -47,7 +45,26 @@ required: - reg - vddio-supply - reset-gpios - - ports + +allOf: + - $ref: panel-common-dual.yaml# + - if: + properties: + compatible: + contains: + enum: + - novatek,nt36523w + then: + properties: + ports: + properties: + port@1: false + else: + properties: + port: false + ports: + required: + - port@1 unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml index ae821f465e..800a2f0a4d 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml @@ -29,6 +29,9 @@ properties: determines how the NT36672A panel driver is configured for the indicated panel. The novatek,nt36672a compatible shall always be provided as a fallback. + reg: + maxItems: 1 + reset-gpios: maxItems: 1 description: phandle of gpio for reset line - This should be 8mA, gpio @@ -44,7 +47,6 @@ properties: vddneg-supply: description: phandle of the negative boost supply regulator - reg: true port: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml index 72463795e4..e5d8785fdf 100644 --- a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml +++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml @@ -38,10 +38,12 @@ properties: compatible: const: olimex,lcd-olinuxino + reg: + maxItems: 1 + backlight: true enable-gpios: true power-supply: true - reg: true required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/panel-common-dual.yaml b/Documentation/devicetree/bindings/display/panel/panel-common-dual.yaml new file mode 100644 index 0000000000..cc7ea3c35c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-common-dual.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-common-dual.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Dual-Link Display Panels + +maintainers: + - Thierry Reding + - Laurent Pinchart + +description: + Properties common for Panel IC supporting dual link panels. Devices might + support also single link. + +allOf: + - $ref: panel-common.yaml# + +properties: + ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: First link + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Second link + + "#address-cells": true + "#size-cells": true + + required: + - port@0 + +# Single-panel setups are still allowed. +oneOf: + - required: + - ports + - required: + - port + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml index e808215cb3..d0ac31ab60 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -71,6 +71,9 @@ properties: - shineworld,lh133k - const: panel-mipi-dbi-spi + reg: + maxItems: 1 + write-only: type: boolean description: diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index f9160d7bac..db5acd2807 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -36,6 +36,8 @@ properties: - jdi,fhd-r63452 # Khadas TS050 5" 1080x1920 LCD panel - khadas,ts050 + # Khadas TS050 V2 5" 1080x1920 LCD panel + - khadas,ts050v2 # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel - kingdisplay,kd097d04 # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel @@ -50,6 +52,8 @@ properties: - panasonic,vvx10f004b00 # Panasonic 10" WUXGA TFT LCD panel - panasonic,vvx10f034n00 + # Samsung s6e3fa7 1080x2220 based AMS559NK06 AMOLED panel + - samsung,s6e3fa7-ams559nk06 # Samsung s6e3fc2x01 1080x2340 AMOLED panel - samsung,s6e3fc2x01 # Samsung sofef00 1080x2280 AMOLED panel diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index a95445f408..5067f5c0a2 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -91,6 +91,8 @@ properties: - boe,nv133fhm-n62 # BOE NV140FHM-N49 14.0" FHD a-Si FT panel - boe,nv140fhmn49 + # Crystal Clear Technology CMT430B19N00 4.3" 480x272 TFT-LCD panel + - cct,cmt430b19n00 # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel - cdtech,s043wq26h-ct7 # CDTech(H.K.) Electronics Limited 7" WSVGA (1024x600) TFT LCD Panel @@ -188,6 +190,8 @@ properties: - innolux,g121i1-l01 # Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel - innolux,g121x1-l03 + # Innolux Corporation 12.1" G121XCE-L01 XGA (1024x768) TFT LCD panel + - innolux,g121xce-l01 # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel - innolux,n116bca-ea1 # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel @@ -272,6 +276,8 @@ properties: - osddisplays,osd070t1718-19ts # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel - osddisplays,osd101t2045-53ts + # POWERTIP PH128800T006-ZHC01 10.1" WXGA TFT LCD panel + - powertip,ph128800t006-zhc01 # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel - powertip,ph800480t013-idf02 # QiaoDian XianShi Corporation 4"3 TFT LCD panel @@ -348,15 +354,6 @@ properties: # Yes Optoelectronics YTC700TLAG-05-201C 7" TFT LCD panel - yes-optoelectronics,ytc700tlag-05-201c - backlight: true - ddc-i2c-bus: true - enable-gpios: true - port: true - power-supply: true - no-hpd: true - hpd-gpios: true - data-mapping: true - if: not: properties: @@ -367,7 +364,7 @@ then: properties: data-mapping: false -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml index d62fd692bf..4825792bf7 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml @@ -16,7 +16,9 @@ properties: compatible: const: raydium,rm67191 - reg: true + reg: + maxItems: 1 + port: true reset-gpios: true width-mm: true diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml index f436ba6738..7ad223f982 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml @@ -22,6 +22,9 @@ properties: - const: fairphone,fp5-rm692e5-boe - const: raydium,rm692e5 + reg: + maxItems: 1 + dvdd-supply: description: Digital voltage rail @@ -31,7 +34,6 @@ properties: vddio-supply: description: I/O voltage rail - reg: true port: true required: diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm69380.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm69380.yaml new file mode 100644 index 0000000000..b17765b2b3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm69380.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/raydium,rm69380.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raydium RM69380-based DSI display panels + +maintainers: + - David Wronek + +description: + The Raydium RM69380 is a generic DSI panel IC used to control + OLED panels. + +allOf: + - $ref: panel-common-dual.yaml# + +properties: + compatible: + items: + - enum: + - lenovo,j716f-edo-rm69380 + - const: raydium,rm69380 + description: This indicates the panel manufacturer of the panel + that is in turn using the RM69380 panel driver. The compatible + string determines how the RM69380 panel driver shall be configured + to work with the indicated panel. The raydium,rm69380 compatible shall + always be provided as a fallback. + + avdd-supply: + description: Analog voltage rail + + vddio-supply: + description: I/O voltage rail + + reset-gpios: + maxItems: 1 + description: phandle of gpio for reset line - This should be active low + + reg: true + +required: + - compatible + - reg + - avdd-supply + - vddio-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "lenovo,j716f-edo-rm69380", "raydium,rm69380"; + reg = <0>; + + avdd-supply = <&panel_avdd_regulator>; + vddio-supply = <&vreg_l14a>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + panel_in_0: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + panel_in_1: endpoint { + remote-endpoint = <&mdss_dsi1_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml index 6ec471284f..4ae152cc55 100644 --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml @@ -22,6 +22,8 @@ properties: enum: # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel - anbernic,rg353v-panel-v2 + # GameForce Chi 3.5" 640x480 TFT LCD panel + - gameforce,chi-panel # Powkiddy RGB10MAX3 5.0" 720x1280 TFT LCD panel - powkiddy,rgb10max3-panel # Powkiddy RGB30 3.0" 720x720 TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml index 95ce22c678..04f86e0cba 100644 --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml @@ -14,7 +14,7 @@ properties: const: ronbo,rb070d30 reg: - description: MIPI-DSI virtual channel + maxItems: 1 power-gpios: description: GPIO used for the power pin diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml index ccc482570d..e8f9e9d06a 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml @@ -33,7 +33,9 @@ properties: # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel - samsung,s6e3hf2 - reg: true + reg: + maxItems: 1 + reset-gpios: true enable-gpios: true te-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml index 58fa073ce2..e081c84a93 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml @@ -11,12 +11,15 @@ maintainers: allOf: - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: compatible: const: samsung,ams495qa01 - reg: true + reg: + maxItems: 1 + reset-gpios: description: reset gpio, must be GPIO_ACTIVE_LOW elvdd-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml index c0fabeb386..bc92b16c95 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml @@ -17,9 +17,11 @@ properties: compatible: const: samsung,ld9040 + reg: + maxItems: 1 + display-timings: true port: true - reg: true reset-gpios: true vdd3-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml index 70ffc88d2a..7ce8540551 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml @@ -21,7 +21,8 @@ properties: compatible: const: samsung,lms380kf01 - reg: true + reg: + maxItems: 1 interrupts: description: provides an optional ESD (electrostatic discharge) diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml index 5e77cee93f..9363032883 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml @@ -20,7 +20,8 @@ properties: compatible: const: samsung,lms397kf04 - reg: true + reg: + maxItems: 1 reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml index 66d147496b..2af5bc4732 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml @@ -16,8 +16,10 @@ properties: compatible: const: samsung,s6d16d0 + reg: + maxItems: 1 + port: true - reg: true reset-gpios: true vdd1-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml index d273faf444..d749041647 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml @@ -20,7 +20,8 @@ properties: compatible: const: samsung,s6d27a1 - reg: true + reg: + maxItems: 1 interrupts: description: provides an optional ESD (electrostatic discharge) diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml index 45a236d2cc..939da65114 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml @@ -24,7 +24,8 @@ properties: - samsung,ltl101at01 - const: samsung,s6d7aa0 - reg: true + reg: + maxItems: 1 backlight: description: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml index 6f1fc7469f..c47e2a1a30 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml @@ -18,7 +18,9 @@ properties: compatible: const: samsung,s6e63m0 - reg: true + reg: + maxItems: 1 + reset-gpios: true port: true default-brightness: true diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml index b749e9e906..42634fc3b5 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: samsung,s6e88a0-ams452ef01 - reg: true + + reg: + maxItems: 1 + port: true reset-gpios: true vdd3-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml index 200fbf1c74..4601fa4606 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml @@ -16,7 +16,9 @@ properties: compatible: const: samsung,s6e8aa0 - reg: true + reg: + maxItems: 1 + reset-gpios: true display-timings: true diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml index 57b44a0e76..ce820b96a7 100644 --- a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml @@ -37,7 +37,9 @@ properties: - enum: - sharp,lq101r1sx01 - reg: true + reg: + maxItems: 1 + power-supply: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml index a90d0d8bf7..b6ea246430 100644 --- a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml +++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml @@ -16,7 +16,9 @@ properties: compatible: const: sharp,ls043t1le01-qhd - reg: true + reg: + maxItems: 1 + backlight: true reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml index 271c097cc9..77a4fce129 100644 --- a/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml +++ b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml @@ -16,7 +16,9 @@ properties: compatible: const: sharp,ls060t1sx01 - reg: true + reg: + maxItems: 1 + backlight: true reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml index ef162b51d0..0ce2ea1358 100644 --- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml @@ -21,7 +21,9 @@ properties: - jasonic,jt240mhqs-hwt-ek-e3 - sitronix,st7789v - reg: true + reg: + maxItems: 1 + reset-gpios: true power-supply: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml index 059cc6dbcf..fd778a20f7 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml @@ -22,7 +22,10 @@ properties: enum: - sony,acx424akp - sony,acx424akm - reg: true + + reg: + maxItems: 1 + reset-gpios: true vddi-supply: description: regulator that supplies the vddi voltage diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml index 98abdf4dde..5a8260224b 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml @@ -17,6 +17,9 @@ properties: compatible: const: sony,acx565akm + reg: + maxItems: 1 + label: true reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml index b6b885b4c2..191b692125 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml @@ -20,9 +20,12 @@ properties: compatible: const: sony,td4353-jdi-tama - reg: true + reg: + maxItems: 1 backlight: true + width-mm: true + height-mm: true vddio-supply: description: VDDIO 1.8V supply diff --git a/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml index 9679729395..a58a313497 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml @@ -21,7 +21,8 @@ properties: compatible: const: sony,tulip-truly-nt35521 - reg: true + reg: + maxItems: 1 positive5-supply: description: Positive 5V supply diff --git a/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml index e5617d1255..2fd6e0ec36 100644 --- a/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml +++ b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml @@ -19,15 +19,17 @@ properties: - sharp,ls068b3sx02 - const: syna,r63353 + reg: + maxItems: 1 + avdd-supply: true dvdd-supply: true - reg: true required: - compatible + - reg - avdd-supply - dvdd-supply - - reg - reset-gpios - port - backlight diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml index e8c8ee8d7c..7edd29df4b 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml +++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml @@ -22,7 +22,9 @@ properties: # Toppoly TD043MTEA1 Panel - tpo,td043mtea1 - reg: true + reg: + maxItems: 1 + label: true reset-gpios: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml index f0243d1961..59a373728e 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml +++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml @@ -52,7 +52,8 @@ properties: - const: tpo,tpg110 - const: tpo,tpg110 - reg: true + reg: + maxItems: 1 grestb-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml index 7723990675..30047a62fc 100644 --- a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml +++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml @@ -20,7 +20,8 @@ properties: compatible: const: visionox,rm69299-1080p-display - reg: true + reg: + maxItems: 1 vdda-supply: description: | diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml index c407deb6af..9c9743a235 100644 --- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: xinpeng,xpp055c272 - reg: true + + reg: + maxItems: 1 + backlight: true port: true reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml index af638b6c0d..2aac62219f 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml @@ -15,6 +15,7 @@ description: | allOf: - $ref: ../bridge/synopsys,dw-hdmi.yaml# + - $ref: /schemas/sound/dai-common.yaml# properties: compatible: @@ -124,6 +125,9 @@ properties: description: phandle to the GRF to mux vopl/vopb. + "#sound-dai-cells": + const: 0 + required: - compatible - reg @@ -153,6 +157,7 @@ examples: ddc-i2c-bus = <&i2c5>; power-domains = <&power RK3288_PD_VIO>; rockchip,grf = <&grf>; + #sound-dai-cells = <0>; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml index be78dcfa1c..5b87b0f196 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml @@ -37,6 +37,9 @@ properties: power-domains: maxItems: 1 + "#sound-dai-cells": + const: 0 + ports: $ref: /schemas/graph.yaml#/properties/ports @@ -66,6 +69,7 @@ required: - ports allOf: + - $ref: /schemas/sound/dai-common.yaml# - if: properties: compatible: @@ -106,6 +110,7 @@ examples: clock-names = "pclk"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_ctl>; + #sound-dai-cells = <0>; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml index 1a68a940d1..6d4b78a365 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml @@ -10,6 +10,9 @@ maintainers: - Sandy Huang - Heiko Stuebner +allOf: + - $ref: /schemas/sound/dai-common.yaml# + properties: compatible: const: rockchip,rk3066-hdmi @@ -34,6 +37,9 @@ properties: description: This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1. + "#sound-dai-cells": + const: 0 + ports: $ref: /schemas/graph.yaml#/properties/ports @@ -83,6 +89,7 @@ examples: pinctrl-names = "default"; power-domains = <&power RK3066_PD_VIO>; rockchip,grf = <&grf>; + #sound-dai-cells = <0>; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml new file mode 100644 index 0000000000..dda9097a79 --- /dev/null +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5-dp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5250/Exynos5420 SoC Display Port + +maintainers: + - Inki Dae + - Seung-Woo Kim + - Kyungmin Park + - Krzysztof Kozlowski + +properties: + compatible: + const: samsung,exynos5-dp + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: dp + + display-timings: + $ref: /schemas/display/panel/display-timings.yaml# + + interrupts: + maxItems: 1 + + hpd-gpios: + description: + Hotplug detect GPIO. + Indicates which GPIO should be used for hotplug detection + + phys: + maxItems: 1 + + phy-names: + items: + - const: dp + + power-domains: + maxItems: 1 + + interlaced: + type: boolean + deprecated: true + description: + Interlace scan mode. Progressive if defined, interlaced if not defined. + + vsync-active-high: + type: boolean + deprecated: true + description: + VSYNC polarity configuration. High if defined, low if not defined + + hsync-active-high: + type: boolean + deprecated: true + description: + HSYNC polarity configuration. High if defined, low if not defined + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a dp-connector node. + + required: + - port + + samsung,hpd-gpios: + maxItems: 1 + deprecated: true + + samsung,ycbcr-coeff: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_mode. + + samsung,dynamic-range: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_mode. + + samsung,color-space: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_info. + + samsung,color-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_info. + + samsung,link-rate: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can reading from monitor by dpcd method. + + samsung,lane-count: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can reading from monitor by dpcd method. + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - phys + - phy-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + dp-controller@145b0000 { + compatible = "samsung,exynos5-dp"; + reg = <0x145b0000 0x1000>; + clocks = <&clock CLK_DP>; + clock-names = "dp"; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + phys = <&dp_phy>; + phy-names = "dp"; + pinctrl-0 = <&dp_hpd>; + pinctrl-names = "default"; + power-domains = <&pd_disp1>; + + samsung,color-space = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; + + ports { + port { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml index 94c5242c03..3563378a01 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml @@ -177,6 +177,15 @@ allOf: required: - reg-names + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra194-host1x + then: + properties: + dma-coherent: true - if: properties: compatible: @@ -226,6 +235,8 @@ allOf: use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to usable stream IDs. + dma-coherent: true + required: - reg-names diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml index 83e77ee489..d54140f18d 100644 --- a/Documentation/devicetree/bindings/dma/fsl,edma.yaml +++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml @@ -21,8 +21,8 @@ properties: - enum: - fsl,vf610-edma - fsl,imx7ulp-edma - - fsl,imx8qm-adma - fsl,imx8qm-edma + - fsl,imx8ulp-edma - fsl,imx93-edma3 - fsl,imx93-edma4 - fsl,imx95-edma5 @@ -43,6 +43,17 @@ properties: maxItems: 64 "#dma-cells": + description: | + Specifies the number of cells needed to encode an DMA channel. + + Encode for cells number 2: + cell 0: index of dma channel mux instance. + cell 1: peripheral dma request id. + + Encode for cells number 3: + cell 0: peripheral dma request id. + cell 1: dma channel priority. + cell 2: bitmask, defined at include/dt-bindings/dma/fsl-edma.h enum: - 2 - 3 @@ -53,11 +64,18 @@ properties: clocks: minItems: 1 - maxItems: 2 + maxItems: 33 clock-names: minItems: 1 - maxItems: 2 + maxItems: 33 + + power-domains: + description: + The number of power domains matches the number of channels, arranged + in ascending order according to their associated DMA channels. + minItems: 1 + maxItems: 64 big-endian: description: | @@ -70,7 +88,6 @@ required: - compatible - reg - interrupts - - clocks - dma-channels allOf: @@ -80,7 +97,6 @@ allOf: compatible: contains: enum: - - fsl,imx8qm-adma - fsl,imx8qm-edma - fsl,imx93-edma3 - fsl,imx93-edma4 @@ -108,6 +124,7 @@ allOf: properties: clocks: minItems: 2 + maxItems: 2 clock-names: items: - const: dmamux0 @@ -136,6 +153,7 @@ allOf: properties: clock: minItems: 2 + maxItems: 2 clock-names: items: - const: dma @@ -151,6 +169,58 @@ allOf: dma-channels: const: 32 + - if: + properties: + compatible: + contains: + const: fsl,imx8ulp-edma + then: + properties: + clocks: + minItems: 33 + clock-names: + minItems: 33 + items: + oneOf: + - const: dma + - pattern: "^ch(0[0-9]|[1-2][0-9]|3[01])$" + + interrupt-names: false + interrupts: + minItems: 32 + "#dma-cells": + const: 3 + + - if: + properties: + compatible: + contains: + enum: + - fsl,vf610-edma + - fsl,imx7ulp-edma + - fsl,imx93-edma3 + - fsl,imx93-edma4 + - fsl,imx95-edma5 + - fsl,imx8ulp-edma + - fsl,ls1028a-edma + then: + required: + - clocks + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qm-adma + - fsl,imx8qm-edma + then: + required: + - power-domains + else: + properties: + power-domains: false + unevaluatedProperties: false examples: @@ -206,44 +276,27 @@ examples: - | #include - #include + #include - dma-controller@44000000 { - compatible = "fsl,imx93-edma3"; - reg = <0x44000000 0x200000>; + dma-controller@5a9f0000 { + compatible = "fsl,imx8qm-edma"; + reg = <0x5a9f0000 0x90000>; #dma-cells = <3>; - dma-channels = <31>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - clocks = <&clk IMX93_CLK_EDMA1_GATE>; - clock-names = "dma"; + dma-channels = <8>; + interrupts = , + , + , + , + , + , + , + ; + power-domains = <&pd IMX_SC_R_DMA_3_CH0>, + <&pd IMX_SC_R_DMA_3_CH1>, + <&pd IMX_SC_R_DMA_3_CH2>, + <&pd IMX_SC_R_DMA_3_CH3>, + <&pd IMX_SC_R_DMA_3_CH4>, + <&pd IMX_SC_R_DMA_3_CH5>, + <&pd IMX_SC_R_DMA_3_CH6>, + <&pd IMX_SC_R_DMA_3_CH7>; }; diff --git a/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml index 37135fa024..738b25b88b 100644 --- a/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml +++ b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml @@ -94,6 +94,7 @@ properties: - SAI: 24 - Multi SAI: 25 - HDMI Audio: 26 + - I2C: 27 The third cell: transfer priority ID enum: diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt deleted file mode 100644 index 1ae4748730..0000000000 --- a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt +++ /dev/null @@ -1,95 +0,0 @@ -Qualcomm Technologies HIDMA Management interface - -Qualcomm Technologies HIDMA is a high speed DMA device. It only supports -memcpy and memset capabilities. It has been designed for virtualized -environments. - -Each HIDMA HW instance consists of multiple DMA channels. These channels -share the same bandwidth. The bandwidth utilization can be partitioned -among channels based on the priority and weight assignments. - -There are only two priority levels and 15 weigh assignments possible. - -Other parameters here determine how much of the system bus this HIDMA -instance can use like maximum read/write request and number of bytes to -read/write in a single burst. - -Main node required properties: -- compatible: "qcom,hidma-mgmt-1.0"; -- reg: Address range for DMA device -- dma-channels: Number of channels supported by this DMA controller. -- max-write-burst-bytes: Maximum write burst in bytes that HIDMA can - occupy the bus for in a single transaction. A memcpy requested is - fragmented to multiples of this amount. This parameter is used while - writing into destination memory. Setting this value incorrectly can - starve other peripherals in the system. -- max-read-burst-bytes: Maximum read burst in bytes that HIDMA can - occupy the bus for in a single transaction. A memcpy request is - fragmented to multiples of this amount. This parameter is used while - reading the source memory. Setting this value incorrectly can starve - other peripherals in the system. -- max-write-transactions: This value is how many times a write burst is - applied back to back while writing to the destination before yielding - the bus. -- max-read-transactions: This value is how many times a read burst is - applied back to back while reading the source before yielding the bus. -- channel-reset-timeout-cycles: Channel reset timeout in cycles for this SOC. - Once a reset is applied to the HW, HW starts a timer for reset operation - to confirm. If reset is not completed within this time, HW reports reset - failure. - -Sub-nodes: - -HIDMA has one or more DMA channels that are used to move data from one -memory location to another. - -When the OS is not in control of the management interface (i.e. it's a guest), -the channel nodes appear on their own, not under a management node. - -Required properties: -- compatible: must contain "qcom,hidma-1.0" for initial HW or - "qcom,hidma-1.1"/"qcom,hidma-1.2" for MSI capable HW. -- reg: Addresses for the transfer and event channel -- interrupts: Should contain the event interrupt -- desc-count: Number of asynchronous requests this channel can handle -- iommus: required a iommu node - -Optional properties for MSI: -- msi-parent : See the generic MSI binding described in - devicetree/bindings/interrupt-controller/msi.txt for a description of the - msi-parent property. - -Example: - -Hypervisor OS configuration: - - hidma-mgmt@f9984000 = { - compatible = "qcom,hidma-mgmt-1.0"; - reg = <0xf9984000 0x15000>; - dma-channels = <6>; - max-write-burst-bytes = <1024>; - max-read-burst-bytes = <1024>; - max-write-transactions = <31>; - max-read-transactions = <31>; - channel-reset-timeout-cycles = <0x500>; - - hidma_24: dma-controller@5c050000 { - compatible = "qcom,hidma-1.0"; - reg = <0 0x5c050000 0x0 0x1000>, - <0 0x5c0b0000 0x0 0x1000>; - interrupts = <0 389 0>; - desc-count = <10>; - iommus = <&system_mmu>; - }; - }; - -Guest OS configuration: - - hidma_24: dma-controller@5c050000 { - compatible = "qcom,hidma-1.0"; - reg = <0 0x5c050000 0x0 0x1000>, - <0 0x5c0b0000 0x0 0x1000>; - interrupts = <0 389 0>; - desc-count = <10>; - iommus = <&system_mmu>; - }; diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml index 5da8291a7d..c21a4f073f 100644 --- a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml +++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml @@ -93,10 +93,10 @@ properties: data-width: $ref: /schemas/types.yaml#/definitions/uint32-array description: Data bus width per each DMA master in bytes. + minItems: 1 + maxItems: 4 items: - maxItems: 4 - items: - enum: [4, 8, 16, 32] + enum: [4, 8, 16, 32] data_width: $ref: /schemas/types.yaml#/definitions/uint32-array @@ -106,28 +106,28 @@ properties: deprecated. It' usage is discouraged in favor of data-width one. Moreover the property incorrectly permits to define data-bus width of 8 and 16 bits, which is impossible in accordance with DW DMAC IP-core data book. + minItems: 1 + maxItems: 4 items: - maxItems: 4 - items: - enum: - - 0 # 8 bits - - 1 # 16 bits - - 2 # 32 bits - - 3 # 64 bits - - 4 # 128 bits - - 5 # 256 bits - default: 0 + enum: + - 0 # 8 bits + - 1 # 16 bits + - 2 # 32 bits + - 3 # 64 bits + - 4 # 128 bits + - 5 # 256 bits + default: 0 multi-block: $ref: /schemas/types.yaml#/definitions/uint32-array description: | LLP-based multi-block transfer supported by hardware per each DMA channel. + minItems: 1 + maxItems: 8 items: - maxItems: 8 - items: - enum: [0, 1] - default: 1 + enum: [0, 1] + default: 1 snps,max-burst-len: $ref: /schemas/types.yaml#/definitions/uint32-array @@ -138,11 +138,11 @@ properties: will be from 1 to max-burst-len words. It's an array property with one cell per channel in the units determined by the value set in the CTLx.SRC_TR_WIDTH/CTLx.DST_TR_WIDTH fields (data width). + minItems: 1 + maxItems: 8 items: - maxItems: 8 - items: - enum: [4, 8, 16, 32, 64, 128, 256] - default: 256 + enum: [4, 8, 16, 32, 64, 128, 256] + default: 256 snps,dma-protection-control: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml index 363cf8bd15..525f5f3932 100644 --- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml @@ -21,6 +21,7 @@ properties: - snps,axi-dma-1.01a - intel,kmb-axi-dma - starfive,jh7110-axi-dma + - starfive,jh8100-axi-dma reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml index 329847ef09..ff935a0068 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml +++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml @@ -82,6 +82,10 @@ properties: description: if defined, it indicates that the controller supports memory-to-memory transfer + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml index e722fbcd8a..ddf82bf1e7 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml +++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml @@ -28,6 +28,10 @@ properties: resets: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml index 4591523b51..7de2c29606 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -247,6 +247,37 @@ properties: reg: const: 0x18 + protocol@19: + type: object + allOf: + - $ref: '#/$defs/protocol-node' + - $ref: /schemas/pinctrl/pinctrl.yaml + + unevaluatedProperties: false + + properties: + reg: + const: 0x19 + + patternProperties: + '-pins$': + type: object + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + unevaluatedProperties: false + + description: + A pin multiplexing sub-node describes how to configure a + set of pins in some desired function. + A single sub-node may define several pin configurations. + This sub-node is using the default pinctrl bindings to configure + pin multiplexing and using SCMI protocol to apply a specified + configuration. + + required: + - reg + additionalProperties: false $defs: @@ -355,7 +386,7 @@ examples: scmi_dvfs: protocol@13 { reg = <0x13>; - #clock-cells = <1>; + #power-domain-cells = <1>; mboxes = <&mhuB 1 0>, <&mhuB 1 1>; @@ -401,6 +432,25 @@ examples: scmi_powercap: protocol@18 { reg = <0x18>; }; + + scmi_pinctrl: protocol@19 { + reg = <0x19>; + + i2c2-pins { + groups = "g_i2c2_a", "g_i2c2_b"; + function = "f_i2c2"; + }; + + mdio-pins { + groups = "g_avb_mdio"; + drive-strength = <24>; + }; + + keys_pins: keys-pins { + pins = "gpio_5_17", "gpio_5_20", "gpio_5_22", "gpio_2_1"; + bias-pull-up; + }; + }; }; }; @@ -468,7 +518,7 @@ examples: reg = <0x13>; linaro,optee-channel-id = <1>; shmem = <&cpu_optee_lpri0>; - #clock-cells = <1>; + #power-domain-cells = <1>; }; scmi_clk0: protocol@14 { diff --git a/Documentation/devicetree/bindings/fpga/xlnx,fpga-selectmap.yaml b/Documentation/devicetree/bindings/fpga/xlnx,fpga-selectmap.yaml new file mode 100644 index 0000000000..05775746fd --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/xlnx,fpga-selectmap.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/xlnx,fpga-selectmap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx SelectMAP FPGA interface + +maintainers: + - Charles Perry + +description: | + Xilinx 7 Series FPGAs support a method of loading the bitstream over a + parallel port named the SelectMAP interface in the documentation. Only + the x8 mode is supported where data is loaded at one byte per rising edge of + the clock, with the MSB of each byte presented to the D0 pin. + + Datasheets: + https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf + +allOf: + - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# + +properties: + compatible: + enum: + - xlnx,fpga-xc7s-selectmap + - xlnx,fpga-xc7a-selectmap + - xlnx,fpga-xc7k-selectmap + - xlnx,fpga-xc7v-selectmap + + reg: + description: + At least 1 byte of memory mapped IO + maxItems: 1 + + prog-gpios: + description: + config pin (referred to as PROGRAM_B in the manual) + maxItems: 1 + + done-gpios: + description: + config status pin (referred to as DONE in the manual) + maxItems: 1 + + init-gpios: + description: + initialization status and configuration error pin + (referred to as INIT_B in the manual) + maxItems: 1 + + csi-gpios: + description: + chip select pin (referred to as CSI_B in the manual) + Optional gpio for if the bus controller does not provide a chip select. + maxItems: 1 + + rdwr-gpios: + description: + read/write select pin (referred to as RDWR_B in the manual) + Optional gpio for if the bus controller does not provide this pin. + maxItems: 1 + +required: + - compatible + - reg + - prog-gpios + - done-gpios + - init-gpios + +unevaluatedProperties: false + +examples: + - | + #include + fpga-mgr@8000000 { + compatible = "xlnx,fpga-xc7s-selectmap"; + reg = <0x8000000 0x4>; + prog-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; + init-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + done-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + csi-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + rdwr-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; + }; +... diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml index a1e71c974e..f096f286da 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml @@ -62,6 +62,8 @@ properties: interrupt-controller: true + gpio-ranges: true + wakeup-source: type: boolean description: > @@ -88,6 +90,7 @@ examples: interrupt-parent = <&irq0_intc>; interrupts = <0x6>; brcm,gpio-bank-widths = <32 32 32 24>; + gpio-ranges = <&pinctrl 0 0 120>; }; upg_gio_aon: gpio@f04172c0 { diff --git a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml index d481e78958..d61569b3f1 100644 --- a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml @@ -14,6 +14,7 @@ properties: items: - enum: - microchip,mpfs-gpio + - microchip,coregpio-rtl-v3 reg: maxItems: 1 @@ -43,6 +44,7 @@ properties: default: 32 gpio-controller: true + gpio-line-names: true patternProperties: "^.+-hog(-[0-9]+)?$": @@ -62,12 +64,21 @@ patternProperties: - gpio-hog - gpios +allOf: + - if: + properties: + compatible: + contains: + const: microchip,mpfs-gpio + then: + required: + - interrupts + - "#interrupt-cells" + - interrupt-controller + required: - compatible - reg - - interrupts - - "#interrupt-cells" - - interrupt-controller - "#gpio-cells" - gpio-controller - clocks diff --git a/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt b/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt deleted file mode 100644 index ce97265e23..0000000000 --- a/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt +++ /dev/null @@ -1,30 +0,0 @@ -Raspberry Pi GPIO expander - -The Raspberry Pi 3 GPIO expander is controlled by the VC4 firmware. The -firmware exposes a mailbox interface that allows the ARM core to control the -GPIO lines on the expander. - -The Raspberry Pi GPIO expander node must be a child node of the Raspberry Pi -firmware node. - -Required properties: - -- compatible : Should be "raspberrypi,firmware-gpio" -- gpio-controller : Marks the device node as a gpio controller -- #gpio-cells : Should be two. The first cell is the pin number, and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - -Example: - -firmware: firmware-rpi { - compatible = "raspberrypi,bcm2835-firmware"; - mboxes = <&mailbox>; - - expgpio: gpio { - compatible = "raspberrypi,firmware-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; -}; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml new file mode 100644 index 0000000000..a5b4e00217 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml @@ -0,0 +1,147 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/arm,mali-valhall-csf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Mali Valhall GPU + +maintainers: + - Liviu Dudau + - Boris Brezillon + +properties: + $nodename: + pattern: '^gpu@[a-f0-9]+$' + + compatible: + oneOf: + - items: + - enum: + - rockchip,rk3588-mali + - const: arm,mali-valhall-csf # Mali Valhall GPU model/revision is fully discoverable + + reg: + maxItems: 1 + + interrupts: + items: + - description: Job interrupt + - description: MMU interrupt + - description: GPU interrupt + + interrupt-names: + items: + - const: job + - const: mmu + - const: gpu + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + items: + - const: core + - const: coregroup + - const: stacks + + mali-supply: true + + operating-points-v2: true + opp-table: + type: object + + power-domains: + minItems: 1 + maxItems: 5 + + power-domain-names: + minItems: 1 + maxItems: 5 + + sram-supply: true + + "#cooling-cells": + const: 2 + + dynamic-power-coefficient: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + A u32 value that represents the running time dynamic + power coefficient in units of uW/MHz/V^2. The + coefficient can either be calculated from power + measurements or derived by analysis. + + The dynamic power consumption of the GPU is + proportional to the square of the Voltage (V) and + the clock frequency (f). The coefficient is used to + calculate the dynamic power as below - + + Pdyn = dynamic-power-coefficient * V^2 * f + + where voltage is in V, frequency is in MHz. + + dma-coherent: true + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - mali-supply + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,rk3588-mali + then: + properties: + clocks: + minItems: 3 + power-domains: + maxItems: 1 + power-domain-names: false + +examples: + - | + #include + #include + #include + #include + + gpu: gpu@fb000000 { + compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf"; + reg = <0xfb000000 0x200000>; + interrupts = , + , + ; + interrupt-names = "job", "mmu", "gpu"; + clock-names = "core", "coregroup", "stacks"; + clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>, + <&cru CLK_GPU_STACKS>; + power-domains = <&power RK3588_PD_GPU>; + operating-points-v2 = <&gpu_opp_table>; + mali-supply = <&vdd_gpu_s0>; + sram-supply = <&vdd_gpu_mem_s0>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <675000 675000 850000>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/hwmon/adc128d818.txt b/Documentation/devicetree/bindings/hwmon/adc128d818.txt deleted file mode 100644 index d0ae46d7ba..0000000000 --- a/Documentation/devicetree/bindings/hwmon/adc128d818.txt +++ /dev/null @@ -1,38 +0,0 @@ -TI ADC128D818 ADC System Monitor With Temperature Sensor --------------------------------------------------------- - -Operation modes: - - - Mode 0: 7 single-ended voltage readings (IN0-IN6), - 1 temperature reading (internal) - - Mode 1: 8 single-ended voltage readings (IN0-IN7), - no temperature - - Mode 2: 4 pseudo-differential voltage readings - (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6), - 1 temperature reading (internal) - - Mode 3: 4 single-ended voltage readings (IN0-IN3), - 2 pseudo-differential voltage readings - (IN4-IN5, IN7-IN6), - 1 temperature reading (internal) - -If no operation mode is configured via device tree, the driver keeps the -currently active chip operation mode (default is mode 0). - - -Required node properties: - - - compatible: must be set to "ti,adc128d818" - - reg: I2C address of the device - -Optional node properties: - - - ti,mode: Operation mode (u8) (see above). - - -Example (operation mode 2): - - adc128d818@1d { - compatible = "ti,adc128d818"; - reg = <0x1d>; - ti,mode = /bits/ 8 <2>; - }; diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml index b680612949..5b076d6773 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml @@ -5,7 +5,7 @@ $id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors +title: Analog Devices ADM1075/ADM127x/ADM1281/ADM129x digital power monitors maintainers: - Krzysztof Kozlowski @@ -27,6 +27,7 @@ properties: - adi,adm1275 - adi,adm1276 - adi,adm1278 + - adi,adm1281 - adi,adm1293 - adi,adm1294 @@ -91,6 +92,7 @@ allOf: contains: enum: - adi,adm1278 + - adi,adm1281 - adi,adm1293 - adi,adm1294 then: diff --git a/Documentation/devicetree/bindings/hwmon/as370.txt b/Documentation/devicetree/bindings/hwmon/as370.txt deleted file mode 100644 index d102fe7651..0000000000 --- a/Documentation/devicetree/bindings/hwmon/as370.txt +++ /dev/null @@ -1,11 +0,0 @@ -Bindings for Synaptics AS370 PVT sensors - -Required properties: -- compatible : "syna,as370-hwmon" -- reg : address and length of the register set. - -Example: - hwmon@ea0810 { - compatible = "syna,as370-hwmon"; - reg = <0xea0810 0xc>; - }; diff --git a/Documentation/devicetree/bindings/hwmon/ibm,opal-sensor.yaml b/Documentation/devicetree/bindings/hwmon/ibm,opal-sensor.yaml new file mode 100644 index 0000000000..376ee7f1cd --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ibm,opal-sensor.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ibm,opal-sensor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM POWERNV platform sensors + +maintainers: + - Javier Carrasco + +properties: + compatible: + enum: + - ibm,opal-sensor-cooling-fan + - ibm,opal-sensor-amb-temp + - ibm,opal-sensor-power-supply + - ibm,opal-sensor-power + + sensor-id: + description: + An opaque id provided by the firmware to the kernel, identifies a + given sensor and its attribute data. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - sensor-id + +additionalProperties: false + +examples: + - | + sensor { + compatible = "ibm,opal-sensor-cooling-fan"; + sensor-id = <0x7052107>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt b/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt deleted file mode 100644 index 5dc5d2e257..0000000000 --- a/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt +++ /dev/null @@ -1,25 +0,0 @@ -Device-tree bindings for I2C-based On-Chip Controller hwmon device ------------------------------------------------------------------- - -Required properties: - - compatible = "ibm,p8-occ-hwmon"; - - reg = ; : I2C bus address - -Examples: - - i2c-bus@100 { - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <100000>; - < more properties > - - occ-hwmon@1 { - compatible = "ibm,p8-occ-hwmon"; - reg = <0x50>; - }; - - occ-hwmon@2 { - compatible = "ibm,p8-occ-hwmon"; - reg = <0x51>; - }; - }; diff --git a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt deleted file mode 100644 index f93242be60..0000000000 --- a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt +++ /dev/null @@ -1,23 +0,0 @@ -IBM POWERNV platform sensors ----------------------------- - -Required node properties: -- compatible: must be one of - "ibm,opal-sensor-cooling-fan" - "ibm,opal-sensor-amb-temp" - "ibm,opal-sensor-power-supply" - "ibm,opal-sensor-power" -- sensor-id: an opaque id provided by the firmware to the kernel, identifies a - given sensor and its attribute data - -Example sensors node: - -cooling-fan#8-data { - sensor-id = <0x7052107>; - compatible = "ibm,opal-sensor-cooling-fan"; -}; - -amb-temp#1-thrs { - sensor-id = <0x5096000>; - compatible = "ibm,opal-sensor-amb-temp"; -}; diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt deleted file mode 100644 index 758ff398b6..0000000000 --- a/Documentation/devicetree/bindings/hwmon/lm87.txt +++ /dev/null @@ -1,30 +0,0 @@ -*LM87 hwmon sensor. - -Required properties: -- compatible: Should be - "ti,lm87" - -- reg: I2C address - -optional properties: -- has-temp3: This configures pins 18 and 19 to be used as a second - remote temperature sensing channel. By default the pins - are configured as voltage input pins in0 and in5. - -- has-in6: When set, pin 5 is configured to be used as voltage input - in6. Otherwise the pin is set as FAN1 input. - -- has-in7: When set, pin 6 is configured to be used as voltage input - in7. Otherwise the pin is set as FAN2 input. - -- vcc-supply: a Phandle for the regulator supplying power, can be - configured to measure 5.0V power supply. Default is 3.3V. - -Example: - -lm87@2e { - compatible = "ti,lm87"; - reg = <0x2e>; - has-temp3; - vcc-supply = <®_5v0>; -}; diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt deleted file mode 100644 index f6bd87d8e2..0000000000 --- a/Documentation/devicetree/bindings/hwmon/max6650.txt +++ /dev/null @@ -1,28 +0,0 @@ -Bindings for MAX6651 and MAX6650 I2C fan controllers - -Reference: -[1] https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf - -Required properties: -- compatible : One of "maxim,max6650" or "maxim,max6651" -- reg : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48. - -Optional properties, default is to retain the chip's current setting: -- maxim,fan-microvolt : The supply voltage of the fan, either 5000000 uV or - 12000000 uV. -- maxim,fan-prescale : Pre-scaling value, as per datasheet [1]. Lower values - allow more fine-grained control of slower fans. - Valid: 1, 2, 4, 8, 16. -- maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the - driver selects closed-loop mode and the requested speed. - This ensures the fan is already running before userspace - takes over. - -Example: - fan-max6650: max6650@1b { - reg = <0x1b>; - compatible = "maxim,max6650"; - maxim,fan-microvolt = <12000000>; - maxim,fan-prescale = <4>; - maxim,fan-target-rpm = <1200>; - }; diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml new file mode 100644 index 0000000000..2c26104a5e --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/maxim,max6650.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX6650 and MAX6651 I2C Fan Controllers + +maintainers: + - Javier Carrasco + +description: | + The MAX6650 and MAX6651 regulate and monitor the speed + of 5VDC/12VDC burshless fans with built-in tachometers. + + Datasheets: + https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf + +properties: + compatible: + enum: + - maxim,max6650 + - maxim,max6651 + + reg: + maxItems: 1 + + maxim,fan-microvolt: + description: + The supply voltage of the fan, either 5000000 uV or + 12000000 uV. + enum: [5000000, 12000000] + + maxim,fan-prescale: + description: + Pre-scaling value, as per datasheet. Lower values + allow more fine-grained control of slower fans. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16] + + maxim,fan-target-rpm: + description: + Initial requested fan rotation speed. If specified, the + driver selects closed-loop mode and the requested speed. + This ensures the fan is already running before userspace + takes over. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 30000 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + fan-controller@1b { + compatible = "maxim,max6650"; + reg = <0x1b>; + maxim,fan-microvolt = <12000000>; + maxim,fan-prescale = <4>; + maxim,fan-target-rpm = <1200>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml new file mode 100644 index 0000000000..10c2204bc3 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/pmbus/adi,adp1050.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADP1050 digital controller with PMBus interface + +maintainers: + - Radu Sabau + +description: | + The ADP1050 is used to monitor system voltages, currents and temperatures. + Through the PMBus interface, the ADP1050 targets isolated power supplies + and has four individual monitors for input/output voltage, input current + and temperature. + Datasheet: + https://www.analog.com/en/products/adp1050.html + +properties: + compatible: + const: adi,adp1050 + + reg: + maxItems: 1 + + vcc-supply: true + +required: + - compatible + - reg + - vcc-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + + hwmon@70 { + compatible = "adi,adp1050"; + reg = <0x70>; + vcc-supply = <&vcc>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt deleted file mode 100644 index 48886f0ce4..0000000000 --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt +++ /dev/null @@ -1 +0,0 @@ -This file has moved to pwm-fan.yaml. diff --git a/Documentation/devicetree/bindings/hwmon/st,stts751.yaml b/Documentation/devicetree/bindings/hwmon/st,stts751.yaml new file mode 100644 index 0000000000..9c825adbed --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/st,stts751.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/st,stts751.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STTS751 Thermometer + +maintainers: + - Javier Carrasco + +properties: + compatible: + const: st,stts751 + + reg: + maxItems: 1 + + smbus-timeout-disable: + description: + When set, the smbus timeout function will be disabled. + $ref: /schemas/types.yaml#/definitions/flag + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + thermometer@48 { + compatible = "st,stts751"; + reg = <0x48>; + smbus-timeout-disable; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/stts751.txt b/Documentation/devicetree/bindings/hwmon/stts751.txt deleted file mode 100644 index 3ee1dc30e7..0000000000 --- a/Documentation/devicetree/bindings/hwmon/stts751.txt +++ /dev/null @@ -1,15 +0,0 @@ -* STTS751 thermometer. - -Required node properties: -- compatible: "stts751" -- reg: I2C bus address of the device - -Optional properties: -- smbus-timeout-disable: when set, the smbus timeout function will be disabled - -Example stts751 node: - -temp-sensor { - compatible = "stts751"; - reg = <0x48>; -} diff --git a/Documentation/devicetree/bindings/hwmon/syna,as370.yaml b/Documentation/devicetree/bindings/hwmon/syna,as370.yaml new file mode 100644 index 0000000000..1f7005f552 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/syna,as370.yaml @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/syna,as370.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synaptics AS370 PVT sensors + +maintainers: + - Javier Carrasco + +properties: + compatible: + const: syna,as370-hwmon + + reg: + description: + Address and length of the register set. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + sensor@ea0810 { + compatible = "syna,as370-hwmon"; + reg = <0xea0810 0xc>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml b/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml new file mode 100644 index 0000000000..a32035409c --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/ti,adc128d818.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADC128D818 ADC System Monitor With Temperature Sensor + +maintainers: + - Javier Carrasco + +description: | + The ADC128D818 is a 12-Bit, 8-Channel Analog to Digital Converter (ADC) + with a temperature sensor and an I2C interface. + + Datasheets: + https://www.ti.com/product/ADC128D818 + +properties: + compatible: + const: ti,adc128d818 + + reg: + maxItems: 1 + + ti,mode: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + Operation mode. + Mode 0 - 7 single-ended voltage readings (IN0-IN6), 1 temperature + reading (internal). + Mode 1 - 8 single-ended voltage readings (IN0-IN7), no temperature. + Mode 2 - 4 pseudo-differential voltage readings + (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6), 1 temperature reading (internal). + Mode 3 - 4 single-ended voltage readings (IN0-IN3), 2 pseudo-differential + voltage readings (IN4-IN5, IN7-IN6), 1 temperature reading (internal). + default: 0 + + vref-supply: + description: + The regulator to use as an external reference. If it does not exist, the + internal reference will be used. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@1d { + compatible = "ti,adc128d818"; + reg = <0x1d>; + vref-supply = <&vref>; + ti,mode = /bits/ 8 <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml b/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml new file mode 100644 index 0000000000..f553235a73 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/ti,lm87.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments LM87 Hardware Monitor + +maintainers: + - Javier Carrasco + +description: | + The LM87 is a serial interface system hardware monitor + with remote diode temperature sensing. + + Datasheets: + https://www.ti.com/product/LM87 + +properties: + compatible: + const: ti,lm87 + + reg: + maxItems: 1 + + has-temp3: + $ref: /schemas/types.yaml#/definitions/flag + description: + This configures pins 18 and 19 to be used as a second + remote temperature sensing channel. By default the pins + are configured as voltage input pins in0 and in5. + + has-in6: + $ref: /schemas/types.yaml#/definitions/flag + description: + When set, pin 5 is configured to be used as voltage input + in6. Otherwise the pin is set as FAN1 input. + + has-in7: + $ref: /schemas/types.yaml#/definitions/flag + description: + When set, pin 6 is configured to be used as voltage input + in7. Otherwise the pin is set as FAN2 input. + + vcc-supply: + description: + Regulator supplying power, can be configured to measure + 5.0V power supply. Default is 3.3V. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hwmon@2e { + compatible = "ti,lm87"; + reg = <0x2e>; + has-temp3; + vcc-supply = <®_5v0>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-pnx.txt b/Documentation/devicetree/bindings/i2c/i2c-pnx.txt deleted file mode 100644 index 2a59006cf7..0000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-pnx.txt +++ /dev/null @@ -1,34 +0,0 @@ -* NXP PNX I2C Controller - -Required properties: - - - reg: Offset and length of the register set for the device - - compatible: should be "nxp,pnx-i2c" - - interrupts: configure one interrupt line - - #address-cells: always 1 (for i2c addresses) - - #size-cells: always 0 - -Optional properties: - - - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz - -Examples: - - i2c1: i2c@400a0000 { - compatible = "nxp,pnx-i2c"; - reg = <0x400a0000 0x100>; - interrupt-parent = <&mic>; - interrupts = <51 0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c2: i2c@400a8000 { - compatible = "nxp,pnx-i2c"; - reg = <0x400a8000 0x100>; - interrupt-parent = <&mic>; - interrupts = <50 0>; - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <100000>; - }; diff --git a/Documentation/devicetree/bindings/i2c/nxp,pnx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nxp,pnx-i2c.yaml new file mode 100644 index 0000000000..798a6939b8 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/nxp,pnx-i2c.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/nxp,pnx-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PNX I2C Controller + +maintainers: + - Animesh Agarwal + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: nxp,pnx-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-frequency: + default: 100000 + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + i2c@400a0000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400a0000 0x100>; + interrupt-parent = <&mic>; + interrupts = <51 0>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml index f0eabff863..daf4e71b8e 100644 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml @@ -26,6 +26,7 @@ properties: - items: - enum: - qcom,sc7280-cci + - qcom,sc8280xp-cci - qcom,sdm845-cci - qcom,sm6350-cci - qcom,sm8250-cci @@ -176,6 +177,24 @@ allOf: - const: cci - const: cci_src + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8280xp-cci + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: camnoc_axi + - const: slow_ahb_src + - const: cpas_ahb + - const: cci + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml index 2291a7cd61..91ecf17b7a 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml +++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml @@ -15,14 +15,17 @@ allOf: properties: compatible: - items: - - enum: - - renesas,riic-r7s72100 # RZ/A1H - - renesas,riic-r7s9210 # RZ/A2M - - renesas,riic-r9a07g043 # RZ/G2UL and RZ/Five - - renesas,riic-r9a07g044 # RZ/G2{L,LC} - - renesas,riic-r9a07g054 # RZ/V2L - - const: renesas,riic-rz # RZ/A or RZ/G2L + oneOf: + - items: + - enum: + - renesas,riic-r7s72100 # RZ/A1H + - renesas,riic-r7s9210 # RZ/A2M + - renesas,riic-r9a07g043 # RZ/G2UL and RZ/Five + - renesas,riic-r9a07g044 # RZ/G2{L,LC} + - renesas,riic-r9a07g054 # RZ/V2L + - const: renesas,riic-rz # RZ/A or RZ/G2L + + - const: renesas,riic-r9a09g057 # RZ/V2H(P) reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml index 1b31b87c18..8fd8be7687 100644 --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -127,6 +127,10 @@ properties: wakeup-source: true + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml index 07cacc3f6a..280ed479ef 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -32,6 +32,8 @@ properties: spi-cpol: true + spi-3wire: true + interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml new file mode 100644 index 0000000000..ea6cfcd0af --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml @@ -0,0 +1,279 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7173.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7173 ADC + +maintainers: + - Ceclan Dumitru + +description: | + Analog Devices AD717x ADC's: + The AD717x family offer a complete integrated Sigma-Delta ADC solution which + can be used in high precision, low noise single channel applications + (Life Science measurements) or higher speed multiplexed applications + (Factory Automation PLC Input modules). The Sigma-Delta ADC is intended + primarily for measurement of signals close to DC but also delivers + outstanding performance with input bandwidths out to ~10kHz. + + Datasheets for supported chips: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-4.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-2.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-8.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7176-2.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7177-2.pdf + +properties: + compatible: + enum: + - adi,ad7172-2 + - adi,ad7172-4 + - adi,ad7173-8 + - adi,ad7175-2 + - adi,ad7175-8 + - adi,ad7176-2 + - adi,ad7177-2 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: | + Ready: multiplexed with SPI data out. While SPI CS is low, + can be used to indicate the completion of a conversion. + + - description: | + Error: The three error bits in the status register (ADC_ERROR, CRC_ERROR, + and REG_ERROR) are OR'ed, inverted, and mapped to the ERROR pin. + Therefore, the ERROR pin indicates that an error has occurred. + + interrupt-names: + minItems: 1 + items: + - const: rdy + - const: err + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + spi-max-frequency: + maximum: 20000000 + + gpio-controller: + description: Marks the device node as a GPIO controller. + + '#gpio-cells': + const: 2 + description: + The first cell is the GPIO number and the second cell specifies + GPIO flags, as defined in . + + vref-supply: + description: | + Differential external reference supply used for conversion. The reference + voltage (Vref) specified here must be the voltage difference between the + REF+ and REF- pins: Vref = (REF+) - (REF-). + + vref2-supply: + description: | + Differential external reference supply used for conversion. The reference + voltage (Vref2) specified here must be the voltage difference between the + REF2+ and REF2- pins: Vref2 = (REF2+) - (REF2-). + + avdd-supply: + description: Avdd supply, can be used as reference for conversion. + This supply is referenced to AVSS, voltage specified here + represents (AVDD1 - AVSS). + + avdd2-supply: + description: Avdd2 supply, used as the input to the internal voltage regulator. + This supply is referenced to AVSS, voltage specified here + represents (AVDD2 - AVSS). + + iovdd-supply: + description: iovdd supply, used for the chip digital interface. + + clocks: + maxItems: 1 + description: | + Optional external clock source. Can include one clock source: external + clock or external crystal. + + clock-names: + enum: + - ext-clk + - xtal + + '#clock-cells': + const: 0 + +patternProperties: + "^channel@[0-9a-f]$": + type: object + $ref: adc.yaml + unevaluatedProperties: false + + properties: + reg: + minimum: 0 + maximum: 15 + + diff-channels: + items: + minimum: 0 + maximum: 31 + + adi,reference-select: + description: | + Select the reference source to use when converting on + the specific channel. Valid values are: + vref : REF+ /REF− + vref2 : REF2+ /REF2− + refout-avss: REFOUT/AVSS (Internal reference) + avdd : AVDD /AVSS + + External reference ref2 only available on ad7173-8 and ad7172-4. + Internal reference refout-avss not available on ad7172-4. + + If not specified, internal reference used (if available). + $ref: /schemas/types.yaml#/definitions/string + enum: + - vref + - vref2 + - refout-avss + - avdd + default: refout-avss + + required: + - reg + - diff-channels + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + + # Only ad7172-4, ad7173-8 and ad7175-8 support vref2 + # Other models have [0-3] channel registers + - if: + properties: + compatible: + not: + contains: + enum: + - adi,ad7172-4 + - adi,ad7173-8 + - adi,ad7175-8 + then: + properties: + vref2-supply: false + patternProperties: + "^channel@[0-9a-f]$": + properties: + adi,reference-select: + enum: + - vref + - refout-avss + - avdd + reg: + maximum: 3 + + # Model ad7172-4 does not support internal reference + - if: + properties: + compatible: + contains: + const: adi,ad7172-4 + then: + patternProperties: + "^channel@[0-9a-f]$": + properties: + reg: + maximum: 7 + adi,reference-select: + enum: + - vref + - vref2 + - avdd + required: + - adi,reference-select + + - if: + anyOf: + - required: [clock-names] + - required: [clocks] + then: + properties: + '#clock-cells': false + +unevaluatedProperties: false + +examples: + - | + #include + #include + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7173-8"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "rdy"; + interrupt-parent = <&gpio>; + spi-max-frequency = <5000000>; + gpio-controller; + #gpio-cells = <2>; + #clock-cells = <0>; + + vref-supply = <&dummy_regulator>; + + channel@0 { + reg = <0>; + bipolar; + diff-channels = <0 1>; + adi,reference-select = "vref"; + }; + + channel@1 { + reg = <1>; + diff-channels = <2 3>; + }; + + channel@2 { + reg = <2>; + bipolar; + diff-channels = <4 5>; + }; + + channel@3 { + reg = <3>; + bipolar; + diff-channels = <6 7>; + }; + + channel@4 { + reg = <4>; + diff-channels = <8 9>; + adi,reference-select = "avdd"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7944.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7944.yaml new file mode 100644 index 0000000000..d17d184842 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7944.yaml @@ -0,0 +1,213 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7944.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices PulSAR LFCSP Analog to Digital Converters + +maintainers: + - Michael Hennerich + - Nuno Sá + +description: | + A family of pin-compatible single channel differential analog to digital + converters with SPI support in a LFCSP package. + + * https://www.analog.com/en/products/ad7944.html + * https://www.analog.com/en/products/ad7985.html + * https://www.analog.com/en/products/ad7986.html + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - adi,ad7944 + - adi,ad7985 + - adi,ad7986 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 111111111 + + spi-cpol: true + spi-cpha: true + + adi,spi-mode: + $ref: /schemas/types.yaml#/definitions/string + enum: [ single, chain ] + description: | + This property indicates the SPI wiring configuration. + + When this property is omitted, it is assumed that the device is using what + the datasheet calls "4-wire mode". This is the conventional SPI mode used + when there are multiple devices on the same bus. In this mode, the CNV + line is used to initiate the conversion and the SDI line is connected to + CS on the SPI controller. + + When this property is present, it indicates that the device is using one + of the following alternative wiring configurations: + + * single: The datasheet calls this "3-wire mode". (NOTE: The datasheet's + definition of 3-wire mode is NOT at all related to the standard + spi-3wire property!) This mode is often used when the ADC is the only + device on the bus. In this mode, SDI is tied to VIO, and the CNV line + can be connected to the CS line of the SPI controller or to a GPIO, in + which case the CS line of the controller is unused. + * chain: The datasheet calls this "chain mode". This mode is used to save + on wiring when multiple ADCs are used. In this mode, the SDI line of + one chip is tied to the SDO of the next chip in the chain and the SDI of + the last chip in the chain is tied to GND. Only the first chip in the + chain is connected to the SPI bus. The CNV line of all chips are tied + together. The CS line of the SPI controller can be used as the CNV line + only if it is active high. + + '#daisy-chained-devices': true + + avdd-supply: + description: A 2.5V supply that powers the analog circuitry. + + dvdd-supply: + description: A 2.5V supply that powers the digital circuitry. + + vio-supply: + description: + A 1.8V to 2.7V supply for the digital inputs and outputs. + + bvdd-supply: + description: + A voltage supply for the buffered power. When using an external reference + without an internal buffer (PDREF high, REFIN low), this should be + connected to the same supply as ref-supply. Otherwise, when using an + internal reference or an external reference with an internal buffer, this + is connected to a 5V supply. + + ref-supply: + description: + Voltage regulator for the external reference voltage (REF). This property + is omitted when using an internal reference. + + refin-supply: + description: + Voltage regulator for the reference buffer input (REFIN). When using an + external buffer with internal reference, this should be connected to a + 1.2V external reference voltage supply. Otherwise, this property is + omitted. + + cnv-gpios: + description: + The Convert Input (CNV). This input has multiple functions. It initiates + the conversions and selects the SPI mode of the device (chain or CS). In + 'single' mode, this property is omitted if the CNV pin is connected to the + CS line of the SPI controller. + maxItems: 1 + + turbo-gpios: + description: + GPIO connected to the TURBO line. If omitted, it is assumed that the TURBO + line is hard-wired and the state is determined by the adi,always-turbo + property. + maxItems: 1 + + adi,always-turbo: + type: boolean + description: + When present, this property indicates that the TURBO line is hard-wired + and the state is always high. If neither this property nor turbo-gpios is + present, the TURBO line is assumed to be hard-wired and the state is + always low. + + interrupts: + description: + The SDO pin can also function as a busy indicator. This node should be + connected to an interrupt that is triggered when the SDO line goes low + while the SDI line is high and the CNV line is low ('single' mode) or the + SDI line is low and the CNV line is high ('multi' mode); or when the SDO + line goes high while the SDI and CNV lines are high (chain mode), + maxItems: 1 + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + - vio-supply + - bvdd-supply + +allOf: + # ref-supply and refin-supply are mutually exclusive (neither is also valid) + - if: + required: + - ref-supply + then: + properties: + refin-supply: false + - if: + required: + - refin-supply + then: + properties: + ref-supply: false + # in '4-wire' mode, cnv-gpios is required, for other modes it is optional + - if: + not: + required: + - adi,spi-mode + then: + required: + - cnv-gpios + # chain mode has lower SCLK max rate and doesn't work when TURBO is enabled + - if: + required: + - adi,spi-mode + properties: + adi,spi-mode: + const: chain + then: + properties: + spi-max-frequency: + maximum: 90909090 + adi,always-turbo: false + required: + - '#daisy-chained-devices' + else: + properties: + '#daisy-chained-devices': false + # turbo-gpios and adi,always-turbo are mutually exclusive + - if: + required: + - turbo-gpios + then: + properties: + adi,always-turbo: false + - if: + required: + - adi,always-turbo + then: + properties: + turbo-gpios: false + +unevaluatedProperties: false + +examples: + - | + #include + spi { + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "adi,ad7944"; + reg = <0>; + spi-cpha; + spi-max-frequency = <111111111>; + avdd-supply = <&supply_2_5V>; + dvdd-supply = <&supply_2_5V>; + vio-supply = <&supply_1_8V>; + bvdd-supply = <&supply_5V>; + cnv-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + turbo-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml index 7ef46c90eb..da605a051b 100644 --- a/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml @@ -11,8 +11,13 @@ maintainers: properties: compatible: - enum: - - allwinner,sun20i-d1-gpadc + oneOf: + - enum: + - allwinner,sun20i-d1-gpadc + - items: + - enum: + - allwinner,sun50i-h616-gpadc + - const: allwinner,sun20i-d1-gpadc "#io-channel-cells": const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index 995cbf8cef..ec34c48d48 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -93,6 +93,10 @@ properties: '#size-cells': const: 0 + access-controllers: + minItems: 1 + maxItems: 2 + allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 1970503389..c1b1324fa1 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -59,6 +59,10 @@ properties: If not, SPI CLKOUT frequency will not be accurate. maximum: 20000000 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml index 96340a0575..8265d70909 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml @@ -139,7 +139,7 @@ allOf: Voltage output range of the channel as Required connections: Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V; - Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V; + Rfb2x for: 0 to 10 V; -2.5 to 7.5V; -5 to 5 V; oneOf: - items: - const: 0 diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad9739a.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad9739a.yaml new file mode 100644 index 0000000000..c0b3647611 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad9739a.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ad9739a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD9739A RF DAC + +maintainers: + - Dragos Bogdan + - Nuno Sa + +description: | + The AD9739A is a 14-bit, 2.5 GSPS high performance RF DACs that are capable + of synthesizing wideband signals from dc up to 3 GHz. + + https://www.analog.com/media/en/technical-documentation/data-sheets/ad9737a_9739a.pdf + +properties: + compatible: + enum: + - adi,ad9739a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-3p3-supply: + description: 3.3V Digital input supply. + + vdd-supply: + description: 1.8V Digital input supply. + + vdda-supply: + description: 3.3V Analog input supply. + + vddc-supply: + description: 1.8V Clock input supply. + + vref-supply: + description: Input/Output reference supply. + + io-backends: + maxItems: 1 + + adi,full-scale-microamp: + description: This property represents the DAC full scale current. + minimum: 8580 + maximum: 31700 + default: 20000 + +required: + - compatible + - reg + - clocks + - io-backends + - vdd-3p3-supply + - vdd-supply + - vdda-supply + - vddc-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "adi,ad9739a"; + reg = <0>; + + clocks = <&dac_clk>; + + io-backends = <&iio_backend>; + + vdd-3p3-supply = <&vdd_3_3>; + vdd-supply = <&vdd>; + vdda-supply = <&vdd_3_3>; + vddc-supply = <&vdd>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml new file mode 100644 index 0000000000..a55e9bfc66 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,axi-dac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AXI DAC IP core + +maintainers: + - Nuno Sa + +description: | + Analog Devices Generic AXI DAC IP core for interfacing a DAC device + with a high speed serial (JESD204B/C) or source synchronous parallel + interface (LVDS/CMOS). + Usually, some other interface type (i.e SPI) is used as a control + interface for the actual DAC, while this IP core will interface + to the data-lines of the DAC and handle the streaming of data from + memory via DMA into the DAC. + + https://wiki.analog.com/resources/fpga/docs/axi_dac_ip + +properties: + compatible: + enum: + - adi,axi-dac-9.1.b + + reg: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + items: + - const: tx + + clocks: + maxItems: 1 + + '#io-backend-cells': + const: 0 + +required: + - compatible + - dmas + - reg + - clocks + +additionalProperties: false + +examples: + - | + dac@44a00000 { + compatible = "adi,axi-dac-9.1.b"; + reg = <0x44a00000 0x10000>; + dmas = <&tx_dma 0>; + dma-names = "tx"; + #io-backend-cells = <0>; + clocks = <&axi_clk>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml index 04045b932b..b15de4eb20 100644 --- a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml +++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml @@ -45,6 +45,10 @@ properties: '#size-cells': const: 0 + access-controllers: + minItems: 1 + maxItems: 2 + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml index 79da0323c3..e59db861e2 100644 --- a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml @@ -21,6 +21,7 @@ properties: - ti,dac5573 - ti,dac6573 - ti,dac7573 + - ti,dac081c081 - ti,dac121c081 reg: diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml index eed0df9d3a..205d352ab4 100644 --- a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml +++ b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml @@ -4,16 +4,20 @@ $id: http://devicetree.org/schemas/iio/health/maxim,max30102.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Maxim MAX30102 heart rate and pulse oximeter and MAX30105 particle-sensor +title: Maxim MAX30101/2 heart rate and pulse oximeter and MAX30105 particle-sensor maintainers: - Matt Ranostay properties: compatible: - enum: - - maxim,max30102 - - maxim,max30105 + oneOf: + - enum: + - maxim,max30102 + - maxim,max30105 + - items: + - const: maxim,max30101 + - const: maxim,max30105 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml index 8b5dedd1a5..b375d30751 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml @@ -34,6 +34,9 @@ properties: reg: maxItems: 1 + reset-gpios: + maxItems: 1 + required: - compatible - reg @@ -43,6 +46,7 @@ additionalProperties: false examples: - | + #include #include i2c { #address-cells = <1>; @@ -54,5 +58,6 @@ examples: vdd-supply = <&vcc_3v3>; interrupt-parent = <&gpio3>; interrupts = <23 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml index 7cd05bcbee..3769f8e8e9 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml @@ -32,6 +32,8 @@ properties: - invensense,icm42605 - invensense,icm42622 - invensense,icm42631 + - invensense,icm42686 + - invensense,icm42688 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index 297b8a1a7f..587ff2bced 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -62,14 +62,15 @@ properties: allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: - not: - properties: - compatible: - contains: - enum: - - invensense,mpu9150 - - invensense,mpu9250 - - invensense,mpu9255 + properties: + compatible: + contains: + enum: + - invensense,iam20680 + - invensense,icm20602 + - invensense,icm20608 + - invensense,icm20609 + - invensense,icm20689 then: properties: i2c-gate: false diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml index 206af44f2c..b750096530 100644 --- a/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml +++ b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml @@ -4,17 +4,22 @@ $id: http://devicetree.org/schemas/iio/light/avago,apds9300.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Avago APDS9300 ambient light sensor +title: Avago Gesture/RGB/ALS/Proximity sensors maintainers: - - Jonathan Cameron + - Subhajit Ghosh description: | - Datasheet at https://www.avagotech.com/docs/AV02-1077EN + Datasheet: https://www.avagotech.com/docs/AV02-1077EN + Datasheet: https://www.avagotech.com/docs/AV02-4191EN + Datasheet: https://www.avagotech.com/docs/AV02-4755EN properties: compatible: - const: avago,apds9300 + enum: + - avago,apds9300 + - avago,apds9306 + - avago,apds9960 reg: maxItems: 1 @@ -22,6 +27,8 @@ properties: interrupts: maxItems: 1 + vdd-supply: true + additionalProperties: false required: @@ -30,6 +37,8 @@ required: examples: - | + #include + i2c { #address-cells = <1>; #size-cells = <0>; @@ -38,7 +47,8 @@ examples: compatible = "avago,apds9300"; reg = <0x39>; interrupt-parent = <&gpio2>; - interrupts = <29 8>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <®ulator_3v3>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml deleted file mode 100644 index f06e0fda56..0000000000 --- a/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml +++ /dev/null @@ -1,44 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/iio/light/avago,apds9960.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Avago APDS9960 gesture/RGB/ALS/proximity sensor - -maintainers: - - Matt Ranostay - -description: | - Datasheet at https://www.avagotech.com/docs/AV02-4191EN - -properties: - compatible: - const: avago,apds9960 - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - -additionalProperties: false - -required: - - compatible - - reg - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - light-sensor@39 { - compatible = "avago,apds9960"; - reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <16 1>; - }; - }; -... diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index dbb85135fd..312febeeb3 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -57,6 +57,8 @@ properties: interrupts: maxItems: 1 + vdd-supply: true + adi,mux-delay-config-us: description: | Extra delay prior to each conversion, in addition to the internal 1ms @@ -460,6 +462,7 @@ required: - compatible - reg - interrupts + - vdd-supply additionalProperties: false @@ -489,6 +492,7 @@ examples: #address-cells = <1>; #size-cells = <0>; + vdd-supply = <&supply>; interrupts = <20 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gpio>; diff --git a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml index 5b1769c19b..418c168b22 100644 --- a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml +++ b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml @@ -784,7 +784,7 @@ patternProperties: gpio-2: GPIO4 allOf: - - $ref: ../pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pincfg-node.yaml# properties: drive-open-drain: true diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml index dc4ac41f24..a62916d07a 100644 --- a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml +++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml @@ -18,9 +18,12 @@ allOf: properties: compatible: - enum: - - elan,ekth6915 - - ilitek,ili2901 + oneOf: + - items: + - enum: + - elan,ekth5015m + - const: elan,ekth6915 + - const: elan,ekth6915 reg: const: 0x10 @@ -33,6 +36,12 @@ properties: reset-gpios: description: Reset GPIO; not all touchscreens using eKTH6915 hook this up. + no-reset-on-power-off: + type: boolean + description: + Reset line is wired so that it can (and should) be left deasserted when + the power supply is off. + vcc33-supply: description: The 3.3V supply to the touchscreen. @@ -58,8 +67,8 @@ examples: #address-cells = <1>; #size-cells = <0>; - ap_ts: touchscreen@10 { - compatible = "elan,ekth6915"; + touchscreen@10 { + compatible = "elan,ekth5015m", "elan,ekth6915"; reg = <0x10>; interrupt-parent = <&tlmm>; diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml b/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml new file mode 100644 index 0000000000..1abeec768d --- /dev/null +++ b/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ilitek,ili2901.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI2901 touchscreen controller + +maintainers: + - Jiri Kosina + +description: + Supports the Ilitek ILI2901 touchscreen controller. + This touchscreen controller uses the i2c-hid protocol with a reset GPIO. + +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + +properties: + compatible: + enum: + - ilitek,ili2901 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + panel: true + + reset-gpios: + maxItems: 1 + + vcc33-supply: true + + vccio-supply: true + +required: + - compatible + - reg + - interrupts + - vcc33-supply + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@41 { + compatible = "ilitek,ili2901"; + reg = <0x41>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + vcc33-supply = <&pp3300_ts>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml index c8832cd0d7..2025d6a542 100644 --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml @@ -11,10 +11,18 @@ maintainers: properties: compatible: - enum: - - qcom,pm8058-vib - - qcom,pm8916-vib - - qcom,pm8921-vib + oneOf: + - enum: + - qcom,pm8058-vib + - qcom,pm8916-vib + - qcom,pm8921-vib + - qcom,pmi632-vib + - items: + - enum: + - qcom,pm7250b-vib + - qcom,pm7325b-vib + - qcom,pm7550ba-vib + - const: qcom,pmi632-vib reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index f2808cb4d9..745e57c051 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -39,7 +39,9 @@ properties: - edt,edt-ft5406 - edt,edt-ft5506 - evervision,ev-ft5726 + - focaltech,ft5452 - focaltech,ft6236 + - focaltech,ft8719 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt deleted file mode 100644 index 6c201a2ba8..0000000000 --- a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt +++ /dev/null @@ -1,21 +0,0 @@ -Texas Instruments TWL family (twl4030) pwrbutton module - -This module is part of the TWL4030. For more details about the whole -chip see Documentation/devicetree/bindings/mfd/ti,twl.yaml. - -This module provides a simple power button event via an Interrupt. - -Required properties: -- compatible: should be one of the following - - "ti,twl4030-pwrbutton": For controllers compatible with twl4030 -- interrupts: should be one of the following - - <8>: For controllers compatible with twl4030 - -Example: - -&twl { - twl_pwrbutton: pwrbutton { - compatible = "ti,twl4030-pwrbutton"; - interrupts = <8>; - }; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml index 83603180d8..f49b43f45f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml @@ -25,12 +25,12 @@ properties: - const: allwinner,sun6i-a31-sc-nmi deprecated: true - const: allwinner,sun7i-a20-sc-nmi - - items: - - const: allwinner,sun8i-v3s-nmi - - const: allwinner,sun9i-a80-nmi - const: allwinner,sun9i-a80-nmi - items: - - const: allwinner,sun50i-a100-nmi + - enum: + - allwinner,sun8i-v3s-nmi + - allwinner,sun50i-a100-nmi + - allwinner,sun50i-h616-nmi - const: allwinner,sun9i-a80-nmi reg: diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml index e1a379c052..123d24b055 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml @@ -48,7 +48,7 @@ properties: interrupt-controller: true "#interrupt-cells": - $ref: "arm,gic.yaml#/properties/#interrupt-cells" + $ref: arm,gic.yaml#/properties/#interrupt-cells required: - reg diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml index b417341fc8..fb3c29e813 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml @@ -39,6 +39,7 @@ properties: - renesas,intc-ex-r8a779a0 # R-Car V3U - renesas,intc-ex-r8a779f0 # R-Car S4-8 - renesas,intc-ex-r8a779g0 # R-Car V4H + - renesas,intc-ex-r8a779h0 # R-Car V4M - const: renesas,irqc '#interrupt-cells': diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file mode 100644 index 0000000000..190a6499c9 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,aplic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Advanced Platform Level Interrupt Controller (APLIC) + +maintainers: + - Anup Patel + +description: + The RISC-V advanced interrupt architecture (AIA) defines an advanced + platform level interrupt controller (APLIC) for handling wired interrupts + in a RISC-V platform. The RISC-V AIA specification can be found at + https://github.com/riscv/riscv-aia. + + The RISC-V APLIC is implemented as hierarchical APLIC domains where all + interrupt sources connect to the root APLIC domain and a parent APLIC + domain can delegate interrupt sources to it's child APLIC domains. There + is one device tree node for each APLIC domain. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - enum: + - qemu,aplic + - const: riscv,aplic + + reg: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts-extended: + minItems: 1 + maxItems: 16384 + description: + Given APLIC domain directly injects external interrupts to a set of + RISC-V HARTS (or CPUs). Each node pointed to should be a riscv,cpu-intc + node, which has a CPU node (i.e. RISC-V HART) as parent. + + msi-parent: + description: + Given APLIC domain forwards wired interrupts as MSIs to a AIA incoming + message signaled interrupt controller (IMSIC). If both "msi-parent" and + "interrupts-extended" properties are present then it means the APLIC + domain supports both MSI mode and Direct mode in HW. In this case, the + APLIC driver has to choose between MSI mode or Direct mode. + + riscv,num-sources: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 1023 + description: + Specifies the number of wired interrupt sources supported by this + APLIC domain. + + riscv,children: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 1024 + items: + maxItems: 1 + description: + A list of child APLIC domains for the given APLIC domain. Each child + APLIC domain is assigned a child index in increasing order, with the + first child APLIC domain assigned child index 0. The APLIC domain child + index is used by firmware to delegate interrupts from the given APLIC + domain to a particular child APLIC domain. + + riscv,delegation: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 1024 + items: + items: + - description: child APLIC domain phandle + - description: first interrupt number of the parent APLIC domain (inclusive) + - description: last interrupt number of the parent APLIC domain (inclusive) + description: + A interrupt delegation list where each entry is a triple consisting + of child APLIC domain phandle, first interrupt number of the parent + APLIC domain, and last interrupt number of the parent APLIC domain. + Firmware must configure interrupt delegation registers based on + interrupt delegation list. + +dependencies: + riscv,delegation: [ "riscv,children" ] + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - riscv,num-sources + +anyOf: + - required: + - interrupts-extended + - required: + - msi-parent + +unevaluatedProperties: false + +examples: + - | + // Example 1 (APLIC domains directly injecting interrupt to HARTs): + + interrupt-controller@c000000 { + compatible = "qemu,aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0xc000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + riscv,children = <&aplic1>, <&aplic2>; + riscv,delegation = <&aplic1 1 63>; + }; + + aplic1: interrupt-controller@d000000 { + compatible = "qemu,aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 9>, + <&cpu2_intc 9>; + reg = <0xd000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + }; + + aplic2: interrupt-controller@e000000 { + compatible = "qemu,aplic", "riscv,aplic"; + interrupts-extended = <&cpu3_intc 9>, + <&cpu4_intc 9>; + reg = <0xe000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + }; + + - | + // Example 2 (APLIC domains forwarding interrupts as MSIs): + + interrupt-controller@c000000 { + compatible = "qemu,aplic", "riscv,aplic"; + msi-parent = <&imsic_mlevel>; + reg = <0xc000000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + riscv,children = <&aplic3>; + riscv,delegation = <&aplic3 1 63>; + }; + + aplic3: interrupt-controller@d000000 { + compatible = "qemu,aplic", "riscv,aplic"; + msi-parent = <&imsic_slevel>; + reg = <0xd000000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml new file mode 100644 index 0000000000..84976f17a4 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsics.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Incoming MSI Controller (IMSIC) + +maintainers: + - Anup Patel + +description: | + The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming + MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V + AIA specification can be found at https://github.com/riscv/riscv-aia. + + The IMSIC is a per-CPU (or per-HART) device with separate interrupt file + for each privilege level (machine or supervisor). The configuration of + a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO + space to receive MSIs from devices. Each IMSIC interrupt file supports a + fixed number of interrupt identities (to distinguish MSIs from devices) + which is same for given privilege level across CPUs (or HARTs). + + The device tree of a RISC-V platform will have one IMSIC device tree node + for each privilege level (machine or supervisor) which collectively describe + IMSIC interrupt files at that privilege level across CPUs (or HARTs). + + The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform + follows a particular scheme defined by the RISC-V AIA specification. A IMSIC + group is a set of IMSIC interrupt files co-located in MMIO space and we can + have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a + RISC-V platform. The MSI target address of a IMSIC interrupt file at given + privilege level (machine or supervisor) encodes group index, HART index, + and guest index (shown below). + + XLEN-1 > (HART Index MSB) 12 0 + | | | | + ------------------------------------------------------------- + |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | + ------------------------------------------------------------- + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + - $ref: /schemas/interrupt-controller/msi-controller.yaml# + +properties: + compatible: + items: + - enum: + - qemu,imsics + - const: riscv,imsics + + reg: + minItems: 1 + maxItems: 16384 + description: + Base address of each IMSIC group. + + interrupt-controller: true + + "#interrupt-cells": + const: 0 + + msi-controller: true + + "#msi-cells": + const: 0 + + interrupts-extended: + minItems: 1 + maxItems: 16384 + description: + This property represents the set of CPUs (or HARTs) for which given + device tree node describes the IMSIC interrupt files. Each node pointed + to should be a riscv,cpu-intc node, which has a CPU node (i.e. RISC-V + HART) as parent. + + riscv,num-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Number of interrupt identities supported by IMSIC interrupt file. + + riscv,num-guest-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Number of interrupt identities are supported by IMSIC guest interrupt + file. When not specified it is assumed to be same as specified by the + riscv,num-ids property. + + riscv,guest-index-bits: + minimum: 0 + maximum: 7 + default: 0 + description: + Number of guest index bits in the MSI target address. + + riscv,hart-index-bits: + minimum: 0 + maximum: 15 + description: + Number of HART index bits in the MSI target address. When not + specified it is calculated based on the interrupts-extended property. + + riscv,group-index-bits: + minimum: 0 + maximum: 7 + default: 0 + description: + Number of group index bits in the MSI target address. + + riscv,group-index-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 55 + default: 24 + description: + The least significant bit position of the group index bits in the + MSI target address. + +required: + - compatible + - reg + - interrupt-controller + - msi-controller + - "#msi-cells" + - interrupts-extended + - riscv,num-ids + +unevaluatedProperties: false + +examples: + - | + // Example 1 (Machine-level IMSIC files with just one group): + + interrupt-controller@24000000 { + compatible = "qemu,imsics", "riscv,imsics"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0x28000000 0x4000>; + interrupt-controller; + #interrupt-cells = <0>; + msi-controller; + #msi-cells = <0>; + riscv,num-ids = <127>; + }; + + - | + // Example 2 (Supervisor-level IMSIC files with two groups): + + interrupt-controller@28000000 { + compatible = "qemu,imsics", "riscv,imsics"; + interrupts-extended = <&cpu1_intc 9>, + <&cpu2_intc 9>, + <&cpu3_intc 9>, + <&cpu4_intc 9>; + reg = <0x28000000 0x2000>, /* Group0 IMSICs */ + <0x29000000 0x2000>; /* Group1 IMSICs */ + interrupt-controller; + #interrupt-cells = <0>; + msi-controller; + #msi-cells = <0>; + riscv,num-ids = <127>; + riscv,group-index-bits = <1>; + riscv,group-index-shift = <24>; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml index 00c10a8258..9967e57b44 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml @@ -89,8 +89,23 @@ examples: reg = <0x5000d000 0x400>; }; + - | //Example 2 - exti2: interrupt-controller@40013c00 { + #include + exti2: interrupt-controller@5000d000 { + compatible = "st,stm32mp1-exti", "syscon"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000d000 0x400>; + interrupts-extended = + <&intc GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <&intc GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + - | + //Example 3 + exti3: interrupt-controller@40013c00 { compatible = "st,stm32-exti"; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/iommu/qcom,tbu.yaml b/Documentation/devicetree/bindings/iommu/qcom,tbu.yaml new file mode 100644 index 0000000000..82dfe93557 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/qcom,tbu.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/qcom,tbu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm TBU (Translation Buffer Unit) + +maintainers: + - Georgi Djakov + +description: + The Qualcomm SMMU500 implementation consists of TCU and TBU. The TBU contains + a Translation Lookaside Buffer (TLB) that caches page tables. TBUs provides + debug features to trace and trigger debug transactions. There are multiple TBU + instances with each client core. + +properties: + compatible: + enum: + - qcom,sc7280-tbu + - qcom,sdm845-tbu + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interconnects: + maxItems: 1 + + power-domains: + maxItems: 1 + + qcom,stream-id-range: + description: | + Phandle of a SMMU device and Stream ID range (address and size) that + is assigned by the TBU + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle of a smmu node + - description: stream id base address + - description: stream id size + +required: + - compatible + - reg + - qcom,stream-id-range + +additionalProperties: false + +examples: + - | + #include + #include + #include + + tbu@150e1000 { + compatible = "qcom,sdm845-tbu"; + reg = <0x150e1000 0x1000>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_PCIE_TBU_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>; + }; +... diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml index be90f68c11..0acaa2bcec 100644 --- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml +++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml @@ -50,6 +50,7 @@ properties: - renesas,ipmmu-r8a779a0 # R-Car V3U - renesas,ipmmu-r8a779f0 # R-Car S4-8 - renesas,ipmmu-r8a779g0 # R-Car V4H + - renesas,ipmmu-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-ipmmu-vmsa # R-Car Gen4 reg: diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml index 54a428d3d4..8b82c45d1a 100644 --- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml @@ -27,9 +27,14 @@ properties: - qcom,pm8994-lpg - qcom,pmc8180c-lpg - qcom,pmi632-lpg + - qcom,pmi8950-pwm - qcom,pmi8994-lpg - qcom,pmi8998-lpg - qcom,pmk8550-pwm + - items: + - enum: + - qcom,pm6150l-lpg + - const: qcom,pm8150l-lpg - items: - enum: - qcom,pm8550-pwm @@ -142,6 +147,7 @@ allOf: - qcom,pm8941-lpg - qcom,pm8994-lpg - qcom,pmc8180c-lpg + - qcom,pmi8950-pwm - qcom,pmi8994-lpg - qcom,pmi8998-lpg - qcom,pmk8550-pwm @@ -290,5 +296,3 @@ examples: label = "blue"; }; }; - -... diff --git a/Documentation/devicetree/bindings/leds/nxp,pca963x.yaml b/Documentation/devicetree/bindings/leds/nxp,pca963x.yaml new file mode 100644 index 0000000000..938d0e48fe --- /dev/null +++ b/Documentation/devicetree/bindings/leds/nxp,pca963x.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/nxp,pca963x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PCA963x LED controllers + +maintainers: + - Laurent Pinchart + +description: | + The NXP PCA963x are I2C-controlled LED drivers optimized for + Red/Green/Blue/Amber (RGBA) color mixing applications. Each LED is + individually controllable and has its own PWM controller. + + Datasheets are available at + + - https://www.nxp.com/docs/en/data-sheet/PCA9632.pdf + - https://www.nxp.com/docs/en/data-sheet/PCA9633.pdf + - https://www.nxp.com/docs/en/data-sheet/PCA9634.pdf + - https://www.nxp.com/docs/en/data-sheet/PCA9635.pdf + +properties: + compatible: + enum: + - nxp,pca9632 + - nxp,pca9633 + - nxp,pca9634 + - nxp,pca9635 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + nxp,hw-blink: + type: boolean + description: + Use hardware blinking instead of software blinking + + nxp,inverted-out: + type: boolean + description: + Invert the polarity of the generated PWM. + + nxp,period-scale: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + In some configurations, the chip blinks faster than expected. This + parameter provides a scaling ratio (fixed point, decimal divided by 1000) + to compensate, e.g. 1300=1.3x and 750=0.75x. + + nxp,totem-pole: + type: boolean + description: + Use totem pole (push-pull) instead of open-drain (pca9632 defaults to + open-drain, newer chips to totem pole). + +patternProperties: + "^led@[0-9a-f]+$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + minimum: 0 + + required: + - reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - nxp,pca9632 + - nxp,pca9633 + then: + patternProperties: + "^led@[0-9a-f]+$": + properties: + reg: + maximum: 3 + else: + patternProperties: + "^led@[0-9a-f]+$": + properties: + reg: + maximum: 7 + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@62 { + compatible = "nxp,pca9632"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_STATUS; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_STATUS; + }; + + led@2 { + reg = <2>; + color = ; + function = LED_FUNCTION_STATUS; + }; + + led@3 { + reg = <3>; + color = ; + function = LED_FUNCTION_STATUS; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt deleted file mode 100644 index 4eee414820..0000000000 --- a/Documentation/devicetree/bindings/leds/pca963x.txt +++ /dev/null @@ -1,52 +0,0 @@ -LEDs connected to pca9632, pca9633 or pca9634 - -Required properties: -- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635" - -Optional properties: -- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults - to open-drain, newer chips to totem pole) -- nxp,hw-blink : use hardware blinking instead of software blinking -- nxp,period-scale : In some configurations, the chip blinks faster than expected. - This parameter provides a scaling ratio (fixed point, decimal divided - by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x. -- nxp,inverted-out: invert the polarity of the generated PWM - -Each led is represented as a sub-node of the nxp,pca963x device. - -LED sub-node properties: -- label : (optional) see Documentation/devicetree/bindings/leds/common.txt -- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633, - 0 to 7 in pca9634, or 0 to 15 in pca9635) -- linux,default-trigger : (optional) - see Documentation/devicetree/bindings/leds/common.txt - -Examples: - -pca9632: pca9632 { - compatible = "nxp,pca9632"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x62>; - - red@0 { - label = "red"; - reg = <0>; - linux,default-trigger = "none"; - }; - green@1 { - label = "green"; - reg = <1>; - linux,default-trigger = "none"; - }; - blue@2 { - label = "blue"; - reg = <2>; - linux,default-trigger = "none"; - }; - unused@3 { - label = "unused"; - reg = <3>; - linux,default-trigger = "none"; - }; -}; diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml new file mode 100644 index 0000000000..449b55afeb --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml @@ -0,0 +1,224 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/arm,mhuv3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM MHUv3 Mailbox Controller + +maintainers: + - Sudeep Holla + - Cristian Marussi + +description: | + The Arm Message Handling Unit (MHU) Version 3 is a mailbox controller that + enables unidirectional communications with remote processors through various + possible transport protocols. + The controller can optionally support a varying number of extensions that, in + turn, enable different kinds of transport to be used for communication. + Number, type and characteristics of each supported extension can be discovered + dynamically at runtime. + + Given the unidirectional nature of the controller, an MHUv3 mailbox controller + is composed of a MHU Sender (MHUS) containing a PostBox (PBX) block and a MHU + Receiver (MHUR) containing a MailBox (MBX) block, where + + PBX is used to + - Configure the MHU + - Send Transfers to the Receiver + - Optionally receive acknowledgment of a Transfer from the Receiver + + MBX is used to + - Configure the MHU + - Receive Transfers from the Sender + - Optionally acknowledge Transfers sent by the Sender + + Both PBX and MBX need to be present and defined in the DT description if you + need to establish a bidirectional communication, since you will have to + acquire two distinct unidirectional channels, one for each block. + + As a consequence both blocks needs to be represented separately and specified + as distinct DT nodes in order to properly describe their resources. + + Note that, though, thanks to the runtime discoverability, there is no need to + identify the type of blocks with distinct compatibles. + + Following are the MHUv3 possible extensions. + + - Doorbell Extension (DBE): DBE defines a type of channel called a Doorbell + Channel (DBCH). DBCH enables a single bit Transfer to be sent from the + Sender to Receiver. The Transfer indicates that an event has occurred. + When DBE is implemented, the number of DBCHs that an implementation of the + MHU can support is between 1 and 128, numbered starting from 0 in ascending + order and discoverable at run-time. + Each DBCH contains 32 individual fields, referred to as flags, each of which + can be used independently. It is possible for the Sender to send multiple + Transfers at once using a single DBCH, so long as each Transfer uses + a different flag in the DBCH. + Optionally, data may be transmitted through an out-of-band shared memory + region, wherein the MHU Doorbell is used strictly as an interrupt generation + mechanism, but this is out of the scope of these bindings. + + - FastChannel Extension (FCE): FCE defines a type of channel called a Fast + Channel (FCH). FCH is intended for lower overhead communication between + Sender and Receiver at the expense of determinism. An FCH allows the Sender + to update the channel value at any time, regardless of whether the previous + value has been seen by the Receiver. When the Receiver reads the channel's + content it gets the last value written to the channel. + FCH is considered lossy in nature, and means that the Sender has no way of + knowing if, or when, the Receiver will act on the Transfer. + FCHs are expected to behave as RAM which generates interrupts when writes + occur to the locations within the RAM. + When FCE is implemented, the number of FCHs that an implementation of the + MHU can support is between 1-1024, if the FastChannel word-size is 32-bits, + or between 1-512, when the FastChannel word-size is 64-bits. + FCHs are numbered from 0 in ascending order. + Note that the number of FCHs and the word-size are implementation defined, + not configurable but discoverable at run-time. + Optionally, data may be transmitted through an out-of-band shared memory + region, wherein the MHU FastChannel is used as an interrupt generation + mechanism which carries also a pointer to such out-of-band data, but this + is out of the scope of these bindings. + + - FIFO Extension (FE): FE defines a Channel type called a FIFO Channel (FFCH). + FFCH allows a Sender to send + - Multiple Transfers to the Receiver without having to wait for the + previous Transfer to be acknowledged by the Receiver, as long as the + FIFO has room for the Transfer. + - Transfers which require the Receiver to provide acknowledgment. + - Transfers which have in-band payload. + In all cases, the data is guaranteed to be observed by the Receiver in the + same order which the Sender sent it. + When FE is implemented, the number of FFCHs that an implementation of the + MHU can support is between 1 and 64, numbered starting from 0 in ascending + order. The number of FFCHs, their depth (same for all implemented FFCHs) and + the access-granularity are implementation defined, not configurable but + discoverable at run-time. + Optionally, additional data may be transmitted through an out-of-band shared + memory region, wherein the MHU FIFO is used to transmit, in order, a small + part of the payload (like a header) and a reference to the shared memory + area holding the remaining, bigger, chunk of the payload, but this is out of + the scope of these bindings. + +properties: + compatible: + const: arm,mhuv3 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 74 + + interrupt-names: + description: | + The MHUv3 controller generates a number of events some of which are used + to generate interrupts; as a consequence it can expose a varying number of + optional PBX/MBX interrupts, representing the events generated during the + operation of the various transport protocols associated with different + extensions. All interrupts of the MHU are level-sensitive. + Some of these optional interrupts are defined per-channel, where the + number of channels effectively available is implementation defined and + run-time discoverable. + In the following names are enumerated using patterns, with per-channel + interrupts implicitly capped at the maximum channels allowed by the + specification for each extension type. + For the sake of simplicity maxItems is anyway capped to a most plausible + number, assuming way less channels would be implemented than actually + possible. + + The only mandatory interrupts on the MHU are: + - combined + - mbx-fch-xfer- but only if mbx-fcgrp-xfer- is not implemented. + + minItems: 1 + maxItems: 74 + items: + oneOf: + - const: combined + description: PBX/MBX Combined interrupt + - const: combined-ffch + description: PBX/MBX FIFO Combined interrupt + - pattern: '^ffch-low-tide-[0-9]+$' + description: PBX/MBX FIFO Channel Low Tide interrupt + - pattern: '^ffch-high-tide-[0-9]+$' + description: PBX/MBX FIFO Channel High Tide interrupt + - pattern: '^ffch-flush-[0-9]+$' + description: PBX/MBX FIFO Channel Flush interrupt + - pattern: '^mbx-dbch-xfer-[0-9]+$' + description: MBX Doorbell Channel Transfer interrupt + - pattern: '^mbx-fch-xfer-[0-9]+$' + description: MBX FastChannel Transfer interrupt + - pattern: '^mbx-fchgrp-xfer-[0-9]+$' + description: MBX FastChannel Group Transfer interrupt + - pattern: '^mbx-ffch-xfer-[0-9]+$' + description: MBX FIFO Channel Transfer interrupt + - pattern: '^pbx-dbch-xfer-ack-[0-9]+$' + description: PBX Doorbell Channel Transfer Ack interrupt + - pattern: '^pbx-ffch-xfer-ack-[0-9]+$' + description: PBX FIFO Channel Transfer Ack interrupt + + '#mbox-cells': + description: | + The first argument in the consumers 'mboxes' property represents the + extension type, the second is for the channel number while the third + depends on extension type. + + Extension types constants are defined in . + + Extension type for DBE is DBE_EXT and the third parameter represents the + doorbell flag number to use. + Extension type for FCE is FCE_EXT, third parameter unused. + Extension type for FE is FE_EXT, third parameter unused. + + mboxes = <&mhu DBE_EXT 0 5>; // DBE, Doorbell Channel Window 0, doorbell 5. + mboxes = <&mhu DBE_EXT 7>; // DBE, Doorbell Channel Window 1, doorbell 7. + mboxes = <&mhu FCE_EXT 0 0>; // FCE, FastChannel Window 0. + mboxes = <&mhu FCE_EXT 3 0>; // FCE, FastChannel Window 3. + mboxes = <&mhu FE_EXT 1 0>; // FE, FIFO Channel Window 1. + mboxes = <&mhu FE_EXT 7 0>; // FE, FIFO Channel Window 7. + const: 3 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + mailbox@2aaa0000 { + compatible = "arm,mhuv3"; + #mbox-cells = <3>; + reg = <0 0x2aaa0000 0 0x10000>; + clocks = <&clock 0>; + interrupt-names = "combined", "pbx-dbch-xfer-ack-1", + "ffch-high-tide-0"; + interrupts = , + ; + }; + + mailbox@2ab00000 { + compatible = "arm,mhuv3"; + #mbox-cells = <3>; + reg = <0 0x2aab0000 0 0x10000>; + clocks = <&clock 0>; + interrupt-names = "combined", "mbx-dbch-xfer-1", "ffch-low-tide-0"; + interrupts = , + , + ; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml index 79eb523b84..982c741e62 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml @@ -30,6 +30,7 @@ properties: - const: syscon - items: - enum: + - qcom,msm8974-apcs-kpss-global - qcom,msm8976-apcs-kpss-global - const: qcom,msm8994-apcs-kpss-global - const: syscon diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml index 8f004868aa..05e4e1d517 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml @@ -28,6 +28,7 @@ properties: - qcom,sa8775p-ipcc - qcom,sc7280-ipcc - qcom,sc8280xp-ipcc + - qcom,sdx75-ipcc - qcom,sm6350-ipcc - qcom,sm6375-ipcc - qcom,sm8250-ipcc diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml b/Documentation/devicetree/bindings/media/amphion,vpu.yaml index c0d83d7552..9801de3ed8 100644 --- a/Documentation/devicetree/bindings/media/amphion,vpu.yaml +++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml @@ -44,7 +44,7 @@ patternProperties: description: Each vpu encoder or decoder correspond a MU, which used for communication between driver and firmware. Implement via mailbox on driver. - $ref: ../mailbox/fsl,mu.yaml# + $ref: /schemas/mailbox/fsl,mu.yaml# "^vpu-core@[0-9a-f]+$": diff --git a/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml new file mode 100644 index 0000000000..5fb5d60f06 --- /dev/null +++ b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/brcm,bcm2835-unicam.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM283x Camera Interface (Unicam) + +maintainers: + - Raspberry Pi Kernel Maintenance + +description: |- + The Unicam block on BCM283x SoCs is the receiver for either + CSI-2 or CCP2 data from image sensors or similar devices. + + The main platform using this SoC is the Raspberry Pi family of boards. On + the Pi the VideoCore firmware can also control this hardware block, and + driving it from two different processors will cause issues. To avoid this, + the firmware checks the device tree configuration during boot. If it finds + device tree nodes whose name starts with 'csi' then it will stop the firmware + accessing the block, and it can then safely be used via the device tree + binding. + +properties: + compatible: + const: brcm,bcm2835-unicam + + reg: + items: + - description: Unicam block. + - description: Clock Manager Image (CMI) block. + + reg-names: + items: + - const: unicam + - const: cmi + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Clock to drive the LP state machine of Unicam. + - description: Clock for the VPU (core clock). + + clock-names: + items: + - const: lp + - const: vpu + + power-domains: + items: + - description: Unicam power domain + + brcm,num-data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 2, 4 ] + description: | + Number of CSI-2 data lanes supported by this Unicam instance. The number + of data lanes actively used is specified with the data-lanes endpoint + property. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + additionalProperties: false + + properties: + bus-type: + enum: [ 3, 4 ] + + clock-noncontinuous: true + data-lanes: true + remote-endpoint: true + + required: + - bus-type + - data-lanes + - remote-endpoint + + required: + - endpoint + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - power-domains + - brcm,num-data-lanes + - port + +additionalProperties: False + +examples: + - | + #include + #include + #include + #include + + csi1: csi@7e801000 { + compatible = "brcm,bcm2835-unicam"; + reg = <0x7e801000 0x800>, + <0x7e802004 0x4>; + reg-names = "unicam", "cmi"; + interrupts = ; + clocks = <&clocks BCM2835_CLOCK_CAM1>, + <&firmware_clocks 4>; + clock-names = "lp", "vpu"; + power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>; + brcm,num-data-lanes = <2>; + port { + csi1_ep: endpoint { + remote-endpoint = <&imx219_0>; + bus-type = ; + data-lanes = <1 2>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml index 2314a9a146..1d930d9e10 100644 --- a/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml +++ b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml @@ -29,6 +29,10 @@ properties: - const: cec - const: hdmi-cec + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml index f81e7daed6..2bf1a81fea 100644 --- a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml +++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml @@ -15,7 +15,7 @@ description: | They include an ISP capable of auto exposure and auto white balance. allOf: - - $ref: ../video-interface-devices.yaml# + - $ref: /schemas/media/video-interface-devices.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml index 1726ecca4c..9eac588de0 100644 --- a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml +++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml @@ -19,7 +19,7 @@ description: either through a parallel interface or through MIPI CSI-2. allOf: - - $ref: ../video-interface-devices.yaml# + - $ref: /schemas/media/video-interface-devices.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml deleted file mode 100644 index 816dac9c6f..0000000000 --- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml +++ /dev/null @@ -1,132 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -# Copyright (c) 2019 MediaTek Inc. -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Omnivision OV8856 CMOS Sensor - -maintainers: - - Sakari Ailus - -description: |- - The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS - image sensor that delivers 3264x2448 at 30fps. It provides full-frame, - sub-sampled, and windowed 10-bit MIPI images in various formats via the - Serial Camera Control Bus (SCCB) interface. This chip is programmable - through I2C and two-wire SCCB. The sensor output is available via CSI-2 - serial data output (up to 4-lane). - -properties: - compatible: - const: ovti,ov8856 - - reg: - maxItems: 1 - - clocks: - maxItems: 1 - - clock-names: - description: - Input clock for the sensor. - items: - - const: xvclk - - clock-frequency: - description: - Frequency of the xvclk clock in Hertz. - - dovdd-supply: - description: - Definition of the regulator used as interface power supply. - - avdd-supply: - description: - Definition of the regulator used as analog power supply. - - dvdd-supply: - description: - Definition of the regulator used as digital power supply. - - reset-gpios: - description: - The phandle and specifier for the GPIO that controls sensor reset. - This corresponds to the hardware pin XSHUTDOWN which is physically - active low. - - port: - $ref: /schemas/graph.yaml#/$defs/port-base - additionalProperties: false - - properties: - endpoint: - $ref: /schemas/media/video-interfaces.yaml# - unevaluatedProperties: false - - properties: - data-lanes: - oneOf: - - items: - - const: 1 - - items: - - const: 1 - - const: 2 - - items: - - const: 1 - - const: 2 - - const: 3 - - const: 4 - - required: - - link-frequencies - -required: - - compatible - - reg - - clocks - - clock-names - - clock-frequency - - dovdd-supply - - avdd-supply - - dvdd-supply - - reset-gpios - - port - -additionalProperties: false - -examples: - - | - #include - - i2c { - #address-cells = <1>; - #size-cells = <0>; - - ov8856: camera@10 { - compatible = "ovti,ov8856"; - reg = <0x10>; - - reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&clk_24m_cam>; - - clocks = <&cam_osc>; - clock-names = "xvclk"; - clock-frequency = <19200000>; - - avdd-supply = <&mt6358_vcama2_reg>; - dvdd-supply = <&mt6358_vcamd_reg>; - dovdd-supply = <&mt6358_vcamio_reg>; - - port { - wcam_out: endpoint { - remote-endpoint = <&mipi_in_wcam>; - data-lanes = <1 2 3 4>; - link-frequencies = /bits/ 64 <360000000>; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml index c87677f5e2..634d3b821b 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml @@ -50,9 +50,23 @@ properties: Definition of the regulator used as digital power supply. port: - $ref: /schemas/graph.yaml#/properties/port description: A node containing an output port node. + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + additionalProperties: false + + properties: + link-frequencies: true + + remote-endpoint: true + + required: + - link-frequencies required: - compatible @@ -89,6 +103,7 @@ examples: port { ov2680_to_mipi: endpoint { remote-endpoint = <&mipi_from_sensor>; + link-frequencies = /bits/ 64 <330000000>; }; }; }; diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8856.yaml new file mode 100644 index 0000000000..3f6f72c354 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8856.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2019 MediaTek Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov8856.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV8856 CMOS Sensor + +maintainers: + - Sakari Ailus + +description: |- + The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS + image sensor that delivers 3264x2448 at 30fps. It provides full-frame, + sub-sampled, and windowed 10-bit MIPI images in various formats via the + Serial Camera Control Bus (SCCB) interface. This chip is programmable + through I2C and two-wire SCCB. The sensor output is available via CSI-2 + serial data output (up to 4-lane). + +properties: + compatible: + const: ovti,ov8856 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: + Input clock for the sensor. + items: + - const: xvclk + + clock-frequency: + description: + Frequency of the xvclk clock in Hertz. + + dovdd-supply: + description: + Definition of the regulator used as interface power supply. + + avdd-supply: + description: + Definition of the regulator used as analog power supply. + + dvdd-supply: + description: + Definition of the regulator used as digital power supply. + + reset-gpios: + description: + The phandle and specifier for the GPIO that controls sensor reset. + This corresponds to the hardware pin XSHUTDOWN which is physically + active low. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + oneOf: + - items: + - const: 1 + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - link-frequencies + +required: + - compatible + - reg + - clocks + - clock-names + - clock-frequency + - dovdd-supply + - avdd-supply + - dvdd-supply + - reset-gpios + - port + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov8856: camera@10 { + compatible = "ovti,ov8856"; + reg = <0x10>; + + reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&clk_24m_cam>; + + clocks = <&cam_osc>; + clock-names = "xvclk"; + clock-frequency = <19200000>; + + avdd-supply = <&mt6358_vcama2_reg>; + dvdd-supply = <&mt6358_vcamd_reg>; + dovdd-supply = <&mt6358_vcamio_reg>; + + port { + wcam_out: endpoint { + remote-endpoint = <&mipi_in_wcam>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <360000000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml index 60903da84e..0162eec8ca 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml @@ -16,7 +16,7 @@ description: | maximum throughput of 1.2Gbps/lane. allOf: - - $ref: ../video-interface-devices.yaml# + - $ref: /schemas/media/video-interface-devices.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml index a531badc16..bf05ca4860 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml @@ -23,6 +23,9 @@ description: |- is treated the same as this as it was the original compatible string. imx290llr is the mono version of the sensor. +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + properties: compatible: oneOf: @@ -101,7 +104,7 @@ required: - vdddo-supply - port -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml index 9a00dab2e8..34962c5c70 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml @@ -18,7 +18,7 @@ description: |- available via CSI-2 serial data output (two or four lanes). allOf: - - $ref: ../video-interface-devices.yaml# + - $ref: /schemas/media/video-interface-devices.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml index e4665469a8..4d5348d456 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml @@ -84,6 +84,7 @@ allOf: properties: port@0: description: MIPI CSI-2 RX + port@1: false required: - port@0 diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml index 3d9d1db370..2be30c5fdc 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml @@ -31,6 +31,11 @@ properties: reg: maxItems: 1 + clocks: + items: + - description: AXI DMA engine clock for fetching JPEG bitstream from memory (per) + - description: IP bus clock for register access (ipg) + interrupts: description: | There are 4 slots available in the IP, which the driver may use @@ -49,6 +54,7 @@ properties: required: - compatible - reg + - clocks - interrupts - power-domains @@ -56,12 +62,15 @@ additionalProperties: false examples: - | + #include #include #include jpegdec: jpegdec@58400000 { compatible = "nxp,imx8qxp-jpgdec"; reg = <0x58400000 0x00050000 >; + clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; interrupts = , , , @@ -76,6 +85,8 @@ examples: jpegenc: jpegenc@58450000 { compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc"; reg = <0x58450000 0x00050000 >; + clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg__lpcg IMX_LPCG_CLK_4>; interrupts = , , , diff --git a/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml new file mode 100644 index 0000000000..c0bc317098 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml @@ -0,0 +1,512 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,sc8280xp-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC8280XP Camera Subsystem (CAMSS) + +maintainers: + - Bryan O'Donoghue + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms. + +properties: + compatible: + const: qcom,sc8280xp-camss + + clocks: + maxItems: 40 + + clock-names: + items: + - const: camnoc_axi + - const: cpas_ahb + - const: csiphy0 + - const: csiphy0_timer + - const: csiphy1 + - const: csiphy1_timer + - const: csiphy2 + - const: csiphy2_timer + - const: csiphy3 + - const: csiphy3_timer + - const: vfe0_axi + - const: vfe0 + - const: vfe0_cphy_rx + - const: vfe0_csid + - const: vfe1_axi + - const: vfe1 + - const: vfe1_cphy_rx + - const: vfe1_csid + - const: vfe2_axi + - const: vfe2 + - const: vfe2_cphy_rx + - const: vfe2_csid + - const: vfe3_axi + - const: vfe3 + - const: vfe3_cphy_rx + - const: vfe3_csid + - const: vfe_lite0 + - const: vfe_lite0_cphy_rx + - const: vfe_lite0_csid + - const: vfe_lite1 + - const: vfe_lite1_cphy_rx + - const: vfe_lite1_csid + - const: vfe_lite2 + - const: vfe_lite2_cphy_rx + - const: vfe_lite2_csid + - const: vfe_lite3 + - const: vfe_lite3_cphy_rx + - const: vfe_lite3_csid + - const: gcc_axi_hf + - const: gcc_axi_sf + + interrupts: + maxItems: 20 + + interrupt-names: + items: + - const: csid1_lite + - const: vfe_lite1 + - const: csiphy3 + - const: csid0 + - const: vfe0 + - const: csid1 + - const: vfe1 + - const: csid0_lite + - const: vfe_lite0 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csid2 + - const: vfe2 + - const: csid3_lite + - const: csid2_lite + - const: vfe_lite3 + - const: vfe_lite2 + - const: csid3 + - const: vfe3 + + iommus: + maxItems: 16 + + interconnects: + maxItems: 4 + + interconnect-names: + items: + - const: cam_ahb + - const: cam_hf_mnoc + - const: cam_sf_mnoc + - const: cam_sf_icp_mnoc + + power-domains: + items: + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE3 GDSC - Image Front End, Global Distributed Switch Controller. + - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller. + + power-domain-names: + items: + - const: ife0 + - const: ife1 + - const: ife2 + - const: ife3 + - const: top + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data from CSIPHY0. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data from CSIPHY1. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data from CSIPHY2. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data from CSIPHY3. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + reg: + maxItems: 20 + + reg-names: + items: + - const: csiphy2 + - const: csiphy3 + - const: csiphy0 + - const: csiphy1 + - const: vfe0 + - const: csid0 + - const: vfe1 + - const: csid1 + - const: vfe2 + - const: csid2 + - const: vfe_lite0 + - const: csid0_lite + - const: vfe_lite1 + - const: csid1_lite + - const: vfe_lite2 + - const: csid2_lite + - const: vfe_lite3 + - const: csid3_lite + - const: vfe3 + - const: csid3 + + vdda-phy-supply: + description: + Phandle to a regulator supply to PHY core block. + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + +required: + - clock-names + - clocks + - compatible + - interconnects + - interconnect-names + - interrupts + - interrupt-names + - iommus + - power-domains + - power-domain-names + - reg + - reg-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + camss: camss@ac5a000 { + compatible = "qcom,sc8280xp-camss"; + + reg = <0 0x0ac5a000 0 0x2000>, + <0 0x0ac5c000 0 0x2000>, + <0 0x0ac65000 0 0x2000>, + <0 0x0ac67000 0 0x2000>, + <0 0x0acaf000 0 0x4000>, + <0 0x0acb3000 0 0x1000>, + <0 0x0acb6000 0 0x4000>, + <0 0x0acba000 0 0x1000>, + <0 0x0acbd000 0 0x4000>, + <0 0x0acc1000 0 0x1000>, + <0 0x0acc4000 0 0x4000>, + <0 0x0acc8000 0 0x1000>, + <0 0x0accb000 0 0x4000>, + <0 0x0accf000 0 0x1000>, + <0 0x0acd2000 0 0x4000>, + <0 0x0acd6000 0 0x1000>, + <0 0x0acd9000 0 0x4000>, + <0 0x0acdd000 0 0x1000>, + <0 0x0ace0000 0 0x4000>, + <0 0x0ace4000 0 0x1000>; + + reg-names = "csiphy2", + "csiphy3", + "csiphy0", + "csiphy1", + "vfe0", + "csid0", + "vfe1", + "csid1", + "vfe2", + "csid2", + "vfe_lite0", + "csid0_lite", + "vfe_lite1", + "csid1_lite", + "vfe_lite2", + "csid2_lite", + "vfe_lite3", + "csid3_lite", + "vfe3", + "csid3"; + + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + + interrupt-names = "csid1_lite", + "vfe_lite1", + "csiphy3", + "csid0", + "vfe0", + "csid1", + "vfe1", + "csid0_lite", + "vfe_lite0", + "csiphy0", + "csiphy1", + "csiphy2", + "csid2", + "vfe2", + "csid3_lite", + "csid2_lite", + "vfe_lite3", + "vfe_lite2", + "csid3", + "vfe3"; + + power-domains = <&camcc IFE_0_GDSC>, + <&camcc IFE_1_GDSC>, + <&camcc IFE_2_GDSC>, + <&camcc IFE_3_GDSC>, + <&camcc TITAN_TOP_GDSC>; + + power-domain-names = "ife0", + "ife1", + "ife2", + "ife3", + "top"; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CSIPHY0_CLK>, + <&camcc CAMCC_CSI0PHYTIMER_CLK>, + <&camcc CAMCC_CSIPHY1_CLK>, + <&camcc CAMCC_CSI1PHYTIMER_CLK>, + <&camcc CAMCC_CSIPHY2_CLK>, + <&camcc CAMCC_CSI2PHYTIMER_CLK>, + <&camcc CAMCC_CSIPHY3_CLK>, + <&camcc CAMCC_CSI3PHYTIMER_CLK>, + <&camcc CAMCC_IFE_0_AXI_CLK>, + <&camcc CAMCC_IFE_0_CLK>, + <&camcc CAMCC_IFE_0_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_0_CSID_CLK>, + <&camcc CAMCC_IFE_1_AXI_CLK>, + <&camcc CAMCC_IFE_1_CLK>, + <&camcc CAMCC_IFE_1_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_1_CSID_CLK>, + <&camcc CAMCC_IFE_2_AXI_CLK>, + <&camcc CAMCC_IFE_2_CLK>, + <&camcc CAMCC_IFE_2_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_2_CSID_CLK>, + <&camcc CAMCC_IFE_3_AXI_CLK>, + <&camcc CAMCC_IFE_3_CLK>, + <&camcc CAMCC_IFE_3_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_3_CSID_CLK>, + <&camcc CAMCC_IFE_LITE_0_CLK>, + <&camcc CAMCC_IFE_LITE_0_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_LITE_0_CSID_CLK>, + <&camcc CAMCC_IFE_LITE_1_CLK>, + <&camcc CAMCC_IFE_LITE_1_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_LITE_1_CSID_CLK>, + <&camcc CAMCC_IFE_LITE_2_CLK>, + <&camcc CAMCC_IFE_LITE_2_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_LITE_2_CSID_CLK>, + <&camcc CAMCC_IFE_LITE_3_CLK>, + <&camcc CAMCC_IFE_LITE_3_CPHY_RX_CLK>, + <&camcc CAMCC_IFE_LITE_3_CSID_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&gcc GCC_CAMERA_SF_AXI_CLK>; + + clock-names = "camnoc_axi", + "cpas_ahb", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_csid", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_csid", + "vfe2_axi", + "vfe2", + "vfe2_cphy_rx", + "vfe2_csid", + "vfe3_axi", + "vfe3", + "vfe3_cphy_rx", + "vfe3_csid", + "vfe_lite0", + "vfe_lite0_cphy_rx", + "vfe_lite0_csid", + "vfe_lite1", + "vfe_lite1_cphy_rx", + "vfe_lite1_csid", + "vfe_lite2", + "vfe_lite2_cphy_rx", + "vfe_lite2_csid", + "vfe_lite3", + "vfe_lite3_cphy_rx", + "vfe_lite3_csid", + "gcc_axi_hf", + "gcc_axi_sf"; + + + iommus = <&apps_smmu 0x2000 0x4e0>, + <&apps_smmu 0x2020 0x4e0>, + <&apps_smmu 0x2040 0x4e0>, + <&apps_smmu 0x2060 0x4e0>, + <&apps_smmu 0x2080 0x4e0>, + <&apps_smmu 0x20e0 0x4e0>, + <&apps_smmu 0x20c0 0x4e0>, + <&apps_smmu 0x20a0 0x4e0>, + <&apps_smmu 0x2400 0x4e0>, + <&apps_smmu 0x2420 0x4e0>, + <&apps_smmu 0x2440 0x4e0>, + <&apps_smmu 0x2460 0x4e0>, + <&apps_smmu 0x2480 0x4e0>, + <&apps_smmu 0x24e0 0x4e0>, + <&apps_smmu 0x24c0 0x4e0>, + <&apps_smmu 0x24a0 0x4e0>; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>, + <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "cam_ahb", + "cam_hf_mnoc", + "cam_sf_mnoc", + "cam_sf_icp_mnoc"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + csiphy_ep0: endpoint@0 { + reg = <0>; + clock-lanes = <7>; + data-lanes = <0 1>; + remote-endpoint = <&sensor_ep>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml index 6b3e413ced..3414712719 100644 --- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml @@ -36,6 +36,10 @@ properties: resets: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + port: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml b/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml index b8611bc875..73726c65cf 100644 --- a/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml +++ b/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml @@ -30,6 +30,10 @@ properties: clocks: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml new file mode 100644 index 0000000000..c0e47055f2 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/samsung,s5pv210-dmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5Pv210 SoC Dynamic Memory Controller + +maintainers: + - Krzysztof Kozlowski + +description: + Dynamic Memory Controller interfaces external JEDEC DDR-type SDRAM. + +properties: + compatible: + const: samsung,s5pv210-dmc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + memory-controller@f0000000 { + compatible = "samsung,s5pv210-dmc"; + reg = <0xf0000000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml index 84ac6f50a6..706e45eb4d 100644 --- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml @@ -50,6 +50,10 @@ properties: Reflects the memory layout with four integer values per bank. Format: 0
+ access-controllers: + minItems: 1 + maxItems: 2 + patternProperties: "^.*@[0-4],[a-f0-9]+$": additionalProperties: true diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml index 6811246c57..9ae419748a 100644 --- a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml +++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml @@ -21,7 +21,7 @@ description: | regulators. allOf: - - $ref: ../input/input.yaml + - $ref: /schemas/input/input.yaml properties: compatible: @@ -57,7 +57,7 @@ properties: switchldo1: type: object - $ref: ../regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml properties: regulator-name: true @@ -76,7 +76,7 @@ properties: "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$": type: object - $ref: ../regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml properties: regulator-name: true diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml index 8789e3639f..ca0e9f1f23 100644 --- a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml @@ -20,7 +20,7 @@ properties: maxItems: 1 patternProperties: - "^.*_(clk|rst)$": + "^.*-(clk|rst)$": type: object unevaluatedProperties: false @@ -171,7 +171,7 @@ examples: compatible = "allwinner,sun6i-a31-prcm"; reg = <0x01f01400 0x200>; - ar100: ar100_clk { + ar100: ar100-clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; clocks = <&rtc 0>, <&osc24M>, @@ -180,7 +180,7 @@ examples: clock-output-names = "ar100"; }; - ahb0: ahb0_clk { + ahb0: ahb0-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <1>; @@ -189,14 +189,14 @@ examples: clock-output-names = "ahb0"; }; - apb0: apb0_clk { + apb0: apb0-clk { compatible = "allwinner,sun6i-a31-apb0-clk"; #clock-cells = <0>; clocks = <&ahb0>; clock-output-names = "apb0"; }; - apb0_gates: apb0_gates_clk { + apb0_gates: apb0-gates-clk { compatible = "allwinner,sun6i-a31-apb0-gates-clk"; #clock-cells = <1>; clocks = <&apb0>; @@ -206,14 +206,14 @@ examples: "apb0_i2c"; }; - ir_clk: ir_clk { + ir_clk: ir-clk { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; clocks = <&rtc 0>, <&osc24M>; clock-output-names = "ir"; }; - apb0_rst: apb0_rst { + apb0_rst: apb0-rst { compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml index 1689b986f4..86ee69c0f4 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml +++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml @@ -47,10 +47,18 @@ patternProperties: type: object '^pinctrl(@[0-9a-f]+)?$': - oneOf: - - $ref: /schemas/pinctrl/aspeed,ast2400-pinctrl.yaml - - $ref: /schemas/pinctrl/aspeed,ast2500-pinctrl.yaml - - $ref: /schemas/pinctrl/aspeed,ast2600-pinctrl.yaml + type: object + additionalProperties: true + properties: + compatible: + contains: + enum: + - aspeed,ast2400-pinctrl + - aspeed,ast2500-pinctrl + - aspeed,ast2600-pinctrl + + required: + - compatible '^interrupt-controller@[0-9a-f]+$': description: See Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml index b85819fbb0..04910e4f88 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml @@ -34,19 +34,19 @@ properties: patternProperties: '^clock-controller@[a-f0-9]+$': - $ref: ../clock/brcm,iproc-clocks.yaml + $ref: /schemas/clock/brcm,iproc-clocks.yaml '^phy@[a-f0-9]+$': - $ref: ../phy/bcm-ns-usb2-phy.yaml + $ref: /schemas/phy/bcm-ns-usb2-phy.yaml '^pinctrl@[a-f0-9]+$': - $ref: ../pinctrl/brcm,ns-pinmux.yaml + $ref: /schemas/pinctrl/brcm,ns-pinmux.yaml '^syscon@[a-f0-9]+$': $ref: syscon.yaml '^thermal@[a-f0-9]+$': - $ref: ../thermal/brcm,ns-thermal.yaml + $ref: /schemas/thermal/brcm,ns-thermal.yaml additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt deleted file mode 100644 index 82f82e0695..0000000000 --- a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt +++ /dev/null @@ -1,16 +0,0 @@ -Broadcom iProc Chip Device Resource Unit (CDRU) - -Various Broadcom iProc SoCs have a set of registers that provide various -chip specific device and resource configurations. This node allows access to -these CDRU registers via syscon. - -Required properties: -- compatible: should contain: - "brcm,sr-cdru", "syscon" for Stingray -- reg: base address and range of the CDRU registers - -Example: - cdru: syscon@6641d000 { - compatible = "brcm,sr-cdru", "syscon"; - reg = <0 0x6641d000 0 0x400>; - }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt deleted file mode 100644 index 4421e9771b..0000000000 --- a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt +++ /dev/null @@ -1,18 +0,0 @@ -Broadcom iProc Multi Host Bridge (MHB) - -Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls -the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint -interface; 3) access to the Nitro (network processing) engine - -This node allows access to these MHB registers via syscon. - -Required properties: -- compatible: should contain: - "brcm,sr-mhb", "syscon" for Stingray -- reg: base address and range of the MHB registers - -Example: - mhb: syscon@60401000 { - compatible = "brcm,sr-mhb", "syscon"; - reg = <0 0x60401000 0 0x38c>; - }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,misc.yaml b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml index cff7d772a7..abe24526f3 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,misc.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml @@ -33,7 +33,7 @@ properties: patternProperties: '^reset-controller@[a-f0-9]+$': - $ref: ../reset/brcm,bcm4908-misc-pcie-reset.yaml + $ref: /schemas/reset/brcm,bcm4908-misc-pcie-reset.yaml additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml index 3b3beab9db..2451d0f0e4 100644 --- a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml @@ -36,7 +36,7 @@ properties: clock-controller: # Child node type: object - $ref: ../clock/canaan,k210-clk.yaml + $ref: /schemas/clock/canaan,k210-clk.yaml description: Clock controller for the SoC clocks. This child node definition should follow the bindings specified in @@ -45,7 +45,7 @@ properties: reset-controller: # Child node type: object - $ref: ../reset/canaan,k210-rst.yaml + $ref: /schemas/reset/canaan,k210-rst.yaml description: Reset controller for the SoC. This child node definition should follow the bindings specified in @@ -54,7 +54,7 @@ properties: syscon-reboot: # Child node type: object - $ref: ../power/reset/syscon-reboot.yaml + $ref: /schemas/power/reset/syscon-reboot.yaml description: Reboot method for the SoC. This child node definition should follow the bindings specified in diff --git a/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml index f6967c1f62..d3b79140cc 100644 --- a/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml +++ b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml @@ -42,10 +42,10 @@ required: patternProperties: "^gpio(@[0-9a-f]+)?$": - $ref: ../gpio/delta,tn48m-gpio.yaml + $ref: /schemas/gpio/delta,tn48m-gpio.yaml "^reset-controller?$": - $ref: ../reset/delta,tn48m-reset.yaml + $ref: /schemas/reset/delta,tn48m-reset.yaml additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml index f438c23749..e79ce447a8 100644 --- a/Documentation/devicetree/bindings/mfd/iqs62x.yaml +++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml @@ -38,10 +38,10 @@ properties: device name with ".bin" as the extension (e.g. iqs620a.bin for IQS620A). keys: - $ref: ../input/iqs62x-keys.yaml + $ref: /schemas/input/iqs62x-keys.yaml pwm: - $ref: ../pwm/iqs620a-pwm.yaml + $ref: /schemas/pwm/iqs620a-pwm.yaml required: - compatible diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml index eb3b43547c..37207a97e0 100644 --- a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml +++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml @@ -39,19 +39,19 @@ properties: patternProperties: "^gpio(@[0-9a-f]+)?$": - $ref: ../gpio/kontron,sl28cpld-gpio.yaml + $ref: /schemas/gpio/kontron,sl28cpld-gpio.yaml "^hwmon(@[0-9a-f]+)?$": - $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml + $ref: /schemas/hwmon/kontron,sl28cpld-hwmon.yaml "^interrupt-controller(@[0-9a-f]+)?$": - $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml + $ref: /schemas/interrupt-controller/kontron,sl28cpld-intc.yaml "^pwm(@[0-9a-f]+)?$": - $ref: ../pwm/kontron,sl28cpld-pwm.yaml + $ref: /schemas/pwm/kontron,sl28cpld-pwm.yaml "^watchdog(@[0-9a-f]+)?$": - $ref: ../watchdog/kontron,sl28cpld-wdt.yaml + $ref: /schemas/watchdog/kontron,sl28cpld-wdt.yaml required: - "#address-cells" diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt deleted file mode 100644 index ae9cf39bd1..0000000000 --- a/Documentation/devicetree/bindings/mfd/lp873x.txt +++ /dev/null @@ -1,67 +0,0 @@ -TI LP873X PMIC MFD driver - -Required properties: - - compatible: "ti,lp8732", "ti,lp8733" - - reg: I2C slave address. - - gpio-controller: Marks the device node as a GPIO Controller. - - #gpio-cells: Should be two. The first cell is the pin number and - the second cell is used to specify flags. - See ../gpio/gpio.txt for more information. - - xxx-in-supply: Phandle to parent supply node of each regulator - populated under regulators node. xxx can be - buck0, buck1, ldo0 or ldo1. - - regulators: List of child nodes that specify the regulator - initialization data. -Example: - -pmic: lp8733@60 { - compatible = "ti,lp8733"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - - buck0-in-supply = <&vsys_3v3>; - buck1-in-supply = <&vsys_3v3>; - ldo0-in-supply = <&vsys_3v3>; - ldo1-in-supply = <&vsys_3v3>; - - regulators { - lp8733_buck0: buck0 { - regulator-name = "lp8733-buck0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-min-microamp = <1500000>; - regulator-max-microamp = <4000000>; - regulator-ramp-delay = <10000>; - regulator-always-on; - regulator-boot-on; - }; - - lp8733_buck1: buck1 { - regulator-name = "lp8733-buck1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-min-microamp = <1500000>; - regulator-max-microamp = <4000000>; - regulator-ramp-delay = <10000>; - regulator-boot-on; - regulator-always-on; - }; - - lp8733_ldo0: ldo0 { - regulator-name = "lp8733-ldo0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - lp8733_ldo1: ldo1 { - regulator-name = "lp8733-ldo1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml index 4181174fcf..d93d84171a 100644 --- a/Documentation/devicetree/bindings/mfd/max77650.yaml +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml @@ -53,16 +53,16 @@ properties: Single string containing the name of the GPIO line. regulators: - $ref: ../regulator/max77650-regulator.yaml + $ref: /schemas/regulator/max77650-regulator.yaml charger: - $ref: ../power/supply/max77650-charger.yaml + $ref: /schemas/power/supply/max77650-charger.yaml leds: - $ref: ../leds/leds-max77650.yaml + $ref: /schemas/leds/leds-max77650.yaml onkey: - $ref: ../input/max77650-onkey.yaml + $ref: /schemas/input/max77650-onkey.yaml required: - compatible diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml index d027aabe45..c13d51e462 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml @@ -35,7 +35,7 @@ properties: maxItems: 1 voltage-regulators: - $ref: ../regulator/maxim,max77686.yaml + $ref: /schemas/regulator/maxim,max77686.yaml description: List of child nodes that specify the regulators. diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml index 6a6f222b86..cce273ba40 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml @@ -81,7 +81,7 @@ properties: - pwms regulators: - $ref: ../regulator/maxim,max77693.yaml + $ref: /schemas/regulator/maxim,max77693.yaml description: List of child nodes that specify the regulators. diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index 8103fb61a1..b7f01cbb8f 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -160,6 +160,10 @@ patternProperties: type: object $ref: /schemas/nvmem/qcom,spmi-sdam.yaml# + "^pbs@[0-9a-f]+$": + type: object + $ref: /schemas/soc/qcom/qcom,pbs.yaml# + "phy@[0-9a-f]+$": type: object $ref: /schemas/phy/qcom,snps-eusb2-repeater.yaml# diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml index b97d770153..c6bd14ec5a 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml @@ -28,6 +28,7 @@ properties: - qcom,sdm845-tcsr - qcom,sdx55-tcsr - qcom,sdx65-tcsr + - qcom,sdx75-tcsr - qcom,sm4450-tcsr - qcom,sm6115-tcsr - qcom,sm8150-tcsr diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml index 7fe3875a59..63e18d6a9c 100644 --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml @@ -19,6 +19,7 @@ properties: - enum: - qcom,pm8058 - qcom,pm8821 + - qcom,pm8901 - qcom,pm8921 - items: - enum: diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml index 4762eb1439..e3ccba177b 100644 --- a/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml +++ b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml @@ -37,10 +37,10 @@ properties: maxItems: 1 regulators: - $ref: ../regulator/richtek,rt4831-regulator.yaml + $ref: /schemas/regulator/richtek,rt4831-regulator.yaml backlight: - $ref: ../leds/backlight/richtek,rt4831-backlight.yaml + $ref: /schemas/leds/backlight/richtek,rt4831-backlight.yaml required: - compatible diff --git a/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml index 032a7fb0b4..e3d64307b5 100644 --- a/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml +++ b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml @@ -28,7 +28,7 @@ allOf: regulators: patternProperties: "^(DCDC[1-4]|LDO[1-5]|LDORTC[12])$": - $ref: ../regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml additionalProperties: false - if: properties: @@ -40,7 +40,7 @@ allOf: regulators: patternProperties: "^(DCDC[1-3]|LDO[1-5]|LDORTC[12])$": - $ref: ../regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml additionalProperties: false - if: properties: @@ -52,7 +52,7 @@ allOf: regulators: patternProperties: "^(DCDC[1-5]|LDO[1-9]|LDO10|LDORTC[12])$": - $ref: ../regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml additionalProperties: false properties: diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml index 44f8188360..da2391530c 100644 --- a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml @@ -82,7 +82,7 @@ properties: patternProperties: "^(DCDC_REG[1-4]|LDO_REG[1-3])$": type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml index d2ac6fbd5c..50dfffac8f 100644 --- a/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml @@ -109,7 +109,7 @@ properties: patternProperties: "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$": type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk816.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk816.yaml new file mode 100644 index 0000000000..0676890f10 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk816.yaml @@ -0,0 +1,274 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk816.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK816 Power Management Integrated Circuit + +maintainers: + - Chris Zhong + - Zhang Qing + +description: + Rockchip RK816 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, a RTC, a GPIO controller, a power button, and a + battery charger manager with fuel gauge. + +properties: + compatible: + enum: + - rockchip,rk816 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See for clock IDs. + const: 1 + + clock-output-names: + maxItems: 2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + + vcc1-supply: + description: + The input supply for dcdc1. + + vcc2-supply: + description: + The input supply for dcdc2. + + vcc3-supply: + description: + The input supply for dcdc3. + + vcc4-supply: + description: + The input supply for dcdc4. + + vcc5-supply: + description: + The input supply for ldo1, ldo2, and ldo3. + + vcc6-supply: + description: + The input supply for ldo4, ldo5, and ldo6. + + vcc7-supply: + description: + The input supply for boost. + + vcc8-supply: + description: + The input supply for otg-switch. + + regulators: + type: object + patternProperties: + '^(boost|dcdc[1-4]|ldo[1-6]|otg-switch)$': + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + additionalProperties: false + +patternProperties: + '-pins$': + type: object + additionalProperties: false + $ref: /schemas/pinctrl/pinmux-node.yaml + + properties: + function: + enum: [gpio, thermistor] + + pins: + $ref: /schemas/types.yaml#/definitions/string + const: gpio0 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk816: pmic@1a { + compatible = "rockchip,rk816"; + reg = <0x1a>; + interrupt-parent = <&gpio0>; + interrupts = ; + clock-output-names = "xin32k", "rk816-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + gpio-controller; + system-power-controller; + wakeup-source; + #clock-cells = <1>; + #gpio-cells = <2>; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc33_io>; + vcc6-supply = <&vcc_sys>; + + regulators { + vdd_cpu: dcdc1 { + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <1>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic: dcdc2 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <1>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: dcdc3 { + regulator-name = "vcc_ddr"; + regulator-initial-mode = <1>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc33_io: dcdc4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_io"; + regulator-initial-mode = <1>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_pmu: ldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_pmu"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_tp: ldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_tp"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_10: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc18_lcd: ldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd10_lcd: ldo6 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + + rk816_gpio_pins: gpio-pins { + function = "gpio"; + pins = "gpio0"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml index 92b1592e89..8c2fd0fabb 100644 --- a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml @@ -91,7 +91,7 @@ properties: "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$": type: object unevaluatedProperties: false - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false clocks: diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml index fd4b9de364..90d944c27b 100644 --- a/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml @@ -101,7 +101,7 @@ properties: patternProperties: "^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$": type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml index 05747e0125..bb81307dc1 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml @@ -61,7 +61,7 @@ properties: default: 30000000 regulators: - $ref: ../regulator/rohm,bd71815-regulator.yaml + $ref: /schemas/regulator/rohm,bd71815-regulator.yaml description: List of child nodes that specify the regulators. diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml index 11089aa89e..fa17686a64 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml @@ -17,7 +17,12 @@ description: | properties: compatible: - const: rohm,bd71828 + oneOf: + - const: rohm,bd71828 + + - items: + - const: rohm,bd71879 + - const: rohm,bd71828 reg: description: @@ -60,12 +65,12 @@ properties: here in Ohms. regulators: - $ref: ../regulator/rohm,bd71828-regulator.yaml + $ref: /schemas/regulator/rohm,bd71828-regulator.yaml description: List of child nodes that specify the regulators. leds: - $ref: ../leds/rohm,bd71828-leds.yaml + $ref: /schemas/leds/rohm,bd71828-leds.yaml gpio-reserved-ranges: description: | @@ -73,6 +78,8 @@ properties: used to mark the pins which should not be configured for GPIO. Please see the ../gpio/gpio.txt for more information. + system-power-controller: true + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml index 7aa343f58c..08f958dc70 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml @@ -109,7 +109,7 @@ properties: - 14000 regulators: - $ref: ../regulator/rohm,bd71837-regulator.yaml + $ref: /schemas/regulator/rohm,bd71837-regulator.yaml description: List of child nodes that specify the regulators. diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml index 89f9efee46..534cf03f36 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml @@ -67,7 +67,7 @@ properties: patternProperties: "^(vd09|vd18|vd25|vd33|dvfs)$": type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# properties: regulator-name: diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml index b7b323b1a4..70fd9b5e4c 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml @@ -71,7 +71,7 @@ properties: # (HW) minimum for max timeout is 4ms, maximum 4416 ms. regulators: - $ref: ../regulator/rohm,bd9576-regulator.yaml + $ref: /schemas/regulator/rohm,bd9576-regulator.yaml description: List of child nodes that specify the regulators. diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml index 055dfc337c..ad92eb6fcd 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml @@ -27,7 +27,7 @@ properties: maxItems: 1 regulators: - $ref: ../regulator/samsung,s2mpa01.yaml + $ref: /schemas/regulator/samsung,s2mpa01.yaml description: List of child nodes that specify the regulators. diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml index 5ff6546c72..bc8b5940b1 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml @@ -27,7 +27,7 @@ properties: - samsung,s2mpu02-pmic clocks: - $ref: ../clock/samsung,s2mps11.yaml + $ref: /schemas/clock/samsung,s2mps11.yaml description: Child node describing clock provider. @@ -75,7 +75,7 @@ allOf: then: properties: regulators: - $ref: ../regulator/samsung,s2mps11.yaml + $ref: /schemas/regulator/samsung,s2mps11.yaml samsung,s2mps11-wrstbi-ground: false - if: @@ -86,7 +86,7 @@ allOf: then: properties: regulators: - $ref: ../regulator/samsung,s2mps13.yaml + $ref: /schemas/regulator/samsung,s2mps13.yaml samsung,s2mps11-acokb-ground: false - if: @@ -97,7 +97,7 @@ allOf: then: properties: regulators: - $ref: ../regulator/samsung,s2mps14.yaml + $ref: /schemas/regulator/samsung,s2mps14.yaml samsung,s2mps11-acokb-ground: false samsung,s2mps11-wrstbi-ground: false @@ -109,7 +109,7 @@ allOf: then: properties: regulators: - $ref: ../regulator/samsung,s2mps15.yaml + $ref: /schemas/regulator/samsung,s2mps15.yaml samsung,s2mps11-acokb-ground: false samsung,s2mps11-wrstbi-ground: false @@ -121,7 +121,7 @@ allOf: then: properties: regulators: - $ref: ../regulator/samsung,s2mpu02.yaml + $ref: /schemas/regulator/samsung,s2mpu02.yaml samsung,s2mps11-acokb-ground: false samsung,s2mps11-wrstbi-ground: false diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml index aea0b7d57d..249248078c 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml @@ -21,7 +21,7 @@ properties: const: samsung,s5m8767-pmic clocks: - $ref: ../clock/samsung,s2mps11.yaml + $ref: /schemas/clock/samsung,s2mps11.yaml description: Child node describing clock provider. @@ -32,7 +32,7 @@ properties: maxItems: 1 regulators: - $ref: ../regulator/samsung,s5m8767.yaml + $ref: /schemas/regulator/samsung,s5m8767.yaml description: List of child nodes that specify the regulators. diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml index 27329c5dc3..d413088564 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml @@ -44,6 +44,10 @@ properties: wakeup-source: true + access-controllers: + minItems: 1 + maxItems: 2 + pwm: type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml index f84e09a574..b0e438ff49 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml @@ -67,6 +67,10 @@ properties: "#size-cells": const: 0 + access-controllers: + minItems: 1 + maxItems: 2 + pwm: type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml index 76551c90b1..61daf36b3c 100644 --- a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml @@ -60,7 +60,7 @@ properties: additionalProperties: false allOf: - - $ref: ../pinctrl/pinmux-node.yaml + - $ref: /schemas/pinctrl/pinmux-node.yaml properties: pins: true diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml index b17ebeb0a4..e822817188 100644 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -29,7 +29,7 @@ properties: onkey: type: object - $ref: ../input/input.yaml + $ref: /schemas/input/input.yaml properties: compatible: @@ -67,7 +67,7 @@ properties: watchdog: type: object - $ref: ../watchdog/watchdog.yaml + $ref: /schemas/watchdog/watchdog.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml index 94f9767a92..b2cfa4120b 100644 --- a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml +++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml @@ -126,7 +126,7 @@ properties: patternProperties: "^channel@[0-9a-f]+$": type: object - $ref: ../iio/adc/adc.yaml# + $ref: /schemas/iio/adc/adc.yaml# description: Represents each of the external channels which are connected to the ADC. @@ -180,22 +180,22 @@ properties: ab8500_fg: description: Node describing the AB8500 fuel gauge control block. type: object - $ref: ../power/supply/stericsson,ab8500-fg.yaml + $ref: /schemas/power/supply/stericsson,ab8500-fg.yaml ab8500_btemp: description: Node describing the AB8500 battery temperature control block. type: object - $ref: ../power/supply/stericsson,ab8500-btemp.yaml + $ref: /schemas/power/supply/stericsson,ab8500-btemp.yaml ab8500_charger: description: Node describing the AB8500 battery charger control block. type: object - $ref: ../power/supply/stericsson,ab8500-charger.yaml + $ref: /schemas/power/supply/stericsson,ab8500-charger.yaml ab8500_chargalg: description: Node describing the AB8500 battery charger algorithm. type: object - $ref: ../power/supply/stericsson,ab8500-chargalg.yaml + $ref: /schemas/power/supply/stericsson,ab8500-chargalg.yaml phy: description: Node describing the AB8500 USB PHY control block. @@ -339,40 +339,40 @@ properties: ab8500_ldo_aux1: description: The voltage for the auxiliary LDO regulator 1 type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux2: description: The voltage for the auxiliary LDO regulator 2 type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux3: description: The voltage for the auxiliary LDO regulator 3 type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux4: description: The voltage for the auxiliary LDO regulator 4 only present on AB8505 type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux5: description: The voltage for the auxiliary LDO regulator 5 only present on AB8505 type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux6: description: The voltage for the auxiliary LDO regulator 6 only present on AB8505 type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false # There is never any AUX7 regulator which is confusing @@ -381,21 +381,21 @@ properties: description: The voltage for the auxiliary LDO regulator 8 only present on AB8505 type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_intcore: description: The LDO regulator for the internal core voltage of the AB8500 type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_adc: description: Analog power regulator for the analog to digital converter ADC, only present on AB8505 type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_tvout: @@ -404,39 +404,39 @@ properties: the temperature of the NTC thermistor on the battery. Only present on AB8500. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_audio: description: The LDO regulator for the audio codec output type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_anamic1: description: The LDO regulator for the analog microphone 1 type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_anamic2: description: The LDO regulator for the analog microphone 2 type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_dmic: description: The LDO regulator for the digital microphone only present on AB8500 type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_ana: description: Analog power regulator for CSI and DSI interfaces, Camera Serial Interface CSI and Display Serial Interface DSI. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false required: @@ -459,19 +459,19 @@ properties: ab8500_ext1: description: The voltage for the VSMPS1 external regulator type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false ab8500_ext2: description: The voltage for the VSMPS2 external regulator type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false ab8500_ext3: description: The voltage for the VSMPS3 external regulator type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false required: @@ -482,7 +482,7 @@ properties: patternProperties: "^pwm@[1-9]+?$": type: object - $ref: ../pwm/pwm.yaml# + $ref: /schemas/pwm/pwm.yaml# unevaluatedProperties: false description: Represents each of the PWM blocks in the AB8500 diff --git a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml index cb2a42caab..d6c13779d4 100644 --- a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml +++ b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml @@ -71,52 +71,52 @@ properties: description: The voltage for the application processor, the main voltage domain for the chip. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_varm: description: The voltage for the ARM Cortex-A9 CPU. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_vmodem: description: The voltage for the modem subsystem. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_vpll: description: The voltage for the phase locked loop clocks. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_vsmps1: description: Also known as VIO12, is a step-down voltage regulator for 1.2V I/O. SMPS means System Management Power Source. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_vsmps2: description: Also known as VIO18, is a step-down voltage regulator for 1.8V I/O. SMPS means System Management Power Source. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_vsmps3: description: This is a step-down voltage regulator for 0.87 thru 1.875V I/O. SMPS means System Management Power Source. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_vrf1: description: RF transceiver voltage regulator. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_sva_mmdsp: @@ -124,21 +124,21 @@ properties: voltage regulator. This is the voltage for the accelerator DSP for video encoding and decoding. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_sva_mmdsp_ret: description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) voltage regulator for retention mode. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_sva_pipe: description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) voltage regulator for the data pipe. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_sia_mmdsp: @@ -146,21 +146,21 @@ properties: voltage regulator. This is the voltage for the accelerator DSP for image encoding and decoding. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_sia_mmdsp_ret: description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) voltage regulator for retention mode. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_sia_pipe: description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) voltage regulator for the data pipe. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_sga: @@ -168,7 +168,7 @@ properties: This is in effect controlling the power to the MALI400 3D accelerator block. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_b2r2_mcde: @@ -176,33 +176,33 @@ properties: Display Engine (MCDE) voltage regulator. These are two graphics blocks. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_esram12: description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_esram12_ret: description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator for retention mode. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_esram34: description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false db8500_esram34_ret: description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator for retention mode. type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false required: diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 9d55bee155..7ed12a938b 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -38,11 +38,20 @@ properties: - allwinner,sun8i-h3-system-controller - allwinner,sun8i-v3s-system-controller - allwinner,sun50i-a64-system-controller + - altr,sdr-ctl - amd,pensando-elba-syscon + - apm,xgene-csw + - apm,xgene-efuse + - apm,xgene-mcb + - apm,xgene-rb + - apm,xgene-scu - brcm,cru-clkset + - brcm,sr-cdru + - brcm,sr-mhb - freecom,fsg-cs2-system-controller - fsl,imx93-aonmix-ns-syscfg - fsl,imx93-wakeupmix-syscfg + - fsl,ls1088a-reset - hisilicon,dsa-subctrl - hisilicon,hi6220-sramctrl - hisilicon,pcie-sas-subctrl @@ -51,9 +60,15 @@ properties: - intel,lgm-syscon - loongson,ls1b-syscon - loongson,ls1c-syscon + - marvell,armada-3700-cpu-misc + - marvell,armada-3700-nb-pm + - marvell,armada-3700-avs - marvell,armada-3700-usb2-host-misc + - mediatek,mt2712-pctl-a-syscfg + - mediatek,mt6397-pctl-pmic-syscfg - mediatek,mt8135-pctl-a-syscfg - mediatek,mt8135-pctl-b-syscfg + - mediatek,mt8173-pctl-a-syscfg - mediatek,mt8365-syscfg - microchip,lan966x-cpu-syscon - microchip,sparx5-cpu-syscon @@ -73,6 +88,7 @@ properties: - rockchip,rv1126-qos - starfive,jh7100-sysmain - ti,am62-usb-phy-ctrl + - ti,am62p-cpsw-mac-efuse - ti,am654-dss-oldi-io-ctrl - ti,am654-serdes-ctrl - ti,j784s4-pcie-ctrl diff --git a/Documentation/devicetree/bindings/mfd/ti,lp8732.yaml b/Documentation/devicetree/bindings/mfd/ti,lp8732.yaml new file mode 100644 index 0000000000..9a90cee2b5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,lp8732.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,lp8732.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LP873X Power Management Integrated Circuit + +maintainers: + - J Keerthy + +description: + PMIC with two high-current buck converters and two linear regulators. + +properties: + compatible: + enum: + - ti,lp8732 + - ti,lp8733 + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + regulators: + description: + List of child nodes that specify the regulator initialization data. + type: object + patternProperties: + "^buck[01]|ldo[01]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + additionalProperties: false + +patternProperties: + '^(buck[01]|ldo[01])-in-supply$': + description: Phandle to parent supply of each regulator populated under regulators node. + +required: + - compatible + - reg + - regulators + - buck0-in-supply + - buck1-in-supply + - ldo0-in-supply + - ldo1-in-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic: pmic@60 { + compatible = "ti,lp8733"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + + buck0-in-supply = <&vsys_3v3>; + buck1-in-supply = <&vsys_3v3>; + ldo0-in-supply = <&vsys_3v3>; + ldo1-in-supply = <&vsys_3v3>; + + regulators { + buck0: buck0 { + regulator-name = "buck0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-min-microamp = <1500000>; + regulator-max-microamp = <4000000>; + regulator-ramp-delay = <10000>; + regulator-always-on; + regulator-boot-on; + }; + + buck1: buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-min-microamp = <1500000>; + regulator-max-microamp = <4000000>; + regulator-ramp-delay = <10000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0: ldo0 { + regulator-name = "ldo0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml index bd36a07c17..a8eed9065d 100644 --- a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml @@ -49,7 +49,7 @@ properties: patternProperties: "^buck[1-6]$": type: object - $ref: ../regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml properties: regulator-name: true @@ -72,7 +72,7 @@ properties: "^(ldoa[1-3]|swa1|swb[1-2]|vtt)$": type: object - $ref: ../regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml properties: regulator-name: true diff --git a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml index 9d43376beb..6341b60703 100644 --- a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml @@ -21,6 +21,7 @@ properties: - ti,lp8764-q1 - ti,tps6593-q1 - ti,tps6594-q1 + - ti,tps65224-q1 reg: description: I2C slave address or SPI chip select number. diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml index 52ed228fb1..c2357fecb5 100644 --- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml @@ -15,6 +15,67 @@ description: | USB transceiver or Audio amplifier. These chips are connected to an i2c bus. +allOf: + - if: + properties: + compatible: + contains: + const: ti,twl4030 + then: + properties: + madc: + type: object + $ref: /schemas/iio/adc/ti,twl4030-madc.yaml + unevaluatedProperties: false + + bci: + type: object + $ref: /schemas/power/supply/twl4030-charger.yaml + unevaluatedProperties: false + + pwrbutton: + type: object + additionalProperties: false + properties: + compatible: + const: ti,twl4030-pwrbutton + interrupts: + items: + - items: + const: 8 + + watchdog: + type: object + additionalProperties: false + properties: + compatible: + const: ti,twl4030-wdt + + - if: + properties: + compatible: + contains: + const: ti,twl6030 + then: + properties: + gpadc: + type: object + properties: + compatible: + const: ti,twl6030-gpadc + - if: + properties: + compatible: + contains: + const: ti,twl6032 + then: + properties: + gpadc: + type: object + properties: + compatible: + const: ti,twl6032-gpadc + properties: compatible: description: @@ -42,7 +103,16 @@ properties: "#clock-cells": const: 1 -additionalProperties: false + rtc: + type: object + additionalProperties: false + properties: + compatible: + const: ti,twl4030-rtc + interrupts: + maxItems: 1 + +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml index 06f1779835..b8e8db0d58 100644 --- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml +++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml @@ -83,6 +83,7 @@ allOf: enum: - x-powers,axp313a - x-powers,axp15060 + - x-powers,axp717 then: properties: @@ -99,6 +100,7 @@ properties: - x-powers,axp221 - x-powers,axp223 - x-powers,axp313a + - x-powers,axp717 - x-powers,axp803 - x-powers,axp806 - x-powers,axp809 diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml index 940b126881..8f62e2c7fa 100644 --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml @@ -79,6 +79,10 @@ properties: - const: rx - const: tx + access-controllers: + minItems: 1 + maxItems: 2 + power-domains: true resets: diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index 82f7ee8702..b9b9995705 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -91,6 +91,9 @@ properties: - enum: - fsl,imxrt1170-usdhc - const: fsl,imxrt1050-usdhc + - items: + - const: nxp,s32g3-usdhc + - const: nxp,s32g2-usdhc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml index 29f2400247..3d0e61e598 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml @@ -12,16 +12,13 @@ maintainers: properties: compatible: oneOf: - - items: - - const: renesas,sdhi-sh73a0 # R-Mobile APE6 - - items: - - const: renesas,sdhi-r7s72100 # RZ/A1H - - items: - - const: renesas,sdhi-r7s9210 # SH-Mobile AG5 - - items: - - const: renesas,sdhi-r8a73a4 # R-Mobile APE6 - - items: - - const: renesas,sdhi-r8a7740 # R-Mobile A1 + - enum: + - renesas,sdhi-mmc-r8a77470 # RZ/G1C + - renesas,sdhi-r7s72100 # RZ/A1H + - renesas,sdhi-r7s9210 # SH-Mobile AG5 + - renesas,sdhi-r8a73a4 # R-Mobile APE6 + - renesas,sdhi-r8a7740 # R-Mobile A1 + - renesas,sdhi-sh73a0 # R-Mobile APE6 - items: - enum: - renesas,sdhi-r8a7778 # R-Car M1 @@ -40,8 +37,6 @@ properties: - renesas,sdhi-r8a7793 # R-Car M2-N - renesas,sdhi-r8a7794 # R-Car E2 - const: renesas,rcar-gen2-sdhi # R-Car Gen2 and RZ/G1 - - items: - - const: renesas,sdhi-mmc-r8a77470 # RZ/G1C (SDHI/MMC IP) - items: - enum: - renesas,sdhi-r8a774a1 # RZ/G2M @@ -56,11 +51,6 @@ properties: - renesas,sdhi-r8a77980 # R-Car V3H - renesas,sdhi-r8a77990 # R-Car E3 - renesas,sdhi-r8a77995 # R-Car D3 - - renesas,sdhi-r9a07g043 # RZ/G2UL and RZ/Five - - renesas,sdhi-r9a07g044 # RZ/G2{L,LC} - - renesas,sdhi-r9a07g054 # RZ/V2L - - renesas,sdhi-r9a08g045 # RZ/G3S - - renesas,sdhi-r9a09g011 # RZ/V2M - const: renesas,rcar-gen3-sdhi # R-Car Gen3 or RZ/G2 - items: - enum: @@ -69,6 +59,14 @@ properties: - renesas,sdhi-r8a779g0 # R-Car V4H - renesas,sdhi-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-sdhi # R-Car Gen4 + - items: + - enum: + - renesas,sdhi-r9a07g043 # RZ/G2UL and RZ/Five + - renesas,sdhi-r9a07g044 # RZ/G2{L,LC} + - renesas,sdhi-r9a07g054 # RZ/V2L + - renesas,sdhi-r9a08g045 # RZ/G3S + - renesas,sdhi-r9a09g011 # RZ/V2M + - const: renesas,rzg2l-sdhi reg: maxItems: 1 @@ -120,12 +118,7 @@ allOf: properties: compatible: contains: - enum: - - renesas,sdhi-r9a07g043 - - renesas,sdhi-r9a07g044 - - renesas,sdhi-r9a07g054 - - renesas,sdhi-r9a08g045 - - renesas,sdhi-r9a09g011 + const: renesas,rzg2l-sdhi then: properties: clocks: diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml index ee442ecb11..bbb56216a4 100644 --- a/Documentation/devicetree/bindings/mtd/mtd.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd.yaml @@ -48,8 +48,8 @@ patternProperties: type: object allOf: - - $ref: ../nvmem/nvmem.yaml# - - $ref: ../nvmem/nvmem-deprecated-cells.yaml# + - $ref: /schemas/nvmem/nvmem.yaml# + - $ref: /schemas/nvmem/nvmem-deprecated-cells.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/mtd/partitions/binman.yaml b/Documentation/devicetree/bindings/mtd/partitions/binman.yaml new file mode 100644 index 0000000000..bb4b085461 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/binman.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/binman.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binman entries + +description: | + This corresponds to a binman 'entry'. It is a single partition which holds + data of a defined type. + + Binman uses the type to indicate what data file / type to place in the + partition. There are quite a number of binman-specific entry types, such as + section, fill and files, to be added later. + +maintainers: + - Simon Glass + +allOf: + - $ref: /schemas/mtd/partitions/partition.yaml# + +properties: + compatible: + enum: + - u-boot # u-boot.bin from U-Boot project + - tfa-bl31 # bl31.bin or bl31.elf from TF-A project + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@100000 { + compatible = "u-boot"; + reg = <0x100000 0xf00000>; + align-size = <0x1000>; + align-end = <0x10000>; + }; + + partition@200000 { + compatible = "tfa-bl31"; + reg = <0x200000 0x100000>; + align = <0x4000>; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml index 1ebe9e2347..80d0452a2a 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml @@ -57,6 +57,57 @@ properties: user space from type: boolean + align: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 2 + maximum: 0x80000000 + multipleOf: 2 + description: + This sets the alignment of the entry in bytes. + + The entry offset is adjusted so that the entry starts on an aligned + boundary within the containing section or image. For example ‘align = + <16>’ means that the entry will start on a 16-byte boundary. This may + mean that padding is added before the entry. The padding is part of + the containing section but is not included in the entry, meaning that + an empty space may be created before the entry starts. Alignment + must be a power of 2. If ‘align’ is not provided, no alignment is + performed. + + align-size: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 2 + maximum: 0x80000000 + multipleOf: 2 + description: + This sets the alignment of the entry size in bytes. It must be a power + of 2. + + For example, to ensure that the size of an entry is a multiple of 64 + bytes, set this to 64. While this does not affect the content of the + entry itself (the padding is performed only when its parent section is + assembled), the end result is that the entry ends with the padding + bytes, so may grow. If ‘align-size’ is not provided, no alignment is + performed. + + align-end: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 2 + maximum: 0x80000000 + multipleOf: 2 + description: + This sets the alignment (in bytes) of the end of an entry with respect + to the containing section. It must be a power of 2. + + Some entries require that they end on an alignment boundary, + regardless of where they start. This does not move the start of the + entry, so the content of the entry will still start at the beginning. + But there may be padding at the end. While this does not affect the + content of the entry itself (the padding is performed only when its + parent section is assembled), the end result is that the entry ends + with the padding bytes, so may grow. If ‘align-end’ is not provided, + no alignment is performed. + if: not: required: [ reg ] @@ -67,3 +118,24 @@ then: # This is a generic file other binding inherit from and extend additionalProperties: true + +examples: + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@100000 { + compatible = "u-boot"; + reg = <0x100000 0xf00000>; + align-size = <0x1000>; + align-end = <0x10000>; + }; + + partition@200000 { + compatible = "tfa-bl31"; + reg = <0x200000 0x100000>; + align = <0x4000>; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/samsung,s5pv210-onenand.yaml b/Documentation/devicetree/bindings/mtd/samsung,s5pv210-onenand.yaml new file mode 100644 index 0000000000..e07941b699 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/samsung,s5pv210-onenand.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/samsung,s5pv210-onenand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5Pv210 SoC OneNAND Controller + +maintainers: + - Krzysztof Kozlowski + +properties: + compatible: + enum: + - samsung,s5pv210-onenand + + reg: + items: + - description: Control registers + - description: OneNAND interface nCE[0] + - description: OneNAND interface nCE[1] + + clocks: + maxItems: 2 + + clock-names: + items: + - const: bus + - const: onenand + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +allOf: + - $ref: nand-controller.yaml + +unevaluatedProperties: false + +examples: + - | + #include + + nand-controller@b0600000 { + compatible = "samsung,s5pv210-onenand"; + reg = <0xb0600000 0x2000>, + <0xb0000000 0x20000>, + <0xb0040000 0x20000>; + clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>; + clock-names = "bus", "onenand"; + interrupt-parent = <&vic1>; + interrupts = <31>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/airoha,en8811h.yaml b/Documentation/devicetree/bindings/net/airoha,en8811h.yaml new file mode 100644 index 0000000000..ecb5149ec6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/airoha,en8811h.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/airoha,en8811h.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Airoha EN8811H PHY + +maintainers: + - Eric Woudstra + +description: + The Airoha EN8811H PHY has the ability to reverse polarity + on the lines to and/or from the MAC. It is reversed by + the booleans in the devicetree node of the phy. + +allOf: + - $ref: ethernet-phy.yaml# + +properties: + compatible: + enum: + - ethernet-phy-id03a2.a411 + + reg: + maxItems: 1 + + airoha,pnswap-rx: + type: boolean + description: + Reverse rx polarity of the SERDES. This is the receiving + side of the lines from the MAC towards the EN881H. + + airoha,pnswap-tx: + type: boolean + description: + Reverse tx polarity of SERDES. This is the transmitting + side of the lines from EN8811H towards the MAC. + +required: + - reg + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + compatible = "ethernet-phy-id03a2.a411"; + reg = <1>; + airoha,pnswap-rx; + }; + }; diff --git a/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml new file mode 100644 index 0000000000..67ff7caad5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/bluetooth/mediatek,mt7921s-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7921S Bluetooth + +maintainers: + - Sean Wang + +description: + MT7921S is an SDIO-attached dual-radio WiFi+Bluetooth Combo chip; each + function is its own SDIO function on a shared SDIO interface. The chip + has two dedicated reset lines, one for each function core. + This binding only covers the Bluetooth SDIO function, with one device + node describing only this SDIO function. + +allOf: + - $ref: bluetooth-controller.yaml# + +properties: + compatible: + enum: + - mediatek,mt7921s-bluetooth + + reg: + const: 2 + + reset-gpios: + maxItems: 1 + description: + An active-low reset line for the Bluetooth core; on typical M.2 + key E modules this is the W_DISABLE2# pin. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + + mmc { + #address-cells = <1>; + #size-cells = <0>; + + bluetooth@2 { + compatible = "mediatek,mt7921s-bluetooth"; + reg = <2>; + reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml index cc70b00c6c..4a1bfc2b35 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml @@ -14,20 +14,25 @@ description: properties: compatible: - enum: - - brcm,bcm20702a1 - - brcm,bcm4329-bt - - brcm,bcm4330-bt - - brcm,bcm4334-bt - - brcm,bcm43430a0-bt - - brcm,bcm43430a1-bt - - brcm,bcm43438-bt - - brcm,bcm4345c5 - - brcm,bcm43540-bt - - brcm,bcm4335a0 - - brcm,bcm4349-bt - - cypress,cyw4373a0-bt - - infineon,cyw55572-bt + oneOf: + - items: + - enum: + - infineon,cyw43439-bt + - const: brcm,bcm4329-bt + - enum: + - brcm,bcm20702a1 + - brcm,bcm4329-bt + - brcm,bcm4330-bt + - brcm,bcm4334-bt + - brcm,bcm43430a0-bt + - brcm,bcm43430a1-bt + - brcm,bcm43438-bt + - brcm,bcm4345c5 + - brcm,bcm43540-bt + - brcm,bcm4335a0 + - brcm,bcm4349-bt + - cypress,cyw4373a0-bt + - infineon,cyw55572-bt shutdown-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index f9ffb963d6..c4887522e8 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -118,6 +118,10 @@ properties: phys: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml index c80c880a9d..60aaf30d68 100644 --- a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml +++ b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml @@ -128,7 +128,6 @@ required: - cell-index - reg - fsl,fman-ports - - ptp-timer dependencies: pcs-handle-names: diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml index 4c01cae7c9..87bc4416ea 100644 --- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml @@ -66,6 +66,10 @@ properties: Should be phandle/offset pair. The phandle to the syscon node which encompases the GPR register, and the offset of the GPR register. + nvmem-cells: true + + nvmem-cell-names: true + snps,rmii_refclk_ext: $ref: /schemas/types.yaml#/definitions/flag description: diff --git a/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml b/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml new file mode 100644 index 0000000000..fd4244fcec --- /dev/null +++ b/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pse-pd/microchip,pd692x0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PD692x0 Power Sourcing Equipment controller + +maintainers: + - Kory Maincent + +allOf: + - $ref: pse-controller.yaml# + +properties: + compatible: + enum: + - microchip,pd69200 + - microchip,pd69210 + - microchip,pd69220 + + reg: + maxItems: 1 + + managers: + type: object + additionalProperties: false + description: + List of the PD69208T4/PD69204T4/PD69208M PSE managers. Each manager + have 4 or 8 physical ports according to the chip version. No need to + specify the SPI chip select as it is automatically detected by the + PD692x0 PSE controller. The PSE managers have to be described from + the lowest chip select to the greatest one, which is the detection + behavior of the PD692x0 PSE controller. The PD692x0 support up to + 12 PSE managers which can expose up to 96 physical ports. All + physical ports available on a manager have to be described in the + incremental order even if they are not used. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + required: + - "#address-cells" + - "#size-cells" + + patternProperties: + "^manager@[0-9a-b]$": + type: object + additionalProperties: false + description: + PD69208T4/PD69204T4/PD69208M PSE manager exposing 4 or 8 physical + ports. + + properties: + reg: + description: + Incremental index of the PSE manager starting from 0, ranging + from lowest to highest chip select, up to 11. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + '^port@[0-7]$': + type: object + additionalProperties: false + + properties: + reg: + maxItems: 1 + + required: + - reg + + required: + - reg + - "#address-cells" + - "#size-cells" + +required: + - compatible + - reg + - pse-pis + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-pse@3c { + compatible = "microchip,pd69200"; + reg = <0x3c>; + + managers { + #address-cells = <1>; + #size-cells = <0>; + + manager@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + phys0: port@0 { + reg = <0>; + }; + + phys1: port@1 { + reg = <1>; + }; + + phys2: port@2 { + reg = <2>; + }; + + phys3: port@3 { + reg = <3>; + }; + }; + + manager@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + phys4: port@0 { + reg = <0>; + }; + + phys5: port@1 { + reg = <1>; + }; + + phys6: port@2 { + reg = <2>; + }; + + phys7: port@3 { + reg = <3>; + }; + }; + }; + + pse-pis { + #address-cells = <1>; + #size-cells = <0>; + + pse_pi0: pse-pi@0 { + reg = <0>; + #pse-cells = <0>; + pairset-names = "alternative-a", "alternative-b"; + pairsets = <&phys0>, <&phys1>; + polarity-supported = "MDI", "S"; + vpwr-supply = <&vpwr1>; + }; + pse_pi1: pse-pi@1 { + reg = <1>; + #pse-cells = <0>; + pairset-names = "alternative-a"; + pairsets = <&phys2>; + polarity-supported = "MDI"; + vpwr-supply = <&vpwr2>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml index 2d382faca0..a12cda8aa7 100644 --- a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml +++ b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml @@ -13,6 +13,7 @@ description: Binding for the Power Sourcing Equipment (PSE) as defined in the maintainers: - Oleksij Rempel + - Kory Maincent properties: $nodename: @@ -22,11 +23,105 @@ properties: description: Used to uniquely identify a PSE instance within an IC. Will be 0 on PSE nodes with only a single output and at least 1 on nodes - controlling several outputs. + controlling several outputs which are not described in the pse-pis + subnode. This property is deprecated, please use pse-pis instead. enum: [0, 1] -required: - - "#pse-cells" + pse-pis: + type: object + description: + Overview of the PSE PIs provided by the controller. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + required: + - "#address-cells" + - "#size-cells" + + patternProperties: + "^pse-pi@[0-9a-f]+$": + type: object + description: + PSE PI for power delivery via pairsets, compliant with IEEE + 802.3-2022, Section 145.2.4. Each pairset comprises a positive and + a negative VPSE pair, adhering to the pinout configurations + detailed in the standard. + See Documentation/networking/pse-pd/pse-pi.rst for details. + + properties: + reg: + description: + Address describing the PSE PI index. + maxItems: 1 + + "#pse-cells": + const: 0 + + pairset-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: + Names of the pairsets as per IEEE 802.3-2022, Section 145.2.4. + Each name should correspond to a phandle in the 'pairset' + property pointing to the power supply for that pairset. + minItems: 1 + maxItems: 2 + items: + enum: + - alternative-a + - alternative-b + + pairsets: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + List of phandles, each pointing to the power supply for the + corresponding pairset named in 'pairset-names'. This property + aligns with IEEE 802.3-2022, Section 33.2.3 and 145.2.4. + PSE Pinout Alternatives (as per IEEE 802.3-2022 Table 145\u20133) + |-----------|---------------|---------------|---------------|---------------| + | Conductor | Alternative A | Alternative A | Alternative B | Alternative B | + | | (MDI-X) | (MDI) | (X) | (S) | + |-----------|---------------|---------------|---------------|---------------| + | 1 | Negative VPSE | Positive VPSE | - | - | + | 2 | Negative VPSE | Positive VPSE | - | - | + | 3 | Positive VPSE | Negative VPSE | - | - | + | 4 | - | - | Negative VPSE | Positive VPSE | + | 5 | - | - | Negative VPSE | Positive VPSE | + | 6 | Positive VPSE | Negative VPSE | - | - | + | 7 | - | - | Positive VPSE | Negative VPSE | + | 8 | - | - | Positive VPSE | Negative VPSE | + minItems: 1 + maxItems: 2 + + polarity-supported: + $ref: /schemas/types.yaml#/definitions/string-array + description: + Polarity configuration supported by the PSE PI pairsets. + minItems: 1 + maxItems: 4 + items: + enum: + - MDI-X + - MDI + - X + - S + + vpwr-supply: + description: Regulator power supply for the PSE PI. + + required: + - reg + - "#pse-cells" + +oneOf: + - required: + - "#pse-cells" + - required: + - pse-pis additionalProperties: true diff --git a/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml b/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml new file mode 100644 index 0000000000..6992d56832 --- /dev/null +++ b/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pse-pd/ti,tps23881.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS23881 Power Sourcing Equipment controller + +maintainers: + - Kory Maincent + +allOf: + - $ref: pse-controller.yaml# + +properties: + compatible: + enum: + - ti,tps23881 + + reg: + maxItems: 1 + + '#pse-cells': + const: 1 + + channels: + description: each set of 8 ports can be assigned to one physical + channels or two for PoE4. This parameter describes the configuration + of the ports conversion matrix that establishes relationship between + the logical ports and the physical channels. + type: object + additionalProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + '^channel@[0-7]$': + type: object + additionalProperties: false + + properties: + reg: + maxItems: 1 + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-pse@20 { + compatible = "ti,tps23881"; + reg = <0x20>; + + channels { + #address-cells = <1>; + #size-cells = <0>; + + phys0: channel@0 { + reg = <0>; + }; + + phys1: channel@1 { + reg = <1>; + }; + + phys2: channel@2 { + reg = <2>; + }; + }; + + pse-pis { + #address-cells = <1>; + #size-cells = <0>; + + pse_pi0: pse-pi@0 { + reg = <0>; + #pse-cells = <0>; + pairset-names = "alternative-a", "alternative-b"; + pairsets = <&phys0>, <&phys1>; + polarity-supported = "MDI", "S"; + vpwr-supply = <&vpwr1>; + }; + + pse_pi1: pse-pi@1 { + reg = <1>; + #pse-cells = <0>; + pairset-names = "alternative-a"; + pairsets = <&phys2>; + polarity-supported = "MDI"; + vpwr-supply = <&vpwr2>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml index 69a337c7e3..6672327358 100644 --- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml @@ -61,6 +61,8 @@ properties: iommus: maxItems: 1 + dma-coherent: true + phys: true phy-names: diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml index 0029e197a8..a94480e819 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml @@ -20,6 +20,7 @@ properties: - enum: - qcom,ipq6018-mdio - qcom,ipq8074-mdio + - qcom,ipq9574-mdio - const: qcom,ipq4019-mdio "#address-cells": @@ -76,6 +77,7 @@ allOf: - qcom,ipq5018-mdio - qcom,ipq6018-mdio - qcom,ipq8074-mdio + - qcom,ipq9574-mdio then: required: - clocks diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index de7ba7f345..21a92f1790 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -88,10 +88,16 @@ properties: '#address-cells': description: Number of address cells for the MDIO bus. const: 1 + deprecated: true '#size-cells': description: Number of size cells on the MDIO bus. const: 0 + deprecated: true + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false renesas,no-ether-link: type: boolean @@ -110,9 +116,13 @@ properties: tx-internal-delay-ps: enum: [0, 2000] +# In older bindings there where no mdio child-node to describe the MDIO bus +# and the PHY. To not fail older bindings accept any node with an address. New +# users should describe the PHY inside the mdio child-node. patternProperties: "@[0-9a-f]$": type: object + deprecated: true required: - compatible @@ -123,8 +133,6 @@ required: - resets - phy-mode - phy-handle - - '#address-cells' - - '#size-cells' allOf: - $ref: ethernet-controller.yaml# diff --git a/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml b/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml index ea35d19be8..b4680a1d0a 100644 --- a/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml @@ -71,16 +71,8 @@ properties: enum: [0, 2000] default: 0 - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - -patternProperties: - "^ethernet-phy@[0-9a-f]$": - type: object - $ref: ethernet-phy.yaml# + mdio: + $ref: /schemas/net/mdio.yaml# unevaluatedProperties: false required: @@ -94,8 +86,7 @@ required: - resets - phy-mode - phy-handle - - '#address-cells' - - '#size-cells' + - mdio additionalProperties: false @@ -122,14 +113,18 @@ examples: tx-internal-delay-ps = <2000>; phy-handle = <&phy3>; - #address-cells = <1>; - #size-cells = <0>; + mdio { + #address-cells = <1>; + #size-cells = <0>; - phy3: ethernet-phy@3 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - interrupt-parent = <&gpio4>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + reset-post-delay-us = <4000>; + + phy3: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; }; }; diff --git a/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml b/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml new file mode 100644 index 0000000000..d9a8d586e2 --- /dev/null +++ b/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/renesas,rzn1-gmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas GMAC + +maintainers: + - Romain Gantois + +select: + properties: + compatible: + contains: + enum: + - renesas,r9a06g032-gmac + - renesas,rzn1-gmac + required: + - compatible + +allOf: + - $ref: snps,dwmac.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r9a06g032-gmac + - const: renesas,rzn1-gmac + - const: snps,dwmac + + pcs-handle: + description: + phandle pointing to a PCS sub-node compatible with + renesas,rzn1-miic.yaml# + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include + #include + + ethernet@44000000 { + compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac"; + reg = <0x44000000 0x2000>; + interrupts = , + , + ; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + clock-names = "stmmaceth"; + clocks = <&sysctrl R9A06G032_HCLK_GMAC0>; + power-domains = <&sysctrl>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + tx-fifo-depth = <2048>; + rx-fifo-depth = <4096>; + pcs-handle = <&mii_conv1>; + phy-mode = "mii"; + }; + +... diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index 70bbc4220e..6bbe96e352 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -137,8 +137,6 @@ examples: assigned-clock-parents = <&ext_gmac>; rockchip,grf = <&grf>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; clock_in_out = "input"; - tx_delay = <0x30>; - rx_delay = <0x10>; }; diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml index bf6cbc7c2b..90611b598d 100644 --- a/Documentation/devicetree/bindings/net/sff,sfp.yaml +++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml @@ -29,39 +29,39 @@ properties: allowable by a module in the slot, in milli-Watts. Presently, modules can be up to 1W, 1.5W or 2W. - "mod-def0-gpios": + mod-def0-gpios: maxItems: 1 description: GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) module presence input gpio signal, active (module absent) high. Must not be present for SFF modules - "los-gpios": + los-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Receiver Loss of Signal Indication input gpio signal, active (signal lost) high - "tx-fault-gpios": + tx-fault-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Module Transmitter Fault input gpio signal, active (fault condition) high - "tx-disable-gpios": + tx-disable-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Transmitter Disable output gpio signal, active (Tx disable) high - "rate-select0-gpios": + rate-select0-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0) output gpio signal, low - low Rx rate, high - high Rx rate Must not be present for SFF modules - "rate-select1-gpios": + rate-select1-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1) diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 6b0341a8e0..21cc27e75f 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -242,7 +242,8 @@ properties: type: boolean description: Multicast & Broadcast Packets snps,priority: - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 1 description: Bitmask of the tagged frames priorities assigned to the queue allOf: - if: @@ -327,9 +328,6 @@ properties: snps,tx-sched-dwrr: type: boolean description: Deficit Weighted Round Robin - snps,tx-sched-sp: - type: boolean - description: Strict priority allOf: - if: required: @@ -338,7 +336,6 @@ properties: properties: snps,tx-sched-wfq: false snps,tx-sched-dwrr: false - snps,tx-sched-sp: false - if: required: - snps,tx-sched-wfq @@ -346,7 +343,6 @@ properties: properties: snps,tx-sched-wrr: false snps,tx-sched-dwrr: false - snps,tx-sched-sp: false - if: required: - snps,tx-sched-dwrr @@ -354,15 +350,6 @@ properties: properties: snps,tx-sched-wrr: false snps,tx-sched-wfq: false - snps,tx-sched-sp: false - - if: - required: - - snps,tx-sched-sp - then: - properties: - snps,tx-sched-wrr: false - snps,tx-sched-wfq: false - snps,tx-sched-dwrr: false patternProperties: "^queue[0-9]$": description: Each subnode represents a queue. @@ -393,7 +380,8 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: max read outstanding req. limit snps,priority: - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 1 description: Bitmask of the tagged frames priorities assigned to the queue. When a PFC frame is received with priorities matching the bitmask, diff --git a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml index 0d1962980f..313a153316 100644 --- a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml @@ -30,6 +30,10 @@ properties: - items: - const: starfive,jh7110-dwmac - const: snps,dwmac-5.20 + - items: + - const: starfive,jh8100-dwmac + - const: starfive,jh7110-dwmac + - const: snps,dwmac-5.20 reg: maxItems: 1 @@ -116,11 +120,25 @@ allOf: minItems: 3 maxItems: 3 - resets: - minItems: 2 - - reset-names: - minItems: 2 + if: + properties: + compatible: + contains: + const: starfive,jh8100-dwmac + then: + properties: + resets: + maxItems: 1 + + reset-names: + const: stmmaceth + else: + properties: + resets: + minItems: 2 + + reset-names: + minItems: 2 unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index fc8c96b08d..7ccf75676b 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -82,6 +82,13 @@ properties: Should be phandle/offset pair. The phandle to the syscon node which encompases the glue register, and the offset of the control register + st,ext-phyclk: + description: + set this property in RMII mode when you have PHY without crystal 50MHz and want to + select RCC clock instead of ETH_REF_CLK. OR in RGMII mode when you want to select + RCC clock instead of ETH_CLK125. + type: boolean + st,eth-clk-sel: description: set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. @@ -93,6 +100,10 @@ properties: select RCC clock instead of ETH_REF_CLK. type: boolean + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - clocks diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index d5bd93ee4d..d14ca81f70 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -8,7 +8,6 @@ title: TI SoC Ethernet Switch Controller (CPSW) maintainers: - Siddharth Vadapalli - - Ravi Gunasekaran - Roger Quadros description: diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml index 229c8f3201..e253fa7860 100644 --- a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml +++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml @@ -13,14 +13,12 @@ description: Ethernet based on the Programmable Real-Time Unit and Industrial Communication Subsystem. -allOf: - - $ref: /schemas/remoteproc/ti,pru-consumer.yaml# - properties: compatible: enum: - - ti,am642-icssg-prueth # for AM64x SoC family - - ti,am654-icssg-prueth # for AM65x SoC family + - ti,am642-icssg-prueth # for AM64x SoC family + - ti,am654-icssg-prueth # for AM65x SoC family + - ti,am654-sr1-icssg-prueth # for AM65x SoC family, SR1.0 sram: $ref: /schemas/types.yaml#/definitions/phandle @@ -28,9 +26,11 @@ properties: phandle to MSMC SRAM node dmas: - maxItems: 10 + minItems: 10 + maxItems: 12 dma-names: + minItems: 10 items: - const: tx0-0 - const: tx0-1 @@ -42,6 +42,8 @@ properties: - const: tx1-3 - const: rx0 - const: rx1 + - const: rxmgm0 + - const: rxmgm1 ti,mii-g-rt: $ref: /schemas/types.yaml#/definitions/phandle @@ -132,6 +134,27 @@ required: - interrupts - interrupt-names +allOf: + - $ref: /schemas/remoteproc/ti,pru-consumer.yaml# + + - if: + properties: + compatible: + contains: + const: ti,am654-sr1-icssg-prueth + then: + properties: + dmas: + minItems: 12 + dma-names: + minItems: 12 + else: + properties: + dmas: + maxItems: 10 + dma-names: + maxItems: 10 + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 73ed5951d2..02b6d32003 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -8,7 +8,6 @@ title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Control maintainers: - Siddharth Vadapalli - - Ravi Gunasekaran - Roger Quadros description: diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml index b1c8753257..3888692275 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml @@ -8,7 +8,6 @@ title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module maintainers: - Siddharth Vadapalli - - Ravi Gunasekaran - Roger Quadros description: |+ diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml index 4aa521f1be..e564f20d8f 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml @@ -44,6 +44,7 @@ properties: - brcm,bcm4366-fmac - cypress,cyw4373-fmac - cypress,cyw43012-fmac + - infineon,cyw43439-fmac - const: brcm,bcm4329-fmac - enum: - brcm,bcm4329-fmac diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml index 9b3ef4bc37..5c4498b762 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml @@ -73,6 +73,12 @@ properties: - sky85703-11 - sky85803 + firmware-name: + maxItems: 1 + description: + If present, a board or platform specific string used to lookup firmware + files for the device. + wifi-firmware: type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index 672282cdfc..a2d55bf4c7 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -59,6 +59,8 @@ properties: minItems: 1 maxItems: 2 + ieee80211-freq-limit: true + wifi-firmware: type: object description: | @@ -88,6 +90,7 @@ required: additionalProperties: false allOf: + - $ref: ieee80211.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index 8c8f05d9ea..80845c722a 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -34,6 +34,7 @@ properties: - qcom,qcs404-qfprom - qcom,sc7180-qfprom - qcom,sc7280-qfprom + - qcom,sc8280xp-qfprom - qcom,sdm630-qfprom - qcom,sdm670-qfprom - qcom,sdm845-qfprom @@ -42,6 +43,9 @@ properties: - qcom,sm6375-qfprom - qcom,sm8150-qfprom - qcom,sm8250-qfprom + - qcom,sm8450-qfprom + - qcom,sm8550-qfprom + - qcom,sm8650-qfprom - const: qcom,qfprom reg: diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml index 068bedf5db..5d7be0b345 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SPMI SDAM maintainers: - - Shyam Kumar Thella + - David Collins description: | The SDAM provides scratch register space for the PMIC clients. This diff --git a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml index 51f62c3ae1..ec5e424bb3 100644 --- a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml +++ b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml @@ -13,25 +13,25 @@ maintainers: description: | For some SoCs, the CPU frequency subset and voltage value of each OPP varies based on the silicon variant in use. Allwinner Process - Voltage Scaling Tables defines the voltage and frequency value based - on the speedbin blown in the efuse combination. The - sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to - provide the OPP framework with required information. + Voltage Scaling Tables define the voltage and frequency values based + on the speedbin blown in the efuse combination. allOf: - $ref: opp-v2-base.yaml# properties: compatible: - const: allwinner,sun50i-h6-operating-points + enum: + - allwinner,sun50i-h6-operating-points + - allwinner,sun50i-h616-operating-points nvmem-cells: description: | A phandle pointing to a nvmem-cells node representing the efuse - registers that has information about the speedbin that is used + register that has information about the speedbin that is used to select the right frequency/voltage value pair. Please refer - the for nvmem-cells bindings - Documentation/devicetree/bindings/nvmem/nvmem.txt and also + to the nvmem-cells bindings in + Documentation/devicetree/bindings/nvmem/nvmem.yaml and also the examples below. opp-shared: true @@ -47,15 +47,18 @@ patternProperties: properties: opp-hz: true clock-latency-ns: true + opp-microvolt: true + opp-supported-hw: + maxItems: 1 + description: + A single 32 bit bitmap value, representing compatible HW, one + bit per speed bin index. patternProperties: "^opp-microvolt-speed[0-9]$": true required: - opp-hz - - opp-microvolt-speed0 - - opp-microvolt-speed1 - - opp-microvolt-speed2 unevaluatedProperties: false @@ -77,58 +80,54 @@ examples: opp-microvolt-speed2 = <800000>; }; - opp-720000000 { + opp-1080000000 { clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <720000000>; + opp-hz = /bits/ 64 <1080000000>; - opp-microvolt-speed0 = <880000>; - opp-microvolt-speed1 = <820000>; - opp-microvolt-speed2 = <800000>; + opp-microvolt-speed0 = <1060000>; + opp-microvolt-speed1 = <880000>; + opp-microvolt-speed2 = <840000>; }; - opp-816000000 { + opp-1488000000 { clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <816000000>; + opp-hz = /bits/ 64 <1488000000>; - opp-microvolt-speed0 = <880000>; - opp-microvolt-speed1 = <820000>; - opp-microvolt-speed2 = <800000>; + opp-microvolt-speed0 = <1160000>; + opp-microvolt-speed1 = <1000000>; + opp-microvolt-speed2 = <960000>; }; + }; - opp-888000000 { - clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <888000000>; - - opp-microvolt-speed0 = <940000>; - opp-microvolt-speed1 = <820000>; - opp-microvolt-speed2 = <800000>; - }; + - | + opp-table { + compatible = "allwinner,sun50i-h616-operating-points"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; - opp-1080000000 { + opp-480000000 { clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <1080000000>; + opp-hz = /bits/ 64 <480000000>; - opp-microvolt-speed0 = <1060000>; - opp-microvolt-speed1 = <880000>; - opp-microvolt-speed2 = <840000>; + opp-microvolt = <900000>; + opp-supported-hw = <0x1f>; }; - opp-1320000000 { + opp-792000000 { clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <1320000000>; + opp-hz = /bits/ 64 <792000000>; - opp-microvolt-speed0 = <1160000>; - opp-microvolt-speed1 = <940000>; - opp-microvolt-speed2 = <900000>; + opp-microvolt-speed1 = <900000>; + opp-microvolt-speed4 = <940000>; + opp-supported-hw = <0x12>; }; - opp-1488000000 { + opp-1512000000 { clock-latency-ns = <244144>; /* 8 32k periods */ - opp-hz = /bits/ 64 <1488000000>; + opp-hz = /bits/ 64 <1512000000>; - opp-microvolt-speed0 = <1160000>; - opp-microvolt-speed1 = <1000000>; - opp-microvolt-speed2 = <960000>; + opp-microvolt = <1100000>; + opp-supported-hw = <0x0a>; }; }; diff --git a/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml index a5bd90bc07..79a21ba0f9 100644 --- a/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml @@ -13,7 +13,7 @@ description: Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core. allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# - $ref: /schemas/pci/snps,dw-pcie-common.yaml# # We need a select here so we don't match all nodes with 'snps,dw-pcie' diff --git a/Documentation/devicetree/bindings/pci/apple,pcie.yaml b/Documentation/devicetree/bindings/pci/apple,pcie.yaml index 215ff9a9c8..c8775f9cb0 100644 --- a/Documentation/devicetree/bindings/pci/apple,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/apple,pcie.yaml @@ -85,7 +85,7 @@ required: unevaluatedProperties: false allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# - $ref: /schemas/interrupt-controller/msi-controller.yaml# - if: properties: diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml index 0e07ab61a4..5434c144d2 100644 --- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml @@ -11,7 +11,7 @@ maintainers: - Scott Branden allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index 22491f7f88..11f8ea3324 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -108,7 +108,7 @@ required: - msi-controller allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# - $ref: /schemas/interrupt-controller/msi-controller.yaml# - if: properties: diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml index bc3c48f60f..a8190d9b10 100644 --- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml @@ -10,7 +10,6 @@ maintainers: - Tom Joseph allOf: - - $ref: /schemas/pci/pci-bus.yaml# - $ref: cdns-pcie-host.yaml# properties: @@ -25,8 +24,6 @@ properties: - const: reg - const: cfg - msi-parent: true - required: - reg - reg-names diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml index a6b494401e..f4eb82e684 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml @@ -10,7 +10,7 @@ maintainers: - Tom Joseph allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# - $ref: cdns-pcie.yaml# properties: diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml index 92efbf0f12..378dd1c8e2 100644 --- a/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml +++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml @@ -51,7 +51,7 @@ description: | <0x6000 0 0 4 &pci_intc 2>; allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml new file mode 100644 index 0000000000..399efa7364 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape PCIe Endpoint(EP) controller + +maintainers: + - Frank Li + +description: + This PCIe EP controller is based on the Synopsys DesignWare PCIe IP. + + This controller derives its clocks from the Reset Configuration Word (RCW) + which is used to describe the PLL settings at the time of chip-reset. + + Also as per the available Reference Manuals, there is no specific 'version' + register available in the Freescale PCIe controller register set, + which can allow determining the underlying DesignWare PCIe controller version + information. + +properties: + compatible: + enum: + - fsl,ls2088a-pcie-ep + - fsl,ls1088a-pcie-ep + - fsl,ls1046a-pcie-ep + - fsl,ls1028a-pcie-ep + - fsl,lx2160ar2-pcie-ep + + reg: + maxItems: 2 + + reg-names: + items: + - const: regs + - const: addr_space + + fsl,pcie-scfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the SCFG device node. The second entry is the + physical PCIe controller index starting from '0'. This is used to get + SCFG PEXN registers. + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: If the PEX_LUT and PF register block is in big-endian, specify + this property. + + dma-coherent: true + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + +required: + - compatible + - reg + - reg-names + +allOf: + - if: + properties: + compatible: + enum: + - fsl,ls1028a-pcie-ep + - fsl,ls1046a-pcie-ep + - fsl,ls1088a-pcie-ep + then: + properties: + interrupt-names: + items: + - const: pme + +unevaluatedProperties: false + +examples: + - | + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie_ep1: pcie-ep@3400000 { + compatible = "fsl,ls1028a-pcie-ep"; + reg = <0x00 0x03400000 0x0 0x00100000 + 0x80 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + interrupts = ; /* PME interrupt */ + interrupt-names = "pme"; + num-ib-windows = <6>; + num-ob-windows = <8>; + status = "disabled"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml new file mode 100644 index 0000000000..793986c5af --- /dev/null +++ b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape PCIe Root Complex(RC) controller + +maintainers: + - Frank Li + +description: + This PCIe RC controller is based on the Synopsys DesignWare PCIe IP + + This controller derives its clocks from the Reset Configuration Word (RCW) + which is used to describe the PLL settings at the time of chip-reset. + + Also as per the available Reference Manuals, there is no specific 'version' + register available in the Freescale PCIe controller register set, + which can allow determining the underlying DesignWare PCIe controller version + information. + +properties: + compatible: + enum: + - fsl,ls1021a-pcie + - fsl,ls2080a-pcie + - fsl,ls2085a-pcie + - fsl,ls2088a-pcie + - fsl,ls1088a-pcie + - fsl,ls1046a-pcie + - fsl,ls1043a-pcie + - fsl,ls1012a-pcie + - fsl,ls1028a-pcie + - fsl,lx2160a-pcie + + reg: + maxItems: 2 + + reg-names: + items: + - const: regs + - const: config + + fsl,pcie-scfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the SCFG device node. The second entry is the + physical PCIe controller index starting from '0'. This is used to get + SCFG PEXN registers. + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: If the PEX_LUT and PF register block is in big-endian, specify + this property. + + dma-coherent: true + + msi-parent: true + + iommu-map: true + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + +required: + - compatible + - reg + - reg-names + - "#address-cells" + - "#size-cells" + - device_type + - bus-range + - ranges + - interrupts + - interrupt-names + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + + - if: + properties: + compatible: + enum: + - fsl,ls1028a-pcie + - fsl,ls1046a-pcie + - fsl,ls1043a-pcie + - fsl,ls1012a-pcie + then: + properties: + interrupts: + maxItems: 2 + interrupt-names: + items: + - const: pme + - const: aer + + - if: + properties: + compatible: + enum: + - fsl,ls2080a-pcie + - fsl,ls2085a-pcie + - fsl,ls2088a-pcie + then: + properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: intr + + - if: + properties: + compatible: + enum: + - fsl,ls1088a-pcie + then: + properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: aer + +unevaluatedProperties: false + +examples: + - | + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@3400000 { + compatible = "fsl,ls1088a-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + dma-coherent; + device_type = "pci"; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml index d25423aa71..3484e0b4b4 100644 --- a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml +++ b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml @@ -116,7 +116,7 @@ required: - ranges allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml index debfb54a80..3cae2e0f7f 100644 --- a/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml +++ b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml @@ -12,7 +12,7 @@ maintainers: description: PCI host controller found in the Intel IXP4xx SoC series. allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml index 505acc4f3e..1fd557504b 100644 --- a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml @@ -11,7 +11,7 @@ maintainers: - Srikanth Thokala allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt deleted file mode 100644 index ee8a4791a7..0000000000 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ /dev/null @@ -1,79 +0,0 @@ -Freescale Layerscape PCIe controller - -This PCIe host controller is based on the Synopsys DesignWare PCIe IP -and thus inherits all the common properties defined in snps,dw-pcie.yaml. - -This controller derives its clocks from the Reset Configuration Word (RCW) -which is used to describe the PLL settings at the time of chip-reset. - -Also as per the available Reference Manuals, there is no specific 'version' -register available in the Freescale PCIe controller register set, -which can allow determining the underlying DesignWare PCIe controller version -information. - -Required properties: -- compatible: should contain the platform identifier such as: - RC mode: - "fsl,ls1021a-pcie" - "fsl,ls2080a-pcie", "fsl,ls2085a-pcie" - "fsl,ls2088a-pcie" - "fsl,ls1088a-pcie" - "fsl,ls1046a-pcie" - "fsl,ls1043a-pcie" - "fsl,ls1012a-pcie" - "fsl,ls1028a-pcie" - EP mode: - "fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep" - "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" - "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep" - "fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep" - "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep" -- reg: base addresses and lengths of the PCIe controller register blocks. -- interrupts: A list of interrupt outputs of the controller. Must contain an - entry for each entry in the interrupt-names property. -- interrupt-names: It could include the following entries: - "aer": Used for interrupt line which reports AER events when - non MSI/MSI-X/INTx mode is used - "pme": Used for interrupt line which reports PME events when - non MSI/MSI-X/INTx mode is used - "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a) - which has a single interrupt line for miscellaneous controller - events(could include AER and PME events). -- fsl,pcie-scfg: Must include two entries. - The first entry must be a link to the SCFG device node - The second entry is the physical PCIe controller index starting from '0'. - This is used to get SCFG PEXN registers -- dma-coherent: Indicates that the hardware IP block can ensure the coherency - of the data transferred from/to the IP block. This can avoid the software - cache flush/invalid actions, and improve the performance significantly. - -Optional properties: -- big-endian: If the PEX_LUT and PF register block is in big-endian, specify - this property. - -Example: - - pcie@3400000 { - compatible = "fsl,ls1088a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ - <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ - interrupt-names = "aer"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - num-viewport = <256>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>; - iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ - }; diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml index a8324a9bd0..1988465e73 100644 --- a/Documentation/devicetree/bindings/pci/loongson.yaml +++ b/Documentation/devicetree/bindings/pci/loongson.yaml @@ -13,7 +13,7 @@ description: |+ PCI host controller found on Loongson PCHs and SoCs. allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml index e63e6458ce..6fba42156d 100644 --- a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml @@ -14,7 +14,7 @@ description: |+ with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# properties: compatible: @@ -33,9 +33,12 @@ properties: patternProperties: '^pcie@[0-2],0$': type: object - $ref: /schemas/pci/pci-bus.yaml# + $ref: /schemas/pci/pci-pci-bridge.yaml# properties: + reg: + maxItems: 1 + resets: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml index 7e8c7a2a5f..76d742051f 100644 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml @@ -140,7 +140,7 @@ required: - interrupt-controller allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml index f7a3c26363..5d7aec5f54 100644 --- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml @@ -10,7 +10,7 @@ maintainers: - Daire McNamara allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# - $ref: /schemas/interrupt-controller/msi-controller.yaml# properties: @@ -65,7 +65,8 @@ properties: - const: msi ranges: - maxItems: 1 + minItems: 1 + maxItems: 3 dma-ranges: minItems: 1 diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml index 0d1b23523f..0a39bbfcb2 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml @@ -95,6 +95,6 @@ anyOf: - msi-map allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml index 9eb6e457b0..2a4cc41fc7 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml @@ -71,28 +71,6 @@ properties: items: - const: pci -oneOf: - - properties: - interrupts: - maxItems: 1 - interrupt-names: - items: - - const: msi - - - properties: - interrupts: - minItems: 8 - interrupt-names: - items: - - const: msi0 - - const: msi1 - - const: msi2 - - const: msi3 - - const: msi4 - - const: msi5 - - const: msi6 - - const: msi7 - allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml index cf9a6910b5..f867746b1a 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -130,7 +130,7 @@ anyOf: - msi-map allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml index fe38f62da0..91b81ac755 100644 --- a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml @@ -16,7 +16,9 @@ allOf: properties: compatible: items: - - const: renesas,r8a779f0-pcie-ep # R-Car S4-8 + - enum: + - renesas,r8a779f0-pcie-ep # R-Car S4-8 + - renesas,r8a779g0-pcie-ep # R-Car V4H - const: renesas,rcar-gen4-pcie-ep # R-Car Gen4 reg: diff --git a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml index ffb34339b6..955c664f1f 100644 --- a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml @@ -16,7 +16,9 @@ allOf: properties: compatible: items: - - const: renesas,r8a779f0-pcie # R-Car S4-8 + - enum: + - renesas,r8a779f0-pcie # R-Car S4-8 + - renesas,r8a779g0-pcie # R-Car V4H - const: renesas,rcar-gen4-pcie # R-Car Gen4 reg: diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml index 835b6db00c..666f013e3a 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml @@ -12,7 +12,7 @@ maintainers: - Yoshihiro Shimoda allOf: - - $ref: pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml index 5a0d64d3ae..b288cdb1ec 100644 --- a/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml +++ b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml @@ -110,7 +110,7 @@ required: - "#interrupt-cells" allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# - if: properties: diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml index 002b728cbc..720a5f945a 100644 --- a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml @@ -10,7 +10,7 @@ maintainers: - Shawn Lin allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# - $ref: rockchip,rk3399-pcie-common.yaml# properties: diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index 022055edbf..548f59d76e 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -23,7 +23,7 @@ select: - compatible allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# - $ref: /schemas/pci/snps,dw-pcie-common.yaml# - if: not: diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml index a20dccbafd..0a9d10532c 100644 --- a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml @@ -11,7 +11,7 @@ maintainers: - Kishon Vijay Abraham I allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# properties: compatible: @@ -55,6 +55,20 @@ properties: dma-coherent: true + num-viewport: + $ref: /schemas/types.yaml#/definitions/uint32 + + phys: + description: per-lane PHYs + minItems: 1 + maxItems: 2 + + phy-names: + minItems: 1 + maxItems: 2 + items: + pattern: '^pcie-phy[0-1]$' + required: - compatible - reg @@ -74,6 +88,7 @@ then: - dma-coherent - power-domains - msi-map + - num-viewport unevaluatedProperties: false @@ -81,6 +96,7 @@ examples: - | #include #include + #include #include pcie0_rc: pcie@5500000 { @@ -98,9 +114,13 @@ examples: ti,syscon-pcie-id = <&scm_conf 0x0210>; ti,syscon-pcie-mode = <&scm_conf 0x4060>; bus-range = <0x0 0xff>; + num-viewport = <16>; max-link-speed = <2>; dma-coherent; interrupts = ; msi-map = <0x0 &gic_its 0x0 0x10000>; device_type = "pci"; + num-lanes = <1>; + phys = <&serdes0 PHY_TYPE_PCIE 0>; + phy-names = "pcie-phy0"; }; diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml index b7a534cef2..15a2658cee 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml @@ -23,6 +23,10 @@ properties: items: - const: ti,j7200-pcie-host - const: ti,j721e-pcie-host + - description: PCIe controller in J722S + items: + - const: ti,j722s-pcie-host + - const: ti,j721e-pcie-host reg: maxItems: 4 @@ -68,6 +72,7 @@ properties: - 0xb00d - 0xb00f - 0xb010 + - 0xb012 - 0xb013 msi-map: true diff --git a/Documentation/devicetree/bindings/pci/versatile.yaml b/Documentation/devicetree/bindings/pci/versatile.yaml index 09748ef6b9..294c7cd84b 100644 --- a/Documentation/devicetree/bindings/pci/versatile.yaml +++ b/Documentation/devicetree/bindings/pci/versatile.yaml @@ -13,7 +13,7 @@ description: |+ PCI host controller found on the ARM Versatile PB board's FPGA. allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml index 4734be456b..4770ce02fc 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml +++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml @@ -10,7 +10,7 @@ maintainers: - Bharat Kumar Gogada allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# properties: compatible: @@ -48,13 +48,16 @@ properties: interrupt-controller: description: Interrupt controller node for handling legacy PCI interrupts. type: object + additionalProperties: false + properties: "#address-cells": const: 0 + "#interrupt-cells": const: 1 - "interrupt-controller": true - additionalProperties: false + + interrupt-controller: true required: - reg diff --git a/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml b/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml index 69b7decabd..fb87b960a2 100644 --- a/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml @@ -10,7 +10,7 @@ maintainers: - Thippeswamy Havalige allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml index 426f90a47f..9cad860c51 100644 --- a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml @@ -10,7 +10,7 @@ maintainers: - Thippeswamy Havalige allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# - $ref: /schemas/interrupt-controller/msi-controller.yaml# properties: @@ -84,7 +84,7 @@ properties: "#interrupt-cells": const: 1 - "interrupt-controller": true + interrupt-controller: true required: - "#address-cells" diff --git a/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml b/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml index 0aa00b8e49..2f59b3a73d 100644 --- a/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml +++ b/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml @@ -10,7 +10,7 @@ maintainers: - Thippeswamy Havalige allOf: - - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/pci-host-bridge.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml index 8467c8e636..439bda1427 100644 --- a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml +++ b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml @@ -59,14 +59,14 @@ patternProperties: "#phy-cells": const: 0 - "brcm,enable-ssc": + brcm,enable-ssc: $ref: /schemas/types.yaml#/definitions/flag description: | Use spread spectrum clocking (SSC) on this port This property is not applicable for "brcm,iproc-ns2-sata-phy", "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy". - "brcm,rxaeq-mode": + brcm,rxaeq-mode: $ref: /schemas/types.yaml#/definitions/string description: String that indicates the desired RX equalizer mode. @@ -75,7 +75,7 @@ patternProperties: - auto - manual - "brcm,rxaeq-value": + brcm,rxaeq-value: $ref: /schemas/types.yaml#/definitions/uint32 description: | When 'brcm,rxaeq-mode' is set to "manual", provides the RX @@ -83,7 +83,7 @@ patternProperties: minimum: 0 maximum: 63 - "brcm,tx-amplitude-millivolt": + brcm,tx-amplitude-millivolt: description: | Transmit amplitude voltage in millivolt. $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mp-hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mp-hdmi-phy.yaml new file mode 100644 index 0000000000..c43e86a8c2 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mp-hdmi-phy.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/fsl,imx8mp-hdmi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP HDMI PHY + +maintainers: + - Lucas Stach + +properties: + compatible: + enum: + - fsl,imx8mp-hdmi-phy + + reg: + maxItems: 1 + + "#clock-cells": + const: 0 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: apb + - const: ref + + "#phy-cells": + const: 0 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - "#clock-cells" + - clocks + - clock-names + - "#phy-cells" + - power-domains + +additionalProperties: false + +examples: + - | + #include + #include + + phy@32fdff00 { + compatible = "fsl,imx8mp-hdmi-phy"; + reg = <0x32fdff00 0x100>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>, + <&clk IMX8MP_CLK_HDMI_24M>; + clock-names = "apb", "ref"; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>; + #clock-cells = <0>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml new file mode 100644 index 0000000000..cfb3ca97f8 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,mt7988-xfi-tphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7988 XFI T-PHY + +maintainers: + - Daniel Golle + +description: + The MediaTek XFI SerDes T-PHY provides the physical SerDes lanes + used by the (10G/5G) USXGMII PCS and (1G/2.5G) LynxI PCS found in + MediaTek's 10G-capabale MT7988 SoC. + In MediaTek's SDK sources, this unit is referred to as "pextp". + +properties: + compatible: + const: mediatek,mt7988-xfi-tphy + + reg: + maxItems: 1 + + clocks: + items: + - description: XFI PHY clock + - description: XFI register clock + + clock-names: + items: + - const: xfipll + - const: topxtal + + resets: + items: + - description: Reset controller corresponding to the phy instance. + + mediatek,usxgmii-performance-errata: + $ref: /schemas/types.yaml#/definitions/flag + description: + One instance of the T-PHY on MT7988 suffers from a performance + problem in 10GBase-R mode which needs a work-around in the driver. + This flag enables a work-around ajusting an analog phy setting and + is required for XFI Port0 of the MT7988 SoC to be in compliance with + the SFP specification. + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include + soc { + #address-cells = <2>; + #size-cells = <2>; + + phy@11f20000 { + compatible = "mediatek,mt7988-xfi-tphy"; + reg = <0 0x11f20000 0 0x10000>; + clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>, + <&topckgen CLK_TOP_XFI_PHY_0_XTAL_SEL>; + clock-names = "xfipll", "topxtal"; + resets = <&watchdog 14>; + mediatek,usxgmii-performance-errata; + #phy-cells = <0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml new file mode 100644 index 0000000000..1f1f8863b8 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/phy-rockchip-usbdp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip USBDP Combo PHY with Samsung IP block + +maintainers: + - Frank Wang + - Zhang Yubing + +properties: + compatible: + enum: + - rockchip,rk3588-usbdp-phy + + reg: + maxItems: 1 + + "#phy-cells": + description: | + Cell allows setting the type of the PHY. Possible values are: + - PHY_TYPE_USB3 + - PHY_TYPE_DP + const: 1 + + clocks: + maxItems: 4 + + clock-names: + items: + - const: refclk + - const: immortal + - const: pclk + - const: utmi + + resets: + maxItems: 5 + + reset-names: + items: + - const: init + - const: cmn + - const: lane + - const: pcs_apb + - const: pma_apb + + rockchip,dp-lane-mux: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 4 + items: + maximum: 3 + description: + An array of physical Type-C lanes indexes. Position of an entry + determines the DisplayPort (DP) lane index, while the value of an entry + indicates physical Type-C lane. The supported DP lanes number are 2 or 4. + e.g. for 2 lanes DP lanes map, we could have "rockchip,dp-lane-mux = <2, + 3>;", assuming DP lane0 on Type-C phy lane2, DP lane1 on Type-C phy + lane3. For 4 lanes DP lanes map, we could have "rockchip,dp-lane-mux = + <0, 1, 2, 3>;", assuming DP lane0 on Type-C phy lane0, DP lane1 on Type-C + phy lane1, DP lane2 on Type-C phy lane2, DP lane3 on Type-C phy lane3. If + DP lanes are mapped by DisplayPort Alt mode, this property is not needed. + + rockchip,u2phy-grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the 'usb2 phy general register files'. + + rockchip,usb-grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the 'usb general register files'. + + rockchip,usbdpphy-grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the 'usbdp phy general register files'. + + rockchip,vo-grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the 'video output general register files'. + When select the DP lane mapping will request its phandle. + + sbu1-dc-gpios: + description: + GPIO connected to the SBU1 line of the USB-C connector via a big resistor + (~100K) to apply a DC offset for signalling the connector orientation. + maxItems: 1 + + sbu2-dc-gpios: + description: + GPIO connected to the SBU2 line of the USB-C connector via a big resistor + (~100K) to apply a DC offset for signalling the connector orientation. + maxItems: 1 + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + mode-switch: + description: Flag the port as possible handler of altmode switching + type: boolean + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the PHY to a TypeC controller for the purpose of + handling orientation switching. + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include + #include + + usbdp_phy0: phy@fed80000 { + compatible = "rockchip,rk3588-usbdp-phy"; + reg = <0xfed80000 0x10000>; + #phy-cells = <1>; + clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, + <&cru CLK_USBDP_PHY0_IMMORTAL>, + <&cru PCLK_USBDPPHY0>, + <&u2phy0>; + clock-names = "refclk", "immortal", "pclk", "utmi"; + resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>, + <&cru SRST_USBDP_COMBO_PHY0_CMN>, + <&cru SRST_USBDP_COMBO_PHY0_LANE>, + <&cru SRST_USBDP_COMBO_PHY0_PCS>, + <&cru SRST_P_USBDPPHY0>; + reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; + rockchip,u2phy-grf = <&usb2phy0_grf>; + rockchip,usb-grf = <&usb_grf>; + rockchip,usbdpphy-grf = <&usbdpphy0_grf>; + rockchip,vo-grf = <&vo0_grf>; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml index 24a3dbde22..ceea122ae1 100644 --- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml @@ -55,6 +55,10 @@ properties: description: number of clock cells for ck_usbo_48m consumer const: 0 + access-controllers: + minItems: 1 + maxItems: 2 + # Required child nodes: patternProperties: diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml index 6566353f1a..4e15d90d08 100644 --- a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml @@ -21,6 +21,7 @@ properties: - qcom,sc8180x-edp-phy - qcom,sc8280xp-dp-phy - qcom,sc8280xp-edp-phy + - qcom,x1e80100-dp-phy reg: items: diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml index 7543456862..16634f73bd 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml @@ -88,11 +88,11 @@ properties: - description: offset of PCIe 4-lane configuration register - description: offset of configuration bit for this PHY - "#clock-cells": - const: 0 + "#clock-cells": true clock-output-names: - maxItems: 1 + minItems: 1 + maxItems: 2 "#phy-cells": const: 0 @@ -212,6 +212,27 @@ allOf: reset-names: maxItems: 1 + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8450-qmp-gen4x2-pcie-phy + - qcom,sm8550-qmp-gen4x2-pcie-phy + - qcom,sm8650-qmp-gen4x2-pcie-phy + then: + properties: + clock-output-names: + minItems: 2 + "#clock-cells": + const: 1 + else: + properties: + clock-output-names: + maxItems: 1 + "#clock-cells": + const: 0 + examples: - | #include diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml index c4c4fb38c5..f9cfbd0b2d 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml @@ -32,6 +32,7 @@ properties: - qcom,sm8250-qmp-ufs-phy - qcom,sm8350-qmp-ufs-phy - qcom,sm8450-qmp-ufs-phy + - qcom,sm8475-qmp-ufs-phy - qcom,sm8550-qmp-ufs-phy - qcom,sm8650-qmp-ufs-phy @@ -85,6 +86,7 @@ allOf: enum: - qcom,msm8998-qmp-ufs-phy - qcom,sa8775p-qmp-ufs-phy + - qcom,sc7180-qmp-ufs-phy - qcom,sc7280-qmp-ufs-phy - qcom,sc8180x-qmp-ufs-phy - qcom,sc8280xp-qmp-ufs-phy @@ -97,6 +99,7 @@ allOf: - qcom,sm8250-qmp-ufs-phy - qcom,sm8350-qmp-ufs-phy - qcom,sm8450-qmp-ufs-phy + - qcom,sm8475-qmp-ufs-phy - qcom,sm8550-qmp-ufs-phy - qcom,sm8650-qmp-ufs-phy then: diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml index 1e2d4ddc53..212e56eb1b 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml @@ -20,6 +20,7 @@ properties: - qcom,ipq8074-qmp-usb3-phy - qcom,ipq9574-qmp-usb3-phy - qcom,msm8996-qmp-usb3-phy + - qcom,qdu1000-qmp-usb3-uni-phy - qcom,sa8775p-qmp-usb3-uni-phy - qcom,sc8280xp-qmp-usb3-uni-phy - qcom,sdm845-qmp-usb3-uni-phy @@ -109,6 +110,7 @@ allOf: compatible: contains: enum: + - qcom,qdu1000-qmp-usb3-uni-phy - qcom,sa8775p-qmp-usb3-uni-phy - qcom,sc8280xp-qmp-usb3-uni-phy - qcom,sm8150-qmp-usb3-uni-phy diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml index 24c733c10e..90d79491e2 100644 --- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml @@ -20,7 +20,9 @@ properties: - enum: - qcom,pm7550ba-eusb2-repeater - const: qcom,pm8550b-eusb2-repeater - - const: qcom,pm8550b-eusb2-repeater + - enum: + - qcom,pm8550b-eusb2-repeater + - qcom,smb2360-eusb2-repeater reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml index fce7f8a19e..519c2b403f 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -22,6 +22,7 @@ properties: - const: qcom,usb-snps-hs-5nm-phy - items: - enum: + - qcom,qdu1000-usb-hs-phy - qcom,sc7280-usb-hs-phy - qcom,sc8180x-usb-hs-phy - qcom,sdx55-usb-hs-phy diff --git a/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml index c4fbffcde6..ba67dca5a4 100644 --- a/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml +++ b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml @@ -54,6 +54,16 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the syscon managing the pipe "general register files" + rockchip,rx-common-refclk-mode: + description: which lanes (by position) should be configured to run in + RX common reference clock mode. 0 means disabled, 1 means enabled. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 16 + items: + minimum: 0 + maximum: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml index 782f975b43..f402e31bf5 100644 --- a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml @@ -15,6 +15,7 @@ properties: compatible: enum: + - google,gs101-ufs-phy - samsung,exynos7-ufs-phy - samsung,exynosautov9-ufs-phy - tesla,fsd-ufs-phy diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml index 60f30a59f3..d74cae9d4d 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml @@ -34,6 +34,9 @@ properties: the amount of cells must be specified as 2. See the below mentioned gpio binding representation for description of particular cells. + gpio-ranges: + maxItems: 1 + interrupt-controller: true interrupts: @@ -75,8 +78,8 @@ patternProperties: function: description: A string containing the name of the function to mux to the group. - enum: [emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, sd, - spi, tdm, uart, watchdog, wifi] + enum: [antsel, emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, + sd, spi, tdm, uart, watchdog, wifi] groups: description: @@ -90,6 +93,20 @@ patternProperties: - function allOf: + - if: + properties: + function: + const: antsel + then: + properties: + groups: + items: + enum: [antsel0, antsel1, antsel2, antsel3, antsel4, antsel5, + antsel6, antsel7, antsel8, antsel9, antsel10, + antsel11, antsel12, antsel13, antsel14, antsel15, + antsel16, antsel17, antsel18, antsel19, antsel20, + antsel21, antsel22, antsel23, antsel24, antsel25, + antsel26, antsel27, antsel28, antsel29] - if: properties: function: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index 3f8ad07c7c..0bf2d9f093 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -24,11 +24,11 @@ properties: - qcom,pm6150-gpio - qcom,pm6150l-gpio - qcom,pm6350-gpio + - qcom,pm6450-gpio - qcom,pm7250b-gpio - qcom,pm7325-gpio - qcom,pm7550ba-gpio - qcom,pm8005-gpio - - qcom,pm8008-gpio - qcom,pm8018-gpio - qcom,pm8019-gpio - qcom,pm8038-gpio @@ -56,10 +56,12 @@ properties: - qcom,pma8084-gpio - qcom,pmc8180-gpio - qcom,pmc8180c-gpio + - qcom,pmd8028-gpio - qcom,pmi632-gpio - qcom,pmi8950-gpio - qcom,pmi8994-gpio - qcom,pmi8998-gpio + - qcom,pmih0108-gpio - qcom,pmk8350-gpio - qcom,pmk8550-gpio - qcom,pmm8155au-gpio @@ -72,6 +74,7 @@ properties: - qcom,pmx55-gpio - qcom,pmx65-gpio - qcom,pmx75-gpio + - qcom,pmxr2230-gpio - enum: - qcom,spmi-gpio @@ -122,7 +125,6 @@ allOf: compatible: contains: enum: - - qcom,pm8008-gpio - qcom,pmi8950-gpio - qcom,pmr735d-gpio then: @@ -141,6 +143,7 @@ allOf: - qcom,pm8005-gpio - qcom,pm8450-gpio - qcom,pm8916-gpio + - qcom,pmd8028-gpio - qcom,pmk8350-gpio - qcom,pmr735a-gpio - qcom,pmr735b-gpio @@ -198,6 +201,7 @@ allOf: contains: enum: - qcom,pm6350-gpio + - qcom,pm6450-gpio - qcom,pm8350c-gpio then: properties: @@ -261,6 +265,7 @@ allOf: - qcom,pmc8180c-gpio - qcom,pmp8074-gpio - qcom,pms405-gpio + - qcom,pmxr2230-gpio then: properties: gpio-line-names: @@ -300,6 +305,21 @@ allOf: minItems: 1 maxItems: 7 + - if: + properties: + compatible: + contains: + enum: + - qcom,pmih0108-gpio + then: + properties: + gpio-line-names: + minItems: 18 + maxItems: 18 + gpio-reserved-ranges: + minItems: 1 + maxItems: 9 + - if: properties: compatible: @@ -402,6 +422,10 @@ patternProperties: $ref: "#/$defs/qcom-pmic-gpio-state" additionalProperties: false + "-hog(-[0-9]+)?$": + required: + - gpio-hog + $defs: qcom-pmic-gpio-state: type: object @@ -417,11 +441,11 @@ $defs: - gpio1-gpio10 for pm6150 - gpio1-gpio12 for pm6150l - gpio1-gpio9 for pm6350 + - gpio1-gpio9 for pm6450 - gpio1-gpio12 for pm7250b - gpio1-gpio10 for pm7325 - gpio1-gpio8 for pm7550ba - gpio1-gpio4 for pm8005 - - gpio1-gpio2 for pm8008 - gpio1-gpio6 for pm8018 - gpio1-gpio12 for pm8038 - gpio1-gpio40 for pm8058 @@ -447,9 +471,11 @@ $defs: - gpio1-gpio22 for pm8994 - gpio1-gpio26 for pm8998 - gpio1-gpio22 for pma8084 + - gpio1-gpio4 for pmd8028 - gpio1-gpio8 for pmi632 - gpio1-gpio2 for pmi8950 - gpio1-gpio10 for pmi8994 + - gpio1-gpio18 for pmih0108 - gpio1-gpio4 for pmk8350 - gpio1-gpio6 for pmk8550 - gpio1-gpio10 for pmm8155au @@ -464,6 +490,7 @@ $defs: and gpio11) - gpio1-gpio16 for pmx65 - gpio1-gpio16 for pmx75 + - gpio1-gpio12 for pmxr2230 items: pattern: "^gpio([0-9]+)$" @@ -545,6 +572,7 @@ $defs: examples: - | + #include #include pm8921_gpio: gpio@150 { @@ -568,5 +596,12 @@ examples: power-source = ; }; }; + + otg-hog { + gpio-hog; + gpios = <35 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "otg-gpio"; + }; }; ... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml index fe717d8d47..43146709e2 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml @@ -35,6 +35,7 @@ properties: - qcom,pm8038-mpp - qcom,pm8058-mpp - qcom,pm8821-mpp + - qcom,pm8901-mpp - qcom,pm8917-mpp - qcom,pm8921-mpp - const: qcom,ssbi-mpp diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml index 118549c259..242dd13c27 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml @@ -73,6 +73,13 @@ properties: minItems: 1 maxItems: 2 + clocks: + maxItems: 1 + + clock-names: + items: + - const: pclk + wakeup-interrupt-controller: $ref: samsung,pinctrl-wakeup-interrupt.yaml @@ -120,6 +127,20 @@ required: allOf: - $ref: pinctrl.yaml# + - if: + properties: + compatible: + contains: + const: google,gs101-pinctrl + then: + required: + - clocks + - clock-names + else: + properties: + clocks: false + clock-names: false + - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/platform/acer,aspire1-ec.yaml b/Documentation/devicetree/bindings/platform/acer,aspire1-ec.yaml new file mode 100644 index 0000000000..7cb0134134 --- /dev/null +++ b/Documentation/devicetree/bindings/platform/acer,aspire1-ec.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/platform/acer,aspire1-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Acer Aspire 1 Embedded Controller + +maintainers: + - Nikita Travkin + +description: + The Acer Aspire 1 laptop uses an embedded controller to control battery + and charging as well as to provide a set of misc features such as the + laptop lid status and HPD events for the USB Type-C DP alt mode. + +properties: + compatible: + const: acer,aspire1-ec + + reg: + const: 0x76 + + interrupts: + maxItems: 1 + + connector: + $ref: /schemas/connector/usb-connector.yaml# + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@76 { + compatible = "acer,aspire1-ec"; + reg = <0x76>; + + interrupts-extended = <&tlmm 30 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + + port { + ec_dp_in: endpoint { + remote-endpoint = <&mdss_dp_out>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml index a8d625f285..86af383789 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml @@ -34,7 +34,7 @@ properties: flt-gpios: maxItems: 1 - description: Fault pin (active low, output) + description: Fault pin (active low, input) dcm-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml index d84268b597..96cd6f3c35 100644 --- a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml @@ -25,6 +25,9 @@ properties: - items: - const: microchip,sama7g5-pwm - const: atmel,sama5d2-pwm + - items: + - const: microchip,sam9x7-pwm + - const: microchip,sam9x60-pwm reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml index 3afe1480df..f7bc84b05a 100644 --- a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml @@ -35,7 +35,6 @@ properties: required: - compatible - - '#pwm-cells' additionalProperties: false diff --git a/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml b/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml index ba6325575e..9ee1946dc2 100644 --- a/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml @@ -34,7 +34,6 @@ properties: required: - compatible - reg - - "#pwm-cells" - clocks additionalProperties: false diff --git a/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml b/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml index a5c3088016..d515c09e10 100644 --- a/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml @@ -66,7 +66,6 @@ properties: required: - compatible - reg - - "#pwm-cells" - clocks - clock-names diff --git a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml index bc813fe74f..195e437119 100644 --- a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml +++ b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml @@ -31,6 +31,7 @@ properties: - mediatek,mt8188-disp-pwm - mediatek,mt8192-disp-pwm - mediatek,mt8195-disp-pwm + - mediatek,mt8365-disp-pwm - const: mediatek,mt8183-disp-pwm reg: @@ -58,7 +59,6 @@ properties: required: - compatible - reg - - "#pwm-cells" - clocks - clock-names diff --git a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml index 15e7fd98de..9dc25f38fb 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml @@ -29,7 +29,6 @@ required: - compatible - reg - clocks - - "#pwm-cells" additionalProperties: false diff --git a/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml b/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml index 4d0b596444..7523a89a17 100644 --- a/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml +++ b/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml @@ -51,7 +51,6 @@ properties: required: - compatible - reg - - "#pwm-cells" - clocks - clock-names diff --git a/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml b/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml new file mode 100644 index 0000000000..ec6695c8d2 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/allwinner,sun20i-d1-system-ldos.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner D1 System LDOs + +maintainers: + - Samuel Holland + +description: + Allwinner D1 contains a pair of general-purpose LDOs which are designed to + supply power inside and outside the SoC. They are controlled by a register + within the system control MMIO space. + +properties: + compatible: + enum: + - allwinner,sun20i-d1-system-ldos + + reg: + maxItems: 1 + +patternProperties: + "^ldo[ab]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml index 9ff9abf269..51e2f6fb7a 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml @@ -41,6 +41,13 @@ allOf: - gpios properties: + $nodename: + anyOf: + - description: Preferred name is 'regulator-[0-9]v[0-9]' + pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$' + - description: Any name allowed + deprecated: true + compatible: enum: - regulator-fixed diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml index 3d469b8e97..849bfa50bd 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -28,6 +28,7 @@ properties: - nxp,pca9450a - nxp,pca9450b - nxp,pca9450c + - nxp,pca9451a reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml index 33ae1f7868..fcefc722ee 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -26,6 +26,7 @@ properties: - enum: - qcom,pm4125-vbus-reg - qcom,pm6150-vbus-reg + - qcom,pm7250b-vbus-reg - qcom,pmi632-vbus-reg - const: qcom,pm8150b-vbus-reg diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml index 05f4ad2c7d..6ceaffb45d 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml @@ -30,6 +30,10 @@ properties: vdda-supply: description: phandle to the vdda input analog voltage. + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml index 0f29c75f42..dddea27596 100644 --- a/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml +++ b/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml @@ -24,7 +24,7 @@ properties: type: object properties: - "SW": + SW: type: object $ref: regulator.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml index 507f98f73d..c5dc3c2820 100644 --- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml +++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml @@ -19,6 +19,7 @@ properties: - mediatek,mt8183-scp - mediatek,mt8186-scp - mediatek,mt8188-scp + - mediatek,mt8188-scp-dual - mediatek,mt8192-scp - mediatek,mt8195-scp - mediatek,mt8195-scp-dual @@ -194,6 +195,7 @@ allOf: properties: compatible: enum: + - mediatek,mt8188-scp-dual - mediatek,mt8195-scp-dual then: properties: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml index 971734085d..4d2055f283 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml @@ -231,7 +231,6 @@ allOf: - const: snoc_axi - const: mnoc_axi - const: qdss - glink-edge: false required: - pll-supply - smd-edge diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml index 06f5f93f62..bca59394ae 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml @@ -81,7 +81,11 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array description: Phandle reference to a syscon representing TCSR followed by the - three offsets within syscon for q6, modem and nc halt registers. + offset within syscon for q6 halt register. + items: + - items: + - description: phandle to TCSR syscon region + - description: offset to the Q6 halt register qcom,smem-states: $ref: /schemas/types.yaml#/definitions/phandle-array diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml index 9381c7022f..f4118b2da5 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml @@ -89,7 +89,11 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array description: Phandle reference to a syscon representing TCSR followed by the - three offsets within syscon for q6, modem and nc halt registers. + offset within syscon for q6 halt register. + items: + - items: + - description: phandle to TCSR syscon region + - description: offset to the Q6 halt register qcom,qmp: $ref: /schemas/types.yaml#/definitions/phandle diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml index 20df83a96e..a3c7487145 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml @@ -81,7 +81,11 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array description: Phandle reference to a syscon representing TCSR followed by the - three offsets within syscon for q6, modem and nc halt registers. + offset within syscon for q6 halt register. + items: + - items: + - description: phandle to TCSR syscon region + - description: offset to the Q6 halt register qcom,smem-states: $ref: /schemas/types.yaml#/definitions/phandle-array diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml index 02c85b420c..63500b1a0f 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml @@ -61,6 +61,7 @@ properties: description: Three entries specifying the outgoing ipc bit used for signaling the remote processor. + deprecated: true qcom,smd-edge: $ref: /schemas/types.yaml#/definitions/uint32 @@ -111,7 +112,7 @@ examples: smd-edge { interrupts = ; - qcom,ipc = <&apcs 8 8>; + mboxes = <&apcs 8>; qcom,smd-edge = <1>; }; }; diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml index 78aac69f10..6f13da11f5 100644 --- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml @@ -18,11 +18,26 @@ description: | properties: compatible: - const: xlnx,zynqmp-r5fss + enum: + - xlnx,zynqmp-r5fss + - xlnx,versal-r5fss + - xlnx,versal-net-r52fss + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: + description: | + Standard ranges definition providing address translations for + local R5F TCM address spaces to bus addresses. xlnx,cluster-mode: $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2] + default: 1 description: | The RPU MPCore can operate in split mode (Dual-processor performance), Safety lock-step mode(Both RPU cores execute the same code in lock-step, @@ -36,8 +51,16 @@ properties: 1: lockstep mode (default) 2: single cpu mode + xlnx,tcm-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Configure RPU TCM + 0: split mode + 1: lockstep mode + patternProperties: - "^r5f-[a-f0-9]+$": + "^r(.*)@[0-9a-f]+$": type: object description: | The RPU is located in the Low Power Domain of the Processor Subsystem. @@ -52,10 +75,22 @@ patternProperties: properties: compatible: - const: xlnx,zynqmp-r5f + enum: + - xlnx,zynqmp-r5f + - xlnx,versal-r5f + - xlnx,versal-net-r52f + + reg: + minItems: 1 + maxItems: 4 + + reg-names: + minItems: 1 + maxItems: 4 power-domains: - maxItems: 1 + minItems: 2 + maxItems: 5 mboxes: minItems: 1 @@ -101,35 +136,235 @@ patternProperties: required: - compatible + - reg + - reg-names - power-domains - unevaluatedProperties: false - required: - compatible + - "#address-cells" + - "#size-cells" + - ranges + +allOf: + - if: + properties: + compatible: + contains: + enum: + - xlnx,versal-net-r52fss + then: + properties: + xlnx,tcm-mode: false + + patternProperties: + "^r52f@[0-9a-f]+$": + type: object + + properties: + reg: + minItems: 1 + items: + - description: ATCM internal memory + - description: BTCM internal memory + - description: CTCM internal memory + + reg-names: + minItems: 1 + items: + - const: atcm0 + - const: btcm0 + - const: ctcm0 + + power-domains: + minItems: 2 + items: + - description: RPU core power domain + - description: ATCM power domain + - description: BTCM power domain + - description: CTCM power domain + + - if: + properties: + compatible: + contains: + enum: + - xlnx,zynqmp-r5fss + - xlnx,versal-r5fss + then: + if: + properties: + xlnx,cluster-mode: + enum: [1, 2] + then: + properties: + xlnx,tcm-mode: + enum: [1] + + patternProperties: + "^r5f@[0-9a-f]+$": + type: object + + properties: + reg: + minItems: 1 + items: + - description: ATCM internal memory + - description: BTCM internal memory + - description: extra ATCM memory in lockstep mode + - description: extra BTCM memory in lockstep mode + + reg-names: + minItems: 1 + items: + - const: atcm0 + - const: btcm0 + - const: atcm1 + - const: btcm1 + + power-domains: + minItems: 2 + items: + - description: RPU core power domain + - description: ATCM power domain + - description: BTCM power domain + - description: second ATCM power domain + - description: second BTCM power domain + + required: + - xlnx,tcm-mode + + else: + properties: + xlnx,tcm-mode: + enum: [0] + + patternProperties: + "^r5f@[0-9a-f]+$": + type: object + + properties: + reg: + minItems: 1 + items: + - description: ATCM internal memory + - description: BTCM internal memory + + reg-names: + minItems: 1 + items: + - const: atcm0 + - const: btcm0 + + power-domains: + minItems: 2 + items: + - description: RPU core power domain + - description: ATCM power domain + - description: BTCM power domain + + required: + - xlnx,tcm-mode additionalProperties: false examples: - | - remoteproc { - compatible = "xlnx,zynqmp-r5fss"; - xlnx,cluster-mode = <1>; - - r5f-0 { - compatible = "xlnx,zynqmp-r5f"; - power-domains = <&zynqmp_firmware 0x7>; - memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>; - mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>; - mbox-names = "tx", "rx"; + #include + + // Split mode configuration + soc { + #address-cells = <2>; + #size-cells = <2>; + + remoteproc@ffe00000 { + compatible = "xlnx,zynqmp-r5fss"; + xlnx,cluster-mode = <0>; + xlnx,tcm-mode = <0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>, + <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>, + <0x1 0x0 0x0 0xffe90000 0x0 0x10000>, + <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>; + + r5f@0 { + compatible = "xlnx,zynqmp-r5f"; + reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>; + reg-names = "atcm0", "btcm0"; + power-domains = <&zynqmp_firmware PD_RPU_0>, + <&zynqmp_firmware PD_R5_0_ATCM>, + <&zynqmp_firmware PD_R5_0_BTCM>; + memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, + <&rpu0vdev0vring0>, <&rpu0vdev0vring1>; + mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>; + mbox-names = "tx", "rx"; + }; + + r5f@1 { + compatible = "xlnx,zynqmp-r5f"; + reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>; + reg-names = "atcm0", "btcm0"; + power-domains = <&zynqmp_firmware PD_RPU_1>, + <&zynqmp_firmware PD_R5_1_ATCM>, + <&zynqmp_firmware PD_R5_1_BTCM>; + memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, + <&rpu1vdev0vring0>, <&rpu1vdev0vring1>; + mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>; + mbox-names = "tx", "rx"; + }; }; + }; + + - | + //Lockstep configuration + soc { + #address-cells = <2>; + #size-cells = <2>; + + remoteproc@ffe00000 { + compatible = "xlnx,zynqmp-r5fss"; + xlnx,cluster-mode = <1>; + xlnx,tcm-mode = <1>; + + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>, + <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>, + <0x0 0x10000 0x0 0xffe10000 0x0 0x10000>, + <0x0 0x30000 0x0 0xffe30000 0x0 0x10000>; + + r5f@0 { + compatible = "xlnx,zynqmp-r5f"; + reg = <0x0 0x0 0x0 0x10000>, + <0x0 0x20000 0x0 0x10000>, + <0x0 0x10000 0x0 0x10000>, + <0x0 0x30000 0x0 0x10000>; + reg-names = "atcm0", "btcm0", "atcm1", "btcm1"; + power-domains = <&zynqmp_firmware PD_RPU_0>, + <&zynqmp_firmware PD_R5_0_ATCM>, + <&zynqmp_firmware PD_R5_0_BTCM>, + <&zynqmp_firmware PD_R5_1_ATCM>, + <&zynqmp_firmware PD_R5_1_BTCM>; + memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, + <&rpu0vdev0vring0>, <&rpu0vdev0vring1>; + mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>; + mbox-names = "tx", "rx"; + }; - r5f-1 { - compatible = "xlnx,zynqmp-r5f"; - power-domains = <&zynqmp_firmware 0x8>; - memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>; - mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>; - mbox-names = "tx", "rx"; + r5f@1 { + compatible = "xlnx,zynqmp-r5f"; + reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>; + reg-names = "atcm0", "btcm0"; + power-domains = <&zynqmp_firmware PD_RPU_1>, + <&zynqmp_firmware PD_R5_1_ATCM>, + <&zynqmp_firmware PD_R5_1_BTCM>; + memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, + <&rpu1vdev0vring0>, <&rpu1vdev0vring1>; + mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>; + mbox-names = "tx", "rx"; + }; }; }; ... diff --git a/Documentation/devicetree/bindings/riscv/starfive.yaml b/Documentation/devicetree/bindings/riscv/starfive.yaml index cc4d92f0a1..b672f85219 100644 --- a/Documentation/devicetree/bindings/riscv/starfive.yaml +++ b/Documentation/devicetree/bindings/riscv/starfive.yaml @@ -26,6 +26,7 @@ properties: - items: - enum: + - milkv,mars - starfive,visionfive-2-v1.2a - starfive,visionfive-2-v1.3b - const: starfive,jh7110 diff --git a/Documentation/devicetree/bindings/rng/microsoft,vmgenid.yaml b/Documentation/devicetree/bindings/rng/microsoft,vmgenid.yaml new file mode 100644 index 0000000000..8f20dee93e --- /dev/null +++ b/Documentation/devicetree/bindings/rng/microsoft,vmgenid.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/microsoft,vmgenid.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Virtual Machine Generation ID + +maintainers: + - Jason A. Donenfeld + +description: + Firmwares or hypervisors can use this devicetree to describe an + interrupt and a shared resource to inject a Virtual Machine Generation ID. + Virtual Machine Generation ID is a globally unique identifier (GUID) and + the devicetree binding follows VMGenID specification defined in + http://go.microsoft.com/fwlink/?LinkId=260709. + +properties: + compatible: + const: microsoft,vmgenid + + reg: + description: + Specifies a 16-byte VMGenID in endianness-agnostic hexadecimal format. + maxItems: 1 + + interrupts: + description: + Interrupt used to notify that a new VMGenID is available. + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + rng@80000000 { + compatible = "microsoft,vmgenid"; + reg = <0x80000000 0x1000>; + interrupts = ; + }; + +... diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml index 717f6b321f..340d01d481 100644 --- a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml +++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml @@ -37,6 +37,10 @@ properties: description: If set, the RNG configuration in RNG_CR, RNG_HTCR and RNG_NSCR will be locked. + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt b/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt deleted file mode 100644 index 76ebca568d..0000000000 --- a/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt +++ /dev/null @@ -1,19 +0,0 @@ -* Alphascale asm9260 SoC Real Time Clock - -Required properties: -- compatible: Should be "alphascale,asm9260-rtc" -- reg: Physical base address of the controller and length - of memory mapped region. -- interrupts: IRQ line for the RTC. -- clocks: Reference to the clock entry. -- clock-names: should contain: - * "ahb" for the SoC RTC clock - -Example: -rtc0: rtc@800a0000 { - compatible = "alphascale,asm9260-rtc"; - reg = <0x800a0000 0x100>; - clocks = <&acc CLKID_AHB_RTC>; - clock-names = "ahb"; - interrupts = <2>; -}; diff --git a/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.yaml b/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.yaml new file mode 100644 index 0000000000..f955a7f638 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/alphascale,asm9260-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Alphascale asm9260 SoC Real Time Clock + +maintainers: + - Javier Carrasco + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + const: alphascale,asm9260-rtc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: ahb + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include + + rtc@800a0000 { + compatible = "alphascale,asm9260-rtc"; + reg = <0x800a0000 0x100>; + clocks = <&acc CLKID_AHB_RTC>; + clock-names = "ahb"; + interrupts = <2>; + }; diff --git a/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt deleted file mode 100644 index c3c9a1226f..0000000000 --- a/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt +++ /dev/null @@ -1,24 +0,0 @@ -* Real Time Clock of the Armada 38x/7K/8K SoCs - -RTC controller for the Armada 38x, 7K and 8K SoCs - -Required properties: -- compatible : Should be one of the following: - "marvell,armada-380-rtc" for Armada 38x SoC - "marvell,armada-8k-rtc" for Aramda 7K/8K SoCs -- reg: a list of base address and size pairs, one for each entry in - reg-names -- reg names: should contain: - * "rtc" for the RTC registers - * "rtc-soc" for the SoC related registers and among them the one - related to the interrupt. -- interrupts: IRQ line for the RTC. - -Example: - -rtc@a3800 { - compatible = "marvell,armada-380-rtc"; - reg = <0xa3800 0x20>, <0x184a0 0x0c>; - reg-names = "rtc", "rtc-soc"; - interrupts = ; -}; diff --git a/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt b/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt deleted file mode 100644 index d464986012..0000000000 --- a/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt +++ /dev/null @@ -1,17 +0,0 @@ -Conexant Digicolor Real Time Clock controller - -This binding currently supports the CX92755 SoC. - -Required properties: -- compatible: should be "cnxt,cx92755-rtc" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: rtc alarm interrupt - -Example: - - rtc@f0000c30 { - compatible = "cnxt,cx92755-rtc"; - reg = <0xf0000c30 0x18>; - interrupts = <25>; - }; diff --git a/Documentation/devicetree/bindings/rtc/fsl,stmp3xxx-rtc.yaml b/Documentation/devicetree/bindings/rtc/fsl,stmp3xxx-rtc.yaml new file mode 100644 index 0000000000..534de4196a --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/fsl,stmp3xxx-rtc.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/fsl,stmp3xxx-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMP3xxx/i.MX28 Time Clock Controller + +maintainers: + - Javier Carrasco + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx28-rtc + - fsl,imx23-rtc + - const: fsl,stmp3xxx-rtc + - const: fsl,stmp3xxx-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + stmp,crystal-freq: + description: + Override crystal frequency as determined from fuse bits. + Use <0> for "no crystal". + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 32000, 32768] + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + rtc@80056000 { + compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; + reg = <0x80056000 2000>; + interrupts = <29>; + }; diff --git a/Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt b/Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt deleted file mode 100644 index 634312dd95..0000000000 --- a/Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt +++ /dev/null @@ -1,17 +0,0 @@ -Android Goldfish RTC - -Android Goldfish RTC device used by Android emulator. - -Required properties: - -- compatible : should contain "google,goldfish-rtc" -- reg : -- interrupts : - -Example: - - goldfish_timer@9020000 { - compatible = "google,goldfish-rtc"; - reg = <0x9020000 0x1000>; - interrupts = <0x3>; - }; diff --git a/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt b/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt deleted file mode 100644 index a87a1e9bc0..0000000000 --- a/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt +++ /dev/null @@ -1,15 +0,0 @@ -* NXP LPC32xx SoC Real Time Clock controller - -Required properties: -- compatible: must be "nxp,lpc3220-rtc" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: The RTC interrupt - -Example: - - rtc@40024000 { - compatible = "nxp,lpc3220-rtc"; - reg = <0x40024000 0x1000>; - interrupts = <52 0>; - }; diff --git a/Documentation/devicetree/bindings/rtc/marvell,armada-380-rtc.yaml b/Documentation/devicetree/bindings/rtc/marvell,armada-380-rtc.yaml new file mode 100644 index 0000000000..adf3ba0cd0 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/marvell,armada-380-rtc.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/marvell,armada-380-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RTC controller for the Armada 38x, 7K and 8K SoCs + +maintainers: + - Javier Carrasco + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + enum: + - marvell,armada-380-rtc + - marvell,armada-8k-rtc + + reg: + items: + - description: RTC base address size + - description: Base address and size of SoC related registers + + reg-names: + items: + - const: rtc + - const: rtc-soc + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include + + rtc@a3800 { + compatible = "marvell,armada-380-rtc"; + reg = <0xa3800 0x20>, <0x184a0 0x0c>; + reg-names = "rtc", "rtc-soc"; + interrupts = ; + }; diff --git a/Documentation/devicetree/bindings/rtc/marvell,pxa-rtc.yaml b/Documentation/devicetree/bindings/rtc/marvell,pxa-rtc.yaml new file mode 100644 index 0000000000..43d68681a1 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/marvell,pxa-rtc.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/marvell,pxa-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PXA Real Time Clock + +maintainers: + - Javier Carrasco + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + const: marvell,pxa-rtc + + reg: + maxItems: 1 + + interrupts: + items: + - description: 1 Hz + - description: Alarm + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + rtc@40900000 { + compatible = "marvell,pxa-rtc"; + reg = <0x40900000 0x3c>; + interrupts = <30>, <31>; + }; diff --git a/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt b/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt deleted file mode 100644 index d0f937c355..0000000000 --- a/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt +++ /dev/null @@ -1,12 +0,0 @@ -* Maxim (Dallas) DS1742/DS1743 Real Time Clock - -Required properties: -- compatible: Should contain "maxim,ds1742". -- reg: Physical base address of the RTC and length of memory - mapped region. - -Example: - rtc: rtc@10000000 { - compatible = "maxim,ds1742"; - reg = <0x10000000 0x800>; - }; diff --git a/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt b/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt deleted file mode 100644 index 3c97bd1805..0000000000 --- a/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt +++ /dev/null @@ -1,21 +0,0 @@ -NXP LPC1788 real-time clock - -The LPC1788 RTC provides calendar and clock functionality -together with periodic tick and alarm interrupt support. - -Required properties: -- compatible : must contain "nxp,lpc1788-rtc" -- reg : Specifies base physical address and size of the registers. -- interrupts : A single interrupt specifier. -- clocks : Must contain clock specifiers for rtc and register clock -- clock-names : Must contain "rtc" and "reg" - See ../clocks/clock-bindings.txt for details. - -Example: -rtc: rtc@40046000 { - compatible = "nxp,lpc1788-rtc"; - reg = <0x40046000 0x1000>; - interrupts = <47>; - clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>; - clock-names = "rtc", "reg"; -}; diff --git a/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.yaml b/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.yaml new file mode 100644 index 0000000000..e88b847a1c --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/nxp,lpc1788-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC1788 real-time clock + +description: + The LPC1788 RTC provides calendar and clock functionality + together with periodic tick and alarm interrupt support. + +maintainers: + - Javier Carrasco + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + const: nxp,lpc1788-rtc + + reg: + maxItems: 1 + + clocks: + items: + - description: RTC clock + - description: Register clock + + clock-names: + items: + - const: rtc + - const: reg + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include + + rtc@40046000 { + compatible = "nxp,lpc1788-rtc"; + reg = <0x40046000 0x1000>; + clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>; + clock-names = "rtc", "reg"; + interrupts = <47>; + }; diff --git a/Documentation/devicetree/bindings/rtc/orion-rtc.txt b/Documentation/devicetree/bindings/rtc/orion-rtc.txt deleted file mode 100644 index 3bf63ffa51..0000000000 --- a/Documentation/devicetree/bindings/rtc/orion-rtc.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Mvebu Real Time Clock - -RTC controller for the Kirkwood, the Dove, the Armada 370 and the -Armada XP SoCs - -Required properties: -- compatible : Should be "marvell,orion-rtc" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: IRQ line for the RTC. - -Example: - -rtc@10300 { - compatible = "marvell,orion-rtc"; - reg = <0xd0010300 0x20>; - interrupts = <50>; -}; diff --git a/Documentation/devicetree/bindings/rtc/pxa-rtc.txt b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt deleted file mode 100644 index 8c6672a1b7..0000000000 --- a/Documentation/devicetree/bindings/rtc/pxa-rtc.txt +++ /dev/null @@ -1,14 +0,0 @@ -* PXA RTC - -PXA specific RTC driver. - -Required properties: -- compatible : Should be "marvell,pxa-rtc" - -Examples: - -rtc@40900000 { - compatible = "marvell,pxa-rtc"; - reg = <0x40900000 0x3c>; - interrupts = <30 31>; -}; diff --git a/Documentation/devicetree/bindings/rtc/rtc-aspeed.txt b/Documentation/devicetree/bindings/rtc/rtc-aspeed.txt deleted file mode 100644 index 2e956b3dc2..0000000000 --- a/Documentation/devicetree/bindings/rtc/rtc-aspeed.txt +++ /dev/null @@ -1,22 +0,0 @@ -ASPEED BMC RTC -============== - -Required properties: - - compatible: should be one of the following - * aspeed,ast2400-rtc for the ast2400 - * aspeed,ast2500-rtc for the ast2500 - * aspeed,ast2600-rtc for the ast2600 - - - reg: physical base address of the controller and length of memory mapped - region - - - interrupts: The interrupt number - -Example: - - rtc@1e781000 { - compatible = "aspeed,ast2400-rtc"; - reg = <0x1e781000 0x18>; - interrupts = <22>; - status = "disabled"; - }; diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt b/Documentation/devicetree/bindings/rtc/spear-rtc.txt deleted file mode 100644 index fecf8e4ad4..0000000000 --- a/Documentation/devicetree/bindings/rtc/spear-rtc.txt +++ /dev/null @@ -1,15 +0,0 @@ -* SPEAr RTC - -Required properties: -- compatible : "st,spear600-rtc" -- reg : Address range of the rtc registers -- interrupt: Should contain the rtc interrupt number - -Example: - - rtc@fc000000 { - compatible = "st,spear600-rtc"; - reg = <0xfc000000 0x1000>; - interrupt-parent = <&vic1>; - interrupts = <12>; - }; diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt deleted file mode 100644 index fa6a942266..0000000000 --- a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt +++ /dev/null @@ -1,21 +0,0 @@ -* STMP3xxx/i.MX28 Time Clock controller - -Required properties: -- compatible: should be one of the following. - * "fsl,stmp3xxx-rtc" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: rtc alarm interrupt - -Optional properties: -- stmp,crystal-freq: override crystal frequency as determined from fuse bits. - Only <32000> and <32768> are possible for the hardware. Use <0> for - "no crystal". - -Example: - -rtc@80056000 { - compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x80056000 2000>; - interrupts = <29>; -}; diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml index c9e3c5262c..fffd759c60 100644 --- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml @@ -24,6 +24,14 @@ properties: - abracon,abb5zes3 # AB-RTCMC-32.768kHz-EOZ9: Real Time Clock/Calendar Module with I2C Interface - abracon,abeoz9 + # ASPEED BMC ast2400 Real-time Clock + - aspeed,ast2400-rtc + # ASPEED BMC ast2500 Real-time Clock + - aspeed,ast2500-rtc + # ASPEED BMC ast2600 Real-time Clock + - aspeed,ast2600-rtc + # Conexant Digicolor Real Time Clock Controller + - cnxt,cx92755-rtc # I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output - dallas,ds1374 # Dallas DS1672 Real-time Clock @@ -38,19 +46,28 @@ properties: - epson,rx8025 - epson,rx8035 # I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM + - epson,rx8111 - epson,rx8571 # I2C-BUS INTERFACE REAL TIME CLOCK MODULE - epson,rx8581 + # Android Goldfish Real-time Clock + - google,goldfish-rtc # Intersil ISL1208 Low Power RTC with Battery Backed SRAM - isil,isl1208 # Intersil ISL1218 Low Power RTC with Battery Backed SRAM - isil,isl1218 + # Mvebu Real-time Clock + - marvell,orion-rtc + # Maxim DS1742/DS1743 Real-time Clock + - maxim,ds1742 # SPI-BUS INTERFACE REAL TIME CLOCK MODULE - maxim,mcp795 # Real Time Clock Module with I2C-Bus - microcrystal,rv3029 # Real Time Clock - microcrystal,rv8523 + # NXP LPC32xx SoC Real-time Clock + - nxp,lpc3220-rtc # Real-time Clock Module - pericom,pt7c4338 # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC @@ -67,6 +84,10 @@ properties: - ricoh,rv5c387a # 2-wire CMOS real-time clock - sii,s35390a + # ST SPEAr Real-time Clock + - st,spear600-rtc + # VIA/Wondermedia VT8500 Real-time Clock + - via,vt8500-rtc # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC - whwave,sd3078 # Xircom X1205 I2C RTC diff --git a/Documentation/devicetree/bindings/rtc/twl-rtc.txt b/Documentation/devicetree/bindings/rtc/twl-rtc.txt deleted file mode 100644 index 8f9a94f2f8..0000000000 --- a/Documentation/devicetree/bindings/rtc/twl-rtc.txt +++ /dev/null @@ -1,11 +0,0 @@ -* Texas Instruments TWL4030/6030 RTC - -Required properties: -- compatible : Should be "ti,twl4030-rtc" -- interrupts : Should be the interrupt number. - -Example: - rtc { - compatible = "ti,twl4030-rtc"; - interrupts = <11>; - }; diff --git a/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt deleted file mode 100644 index 3c0484c495..0000000000 --- a/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt +++ /dev/null @@ -1,15 +0,0 @@ -VIA/Wondermedia VT8500 Realtime Clock Controller ------------------------------------------------------ - -Required properties: -- compatible : "via,vt8500-rtc" -- reg : Should contain 1 register ranges(address and length) -- interrupts : alarm interrupt - -Example: - - rtc@d8100000 { - compatible = "via,vt8500-rtc"; - reg = <0xd8100000 0x10000>; - interrupts = <48>; - }; diff --git a/Documentation/devicetree/bindings/serial/actions,owl-uart.txt b/Documentation/devicetree/bindings/serial/actions,owl-uart.txt deleted file mode 100644 index aa873eada0..0000000000 --- a/Documentation/devicetree/bindings/serial/actions,owl-uart.txt +++ /dev/null @@ -1,16 +0,0 @@ -Actions Semi Owl UART - -Required properties: -- compatible : "actions,s500-uart", "actions,owl-uart" for S500 - "actions,s900-uart", "actions,owl-uart" for S900 -- reg : Offset and length of the register set for the device. -- interrupts : Should contain UART interrupt. - - -Example: - - uart3: serial@b0126000 { - compatible = "actions,s500-uart", "actions,owl-uart"; - reg = <0xb0126000 0x1000>; - interrupts = ; - }; diff --git a/Documentation/devicetree/bindings/serial/actions,owl-uart.yaml b/Documentation/devicetree/bindings/serial/actions,owl-uart.yaml new file mode 100644 index 0000000000..ab1c4514ae --- /dev/null +++ b/Documentation/devicetree/bindings/serial/actions,owl-uart.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/actions,owl-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi Owl UART + +maintainers: + - Kanak Shilledar + +allOf: + - $ref: serial.yaml + +properties: + compatible: + items: + - enum: + - actions,s500-uart + - actions,s900-uart + - const: actions,owl-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include + #include + uart0: serial@b0126000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb0126000 0x1000>; + clocks = <&cmu CLK_UART0>; + interrupts = ; + }; diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml index 2e189e5483..0565fb7649 100644 --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml @@ -54,7 +54,9 @@ properties: - const: amlogic,meson-gx-uart - description: UART controller on S4 compatible SoCs items: - - const: amlogic,t7-uart + - enum: + - amlogic,a4-uart + - amlogic,t7-uart - const: amlogic,meson-s4-uart reg: diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt deleted file mode 100644 index b5cc6297cd..0000000000 --- a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt +++ /dev/null @@ -1,18 +0,0 @@ -* BCM2835 AUXILIAR UART - -Required properties: - -- compatible: "brcm,bcm2835-aux-uart" -- reg: The base address of the UART register bank. -- interrupts: A single interrupt specifier. -- clocks: Clock driving the hardware; used to figure out the baud rate - divisor. - -Example: - - uart1: serial@7e215040 { - compatible = "brcm,bcm2835-aux-uart"; - reg = <0x7e215040 0x40>; - interrupts = <1 29>; - clocks = <&aux BCM2835_AUX_CLOCK_UART>; - }; diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml new file mode 100644 index 0000000000..6b72459f7d --- /dev/null +++ b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/brcm,bcm2835-aux-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM2835 AUXILIARY UART + +maintainers: + - Pratik Farkase + - Florian Fainelli + - Stefan Wahren + +allOf: + - $ref: serial.yaml + +properties: + compatible: + const: brcm,bcm2835-aux-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include + serial@7e215040 { + compatible = "brcm,bcm2835-aux-uart"; + reg = <0x7e215040 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_UART>; + }; diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml index 2129247d7c..d7f047b0bf 100644 --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml @@ -46,6 +46,9 @@ properties: power-domains: maxItems: 1 + resets: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml index 7a105551fa..4171f524a9 100644 --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml @@ -23,7 +23,9 @@ properties: oneOf: - const: fsl,s32v234-linflexuart - items: - - const: nxp,s32g2-linflexuart + - enum: + - nxp,s32g2-linflexuart + - nxp,s32g3-linflexuart - const: fsl,s32v234-linflexuart reg: diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index 4610a5bd58..f3a3eb2831 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -68,6 +68,7 @@ properties: - renesas,scif-r8a779a0 # R-Car V3U - renesas,scif-r8a779f0 # R-Car S4-8 - renesas,scif-r8a779g0 # R-Car V4H + - renesas,scif-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-scif # R-Car Gen4 - const: renesas,scif # generic SCIF compatible UART diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 62f97da1b2..2ed5261392 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -73,6 +73,10 @@ properties: enum: [1, 2, 4, 8, 12, 14, 16] default: 8 + access-controllers: + minItems: 1 + maxItems: 2 + allOf: - $ref: rs485.yaml# - $ref: serial.yaml# diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml index 4310bae6c5..4512390f90 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -58,20 +58,6 @@ patternProperties: required: - compatible -allOf: - - if: - not: - properties: - compatible: - contains: - enum: - - qcom,sm8450-pmic-glink - - qcom,sm8550-pmic-glink - - qcom,x1e80100-pmic-glink - then: - properties: - orientation-gpios: false - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml index 74bb92e315..fd6db0ca98 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml @@ -116,8 +116,8 @@ examples: bluetooth { compatible = "qcom,wcnss-bt"; - /* BD address 00:11:22:33:44:55 */ - local-bd-address = [ 55 44 33 22 11 00 ]; + /* Updated by boot firmware (little-endian order) */ + local-bd-address = [ 00 00 00 00 00 00 ]; }; wifi { diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml new file mode 100644 index 0000000000..ebbf0c9109 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/renesas/renesas,r9a09g057-sys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2H(P) System Controller (SYS) + +maintainers: + - Geert Uytterhoeven + +description: | + The RZ/V2H(P) SYS (System Controller) controls the overall + configuration of the LSI and supports the following functions, + - Trust zone control + - Extend access by specific masters to address beyond 4GB space + - GBETH configuration + - Control of settings and states of SRAM/PCIe/CM33/CA55/CR8/xSPI/ADC/TSU + - LSI version + - WDT stop control + - General registers + +properties: + compatible: + const: renesas,r9a09g057-sys + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - resets + +additionalProperties: false + +examples: + - | + sys: system-controller@10430000 { + compatible = "renesas,r9a09g057-sys"; + reg = <0x10430000 0x10000>; + clocks = <&cpg 1>; + resets = <&cpg 1>; + }; diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml index c1ce4da2dc..09d3ce97ef 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml @@ -513,6 +513,14 @@ properties: - renesas,rzv2mevk2 # RZ/V2M Eval Board v2.0 - const: renesas,r9a09g011 + - description: RZ/V2H(P) (R9A09G057) + items: + - enum: + - renesas,r9a09g057h41 # RZ/V2H + - renesas,r9a09g057h42 # RZ/V2H with Mali-G31 support + - renesas,r9a09g057h44 # RZ/V2HP with Mali-G31 + Mali-C55 support + - const: renesas,r9a09g057 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml index c0c6ce8fc7..3ca2205828 100644 --- a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml @@ -15,6 +15,7 @@ properties: - items: - enum: - google,gs101-apm-sysreg + - google,gs101-hsi2-sysreg - google,gs101-peric0-sysreg - google,gs101-peric1-sysreg - samsung,exynos3-sysreg @@ -72,6 +73,7 @@ allOf: compatible: contains: enum: + - google,gs101-hsi2-sysreg - google,gs101-peric0-sysreg - google,gs101-peric1-sysreg - samsung,exynos850-cmgp-sysreg diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml index b86f6f53ca..7140c312d8 100644 --- a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml +++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml @@ -365,9 +365,9 @@ allOf: additionalProperties: false dependencies: - "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] - "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] - "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"] + nvidia,suspend-mode: ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] + nvidia,core-pwr-off-time: ["nvidia,core-pwr-good-time"] + nvidia,cpu-pwr-off-time: ["nvidia,cpu-pwr-good-time"] examples: - | diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt deleted file mode 100644 index 3ffc2562fb..0000000000 --- a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt +++ /dev/null @@ -1,50 +0,0 @@ -Texas Instruments DaVinci McBSP module -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -This binding describes the "Multi-channel Buffered Serial Port" (McBSP) -audio interface found in some TI DaVinci processors like the OMAP-L138 or AM180x. - - -Required properties: -~~~~~~~~~~~~~~~~~~~~ -- compatible : - "ti,da850-mcbsp" : for DA850, AM180x and OPAM-L138 platforms - -- reg : physical base address and length of the controller memory mapped - region(s). -- reg-names : Should contain: - * "mpu" for the main registers (required). - * "dat" for the data FIFO (optional). - -- dmas: three element list of DMA controller phandles, DMA request line and - TC channel ordered triplets. -- dma-names: identifier string for each DMA request line in the dmas property. - These strings correspond 1:1 with the ordered pairs in dmas. The dma - identifiers must be "rx" and "tx". - -Optional properties: -~~~~~~~~~~~~~~~~~~~~ -- interrupts : Interrupt numbers for McBSP -- interrupt-names : Known interrupt names are "rx" and "tx" - -- pinctrl-0: Should specify pin control group used for this controller. -- pinctrl-names: Should contain only one value - "default", for more details - please refer to pinctrl-bindings.txt - -Example (AM1808): -~~~~~~~~~~~~~~~~~ - -mcbsp0: mcbsp@1d10000 { - compatible = "ti,da850-mcbsp"; - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp0_pins>; - - reg = <0x00110000 0x1000>, - <0x00310000 0x1000>; - reg-names = "mpu", "dat"; - interrupts = <97 98>; - interrupt-names = "rx", "tx"; - dmas = <&edma0 3 1 - &edma0 2 1>; - dma-names = "tx", "rx"; -}; diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml b/Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml new file mode 100644 index 0000000000..4fa6770238 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/davinci-mcbsp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: McBSP Controller for TI SoCs + +maintainers: + - Bastien Curutchet + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - ti,da850-mcbsp + + reg: + minItems: 1 + items: + - description: CFG registers + - description: data registers + + reg-names: + minItems: 1 + items: + - const: mpu + - const: dat + + dmas: + items: + - description: transmission DMA channel + - description: reception DMA channel + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + items: + - description: RX interrupt + - description: TX interrupt + + interrupt-names: + items: + - const: rx + - const: tx + + clocks: + minItems: 1 + items: + - description: functional clock + - description: external input clock for sample rate generator. + + clock-names: + minItems: 1 + items: + - const: fck + - const: clks + + power-domains: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + ti,T1-framing-tx: + $ref: /schemas/types.yaml#/definitions/flag + description: + If the property is present, tx data delay is set to 2 bit clock periods. + McBSP will insert a blank period (high-impedance period) before the first + data bit. This can be used to interface to T1-framing devices. + + ti,T1-framing-rx: + $ref: /schemas/types.yaml#/definitions/flag + description: + If the property is present, rx data delay is set to 2 bit clock periods. + McBSP will discard the bit preceding the data stream (called framing bit). + This can be used to interface to T1-framing devices. + +required: + - "#sound-dai-cells" + - compatible + - reg + - reg-names + - dmas + - dma-names + - clocks + +unevaluatedProperties: false + +examples: + - | + mcbsp0@1d10000 { + #sound-dai-cells = <0>; + compatible = "ti,da850-mcbsp"; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp0_pins>; + + reg = <0x111000 0x1000>, + <0x311000 0x1000>; + reg-names = "mpu", "dat"; + interrupts = <97>, <98>; + interrupt-names = "rx", "tx"; + dmas = <&edma0 3 1>, + <&edma0 2 1>; + dma-names = "tx", "rx"; + + clocks = <&psc1 14>; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl,audmix.txt b/Documentation/devicetree/bindings/sound/fsl,audmix.txt deleted file mode 100644 index 840b7e0d6a..0000000000 --- a/Documentation/devicetree/bindings/sound/fsl,audmix.txt +++ /dev/null @@ -1,50 +0,0 @@ -NXP Audio Mixer (AUDMIX). - -The Audio Mixer is a on-chip functional module that allows mixing of two -audio streams into a single audio stream. Audio Mixer has two input serial -audio interfaces. These are driven by two Synchronous Audio interface -modules (SAI). Each input serial interface carries 8 audio channels in its -frame in TDM manner. Mixer mixes audio samples of corresponding channels -from two interfaces into a single sample. Before mixing, audio samples of -two inputs can be attenuated based on configuration. The output of the -Audio Mixer is also a serial audio interface. Like input interfaces it has -the same TDM frame format. This output is used to drive the serial DAC TDM -interface of audio codec and also sent to the external pins along with the -receive path of normal audio SAI module for readback by the CPU. - -The output of Audio Mixer can be selected from any of the three streams - - serial audio input 1 - - serial audio input 2 - - mixed audio - -Mixing operation is independent of audio sample rate but the two audio -input streams must have same audio sample rate with same number of channels -in TDM frame to be eligible for mixing. - -Device driver required properties: -================================= - - compatible : Compatible list, contains "fsl,imx8qm-audmix" - - - reg : Offset and length of the register set for the device. - - - clocks : Must contain an entry for each entry in clock-names. - - - clock-names : Must include the "ipg" for register access. - - - power-domains : Must contain the phandle to AUDMIX power domain node - - - dais : Must contain a list of phandles to AUDMIX connected - DAIs. The current implementation requires two phandles - to SAI interfaces to be provided, the first SAI in the - list being used to route the AUDMIX output. - -Device driver configuration example: -====================================== - audmix: audmix@59840000 { - compatible = "fsl,imx8qm-audmix"; - reg = <0x0 0x59840000 0x0 0x10000>; - clocks = <&clk IMX8QXP_AUD_AUDMIX_IPG>; - clock-names = "ipg"; - power-domains = <&pd_audmix>; - dais = <&sai4>, <&sai5>; - }; diff --git a/Documentation/devicetree/bindings/sound/fsl,audmix.yaml b/Documentation/devicetree/bindings/sound/fsl,audmix.yaml new file mode 100644 index 0000000000..9413b901cf --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,audmix.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,audmix.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Audio Mixer (AUDMIX). + +maintainers: + - Shengjiu Wang + - Frank Li + +description: | + The Audio Mixer is a on-chip functional module that allows mixing of two + audio streams into a single audio stream. Audio Mixer has two input serial + audio interfaces. These are driven by two Synchronous Audio interface + modules (SAI). Each input serial interface carries 8 audio channels in its + frame in TDM manner. Mixer mixes audio samples of corresponding channels + from two interfaces into a single sample. Before mixing, audio samples of + two inputs can be attenuated based on configuration. The output of the + Audio Mixer is also a serial audio interface. Like input interfaces it has + the same TDM frame format. This output is used to drive the serial DAC TDM + interface of audio codec and also sent to the external pins along with the + receive path of normal audio SAI module for readback by the CPU. + + The output of Audio Mixer can be selected from any of the three streams + - serial audio input 1 + - serial audio input 2 + - mixed audio + + Mixing operation is independent of audio sample rate but the two audio + input streams must have same audio sample rate with same number of channels + in TDM frame to be eligible for mixing. + +properties: + compatible: + const: fsl,imx8qm-audmix + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ipg + + power-domains: + maxItems: 1 + + dais: + description: contain a list of phandles to AUDMIX connected DAIs. + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 2 + items: + - description: the AUDMIX output + maxItems: 1 + - description: serial audio input 1 + maxItems: 1 + - description: serial audio input 2 + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + - dais + +unevaluatedProperties: false + +examples: + - | + audmix@59840000 { + compatible = "fsl,imx8qm-audmix"; + reg = <0x59840000 0x10000>; + clocks = <&amix_lpcg 0>; + clock-names = "ipg"; + power-domains = <&pd_audmix>; + dais = <&sai4>, <&sai5>; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt deleted file mode 100644 index 90112ca1ff..0000000000 --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt +++ /dev/null @@ -1,68 +0,0 @@ -Freescale Enhanced Serial Audio Interface (ESAI) Controller - -The Enhanced Serial Audio Interface (ESAI) provides a full-duplex serial port -for serial communication with a variety of serial devices, including industry -standard codecs, Sony/Phillips Digital Interface (S/PDIF) transceivers, and -other DSPs. It has up to six transmitters and four receivers. - -Required properties: - - - compatible : Compatible list, should contain one of the following - compatibles: - "fsl,imx35-esai", - "fsl,vf610-esai", - "fsl,imx6ull-esai", - "fsl,imx8qm-esai", - - - reg : Offset and length of the register set for the device. - - - interrupts : Contains the spdif interrupt. - - - dmas : Generic dma devicetree binding as described in - Documentation/devicetree/bindings/dma/dma.txt. - - - dma-names : Two dmas have to be defined, "tx" and "rx". - - - clocks : Contains an entry for each entry in clock-names. - - - clock-names : Includes the following entries: - "core" The core clock used to access registers - "extal" The esai baud clock for esai controller used to - derive HCK, SCK and FS. - "fsys" The system clock derived from ahb clock used to - derive HCK, SCK and FS. - "spba" The spba clock is required when ESAI is placed as a - bus slave of the Shared Peripheral Bus and when two - or more bus masters (CPU, DMA or DSP) try to access - it. This property is optional depending on the SoC - design. - - - fsl,fifo-depth : The number of elements in the transmit and receive - FIFOs. This number is the maximum allowed value for - TFCR[TFWM] or RFCR[RFWM]. - - - fsl,esai-synchronous: This is a boolean property. If present, indicating - that ESAI would work in the synchronous mode, which - means all the settings for Receiving would be - duplicated from Transmission related registers. - -Optional properties: - - - big-endian : If this property is absent, the native endian mode - will be in use as default, or the big endian mode - will be in use for all the device registers. - -Example: - -esai: esai@2024000 { - compatible = "fsl,imx35-esai"; - reg = <0x02024000 0x4000>; - interrupts = <0 51 0x04>; - clocks = <&clks 208>, <&clks 118>, <&clks 208>; - clock-names = "core", "extal", "fsys"; - dmas = <&sdma 23 21 0>, <&sdma 24 21 0>; - dma-names = "rx", "tx"; - fsl,fifo-depth = <128>; - fsl,esai-synchronous; - big-endian; -}; diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.yaml b/Documentation/devicetree/bindings/sound/fsl,esai.yaml new file mode 100644 index 0000000000..f99ed20fa6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,esai.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,esai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Enhanced Serial Audio Interface (ESAI) Controller + +maintainers: + - Shengjiu Wang + - Frank Li + +description: + The Enhanced Serial Audio Interface (ESAI) provides a full-duplex serial port + for serial communication with a variety of serial devices, including industry + standard codecs, Sony/Phillips Digital Interface (S/PDIF) transceivers, and + other DSPs. It has up to six transmitters and four receivers. + +properties: + compatible: + enum: + - fsl,imx35-esai + - fsl,imx6ull-esai + - fsl,imx8qm-esai + - fsl,vf610-esai + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + items: + - description: + The core clock used to access registers. + - description: + The esai baud clock for esai controller used to + derive HCK, SCK and FS. + - description: + The system clock derived from ahb clock used to + derive HCK, SCK and FS. + - description: + The spba clock is required when ESAI is placed as a + bus slave of the Shared Peripheral Bus and when two + or more bus masters (CPU, DMA or DSP) try to access + it. This property is optional depending on the SoC + design. + + clock-names: + minItems: 3 + items: + - const: core + - const: extal + - const: fsys + - const: spba + + dmas: + minItems: 2 + maxItems: 2 + + dma-names: + items: + - const: rx + - const: tx + + fsl,fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 64 + description: + The number of elements in the transmit and receive + FIFOs. This number is the maximum allowed value for + TFCR[TFWM] or RFCR[RFWM]. + + fsl,esai-synchronous: + $ref: /schemas/types.yaml#/definitions/flag + description: + This is a boolean property. If present, indicating + that ESAI would work in the synchronous mode, which + means all the settings for Receiving would be + duplicated from Transmission related registers. + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: + If this property is absent, the native endian mode + will be in use as default, or the big endian mode + will be in use for all the device registers. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +unevaluatedProperties: false + +allOf: + - $ref: dai-common.yaml# + +examples: + - | + esai@2024000 { + compatible = "fsl,imx35-esai"; + reg = <0x02024000 0x4000>; + interrupts = <0 51 0x04>; + clocks = <&clks 208>, <&clks 118>, <&clks 208>; + clock-names = "core", "extal", "fsys"; + dmas = <&sdma 23 21 0>, <&sdma 24 21 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <128>; + fsl,esai-synchronous; + big-endian; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml index bfef2fcb75..76aa1f2484 100644 --- a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml @@ -74,6 +74,9 @@ properties: - const: asrck_f - const: spba + power-domains: + maxItems: 1 + fsl,asrc-rate: $ref: /schemas/types.yaml#/definitions/uint32 description: The mutual sample rate used by DPCM Back Ends @@ -131,6 +134,17 @@ allOf: properties: fsl,asrc-clk-map: false + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qm-asrc + - fsl,imx8qxp-asrc + then: + required: + - power-domains + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/sound/fsl,imx-audio-spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,imx-audio-spdif.yaml new file mode 100644 index 0000000000..5fc543d02e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,imx-audio-spdif.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,imx-audio-spdif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX audio complex with S/PDIF transceiver + +maintainers: + - Shengjiu Wang + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx-sabreauto-spdif + - fsl,imx6sx-sdb-spdif + - const: fsl,imx-audio-spdif + - enum: + - fsl,imx-audio-spdif + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + + spdif-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the i.MX S/PDIF controller + + spdif-out: + type: boolean + description: + If present, the transmitting function of S/PDIF will be enabled, + indicating there's a physical S/PDIF out connector or jack on the + board or it's connecting to some other IP block, such as an HDMI + encoder or display-controller. + + spdif-in: + type: boolean + description: + If present, the receiving function of S/PDIF will be enabled, + indicating there is a physical S/PDIF in connector/jack on the board. + +required: + - compatible + - model + - spdif-controller + +anyOf: + - required: + - spdif-in + - required: + - spdif-out + +additionalProperties: false + +examples: + - | + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + spdif-in; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl,sai.yaml b/Documentation/devicetree/bindings/sound/fsl,sai.yaml index 2456d958ad..a5d9c246cc 100644 --- a/Documentation/devicetree/bindings/sound/fsl,sai.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,sai.yaml @@ -81,14 +81,12 @@ properties: dmas: minItems: 1 - items: - - description: DMA controller phandle and request line for RX - - description: DMA controller phandle and request line for TX + maxItems: 2 dma-names: minItems: 1 items: - - const: rx + - enum: [ rx, tx ] - const: tx interrupts: diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml index 1d64e8337a..204f361cea 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml @@ -31,7 +31,10 @@ properties: maxItems: 1 interrupts: - maxItems: 1 + minItems: 1 + items: + - description: Combined or receive interrupt + - description: Transmit interrupt dmas: items: @@ -86,6 +89,9 @@ properties: registers. Set this flag for HCDs with big endian descriptors and big endian registers. + power-domains: + maxItems: 1 + required: - compatible - reg @@ -97,6 +103,33 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + enum: + - fsl,imx8qm-spdif + - fsl,imx8qxp-spdif + then: + properties: + interrupts: + minItems: 2 + else: + properties: + interrupts: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qm-spdif + - fsl,imx8qxp-spdif + then: + required: + - power-domains + examples: - | spdif@2004000 { diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt deleted file mode 100644 index 7e15a85cec..0000000000 --- a/Documentation/devicetree/bindings/sound/fsl,ssi.txt +++ /dev/null @@ -1,87 +0,0 @@ -Freescale Synchronous Serial Interface - -The SSI is a serial device that communicates with audio codecs. It can -be programmed in AC97, I2S, left-justified, or right-justified modes. - -Required properties: -- compatible: Compatible list, should contain one of the following - compatibles: - fsl,mpc8610-ssi - fsl,imx51-ssi - fsl,imx35-ssi - fsl,imx21-ssi -- cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on. -- reg: Offset and length of the register set for the device. -- interrupts: where a is the interrupt number and b is a - field that represents an encoding of the sense and - level information for the interrupt. This should be - encoded based on the information in section 2) - depending on the type of interrupt controller you - have. -- fsl,fifo-depth: The number of elements in the transmit and receive FIFOs. - This number is the maximum allowed value for SFCSR[TFWM0]. - - clocks: "ipg" - Required clock for the SSI unit - "baud" - Required clock for SSI master mode. Otherwise this - clock is not used - -Required are also ac97 link bindings if ac97 is used. See -Documentation/devicetree/bindings/sound/soc-ac97link.txt for the necessary -bindings. - -Optional properties: -- codec-handle: Phandle to a 'codec' node that defines an audio - codec connected to this SSI. This node is typically - a child of an I2C or other control node. -- fsl,fiq-stream-filter: Bool property. Disabled DMA and use FIQ instead to - filter the codec stream. This is necessary for some boards - where an incompatible codec is connected to this SSI, e.g. - on pca100 and pcm043. -- dmas: Generic dma devicetree binding as described in - Documentation/devicetree/bindings/dma/dma.txt. -- dma-names: Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq - is not defined. -- fsl,mode: The operating mode for the AC97 interface only. - "ac97-slave" - AC97 mode, SSI is clock slave - "ac97-master" - AC97 mode, SSI is clock master -- fsl,ssi-asynchronous: - If specified, the SSI is to be programmed in asynchronous - mode. In this mode, pins SRCK, STCK, SRFS, and STFS must - all be connected to valid signals. In synchronous mode, - SRCK and SRFS are ignored. Asynchronous mode allows - playback and capture to use different sample sizes and - sample rates. Some drivers may require that SRCK and STCK - be connected together, and SRFS and STFS be connected - together. This would still allow different sample sizes, - but not different sample rates. -- fsl,playback-dma: Phandle to a node for the DMA channel to use for - playback of audio. This is typically dictated by SOC - design. See the notes below. - Only used on Power Architecture. -- fsl,capture-dma: Phandle to a node for the DMA channel to use for - capture (recording) of audio. This is typically dictated - by SOC design. See the notes below. - Only used on Power Architecture. - -Child 'codec' node required properties: -- compatible: Compatible list, contains the name of the codec - -Child 'codec' node optional properties: -- clock-frequency: The frequency of the input clock, which typically comes - from an on-board dedicated oscillator. - -Notes on fsl,playback-dma and fsl,capture-dma: - -On SOCs that have an SSI, specific DMA channels are hard-wired for playback -and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for -playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for -playback and DMA channel 3 for capture. The developer can choose which -DMA controller to use, but the channels themselves are hard-wired. The -purpose of these two properties is to represent this hardware design. - -The device tree nodes for the DMA channels that are referenced by -"fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with -"fsl,ssi-dma-channel". The SOC-specific compatible string (e.g. -"fsl,mpc8610-dma-channel") can remain. If these nodes are left as -"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA -drivers (fsldma) will attempt to use them, and it will conflict with the -sound drivers. diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.yaml b/Documentation/devicetree/bindings/sound/fsl,ssi.yaml new file mode 100644 index 0000000000..4ab10cd3b5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,ssi.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,ssi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Synchronous Serial Interface + +maintainers: + - Shengjiu Wang + +description: + Notes on fsl,playback-dma and fsl,capture-dma + On SOCs that have an SSI, specific DMA channels are hard-wired for playback + and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for + playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for + playback and DMA channel 3 for capture. The developer can choose which + DMA controller to use, but the channels themselves are hard-wired. The + purpose of these two properties is to represent this hardware design. + + The device tree nodes for the DMA channels that are referenced by + "fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with + "fsl,ssi-dma-channel". The SOC-specific compatible string (e.g. + "fsl,mpc8610-dma-channel") can remain. If these nodes are left as + "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA + drivers (fsldma) will attempt to use them, and it will conflict with the + sound drivers. + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx50-ssi + - fsl,imx53-ssi + - const: fsl,imx51-ssi + - const: fsl,imx21-ssi + - items: + - enum: + - fsl,imx25-ssi + - fsl,imx27-ssi + - fsl,imx35-ssi + - fsl,imx51-ssi + - const: fsl,imx21-ssi + - items: + - enum: + - fsl,imx6q-ssi + - fsl,imx6sl-ssi + - fsl,imx6sx-ssi + - const: fsl,imx51-ssi + - items: + - const: fsl,imx21-ssi + - items: + - const: fsl,mpc8610-ssi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The ipg clock for register access + - description: clock for SSI master mode + minItems: 1 + + clock-names: + items: + - const: ipg + - const: baud + minItems: 1 + + dmas: + oneOf: + - items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + - items: + - description: DMA controller phandle and request line for RX0 + - description: DMA controller phandle and request line for TX0 + - description: DMA controller phandle and request line for RX1 + - description: DMA controller phandle and request line for TX1 + + dma-names: + oneOf: + - items: + - const: rx + - const: tx + - items: + - const: rx0 + - const: tx0 + - const: rx1 + - const: tx1 + + "#sound-dai-cells": + const: 0 + description: optional, some dts node didn't add it. + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: The SSI index + + ac97-gpios: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: Please refer to soc-ac97link.txt + + codec-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to a 'codec' node that defines an audio + codec connected to this SSI. This node is typically + a child of an I2C or other control node. + + fsl,fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The number of elements in the transmit and receive FIFOs. + This number is the maximum allowed value for SFCSR[TFWM0]. + enum: [8, 15] + + fsl,fiq-stream-filter: + type: boolean + description: + Disabled DMA and use FIQ instead to filter the codec stream. + This is necessary for some boards where an incompatible codec + is connected to this SSI, e.g. on pca100 and pcm043. + + fsl,mode: + $ref: /schemas/types.yaml#/definitions/string + enum: [ ac97-slave, ac97-master, i2s-slave, i2s-master, + lj-slave, lj-master, rj-slave, rj-master ] + description: | + "ac97-slave" - AC97 mode, SSI is clock slave + "ac97-master" - AC97 mode, SSI is clock master + "i2s-slave" - I2S mode, SSI is clock slave + "i2s-master" - I2S mode, SSI is clock master + "lj-slave" - Left justified mode, SSI is clock slave + "lj-master" - Left justified mode, SSI is clock master + "rj-slave" - Right justified mode, SSI is clock slave + "rj-master" - Right justified mode, SSI is clock master + + fsl,ssi-asynchronous: + type: boolean + description: If specified, the SSI is to be programmed in asynchronous + mode. In this mode, pins SRCK, STCK, SRFS, and STFS must + all be connected to valid signals. In synchronous mode, + SRCK and SRFS are ignored. Asynchronous mode allows + playback and capture to use different sample sizes and + sample rates. Some drivers may require that SRCK and STCK + be connected together, and SRFS and STFS be connected + together. This would still allow different sample sizes, + but not different sample rates. + + fsl,playback-dma: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to a node for the DMA channel to use for + playback of audio. This is typically dictated by SOC + design. Only used on Power Architecture. + + fsl,capture-dma: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to a node for the DMA channel to use for + capture (recording) of audio. This is typically dictated + by SOC design. Only used on Power Architecture. + +required: + - compatible + - reg + - interrupts + - fsl,fifo-depth + +allOf: + - $ref: dai-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include + #include + ssi@2028000 { + compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; + reg = <0x02028000 0x4000>; + interrupts = ; + clocks = <&clks IMX6QDL_CLK_SSI1_IPG>, + <&clks IMX6QDL_CLK_SSI1>; + clock-names = "ipg", "baud"; + dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; + fsl,fifo-depth = <15>; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt deleted file mode 100644 index 4e8dbc5abf..0000000000 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ /dev/null @@ -1,117 +0,0 @@ -Freescale Generic ASoC Sound Card with ASRC support - -The Freescale Generic ASoC Sound Card can be used, ideally, for all Freescale -SoCs connecting with external CODECs. - -The idea of this generic sound card is a bit like ASoC Simple Card. However, -for Freescale SoCs (especially those released in recent years), most of them -have ASRC (Documentation/devicetree/bindings/sound/fsl,asrc.txt) inside. And -this is a specific feature that might be painstakingly controlled and merged -into the Simple Card. - -So having this generic sound card allows all Freescale SoC users to benefit -from the simplification of a new card support and the capability of the wide -sample rates support through ASRC. - -Note: The card is initially designed for those sound cards who use AC'97, I2S - and PCM DAI formats. However, it'll be also possible to support those non - AC'97/I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as - long as the driver has been properly upgraded. - - -The compatible list for this generic sound card currently: - "fsl,imx-audio-ac97" - - "fsl,imx-audio-cs42888" - - "fsl,imx-audio-cs427x" - (compatible with CS4271 and CS4272) - - "fsl,imx-audio-wm8962" - - "fsl,imx-audio-sgtl5000" - (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt) - - "fsl,imx-audio-wm8960" - - "fsl,imx-audio-mqs" - - "fsl,imx-audio-wm8524" - - "fsl,imx-audio-tlv320aic32x4" - - "fsl,imx-audio-tlv320aic31xx" - - "fsl,imx-audio-si476x" - - "fsl,imx-audio-wm8958" - - "fsl,imx-audio-nau8822" - -Required properties: - - - compatible : Contains one of entries in the compatible list. - - - model : The user-visible name of this sound complex - - - audio-cpu : The phandle of an CPU DAI controller - - - audio-codec : The phandle of an audio codec - -Optional properties: - - - audio-asrc : The phandle of ASRC. It can be absent if there's no - need to add ASRC support via DPCM. - - - audio-routing : A list of the connections between audio components. - Each entry is a pair of strings, the first being the - connection's sink, the second being the connection's - source. There're a few pre-designed board connectors: - * Line Out Jack - * Line In Jack - * Headphone Jack - * Mic Jack - * Ext Spk - * AMIC (stands for Analog Microphone Jack) - * DMIC (stands for Digital Microphone Jack) - - Note: The "Mic Jack" and "AMIC" are redundant while - coexisting in order to support the old bindings - of wm8962 and sgtl5000. - - - hp-det-gpio : The GPIO that detect headphones are plugged in - - mic-det-gpio : The GPIO that detect microphones are plugged in - - bitclock-master : Indicates dai-link bit clock master; for details see simple-card.yaml. - - frame-master : Indicates dai-link frame master; for details see simple-card.yaml. - - dai-format : audio format, for details see simple-card.yaml. - - frame-inversion : dai-link uses frame clock inversion, for details see simple-card.yaml. - - bitclock-inversion : dai-link uses bit clock inversion, for details see simple-card.yaml. - - mclk-id : main clock id, specific for each card configuration. - -Optional unless SSI is selected as a CPU DAI: - - - mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) - - - mux-ext-port : The external port of the i.MX audio muxer - -Example: -sound-cs42888 { - compatible = "fsl,imx-audio-cs42888"; - model = "cs42888-audio"; - audio-cpu = <&esai>; - audio-asrc = <&asrc>; - audio-codec = <&cs42888>; - audio-routing = - "Line Out Jack", "AOUT1L", - "Line Out Jack", "AOUT1R", - "Line Out Jack", "AOUT2L", - "Line Out Jack", "AOUT2R", - "Line Out Jack", "AOUT3L", - "Line Out Jack", "AOUT3R", - "Line Out Jack", "AOUT4L", - "Line Out Jack", "AOUT4R", - "AIN1L", "Line In Jack", - "AIN1R", "Line In Jack", - "AIN2L", "Line In Jack", - "AIN2R", "Line In Jack"; -}; diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.yaml b/Documentation/devicetree/bindings/sound/fsl-asoc-card.yaml new file mode 100644 index 0000000000..9922664d5c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.yaml @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl-asoc-card.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Generic ASoC Sound Card with ASRC support + +description: + The Freescale Generic ASoC Sound Card can be used, ideally, + for all Freescale SoCs connecting with external CODECs. + + The idea of this generic sound card is a bit like ASoC Simple Card. + However, for Freescale SoCs (especially those released in recent years), + most of them have ASRC inside. And this is a specific feature that might + be painstakingly controlled and merged into the Simple Card. + + So having this generic sound card allows all Freescale SoC users to + benefit from the simplification of a new card support and the capability + of the wide sample rates support through ASRC. + + Note, The card is initially designed for those sound cards who use AC'97, I2S + and PCM DAI formats. However, it'll be also possible to support those non + AC'97/I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as + long as the driver has been properly upgraded. + +maintainers: + - Shengjiu Wang + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx-sgtl5000 + - fsl,imx25-pdk-sgtl5000 + - fsl,imx53-cpuvo-sgtl5000 + - fsl,imx51-babbage-sgtl5000 + - fsl,imx53-m53evk-sgtl5000 + - fsl,imx53-qsb-sgtl5000 + - fsl,imx53-voipac-sgtl5000 + - fsl,imx6-armadeus-sgtl5000 + - fsl,imx6-rex-sgtl5000 + - fsl,imx6-sabreauto-cs42888 + - fsl,imx6-wandboard-sgtl5000 + - fsl,imx6dl-nit6xlite-sgtl5000 + - fsl,imx6q-ba16-sgtl5000 + - fsl,imx6q-nitrogen6_max-sgtl5000 + - fsl,imx6q-nitrogen6_som2-sgtl5000 + - fsl,imx6q-nitrogen6x-sgtl5000 + - fsl,imx6q-sabrelite-sgtl5000 + - fsl,imx6q-sabresd-wm8962 + - fsl,imx6q-udoo-ac97 + - fsl,imx6q-ventana-sgtl5000 + - fsl,imx6sl-evk-wm8962 + - fsl,imx6sx-sdb-mqs + - fsl,imx6sx-sdb-wm8962 + - fsl,imx7d-evk-wm8960 + - karo,tx53-audio-sgtl5000 + - tq,imx53-mba53-sgtl5000 + - enum: + - fsl,imx-audio-ac97 + - fsl,imx-audio-cs42888 + - fsl,imx-audio-mqs + - fsl,imx-audio-sgtl5000 + - fsl,imx-audio-wm8960 + - fsl,imx-audio-wm8962 + - items: + - enum: + - fsl,imx-audio-ac97 + - fsl,imx-audio-cs42888 + - fsl,imx-audio-cs427x + - fsl,imx-audio-mqs + - fsl,imx-audio-nau8822 + - fsl,imx-audio-sgtl5000 + - fsl,imx-audio-si476x + - fsl,imx-audio-tlv320aic31xx + - fsl,imx-audio-tlv320aic32x4 + - fsl,imx-audio-wm8524 + - fsl,imx-audio-wm8904 + - fsl,imx-audio-wm8960 + - fsl,imx-audio-wm8962 + - fsl,imx-audio-wm8958 + + model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex + + audio-asrc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of ASRC. It can be absent if there's no + need to add ASRC support via DPCM. + + audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of an audio codec + + audio-cpu: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of an CPU DAI controller + + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. There're a few pre-designed board + connectors. "AMIC" stands for Analog Microphone Jack. + "DMIC" stands for Digital Microphone Jack. The "Mic Jack" and "AMIC" + are redundant while coexisting in order to support the old bindings + of wm8962 and sgtl5000. + + hp-det-gpio: + deprecated: true + maxItems: 1 + description: The GPIO that detect headphones are plugged in + + hp-det-gpios: + maxItems: 1 + description: The GPIO that detect headphones are plugged in + + mic-det-gpio: + deprecated: true + maxItems: 1 + description: The GPIO that detect microphones are plugged in + + mic-det-gpios: + maxItems: 1 + description: The GPIO that detect microphones are plugged in + + bitclock-master: + $ref: simple-card.yaml#/definitions/bitclock-master + description: Indicates dai-link bit clock master. + + frame-master: + $ref: simple-card.yaml#/definitions/frame-master + description: Indicates dai-link frame master. + + format: + $ref: simple-card.yaml#/definitions/format + description: audio format. + + frame-inversion: + $ref: simple-card.yaml#/definitions/frame-inversion + description: dai-link uses frame clock inversion. + + bitclock-inversion: + $ref: simple-card.yaml#/definitions/bitclock-inversion + description: dai-link uses bit clock inversion. + + mclk-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: main clock id, specific for each card configuration. + + mux-int-port: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 7] + description: The internal port of the i.MX audio muxer (AUDMUX) + + mux-ext-port: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [3, 4, 5, 6] + description: The external port of the i.MX audio muxer + + ssi-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of an CPU DAI controller + +required: + - compatible + - model + +unevaluatedProperties: false + +examples: + - | + sound-cs42888 { + compatible = "fsl,imx-audio-cs42888"; + model = "cs42888-audio"; + audio-cpu = <&esai>; + audio-asrc = <&asrc>; + audio-codec = <&cs42888>; + audio-routing = + "Line Out Jack", "AOUT1L", + "Line Out Jack", "AOUT1R", + "Line Out Jack", "AOUT2L", + "Line Out Jack", "AOUT2R", + "Line Out Jack", "AOUT3L", + "Line Out Jack", "AOUT3R", + "Line Out Jack", "AOUT4L", + "Line Out Jack", "AOUT4R", + "AIN1L", "Line In Jack", + "AIN1R", "Line In Jack", + "AIN2L", "Line In Jack", + "AIN2R", "Line In Jack"; + }; diff --git a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt deleted file mode 100644 index da84a442cc..0000000000 --- a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt +++ /dev/null @@ -1,36 +0,0 @@ -Freescale i.MX audio complex with S/PDIF transceiver - -Required properties: - - - compatible : "fsl,imx-audio-spdif" - - - model : The user-visible name of this sound complex - - - spdif-controller : The phandle of the i.MX S/PDIF controller - - -Optional properties: - - - spdif-out : This is a boolean property. If present, the - transmitting function of S/PDIF will be enabled, - indicating there's a physical S/PDIF out connector - or jack on the board or it's connecting to some - other IP block, such as an HDMI encoder or - display-controller. - - - spdif-in : This is a boolean property. If present, the receiving - function of S/PDIF will be enabled, indicating there - is a physical S/PDIF in connector/jack on the board. - -* Note: At least one of these two properties should be set in the DT binding. - - -Example: - -sound-spdif { - compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; - spdif-in; -}; diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt2701-wm8960.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt2701-wm8960.yaml new file mode 100644 index 0000000000..cf985461a9 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mediatek,mt2701-wm8960.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt2701-wm8960.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT2701 with WM8960 CODEC + +maintainers: + - Kartik Agarwala + +properties: + compatible: + const: mediatek,mt2701-wm8960-machine + + mediatek,platform: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of MT2701 ASoC platform. + + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. + + mediatek,audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the WM8960 audio codec. + +unevaluatedProperties: false + +required: + - compatible + - mediatek,platform + - audio-routing + - mediatek,audio-codec + - pinctrl-names + - pinctrl-0 + +examples: + - | + sound { + compatible = "mediatek,mt2701-wm8960-machine"; + mediatek,platform = <&afe>; + audio-routing = + "Headphone", "HP_L", + "Headphone", "HP_R", + "LINPUT1", "AMIC", + "RINPUT1", "AMIC"; + mediatek,audio-codec = <&wm8960>; + pinctrl-names = "default"; + pinctrl-0 = <&aud_pins_default>; + }; diff --git a/Documentation/devicetree/bindings/sound/mt2701-wm8960.txt b/Documentation/devicetree/bindings/sound/mt2701-wm8960.txt deleted file mode 100644 index 809b609ea9..0000000000 --- a/Documentation/devicetree/bindings/sound/mt2701-wm8960.txt +++ /dev/null @@ -1,24 +0,0 @@ -MT2701 with WM8960 CODEC - -Required properties: -- compatible: "mediatek,mt2701-wm8960-machine" -- mediatek,platform: the phandle of MT2701 ASoC platform -- audio-routing: a list of the connections between audio -- mediatek,audio-codec: the phandles of wm8960 codec -- pinctrl-names: Should contain only one value - "default" -- pinctrl-0: Should specify pin control groups used for this controller. - -Example: - - sound:sound { - compatible = "mediatek,mt2701-wm8960-machine"; - mediatek,platform = <&afe>; - audio-routing = - "Headphone", "HP_L", - "Headphone", "HP_R", - "LINPUT1", "AMIC", - "RINPUT1", "AMIC"; - mediatek,audio-codec = <&wm8960>; - pinctrl-names = "default"; - pinctrl-0 = <&aud_pins_default>; - }; diff --git a/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml b/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml index 9853c11a13..cbc641ecbe 100644 --- a/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml +++ b/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml @@ -12,17 +12,46 @@ maintainers: description: This binding describes the MT8186 sound card. +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: - mediatek,mt8186-mt6366-da7219-max98357-sound + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. + Valid names could be the input or output widgets of audio components, + power supplies, MicBias of codec and the software switch. + minItems: 2 + items: + enum: + # Sinks + - HDMI1 + - Headphones + - Line Out + - MIC + - Speakers + + # Sources + - Headset Mic + - HPL + - HPR + - Speaker + - TX + mediatek,platform: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8186 ASoC platform. headset-codec: type: object + deprecated: true additionalProperties: false properties: sound-dai: @@ -32,6 +61,7 @@ properties: playback-codecs: type: object + deprecated: true additionalProperties: false properties: sound-dai: @@ -53,32 +83,115 @@ properties: A list of the desired dai-links in the sound card. Each entry is a name defined in the machine driver. -additionalProperties: false +patternProperties: + ".*-dai-link$": + type: object + additionalProperties: false + description: + Container for dai-link level properties and CODEC sub-nodes. + + properties: + link-name: + description: Indicates dai-link name and PCM stream name + items: + enum: + - I2S0 + - I2S1 + - I2S2 + - I2S3 + + codec: + description: Holds subnode which indicates codec dai. + type: object + additionalProperties: false + properties: + sound-dai: + minItems: 1 + maxItems: 2 + required: + - sound-dai + + dai-format: + description: audio format + items: + enum: + - i2s + - right_j + - left_j + - dsp_a + - dsp_b + + mediatek,clk-provider: + $ref: /schemas/types.yaml#/definitions/string + description: Indicates dai-link clock master. + items: + enum: + - cpu + - codec + + required: + - link-name + +unevaluatedProperties: false required: - compatible - mediatek,platform - - headset-codec - - playback-codecs + +# Disallow legacy properties if xxx-dai-link nodes are specified +if: + not: + patternProperties: + ".*-dai-link$": false +then: + properties: + headset-codec: false + speaker-codecs: false examples: - | sound: mt8186-sound { compatible = "mediatek,mt8186-mt6366-da7219-max98357-sound"; - mediatek,platform = <&afe>; + model = "mt8186_da7219_m98357"; pinctrl-names = "aud_clk_mosi_off", "aud_clk_mosi_on"; pinctrl-0 = <&aud_clk_mosi_off>; pinctrl-1 = <&aud_clk_mosi_on>; + mediatek,platform = <&afe>; + + audio-routing = + "Headphones", "HPL", + "Headphones", "HPR", + "MIC", "Headset Mic", + "Speakers", "Speaker", + "HDMI1", "TX"; + + hs-playback-dai-link { + link-name = "I2S0"; + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&da7219>; + }; + }; - headset-codec { - sound-dai = <&da7219>; + hs-capture-dai-link { + link-name = "I2S1"; + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&da7219>; + }; }; - playback-codecs { - sound-dai = <&anx_bridge_dp>, - <&max98357a>; + spk-dp-playback-dai-link { + link-name = "I2S3"; + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&anx_bridge_dp>, <&max98357a>; + }; }; }; diff --git a/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml index bdf7b09605..ed93f18ef9 100644 --- a/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml +++ b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml @@ -12,6 +12,9 @@ maintainers: description: This binding describes the MT8186 sound card. +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: @@ -19,6 +22,34 @@ properties: - mediatek,mt8186-mt6366-rt5682s-max98360-sound - mediatek,mt8186-mt6366-rt5650-sound + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. + Valid names could be the input or output widgets of audio components, + power supplies, MicBias of codec and the software switch. + minItems: 2 + items: + enum: + # Sinks + - HDMI1 + - Headphone + - IN1P + - IN1N + - Line Out + - Speakers + + # Sources + - Headset Mic + - HPOL + - HPOR + - Speaker + - SPOL + - SPOR + - TX + mediatek,platform: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8186 ASoC platform. @@ -32,6 +63,7 @@ properties: headset-codec: type: object + deprecated: true additionalProperties: false properties: sound-dai: @@ -41,6 +73,7 @@ properties: playback-codecs: type: object + deprecated: true additionalProperties: false properties: sound-dai: @@ -62,13 +95,56 @@ properties: A list of the desired dai-links in the sound card. Each entry is a name defined in the machine driver. -additionalProperties: false +patternProperties: + ".*-dai-link$": + type: object + additionalProperties: false + description: + Container for dai-link level properties and CODEC sub-nodes. + + properties: + link-name: + description: Indicates dai-link name and PCM stream name + enum: [ I2S0, I2S1, I2S2, I2S3 ] + + codec: + description: Holds subnode which indicates codec dai. + type: object + additionalProperties: false + properties: + sound-dai: + minItems: 1 + maxItems: 2 + required: + - sound-dai + + dai-format: + description: audio format + enum: [ i2s, right_j, left_j, dsp_a, dsp_b ] + + mediatek,clk-provider: + $ref: /schemas/types.yaml#/definitions/string + description: Indicates dai-link clock master. + enum: [ cpu, codec ] + + required: + - link-name + +unevaluatedProperties: false required: - compatible - mediatek,platform - - headset-codec - - playback-codecs + +# Disallow legacy properties if xxx-dai-link nodes are specified +if: + not: + patternProperties: + ".*-dai-link$": false +then: + properties: + headset-codec: false + speaker-codecs: false examples: - | @@ -76,23 +152,49 @@ examples: sound: mt8186-sound { compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound"; - mediatek,platform = <&afe>; + model = "mt8186_rt1019_rt5682s"; pinctrl-names = "aud_clk_mosi_off", "aud_clk_mosi_on", "aud_gpio_dmic_sec"; pinctrl-0 = <&aud_clk_mosi_off>; pinctrl-1 = <&aud_clk_mosi_on>; pinctrl-2 = <&aud_gpio_dmic_sec>; + mediatek,platform = <&afe>; dmic-gpios = <&pio 23 GPIO_ACTIVE_HIGH>; - headset-codec { - sound-dai = <&rt5682s>; + audio-routing = + "Headphone", "HPOL", + "Headphone", "HPOR", + "IN1P", "Headset Mic", + "Speakers", "Speaker", + "HDMI1", "TX"; + + hs-playback-dai-link { + link-name = "I2S0"; + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&rt5682s 0>; + }; + }; + + hs-capture-dai-link { + link-name = "I2S1"; + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&rt5682s 0>; + }; }; - playback-codecs { - sound-dai = <&it6505dptx>, - <&rt1019p>; + spk-hdmi-playback-dai-link { + link-name = "I2S3"; + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&it6505dptx>, <&rt1019p>; + }; }; }; diff --git a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml index 7e50f5d65c..c4e68f31aa 100644 --- a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml +++ b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml @@ -13,6 +13,9 @@ maintainers: description: This binding describes the MT8192 sound card. +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: @@ -20,6 +23,31 @@ properties: - mediatek,mt8192_mt6359_rt1015p_rt5682 - mediatek,mt8192_mt6359_rt1015p_rt5682s + audio-routing: + description: + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. + Valid names could be the input or output widgets of audio components, + power supplies, MicBias of codec and the software switch. + minItems: 2 + items: + enum: + # Sinks + - Speakers + - Headphone Jack + - IN1P + - Left Spk + - Right Spk + + # Sources + - Headset Mic + - HPOL + - HPOR + - Left SPO + - Right SPO + - Speaker + mediatek,platform: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8192 ASoC platform. @@ -27,10 +55,12 @@ properties: mediatek,hdmi-codec: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of HDMI codec. + deprecated: true headset-codec: type: object additionalProperties: false + deprecated: true properties: sound-dai: @@ -41,6 +71,7 @@ properties: speaker-codecs: type: object additionalProperties: false + deprecated: true properties: sound-dai: @@ -51,33 +82,121 @@ properties: required: - sound-dai -additionalProperties: false +patternProperties: + ".*-dai-link$": + type: object + additionalProperties: false + + description: + Container for dai-link level properties and CODEC sub-nodes. + + properties: + link-name: + description: Indicates dai-link name and PCM stream name + enum: + - I2S0 + - I2S1 + - I2S2 + - I2S3 + - I2S4 + - I2S5 + - I2S6 + - I2S7 + - I2S8 + - I2S9 + - TDM + + codec: + description: Holds subnode which indicates codec dai. + type: object + additionalProperties: false + properties: + sound-dai: + minItems: 1 + maxItems: 2 + required: + - sound-dai + + dai-format: + description: audio format + enum: [ i2s, right_j, left_j, dsp_a, dsp_b ] + + mediatek,clk-provider: + $ref: /schemas/types.yaml#/definitions/string + description: Indicates dai-link clock master. + enum: [ cpu, codec ] + + required: + - link-name + +unevaluatedProperties: false required: - compatible - mediatek,platform - - headset-codec - - speaker-codecs + +# Disallow legacy properties if xxx-dai-link nodes are specified +if: + not: + patternProperties: + ".*-dai-link$": false +then: + properties: + headset-codec: false + speaker-codecs: false + mediatek,hdmi-codec: false examples: - | sound: mt8192-sound { compatible = "mediatek,mt8192_mt6359_rt1015_rt5682"; - mediatek,platform = <&afe>; - mediatek,hdmi-codec = <&anx_bridge_dp>; + model = "mt8192_mt6359_rt1015_rt5682"; pinctrl-names = "aud_clk_mosi_off", "aud_clk_mosi_on"; pinctrl-0 = <&aud_clk_mosi_off>; pinctrl-1 = <&aud_clk_mosi_on>; + mediatek,platform = <&afe>; + + audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR", + "IN1P", "Headset Mic", + "Speakers", "Speaker"; + + spk-playback-dai-link { + link-name = "I2S3"; + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&rt1015p>; + }; + }; + + hs-playback-dai-link { + link-name = "I2S8"; + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&rt5682 0>; + }; + }; - headset-codec { - sound-dai = <&rt5682>; + hs-capture-dai-link { + link-name = "I2S9"; + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&rt5682 0>; + }; }; - speaker-codecs { - sound-dai = <&rt1015_l>, - <&rt1015_r>; + displayport-dai-link { + link-name = "TDM"; + dai-format = "dsp_a"; + codec { + sound-dai = <&anx_bridge_dp>; + }; }; }; diff --git a/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml b/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml index c1ddbf672c..2af1d8ffbd 100644 --- a/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml +++ b/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml @@ -12,6 +12,9 @@ maintainers: description: This binding describes the MT8195 sound card. +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: @@ -23,6 +26,33 @@ properties: $ref: /schemas/types.yaml#/definitions/string description: User specified audio sound card name + audio-routing: + description: + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. + Valid names could be the input or output widgets of audio components, + power supplies, MicBias of codec and the software switch. + minItems: 2 + items: + enum: + # Sinks + - Ext Spk + - Headphone + - IN1P + - Left Spk + - Right Spk + + # Sources + - Headset Mic + - HPOL + - HPOR + - Left BE_OUT + - Left SPO + - Right BE_OUT + - Right SPO + - Speaker + mediatek,platform: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8195 ASoC platform. @@ -30,10 +60,12 @@ properties: mediatek,dptx-codec: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8195 Display Port Tx codec node. + deprecated: true mediatek,hdmi-codec: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8195 HDMI codec node. + deprecated: true mediatek,adsp: $ref: /schemas/types.yaml#/definitions/phandle @@ -45,20 +77,122 @@ properties: A list of the desired dai-links in the sound card. Each entry is a name defined in the machine driver. +patternProperties: + ".*-dai-link$": + type: object + additionalProperties: false + description: + Container for dai-link level properties and CODEC sub-nodes. + + properties: + link-name: + description: Indicates dai-link name and PCM stream name + enum: + - DPTX_BE + - ETDM1_IN_BE + - ETDM2_IN_BE + - ETDM1_OUT_BE + - ETDM2_OUT_BE + - ETDM3_OUT_BE + - PCM1_BE + + codec: + description: Holds subnode which indicates codec dai. + type: object + additionalProperties: false + properties: + sound-dai: + minItems: 1 + maxItems: 2 + required: + - sound-dai + + dai-format: + description: audio format + enum: [ i2s, right_j, left_j, dsp_a, dsp_b ] + + mediatek,clk-provider: + $ref: /schemas/types.yaml#/definitions/string + description: Indicates dai-link clock master. + enum: [ cpu, codec ] + + required: + - link-name + additionalProperties: false required: - compatible - mediatek,platform +# Disallow legacy properties if xxx-dai-link nodes are specified +if: + not: + patternProperties: + ".*-dai-link$": false +then: + properties: + mediatek,dptx-codec: false + mediatek,hdmi-codec: false + examples: - | sound: mt8195-sound { compatible = "mediatek,mt8195_mt6359_rt1019_rt5682"; + model = "mt8195_r1019_5682"; mediatek,platform = <&afe>; pinctrl-names = "default"; pinctrl-0 = <&aud_pins_default>; + + audio-routing = + "Headphone", "HPOL", + "Headphone", "HPOR", + "IN1P", "Headset Mic", + "Ext Spk", "Speaker"; + + mm-dai-link { + link-name = "ETDM1_IN_BE"; + mediatek,clk-provider = "cpu"; + }; + + hs-playback-dai-link { + link-name = "ETDM1_OUT_BE"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&headset_codec>; + }; + }; + + hs-capture-dai-link { + link-name = "ETDM2_IN_BE"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&headset_codec>; + }; + }; + + spk-playback-dai-link { + link-name = "ETDM2_OUT_BE"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&spk_amplifier>; + }; + }; + + hdmi-dai-link { + link-name = "ETDM3_OUT_BE"; + codec { + sound-dai = <&hdmi_tx>; + }; + }; + + displayport-dai-link { + link-name = "DPTX_BE"; + codec { + sound-dai = <&dp_tx>; + }; + }; }; ... diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file mode 100644 index 0000000000..979be0d336 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8325.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU8325 audio Amplifier + +maintainers: + - Seven Lee + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: nuvoton,nau8325 + + reg: + maxItems: 1 + + nuvoton,vref-impedance-ohms: + description: + The vref impedance to be used in ohms. Middle of voltage enables + Tie-Off selection options. Due to the high impedance of the VREF + pin, it is important to use a low-leakage capacitor. + + enum: [0, 25000, 125000, 2500] + + nuvoton,dac-vref-microvolt: + description: + The DAC vref to be used in voltage. DAC reference voltage setting. Can + be used for minor tuning of the output level. Since the VDDA is range + between 1.62 to 1.98 voltage, the typical value for design is 1.8V. After + the minor tuning, the final microvolt are as the below. + + enum: [1800000, 2700000, 2880000, 3060000] + + nuvoton,alc-enable: + description: + Enable digital automatic level control (ALC) function. + type: boolean + + nuvoton,clock-detection-disable: + description: + When clock detection is enabled, it will detect whether MCLK + and FS are within the range. MCLK range is from 2.048MHz to 24.576MHz. + FS range is from 8kHz to 96kHz. And also needs to detect the ratio + MCLK_SRC/LRCK of 256, 400 or 500, and needs to detect the BCLK + to make sure data is present. There needs to be at least 8 BCLK + cycles per Frame Sync. + type: boolean + + nuvoton,clock-det-data: + description: + Request clock detection to require 2048 non-zero samples before enabling + the audio paths. If set then non-zero samples is required, otherwise it + doesn't matter. + type: boolean + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@21 { + compatible = "nuvoton,nau8325"; + reg = <0x21>; + nuvoton,vref-impedance-ohms = <125000>; + nuvoton,dac-vref-microvolt = <2880000>; + nuvoton,alc-enable; + nuvoton,clock-det-data; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml index 054b53954a..9f44168efb 100644 --- a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml @@ -103,6 +103,12 @@ properties: just limited to the left adc for design demand. type: boolean + nuvoton,adc-delay-ms: + description: Delay (in ms) to make input path stable and avoid pop noise. + minimum: 125 + maximum: 500 + default: 125 + '#sound-dai-cells': const: 0 @@ -136,6 +142,7 @@ examples: nuvoton,jack-eject-debounce = <0>; nuvoton,dmic-clk-threshold = <3072000>; nuvoton,dmic-slew-rate = <0>; + nuvoton,adc-delay-ms = <125>; #sound-dai-cells = <0>; }; }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt deleted file mode 100644 index eaf00102d9..0000000000 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt +++ /dev/null @@ -1,36 +0,0 @@ -NVIDIA Tegra 20 AC97 controller - -Required properties: -- compatible : "nvidia,tegra20-ac97" -- reg : Should contain AC97 controller registers location and length -- interrupts : Should contain AC97 interrupt -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - ac97 -- dmas : Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number - of the GPIO used to reset the external AC97 codec -- nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number - of the GPIO corresponding with the AC97 DAP _FS line - -Example: - -ac97@70002000 { - compatible = "nvidia,tegra20-ac97"; - reg = <0x70002000 0x200>; - interrupts = <0 81 0x04>; - nvidia,codec-reset-gpio = <&gpio 170 0>; - nvidia,codec-sync-gpio = <&gpio 120 0>; - clocks = <&tegra_car 3>; - resets = <&tegra_car 3>; - reset-names = "ac97"; - dmas = <&apbdma 12>, <&apbdma 12>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.yaml new file mode 100644 index 0000000000..4ea0a303d9 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra20-ac97.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20 AC97 controller + +maintainers: + - Thierry Reding + - Jon Hunter + +properties: + compatible: + const: nvidia,tegra20-ac97 + + reg: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: ac97 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + dmas: + maxItems: 2 + + dma-names: + items: + - const: rx + - const: tx + + nvidia,codec-reset-gpios: + description: Reset pin of external AC97 codec + maxItems: 1 + + nvidia,codec-sync-gpios: + description: AC97 DAP _FS line + maxItems: 1 + +required: + - compatible + - reg + - resets + - reset-names + - interrupts + - clocks + - dmas + - dma-names + - nvidia,codec-reset-gpios + - nvidia,codec-sync-gpios + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + #include + + ac97@70002000 { + compatible = "nvidia,tegra20-ac97"; + reg = <0x70002000 0x200>; + resets = <&tegra_car 3>; + reset-names = "ac97"; + interrupts = ; + clocks = <&tegra_car 3>; + dmas = <&apbdma 12>, <&apbdma 12>; + dma-names = "rx", "tx"; + nvidia,codec-reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + nvidia,codec-sync-gpios = <&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + }; +... diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-das.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-das.txt deleted file mode 100644 index 6de3a7ee4e..0000000000 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-das.txt +++ /dev/null @@ -1,12 +0,0 @@ -NVIDIA Tegra 20 DAS (Digital Audio Switch) controller - -Required properties: -- compatible : "nvidia,tegra20-das" -- reg : Should contain DAS registers location and length - -Example: - -das@70000c00 { - compatible = "nvidia,tegra20-das"; - reg = <0x70000c00 0x80>; -}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-das.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra20-das.yaml new file mode 100644 index 0000000000..44c5ce8ee6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-das.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra20-das.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra 20 DAS (Digital Audio Switch) controller + +maintainers: + - Thierry Reding + - Jon Hunter + +properties: + compatible: + const: nvidia,tegra20-das + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <1>; + #size-cells = <1>; + das@70000c00 { + compatible = "nvidia,tegra20-das"; + reg = <0x70000c00 0x80>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt deleted file mode 100644 index 38caa936f6..0000000000 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt +++ /dev/null @@ -1,27 +0,0 @@ -NVIDIA Tegra30 I2S controller - -Required properties: -- compatible : For Tegra30, must contain "nvidia,tegra30-i2s". For Tegra124, - must contain "nvidia,tegra124-i2s". Otherwise, must contain - "nvidia,-i2s" plus at least one of the above, where is - tegra114 or tegra132. -- reg : Should contain I2S registers location and length -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - i2s -- nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback) - first, tx (capture) second. See nvidia,tegra30-ahub.txt for values. - -Example: - -i2s@70080300 { - compatible = "nvidia,tegra30-i2s"; - reg = <0x70080300 0x100>; - nvidia,ahub-cif-ids = <4 4>; - clocks = <&tegra_car 11>; - resets = <&tegra_car 11>; - reset-names = "i2s"; -}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.yaml new file mode 100644 index 0000000000..89c3c6414a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra30-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra30 I2S controller + +maintainers: + - Thierry Reding + - Jon Hunter + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra124-i2s + - nvidia,tegra30-i2s + - items: + - const: nvidia,tegra114-i2s + - const: nvidia,tegra30-i2s + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: i2s + + resets: + maxItems: 1 + + reset-names: + const: i2s + + nvidia,ahub-cif-ids: + description: list of AHUB CIF IDs + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: rx (playback) + - description: tx (capture) + +required: + - compatible + - reg + - clocks + - resets + - reset-names + - nvidia,ahub-cif-ids + +additionalProperties: false + +examples: + - | + #include + + i2s@70080300 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080300 0x100>; + nvidia,ahub-cif-ids = <4 4>; + clocks = <&tegra_car TEGRA30_CLK_I2S0>; + resets = <&tegra_car 30>; + reset-names = "i2s"; + }; +... diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index 2ab6871e89..b2e15ebbd1 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -29,6 +29,8 @@ properties: - enum: - qcom,apq8016-sbc-sndcard - qcom,msm8916-qdsp6-sndcard + - qcom,qcm6490-idp-sndcard + - qcom,qcs6490-rb3gen2-sndcard - qcom,qrb5165-rb5-sndcard - qcom,sc7180-qdsp6-sndcard - qcom,sc8280xp-sndcard diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index 0d7a6b576d..07ec6247d9 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -48,13 +48,16 @@ properties: - const: renesas,rcar_sound-gen3 # for Gen4 SoC - items: - - const: renesas,rcar_sound-r8a779g0 # R-Car V4H + - enum: + - renesas,rcar_sound-r8a779g0 # R-Car V4H + - renesas,rcar_sound-r8a779h0 # R-Car V4M - const: renesas,rcar_sound-gen4 # for Generic - enum: - renesas,rcar_sound-gen1 - renesas,rcar_sound-gen2 - renesas,rcar_sound-gen3 + - renesas,rcar_sound-gen4 reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3308-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3308-codec.yaml new file mode 100644 index 0000000000..ecf3d7d968 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3308-codec.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/rockchip,rk3308-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3308 Internal Codec + +description: | + This is the audio codec embedded in the Rockchip RK3308 + SoC. It has 8 24-bit ADCs and 2 24-bit DACs. The maximum supported + sampling rate is 192 kHz. + + It is connected internally to one out of a selection of the internal I2S + controllers. + + The RK3308 audio codec has 8 independent capture channels, but some + features work on stereo pairs called groups: + * grp 0 -- MIC1 / MIC2 + * grp 1 -- MIC3 / MIC4 + * grp 2 -- MIC5 / MIC6 + * grp 3 -- MIC7 / MIC8 + +maintainers: + - Luca Ceresoli + +properties: + compatible: + const: rockchip,rk3308-codec + + reg: + maxItems: 1 + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the General Register Files (GRF) + + clocks: + items: + - description: clock for TX + - description: clock for RX + - description: AHB clock driving the interface + + clock-names: + items: + - const: mclk_tx + - const: mclk_rx + - const: hclk + + resets: + maxItems: 1 + + reset-names: + items: + - const: codec + + "#sound-dai-cells": + const: 0 + + rockchip,micbias-avdd-percent: + description: | + Voltage setting for the MICBIAS pins expressed as a percentage of + AVDD. + + E.g. if rockchip,micbias-avdd-percent = 85 and AVDD = 3v3, then the + MIC BIAS voltage will be 3.3 V * 85% = 2.805 V. + + enum: [ 50, 55, 60, 65, 70, 75, 80, 85 ] + +required: + - compatible + - reg + - rockchip,grf + - clocks + - resets + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + #include + + audio_codec: audio-codec@ff560000 { + compatible = "rockchip,rk3308-codec"; + reg = <0xff560000 0x10000>; + rockchip,grf = <&grf>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + clocks = <&cru SCLK_I2S2_8CH_TX_OUT>, + <&cru SCLK_I2S2_8CH_RX_OUT>, + <&cru PCLK_ACODEC>; + reset-names = "codec"; + resets = <&cru SRST_ACODEC_P>; + #sound-dai-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml index b9111d375b..8978f6bd63 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml @@ -65,6 +65,10 @@ properties: $ref: audio-graph-port.yaml# unevaluatedProperties: false + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - "#sound-dai-cells" diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index 59df8a8323..68f97b4625 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -48,6 +48,10 @@ properties: clock-names: maxItems: 3 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg @@ -68,7 +72,7 @@ patternProperties: properties: compatible: description: Compatible for SAI sub-block A or B. - pattern: "st,stm32-sai-sub-[ab]" + pattern: "^st,stm32-sai-sub-[ab]$" "#sound-dai-cells": const: 0 diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml index bc48151b9a..3dedc81ec1 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml @@ -50,6 +50,10 @@ properties: resets: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - "#sound-dai-cells" diff --git a/Documentation/devicetree/bindings/sound/ti,pcm1681.txt b/Documentation/devicetree/bindings/sound/ti,pcm1681.txt deleted file mode 100644 index 4df17185ab..0000000000 --- a/Documentation/devicetree/bindings/sound/ti,pcm1681.txt +++ /dev/null @@ -1,15 +0,0 @@ -Texas Instruments PCM1681 8-channel PWM Processor - -Required properties: - - - compatible: Should contain "ti,pcm1681". - - reg: The i2c address. Should contain <0x4c>. - -Examples: - - i2c_bus { - pcm1681@4c { - compatible = "ti,pcm1681"; - reg = <0x4c>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/ti,pcm1681.yaml b/Documentation/devicetree/bindings/sound/ti,pcm1681.yaml new file mode 100644 index 0000000000..5aa0061729 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,pcm1681.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,pcm1681.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments PCM1681 8-channel PWM Processor + +maintainers: + - Shenghao Ding + - Kevin Lu + - Baojun Xu + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: ti,pcm1681 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pcm1681: audio-codec@4c { + compatible = "ti,pcm1681"; + reg = <0x4c>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml b/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml new file mode 100644 index 0000000000..dd5b08e3d7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 - 2024 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,pcm6240.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments PCM6240 Family Audio ADC/DAC + +maintainers: + - Shenghao Ding + +description: | + The PCM6240 Family is a big family of Audio ADC/DAC for + different Specifications, range from Personal Electric + to Automotive Electric, even some professional fields. + + Specifications about the audio chip can be found at: + https://www.ti.com/lit/gpn/tlv320adc3120 + https://www.ti.com/lit/gpn/tlv320adc5120 + https://www.ti.com/lit/gpn/tlv320adc6120 + https://www.ti.com/lit/gpn/dix4192 + https://www.ti.com/lit/gpn/pcm1690 + https://www.ti.com/lit/gpn/pcm3120-q1 + https://www.ti.com/lit/gpn/pcm3140-q1 + https://www.ti.com/lit/gpn/pcm5120-q1 + https://www.ti.com/lit/gpn/pcm6120-q1 + https://www.ti.com/lit/gpn/pcm6260-q1 + https://www.ti.com/lit/gpn/pcm9211 + https://www.ti.com/lit/gpn/pcmd3140 + https://www.ti.com/lit/gpn/pcmd3180 + https://www.ti.com/lit/gpn/taa5212 + https://www.ti.com/lit/gpn/tad5212 + +properties: + compatible: + description: | + ti,adc3120: Stereo-channel, 768-kHz, Burr-Brown™ audio analog-to- + digital converter (ADC) with 106-dB SNR. + + ti,adc5120: 2-Channel, 768-kHz, Burr-Brown™ Audio ADC with 120-dB SNR. + + ti,adc6120: Stereo-channel, 768-kHz, Burr-Brown™ audio analog-to- + digital converter (ADC) with 123-dB SNR. + + ti,dix4192: 216-kHz digital audio converter with Quad-Channel In + and One-Channel Out. + + ti,pcm1690: Automotive Catalog 113dB SNR 8-Channel Audio DAC with + Differential Outputs. + + ti,pcm3120: Automotive, stereo, 106-dB SNR, 768-kHz, low-power + software-controlled audio ADC. + + ti,pcm3140: Automotive, Quad-Channel, 768-kHz, Burr-Brown™ Audio ADC + with 106-dB SNR. + + ti,pcm5120: Automotive, stereo, 120-dB SNR, 768-kHz, low-power + software-controlled audio ADC. + + ti,pcm5140: Automotive, Quad-Channel, 768-kHz, Burr-Brown™ Audio ADC + with 120-dB SNR. + + ti,pcm6120: Automotive, stereo, 123-dB SNR, 768-kHz, low-power + software-controlled audio ADC. + + ti,pcm6140: Automotive, Quad-Channel, 768-kHz, Burr-Brown™ Audio ADC + with 123-dB SNR. + + ti,pcm6240: Automotive 4-ch audio ADC with integrated programmable mic + bias, boost and input diagnostics. + + ti,pcm6260: Automotive 6-ch audio ADC with integrated programmable mic + bias, boost and input diagnostics. + + ti,pcm9211: 216-kHz digital audio converter With Stereo ADC and + Routing. + + ti,pcmd3140: Four-channel PDM-input to TDM or I2S output converter. + + ti,pcmd3180: Eight-channel pulse-density-modulation input to TDM or + I2S output converter. + + ti,taa5212: Low-power high-performance stereo audio ADC with 118-dB + dynamic range. + + ti,tad5212: Low-power stereo audio DAC with 120-dB dynamic range. + oneOf: + - items: + - enum: + - ti,adc3120 + - ti,adc5120 + - ti,pcm3120 + - ti,pcm5120 + - ti,pcm6120 + - const: ti,adc6120 + - items: + - enum: + - ti,pcmd512x + - ti,pcm9211 + - ti,taa5212 + - ti,tad5212 + - const: ti,adc6120 + - items: + - enum: + - ti,pcm3140 + - ti,pcm5140 + - ti,dix4192 + - ti,pcm6140 + - ti,pcm6260 + - const: ti,pcm6240 + - items: + - enum: + - ti,pcmd3140 + - ti,pcmd3180 + - ti,pcm1690 + - ti,taa5412 + - ti,tad5412 + - const: ti,pcm6240 + - enum: + - ti,adc6120 + - ti,pcm6240 + + reg: + description: + I2C address, in multiple pcmdevices case, all the i2c address + aggregate as one Audio Device to support multiple audio slots. + minItems: 1 + maxItems: 4 + + reset-gpios: + maxItems: 1 + + interrupts: + maxItems: 1 + description: + Invalid only for ti,pcm1690 because of no INT pin. + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - ti,pcm1690 + then: + properties: + interrupts: false + +additionalProperties: false + +examples: + - | + #include + i2c { + /* example for two devices with interrupt support */ + #address-cells = <1>; + #size-cells = <0>; + pcm6240: audio-codec@48 { + compatible = "ti,pcm6240"; + reg = <0x48>, /* primary-device */ + <0x4b>; /* secondary-device */ + #sound-dai-cells = <0>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio1>; + interrupts = <15>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8776.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8776.yaml new file mode 100644 index 0000000000..7bbc96ee81 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8776.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8776.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: WM8776 audio CODEC + +maintainers: + - patches@opensource.cirrus.com + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: wlf,wm8776 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + compatible = "wlf,wm8776"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8974.txt b/Documentation/devicetree/bindings/sound/wlf,wm8974.txt deleted file mode 100644 index 01d3a7c834..0000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8974.txt +++ /dev/null @@ -1,15 +0,0 @@ -WM8974 audio CODEC - -This device supports both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - compatible: "wlf,wm8974" - - reg: the I2C address or SPI chip select number of the device - -Examples: - -codec: wm8974@1a { - compatible = "wlf,wm8974"; - reg = <0x1a>; -}; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8974.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8974.yaml new file mode 100644 index 0000000000..d27300207c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8974.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8974.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: WM8974 audio CODEC + +maintainers: + - patches@opensource.cirrus.com + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: wlf,wm8974 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + compatible = "wlf,wm8974"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8776.txt b/Documentation/devicetree/bindings/sound/wm8776.txt deleted file mode 100644 index 01173369c3..0000000000 --- a/Documentation/devicetree/bindings/sound/wm8776.txt +++ /dev/null @@ -1,18 +0,0 @@ -WM8776 audio CODEC - -This device supports both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - - compatible : "wlf,wm8776" - - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - -Example: - -wm8776: codec@1a { - compatible = "wlf,wm8776"; - reg = <0x1a>; -}; diff --git a/Documentation/devicetree/bindings/sound/xmos,xvf3500.yaml b/Documentation/devicetree/bindings/sound/xmos,xvf3500.yaml new file mode 100644 index 0000000000..fb77a61f13 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/xmos,xvf3500.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/xmos,xvf3500.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: XMOS XVF3500 VocalFusion Voice Processor + +maintainers: + - Javier Carrasco + +description: + The XMOS XVF3500 VocalFusion Voice Processor is a low-latency, 32-bit + multicore controller for voice processing. + https://www.xmos.com/xvf3500/ + +allOf: + - $ref: /schemas/usb/usb-device.yaml# + +properties: + compatible: + const: usb20b1,0013 + + reg: true + + reset-gpios: + maxItems: 1 + + vdd-supply: + description: + Regulator for the 1V0 supply. + + vddio-supply: + description: + Regulator for the 3V3 supply. + +required: + - compatible + - reg + - reset-gpios + - vdd-supply + - vddio-supply + +additionalProperties: false + +examples: + - | + #include + + usb { + #address-cells = <1>; + #size-cells = <0>; + + voice_processor: voice-processor@1 { + compatible = "usb20b1,0013"; + reg = <1>; + reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc1v0>; + vddio-supply = <&vcc3v3>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/spi/airoha,en7581-snand.yaml b/Documentation/devicetree/bindings/spi/airoha,en7581-snand.yaml new file mode 100644 index 0000000000..b820c5613d --- /dev/null +++ b/Documentation/devicetree/bindings/spi/airoha,en7581-snand.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/airoha,en7581-snand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SPI-NAND flash controller for Airoha ARM SoCs + +maintainers: + - Lorenzo Bianconi + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: airoha,en7581-snand + + reg: + items: + - description: spi base address + - description: nfi2spi base address + + clocks: + maxItems: 1 + + clock-names: + items: + - const: spi + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + spi@1fa10000 { + compatible = "airoha,en7581-snand"; + reg = <0x0 0x1fa10000 0x0 0x140>, + <0x0 0x1fa11000 0x0 0x160>; + + clocks = <&scuclk EN7523_CLK_SPI>; + clock-names = "spi"; + + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml index cca81f89e2..d48ecd6cd5 100644 --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml @@ -68,12 +68,13 @@ properties: - items: - enum: - amd,pensando-elba-qspi - - ti,k2g-qspi - - ti,am654-ospi - intel,lgm-qspi - - xlnx,versal-ospi-1.0 - intel,socfpga-qspi + - mobileye,eyeq5-ospi - starfive,jh7110-qspi + - ti,am654-ospi + - ti,k2g-qspi + - xlnx,versal-ospi-1.0 - const: cdns,qspi-nor - const: cdns,qspi-nor @@ -145,7 +146,6 @@ required: - reg - interrupts - clocks - - cdns,fifo-depth - cdns,fifo-width - cdns,trigger-address - '#address-cells' diff --git a/Documentation/devicetree/bindings/spi/marvell,armada-3700-spi.yaml b/Documentation/devicetree/bindings/spi/marvell,armada-3700-spi.yaml new file mode 100644 index 0000000000..61caa1d861 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/marvell,armada-3700-spi.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/marvell,armada-3700-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 3700 SPI Controller + +description: + The SPI controller on Marvell Armada 3700 SoC. + +maintainers: + - Kousik Sanagavarapu + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: marvell,armada-3700-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + num-cs: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include + + spi0: spi@10600 { + compatible = "marvell,armada-3700-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10600 0x5d>; + clocks = <&nb_perih_clk 7>; + interrupts = ; + num-cs = <4>; + }; +... diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml index 00acbbb0f6..49649fc3f9 100644 --- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml @@ -54,6 +54,7 @@ properties: - renesas,msiof-r8a779a0 # R-Car V3U - renesas,msiof-r8a779f0 # R-Car S4-8 - renesas,msiof-r8a779g0 # R-Car V4H + - renesas,msiof-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-msiof # generic R-Car Gen4 # compatible device - items: diff --git a/Documentation/devicetree/bindings/spi/spi-armada-3700.txt b/Documentation/devicetree/bindings/spi/spi-armada-3700.txt deleted file mode 100644 index 1564aa8c02..0000000000 --- a/Documentation/devicetree/bindings/spi/spi-armada-3700.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Marvell Armada 3700 SPI Controller - -Required Properties: - -- compatible: should be "marvell,armada-3700-spi" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: The interrupt number. The interrupt specifier format depends on - the interrupt controller and of its driver. -- clocks: Must contain the clock source, usually from the North Bridge clocks. -- num-cs: The number of chip selects that is supported by this SPI Controller -- #address-cells: should be 1. -- #size-cells: should be 0. - -Example: - - spi0: spi@10600 { - compatible = "marvell,armada-3700-spi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10600 0x5d>; - clocks = <&nb_perih_clk 7>; - interrupts = ; - num-cs = <4>; - }; diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml index 8bba965a9a..3f1a27efff 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml @@ -46,6 +46,10 @@ properties: - const: tx - const: rx + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml index 4bd9aeb812..a55c8633c3 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml @@ -52,6 +52,10 @@ properties: - const: rx - const: tx + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/ti,qspi.yaml b/Documentation/devicetree/bindings/spi/ti,qspi.yaml new file mode 100644 index 0000000000..626a915b3d --- /dev/null +++ b/Documentation/devicetree/bindings/spi/ti,qspi.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/ti,qspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI QSPI controller + +maintainers: + - Kousik Sanagavarapu + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + enum: + - ti,am4372-qspi + - ti,dra7xxx-qspi + + reg: + items: + - description: base registers + - description: mapped memory + + reg-names: + items: + - const: qspi_base + - const: qspi_mmap + + clocks: + maxItems: 1 + + clock-names: + items: + - const: fck + + interrupts: + maxItems: 1 + + num-cs: + minimum: 1 + maximum: 4 + default: 1 + + ti,hwmods: + description: + Name of the hwmod associated to the QSPI. This is for legacy + platforms only. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + + syscon-chipselects: + description: + Handle to system control region containing QSPI chipselect register + and offset of that register. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to system control register + - description: register offset + + spi-max-frequency: + description: Maximum SPI clocking speed of the controller in Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include + #include + + spi@4b300000 { + compatible = "ti,dra7xxx-qspi"; + reg = <0x4b300000 0x100>, + <0x5c000000 0x4000000>; + reg-names = "qspi_base", "qspi_mmap"; + syscon-chipselects = <&scm_conf 0x558>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>; + clock-names = "fck"; + num-cs = <4>; + spi-max-frequency = <48000000>; + interrupts = ; + }; +... diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Documentation/devicetree/bindings/spi/ti_qspi.txt deleted file mode 100644 index 47b184bce4..0000000000 --- a/Documentation/devicetree/bindings/spi/ti_qspi.txt +++ /dev/null @@ -1,53 +0,0 @@ -TI QSPI controller. - -Required properties: -- compatible : should be "ti,dra7xxx-qspi" or "ti,am4372-qspi". -- reg: Should contain QSPI registers location and length. -- reg-names: Should contain the resource reg names. - - qspi_base: Qspi configuration register Address space - - qspi_mmap: Memory mapped Address space - - (optional) qspi_ctrlmod: Control module Address space -- interrupts: should contain the qspi interrupt number. -- #address-cells, #size-cells : Must be present if the device has sub-nodes -- ti,hwmods: Name of the hwmod associated to the QSPI - -Recommended properties: -- spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Optional properties: -- syscon-chipselects: Handle to system control region contains QSPI - chipselect register and offset of that register. - -NOTE: TI QSPI controller requires different pinmux and IODelay -parameters for Mode-0 and Mode-3 operations, which needs to be set up by -the bootloader (U-Boot). Default configuration only supports Mode-0 -operation. Hence, "spi-cpol" and "spi-cpha" DT properties cannot be -specified in the slave nodes of TI QSPI controller without appropriate -modification to bootloader. - -Example: - -For am4372: -qspi: qspi@47900000 { - compatible = "ti,am4372-qspi"; - reg = <0x47900000 0x100>, <0x30000000 0x4000000>; - reg-names = "qspi_base", "qspi_mmap"; - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <25000000>; - ti,hwmods = "qspi"; -}; - -For dra7xx: -qspi: qspi@4b300000 { - compatible = "ti,dra7xxx-qspi"; - reg = <0x4b300000 0x100>, - <0x5c000000 0x4000000>, - reg-names = "qspi_base", "qspi_mmap"; - syscon-chipselects = <&scm_conf 0x558>; - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <48000000>; - ti,hwmods = "qspi"; -}; diff --git a/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml index f882903769..3ccf35de37 100644 --- a/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml +++ b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml @@ -14,7 +14,7 @@ description: | It is a MIPI System Power Management (SPMI) controller. The PMIC part is provided by - ./Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml. + Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml. allOf: - $ref: spmi.yaml# @@ -48,26 +48,23 @@ patternProperties: PMIC properties, which are specific to the used SPMI PMIC device(s). When used in combination with HiSilicon 6421v600, the properties are documented at - drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml. + Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml unevaluatedProperties: false examples: - | - bus { - #address-cells = <2>; - #size-cells = <2>; + #include - spmi: spmi@fff24000 { + spmi@fff24000 { compatible = "hisilicon,kirin970-spmi-controller"; + reg = <0xfff24000 0x1000>; #address-cells = <2>; #size-cells = <0>; - reg = <0x0 0xfff24000 0x0 0x1000>; hisilicon,spmi-channel = <2>; pmic@0 { - reg = <0 0>; - /* pmic properties */ + reg = <0 SPMI_USID>; + /* pmic properties */ }; - }; }; diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml index f983b4af6d..51daf1b847 100644 --- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml @@ -92,6 +92,7 @@ properties: description: > SPMI bus instance. only applicable to PMIC arbiter version 7 and beyond. Supported values, 0 = primary bus, 1 = secondary bus + deprecated: true required: - compatible diff --git a/Documentation/devicetree/bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml new file mode 100644 index 0000000000..a28b70fb33 --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/qcom,x1e80100-spmi-pmic-arb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm X1E80100 SPMI Controller (PMIC Arbiter v7) + +maintainers: + - Stephen Boyd + +description: | + The X1E80100 SPMI PMIC Arbiter implements HW version 7 and it's an SPMI + controller with wrapping arbitration logic to allow for multiple on-chip + devices to control up to 2 SPMI separate buses. + + The PMIC Arbiter can also act as an interrupt controller, providing interrupts + to slave devices. + +properties: + compatible: + const: qcom,x1e80100-spmi-pmic-arb + + reg: + items: + - description: core registers + - description: tx-channel per virtual slave registers + - description: rx-channel (called observer) per virtual slave registers + + reg-names: + items: + - const: core + - const: chnls + - const: obsrvr + + ranges: true + + '#address-cells': + const: 2 + + '#size-cells': + const: 2 + + qcom,ee: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + indicates the active Execution Environment identifier + + qcom,channel: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + which of the PMIC Arb provided channels to use for accesses + +patternProperties: + "^spmi@[a-f0-9]+$": + type: object + $ref: /schemas/spmi/spmi.yaml + unevaluatedProperties: false + + properties: + reg: + items: + - description: configuration registers + - description: interrupt controller registers + + reg-names: + items: + - const: cnfg + - const: intr + + interrupts: + maxItems: 1 + + interrupt-names: + const: periph_irq + + interrupt-controller: true + + '#interrupt-cells': + const: 4 + description: | + cell 1: slave ID for the requested interrupt (0-15) + cell 2: peripheral ID for requested interrupt (0-255) + cell 3: the requested peripheral interrupt (0-7) + cell 4: interrupt flags indicating level-sense information, + as defined in dt-bindings/interrupt-controller/irq.h + +required: + - compatible + - reg-names + - qcom,ee + - qcom,channel + +additionalProperties: false + +examples: + - | + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + spmi: arbiter@c400000 { + compatible = "qcom,x1e80100-spmi-pmic-arb"; + reg = <0 0x0c400000 0 0x3000>, + <0 0x0c500000 0 0x4000000>, + <0 0x0c440000 0 0x80000>; + reg-names = "core", "chnls", "obsrvr"; + + qcom,ee = <0>; + qcom,channel = <0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + spmi_bus0: spmi@c42d000 { + reg = <0 0x0c42d000 0 0x4000>, + <0 0x0c4c0000 0 0x10000>; + reg-names = "cnfg", "intr"; + + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <4>; + + #address-cells = <2>; + #size-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml index 20f8f9b3b9..01fccdfc41 100644 --- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml @@ -13,11 +13,13 @@ description: Binding for Amlogic Thermal properties: compatible: - items: - - enum: - - amlogic,g12a-cpu-thermal - - amlogic,g12a-ddr-thermal - - const: amlogic,g12a-thermal + oneOf: + - items: + - enum: + - amlogic,g12a-cpu-thermal + - amlogic,g12a-ddr-thermal + - const: amlogic,g12a-thermal + - const: amlogic,a1-cpu-thermal reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml index e6665af52e..331cf4e662 100644 --- a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml @@ -19,6 +19,9 @@ properties: compatible: enum: - mediatek,mt7988-lvts-ap + - mediatek,mt8186-lvts + - mediatek,mt8188-lvts-ap + - mediatek,mt8188-lvts-mcu - mediatek,mt8192-lvts-ap - mediatek,mt8192-lvts-mcu - mediatek,mt8195-lvts-ap @@ -60,6 +63,8 @@ allOf: compatible: contains: enum: + - mediatek,mt8188-lvts-ap + - mediatek,mt8188-lvts-mcu - mediatek,mt8192-lvts-ap - mediatek,mt8192-lvts-mcu then: @@ -75,6 +80,7 @@ allOf: compatible: contains: enum: + - mediatek,mt8186-lvts - mediatek,mt8195-lvts-ap - mediatek,mt8195-lvts-mcu then: diff --git a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml index 5ff72ce5c8..1175bb3583 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml @@ -17,10 +17,14 @@ description: properties: compatible: - enum: - - qcom,sc8180x-lmh - - qcom,sdm845-lmh - - qcom,sm8150-lmh + oneOf: + - enum: + - qcom,sc8180x-lmh + - qcom,sdm845-lmh + - qcom,sm8150-lmh + - items: + - const: qcom,qcm2290-lmh + - const: qcom,sm8150-lmh reg: items: diff --git a/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml b/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml new file mode 100644 index 0000000000..9f6fc5c95c --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/st,stih407-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi digital thermal sensor (DTS) + +maintainers: + - Patrice Chotard + - Lee Jones + +allOf: + - $ref: thermal-sensor.yaml + +properties: + compatible: + const: st,stih407-thermal + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: thermal + + interrupts: + description: + For thermal sensors for which no interrupt has been defined, a polling + delay of 1000ms will be used to read the temperature from device. + maxItems: 1 + + '#thermal-sensor-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include + temperature-sensor@91a0000 { + compatible = "st,stih407-thermal"; + reg = <0x91a0000 0x28>; + clock-names = "thermal"; + clocks = <&CLK_SYSIN>; + interrupts = ; + #thermal-sensor-cells = <0>; + }; +... diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt deleted file mode 100644 index a2f939137e..0000000000 --- a/Documentation/devicetree/bindings/thermal/st-thermal.txt +++ /dev/null @@ -1,32 +0,0 @@ -Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs. - -Required parameters: -------------------- - -compatible : Should be "st,stih407-thermal" - -clock-names : Should be "thermal". - See: Documentation/devicetree/bindings/resource-names.txt -clocks : Phandle of the clock used by the thermal sensor. - See: Documentation/devicetree/bindings/clock/clock-bindings.txt - -Optional parameters: -------------------- - -reg : For non-sysconf based sensors, this should be the physical base - address and length of the sensor's registers. -interrupts : Standard way to define interrupt number. - NB: For thermal sensor's for which no interrupt has been - defined, a polling delay of 1000ms will be used to read the - temperature from device. - -Example: - - temp0@91a0000 { - compatible = "st,stih407-thermal"; - reg = <0x91a0000 0x28>; - clock-names = "thermal"; - clocks = <&CLK_SYSIN>; - interrupts = ; - st,passive_cooling_temp = <110>; - }; diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index 68398e7e86..606b80965a 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -49,7 +49,10 @@ properties: to take when the temperature crosses those thresholds. patternProperties: - "^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$": + # Node name is limited in size due to Linux kernel requirements - 19 + # characters in total (see THERMAL_NAME_LENGTH, including terminating NUL + # byte): + "^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$": type: object description: Each thermal zone node contains information about how frequently it diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml index a0be1755ea..5e09c04da3 100644 --- a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml @@ -103,6 +103,7 @@ properties: - renesas,r8a779a0-cmt0 # 32-bit CMT0 on R-Car V3U - renesas,r8a779f0-cmt0 # 32-bit CMT0 on R-Car S4-8 - renesas,r8a779g0-cmt0 # 32-bit CMT0 on R-Car V4H + - renesas,r8a779h0-cmt0 # 32-bit CMT0 on R-Car V4M - const: renesas,rcar-gen4-cmt0 # 32-bit CMT0 on R-Car Gen4 - items: @@ -110,6 +111,7 @@ properties: - renesas,r8a779a0-cmt1 # 48-bit CMT on R-Car V3U - renesas,r8a779f0-cmt1 # 48-bit CMT on R-Car S4-8 - renesas,r8a779g0-cmt1 # 48-bit CMT on R-Car V4H + - renesas,r8a779h0-cmt1 # 48-bit CMT on R-Car V4M - const: renesas,rcar-gen4-cmt1 # 48-bit CMT on R-Car Gen4 reg: diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml index 8b06a68176..e8c6421664 100644 --- a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml @@ -26,6 +26,7 @@ properties: - renesas,r9a07g043-ostm # RZ/G2UL and RZ/Five - renesas,r9a07g044-ostm # RZ/G2{L,LC} - renesas,r9a07g054-ostm # RZ/V2L + - renesas,r9a09g057-ostm # RZ/V2H(P) - const: renesas,ostm # Generic reg: @@ -58,6 +59,7 @@ if: - renesas,r9a07g043-ostm - renesas,r9a07g044-ostm - renesas,r9a07g054-ostm + - renesas,r9a09g057-ostm then: required: - resets diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml index 84bbe15028..360a5cf1ae 100644 --- a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml @@ -39,6 +39,7 @@ properties: - renesas,tmu-r8a779a0 # R-Car V3U - renesas,tmu-r8a779f0 # R-Car S4-8 - renesas,tmu-r8a779g0 # R-Car V4H + - renesas,tmu-r8a779h0 # R-Car V4M - const: renesas,tmu reg: diff --git a/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml b/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml index 50a3fd3124..8b0d3d4be5 100644 --- a/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml +++ b/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml @@ -33,13 +33,13 @@ properties: reg: maxItems: 1 - 'ibm,#dma-address-cells': + ibm,#dma-address-cells: description: number of cells that are used to encode the physical address field of dma-window properties $ref: /schemas/types.yaml#/definitions/uint32-array - 'ibm,#dma-size-cells': + ibm,#dma-size-cells: description: number of cells that are used to encode the size field of dma-window properties diff --git a/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml b/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml index 3ab4434b73..af7720dc4a 100644 --- a/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml +++ b/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml @@ -32,6 +32,7 @@ properties: - enum: - infineon,slb9673 - nuvoton,npct75x + - st,st33ktpm2xi2c - const: tcg,tpm-tis-i2c - description: TPM 1.2 and 2.0 chips with vendor-specific I²C interface diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index e07be7bf83..0a419453d1 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -126,6 +126,8 @@ properties: - ibm,cffps1 # IBM Common Form Factor Power Supply Versions 2 - ibm,cffps2 + # IBM On-Chip Controller hwmon device + - ibm,p8-occ-hwmon # Infineon barometric pressure and temperature sensor - infineon,dps310 # Infineon IR36021 digital POL buck controller @@ -134,6 +136,8 @@ properties: - infineon,irps5401 # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor - infineon,tlv493d-a1b6 + # Infineon Hot-swap controller xdp710 + - infineon,xdp710 # Infineon Multi-phase Digital VR Controller xdpe11280 - infineon,xdpe11280 # Infineon Multi-phase Digital VR Controller xdpe12254 @@ -160,6 +164,8 @@ properties: - isil,isl29030 # Intersil ISL68137 Digital Output Configurable PWM Controller - isil,isl68137 + # Intersil ISL69269 PMBus Voltage Regulator + - isil,isl69269 # Intersil ISL76682 Ambient Light Sensor - isil,isl76682 # Linear Technology LTC2488 diff --git a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml index b2b509b394..720879820f 100644 --- a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml @@ -12,12 +12,10 @@ maintainers: description: | Each Samsung UFS host controller instance should have its own node. -allOf: - - $ref: ufs-common.yaml - properties: compatible: enum: + - google,gs101-ufs - samsung,exynos7-ufs - samsung,exynosautov9-ufs - samsung,exynosautov9-ufs-vh @@ -38,14 +36,24 @@ properties: - const: ufsp clocks: + minItems: 2 items: - description: ufs link core clock - description: unipro main clock + - description: fmp clock + - description: ufs aclk clock + - description: ufs pclk clock + - description: sysreg clock clock-names: + minItems: 2 items: - const: core_clk - const: sclk_unipro_main + - const: fmp + - const: aclk + - const: pclk + - const: sysreg phys: maxItems: 1 @@ -72,6 +80,30 @@ required: - clocks - clock-names +allOf: + - $ref: ufs-common.yaml + - if: + properties: + compatible: + contains: + const: google,gs101-ufs + + then: + properties: + clocks: + minItems: 6 + + clock-names: + minItems: 6 + + else: + properties: + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/chipidea,usb2-common.yaml b/Documentation/devicetree/bindings/usb/chipidea,usb2-common.yaml new file mode 100644 index 0000000000..d2a7d2ecf4 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/chipidea,usb2-common.yaml @@ -0,0 +1,200 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/chipidea,usb2-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB2 ChipIdea USB controller Common Properties + +maintainers: + - Xu Yang + +properties: + reg: + minItems: 1 + maxItems: 2 + + interrupts: + minItems: 1 + maxItems: 2 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + dr_mode: true + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + maxItems: 1 + + "#reset-cells": + const: 1 + + phy_type: true + + itc-setting: + description: + interrupt threshold control register control, the setting should be + aligned with ITC bits at register USBCMD. + $ref: /schemas/types.yaml#/definitions/uint32 + + ahb-burst-config: + description: + it is vendor dependent, the required value should be aligned with + AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This property is + used to change AHB burst configuration, check the chipidea spec for + meaning of each value. If this property is not existed, it will use + the reset value. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0x7 + + tx-burst-size-dword: + description: + it is vendor dependent, the tx burst size in dword (4 bytes), This + register represents the maximum length of a the burst in 32-bit + words while moving data from system memory to the USB bus, the value + of this property will only take effect if property "ahb-burst-config" + is set to 0, if this property is missing the reset default of the + hardware implementation will be used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0x20 + + rx-burst-size-dword: + description: + it is vendor dependent, the rx burst size in dword (4 bytes), This + register represents the maximum length of a the burst in 32-bit words + while moving data from the USB bus to system memory, the value of + this property will only take effect if property "ahb-burst-config" + is set to 0, if this property is missing the reset default of the + hardware implementation will be used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0x20 + + extcon: + description: + Phandles to external connector devices. First phandle should point + to external connector, which provide "USB" cable events, the second + should point to external connector device, which provide "USB-HOST" + cable events. If one of the external connector devices is not + required, empty <0> phandle should be specified. + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + items: + - description: vbus extcon + - description: id extcon + + phy-clkgate-delay-us: + description: + The delay time (us) between putting the PHY into low power mode and + gating the PHY clock. + + non-zero-ttctrl-ttha: + description: + After setting this property, the value of register ttctrl.ttha + will be 0x7f; if not, the value will be 0x0, this is the default + value. It needs to be very carefully for setting this property, it + is recommended that consult with your IC engineer before setting + this value. On the most of chipidea platforms, the "usage_tt" flag + at RTL is 0, so this property only affects siTD. + + If this property is not set, the max packet size is 1023 bytes, and + if the total of packet size for previous transactions are more than + 256 bytes, it can't accept any transactions within this frame. The + use case is single transaction, but higher frame rate. + + If this property is set, the max packet size is 188 bytes, it can + handle more transactions than above case, it can accept transactions + until it considers the left room size within frame is less than 188 + bytes, software needs to make sure it does not send more than 90% + maximum_periodic_data_per_frame. The use case is multiple + transactions, but less frame rate. + type: boolean + + mux-controls: + description: + The mux control for toggling host/device output of this controller. + It's expected that a mux state of 0 indicates device mode and a mux + state of 1 indicates host mode. + maxItems: 1 + + mux-control-names: + const: usb_switch + + pinctrl-names: + description: + Names for optional pin modes in "default", "host", "device". + In case of HSIC-mode, "idle" and "active" pin modes are mandatory. + In this case, the "idle" state needs to pull down the data and + strobe pin and the "active" state needs to pull up the strobe pin. + oneOf: + - items: + - const: idle + - const: active + - items: + - const: default + - const: host + - const: device + - items: + - const: default + - enum: + - host + - device + - items: + - const: default + + pinctrl-0: + maxItems: 1 + + pinctrl-1: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: usb-phy + + vbus-supply: + description: reference to the VBUS regulator. + + usb-phy: + description: phandle for the PHY device. Use "phys" instead. + maxItems: 1 + deprecated: true + + port: + description: + Any connector to the data bus of this controller should be modelled + using the OF graph bindings specified, if the "usb-role-switch" + property is used. + $ref: /schemas/graph.yaml#/properties/port + + reset-gpios: + maxItems: 1 + +dependencies: + port: [ usb-role-switch ] + mux-controls: [ mux-control-names ] + +required: + - reg + - interrupts + +allOf: + - $ref: usb-hcd.yaml# + - $ref: usb-drd.yaml# + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml b/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml new file mode 100644 index 0000000000..8f6136f5d7 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml @@ -0,0 +1,287 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/chipidea,usb2-imx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP USB2 ChipIdea USB controller + +maintainers: + - Xu Yang + +properties: + compatible: + oneOf: + - enum: + - fsl,imx27-usb + - items: + - enum: + - fsl,imx23-usb + - fsl,imx25-usb + - fsl,imx28-usb + - fsl,imx35-usb + - fsl,imx50-usb + - fsl,imx51-usb + - fsl,imx53-usb + - fsl,imx6q-usb + - fsl,imx6sl-usb + - fsl,imx6sx-usb + - fsl,imx6ul-usb + - fsl,imx7d-usb + - fsl,vf610-usb + - const: fsl,imx27-usb + - items: + - enum: + - fsl,imx8dxl-usb + - fsl,imx8ulp-usb + - const: fsl,imx7ulp-usb + - const: fsl,imx6ul-usb + - items: + - enum: + - fsl,imx8mm-usb + - fsl,imx8mn-usb + - fsl,imx93-usb + - const: fsl,imx7d-usb + - const: fsl,imx27-usb + - items: + - enum: + - fsl,imx6sll-usb + - fsl,imx7ulp-usb + - const: fsl,imx6ul-usb + - const: fsl,imx27-usb + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + fsl,usbmisc: + description: + Phandler of non-core register device, with one argument that + indicate usb controller index + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to usbmisc node + - description: index of usb controller + + disable-over-current: + type: boolean + description: disable over current detect + + over-current-active-low: + type: boolean + description: over current signal polarity is active low + + over-current-active-high: + type: boolean + description: + Over current signal polarity is active high. It's recommended to + specify the over current polarity. + + power-active-high: + type: boolean + description: power signal polarity is active high + + external-vbus-divider: + type: boolean + description: enables off-chip resistor divider for Vbus + + samsung,picophy-pre-emp-curr-control: + description: + HS Transmitter Pre-Emphasis Current Control. This signal controls + the amount of current sourced to the USB_OTG*_DP and USB_OTG*_DN + pins after a J-to-K or K-to-J transition. The range is from 0x0 to + 0x3, the default value is 0x1. Details can refer to TXPREEMPAMPTUNE0 + bits of USBNC_n_PHY_CFG1. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0x3 + + samsung,picophy-dc-vol-level-adjust: + description: + HS DC Voltage Level Adjustment. Adjust the high-speed transmitter DC + level voltage. The range is from 0x0 to 0xf, the default value is + 0x3. Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0xf + + fsl,picophy-rise-fall-time-adjust: + description: + HS Transmitter Rise/Fall Time Adjustment. Adjust the rise/fall times + of the high-speed transmitter waveform. It has no unit. The rise/fall + time will be increased or decreased by a certain percentage relative + to design default time. (0:-10%; 1:design default; 2:+15%; 3:+20%) + Details can refer to TXRISETUNE0 bit of USBNC_n_PHY_CFG1. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 1 + + fsl,usbphy: + description: phandle of usb phy that connects to the port. Use "phys" instead. + $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true + +required: + - compatible + +allOf: + - $ref: chipidea,usb2-common.yaml# + - if: + properties: + phy_type: + const: hsic + required: + - phy_type + then: + properties: + pinctrl-names: + items: + - const: idle + - const: active + + # imx27 Soc needs three clocks + - if: + properties: + compatible: + const: fsl,imx27-usb + then: + properties: + clocks: + minItems: 3 + clock-names: + items: + - const: ipg + - const: ahb + - const: per + + # imx25 and imx35 Soc need three clocks + - if: + properties: + compatible: + contains: + enum: + - fsl,imx25-usb + - fsl,imx35-usb + then: + properties: + clocks: + minItems: 3 + clock-names: + items: + - const: ipg + - const: ahb + - const: per + + # imx93 Soc needs two clocks + - if: + properties: + compatible: + contains: + enum: + - fsl,imx93-usb + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: usb_ctrl_root + - const: usb_wakeup + + # imx7d Soc need one clock + - if: + properties: + compatible: + items: + - const: fsl,imx7d-usb + - const: fsl,imx27-usb + then: + properties: + clocks: + maxItems: 1 + clock-names: false + + # other Soc need one clock + - if: + properties: + compatible: + contains: + enum: + - fsl,imx23-usb + - fsl,imx28-usb + - fsl,imx50-usb + - fsl,imx51-usb + - fsl,imx53-usb + - fsl,imx6q-usb + - fsl,imx6sl-usb + - fsl,imx6sx-usb + - fsl,imx6ul-usb + - fsl,imx8mm-usb + - fsl,imx8mn-usb + - fsl,vf610-usb + then: + properties: + clocks: + maxItems: 1 + clock-names: false + +unevaluatedProperties: false + +examples: + - | + #include + #include + + usb@30b10000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b10000 0x200>; + interrupts = ; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc1 0>; + phy-clkgate-delay-us = <400>; + }; + + # Example for HSIC: + - | + #include + #include + + usb@2184400 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc 2>; + phy_type = "hsic"; + dr_mode = "host"; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + pinctrl-names = "idle", "active"; + pinctrl-0 = <&pinctrl_usbh2_idle>; + pinctrl-1 = <&pinctrl_usbh2_active>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usb424,9730"; + reg = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml index 3b56e0edb1..cc5787a8cf 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml @@ -15,7 +15,6 @@ properties: oneOf: - enum: - chipidea,usb2 - - fsl,imx27-usb - lsi,zevio-usb - nuvoton,npcm750-udc - nvidia,tegra20-ehci @@ -31,40 +30,6 @@ properties: - nvidia,tegra124-ehci - nvidia,tegra210-ehci - const: nvidia,tegra30-ehci - - items: - - enum: - - fsl,imx23-usb - - fsl,imx25-usb - - fsl,imx28-usb - - fsl,imx35-usb - - fsl,imx50-usb - - fsl,imx51-usb - - fsl,imx53-usb - - fsl,imx6q-usb - - fsl,imx6sl-usb - - fsl,imx6sx-usb - - fsl,imx6ul-usb - - fsl,imx7d-usb - - fsl,vf610-usb - - const: fsl,imx27-usb - - items: - - enum: - - fsl,imx8dxl-usb - - fsl,imx8ulp-usb - - const: fsl,imx7ulp-usb - - const: fsl,imx6ul-usb - - items: - - enum: - - fsl,imx8mm-usb - - fsl,imx8mn-usb - - const: fsl,imx7d-usb - - const: fsl,imx27-usb - - items: - - enum: - - fsl,imx6sll-usb - - fsl,imx7ulp-usb - - const: fsl,imx6ul-usb - - const: fsl,imx27-usb - items: - const: xlnx,zynq-usb-2.20a - const: chipidea,usb2 @@ -73,163 +38,18 @@ properties: - nuvoton,npcm845-udc - const: nuvoton,npcm750-udc - reg: - minItems: 1 - maxItems: 2 - - interrupts: - minItems: 1 - maxItems: 2 - clocks: minItems: 1 - maxItems: 3 + maxItems: 2 clock-names: minItems: 1 - maxItems: 3 - - dr_mode: true - - power-domains: - maxItems: 1 - - resets: - maxItems: 1 - - reset-names: - maxItems: 1 - - "#reset-cells": - const: 1 - - phy_type: true - - itc-setting: - description: - interrupt threshold control register control, the setting should be - aligned with ITC bits at register USBCMD. - $ref: /schemas/types.yaml#/definitions/uint32 - - ahb-burst-config: - description: - it is vendor dependent, the required value should be aligned with - AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This property is - used to change AHB burst configuration, check the chipidea spec for - meaning of each value. If this property is not existed, it will use - the reset value. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0x0 - maximum: 0x7 - - tx-burst-size-dword: - description: - it is vendor dependent, the tx burst size in dword (4 bytes), This - register represents the maximum length of a the burst in 32-bit - words while moving data from system memory to the USB bus, the value - of this property will only take effect if property "ahb-burst-config" - is set to 0, if this property is missing the reset default of the - hardware implementation will be used. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0x0 - maximum: 0x20 - - rx-burst-size-dword: - description: - it is vendor dependent, the rx burst size in dword (4 bytes), This - register represents the maximum length of a the burst in 32-bit words - while moving data from the USB bus to system memory, the value of - this property will only take effect if property "ahb-burst-config" - is set to 0, if this property is missing the reset default of the - hardware implementation will be used. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0x0 - maximum: 0x20 - - extcon: - description: - Phandles to external connector devices. First phandle should point - to external connector, which provide "USB" cable events, the second - should point to external connector device, which provide "USB-HOST" - cable events. If one of the external connector devices is not - required, empty <0> phandle should be specified. - $ref: /schemas/types.yaml#/definitions/phandle-array - minItems: 1 - items: - - description: vbus extcon - - description: id extcon - - phy-clkgate-delay-us: - description: - The delay time (us) between putting the PHY into low power mode and - gating the PHY clock. - - non-zero-ttctrl-ttha: - description: - After setting this property, the value of register ttctrl.ttha - will be 0x7f; if not, the value will be 0x0, this is the default - value. It needs to be very carefully for setting this property, it - is recommended that consult with your IC engineer before setting - this value. On the most of chipidea platforms, the "usage_tt" flag - at RTL is 0, so this property only affects siTD. - - If this property is not set, the max packet size is 1023 bytes, and - if the total of packet size for previous transactions are more than - 256 bytes, it can't accept any transactions within this frame. The - use case is single transaction, but higher frame rate. - - If this property is set, the max packet size is 188 bytes, it can - handle more transactions than above case, it can accept transactions - until it considers the left room size within frame is less than 188 - bytes, software needs to make sure it does not send more than 90% - maximum_periodic_data_per_frame. The use case is multiple - transactions, but less frame rate. - type: boolean - - mux-controls: - description: - The mux control for toggling host/device output of this controller. - It's expected that a mux state of 0 indicates device mode and a mux - state of 1 indicates host mode. - maxItems: 1 - - mux-control-names: - const: usb_switch + maxItems: 2 operating-points-v2: description: A phandle to the OPP table containing the performance states. $ref: /schemas/types.yaml#/definitions/phandle - pinctrl-names: - description: - Names for optional pin modes in "default", "host", "device". - In case of HSIC-mode, "idle" and "active" pin modes are mandatory. - In this case, the "idle" state needs to pull down the data and - strobe pin and the "active" state needs to pull up the strobe pin. - oneOf: - - items: - - const: idle - - const: active - - items: - - const: default - - enum: - - host - - device - - items: - - const: default - - pinctrl-0: - maxItems: 1 - - pinctrl-1: - maxItems: 1 - - phys: - maxItems: 1 - - phy-names: - const: usb-phy - phy-select: description: Phandler of TCSR node with two argument that indicate register @@ -240,87 +60,6 @@ properties: - description: register offset - description: phy index - vbus-supply: - description: reference to the VBUS regulator. - - fsl,usbmisc: - description: - Phandler of non-core register device, with one argument that - indicate usb controller index - $ref: /schemas/types.yaml#/definitions/phandle-array - items: - - items: - - description: phandle to usbmisc node - - description: index of usb controller - - fsl,anatop: - description: phandle for the anatop node. - $ref: /schemas/types.yaml#/definitions/phandle - - disable-over-current: - type: boolean - description: disable over current detect - - over-current-active-low: - type: boolean - description: over current signal polarity is active low - - over-current-active-high: - type: boolean - description: - Over current signal polarity is active high. It's recommended to - specify the over current polarity. - - power-active-high: - type: boolean - description: power signal polarity is active high - - external-vbus-divider: - type: boolean - description: enables off-chip resistor divider for Vbus - - samsung,picophy-pre-emp-curr-control: - description: - HS Transmitter Pre-Emphasis Current Control. This signal controls - the amount of current sourced to the USB_OTG*_DP and USB_OTG*_DN - pins after a J-to-K or K-to-J transition. The range is from 0x0 to - 0x3, the default value is 0x1. Details can refer to TXPREEMPAMPTUNE0 - bits of USBNC_n_PHY_CFG1. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0x0 - maximum: 0x3 - - samsung,picophy-dc-vol-level-adjust: - description: - HS DC Voltage Level Adjustment. Adjust the high-speed transmitter DC - level voltage. The range is from 0x0 to 0xf, the default value is - 0x3. Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0x0 - maximum: 0xf - - fsl,picophy-rise-fall-time-adjust: - description: - HS Transmitter Rise/Fall Time Adjustment. Adjust the rise/fall times - of the high-speed transmitter waveform. It has no unit. The rise/fall - time will be increased or decreased by a certain percentage relative - to design default time. (0:-10%; 1:design default; 2:+15%; 3:+20%) - Details can refer to TXRISETUNE0 bit of USBNC_n_PHY_CFG1. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 3 - default: 1 - - usb-phy: - description: phandle for the PHY device. Use "phys" instead. - maxItems: 1 - deprecated: true - - fsl,usbphy: - description: phandle of usb phy that connects to the port. Use "phys" instead. - $ref: /schemas/types.yaml#/definitions/phandle - deprecated: true - nvidia,phy: description: phandle of usb phy that connects to the port. Use "phys" instead. $ref: /schemas/types.yaml#/definitions/phandle @@ -331,16 +70,6 @@ properties: type: boolean deprecated: true - port: - description: - Any connector to the data bus of this controller should be modelled - using the OF graph bindings specified, if the "usb-role-switch" - property is used. - $ref: /schemas/graph.yaml#/properties/port - - reset-gpios: - maxItems: 1 - ulpi: type: object additionalProperties: false @@ -350,67 +79,13 @@ properties: type: object $ref: /schemas/phy/qcom,usb-hs-phy.yaml -dependencies: - port: [ usb-role-switch ] - mux-controls: [ mux-control-names ] - required: - compatible - - reg - - interrupts allOf: + - $ref: chipidea,usb2-common.yaml# - $ref: usb-hcd.yaml# - $ref: usb-drd.yaml# - - if: - properties: - phy_type: - const: hsic - required: - - phy_type - then: - properties: - pinctrl-names: - items: - - const: idle - - const: active - else: - properties: - pinctrl-names: - minItems: 1 - maxItems: 2 - oneOf: - - items: - - const: default - - enum: - - host - - device - - items: - - const: default - - if: - properties: - compatible: - contains: - enum: - - chipidea,usb2 - - lsi,zevio-usb - - nuvoton,npcm750-udc - - nvidia,tegra20-udc - - nvidia,tegra30-udc - - nvidia,tegra114-udc - - nvidia,tegra124-udc - - qcom,ci-hdrc - - xlnx,zynq-usb-2.20a - then: - properties: - fsl,usbmisc: false - disable-over-current: false - over-current-active-low: false - over-current-active-high: false - power-active-high: false - external-vbus-divider: false - samsung,picophy-pre-emp-curr-control: false - samsung,picophy-dc-vol-level-adjust: false unevaluatedProperties: false @@ -438,33 +113,4 @@ examples: mux-control-names = "usb_switch"; }; - # Example for HSIC: - - | - #include - #include - - usb@2184400 { - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; - reg = <0x02184400 0x200>; - interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_USBOH3>; - fsl,usbphy = <&usbphynop1>; - fsl,usbmisc = <&usbmisc 2>; - phy_type = "hsic"; - dr_mode = "host"; - ahb-burst-config = <0x0>; - tx-burst-size-dword = <0x10>; - rx-burst-size-dword = <0x10>; - pinctrl-names = "idle", "active"; - pinctrl-0 = <&pinctrl_usbh2_idle>; - pinctrl-1 = <&pinctrl_usbh2_active>; - #address-cells = <1>; - #size-cells = <0>; - - ethernet@1 { - compatible = "usb424,9730"; - reg = <1>; - }; - }; - ... diff --git a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml index 28096619a8..e44e88d993 100644 --- a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml +++ b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml @@ -51,7 +51,6 @@ examples: #include usb { - dr_mode = "host"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 0a5c98ea71..4f36a22aa6 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -59,6 +59,7 @@ properties: - const: amcc,dwc-otg - const: apm,apm82181-dwc-otg - const: snps,dwc2 + - const: sophgo,cv1800-usb - const: st,stm32f4x9-fsotg - const: st,stm32f4x9-hsotg - const: st,stm32f7-hsotg @@ -172,6 +173,10 @@ properties: tpl-support: true + access-controllers: + minItems: 1 + maxItems: 2 + dependencies: port: [ usb-role-switch ] role-switch-default-mode: [ usb-role-switch ] diff --git a/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml index 2d3589d284..0a6e7ac1b3 100644 --- a/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml +++ b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml @@ -33,6 +33,7 @@ properties: - fsl,imx7ulp-usbmisc - fsl,imx8mm-usbmisc - fsl,imx8mn-usbmisc + - fsl,imx8ulp-usbmisc - const: fsl,imx7d-usbmisc - const: fsl,imx6q-usbmisc - items: diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml index 924fd3d748..ef3143f4b7 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml @@ -29,6 +29,7 @@ properties: - mediatek,mt7623-xhci - mediatek,mt7629-xhci - mediatek,mt7986-xhci + - mediatek,mt7988-xhci - mediatek,mt8173-xhci - mediatek,mt8183-xhci - mediatek,mt8186-xhci diff --git a/Documentation/devicetree/bindings/usb/microchip,usb2514.yaml b/Documentation/devicetree/bindings/usb/microchip,usb2514.yaml new file mode 100644 index 0000000000..783c27591e --- /dev/null +++ b/Documentation/devicetree/bindings/usb/microchip,usb2514.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/microchip,usb2514.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip USB2514 Hub Controller + +maintainers: + - Fabio Estevam + +allOf: + - $ref: usb-hcd.yaml# + +properties: + compatible: + enum: + - usb424,2412 + - usb424,2417 + - usb424,2514 + + reg: true + + reset-gpios: + description: GPIO connected to the RESET_N pin. + + vdd-supply: + description: 3.3V power supply. + + clocks: + description: External 24MHz clock connected to the CLKIN pin. + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + #include + + usb { + #address-cells = <1>; + #size-cells = <0>; + + usb-hub@1 { + compatible = "usb424,2514"; + reg = <1>; + clocks = <&clks IMX6QDL_CLK_CKO>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + vdd-supply = <®_3v3_hub>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usbb95,772b"; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 38a3404ec7..cf633d488c 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -26,10 +26,12 @@ properties: - qcom,msm8998-dwc3 - qcom,qcm2290-dwc3 - qcom,qcs404-dwc3 + - qcom,qdu1000-dwc3 - qcom,sa8775p-dwc3 - qcom,sc7180-dwc3 - qcom,sc7280-dwc3 - qcom,sc8280xp-dwc3 + - qcom,sc8280xp-dwc3-mp - qcom,sdm660-dwc3 - qcom,sdm670-dwc3 - qcom,sdm845-dwc3 @@ -117,11 +119,11 @@ properties: exception of SDM670/SDM845/SM6350. - ss_phy_irq: Used for remote wakeup in Super Speed mode of operation. minItems: 2 - maxItems: 5 + maxItems: 18 interrupt-names: minItems: 2 - maxItems: 5 + maxItems: 18 qcom,select-utmi-as-pipe-clk: description: @@ -245,6 +247,7 @@ allOf: contains: enum: - qcom,ipq8074-dwc3 + - qcom,qdu1000-dwc3 then: properties: clocks: @@ -282,6 +285,7 @@ allOf: contains: enum: - qcom,sc8280xp-dwc3 + - qcom,sc8280xp-dwc3-mp - qcom,x1e80100-dwc3 then: properties: @@ -440,6 +444,7 @@ allOf: - qcom,ipq4019-dwc3 - qcom,ipq8064-dwc3 - qcom,msm8994-dwc3 + - qcom,qdu1000-dwc3 - qcom,sa8775p-dwc3 - qcom,sc7180-dwc3 - qcom,sc7280-dwc3 @@ -470,6 +475,38 @@ allOf: - const: dm_hs_phy_irq - const: ss_phy_irq + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8280xp-dwc3-mp + then: + properties: + interrupts: + minItems: 18 + maxItems: 18 + interrupt-names: + items: + - const: pwr_event_1 + - const: pwr_event_2 + - const: pwr_event_3 + - const: pwr_event_4 + - const: hs_phy_1 + - const: hs_phy_2 + - const: hs_phy_3 + - const: hs_phy_4 + - const: dp_hs_phy_1 + - const: dm_hs_phy_1 + - const: dp_hs_phy_2 + - const: dm_hs_phy_2 + - const: dp_hs_phy_3 + - const: dm_hs_phy_3 + - const: dp_hs_phy_4 + - const: dm_hs_phy_4 + - const: ss_phy_1 + - const: ss_phy_2 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml index d9694570c4..6d3ef36467 100644 --- a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml @@ -21,6 +21,7 @@ properties: - items: - enum: - qcom,pm6150-typec + - qcom,pm7250b-typec - const: qcom,pm8150b-typec - items: - enum: @@ -192,15 +193,22 @@ examples: port@0 { reg = <0>; - pmic_typec_mux_out: endpoint { - remote-endpoint = <&usb_phy_typec_mux_in>; + pmic_typec_hs_in: endpoint { + remote-endpoint = <&usb_hs_out>; }; }; port@1 { reg = <1>; - pmic_typec_role_switch_out: endpoint { - remote-endpoint = <&usb_role_switch_in>; + pmic_typec_ss_in: endpoint { + remote-endpoint = <&usb_phy_typec_ss_out>; + }; + }; + + port@2 { + reg = <2>; + pmic_typec_sbu: endpoint { + remote-endpoint = <&usb_mux_sbu>; }; }; }; @@ -212,8 +220,8 @@ examples: dr_mode = "otg"; usb-role-switch; port { - usb_role_switch_in: endpoint { - remote-endpoint = <&pmic_typec_role_switch_out>; + usb_hs_out: endpoint { + remote-endpoint = <&pmic_typec_hs_in>; }; }; }; @@ -221,8 +229,19 @@ examples: usb-phy { orientation-switch; port { - usb_phy_typec_mux_in: endpoint { - remote-endpoint = <&pmic_typec_mux_out>; + usb_phy_typec_ss_out: endpoint { + remote-endpoint = <&pmic_typec_ss_in>; + }; + }; + }; + + usb-mux { + orientation-switch; + mode-switch; + + port { + usb_mux_sbu: endpoint { + remote-endpoint = <&pmic_typec_sbu>; }; }; }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index 40ada78f23..c63db3ebd0 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -19,10 +19,14 @@ properties: - items: - enum: - renesas,usbhs-r7s9210 # RZ/A2 + - const: renesas,rza2-usbhs + + - items: + - enum: - renesas,usbhs-r9a07g043 # RZ/G2UL and RZ/Five - renesas,usbhs-r9a07g044 # RZ/G2{L,LC} - renesas,usbhs-r9a07g054 # RZ/V2L - - const: renesas,rza2-usbhs + - const: renesas,rzg2l-usbhs - items: - enum: diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml index 1ade99e85b..2b3430cebe 100644 --- a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml @@ -12,6 +12,7 @@ maintainers: properties: compatible: enum: + - google,gs101-dwusb3 - samsung,exynos5250-dwusb3 - samsung,exynos5433-dwusb3 - samsung,exynos7-dwusb3 @@ -55,6 +56,23 @@ required: - vdd33-supply allOf: + - if: + properties: + compatible: + contains: + const: google,gs101-dwusb3 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: bus_early + - const: susp_clk + - const: link_aclk + - const: link_pclk + - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 203a1eb666..1cd0ca9012 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -85,15 +85,16 @@ properties: phys: minItems: 1 - maxItems: 2 + maxItems: 19 phy-names: minItems: 1 - maxItems: 2 - items: - enum: - - usb2-phy - - usb3-phy + maxItems: 19 + oneOf: + - items: + enum: [ usb2-phy, usb3-phy ] + - items: + pattern: "^usb(2-([0-9]|1[0-4])|3-[0-3])$" power-domains: description: diff --git a/Documentation/devicetree/bindings/usb/usb-uhci.txt b/Documentation/devicetree/bindings/usb/usb-uhci.txt deleted file mode 100644 index d1702eb2c8..0000000000 --- a/Documentation/devicetree/bindings/usb/usb-uhci.txt +++ /dev/null @@ -1,18 +0,0 @@ -Generic Platform UHCI Controller ------------------------------------------------------ - -Required properties: -- compatible : "generic-uhci" (deprecated: "platform-uhci") -- reg : Should contain 1 register ranges(address and length) -- interrupts : UHCI controller interrupt - -additionally the properties from usb-hcd.yaml (in the current directory) are -supported. - -Example: - - uhci@d8007b00 { - compatible = "generic-uhci"; - reg = <0xd8007b00 0x200>; - interrupts = <43>; - }; diff --git a/Documentation/devicetree/bindings/usb/usb-uhci.yaml b/Documentation/devicetree/bindings/usb/usb-uhci.yaml new file mode 100644 index 0000000000..d8336f72dc --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-uhci.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-uhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Platform UHCI Controller + +maintainers: + - Greg Kroah-Hartman + +properties: + compatible: + oneOf: + - const: generic-uhci + - const: platform-uhci + deprecated: true + - items: + - enum: + - aspeed,ast2400-uhci + - aspeed,ast2500-uhci + - aspeed,ast2600-uhci + - const: generic-uhci + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#ports': + $ref: /schemas/types.yaml#/definitions/uint32 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: usb-hcd.yaml + - if: + properties: + compatible: + contains: + const: generic-uhci + then: + required: + - clocks + +unevaluatedProperties: false + +examples: + - | + #include + + usb@d8007b00 { + compatible = "generic-uhci"; + reg = <0xd8007b00 0x200>; + interrupts = <43>; + clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; + }; + - | + #include + + usb@1e6b0000 { + compatible = "aspeed,ast2500-uhci", "generic-uhci"; + reg = <0x1e6b0000 0x100>; + interrupts = <14>; + #ports = <2>; + clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; + }; +... diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index b97d298b3e..fbf47f0bac 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -151,6 +151,8 @@ patternProperties: description: ARM Ltd. "^armadeus,.*": description: ARMadeus Systems SARL + "^armsom,.*": + description: ArmSoM Technology Co., Ltd. "^arrow,.*": description: Arrow Electronics "^artesyn,.*": @@ -256,6 +258,8 @@ patternProperties: description: Catalyst Semiconductor, Inc. "^cavium,.*": description: Cavium, Inc. + "^cct,.*": + description: Crystal Clear Technology Sdn. Bhd. "^cdns,.*": description: Cadence Design Systems Inc. "^cdtech,.*": @@ -438,6 +442,8 @@ patternProperties: description: Dongguan EmbedFire Electronic Technology Co., Ltd. "^embest,.*": description: Shenzhen Embest Technology Co., Ltd. + "^emcraft,.*": + description: Emcraft Systems "^emlid,.*": description: Emlid, Ltd. "^emmicro,.*": @@ -529,6 +535,8 @@ patternProperties: description: FX Technology Ltd. "^galaxycore,.*": description: GalaxyCore Inc. + "^gameforce,.*": + description: GameForce "^gardena,.*": description: GARDENA GmbH "^gateway,.*": @@ -1627,6 +1635,8 @@ patternProperties: description: Wondermedia Technologies, Inc. "^wobo,.*": description: Wobo + "^wolfvision,.*": + description: WolfVision GmbH "^x-powers,.*": description: X-Powers "^xen,.*": diff --git a/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml new file mode 100644 index 0000000000..be78a98655 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/aspeed,ast2400-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed watchdog timer controllers + +maintainers: + - Andrew Jeffery + +properties: + compatible: + enum: + - aspeed,ast2400-wdt + - aspeed,ast2500-wdt + - aspeed,ast2600-wdt + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: > + The clock used to drive the watchdog counter. From the AST2500 no source + other than the 1MHz clock can be selected, so the clocks property is + optional. + + aspeed,reset-type: + $ref: /schemas/types.yaml#/definitions/string + enum: + - cpu + - soc + - system + - none + default: system + description: > + The watchdog can be programmed to generate one of three different types of + reset when a timeout occcurs. + + Specifying 'cpu' will only reset the processor on a timeout event. + + Specifying 'soc' will reset a configurable subset of the SoC's controllers + on a timeout event. Controllers critical to the SoC's operation may remain + untouched. The set of SoC controllers to reset may be specified via the + aspeed,reset-mask property if the node has the aspeed,ast2500-wdt or + aspeed,ast2600-wdt compatible. + + Specifying 'system' will reset all controllers on a timeout event, as if + EXTRST had been asserted. + + Specifying 'none' will cause the timeout event to have no reset effect. + Another watchdog engine on the chip must be used for chip reset operations. + + aspeed,alt-boot: + $ref: /schemas/types.yaml#/definitions/flag + description: > + Direct the watchdog to configure the SoC to boot from the alternative boot + region if a timeout occurs. + + aspeed,external-signal: + $ref: /schemas/types.yaml#/definitions/flag + description: > + Assert the timeout event on an external signal pin associated with the + watchdog controller instance. The pin must be muxed appropriately. + + aspeed,ext-pulse-duration: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + The duration, in microseconds, of the pulse emitted on the external signal + pin. + + aspeed,ext-push-pull: + $ref: /schemas/types.yaml#/definitions/flag + description: > + If aspeed,external-signal is specified in the node, set the external + signal pin's drive type to push-pull. If aspeed,ext-push-pull is not + specified then the pin is configured as open-drain. + + aspeed,ext-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: > + If both aspeed,external-signal and aspeed,ext-push-pull are specified in + the node, set the pulse polarity to active-high. If aspeed,ext-active-high + is not specified then the pin is configured as active-low. + + aspeed,reset-mask: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + description: > + A bitmask indicating which peripherals will be reset if the watchdog + timer expires. On AST2500 SoCs this should be a single word defined using + the AST2500_WDT_RESET_* macros; on AST2600 SoCs this should be a two-word + array with the first word defined using the AST2600_WDT_RESET1_* macros, + and the second word defined using the AST2600_WDT_RESET2_* macros. + +required: + - compatible + - reg + +allOf: + - if: + anyOf: + - required: + - aspeed,ext-push-pull + - required: + - aspeed,ext-active-high + - required: + - aspeed,reset-mask + then: + properties: + compatible: + enum: + - aspeed,ast2500-wdt + - aspeed,ast2600-wdt + - if: + required: + - aspeed,ext-active-high + then: + required: + - aspeed,ext-push-pull + +additionalProperties: false + +examples: + - | + watchdog@1e785000 { + compatible = "aspeed,ast2400-wdt"; + reg = <0x1e785000 0x1c>; + aspeed,reset-type = "system"; + aspeed,external-signal; + }; + - | + #include + watchdog@1e785040 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e785040 0x40>; + aspeed,reset-type = "soc"; + aspeed,reset-mask = ; + }; diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt deleted file mode 100644 index 3208adb3e5..0000000000 --- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt +++ /dev/null @@ -1,73 +0,0 @@ -Aspeed Watchdog Timer - -Required properties: - - compatible: must be one of: - - "aspeed,ast2400-wdt" - - "aspeed,ast2500-wdt" - - "aspeed,ast2600-wdt" - - - reg: physical base address of the controller and length of memory mapped - region - -Optional properties: - - - aspeed,reset-type = "cpu|soc|system|none" - - Reset behavior - Whenever a timeout occurs the watchdog can be programmed - to generate one of three different, mutually exclusive, types of resets. - - Type "none" can be specified to indicate that no resets are to be done. - This is useful in situations where another watchdog engine on chip is - to perform the reset. - - If 'aspeed,reset-type=' is not specified the default is to enable system - reset. - - Reset types: - - - cpu: Reset CPU on watchdog timeout - - - soc: Reset 'System on Chip' on watchdog timeout - - - system: Reset system on watchdog timeout - - - none: No reset is performed on timeout. Assumes another watchdog - engine is responsible for this. - - - aspeed,alt-boot: If property is present then boot from alternate block. - - aspeed,external-signal: If property is present then signal is sent to - external reset counter (only WDT1 and WDT2). If not - specified no external signal is sent. - - aspeed,ext-pulse-duration: External signal pulse duration in microseconds - -Optional properties for AST2500-compatible watchdogs: - - aspeed,ext-push-pull: If aspeed,external-signal is present, set the pin's - drive type to push-pull. The default is open-drain. - - aspeed,ext-active-high: If aspeed,external-signal is present and and the pin - is configured as push-pull, then set the pulse - polarity to active-high. The default is active-low. - -Optional properties for AST2500- and AST2600-compatible watchdogs: - - aspeed,reset-mask: A bitmask indicating which peripherals will be reset if - the watchdog timer expires. On AST2500 this should be a - single word defined using the AST2500_WDT_RESET_* macros; - on AST2600 this should be a two-word array with the first - word defined using the AST2600_WDT_RESET1_* macros and the - second word defined using the AST2600_WDT_RESET2_* macros. - -Examples: - - wdt1: watchdog@1e785000 { - compatible = "aspeed,ast2400-wdt"; - reg = <0x1e785000 0x1c>; - aspeed,reset-type = "system"; - aspeed,external-signal; - }; - - #include - wdt2: watchdog@1e785040 { - compatible = "aspeed,ast2600-wdt"; - reg = <0x1e785040 0x40>; - aspeed,reset-mask = ; - }; diff --git a/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt b/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt deleted file mode 100644 index 80a37193c0..0000000000 --- a/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt +++ /dev/null @@ -1,10 +0,0 @@ -Device tree bindings for twl4030-wdt driver (TWL4030 watchdog) - -Required properties: - compatible = "ti,twl4030-wdt"; - -Example: - -watchdog { - compatible = "ti,twl4030-wdt"; -}; -- cgit v1.2.3