From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- .../driver-api/media/drivers/bttv-devel.rst | 116 + .../driver-api/media/drivers/ccs/ccs-regs.asc | 1041 ++++++ Documentation/driver-api/media/drivers/ccs/ccs.rst | 117 + .../driver-api/media/drivers/ccs/mk-ccs-regs | 434 +++ .../driver-api/media/drivers/contributors.rst | 131 + .../driver-api/media/drivers/cx2341x-devel.rst | 3685 ++++++++++++++++++++ .../driver-api/media/drivers/cx88-devel.rst | 113 + Documentation/driver-api/media/drivers/dvb-usb.rst | 357 ++ .../driver-api/media/drivers/fimc-devel.rst | 33 + .../driver-api/media/drivers/frontends.rst | 32 + Documentation/driver-api/media/drivers/index.rst | 40 + Documentation/driver-api/media/drivers/pvrusb2.rst | 202 ++ .../driver-api/media/drivers/pxa_camera.rst | 194 ++ .../driver-api/media/drivers/radiotrack.rst | 168 + Documentation/driver-api/media/drivers/rkisp1.rst | 43 + .../driver-api/media/drivers/saa7134-devel.rst | 67 + .../media/drivers/sh_mobile_ceu_camera.rst | 142 + Documentation/driver-api/media/drivers/tuners.rst | 133 + Documentation/driver-api/media/drivers/vidtv.rst | 513 +++ .../driver-api/media/drivers/vimc-devel.rst | 15 + Documentation/driver-api/media/drivers/zoran.rst | 575 +++ 21 files changed, 8151 insertions(+) create mode 100644 Documentation/driver-api/media/drivers/bttv-devel.rst create mode 100644 Documentation/driver-api/media/drivers/ccs/ccs-regs.asc create mode 100644 Documentation/driver-api/media/drivers/ccs/ccs.rst create mode 100755 Documentation/driver-api/media/drivers/ccs/mk-ccs-regs create mode 100644 Documentation/driver-api/media/drivers/contributors.rst create mode 100644 Documentation/driver-api/media/drivers/cx2341x-devel.rst create mode 100644 Documentation/driver-api/media/drivers/cx88-devel.rst create mode 100644 Documentation/driver-api/media/drivers/dvb-usb.rst create mode 100644 Documentation/driver-api/media/drivers/fimc-devel.rst create mode 100644 Documentation/driver-api/media/drivers/frontends.rst create mode 100644 Documentation/driver-api/media/drivers/index.rst create mode 100644 Documentation/driver-api/media/drivers/pvrusb2.rst create mode 100644 Documentation/driver-api/media/drivers/pxa_camera.rst create mode 100644 Documentation/driver-api/media/drivers/radiotrack.rst create mode 100644 Documentation/driver-api/media/drivers/rkisp1.rst create mode 100644 Documentation/driver-api/media/drivers/saa7134-devel.rst create mode 100644 Documentation/driver-api/media/drivers/sh_mobile_ceu_camera.rst create mode 100644 Documentation/driver-api/media/drivers/tuners.rst create mode 100644 Documentation/driver-api/media/drivers/vidtv.rst create mode 100644 Documentation/driver-api/media/drivers/vimc-devel.rst create mode 100644 Documentation/driver-api/media/drivers/zoran.rst (limited to 'Documentation/driver-api/media/drivers') diff --git a/Documentation/driver-api/media/drivers/bttv-devel.rst b/Documentation/driver-api/media/drivers/bttv-devel.rst new file mode 100644 index 0000000000..0885a04563 --- /dev/null +++ b/Documentation/driver-api/media/drivers/bttv-devel.rst @@ -0,0 +1,116 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The bttv driver +=============== + +bttv and sound mini howto +------------------------- + +There are a lot of different bt848/849/878/879 based boards available. +Making video work often is not a big deal, because this is handled +completely by the bt8xx chip, which is common on all boards. But +sound is handled in slightly different ways on each board. + +To handle the grabber boards correctly, there is a array tvcards[] in +bttv-cards.c, which holds the information required for each board. +Sound will work only, if the correct entry is used (for video it often +makes no difference). The bttv driver prints a line to the kernel +log, telling which card type is used. Like this one:: + + bttv0: model: BT848(Hauppauge old) [autodetected] + +You should verify this is correct. If it isn't, you have to pass the +correct board type as insmod argument, ``insmod bttv card=2`` for +example. The file Documentation/admin-guide/media/bttv-cardlist.rst has a list +of valid arguments for card. + +If your card isn't listed there, you might check the source code for +new entries which are not listed yet. If there isn't one for your +card, you can check if one of the existing entries does work for you +(just trial and error...). + +Some boards have an extra processor for sound to do stereo decoding +and other nice features. The msp34xx chips are used by Hauppauge for +example. If your board has one, you might have to load a helper +module like ``msp3400`` to make sound work. If there isn't one for the +chip used on your board: Bad luck. Start writing a new one. Well, +you might want to check the video4linux mailing list archive first... + +Of course you need a correctly installed soundcard unless you have the +speakers connected directly to the grabber board. Hint: check the +mixer settings too. ALSA for example has everything muted by default. + + +How sound works in detail +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Still doesn't work? Looks like some driver hacking is required. +Below is a do-it-yourself description for you. + +The bt8xx chips have 32 general purpose pins, and registers to control +these pins. One register is the output enable register +(``BT848_GPIO_OUT_EN``), it says which pins are actively driven by the +bt848 chip. Another one is the data register (``BT848_GPIO_DATA``), where +you can get/set the status if these pins. They can be used for input +and output. + +Most grabber board vendors use these pins to control an external chip +which does the sound routing. But every board is a little different. +These pins are also used by some companies to drive remote control +receiver chips. Some boards use the i2c bus instead of the gpio pins +to connect the mux chip. + +As mentioned above, there is a array which holds the required +information for each known board. You basically have to create a new +line for your board. The important fields are these two:: + + struct tvcard + { + [ ... ] + u32 gpiomask; + u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */ + }; + +gpiomask specifies which pins are used to control the audio mux chip. +The corresponding bits in the output enable register +(``BT848_GPIO_OUT_EN``) will be set as these pins must be driven by the +bt848 chip. + +The ``audiomux[]`` array holds the data values for the different inputs +(i.e. which pins must be high/low for tuner/mute/...). This will be +written to the data register (``BT848_GPIO_DATA``) to switch the audio +mux. + + +What you have to do is figure out the correct values for gpiomask and +the audiomux array. If you have Windows and the drivers four your +card installed, you might to check out if you can read these registers +values used by the windows driver. A tool to do this is available +from http://btwincap.sourceforge.net/download.html. + +You might also dig around in the ``*.ini`` files of the Windows applications. +You can have a look at the board to see which of the gpio pins are +connected at all and then start trial-and-error ... + + +Starting with release 0.7.41 bttv has a number of insmod options to +make the gpio debugging easier: + + ================= ============================================== + bttv_gpio=0/1 enable/disable gpio debug messages + gpiomask=n set the gpiomask value + audiomux=i,j,... set the values of the audiomux array + audioall=a set the values of the audiomux array (one + value for all array elements, useful to check + out which effect the particular value has). + ================= ============================================== + +The messages printed with ``bttv_gpio=1`` look like this:: + + bttv0: gpio: en=00000027, out=00000024 in=00ffffd8 [audio: off] + + en = output _en_able register (BT848_GPIO_OUT_EN) + out = _out_put bits of the data register (BT848_GPIO_DATA), + i.e. BT848_GPIO_DATA & BT848_GPIO_OUT_EN + in = _in_put bits of the data register, + i.e. BT848_GPIO_DATA & ~BT848_GPIO_OUT_EN diff --git a/Documentation/driver-api/media/drivers/ccs/ccs-regs.asc b/Documentation/driver-api/media/drivers/ccs/ccs-regs.asc new file mode 100644 index 0000000000..bbf9213c33 --- /dev/null +++ b/Documentation/driver-api/media/drivers/ccs/ccs-regs.asc @@ -0,0 +1,1041 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause +# Copyright (C) 2019--2020 Intel Corporation + +# register rflags +# - f field LSB MSB rflags +# - e enum value # after a field +# - e enum value [LSB MSB] +# - b bool bit +# - l arg name min max elsize [discontig...] +# +# rflags +# 8, 16, 32 register bits (default is 8) +# v1.1 defined in version 1.1 +# f formula +# float_ireal iReal or IEEE 754; 32 bits +# ireal unsigned iReal + +# general status registers +module_model_id 0x0000 16 +module_revision_number_major 0x0002 8 +frame_count 0x0005 8 +pixel_order 0x0006 8 +- e GRBG 0 +- e RGGB 1 +- e BGGR 2 +- e GBRG 3 +MIPI_CCS_version 0x0007 8 +- e v1_0 0x10 +- e v1_1 0x11 +- f major 4 7 +- f minor 0 3 +data_pedestal 0x0008 16 +module_manufacturer_id 0x000e 16 +module_revision_number_minor 0x0010 8 +module_date_year 0x0012 8 +module_date_month 0x0013 8 +module_date_day 0x0014 8 +module_date_phase 0x0015 8 +- f 0 2 +- e ts 0 +- e es 1 +- e cs 2 +- e mp 3 +sensor_model_id 0x0016 16 +sensor_revision_number 0x0018 8 +sensor_firmware_version 0x001a 8 +serial_number 0x001c 32 +sensor_manufacturer_id 0x0020 16 +sensor_revision_number_16 0x0022 16 + +# frame format description registers +frame_format_model_type 0x0040 8 +- e 2-byte 1 +- e 4-byte 2 +frame_format_model_subtype 0x0041 8 +- f rows 0 3 +- f columns 4 7 +frame_format_descriptor(n) 0x0042 16 f +- l n 0 14 2 +- f pixels 0 11 +- f pcode 12 15 +- e embedded 1 +- e dummy_pixel 2 +- e black_pixel 3 +- e dark_pixel 4 +- e visible_pixel 5 +- e manuf_specific_0 8 +- e manuf_specific_1 9 +- e manuf_specific_2 10 +- e manuf_specific_3 11 +- e manuf_specific_4 12 +- e manuf_specific_5 13 +- e manuf_specific_6 14 +frame_format_descriptor_4(n) 0x0060 32 f +- l n 0 7 4 +- f pixels 0 15 +- f pcode 28 31 +- e embedded 1 +- e dummy_pixel 2 +- e black_pixel 3 +- e dark_pixel 4 +- e visible_pixel 5 +- e manuf_specific_0 8 +- e manuf_specific_1 9 +- e manuf_specific_2 10 +- e manuf_specific_3 11 +- e manuf_specific_4 12 +- e manuf_specific_5 13 +- e manuf_specific_6 14 + +# analog gain description registers +analog_gain_capability 0x0080 16 +- e global 0 +- e alternate_global 2 +analog_gain_code_min 0x0084 16 +analog_gain_code_max 0x0086 16 +analog_gain_code_step 0x0088 16 +analog_gain_type 0x008a 16 +analog_gain_m0 0x008c 16 +analog_gain_c0 0x008e 16 +analog_gain_m1 0x0090 16 +analog_gain_c1 0x0092 16 +analog_linear_gain_min 0x0094 16 v1.1 +analog_linear_gain_max 0x0096 16 v1.1 +analog_linear_gain_step_size 0x0098 16 v1.1 +analog_exponential_gain_min 0x009a 16 v1.1 +analog_exponential_gain_max 0x009c 16 v1.1 +analog_exponential_gain_step_size 0x009e 16 v1.1 + +# data format description registers +data_format_model_type 0x00c0 8 +- e normal 1 +- e extended 2 +data_format_model_subtype 0x00c1 8 +- f rows 0 3 +- f columns 4 7 +data_format_descriptor(n) 0x00c2 16 f +- l n 0 15 2 +- f compressed 0 7 +- f uncompressed 8 15 + +# general set-up registers +mode_select 0x0100 8 +- e software_standby 0 +- e streaming 1 +image_orientation 0x0101 8 +- b horizontal_mirror 0 +- b vertical_flip 1 +software_reset 0x0103 8 +- e off 0 +- e on 1 +grouped_parameter_hold 0x0104 8 +mask_corrupted_frames 0x0105 8 +- e allow 0 +- e mask 1 +fast_standby_ctrl 0x0106 8 +- e complete_frames 0 +- e frame_truncation 1 +CCI_address_ctrl 0x0107 8 +2nd_CCI_if_ctrl 0x0108 8 +- b enable 0 +- b ack 1 +2nd_CCI_address_ctrl 0x0109 8 +CSI_channel_identifier 0x0110 8 +CSI_signaling_mode 0x0111 8 +- e csi_2_dphy 2 +- e csi_2_cphy 3 +CSI_data_format 0x0112 16 +CSI_lane_mode 0x0114 8 +DPCM_Frame_DT 0x011d 8 +Bottom_embedded_data_DT 0x011e 8 +Bottom_embedded_data_VC 0x011f 8 + +gain_mode 0x0120 8 +- e global 0 +- e alternate 1 +ADC_bit_depth 0x0121 8 +emb_data_ctrl 0x0122 v1.1 +- b raw8_packing_for_raw16 0 +- b raw10_packing_for_raw20 1 +- b raw12_packing_for_raw24 2 + +GPIO_TRIG_mode 0x0130 8 +extclk_frequency_mhz 0x0136 16 ireal +temp_sensor_ctrl 0x0138 8 +- b enable 0 +temp_sensor_mode 0x0139 8 +temp_sensor_output 0x013a 8 + +# integration time registers +fine_integration_time 0x0200 16 +coarse_integration_time 0x0202 16 + +# analog gain registers +analog_gain_code_global 0x0204 16 +analog_linear_gain_global 0x0206 16 v1.1 +analog_exponential_gain_global 0x0208 16 v1.1 + +# digital gain registers +digital_gain_global 0x020e 16 + +# hdr control registers +Short_analog_gain_global 0x0216 16 +Short_digital_gain_global 0x0218 16 + +HDR_mode 0x0220 8 +- b enabled 0 +- b separate_analog_gain 1 +- b upscaling 2 +- b reset_sync 3 +- b timing_mode 4 +- b exposure_ctrl_direct 5 +- b separate_digital_gain 6 +HDR_resolution_reduction 0x0221 8 +- f row 0 3 +- f column 4 7 +Exposure_ratio 0x0222 8 +HDR_internal_bit_depth 0x0223 8 +Direct_short_integration_time 0x0224 16 +Short_analog_linear_gain_global 0x0226 16 v1.1 +Short_analog_exponential_gain_global 0x0228 16 v1.1 + +# clock set-up registers +vt_pix_clk_div 0x0300 16 +vt_sys_clk_div 0x0302 16 +pre_pll_clk_div 0x0304 16 +#vt_pre_pll_clk_div 0x0304 16 +pll_multiplier 0x0306 16 +#vt_pll_multiplier 0x0306 16 +op_pix_clk_div 0x0308 16 +op_sys_clk_div 0x030a 16 +op_pre_pll_clk_div 0x030c 16 +op_pll_multiplier 0x030e 16 +pll_mode 0x0310 8 +- f 0 0 +- e single 0 +- e dual 1 +op_pix_clk_div_rev 0x0312 16 v1.1 +op_sys_clk_div_rev 0x0314 16 v1.1 + +# frame timing registers +frame_length_lines 0x0340 16 +line_length_pck 0x0342 16 + +# image size registers +x_addr_start 0x0344 16 +y_addr_start 0x0346 16 +x_addr_end 0x0348 16 +y_addr_end 0x034a 16 +x_output_size 0x034c 16 +y_output_size 0x034e 16 + +# timing mode registers +Frame_length_ctrl 0x0350 8 +- b automatic 0 +Timing_mode_ctrl 0x0352 8 +- b manual_readout 0 +- b delayed_exposure 1 +Start_readout_rs 0x0353 8 +- b manual_readout_start 0 +Frame_margin 0x0354 16 + +# sub-sampling registers +x_even_inc 0x0380 16 +x_odd_inc 0x0382 16 +y_even_inc 0x0384 16 +y_odd_inc 0x0386 16 + +# monochrome readout registers +monochrome_en 0x0390 v1.1 +- e enabled 0 + +# image scaling registers +Scaling_mode 0x0400 16 +- e no_scaling 0 +- e horizontal 1 +scale_m 0x0404 16 +scale_n 0x0406 16 +digital_crop_x_offset 0x0408 16 +digital_crop_y_offset 0x040a 16 +digital_crop_image_width 0x040c 16 +digital_crop_image_height 0x040e 16 + +# image compression registers +compression_mode 0x0500 16 +- e none 0 +- e dpcm_pcm_simple 1 + +# test pattern registers +test_pattern_mode 0x0600 16 +- e none 0 +- e solid_color 1 +- e color_bars 2 +- e fade_to_grey 3 +- e pn9 4 +- e color_tile 5 +test_data_red 0x0602 16 +test_data_greenR 0x0604 16 +test_data_blue 0x0606 16 +test_data_greenB 0x0608 16 +value_step_size_smooth 0x060a 8 +value_step_size_quantised 0x060b 8 + +# phy configuration registers +tclk_post 0x0800 8 +ths_prepare 0x0801 8 +ths_zero_min 0x0802 8 +ths_trail 0x0803 8 +tclk_trail_min 0x0804 8 +tclk_prepare 0x0805 8 +tclk_zero 0x0806 8 +tlpx 0x0807 8 +phy_ctrl 0x0808 8 +- e auto 0 +- e UI 1 +- e manual 2 +tclk_post_ex 0x080a 16 +ths_prepare_ex 0x080c 16 +ths_zero_min_ex 0x080e 16 +ths_trail_ex 0x0810 16 +tclk_trail_min_ex 0x0812 16 +tclk_prepare_ex 0x0814 16 +tclk_zero_ex 0x0816 16 +tlpx_ex 0x0818 16 + +# link rate register +requested_link_rate 0x0820 32 u16.16 + +# equalization control registers +DPHY_equalization_mode 0x0824 8 v1.1 +- b eq2 0 +PHY_equalization_ctrl 0x0825 8 v1.1 +- b enable 0 + +# d-phy preamble control registers +DPHY_preamble_ctrl 0x0826 8 v1.1 +- b enable 0 +DPHY_preamble_length 0x0826 8 v1.1 + +# d-phy spread spectrum control registers +PHY_SSC_ctrl 0x0828 8 v1.1 +- b enable 0 + +# manual lp control register +manual_LP_ctrl 0x0829 8 v1.1 +- b enable 0 + +# additional phy configuration registers +twakeup 0x082a v1.1 +tinit 0x082b v1.1 +ths_exit 0x082c v1.1 +ths_exit_ex 0x082e 16 v1.1 + +# phy calibration configuration registers +PHY_periodic_calibration_ctrl 0x0830 8 +- b frame_blanking 0 +PHY_periodic_calibration_interval 0x0831 8 +PHY_init_calibration_ctrl 0x0832 8 +- b stream_start 0 +DPHY_calibration_mode 0x0833 8 v1.1 +- b also_alternate 0 +CPHY_calibration_mode 0x0834 8 v1.1 +- e format_1 0 +- e format_2 1 +- e format_3 2 +t3_calpreamble_length 0x0835 8 v1.1 +t3_calpreamble_length_per 0x0836 8 v1.1 +t3_calaltseq_length 0x0837 8 v1.1 +t3_calaltseq_length_per 0x0838 8 v1.1 +FM2_init_seed 0x083a 16 v1.1 +t3_caludefseq_length 0x083c 16 v1.1 +t3_caludefseq_length_per 0x083e 16 v1.1 + +# c-phy manual control registers +TGR_Preamble_Length 0x0841 8 +- b preamable_prog_seq 7 +- f begin_preamble_length 0 5 +TGR_Post_Length 0x0842 8 +- f post_length 0 4 +TGR_Preamble_Prog_Sequence(n2) 0x0843 +- l n2 0 6 1 +- f symbol_n_1 3 5 +- f symbol_n 0 2 +t3_prepare 0x084e 16 +t3_lpx 0x0850 16 + +# alps control register +ALPS_ctrl 0x085a 8 +- b lvlp_dphy 0 +- b lvlp_cphy 1 +- b alp_cphy 2 + +# lrte control registers +TX_REG_CSI_EPD_EN_SSP_cphy 0x0860 16 +TX_REG_CSI_EPD_OP_SLP_cphy 0x0862 16 +TX_REG_CSI_EPD_EN_SSP_dphy 0x0864 16 +TX_REG_CSI_EPD_OP_SLP_dphy 0x0866 16 +TX_REG_CSI_EPD_MISC_OPTION_cphy 0x0868 v1.1 +TX_REG_CSI_EPD_MISC_OPTION_dphy 0x0869 v1.1 + +# scrambling control registers +Scrambling_ctrl 0x0870 +- b enabled 0 +- f 2 3 +- e 1_seed_cphy 0 +- e 4_seed_cphy 3 +lane_seed_value(seed, lane) 0x0872 16 +- l seed 0 3 0x10 +- l lane 0 7 0x2 + +# usl control registers +TX_USL_REV_ENTRY 0x08c0 16 v1.1 +TX_USL_REV_Clock_Counter 0x08c2 16 v1.1 +TX_USL_REV_LP_Counter 0x08c4 16 v1.1 +TX_USL_REV_Frame_Counter 0x08c6 16 v1.1 +TX_USL_REV_Chronological_Timer 0x08c8 16 v1.1 +TX_USL_FWD_ENTRY 0x08ca 16 v1.1 +TX_USL_GPIO 0x08cc 16 v1.1 +TX_USL_Operation 0x08ce 16 v1.1 +- b reset 0 +TX_USL_ALP_ctrl 0x08d0 16 v1.1 +- b clock_pause 0 +TX_USL_APP_BTA_ACK_TIMEOUT 0x08d2 16 v1.1 +TX_USL_SNS_BTA_ACK_TIMEOUT 0x08d2 16 v1.1 +USL_Clock_Mode_d_ctrl 0x08d2 v1.1 +- b cont_clock_standby 0 +- b cont_clock_vblank 1 +- b cont_clock_hblank 2 + +# binning configuration registers +binning_mode 0x0900 8 +binning_type 0x0901 8 +binning_weighting 0x0902 8 + +# data transfer interface registers +data_transfer_if_1_ctrl 0x0a00 8 +- b enable 0 +- b write 1 +- b clear_error 2 +data_transfer_if_1_status 0x0a01 8 +- b read_if_ready 0 +- b write_if_ready 1 +- b data_corrupted 2 +- b improper_if_usage 3 +data_transfer_if_1_page_select 0x0a02 8 +data_transfer_if_1_data(p) 0x0a04 8 f +- l p 0 63 1 + +# image processing and sensor correction configuration registers +shading_correction_en 0x0b00 8 +- b enable 0 +luminance_correction_level 0x0b01 8 +green_imbalance_filter_en 0x0b02 8 +- b enable 0 +mapped_defect_correct_en 0x0b05 8 +- b enable 0 +single_defect_correct_en 0x0b06 8 +- b enable 0 +dynamic_couplet_correct_en 0x0b08 8 +- b enable 0 +combined_defect_correct_en 0x0b0a 8 +- b enable 0 +module_specific_correction_en 0x0b0c 8 +- b enable 0 +dynamic_triplet_defect_correct_en 0x0b13 8 +- b enable 0 +NF_ctrl 0x0b15 8 +- b luma 0 +- b chroma 1 +- b combined 2 + +# optical black pixel readout registers +OB_readout_control 0x0b30 8 +- b enable 0 +- b interleaving 1 +OB_virtual_channel 0x0b31 8 +OB_DT 0x0b32 8 +OB_data_format 0x0b33 8 + +# color temperature feedback registers +color_temperature 0x0b8c 16 +absolute_gain_greenr 0x0b8e 16 +absolute_gain_red 0x0b90 16 +absolute_gain_blue 0x0b92 16 +absolute_gain_greenb 0x0b94 16 + +# cfa conversion registers +CFA_conversion_ctrl 0x0ba0 v1.1 +- b bayer_conversion_enable 0 + +# flash strobe and sa strobe control registers +flash_strobe_adjustment 0x0c12 8 +flash_strobe_start_point 0x0c14 16 +tflash_strobe_delay_rs_ctrl 0x0c16 16 +tflash_strobe_width_high_rs_ctrl 0x0c18 16 +flash_mode_rs 0x0c1a 8 +- b continuous 0 +- b truncate 1 +- b async 3 +flash_trigger_rs 0x0c1b 8 +flash_status 0x0c1c 8 +- b retimed 0 +sa_strobe_mode 0x0c1d 8 +- b continuous 0 +- b truncate 1 +- b async 3 +- b adjust_edge 4 +sa_strobe_start_point 0x0c1e 16 +tsa_strobe_delay_ctrl 0x0c20 16 +tsa_strobe_width_ctrl 0x0c22 16 +sa_strobe_trigger 0x0c24 8 +sa_strobe_status 0x0c25 8 +- b retimed 0 +tSA_strobe_re_delay_ctrl 0x0c30 16 +tSA_strobe_fe_delay_ctrl 0x0c32 16 + +# pdaf control registers +PDAF_ctrl 0x0d00 16 +- b enable 0 +- b processed 1 +- b interleaved 2 +- b visible_pdaf_correction 3 +PDAF_VC 0x0d02 8 +PDAF_DT 0x0d03 8 +pd_x_addr_start 0x0d04 16 +pd_y_addr_start 0x0d06 16 +pd_x_addr_end 0x0d08 16 +pd_y_addr_end 0x0d0a 16 + +# bracketing interface configuration registers +bracketing_LUT_ctrl 0x0e00 8 +bracketing_LUT_mode 0x0e01 8 +- b continue_streaming 0 +- b loop_mode 1 +bracketing_LUT_entry_ctrl 0x0e02 8 +bracketing_LUT_frame(n) 0x0e10 v1.1 f +- l n 0 0xef 1 + +# integration time and gain parameter limit registers +integration_time_capability 0x1000 16 +- b fine 0 +coarse_integration_time_min 0x1004 16 +coarse_integration_time_max_margin 0x1006 16 +fine_integration_time_min 0x1008 16 +fine_integration_time_max_margin 0x100a 16 + +# digital gain parameter limit registers +digital_gain_capability 0x1081 +- e none 0 +- e global 2 +digital_gain_min 0x1084 16 +digital_gain_max 0x1086 16 +digital_gain_step_size 0x1088 16 + +# data pedestal capability registers +Pedestal_capability 0x10e0 8 v1.1 + +# adc capability registers +ADC_capability 0x10f0 8 +- b bit_depth_ctrl 0 +ADC_bit_depth_capability 0x10f4 32 v1.1 + +# video timing parameter limit registers +min_ext_clk_freq_mhz 0x1100 32 float_ireal +max_ext_clk_freq_mhz 0x1104 32 float_ireal +min_pre_pll_clk_div 0x1108 16 +# min_vt_pre_pll_clk_div 0x1108 16 +max_pre_pll_clk_div 0x110a 16 +# max_vt_pre_pll_clk_div 0x110a 16 +min_pll_ip_clk_freq_mhz 0x110c 32 float_ireal +# min_vt_pll_ip_clk_freq_mhz 0x110c 32 float_ireal +max_pll_ip_clk_freq_mhz 0x1110 32 float_ireal +# max_vt_pll_ip_clk_freq_mhz 0x1110 32 float_ireal +min_pll_multiplier 0x1114 16 +# min_vt_pll_multiplier 0x1114 16 +max_pll_multiplier 0x1116 16 +# max_vt_pll_multiplier 0x1116 16 +min_pll_op_clk_freq_mhz 0x1118 32 float_ireal +max_pll_op_clk_freq_mhz 0x111c 32 float_ireal + +# video timing set-up capability registers +min_vt_sys_clk_div 0x1120 16 +max_vt_sys_clk_div 0x1122 16 +min_vt_sys_clk_freq_mhz 0x1124 32 float_ireal +max_vt_sys_clk_freq_mhz 0x1128 32 float_ireal +min_vt_pix_clk_freq_mhz 0x112c 32 float_ireal +max_vt_pix_clk_freq_mhz 0x1130 32 float_ireal +min_vt_pix_clk_div 0x1134 16 +max_vt_pix_clk_div 0x1136 16 +clock_calculation 0x1138 +- b lane_speed 0 +- b link_decoupled 1 +- b dual_pll_op_sys_ddr 2 +- b dual_pll_op_pix_ddr 3 +num_of_vt_lanes 0x1139 +num_of_op_lanes 0x113a +op_bits_per_lane 0x113b 8 v1.1 + +# frame timing parameter limits +min_frame_length_lines 0x1140 16 +max_frame_length_lines 0x1142 16 +min_line_length_pck 0x1144 16 +max_line_length_pck 0x1146 16 +min_line_blanking_pck 0x1148 16 +min_frame_blanking_lines 0x114a 16 +min_line_length_pck_step_size 0x114c +timing_mode_capability 0x114d +- b auto_frame_length 0 +- b rolling_shutter_manual_readout 2 +- b delayed_exposure_start 3 +- b manual_exposure_embedded_data 4 +frame_margin_max_value 0x114e 16 +frame_margin_min_value 0x1150 +gain_delay_type 0x1151 +- e fixed 0 +- e variable 1 + +# output clock set-up capability registers +min_op_sys_clk_div 0x1160 16 +max_op_sys_clk_div 0x1162 16 +min_op_sys_clk_freq_mhz 0x1164 32 float_ireal +max_op_sys_clk_freq_mhz 0x1168 32 float_ireal +min_op_pix_clk_div 0x116c 16 +max_op_pix_clk_div 0x116e 16 +min_op_pix_clk_freq_mhz 0x1170 32 float_ireal +max_op_pix_clk_freq_mhz 0x1174 32 float_ireal + +# image size parameter limit registers +x_addr_min 0x1180 16 +y_addr_min 0x1182 16 +x_addr_max 0x1184 16 +y_addr_max 0x1186 16 +min_x_output_size 0x1188 16 +min_y_output_size 0x118a 16 +max_x_output_size 0x118c 16 +max_y_output_size 0x118e 16 + +x_addr_start_div_constant 0x1190 v1.1 +y_addr_start_div_constant 0x1191 v1.1 +x_addr_end_div_constant 0x1192 v1.1 +y_addr_end_div_constant 0x1193 v1.1 +x_size_div 0x1194 v1.1 +y_size_div 0x1195 v1.1 +x_output_div 0x1196 v1.1 +y_output_div 0x1197 v1.1 +non_flexible_resolution_support 0x1198 v1.1 +- b new_pix_addr 0 +- b new_output_res 1 +- b output_crop_no_pad 2 +- b output_size_lane_dep 3 + +min_op_pre_pll_clk_div 0x11a0 16 +max_op_pre_pll_clk_div 0x11a2 16 +min_op_pll_ip_clk_freq_mhz 0x11a4 32 float_ireal +max_op_pll_ip_clk_freq_mhz 0x11a8 32 float_ireal +min_op_pll_multiplier 0x11ac 16 +max_op_pll_multiplier 0x11ae 16 +min_op_pll_op_clk_freq_mhz 0x11b0 32 float_ireal +max_op_pll_op_clk_freq_mhz 0x11b4 32 float_ireal +clock_tree_pll_capability 0x11b8 8 +- b dual_pll 0 +- b single_pll 1 +- b ext_divider 2 +- b flexible_op_pix_clk_div 3 +clock_capa_type_capability 0x11b9 v1.1 +- b ireal 0 + +# sub-sampling parameters limit registers +min_even_inc 0x11c0 16 +min_odd_inc 0x11c2 16 +max_even_inc 0x11c4 16 +max_odd_inc 0x11c6 16 +aux_subsamp_capability 0x11c8 v1.1 +- b factor_power_of_2 1 +aux_subsamp_mono_capability 0x11c9 v1.1 +- b factor_power_of_2 1 +monochrome_capability 0x11ca v1.1 +- e inc_odd 0 +- e inc_even 1 +pixel_readout_capability 0x11cb v1.1 +- e bayer 0 +- e monochrome 1 +- e bayer_and_mono 2 +min_even_inc_mono 0x11cc 16 v1.1 +max_even_inc_mono 0x11ce 16 v1.1 +min_odd_inc_mono 0x11d0 16 v1.1 +max_odd_inc_mono 0x11d2 16 v1.1 +min_even_inc_bc2 0x11d4 16 v1.1 +max_even_inc_bc2 0x11d6 16 v1.1 +min_odd_inc_bc2 0x11d8 16 v1.1 +max_odd_inc_bc2 0x11da 16 v1.1 +min_even_inc_mono_bc2 0x11dc 16 v1.1 +max_even_inc_mono_bc2 0x11de 16 v1.1 +min_odd_inc_mono_bc2 0x11f0 16 v1.1 +max_odd_inc_mono_bc2 0x11f2 16 v1.1 + +# image scaling limit parameters +scaling_capability 0x1200 16 +- e none 0 +- e horizontal 1 +- e reserved 2 +scaler_m_min 0x1204 16 +scaler_m_max 0x1206 16 +scaler_n_min 0x1208 16 +scaler_n_max 0x120a 16 +digital_crop_capability 0x120e +- e none 0 +- e input_crop 1 + +# hdr limit registers +hdr_capability_1 0x1210 +- b 2x2_binning 0 +- b combined_analog_gain 1 +- b separate_analog_gain 2 +- b upscaling 3 +- b reset_sync 4 +- b direct_short_exp_timing 5 +- b direct_short_exp_synthesis 6 +min_hdr_bit_depth 0x1211 +hdr_resolution_sub_types 0x1212 +hdr_resolution_sub_type(n) 0x1213 +- l n 0 1 1 +- f row 0 3 +- f column 4 7 +hdr_capability_2 0x121b +- b combined_digital_gain 0 +- b separate_digital_gain 1 +- b timing_mode 3 +- b synthesis_mode 4 +max_hdr_bit_depth 0x121c + +# usl capability register +usl_support_capability 0x1230 v1.1 +- b clock_tree 0 +- b rev_clock_tree 1 +- b rev_clock_calc 2 +usl_clock_mode_d_capability 0x1231 v1.1 +- b cont_clock_standby 0 +- b cont_clock_vblank 1 +- b cont_clock_hblank 2 +- b noncont_clock_standby 3 +- b noncont_clock_vblank 4 +- b noncont_clock_hblank 5 +min_op_sys_clk_div_rev 0x1234 v1.1 +max_op_sys_clk_div_rev 0x1236 v1.1 +min_op_pix_clk_div_rev 0x1238 v1.1 +max_op_pix_clk_div_rev 0x123a v1.1 +min_op_sys_clk_freq_rev_mhz 0x123c 32 v1.1 float_ireal +max_op_sys_clk_freq_rev_mhz 0x1240 32 v1.1 float_ireal +min_op_pix_clk_freq_rev_mhz 0x1244 32 v1.1 float_ireal +max_op_pix_clk_freq_rev_mhz 0x1248 32 v1.1 float_ireal +max_bitrate_rev_d_mode_mbps 0x124c 32 v1.1 ireal +max_symrate_rev_c_mode_msps 0x1250 32 v1.1 ireal + +# image compression capability registers +compression_capability 0x1300 +- b dpcm_pcm_simple 0 + +# test mode capability registers +test_mode_capability 0x1310 16 +- b solid_color 0 +- b color_bars 1 +- b fade_to_grey 2 +- b pn9 3 +- b color_tile 5 +pn9_data_format1 0x1312 +pn9_data_format2 0x1313 +pn9_data_format3 0x1314 +pn9_data_format4 0x1315 +pn9_misc_capability 0x1316 +- f num_pixels 0 2 +- b compression 3 +test_pattern_capability 0x1317 v1.1 +- b no_repeat 1 +pattern_size_div_m1 0x1318 v1.1 + +# fifo capability registers +fifo_support_capability 0x1502 +- e none 0 +- e derating 1 +- e derating_overrating 2 + +# csi-2 capability registers +phy_ctrl_capability 0x1600 +- b auto_phy_ctl 0 +- b ui_phy_ctl 1 +- b dphy_time_ui_reg_1_ctl 2 +- b dphy_time_ui_reg_2_ctl 3 +- b dphy_time_ctl 4 +- b dphy_ext_time_ui_reg_1_ctl 5 +- b dphy_ext_time_ui_reg_2_ctl 6 +- b dphy_ext_time_ctl 7 +csi_dphy_lane_mode_capability 0x1601 +- b 1_lane 0 +- b 2_lane 1 +- b 3_lane 2 +- b 4_lane 3 +- b 5_lane 4 +- b 6_lane 5 +- b 7_lane 6 +- b 8_lane 7 +csi_signaling_mode_capability 0x1602 +- b csi_dphy 2 +- b csi_cphy 3 +fast_standby_capability 0x1603 +- e no_frame_truncation 0 +- e frame_truncation 1 +csi_address_control_capability 0x1604 +- b cci_addr_change 0 +- b 2nd_cci_addr 1 +- b sw_changeable_2nd_cci_addr 2 +data_type_capability 0x1605 +- b dpcm_programmable 0 +- b bottom_embedded_dt_programmable 1 +- b bottom_embedded_vc_programmable 2 +- b ext_vc_range 3 +csi_cphy_lane_mode_capability 0x1606 +- b 1_lane 0 +- b 2_lane 1 +- b 3_lane 2 +- b 4_lane 3 +- b 5_lane 4 +- b 6_lane 5 +- b 7_lane 6 +- b 8_lane 7 +emb_data_capability 0x1607 v1.1 +- b two_bytes_per_raw16 0 +- b two_bytes_per_raw20 1 +- b two_bytes_per_raw24 2 +- b no_one_byte_per_raw16 3 +- b no_one_byte_per_raw20 4 +- b no_one_byte_per_raw24 5 +max_per_lane_bitrate_lane_d_mode_mbps(n) 0x1608 32 ireal +- l n 0 7 4 4,0x32 +temp_sensor_capability 0x1618 +- b supported 0 +- b CCS_format 1 +- b reset_0x80 2 +max_per_lane_bitrate_lane_c_mode_mbps(n) 0x161a 32 ireal +- l n 0 7 4 4,0x30 +dphy_equalization_capability 0x162b +- b equalization_ctrl 0 +- b eq1 1 +- b eq2 2 +cphy_equalization_capability 0x162c +- b equalization_ctrl 0 +dphy_preamble_capability 0x162d +- b preamble_seq_ctrl 0 +dphy_ssc_capability 0x162e +- b supported 0 +cphy_calibration_capability 0x162f +- b manual 0 +- b manual_streaming 1 +- b format_1_ctrl 2 +- b format_2_ctrl 3 +- b format_3_ctrl 4 +dphy_calibration_capability 0x1630 +- b manual 0 +- b manual_streaming 1 +- b alternate_seq 2 +phy_ctrl_capability_2 0x1631 +- b tgr_length 0 +- b tgr_preamble_prog_seq 1 +- b extra_cphy_manual_timing 2 +- b clock_based_manual_cdphy 3 +- b clock_based_manual_dphy 4 +- b clock_based_manual_cphy 5 +- b manual_lp_dphy 6 +- b manual_lp_cphy 7 +lrte_cphy_capability 0x1632 +- b pdq_short 0 +- b spacer_short 1 +- b pdq_long 2 +- b spacer_long 3 +- b spacer_no_pdq 4 +lrte_dphy_capability 0x1633 +- b pdq_short_opt1 0 +- b spacer_short_opt1 1 +- b pdq_long_opt1 2 +- b spacer_long_opt1 3 +- b spacer_short_opt2 4 +- b spacer_long_opt2 5 +- b spacer_no_pdq_opt1 6 +- b spacer_variable_opt2 7 +alps_capability_dphy 0x1634 +- e lvlp_not_supported 0 0x3 +- e lvlp_supported 1 0x3 +- e controllable_lvlp 2 0x3 +alps_capability_cphy 0x1635 +- e lvlp_not_supported 0 0x3 +- e lvlp_supported 1 0x3 +- e controllable_lvlp 2 0x3 +- e alp_not_supported 0xc 0xc +- e alp_supported 0xd 0xc +- e controllable_alp 0xe 0xc +scrambling_capability 0x1636 +- b scrambling_supported 0 +- f max_seeds_per_lane_c 1 2 +- e 1 0 +- e 4 3 +- f num_seed_regs 3 5 +- e 0 0 +- e 1 1 +- e 4 4 +- b num_seed_per_lane 6 +dphy_manual_constant 0x1637 +cphy_manual_constant 0x1638 +CSI2_interface_capability_misc 0x1639 v1.1 +- b eotp_short_pkt_opt2 0 +PHY_ctrl_capability_3 0x165c v1.1 +- b dphy_timing_not_multiple 0 +- b dphy_min_timing_value_1 1 +- b twakeup_supported 2 +- b tinit_supported 3 +- b ths_exit_supported 4 +- b cphy_timing_not_multiple 5 +- b cphy_min_timing_value_1 6 +dphy_sf 0x165d v1.1 +cphy_sf 0x165e v1.1 +- f twakeup 0 3 +- f tinit 4 7 +dphy_limits_1 0x165f v1.1 +- f ths_prepare 0 3 +- f ths_zero 4 7 +dphy_limits_2 0x1660 v1.1 +- f ths_trail 0 3 +- f tclk_trail_min 4 7 +dphy_limits_3 0x1661 v1.1 +- f tclk_prepare 0 3 +- f tclk_zero 4 7 +dphy_limits_4 0x1662 v1.1 +- f tclk_post 0 3 +- f tlpx 4 7 +dphy_limits_5 0x1663 v1.1 +- f ths_exit 0 3 +- f twakeup 4 7 +dphy_limits_6 0x1664 v1.1 +- f tinit 0 3 +cphy_limits_1 0x1665 v1.1 +- f t3_prepare_max 0 3 +- f t3_lpx_max 4 7 +cphy_limits_2 0x1666 v1.1 +- f ths_exit_max 0 3 +- f twakeup_max 4 7 +cphy_limits_3 0x1667 v1.1 +- f tinit_max 0 3 + +# binning capability registers +min_frame_length_lines_bin 0x1700 16 +max_frame_length_lines_bin 0x1702 16 +min_line_length_pck_bin 0x1704 16 +max_line_length_pck_bin 0x1706 16 +min_line_blanking_pck_bin 0x1708 16 +fine_integration_time_min_bin 0x170a 16 +fine_integration_time_max_margin_bin 0x170c 16 +binning_capability 0x1710 +- e unsupported 0 +- e binning_then_subsampling 1 +- e subsampling_then_binning 2 +binning_weighting_capability 0x1711 +- b averaged 0 +- b summed 1 +- b bayer_corrected 2 +- b module_specific_weight 3 +binning_sub_types 0x1712 +binning_sub_type(n) 0x1713 +- l n 0 63 1 +- f row 0 3 +- f column 4 7 +binning_weighting_mono_capability 0x1771 v1.1 +- b averaged 0 +- b summed 1 +- b bayer_corrected 2 +- b module_specific_weight 3 +binning_sub_types_mono 0x1772 v1.1 +binning_sub_type_mono(n) 0x1773 v1.1 f +- l n 0 63 1 + +# data transfer interface capability registers +data_transfer_if_capability 0x1800 +- b supported 0 +- b polling 2 + +# sensor correction capability registers +shading_correction_capability 0x1900 +- b color_shading 0 +- b luminance_correction 1 +green_imbalance_capability 0x1901 +- b supported 0 +module_specific_correction_capability 0x1903 +defect_correction_capability 0x1904 16 +- b mapped_defect 0 +- b dynamic_couplet 2 +- b dynamic_single 5 +- b combined_dynamic 8 +defect_correction_capability_2 0x1906 16 +- b dynamic_triplet 3 +nf_capability 0x1908 +- b luma 0 +- b chroma 1 +- b combined 2 + +# optical black readout capability registers +ob_readout_capability 0x1980 +- b controllable_readout 0 +- b visible_pixel_readout 1 +- b different_vc_readout 2 +- b different_dt_readout 3 +- b prog_data_format 4 + +# color feedback capability registers +color_feedback_capability 0x1987 +- b kelvin 0 +- b awb_gain 1 + +# cfa pattern capability registers +CFA_pattern_capability 0x1990 v1.1 +- e bayer 0 +- e monochrome 1 +- e 4x4_quad_bayer 2 +- e vendor_specific 3 +CFA_pattern_conversion_capability 0x1991 v1.1 +- b bayer 0 + +# timer capability registers +flash_mode_capability 0x1a02 +- b single_strobe 0 +sa_strobe_mode_capability 0x1a03 +- b fixed_width 0 +- b edge_ctrl 1 + +# soft reset capability registers +reset_max_delay 0x1a10 v1.1 +reset_min_time 0x1a11 v1.1 + +# pdaf capability registers +pdaf_capability_1 0x1b80 +- b supported 0 +- b processed_bottom_embedded 1 +- b processed_interleaved 2 +- b raw_bottom_embedded 3 +- b raw_interleaved 4 +- b visible_pdaf_correction 5 +- b vc_interleaving 6 +- b dt_interleaving 7 +pdaf_capability_2 0x1b81 +- b ROI 0 +- b after_digital_crop 1 +- b ctrl_retimed 2 + +# bracketing interface capability registers +bracketing_lut_capability_1 0x1c00 +- b coarse_integration 0 +- b global_analog_gain 1 +- b flash 4 +- b global_digital_gain 5 +- b alternate_global_analog_gain 6 +bracketing_lut_capability_2 0x1c01 +- b single_bracketing_mode 0 +- b looped_bracketing_mode 1 +bracketing_lut_size 0x1c02 diff --git a/Documentation/driver-api/media/drivers/ccs/ccs.rst b/Documentation/driver-api/media/drivers/ccs/ccs.rst new file mode 100644 index 0000000000..7389204afc --- /dev/null +++ b/Documentation/driver-api/media/drivers/ccs/ccs.rst @@ -0,0 +1,117 @@ +.. SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause + +.. include:: + +MIPI CCS camera sensor driver +============================= + +The MIPI CCS camera sensor driver is a generic driver for `MIPI CCS +`_ compliant +camera sensors. It exposes three sub-devices representing the pixel array, +the binner and the scaler. + +As the capabilities of individual devices vary, the driver exposes +interfaces based on the capabilities that exist in hardware. + +Pixel Array sub-device +---------------------- + +The pixel array sub-device represents the camera sensor's pixel matrix, as well +as analogue crop functionality present in many compliant devices. The analogue +crop is configured using the ``V4L2_SEL_TGT_CROP`` on the source pad (0) of the +entity. The size of the pixel matrix can be obtained by getting the +``V4L2_SEL_TGT_NATIVE_SIZE`` target. + +Binner +------ + +The binner sub-device represents the binning functionality on the sensor. For +that purpose, selection target ``V4L2_SEL_TGT_COMPOSE`` is supported on the +sink pad (0). + +Additionally, if a device has no scaler or digital crop functionality, the +source pad (1) expses another digital crop selection rectangle that can only +crop at the end of the lines and frames. + +Scaler +------ + +The scaler sub-device represents the digital crop and scaling functionality of +the sensor. The V4L2 selection target ``V4L2_SEL_TGT_CROP`` is used to +configure the digital crop on the sink pad (0) when digital crop is supported. +Scaling is configured using selection target ``V4L2_SEL_TGT_COMPOSE`` on the +sink pad (0) as well. + +Additionally, if the scaler sub-device exists, its source pad (1) exposes +another digital crop selection rectangle that can only crop at the end of the +lines and frames. + +Digital and analogue crop +------------------------- + +Digital crop functionality is referred to as cropping that effectively works by +dropping some data on the floor. Analogue crop, on the other hand, means that +the cropped information is never retrieved. In case of camera sensors, the +analogue data is never read from the pixel matrix that are outside the +configured selection rectangle that designates crop. The difference has an +effect in device timing and likely also in power consumption. + +CCS static data +--------------- + +The MIPI CCS driver supports CCS static data for all compliant devices, +including not just those compliant with CCS 1.1 but also CCS 1.0 and SMIA(++). +For CCS the file names are formed as + + ccs/ccs-sensor-vvvv-mmmm-rrrr.fw (sensor) and + ccs/ccs-module-vvvv-mmmm-rrrr.fw (module). + +For SMIA++ compliant devices the corresponding file names are + + ccs/smiapp-sensor-vv-mmmm-rr.fw (sensor) and + ccs/smiapp-module-vv-mmmm-rrrr.fw (module). + +For SMIA (non-++) compliant devices the static data file name is + + ccs/smia-sensor-vv-mmmm-rr.fw (sensor). + +vvvv or vv denotes MIPI and SMIA manufacturer IDs respectively, mmmm model ID +and rrrr or rr revision number. + +Register definition generator +----------------------------- + +The ccs-regs.asc file contains MIPI CCS register definitions that are used +to produce C source code files for definitions that can be better used by +programs written in C language. As there are many dependencies between the +produced files, please do not modify them manually as it's error-prone and +in vain, but instead change the script producing them. + +Usage +~~~~~ + +Conventionally the script is called this way to update the CCS driver +definitions: + +.. code-block:: none + + $ Documentation/driver-api/media/drivers/ccs/mk-ccs-regs -k \ + -e drivers/media/i2c/ccs/ccs-regs.h \ + -L drivers/media/i2c/ccs/ccs-limits.h \ + -l drivers/media/i2c/ccs/ccs-limits.c \ + -c Documentation/driver-api/media/drivers/ccs/ccs-regs.asc + +CCS PLL calculator +================== + +The CCS PLL calculator is used to compute the PLL configuration, given sensor's +capabilities as well as board configuration and user specified configuration. As +the configuration space that encompasses all these configurations is vast, the +PLL calculator isn't entirely trivial. Yet it is relatively simple to use for a +driver. + +The PLL model implemented by the PLL calculator corresponds to MIPI CCS 1.1. + +.. kernel-doc:: drivers/media/i2c/ccs-pll.h + +**Copyright** |copy| 2020 Intel Corporation diff --git a/Documentation/driver-api/media/drivers/ccs/mk-ccs-regs b/Documentation/driver-api/media/drivers/ccs/mk-ccs-regs new file mode 100755 index 0000000000..2a4edc7e05 --- /dev/null +++ b/Documentation/driver-api/media/drivers/ccs/mk-ccs-regs @@ -0,0 +1,434 @@ +#!/usr/bin/perl -w +# SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause +# Copyright (C) 2019--2020 Intel Corporation + +use Getopt::Long qw(:config no_ignore_case); +use File::Basename; + +my $ccsregs = "ccs-regs.asc"; +my $header; +my $regarray; +my $limitc; +my $limith; +my $kernel; +my $help; + +GetOptions("ccsregs|c=s" => \$ccsregs, + "header|e=s" => \$header, + "regarray|r=s" => \$regarray, + "limitc|l=s" => \$limitc, + "limith|L=s" => \$limith, + "kernel|k" => \$kernel, + "help|h" => \$help) or die "can't parse options"; + +$help = 1 if ! defined $header || ! defined $limitc || ! defined $limith; + +if (defined $help) { + print <\n#include \n"; +my $uint32_t = ! defined $kernel ? 'uint32_t' : 'u32'; +my $uint16_t = ! defined $kernel ? 'uint16_t' : 'u16'; + +open(my $R, "< $ccsregs") or die "can't open $ccsregs"; + +open(my $H, "> $header") or die "can't open $header"; +my $A; +if (defined $regarray) { + open($A, "> $regarray") or die "can't open $regarray"; +} +open(my $LC, "> $limitc") or die "can't open $limitc"; +open(my $LH, "> $limith") or die "can't open $limith"; + +my %this; + +sub is_limit_reg($) { + my $addr = hex $_[0]; + + return 0 if $addr < 0x40; # weed out status registers + return 0 if $addr >= 0x100 && $addr < 0xfff; # weed out configuration registers + + return 1; +} + +my $uc_header = basename uc $header; +$uc_header =~ s/[^A-Z0-9]/_/g; + +my $copyright = "/* Copyright (C) 2019--2020 Intel Corporation */\n"; +my $license = "SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause"; +my $note = "/*\n * Generated by $0;\n * do not modify.\n */\n"; + +for my $fh ($A, $LC) { + print $fh "// $license\n$copyright$note\n" if defined $fh; +} + +for my $fh ($H, $LH) { + print $fh "/* $license */\n$copyright$note\n"; +} + +sub bit_def($) { + my $bit = shift @_; + + return "BIT($bit)" if defined $kernel; + return "(1U << $bit)" if $bit =~ /^[a-zA-Z0-9_]+$/; + return "(1U << ($bit))"; +} + +print $H <\n\n" if defined $kernel; + +print $H < +#include +#include "ccs-extra.h" +#include "ccs-regs.h" + +EOF + if defined $A; + +my $uc_limith = basename uc $limith; +$uc_limith =~ s/[^A-Z0-9]/_/g; + +print $LH <{elsize}; + my $h = $this->{argparams}; + + foreach my $arg (@{$this->{args}}) { + my $apref = $h->{$arg}; + + $size *= $apref->{max} - $apref->{min} + 1; + } + + return $size; +} + +sub print_args($$$) { + my ($this, $postfix, $is_same_reg) = @_; + my ($args, $argparams, $name) = + ($this->{args}, $this->{argparams}, $this->{name}); + my $varname = "ccs_reg_arg_" . (lc $name) . $postfix; + my @mins; + my @sorted_args = @{$this->{sorted_args}}; + my $lim_arg; + my $size = arr_size($this); + + $argdescs .= "static const struct ccs_reg_arg " . $varname . "[] = {\n"; + + foreach my $sorted_arg (@sorted_args) { + push @mins, $argparams->{$sorted_arg}->{min}; + } + + foreach my $sorted_arg (@sorted_args) { + my $h = $argparams->{$sorted_arg}; + + $argdescs .= "\t{ \"$sorted_arg\", $h->{min}, $h->{max}, $h->{elsize} },\n"; + + $lim_arg .= defined $lim_arg ? ", $h->{min}" : "$h->{min}"; + } + + $argdescs .= "};\n\n"; + + $reglist .= "\t{ CCS_R_" . (uc $name) . "(" . (join ",", (@mins)) . + "), $size, sizeof($varname) / sizeof(*$varname)," . + " \"" . (lc $name) . "\", $varname },\n"; + + print $LC tabconv sprintf "\t{ CCS_R_" . (uc $name) . "($lim_arg), " . + $size . ", " . ($is_same_reg ? "CCS_L_FL_SAME_REG" : "0") . + ", \"$name" . (defined $this->{discontig} ? " $lim_arg" : "") . "\" },\n" + if is_limit_reg $this->{base_addr}; +} + +my $hdr_data; + +while (<$R>) { + chop; + s/^\s*//; + next if /^[#;]/ || /^$/; + if (s/^-\s*//) { + if (s/^b\s*//) { + my ($bit, $addr) = split /\t+/; + $bit = uc $bit; + $hdr_data .= sprintf "#define %-62s %s", "CCS_" . (uc ${this{name}}) ."_$bit", bit_def($addr) . "\n"; + } elsif (s/^f\s*//) { + s/[,\.-]/_/g; + my @a = split /\s+/; + my ($msb, $lsb, $this_field) = reverse @a; + @a = ( { "name" => "SHIFT", "addr" => $lsb, "fmt" => "%uU", }, + { "name" => "MASK", "addr" => (1 << ($msb + 1)) - 1 - ((1 << $lsb) - 1), "fmt" => "0x%" . join(".", ($this{"elsize"} >> 2) x 2) . "x" } ); + $this{"field"} = $this_field; + foreach my $ar (@a) { + #print $ar->{fmt}."\n"; + $hdr_data .= sprintf "#define %-62s " . $ar->{"fmt"} . "\n", "CCS_" . (uc $this{"name"}) . (defined $this_field ? "_" . uc $this_field : "") . "_" . $ar->{"name"}, $ar->{"addr"} . "\n"; + } + } elsif (s/^e\s*//) { + s/[,\.-]/_/g; + my ($enum, $addr) = split /\s+/; + $enum = uc $enum; + $hdr_data .= sprintf "#define %-62s %s", "CCS_" . (uc ${this{name}}) . (defined $this{"field"} ? "_" . uc $this{"field"} : "") ."_$enum", $addr . ($addr =~ /0x/i ? "" : "U") . "\n"; + } elsif (s/^l\s*//) { + my ($arg, $min, $max, $elsize, @discontig) = split /\s+/; + my $size; + + foreach my $num ($min, $max) { + $num = hex $num if $num =~ /0x/i; + } + + $hdr_data .= sprintf "#define %-62s %s", "CCS_LIM_" . (uc ${this{name}} . "_MIN_$arg"), $min . ($min =~ /0x/i ? "" : "U") . "\n"; + $hdr_data .= sprintf "#define %-62s %s", "CCS_LIM_" . (uc ${this{name}} . "_MAX_$arg"), $max . ($max =~ /0x/i ? "" : "U") . "\n"; + + my $h = $this{argparams}; + + $h->{$arg} = { "min" => $min, + "max" => $max, + "elsize" => $elsize =~ /^0x/ ? hex $elsize : $elsize, + "discontig" => \@discontig }; + + $this{discontig} = $arg if @discontig; + + next if $#{$this{args}} + 1 != scalar keys %{$this{argparams}}; + + my $reg_formula = "($this{addr}"; + my $lim_formula; + + foreach my $arg (@{$this{args}}) { + my $d = $h->{$arg}->{discontig}; + my $times = $h->{$arg}->{elsize} != 1 ? + " * " . $h->{$arg}->{elsize} : ""; + + if (@$d) { + my ($lim, $offset) = split /,/, $d->[0]; + + $reg_formula .= " + (($arg) < $lim ? ($arg)$times : $offset + (($arg) - $lim)$times)"; + } else { + $reg_formula .= " + ($arg)$times"; + } + + $lim_formula .= (defined $lim_formula ? " + " : "") . "($arg)$times"; + } + + $reg_formula .= ")\n"; + $lim_formula =~ s/^\(([a-z0-9]+)\)$/$1/i; + + print $H tabconv sprintf("#define %-62s %s", "CCS_R_" . (uc $this{name}) . + $this{arglist}, $reg_formula); + + print $H tabconv $hdr_data; + undef $hdr_data; + + # Sort arguments in descending order by size + @{$this{sorted_args}} = sort { + $h->{$a}->{elsize} <= $h->{$b}->{elsize} + } @{$this{args}}; + + if (defined $this{discontig}) { + my $da = $this{argparams}->{$this{discontig}}; + my ($first_discontig) = split /,/, $da->{discontig}->[0]; + my $max = $da->{max}; + + $da->{max} = $first_discontig - 1; + print_args(\%this, "", 0); + + $da->{min} = $da->{max} + 1; + $da->{max} = $max; + print_args(\%this, $first_discontig, 1); + } else { + print_args(\%this, "", 0); + } + + next unless is_limit_reg $this{base_addr}; + + print $LH tabconv sprintf "#define %-63s%s\n", + "CCS_L_" . (uc $this{name}) . "_OFFSET(" . + (join ", ", @{$this{args}}) . ")", "($lim_formula)"; + } + + if (! @{$this{args}}) { + print $H tabconv($hdr_data); + undef $hdr_data; + } + + next; + } + + my ($name, $addr, @flags) = split /\t+/, $_; + my $args = []; + + my $sp; + + ($name, $addr, $args) = name_split($name, $addr) if /\(.*\)/; + + $name =~ s/[,\.-]/_/g; + + my $flagstring = ""; + my $size = elem_size(@flags); + $flagstring .= "| CCS_FL_16BIT " if $size eq "2"; + $flagstring .= "| CCS_FL_32BIT " if $size eq "4"; + $flagstring .= "| CCS_FL_FLOAT_IREAL " if grep /^float_ireal$/, @flags; + $flagstring .= "| CCS_FL_IREAL " if grep /^ireal$/, @flags; + $flagstring =~ s/^\| //; + $flagstring =~ s/ $//; + $flagstring = "($flagstring)" if $flagstring =~ /\|/; + my $base_addr = $addr; + $addr = "($addr | $flagstring)" if $flagstring ne ""; + + my $arglist = @$args ? "(" . (join ", ", @$args) . ")" : ""; + $hdr_data .= sprintf "#define %-62s %s\n", "CCS_R_" . (uc $name), $addr + if !@$args; + + $name =~ s/\(.*//; + + %this = ( name => $name, + addr => $addr, + base_addr => $base_addr, + argparams => {}, + args => $args, + arglist => $arglist, + elsize => $size, + ); + + if (!@$args) { + $reglist .= "\t{ CCS_R_" . (uc $name) . ", 1, 0, \"" . (lc $name) . "\", NULL },\n"; + print $H tabconv $hdr_data; + undef $hdr_data; + + print $LC tabconv sprintf "\t{ CCS_R_" . (uc $name) . ", " . + $this{elsize} . ", 0, \"$name\" },\n" + if is_limit_reg $this{base_addr}; + } + + print $LH tabconv sprintf "#define %-63s%s\n", + "CCS_L_" . (uc $this{name}), $limitcount++ + if is_limit_reg $this{base_addr}; +} + +if (defined $A) { + print $A $argdescs, $reglist; + + print $A "\t{ 0 }\n"; + + print $A "};\n"; +} + +print $H "\n#endif /* __${uc_header}__ */\n"; + +print $LH tabconv sprintf "#define %-63s%s\n", "CCS_L_LAST", $limitcount; + +print $LH "\n#endif /* __${uc_limith}__ */\n"; + +print $LC "\t{ 0 } /* Guardian */\n"; +print $LC "};\n"; + +close($R); +close($H); +close($A) if defined $A; +close($LC); +close($LH); diff --git a/Documentation/driver-api/media/drivers/contributors.rst b/Documentation/driver-api/media/drivers/contributors.rst new file mode 100644 index 0000000000..f23b6e6faf --- /dev/null +++ b/Documentation/driver-api/media/drivers/contributors.rst @@ -0,0 +1,131 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Contributors +============ + +.. note:: + + This documentation is outdated. There are several other DVB contributors + that aren't listed below. + +Thanks go to the following people for patches and contributions: + +- Michael Hunold + + - for the initial saa7146 driver and its recent overhaul + +- Christian Theiss + + - for his work on the initial Linux DVB driver + +- Marcus Metzler and + Ralph Metzler + + - for their continuing work on the DVB driver + +- Michael Holzt + + - for his contributions to the dvb-net driver + +- Diego Picciani + + - for CyberLogin for Linux which allows logging onto EON + (in case you are wondering where CyberLogin is, EON changed its login + procedure and CyberLogin is no longer used.) + +- Martin Schaller + + - for patching the cable card decoder driver + +- Klaus Schmidinger + + - for various fixes regarding tuning, OSD and CI stuff and his work on VDR + +- Steve Brown + + - for his AFC kernel thread + +- Christoph Martin + + - for his LIRC infrared handler + +- Andreas Oberritter , + Dennis Noermann , + Felix Domke , + Florian Schirmer , + Ronny Strutz <3des@elitedvb.de>, + Wolfram Joost + and all the other dbox2 people + + - for many bugfixes in the generic DVB Core, frontend drivers and + their work on the dbox2 port of the DVB driver + +- Oliver Endriss + + - for many bugfixes + +- Andrew de Quincey + + - for the tda1004x frontend driver, and various bugfixes + +- Peter Schildmann + + - for the driver for the Technisat SkyStar2 PCI DVB card + +- Vadim Catana , + Roberto Ragusa and + Augusto Cardoso + + - for all the work for the FlexCopII chipset by B2C2,Inc. + +- Davor Emard + + - for his work on the budget drivers, the demux code, + the module unloading problems, ... + +- Hans-Frieder Vogt + + - for his work on calculating and checking the crc's for the + TechnoTrend/Hauppauge DEC driver firmware + +- Michael Dreher and + Andreas 'randy' Weinberger + + - for the support of the Fujitsu-Siemens Activy budget DVB-S + +- Kenneth Aafløy + + - for adding support for Typhoon DVB-S budget card + +- Ernst Peinlich + + - for tuning/DiSEqC support for the DEC 3000-s + +- Peter Beutner + + - for the IR code for the ttusb-dec driver + +- Wilson Michaels + + - for the lgdt330x frontend driver, and various bugfixes + +- Michael Krufky + + - for maintaining v4l/dvb inter-tree dependencies + +- Taylor Jacob + + - for the nxt2002 frontend driver + +- Jean-Francois Thibert + + - for the nxt2004 frontend driver + +- Kirk Lapray + + - for the or51211 and or51132 frontend drivers, and + for merging the nxt2002 and nxt2004 modules into a + single nxt200x frontend driver. + +(If you think you should be in this list, but you are not, drop a +line to the DVB mailing list) diff --git a/Documentation/driver-api/media/drivers/cx2341x-devel.rst b/Documentation/driver-api/media/drivers/cx2341x-devel.rst new file mode 100644 index 0000000000..97699df6ea --- /dev/null +++ b/Documentation/driver-api/media/drivers/cx2341x-devel.rst @@ -0,0 +1,3685 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The cx2341x driver +================== + +Memory at cx2341x chips +----------------------- + +This section describes the cx2341x memory map and documents some of the +register space. + +.. note:: the memory long words are little-endian ('intel format'). + +.. warning:: + + This information was figured out from searching through the memory + and registers, this information may not be correct and is certainly + not complete, and was not derived from anything more than searching + through the memory space with commands like: + + .. code-block:: none + + ivtvctl -O min=0x02000000,max=0x020000ff + + So take this as is, I'm always searching for more stuff, it's a large + register space :-). + +Memory Map +~~~~~~~~~~ + +The cx2341x exposes its entire 64M memory space to the PCI host via the PCI BAR0 +(Base Address Register 0). The addresses here are offsets relative to the +address held in BAR0. + +.. code-block:: none + + 0x00000000-0x00ffffff Encoder memory space + 0x00000000-0x0003ffff Encode.rom + ???-??? MPEG buffer(s) + ???-??? Raw video capture buffer(s) + ???-??? Raw audio capture buffer(s) + ???-??? Display buffers (6 or 9) + + 0x01000000-0x01ffffff Decoder memory space + 0x01000000-0x0103ffff Decode.rom + ???-??? MPEG buffers(s) + 0x0114b000-0x0115afff Audio.rom (deprecated?) + + 0x02000000-0x0200ffff Register Space + +Registers +~~~~~~~~~ + +The registers occupy the 64k space starting at the 0x02000000 offset from BAR0. +All of these registers are 32 bits wide. + +.. code-block:: none + + DMA Registers 0x000-0xff: + + 0x00 - Control: + 0=reset/cancel, 1=read, 2=write, 4=stop + 0x04 - DMA status: + 1=read busy, 2=write busy, 4=read error, 8=write error, 16=link list error + 0x08 - pci DMA pointer for read link list + 0x0c - pci DMA pointer for write link list + 0x10 - read/write DMA enable: + 1=read enable, 2=write enable + 0x14 - always 0xffffffff, if set any lower instability occurs, 0x00 crashes + 0x18 - ?? + 0x1c - always 0x20 or 32, smaller values slow down DMA transactions + 0x20 - always value of 0x780a010a + 0x24-0x3c - usually just random values??? + 0x40 - Interrupt status + 0x44 - Write a bit here and shows up in Interrupt status 0x40 + 0x48 - Interrupt Mask + 0x4C - always value of 0xfffdffff, + if changed to 0xffffffff DMA write interrupts break. + 0x50 - always 0xffffffff + 0x54 - always 0xffffffff (0x4c, 0x50, 0x54 seem like interrupt masks, are + 3 processors on chip, Java ones, VPU, SPU, APU, maybe these are the + interrupt masks???). + 0x60-0x7C - random values + 0x80 - first write linked list reg, for Encoder Memory addr + 0x84 - first write linked list reg, for pci memory addr + 0x88 - first write linked list reg, for length of buffer in memory addr + (|0x80000000 or this for last link) + 0x8c-0xdc - rest of write linked list reg, 8 sets of 3 total, DMA goes here + from linked list addr in reg 0x0c, firmware must push through or + something. + 0xe0 - first (and only) read linked list reg, for pci memory addr + 0xe4 - first (and only) read linked list reg, for Decoder memory addr + 0xe8 - first (and only) read linked list reg, for length of buffer + 0xec-0xff - Nothing seems to be in these registers, 0xec-f4 are 0x00000000. + +Memory locations for Encoder Buffers 0x700-0x7ff: + +These registers show offsets of memory locations pertaining to each +buffer area used for encoding, have to shift them by <<1 first. + +- 0x07F8: Encoder SDRAM refresh +- 0x07FC: Encoder SDRAM pre-charge + +Memory locations for Decoder Buffers 0x800-0x8ff: + +These registers show offsets of memory locations pertaining to each +buffer area used for decoding, have to shift them by <<1 first. + +- 0x08F8: Decoder SDRAM refresh +- 0x08FC: Decoder SDRAM pre-charge + +Other memory locations: + +- 0x2800: Video Display Module control +- 0x2D00: AO (audio output?) control +- 0x2D24: Bytes Flushed +- 0x7000: LSB I2C write clock bit (inverted) +- 0x7004: LSB I2C write data bit (inverted) +- 0x7008: LSB I2C read clock bit +- 0x700c: LSB I2C read data bit +- 0x9008: GPIO get input state +- 0x900c: GPIO set output state +- 0x9020: GPIO direction (Bit7 (GPIO 0..7) - 0:input, 1:output) +- 0x9050: SPU control +- 0x9054: Reset HW blocks +- 0x9058: VPU control +- 0xA018: Bit6: interrupt pending? +- 0xA064: APU command + + +Interrupt Status Register +~~~~~~~~~~~~~~~~~~~~~~~~~ + +The definition of the bits in the interrupt status register 0x0040, and the +interrupt mask 0x0048. If a bit is cleared in the mask, then we want our ISR to +execute. + +- bit 31 Encoder Start Capture +- bit 30 Encoder EOS +- bit 29 Encoder VBI capture +- bit 28 Encoder Video Input Module reset event +- bit 27 Encoder DMA complete +- bit 24 Decoder audio mode change detection event (through event notification) +- bit 22 Decoder data request +- bit 20 Decoder DMA complete +- bit 19 Decoder VBI re-insertion +- bit 18 Decoder DMA err (linked-list bad) + +Missing documentation +--------------------- + +- Encoder API post(?) +- Decoder API post(?) +- Decoder VTRACE event + + +The cx2341x firmware upload +--------------------------- + +This document describes how to upload the cx2341x firmware to the card. + +How to find +~~~~~~~~~~~ + +See the web pages of the various projects that uses this chip for information +on how to obtain the firmware. + +The firmware stored in a Windows driver can be detected as follows: + +- Each firmware image is 256k bytes. +- The 1st 32-bit word of the Encoder image is 0x0000da7 +- The 1st 32-bit word of the Decoder image is 0x00003a7 +- The 2nd 32-bit word of both images is 0xaa55bb66 + +How to load +~~~~~~~~~~~ + +- Issue the FWapi command to stop the encoder if it is running. Wait for the + command to complete. +- Issue the FWapi command to stop the decoder if it is running. Wait for the + command to complete. +- Issue the I2C command to the digitizer to stop emitting VSYNC events. +- Issue the FWapi command to halt the encoder's firmware. +- Sleep for 10ms. +- Issue the FWapi command to halt the decoder's firmware. +- Sleep for 10ms. +- Write 0x00000000 to register 0x2800 to stop the Video Display Module. +- Write 0x00000005 to register 0x2D00 to stop the AO (audio output?). +- Write 0x00000000 to register 0xA064 to ping? the APU. +- Write 0xFFFFFFFE to register 0x9058 to stop the VPU. +- Write 0xFFFFFFFF to register 0x9054 to reset the HW blocks. +- Write 0x00000001 to register 0x9050 to stop the SPU. +- Sleep for 10ms. +- Write 0x0000001A to register 0x07FC to init the Encoder SDRAM's pre-charge. +- Write 0x80000640 to register 0x07F8 to init the Encoder SDRAM's refresh to 1us. +- Write 0x0000001A to register 0x08FC to init the Decoder SDRAM's pre-charge. +- Write 0x80000640 to register 0x08F8 to init the Decoder SDRAM's refresh to 1us. +- Sleep for 512ms. (600ms is recommended) +- Transfer the encoder's firmware image to offset 0 in Encoder memory space. +- Transfer the decoder's firmware image to offset 0 in Decoder memory space. +- Use a read-modify-write operation to Clear bit 0 of register 0x9050 to + re-enable the SPU. +- Sleep for 1 second. +- Use a read-modify-write operation to Clear bits 3 and 0 of register 0x9058 + to re-enable the VPU. +- Sleep for 1 second. +- Issue status API commands to both firmware images to verify. + + +How to call the firmware API +---------------------------- + +The preferred calling convention is known as the firmware mailbox. The +mailboxes are basically a fixed length array that serves as the call-stack. + +Firmware mailboxes can be located by searching the encoder and decoder memory +for a 16 byte signature. That signature will be located on a 256-byte boundary. + +Signature: + +.. code-block:: none + + 0x78, 0x56, 0x34, 0x12, 0x12, 0x78, 0x56, 0x34, + 0x34, 0x12, 0x78, 0x56, 0x56, 0x34, 0x12, 0x78 + +The firmware implements 20 mailboxes of 20 32-bit words. The first 10 are +reserved for API calls. The second 10 are used by the firmware for event +notification. + + ====== ================= + Index Name + ====== ================= + 0 Flags + 1 Command + 2 Return value + 3 Timeout + 4-19 Parameter/Result + ====== ================= + + +The flags are defined in the following table. The direction is from the +perspective of the firmware. + + ==== ========== ============================================ + Bit Direction Purpose + ==== ========== ============================================ + 2 O Firmware has processed the command. + 1 I Driver has finished setting the parameters. + 0 I Driver is using this mailbox. + ==== ========== ============================================ + +The command is a 32-bit enumerator. The API specifics may be found in this +chapter. + +The return value is a 32-bit enumerator. Only two values are currently defined: + +- 0=success +- -1=command undefined. + +There are 16 parameters/results 32-bit fields. The driver populates these fields +with values for all the parameters required by the call. The driver overwrites +these fields with result values returned by the call. + +The timeout value protects the card from a hung driver thread. If the driver +doesn't handle the completed call within the timeout specified, the firmware +will reset that mailbox. + +To make an API call, the driver iterates over each mailbox looking for the +first one available (bit 0 has been cleared). The driver sets that bit, fills +in the command enumerator, the timeout value and any required parameters. The +driver then sets the parameter ready bit (bit 1). The firmware scans the +mailboxes for pending commands, processes them, sets the result code, populates +the result value array with that call's return values and sets the call +complete bit (bit 2). Once bit 2 is set, the driver should retrieve the results +and clear all the flags. If the driver does not perform this task within the +time set in the timeout register, the firmware will reset that mailbox. + +Event notifications are sent from the firmware to the host. The host tells the +firmware which events it is interested in via an API call. That call tells the +firmware which notification mailbox to use. The firmware signals the host via +an interrupt. Only the 16 Results fields are used, the Flags, Command, Return +value and Timeout words are not used. + + +OSD firmware API description +---------------------------- + +.. note:: this API is part of the decoder firmware, so it's cx23415 only. + + + +CX2341X_OSD_GET_FRAMEBUFFER +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 65/0x41 + +Description +^^^^^^^^^^^ + +Return base and length of contiguous OSD memory. + +Result[0] +^^^^^^^^^ + +OSD base address + +Result[1] +^^^^^^^^^ + +OSD length + + + +CX2341X_OSD_GET_PIXEL_FORMAT +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 66/0x42 + +Description +^^^^^^^^^^^ + +Query OSD format + +Result[0] +^^^^^^^^^ + +0=8bit index +1=16bit RGB 5:6:5 +2=16bit ARGB 1:5:5:5 +3=16bit ARGB 1:4:4:4 +4=32bit ARGB 8:8:8:8 + + + +CX2341X_OSD_SET_PIXEL_FORMAT +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 67/0x43 + +Description +^^^^^^^^^^^ + +Assign pixel format + +Param[0] +^^^^^^^^ + +- 0=8bit index +- 1=16bit RGB 5:6:5 +- 2=16bit ARGB 1:5:5:5 +- 3=16bit ARGB 1:4:4:4 +- 4=32bit ARGB 8:8:8:8 + + + +CX2341X_OSD_GET_STATE +~~~~~~~~~~~~~~~~~~~~~ + +Enum: 68/0x44 + +Description +^^^^^^^^^^^ + +Query OSD state + +Result[0] +^^^^^^^^^ + +- Bit 0 0=off, 1=on +- Bits 1:2 alpha control +- Bits 3:5 pixel format + + + +CX2341X_OSD_SET_STATE +~~~~~~~~~~~~~~~~~~~~~ + +Enum: 69/0x45 + +Description +^^^^^^^^^^^ + +OSD switch + +Param[0] +^^^^^^^^ + +0=off, 1=on + + + +CX2341X_OSD_GET_OSD_COORDS +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 70/0x46 + +Description +^^^^^^^^^^^ + +Retrieve coordinates of OSD area blended with video + +Result[0] +^^^^^^^^^ + +OSD buffer address + +Result[1] +^^^^^^^^^ + +Stride in pixels + +Result[2] +^^^^^^^^^ + +Lines in OSD buffer + +Result[3] +^^^^^^^^^ + +Horizontal offset in buffer + +Result[4] +^^^^^^^^^ + +Vertical offset in buffer + + + +CX2341X_OSD_SET_OSD_COORDS +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 71/0x47 + +Description +^^^^^^^^^^^ + +Assign the coordinates of the OSD area to blend with video + +Param[0] +^^^^^^^^ + +buffer address + +Param[1] +^^^^^^^^ + +buffer stride in pixels + +Param[2] +^^^^^^^^ + +lines in buffer + +Param[3] +^^^^^^^^ + +horizontal offset + +Param[4] +^^^^^^^^ + +vertical offset + + + +CX2341X_OSD_GET_SCREEN_COORDS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 72/0x48 + +Description +^^^^^^^^^^^ + +Retrieve OSD screen area coordinates + +Result[0] +^^^^^^^^^ + +top left horizontal offset + +Result[1] +^^^^^^^^^ + +top left vertical offset + +Result[2] +^^^^^^^^^ + +bottom right horizontal offset + +Result[3] +^^^^^^^^^ + +bottom right vertical offset + + + +CX2341X_OSD_SET_SCREEN_COORDS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 73/0x49 + +Description +^^^^^^^^^^^ + +Assign the coordinates of the screen area to blend with video + +Param[0] +^^^^^^^^ + +top left horizontal offset + +Param[1] +^^^^^^^^ + +top left vertical offset + +Param[2] +^^^^^^^^ + +bottom left horizontal offset + +Param[3] +^^^^^^^^ + +bottom left vertical offset + + + +CX2341X_OSD_GET_GLOBAL_ALPHA +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 74/0x4A + +Description +^^^^^^^^^^^ + +Retrieve OSD global alpha + +Result[0] +^^^^^^^^^ + +global alpha: 0=off, 1=on + +Result[1] +^^^^^^^^^ + +bits 0:7 global alpha + + + +CX2341X_OSD_SET_GLOBAL_ALPHA +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 75/0x4B + +Description +^^^^^^^^^^^ + +Update global alpha + +Param[0] +^^^^^^^^ + +global alpha: 0=off, 1=on + +Param[1] +^^^^^^^^ + +global alpha (8 bits) + +Param[2] +^^^^^^^^ + +local alpha: 0=on, 1=off + + + +CX2341X_OSD_SET_BLEND_COORDS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 78/0x4C + +Description +^^^^^^^^^^^ + +Move start of blending area within display buffer + +Param[0] +^^^^^^^^ + +horizontal offset in buffer + +Param[1] +^^^^^^^^ + +vertical offset in buffer + + + +CX2341X_OSD_GET_FLICKER_STATE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 79/0x4F + +Description +^^^^^^^^^^^ + +Retrieve flicker reduction module state + +Result[0] +^^^^^^^^^ + +flicker state: 0=off, 1=on + + + +CX2341X_OSD_SET_FLICKER_STATE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 80/0x50 + +Description +^^^^^^^^^^^ + +Set flicker reduction module state + +Param[0] +^^^^^^^^ + +State: 0=off, 1=on + + + +CX2341X_OSD_BLT_COPY +~~~~~~~~~~~~~~~~~~~~ + +Enum: 82/0x52 + +Description +^^^^^^^^^^^ + +BLT copy + +Param[0] +^^^^^^^^ + +.. code-block:: none + + '0000' zero + '0001' ~destination AND ~source + '0010' ~destination AND source + '0011' ~destination + '0100' destination AND ~source + '0101' ~source + '0110' destination XOR source + '0111' ~destination OR ~source + '1000' ~destination AND ~source + '1001' destination XNOR source + '1010' source + '1011' ~destination OR source + '1100' destination + '1101' destination OR ~source + '1110' destination OR source + '1111' one + + +Param[1] +^^^^^^^^ + +Resulting alpha blending + +- '01' source_alpha +- '10' destination_alpha +- '11' source_alpha*destination_alpha+1 + (zero if both source and destination alpha are zero) + +Param[2] +^^^^^^^^ + +.. code-block:: none + + '00' output_pixel = source_pixel + + '01' if source_alpha=0: + output_pixel = destination_pixel + if 256 > source_alpha > 1: + output_pixel = ((source_alpha + 1)*source_pixel + + (255 - source_alpha)*destination_pixel)/256 + + '10' if destination_alpha=0: + output_pixel = source_pixel + if 255 > destination_alpha > 0: + output_pixel = ((255 - destination_alpha)*source_pixel + + (destination_alpha + 1)*destination_pixel)/256 + + '11' if source_alpha=0: + source_temp = 0 + if source_alpha=255: + source_temp = source_pixel*256 + if 255 > source_alpha > 0: + source_temp = source_pixel*(source_alpha + 1) + if destination_alpha=0: + destination_temp = 0 + if destination_alpha=255: + destination_temp = destination_pixel*256 + if 255 > destination_alpha > 0: + destination_temp = destination_pixel*(destination_alpha + 1) + output_pixel = (source_temp + destination_temp)/256 + +Param[3] +^^^^^^^^ + +width + +Param[4] +^^^^^^^^ + +height + +Param[5] +^^^^^^^^ + +destination pixel mask + +Param[6] +^^^^^^^^ + +destination rectangle start address + +Param[7] +^^^^^^^^ + +destination stride in dwords + +Param[8] +^^^^^^^^ + +source stride in dwords + +Param[9] +^^^^^^^^ + +source rectangle start address + + + +CX2341X_OSD_BLT_FILL +~~~~~~~~~~~~~~~~~~~~ + +Enum: 83/0x53 + +Description +^^^^^^^^^^^ + +BLT fill color + +Param[0] +^^^^^^^^ + +Same as Param[0] on API 0x52 + +Param[1] +^^^^^^^^ + +Same as Param[1] on API 0x52 + +Param[2] +^^^^^^^^ + +Same as Param[2] on API 0x52 + +Param[3] +^^^^^^^^ + +width + +Param[4] +^^^^^^^^ + +height + +Param[5] +^^^^^^^^ + +destination pixel mask + +Param[6] +^^^^^^^^ + +destination rectangle start address + +Param[7] +^^^^^^^^ + +destination stride in dwords + +Param[8] +^^^^^^^^ + +color fill value + + + +CX2341X_OSD_BLT_TEXT +~~~~~~~~~~~~~~~~~~~~ + +Enum: 84/0x54 + +Description +^^^^^^^^^^^ + +BLT for 8 bit alpha text source + +Param[0] +^^^^^^^^ + +Same as Param[0] on API 0x52 + +Param[1] +^^^^^^^^ + +Same as Param[1] on API 0x52 + +Param[2] +^^^^^^^^ + +Same as Param[2] on API 0x52 + +Param[3] +^^^^^^^^ + +width + +Param[4] +^^^^^^^^ + +height + +Param[5] +^^^^^^^^ + +destination pixel mask + +Param[6] +^^^^^^^^ + +destination rectangle start address + +Param[7] +^^^^^^^^ + +destination stride in dwords + +Param[8] +^^^^^^^^ + +source stride in dwords + +Param[9] +^^^^^^^^ + +source rectangle start address + +Param[10] +^^^^^^^^^ + +color fill value + + + +CX2341X_OSD_SET_FRAMEBUFFER_WINDOW +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 86/0x56 + +Description +^^^^^^^^^^^ + +Positions the main output window on the screen. The coordinates must be +such that the entire window fits on the screen. + +Param[0] +^^^^^^^^ + +window width + +Param[1] +^^^^^^^^ + +window height + +Param[2] +^^^^^^^^ + +top left window corner horizontal offset + +Param[3] +^^^^^^^^ + +top left window corner vertical offset + + + +CX2341X_OSD_SET_CHROMA_KEY +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 96/0x60 + +Description +^^^^^^^^^^^ + +Chroma key switch and color + +Param[0] +^^^^^^^^ + +state: 0=off, 1=on + +Param[1] +^^^^^^^^ + +color + + + +CX2341X_OSD_GET_ALPHA_CONTENT_INDEX +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 97/0x61 + +Description +^^^^^^^^^^^ + +Retrieve alpha content index + +Result[0] +^^^^^^^^^ + +alpha content index, Range 0:15 + + + +CX2341X_OSD_SET_ALPHA_CONTENT_INDEX +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 98/0x62 + +Description +^^^^^^^^^^^ + +Assign alpha content index + +Param[0] +^^^^^^^^ + +alpha content index, range 0:15 + + +Encoder firmware API description +-------------------------------- + +CX2341X_ENC_PING_FW +~~~~~~~~~~~~~~~~~~~ + +Enum: 128/0x80 + +Description +^^^^^^^^^^^ + +Does nothing. Can be used to check if the firmware is responding. + + + +CX2341X_ENC_START_CAPTURE +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 129/0x81 + +Description +^^^^^^^^^^^ + +Commences the capture of video, audio and/or VBI data. All encoding +parameters must be initialized prior to this API call. Captures frames +continuously or until a predefined number of frames have been captured. + +Param[0] +^^^^^^^^ + +Capture stream type: + + - 0=MPEG + - 1=Raw + - 2=Raw passthrough + - 3=VBI + + +Param[1] +^^^^^^^^ + +Bitmask: + + - Bit 0 when set, captures YUV + - Bit 1 when set, captures PCM audio + - Bit 2 when set, captures VBI (same as param[0]=3) + - Bit 3 when set, the capture destination is the decoder + (same as param[0]=2) + - Bit 4 when set, the capture destination is the host + +.. note:: this parameter is only meaningful for RAW capture type. + + + +CX2341X_ENC_STOP_CAPTURE +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 130/0x82 + +Description +^^^^^^^^^^^ + +Ends a capture in progress + +Param[0] +^^^^^^^^ + +- 0=stop at end of GOP (generates IRQ) +- 1=stop immediate (no IRQ) + +Param[1] +^^^^^^^^ + +Stream type to stop, see param[0] of API 0x81 + +Param[2] +^^^^^^^^ + +Subtype, see param[1] of API 0x81 + + + +CX2341X_ENC_SET_AUDIO_ID +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 137/0x89 + +Description +^^^^^^^^^^^ + +Assigns the transport stream ID of the encoded audio stream + +Param[0] +^^^^^^^^ + +Audio Stream ID + + + +CX2341X_ENC_SET_VIDEO_ID +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 139/0x8B + +Description +^^^^^^^^^^^ + +Set video transport stream ID + +Param[0] +^^^^^^^^ + +Video stream ID + + + +CX2341X_ENC_SET_PCR_ID +~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 141/0x8D + +Description +^^^^^^^^^^^ + +Assigns the transport stream ID for PCR packets + +Param[0] +^^^^^^^^ + +PCR Stream ID + + + +CX2341X_ENC_SET_FRAME_RATE +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 143/0x8F + +Description +^^^^^^^^^^^ + +Set video frames per second. Change occurs at start of new GOP. + +Param[0] +^^^^^^^^ + +- 0=30fps +- 1=25fps + + + +CX2341X_ENC_SET_FRAME_SIZE +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 145/0x91 + +Description +^^^^^^^^^^^ + +Select video stream encoding resolution. + +Param[0] +^^^^^^^^ + +Height in lines. Default 480 + +Param[1] +^^^^^^^^ + +Width in pixels. Default 720 + + + +CX2341X_ENC_SET_BIT_RATE +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 149/0x95 + +Description +^^^^^^^^^^^ + +Assign average video stream bitrate. + +Param[0] +^^^^^^^^ + +0=variable bitrate, 1=constant bitrate + +Param[1] +^^^^^^^^ + +bitrate in bits per second + +Param[2] +^^^^^^^^ + +peak bitrate in bits per second, divided by 400 + +Param[3] +^^^^^^^^ + +Mux bitrate in bits per second, divided by 400. May be 0 (default). + +Param[4] +^^^^^^^^ + +Rate Control VBR Padding + +Param[5] +^^^^^^^^ + +VBV Buffer used by encoder + +.. note:: + + #) Param\[3\] and Param\[4\] seem to be always 0 + #) Param\[5\] doesn't seem to be used. + + + +CX2341X_ENC_SET_GOP_PROPERTIES +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 151/0x97 + +Description +^^^^^^^^^^^ + +Setup the GOP structure + +Param[0] +^^^^^^^^ + +GOP size (maximum is 34) + +Param[1] +^^^^^^^^ + +Number of B frames between the I and P frame, plus 1. +For example: IBBPBBPBBPBB --> GOP size: 12, number of B frames: 2+1 = 3 + +.. note:: + + GOP size must be a multiple of (B-frames + 1). + + + +CX2341X_ENC_SET_ASPECT_RATIO +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 153/0x99 + +Description +^^^^^^^^^^^ + +Sets the encoding aspect ratio. Changes in the aspect ratio take effect +at the start of the next GOP. + +Param[0] +^^^^^^^^ + +- '0000' forbidden +- '0001' 1:1 square +- '0010' 4:3 +- '0011' 16:9 +- '0100' 2.21:1 +- '0101' to '1111' reserved + + + +CX2341X_ENC_SET_DNR_FILTER_MODE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 155/0x9B + +Description +^^^^^^^^^^^ + +Assign Dynamic Noise Reduction operating mode + +Param[0] +^^^^^^^^ + +Bit0: Spatial filter, set=auto, clear=manual +Bit1: Temporal filter, set=auto, clear=manual + +Param[1] +^^^^^^^^ + +Median filter: + +- 0=Disabled +- 1=Horizontal +- 2=Vertical +- 3=Horiz/Vert +- 4=Diagonal + + + +CX2341X_ENC_SET_DNR_FILTER_PROPS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 157/0x9D + +Description +^^^^^^^^^^^ + +These Dynamic Noise Reduction filter values are only meaningful when +the respective filter is set to "manual" (See API 0x9B) + +Param[0] +^^^^^^^^ + +Spatial filter: default 0, range 0:15 + +Param[1] +^^^^^^^^ + +Temporal filter: default 0, range 0:31 + + + +CX2341X_ENC_SET_CORING_LEVELS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 159/0x9F + +Description +^^^^^^^^^^^ + +Assign Dynamic Noise Reduction median filter properties. + +Param[0] +^^^^^^^^ + +Threshold above which the luminance median filter is enabled. +Default: 0, range 0:255 + +Param[1] +^^^^^^^^ + +Threshold below which the luminance median filter is enabled. +Default: 255, range 0:255 + +Param[2] +^^^^^^^^ + +Threshold above which the chrominance median filter is enabled. +Default: 0, range 0:255 + +Param[3] +^^^^^^^^ + +Threshold below which the chrominance median filter is enabled. +Default: 255, range 0:255 + + + +CX2341X_ENC_SET_SPATIAL_FILTER_TYPE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 161/0xA1 + +Description +^^^^^^^^^^^ + +Assign spatial prefilter parameters + +Param[0] +^^^^^^^^ + +Luminance filter + +- 0=Off +- 1=1D Horizontal +- 2=1D Vertical +- 3=2D H/V Separable (default) +- 4=2D Symmetric non-separable + +Param[1] +^^^^^^^^ + +Chrominance filter + +- 0=Off +- 1=1D Horizontal (default) + + + +CX2341X_ENC_SET_VBI_LINE +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 183/0xB7 + +Description +^^^^^^^^^^^ + +Selects VBI line number. + +Param[0] +^^^^^^^^ + +- Bits 0:4 line number +- Bit 31 0=top_field, 1=bottom_field +- Bits 0:31 all set specifies "all lines" + +Param[1] +^^^^^^^^ + +VBI line information features: 0=disabled, 1=enabled + +Param[2] +^^^^^^^^ + +Slicing: 0=None, 1=Closed Caption +Almost certainly not implemented. Set to 0. + +Param[3] +^^^^^^^^ + +Luminance samples in this line. +Almost certainly not implemented. Set to 0. + +Param[4] +^^^^^^^^ + +Chrominance samples in this line +Almost certainly not implemented. Set to 0. + + + +CX2341X_ENC_SET_STREAM_TYPE +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 185/0xB9 + +Description +^^^^^^^^^^^ + +Assign stream type + +.. note:: + + Transport stream is not working in recent firmwares. + And in older firmwares the timestamps in the TS seem to be + unreliable. + +Param[0] +^^^^^^^^ + +- 0=Program stream +- 1=Transport stream +- 2=MPEG1 stream +- 3=PES A/V stream +- 5=PES Video stream +- 7=PES Audio stream +- 10=DVD stream +- 11=VCD stream +- 12=SVCD stream +- 13=DVD_S1 stream +- 14=DVD_S2 stream + + + +CX2341X_ENC_SET_OUTPUT_PORT +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 187/0xBB + +Description +^^^^^^^^^^^ + +Assign stream output port. Normally 0 when the data is copied through +the PCI bus (DMA), and 1 when the data is streamed to another chip +(pvrusb and cx88-blackbird). + +Param[0] +^^^^^^^^ + +- 0=Memory (default) +- 1=Streaming +- 2=Serial + +Param[1] +^^^^^^^^ + +Unknown, but leaving this to 0 seems to work best. Indications are that +this might have to do with USB support, although passing anything but 0 +only breaks things. + + + +CX2341X_ENC_SET_AUDIO_PROPERTIES +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 189/0xBD + +Description +^^^^^^^^^^^ + +Set audio stream properties, may be called while encoding is in progress. + +.. note:: + + All bitfields are consistent with ISO11172 documentation except + bits 2:3 which ISO docs define as: + + - '11' Layer I + - '10' Layer II + - '01' Layer III + - '00' Undefined + + This discrepancy may indicate a possible error in the documentation. + Testing indicated that only Layer II is actually working, and that + the minimum bitrate should be 192 kbps. + +Param[0] +^^^^^^^^ + +Bitmask: + +.. code-block:: none + + 0:1 '00' 44.1Khz + '01' 48Khz + '10' 32Khz + '11' reserved + + 2:3 '01'=Layer I + '10'=Layer II + + 4:7 Bitrate: + Index | Layer I | Layer II + ------+-------------+------------ + '0000' | free format | free format + '0001' | 32 kbit/s | 32 kbit/s + '0010' | 64 kbit/s | 48 kbit/s + '0011' | 96 kbit/s | 56 kbit/s + '0100' | 128 kbit/s | 64 kbit/s + '0101' | 160 kbit/s | 80 kbit/s + '0110' | 192 kbit/s | 96 kbit/s + '0111' | 224 kbit/s | 112 kbit/s + '1000' | 256 kbit/s | 128 kbit/s + '1001' | 288 kbit/s | 160 kbit/s + '1010' | 320 kbit/s | 192 kbit/s + '1011' | 352 kbit/s | 224 kbit/s + '1100' | 384 kbit/s | 256 kbit/s + '1101' | 416 kbit/s | 320 kbit/s + '1110' | 448 kbit/s | 384 kbit/s + + .. note:: + + For Layer II, not all combinations of total bitrate + and mode are allowed. See ISO11172-3 3-Annex B, + Table 3-B.2 + + 8:9 '00'=Stereo + '01'=JointStereo + '10'=Dual + '11'=Mono + + .. note:: + + The cx23415 cannot decode Joint Stereo properly. + + 10:11 Mode Extension used in joint_stereo mode. + In Layer I and II they indicate which subbands are in + intensity_stereo. All other subbands are coded in stereo. + '00' subbands 4-31 in intensity_stereo, bound==4 + '01' subbands 8-31 in intensity_stereo, bound==8 + '10' subbands 12-31 in intensity_stereo, bound==12 + '11' subbands 16-31 in intensity_stereo, bound==16 + + 12:13 Emphasis: + '00' None + '01' 50/15uS + '10' reserved + '11' CCITT J.17 + + 14 CRC: + '0' off + '1' on + + 15 Copyright: + '0' off + '1' on + + 16 Generation: + '0' copy + '1' original + + + +CX2341X_ENC_HALT_FW +~~~~~~~~~~~~~~~~~~~ + +Enum: 195/0xC3 + +Description +^^^^^^^^^^^ + +The firmware is halted and no further API calls are serviced until the +firmware is uploaded again. + + + +CX2341X_ENC_GET_VERSION +~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 196/0xC4 + +Description +^^^^^^^^^^^ + +Returns the version of the encoder firmware. + +Result[0] +^^^^^^^^^ + +Version bitmask: +- Bits 0:15 build +- Bits 16:23 minor +- Bits 24:31 major + + + +CX2341X_ENC_SET_GOP_CLOSURE +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 197/0xC5 + +Description +^^^^^^^^^^^ + +Assigns the GOP open/close property. + +Param[0] +^^^^^^^^ + +- 0=Open +- 1=Closed + + + +CX2341X_ENC_GET_SEQ_END +~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 198/0xC6 + +Description +^^^^^^^^^^^ + +Obtains the sequence end code of the encoder's buffer. When a capture +is started a number of interrupts are still generated, the last of +which will have Result[0] set to 1 and Result[1] will contain the size +of the buffer. + +Result[0] +^^^^^^^^^ + +State of the transfer (1 if last buffer) + +Result[1] +^^^^^^^^^ + +If Result[0] is 1, this contains the size of the last buffer, undefined +otherwise. + + + +CX2341X_ENC_SET_PGM_INDEX_INFO +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 199/0xC7 + +Description +^^^^^^^^^^^ + +Sets the Program Index Information. +The information is stored as follows: + +.. code-block:: c + + struct info { + u32 length; // Length of this frame + u32 offset_low; // Offset in the file of the + u32 offset_high; // start of this frame + u32 mask1; // Bits 0-2 are the type mask: + // 1=I, 2=P, 4=B + // 0=End of Program Index, other fields + // are invalid. + u32 pts; // The PTS of the frame + u32 mask2; // Bit 0 is bit 32 of the pts. + }; + u32 table_ptr; + struct info index[400]; + +The table_ptr is the encoder memory address in the table were +*new* entries will be written. + +.. note:: This is a ringbuffer, so the table_ptr will wraparound. + +Param[0] +^^^^^^^^ + +Picture Mask: +- 0=No index capture +- 1=I frames +- 3=I,P frames +- 7=I,P,B frames + +(Seems to be ignored, it always indexes I, P and B frames) + +Param[1] +^^^^^^^^ + +Elements requested (up to 400) + +Result[0] +^^^^^^^^^ + +Offset in the encoder memory of the start of the table. + +Result[1] +^^^^^^^^^ + +Number of allocated elements up to a maximum of Param[1] + + + +CX2341X_ENC_SET_VBI_CONFIG +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 200/0xC8 + +Description +^^^^^^^^^^^ + +Configure VBI settings + +Param[0] +^^^^^^^^ + +Bitmap: + +.. code-block:: none + + 0 Mode '0' Sliced, '1' Raw + 1:3 Insertion: + '000' insert in extension & user data + '001' insert in private packets + '010' separate stream and user data + '111' separate stream and private data + 8:15 Stream ID (normally 0xBD) + +Param[1] +^^^^^^^^ + +Frames per interrupt (max 8). Only valid in raw mode. + +Param[2] +^^^^^^^^ + +Total raw VBI frames. Only valid in raw mode. + +Param[3] +^^^^^^^^ + +Start codes + +Param[4] +^^^^^^^^ + +Stop codes + +Param[5] +^^^^^^^^ + +Lines per frame + +Param[6] +^^^^^^^^ + +Byte per line + +Result[0] +^^^^^^^^^ + +Observed frames per interrupt in raw mode only. Rage 1 to Param[1] + +Result[1] +^^^^^^^^^ + +Observed number of frames in raw mode. Range 1 to Param[2] + +Result[2] +^^^^^^^^^ + +Memory offset to start or raw VBI data + + + +CX2341X_ENC_SET_DMA_BLOCK_SIZE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 201/0xC9 + +Description +^^^^^^^^^^^ + +Set DMA transfer block size + +Param[0] +^^^^^^^^ + +DMA transfer block size in bytes or frames. When unit is bytes, +supported block sizes are 2^7, 2^8 and 2^9 bytes. + +Param[1] +^^^^^^^^ + +Unit: 0=bytes, 1=frames + + + +CX2341X_ENC_GET_PREV_DMA_INFO_MB_10 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 202/0xCA + +Description +^^^^^^^^^^^ + +Returns information on the previous DMA transfer in conjunction with +bit 27 of the interrupt mask. Uses mailbox 10. + +Result[0] +^^^^^^^^^ + +Type of stream + +Result[1] +^^^^^^^^^ + +Address Offset + +Result[2] +^^^^^^^^^ + +Maximum size of transfer + + + +CX2341X_ENC_GET_PREV_DMA_INFO_MB_9 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 203/0xCB + +Description +^^^^^^^^^^^ + +Returns information on the previous DMA transfer in conjunction with +bit 27 or 18 of the interrupt mask. Uses mailbox 9. + +Result[0] +^^^^^^^^^ + +Status bits: +- 0 read completed +- 1 write completed +- 2 DMA read error +- 3 DMA write error +- 4 Scatter-Gather array error + +Result[1] +^^^^^^^^^ + +DMA type + +Result[2] +^^^^^^^^^ + +Presentation Time Stamp bits 0..31 + +Result[3] +^^^^^^^^^ + +Presentation Time Stamp bit 32 + + + +CX2341X_ENC_SCHED_DMA_TO_HOST +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 204/0xCC + +Description +^^^^^^^^^^^ + +Setup DMA to host operation + +Param[0] +^^^^^^^^ + +Memory address of link list + +Param[1] +^^^^^^^^ + +Length of link list (wtf: what units ???) + +Param[2] +^^^^^^^^ + +DMA type (0=MPEG) + + + +CX2341X_ENC_INITIALIZE_INPUT +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 205/0xCD + +Description +^^^^^^^^^^^ + +Initializes the video input + + + +CX2341X_ENC_SET_FRAME_DROP_RATE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 208/0xD0 + +Description +^^^^^^^^^^^ + +For each frame captured, skip specified number of frames. + +Param[0] +^^^^^^^^ + +Number of frames to skip + + + +CX2341X_ENC_PAUSE_ENCODER +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 210/0xD2 + +Description +^^^^^^^^^^^ + +During a pause condition, all frames are dropped instead of being encoded. + +Param[0] +^^^^^^^^ + +- 0=Pause encoding +- 1=Continue encoding + + + +CX2341X_ENC_REFRESH_INPUT +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 211/0xD3 + +Description +^^^^^^^^^^^ + +Refreshes the video input + + + +CX2341X_ENC_SET_COPYRIGHT +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 212/0xD4 + +Description +^^^^^^^^^^^ + +Sets stream copyright property + +Param[0] +^^^^^^^^ + + +- 0=Stream is not copyrighted +- 1=Stream is copyrighted + + + +CX2341X_ENC_SET_EVENT_NOTIFICATION +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 213/0xD5 + +Description +^^^^^^^^^^^ + +Setup firmware to notify the host about a particular event. Host must +unmask the interrupt bit. + +Param[0] +^^^^^^^^ + +Event (0=refresh encoder input) + +Param[1] +^^^^^^^^ + +Notification 0=disabled 1=enabled + +Param[2] +^^^^^^^^ + +Interrupt bit + +Param[3] +^^^^^^^^ + +Mailbox slot, -1 if no mailbox required. + + + +CX2341X_ENC_SET_NUM_VSYNC_LINES +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 214/0xD6 + +Description +^^^^^^^^^^^ + +Depending on the analog video decoder used, this assigns the number +of lines for field 1 and 2. + +Param[0] +^^^^^^^^ + +Field 1 number of lines: +- 0x00EF for SAA7114 +- 0x00F0 for SAA7115 +- 0x0105 for Micronas + +Param[1] +^^^^^^^^ + +Field 2 number of lines: +- 0x00EF for SAA7114 +- 0x00F0 for SAA7115 +- 0x0106 for Micronas + + + +CX2341X_ENC_SET_PLACEHOLDER +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 215/0xD7 + +Description +^^^^^^^^^^^ + +Provides a mechanism of inserting custom user data in the MPEG stream. + +Param[0] +^^^^^^^^ + +- 0=extension & user data +- 1=private packet with stream ID 0xBD + +Param[1] +^^^^^^^^ + +Rate at which to insert data, in units of frames (for private packet) +or GOPs (for ext. & user data) + +Param[2] +^^^^^^^^ + +Number of data DWORDs (below) to insert + +Param[3] +^^^^^^^^ + +Custom data 0 + +Param[4] +^^^^^^^^ + +Custom data 1 + +Param[5] +^^^^^^^^ + +Custom data 2 + +Param[6] +^^^^^^^^ + +Custom data 3 + +Param[7] +^^^^^^^^ + +Custom data 4 + +Param[8] +^^^^^^^^ + +Custom data 5 + +Param[9] +^^^^^^^^ + +Custom data 6 + +Param[10] +^^^^^^^^^ + +Custom data 7 + +Param[11] +^^^^^^^^^ + +Custom data 8 + + + +CX2341X_ENC_MUTE_VIDEO +~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 217/0xD9 + +Description +^^^^^^^^^^^ + +Video muting + +Param[0] +^^^^^^^^ + +Bit usage: + +.. code-block:: none + + 0 '0'=video not muted + '1'=video muted, creates frames with the YUV color defined below + 1:7 Unused + 8:15 V chrominance information + 16:23 U chrominance information + 24:31 Y luminance information + + + +CX2341X_ENC_MUTE_AUDIO +~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 218/0xDA + +Description +^^^^^^^^^^^ + +Audio muting + +Param[0] +^^^^^^^^ + +- 0=audio not muted +- 1=audio muted (produces silent mpeg audio stream) + + + +CX2341X_ENC_SET_VERT_CROP_LINE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 219/0xDB + +Description +^^^^^^^^^^^ + +Something to do with 'Vertical Crop Line' + +Param[0] +^^^^^^^^ + +If saa7114 and raw VBI capture and 60 Hz, then set to 10001. +Else 0. + + + +CX2341X_ENC_MISC +~~~~~~~~~~~~~~~~ + +Enum: 220/0xDC + +Description +^^^^^^^^^^^ + +Miscellaneous actions. Not known for 100% what it does. It's really a +sort of ioctl call. The first parameter is a command number, the second +the value. + +Param[0] +^^^^^^^^ + +Command number: + +.. code-block:: none + + 1=set initial SCR value when starting encoding (works). + 2=set quality mode (apparently some test setting). + 3=setup advanced VIM protection handling. + Always 1 for the cx23416 and 0 for cx23415. + 4=generate DVD compatible PTS timestamps + 5=USB flush mode + 6=something to do with the quantization matrix + 7=set navigation pack insertion for DVD: adds 0xbf (private stream 2) + packets to the MPEG. The size of these packets is 2048 bytes (including + the header of 6 bytes: 0x000001bf + length). The payload is zeroed and + it is up to the application to fill them in. These packets are apparently + inserted every four frames. + 8=enable scene change detection (seems to be a failure) + 9=set history parameters of the video input module + 10=set input field order of VIM + 11=set quantization matrix + 12=reset audio interface after channel change or input switch (has no argument). + Needed for the cx2584x, not needed for the mspx4xx, but it doesn't seem to + do any harm calling it regardless. + 13=set audio volume delay + 14=set audio delay + + +Param[1] +^^^^^^^^ + +Command value. + +Decoder firmware API description +-------------------------------- + +.. note:: this API is part of the decoder firmware, so it's cx23415 only. + + + +CX2341X_DEC_PING_FW +~~~~~~~~~~~~~~~~~~~ + +Enum: 0/0x00 + +Description +^^^^^^^^^^^ + +This API call does nothing. It may be used to check if the firmware +is responding. + + + +CX2341X_DEC_START_PLAYBACK +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 1/0x01 + +Description +^^^^^^^^^^^ + +Begin or resume playback. + +Param[0] +^^^^^^^^ + +0 based frame number in GOP to begin playback from. + +Param[1] +^^^^^^^^ + +Specifies the number of muted audio frames to play before normal +audio resumes. (This is not implemented in the firmware, leave at 0) + + + +CX2341X_DEC_STOP_PLAYBACK +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 2/0x02 + +Description +^^^^^^^^^^^ + +Ends playback and clears all decoder buffers. If PTS is not zero, +playback stops at specified PTS. + +Param[0] +^^^^^^^^ + +Display 0=last frame, 1=black + +.. note:: + + this takes effect immediately, so if you want to wait for a PTS, + then use '0', otherwise the screen goes to black at once. + You can call this later (even if there is no playback) with a 1 value + to set the screen to black. + +Param[1] +^^^^^^^^ + +PTS low + +Param[2] +^^^^^^^^ + +PTS high + + + +CX2341X_DEC_SET_PLAYBACK_SPEED +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 3/0x03 + +Description +^^^^^^^^^^^ + +Playback stream at speed other than normal. There are two modes of +operation: + + - Smooth: host transfers entire stream and firmware drops unused + frames. + - Coarse: host drops frames based on indexing as required to achieve + desired speed. + +Param[0] +^^^^^^^^ + +.. code-block:: none + + Bitmap: + 0:7 0 normal + 1 fast only "1.5 times" + n nX fast, 1/nX slow + 30 Framedrop: + '0' during 1.5 times play, every other B frame is dropped + '1' during 1.5 times play, stream is unchanged (bitrate + must not exceed 8mbps) + 31 Speed: + '0' slow + '1' fast + +.. note:: + + n is limited to 2. Anything higher does not result in + faster playback. Instead the host should start dropping frames. + +Param[1] +^^^^^^^^ + +Direction: 0=forward, 1=reverse + +.. note:: + + to make reverse playback work you have to write full GOPs in + reverse order. + +Param[2] +^^^^^^^^ + +.. code-block:: none + + Picture mask: + 1=I frames + 3=I, P frames + 7=I, P, B frames + +Param[3] +^^^^^^^^ + +B frames per GOP (for reverse play only) + +.. note:: + + for reverse playback the Picture Mask should be set to I or I, P. + Adding B frames to the mask will result in corrupt video. This field + has to be set to the correct value in order to keep the timing correct. + +Param[4] +^^^^^^^^ + +Mute audio: 0=disable, 1=enable + +Param[5] +^^^^^^^^ + +Display 0=frame, 1=field + +Param[6] +^^^^^^^^ + +Specifies the number of muted audio frames to play before normal audio +resumes. (Not implemented in the firmware, leave at 0) + + + +CX2341X_DEC_STEP_VIDEO +~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 5/0x05 + +Description +^^^^^^^^^^^ + +Each call to this API steps the playback to the next unit defined below +in the current playback direction. + +Param[0] +^^^^^^^^ + +0=frame, 1=top field, 2=bottom field + + + +CX2341X_DEC_SET_DMA_BLOCK_SIZE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 8/0x08 + +Description +^^^^^^^^^^^ + +Set DMA transfer block size. Counterpart to API 0xC9 + +Param[0] +^^^^^^^^ + +DMA transfer block size in bytes. A different size may be specified +when issuing the DMA transfer command. + + + +CX2341X_DEC_GET_XFER_INFO +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 9/0x09 + +Description +^^^^^^^^^^^ + +This API call may be used to detect an end of stream condition. + +Result[0] +^^^^^^^^^ + +Stream type + +Result[1] +^^^^^^^^^ + +Address offset + +Result[2] +^^^^^^^^^ + +Maximum bytes to transfer + +Result[3] +^^^^^^^^^ + +Buffer fullness + + + +CX2341X_DEC_GET_DMA_STATUS +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 10/0x0A + +Description +^^^^^^^^^^^ + +Status of the last DMA transfer + +Result[0] +^^^^^^^^^ + +Bit 1 set means transfer complete +Bit 2 set means DMA error +Bit 3 set means linked list error + +Result[1] +^^^^^^^^^ + +DMA type: 0=MPEG, 1=OSD, 2=YUV + + + +CX2341X_DEC_SCHED_DMA_FROM_HOST +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 11/0x0B + +Description +^^^^^^^^^^^ + +Setup DMA from host operation. Counterpart to API 0xCC + +Param[0] +^^^^^^^^ + +Memory address of link list + +Param[1] +^^^^^^^^ + +Total # of bytes to transfer + +Param[2] +^^^^^^^^ + +DMA type (0=MPEG, 1=OSD, 2=YUV) + + + +CX2341X_DEC_PAUSE_PLAYBACK +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 13/0x0D + +Description +^^^^^^^^^^^ + +Freeze playback immediately. In this mode, when internal buffers are +full, no more data will be accepted and data request IRQs will be +masked. + +Param[0] +^^^^^^^^ + +Display: 0=last frame, 1=black + + + +CX2341X_DEC_HALT_FW +~~~~~~~~~~~~~~~~~~~ + +Enum: 14/0x0E + +Description +^^^^^^^^^^^ + +The firmware is halted and no further API calls are serviced until +the firmware is uploaded again. + + + +CX2341X_DEC_SET_STANDARD +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 16/0x10 + +Description +^^^^^^^^^^^ + +Selects display standard + +Param[0] +^^^^^^^^ + +0=NTSC, 1=PAL + + + +CX2341X_DEC_GET_VERSION +~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 17/0x11 + +Description +^^^^^^^^^^^ + +Returns decoder firmware version information + +Result[0] +^^^^^^^^^ + +Version bitmask: + - Bits 0:15 build + - Bits 16:23 minor + - Bits 24:31 major + + + +CX2341X_DEC_SET_STREAM_INPUT +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 20/0x14 + +Description +^^^^^^^^^^^ + +Select decoder stream input port + +Param[0] +^^^^^^^^ + +0=memory (default), 1=streaming + + + +CX2341X_DEC_GET_TIMING_INFO +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 21/0x15 + +Description +^^^^^^^^^^^ + +Returns timing information from start of playback + +Result[0] +^^^^^^^^^ + +Frame count by decode order + +Result[1] +^^^^^^^^^ + +Video PTS bits 0:31 by display order + +Result[2] +^^^^^^^^^ + +Video PTS bit 32 by display order + +Result[3] +^^^^^^^^^ + +SCR bits 0:31 by display order + +Result[4] +^^^^^^^^^ + +SCR bit 32 by display order + + + +CX2341X_DEC_SET_AUDIO_MODE +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 22/0x16 + +Description +^^^^^^^^^^^ + +Select audio mode + +Param[0] +^^^^^^^^ + +Dual mono mode action + 0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged + +Param[1] +^^^^^^^^ + +Stereo mode action: + 0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged + + + +CX2341X_DEC_SET_EVENT_NOTIFICATION +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 23/0x17 + +Description +^^^^^^^^^^^ + +Setup firmware to notify the host about a particular event. +Counterpart to API 0xD5 + +Param[0] +^^^^^^^^ + +Event: + - 0=Audio mode change between mono, (joint) stereo and dual channel. + - 3=Decoder started + - 4=Unknown: goes off 10-15 times per second while decoding. + - 5=Some sync event: goes off once per frame. + +Param[1] +^^^^^^^^ + +Notification 0=disabled, 1=enabled + +Param[2] +^^^^^^^^ + +Interrupt bit + +Param[3] +^^^^^^^^ + +Mailbox slot, -1 if no mailbox required. + + + +CX2341X_DEC_SET_DISPLAY_BUFFERS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 24/0x18 + +Description +^^^^^^^^^^^ + +Number of display buffers. To decode all frames in reverse playback you +must use nine buffers. + +Param[0] +^^^^^^^^ + +0=six buffers, 1=nine buffers + + + +CX2341X_DEC_EXTRACT_VBI +~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 25/0x19 + +Description +^^^^^^^^^^^ + +Extracts VBI data + +Param[0] +^^^^^^^^ + +0=extract from extension & user data, 1=extract from private packets + +Result[0] +^^^^^^^^^ + +VBI table location + +Result[1] +^^^^^^^^^ + +VBI table size + + + +CX2341X_DEC_SET_DECODER_SOURCE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 26/0x1A + +Description +^^^^^^^^^^^ + +Selects decoder source. Ensure that the parameters passed to this +API match the encoder settings. + +Param[0] +^^^^^^^^ + +Mode: 0=MPEG from host, 1=YUV from encoder, 2=YUV from host + +Param[1] +^^^^^^^^ + +YUV picture width + +Param[2] +^^^^^^^^ + +YUV picture height + +Param[3] +^^^^^^^^ + +Bitmap: see Param[0] of API 0xBD + + + +CX2341X_DEC_SET_PREBUFFERING +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 30/0x1E + +Description +^^^^^^^^^^^ + +Decoder prebuffering, when enabled up to 128KB are buffered for +streams <8mpbs or 640KB for streams >8mbps + +Param[0] +^^^^^^^^ + +0=off, 1=on + +PVR350 Video decoder registers 0x02002800 -> 0x02002B00 +------------------------------------------------------- + +Author: Ian Armstrong + +Version: v0.4 + +Date: 12 March 2007 + + +This list has been worked out through trial and error. There will be mistakes +and omissions. Some registers have no obvious effect so it's hard to say what +they do, while others interact with each other, or require a certain load +sequence. Horizontal filter setup is one example, with six registers working +in unison and requiring a certain load sequence to correctly configure. The +indexed colour palette is much easier to set at just two registers, but again +it requires a certain load sequence. + +Some registers are fussy about what they are set to. Load in a bad value & the +decoder will fail. A firmware reload will often recover, but sometimes a reset +is required. For registers containing size information, setting them to 0 is +generally a bad idea. For other control registers i.e. 2878, you'll only find +out what values are bad when it hangs. + +.. code-block:: none + + -------------------------------------------------------------------------------- + 2800 + bit 0 + Decoder enable + 0 = disable + 1 = enable + -------------------------------------------------------------------------------- + 2804 + bits 0:31 + Decoder horizontal Y alias register 1 + --------------- + 2808 + bits 0:31 + Decoder horizontal Y alias register 2 + --------------- + 280C + bits 0:31 + Decoder horizontal Y alias register 3 + --------------- + 2810 + bits 0:31 + Decoder horizontal Y alias register 4 + --------------- + 2814 + bits 0:31 + Decoder horizontal Y alias register 5 + --------------- + 2818 + bits 0:31 + Decoder horizontal Y alias trigger + + These six registers control the horizontal aliasing filter for the Y plane. + The first five registers must all be loaded before accessing the trigger + (2818), as this register actually clocks the data through for the first + five. + + To correctly program set the filter, this whole procedure must be done 16 + times. The actual register contents are copied from a lookup-table in the + firmware which contains 4 different filter settings. + + -------------------------------------------------------------------------------- + 281C + bits 0:31 + Decoder horizontal UV alias register 1 + --------------- + 2820 + bits 0:31 + Decoder horizontal UV alias register 2 + --------------- + 2824 + bits 0:31 + Decoder horizontal UV alias register 3 + --------------- + 2828 + bits 0:31 + Decoder horizontal UV alias register 4 + --------------- + 282C + bits 0:31 + Decoder horizontal UV alias register 5 + --------------- + 2830 + bits 0:31 + Decoder horizontal UV alias trigger + + These six registers control the horizontal aliasing for the UV plane. + Operation is the same as the Y filter, with 2830 being the trigger + register. + + -------------------------------------------------------------------------------- + 2834 + bits 0:15 + Decoder Y source width in pixels + + bits 16:31 + Decoder Y destination width in pixels + --------------- + 2838 + bits 0:15 + Decoder UV source width in pixels + + bits 16:31 + Decoder UV destination width in pixels + + NOTE: For both registers, the resulting image must be fully visible on + screen. If the image exceeds the right edge both the source and destination + size must be adjusted to reflect the visible portion. For the source width, + you must take into account the scaling when calculating the new value. + -------------------------------------------------------------------------------- + + 283C + bits 0:31 + Decoder Y horizontal scaling + Normally = Reg 2854 >> 2 + --------------- + 2840 + bits 0:31 + Decoder ?? unknown - horizontal scaling + Usually 0x00080514 + --------------- + 2844 + bits 0:31 + Decoder UV horizontal scaling + Normally = Reg 2854 >> 2 + --------------- + 2848 + bits 0:31 + Decoder ?? unknown - horizontal scaling + Usually 0x00100514 + --------------- + 284C + bits 0:31 + Decoder ?? unknown - Y plane + Usually 0x00200020 + --------------- + 2850 + bits 0:31 + Decoder ?? unknown - UV plane + Usually 0x00200020 + --------------- + 2854 + bits 0:31 + Decoder 'master' value for horizontal scaling + --------------- + 2858 + bits 0:31 + Decoder ?? unknown + Usually 0 + --------------- + 285C + bits 0:31 + Decoder ?? unknown + Normally = Reg 2854 >> 1 + --------------- + 2860 + bits 0:31 + Decoder ?? unknown + Usually 0 + --------------- + 2864 + bits 0:31 + Decoder ?? unknown + Normally = Reg 2854 >> 1 + --------------- + 2868 + bits 0:31 + Decoder ?? unknown + Usually 0 + + Most of these registers either control horizontal scaling, or appear linked + to it in some way. Register 2854 contains the 'master' value & the other + registers can be calculated from that one. You must also remember to + correctly set the divider in Reg 2874. + + To enlarge: + Reg 2854 = (source_width * 0x00200000) / destination_width + Reg 2874 = No divide + + To reduce from full size down to half size: + Reg 2854 = (source_width/2 * 0x00200000) / destination width + Reg 2874 = Divide by 2 + + To reduce from half size down to quarter size: + Reg 2854 = (source_width/4 * 0x00200000) / destination width + Reg 2874 = Divide by 4 + + The result is always rounded up. + + -------------------------------------------------------------------------------- + 286C + bits 0:15 + Decoder horizontal Y buffer offset + + bits 15:31 + Decoder horizontal UV buffer offset + + Offset into the video image buffer. If the offset is gradually incremented, + the on screen image will move left & wrap around higher up on the right. + + -------------------------------------------------------------------------------- + 2870 + bits 0:15 + Decoder horizontal Y output offset + + bits 16:31 + Decoder horizontal UV output offset + + Offsets the actual video output. Controls output alignment of the Y & UV + planes. The higher the value, the greater the shift to the left. Use + reg 2890 to move the image right. + + -------------------------------------------------------------------------------- + 2874 + bits 0:1 + Decoder horizontal Y output size divider + 00 = No divide + 01 = Divide by 2 + 10 = Divide by 3 + + bits 4:5 + Decoder horizontal UV output size divider + 00 = No divide + 01 = Divide by 2 + 10 = Divide by 3 + + bit 8 + Decoder ?? unknown + 0 = Normal + 1 = Affects video output levels + + bit 16 + Decoder ?? unknown + 0 = Normal + 1 = Disable horizontal filter + + -------------------------------------------------------------------------------- + 2878 + bit 0 + ?? unknown + + bit 1 + osd on/off + 0 = osd off + 1 = osd on + + bit 2 + Decoder + osd video timing + 0 = NTSC + 1 = PAL + + bits 3:4 + ?? unknown + + bit 5 + Decoder + osd + Swaps upper & lower fields + + -------------------------------------------------------------------------------- + 287C + bits 0:10 + Decoder & osd ?? unknown + Moves entire screen horizontally. Starts at 0x005 with the screen + shifted heavily to the right. Incrementing in steps of 0x004 will + gradually shift the screen to the left. + + bits 11:31 + ?? unknown + + Normally contents are 0x00101111 (NTSC) or 0x1010111d (PAL) + + -------------------------------------------------------------------------------- + 2880 -------- ?? unknown + 2884 -------- ?? unknown + -------------------------------------------------------------------------------- + 2888 + bit 0 + Decoder + osd ?? unknown + 0 = Normal + 1 = Misaligned fields (Correctable through 289C & 28A4) + + bit 4 + ?? unknown + + bit 8 + ?? unknown + + Warning: Bad values will require a firmware reload to recover. + Known to be bad are 0x000,0x011,0x100,0x111 + -------------------------------------------------------------------------------- + 288C + bits 0:15 + osd ?? unknown + Appears to affect the osd position stability. The higher the value the + more unstable it becomes. Decoder output remains stable. + + bits 16:31 + osd ?? unknown + Same as bits 0:15 + + -------------------------------------------------------------------------------- + 2890 + bits 0:11 + Decoder output horizontal offset. + + Horizontal offset moves the video image right. A small left shift is + possible, but it's better to use reg 2870 for that due to its greater + range. + + NOTE: Video corruption will occur if video window is shifted off the right + edge. To avoid this read the notes for 2834 & 2838. + -------------------------------------------------------------------------------- + 2894 + bits 0:23 + Decoder output video surround colour. + + Contains the colour (in yuv) used to fill the screen when the video is + running in a window. + -------------------------------------------------------------------------------- + 2898 + bits 0:23 + Decoder video window colour + Contains the colour (in yuv) used to fill the video window when the + video is turned off. + + bit 24 + Decoder video output + 0 = Video on + 1 = Video off + + bit 28 + Decoder plane order + 0 = Y,UV + 1 = UV,Y + + bit 29 + Decoder second plane byte order + 0 = Normal (UV) + 1 = Swapped (VU) + + In normal usage, the first plane is Y & the second plane is UV. Though the + order of the planes can be swapped, only the byte order of the second plane + can be swapped. This isn't much use for the Y plane, but can be useful for + the UV plane. + + -------------------------------------------------------------------------------- + 289C + bits 0:15 + Decoder vertical field offset 1 + + bits 16:31 + Decoder vertical field offset 2 + + Controls field output vertical alignment. The higher the number, the lower + the image on screen. Known starting values are 0x011E0017 (NTSC) & + 0x01500017 (PAL) + -------------------------------------------------------------------------------- + 28A0 + bits 0:15 + Decoder & osd width in pixels + + bits 16:31 + Decoder & osd height in pixels + + All output from the decoder & osd are disabled beyond this area. Decoder + output will simply go black outside of this region. If the osd tries to + exceed this area it will become corrupt. + -------------------------------------------------------------------------------- + 28A4 + bits 0:11 + osd left shift. + + Has a range of 0x770->0x7FF. With the exception of 0, any value outside of + this range corrupts the osd. + -------------------------------------------------------------------------------- + 28A8 + bits 0:15 + osd vertical field offset 1 + + bits 16:31 + osd vertical field offset 2 + + Controls field output vertical alignment. The higher the number, the lower + the image on screen. Known starting values are 0x011E0017 (NTSC) & + 0x01500017 (PAL) + -------------------------------------------------------------------------------- + 28AC -------- ?? unknown + | + V + 28BC -------- ?? unknown + -------------------------------------------------------------------------------- + 28C0 + bit 0 + Current output field + 0 = first field + 1 = second field + + bits 16:31 + Current scanline + The scanline counts from the top line of the first field + through to the last line of the second field. + -------------------------------------------------------------------------------- + 28C4 -------- ?? unknown + | + V + 28F8 -------- ?? unknown + -------------------------------------------------------------------------------- + 28FC + bit 0 + ?? unknown + 0 = Normal + 1 = Breaks decoder & osd output + -------------------------------------------------------------------------------- + 2900 + bits 0:31 + Decoder vertical Y alias register 1 + --------------- + 2904 + bits 0:31 + Decoder vertical Y alias register 2 + --------------- + 2908 + bits 0:31 + Decoder vertical Y alias trigger + + These three registers control the vertical aliasing filter for the Y plane. + Operation is similar to the horizontal Y filter (2804). The only real + difference is that there are only two registers to set before accessing + the trigger register (2908). As for the horizontal filter, the values are + taken from a lookup table in the firmware, and the procedure must be + repeated 16 times to fully program the filter. + -------------------------------------------------------------------------------- + 290C + bits 0:31 + Decoder vertical UV alias register 1 + --------------- + 2910 + bits 0:31 + Decoder vertical UV alias register 2 + --------------- + 2914 + bits 0:31 + Decoder vertical UV alias trigger + + These three registers control the vertical aliasing filter for the UV + plane. Operation is the same as the Y filter, with 2914 being the trigger. + -------------------------------------------------------------------------------- + 2918 + bits 0:15 + Decoder Y source height in pixels + + bits 16:31 + Decoder Y destination height in pixels + --------------- + 291C + bits 0:15 + Decoder UV source height in pixels divided by 2 + + bits 16:31 + Decoder UV destination height in pixels + + NOTE: For both registers, the resulting image must be fully visible on + screen. If the image exceeds the bottom edge both the source and + destination size must be adjusted to reflect the visible portion. For the + source height, you must take into account the scaling when calculating the + new value. + -------------------------------------------------------------------------------- + 2920 + bits 0:31 + Decoder Y vertical scaling + Normally = Reg 2930 >> 2 + --------------- + 2924 + bits 0:31 + Decoder Y vertical scaling + Normally = Reg 2920 + 0x514 + --------------- + 2928 + bits 0:31 + Decoder UV vertical scaling + When enlarging = Reg 2930 >> 2 + When reducing = Reg 2930 >> 3 + --------------- + 292C + bits 0:31 + Decoder UV vertical scaling + Normally = Reg 2928 + 0x514 + --------------- + 2930 + bits 0:31 + Decoder 'master' value for vertical scaling + --------------- + 2934 + bits 0:31 + Decoder ?? unknown - Y vertical scaling + --------------- + 2938 + bits 0:31 + Decoder Y vertical scaling + Normally = Reg 2930 + --------------- + 293C + bits 0:31 + Decoder ?? unknown - Y vertical scaling + --------------- + 2940 + bits 0:31 + Decoder UV vertical scaling + When enlarging = Reg 2930 >> 1 + When reducing = Reg 2930 + --------------- + 2944 + bits 0:31 + Decoder ?? unknown - UV vertical scaling + --------------- + 2948 + bits 0:31 + Decoder UV vertical scaling + Normally = Reg 2940 + --------------- + 294C + bits 0:31 + Decoder ?? unknown - UV vertical scaling + + Most of these registers either control vertical scaling, or appear linked + to it in some way. Register 2930 contains the 'master' value & all other + registers can be calculated from that one. You must also remember to + correctly set the divider in Reg 296C + + To enlarge: + Reg 2930 = (source_height * 0x00200000) / destination_height + Reg 296C = No divide + + To reduce from full size down to half size: + Reg 2930 = (source_height/2 * 0x00200000) / destination height + Reg 296C = Divide by 2 + + To reduce from half down to quarter. + Reg 2930 = (source_height/4 * 0x00200000) / destination height + Reg 296C = Divide by 4 + + -------------------------------------------------------------------------------- + 2950 + bits 0:15 + Decoder Y line index into display buffer, first field + + bits 16:31 + Decoder Y vertical line skip, first field + -------------------------------------------------------------------------------- + 2954 + bits 0:15 + Decoder Y line index into display buffer, second field + + bits 16:31 + Decoder Y vertical line skip, second field + -------------------------------------------------------------------------------- + 2958 + bits 0:15 + Decoder UV line index into display buffer, first field + + bits 16:31 + Decoder UV vertical line skip, first field + -------------------------------------------------------------------------------- + 295C + bits 0:15 + Decoder UV line index into display buffer, second field + + bits 16:31 + Decoder UV vertical line skip, second field + -------------------------------------------------------------------------------- + 2960 + bits 0:15 + Decoder destination height minus 1 + + bits 16:31 + Decoder destination height divided by 2 + -------------------------------------------------------------------------------- + 2964 + bits 0:15 + Decoder Y vertical offset, second field + + bits 16:31 + Decoder Y vertical offset, first field + + These two registers shift the Y plane up. The higher the number, the + greater the shift. + -------------------------------------------------------------------------------- + 2968 + bits 0:15 + Decoder UV vertical offset, second field + + bits 16:31 + Decoder UV vertical offset, first field + + These two registers shift the UV plane up. The higher the number, the + greater the shift. + -------------------------------------------------------------------------------- + 296C + bits 0:1 + Decoder vertical Y output size divider + 00 = No divide + 01 = Divide by 2 + 10 = Divide by 4 + + bits 8:9 + Decoder vertical UV output size divider + 00 = No divide + 01 = Divide by 2 + 10 = Divide by 4 + -------------------------------------------------------------------------------- + 2970 + bit 0 + Decoder ?? unknown + 0 = Normal + 1 = Affect video output levels + + bit 16 + Decoder ?? unknown + 0 = Normal + 1 = Disable vertical filter + + -------------------------------------------------------------------------------- + 2974 -------- ?? unknown + | + V + 29EF -------- ?? unknown + -------------------------------------------------------------------------------- + 2A00 + bits 0:2 + osd colour mode + 000 = 8 bit indexed + 001 = 16 bit (565) + 010 = 15 bit (555) + 011 = 12 bit (444) + 100 = 32 bit (8888) + + bits 4:5 + osd display bpp + 01 = 8 bit + 10 = 16 bit + 11 = 32 bit + + bit 8 + osd global alpha + 0 = Off + 1 = On + + bit 9 + osd local alpha + 0 = Off + 1 = On + + bit 10 + osd colour key + 0 = Off + 1 = On + + bit 11 + osd ?? unknown + Must be 1 + + bit 13 + osd colour space + 0 = ARGB + 1 = AYVU + + bits 16:31 + osd ?? unknown + Must be 0x001B (some kind of buffer pointer ?) + + When the bits-per-pixel is set to 8, the colour mode is ignored and + assumed to be 8 bit indexed. For 16 & 32 bits-per-pixel the colour depth + is honoured, and when using a colour depth that requires fewer bytes than + allocated the extra bytes are used as padding. So for a 32 bpp with 8 bit + index colour, there are 3 padding bytes per pixel. It's also possible to + select 16bpp with a 32 bit colour mode. This results in the pixel width + being doubled, but the color key will not work as expected in this mode. + + Colour key is as it suggests. You designate a colour which will become + completely transparent. When using 565, 555 or 444 colour modes, the + colour key is always 16 bits wide. The colour to key on is set in Reg 2A18. + + Local alpha works differently depending on the colour mode. For 32bpp & 8 + bit indexed, local alpha is a per-pixel 256 step transparency, with 0 being + transparent and 255 being solid. For the 16bpp modes 555 & 444, the unused + bit(s) act as a simple transparency switch, with 0 being solid & 1 being + fully transparent. There is no local alpha support for 16bit 565. + + Global alpha is a 256 step transparency that applies to the entire osd, + with 0 being transparent & 255 being solid. + + It's possible to combine colour key, local alpha & global alpha. + -------------------------------------------------------------------------------- + 2A04 + bits 0:15 + osd x coord for left edge + + bits 16:31 + osd y coord for top edge + --------------- + 2A08 + bits 0:15 + osd x coord for right edge + + bits 16:31 + osd y coord for bottom edge + + For both registers, (0,0) = top left corner of the display area. These + registers do not control the osd size, only where it's positioned & how + much is visible. The visible osd area cannot exceed the right edge of the + display, otherwise the osd will become corrupt. See reg 2A10 for + setting osd width. + -------------------------------------------------------------------------------- + 2A0C + bits 0:31 + osd buffer index + + An index into the osd buffer. Slowly incrementing this moves the osd left, + wrapping around onto the right edge + -------------------------------------------------------------------------------- + 2A10 + bits 0:11 + osd buffer 32 bit word width + + Contains the width of the osd measured in 32 bit words. This means that all + colour modes are restricted to a byte width which is divisible by 4. + -------------------------------------------------------------------------------- + 2A14 + bits 0:15 + osd height in pixels + + bits 16:32 + osd line index into buffer + osd will start displaying from this line. + -------------------------------------------------------------------------------- + 2A18 + bits 0:31 + osd colour key + + Contains the colour value which will be transparent. + -------------------------------------------------------------------------------- + 2A1C + bits 0:7 + osd global alpha + + Contains the global alpha value (equiv ivtvfbctl --alpha XX) + -------------------------------------------------------------------------------- + 2A20 -------- ?? unknown + | + V + 2A2C -------- ?? unknown + -------------------------------------------------------------------------------- + 2A30 + bits 0:7 + osd colour to change in indexed palette + --------------- + 2A34 + bits 0:31 + osd colour for indexed palette + + To set the new palette, first load the index of the colour to change into + 2A30, then load the new colour into 2A34. The full palette is 256 colours, + so the index range is 0x00-0xFF + -------------------------------------------------------------------------------- + 2A38 -------- ?? unknown + 2A3C -------- ?? unknown + -------------------------------------------------------------------------------- + 2A40 + bits 0:31 + osd ?? unknown + + Affects overall brightness, wrapping around to black + -------------------------------------------------------------------------------- + 2A44 + bits 0:31 + osd ?? unknown + + Green tint + -------------------------------------------------------------------------------- + 2A48 + bits 0:31 + osd ?? unknown + + Red tint + -------------------------------------------------------------------------------- + 2A4C + bits 0:31 + osd ?? unknown + + Affects overall brightness, wrapping around to black + -------------------------------------------------------------------------------- + 2A50 + bits 0:31 + osd ?? unknown + + Colour shift + -------------------------------------------------------------------------------- + 2A54 + bits 0:31 + osd ?? unknown + + Colour shift + -------------------------------------------------------------------------------- + 2A58 -------- ?? unknown + | + V + 2AFC -------- ?? unknown + -------------------------------------------------------------------------------- + 2B00 + bit 0 + osd filter control + 0 = filter off + 1 = filter on + + bits 1:4 + osd ?? unknown + + -------------------------------------------------------------------------------- + +The cx231xx DMA engine +---------------------- + + +This page describes the structures and procedures used by the cx2341x DMA +engine. + +Introduction +~~~~~~~~~~~~ + +The cx2341x PCI interface is busmaster capable. This means it has a DMA +engine to efficiently transfer large volumes of data between the card and main +memory without requiring help from a CPU. Like most hardware, it must operate +on contiguous physical memory. This is difficult to come by in large quantities +on virtual memory machines. + +Therefore, it also supports a technique called "scatter-gather". The card can +transfer multiple buffers in one operation. Instead of allocating one large +contiguous buffer, the driver can allocate several smaller buffers. + +In practice, I've seen the average transfer to be roughly 80K, but transfers +above 128K were not uncommon, particularly at startup. The 128K figure is +important, because that is the largest block that the kernel can normally +allocate. Even still, 128K blocks are hard to come by, so the driver writer is +urged to choose a smaller block size and learn the scatter-gather technique. + +Mailbox #10 is reserved for DMA transfer information. + +Note: the hardware expects little-endian data ('intel format'). + +Flow +~~~~ + +This section describes, in general, the order of events when handling DMA +transfers. Detailed information follows this section. + +- The card raises the Encoder interrupt. +- The driver reads the transfer type, offset and size from Mailbox #10. +- The driver constructs the scatter-gather array from enough free dma buffers + to cover the size. +- The driver schedules the DMA transfer via the ScheduleDMAtoHost API call. +- The card raises the DMA Complete interrupt. +- The driver checks the DMA status register for any errors. +- The driver post-processes the newly transferred buffers. + +NOTE! It is possible that the Encoder and DMA Complete interrupts get raised +simultaneously. (End of the last, start of the next, etc.) + +Mailbox #10 +~~~~~~~~~~~ + +The Flags, Command, Return Value and Timeout fields are ignored. + +- Name: Mailbox #10 +- Results[0]: Type: 0: MPEG. +- Results[1]: Offset: The position relative to the card's memory space. +- Results[2]: Size: The exact number of bytes to transfer. + +My speculation is that since the StartCapture API has a capture type of "RAW" +available, that the type field will have other values that correspond to YUV +and PCM data. + +Scatter-Gather Array +~~~~~~~~~~~~~~~~~~~~ + +The scatter-gather array is a contiguously allocated block of memory that +tells the card the source and destination of each data-block to transfer. +Card "addresses" are derived from the offset supplied by Mailbox #10. Host +addresses are the physical memory location of the target DMA buffer. + +Each S-G array element is a struct of three 32-bit words. The first word is +the source address, the second is the destination address. Both take up the +entire 32 bits. The lowest 18 bits of the third word is the transfer byte +count. The high-bit of the third word is the "last" flag. The last-flag tells +the card to raise the DMA_DONE interrupt. From hard personal experience, if +you forget to set this bit, the card will still "work" but the stream will +most likely get corrupted. + +The transfer count must be a multiple of 256. Therefore, the driver will need +to track how much data in the target buffer is valid and deal with it +accordingly. + +Array Element: + +- 32-bit Source Address +- 32-bit Destination Address +- 14-bit reserved (high bit is the last flag) +- 18-bit byte count + +DMA Transfer Status +~~~~~~~~~~~~~~~~~~~ + +Register 0x0004 holds the DMA Transfer Status: + +- bit 0: read completed +- bit 1: write completed +- bit 2: DMA read error +- bit 3: DMA write error +- bit 4: Scatter-Gather array error diff --git a/Documentation/driver-api/media/drivers/cx88-devel.rst b/Documentation/driver-api/media/drivers/cx88-devel.rst new file mode 100644 index 0000000000..cfe7c03f49 --- /dev/null +++ b/Documentation/driver-api/media/drivers/cx88-devel.rst @@ -0,0 +1,113 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The cx88 driver +=============== + +Author: Gerd Hoffmann + +Documentation missing at the cx88 datasheet +------------------------------------------- + +MO_OUTPUT_FORMAT (0x310164) + +.. code-block:: none + + Previous default from DScaler: 0x1c1f0008 + Digit 8: 31-28 + 28: PREVREMOD = 1 + + Digit 7: 27-24 (0xc = 12 = b1100 ) + 27: COMBALT = 1 + 26: PAL_INV_PHASE + (DScaler apparently set this to 1, resulted in sucky picture) + + Digits 6,5: 23-16 + 25-16: COMB_RANGE = 0x1f [default] (9 bits -> max 512) + + Digit 4: 15-12 + 15: DISIFX = 0 + 14: INVCBF = 0 + 13: DISADAPT = 0 + 12: NARROWADAPT = 0 + + Digit 3: 11-8 + 11: FORCE2H + 10: FORCEREMD + 9: NCHROMAEN + 8: NREMODEN + + Digit 2: 7-4 + 7-6: YCORE + 5-4: CCORE + + Digit 1: 3-0 + 3: RANGE = 1 + 2: HACTEXT + 1: HSFMT + +0x47 is the sync byte for MPEG-2 transport stream packets. +Datasheet incorrectly states to use 47 decimal. 188 is the length. +All DVB compliant frontends output packets with this start code. + +Hauppauge WinTV cx88 IR information +----------------------------------- + +The controls for the mux are GPIO [0,1] for source, and GPIO 2 for muting. + +====== ======== ================================================= +GPIO0 GPIO1 +====== ======== ================================================= + 0 0 TV Audio + 1 0 FM radio + 0 1 Line-In + 1 1 Mono tuner bypass or CD passthru (tuner specific) +====== ======== ================================================= + +GPIO 16(I believe) is tied to the IR port (if present). + + +From the data sheet: + +- Register 24'h20004 PCI Interrupt Status + + - bit [18] IR_SMP_INT Set when 32 input samples have been collected over + - gpio[16] pin into GP_SAMPLE register. + +What's missing from the data sheet: + +- Setup 4KHz sampling rate (roughly 2x oversampled; good enough for our RC5 + compat remote) +- set register 0x35C050 to 0xa80a80 +- enable sampling +- set register 0x35C054 to 0x5 +- enable the IRQ bit 18 in the interrupt mask register (and + provide for a handler) + +GP_SAMPLE register is at 0x35C058 + +Bits are then right shifted into the GP_SAMPLE register at the specified +rate; you get an interrupt when a full DWORD is received. +You need to recover the actual RC5 bits out of the (oversampled) IR sensor +bits. (Hint: look for the 0/1and 1/0 crossings of the RC5 bi-phase data) An +actual raw RC5 code will span 2-3 DWORDS, depending on the actual alignment. + +I'm pretty sure when no IR signal is present the receiver is always in a +marking state(1); but stray light, etc can cause intermittent noise values +as well. Remember, this is a free running sample of the IR receiver state +over time, so don't assume any sample starts at any particular place. + +Additional info +~~~~~~~~~~~~~~~ + +This data sheet (google search) seems to have a lovely description of the +RC5 basics: +http://www.atmel.com/dyn/resources/prod_documents/doc2817.pdf + +This document has more data: +http://www.nenya.be/beor/electronics/rc5.htm + +This document has a how to decode a bi-phase data stream: +http://www.ee.washington.edu/circuit_archive/text/ir_decode.txt + +This document has still more info: +http://www.xs4all.nl/~sbp/knowledge/ir/rc5.htm diff --git a/Documentation/driver-api/media/drivers/dvb-usb.rst b/Documentation/driver-api/media/drivers/dvb-usb.rst new file mode 100644 index 0000000000..b2d5d9e62b --- /dev/null +++ b/Documentation/driver-api/media/drivers/dvb-usb.rst @@ -0,0 +1,357 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Idea behind the dvb-usb-framework +================================= + +.. note:: + + #) This documentation is outdated. Please check at the DVB wiki + at https://linuxtv.org/wiki for more updated info. + + #) **deprecated:** Newer DVB USB drivers should use the dvb-usb-v2 framework. + +In March 2005 I got the new Twinhan USB2.0 DVB-T device. They provided specs +and a firmware. + +Quite keen I wanted to put the driver (with some quirks of course) into dibusb. +After reading some specs and doing some USB snooping, it realized, that the +dibusb-driver would be a complete mess afterwards. So I decided to do it in a +different way: With the help of a dvb-usb-framework. + +The framework provides generic functions (mostly kernel API calls), such as: + +- Transport Stream URB handling in conjunction with dvb-demux-feed-control + (bulk and isoc are supported) +- registering the device for the DVB-API +- registering an I2C-adapter if applicable +- remote-control/input-device handling +- firmware requesting and loading (currently just for the Cypress USB + controllers) +- other functions/methods which can be shared by several drivers (such as + functions for bulk-control-commands) +- TODO: a I2C-chunker. It creates device-specific chunks of register-accesses + depending on length of a register and the number of values that can be + multi-written and multi-read. + +The source code of the particular DVB USB devices does just the communication +with the device via the bus. The connection between the DVB-API-functionality +is done via callbacks, assigned in a static device-description (struct +dvb_usb_device) each device-driver has to have. + +For an example have a look in drivers/media/usb/dvb-usb/vp7045*. + +Objective is to migrate all the usb-devices (dibusb, cinergyT2, maybe the +ttusb; flexcop-usb already benefits from the generic flexcop-device) to use +the dvb-usb-lib. + +TODO: dynamic enabling and disabling of the pid-filter in regard to number of +feeds requested. + +Supported devices +----------------- + +See the LinuxTV DVB Wiki at https://linuxtv.org for a complete list of +cards/drivers/firmwares: +https://linuxtv.org/wiki/index.php/DVB_USB + +0. History & News: + + 2005-06-30 + + - added support for WideView WT-220U (Thanks to Steve Chang) + + 2005-05-30 + + - added basic isochronous support to the dvb-usb-framework + - added support for Conexant Hybrid reference design and Nebula + DigiTV USB + + 2005-04-17 + + - all dibusb devices ported to make use of the dvb-usb-framework + + 2005-04-02 + + - re-enabled and improved remote control code. + + 2005-03-31 + + - ported the Yakumo/Hama/Typhoon DVB-T USB2.0 device to dvb-usb. + + 2005-03-30 + + - first commit of the dvb-usb-module based on the dibusb-source. + First device is a new driver for the + TwinhanDTV Alpha / MagicBox II USB2.0-only DVB-T device. + - (change from dvb-dibusb to dvb-usb) + + 2005-03-28 + + - added support for the AVerMedia AverTV DVB-T USB2.0 device + (Thanks to Glen Harris and Jiun-Kuei Jung, AVerMedia) + + 2005-03-14 + + - added support for the Typhoon/Yakumo/HAMA DVB-T mobile USB2.0 + + 2005-02-11 + + - added support for the KWorld/ADSTech Instant DVB-T USB2.0. + Thanks a lot to Joachim von Caron + + 2005-02-02 + - added support for the Hauppauge Win-TV Nova-T USB2 + + 2005-01-31 + - distorted streaming is gone for USB1.1 devices + + 2005-01-13 + + - moved the mirrored pid_filter_table back to dvb-dibusb + first almost working version for HanfTek UMT-010 + found out, that Yakumo/HAMA/Typhoon are predecessors of the HanfTek UMT-010 + + 2005-01-10 + + - refactoring completed, now everything is very delightful + + - tuner quirks for some weird devices (Artec T1 AN2235 device has sometimes a + Panasonic Tuner assembled). Tunerprobing implemented. + Thanks a lot to Gunnar Wittich. + + 2004-12-29 + + - after several days of struggling around bug of no returning URBs fixed. + + 2004-12-26 + + - refactored the dibusb-driver, split into separate files + - i2c-probing enabled + + 2004-12-06 + + - possibility for demod i2c-address probing + - new usb IDs (Compro, Artec) + + 2004-11-23 + + - merged changes from DiB3000MC_ver2.1 + - revised the debugging + - possibility to deliver the complete TS for USB2.0 + + 2004-11-21 + + - first working version of the dib3000mc/p frontend driver. + + 2004-11-12 + + - added additional remote control keys. Thanks to Uwe Hanke. + + 2004-11-07 + + - added remote control support. Thanks to David Matthews. + + 2004-11-05 + + - added support for a new devices (Grandtec/Avermedia/Artec) + - merged my changes (for dib3000mb/dibusb) to the FE_REFACTORING, because it became HEAD + - moved transfer control (pid filter, fifo control) from usb driver to frontend, it seems + better settled there (added xfer_ops-struct) + - created a common files for frontends (mc/p/mb) + + 2004-09-28 + + - added support for a new device (Unknown, vendor ID is Hyper-Paltek) + + 2004-09-20 + + - added support for a new device (Compro DVB-U2000), thanks + to Amaury Demol for reporting + - changed usb TS transfer method (several urbs, stopping transfer + before setting a new pid) + + 2004-09-13 + + - added support for a new device (Artec T1 USB TVBOX), thanks + to Christian Motschke for reporting + + 2004-09-05 + + - released the dibusb device and dib3000mb-frontend driver + (old news for vp7041.c) + + 2004-07-15 + + - found out, by accident, that the device has a TUA6010XS for PLL + + 2004-07-12 + + - figured out, that the driver should also work with the + CTS Portable (Chinese Television System) + + 2004-07-08 + + - firmware-extraction-2.422-problem solved, driver is now working + properly with firmware extracted from 2.422 + - #if for 2.6.4 (dvb), compile issue + - changed firmware handling, see vp7041.txt sec 1.1 + + 2004-07-02 + + - some tuner modifications, v0.1, cleanups, first public + + 2004-06-28 + + - now using the dvb_dmx_swfilter_packets, everything runs fine now + + 2004-06-27 + + - able to watch and switching channels (pre-alpha) + - no section filtering yet + + 2004-06-06 + + - first TS received, but kernel oops :/ + + 2004-05-14 + + - firmware loader is working + + 2004-05-11 + + - start writing the driver + +How to use? +----------- + +Firmware +~~~~~~~~ + +Most of the USB drivers need to download a firmware to the device before start +working. + +Have a look at the Wikipage for the DVB-USB-drivers to find out, which firmware +you need for your device: + +https://linuxtv.org/wiki/index.php/DVB_USB + +Compiling +~~~~~~~~~ + +Since the driver is in the linux kernel, activating the driver in +your favorite config-environment should sufficient. I recommend +to compile the driver as module. Hotplug does the rest. + +If you use dvb-kernel enter the build-2.6 directory run 'make' and 'insmod.sh +load' afterwards. + +Loading the drivers +~~~~~~~~~~~~~~~~~~~ + +Hotplug is able to load the driver, when it is needed (because you plugged +in the device). + +If you want to enable debug output, you have to load the driver manually and +from within the dvb-kernel cvs repository. + +first have a look, which debug level are available: + +.. code-block:: none + + # modinfo dvb-usb + # modinfo dvb-usb-vp7045 + + etc. + +.. code-block:: none + + modprobe dvb-usb debug= + modprobe dvb-usb-vp7045 debug= + etc. + +should do the trick. + +When the driver is loaded successfully, the firmware file was in +the right place and the device is connected, the "Power"-LED should be +turned on. + +At this point you should be able to start a dvb-capable application. I'm use +(t|s)zap, mplayer and dvbscan to test the basics. VDR-xine provides the +long-term test scenario. + +Known problems and bugs +----------------------- + +- Don't remove the USB device while running an DVB application, your system + will go crazy or die most likely. + +Adding support for devices +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +TODO + +USB1.1 Bandwidth limitation +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A lot of the currently supported devices are USB1.1 and thus they have a +maximum bandwidth of about 5-6 MBit/s when connected to a USB2.0 hub. +This is not enough for receiving the complete transport stream of a +DVB-T channel (which is about 16 MBit/s). Normally this is not a +problem, if you only want to watch TV (this does not apply for HDTV), +but watching a channel while recording another channel on the same +frequency simply does not work very well. This applies to all USB1.1 +DVB-T devices, not just the dvb-usb-devices) + +The bug, where the TS is distorted by a heavy usage of the device is gone +definitely. All dvb-usb-devices I was using (Twinhan, Kworld, DiBcom) are +working like charm now with VDR. Sometimes I even was able to record a channel +and watch another one. + +Comments +~~~~~~~~ + +Patches, comments and suggestions are very very welcome. + +3. Acknowledgements +------------------- + + Amaury Demol (Amaury.Demol@parrot.com) and Francois Kanounnikoff from DiBcom for + providing specs, code and help, on which the dvb-dibusb, dib3000mb and + dib3000mc are based. + + David Matthews for identifying a new device type (Artec T1 with AN2235) + and for extending dibusb with remote control event handling. Thank you. + + Alex Woods for frequently answering question about usb and dvb + stuff, a big thank you. + + Bernd Wagner for helping with huge bug reports and discussions. + + Gunnar Wittich and Joachim von Caron for their trust for providing + root-shells on their machines to implement support for new devices. + + Allan Third and Michael Hutchinson for their help to write the Nebula + digitv-driver. + + Glen Harris for bringing up, that there is a new dibusb-device and Jiun-Kuei + Jung from AVerMedia who kindly provided a special firmware to get the device + up and running in Linux. + + Jennifer Chen, Jeff and Jack from Twinhan for kindly supporting by + writing the vp7045-driver. + + Steve Chang from WideView for providing information for new devices and + firmware files. + + Michael Paxton for submitting remote control keymaps. + + Some guys on the linux-dvb mailing list for encouraging me. + + Peter Schildmann >peter.schildmann-nospam-at-web.de< for his + user-level firmware loader, which saves a lot of time + (when writing the vp7041 driver) + + Ulf Hermenau for helping me out with traditional chinese. + + André Smoktun and Christian Frömmel for supporting me with + hardware and listening to my problems very patiently. diff --git a/Documentation/driver-api/media/drivers/fimc-devel.rst b/Documentation/driver-api/media/drivers/fimc-devel.rst new file mode 100644 index 0000000000..4c6b7c8be1 --- /dev/null +++ b/Documentation/driver-api/media/drivers/fimc-devel.rst @@ -0,0 +1,33 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: + +The Samsung S5P/EXYNOS4 FIMC driver +=================================== + +Copyright |copy| 2012 - 2013 Samsung Electronics Co., Ltd. + +Files partitioning +------------------ + +- media device driver + + drivers/media/platform/samsung/exynos4-is/media-dev.[ch] + +- camera capture video device driver + + drivers/media/platform/samsung/exynos4-is/fimc-capture.c + +- MIPI-CSI2 receiver subdev + + drivers/media/platform/samsung/exynos4-is/mipi-csis.[ch] + +- video post-processor (mem-to-mem) + + drivers/media/platform/samsung/exynos4-is/fimc-core.c + +- common files + + drivers/media/platform/samsung/exynos4-is/fimc-core.h + drivers/media/platform/samsung/exynos4-is/fimc-reg.h + drivers/media/platform/samsung/exynos4-is/regs-fimc.h diff --git a/Documentation/driver-api/media/drivers/frontends.rst b/Documentation/driver-api/media/drivers/frontends.rst new file mode 100644 index 0000000000..7b8336ece6 --- /dev/null +++ b/Documentation/driver-api/media/drivers/frontends.rst @@ -0,0 +1,32 @@ +.. SPDX-License-Identifier: GPL-2.0 + +**************** +Frontend drivers +**************** + +Frontend attach headers +*********************** + +.. Keep it on alphabetic order + +.. kernel-doc:: drivers/media/dvb-frontends/a8293.h +.. kernel-doc:: drivers/media/dvb-frontends/af9013.h +.. kernel-doc:: drivers/media/dvb-frontends/ascot2e.h +.. kernel-doc:: drivers/media/dvb-frontends/cxd2820r.h +.. kernel-doc:: drivers/media/dvb-frontends/drxk.h +.. kernel-doc:: drivers/media/dvb-frontends/dvb-pll.h +.. kernel-doc:: drivers/media/dvb-frontends/helene.h +.. kernel-doc:: drivers/media/dvb-frontends/horus3a.h +.. kernel-doc:: drivers/media/dvb-frontends/ix2505v.h +.. kernel-doc:: drivers/media/dvb-frontends/m88ds3103.h +.. kernel-doc:: drivers/media/dvb-frontends/mb86a20s.h +.. kernel-doc:: drivers/media/dvb-frontends/mn88472.h +.. kernel-doc:: drivers/media/dvb-frontends/rtl2830.h +.. kernel-doc:: drivers/media/dvb-frontends/rtl2832.h +.. kernel-doc:: drivers/media/dvb-frontends/rtl2832_sdr.h +.. kernel-doc:: drivers/media/dvb-frontends/stb6000.h +.. kernel-doc:: drivers/media/dvb-frontends/tda10071.h +.. kernel-doc:: drivers/media/dvb-frontends/tda826x.h +.. kernel-doc:: drivers/media/dvb-frontends/zd1301_demod.h +.. kernel-doc:: drivers/media/dvb-frontends/zl10036.h + diff --git a/Documentation/driver-api/media/drivers/index.rst b/Documentation/driver-api/media/drivers/index.rst new file mode 100644 index 0000000000..c4123a16b5 --- /dev/null +++ b/Documentation/driver-api/media/drivers/index.rst @@ -0,0 +1,40 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: + +=================================== +Media driver-specific documentation +=================================== + +Video4Linux (V4L) drivers +========================= + +.. toctree:: + :maxdepth: 5 + + bttv-devel + cx2341x-devel + cx88-devel + fimc-devel + pvrusb2 + pxa_camera + radiotrack + rkisp1 + saa7134-devel + sh_mobile_ceu_camera + tuners + vimc-devel + zoran + ccs/ccs + + +Digital TV drivers +================== + +.. toctree:: + :maxdepth: 5 + + dvb-usb + frontends + vidtv + contributors diff --git a/Documentation/driver-api/media/drivers/pvrusb2.rst b/Documentation/driver-api/media/drivers/pvrusb2.rst new file mode 100644 index 0000000000..cbd9359c24 --- /dev/null +++ b/Documentation/driver-api/media/drivers/pvrusb2.rst @@ -0,0 +1,202 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The pvrusb2 driver +================== + +Author: Mike Isely + +Background +---------- + +This driver is intended for the "Hauppauge WinTV PVR USB 2.0", which +is a USB 2.0 hosted TV Tuner. This driver is a work in progress. +Its history started with the reverse-engineering effort by Björn +Danielsson whose web page can be found here: +http://pvrusb2.dax.nu/ + +From there Aurelien Alleaume began an effort to +create a video4linux compatible driver. I began with Aurelien's +last known snapshot and evolved the driver to the state it is in +here. + +More information on this driver can be found at: +https://www.isely.net/pvrusb2.html + + +This driver has a strong separation of layers. They are very +roughly: + +1. Low level wire-protocol implementation with the device. + +2. I2C adaptor implementation and corresponding I2C client drivers + implemented elsewhere in V4L. + +3. High level hardware driver implementation which coordinates all + activities that ensure correct operation of the device. + +4. A "context" layer which manages instancing of driver, setup, + tear-down, arbitration, and interaction with high level + interfaces appropriately as devices are hotplugged in the + system. + +5. High level interfaces which glue the driver to various published + Linux APIs (V4L, sysfs, maybe DVB in the future). + +The most important shearing layer is between the top 2 layers. A +lot of work went into the driver to ensure that any kind of +conceivable API can be laid on top of the core driver. (Yes, the +driver internally leverages V4L to do its work but that really has +nothing to do with the API published by the driver to the outside +world.) The architecture allows for different APIs to +simultaneously access the driver. I have a strong sense of fairness +about APIs and also feel that it is a good design principle to keep +implementation and interface isolated from each other. Thus while +right now the V4L high level interface is the most complete, the +sysfs high level interface will work equally well for similar +functions, and there's no reason I see right now why it shouldn't be +possible to produce a DVB high level interface that can sit right +alongside V4L. + +Building +-------- + +To build these modules essentially amounts to just running "Make", +but you need the kernel source tree nearby and you will likely also +want to set a few controlling environment variables first in order +to link things up with that source tree. Please see the Makefile +here for comments that explain how to do that. + +Source file list / functional overview +-------------------------------------- + +(Note: The term "module" used below generally refers to loosely +defined functional units within the pvrusb2 driver and bears no +relation to the Linux kernel's concept of a loadable module.) + +pvrusb2-audio.[ch] - This is glue logic that resides between this + driver and the msp3400.ko I2C client driver (which is found + elsewhere in V4L). + +pvrusb2-context.[ch] - This module implements the context for an + instance of the driver. Everything else eventually ties back to + or is otherwise instanced within the data structures implemented + here. Hotplugging is ultimately coordinated here. All high level + interfaces tie into the driver through this module. This module + helps arbitrate each interface's access to the actual driver core, + and is designed to allow concurrent access through multiple + instances of multiple interfaces (thus you can for example change + the tuner's frequency through sysfs while simultaneously streaming + video through V4L out to an instance of mplayer). + +pvrusb2-debug.h - This header defines a printk() wrapper and a mask + of debugging bit definitions for the various kinds of debug + messages that can be enabled within the driver. + +pvrusb2-debugifc.[ch] - This module implements a crude command line + oriented debug interface into the driver. Aside from being part + of the process for implementing manual firmware extraction (see + the pvrusb2 web site mentioned earlier), probably I'm the only one + who has ever used this. It is mainly a debugging aid. + +pvrusb2-eeprom.[ch] - This is glue logic that resides between this + driver the tveeprom.ko module, which is itself implemented + elsewhere in V4L. + +pvrusb2-encoder.[ch] - This module implements all protocol needed to + interact with the Conexant mpeg2 encoder chip within the pvrusb2 + device. It is a crude echo of corresponding logic in ivtv, + however the design goals (strict isolation) and physical layer + (proxy through USB instead of PCI) are enough different that this + implementation had to be completely different. + +pvrusb2-hdw-internal.h - This header defines the core data structure + in the driver used to track ALL internal state related to control + of the hardware. Nobody outside of the core hardware-handling + modules should have any business using this header. All external + access to the driver should be through one of the high level + interfaces (e.g. V4L, sysfs, etc), and in fact even those high + level interfaces are restricted to the API defined in + pvrusb2-hdw.h and NOT this header. + +pvrusb2-hdw.h - This header defines the full internal API for + controlling the hardware. High level interfaces (e.g. V4L, sysfs) + will work through here. + +pvrusb2-hdw.c - This module implements all the various bits of logic + that handle overall control of a specific pvrusb2 device. + (Policy, instantiation, and arbitration of pvrusb2 devices fall + within the jurisdiction of pvrusb-context not here). + +pvrusb2-i2c-chips-\*.c - These modules implement the glue logic to + tie together and configure various I2C modules as they attach to + the I2C bus. There are two versions of this file. The "v4l2" + version is intended to be used in-tree alongside V4L, where we + implement just the logic that makes sense for a pure V4L + environment. The "all" version is intended for use outside of + V4L, where we might encounter other possibly "challenging" modules + from ivtv or older kernel snapshots (or even the support modules + in the standalone snapshot). + +pvrusb2-i2c-cmd-v4l1.[ch] - This module implements generic V4L1 + compatible commands to the I2C modules. It is here where state + changes inside the pvrusb2 driver are translated into V4L1 + commands that are in turn send to the various I2C modules. + +pvrusb2-i2c-cmd-v4l2.[ch] - This module implements generic V4L2 + compatible commands to the I2C modules. It is here where state + changes inside the pvrusb2 driver are translated into V4L2 + commands that are in turn send to the various I2C modules. + +pvrusb2-i2c-core.[ch] - This module provides an implementation of a + kernel-friendly I2C adaptor driver, through which other external + I2C client drivers (e.g. msp3400, tuner, lirc) may connect and + operate corresponding chips within the pvrusb2 device. It is + through here that other V4L modules can reach into this driver to + operate specific pieces (and those modules are in turn driven by + glue logic which is coordinated by pvrusb2-hdw, doled out by + pvrusb2-context, and then ultimately made available to users + through one of the high level interfaces). + +pvrusb2-io.[ch] - This module implements a very low level ring of + transfer buffers, required in order to stream data from the + device. This module is *very* low level. It only operates the + buffers and makes no attempt to define any policy or mechanism for + how such buffers might be used. + +pvrusb2-ioread.[ch] - This module layers on top of pvrusb2-io.[ch] + to provide a streaming API usable by a read() system call style of + I/O. Right now this is the only layer on top of pvrusb2-io.[ch], + however the underlying architecture here was intended to allow for + other styles of I/O to be implemented with additional modules, like + mmap()'ed buffers or something even more exotic. + +pvrusb2-main.c - This is the top level of the driver. Module level + and USB core entry points are here. This is our "main". + +pvrusb2-sysfs.[ch] - This is the high level interface which ties the + pvrusb2 driver into sysfs. Through this interface you can do + everything with the driver except actually stream data. + +pvrusb2-tuner.[ch] - This is glue logic that resides between this + driver and the tuner.ko I2C client driver (which is found + elsewhere in V4L). + +pvrusb2-util.h - This header defines some common macros used + throughout the driver. These macros are not really specific to + the driver, but they had to go somewhere. + +pvrusb2-v4l2.[ch] - This is the high level interface which ties the + pvrusb2 driver into video4linux. It is through here that V4L + applications can open and operate the driver in the usual V4L + ways. Note that **ALL** V4L functionality is published only + through here and nowhere else. + +pvrusb2-video-\*.[ch] - This is glue logic that resides between this + driver and the saa711x.ko I2C client driver (which is found + elsewhere in V4L). Note that saa711x.ko used to be known as + saa7115.ko in ivtv. There are two versions of this; one is + selected depending on the particular saa711[5x].ko that is found. + +pvrusb2.h - This header contains compile time tunable parameters + (and at the moment the driver has very little that needs to be + tuned). diff --git a/Documentation/driver-api/media/drivers/pxa_camera.rst b/Documentation/driver-api/media/drivers/pxa_camera.rst new file mode 100644 index 0000000000..46919919ba --- /dev/null +++ b/Documentation/driver-api/media/drivers/pxa_camera.rst @@ -0,0 +1,194 @@ +.. SPDX-License-Identifier: GPL-2.0 + +PXA-Camera Host Driver +====================== + +Author: Robert Jarzmik + +Constraints +----------- + +a) Image size for YUV422P format + All YUV422P images are enforced to have width x height % 16 = 0. + This is due to DMA constraints, which transfers only planes of 8 byte + multiples. + + +Global video workflow +--------------------- + +a) QCI stopped + Initially, the QCI interface is stopped. + When a buffer is queued, start_streaming is called and the QCI starts. + +b) QCI started + More buffers can be queued while the QCI is started without halting the + capture. The new buffers are "appended" at the tail of the DMA chain, and + smoothly captured one frame after the other. + + Once a buffer is filled in the QCI interface, it is marked as "DONE" and + removed from the active buffers list. It can be then requeud or dequeued by + userland application. + + Once the last buffer is filled in, the QCI interface stops. + +c) Capture global finite state machine schema + +.. code-block:: none + + +----+ +---+ +----+ + | DQ | | Q | | DQ | + | v | v | v + +-----------+ +------------------------+ + | STOP | | Wait for capture start | + +-----------+ Q +------------------------+ + +-> | QCI: stop | ------------------> | QCI: run | <------------+ + | | DMA: stop | | DMA: stop | | + | +-----------+ +-----> +------------------------+ | + | / | | + | / +---+ +----+ | | + |capture list empty / | Q | | DQ | | QCI Irq EOF | + | / | v | v v | + | +--------------------+ +----------------------+ | + | | DMA hotlink missed | | Capture running | | + | +--------------------+ +----------------------+ | + | | QCI: run | +-----> | QCI: run | <-+ | + | | DMA: stop | / | DMA: run | | | + | +--------------------+ / +----------------------+ | Other | + | ^ /DMA still | | channels | + | | capture list / running | DMA Irq End | not | + | | not empty / | | finished | + | | / v | yet | + | +----------------------+ +----------------------+ | | + | | Videobuf released | | Channel completed | | | + | +----------------------+ +----------------------+ | | + +-- | QCI: run | | QCI: run | --+ | + | DMA: run | | DMA: run | | + +----------------------+ +----------------------+ | + ^ / | | + | no overrun / | overrun | + | / v | + +--------------------+ / +----------------------+ | + | Frame completed | / | Frame overran | | + +--------------------+ <-----+ +----------------------+ restart frame | + | QCI: run | | QCI: stop | --------------+ + | DMA: run | | DMA: stop | + +--------------------+ +----------------------+ + + Legend: - each box is a FSM state + - each arrow is the condition to transition to another state + - an arrow with a comment is a mandatory transition (no condition) + - arrow "Q" means : a buffer was enqueued + - arrow "DQ" means : a buffer was dequeued + - "QCI: stop" means the QCI interface is not enabled + - "DMA: stop" means all 3 DMA channels are stopped + - "DMA: run" means at least 1 DMA channel is still running + +DMA usage +--------- + +a) DMA flow + - first buffer queued for capture + Once a first buffer is queued for capture, the QCI is started, but data + transfer is not started. On "End Of Frame" interrupt, the irq handler + starts the DMA chain. + - capture of one videobuffer + The DMA chain starts transferring data into videobuffer RAM pages. + When all pages are transferred, the DMA irq is raised on "ENDINTR" status + - finishing one videobuffer + The DMA irq handler marks the videobuffer as "done", and removes it from + the active running queue + Meanwhile, the next videobuffer (if there is one), is transferred by DMA + - finishing the last videobuffer + On the DMA irq of the last videobuffer, the QCI is stopped. + +b) DMA prepared buffer will have this structure + +.. code-block:: none + + +------------+-----+---------------+-----------------+ + | desc-sg[0] | ... | desc-sg[last] | finisher/linker | + +------------+-----+---------------+-----------------+ + +This structure is pointed by dma->sg_cpu. +The descriptors are used as follows: + +- desc-sg[i]: i-th descriptor, transferring the i-th sg + element to the video buffer scatter gather +- finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN +- linker: has ddadr= desc-sg[0] of next video buffer, dcmd=0 + +For the next schema, let's assume d0=desc-sg[0] .. dN=desc-sg[N], +"f" stands for finisher and "l" for linker. +A typical running chain is : + +.. code-block:: none + + Videobuffer 1 Videobuffer 2 + +---------+----+---+ +----+----+----+---+ + | d0 | .. | dN | l | | d0 | .. | dN | f | + +---------+----+-|-+ ^----+----+----+---+ + | | + +----+ + +After the chaining is finished, the chain looks like : + +.. code-block:: none + + Videobuffer 1 Videobuffer 2 Videobuffer 3 + +---------+----+---+ +----+----+----+---+ +----+----+----+---+ + | d0 | .. | dN | l | | d0 | .. | dN | l | | d0 | .. | dN | f | + +---------+----+-|-+ ^----+----+----+-|-+ ^----+----+----+---+ + | | | | + +----+ +----+ + new_link + +c) DMA hot chaining timeslice issue + +As DMA chaining is done while DMA _is_ running, the linking may be done +while the DMA jumps from one Videobuffer to another. On the schema, that +would be a problem if the following sequence is encountered : + +- DMA chain is Videobuffer1 + Videobuffer2 +- pxa_videobuf_queue() is called to queue Videobuffer3 +- DMA controller finishes Videobuffer2, and DMA stops + +.. code-block:: none + + => + Videobuffer 1 Videobuffer 2 + +---------+----+---+ +----+----+----+---+ + | d0 | .. | dN | l | | d0 | .. | dN | f | + +---------+----+-|-+ ^----+----+----+-^-+ + | | | + +----+ +-- DMA DDADR loads DDADR_STOP + +- pxa_dma_add_tail_buf() is called, the Videobuffer2 "finisher" is + replaced by a "linker" to Videobuffer3 (creation of new_link) +- pxa_videobuf_queue() finishes +- the DMA irq handler is called, which terminates Videobuffer2 +- Videobuffer3 capture is not scheduled on DMA chain (as it stopped !!!) + +.. code-block:: none + + Videobuffer 1 Videobuffer 2 Videobuffer 3 + +---------+----+---+ +----+----+----+---+ +----+----+----+---+ + | d0 | .. | dN | l | | d0 | .. | dN | l | | d0 | .. | dN | f | + +---------+----+-|-+ ^----+----+----+-|-+ ^----+----+----+---+ + | | | | + +----+ +----+ + new_link + DMA DDADR still is DDADR_STOP + +- pxa_camera_check_link_miss() is called + This checks if the DMA is finished and a buffer is still on the + pcdev->capture list. If that's the case, the capture will be restarted, + and Videobuffer3 is scheduled on DMA chain. +- the DMA irq handler finishes + +.. note:: + + If DMA stops just after pxa_camera_check_link_miss() reads DDADR() + value, we have the guarantee that the DMA irq handler will be called back + when the DMA will finish the buffer, and pxa_camera_check_link_miss() will + be called again, to reschedule Videobuffer3. diff --git a/Documentation/driver-api/media/drivers/radiotrack.rst b/Documentation/driver-api/media/drivers/radiotrack.rst new file mode 100644 index 0000000000..a85cb6205d --- /dev/null +++ b/Documentation/driver-api/media/drivers/radiotrack.rst @@ -0,0 +1,168 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The Radiotrack radio driver +=========================== + +Author: Stephen M. Benoit + +Date: Dec 14, 1996 + +ACKNOWLEDGMENTS +---------------- + +This document was made based on 'C' code for Linux from Gideon le Grange +(legrang@active.co.za or legrang@cs.sun.ac.za) in 1994, and elaborations from +Frans Brinkman (brinkman@esd.nl) in 1996. The results reported here are from +experiments that the author performed on his own setup, so your mileage may +vary... I make no guarantees, claims or warranties to the suitability or +validity of this information. No other documentation on the AIMS +Lab (http://www.aimslab.com/) RadioTrack card was made available to the +author. This document is offered in the hopes that it might help users who +want to use the RadioTrack card in an environment other than MS Windows. + +WHY THIS DOCUMENT? +------------------ + +I have a RadioTrack card from back when I ran an MS-Windows platform. After +converting to Linux, I found Gideon le Grange's command-line software for +running the card, and found that it was good! Frans Brinkman made a +comfortable X-windows interface, and added a scanning feature. For hack +value, I wanted to see if the tuner could be tuned beyond the usual FM radio +broadcast band, so I could pick up the audio carriers from North American +broadcast TV channels, situated just below and above the 87.0-109.0 MHz range. +I did not get much success, but I learned about programming ioports under +Linux and gained some insights about the hardware design used for the card. + +So, without further delay, here are the details. + + +PHYSICAL DESCRIPTION +-------------------- + +The RadioTrack card is an ISA 8-bit FM radio card. The radio frequency (RF) +input is simply an antenna lead, and the output is a power audio signal +available through a miniature phone plug. Its RF frequencies of operation are +more or less limited from 87.0 to 109.0 MHz (the commercial FM broadcast +band). Although the registers can be programmed to request frequencies beyond +these limits, experiments did not give promising results. The variable +frequency oscillator (VFO) that demodulates the intermediate frequency (IF) +signal probably has a small range of useful frequencies, and wraps around or +gets clipped beyond the limits mentioned above. + + +CONTROLLING THE CARD WITH IOPORT +-------------------------------- + +The RadioTrack (base) ioport is configurable for 0x30c or 0x20c. Only one +ioport seems to be involved. The ioport decoding circuitry must be pretty +simple, as individual ioport bits are directly matched to specific functions +(or blocks) of the radio card. This way, many functions can be changed in +parallel with one write to the ioport. The only feedback available through +the ioports appears to be the "Stereo Detect" bit. + +The bits of the ioport are arranged as follows: + +.. code-block:: none + + MSb LSb + +------+------+------+--------+--------+-------+---------+--------+ + | VolA | VolB | ???? | Stereo | Radio | TuneA | TuneB | Tune | + | (+) | (-) | | Detect | Audio | (bit) | (latch) | Update | + | | | | Enable | Enable | | | Enable | + +------+------+------+--------+--------+-------+---------+--------+ + + +==== ==== ================================= +VolA VolB Description +==== ==== ================================= +0 0 audio mute +0 1 volume + (some delay required) +1 0 volume - (some delay required) +1 1 stay at present volume +==== ==== ================================= + +==================== =========== +Stereo Detect Enable Description +==================== =========== +0 No Detect +1 Detect +==================== =========== + +Results available by reading ioport >60 msec after last port write. + + 0xff ==> no stereo detected, 0xfd ==> stereo detected. + +============================= ============================= +Radio to Audio (path) Enable Description +============================= ============================= +0 Disable path (silence) +1 Enable path (audio produced) +============================= ============================= + +===== ===== ================== +TuneA TuneB Description +===== ===== ================== +0 0 "zero" bit phase 1 +0 1 "zero" bit phase 2 +1 0 "one" bit phase 1 +1 1 "one" bit phase 2 +===== ===== ================== + + +24-bit code, where bits = (freq*40) + 10486188. +The Most Significant 11 bits must be 1010 xxxx 0x0 to be valid. +The bits are shifted in LSb first. + +================== =========================== +Tune Update Enable Description +================== =========================== +0 Tuner held constant +1 Tuner updating in progress +================== =========================== + + +PROGRAMMING EXAMPLES +-------------------- + +.. code-block:: none + + Default: BASE <-- 0xc8 (current volume, no stereo detect, + radio enable, tuner adjust disable) + + Card Off: BASE <-- 0x00 (audio mute, no stereo detect, + radio disable, tuner adjust disable) + + Card On: BASE <-- 0x00 (see "Card Off", clears any unfinished business) + BASE <-- 0xc8 (see "Default") + + Volume Down: BASE <-- 0x48 (volume down, no stereo detect, + radio enable, tuner adjust disable) + wait 10 msec + BASE <-- 0xc8 (see "Default") + + Volume Up: BASE <-- 0x88 (volume up, no stereo detect, + radio enable, tuner adjust disable) + wait 10 msec + BASE <-- 0xc8 (see "Default") + + Check Stereo: BASE <-- 0xd8 (current volume, stereo detect, + radio enable, tuner adjust disable) + wait 100 msec + x <-- BASE (read ioport) + BASE <-- 0xc8 (see "Default") + + x=0xff ==> "not stereo", x=0xfd ==> "stereo detected" + + Set Frequency: code = (freq*40) + 10486188 + foreach of the 24 bits in code, + (from Least to Most Significant): + to write a "zero" bit, + BASE <-- 0x01 (audio mute, no stereo detect, radio + disable, "zero" bit phase 1, tuner adjust) + BASE <-- 0x03 (audio mute, no stereo detect, radio + disable, "zero" bit phase 2, tuner adjust) + to write a "one" bit, + BASE <-- 0x05 (audio mute, no stereo detect, radio + disable, "one" bit phase 1, tuner adjust) + BASE <-- 0x07 (audio mute, no stereo detect, radio + disable, "one" bit phase 2, tuner adjust) diff --git a/Documentation/driver-api/media/drivers/rkisp1.rst b/Documentation/driver-api/media/drivers/rkisp1.rst new file mode 100644 index 0000000000..ea336958a3 --- /dev/null +++ b/Documentation/driver-api/media/drivers/rkisp1.rst @@ -0,0 +1,43 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The Rockchip Image Signal Processor Driver (rkisp1) +=================================================== + +Versions and their differences +------------------------------ + +The rkisp1 block underwent some changes between SoC implementations. +The vendor designates them as: + +- V10: used at least in rk3288 and rk3399 +- V11: declared in the original vendor code, but not used +- V12: used at least in rk3326 and px30 +- V13: used at least in rk1808 +- V20: used in rk3568 and beyond + +Right now the kernel supports rkisp1 implementations based +on V10 and V12 variants. V11 does not seem to be actually used +and V13 will need some more additions but isn't researched yet, +especially as it seems to be limited to the rk1808 which hasn't +reached much market spread. + +V20 on the other hand will probably be used in future SoCs and +has seen really big changes in the vendor kernel, so will need +quite a bit of research. + +Changes from V10 to V12 +----------------------- + +- V12 supports a new CSI-host implementation but can still + also use the same implementation from V10 +- The module for lens shading correction got changed + from 12bit to 13bit width +- The AWB and AEC modules got replaced to support finer + grained data collection + +Changes from V12 to V13 +----------------------- + +The list for V13 is incomplete and needs further investigation. + +- V13 does not support the old CSI-host implementation anymore diff --git a/Documentation/driver-api/media/drivers/saa7134-devel.rst b/Documentation/driver-api/media/drivers/saa7134-devel.rst new file mode 100644 index 0000000000..167fd729bc --- /dev/null +++ b/Documentation/driver-api/media/drivers/saa7134-devel.rst @@ -0,0 +1,67 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The saa7134 driver +================== + +Author Gerd Hoffmann + + +Card Variations: +---------------- + +Cards can use either of these two crystals (xtal): + +- 32.11 MHz -> .audio_clock=0x187de7 +- 24.576MHz -> .audio_clock=0x200000 (xtal * .audio_clock = 51539600) + +Some details about 30/34/35: + +- saa7130 - low-price chip, doesn't have mute, that is why all those + cards should have .mute field defined in their tuner structure. + +- saa7134 - usual chip + +- saa7133/35 - saa7135 is probably a marketing decision, since all those + chips identifies itself as 33 on pci. + +LifeView GPIOs +-------------- + +This section was authored by: Peter Missel + +- LifeView FlyTV Platinum FM (LR214WF) + + - GP27 MDT2005 PB4 pin 10 + - GP26 MDT2005 PB3 pin 9 + - GP25 MDT2005 PB2 pin 8 + - GP23 MDT2005 PB1 pin 7 + - GP22 MDT2005 PB0 pin 6 + - GP21 MDT2005 PB5 pin 11 + - GP20 MDT2005 PB6 pin 12 + - GP19 MDT2005 PB7 pin 13 + - nc MDT2005 PA3 pin 2 + - Remote MDT2005 PA2 pin 1 + - GP18 MDT2005 PA1 pin 18 + - nc MDT2005 PA0 pin 17 strap low + - GP17 Strap "GP7"=High + - GP16 Strap "GP6"=High + + - 0=Radio 1=TV + - Drives SA630D ENCH1 and HEF4052 A1 pinsto do FM radio through + SIF input + + - GP15 nc + - GP14 nc + - GP13 nc + - GP12 Strap "GP5" = High + - GP11 Strap "GP4" = High + - GP10 Strap "GP3" = High + - GP09 Strap "GP2" = Low + - GP08 Strap "GP1" = Low + - GP07.00 nc + +Credits +------- + +andrew.stevens@philips.com + werner.leeb@philips.com for providing +saa7134 hardware specs and sample board. diff --git a/Documentation/driver-api/media/drivers/sh_mobile_ceu_camera.rst b/Documentation/driver-api/media/drivers/sh_mobile_ceu_camera.rst new file mode 100644 index 0000000000..822fcb8368 --- /dev/null +++ b/Documentation/driver-api/media/drivers/sh_mobile_ceu_camera.rst @@ -0,0 +1,142 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Cropping and Scaling algorithm, used in the sh_mobile_ceu_camera driver +======================================================================= + +Author: Guennadi Liakhovetski + +Terminology +----------- + +sensor scales: horizontal and vertical scales, configured by the sensor driver +host scales: -"- host driver +combined scales: sensor_scale * host_scale + + +Generic scaling / cropping scheme +--------------------------------- + +.. code-block:: none + + -1-- + | + -2-- -\ + | --\ + | --\ + +-5-- . -- -3-- -\ + | `... -\ + | `... -4-- . - -7.. + | `. + | `. .6-- + | + | . .6'- + | .´ + | ... -4'- .´ + | ...´ - -7'. + +-5'- .´ -/ + | -- -3'- -/ + | --/ + | --/ + -2'- -/ + | + | + -1'- + +In the above chart minuses and slashes represent "real" data amounts, points and +accents represent "useful" data, basically, CEU scaled and cropped output, +mapped back onto the client's source plane. + +Such a configuration can be produced by user requests: + +S_CROP(left / top = (5) - (1), width / height = (5') - (5)) +S_FMT(width / height = (6') - (6)) + +Here: + +(1) to (1') - whole max width or height +(1) to (2) - sensor cropped left or top +(2) to (2') - sensor cropped width or height +(3) to (3') - sensor scale +(3) to (4) - CEU cropped left or top +(4) to (4') - CEU cropped width or height +(5) to (5') - reverse sensor scale applied to CEU cropped width or height +(2) to (5) - reverse sensor scale applied to CEU cropped left or top +(6) to (6') - CEU scale - user window + + +S_FMT +----- + +Do not touch input rectangle - it is already optimal. + +1. Calculate current sensor scales: + + scale_s = ((2') - (2)) / ((3') - (3)) + +2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at +current sensor scales onto input window - this is user S_CROP: + + width_u = (5') - (5) = ((4') - (4)) * scale_s + +3. Calculate new combined scales from "effective" input window to requested user +window: + + scale_comb = width_u / ((6') - (6)) + +4. Calculate sensor output window by applying combined scales to real input +window: + + width_s_out = ((7') - (7)) = ((2') - (2)) / scale_comb + +5. Apply iterative sensor S_FMT for sensor output window. + + subdev->video_ops->s_fmt(.width = width_s_out) + +6. Retrieve sensor output window (g_fmt) + +7. Calculate new sensor scales: + + scale_s_new = ((3')_new - (3)_new) / ((2') - (2)) + +8. Calculate new CEU crop - apply sensor scales to previously calculated +"effective" crop: + + width_ceu = (4')_new - (4)_new = width_u / scale_s_new + left_ceu = (4)_new - (3)_new = ((5) - (2)) / scale_s_new + +9. Use CEU cropping to crop to the new window: + + ceu_crop(.width = width_ceu, .left = left_ceu) + +10. Use CEU scaling to scale to the requested user window: + + scale_ceu = width_ceu / width + + +S_CROP +------ + +The :ref:`V4L2 crop API ` says: + +"...specification does not define an origin or units. However by convention +drivers should horizontally count unscaled samples relative to 0H." + +We choose to follow the advise and interpret cropping units as client input +pixels. + +Cropping is performed in the following 6 steps: + +1. Request exactly user rectangle from the sensor. + +2. If smaller - iterate until a larger one is obtained. Result: sensor cropped + to 2 : 2', target crop 5 : 5', current output format 6' - 6. + +3. In the previous step the sensor has tried to preserve its output frame as + good as possible, but it could have changed. Retrieve it again. + +4. Sensor scaled to 3 : 3'. Sensor's scale is (2' - 2) / (3' - 3). Calculate + intermediate window: 4' - 4 = (5' - 5) * (3' - 3) / (2' - 2) + +5. Calculate and apply host scale = (6' - 6) / (4' - 4) + +6. Calculate and apply host crop: 6 - 7 = (5 - 2) * (6' - 6) / (5' - 5) diff --git a/Documentation/driver-api/media/drivers/tuners.rst b/Documentation/driver-api/media/drivers/tuners.rst new file mode 100644 index 0000000000..d7924141c5 --- /dev/null +++ b/Documentation/driver-api/media/drivers/tuners.rst @@ -0,0 +1,133 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Tuner drivers +============= + +Simple tuner Programming +------------------------ + +There are some flavors of Tuner programming APIs. +These differ mainly by the bandswitch byte. + +- L= LG_API (VHF_LO=0x01, VHF_HI=0x02, UHF=0x08, radio=0x04) +- P= PHILIPS_API (VHF_LO=0xA0, VHF_HI=0x90, UHF=0x30, radio=0x04) +- T= TEMIC_API (VHF_LO=0x02, VHF_HI=0x04, UHF=0x01) +- A= ALPS_API (VHF_LO=0x14, VHF_HI=0x12, UHF=0x11) +- M= PHILIPS_MK3 (VHF_LO=0x01, VHF_HI=0x02, UHF=0x04, radio=0x19) + +Tuner Manufacturers +------------------- + +- Samsung Tuner identification: (e.g. TCPM9091PD27) + +.. code-block:: none + + TCP [ABCJLMNQ] 90[89][125] [DP] [ACD] 27 [ABCD] + [ABCJLMNQ]: + A= BG+DK + B= BG + C= I+DK + J= NTSC-Japan + L= Secam LL + M= BG+I+DK + N= NTSC + Q= BG+I+DK+LL + [89]: ? + [125]: + 2: No FM + 5: With FM + [DP]: + D= NTSC + P= PAL + [ACD]: + A= F-connector + C= Phono connector + D= Din Jack + [ABCD]: + 3-wire/I2C tuning, 2-band/3-band + +These Tuners are PHILIPS_API compatible. + +Philips Tuner identification: (e.g. FM1216MF) + +.. code-block:: none + + F[IRMQ]12[1345]6{MF|ME|MP} + F[IRMQ]: + FI12x6: Tuner Series + FR12x6: Tuner + Radio IF + FM12x6: Tuner + FM + FQ12x6: special + FMR12x6: special + TD15xx: Digital Tuner ATSC + 12[1345]6: + 1216: PAL BG + 1236: NTSC + 1246: PAL I + 1256: Pal DK + {MF|ME|MP} + MF: BG LL w/ Secam (Multi France) + ME: BG DK I LL (Multi Europe) + MP: BG DK I (Multi PAL) + MR: BG DK M (?) + MG: BG DKI M (?) + MK2 series PHILIPS_API, most tuners are compatible to this one ! + MK3 series introduced in 2002 w/ PHILIPS_MK3_API + +Temic Tuner identification: (.e.g 4006FH5) + +.. code-block:: none + + 4[01][0136][269]F[HYNR]5 + 40x2: Tuner (5V/33V), TEMIC_API. + 40x6: Tuner 5V + 41xx: Tuner compact + 40x9: Tuner+FM compact + [0136] + xx0x: PAL BG + xx1x: Pal DK, Secam LL + xx3x: NTSC + xx6x: PAL I + F[HYNR]5 + FH5: Pal BG + FY5: others + FN5: multistandard + FR5: w/ FM radio + 3X xxxx: order number with specific connector + Note: Only 40x2 series has TEMIC_API, all newer tuners have PHILIPS_API. + +LG Innotek Tuner: + +- TPI8NSR11 : NTSC J/M (TPI8NSR01 w/FM) (P,210/497) +- TPI8PSB11 : PAL B/G (TPI8PSB01 w/FM) (P,170/450) +- TAPC-I701 : PAL I (TAPC-I001 w/FM) (P,170/450) +- TPI8PSB12 : PAL D/K+B/G (TPI8PSB02 w/FM) (P,170/450) +- TAPC-H701P: NTSC_JP (TAPC-H001P w/FM) (L,170/450) +- TAPC-G701P: PAL B/G (TAPC-G001P w/FM) (L,170/450) +- TAPC-W701P: PAL I (TAPC-W001P w/FM) (L,170/450) +- TAPC-Q703P: PAL D/K (TAPC-Q001P w/FM) (L,170/450) +- TAPC-Q704P: PAL D/K+I (L,170/450) +- TAPC-G702P: PAL D/K+B/G (L,170/450) + +- TADC-H002F: NTSC (L,175/410?; 2-B, C-W+11, W+12-69) +- TADC-M201D: PAL D/K+B/G+I (L,143/425) (sound control at I2C address 0xc8) +- TADC-T003F: NTSC Taiwan (L,175/410?; 2-B, C-W+11, W+12-69) + +Suffix: + - P= Standard phono female socket + - D= IEC female socket + - F= F-connector + +Other Tuners: + +- TCL2002MB-1 : PAL BG + DK =TUNER_LG_PAL_NEW_TAPC +- TCL2002MB-1F: PAL BG + DK w/FM =PHILIPS_PAL +- TCL2002MI-2 : PAL I = ?? + +ALPS Tuners: + +- Most are LG_API compatible +- TSCH6 has ALPS_API (TSCH5 ?) +- TSBE1 has extra API 05,02,08 Control_byte=0xCB Source:[#f1]_ + +.. [#f1] conexant100029b-PCI-Decoder-ApplicationNote.pdf diff --git a/Documentation/driver-api/media/drivers/vidtv.rst b/Documentation/driver-api/media/drivers/vidtv.rst new file mode 100644 index 0000000000..54f269f478 --- /dev/null +++ b/Documentation/driver-api/media/drivers/vidtv.rst @@ -0,0 +1,513 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================ +vidtv: Virtual Digital TV driver +================================ + +Author: Daniel W. S. Almeida , June 2020. + +Background +---------- + +Vidtv is a virtual DVB driver that aims to serve as a reference for driver +writers by serving as a template. It also validates the existing media DVB +APIs, thus helping userspace application writers. + +Currently, it consists of: + +- A fake tuner driver, which will report a bad signal quality if the chosen + frequency is too far away from a table of valid frequencies for a + particular delivery system. + +- A fake demod driver, which will constantly poll the fake signal quality + returned by the tuner, simulating a device that can lose/reacquire a lock + on the signal depending on the CNR levels. + +- A fake bridge driver, which is the module responsible for modprobing the + fake tuner and demod modules and implementing the demux logic. This module + takes parameters at initialization that will dictate how the simulation + behaves. + +- Code responsible for encoding a valid MPEG Transport Stream, which is then + passed to the bridge driver. This fake stream contains some hardcoded content. + For now, we have a single, audio-only channel containing a single MPEG + Elementary Stream, which in turn contains a SMPTE 302m encoded sine-wave. + Note that this particular encoder was chosen because it is the easiest + way to encode PCM audio data in a MPEG Transport Stream. + +Building vidtv +-------------- +vidtv is a test driver and thus is **not** enabled by default when +compiling the kernel. + +In order to enable compilation of vidtv: + +- Enable **DVB_TEST_DRIVERS**, then +- Enable **DVB_VIDTV** + +When compiled as a module, expect the following .ko files: + +- dvb_vidtv_tuner.ko + +- dvb_vidtv_demod.ko + +- dvb_vidtv_bridge.ko + +Running vidtv +------------- +When compiled as a module, run:: + + modprobe vidtv + +That's it! The bridge driver will initialize the tuner and demod drivers as +part of its own initialization. + +By default, it will accept the following frequencies: + + - 474 MHz for DVB-T/T2/C; + - 11,362 GHz for DVB-S/S2. + +For satellite systems, the driver simulates an universal extended +LNBf, with frequencies at Ku-Band, ranging from 10.7 GHz to 12.75 GHz. + +You can optionally define some command-line arguments to vidtv. + +Command-line arguments to vidtv +------------------------------- +Below is a list of all arguments that can be supplied to vidtv: + +drop_tslock_prob_on_low_snr + Probability of losing the TS lock if the signal quality is bad. + This probability be used by the fake demodulator driver to + eventually return a status of 0 when the signal quality is not + good. + +recover_tslock_prob_on_good_snr: + Probability recovering the TS lock when the signal improves. This + probability be used by the fake demodulator driver to eventually + return a status of 0x1f when/if the signal quality improves. + +mock_power_up_delay_msec + Simulate a power up delay. Default: 0. + +mock_tune_delay_msec + Simulate a tune delay. Default 0. + +vidtv_valid_dvb_t_freqs + Valid DVB-T frequencies to simulate, in Hz. + +vidtv_valid_dvb_c_freqs + Valid DVB-C frequencies to simulate, in Hz. + +vidtv_valid_dvb_s_freqs + Valid DVB-S/S2 frequencies to simulate at Ku-Band, in kHz. + +max_frequency_shift_hz, + Maximum shift in HZ allowed when tuning in a channel. + +si_period_msec + How often to send SI packets. Default: 40ms. + +pcr_period_msec + How often to send PCR packets. Default: 40ms. + +mux_rate_kbytes_sec + Attempt to maintain this bit rate by inserting TS null packets, if + necessary. Default: 4096. + +pcr_pid, + PCR PID for all channels. Default: 0x200. + +mux_buf_sz_pkts, + Size for the mux buffer in multiples of 188 bytes. + +vidtv internal structure +------------------------ +The kernel modules are split in the following way: + +vidtv_tuner.[ch] + Implements a fake tuner DVB driver. + +vidtv_demod.[ch] + Implements a fake demodulator DVB driver. + +vidtv_bridge.[ch] + Implements a bridge driver. + +The MPEG related code is split in the following way: + +vidtv_ts.[ch] + Code to work with MPEG TS packets, such as TS headers, adaptation + fields, PCR packets and NULL packets. + +vidtv_psi.[ch] + This is the PSI generator. PSI packets contain general information + about a MPEG Transport Stream. A PSI generator is needed so + userspace apps can retrieve information about the Transport Stream + and eventually tune into a (dummy) channel. + + Because the generator is implemented in a separate file, it can be + reused elsewhere in the media subsystem. + + Currently vidtv supports working with 5 PSI tables: PAT, PMT, + SDT, NIT and EIT. + + The specification for PAT and PMT can be found in *ISO 13818-1: + Systems*, while the specification for the SDT, NIT, EIT can be found in *ETSI + EN 300 468: Specification for Service Information (SI) in DVB + systems*. + + It isn't strictly necessary, but using a real TS file helps when + debugging PSI tables. Vidtv currently tries to replicate the PSI + structure found in this file: `TS1Globo.ts + `_. + + A good way to visualize the structure of streams is by using + `DVBInspector `_. + +vidtv_pes.[ch] + Implements the PES logic to convert encoder data into MPEG TS + packets. These can then be fed into a TS multiplexer and eventually + into userspace. + +vidtv_encoder.h + An interface for vidtv encoders. New encoders can be added to this + driver by implementing the calls in this file. + +vidtv_s302m.[ch] + Implements a S302M encoder to make it possible to insert PCM audio + data in the generated MPEG Transport Stream. The relevant + specification is available online as *SMPTE 302M-2007: Television - + Mapping of AES3 Data into MPEG-2 Transport Stream*. + + + The resulting MPEG Elementary Stream is conveyed in a private + stream with a S302M registration descriptor attached. + + This shall enable passing an audio signal into userspace so it can + be decoded and played by media software. The corresponding decoder + in ffmpeg is located in 'libavcodec/s302m.c' and is experimental. + +vidtv_channel.[ch] + Implements a 'channel' abstraction. + + When vidtv boots, it will create some hardcoded channels: + + #. Their services will be concatenated to populate the SDT. + + #. Their programs will be concatenated to populate the PAT + + #. Their events will be concatenated to populate the EIT + + #. For each program in the PAT, a PMT section will be created + + #. The PMT section for a channel will be assigned its streams. + + #. Every stream will have its corresponding encoder polled in a + loop to produce TS packets. + These packets may be interleaved by the muxer and then delivered + to the bridge. + +vidtv_mux.[ch] + Implements a MPEG TS mux, loosely based on the ffmpeg + implementation in "libavcodec/mpegtsenc.c" + + The muxer runs a loop which is responsible for: + + #. Keeping track of the amount of time elapsed since the last + iteration. + + #. Polling encoders in order to fetch 'elapsed_time' worth of data. + + #. Inserting PSI and/or PCR packets, if needed. + + #. Padding the resulting stream with NULL packets if + necessary in order to maintain the chosen bit rate. + + #. Delivering the resulting TS packets to the bridge + driver so it can pass them to the demux. + +Testing vidtv with v4l-utils +---------------------------- + +Using the tools in v4l-utils is a great way to test and inspect the output of +vidtv. It is hosted here: `v4l-utils Documentation +`_. + +From its webpage:: + + The v4l-utils are a series of packages for handling media devices. + + It is hosted at http://git.linuxtv.org/v4l-utils.git, and packaged + on most distributions. + + It provides a series of libraries and utilities to be used to + control several aspect of the media boards. + + +Start by installing v4l-utils and then modprobing vidtv:: + + modprobe dvb_vidtv_bridge + +If the driver is OK, it should load and its probing code will run. This will +pull in the tuner and demod drivers. + +Using dvb-fe-tool +~~~~~~~~~~~~~~~~~ + +The first step to check whether the demod loaded successfully is to run:: + + $ dvb-fe-tool + Device Dummy demod for DVB-T/T2/C/S/S2 (/dev/dvb/adapter0/frontend0) capabilities: + CAN_FEC_1_2 + CAN_FEC_2_3 + CAN_FEC_3_4 + CAN_FEC_4_5 + CAN_FEC_5_6 + CAN_FEC_6_7 + CAN_FEC_7_8 + CAN_FEC_8_9 + CAN_FEC_AUTO + CAN_GUARD_INTERVAL_AUTO + CAN_HIERARCHY_AUTO + CAN_INVERSION_AUTO + CAN_QAM_16 + CAN_QAM_32 + CAN_QAM_64 + CAN_QAM_128 + CAN_QAM_256 + CAN_QAM_AUTO + CAN_QPSK + CAN_TRANSMISSION_MODE_AUTO + DVB API Version 5.11, Current v5 delivery system: DVBC/ANNEX_A + Supported delivery systems: + DVBT + DVBT2 + [DVBC/ANNEX_A] + DVBS + DVBS2 + Frequency range for the current standard: + From: 51.0 MHz + To: 2.15 GHz + Step: 62.5 kHz + Tolerance: 29.5 MHz + Symbol rate ranges for the current standard: + From: 1.00 MBauds + To: 45.0 MBauds + +This should return what is currently set up at the demod struct, i.e.:: + + static const struct dvb_frontend_ops vidtv_demod_ops = { + .delsys = { + SYS_DVBT, + SYS_DVBT2, + SYS_DVBC_ANNEX_A, + SYS_DVBS, + SYS_DVBS2, + }, + + .info = { + .name = "Dummy demod for DVB-T/T2/C/S/S2", + .frequency_min_hz = 51 * MHz, + .frequency_max_hz = 2150 * MHz, + .frequency_stepsize_hz = 62500, + .frequency_tolerance_hz = 29500 * kHz, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + + .caps = FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_8_9 | + FE_CAN_QAM_16 | + FE_CAN_QAM_64 | + FE_CAN_QAM_32 | + FE_CAN_QAM_128 | + FE_CAN_QAM_256 | + FE_CAN_QAM_AUTO | + FE_CAN_QPSK | + FE_CAN_FEC_AUTO | + FE_CAN_INVERSION_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO, + } + + .... + +For more information on dvb-fe-tools check its online documentation here: +`dvb-fe-tool Documentation +`_. + +Using dvb-scan +~~~~~~~~~~~~~~ + +In order to tune into a channel and read the PSI tables, we can use dvb-scan. + +For this, one should provide a configuration file known as a 'scan file', +here's an example:: + + [Channel] + FREQUENCY = 474000000 + MODULATION = QAM/AUTO + SYMBOL_RATE = 6940000 + INNER_FEC = AUTO + DELIVERY_SYSTEM = DVBC/ANNEX_A + +.. note:: + The parameters depend on the video standard you're testing. + +.. note:: + Vidtv is a fake driver and does not validate much of the information + in the scan file. Just specifying 'FREQUENCY' and 'DELIVERY_SYSTEM' + should be enough for DVB-T/DVB-T2. For DVB-S/DVB-C however, you + should also provide 'SYMBOL_RATE'. + +You can browse scan tables online here: `dvb-scan-tables +`_. + +Assuming this channel is named 'channel.conf', you can then run:: + + $ dvbv5-scan channel.conf + dvbv5-scan ~/vidtv.conf + ERROR command BANDWIDTH_HZ (5) not found during retrieve + Cannot calc frequency shift. Either bandwidth/symbol-rate is unavailable (yet). + Scanning frequency #1 330000000 + (0x00) Signal= -68.00dBm + Scanning frequency #2 474000000 + Lock (0x1f) Signal= -34.45dBm C/N= 33.74dB UCB= 0 + Service Beethoven, provider LinuxTV.org: digital television + +For more information on dvb-scan, check its documentation online here: +`dvb-scan Documentation `_. + +Using dvb-zap +~~~~~~~~~~~~~ + +dvbv5-zap is a command line tool that can be used to record MPEG-TS to disk. The +typical use is to tune into a channel and put it into record mode. The example +below - which is taken from the documentation - illustrates that\ [1]_:: + + $ dvbv5-zap -c dvb_channel.conf "beethoven" -o music.ts -P -t 10 + using demux 'dvb0.demux0' + reading channels from file 'dvb_channel.conf' + tuning to 474000000 Hz + pass all PID's to TS + dvb_set_pesfilter 8192 + dvb_dev_set_bufsize: buffer set to 6160384 + Lock (0x1f) Quality= Good Signal= -34.66dBm C/N= 33.41dB UCB= 0 postBER= 0 preBER= 1.05x10^-3 PER= 0 + Lock (0x1f) Quality= Good Signal= -34.57dBm C/N= 33.46dB UCB= 0 postBER= 0 preBER= 1.05x10^-3 PER= 0 + Record to file 'music.ts' started + received 24587768 bytes (2401 Kbytes/sec) + Lock (0x1f) Quality= Good Signal= -34.42dBm C/N= 33.89dB UCB= 0 postBER= 0 preBER= 2.44x10^-3 PER= 0 + +.. [1] In this example, it records 10 seconds with all program ID's stored + at the music.ts file. + + +The channel can be watched by playing the contents of the stream with some +player that recognizes the MPEG-TS format, such as ``mplayer`` or ``vlc``. + +By playing the contents of the stream one can visually inspect the workings of +vidtv, e.g., to play a recorded TS file with:: + + $ mplayer music.ts + +or, alternatively, running this command on one terminal:: + + $ dvbv5-zap -c dvb_channel.conf "beethoven" -P -r & + +And, on a second terminal, playing the contents from DVR interface with:: + + $ mplayer /dev/dvb/adapter0/dvr0 + +For more information on dvb-zap check its online documentation here: +`dvb-zap Documentation +`_. +See also: `zap `_. + + +What can still be improved in vidtv +----------------------------------- + +Add *debugfs* integration +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Although frontend drivers provide DVBv5 statistics via the .read_status +call, a nice addition would be to make additional statistics available to +userspace via debugfs, which is a simple-to-use, RAM-based filesystem +specifically designed for debug purposes. + +The logic for this would be implemented on a separate file so as not to +pollute the frontend driver. These statistics are driver-specific and can +be useful during tests. + +The Siano driver is one example of a driver using +debugfs to convey driver-specific statistics to userspace and it can be +used as a reference. + +This should be further enabled and disabled via a Kconfig +option for convenience. + +Add a way to test video +~~~~~~~~~~~~~~~~~~~~~~~ + +Currently, vidtv can only encode PCM audio. It would be great to implement +a barebones version of MPEG-2 video encoding so we can also test video. The +first place to look into is *ISO 13818-2: Information technology — Generic +coding of moving pictures and associated audio information — Part 2: Video*, +which covers the encoding of compressed video in MPEG Transport Streams. + +This might optionally use the Video4Linux2 Test Pattern Generator, v4l2-tpg, +which resides at:: + + drivers/media/common/v4l2-tpg/ + + +Add white noise simulation +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The vidtv tuner already has code to identify whether the chosen frequency +is too far away from a table of valid frequencies. For now, this means that +the demodulator can eventually lose the lock on the signal, since the tuner will +report a bad signal quality. + +A nice addition is to simulate some noise when the signal quality is bad by: + +- Randomly dropping some TS packets. This will trigger a continuity error if the + continuity counter is updated but the packet is not passed on to the demux. + +- Updating the error statistics accordingly (e.g. BER, etc). + +- Simulating some noise in the encoded data. + +Functions and structs used within vidtv +--------------------------------------- + +.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_bridge.h + +.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_channel.h + +.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_demod.h + +.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_encoder.h + +.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_mux.h + +.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_pes.h + +.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_psi.h + +.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_s302m.h + +.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_ts.h + +.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_tuner.h + +.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_common.c + +.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_tuner.c diff --git a/Documentation/driver-api/media/drivers/vimc-devel.rst b/Documentation/driver-api/media/drivers/vimc-devel.rst new file mode 100644 index 0000000000..9e984f914b --- /dev/null +++ b/Documentation/driver-api/media/drivers/vimc-devel.rst @@ -0,0 +1,15 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The Virtual Media Controller Driver (vimc) +========================================== + +Source code documentation +------------------------- + +vimc-streamer +~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/media/test-drivers/vimc/vimc-streamer.h + :internal: + +.. kernel-doc:: drivers/media/test-drivers/vimc/vimc-streamer.c diff --git a/Documentation/driver-api/media/drivers/zoran.rst b/Documentation/driver-api/media/drivers/zoran.rst new file mode 100644 index 0000000000..b205e10c31 --- /dev/null +++ b/Documentation/driver-api/media/drivers/zoran.rst @@ -0,0 +1,575 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The Zoran driver +================ + +unified zoran driver (zr360x7, zoran, buz, dc10(+), dc30(+), lml33) + +website: http://mjpeg.sourceforge.net/driver-zoran/ + + +Frequently Asked Questions +-------------------------- + +What cards are supported +------------------------ + +Iomega Buz, Linux Media Labs LML33/LML33R10, Pinnacle/Miro +DC10/DC10+/DC30/DC30+ and related boards (available under various names). + +Iomega Buz +~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36060 MJPEG codec +* Philips saa7111 TV decoder +* Philips saa7185 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, saa7111, saa7185, zr36060, zr36067 + +Inputs/outputs: Composite and S-video + +Norms: PAL, SECAM (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps) + +Card number: 7 + +AverMedia 6 Eyes AVS6EYES +~~~~~~~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36060 MJPEG codec +* Samsung ks0127 TV decoder +* Conexant bt866 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, ks0127, bt866, zr36060, zr36067 + +Inputs/outputs: + Six physical inputs. 1-6 are composite, + 1-2, 3-4, 5-6 doubles as S-video, + 1-3 triples as component. + One composite output. + +Norms: PAL, SECAM (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps) + +Card number: 8 + +.. note:: + + Not autodetected, card=8 is necessary. + +Linux Media Labs LML33 +~~~~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36060 MJPEG codec +* Brooktree bt819 TV decoder +* Brooktree bt856 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, bt819, bt856, zr36060, zr36067 + +Inputs/outputs: Composite and S-video + +Norms: PAL (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps) + +Card number: 5 + +Linux Media Labs LML33R10 +~~~~~~~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36060 MJPEG codec +* Philips saa7114 TV decoder +* Analog Devices adv7170 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, saa7114, adv7170, zr36060, zr36067 + +Inputs/outputs: Composite and S-video + +Norms: PAL (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps) + +Card number: 6 + +Pinnacle/Miro DC10(new) +~~~~~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36057 PCI controller +* Zoran zr36060 MJPEG codec +* Philips saa7110a TV decoder +* Analog Devices adv7176 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, saa7110, adv7175, zr36060, zr36067 + +Inputs/outputs: Composite, S-video and Internal + +Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps) + +Card number: 1 + +Pinnacle/Miro DC10+ +~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36060 MJPEG codec +* Philips saa7110a TV decoder +* Analog Devices adv7176 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, saa7110, adv7175, zr36060, zr36067 + +Inputs/outputs: Composite, S-video and Internal + +Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps) + +Card number: 2 + +Pinnacle/Miro DC10(old) +~~~~~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36057 PCI controller +* Zoran zr36050 MJPEG codec +* Zoran zr36016 Video Front End or Fuji md0211 Video Front End (clone?) +* Micronas vpx3220a TV decoder +* mse3000 TV encoder or Analog Devices adv7176 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, vpx3220, mse3000/adv7175, zr36050, zr36016, zr36067 + +Inputs/outputs: Composite, S-video and Internal + +Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps) + +Card number: 0 + +Pinnacle/Miro DC30 +~~~~~~~~~~~~~~~~~~ + +* Zoran zr36057 PCI controller +* Zoran zr36050 MJPEG codec +* Zoran zr36016 Video Front End +* Micronas vpx3225d/vpx3220a/vpx3216b TV decoder +* Analog Devices adv7176 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, vpx3220/vpx3224, adv7175, zr36050, zr36016, zr36067 + +Inputs/outputs: Composite, S-video and Internal + +Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps) + +Card number: 3 + +Pinnacle/Miro DC30+ +~~~~~~~~~~~~~~~~~~~ + +* Zoran zr36067 PCI controller +* Zoran zr36050 MJPEG codec +* Zoran zr36016 Video Front End +* Micronas vpx3225d/vpx3220a/vpx3216b TV decoder +* Analog Devices adv7176 TV encoder + +Drivers to use: videodev, i2c-core, i2c-algo-bit, +videocodec, vpx3220/vpx3224, adv7175, zr36050, zr36015, zr36067 + +Inputs/outputs: Composite, S-video and Internal + +Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps) + +Card number: 4 + +.. note:: + + #) No module for the mse3000 is available yet + #) No module for the vpx3224 is available yet + +1.1 What the TV decoder can do an what not +------------------------------------------ + +The best know TV standards are NTSC/PAL/SECAM. but for decoding a frame that +information is not enough. There are several formats of the TV standards. +And not every TV decoder is able to handle every format. Also the every +combination is supported by the driver. There are currently 11 different +tv broadcast formats all aver the world. + +The CCIR defines parameters needed for broadcasting the signal. +The CCIR has defined different standards: A,B,D,E,F,G,D,H,I,K,K1,L,M,N,... +The CCIR says not much about the colorsystem used !!! +And talking about a colorsystem says not to much about how it is broadcast. + +The CCIR standards A,E,F are not used any more. + +When you speak about NTSC, you usually mean the standard: CCIR - M using +the NTSC colorsystem which is used in the USA, Japan, Mexico, Canada +and a few others. + +When you talk about PAL, you usually mean: CCIR - B/G using the PAL +colorsystem which is used in many Countries. + +When you talk about SECAM, you mean: CCIR - L using the SECAM Colorsystem +which is used in France, and a few others. + +There the other version of SECAM, CCIR - D/K is used in Bulgaria, China, +Slovakai, Hungary, Korea (Rep.), Poland, Rumania and a others. + +The CCIR - H uses the PAL colorsystem (sometimes SECAM) and is used in +Egypt, Libya, Sri Lanka, Syrain Arab. Rep. + +The CCIR - I uses the PAL colorsystem, and is used in Great Britain, Hong Kong, +Ireland, Nigeria, South Africa. + +The CCIR - N uses the PAL colorsystem and PAL frame size but the NTSC framerate, +and is used in Argentinia, Uruguay, an a few others + +We do not talk about how the audio is broadcast ! + +A rather good sites about the TV standards are: +http://www.sony.jp/support/ +http://info.electronicwerkstatt.de/bereiche/fernsehtechnik/frequenzen_und_normen/Fernsehnormen/ +and http://www.cabl.com/restaurant/channel.html + +Other weird things around: NTSC 4.43 is a modificated NTSC, which is mainly +used in PAL VCR's that are able to play back NTSC. PAL 60 seems to be the same +as NTSC 4.43 . The Datasheets also talk about NTSC 44, It seems as if it would +be the same as NTSC 4.43. +NTSC Combs seems to be a decoder mode where the decoder uses a comb filter +to split coma and luma instead of a Delay line. + +But I did not defiantly find out what NTSC Comb is. + +Philips saa7111 TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1997, is used in the BUZ and +- can handle: PAL B/G/H/I, PAL N, PAL M, NTSC M, NTSC N, NTSC 4.43 and SECAM + +Philips saa7110a TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1995, is used in the Pinnacle/Miro DC10(new), DC10+ and +- can handle: PAL B/G, NTSC M and SECAM + +Philips saa7114 TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 2000, is used in the LML33R10 and +- can handle: PAL B/G/D/H/I/N, PAL N, PAL M, NTSC M, NTSC 4.43 and SECAM + +Brooktree bt819 TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1996, and is used in the LML33 and +- can handle: PAL B/D/G/H/I, NTSC M + +Micronas vpx3220a TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1996, is used in the DC30 and DC30+ and +- can handle: PAL B/G/H/I, PAL N, PAL M, NTSC M, NTSC 44, PAL 60, SECAM,NTSC Comb + +Samsung ks0127 TV decoder +~~~~~~~~~~~~~~~~~~~~~~~~~ + +- is used in the AVS6EYES card and +- can handle: NTSC-M/N/44, PAL-M/N/B/G/H/I/D/K/L and SECAM + + +What the TV encoder can do an what not +-------------------------------------- + +The TV encoder is doing the "same" as the decoder, but in the other direction. +You feed them digital data and the generate a Composite or SVHS signal. +For information about the colorsystems and TV norm take a look in the +TV decoder section. + +Philips saa7185 TV Encoder +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1996, is used in the BUZ +- can generate: PAL B/G, NTSC M + +Brooktree bt856 TV Encoder +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1994, is used in the LML33 +- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M, PAL-N (Argentina) + +Analog Devices adv7170 TV Encoder +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 2000, is used in the LML300R10 +- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M, PAL 60 + +Analog Devices adv7175 TV Encoder +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1996, is used in the DC10, DC10+, DC10 old, DC30, DC30+ +- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M + +ITT mse3000 TV encoder +~~~~~~~~~~~~~~~~~~~~~~ + +- was introduced in 1991, is used in the DC10 old +- can generate: PAL , NTSC , SECAM + +Conexant bt866 TV encoder +~~~~~~~~~~~~~~~~~~~~~~~~~ + +- is used in AVS6EYES, and +- can generate: NTSC/PAL, PAL-M, PAL-N + +The adv717x, should be able to produce PAL N. But you find nothing PAL N +specific in the registers. Seem that you have to reuse a other standard +to generate PAL N, maybe it would work if you use the PAL M settings. + +How do I get this damn thing to work +------------------------------------ + +Load zr36067.o. If it can't autodetect your card, use the card=X insmod +option with X being the card number as given in the previous section. +To have more than one card, use card=X1[,X2[,X3,[X4[..]]]] + +To automate this, add the following to your /etc/modprobe.d/zoran.conf: + +options zr36067 card=X1[,X2[,X3[,X4[..]]]] +alias char-major-81-0 zr36067 + +One thing to keep in mind is that this doesn't load zr36067.o itself yet. It +just automates loading. If you start using xawtv, the device won't load on +some systems, since you're trying to load modules as a user, which is not +allowed ("permission denied"). A quick workaround is to add 'Load "v4l"' to +XF86Config-4 when you use X by default, or to run 'v4l-conf -c ' in +one of your startup scripts (normally rc.local) if you don't use X. Both +make sure that the modules are loaded on startup, under the root account. + +What mainboard should I use (or why doesn't my card work) +--------------------------------------------------------- + + +. In short: good=SiS/Intel, bad=VIA. + +Experience tells us that people with a Buz, on average, have more problems +than users with a DC10+/LML33. Also, it tells us that people owning a VIA- +based mainboard (ktXXX, MVP3) have more problems than users with a mainboard +based on a different chipset. Here's some notes from Andrew Stevens: + +Here's my experience of using LML33 and Buz on various motherboards: + +- VIA MVP3 + - Forget it. Pointless. Doesn't work. +- Intel 430FX (Pentium 200) + - LML33 perfect, Buz tolerable (3 or 4 frames dropped per movie) +- Intel 440BX (early stepping) + - LML33 tolerable. Buz starting to get annoying (6-10 frames/hour) +- Intel 440BX (late stepping) + - Buz tolerable, LML3 almost perfect (occasional single frame drops) +- SiS735 + - LML33 perfect, Buz tolerable. +- VIA KT133(*) + - LML33 starting to get annoying, Buz poor enough that I have up. + +- Both 440BX boards were dual CPU versions. + +Bernhard Praschinger later added: + +- AMD 751 + - Buz perfect-tolerable +- AMD 760 + - Buz perfect-tolerable + +In general, people on the user mailinglist won't give you much of a chance +if you have a VIA-based motherboard. They may be cheap, but sometimes, you'd +rather want to spend some more money on better boards. In general, VIA +mainboard's IDE/PCI performance will also suck badly compared to others. +You'll noticed the DC10+/DC30+ aren't mentioned anywhere in the overview. +Basically, you can assume that if the Buz works, the LML33 will work too. If +the LML33 works, the DC10+/DC30+ will work too. They're most tolerant to +different mainboard chipsets from all of the supported cards. + +If you experience timeouts during capture, buy a better mainboard or lower +the quality/buffersize during capture (see 'Concerning buffer sizes, quality, +output size etc.'). If it hangs, there's little we can do as of now. Check +your IRQs and make sure the card has its own interrupts. + +Programming interface +--------------------- + +This driver conforms to video4linux2. Support for V4L1 and for the custom +zoran ioctls has been removed in kernel 2.6.38. + +For programming example, please, look at lavrec.c and lavplay.c code in +the MJPEG-tools (http://mjpeg.sf.net/). + +Additional notes for software developers: + + The driver returns maxwidth and maxheight parameters according to + the current TV standard (norm). Therefore, the software which + communicates with the driver and "asks" for these parameters should + first set the correct norm. Well, it seems logically correct: TV + standard is "more constant" for current country than geometry + settings of a variety of TV capture cards which may work in ITU or + square pixel format. + +Applications +------------ + +Applications known to work with this driver: + +TV viewing: + +* xawtv +* kwintv +* probably any TV application that supports video4linux or video4linux2. + +MJPEG capture/playback: + +* mjpegtools/lavtools (or Linux Video Studio) +* gstreamer +* mplayer + +General raw capture: + +* xawtv +* gstreamer +* probably any application that supports video4linux or video4linux2 + +Video editing: + +* Cinelerra +* MainActor +* mjpegtools (or Linux Video Studio) + + +Concerning buffer sizes, quality, output size etc. +-------------------------------------------------- + + +The zr36060 can do 1:2 JPEG compression. This is really the theoretical +maximum that the chipset can reach. The driver can, however, limit compression +to a maximum (size) of 1:4. The reason for this is that some cards (e.g. Buz) +can't handle 1:2 compression without stopping capture after only a few minutes. +With 1:4, it'll mostly work. If you have a Buz, use 'low_bitrate=1' to go into +1:4 max. compression mode. + +100% JPEG quality is thus 1:2 compression in practice. So for a full PAL frame +(size 720x576). The JPEG fields are stored in YUY2 format, so the size of the +fields are 720x288x16/2 bits/field (2 fields/frame) = 207360 bytes/field x 2 = +414720 bytes/frame (add some more bytes for headers and DHT (huffman)/DQT +(quantization) tables, and you'll get to something like 512kB per frame for +1:2 compression. For 1:4 compression, you'd have frames of half this size. + +Some additional explanation by Martin Samuelsson, which also explains the +importance of buffer sizes: +-- +> Hmm, I do not think it is really that way. With the current (downloaded +> at 18:00 Monday) driver I get that output sizes for 10 sec: +> -q 50 -b 128 : 24.283.332 Bytes +> -q 50 -b 256 : 48.442.368 +> -q 25 -b 128 : 24.655.992 +> -q 25 -b 256 : 25.859.820 + +I woke up, and can't go to sleep again. I'll kill some time explaining why +this doesn't look strange to me. + +Let's do some math using a width of 704 pixels. I'm not sure whether the Buz +actually use that number or not, but that's not too important right now. + +704x288 pixels, one field, is 202752 pixels. Divided by 64 pixels per block; +3168 blocks per field. Each pixel consist of two bytes; 128 bytes per block; +1024 bits per block. 100% in the new driver mean 1:2 compression; the maximum +output becomes 512 bits per block. Actually 510, but 512 is simpler to use +for calculations. + +Let's say that we specify d1q50. We thus want 256 bits per block; times 3168 +becomes 811008 bits; 101376 bytes per field. We're talking raw bits and bytes +here, so we don't need to do any fancy corrections for bits-per-pixel or such +things. 101376 bytes per field. + +d1 video contains two fields per frame. Those sum up to 202752 bytes per +frame, and one of those frames goes into each buffer. + +But wait a second! -b128 gives 128kB buffers! It's not possible to cram +202752 bytes of JPEG data into 128kB! + +This is what the driver notice and automatically compensate for in your +examples. Let's do some math using this information: + +128kB is 131072 bytes. In this buffer, we want to store two fields, which +leaves 65536 bytes for each field. Using 3168 blocks per field, we get +20.68686868... available bytes per block; 165 bits. We can't allow the +request for 256 bits per block when there's only 165 bits available! The -q50 +option is silently overridden, and the -b128 option takes precedence, leaving +us with the equivalence of -q32. + +This gives us a data rate of 165 bits per block, which, times 3168, sums up +to 65340 bytes per field, out of the allowed 65536. The current driver has +another level of rate limiting; it won't accept -q values that fill more than +6/8 of the specified buffers. (I'm not sure why. "Playing it safe" seem to be +a safe bet. Personally, I think I would have lowered requested-bits-per-block +by one, or something like that.) We can't use 165 bits per block, but have to +lower it again, to 6/8 of the available buffer space: We end up with 124 bits +per block, the equivalence of -q24. With 128kB buffers, you can't use greater +than -q24 at -d1. (And PAL, and 704 pixels width...) + +The third example is limited to -q24 through the same process. The second +example, using very similar calculations, is limited to -q48. The only +example that actually grab at the specified -q value is the last one, which +is clearly visible, looking at the file size. +-- + +Conclusion: the quality of the resulting movie depends on buffer size, quality, +whether or not you use 'low_bitrate=1' as insmod option for the zr36060.c +module to do 1:4 instead of 1:2 compression, etc. + +If you experience timeouts, lowering the quality/buffersize or using +'low_bitrate=1 as insmod option for zr36060.o might actually help, as is +proven by the Buz. + +It hangs/crashes/fails/whatevers! Help! +--------------------------------------- + +Make sure that the card has its own interrupts (see /proc/interrupts), check +the output of dmesg at high verbosity (load zr36067.o with debug=2, +load all other modules with debug=1). Check that your mainboard is favorable +(see question 2) and if not, test the card in another computer. Also see the +notes given in question 3 and try lowering quality/buffersize/capturesize +if recording fails after a period of time. + +If all this doesn't help, give a clear description of the problem including +detailed hardware information (memory+brand, mainboard+chipset+brand, which +MJPEG card, processor, other PCI cards that might be of interest), give the +system PnP information (/proc/interrupts, /proc/dma, /proc/devices), and give +the kernel version, driver version, glibc version, gcc version and any other +information that might possibly be of interest. Also provide the dmesg output +at high verbosity. See 'Contacting' on how to contact the developers. + +Maintainers/Contacting +---------------------- + +Previous maintainers/developers of this driver are +- Laurent Pinchart +- Ronald Bultje rbultje@ronald.bitfreak.net +- Serguei Miridonov +- Wolfgang Scherr +- Dave Perks +- Rainer Johanni + +Driver's License +---------------- + + This driver is distributed under the terms of the General Public License. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + +See http://www.gnu.org/ for more information. -- cgit v1.2.3