From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- Documentation/filesystems/path-lookup.rst | 1390 +++++++++++++++++++++++++++++ 1 file changed, 1390 insertions(+) create mode 100644 Documentation/filesystems/path-lookup.rst (limited to 'Documentation/filesystems/path-lookup.rst') diff --git a/Documentation/filesystems/path-lookup.rst b/Documentation/filesystems/path-lookup.rst new file mode 100644 index 0000000000..2b2df6aa54 --- /dev/null +++ b/Documentation/filesystems/path-lookup.rst @@ -0,0 +1,1390 @@ +=============== +Pathname lookup +=============== + +This write-up is based on three articles published at lwn.net: + +- Pathname lookup in Linux +- RCU-walk: faster pathname lookup in Linux +- A walk among the symlinks + +Written by Neil Brown with help from Al Viro and Jon Corbet. +It has subsequently been updated to reflect changes in the kernel +including: + +- per-directory parallel name lookup. +- ``openat2()`` resolution restriction flags. + +Introduction to pathname lookup +=============================== + +The most obvious aspect of pathname lookup, which very little +exploration is needed to discover, is that it is complex. There are +many rules, special cases, and implementation alternatives that all +combine to confuse the unwary reader. Computer science has long been +acquainted with such complexity and has tools to help manage it. One +tool that we will make extensive use of is "divide and conquer". For +the early parts of the analysis we will divide off symlinks - leaving +them until the final part. Well before we get to symlinks we have +another major division based on the VFS's approach to locking which +will allow us to review "REF-walk" and "RCU-walk" separately. But we +are getting ahead of ourselves. There are some important low level +distinctions we need to clarify first. + +There are two sorts of ... +-------------------------- + +.. _openat: http://man7.org/linux/man-pages/man2/openat.2.html + +Pathnames (sometimes "file names"), used to identify objects in the +filesystem, will be familiar to most readers. They contain two sorts +of elements: "slashes" that are sequences of one or more "``/``" +characters, and "components" that are sequences of one or more +non-"``/``" characters. These form two kinds of paths. Those that +start with slashes are "absolute" and start from the filesystem root. +The others are "relative" and start from the current directory, or +from some other location specified by a file descriptor given to +"``*at()``" system calls such as `openat() `_. + +.. _execveat: http://man7.org/linux/man-pages/man2/execveat.2.html + +It is tempting to describe the second kind as starting with a +component, but that isn't always accurate: a pathname can lack both +slashes and components, it can be empty, in other words. This is +generally forbidden in POSIX, but some of those "``*at()``" system calls +in Linux permit it when the ``AT_EMPTY_PATH`` flag is given. For +example, if you have an open file descriptor on an executable file you +can execute it by calling `execveat() `_ passing +the file descriptor, an empty path, and the ``AT_EMPTY_PATH`` flag. + +These paths can be divided into two sections: the final component and +everything else. The "everything else" is the easy bit. In all cases +it must identify a directory that already exists, otherwise an error +such as ``ENOENT`` or ``ENOTDIR`` will be reported. + +The final component is not so simple. Not only do different system +calls interpret it quite differently (e.g. some create it, some do +not), but it might not even exist: neither the empty pathname nor the +pathname that is just slashes have a final component. If it does +exist, it could be "``.``" or "``..``" which are handled quite differently +from other components. + +.. _POSIX: https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap04.html#tag_04_12 + +If a pathname ends with a slash, such as "``/tmp/foo/``" it might be +tempting to consider that to have an empty final component. In many +ways that would lead to correct results, but not always. In +particular, ``mkdir()`` and ``rmdir()`` each create or remove a directory named +by the final component, and they are required to work with pathnames +ending in "``/``". According to POSIX_: + + A pathname that contains at least one non- character and + that ends with one or more trailing characters shall not + be resolved successfully unless the last pathname component before + the trailing characters names an existing directory or a + directory entry that is to be created for a directory immediately + after the pathname is resolved. + +The Linux pathname walking code (mostly in ``fs/namei.c``) deals with +all of these issues: breaking the path into components, handling the +"everything else" quite separately from the final component, and +checking that the trailing slash is not used where it isn't +permitted. It also addresses the important issue of concurrent +access. + +While one process is looking up a pathname, another might be making +changes that affect that lookup. One fairly extreme case is that if +"a/b" were renamed to "a/c/b" while another process were looking up +"a/b/..", that process might successfully resolve on "a/c". +Most races are much more subtle, and a big part of the task of +pathname lookup is to prevent them from having damaging effects. Many +of the possible races are seen most clearly in the context of the +"dcache" and an understanding of that is central to understanding +pathname lookup. + +More than just a cache +---------------------- + +The "dcache" caches information about names in each filesystem to +make them quickly available for lookup. Each entry (known as a +"dentry") contains three significant fields: a component name, a +pointer to a parent dentry, and a pointer to the "inode" which +contains further information about the object in that parent with +the given name. The inode pointer can be ``NULL`` indicating that the +name doesn't exist in the parent. While there can be linkage in the +dentry of a directory to the dentries of the children, that linkage is +not used for pathname lookup, and so will not be considered here. + +The dcache has a number of uses apart from accelerating lookup. One +that will be particularly relevant is that it is closely integrated +with the mount table that records which filesystem is mounted where. +What the mount table actually stores is which dentry is mounted on top +of which other dentry. + +When considering the dcache, we have another of our "two types" +distinctions: there are two types of filesystems. + +Some filesystems ensure that the information in the dcache is always +completely accurate (though not necessarily complete). This can allow +the VFS to determine if a particular file does or doesn't exist +without checking with the filesystem, and means that the VFS can +protect the filesystem against certain races and other problems. +These are typically "local" filesystems such as ext3, XFS, and Btrfs. + +Other filesystems don't provide that guarantee because they cannot. +These are typically filesystems that are shared across a network, +whether remote filesystems like NFS and 9P, or cluster filesystems +like ocfs2 or cephfs. These filesystems allow the VFS to revalidate +cached information, and must provide their own protection against +awkward races. The VFS can detect these filesystems by the +``DCACHE_OP_REVALIDATE`` flag being set in the dentry. + +REF-walk: simple concurrency management with refcounts and spinlocks +-------------------------------------------------------------------- + +With all of those divisions carefully classified, we can now start +looking at the actual process of walking along a path. In particular +we will start with the handling of the "everything else" part of a +pathname, and focus on the "REF-walk" approach to concurrency +management. This code is found in the ``link_path_walk()`` function, if +you ignore all the places that only run when "``LOOKUP_RCU``" +(indicating the use of RCU-walk) is set. + +.. _Meet the Lockers: https://lwn.net/Articles/453685/ + +REF-walk is fairly heavy-handed with locks and reference counts. Not +as heavy-handed as in the old "big kernel lock" days, but certainly not +afraid of taking a lock when one is needed. It uses a variety of +different concurrency controls. A background understanding of the +various primitives is assumed, or can be gleaned from elsewhere such +as in `Meet the Lockers`_. + +The locking mechanisms used by REF-walk include: + +dentry->d_lockref +~~~~~~~~~~~~~~~~~ + +This uses the lockref primitive to provide both a spinlock and a +reference count. The special-sauce of this primitive is that the +conceptual sequence "lock; inc_ref; unlock;" can often be performed +with a single atomic memory operation. + +Holding a reference on a dentry ensures that the dentry won't suddenly +be freed and used for something else, so the values in various fields +will behave as expected. It also protects the ``->d_inode`` reference +to the inode to some extent. + +The association between a dentry and its inode is fairly permanent. +For example, when a file is renamed, the dentry and inode move +together to the new location. When a file is created the dentry will +initially be negative (i.e. ``d_inode`` is ``NULL``), and will be assigned +to the new inode as part of the act of creation. + +When a file is deleted, this can be reflected in the cache either by +setting ``d_inode`` to ``NULL``, or by removing it from the hash table +(described shortly) used to look up the name in the parent directory. +If the dentry is still in use the second option is used as it is +perfectly legal to keep using an open file after it has been deleted +and having the dentry around helps. If the dentry is not otherwise in +use (i.e. if the refcount in ``d_lockref`` is one), only then will +``d_inode`` be set to ``NULL``. Doing it this way is more efficient for a +very common case. + +So as long as a counted reference is held to a dentry, a non-``NULL`` ``->d_inode`` +value will never be changed. + +dentry->d_lock +~~~~~~~~~~~~~~ + +``d_lock`` is a synonym for the spinlock that is part of ``d_lockref`` above. +For our purposes, holding this lock protects against the dentry being +renamed or unlinked. In particular, its parent (``d_parent``), and its +name (``d_name``) cannot be changed, and it cannot be removed from the +dentry hash table. + +When looking for a name in a directory, REF-walk takes ``d_lock`` on +each candidate dentry that it finds in the hash table and then checks +that the parent and name are correct. So it doesn't lock the parent +while searching in the cache; it only locks children. + +When looking for the parent for a given name (to handle "``..``"), +REF-walk can take ``d_lock`` to get a stable reference to ``d_parent``, +but it first tries a more lightweight approach. As seen in +``dget_parent()``, if a reference can be claimed on the parent, and if +subsequently ``d_parent`` can be seen to have not changed, then there is +no need to actually take the lock on the child. + +rename_lock +~~~~~~~~~~~ + +Looking up a given name in a given directory involves computing a hash +from the two values (the name and the dentry of the directory), +accessing that slot in a hash table, and searching the linked list +that is found there. + +When a dentry is renamed, the name and the parent dentry can both +change so the hash will almost certainly change too. This would move the +dentry to a different chain in the hash table. If a filename search +happened to be looking at a dentry that was moved in this way, +it might end up continuing the search down the wrong chain, +and so miss out on part of the correct chain. + +The name-lookup process (``d_lookup()``) does *not* try to prevent this +from happening, but only to detect when it happens. +``rename_lock`` is a seqlock that is updated whenever any dentry is +renamed. If ``d_lookup`` finds that a rename happened while it +unsuccessfully scanned a chain in the hash table, it simply tries +again. + +``rename_lock`` is also used to detect and defend against potential attacks +against ``LOOKUP_BENEATH`` and ``LOOKUP_IN_ROOT`` when resolving ".." (where +the parent directory is moved outside the root, bypassing the ``path_equal()`` +check). If ``rename_lock`` is updated during the lookup and the path encounters +a "..", a potential attack occurred and ``handle_dots()`` will bail out with +``-EAGAIN``. + +inode->i_rwsem +~~~~~~~~~~~~~~ + +``i_rwsem`` is a read/write semaphore that serializes all changes to a particular +directory. This ensures that, for example, an ``unlink()`` and a ``rename()`` +cannot both happen at the same time. It also keeps the directory +stable while the filesystem is asked to look up a name that is not +currently in the dcache or, optionally, when the list of entries in a +directory is being retrieved with ``readdir()``. + +This has a complementary role to that of ``d_lock``: ``i_rwsem`` on a +directory protects all of the names in that directory, while ``d_lock`` +on a name protects just one name in a directory. Most changes to the +dcache hold ``i_rwsem`` on the relevant directory inode and briefly take +``d_lock`` on one or more the dentries while the change happens. One +exception is when idle dentries are removed from the dcache due to +memory pressure. This uses ``d_lock``, but ``i_rwsem`` plays no role. + +The semaphore affects pathname lookup in two distinct ways. Firstly it +prevents changes during lookup of a name in a directory. ``walk_component()`` uses +``lookup_fast()`` first which, in turn, checks to see if the name is in the cache, +using only ``d_lock`` locking. If the name isn't found, then ``walk_component()`` +falls back to ``lookup_slow()`` which takes a shared lock on ``i_rwsem``, checks again that +the name isn't in the cache, and then calls in to the filesystem to get a +definitive answer. A new dentry will be added to the cache regardless of +the result. + +Secondly, when pathname lookup reaches the final component, it will +sometimes need to take an exclusive lock on ``i_rwsem`` before performing the last lookup so +that the required exclusion can be achieved. How path lookup chooses +to take, or not take, ``i_rwsem`` is one of the +issues addressed in a subsequent section. + +If two threads attempt to look up the same name at the same time - a +name that is not yet in the dcache - the shared lock on ``i_rwsem`` will +not prevent them both adding new dentries with the same name. As this +would result in confusion an extra level of interlocking is used, +based around a secondary hash table (``in_lookup_hashtable``) and a +per-dentry flag bit (``DCACHE_PAR_LOOKUP``). + +To add a new dentry to the cache while only holding a shared lock on +``i_rwsem``, a thread must call ``d_alloc_parallel()``. This allocates a +dentry, stores the required name and parent in it, checks if there +is already a matching dentry in the primary or secondary hash +tables, and if not, stores the newly allocated dentry in the secondary +hash table, with ``DCACHE_PAR_LOOKUP`` set. + +If a matching dentry was found in the primary hash table then that is +returned and the caller can know that it lost a race with some other +thread adding the entry. If no matching dentry is found in either +cache, the newly allocated dentry is returned and the caller can +detect this from the presence of ``DCACHE_PAR_LOOKUP``. In this case it +knows that it has won any race and now is responsible for asking the +filesystem to perform the lookup and find the matching inode. When +the lookup is complete, it must call ``d_lookup_done()`` which clears +the flag and does some other house keeping, including removing the +dentry from the secondary hash table - it will normally have been +added to the primary hash table already. Note that a ``struct +waitqueue_head`` is passed to ``d_alloc_parallel()``, and +``d_lookup_done()`` must be called while this ``waitqueue_head`` is still +in scope. + +If a matching dentry is found in the secondary hash table, +``d_alloc_parallel()`` has a little more work to do. It first waits for +``DCACHE_PAR_LOOKUP`` to be cleared, using a wait_queue that was passed +to the instance of ``d_alloc_parallel()`` that won the race and that +will be woken by the call to ``d_lookup_done()``. It then checks to see +if the dentry has now been added to the primary hash table. If it +has, the dentry is returned and the caller just sees that it lost any +race. If it hasn't been added to the primary hash table, the most +likely explanation is that some other dentry was added instead using +``d_splice_alias()``. In any case, ``d_alloc_parallel()`` repeats all the +look ups from the start and will normally return something from the +primary hash table. + +mnt->mnt_count +~~~~~~~~~~~~~~ + +``mnt_count`` is a per-CPU reference counter on "``mount``" structures. +Per-CPU here means that incrementing the count is cheap as it only +uses CPU-local memory, but checking if the count is zero is expensive as +it needs to check with every CPU. Taking a ``mnt_count`` reference +prevents the mount structure from disappearing as the result of regular +unmount operations, but does not prevent a "lazy" unmount. So holding +``mnt_count`` doesn't ensure that the mount remains in the namespace and, +in particular, doesn't stabilize the link to the mounted-on dentry. It +does, however, ensure that the ``mount`` data structure remains coherent, +and it provides a reference to the root dentry of the mounted +filesystem. So a reference through ``->mnt_count`` provides a stable +reference to the mounted dentry, but not the mounted-on dentry. + +mount_lock +~~~~~~~~~~ + +``mount_lock`` is a global seqlock, a bit like ``rename_lock``. It can be used to +check if any change has been made to any mount points. + +While walking down the tree (away from the root) this lock is used when +crossing a mount point to check that the crossing was safe. That is, +the value in the seqlock is read, then the code finds the mount that +is mounted on the current directory, if there is one, and increments +the ``mnt_count``. Finally the value in ``mount_lock`` is checked against +the old value. If there is no change, then the crossing was safe. If there +was a change, the ``mnt_count`` is decremented and the whole process is +retried. + +When walking up the tree (towards the root) by following a ".." link, +a little more care is needed. In this case the seqlock (which +contains both a counter and a spinlock) is fully locked to prevent +any changes to any mount points while stepping up. This locking is +needed to stabilize the link to the mounted-on dentry, which the +refcount on the mount itself doesn't ensure. + +``mount_lock`` is also used to detect and defend against potential attacks +against ``LOOKUP_BENEATH`` and ``LOOKUP_IN_ROOT`` when resolving ".." (where +the parent directory is moved outside the root, bypassing the ``path_equal()`` +check). If ``mount_lock`` is updated during the lookup and the path encounters +a "..", a potential attack occurred and ``handle_dots()`` will bail out with +``-EAGAIN``. + +RCU +~~~ + +Finally the global (but extremely lightweight) RCU read lock is held +from time to time to ensure certain data structures don't get freed +unexpectedly. + +In particular it is held while scanning chains in the dcache hash +table, and the mount point hash table. + +Bringing it together with ``struct nameidata`` +---------------------------------------------- + +.. _First edition Unix: https://minnie.tuhs.org/cgi-bin/utree.pl?file=V1/u2.s + +Throughout the process of walking a path, the current status is stored +in a ``struct nameidata``, "namei" being the traditional name - dating +all the way back to `First Edition Unix`_ - of the function that +converts a "name" to an "inode". ``struct nameidata`` contains (among +other fields): + +``struct path path`` +~~~~~~~~~~~~~~~~~~~~ + +A ``path`` contains a ``struct vfsmount`` (which is +embedded in a ``struct mount``) and a ``struct dentry``. Together these +record the current status of the walk. They start out referring to the +starting point (the current working directory, the root directory, or some other +directory identified by a file descriptor), and are updated on each +step. A reference through ``d_lockref`` and ``mnt_count`` is always +held. + +``struct qstr last`` +~~~~~~~~~~~~~~~~~~~~ + +This is a string together with a length (i.e. *not* ``nul`` terminated) +that is the "next" component in the pathname. + +``int last_type`` +~~~~~~~~~~~~~~~~~ + +This is one of ``LAST_NORM``, ``LAST_ROOT``, ``LAST_DOT`` or ``LAST_DOTDOT``. +The ``last`` field is only valid if the type is ``LAST_NORM``. + +``struct path root`` +~~~~~~~~~~~~~~~~~~~~ + +This is used to hold a reference to the effective root of the +filesystem. Often that reference won't be needed, so this field is +only assigned the first time it is used, or when a non-standard root +is requested. Keeping a reference in the ``nameidata`` ensures that +only one root is in effect for the entire path walk, even if it races +with a ``chroot()`` system call. + +It should be noted that in the case of ``LOOKUP_IN_ROOT`` or +``LOOKUP_BENEATH``, the effective root becomes the directory file descriptor +passed to ``openat2()`` (which exposes these ``LOOKUP_`` flags). + +The root is needed when either of two conditions holds: (1) either the +pathname or a symbolic link starts with a "'/'", or (2) a "``..``" +component is being handled, since "``..``" from the root must always stay +at the root. The value used is usually the current root directory of +the calling process. An alternate root can be provided as when +``sysctl()`` calls ``file_open_root()``, and when NFSv4 or Btrfs call +``mount_subtree()``. In each case a pathname is being looked up in a very +specific part of the filesystem, and the lookup must not be allowed to +escape that subtree. It works a bit like a local ``chroot()``. + +Ignoring the handling of symbolic links, we can now describe the +"``link_path_walk()``" function, which handles the lookup of everything +except the final component as: + + Given a path (``name``) and a nameidata structure (``nd``), check that the + current directory has execute permission and then advance ``name`` + over one component while updating ``last_type`` and ``last``. If that + was the final component, then return, otherwise call + ``walk_component()`` and repeat from the top. + +``walk_component()`` is even easier. If the component is ``LAST_DOTS``, +it calls ``handle_dots()`` which does the necessary locking as already +described. If it finds a ``LAST_NORM`` component it first calls +"``lookup_fast()``" which only looks in the dcache, but will ask the +filesystem to revalidate the result if it is that sort of filesystem. +If that doesn't get a good result, it calls "``lookup_slow()``" which +takes ``i_rwsem``, rechecks the cache, and then asks the filesystem +to find a definitive answer. + +As the last step of walk_component(), step_into() will be called either +directly from walk_component() or from handle_dots(). It calls +handle_mounts(), to check and handle mount points, in which a new +``struct path`` is created containing a counted reference to the new dentry and +a reference to the new ``vfsmount`` which is only counted if it is +different from the previous ``vfsmount``. Then if there is +a symbolic link, step_into() calls pick_link() to deal with it, +otherwise it installs the new ``struct path`` in the ``struct nameidata``, and +drops the unneeded references. + +This "hand-over-hand" sequencing of getting a reference to the new +dentry before dropping the reference to the previous dentry may +seem obvious, but is worth pointing out so that we will recognize its +analogue in the "RCU-walk" version. + +Handling the final component +---------------------------- + +``link_path_walk()`` only walks as far as setting ``nd->last`` and +``nd->last_type`` to refer to the final component of the path. It does +not call ``walk_component()`` that last time. Handling that final +component remains for the caller to sort out. Those callers are +path_lookupat(), path_parentat() and +path_openat() each of which handles the differing requirements of +different system calls. + +``path_parentat()`` is clearly the simplest - it just wraps a little bit +of housekeeping around ``link_path_walk()`` and returns the parent +directory and final component to the caller. The caller will be either +aiming to create a name (via ``filename_create()``) or remove or rename +a name (in which case ``user_path_parent()`` is used). They will use +``i_rwsem`` to exclude other changes while they validate and then +perform their operation. + +``path_lookupat()`` is nearly as simple - it is used when an existing +object is wanted such as by ``stat()`` or ``chmod()``. It essentially just +calls ``walk_component()`` on the final component through a call to +``lookup_last()``. ``path_lookupat()`` returns just the final dentry. +It is worth noting that when flag ``LOOKUP_MOUNTPOINT`` is set, +path_lookupat() will unset LOOKUP_JUMPED in nameidata so that in the +subsequent path traversal d_weak_revalidate() won't be called. +This is important when unmounting a filesystem that is inaccessible, such as +one provided by a dead NFS server. + +Finally ``path_openat()`` is used for the ``open()`` system call; it +contains, in support functions starting with "open_last_lookups()", all the +complexity needed to handle the different subtleties of O_CREAT (with +or without O_EXCL), final "``/``" characters, and trailing symbolic +links. We will revisit this in the final part of this series, which +focuses on those symbolic links. "open_last_lookups()" will sometimes, but +not always, take ``i_rwsem``, depending on what it finds. + +Each of these, or the functions which call them, need to be alert to +the possibility that the final component is not ``LAST_NORM``. If the +goal of the lookup is to create something, then any value for +``last_type`` other than ``LAST_NORM`` will result in an error. For +example if ``path_parentat()`` reports ``LAST_DOTDOT``, then the caller +won't try to create that name. They also check for trailing slashes +by testing ``last.name[last.len]``. If there is any character beyond +the final component, it must be a trailing slash. + +Revalidation and automounts +--------------------------- + +Apart from symbolic links, there are only two parts of the "REF-walk" +process not yet covered. One is the handling of stale cache entries +and the other is automounts. + +On filesystems that require it, the lookup routines will call the +``->d_revalidate()`` dentry method to ensure that the cached information +is current. This will often confirm validity or update a few details +from a server. In some cases it may find that there has been change +further up the path and that something that was thought to be valid +previously isn't really. When this happens the lookup of the whole +path is aborted and retried with the "``LOOKUP_REVAL``" flag set. This +forces revalidation to be more thorough. We will see more details of +this retry process in the next article. + +Automount points are locations in the filesystem where an attempt to +lookup a name can trigger changes to how that lookup should be +handled, in particular by mounting a filesystem there. These are +covered in greater detail in autofs.txt in the Linux documentation +tree, but a few notes specifically related to path lookup are in order +here. + +The Linux VFS has a concept of "managed" dentries. There are three +potentially interesting things about these dentries corresponding +to three different flags that might be set in ``dentry->d_flags``: + +``DCACHE_MANAGE_TRANSIT`` +~~~~~~~~~~~~~~~~~~~~~~~~~ + +If this flag has been set, then the filesystem has requested that the +``d_manage()`` dentry operation be called before handling any possible +mount point. This can perform two particular services: + +It can block to avoid races. If an automount point is being +unmounted, the ``d_manage()`` function will usually wait for that +process to complete before letting the new lookup proceed and possibly +trigger a new automount. + +It can selectively allow only some processes to transit through a +mount point. When a server process is managing automounts, it may +need to access a directory without triggering normal automount +processing. That server process can identify itself to the ``autofs`` +filesystem, which will then give it a special pass through +``d_manage()`` by returning ``-EISDIR``. + +``DCACHE_MOUNTED`` +~~~~~~~~~~~~~~~~~~ + +This flag is set on every dentry that is mounted on. As Linux +supports multiple filesystem namespaces, it is possible that the +dentry may not be mounted on in *this* namespace, just in some +other. So this flag is seen as a hint, not a promise. + +If this flag is set, and ``d_manage()`` didn't return ``-EISDIR``, +``lookup_mnt()`` is called to examine the mount hash table (honoring the +``mount_lock`` described earlier) and possibly return a new ``vfsmount`` +and a new ``dentry`` (both with counted references). + +``DCACHE_NEED_AUTOMOUNT`` +~~~~~~~~~~~~~~~~~~~~~~~~~ + +If ``d_manage()`` allowed us to get this far, and ``lookup_mnt()`` didn't +find a mount point, then this flag causes the ``d_automount()`` dentry +operation to be called. + +The ``d_automount()`` operation can be arbitrarily complex and may +communicate with server processes etc. but it should ultimately either +report that there was an error, that there was nothing to mount, or +should provide an updated ``struct path`` with new ``dentry`` and ``vfsmount``. + +In the latter case, ``finish_automount()`` will be called to safely +install the new mount point into the mount table. + +There is no new locking of import here and it is important that no +locks (only counted references) are held over this processing due to +the very real possibility of extended delays. +This will become more important next time when we examine RCU-walk +which is particularly sensitive to delays. + +RCU-walk - faster pathname lookup in Linux +========================================== + +RCU-walk is another algorithm for performing pathname lookup in Linux. +It is in many ways similar to REF-walk and the two share quite a bit +of code. The significant difference in RCU-walk is how it allows for +the possibility of concurrent access. + +We noted that REF-walk is complex because there are numerous details +and special cases. RCU-walk reduces this complexity by simply +refusing to handle a number of cases -- it instead falls back to +REF-walk. The difficulty with RCU-walk comes from a different +direction: unfamiliarity. The locking rules when depending on RCU are +quite different from traditional locking, so we will spend a little extra +time when we come to those. + +Clear demarcation of roles +-------------------------- + +The easiest way to manage concurrency is to forcibly stop any other +thread from changing the data structures that a given thread is +looking at. In cases where no other thread would even think of +changing the data and lots of different threads want to read at the +same time, this can be very costly. Even when using locks that permit +multiple concurrent readers, the simple act of updating the count of +the number of current readers can impose an unwanted cost. So the +goal when reading a shared data structure that no other process is +changing is to avoid writing anything to memory at all. Take no +locks, increment no counts, leave no footprints. + +The REF-walk mechanism already described certainly doesn't follow this +principle, but then it is really designed to work when there may well +be other threads modifying the data. RCU-walk, in contrast, is +designed for the common situation where there are lots of frequent +readers and only occasional writers. This may not be common in all +parts of the filesystem tree, but in many parts it will be. For the +other parts it is important that RCU-walk can quickly fall back to +using REF-walk. + +Pathname lookup always starts in RCU-walk mode but only remains there +as long as what it is looking for is in the cache and is stable. It +dances lightly down the cached filesystem image, leaving no footprints +and carefully watching where it is, to be sure it doesn't trip. If it +notices that something has changed or is changing, or if something +isn't in the cache, then it tries to stop gracefully and switch to +REF-walk. + +This stopping requires getting a counted reference on the current +``vfsmount`` and ``dentry``, and ensuring that these are still valid - +that a path walk with REF-walk would have found the same entries. +This is an invariant that RCU-walk must guarantee. It can only make +decisions, such as selecting the next step, that are decisions which +REF-walk could also have made if it were walking down the tree at the +same time. If the graceful stop succeeds, the rest of the path is +processed with the reliable, if slightly sluggish, REF-walk. If +RCU-walk finds it cannot stop gracefully, it simply gives up and +restarts from the top with REF-walk. + +This pattern of "try RCU-walk, if that fails try REF-walk" can be +clearly seen in functions like filename_lookup(), +filename_parentat(), +do_filp_open(), and do_file_open_root(). These four +correspond roughly to the three ``path_*()`` functions we met earlier, +each of which calls ``link_path_walk()``. The ``path_*()`` functions are +called using different mode flags until a mode is found which works. +They are first called with ``LOOKUP_RCU`` set to request "RCU-walk". If +that fails with the error ``ECHILD`` they are called again with no +special flag to request "REF-walk". If either of those report the +error ``ESTALE`` a final attempt is made with ``LOOKUP_REVAL`` set (and no +``LOOKUP_RCU``) to ensure that entries found in the cache are forcibly +revalidated - normally entries are only revalidated if the filesystem +determines that they are too old to trust. + +The ``LOOKUP_RCU`` attempt may drop that flag internally and switch to +REF-walk, but will never then try to switch back to RCU-walk. Places +that trip up RCU-walk are much more likely to be near the leaves and +so it is very unlikely that there will be much, if any, benefit from +switching back. + +RCU and seqlocks: fast and light +-------------------------------- + +RCU is, unsurprisingly, critical to RCU-walk mode. The +``rcu_read_lock()`` is held for the entire time that RCU-walk is walking +down a path. The particular guarantee it provides is that the key +data structures - dentries, inodes, super_blocks, and mounts - will +not be freed while the lock is held. They might be unlinked or +invalidated in one way or another, but the memory will not be +repurposed so values in various fields will still be meaningful. This +is the only guarantee that RCU provides; everything else is done using +seqlocks. + +As we saw above, REF-walk holds a counted reference to the current +dentry and the current vfsmount, and does not release those references +before taking references to the "next" dentry or vfsmount. It also +sometimes takes the ``d_lock`` spinlock. These references and locks are +taken to prevent certain changes from happening. RCU-walk must not +take those references or locks and so cannot prevent such changes. +Instead, it checks to see if a change has been made, and aborts or +retries if it has. + +To preserve the invariant mentioned above (that RCU-walk may only make +decisions that REF-walk could have made), it must make the checks at +or near the same places that REF-walk holds the references. So, when +REF-walk increments a reference count or takes a spinlock, RCU-walk +samples the status of a seqlock using ``read_seqcount_begin()`` or a +similar function. When REF-walk decrements the count or drops the +lock, RCU-walk checks if the sampled status is still valid using +``read_seqcount_retry()`` or similar. + +However, there is a little bit more to seqlocks than that. If +RCU-walk accesses two different fields in a seqlock-protected +structure, or accesses the same field twice, there is no a priori +guarantee of any consistency between those accesses. When consistency +is needed - which it usually is - RCU-walk must take a copy and then +use ``read_seqcount_retry()`` to validate that copy. + +``read_seqcount_retry()`` not only checks the sequence number, but also +imposes a memory barrier so that no memory-read instruction from +*before* the call can be delayed until *after* the call, either by the +CPU or by the compiler. A simple example of this can be seen in +``slow_dentry_cmp()`` which, for filesystems which do not use simple +byte-wise name equality, calls into the filesystem to compare a name +against a dentry. The length and name pointer are copied into local +variables, then ``read_seqcount_retry()`` is called to confirm the two +are consistent, and only then is ``->d_compare()`` called. When +standard filename comparison is used, ``dentry_cmp()`` is called +instead. Notably it does *not* use ``read_seqcount_retry()``, but +instead has a large comment explaining why the consistency guarantee +isn't necessary. A subsequent ``read_seqcount_retry()`` will be +sufficient to catch any problem that could occur at this point. + +With that little refresher on seqlocks out of the way we can look at +the bigger picture of how RCU-walk uses seqlocks. + +``mount_lock`` and ``nd->m_seq`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +We already met the ``mount_lock`` seqlock when REF-walk used it to +ensure that crossing a mount point is performed safely. RCU-walk uses +it for that too, but for quite a bit more. + +Instead of taking a counted reference to each ``vfsmount`` as it +descends the tree, RCU-walk samples the state of ``mount_lock`` at the +start of the walk and stores this initial sequence number in the +``struct nameidata`` in the ``m_seq`` field. This one lock and one +sequence number are used to validate all accesses to all ``vfsmounts``, +and all mount point crossings. As changes to the mount table are +relatively rare, it is reasonable to fall back on REF-walk any time +that any "mount" or "unmount" happens. + +``m_seq`` is checked (using ``read_seqretry()``) at the end of an RCU-walk +sequence, whether switching to REF-walk for the rest of the path or +when the end of the path is reached. It is also checked when stepping +down over a mount point (in ``__follow_mount_rcu()``) or up (in +``follow_dotdot_rcu()``). If it is ever found to have changed, the +whole RCU-walk sequence is aborted and the path is processed again by +REF-walk. + +If RCU-walk finds that ``mount_lock`` hasn't changed then it can be sure +that, had REF-walk taken counted references on each vfsmount, the +results would have been the same. This ensures the invariant holds, +at least for vfsmount structures. + +``dentry->d_seq`` and ``nd->seq`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In place of taking a count or lock on ``d_reflock``, RCU-walk samples +the per-dentry ``d_seq`` seqlock, and stores the sequence number in the +``seq`` field of the nameidata structure, so ``nd->seq`` should always be +the current sequence number of ``nd->dentry``. This number needs to be +revalidated after copying, and before using, the name, parent, or +inode of the dentry. + +The handling of the name we have already looked at, and the parent is +only accessed in ``follow_dotdot_rcu()`` which fairly trivially follows +the required pattern, though it does so for three different cases. + +When not at a mount point, ``d_parent`` is followed and its ``d_seq`` is +collected. When we are at a mount point, we instead follow the +``mnt->mnt_mountpoint`` link to get a new dentry and collect its +``d_seq``. Then, after finally finding a ``d_parent`` to follow, we must +check if we have landed on a mount point and, if so, must find that +mount point and follow the ``mnt->mnt_root`` link. This would imply a +somewhat unusual, but certainly possible, circumstance where the +starting point of the path lookup was in part of the filesystem that +was mounted on, and so not visible from the root. + +The inode pointer, stored in ``->d_inode``, is a little more +interesting. The inode will always need to be accessed at least +twice, once to determine if it is NULL and once to verify access +permissions. Symlink handling requires a validated inode pointer too. +Rather than revalidating on each access, a copy is made on the first +access and it is stored in the ``inode`` field of ``nameidata`` from where +it can be safely accessed without further validation. + +``lookup_fast()`` is the only lookup routine that is used in RCU-mode, +``lookup_slow()`` being too slow and requiring locks. It is in +``lookup_fast()`` that we find the important "hand over hand" tracking +of the current dentry. + +The current ``dentry`` and current ``seq`` number are passed to +``__d_lookup_rcu()`` which, on success, returns a new ``dentry`` and a +new ``seq`` number. ``lookup_fast()`` then copies the inode pointer and +revalidates the new ``seq`` number. It then validates the old ``dentry`` +with the old ``seq`` number one last time and only then continues. This +process of getting the ``seq`` number of the new dentry and then +checking the ``seq`` number of the old exactly mirrors the process of +getting a counted reference to the new dentry before dropping that for +the old dentry which we saw in REF-walk. + +No ``inode->i_rwsem`` or even ``rename_lock`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A semaphore is a fairly heavyweight lock that can only be taken when it is +permissible to sleep. As ``rcu_read_lock()`` forbids sleeping, +``inode->i_rwsem`` plays no role in RCU-walk. If some other thread does +take ``i_rwsem`` and modifies the directory in a way that RCU-walk needs +to notice, the result will be either that RCU-walk fails to find the +dentry that it is looking for, or it will find a dentry which +``read_seqretry()`` won't validate. In either case it will drop down to +REF-walk mode which can take whatever locks are needed. + +Though ``rename_lock`` could be used by RCU-walk as it doesn't require +any sleeping, RCU-walk doesn't bother. REF-walk uses ``rename_lock`` to +protect against the possibility of hash chains in the dcache changing +while they are being searched. This can result in failing to find +something that actually is there. When RCU-walk fails to find +something in the dentry cache, whether it is really there or not, it +already drops down to REF-walk and tries again with appropriate +locking. This neatly handles all cases, so adding extra checks on +rename_lock would bring no significant value. + +``unlazy walk()`` and ``complete_walk()`` +----------------------------------------- + +That "dropping down to REF-walk" typically involves a call to +``unlazy_walk()``, so named because "RCU-walk" is also sometimes +referred to as "lazy walk". ``unlazy_walk()`` is called when +following the path down to the current vfsmount/dentry pair seems to +have proceeded successfully, but the next step is problematic. This +can happen if the next name cannot be found in the dcache, if +permission checking or name revalidation couldn't be achieved while +the ``rcu_read_lock()`` is held (which forbids sleeping), if an +automount point is found, or in a couple of cases involving symlinks. +It is also called from ``complete_walk()`` when the lookup has reached +the final component, or the very end of the path, depending on which +particular flavor of lookup is used. + +Other reasons for dropping out of RCU-walk that do not trigger a call +to ``unlazy_walk()`` are when some inconsistency is found that cannot be +handled immediately, such as ``mount_lock`` or one of the ``d_seq`` +seqlocks reporting a change. In these cases the relevant function +will return ``-ECHILD`` which will percolate up until it triggers a new +attempt from the top using REF-walk. + +For those cases where ``unlazy_walk()`` is an option, it essentially +takes a reference on each of the pointers that it holds (vfsmount, +dentry, and possibly some symbolic links) and then verifies that the +relevant seqlocks have not been changed. If there have been changes, +it, too, aborts with ``-ECHILD``, otherwise the transition to REF-walk +has been a success and the lookup process continues. + +Taking a reference on those pointers is not quite as simple as just +incrementing a counter. That works to take a second reference if you +already have one (often indirectly through another object), but it +isn't sufficient if you don't actually have a counted reference at +all. For ``dentry->d_lockref``, it is safe to increment the reference +counter to get a reference unless it has been explicitly marked as +"dead" which involves setting the counter to ``-128``. +``lockref_get_not_dead()`` achieves this. + +For ``mnt->mnt_count`` it is safe to take a reference as long as +``mount_lock`` is then used to validate the reference. If that +validation fails, it may *not* be safe to just drop that reference in +the standard way of calling ``mnt_put()`` - an unmount may have +progressed too far. So the code in ``legitimize_mnt()``, when it +finds that the reference it got might not be safe, checks the +``MNT_SYNC_UMOUNT`` flag to determine if a simple ``mnt_put()`` is +correct, or if it should just decrement the count and pretend none of +this ever happened. + +Taking care in filesystems +-------------------------- + +RCU-walk depends almost entirely on cached information and often will +not call into the filesystem at all. However there are two places, +besides the already-mentioned component-name comparison, where the +file system might be included in RCU-walk, and it must know to be +careful. + +If the filesystem has non-standard permission-checking requirements - +such as a networked filesystem which may need to check with the server +- the ``i_op->permission`` interface might be called during RCU-walk. +In this case an extra "``MAY_NOT_BLOCK``" flag is passed so that it +knows not to sleep, but to return ``-ECHILD`` if it cannot complete +promptly. ``i_op->permission`` is given the inode pointer, not the +dentry, so it doesn't need to worry about further consistency checks. +However if it accesses any other filesystem data structures, it must +ensure they are safe to be accessed with only the ``rcu_read_lock()`` +held. This typically means they must be freed using ``kfree_rcu()`` or +similar. + +.. _READ_ONCE: https://lwn.net/Articles/624126/ + +If the filesystem may need to revalidate dcache entries, then +``d_op->d_revalidate`` may be called in RCU-walk too. This interface +*is* passed the dentry but does not have access to the ``inode`` or the +``seq`` number from the ``nameidata``, so it needs to be extra careful +when accessing fields in the dentry. This "extra care" typically +involves using `READ_ONCE() `_ to access fields, and verifying the +result is not NULL before using it. This pattern can be seen in +``nfs_lookup_revalidate()``. + +A pair of patterns +------------------ + +In various places in the details of REF-walk and RCU-walk, and also in +the big picture, there are a couple of related patterns that are worth +being aware of. + +The first is "try quickly and check, if that fails try slowly". We +can see that in the high-level approach of first trying RCU-walk and +then trying REF-walk, and in places where ``unlazy_walk()`` is used to +switch to REF-walk for the rest of the path. We also saw it earlier +in ``dget_parent()`` when following a "``..``" link. It tries a quick way +to get a reference, then falls back to taking locks if needed. + +The second pattern is "try quickly and check, if that fails try +again - repeatedly". This is seen with the use of ``rename_lock`` and +``mount_lock`` in REF-walk. RCU-walk doesn't make use of this pattern - +if anything goes wrong it is much safer to just abort and try a more +sedate approach. + +The emphasis here is "try quickly and check". It should probably be +"try quickly *and carefully*, then check". The fact that checking is +needed is a reminder that the system is dynamic and only a limited +number of things are safe at all. The most likely cause of errors in +this whole process is assuming something is safe when in reality it +isn't. Careful consideration of what exactly guarantees the safety of +each access is sometimes necessary. + +A walk among the symlinks +========================= + +There are several basic issues that we will examine to understand the +handling of symbolic links: the symlink stack, together with cache +lifetimes, will help us understand the overall recursive handling of +symlinks and lead to the special care needed for the final component. +Then a consideration of access-time updates and summary of the various +flags controlling lookup will finish the story. + +The symlink stack +----------------- + +There are only two sorts of filesystem objects that can usefully +appear in a path prior to the final component: directories and symlinks. +Handling directories is quite straightforward: the new directory +simply becomes the starting point at which to interpret the next +component on the path. Handling symbolic links requires a bit more +work. + +Conceptually, symbolic links could be handled by editing the path. If +a component name refers to a symbolic link, then that component is +replaced by the body of the link and, if that body starts with a '/', +then all preceding parts of the path are discarded. This is what the +"``readlink -f``" command does, though it also edits out "``.``" and +"``..``" components. + +Directly editing the path string is not really necessary when looking +up a path, and discarding early components is pointless as they aren't +looked at anyway. Keeping track of all remaining components is +important, but they can of course be kept separately; there is no need +to concatenate them. As one symlink may easily refer to another, +which in turn can refer to a third, we may need to keep the remaining +components of several paths, each to be processed when the preceding +ones are completed. These path remnants are kept on a stack of +limited size. + +There are two reasons for placing limits on how many symlinks can +occur in a single path lookup. The most obvious is to avoid loops. +If a symlink referred to itself either directly or through +intermediaries, then following the symlink can never complete +successfully - the error ``ELOOP`` must be returned. Loops can be +detected without imposing limits, but limits are the simplest solution +and, given the second reason for restriction, quite sufficient. + +.. _outlined recently: http://thread.gmane.org/gmane.linux.kernel/1934390/focus=1934550 + +The second reason was `outlined recently`_ by Linus: + + Because it's a latency and DoS issue too. We need to react well to + true loops, but also to "very deep" non-loops. It's not about memory + use, it's about users triggering unreasonable CPU resources. + +Linux imposes a limit on the length of any pathname: ``PATH_MAX``, which +is 4096. There are a number of reasons for this limit; not letting the +kernel spend too much time on just one path is one of them. With +symbolic links you can effectively generate much longer paths so some +sort of limit is needed for the same reason. Linux imposes a limit of +at most 40 (MAXSYMLINKS) symlinks in any one path lookup. It previously imposed +a further limit of eight on the maximum depth of recursion, but that was +raised to 40 when a separate stack was implemented, so there is now +just the one limit. + +The ``nameidata`` structure that we met in an earlier article contains a +small stack that can be used to store the remaining part of up to two +symlinks. In many cases this will be sufficient. If it isn't, a +separate stack is allocated with room for 40 symlinks. Pathname +lookup will never exceed that stack as, once the 40th symlink is +detected, an error is returned. + +It might seem that the name remnants are all that needs to be stored on +this stack, but we need a bit more. To see that, we need to move on to +cache lifetimes. + +Storage and lifetime of cached symlinks +--------------------------------------- + +Like other filesystem resources, such as inodes and directory +entries, symlinks are cached by Linux to avoid repeated costly access +to external storage. It is particularly important for RCU-walk to be +able to find and temporarily hold onto these cached entries, so that +it doesn't need to drop down into REF-walk. + +.. _object-oriented design pattern: https://lwn.net/Articles/446317/ + +While each filesystem is free to make its own choice, symlinks are +typically stored in one of two places. Short symlinks are often +stored directly in the inode. When a filesystem allocates a ``struct +inode`` it typically allocates extra space to store private data (a +common `object-oriented design pattern`_ in the kernel). This will +sometimes include space for a symlink. The other common location is +in the page cache, which normally stores the content of files. The +pathname in a symlink can be seen as the content of that symlink and +can easily be stored in the page cache just like file content. + +When neither of these is suitable, the next most likely scenario is +that the filesystem will allocate some temporary memory and copy or +construct the symlink content into that memory whenever it is needed. + +When the symlink is stored in the inode, it has the same lifetime as +the inode which, itself, is protected by RCU or by a counted reference +on the dentry. This means that the mechanisms that pathname lookup +uses to access the dcache and icache (inode cache) safely are quite +sufficient for accessing some cached symlinks safely. In these cases, +the ``i_link`` pointer in the inode is set to point to wherever the +symlink is stored and it can be accessed directly whenever needed. + +When the symlink is stored in the page cache or elsewhere, the +situation is not so straightforward. A reference on a dentry or even +on an inode does not imply any reference on cached pages of that +inode, and even an ``rcu_read_lock()`` is not sufficient to ensure that +a page will not disappear. So for these symlinks the pathname lookup +code needs to ask the filesystem to provide a stable reference and, +significantly, needs to release that reference when it is finished +with it. + +Taking a reference to a cache page is often possible even in RCU-walk +mode. It does require making changes to memory, which is best avoided, +but that isn't necessarily a big cost and it is better than dropping +out of RCU-walk mode completely. Even filesystems that allocate +space to copy the symlink into can use ``GFP_ATOMIC`` to often successfully +allocate memory without the need to drop out of RCU-walk. If a +filesystem cannot successfully get a reference in RCU-walk mode, it +must return ``-ECHILD`` and ``unlazy_walk()`` will be called to return to +REF-walk mode in which the filesystem is allowed to sleep. + +The place for all this to happen is the ``i_op->get_link()`` inode +method. This is called both in RCU-walk and REF-walk. In RCU-walk the +``dentry*`` argument is NULL, ``->get_link()`` can return -ECHILD to drop out of +RCU-walk. Much like the ``i_op->permission()`` method we +looked at previously, ``->get_link()`` would need to be careful that +all the data structures it references are safe to be accessed while +holding no counted reference, only the RCU lock. A callback +``struct delayed_called`` will be passed to ``->get_link()``: +file systems can set their own put_link function and argument through +set_delayed_call(). Later on, when VFS wants to put link, it will call +do_delayed_call() to invoke that callback function with the argument. + +In order for the reference to each symlink to be dropped when the walk completes, +whether in RCU-walk or REF-walk, the symlink stack needs to contain, +along with the path remnants: + +- the ``struct path`` to provide a reference to the previous path +- the ``const char *`` to provide a reference to the to previous name +- the ``seq`` to allow the path to be safely switched from RCU-walk to REF-walk +- the ``struct delayed_call`` for later invocation. + +This means that each entry in the symlink stack needs to hold five +pointers and an integer instead of just one pointer (the path +remnant). On a 64-bit system, this is about 40 bytes per entry; +with 40 entries it adds up to 1600 bytes total, which is less than +half a page. So it might seem like a lot, but is by no means +excessive. + +Note that, in a given stack frame, the path remnant (``name``) is not +part of the symlink that the other fields refer to. It is the remnant +to be followed once that symlink has been fully parsed. + +Following the symlink +--------------------- + +The main loop in ``link_path_walk()`` iterates seamlessly over all +components in the path and all of the non-final symlinks. As symlinks +are processed, the ``name`` pointer is adjusted to point to a new +symlink, or is restored from the stack, so that much of the loop +doesn't need to notice. Getting this ``name`` variable on and off the +stack is very straightforward; pushing and popping the references is +a little more complex. + +When a symlink is found, walk_component() calls pick_link() via step_into() +which returns the link from the filesystem. +Providing that operation is successful, the old path ``name`` is placed on the +stack, and the new value is used as the ``name`` for a while. When the end of +the path is found (i.e. ``*name`` is ``'\0'``) the old ``name`` is restored +off the stack and path walking continues. + +Pushing and popping the reference pointers (inode, cookie, etc.) is more +complex in part because of the desire to handle tail recursion. When +the last component of a symlink itself points to a symlink, we +want to pop the symlink-just-completed off the stack before pushing +the symlink-just-found to avoid leaving empty path remnants that would +just get in the way. + +It is most convenient to push the new symlink references onto the +stack in ``walk_component()`` immediately when the symlink is found; +``walk_component()`` is also the last piece of code that needs to look at the +old symlink as it walks that last component. So it is quite +convenient for ``walk_component()`` to release the old symlink and pop +the references just before pushing the reference information for the +new symlink. It is guided in this by three flags: ``WALK_NOFOLLOW`` which +forbids it from following a symlink if it finds one, ``WALK_MORE`` +which indicates that it is yet too early to release the +current symlink, and ``WALK_TRAILING`` which indicates that it is on the final +component of the lookup, so we will check userspace flag ``LOOKUP_FOLLOW`` to +decide whether follow it when it is a symlink and call ``may_follow_link()`` to +check if we have privilege to follow it. + +Symlinks with no final component +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A pair of special-case symlinks deserve a little further explanation. +Both result in a new ``struct path`` (with mount and dentry) being set +up in the ``nameidata``, and result in pick_link() returning ``NULL``. + +The more obvious case is a symlink to "``/``". All symlinks starting +with "``/``" are detected in pick_link() which resets the ``nameidata`` +to point to the effective filesystem root. If the symlink only +contains "``/``" then there is nothing more to do, no components at all, +so ``NULL`` is returned to indicate that the symlink can be released and +the stack frame discarded. + +The other case involves things in ``/proc`` that look like symlinks but +aren't really (and are therefore commonly referred to as "magic-links"):: + + $ ls -l /proc/self/fd/1 + lrwx------ 1 neilb neilb 64 Jun 13 10:19 /proc/self/fd/1 -> /dev/pts/4 + +Every open file descriptor in any process is represented in ``/proc`` by +something that looks like a symlink. It is really a reference to the +target file, not just the name of it. When you ``readlink`` these +objects you get a name that might refer to the same file - unless it +has been unlinked or mounted over. When ``walk_component()`` follows +one of these, the ``->get_link()`` method in "procfs" doesn't return +a string name, but instead calls nd_jump_link() which updates the +``nameidata`` in place to point to that target. ``->get_link()`` then +returns ``NULL``. Again there is no final component and pick_link() +returns ``NULL``. + +Following the symlink in the final component +-------------------------------------------- + +All this leads to ``link_path_walk()`` walking down every component, and +following all symbolic links it finds, until it reaches the final +component. This is just returned in the ``last`` field of ``nameidata``. +For some callers, this is all they need; they want to create that +``last`` name if it doesn't exist or give an error if it does. Other +callers will want to follow a symlink if one is found, and possibly +apply special handling to the last component of that symlink, rather +than just the last component of the original file name. These callers +potentially need to call ``link_path_walk()`` again and again on +successive symlinks until one is found that doesn't point to another +symlink. + +This case is handled by relevant callers of link_path_walk(), such as +path_lookupat(), path_openat() using a loop that calls link_path_walk(), +and then handles the final component by calling open_last_lookups() or +lookup_last(). If it is a symlink that needs to be followed, +open_last_lookups() or lookup_last() will set things up properly and +return the path so that the loop repeats, calling +link_path_walk() again. This could loop as many as 40 times if the last +component of each symlink is another symlink. + +Of the various functions that examine the final component, +open_last_lookups() is the most interesting as it works in tandem +with do_open() for opening a file. Part of open_last_lookups() runs +with ``i_rwsem`` held and this part is in a separate function: lookup_open(). + +Explaining open_last_lookups() and do_open() completely is beyond the scope +of this article, but a few highlights should help those interested in exploring +the code. + +1. Rather than just finding the target file, do_open() is used after + open_last_lookup() to open + it. If the file was found in the dcache, then ``vfs_open()`` is used for + this. If not, then ``lookup_open()`` will either call ``atomic_open()`` (if + the filesystem provides it) to combine the final lookup with the open, or + will perform the separate ``i_op->lookup()`` and ``i_op->create()`` steps + directly. In the later case the actual "open" of this newly found or + created file will be performed by vfs_open(), just as if the name + were found in the dcache. + +2. vfs_open() can fail with ``-EOPENSTALE`` if the cached information + wasn't quite current enough. If it's in RCU-walk ``-ECHILD`` will be returned + otherwise ``-ESTALE`` is returned. When ``-ESTALE`` is returned, the caller may + retry with ``LOOKUP_REVAL`` flag set. + +3. An open with O_CREAT **does** follow a symlink in the final component, + unlike other creation system calls (like ``mkdir``). So the sequence:: + + ln -s bar /tmp/foo + echo hello > /tmp/foo + + will create a file called ``/tmp/bar``. This is not permitted if + ``O_EXCL`` is set but otherwise is handled for an O_CREAT open much + like for a non-creating open: lookup_last() or open_last_lookup() + returns a non ``NULL`` value, and link_path_walk() gets called and the + open process continues on the symlink that was found. + +Updating the access time +------------------------ + +We previously said of RCU-walk that it would "take no locks, increment +no counts, leave no footprints." We have since seen that some +"footprints" can be needed when handling symlinks as a counted +reference (or even a memory allocation) may be needed. But these +footprints are best kept to a minimum. + +One other place where walking down a symlink can involve leaving +footprints in a way that doesn't affect directories is in updating access times. +In Unix (and Linux) every filesystem object has a "last accessed +time", or "``atime``". Passing through a directory to access a file +within is not considered to be an access for the purposes of +``atime``; only listing the contents of a directory can update its ``atime``. +Symlinks are different it seems. Both reading a symlink (with ``readlink()``) +and looking up a symlink on the way to some other destination can +update the atime on that symlink. + +.. _clearest statement: https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap04.html#tag_04_08 + +It is not clear why this is the case; POSIX has little to say on the +subject. The `clearest statement`_ is that, if a particular implementation +updates a timestamp in a place not specified by POSIX, this must be +documented "except that any changes caused by pathname resolution need +not be documented". This seems to imply that POSIX doesn't really +care about access-time updates during pathname lookup. + +.. _Linux 1.3.87: https://git.kernel.org/cgit/linux/kernel/git/history/history.git/diff/fs/ext2/symlink.c?id=f806c6db77b8eaa6e00dcfb6b567706feae8dbb8 + +An examination of history shows that prior to `Linux 1.3.87`_, the ext2 +filesystem, at least, didn't update atime when following a link. +Unfortunately we have no record of why that behavior was changed. + +In any case, access time must now be updated and that operation can be +quite complex. Trying to stay in RCU-walk while doing it is best +avoided. Fortunately it is often permitted to skip the ``atime`` +update. Because ``atime`` updates cause performance problems in various +areas, Linux supports the ``relatime`` mount option, which generally +limits the updates of ``atime`` to once per day on files that aren't +being changed (and symlinks never change once created). Even without +``relatime``, many filesystems record ``atime`` with a one-second +granularity, so only one update per second is required. + +It is easy to test if an ``atime`` update is needed while in RCU-walk +mode and, if it isn't, the update can be skipped and RCU-walk mode +continues. Only when an ``atime`` update is actually required does the +path walk drop down to REF-walk. All of this is handled in the +``get_link()`` function. + +A few flags +----------- + +A suitable way to wrap up this tour of pathname walking is to list +the various flags that can be stored in the ``nameidata`` to guide the +lookup process. Many of these are only meaningful on the final +component, others reflect the current state of the pathname lookup, and some +apply restrictions to all path components encountered in the path lookup. + +And then there is ``LOOKUP_EMPTY``, which doesn't fit conceptually with +the others. If this is not set, an empty pathname causes an error +very early on. If it is set, empty pathnames are not considered to be +an error. + +Global state flags +~~~~~~~~~~~~~~~~~~ + +We have already met two global state flags: ``LOOKUP_RCU`` and +``LOOKUP_REVAL``. These select between one of three overall approaches +to lookup: RCU-walk, REF-walk, and REF-walk with forced revalidation. + +``LOOKUP_PARENT`` indicates that the final component hasn't been reached +yet. This is primarily used to tell the audit subsystem the full +context of a particular access being audited. + +``ND_ROOT_PRESET`` indicates that the ``root`` field in the ``nameidata`` was +provided by the caller, so it shouldn't be released when it is no +longer needed. + +``ND_JUMPED`` means that the current dentry was chosen not because +it had the right name but for some other reason. This happens when +following "``..``", following a symlink to ``/``, crossing a mount point +or accessing a "``/proc/$PID/fd/$FD``" symlink (also known as a "magic +link"). In this case the filesystem has not been asked to revalidate the +name (with ``d_revalidate()``). In such cases the inode may still need +to be revalidated, so ``d_op->d_weak_revalidate()`` is called if +``ND_JUMPED`` is set when the look completes - which may be at the +final component or, when creating, unlinking, or renaming, at the penultimate component. + +Resolution-restriction flags +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In order to allow userspace to protect itself against certain race conditions +and attack scenarios involving changing path components, a series of flags are +available which apply restrictions to all path components encountered during +path lookup. These flags are exposed through ``openat2()``'s ``resolve`` field. + +``LOOKUP_NO_SYMLINKS`` blocks all symlink traversals (including magic-links). +This is distinctly different from ``LOOKUP_FOLLOW``, because the latter only +relates to restricting the following of trailing symlinks. + +``LOOKUP_NO_MAGICLINKS`` blocks all magic-link traversals. Filesystems must +ensure that they return errors from ``nd_jump_link()``, because that is how +``LOOKUP_NO_MAGICLINKS`` and other magic-link restrictions are implemented. + +``LOOKUP_NO_XDEV`` blocks all ``vfsmount`` traversals (this includes both +bind-mounts and ordinary mounts). Note that the ``vfsmount`` which contains the +lookup is determined by the first mountpoint the path lookup reaches -- +absolute paths start with the ``vfsmount`` of ``/``, and relative paths start +with the ``dfd``'s ``vfsmount``. Magic-links are only permitted if the +``vfsmount`` of the path is unchanged. + +``LOOKUP_BENEATH`` blocks any path components which resolve outside the +starting point of the resolution. This is done by blocking ``nd_jump_root()`` +as well as blocking ".." if it would jump outside the starting point. +``rename_lock`` and ``mount_lock`` are used to detect attacks against the +resolution of "..". Magic-links are also blocked. + +``LOOKUP_IN_ROOT`` resolves all path components as though the starting point +were the filesystem root. ``nd_jump_root()`` brings the resolution back to +the starting point, and ".." at the starting point will act as a no-op. As with +``LOOKUP_BENEATH``, ``rename_lock`` and ``mount_lock`` are used to detect +attacks against ".." resolution. Magic-links are also blocked. + +Final-component flags +~~~~~~~~~~~~~~~~~~~~~ + +Some of these flags are only set when the final component is being +considered. Others are only checked for when considering that final +component. + +``LOOKUP_AUTOMOUNT`` ensures that, if the final component is an automount +point, then the mount is triggered. Some operations would trigger it +anyway, but operations like ``stat()`` deliberately don't. ``statfs()`` +needs to trigger the mount but otherwise behaves a lot like ``stat()``, so +it sets ``LOOKUP_AUTOMOUNT``, as does "``quotactl()``" and the handling of +"``mount --bind``". + +``LOOKUP_FOLLOW`` has a similar function to ``LOOKUP_AUTOMOUNT`` but for +symlinks. Some system calls set or clear it implicitly, while +others have API flags such as ``AT_SYMLINK_FOLLOW`` and +``UMOUNT_NOFOLLOW`` to control it. Its effect is similar to +``WALK_GET`` that we already met, but it is used in a different way. + +``LOOKUP_DIRECTORY`` insists that the final component is a directory. +Various callers set this and it is also set when the final component +is found to be followed by a slash. + +Finally ``LOOKUP_OPEN``, ``LOOKUP_CREATE``, ``LOOKUP_EXCL``, and +``LOOKUP_RENAME_TARGET`` are not used directly by the VFS but are made +available to the filesystem and particularly the ``->d_revalidate()`` +method. A filesystem can choose not to bother revalidating too hard +if it knows that it will be asked to open or create the file soon. +These flags were previously useful for ``->lookup()`` too but with the +introduction of ``->atomic_open()`` they are less relevant there. + +End of the road +--------------- + +Despite its complexity, all this pathname lookup code appears to be +in good shape - various parts are certainly easier to understand now +than even a couple of releases ago. But that doesn't mean it is +"finished". As already mentioned, RCU-walk currently only follows +symlinks that are stored in the inode so, while it handles many ext4 +symlinks, it doesn't help with NFS, XFS, or Btrfs. That support +is not likely to be long delayed. -- cgit v1.2.3