From 6d03a247468059b0e59c821ef39e6762d4d6fc30 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 19 Jun 2024 23:00:51 +0200 Subject: Merging upstream version 6.9.2. Signed-off-by: Daniel Baumann --- Documentation/firmware-guide/acpi/apei/einj.rst | 34 +++++++++ Documentation/firmware-guide/acpi/enumeration.rst | 12 +-- Documentation/firmware-guide/acpi/index.rst | 1 - .../firmware-guide/acpi/method-customizing.rst | 89 ---------------------- 4 files changed, 40 insertions(+), 96 deletions(-) delete mode 100644 Documentation/firmware-guide/acpi/method-customizing.rst (limited to 'Documentation/firmware-guide/acpi') diff --git a/Documentation/firmware-guide/acpi/apei/einj.rst b/Documentation/firmware-guide/acpi/apei/einj.rst index d6b61d22f5..c52b9da08f 100644 --- a/Documentation/firmware-guide/acpi/apei/einj.rst +++ b/Documentation/firmware-guide/acpi/apei/einj.rst @@ -32,6 +32,10 @@ configuration:: CONFIG_ACPI_APEI CONFIG_ACPI_APEI_EINJ +...and to (optionally) enable CXL protocol error injection set:: + + CONFIG_ACPI_APEI_EINJ_CXL + The EINJ user interface is in /apei/einj. The following files belong to it: @@ -118,6 +122,24 @@ The following files belong to it: this actually works depends on what operations the BIOS actually includes in the trigger phase. +CXL error types are supported from ACPI 6.5 onwards (given a CXL port +is present). The EINJ user interface for CXL error types is at +/cxl. The following files belong to it: + +- einj_types: + + Provides the same functionality as available_error_types above, but + for CXL error types + +- $dport_dev/einj_inject: + + Injects a CXL error type into the CXL port represented by $dport_dev, + where $dport_dev is the name of the CXL port (usually a PCIe device name). + Error injections targeting a CXL 2.0+ port can use the legacy interface + under /apei/einj, while CXL 1.1/1.0 port injections + must use this file. + + BIOS versions based on the ACPI 4.0 specification have limited options in controlling where the errors are injected. Your BIOS may support an extension (enabled with the param_extension=1 module parameter, or boot @@ -181,6 +203,18 @@ You should see something like this in dmesg:: [22715.834759] EDAC sbridge MC3: PROCESSOR 0:306e7 TIME 1422553404 SOCKET 0 APIC 0 [22716.616173] EDAC MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x12345 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0) +A CXL error injection example with $dport_dev=0000:e0:01.1:: + + # cd /sys/kernel/debug/cxl/ + # ls + 0000:e0:01.1 0000:0c:00.0 + # cat einj_types # See which errors can be injected + 0x00008000 CXL.mem Protocol Correctable + 0x00010000 CXL.mem Protocol Uncorrectable non-fatal + 0x00020000 CXL.mem Protocol Uncorrectable fatal + # cd 0000:e0:01.1 # Navigate to dport to inject into + # echo 0x8000 > einj_inject # Inject error + Special notes for injection into SGX enclaves: There may be a separate BIOS setup option to enable SGX injection. diff --git a/Documentation/firmware-guide/acpi/enumeration.rst b/Documentation/firmware-guide/acpi/enumeration.rst index d79f693909..0165b09c09 100644 --- a/Documentation/firmware-guide/acpi/enumeration.rst +++ b/Documentation/firmware-guide/acpi/enumeration.rst @@ -595,7 +595,7 @@ bridges/switches of the board. For example, let's assume we have a system with a PCIe serial port, an Exar XR17V3521, soldered on the main board. This UART chip also includes -16 GPIOs and we want to add the property ``gpio-line-names`` [1] to these pins. +16 GPIOs and we want to add the property ``gpio-line-names`` [1]_ to these pins. In this case, the ``lspci`` output for this component is:: 07:00.0 Serial controller: Exar Corp. XR17V3521 Dual PCIe UART (rev 03) @@ -637,7 +637,7 @@ of the chipset bridge (also called "root port") with address:: Bus: 0 - Device: 14 - Function: 1 To find this information, it is necessary to disassemble the BIOS ACPI tables, -in particular the DSDT (see also [2]):: +in particular the DSDT (see also [2]_):: mkdir ~/tables/ cd ~/tables/ @@ -667,7 +667,7 @@ device:: } ... other definitions follow ... -and the _ADR method [3] returns exactly the device/function couple that +and the _ADR method [3]_ returns exactly the device/function couple that we are looking for. With this information and analyzing the above ``lspci`` output (both the devices list and the devices tree), we can write the following ACPI description for the Exar PCIe UART, also adding the list of its GPIO line @@ -724,10 +724,10 @@ created analyzing the position of the Exar UART in the PCI bus topology. References ========== -[1] Documentation/firmware-guide/acpi/gpio-properties.rst +.. [1] Documentation/firmware-guide/acpi/gpio-properties.rst -[2] Documentation/admin-guide/acpi/initrd_table_override.rst +.. [2] Documentation/admin-guide/acpi/initrd_table_override.rst -[3] ACPI Specifications, Version 6.3 - Paragraph 6.1.1 _ADR Address) +.. [3] ACPI Specifications, Version 6.3 - Paragraph 6.1.1 _ADR Address) https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf, referenced 2020-11-18 diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst index b6a42f4ffe..b246902f52 100644 --- a/Documentation/firmware-guide/acpi/index.rst +++ b/Documentation/firmware-guide/acpi/index.rst @@ -14,7 +14,6 @@ ACPI Support dsd/phy enumeration osi - method-customizing method-tracing DSD-properties-rules debug diff --git a/Documentation/firmware-guide/acpi/method-customizing.rst b/Documentation/firmware-guide/acpi/method-customizing.rst deleted file mode 100644 index de3ebcaed4..0000000000 --- a/Documentation/firmware-guide/acpi/method-customizing.rst +++ /dev/null @@ -1,89 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -======================================= -Linux ACPI Custom Control Method How To -======================================= - -:Author: Zhang Rui - - -Linux supports customizing ACPI control methods at runtime. - -Users can use this to: - -1. override an existing method which may not work correctly, - or just for debugging purposes. -2. insert a completely new method in order to create a missing - method such as _OFF, _ON, _STA, _INI, etc. - -For these cases, it is far simpler to dynamically install a single -control method rather than override the entire DSDT, because kernel -rebuild/reboot is not needed and test result can be got in minutes. - -.. note:: - - - Only ACPI METHOD can be overridden, any other object types like - "Device", "OperationRegion", are not recognized. Methods - declared inside scope operators are also not supported. - - - The same ACPI control method can be overridden for many times, - and it's always the latest one that used by Linux/kernel. - - - To get the ACPI debug object output (Store (AAAA, Debug)), - please run:: - - echo 1 > /sys/module/acpi/parameters/aml_debug_output - - -1. override an existing method -============================== -a) get the ACPI table via ACPI sysfs I/F. e.g. to get the DSDT, - just run "cat /sys/firmware/acpi/tables/DSDT > /tmp/dsdt.dat" -b) disassemble the table by running "iasl -d dsdt.dat". -c) rewrite the ASL code of the method and save it in a new file, -d) package the new file (psr.asl) to an ACPI table format. - Here is an example of a customized \_SB._AC._PSR method:: - - DefinitionBlock ("", "SSDT", 1, "", "", 0x20080715) - { - Method (\_SB_.AC._PSR, 0, NotSerialized) - { - Store ("In AC _PSR", Debug) - Return (ACON) - } - } - - Note that the full pathname of the method in ACPI namespace - should be used. -e) assemble the file to generate the AML code of the method. - e.g. "iasl -vw 6084 psr.asl" (psr.aml is generated as a result) - If parameter "-vw 6084" is not supported by your iASL compiler, - please try a newer version. -f) mount debugfs by "mount -t debugfs none /sys/kernel/debug" -g) override the old method via the debugfs by running - "cat /tmp/psr.aml > /sys/kernel/debug/acpi/custom_method" - -2. insert a new method -====================== -This is easier than overriding an existing method. -We just need to create the ASL code of the method we want to -insert and then follow the step c) ~ g) in section 1. - -3. undo your changes -==================== -The "undo" operation is not supported for a new inserted method -right now, i.e. we can not remove a method currently. -For an overridden method, in order to undo your changes, please -save a copy of the method original ASL code in step c) section 1, -and redo step c) ~ g) to override the method with the original one. - - -.. note:: We can use a kernel with multiple custom ACPI method running, - But each individual write to debugfs can implement a SINGLE - method override. i.e. if we want to insert/override multiple - ACPI methods, we need to redo step c) ~ g) for multiple times. - -.. note:: Be aware that root can mis-use this driver to modify arbitrary - memory and gain additional rights, if root's privileges got - restricted (for example if root is not allowed to load additional - modules after boot). -- cgit v1.2.3