From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- Documentation/hwmon/adm1275.rst | 148 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 148 insertions(+) create mode 100644 Documentation/hwmon/adm1275.rst (limited to 'Documentation/hwmon/adm1275.rst') diff --git a/Documentation/hwmon/adm1275.rst b/Documentation/hwmon/adm1275.rst new file mode 100644 index 000000000..804590eea --- /dev/null +++ b/Documentation/hwmon/adm1275.rst @@ -0,0 +1,148 @@ +Kernel driver adm1275 +===================== + +Supported chips: + + * Analog Devices ADM1075 + + Prefix: 'adm1075' + + Addresses scanned: - + + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf + + * Analog Devices ADM1272 + + Prefix: 'adm1272' + + Addresses scanned: - + + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1272.pdf + + * Analog Devices ADM1275 + + Prefix: 'adm1275' + + Addresses scanned: - + + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf + + * Analog Devices ADM1276 + + Prefix: 'adm1276' + + Addresses scanned: - + + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf + + * Analog Devices ADM1278 + + Prefix: 'adm1278' + + Addresses scanned: - + + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf + + * Analog Devices ADM1293/ADM1294 + + Prefix: 'adm1293', 'adm1294' + + Addresses scanned: - + + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf + +Author: Guenter Roeck + + +Description +----------- + +This driver supports hardware monitoring for Analog Devices ADM1075, ADM1272, +ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 Hot-Swap Controller and +Digital Power Monitors. + +ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 are hot-swap +controllers that allow a circuit board to be removed from or inserted into +a live backplane. They also feature current and voltage readback via an +integrated 12 bit analog-to-digital converter (ADC), accessed using a +PMBus interface. + +The driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for +details. + +The ADM1075, unlike many other PMBus devices, does not support internal voltage +or current scaling. Reported voltages, currents, and power are raw measurements, +and will typically have to be scaled. + +The shunt value in micro-ohms can be set via device tree at compile-time. Please +refer to the Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml for bindings +if the device tree is used. + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. Please see +Documentation/hwmon/pmbus.rst for details. + + +Sysfs entries +------------- + +The following attributes are supported. Limits are read-write, history reset +attributes are write-only, all other attributes are read-only. + +======================= ======================================================= +inX_label "vin1" or "vout1" depending on chip variant and + configuration. On ADM1075, ADM1293, and ADM1294, + vout1 reports the voltage on the VAUX pin. +inX_input Measured voltage. +inX_min Minimum Voltage. +inX_max Maximum voltage. +inX_min_alarm Voltage low alarm. +inX_max_alarm Voltage high alarm. +inX_highest Historical maximum voltage. +inX_reset_history Write any value to reset history. + +curr1_label "iout1" +curr1_input Measured current. +curr1_max Maximum current. +curr1_max_alarm Current high alarm. +curr1_lcrit Critical minimum current. Depending on the chip + configuration, either curr1_lcrit or curr1_crit is + supported, but not both. +curr1_lcrit_alarm Critical current low alarm. +curr1_crit Critical maximum current. Depending on the chip + configuration, either curr1_lcrit or curr1_crit is + supported, but not both. +curr1_crit_alarm Critical current high alarm. +curr1_highest Historical maximum current. +curr1_reset_history Write any value to reset history. + +power1_label "pin1" +power1_input Input power. +power1_input_lowest Lowest observed input power. ADM1293 and ADM1294 only. +power1_input_highest Highest observed input power. +power1_reset_history Write any value to reset history. + + Power attributes are supported on ADM1075, ADM1272, + ADM1276, ADM1293, and ADM1294. + +temp1_input Chip temperature. +temp1_max Maximum chip temperature. +temp1_max_alarm Temperature alarm. +temp1_crit Critical chip temperature. +temp1_crit_alarm Critical temperature high alarm. +temp1_highest Highest observed temperature. +temp1_reset_history Write any value to reset history. + + Temperature attributes are supported on ADM1272 and + ADM1278. +======================= ======================================================= -- cgit v1.2.3