From 01a69402cf9d38ff180345d55c2ee51c7e89fbc7 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 18 May 2024 20:50:03 +0200 Subject: Adding upstream version 6.8.9. Signed-off-by: Daniel Baumann --- Documentation/hwmon/mp2856.rst | 98 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 98 insertions(+) create mode 100644 Documentation/hwmon/mp2856.rst (limited to 'Documentation/hwmon/mp2856.rst') diff --git a/Documentation/hwmon/mp2856.rst b/Documentation/hwmon/mp2856.rst new file mode 100644 index 0000000000..af625c22b6 --- /dev/null +++ b/Documentation/hwmon/mp2856.rst @@ -0,0 +1,98 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp2856 +==================== + +Supported chips: + + * MPS MP2856 + + Prefix: 'mp2856' + + * MPS MP2857 + + Prefix: 'mp2857' + +Author: + + Peter Yin + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +vendor dual-loop, digital, multi-phase controller MP2856/MP2857 + +This device: + +- Supports up to two power rail. +- Supports two pages 0 and 1 for and also pages 2 for configuration. +- Can configured VOUT readout in direct or VID format and allows + setting of different formats on rails 1 and 2. For VID the following + protocols are available: AMD SVI3 mode with 5-mV/LSB. + +Device supports: + +- SVID interface. +- AVSBus interface. + +Device compliant with: + +- PMBus rev 1.3 interface. + +Device supports direct format for reading output current, output voltage, +input and output power and temperature. +Device supports linear format for reading input voltage and input power. +Device supports VID and direct formats for reading output voltage. +The below VID modes are supported: AMD SVI3. + +The driver provides the following sysfs attributes for current measurements: + +- indexes 1 for "iin"; +- indexes 2, 3 for "iout"; + +**curr[1-3]_alarm** + +**curr[1-3]_input** + +**curr[1-3]_label** + +The driver provides the following sysfs attributes for voltage measurements. + +- indexes 1 for "vin"; +- indexes 2, 3 for "vout"; + +**in[1-3]_crit** + +**in[1-3]_crit_alarm** + +**in[1-3]_input** + +**in[1-3]_label** + +**in[1-3]_lcrit** + +**in[1-3]_lcrit_alarm** + +The driver provides the following sysfs attributes for power measurements. + +- indexes 1 for "pin"; +- indexes 2, 3 for "pout"; + +**power[1-3]_alarm** + +**power[1-3]_input** + +**power[1-3]_label** + +The driver provides the following sysfs attributes for temperature measurements. + +**temp[1-2]_crit** + +**temp[1-2]_crit_alarm** + +**temp[1-2]_input** + +**temp[1-2]_max** + +**temp[1-2]_max_alarm** -- cgit v1.2.3