From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- Documentation/hwmon/sbtsi_temp.rst | 42 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/hwmon/sbtsi_temp.rst (limited to 'Documentation/hwmon/sbtsi_temp.rst') diff --git a/Documentation/hwmon/sbtsi_temp.rst b/Documentation/hwmon/sbtsi_temp.rst new file mode 100644 index 000000000..749f51838 --- /dev/null +++ b/Documentation/hwmon/sbtsi_temp.rst @@ -0,0 +1,42 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver sbtsi_temp +======================== + +Supported hardware: + + * Sideband interface (SBI) Temperature Sensor Interface (SB-TSI) + compliant AMD SoC temperature device. + + Prefix: 'sbtsi_temp' + + Addresses scanned: This driver doesn't support address scanning. + + To instantiate this driver on an AMD CPU with SB-TSI + support, the i2c bus number would be the bus connected from the board + management controller (BMC) to the CPU. The i2c address is specified in + Section 6.3.1 of the SoC register reference: The SB-TSI address is normally + 98h for socket 0 and 90h for socket 1, but it could vary based on hardware + address select pins. + + Datasheet: The SB-TSI interface and protocol is available as part of + the open source SoC register reference at: + + https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf + + The Advanced Platform Management Link (APML) Specification is + available at: + + http://developer.amd.com/wordpress/media/2012/10/41918.pdf + +Author: Kun Yi + +Description +----------- + +The SBI temperature sensor interface (SB-TSI) is an emulation of the software +and physical interface of a typical 8-pin remote temperature sensor (RTS) on +AMD SoCs. It implements one temperature sensor with readings and limit +registers encode the temperature in increments of 0.125 from 0 to 255.875. +Limits can be set through the writable thresholds, and if reached will trigger +corresponding alert signals. -- cgit v1.2.3