From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- Documentation/hwmon/shtc1.rst | 67 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/hwmon/shtc1.rst (limited to 'Documentation/hwmon/shtc1.rst') diff --git a/Documentation/hwmon/shtc1.rst b/Documentation/hwmon/shtc1.rst new file mode 100644 index 0000000000..f38c4c9d2f --- /dev/null +++ b/Documentation/hwmon/shtc1.rst @@ -0,0 +1,67 @@ +Kernel driver shtc1 +=================== + +Supported chips: + + * Sensirion SHTC1 + + Prefix: 'shtc1' + + Addresses scanned: none + + Datasheet: https://www.sensirion.com/file/datasheet_shtc1 + + + + * Sensirion SHTW1 + + Prefix: 'shtw1' + + Addresses scanned: none + + Datasheet: https://www.sensirion.com/file/datasheet_shtw1 + + + + * Sensirion SHTC3 + + Prefix: 'shtc3' + + Addresses scanned: none + + Datasheet: https://www.sensirion.com/file/datasheet_shtc3 + + + +Author: + + Johannes Winkelmann + +Description +----------- + +This driver implements support for the Sensirion SHTC1, SHTW1, and SHTC3 +chips, a humidity and temperature sensor. Temperature is measured in degrees +celsius, relative humidity is expressed as a percentage. + +The device communicates with the I2C protocol. All sensors are set to I2C +address 0x70. See Documentation/i2c/instantiating-devices.rst for methods to +instantiate the device. + +There are two options configurable by means of shtc1_platform_data: + +1. blocking (pull the I2C clock line down while performing the measurement) or + non-blocking mode. Blocking mode will guarantee the fastest result but + the I2C bus will be busy during that time. By default, non-blocking mode + is used. Make sure clock-stretching works properly on your device if you + want to use blocking mode. +2. high or low accuracy. High accuracy is used by default and using it is + strongly recommended. + +sysfs-Interface +--------------- + +temp1_input + - temperature input +humidity1_input + - humidity input -- cgit v1.2.3