From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- Documentation/hwmon/tmp421.rst | 76 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+) create mode 100644 Documentation/hwmon/tmp421.rst (limited to 'Documentation/hwmon/tmp421.rst') diff --git a/Documentation/hwmon/tmp421.rst b/Documentation/hwmon/tmp421.rst new file mode 100644 index 0000000000..a3002117bb --- /dev/null +++ b/Documentation/hwmon/tmp421.rst @@ -0,0 +1,76 @@ +Kernel driver tmp421 +==================== + +Supported chips: + + * Texas Instruments TMP421 + + Prefix: 'tmp421' + + Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f + + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html + + * Texas Instruments TMP422 + + Prefix: 'tmp422' + + Addresses scanned: I2C 0x4c, 0x4d, 0x4e and 0x4f + + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html + + * Texas Instruments TMP423 + + Prefix: 'tmp423' + + Addresses scanned: I2C 0x4c and 0x4d + + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html + + * Texas Instruments TMP441 + + Prefix: 'tmp441' + + Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f + + Datasheet: https://www.ti.com/product/tmp441 + + * Texas Instruments TMP442 + + Prefix: 'tmp442' + + Addresses scanned: I2C 0x4c and 0x4d + + Datasheet: https://www.ti.com/product/tmp442 + +Authors: + + Andre Prendel + +Description +----------- + +This driver implements support for Texas Instruments TMP421, TMP422, +TMP423, TMP441, and TMP442 temperature sensor chips. These chips +implement one local and up to one (TMP421, TMP441), up to two (TMP422, +TMP442) or up to three (TMP423) remote sensors. Temperature is measured +in degrees Celsius. The chips are wired over I2C/SMBus and specified +over a temperature range of -40 to +125 degrees Celsius. Resolution +for both the local and remote channels is 0.0625 degree C. + +The chips support only temperature measurement. The driver exports +the temperature values via the following sysfs files: + +**temp[1-4]_input** + +**temp[2-4]_fault** + +Each sensor can be individually disabled via Devicetree or from sysfs +via: + +**temp[1-4]_enable** + +If labels were specified in Devicetree, additional sysfs files will +be present: + +**temp[1-4]_label** -- cgit v1.2.3