From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- Documentation/hwmon/zl6100.rst | 259 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 259 insertions(+) create mode 100644 Documentation/hwmon/zl6100.rst (limited to 'Documentation/hwmon/zl6100.rst') diff --git a/Documentation/hwmon/zl6100.rst b/Documentation/hwmon/zl6100.rst new file mode 100644 index 0000000000..d42ed9d3ac --- /dev/null +++ b/Documentation/hwmon/zl6100.rst @@ -0,0 +1,259 @@ +Kernel driver zl6100 +==================== + +Supported chips: + + * Renesas / Intersil / Zilker Labs ZL2004 + + Prefix: 'zl2004' + + Addresses scanned: - + + Datasheet: https://www.renesas.com/us/en/document/dst/zl2004-datasheet.pdf + + * Renesas / Intersil / Zilker Labs ZL2005 + + Prefix: 'zl2005' + + Addresses scanned: - + + Datasheet: https://www.renesas.com/us/en/document/dst/zl2005-datasheet.pdf + + * Renesas / Intersil / Zilker Labs ZL2006 + + Prefix: 'zl2006' + + Addresses scanned: - + + Datasheet: https://www.renesas.com/us/en/document/dst/zl2006-datasheet.pdf + + * Renesas / Intersil / Zilker Labs ZL2008 + + Prefix: 'zl2008' + + Addresses scanned: - + + Datasheet: https://www.renesas.com/us/en/document/dst/zl2008-datasheet.pdf + + * Renesas / Intersil / Zilker Labs ZL2105 + + Prefix: 'zl2105' + + Addresses scanned: - + + Datasheet: https://www.renesas.com/us/en/document/dst/zl2105-datasheet.pdf + + * Renesas / Intersil / Zilker Labs ZL2106 + + Prefix: 'zl2106' + + Addresses scanned: - + + Datasheet: https://www.renesas.com/us/en/document/dst/zl2106-datasheet.pdf + + * Renesas / Intersil / Zilker Labs ZL6100 + + Prefix: 'zl6100' + + Addresses scanned: - + + Datasheet: https://www.renesas.com/us/en/document/dst/zl6100-datasheet.pdf + + * Renesas / Intersil / Zilker Labs ZL6105 + + Prefix: 'zl6105' + + Addresses scanned: - + + Datasheet: https://www.renesas.com/us/en/document/dst/zl6105-datasheet.pdf + + * Renesas / Intersil / Zilker Labs ZL8802 + + Prefix: 'zl8802' + + Addresses scanned: - + + Datasheet: https://www.renesas.com/us/en/document/dst/zl8802-datasheet + + * Renesas / Intersil / Zilker Labs ZL9101M + + Prefix: 'zl9101' + + Addresses scanned: - + + Datasheet: https://www.renesas.com/us/en/document/dst/zl9101m-datasheet + + * Renesas / Intersil / Zilker Labs ZL9117M + + Prefix: 'zl9117' + + Addresses scanned: - + + Datasheet: https://www.renesas.com/us/en/document/dst/zl9117m-datasheet + + * Renesas / Intersil / Zilker Labs ZLS1003, ZLS4009 + + Prefix: 'zls1003', zls4009 + + Addresses scanned: - + + Datasheet: Not published + + * Flex BMR450, BMR451 + + Prefix: 'bmr450', 'bmr451' + + Addresses scanned: - + + Datasheet: + +https://flexpowermodules.com/resources/fpm-techspec-bmr450-digital-pol-regulators-20a + + * Flex BMR462, BMR463, BMR464 + + Prefixes: 'bmr462', 'bmr463', 'bmr464' + + Addresses scanned: - + + Datasheet: https://flexpowermodules.com/resources/fpm-techspec-bmr462 + + * Flex BMR465, BMR467 + + Prefixes: 'bmr465', 'bmr467' + + Addresses scanned: - + + Datasheet: https://flexpowermodules.com/resources/fpm-techspec-bmr465-digital-pol + + * Flex BMR466 + + Prefixes: 'bmr466' + + Addresses scanned: - + + Datasheet: https://flexpowermodules.com/resources/fpm-techspec-bmr466-8x12 + + * Flex BMR469 + + Prefixes: 'bmr469' + + Addresses scanned: - + + Datasheet: https://flexpowermodules.com/resources/fpm-techspec-bmr4696001 + +Author: Guenter Roeck + + +Description +----------- + +This driver supports hardware monitoring for Renesas / Intersil / Zilker Labs +ZL6100 and compatible digital DC-DC controllers. + +The driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details +on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for +details. + +.. warning:: + + Do not access chip registers using the i2cdump command, and do not use + any of the i2ctools commands on a command register used to save and restore + configuration data (0x11, 0x12, 0x15, 0x16, and 0xf4). The chips supported by + this driver interpret any access to those command registers (including read + commands) as request to execute the command in question. Unless write accesses + to those registers are protected, this may result in power loss, board resets, + and/or Flash corruption. Worst case, your board may turn into a brick. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + + +Module parameters +----------------- + +delay +----- + +Renesas/Intersil/Zilker Labs DC-DC controllers require a minimum interval +between I2C bus accesses. According to Intersil, the minimum interval is 2 ms, +though 1 ms appears to be sufficient and has not caused any problems in testing. +The problem is known to affect all currently supported chips. For manual override, +the driver provides a writeable module parameter, 'delay', which can be used +to set the interval to a value between 0 and 65,535 microseconds. + + +Sysfs entries +------------- + +The following attributes are supported. Limits are read-write; all other +attributes are read-only. + +======================= ======================================================== +in1_label "vin" +in1_input Measured input voltage. +in1_min Minimum input voltage. +in1_max Maximum input voltage. +in1_lcrit Critical minimum input voltage. +in1_crit Critical maximum input voltage. +in1_min_alarm Input voltage low alarm. +in1_max_alarm Input voltage high alarm. +in1_lcrit_alarm Input voltage critical low alarm. +in1_crit_alarm Input voltage critical high alarm. + +in2_label "vmon" +in2_input Measured voltage on VMON (ZL2004) or VDRV (ZL9101M, + ZL9117M) pin. Reported voltage is 16x the voltage on the + pin (adjusted internally by the chip). +in2_lcrit Critical minimum VMON/VDRV Voltage. +in2_crit Critical maximum VMON/VDRV voltage. +in2_lcrit_alarm VMON/VDRV voltage critical low alarm. +in2_crit_alarm VMON/VDRV voltage critical high alarm. + + vmon attributes are supported on ZL2004, ZL8802, + ZL9101M, ZL9117M and ZLS4009 only. + +inX_label "vout[12]" +inX_input Measured output voltage. +inX_lcrit Critical minimum output Voltage. +inX_crit Critical maximum output voltage. +inX_lcrit_alarm Critical output voltage critical low alarm. +inX_crit_alarm Critical output voltage critical high alarm. + + X is 3 for ZL2004, ZL9101M, and ZL9117M, + 3, 4 for ZL8802 and 2 otherwise. + +curr1_label "iin" +curr1_input Measured input current. + + iin attributes are supported on ZL8802 only + +currY_label "iout[12]" +currY_input Measured output current. +currY_lcrit Critical minimum output current. +currY_crit Critical maximum output current. +currY_lcrit_alarm Output current critical low alarm. +currY_crit_alarm Output current critical high alarm. + + Y is 2, 3 for ZL8802, 1 otherwise + +temp[12]_input Measured temperature. +temp[12]_min Minimum temperature. +temp[12]_max Maximum temperature. +temp[12]_lcrit Critical low temperature. +temp[12]_crit Critical high temperature. +temp[12]_min_alarm Chip temperature low alarm. +temp[12]_max_alarm Chip temperature high alarm. +temp[12]_lcrit_alarm Chip temperature critical low alarm. +temp[12]_crit_alarm Chip temperature critical high alarm. +======================= ======================================================== -- cgit v1.2.3