From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- Documentation/networking/ieee802154.rst | 182 ++++++++++++++++++++++++++++++++ 1 file changed, 182 insertions(+) create mode 100644 Documentation/networking/ieee802154.rst (limited to 'Documentation/networking/ieee802154.rst') diff --git a/Documentation/networking/ieee802154.rst b/Documentation/networking/ieee802154.rst new file mode 100644 index 0000000000..c652d383fe --- /dev/null +++ b/Documentation/networking/ieee802154.rst @@ -0,0 +1,182 @@ +=============================== +IEEE 802.15.4 Developer's Guide +=============================== + +Introduction +============ +The IEEE 802.15.4 working group focuses on standardization of the bottom +two layers: Medium Access Control (MAC) and Physical access (PHY). And there +are mainly two options available for upper layers: + +- ZigBee - proprietary protocol from the ZigBee Alliance +- 6LoWPAN - IPv6 networking over low rate personal area networks + +The goal of the Linux-wpan is to provide a complete implementation +of the IEEE 802.15.4 and 6LoWPAN protocols. IEEE 802.15.4 is a stack +of protocols for organizing Low-Rate Wireless Personal Area Networks. + +The stack is composed of three main parts: + +- IEEE 802.15.4 layer; We have chosen to use plain Berkeley socket API, + the generic Linux networking stack to transfer IEEE 802.15.4 data + messages and a special protocol over netlink for configuration/management +- MAC - provides access to shared channel and reliable data delivery +- PHY - represents device drivers + +Socket API +========== + +:: + + int sd = socket(PF_IEEE802154, SOCK_DGRAM, 0); + +The address family, socket addresses etc. are defined in the +include/net/af_ieee802154.h header or in the special header +in the userspace package (see either https://linux-wpan.org/wpan-tools.html +or the git tree at https://github.com/linux-wpan/wpan-tools). + +6LoWPAN Linux implementation +============================ + +The IEEE 802.15.4 standard specifies an MTU of 127 bytes, yielding about 80 +octets of actual MAC payload once security is turned on, on a wireless link +with a link throughput of 250 kbps or less. The 6LoWPAN adaptation format +[RFC4944] was specified to carry IPv6 datagrams over such constrained links, +taking into account limited bandwidth, memory, or energy resources that are +expected in applications such as wireless Sensor Networks. [RFC4944] defines +a Mesh Addressing header to support sub-IP forwarding, a Fragmentation header +to support the IPv6 minimum MTU requirement [RFC2460], and stateless header +compression for IPv6 datagrams (LOWPAN_HC1 and LOWPAN_HC2) to reduce the +relatively large IPv6 and UDP headers down to (in the best case) several bytes. + +In September 2011 the standard update was published - [RFC6282]. +It deprecates HC1 and HC2 compression and defines IPHC encoding format which is +used in this Linux implementation. + +All the code related to 6lowpan you may find in files: net/6lowpan/* +and net/ieee802154/6lowpan/* + +To setup a 6LoWPAN interface you need: +1. Add IEEE802.15.4 interface and set channel and PAN ID; +2. Add 6lowpan interface by command like: +# ip link add link wpan0 name lowpan0 type lowpan +3. Bring up 'lowpan0' interface + +Drivers +======= + +Like with WiFi, there are several types of devices implementing IEEE 802.15.4. +1) 'HardMAC'. The MAC layer is implemented in the device itself, the device +exports a management (e.g. MLME) and data API. +2) 'SoftMAC' or just radio. These types of devices are just radio transceivers +possibly with some kinds of acceleration like automatic CRC computation and +comparison, automagic ACK handling, address matching, etc. + +Those types of devices require different approach to be hooked into Linux kernel. + +HardMAC +------- + +See the header include/net/ieee802154_netdev.h. You have to implement Linux +net_device, with .type = ARPHRD_IEEE802154. Data is exchanged with socket family +code via plain sk_buffs. On skb reception skb->cb must contain additional +info as described in the struct ieee802154_mac_cb. During packet transmission +the skb->cb is used to provide additional data to device's header_ops->create +function. Be aware that this data can be overridden later (when socket code +submits skb to qdisc), so if you need something from that cb later, you should +store info in the skb->data on your own. + +To hook the MLME interface you have to populate the ml_priv field of your +net_device with a pointer to struct ieee802154_mlme_ops instance. The fields +assoc_req, assoc_resp, disassoc_req, start_req, and scan_req are optional. +All other fields are required. + +SoftMAC +------- + +The MAC is the middle layer in the IEEE 802.15.4 Linux stack. This moment it +provides interface for drivers registration and management of slave interfaces. + +NOTE: Currently the only monitor device type is supported - it's IEEE 802.15.4 +stack interface for network sniffers (e.g. WireShark). + +This layer is going to be extended soon. + +See header include/net/mac802154.h and several drivers in +drivers/net/ieee802154/. + +Fake drivers +------------ + +In addition there is a driver available which simulates a real device with +SoftMAC (fakelb - IEEE 802.15.4 loopback driver) interface. This option +provides a possibility to test and debug the stack without usage of real hardware. + +Device drivers API +================== + +The include/net/mac802154.h defines following functions: + +.. c:function:: struct ieee802154_dev *ieee802154_alloc_device (size_t priv_size, struct ieee802154_ops *ops) + +Allocation of IEEE 802.15.4 compatible device. + +.. c:function:: void ieee802154_free_device(struct ieee802154_dev *dev) + +Freeing allocated device. + +.. c:function:: int ieee802154_register_device(struct ieee802154_dev *dev) + +Register PHY in the system. + +.. c:function:: void ieee802154_unregister_device(struct ieee802154_dev *dev) + +Freeing registered PHY. + +.. c:function:: void ieee802154_rx_irqsafe(struct ieee802154_hw *hw, struct sk_buff *skb, u8 lqi) + +Telling 802.15.4 module there is a new received frame in the skb with +the RF Link Quality Indicator (LQI) from the hardware device. + +.. c:function:: void ieee802154_xmit_complete(struct ieee802154_hw *hw, struct sk_buff *skb, bool ifs_handling) + +Telling 802.15.4 module the frame in the skb is or going to be +transmitted through the hardware device + +The device driver must implement the following callbacks in the IEEE 802.15.4 +operations structure at least:: + + struct ieee802154_ops { + ... + int (*start)(struct ieee802154_hw *hw); + void (*stop)(struct ieee802154_hw *hw); + ... + int (*xmit_async)(struct ieee802154_hw *hw, struct sk_buff *skb); + int (*ed)(struct ieee802154_hw *hw, u8 *level); + int (*set_channel)(struct ieee802154_hw *hw, u8 page, u8 channel); + ... + }; + +.. c:function:: int start(struct ieee802154_hw *hw) + +Handler that 802.15.4 module calls for the hardware device initialization. + +.. c:function:: void stop(struct ieee802154_hw *hw) + +Handler that 802.15.4 module calls for the hardware device cleanup. + +.. c:function:: int xmit_async(struct ieee802154_hw *hw, struct sk_buff *skb) + +Handler that 802.15.4 module calls for each frame in the skb going to be +transmitted through the hardware device. + +.. c:function:: int ed(struct ieee802154_hw *hw, u8 *level) + +Handler that 802.15.4 module calls for Energy Detection from the hardware +device. + +.. c:function:: int set_channel(struct ieee802154_hw *hw, u8 page, u8 channel) + +Set radio for listening on specific channel of the hardware device. + +Moreover IEEE 802.15.4 device operations structure should be filled. -- cgit v1.2.3