From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- Documentation/process/maintainer-netdev.rst | 454 ++++++++++++++++++++++++++++ 1 file changed, 454 insertions(+) create mode 100644 Documentation/process/maintainer-netdev.rst (limited to 'Documentation/process/maintainer-netdev.rst') diff --git a/Documentation/process/maintainer-netdev.rst b/Documentation/process/maintainer-netdev.rst new file mode 100644 index 000000000..09dcf6377 --- /dev/null +++ b/Documentation/process/maintainer-netdev.rst @@ -0,0 +1,454 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _netdev-FAQ: + +============================= +Networking subsystem (netdev) +============================= + +tl;dr +----- + + - designate your patch to a tree - ``[PATCH net]`` or ``[PATCH net-next]`` + - for fixes the ``Fixes:`` tag is required, regardless of the tree + - don't post large series (> 15 patches), break them up + - don't repost your patches within one 24h period + - reverse xmas tree + +netdev +------ + +netdev is a mailing list for all network-related Linux stuff. This +includes anything found under net/ (i.e. core code like IPv6) and +drivers/net (i.e. hardware specific drivers) in the Linux source tree. + +Note that some subsystems (e.g. wireless drivers) which have a high +volume of traffic have their own specific mailing lists and trees. + +The netdev list is managed (like many other Linux mailing lists) through +VGER (http://vger.kernel.org/) with archives available at +https://lore.kernel.org/netdev/ + +Aside from subsystems like those mentioned above, all network-related +Linux development (i.e. RFC, review, comments, etc.) takes place on +netdev. + +Development cycle +----------------- + +Here is a bit of background information on +the cadence of Linux development. Each new release starts off with a +two week "merge window" where the main maintainers feed their new stuff +to Linus for merging into the mainline tree. After the two weeks, the +merge window is closed, and it is called/tagged ``-rc1``. No new +features get mainlined after this -- only fixes to the rc1 content are +expected. After roughly a week of collecting fixes to the rc1 content, +rc2 is released. This repeats on a roughly weekly basis until rc7 +(typically; sometimes rc6 if things are quiet, or rc8 if things are in a +state of churn), and a week after the last vX.Y-rcN was done, the +official vX.Y is released. + +To find out where we are now in the cycle - load the mainline (Linus) +page here: + + https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git + +and note the top of the "tags" section. If it is rc1, it is early in +the dev cycle. If it was tagged rc7 a week ago, then a release is +probably imminent. If the most recent tag is a final release tag +(without an ``-rcN`` suffix) - we are most likely in a merge window +and ``net-next`` is closed. + +git trees and patch flow +------------------------ + +There are two networking trees (git repositories) in play. Both are +driven by David Miller, the main network maintainer. There is the +``net`` tree, and the ``net-next`` tree. As you can probably guess from +the names, the ``net`` tree is for fixes to existing code already in the +mainline tree from Linus, and ``net-next`` is where the new code goes +for the future release. You can find the trees here: + +- https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git +- https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git + +Relating that to kernel development: At the beginning of the 2-week +merge window, the ``net-next`` tree will be closed - no new changes/features. +The accumulated new content of the past ~10 weeks will be passed onto +mainline/Linus via a pull request for vX.Y -- at the same time, the +``net`` tree will start accumulating fixes for this pulled content +relating to vX.Y + +An announcement indicating when ``net-next`` has been closed is usually +sent to netdev, but knowing the above, you can predict that in advance. + +.. warning:: + Do not send new ``net-next`` content to netdev during the + period during which ``net-next`` tree is closed. + +RFC patches sent for review only are obviously welcome at any time +(use ``--subject-prefix='RFC net-next'`` with ``git format-patch``). + +Shortly after the two weeks have passed (and vX.Y-rc1 is released), the +tree for ``net-next`` reopens to collect content for the next (vX.Y+1) +release. + +If you aren't subscribed to netdev and/or are simply unsure if +``net-next`` has re-opened yet, simply check the ``net-next`` git +repository link above for any new networking-related commits. You may +also check the following website for the current status: + + https://netdev.bots.linux.dev/net-next.html + +The ``net`` tree continues to collect fixes for the vX.Y content, and is +fed back to Linus at regular (~weekly) intervals. Meaning that the +focus for ``net`` is on stabilization and bug fixes. + +Finally, the vX.Y gets released, and the whole cycle starts over. + +netdev patch review +------------------- + +.. _patch_status: + +Patch status +~~~~~~~~~~~~ + +Status of a patch can be checked by looking at the main patchwork +queue for netdev: + + https://patchwork.kernel.org/project/netdevbpf/list/ + +The "State" field will tell you exactly where things are at with your +patch: + +================== ============================================================= +Patch state Description +================== ============================================================= +New, Under review pending review, patch is in the maintainer’s queue for + review; the two states are used interchangeably (depending on + the exact co-maintainer handling patchwork at the time) +Accepted patch was applied to the appropriate networking tree, this is + usually set automatically by the pw-bot +Needs ACK waiting for an ack from an area expert or testing +Changes requested patch has not passed the review, new revision is expected + with appropriate code and commit message changes +Rejected patch has been rejected and new revision is not expected +Not applicable patch is expected to be applied outside of the networking + subsystem +Awaiting upstream patch should be reviewed and handled by appropriate + sub-maintainer, who will send it on to the networking trees; + patches set to ``Awaiting upstream`` in netdev's patchwork + will usually remain in this state, whether the sub-maintainer + requested changes, accepted or rejected the patch +Deferred patch needs to be reposted later, usually due to dependency + or because it was posted for a closed tree +Superseded new version of the patch was posted, usually set by the + pw-bot +RFC not to be applied, usually not in maintainer’s review queue, + pw-bot can automatically set patches to this state based + on subject tags +================== ============================================================= + +Patches are indexed by the ``Message-ID`` header of the emails +which carried them so if you have trouble finding your patch append +the value of ``Message-ID`` to the URL above. + +Updating patch status +~~~~~~~~~~~~~~~~~~~~~ + +Contributors and reviewers do not have the permissions to update patch +state directly in patchwork. Patchwork doesn't expose much information +about the history of the state of patches, therefore having multiple +people update the state leads to confusion. + +Instead of delegating patchwork permissions netdev uses a simple mail +bot which looks for special commands/lines within the emails sent to +the mailing list. For example to mark a series as Changes Requested +one needs to send the following line anywhere in the email thread:: + + pw-bot: changes-requested + +As a result the bot will set the entire series to Changes Requested. +This may be useful when author discovers a bug in their own series +and wants to prevent it from getting applied. + +The use of the bot is entirely optional, if in doubt ignore its existence +completely. Maintainers will classify and update the state of the patches +themselves. No email should ever be sent to the list with the main purpose +of communicating with the bot, the bot commands should be seen as metadata. + +The use of the bot is restricted to authors of the patches (the ``From:`` +header on patch submission and command must match!), maintainers of +the modified code according to the MAINTAINERS file (again, ``From:`` +must match the MAINTAINERS entry) and a handful of senior reviewers. + +Bot records its activity here: + + https://netdev.bots.linux.dev/pw-bot.html + +Review timelines +~~~~~~~~~~~~~~~~ + +Generally speaking, the patches get triaged quickly (in less than +48h). But be patient, if your patch is active in patchwork (i.e. it's +listed on the project's patch list) the chances it was missed are close to zero. +Asking the maintainer for status updates on your +patch is a good way to ensure your patch is ignored or pushed to the +bottom of the priority list. + +.. _Changes requested: + +Changes requested +~~~~~~~~~~~~~~~~~ + +Patches :ref:`marked` as ``Changes Requested`` need +to be revised. The new version should come with a change log, +preferably including links to previous postings, for example:: + + [PATCH net-next v3] net: make cows go moo + + Even users who don't drink milk appreciate hearing the cows go "moo". + + The amount of mooing will depend on packet rate so should match + the diurnal cycle quite well. + + Signed-of-by: Joe Defarmer + --- + v3: + - add a note about time-of-day mooing fluctuation to the commit message + v2: https://lore.kernel.org/netdev/123themessageid@barn.org/ + - fix missing argument in kernel doc for netif_is_bovine() + - fix memory leak in netdev_register_cow() + v1: https://lore.kernel.org/netdev/456getstheclicks@barn.org/ + +The commit message should be revised to answer any questions reviewers +had to ask in previous discussions. Occasionally the update of +the commit message will be the only change in the new version. + +Partial resends +~~~~~~~~~~~~~~~ + +Please always resend the entire patch series and make sure you do number your +patches such that it is clear this is the latest and greatest set of patches +that can be applied. Do not try to resend just the patches which changed. + +Handling misapplied patches +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Occasionally a patch series gets applied before receiving critical feedback, +or the wrong version of a series gets applied. + +Making the patch disappear once it is pushed out is not possible, the commit +history in netdev trees is immutable. +Please send incremental versions on top of what has been merged in order to fix +the patches the way they would look like if your latest patch series was to be +merged. + +In cases where full revert is needed the revert has to be submitted +as a patch to the list with a commit message explaining the technical +problems with the reverted commit. Reverts should be used as a last resort, +when original change is completely wrong; incremental fixes are preferred. + +Stable tree +~~~~~~~~~~~ + +While it used to be the case that netdev submissions were not supposed +to carry explicit ``CC: stable@vger.kernel.org`` tags that is no longer +the case today. Please follow the standard stable rules in +:ref:`Documentation/process/stable-kernel-rules.rst `, +and make sure you include appropriate Fixes tags! + +Security fixes +~~~~~~~~~~~~~~ + +Do not email netdev maintainers directly if you think you discovered +a bug that might have possible security implications. +The current netdev maintainer has consistently requested that +people use the mailing lists and not reach out directly. If you aren't +OK with that, then perhaps consider mailing security@kernel.org or +reading about http://oss-security.openwall.org/wiki/mailing-lists/distros +as possible alternative mechanisms. + + +Co-posting changes to user space components +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +User space code exercising kernel features should be posted +alongside kernel patches. This gives reviewers a chance to see +how any new interface is used and how well it works. + +When user space tools reside in the kernel repo itself all changes +should generally come as one series. If series becomes too large +or the user space project is not reviewed on netdev include a link +to a public repo where user space patches can be seen. + +In case user space tooling lives in a separate repository but is +reviewed on netdev (e.g. patches to ``iproute2`` tools) kernel and +user space patches should form separate series (threads) when posted +to the mailing list, e.g.:: + + [PATCH net-next 0/3] net: some feature cover letter + └─ [PATCH net-next 1/3] net: some feature prep + └─ [PATCH net-next 2/3] net: some feature do it + └─ [PATCH net-next 3/3] selftest: net: some feature + + [PATCH iproute2-next] ip: add support for some feature + +Posting as one thread is discouraged because it confuses patchwork +(as of patchwork 2.2.2). + +Preparing changes +----------------- + +Attention to detail is important. Re-read your own work as if you were the +reviewer. You can start with using ``checkpatch.pl``, perhaps even with +the ``--strict`` flag. But do not be mindlessly robotic in doing so. +If your change is a bug fix, make sure your commit log indicates the +end-user visible symptom, the underlying reason as to why it happens, +and then if necessary, explain why the fix proposed is the best way to +get things done. Don't mangle whitespace, and as is common, don't +mis-indent function arguments that span multiple lines. If it is your +first patch, mail it to yourself so you can test apply it to an +unpatched tree to confirm infrastructure didn't mangle it. + +Finally, go back and read +:ref:`Documentation/process/submitting-patches.rst ` +to be sure you are not repeating some common mistake documented there. + +Indicating target tree +~~~~~~~~~~~~~~~~~~~~~~ + +To help maintainers and CI bots you should explicitly mark which tree +your patch is targeting. Assuming that you use git, use the prefix +flag:: + + git format-patch --subject-prefix='PATCH net-next' start..finish + +Use ``net`` instead of ``net-next`` (always lower case) in the above for +bug-fix ``net`` content. + +Dividing work into patches +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Put yourself in the shoes of the reviewer. Each patch is read separately +and therefore should constitute a comprehensible step towards your stated +goal. + +Avoid sending series longer than 15 patches. Larger series takes longer +to review as reviewers will defer looking at it until they find a large +chunk of time. A small series can be reviewed in a short time, so Maintainers +just do it. As a result, a sequence of smaller series gets merged quicker and +with better review coverage. Re-posting large series also increases the mailing +list traffic. + +Multi-line comments +~~~~~~~~~~~~~~~~~~~ + +Comment style convention is slightly different for networking and most of +the tree. Instead of this:: + + /* + * foobar blah blah blah + * another line of text + */ + +it is requested that you make it look like this:: + + /* foobar blah blah blah + * another line of text + */ + +Local variable ordering ("reverse xmas tree", "RCS") +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Netdev has a convention for ordering local variables in functions. +Order the variable declaration lines longest to shortest, e.g.:: + + struct scatterlist *sg; + struct sk_buff *skb; + int err, i; + +If there are dependencies between the variables preventing the ordering +move the initialization out of line. + +Format precedence +~~~~~~~~~~~~~~~~~ + +When working in existing code which uses nonstandard formatting make +your code follow the most recent guidelines, so that eventually all code +in the domain of netdev is in the preferred format. + +Resending after review +~~~~~~~~~~~~~~~~~~~~~~ + +Allow at least 24 hours to pass between postings. This will ensure reviewers +from all geographical locations have a chance to chime in. Do not wait +too long (weeks) between postings either as it will make it harder for reviewers +to recall all the context. + +Make sure you address all the feedback in your new posting. Do not post a new +version of the code if the discussion about the previous version is still +ongoing, unless directly instructed by a reviewer. + +The new version of patches should be posted as a separate thread, +not as a reply to the previous posting. Change log should include a link +to the previous posting (see :ref:`Changes requested`). + +Testing +------- + +Expected level of testing +~~~~~~~~~~~~~~~~~~~~~~~~~ + +At the very minimum your changes must survive an ``allyesconfig`` and an +``allmodconfig`` build with ``W=1`` set without new warnings or failures. + +Ideally you will have done run-time testing specific to your change, +and the patch series contains a set of kernel selftest for +``tools/testing/selftests/net`` or using the KUnit framework. + +You are expected to test your changes on top of the relevant networking +tree (``net`` or ``net-next``) and not e.g. a stable tree or ``linux-next``. + +patchwork checks +~~~~~~~~~~~~~~~~ + +Checks in patchwork are mostly simple wrappers around existing kernel +scripts, the sources are available at: + +https://github.com/kuba-moo/nipa/tree/master/tests + +**Do not** post your patches just to run them through the checks. +You must ensure that your patches are ready by testing them locally +before posting to the mailing list. The patchwork build bot instance +gets overloaded very easily and netdev@vger really doesn't need more +traffic if we can help it. + +netdevsim +~~~~~~~~~ + +``netdevsim`` is a test driver which can be used to exercise driver +configuration APIs without requiring capable hardware. +Mock-ups and tests based on ``netdevsim`` are strongly encouraged when +adding new APIs, but ``netdevsim`` in itself is **not** considered +a use case/user. You must also implement the new APIs in a real driver. + +We give no guarantees that ``netdevsim`` won't change in the future +in a way which would break what would normally be considered uAPI. + +``netdevsim`` is reserved for use by upstream tests only, so any +new ``netdevsim`` features must be accompanied by selftests under +``tools/testing/selftests/``. + +Testimonials / feedback +----------------------- + +Some companies use peer feedback in employee performance reviews. +Please feel free to request feedback from netdev maintainers, +especially if you spend significant amount of time reviewing code +and go out of your way to improve shared infrastructure. + +The feedback must be requested by you, the contributor, and will always +be shared with you (even if you request for it to be submitted to your +manager). -- cgit v1.2.3