From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- Documentation/sound/cards/maya44.rst | 186 +++++++++++++++++++++++++++++++++++ 1 file changed, 186 insertions(+) create mode 100644 Documentation/sound/cards/maya44.rst (limited to 'Documentation/sound/cards/maya44.rst') diff --git a/Documentation/sound/cards/maya44.rst b/Documentation/sound/cards/maya44.rst new file mode 100644 index 0000000000..ab973f66c9 --- /dev/null +++ b/Documentation/sound/cards/maya44.rst @@ -0,0 +1,186 @@ +================================= +Notes on Maya44 USB Audio Support +================================= + +.. note:: + The following is the original document of Rainer's patch that the + current maya44 code based on. Some contents might be obsoleted, but I + keep here as reference -- tiwai + +Feb 14, 2008 + +Rainer Zimmermann + +STATE OF DEVELOPMENT +==================== + +This driver is being developed on the initiative of Piotr Makowski (oponek@gmail.com) and financed by Lars Bergmann. +Development is carried out by Rainer Zimmermann (mail@lightshed.de). + +ESI provided a sample Maya44 card for the development work. + +However, unfortunately it has turned out difficult to get detailed programming information, so I (Rainer Zimmermann) had to find out some card-specific information by experiment and conjecture. Some information (in particular, several GPIO bits) is still missing. + +This is the first testing version of the Maya44 driver released to the alsa-devel mailing list (Feb 5, 2008). + + +The following functions work, as tested by Rainer Zimmermann and Piotr Makowski: + +- playback and capture at all sampling rates +- input/output level +- crossmixing +- line/mic switch +- phantom power switch +- analogue monitor a.k.a bypass + + +The following functions *should* work, but are not fully tested: + +- Channel 3+4 analogue - S/PDIF input switching +- S/PDIF output +- all inputs/outputs on the M/IO/DIO extension card +- internal/external clock selection + + +*In particular, we would appreciate testing of these functions by anyone who has access to an M/IO/DIO extension card.* + + +Things that do not seem to work: + +- The level meters ("multi track") in 'alsamixer' do not seem to react to signals in (if this is a bug, it would probably be in the existing ICE1724 code). + +- Ardour 2.1 seems to work only via JACK, not using ALSA directly or via OSS. This still needs to be tracked down. + + +DRIVER DETAILS +============== + +the following files were added: + +* pci/ice1724/maya44.c - Maya44 specific code +* pci/ice1724/maya44.h +* pci/ice1724/ice1724.patch +* pci/ice1724/ice1724.h.patch - PROPOSED patch to ice1724.h (see SAMPLING RATES) +* i2c/other/wm8776.c - low-level access routines for Wolfson WM8776 codecs +* include/wm8776.h + + +Note that the wm8776.c code is meant to be card-independent and does not actually register the codec with the ALSA infrastructure. +This is done in maya44.c, mainly because some of the WM8776 controls are used in Maya44-specific ways, and should be named appropriately. + + +the following files were created in pci/ice1724, simply #including the corresponding file from the alsa-kernel tree: + +* wtm.h +* vt1720_mobo.h +* revo.h +* prodigy192.h +* pontis.h +* phase.h +* maya44.h +* juli.h +* aureon.h +* amp.h +* envy24ht.h +* se.h +* prodigy_hifi.h + + +*I hope this is the correct way to do things.* + + +SAMPLING RATES +============== + +The Maya44 card (or more exactly, the Wolfson WM8776 codecs) allow a maximum sampling rate of 192 kHz for playback and 92 kHz for capture. + +As the ICE1724 chip only allows one global sampling rate, this is handled as follows: + +* setting the sampling rate on any open PCM device on the maya44 card will always set the *global* sampling rate for all playback and capture channels. + +* In the current state of the driver, setting rates of up to 192 kHz is permitted even for capture devices. + +*AVOID CAPTURING AT RATES ABOVE 96kHz*, even though it may appear to work. The codec cannot actually capture at such rates, meaning poor quality. + + +I propose some additional code for limiting the sampling rate when setting on a capture pcm device. However because of the global sampling rate, this logic would be somewhat problematic. + +The proposed code (currently deactivated) is in ice1712.h.patch, ice1724.c and maya44.c (in pci/ice1712). + + +SOUND DEVICES +============= + +PCM devices correspond to inputs/outputs as follows (assuming Maya44 is card #0): + +* hw:0,0 input - stereo, analog input 1+2 +* hw:0,0 output - stereo, analog output 1+2 +* hw:0,1 input - stereo, analog input 3+4 OR S/PDIF input +* hw:0,1 output - stereo, analog output 3+4 (and SPDIF out) + + +NAMING OF MIXER CONTROLS +======================== + +(for more information about the signal flow, please refer to the block diagram on p.24 of the ESI Maya44 manual, or in the ESI windows software). + + +PCM + (digital) output level for channel 1+2 +PCM 1 + same for channel 3+4 + +Mic Phantom+48V + switch for +48V phantom power for electrostatic microphones on input 1/2. + + Make sure this is not turned on while any other source is connected to input 1/2. + It might damage the source and/or the maya44 card. + +Mic/Line input + if switch is on, input jack 1/2 is microphone input (mono), otherwise line input (stereo). + +Bypass + analogue bypass from ADC input to output for channel 1+2. Same as "Monitor" in the windows driver. +Bypass 1 + same for channel 3+4. + +Crossmix + cross-mixer from channels 1+2 to channels 3+4 +Crossmix 1 + cross-mixer from channels 3+4 to channels 1+2 + +IEC958 Output + switch for S/PDIF output. + + This is not supported by the ESI windows driver. + S/PDIF should output the same signal as channel 3+4. [untested!] + + +Digital output selectors + These switches allow a direct digital routing from the ADCs to the DACs. + Each switch determines where the digital input data to one of the DACs comes from. + They are not supported by the ESI windows driver. + For normal operation, they should all be set to "PCM out". + +H/W + Output source channel 1 +H/W 1 + Output source channel 2 +H/W 2 + Output source channel 3 +H/W 3 + Output source channel 4 + +H/W 4 ... H/W 9 + unknown function, left in to enable testing. + + Possibly some of these control S/PDIF output(s). + If these turn out to be unused, they will go away in later driver versions. + +Selectable values for each of the digital output selectors are: + +PCM out + DAC output of the corresponding channel (default setting) +Input 1 ... Input 4 + direct routing from ADC output of the selected input channel + -- cgit v1.2.3