From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- Documentation/trace/histogram.rst | 3071 +++++++++++++++++++++++++++++++++++++ 1 file changed, 3071 insertions(+) create mode 100644 Documentation/trace/histogram.rst (limited to 'Documentation/trace/histogram.rst') diff --git a/Documentation/trace/histogram.rst b/Documentation/trace/histogram.rst new file mode 100644 index 0000000000..3c9b263de9 --- /dev/null +++ b/Documentation/trace/histogram.rst @@ -0,0 +1,3071 @@ +================ +Event Histograms +================ + +Documentation written by Tom Zanussi + +1. Introduction +=============== + + Histogram triggers are special event triggers that can be used to + aggregate trace event data into histograms. For information on + trace events and event triggers, see Documentation/trace/events.rst. + + +2. Histogram Trigger Command +============================ + + A histogram trigger command is an event trigger command that + aggregates event hits into a hash table keyed on one or more trace + event format fields (or stacktrace) and a set of running totals + derived from one or more trace event format fields and/or event + counts (hitcount). + + The format of a hist trigger is as follows:: + + hist:keys=[:values=] + [:sort=][:size=#entries][:pause][:continue] + [:clear][:name=histname1][:nohitcount][:.] [if ] + + When a matching event is hit, an entry is added to a hash table + using the key(s) and value(s) named. Keys and values correspond to + fields in the event's format description. Values must correspond to + numeric fields - on an event hit, the value(s) will be added to a + sum kept for that field. The special string 'hitcount' can be used + in place of an explicit value field - this is simply a count of + event hits. If 'values' isn't specified, an implicit 'hitcount' + value will be automatically created and used as the only value. + Keys can be any field, or the special string 'common_stacktrace', which + will use the event's kernel stacktrace as the key. The keywords + 'keys' or 'key' can be used to specify keys, and the keywords + 'values', 'vals', or 'val' can be used to specify values. Compound + keys consisting of up to three fields can be specified by the 'keys' + keyword. Hashing a compound key produces a unique entry in the + table for each unique combination of component keys, and can be + useful for providing more fine-grained summaries of event data. + Additionally, sort keys consisting of up to two fields can be + specified by the 'sort' keyword. If more than one field is + specified, the result will be a 'sort within a sort': the first key + is taken to be the primary sort key and the second the secondary + key. If a hist trigger is given a name using the 'name' parameter, + its histogram data will be shared with other triggers of the same + name, and trigger hits will update this common data. Only triggers + with 'compatible' fields can be combined in this way; triggers are + 'compatible' if the fields named in the trigger share the same + number and type of fields and those fields also have the same names. + Note that any two events always share the compatible 'hitcount' and + 'common_stacktrace' fields and can therefore be combined using those + fields, however pointless that may be. + + 'hist' triggers add a 'hist' file to each event's subdirectory. + Reading the 'hist' file for the event will dump the hash table in + its entirety to stdout. If there are multiple hist triggers + attached to an event, there will be a table for each trigger in the + output. The table displayed for a named trigger will be the same as + any other instance having the same name. Each printed hash table + entry is a simple list of the keys and values comprising the entry; + keys are printed first and are delineated by curly braces, and are + followed by the set of value fields for the entry. By default, + numeric fields are displayed as base-10 integers. This can be + modified by appending any of the following modifiers to the field + name: + + ============= ================================================= + .hex display a number as a hex value + .sym display an address as a symbol + .sym-offset display an address as a symbol and offset + .syscall display a syscall id as a system call name + .execname display a common_pid as a program name + .log2 display log2 value rather than raw number + .buckets=size display grouping of values rather than raw number + .usecs display a common_timestamp in microseconds + .percent display a number of percentage value + .graph display a bar-graph of a value + .stacktrace display as a stacktrace (must by a long[] type) + ============= ================================================= + + Note that in general the semantics of a given field aren't + interpreted when applying a modifier to it, but there are some + restrictions to be aware of in this regard: + + - only the 'hex' modifier can be used for values (because values + are essentially sums, and the other modifiers don't make sense + in that context). + - the 'execname' modifier can only be used on a 'common_pid'. The + reason for this is that the execname is simply the 'comm' value + saved for the 'current' process when an event was triggered, + which is the same as the common_pid value saved by the event + tracing code. Trying to apply that comm value to other pid + values wouldn't be correct, and typically events that care save + pid-specific comm fields in the event itself. + + A typical usage scenario would be the following to enable a hist + trigger, read its current contents, and then turn it off:: + + # echo 'hist:keys=skbaddr.hex:vals=len' > \ + /sys/kernel/tracing/events/net/netif_rx/trigger + + # cat /sys/kernel/tracing/events/net/netif_rx/hist + + # echo '!hist:keys=skbaddr.hex:vals=len' > \ + /sys/kernel/tracing/events/net/netif_rx/trigger + + The trigger file itself can be read to show the details of the + currently attached hist trigger. This information is also displayed + at the top of the 'hist' file when read. + + By default, the size of the hash table is 2048 entries. The 'size' + parameter can be used to specify more or fewer than that. The units + are in terms of hashtable entries - if a run uses more entries than + specified, the results will show the number of 'drops', the number + of hits that were ignored. The size should be a power of 2 between + 128 and 131072 (any non- power-of-2 number specified will be rounded + up). + + The 'sort' parameter can be used to specify a value field to sort + on. The default if unspecified is 'hitcount' and the default sort + order is 'ascending'. To sort in the opposite direction, append + .descending' to the sort key. + + The 'pause' parameter can be used to pause an existing hist trigger + or to start a hist trigger but not log any events until told to do + so. 'continue' or 'cont' can be used to start or restart a paused + hist trigger. + + The 'clear' parameter will clear the contents of a running hist + trigger and leave its current paused/active state. + + Note that the 'pause', 'cont', and 'clear' parameters should be + applied using 'append' shell operator ('>>') if applied to an + existing trigger, rather than via the '>' operator, which will cause + the trigger to be removed through truncation. + + The 'nohitcount' (or NOHC) parameter will suppress display of + raw hitcount in the histogram. This option requires at least one + value field which is not a 'raw hitcount'. For example, + 'hist:...:vals=hitcount:nohitcount' is rejected, but + 'hist:...:vals=hitcount.percent:nohitcount' is OK. + +- enable_hist/disable_hist + + The enable_hist and disable_hist triggers can be used to have one + event conditionally start and stop another event's already-attached + hist trigger. Any number of enable_hist and disable_hist triggers + can be attached to a given event, allowing that event to kick off + and stop aggregations on a host of other events. + + The format is very similar to the enable/disable_event triggers:: + + enable_hist::[:count] + disable_hist::[:count] + + Instead of enabling or disabling the tracing of the target event + into the trace buffer as the enable/disable_event triggers do, the + enable/disable_hist triggers enable or disable the aggregation of + the target event into a hash table. + + A typical usage scenario for the enable_hist/disable_hist triggers + would be to first set up a paused hist trigger on some event, + followed by an enable_hist/disable_hist pair that turns the hist + aggregation on and off when conditions of interest are hit:: + + # echo 'hist:keys=skbaddr.hex:vals=len:pause' > \ + /sys/kernel/tracing/events/net/netif_receive_skb/trigger + + # echo 'enable_hist:net:netif_receive_skb if filename==/usr/bin/wget' > \ + /sys/kernel/tracing/events/sched/sched_process_exec/trigger + + # echo 'disable_hist:net:netif_receive_skb if comm==wget' > \ + /sys/kernel/tracing/events/sched/sched_process_exit/trigger + + The above sets up an initially paused hist trigger which is unpaused + and starts aggregating events when a given program is executed, and + which stops aggregating when the process exits and the hist trigger + is paused again. + + The examples below provide a more concrete illustration of the + concepts and typical usage patterns discussed above. + +'special' event fields +------------------------ + + There are a number of 'special event fields' available for use as + keys or values in a hist trigger. These look like and behave as if + they were actual event fields, but aren't really part of the event's + field definition or format file. They are however available for any + event, and can be used anywhere an actual event field could be. + They are: + + ====================== ==== ======================================= + common_timestamp u64 timestamp (from ring buffer) associated + with the event, in nanoseconds. May be + modified by .usecs to have timestamps + interpreted as microseconds. + common_cpu int the cpu on which the event occurred. + ====================== ==== ======================================= + +Extended error information +-------------------------- + + For some error conditions encountered when invoking a hist trigger + command, extended error information is available via the + tracing/error_log file. See Error Conditions in + :file:`Documentation/trace/ftrace.rst` for details. + +6.2 'hist' trigger examples +--------------------------- + + The first set of examples creates aggregations using the kmalloc + event. The fields that can be used for the hist trigger are listed + in the kmalloc event's format file:: + + # cat /sys/kernel/tracing/events/kmem/kmalloc/format + name: kmalloc + ID: 374 + format: + field:unsigned short common_type; offset:0; size:2; signed:0; + field:unsigned char common_flags; offset:2; size:1; signed:0; + field:unsigned char common_preempt_count; offset:3; size:1; signed:0; + field:int common_pid; offset:4; size:4; signed:1; + + field:unsigned long call_site; offset:8; size:8; signed:0; + field:const void * ptr; offset:16; size:8; signed:0; + field:size_t bytes_req; offset:24; size:8; signed:0; + field:size_t bytes_alloc; offset:32; size:8; signed:0; + field:gfp_t gfp_flags; offset:40; size:4; signed:0; + + We'll start by creating a hist trigger that generates a simple table + that lists the total number of bytes requested for each function in + the kernel that made one or more calls to kmalloc:: + + # echo 'hist:key=call_site:val=bytes_req.buckets=32' > \ + /sys/kernel/tracing/events/kmem/kmalloc/trigger + + This tells the tracing system to create a 'hist' trigger using the + call_site field of the kmalloc event as the key for the table, which + just means that each unique call_site address will have an entry + created for it in the table. The 'val=bytes_req' parameter tells + the hist trigger that for each unique entry (call_site) in the + table, it should keep a running total of the number of bytes + requested by that call_site. + + We'll let it run for awhile and then dump the contents of the 'hist' + file in the kmalloc event's subdirectory (for readability, a number + of entries have been omitted):: + + # cat /sys/kernel/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site:vals=bytes_req:sort=hitcount:size=2048 [active] + + { call_site: 18446744072106379007 } hitcount: 1 bytes_req: 176 + { call_site: 18446744071579557049 } hitcount: 1 bytes_req: 1024 + { call_site: 18446744071580608289 } hitcount: 1 bytes_req: 16384 + { call_site: 18446744071581827654 } hitcount: 1 bytes_req: 24 + { call_site: 18446744071580700980 } hitcount: 1 bytes_req: 8 + { call_site: 18446744071579359876 } hitcount: 1 bytes_req: 152 + { call_site: 18446744071580795365 } hitcount: 3 bytes_req: 144 + { call_site: 18446744071581303129 } hitcount: 3 bytes_req: 144 + { call_site: 18446744071580713234 } hitcount: 4 bytes_req: 2560 + { call_site: 18446744071580933750 } hitcount: 4 bytes_req: 736 + . + . + . + { call_site: 18446744072106047046 } hitcount: 69 bytes_req: 5576 + { call_site: 18446744071582116407 } hitcount: 73 bytes_req: 2336 + { call_site: 18446744072106054684 } hitcount: 136 bytes_req: 140504 + { call_site: 18446744072106224230 } hitcount: 136 bytes_req: 19584 + { call_site: 18446744072106078074 } hitcount: 153 bytes_req: 2448 + { call_site: 18446744072106062406 } hitcount: 153 bytes_req: 36720 + { call_site: 18446744071582507929 } hitcount: 153 bytes_req: 37088 + { call_site: 18446744072102520590 } hitcount: 273 bytes_req: 10920 + { call_site: 18446744071582143559 } hitcount: 358 bytes_req: 716 + { call_site: 18446744072106465852 } hitcount: 417 bytes_req: 56712 + { call_site: 18446744072102523378 } hitcount: 485 bytes_req: 27160 + { call_site: 18446744072099568646 } hitcount: 1676 bytes_req: 33520 + + Totals: + Hits: 4610 + Entries: 45 + Dropped: 0 + + The output displays a line for each entry, beginning with the key + specified in the trigger, followed by the value(s) also specified in + the trigger. At the beginning of the output is a line that displays + the trigger info, which can also be displayed by reading the + 'trigger' file:: + + # cat /sys/kernel/tracing/events/kmem/kmalloc/trigger + hist:keys=call_site:vals=bytes_req:sort=hitcount:size=2048 [active] + + At the end of the output are a few lines that display the overall + totals for the run. The 'Hits' field shows the total number of + times the event trigger was hit, the 'Entries' field shows the total + number of used entries in the hash table, and the 'Dropped' field + shows the number of hits that were dropped because the number of + used entries for the run exceeded the maximum number of entries + allowed for the table (normally 0, but if not a hint that you may + want to increase the size of the table using the 'size' parameter). + + Notice in the above output that there's an extra field, 'hitcount', + which wasn't specified in the trigger. Also notice that in the + trigger info output, there's a parameter, 'sort=hitcount', which + wasn't specified in the trigger either. The reason for that is that + every trigger implicitly keeps a count of the total number of hits + attributed to a given entry, called the 'hitcount'. That hitcount + information is explicitly displayed in the output, and in the + absence of a user-specified sort parameter, is used as the default + sort field. + + The value 'hitcount' can be used in place of an explicit value in + the 'values' parameter if you don't really need to have any + particular field summed and are mainly interested in hit + frequencies. + + To turn the hist trigger off, simply call up the trigger in the + command history and re-execute it with a '!' prepended:: + + # echo '!hist:key=call_site:val=bytes_req' > \ + /sys/kernel/tracing/events/kmem/kmalloc/trigger + + Finally, notice that the call_site as displayed in the output above + isn't really very useful. It's an address, but normally addresses + are displayed in hex. To have a numeric field displayed as a hex + value, simply append '.hex' to the field name in the trigger:: + + # echo 'hist:key=call_site.hex:val=bytes_req' > \ + /sys/kernel/tracing/events/kmem/kmalloc/trigger + + # cat /sys/kernel/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site.hex:vals=bytes_req:sort=hitcount:size=2048 [active] + + { call_site: ffffffffa026b291 } hitcount: 1 bytes_req: 433 + { call_site: ffffffffa07186ff } hitcount: 1 bytes_req: 176 + { call_site: ffffffff811ae721 } hitcount: 1 bytes_req: 16384 + { call_site: ffffffff811c5134 } hitcount: 1 bytes_req: 8 + { call_site: ffffffffa04a9ebb } hitcount: 1 bytes_req: 511 + { call_site: ffffffff8122e0a6 } hitcount: 1 bytes_req: 12 + { call_site: ffffffff8107da84 } hitcount: 1 bytes_req: 152 + { call_site: ffffffff812d8246 } hitcount: 1 bytes_req: 24 + { call_site: ffffffff811dc1e5 } hitcount: 3 bytes_req: 144 + { call_site: ffffffffa02515e8 } hitcount: 3 bytes_req: 648 + { call_site: ffffffff81258159 } hitcount: 3 bytes_req: 144 + { call_site: ffffffff811c80f4 } hitcount: 4 bytes_req: 544 + . + . + . + { call_site: ffffffffa06c7646 } hitcount: 106 bytes_req: 8024 + { call_site: ffffffffa06cb246 } hitcount: 132 bytes_req: 31680 + { call_site: ffffffffa06cef7a } hitcount: 132 bytes_req: 2112 + { call_site: ffffffff8137e399 } hitcount: 132 bytes_req: 23232 + { call_site: ffffffffa06c941c } hitcount: 185 bytes_req: 171360 + { call_site: ffffffffa06f2a66 } hitcount: 185 bytes_req: 26640 + { call_site: ffffffffa036a70e } hitcount: 265 bytes_req: 10600 + { call_site: ffffffff81325447 } hitcount: 292 bytes_req: 584 + { call_site: ffffffffa072da3c } hitcount: 446 bytes_req: 60656 + { call_site: ffffffffa036b1f2 } hitcount: 526 bytes_req: 29456 + { call_site: ffffffffa0099c06 } hitcount: 1780 bytes_req: 35600 + + Totals: + Hits: 4775 + Entries: 46 + Dropped: 0 + + Even that's only marginally more useful - while hex values do look + more like addresses, what users are typically more interested in + when looking at text addresses are the corresponding symbols + instead. To have an address displayed as symbolic value instead, + simply append '.sym' or '.sym-offset' to the field name in the + trigger:: + + # echo 'hist:key=call_site.sym:val=bytes_req' > \ + /sys/kernel/tracing/events/kmem/kmalloc/trigger + + # cat /sys/kernel/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site.sym:vals=bytes_req:sort=hitcount:size=2048 [active] + + { call_site: [ffffffff810adcb9] syslog_print_all } hitcount: 1 bytes_req: 1024 + { call_site: [ffffffff8154bc62] usb_control_msg } hitcount: 1 bytes_req: 8 + { call_site: [ffffffffa00bf6fe] hidraw_send_report [hid] } hitcount: 1 bytes_req: 7 + { call_site: [ffffffff8154acbe] usb_alloc_urb } hitcount: 1 bytes_req: 192 + { call_site: [ffffffffa00bf1ca] hidraw_report_event [hid] } hitcount: 1 bytes_req: 7 + { call_site: [ffffffff811e3a25] __seq_open_private } hitcount: 1 bytes_req: 40 + { call_site: [ffffffff8109524a] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 + { call_site: [ffffffff811febd5] fsnotify_alloc_group } hitcount: 2 bytes_req: 528 + { call_site: [ffffffff81440f58] __tty_buffer_request_room } hitcount: 2 bytes_req: 2624 + { call_site: [ffffffff81200ba6] inotify_new_group } hitcount: 2 bytes_req: 96 + { call_site: [ffffffffa05e19af] ieee80211_start_tx_ba_session [mac80211] } hitcount: 2 bytes_req: 464 + { call_site: [ffffffff81672406] tcp_get_metrics } hitcount: 2 bytes_req: 304 + { call_site: [ffffffff81097ec2] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 + { call_site: [ffffffff81089b05] sched_create_group } hitcount: 2 bytes_req: 1424 + . + . + . + { call_site: [ffffffffa04a580c] intel_crtc_page_flip [i915] } hitcount: 1185 bytes_req: 123240 + { call_site: [ffffffffa0287592] drm_mode_page_flip_ioctl [drm] } hitcount: 1185 bytes_req: 104280 + { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state [i915] } hitcount: 1402 bytes_req: 190672 + { call_site: [ffffffff812891ca] ext4_find_extent } hitcount: 1518 bytes_req: 146208 + { call_site: [ffffffffa029070e] drm_vma_node_allow [drm] } hitcount: 1746 bytes_req: 69840 + { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 2021 bytes_req: 792312 + { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc [drm] } hitcount: 2592 bytes_req: 145152 + { call_site: [ffffffffa0489a66] intel_ring_begin [i915] } hitcount: 2629 bytes_req: 378576 + { call_site: [ffffffffa046041c] i915_gem_execbuffer2 [i915] } hitcount: 2629 bytes_req: 3783248 + { call_site: [ffffffff81325607] apparmor_file_alloc_security } hitcount: 5192 bytes_req: 10384 + { call_site: [ffffffffa00b7c06] hid_report_raw_event [hid] } hitcount: 5529 bytes_req: 110584 + { call_site: [ffffffff8131ebf7] aa_alloc_task_context } hitcount: 21943 bytes_req: 702176 + { call_site: [ffffffff8125847d] ext4_htree_store_dirent } hitcount: 55759 bytes_req: 5074265 + + Totals: + Hits: 109928 + Entries: 71 + Dropped: 0 + + Because the default sort key above is 'hitcount', the above shows a + the list of call_sites by increasing hitcount, so that at the bottom + we see the functions that made the most kmalloc calls during the + run. If instead we wanted to see the top kmalloc callers in + terms of the number of bytes requested rather than the number of + calls, and we wanted the top caller to appear at the top, we can use + the 'sort' parameter, along with the 'descending' modifier:: + + # echo 'hist:key=call_site.sym:val=bytes_req:sort=bytes_req.descending' > \ + /sys/kernel/tracing/events/kmem/kmalloc/trigger + + # cat /sys/kernel/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site.sym:vals=bytes_req:sort=bytes_req.descending:size=2048 [active] + + { call_site: [ffffffffa046041c] i915_gem_execbuffer2 [i915] } hitcount: 2186 bytes_req: 3397464 + { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 1790 bytes_req: 712176 + { call_site: [ffffffff8125847d] ext4_htree_store_dirent } hitcount: 8132 bytes_req: 513135 + { call_site: [ffffffff811e2a1b] seq_buf_alloc } hitcount: 106 bytes_req: 440128 + { call_site: [ffffffffa0489a66] intel_ring_begin [i915] } hitcount: 2186 bytes_req: 314784 + { call_site: [ffffffff812891ca] ext4_find_extent } hitcount: 2174 bytes_req: 208992 + { call_site: [ffffffff811ae8e1] __kmalloc } hitcount: 8 bytes_req: 131072 + { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state [i915] } hitcount: 859 bytes_req: 116824 + { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc [drm] } hitcount: 1834 bytes_req: 102704 + { call_site: [ffffffffa04a580c] intel_crtc_page_flip [i915] } hitcount: 972 bytes_req: 101088 + { call_site: [ffffffffa0287592] drm_mode_page_flip_ioctl [drm] } hitcount: 972 bytes_req: 85536 + { call_site: [ffffffffa00b7c06] hid_report_raw_event [hid] } hitcount: 3333 bytes_req: 66664 + { call_site: [ffffffff8137e559] sg_kmalloc } hitcount: 209 bytes_req: 61632 + . + . + . + { call_site: [ffffffff81095225] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 + { call_site: [ffffffff81097ec2] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 + { call_site: [ffffffff812d8406] copy_semundo } hitcount: 2 bytes_req: 48 + { call_site: [ffffffff81200ba6] inotify_new_group } hitcount: 1 bytes_req: 48 + { call_site: [ffffffffa027121a] drm_getmagic [drm] } hitcount: 1 bytes_req: 48 + { call_site: [ffffffff811e3a25] __seq_open_private } hitcount: 1 bytes_req: 40 + { call_site: [ffffffff811c52f4] bprm_change_interp } hitcount: 2 bytes_req: 16 + { call_site: [ffffffff8154bc62] usb_control_msg } hitcount: 1 bytes_req: 8 + { call_site: [ffffffffa00bf1ca] hidraw_report_event [hid] } hitcount: 1 bytes_req: 7 + { call_site: [ffffffffa00bf6fe] hidraw_send_report [hid] } hitcount: 1 bytes_req: 7 + + Totals: + Hits: 32133 + Entries: 81 + Dropped: 0 + + To display the offset and size information in addition to the symbol + name, just use 'sym-offset' instead:: + + # echo 'hist:key=call_site.sym-offset:val=bytes_req:sort=bytes_req.descending' > \ + /sys/kernel/tracing/events/kmem/kmalloc/trigger + + # cat /sys/kernel/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site.sym-offset:vals=bytes_req:sort=bytes_req.descending:size=2048 [active] + + { call_site: [ffffffffa046041c] i915_gem_execbuffer2+0x6c/0x2c0 [i915] } hitcount: 4569 bytes_req: 3163720 + { call_site: [ffffffffa0489a66] intel_ring_begin+0xc6/0x1f0 [i915] } hitcount: 4569 bytes_req: 657936 + { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23+0x694/0x1020 [i915] } hitcount: 1519 bytes_req: 472936 + { call_site: [ffffffffa045e646] i915_gem_do_execbuffer.isra.23+0x516/0x1020 [i915] } hitcount: 3050 bytes_req: 211832 + { call_site: [ffffffff811e2a1b] seq_buf_alloc+0x1b/0x50 } hitcount: 34 bytes_req: 148384 + { call_site: [ffffffffa04a580c] intel_crtc_page_flip+0xbc/0x870 [i915] } hitcount: 1385 bytes_req: 144040 + { call_site: [ffffffff811ae8e1] __kmalloc+0x191/0x1b0 } hitcount: 8 bytes_req: 131072 + { call_site: [ffffffffa0287592] drm_mode_page_flip_ioctl+0x282/0x360 [drm] } hitcount: 1385 bytes_req: 121880 + { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc+0x32/0x100 [drm] } hitcount: 1848 bytes_req: 103488 + { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state+0x2c/0xa0 [i915] } hitcount: 461 bytes_req: 62696 + { call_site: [ffffffffa029070e] drm_vma_node_allow+0x2e/0xd0 [drm] } hitcount: 1541 bytes_req: 61640 + { call_site: [ffffffff815f8d7b] sk_prot_alloc+0xcb/0x1b0 } hitcount: 57 bytes_req: 57456 + . + . + . + { call_site: [ffffffff8109524a] alloc_fair_sched_group+0x5a/0x1a0 } hitcount: 2 bytes_req: 128 + { call_site: [ffffffffa027b921] drm_vm_open_locked+0x31/0xa0 [drm] } hitcount: 3 bytes_req: 96 + { call_site: [ffffffff8122e266] proc_self_follow_link+0x76/0xb0 } hitcount: 8 bytes_req: 96 + { call_site: [ffffffff81213e80] load_elf_binary+0x240/0x1650 } hitcount: 3 bytes_req: 84 + { call_site: [ffffffff8154bc62] usb_control_msg+0x42/0x110 } hitcount: 1 bytes_req: 8 + { call_site: [ffffffffa00bf6fe] hidraw_send_report+0x7e/0x1a0 [hid] } hitcount: 1 bytes_req: 7 + { call_site: [ffffffffa00bf1ca] hidraw_report_event+0x8a/0x120 [hid] } hitcount: 1 bytes_req: 7 + + Totals: + Hits: 26098 + Entries: 64 + Dropped: 0 + + We can also add multiple fields to the 'values' parameter. For + example, we might want to see the total number of bytes allocated + alongside bytes requested, and display the result sorted by bytes + allocated in a descending order:: + + # echo 'hist:keys=call_site.sym:values=bytes_req,bytes_alloc:sort=bytes_alloc.descending' > \ + /sys/kernel/tracing/events/kmem/kmalloc/trigger + + # cat /sys/kernel/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site.sym:vals=bytes_req,bytes_alloc:sort=bytes_alloc.descending:size=2048 [active] + + { call_site: [ffffffffa046041c] i915_gem_execbuffer2 [i915] } hitcount: 7403 bytes_req: 4084360 bytes_alloc: 5958016 + { call_site: [ffffffff811e2a1b] seq_buf_alloc } hitcount: 541 bytes_req: 2213968 bytes_alloc: 2228224 + { call_site: [ffffffffa0489a66] intel_ring_begin [i915] } hitcount: 7404 bytes_req: 1066176 bytes_alloc: 1421568 + { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 1565 bytes_req: 557368 bytes_alloc: 1037760 + { call_site: [ffffffff8125847d] ext4_htree_store_dirent } hitcount: 9557 bytes_req: 595778 bytes_alloc: 695744 + { call_site: [ffffffffa045e646] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 5839 bytes_req: 430680 bytes_alloc: 470400 + { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state [i915] } hitcount: 2388 bytes_req: 324768 bytes_alloc: 458496 + { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc [drm] } hitcount: 3911 bytes_req: 219016 bytes_alloc: 250304 + { call_site: [ffffffff815f8d7b] sk_prot_alloc } hitcount: 235 bytes_req: 236880 bytes_alloc: 240640 + { call_site: [ffffffff8137e559] sg_kmalloc } hitcount: 557 bytes_req: 169024 bytes_alloc: 221760 + { call_site: [ffffffffa00b7c06] hid_report_raw_event [hid] } hitcount: 9378 bytes_req: 187548 bytes_alloc: 206312 + { call_site: [ffffffffa04a580c] intel_crtc_page_flip [i915] } hitcount: 1519 bytes_req: 157976 bytes_alloc: 194432 + . + . + . + { call_site: [ffffffff8109bd3b] sched_autogroup_create_attach } hitcount: 2 bytes_req: 144 bytes_alloc: 192 + { call_site: [ffffffff81097ee8] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128 + { call_site: [ffffffff8109524a] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128 + { call_site: [ffffffff81095225] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128 + { call_site: [ffffffff81097ec2] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128 + { call_site: [ffffffff81213e80] load_elf_binary } hitcount: 3 bytes_req: 84 bytes_alloc: 96 + { call_site: [ffffffff81079a2e] kthread_create_on_node } hitcount: 1 bytes_req: 56 bytes_alloc: 64 + { call_site: [ffffffffa00bf6fe] hidraw_send_report [hid] } hitcount: 1 bytes_req: 7 bytes_alloc: 8 + { call_site: [ffffffff8154bc62] usb_control_msg } hitcount: 1 bytes_req: 8 bytes_alloc: 8 + { call_site: [ffffffffa00bf1ca] hidraw_report_event [hid] } hitcount: 1 bytes_req: 7 bytes_alloc: 8 + + Totals: + Hits: 66598 + Entries: 65 + Dropped: 0 + + Finally, to finish off our kmalloc example, instead of simply having + the hist trigger display symbolic call_sites, we can have the hist + trigger additionally display the complete set of kernel stack traces + that led to each call_site. To do that, we simply use the special + value 'common_stacktrace' for the key parameter:: + + # echo 'hist:keys=common_stacktrace:values=bytes_req,bytes_alloc:sort=bytes_alloc' > \ + /sys/kernel/tracing/events/kmem/kmalloc/trigger + + The above trigger will use the kernel stack trace in effect when an + event is triggered as the key for the hash table. This allows the + enumeration of every kernel callpath that led up to a particular + event, along with a running total of any of the event fields for + that event. Here we tally bytes requested and bytes allocated for + every callpath in the system that led up to a kmalloc (in this case + every callpath to a kmalloc for a kernel compile):: + + # cat /sys/kernel/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=common_stacktrace:vals=bytes_req,bytes_alloc:sort=bytes_alloc:size=2048 [active] + + { common_stacktrace: + __kmalloc_track_caller+0x10b/0x1a0 + kmemdup+0x20/0x50 + hidraw_report_event+0x8a/0x120 [hid] + hid_report_raw_event+0x3ea/0x440 [hid] + hid_input_report+0x112/0x190 [hid] + hid_irq_in+0xc2/0x260 [usbhid] + __usb_hcd_giveback_urb+0x72/0x120 + usb_giveback_urb_bh+0x9e/0xe0 + tasklet_hi_action+0xf8/0x100 + __do_softirq+0x114/0x2c0 + irq_exit+0xa5/0xb0 + do_IRQ+0x5a/0xf0 + ret_from_intr+0x0/0x30 + cpuidle_enter+0x17/0x20 + cpu_startup_entry+0x315/0x3e0 + rest_init+0x7c/0x80 + } hitcount: 3 bytes_req: 21 bytes_alloc: 24 + { common_stacktrace: + __kmalloc_track_caller+0x10b/0x1a0 + kmemdup+0x20/0x50 + hidraw_report_event+0x8a/0x120 [hid] + hid_report_raw_event+0x3ea/0x440 [hid] + hid_input_report+0x112/0x190 [hid] + hid_irq_in+0xc2/0x260 [usbhid] + __usb_hcd_giveback_urb+0x72/0x120 + usb_giveback_urb_bh+0x9e/0xe0 + tasklet_hi_action+0xf8/0x100 + __do_softirq+0x114/0x2c0 + irq_exit+0xa5/0xb0 + do_IRQ+0x5a/0xf0 + ret_from_intr+0x0/0x30 + } hitcount: 3 bytes_req: 21 bytes_alloc: 24 + { common_stacktrace: + kmem_cache_alloc_trace+0xeb/0x150 + aa_alloc_task_context+0x27/0x40 + apparmor_cred_prepare+0x1f/0x50 + security_prepare_creds+0x16/0x20 + prepare_creds+0xdf/0x1a0 + SyS_capset+0xb5/0x200 + system_call_fastpath+0x12/0x6a + } hitcount: 1 bytes_req: 32 bytes_alloc: 32 + . + . + . + { common_stacktrace: + __kmalloc+0x11b/0x1b0 + i915_gem_execbuffer2+0x6c/0x2c0 [i915] + drm_ioctl+0x349/0x670 [drm] + do_vfs_ioctl+0x2f0/0x4f0 + SyS_ioctl+0x81/0xa0 + system_call_fastpath+0x12/0x6a + } hitcount: 17726 bytes_req: 13944120 bytes_alloc: 19593808 + { common_stacktrace: + __kmalloc+0x11b/0x1b0 + load_elf_phdrs+0x76/0xa0 + load_elf_binary+0x102/0x1650 + search_binary_handler+0x97/0x1d0 + do_execveat_common.isra.34+0x551/0x6e0 + SyS_execve+0x3a/0x50 + return_from_execve+0x0/0x23 + } hitcount: 33348 bytes_req: 17152128 bytes_alloc: 20226048 + { common_stacktrace: + kmem_cache_alloc_trace+0xeb/0x150 + apparmor_file_alloc_security+0x27/0x40 + security_file_alloc+0x16/0x20 + get_empty_filp+0x93/0x1c0 + path_openat+0x31/0x5f0 + do_filp_open+0x3a/0x90 + do_sys_open+0x128/0x220 + SyS_open+0x1e/0x20 + system_call_fastpath+0x12/0x6a + } hitcount: 4766422 bytes_req: 9532844 bytes_alloc: 38131376 + { common_stacktrace: + __kmalloc+0x11b/0x1b0 + seq_buf_alloc+0x1b/0x50 + seq_read+0x2cc/0x370 + proc_reg_read+0x3d/0x80 + __vfs_read+0x28/0xe0 + vfs_read+0x86/0x140 + SyS_read+0x46/0xb0 + system_call_fastpath+0x12/0x6a + } hitcount: 19133 bytes_req: 78368768 bytes_alloc: 78368768 + + Totals: + Hits: 6085872 + Entries: 253 + Dropped: 0 + + If you key a hist trigger on common_pid, in order for example to + gather and display sorted totals for each process, you can use the + special .execname modifier to display the executable names for the + processes in the table rather than raw pids. The example below + keeps a per-process sum of total bytes read:: + + # echo 'hist:key=common_pid.execname:val=count:sort=count.descending' > \ + /sys/kernel/tracing/events/syscalls/sys_enter_read/trigger + + # cat /sys/kernel/tracing/events/syscalls/sys_enter_read/hist + # trigger info: hist:keys=common_pid.execname:vals=count:sort=count.descending:size=2048 [active] + + { common_pid: gnome-terminal [ 3196] } hitcount: 280 count: 1093512 + { common_pid: Xorg [ 1309] } hitcount: 525 count: 256640 + { common_pid: compiz [ 2889] } hitcount: 59 count: 254400 + { common_pid: bash [ 8710] } hitcount: 3 count: 66369 + { common_pid: dbus-daemon-lau [ 8703] } hitcount: 49 count: 47739 + { common_pid: irqbalance [ 1252] } hitcount: 27 count: 27648 + { common_pid: 01ifupdown [ 8705] } hitcount: 3 count: 17216 + { common_pid: dbus-daemon [ 772] } hitcount: 10 count: 12396 + { common_pid: Socket Thread [ 8342] } hitcount: 11 count: 11264 + { common_pid: nm-dhcp-client. [ 8701] } hitcount: 6 count: 7424 + { common_pid: gmain [ 1315] } hitcount: 18 count: 6336 + . + . + . + { common_pid: postgres [ 1892] } hitcount: 2 count: 32 + { common_pid: postgres [ 1891] } hitcount: 2 count: 32 + { common_pid: gmain [ 8704] } hitcount: 2 count: 32 + { common_pid: upstart-dbus-br [ 2740] } hitcount: 21 count: 21 + { common_pid: nm-dispatcher.a [ 8696] } hitcount: 1 count: 16 + { common_pid: indicator-datet [ 2904] } hitcount: 1 count: 16 + { common_pid: gdbus [ 2998] } hitcount: 1 count: 16 + { common_pid: rtkit-daemon [ 2052] } hitcount: 1 count: 8 + { common_pid: init [ 1] } hitcount: 2 count: 2 + + Totals: + Hits: 2116 + Entries: 51 + Dropped: 0 + + Similarly, if you key a hist trigger on syscall id, for example to + gather and display a list of systemwide syscall hits, you can use + the special .syscall modifier to display the syscall names rather + than raw ids. The example below keeps a running total of syscall + counts for the system during the run:: + + # echo 'hist:key=id.syscall:val=hitcount' > \ + /sys/kernel/tracing/events/raw_syscalls/sys_enter/trigger + + # cat /sys/kernel/tracing/events/raw_syscalls/sys_enter/hist + # trigger info: hist:keys=id.syscall:vals=hitcount:sort=hitcount:size=2048 [active] + + { id: sys_fsync [ 74] } hitcount: 1 + { id: sys_newuname [ 63] } hitcount: 1 + { id: sys_prctl [157] } hitcount: 1 + { id: sys_statfs [137] } hitcount: 1 + { id: sys_symlink [ 88] } hitcount: 1 + { id: sys_sendmmsg [307] } hitcount: 1 + { id: sys_semctl [ 66] } hitcount: 1 + { id: sys_readlink [ 89] } hitcount: 3 + { id: sys_bind [ 49] } hitcount: 3 + { id: sys_getsockname [ 51] } hitcount: 3 + { id: sys_unlink [ 87] } hitcount: 3 + { id: sys_rename [ 82] } hitcount: 4 + { id: unknown_syscall [ 58] } hitcount: 4 + { id: sys_connect [ 42] } hitcount: 4 + { id: sys_getpid [ 39] } hitcount: 4 + . + . + . + { id: sys_rt_sigprocmask [ 14] } hitcount: 952 + { id: sys_futex [202] } hitcount: 1534 + { id: sys_write [ 1] } hitcount: 2689 + { id: sys_setitimer [ 38] } hitcount: 2797 + { id: sys_read [ 0] } hitcount: 3202 + { id: sys_select [ 23] } hitcount: 3773 + { id: sys_writev [ 20] } hitcount: 4531 + { id: sys_poll [ 7] } hitcount: 8314 + { id: sys_recvmsg [ 47] } hitcount: 13738 + { id: sys_ioctl [ 16] } hitcount: 21843 + + Totals: + Hits: 67612 + Entries: 72 + Dropped: 0 + + The syscall counts above provide a rough overall picture of system + call activity on the system; we can see for example that the most + popular system call on this system was the 'sys_ioctl' system call. + + We can use 'compound' keys to refine that number and provide some + further insight as to which processes exactly contribute to the + overall ioctl count. + + The command below keeps a hitcount for every unique combination of + system call id and pid - the end result is essentially a table + that keeps a per-pid sum of system call hits. The results are + sorted using the system call id as the primary key, and the + hitcount sum as the secondary key:: + + # echo 'hist:key=id.syscall,common_pid.execname:val=hitcount:sort=id,hitcount' > \ + /sys/kernel/tracing/events/raw_syscalls/sys_enter/trigger + + # cat /sys/kernel/tracing/events/raw_syscalls/sys_enter/hist + # trigger info: hist:keys=id.syscall,common_pid.execname:vals=hitcount:sort=id.syscall,hitcount:size=2048 [active] + + { id: sys_read [ 0], common_pid: rtkit-daemon [ 1877] } hitcount: 1 + { id: sys_read [ 0], common_pid: gdbus [ 2976] } hitcount: 1 + { id: sys_read [ 0], common_pid: console-kit-dae [ 3400] } hitcount: 1 + { id: sys_read [ 0], common_pid: postgres [ 1865] } hitcount: 1 + { id: sys_read [ 0], common_pid: deja-dup-monito [ 3543] } hitcount: 2 + { id: sys_read [ 0], common_pid: NetworkManager [ 890] } hitcount: 2 + { id: sys_read [ 0], common_pid: evolution-calen [ 3048] } hitcount: 2 + { id: sys_read [ 0], common_pid: postgres [ 1864] } hitcount: 2 + { id: sys_read [ 0], common_pid: nm-applet [ 3022] } hitcount: 2 + { id: sys_read [ 0], common_pid: whoopsie [ 1212] } hitcount: 2 + . + . + . + { id: sys_ioctl [ 16], common_pid: bash [ 8479] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: bash [ 3472] } hitcount: 12 + { id: sys_ioctl [ 16], common_pid: gnome-terminal [ 3199] } hitcount: 16 + { id: sys_ioctl [ 16], common_pid: Xorg [ 1267] } hitcount: 1808 + { id: sys_ioctl [ 16], common_pid: compiz [ 2994] } hitcount: 5580 + . + . + . + { id: sys_waitid [247], common_pid: upstart-dbus-br [ 2690] } hitcount: 3 + { id: sys_waitid [247], common_pid: upstart-dbus-br [ 2688] } hitcount: 16 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 975] } hitcount: 2 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 3204] } hitcount: 4 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 2888] } hitcount: 4 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 3003] } hitcount: 4 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 2873] } hitcount: 4 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 3196] } hitcount: 6 + { id: sys_openat [257], common_pid: java [ 2623] } hitcount: 2 + { id: sys_eventfd2 [290], common_pid: ibus-ui-gtk3 [ 2760] } hitcount: 4 + { id: sys_eventfd2 [290], common_pid: compiz [ 2994] } hitcount: 6 + + Totals: + Hits: 31536 + Entries: 323 + Dropped: 0 + + The above list does give us a breakdown of the ioctl syscall by + pid, but it also gives us quite a bit more than that, which we + don't really care about at the moment. Since we know the syscall + id for sys_ioctl (16, displayed next to the sys_ioctl name), we + can use that to filter out all the other syscalls:: + + # echo 'hist:key=id.syscall,common_pid.execname:val=hitcount:sort=id,hitcount if id == 16' > \ + /sys/kernel/tracing/events/raw_syscalls/sys_enter/trigger + + # cat /sys/kernel/tracing/events/raw_syscalls/sys_enter/hist + # trigger info: hist:keys=id.syscall,common_pid.execname:vals=hitcount:sort=id.syscall,hitcount:size=2048 if id == 16 [active] + + { id: sys_ioctl [ 16], common_pid: gmain [ 2769] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: evolution-addre [ 8571] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: gmain [ 3003] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: gmain [ 2781] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: gmain [ 2829] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: bash [ 8726] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: bash [ 8508] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: gmain [ 2970] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: gmain [ 2768] } hitcount: 1 + . + . + . + { id: sys_ioctl [ 16], common_pid: pool [ 8559] } hitcount: 45 + { id: sys_ioctl [ 16], common_pid: pool [ 8555] } hitcount: 48 + { id: sys_ioctl [ 16], common_pid: pool [ 8551] } hitcount: 48 + { id: sys_ioctl [ 16], common_pid: avahi-daemon [ 896] } hitcount: 66 + { id: sys_ioctl [ 16], common_pid: Xorg [ 1267] } hitcount: 26674 + { id: sys_ioctl [ 16], common_pid: compiz [ 2994] } hitcount: 73443 + + Totals: + Hits: 101162 + Entries: 103 + Dropped: 0 + + The above output shows that 'compiz' and 'Xorg' are far and away + the heaviest ioctl callers (which might lead to questions about + whether they really need to be making all those calls and to + possible avenues for further investigation.) + + The compound key examples used a key and a sum value (hitcount) to + sort the output, but we can just as easily use two keys instead. + Here's an example where we use a compound key composed of the the + common_pid and size event fields. Sorting with pid as the primary + key and 'size' as the secondary key allows us to display an + ordered summary of the recvfrom sizes, with counts, received by + each process:: + + # echo 'hist:key=common_pid.execname,size:val=hitcount:sort=common_pid,size' > \ + /sys/kernel/tracing/events/syscalls/sys_enter_recvfrom/trigger + + # cat /sys/kernel/tracing/events/syscalls/sys_enter_recvfrom/hist + # trigger info: hist:keys=common_pid.execname,size:vals=hitcount:sort=common_pid.execname,size:size=2048 [active] + + { common_pid: smbd [ 784], size: 4 } hitcount: 1 + { common_pid: dnsmasq [ 1412], size: 4096 } hitcount: 672 + { common_pid: postgres [ 1796], size: 1000 } hitcount: 6 + { common_pid: postgres [ 1867], size: 1000 } hitcount: 10 + { common_pid: bamfdaemon [ 2787], size: 28 } hitcount: 2 + { common_pid: bamfdaemon [ 2787], size: 14360 } hitcount: 1 + { common_pid: compiz [ 2994], size: 8 } hitcount: 1 + { common_pid: compiz [ 2994], size: 20 } hitcount: 11 + { common_pid: gnome-terminal [ 3199], size: 4 } hitcount: 2 + { common_pid: firefox [ 8817], size: 4 } hitcount: 1 + { common_pid: firefox [ 8817], size: 8 } hitcount: 5 + { common_pid: firefox [ 8817], size: 588 } hitcount: 2 + { common_pid: firefox [ 8817], size: 628 } hitcount: 1 + { common_pid: firefox [ 8817], size: 6944 } hitcount: 1 + { common_pid: firefox [ 8817], size: 408880 } hitcount: 2 + { common_pid: firefox [ 8822], size: 8 } hitcount: 2 + { common_pid: firefox [ 8822], size: 160 } hitcount: 2 + { common_pid: firefox [ 8822], size: 320 } hitcount: 2 + { common_pid: firefox [ 8822], size: 352 } hitcount: 1 + . + . + . + { common_pid: pool [ 8923], size: 1960 } hitcount: 10 + { common_pid: pool [ 8923], size: 2048 } hitcount: 10 + { common_pid: pool [ 8924], size: 1960 } hitcount: 10 + { common_pid: pool [ 8924], size: 2048 } hitcount: 10 + { common_pid: pool [ 8928], size: 1964 } hitcount: 4 + { common_pid: pool [ 8928], size: 1965 } hitcount: 2 + { common_pid: pool [ 8928], size: 2048 } hitcount: 6 + { common_pid: pool [ 8929], size: 1982 } hitcount: 1 + { common_pid: pool [ 8929], size: 2048 } hitcount: 1 + + Totals: + Hits: 2016 + Entries: 224 + Dropped: 0 + + The above example also illustrates the fact that although a compound + key is treated as a single entity for hashing purposes, the sub-keys + it's composed of can be accessed independently. + + The next example uses a string field as the hash key and + demonstrates how you can manually pause and continue a hist trigger. + In this example, we'll aggregate fork counts and don't expect a + large number of entries in the hash table, so we'll drop it to a + much smaller number, say 256:: + + # echo 'hist:key=child_comm:val=hitcount:size=256' > \ + /sys/kernel/tracing/events/sched/sched_process_fork/trigger + + # cat /sys/kernel/tracing/events/sched/sched_process_fork/hist + # trigger info: hist:keys=child_comm:vals=hitcount:sort=hitcount:size=256 [active] + + { child_comm: dconf worker } hitcount: 1 + { child_comm: ibus-daemon } hitcount: 1 + { child_comm: whoopsie } hitcount: 1 + { child_comm: smbd } hitcount: 1 + { child_comm: gdbus } hitcount: 1 + { child_comm: kthreadd } hitcount: 1 + { child_comm: dconf worker } hitcount: 1 + { child_comm: evolution-alarm } hitcount: 2 + { child_comm: Socket Thread } hitcount: 2 + { child_comm: postgres } hitcount: 2 + { child_comm: bash } hitcount: 3 + { child_comm: compiz } hitcount: 3 + { child_comm: evolution-sourc } hitcount: 4 + { child_comm: dhclient } hitcount: 4 + { child_comm: pool } hitcount: 5 + { child_comm: nm-dispatcher.a } hitcount: 8 + { child_comm: firefox } hitcount: 8 + { child_comm: dbus-daemon } hitcount: 8 + { child_comm: glib-pacrunner } hitcount: 10 + { child_comm: evolution } hitcount: 23 + + Totals: + Hits: 89 + Entries: 20 + Dropped: 0 + + If we want to pause the hist trigger, we can simply append :pause to + the command that started the trigger. Notice that the trigger info + displays as [paused]:: + + # echo 'hist:key=child_comm:val=hitcount:size=256:pause' >> \ + /sys/kernel/tracing/events/sched/sched_process_fork/trigger + + # cat /sys/kernel/tracing/events/sched/sched_process_fork/hist + # trigger info: hist:keys=child_comm:vals=hitcount:sort=hitcount:size=256 [paused] + + { child_comm: dconf worker } hitcount: 1 + { child_comm: kthreadd } hitcount: 1 + { child_comm: dconf worker } hitcount: 1 + { child_comm: gdbus } hitcount: 1 + { child_comm: ibus-daemon } hitcount: 1 + { child_comm: Socket Thread } hitcount: 2 + { child_comm: evolution-alarm } hitcount: 2 + { child_comm: smbd } hitcount: 2 + { child_comm: bash } hitcount: 3 + { child_comm: whoopsie } hitcount: 3 + { child_comm: compiz } hitcount: 3 + { child_comm: evolution-sourc } hitcount: 4 + { child_comm: pool } hitcount: 5 + { child_comm: postgres } hitcount: 6 + { child_comm: firefox } hitcount: 8 + { child_comm: dhclient } hitcount: 10 + { child_comm: emacs } hitcount: 12 + { child_comm: dbus-daemon } hitcount: 20 + { child_comm: nm-dispatcher.a } hitcount: 20 + { child_comm: evolution } hitcount: 35 + { child_comm: glib-pacrunner } hitcount: 59 + + Totals: + Hits: 199 + Entries: 21 + Dropped: 0 + + To manually continue having the trigger aggregate events, append + :cont instead. Notice that the trigger info displays as [active] + again, and the data has changed:: + + # echo 'hist:key=child_comm:val=hitcount:size=256:cont' >> \ + /sys/kernel/tracing/events/sched/sched_process_fork/trigger + + # cat /sys/kernel/tracing/events/sched/sched_process_fork/hist + # trigger info: hist:keys=child_comm:vals=hitcount:sort=hitcount:size=256 [active] + + { child_comm: dconf worker } hitcount: 1 + { child_comm: dconf worker } hitcount: 1 + { child_comm: kthreadd } hitcount: 1 + { child_comm: gdbus } hitcount: 1 + { child_comm: ibus-daemon } hitcount: 1 + { child_comm: Socket Thread } hitcount: 2 + { child_comm: evolution-alarm } hitcount: 2 + { child_comm: smbd } hitcount: 2 + { child_comm: whoopsie } hitcount: 3 + { child_comm: compiz } hitcount: 3 + { child_comm: evolution-sourc } hitcount: 4 + { child_comm: bash } hitcount: 5 + { child_comm: pool } hitcount: 5 + { child_comm: postgres } hitcount: 6 + { child_comm: firefox } hitcount: 8 + { child_comm: dhclient } hitcount: 11 + { child_comm: emacs } hitcount: 12 + { child_comm: dbus-daemon } hitcount: 22 + { child_comm: nm-dispatcher.a } hitcount: 22 + { child_comm: evolution } hitcount: 35 + { child_comm: glib-pacrunner } hitcount: 59 + + Totals: + Hits: 206 + Entries: 21 + Dropped: 0 + + The previous example showed how to start and stop a hist trigger by + appending 'pause' and 'continue' to the hist trigger command. A + hist trigger can also be started in a paused state by initially + starting the trigger with ':pause' appended. This allows you to + start the trigger only when you're ready to start collecting data + and not before. For example, you could start the trigger in a + paused state, then unpause it and do something you want to measure, + then pause the trigger again when done. + + Of course, doing this manually can be difficult and error-prone, but + it is possible to automatically start and stop a hist trigger based + on some condition, via the enable_hist and disable_hist triggers. + + For example, suppose we wanted to take a look at the relative + weights in terms of skb length for each callpath that leads to a + netif_receive_skb event when downloading a decent-sized file using + wget. + + First we set up an initially paused stacktrace trigger on the + netif_receive_skb event:: + + # echo 'hist:key=common_stacktrace:vals=len:pause' > \ + /sys/kernel/tracing/events/net/netif_receive_skb/trigger + + Next, we set up an 'enable_hist' trigger on the sched_process_exec + event, with an 'if filename==/usr/bin/wget' filter. The effect of + this new trigger is that it will 'unpause' the hist trigger we just + set up on netif_receive_skb if and only if it sees a + sched_process_exec event with a filename of '/usr/bin/wget'. When + that happens, all netif_receive_skb events are aggregated into a + hash table keyed on stacktrace:: + + # echo 'enable_hist:net:netif_receive_skb if filename==/usr/bin/wget' > \ + /sys/kernel/tracing/events/sched/sched_process_exec/trigger + + The aggregation continues until the netif_receive_skb is paused + again, which is what the following disable_hist event does by + creating a similar setup on the sched_process_exit event, using the + filter 'comm==wget':: + + # echo 'disable_hist:net:netif_receive_skb if comm==wget' > \ + /sys/kernel/tracing/events/sched/sched_process_exit/trigger + + Whenever a process exits and the comm field of the disable_hist + trigger filter matches 'comm==wget', the netif_receive_skb hist + trigger is disabled. + + The overall effect is that netif_receive_skb events are aggregated + into the hash table for only the duration of the wget. Executing a + wget command and then listing the 'hist' file will display the + output generated by the wget command:: + + $ wget https://www.kernel.org/pub/linux/kernel/v3.x/patch-3.19.xz + + # cat /sys/kernel/tracing/events/net/netif_receive_skb/hist + # trigger info: hist:keys=common_stacktrace:vals=len:sort=hitcount:size=2048 [paused] + + { common_stacktrace: + __netif_receive_skb_core+0x46d/0x990 + __netif_receive_skb+0x18/0x60 + netif_receive_skb_internal+0x23/0x90 + napi_gro_receive+0xc8/0x100 + ieee80211_deliver_skb+0xd6/0x270 [mac80211] + ieee80211_rx_handlers+0xccf/0x22f0 [mac80211] + ieee80211_prepare_and_rx_handle+0x4e7/0xc40 [mac80211] + ieee80211_rx+0x31d/0x900 [mac80211] + iwlagn_rx_reply_rx+0x3db/0x6f0 [iwldvm] + iwl_rx_dispatch+0x8e/0xf0 [iwldvm] + iwl_pcie_irq_handler+0xe3c/0x12f0 [iwlwifi] + irq_thread_fn+0x20/0x50 + irq_thread+0x11f/0x150 + kthread+0xd2/0xf0 + ret_from_fork+0x42/0x70 + } hitcount: 85 len: 28884 + { common_stacktrace: + __netif_receive_skb_core+0x46d/0x990 + __netif_receive_skb+0x18/0x60 + netif_receive_skb_internal+0x23/0x90 + napi_gro_complete+0xa4/0xe0 + dev_gro_receive+0x23a/0x360 + napi_gro_receive+0x30/0x100 + ieee80211_deliver_skb+0xd6/0x270 [mac80211] + ieee80211_rx_handlers+0xccf/0x22f0 [mac80211] + ieee80211_prepare_and_rx_handle+0x4e7/0xc40 [mac80211] + ieee80211_rx+0x31d/0x900 [mac80211] + iwlagn_rx_reply_rx+0x3db/0x6f0 [iwldvm] + iwl_rx_dispatch+0x8e/0xf0 [iwldvm] + iwl_pcie_irq_handler+0xe3c/0x12f0 [iwlwifi] + irq_thread_fn+0x20/0x50 + irq_thread+0x11f/0x150 + kthread+0xd2/0xf0 + } hitcount: 98 len: 664329 + { common_stacktrace: + __netif_receive_skb_core+0x46d/0x990 + __netif_receive_skb+0x18/0x60 + process_backlog+0xa8/0x150 + net_rx_action+0x15d/0x340 + __do_softirq+0x114/0x2c0 + do_softirq_own_stack+0x1c/0x30 + do_softirq+0x65/0x70 + __local_bh_enable_ip+0xb5/0xc0 + ip_finish_output+0x1f4/0x840 + ip_output+0x6b/0xc0 + ip_local_out_sk+0x31/0x40 + ip_send_skb+0x1a/0x50 + udp_send_skb+0x173/0x2a0 + udp_sendmsg+0x2bf/0x9f0 + inet_sendmsg+0x64/0xa0 + sock_sendmsg+0x3d/0x50 + } hitcount: 115 len: 13030 + { common_stacktrace: + __netif_receive_skb_core+0x46d/0x990 + __netif_receive_skb+0x18/0x60 + netif_receive_skb_internal+0x23/0x90 + napi_gro_complete+0xa4/0xe0 + napi_gro_flush+0x6d/0x90 + iwl_pcie_irq_handler+0x92a/0x12f0 [iwlwifi] + irq_thread_fn+0x20/0x50 + irq_thread+0x11f/0x150 + kthread+0xd2/0xf0 + ret_from_fork+0x42/0x70 + } hitcount: 934 len: 5512212 + + Totals: + Hits: 1232 + Entries: 4 + Dropped: 0 + + The above shows all the netif_receive_skb callpaths and their total + lengths for the duration of the wget command. + + The 'clear' hist trigger param can be used to clear the hash table. + Suppose we wanted to try another run of the previous example but + this time also wanted to see the complete list of events that went + into the histogram. In order to avoid having to set everything up + again, we can just clear the histogram first:: + + # echo 'hist:key=common_stacktrace:vals=len:clear' >> \ + /sys/kernel/tracing/events/net/netif_receive_skb/trigger + + Just to verify that it is in fact cleared, here's what we now see in + the hist file:: + + # cat /sys/kernel/tracing/events/net/netif_receive_skb/hist + # trigger info: hist:keys=common_stacktrace:vals=len:sort=hitcount:size=2048 [paused] + + Totals: + Hits: 0 + Entries: 0 + Dropped: 0 + + Since we want to see the detailed list of every netif_receive_skb + event occurring during the new run, which are in fact the same + events being aggregated into the hash table, we add some additional + 'enable_event' events to the triggering sched_process_exec and + sched_process_exit events as such:: + + # echo 'enable_event:net:netif_receive_skb if filename==/usr/bin/wget' > \ + /sys/kernel/tracing/events/sched/sched_process_exec/trigger + + # echo 'disable_event:net:netif_receive_skb if comm==wget' > \ + /sys/kernel/tracing/events/sched/sched_process_exit/trigger + + If you read the trigger files for the sched_process_exec and + sched_process_exit triggers, you should see two triggers for each: + one enabling/disabling the hist aggregation and the other + enabling/disabling the logging of events:: + + # cat /sys/kernel/tracing/events/sched/sched_process_exec/trigger + enable_event:net:netif_receive_skb:unlimited if filename==/usr/bin/wget + enable_hist:net:netif_receive_skb:unlimited if filename==/usr/bin/wget + + # cat /sys/kernel/tracing/events/sched/sched_process_exit/trigger + enable_event:net:netif_receive_skb:unlimited if comm==wget + disable_hist:net:netif_receive_skb:unlimited if comm==wget + + In other words, whenever either of the sched_process_exec or + sched_process_exit events is hit and matches 'wget', it enables or + disables both the histogram and the event log, and what you end up + with is a hash table and set of events just covering the specified + duration. Run the wget command again:: + + $ wget https://www.kernel.org/pub/linux/kernel/v3.x/patch-3.19.xz + + Displaying the 'hist' file should show something similar to what you + saw in the last run, but this time you should also see the + individual events in the trace file:: + + # cat /sys/kernel/tracing/trace + + # tracer: nop + # + # entries-in-buffer/entries-written: 183/1426 #P:4 + # + # _-----=> irqs-off + # / _----=> need-resched + # | / _---=> hardirq/softirq + # || / _--=> preempt-depth + # ||| / delay + # TASK-PID CPU# |||| TIMESTAMP FUNCTION + # | | | |||| | | + wget-15108 [000] ..s1 31769.606929: netif_receive_skb: dev=lo skbaddr=ffff88009c353100 len=60 + wget-15108 [000] ..s1 31769.606999: netif_receive_skb: dev=lo skbaddr=ffff88009c353200 len=60 + dnsmasq-1382 [000] ..s1 31769.677652: netif_receive_skb: dev=lo skbaddr=ffff88009c352b00 len=130 + dnsmasq-1382 [000] ..s1 31769.685917: netif_receive_skb: dev=lo skbaddr=ffff88009c352200 len=138 + ##### CPU 2 buffer started #### + irq/29-iwlwifi-559 [002] ..s. 31772.031529: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d433d00 len=2948 + irq/29-iwlwifi-559 [002] ..s. 31772.031572: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d432200 len=1500 + irq/29-iwlwifi-559 [002] ..s. 31772.032196: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d433100 len=2948 + irq/29-iwlwifi-559 [002] ..s. 31772.032761: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d433000 len=2948 + irq/29-iwlwifi-559 [002] ..s. 31772.033220: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d432e00 len=1500 + . + . + . + + The following example demonstrates how multiple hist triggers can be + attached to a given event. This capability can be useful for + creating a set of different summaries derived from the same set of + events, or for comparing the effects of different filters, among + other things:: + + # echo 'hist:keys=skbaddr.hex:vals=len if len < 0' >> \ + /sys/kernel/tracing/events/net/netif_receive_skb/trigger + # echo 'hist:keys=skbaddr.hex:vals=len if len > 4096' >> \ + /sys/kernel/tracing/events/net/netif_receive_skb/trigger + # echo 'hist:keys=skbaddr.hex:vals=len if len == 256' >> \ + /sys/kernel/tracing/events/net/netif_receive_skb/trigger + # echo 'hist:keys=skbaddr.hex:vals=len' >> \ + /sys/kernel/tracing/events/net/netif_receive_skb/trigger + # echo 'hist:keys=len:vals=common_preempt_count' >> \ + /sys/kernel/tracing/events/net/netif_receive_skb/trigger + + The above set of commands create four triggers differing only in + their filters, along with a completely different though fairly + nonsensical trigger. Note that in order to append multiple hist + triggers to the same file, you should use the '>>' operator to + append them ('>' will also add the new hist trigger, but will remove + any existing hist triggers beforehand). + + Displaying the contents of the 'hist' file for the event shows the + contents of all five histograms:: + + # cat /sys/kernel/tracing/events/net/netif_receive_skb/hist + + # event histogram + # + # trigger info: hist:keys=len:vals=hitcount,common_preempt_count:sort=hitcount:size=2048 [active] + # + + { len: 176 } hitcount: 1 common_preempt_count: 0 + { len: 223 } hitcount: 1 common_preempt_count: 0 + { len: 4854 } hitcount: 1 common_preempt_count: 0 + { len: 395 } hitcount: 1 common_preempt_count: 0 + { len: 177 } hitcount: 1 common_preempt_count: 0 + { len: 446 } hitcount: 1 common_preempt_count: 0 + { len: 1601 } hitcount: 1 common_preempt_count: 0 + . + . + . + { len: 1280 } hitcount: 66 common_preempt_count: 0 + { len: 116 } hitcount: 81 common_preempt_count: 40 + { len: 708 } hitcount: 112 common_preempt_count: 0 + { len: 46 } hitcount: 221 common_preempt_count: 0 + { len: 1264 } hitcount: 458 common_preempt_count: 0 + + Totals: + Hits: 1428 + Entries: 147 + Dropped: 0 + + + # event histogram + # + # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 [active] + # + + { skbaddr: ffff8800baee5e00 } hitcount: 1 len: 130 + { skbaddr: ffff88005f3d5600 } hitcount: 1 len: 1280 + { skbaddr: ffff88005f3d4900 } hitcount: 1 len: 1280 + { skbaddr: ffff88009fed6300 } hitcount: 1 len: 115 + { skbaddr: ffff88009fe0ad00 } hitcount: 1 len: 115 + { skbaddr: ffff88008cdb1900 } hitcount: 1 len: 46 + { skbaddr: ffff880064b5ef00 } hitcount: 1 len: 118 + { skbaddr: ffff880044e3c700 } hitcount: 1 len: 60 + { skbaddr: ffff880100065900 } hitcount: 1 len: 46 + { skbaddr: ffff8800d46bd500 } hitcount: 1 len: 116 + { skbaddr: ffff88005f3d5f00 } hitcount: 1 len: 1280 + { skbaddr: ffff880100064700 } hitcount: 1 len: 365 + { skbaddr: ffff8800badb6f00 } hitcount: 1 len: 60 + . + . + . + { skbaddr: ffff88009fe0be00 } hitcount: 27 len: 24677 + { skbaddr: ffff88009fe0a400 } hitcount: 27 len: 23052 + { skbaddr: ffff88009fe0b700 } hitcount: 31 len: 25589 + { skbaddr: ffff88009fe0b600 } hitcount: 32 len: 27326 + { skbaddr: ffff88006a462800 } hitcount: 68 len: 71678 + { skbaddr: ffff88006a463700 } hitcount: 70 len: 72678 + { skbaddr: ffff88006a462b00 } hitcount: 71 len: 77589 + { skbaddr: ffff88006a463600 } hitcount: 73 len: 71307 + { skbaddr: ffff88006a462200 } hitcount: 81 len: 81032 + + Totals: + Hits: 1451 + Entries: 318 + Dropped: 0 + + + # event histogram + # + # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 if len == 256 [active] + # + + + Totals: + Hits: 0 + Entries: 0 + Dropped: 0 + + + # event histogram + # + # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 if len > 4096 [active] + # + + { skbaddr: ffff88009fd2c300 } hitcount: 1 len: 7212 + { skbaddr: ffff8800d2bcce00 } hitcount: 1 len: 7212 + { skbaddr: ffff8800d2bcd700 } hitcount: 1 len: 7212 + { skbaddr: ffff8800d2bcda00 } hitcount: 1 len: 21492 + { skbaddr: ffff8800ae2e2d00 } hitcount: 1 len: 7212 + { skbaddr: ffff8800d2bcdb00 } hitcount: 1 len: 7212 + { skbaddr: ffff88006a4df500 } hitcount: 1 len: 4854 + { skbaddr: ffff88008ce47b00 } hitcount: 1 len: 18636 + { skbaddr: ffff8800ae2e2200 } hitcount: 1 len: 12924 + { skbaddr: ffff88005f3e1000 } hitcount: 1 len: 4356 + { skbaddr: ffff8800d2bcdc00 } hitcount: 2 len: 24420 + { skbaddr: ffff8800d2bcc200 } hitcount: 2 len: 12996 + + Totals: + Hits: 14 + Entries: 12 + Dropped: 0 + + + # event histogram + # + # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 if len < 0 [active] + # + + + Totals: + Hits: 0 + Entries: 0 + Dropped: 0 + + Named triggers can be used to have triggers share a common set of + histogram data. This capability is mostly useful for combining the + output of events generated by tracepoints contained inside inline + functions, but names can be used in a hist trigger on any event. + For example, these two triggers when hit will update the same 'len' + field in the shared 'foo' histogram data:: + + # echo 'hist:name=foo:keys=skbaddr.hex:vals=len' > \ + /sys/kernel/tracing/events/net/netif_receive_skb/trigger + # echo 'hist:name=foo:keys=skbaddr.hex:vals=len' > \ + /sys/kernel/tracing/events/net/netif_rx/trigger + + You can see that they're updating common histogram data by reading + each event's hist files at the same time:: + + # cat /sys/kernel/tracing/events/net/netif_receive_skb/hist; + cat /sys/kernel/tracing/events/net/netif_rx/hist + + # event histogram + # + # trigger info: hist:name=foo:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 [active] + # + + { skbaddr: ffff88000ad53500 } hitcount: 1 len: 46 + { skbaddr: ffff8800af5a1500 } hitcount: 1 len: 76 + { skbaddr: ffff8800d62a1900 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bccb00 } hitcount: 1 len: 468 + { skbaddr: ffff8800d3c69900 } hitcount: 1 len: 46 + { skbaddr: ffff88009ff09100 } hitcount: 1 len: 52 + { skbaddr: ffff88010f13ab00 } hitcount: 1 len: 168 + { skbaddr: ffff88006a54f400 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bcc500 } hitcount: 1 len: 260 + { skbaddr: ffff880064505000 } hitcount: 1 len: 46 + { skbaddr: ffff8800baf24e00 } hitcount: 1 len: 32 + { skbaddr: ffff88009fe0ad00 } hitcount: 1 len: 46 + { skbaddr: ffff8800d3edff00 } hitcount: 1 len: 44 + { skbaddr: ffff88009fe0b400 } hitcount: 1 len: 168 + { skbaddr: ffff8800a1c55a00 } hitcount: 1 len: 40 + { skbaddr: ffff8800d2bcd100 } hitcount: 1 len: 40 + { skbaddr: ffff880064505f00 } hitcount: 1 len: 174 + { skbaddr: ffff8800a8bff200 } hitcount: 1 len: 160 + { skbaddr: ffff880044e3cc00 } hitcount: 1 len: 76 + { skbaddr: ffff8800a8bfe700 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bcdc00 } hitcount: 1 len: 32 + { skbaddr: ffff8800a1f64800 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bcde00 } hitcount: 1 len: 988 + { skbaddr: ffff88006a5dea00 } hitcount: 1 len: 46 + { skbaddr: ffff88002e37a200 } hitcount: 1 len: 44 + { skbaddr: ffff8800a1f32c00 } hitcount: 2 len: 676 + { skbaddr: ffff88000ad52600 } hitcount: 2 len: 107 + { skbaddr: ffff8800a1f91e00 } hitcount: 2 len: 92 + { skbaddr: ffff8800af5a0200 } hitcount: 2 len: 142 + { skbaddr: ffff8800d2bcc600 } hitcount: 2 len: 220 + { skbaddr: ffff8800ba36f500 } hitcount: 2 len: 92 + { skbaddr: ffff8800d021f800 } hitcount: 2 len: 92 + { skbaddr: ffff8800a1f33600 } hitcount: 2 len: 675 + { skbaddr: ffff8800a8bfff00 } hitcount: 3 len: 138 + { skbaddr: ffff8800d62a1300 } hitcount: 3 len: 138 + { skbaddr: ffff88002e37a100 } hitcount: 4 len: 184 + { skbaddr: ffff880064504400 } hitcount: 4 len: 184 + { skbaddr: ffff8800a8bfec00 } hitcount: 4 len: 184 + { skbaddr: ffff88000ad53700 } hitcount: 5 len: 230 + { skbaddr: ffff8800d2bcdb00 } hitcount: 5 len: 196 + { skbaddr: ffff8800a1f90000 } hitcount: 6 len: 276 + { skbaddr: ffff88006a54f900 } hitcount: 6 len: 276 + + Totals: + Hits: 81 + Entries: 42 + Dropped: 0 + # event histogram + # + # trigger info: hist:name=foo:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 [active] + # + + { skbaddr: ffff88000ad53500 } hitcount: 1 len: 46 + { skbaddr: ffff8800af5a1500 } hitcount: 1 len: 76 + { skbaddr: ffff8800d62a1900 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bccb00 } hitcount: 1 len: 468 + { skbaddr: ffff8800d3c69900 } hitcount: 1 len: 46 + { skbaddr: ffff88009ff09100 } hitcount: 1 len: 52 + { skbaddr: ffff88010f13ab00 } hitcount: 1 len: 168 + { skbaddr: ffff88006a54f400 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bcc500 } hitcount: 1 len: 260 + { skbaddr: ffff880064505000 } hitcount: 1 len: 46 + { skbaddr: ffff8800baf24e00 } hitcount: 1 len: 32 + { skbaddr: ffff88009fe0ad00 } hitcount: 1 len: 46 + { skbaddr: ffff8800d3edff00 } hitcount: 1 len: 44 + { skbaddr: ffff88009fe0b400 } hitcount: 1 len: 168 + { skbaddr: ffff8800a1c55a00 } hitcount: 1 len: 40 + { skbaddr: ffff8800d2bcd100 } hitcount: 1 len: 40 + { skbaddr: ffff880064505f00 } hitcount: 1 len: 174 + { skbaddr: ffff8800a8bff200 } hitcount: 1 len: 160 + { skbaddr: ffff880044e3cc00 } hitcount: 1 len: 76 + { skbaddr: ffff8800a8bfe700 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bcdc00 } hitcount: 1 len: 32 + { skbaddr: ffff8800a1f64800 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bcde00 } hitcount: 1 len: 988 + { skbaddr: ffff88006a5dea00 } hitcount: 1 len: 46 + { skbaddr: ffff88002e37a200 } hitcount: 1 len: 44 + { skbaddr: ffff8800a1f32c00 } hitcount: 2 len: 676 + { skbaddr: ffff88000ad52600 } hitcount: 2 len: 107 + { skbaddr: ffff8800a1f91e00 } hitcount: 2 len: 92 + { skbaddr: ffff8800af5a0200 } hitcount: 2 len: 142 + { skbaddr: ffff8800d2bcc600 } hitcount: 2 len: 220 + { skbaddr: ffff8800ba36f500 } hitcount: 2 len: 92 + { skbaddr: ffff8800d021f800 } hitcount: 2 len: 92 + { skbaddr: ffff8800a1f33600 } hitcount: 2 len: 675 + { skbaddr: ffff8800a8bfff00 } hitcount: 3 len: 138 + { skbaddr: ffff8800d62a1300 } hitcount: 3 len: 138 + { skbaddr: ffff88002e37a100 } hitcount: 4 len: 184 + { skbaddr: ffff880064504400 } hitcount: 4 len: 184 + { skbaddr: ffff8800a8bfec00 } hitcount: 4 len: 184 + { skbaddr: ffff88000ad53700 } hitcount: 5 len: 230 + { skbaddr: ffff8800d2bcdb00 } hitcount: 5 len: 196 + { skbaddr: ffff8800a1f90000 } hitcount: 6 len: 276 + { skbaddr: ffff88006a54f900 } hitcount: 6 len: 276 + + Totals: + Hits: 81 + Entries: 42 + Dropped: 0 + + And here's an example that shows how to combine histogram data from + any two events even if they don't share any 'compatible' fields + other than 'hitcount' and 'common_stacktrace'. These commands create a + couple of triggers named 'bar' using those fields:: + + # echo 'hist:name=bar:key=common_stacktrace:val=hitcount' > \ + /sys/kernel/tracing/events/sched/sched_process_fork/trigger + # echo 'hist:name=bar:key=common_stacktrace:val=hitcount' > \ + /sys/kernel/tracing/events/net/netif_rx/trigger + + And displaying the output of either shows some interesting if + somewhat confusing output:: + + # cat /sys/kernel/tracing/events/sched/sched_process_fork/hist + # cat /sys/kernel/tracing/events/net/netif_rx/hist + + # event histogram + # + # trigger info: hist:name=bar:keys=common_stacktrace:vals=hitcount:sort=hitcount:size=2048 [active] + # + + { common_stacktrace: + kernel_clone+0x18e/0x330 + kernel_thread+0x29/0x30 + kthreadd+0x154/0x1b0 + ret_from_fork+0x3f/0x70 + } hitcount: 1 + { common_stacktrace: + netif_rx_internal+0xb2/0xd0 + netif_rx_ni+0x20/0x70 + dev_loopback_xmit+0xaa/0xd0 + ip_mc_output+0x126/0x240 + ip_local_out_sk+0x31/0x40 + igmp_send_report+0x1e9/0x230 + igmp_timer_expire+0xe9/0x120 + call_timer_fn+0x39/0xf0 + run_timer_softirq+0x1e1/0x290 + __do_softirq+0xfd/0x290 + irq_exit+0x98/0xb0 + smp_apic_timer_interrupt+0x4a/0x60 + apic_timer_interrupt+0x6d/0x80 + cpuidle_enter+0x17/0x20 + call_cpuidle+0x3b/0x60 + cpu_startup_entry+0x22d/0x310 + } hitcount: 1 + { common_stacktrace: + netif_rx_internal+0xb2/0xd0 + netif_rx_ni+0x20/0x70 + dev_loopback_xmit+0xaa/0xd0 + ip_mc_output+0x17f/0x240 + ip_local_out_sk+0x31/0x40 + ip_send_skb+0x1a/0x50 + udp_send_skb+0x13e/0x270 + udp_sendmsg+0x2bf/0x980 + inet_sendmsg+0x67/0xa0 + sock_sendmsg+0x38/0x50 + SYSC_sendto+0xef/0x170 + SyS_sendto+0xe/0x10 + entry_SYSCALL_64_fastpath+0x12/0x6a + } hitcount: 2 + { common_stacktrace: + netif_rx_internal+0xb2/0xd0 + netif_rx+0x1c/0x60 + loopback_xmit+0x6c/0xb0 + dev_hard_start_xmit+0x219/0x3a0 + __dev_queue_xmit+0x415/0x4f0 + dev_queue_xmit_sk+0x13/0x20 + ip_finish_output2+0x237/0x340 + ip_finish_output+0x113/0x1d0 + ip_output+0x66/0xc0 + ip_local_out_sk+0x31/0x40 + ip_send_skb+0x1a/0x50 + udp_send_skb+0x16d/0x270 + udp_sendmsg+0x2bf/0x980 + inet_sendmsg+0x67/0xa0 + sock_sendmsg+0x38/0x50 + ___sys_sendmsg+0x14e/0x270 + } hitcount: 76 + { common_stacktrace: + netif_rx_internal+0xb2/0xd0 + netif_rx+0x1c/0x60 + loopback_xmit+0x6c/0xb0 + dev_hard_start_xmit+0x219/0x3a0 + __dev_queue_xmit+0x415/0x4f0 + dev_queue_xmit_sk+0x13/0x20 + ip_finish_output2+0x237/0x340 + ip_finish_output+0x113/0x1d0 + ip_output+0x66/0xc0 + ip_local_out_sk+0x31/0x40 + ip_send_skb+0x1a/0x50 + udp_send_skb+0x16d/0x270 + udp_sendmsg+0x2bf/0x980 + inet_sendmsg+0x67/0xa0 + sock_sendmsg+0x38/0x50 + ___sys_sendmsg+0x269/0x270 + } hitcount: 77 + { common_stacktrace: + netif_rx_internal+0xb2/0xd0 + netif_rx+0x1c/0x60 + loopback_xmit+0x6c/0xb0 + dev_hard_start_xmit+0x219/0x3a0 + __dev_queue_xmit+0x415/0x4f0 + dev_queue_xmit_sk+0x13/0x20 + ip_finish_output2+0x237/0x340 + ip_finish_output+0x113/0x1d0 + ip_output+0x66/0xc0 + ip_local_out_sk+0x31/0x40 + ip_send_skb+0x1a/0x50 + udp_send_skb+0x16d/0x270 + udp_sendmsg+0x2bf/0x980 + inet_sendmsg+0x67/0xa0 + sock_sendmsg+0x38/0x50 + SYSC_sendto+0xef/0x170 + } hitcount: 88 + { common_stacktrace: + kernel_clone+0x18e/0x330 + SyS_clone+0x19/0x20 + entry_SYSCALL_64_fastpath+0x12/0x6a + } hitcount: 244 + + Totals: + Hits: 489 + Entries: 7 + Dropped: 0 + +2.2 Inter-event hist triggers +----------------------------- + +Inter-event hist triggers are hist triggers that combine values from +one or more other events and create a histogram using that data. Data +from an inter-event histogram can in turn become the source for +further combined histograms, thus providing a chain of related +histograms, which is important for some applications. + +The most important example of an inter-event quantity that can be used +in this manner is latency, which is simply a difference in timestamps +between two events. Although latency is the most important +inter-event quantity, note that because the support is completely +general across the trace event subsystem, any event field can be used +in an inter-event quantity. + +An example of a histogram that combines data from other histograms +into a useful chain would be a 'wakeupswitch latency' histogram that +combines a 'wakeup latency' histogram and a 'switch latency' +histogram. + +Normally, a hist trigger specification consists of a (possibly +compound) key along with one or more numeric values, which are +continually updated sums associated with that key. A histogram +specification in this case consists of individual key and value +specifications that refer to trace event fields associated with a +single event type. + +The inter-event hist trigger extension allows fields from multiple +events to be referenced and combined into a multi-event histogram +specification. In support of this overall goal, a few enabling +features have been added to the hist trigger support: + + - In order to compute an inter-event quantity, a value from one + event needs to saved and then referenced from another event. This + requires the introduction of support for histogram 'variables'. + + - The computation of inter-event quantities and their combination + require some minimal amount of support for applying simple + expressions to variables (+ and -). + + - A histogram consisting of inter-event quantities isn't logically a + histogram on either event (so having the 'hist' file for either + event host the histogram output doesn't really make sense). To + address the idea that the histogram is associated with a + combination of events, support is added allowing the creation of + 'synthetic' events that are events derived from other events. + These synthetic events are full-fledged events just like any other + and can be used as such, as for instance to create the + 'combination' histograms mentioned previously. + + - A set of 'actions' can be associated with histogram entries - + these can be used to generate the previously mentioned synthetic + events, but can also be used for other purposes, such as for + example saving context when a 'max' latency has been hit. + + - Trace events don't have a 'timestamp' associated with them, but + there is an implicit timestamp saved along with an event in the + underlying ftrace ring buffer. This timestamp is now exposed as a + a synthetic field named 'common_timestamp' which can be used in + histograms as if it were any other event field; it isn't an actual + field in the trace format but rather is a synthesized value that + nonetheless can be used as if it were an actual field. By default + it is in units of nanoseconds; appending '.usecs' to a + common_timestamp field changes the units to microseconds. + +A note on inter-event timestamps: If common_timestamp is used in a +histogram, the trace buffer is automatically switched over to using +absolute timestamps and the "global" trace clock, in order to avoid +bogus timestamp differences with other clocks that aren't coherent +across CPUs. This can be overridden by specifying one of the other +trace clocks instead, using the "clock=XXX" hist trigger attribute, +where XXX is any of the clocks listed in the tracing/trace_clock +pseudo-file. + +These features are described in more detail in the following sections. + +2.2.1 Histogram Variables +------------------------- + +Variables are simply named locations used for saving and retrieving +values between matching events. A 'matching' event is defined as an +event that has a matching key - if a variable is saved for a histogram +entry corresponding to that key, any subsequent event with a matching +key can access that variable. + +A variable's value is normally available to any subsequent event until +it is set to something else by a subsequent event. The one exception +to that rule is that any variable used in an expression is essentially +'read-once' - once it's used by an expression in a subsequent event, +it's reset to its 'unset' state, which means it can't be used again +unless it's set again. This ensures not only that an event doesn't +use an uninitialized variable in a calculation, but that that variable +is used only once and not for any unrelated subsequent match. + +The basic syntax for saving a variable is to simply prefix a unique +variable name not corresponding to any keyword along with an '=' sign +to any event field. + +Either keys or values can be saved and retrieved in this way. This +creates a variable named 'ts0' for a histogram entry with the key +'next_pid':: + + # echo 'hist:keys=next_pid:vals=$ts0:ts0=common_timestamp ... >> \ + event/trigger + +The ts0 variable can be accessed by any subsequent event having the +same pid as 'next_pid'. + +Variable references are formed by prepending the variable name with +the '$' sign. Thus for example, the ts0 variable above would be +referenced as '$ts0' in expressions. + +Because 'vals=' is used, the common_timestamp variable value above +will also be summed as a normal histogram value would (though for a +timestamp it makes little sense). + +The below shows that a key value can also be saved in the same way:: + + # echo 'hist:timer_pid=common_pid:key=timer_pid ...' >> event/trigger + +If a variable isn't a key variable or prefixed with 'vals=', the +associated event field will be saved in a variable but won't be summed +as a value:: + + # echo 'hist:keys=next_pid:ts1=common_timestamp ...' >> event/trigger + +Multiple variables can be assigned at the same time. The below would +result in both ts0 and b being created as variables, with both +common_timestamp and field1 additionally being summed as values:: + + # echo 'hist:keys=pid:vals=$ts0,$b:ts0=common_timestamp,b=field1 ...' >> \ + event/trigger + +Note that variable assignments can appear either preceding or +following their use. The command below behaves identically to the +command above:: + + # echo 'hist:keys=pid:ts0=common_timestamp,b=field1:vals=$ts0,$b ...' >> \ + event/trigger + +Any number of variables not bound to a 'vals=' prefix can also be +assigned by simply separating them with colons. Below is the same +thing but without the values being summed in the histogram:: + + # echo 'hist:keys=pid:ts0=common_timestamp:b=field1 ...' >> event/trigger + +Variables set as above can be referenced and used in expressions on +another event. + +For example, here's how a latency can be calculated:: + + # echo 'hist:keys=pid,prio:ts0=common_timestamp ...' >> event1/trigger + # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp-$ts0 ...' >> event2/trigger + +In the first line above, the event's timestamp is saved into the +variable ts0. In the next line, ts0 is subtracted from the second +event's timestamp to produce the latency, which is then assigned into +yet another variable, 'wakeup_lat'. The hist trigger below in turn +makes use of the wakeup_lat variable to compute a combined latency +using the same key and variable from yet another event:: + + # echo 'hist:key=pid:wakeupswitch_lat=$wakeup_lat+$switchtime_lat ...' >> event3/trigger + +Expressions support the use of addition, subtraction, multiplication and +division operators (+-\*/). + +Note if division by zero cannot be detected at parse time (i.e. the +divisor is not a constant), the result will be -1. + +Numeric constants can also be used directly in an expression:: + + # echo 'hist:keys=next_pid:timestamp_secs=common_timestamp/1000000 ...' >> event/trigger + +or assigned to a variable and referenced in a subsequent expression:: + + # echo 'hist:keys=next_pid:us_per_sec=1000000 ...' >> event/trigger + # echo 'hist:keys=next_pid:timestamp_secs=common_timestamp/$us_per_sec ...' >> event/trigger + +Variables can even hold stacktraces, which are useful with synthetic events. + +2.2.2 Synthetic Events +---------------------- + +Synthetic events are user-defined events generated from hist trigger +variables or fields associated with one or more other events. Their +purpose is to provide a mechanism for displaying data spanning +multiple events consistent with the existing and already familiar +usage for normal events. + +To define a synthetic event, the user writes a simple specification +consisting of the name of the new event along with one or more +variables and their types, which can be any valid field type, +separated by semicolons, to the tracing/synthetic_events file. + +See synth_field_size() for available types. + +If field_name contains [n], the field is considered to be a static array. + +If field_names contains[] (no subscript), the field is considered to +be a dynamic array, which will only take as much space in the event as +is required to hold the array. + +A string field can be specified using either the static notation: + + char name[32]; + +Or the dynamic: + + char name[]; + +The size limit for either is 256. + +For instance, the following creates a new event named 'wakeup_latency' +with 3 fields: lat, pid, and prio. Each of those fields is simply a +variable reference to a variable on another event:: + + # echo 'wakeup_latency \ + u64 lat; \ + pid_t pid; \ + int prio' >> \ + /sys/kernel/tracing/synthetic_events + +Reading the tracing/synthetic_events file lists all the currently +defined synthetic events, in this case the event defined above:: + + # cat /sys/kernel/tracing/synthetic_events + wakeup_latency u64 lat; pid_t pid; int prio + +An existing synthetic event definition can be removed by prepending +the command that defined it with a '!':: + + # echo '!wakeup_latency u64 lat pid_t pid int prio' >> \ + /sys/kernel/tracing/synthetic_events + +At this point, there isn't yet an actual 'wakeup_latency' event +instantiated in the event subsystem - for this to happen, a 'hist +trigger action' needs to be instantiated and bound to actual fields +and variables defined on other events (see Section 2.2.3 below on +how that is done using hist trigger 'onmatch' action). Once that is +done, the 'wakeup_latency' synthetic event instance is created. + +The new event is created under the tracing/events/synthetic/ directory +and looks and behaves just like any other event:: + + # ls /sys/kernel/tracing/events/synthetic/wakeup_latency + enable filter format hist id trigger + +A histogram can now be defined for the new synthetic event:: + + # echo 'hist:keys=pid,prio,lat.log2:sort=lat' >> \ + /sys/kernel/tracing/events/synthetic/wakeup_latency/trigger + +The above shows the latency "lat" in a power of 2 grouping. + +Like any other event, once a histogram is enabled for the event, the +output can be displayed by reading the event's 'hist' file:: + + # cat /sys/kernel/tracing/events/synthetic/wakeup_latency/hist + + # event histogram + # + # trigger info: hist:keys=pid,prio,lat.log2:vals=hitcount:sort=lat.log2:size=2048 [active] + # + + { pid: 2035, prio: 9, lat: ~ 2^2 } hitcount: 43 + { pid: 2034, prio: 9, lat: ~ 2^2 } hitcount: 60 + { pid: 2029, prio: 9, lat: ~ 2^2 } hitcount: 965 + { pid: 2034, prio: 120, lat: ~ 2^2 } hitcount: 9 + { pid: 2033, prio: 120, lat: ~ 2^2 } hitcount: 5 + { pid: 2030, prio: 9, lat: ~ 2^2 } hitcount: 335 + { pid: 2030, prio: 120, lat: ~ 2^2 } hitcount: 10 + { pid: 2032, prio: 120, lat: ~ 2^2 } hitcount: 1 + { pid: 2035, prio: 120, lat: ~ 2^2 } hitcount: 2 + { pid: 2031, prio: 9, lat: ~ 2^2 } hitcount: 176 + { pid: 2028, prio: 120, lat: ~ 2^2 } hitcount: 15 + { pid: 2033, prio: 9, lat: ~ 2^2 } hitcount: 91 + { pid: 2032, prio: 9, lat: ~ 2^2 } hitcount: 125 + { pid: 2029, prio: 120, lat: ~ 2^2 } hitcount: 4 + { pid: 2031, prio: 120, lat: ~ 2^2 } hitcount: 3 + { pid: 2029, prio: 120, lat: ~ 2^3 } hitcount: 2 + { pid: 2035, prio: 9, lat: ~ 2^3 } hitcount: 41 + { pid: 2030, prio: 120, lat: ~ 2^3 } hitcount: 1 + { pid: 2032, prio: 9, lat: ~ 2^3 } hitcount: 32 + { pid: 2031, prio: 9, lat: ~ 2^3 } hitcount: 44 + { pid: 2034, prio: 9, lat: ~ 2^3 } hitcount: 40 + { pid: 2030, prio: 9, lat: ~ 2^3 } hitcount: 29 + { pid: 2033, prio: 9, lat: ~ 2^3 } hitcount: 31 + { pid: 2029, prio: 9, lat: ~ 2^3 } hitcount: 31 + { pid: 2028, prio: 120, lat: ~ 2^3 } hitcount: 18 + { pid: 2031, prio: 120, lat: ~ 2^3 } hitcount: 2 + { pid: 2028, prio: 120, lat: ~ 2^4 } hitcount: 1 + { pid: 2029, prio: 9, lat: ~ 2^4 } hitcount: 4 + { pid: 2031, prio: 120, lat: ~ 2^7 } hitcount: 1 + { pid: 2032, prio: 120, lat: ~ 2^7 } hitcount: 1 + + Totals: + Hits: 2122 + Entries: 30 + Dropped: 0 + + +The latency values can also be grouped linearly by a given size with +the ".buckets" modifier and specify a size (in this case groups of 10):: + + # echo 'hist:keys=pid,prio,lat.buckets=10:sort=lat' >> \ + /sys/kernel/tracing/events/synthetic/wakeup_latency/trigger + + # event histogram + # + # trigger info: hist:keys=pid,prio,lat.buckets=10:vals=hitcount:sort=lat.buckets=10:size=2048 [active] + # + + { pid: 2067, prio: 9, lat: ~ 0-9 } hitcount: 220 + { pid: 2068, prio: 9, lat: ~ 0-9 } hitcount: 157 + { pid: 2070, prio: 9, lat: ~ 0-9 } hitcount: 100 + { pid: 2067, prio: 120, lat: ~ 0-9 } hitcount: 6 + { pid: 2065, prio: 120, lat: ~ 0-9 } hitcount: 2 + { pid: 2066, prio: 120, lat: ~ 0-9 } hitcount: 2 + { pid: 2069, prio: 9, lat: ~ 0-9 } hitcount: 122 + { pid: 2069, prio: 120, lat: ~ 0-9 } hitcount: 8 + { pid: 2070, prio: 120, lat: ~ 0-9 } hitcount: 1 + { pid: 2068, prio: 120, lat: ~ 0-9 } hitcount: 7 + { pid: 2066, prio: 9, lat: ~ 0-9 } hitcount: 365 + { pid: 2064, prio: 120, lat: ~ 0-9 } hitcount: 35 + { pid: 2065, prio: 9, lat: ~ 0-9 } hitcount: 998 + { pid: 2071, prio: 9, lat: ~ 0-9 } hitcount: 85 + { pid: 2065, prio: 9, lat: ~ 10-19 } hitcount: 2 + { pid: 2064, prio: 120, lat: ~ 10-19 } hitcount: 2 + + Totals: + Hits: 2112 + Entries: 16 + Dropped: 0 + +To save stacktraces, create a synthetic event with a field of type "unsigned long[]" +or even just "long[]". For example, to see how long a task is blocked in an +uninterruptible state:: + + # cd /sys/kernel/tracing + # echo 's:block_lat pid_t pid; u64 delta; unsigned long[] stack;' > dynamic_events + # echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=common_stacktrace if prev_state == 2' >> events/sched/sched_switch/trigger + # echo 'hist:keys=prev_pid:delta=common_timestamp.usecs-$ts,s=$st:onmax($delta).trace(block_lat,prev_pid,$delta,$s)' >> events/sched/sched_switch/trigger + # echo 1 > events/synthetic/block_lat/enable + # cat trace + + # tracer: nop + # + # entries-in-buffer/entries-written: 2/2 #P:8 + # + # _-----=> irqs-off/BH-disabled + # / _----=> need-resched + # | / _---=> hardirq/softirq + # || / _--=> preempt-depth + # ||| / _-=> migrate-disable + # |||| / delay + # TASK-PID CPU# ||||| TIMESTAMP FUNCTION + # | | | ||||| | | + -0 [005] d..4. 521.164922: block_lat: pid=0 delta=8322 stack=STACK: + => __schedule+0x448/0x7b0 + => schedule+0x5a/0xb0 + => io_schedule+0x42/0x70 + => bit_wait_io+0xd/0x60 + => __wait_on_bit+0x4b/0x140 + => out_of_line_wait_on_bit+0x91/0xb0 + => jbd2_journal_commit_transaction+0x1679/0x1a70 + => kjournald2+0xa9/0x280 + => kthread+0xe9/0x110 + => ret_from_fork+0x2c/0x50 + + <...>-2 [004] d..4. 525.184257: block_lat: pid=2 delta=76 stack=STACK: + => __schedule+0x448/0x7b0 + => schedule+0x5a/0xb0 + => schedule_timeout+0x11a/0x150 + => wait_for_completion_killable+0x144/0x1f0 + => __kthread_create_on_node+0xe7/0x1e0 + => kthread_create_on_node+0x51/0x70 + => create_worker+0xcc/0x1a0 + => worker_thread+0x2ad/0x380 + => kthread+0xe9/0x110 + => ret_from_fork+0x2c/0x50 + +A synthetic event that has a stacktrace field may use it as a key in +histogram:: + + # echo 'hist:keys=delta.buckets=100,stack.stacktrace:sort=delta' > events/synthetic/block_lat/trigger + # cat events/synthetic/block_lat/hist + + # event histogram + # + # trigger info: hist:keys=delta.buckets=100,stack.stacktrace:vals=hitcount:sort=delta.buckets=100:size=2048 [active] + # + { delta: ~ 0-99, stack.stacktrace __schedule+0xa19/0x1520 + schedule+0x6b/0x110 + io_schedule+0x46/0x80 + bit_wait_io+0x11/0x80 + __wait_on_bit+0x4e/0x120 + out_of_line_wait_on_bit+0x8d/0xb0 + __wait_on_buffer+0x33/0x40 + jbd2_journal_commit_transaction+0x155a/0x19b0 + kjournald2+0xab/0x270 + kthread+0xfa/0x130 + ret_from_fork+0x29/0x50 + } hitcount: 1 + { delta: ~ 0-99, stack.stacktrace __schedule+0xa19/0x1520 + schedule+0x6b/0x110 + io_schedule+0x46/0x80 + rq_qos_wait+0xd0/0x170 + wbt_wait+0x9e/0xf0 + __rq_qos_throttle+0x25/0x40 + blk_mq_submit_bio+0x2c3/0x5b0 + __submit_bio+0xff/0x190 + submit_bio_noacct_nocheck+0x25b/0x2b0 + submit_bio_noacct+0x20b/0x600 + submit_bio+0x28/0x90 + ext4_bio_write_page+0x1e0/0x8c0 + mpage_submit_page+0x60/0x80 + mpage_process_page_bufs+0x16c/0x180 + mpage_prepare_extent_to_map+0x23f/0x530 + } hitcount: 1 + { delta: ~ 0-99, stack.stacktrace __schedule+0xa19/0x1520 + schedule+0x6b/0x110 + schedule_hrtimeout_range_clock+0x97/0x110 + schedule_hrtimeout_range+0x13/0x20 + usleep_range_state+0x65/0x90 + __intel_wait_for_register+0x1c1/0x230 [i915] + intel_psr_wait_for_idle_locked+0x171/0x2a0 [i915] + intel_pipe_update_start+0x169/0x360 [i915] + intel_update_crtc+0x112/0x490 [i915] + skl_commit_modeset_enables+0x199/0x600 [i915] + intel_atomic_commit_tail+0x7c4/0x1080 [i915] + intel_atomic_commit_work+0x12/0x20 [i915] + process_one_work+0x21c/0x3f0 + worker_thread+0x50/0x3e0 + kthread+0xfa/0x130 + } hitcount: 3 + { delta: ~ 0-99, stack.stacktrace __schedule+0xa19/0x1520 + schedule+0x6b/0x110 + schedule_timeout+0x11e/0x160 + __wait_for_common+0x8f/0x190 + wait_for_completion+0x24/0x30 + __flush_work.isra.0+0x1cc/0x360 + flush_work+0xe/0x20 + drm_mode_rmfb+0x18b/0x1d0 [drm] + drm_mode_rmfb_ioctl+0x10/0x20 [drm] + drm_ioctl_kernel+0xb8/0x150 [drm] + drm_ioctl+0x243/0x560 [drm] + __x64_sys_ioctl+0x92/0xd0 + do_syscall_64+0x59/0x90 + entry_SYSCALL_64_after_hwframe+0x72/0xdc + } hitcount: 1 + { delta: ~ 0-99, stack.stacktrace __schedule+0xa19/0x1520 + schedule+0x6b/0x110 + schedule_timeout+0x87/0x160 + __wait_for_common+0x8f/0x190 + wait_for_completion_timeout+0x1d/0x30 + drm_atomic_helper_wait_for_flip_done+0x57/0x90 [drm_kms_helper] + intel_atomic_commit_tail+0x8ce/0x1080 [i915] + intel_atomic_commit_work+0x12/0x20 [i915] + process_one_work+0x21c/0x3f0 + worker_thread+0x50/0x3e0 + kthread+0xfa/0x130 + ret_from_fork+0x29/0x50 + } hitcount: 1 + { delta: ~ 100-199, stack.stacktrace __schedule+0xa19/0x1520 + schedule+0x6b/0x110 + schedule_hrtimeout_range_clock+0x97/0x110 + schedule_hrtimeout_range+0x13/0x20 + usleep_range_state+0x65/0x90 + pci_set_low_power_state+0x17f/0x1f0 + pci_set_power_state+0x49/0x250 + pci_finish_runtime_suspend+0x4a/0x90 + pci_pm_runtime_suspend+0xcb/0x1b0 + __rpm_callback+0x48/0x120 + rpm_callback+0x67/0x70 + rpm_suspend+0x167/0x780 + rpm_idle+0x25a/0x380 + pm_runtime_work+0x93/0xc0 + process_one_work+0x21c/0x3f0 + } hitcount: 1 + + Totals: + Hits: 10 + Entries: 7 + Dropped: 0 + +2.2.3 Hist trigger 'handlers' and 'actions' +------------------------------------------- + +A hist trigger 'action' is a function that's executed (in most cases +conditionally) whenever a histogram entry is added or updated. + +When a histogram entry is added or updated, a hist trigger 'handler' +is what decides whether the corresponding action is actually invoked +or not. + +Hist trigger handlers and actions are paired together in the general +form: + + . + +To specify a handler.action pair for a given event, simply specify +that handler.action pair between colons in the hist trigger +specification. + +In theory, any handler can be combined with any action, but in +practice, not every handler.action combination is currently supported; +if a given handler.action combination isn't supported, the hist +trigger will fail with -EINVAL; + +The default 'handler.action' if none is explicitly specified is as it +always has been, to simply update the set of values associated with an +entry. Some applications, however, may want to perform additional +actions at that point, such as generate another event, or compare and +save a maximum. + +The supported handlers and actions are listed below, and each is +described in more detail in the following paragraphs, in the context +of descriptions of some common and useful handler.action combinations. + +The available handlers are: + + - onmatch(matching.event) - invoke action on any addition or update + - onmax(var) - invoke action if var exceeds current max + - onchange(var) - invoke action if var changes + +The available actions are: + + - trace(,param list) - generate synthetic event + - save(field,...) - save current event fields + - snapshot() - snapshot the trace buffer + +The following commonly-used handler.action pairs are available: + + - onmatch(matching.event).trace(,param list) + + The 'onmatch(matching.event).trace(,param + list)' hist trigger action is invoked whenever an event matches + and the histogram entry would be added or updated. It causes the + named synthetic event to be generated with the values given in the + 'param list'. The result is the generation of a synthetic event + that consists of the values contained in those variables at the + time the invoking event was hit. For example, if the synthetic + event name is 'wakeup_latency', a wakeup_latency event is + generated using onmatch(event).trace(wakeup_latency,arg1,arg2). + + There is also an equivalent alternative form available for + generating synthetic events. In this form, the synthetic event + name is used as if it were a function name. For example, using + the 'wakeup_latency' synthetic event name again, the + wakeup_latency event would be generated by invoking it as if it + were a function call, with the event field values passed in as + arguments: onmatch(event).wakeup_latency(arg1,arg2). The syntax + for this form is: + + onmatch(matching.event).(param list) + + In either case, the 'param list' consists of one or more + parameters which may be either variables or fields defined on + either the 'matching.event' or the target event. The variables or + fields specified in the param list may be either fully-qualified + or unqualified. If a variable is specified as unqualified, it + must be unique between the two events. A field name used as a + param can be unqualified if it refers to the target event, but + must be fully qualified if it refers to the matching event. A + fully-qualified name is of the form 'system.event_name.$var_name' + or 'system.event_name.field'. + + The 'matching.event' specification is simply the fully qualified + event name of the event that matches the target event for the + onmatch() functionality, in the form 'system.event_name'. Histogram + keys of both events are compared to find if events match. In case + multiple histogram keys are used, they all must match in the specified + order. + + Finally, the number and type of variables/fields in the 'param + list' must match the number and types of the fields in the + synthetic event being generated. + + As an example the below defines a simple synthetic event and uses + a variable defined on the sched_wakeup_new event as a parameter + when invoking the synthetic event. Here we define the synthetic + event:: + + # echo 'wakeup_new_test pid_t pid' >> \ + /sys/kernel/tracing/synthetic_events + + # cat /sys/kernel/tracing/synthetic_events + wakeup_new_test pid_t pid + + The following hist trigger both defines the missing testpid + variable and specifies an onmatch() action that generates a + wakeup_new_test synthetic event whenever a sched_wakeup_new event + occurs, which because of the 'if comm == "cyclictest"' filter only + happens when the executable is cyclictest:: + + # echo 'hist:keys=$testpid:testpid=pid:onmatch(sched.sched_wakeup_new).\ + wakeup_new_test($testpid) if comm=="cyclictest"' >> \ + /sys/kernel/tracing/events/sched/sched_wakeup_new/trigger + + Or, equivalently, using the 'trace' keyword syntax:: + + # echo 'hist:keys=$testpid:testpid=pid:onmatch(sched.sched_wakeup_new).\ + trace(wakeup_new_test,$testpid) if comm=="cyclictest"' >> \ + /sys/kernel/tracing/events/sched/sched_wakeup_new/trigger + + Creating and displaying a histogram based on those events is now + just a matter of using the fields and new synthetic event in the + tracing/events/synthetic directory, as usual:: + + # echo 'hist:keys=pid:sort=pid' >> \ + /sys/kernel/tracing/events/synthetic/wakeup_new_test/trigger + + Running 'cyclictest' should cause wakeup_new events to generate + wakeup_new_test synthetic events which should result in histogram + output in the wakeup_new_test event's hist file:: + + # cat /sys/kernel/tracing/events/synthetic/wakeup_new_test/hist + + A more typical usage would be to use two events to calculate a + latency. The following example uses a set of hist triggers to + produce a 'wakeup_latency' histogram. + + First, we define a 'wakeup_latency' synthetic event:: + + # echo 'wakeup_latency u64 lat; pid_t pid; int prio' >> \ + /sys/kernel/tracing/synthetic_events + + Next, we specify that whenever we see a sched_waking event for a + cyclictest thread, save the timestamp in a 'ts0' variable:: + + # echo 'hist:keys=$saved_pid:saved_pid=pid:ts0=common_timestamp.usecs \ + if comm=="cyclictest"' >> \ + /sys/kernel/tracing/events/sched/sched_waking/trigger + + Then, when the corresponding thread is actually scheduled onto the + CPU by a sched_switch event (saved_pid matches next_pid), calculate + the latency and use that along with another variable and an event field + to generate a wakeup_latency synthetic event:: + + # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:\ + onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,\ + $saved_pid,next_prio) if next_comm=="cyclictest"' >> \ + /sys/kernel/tracing/events/sched/sched_switch/trigger + + We also need to create a histogram on the wakeup_latency synthetic + event in order to aggregate the generated synthetic event data:: + + # echo 'hist:keys=pid,prio,lat:sort=pid,lat' >> \ + /sys/kernel/tracing/events/synthetic/wakeup_latency/trigger + + Finally, once we've run cyclictest to actually generate some + events, we can see the output by looking at the wakeup_latency + synthetic event's hist file:: + + # cat /sys/kernel/tracing/events/synthetic/wakeup_latency/hist + + - onmax(var).save(field,.. .) + + The 'onmax(var).save(field,...)' hist trigger action is invoked + whenever the value of 'var' associated with a histogram entry + exceeds the current maximum contained in that variable. + + The end result is that the trace event fields specified as the + onmax.save() params will be saved if 'var' exceeds the current + maximum for that hist trigger entry. This allows context from the + event that exhibited the new maximum to be saved for later + reference. When the histogram is displayed, additional fields + displaying the saved values will be printed. + + As an example the below defines a couple of hist triggers, one for + sched_waking and another for sched_switch, keyed on pid. Whenever + a sched_waking occurs, the timestamp is saved in the entry + corresponding to the current pid, and when the scheduler switches + back to that pid, the timestamp difference is calculated. If the + resulting latency, stored in wakeup_lat, exceeds the current + maximum latency, the values specified in the save() fields are + recorded:: + + # echo 'hist:keys=pid:ts0=common_timestamp.usecs \ + if comm=="cyclictest"' >> \ + /sys/kernel/tracing/events/sched/sched_waking/trigger + + # echo 'hist:keys=next_pid:\ + wakeup_lat=common_timestamp.usecs-$ts0:\ + onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm) \ + if next_comm=="cyclictest"' >> \ + /sys/kernel/tracing/events/sched/sched_switch/trigger + + When the histogram is displayed, the max value and the saved + values corresponding to the max are displayed following the rest + of the fields:: + + # cat /sys/kernel/tracing/events/sched/sched_switch/hist + { next_pid: 2255 } hitcount: 239 + common_timestamp-ts0: 0 + max: 27 + next_comm: cyclictest + prev_pid: 0 prev_prio: 120 prev_comm: swapper/1 + + { next_pid: 2256 } hitcount: 2355 + common_timestamp-ts0: 0 + max: 49 next_comm: cyclictest + prev_pid: 0 prev_prio: 120 prev_comm: swapper/0 + + Totals: + Hits: 12970 + Entries: 2 + Dropped: 0 + + - onmax(var).snapshot() + + The 'onmax(var).snapshot()' hist trigger action is invoked + whenever the value of 'var' associated with a histogram entry + exceeds the current maximum contained in that variable. + + The end result is that a global snapshot of the trace buffer will + be saved in the tracing/snapshot file if 'var' exceeds the current + maximum for any hist trigger entry. + + Note that in this case the maximum is a global maximum for the + current trace instance, which is the maximum across all buckets of + the histogram. The key of the specific trace event that caused + the global maximum and the global maximum itself are displayed, + along with a message stating that a snapshot has been taken and + where to find it. The user can use the key information displayed + to locate the corresponding bucket in the histogram for even more + detail. + + As an example the below defines a couple of hist triggers, one for + sched_waking and another for sched_switch, keyed on pid. Whenever + a sched_waking event occurs, the timestamp is saved in the entry + corresponding to the current pid, and when the scheduler switches + back to that pid, the timestamp difference is calculated. If the + resulting latency, stored in wakeup_lat, exceeds the current + maximum latency, a snapshot is taken. As part of the setup, all + the scheduler events are also enabled, which are the events that + will show up in the snapshot when it is taken at some point:: + + # echo 1 > /sys/kernel/tracing/events/sched/enable + + # echo 'hist:keys=pid:ts0=common_timestamp.usecs \ + if comm=="cyclictest"' >> \ + /sys/kernel/tracing/events/sched/sched_waking/trigger + + # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0: \ + onmax($wakeup_lat).save(next_prio,next_comm,prev_pid,prev_prio, \ + prev_comm):onmax($wakeup_lat).snapshot() \ + if next_comm=="cyclictest"' >> \ + /sys/kernel/tracing/events/sched/sched_switch/trigger + + When the histogram is displayed, for each bucket the max value + and the saved values corresponding to the max are displayed + following the rest of the fields. + + If a snapshot was taken, there is also a message indicating that, + along with the value and event that triggered the global maximum:: + + # cat /sys/kernel/tracing/events/sched/sched_switch/hist + { next_pid: 2101 } hitcount: 200 + max: 52 next_prio: 120 next_comm: cyclictest \ + prev_pid: 0 prev_prio: 120 prev_comm: swapper/6 + + { next_pid: 2103 } hitcount: 1326 + max: 572 next_prio: 19 next_comm: cyclictest \ + prev_pid: 0 prev_prio: 120 prev_comm: swapper/1 + + { next_pid: 2102 } hitcount: 1982 \ + max: 74 next_prio: 19 next_comm: cyclictest \ + prev_pid: 0 prev_prio: 120 prev_comm: swapper/5 + + Snapshot taken (see tracing/snapshot). Details: + triggering value { onmax($wakeup_lat) }: 572 \ + triggered by event with key: { next_pid: 2103 } + + Totals: + Hits: 3508 + Entries: 3 + Dropped: 0 + + In the above case, the event that triggered the global maximum has + the key with next_pid == 2103. If you look at the bucket that has + 2103 as the key, you'll find the additional values save()'d along + with the local maximum for that bucket, which should be the same + as the global maximum (since that was the same value that + triggered the global snapshot). + + And finally, looking at the snapshot data should show at or near + the end the event that triggered the snapshot (in this case you + can verify the timestamps between the sched_waking and + sched_switch events, which should match the time displayed in the + global maximum):: + + # cat /sys/kernel/tracing/snapshot + + <...>-2103 [005] d..3 309.873125: sched_switch: prev_comm=cyclictest prev_pid=2103 prev_prio=19 prev_state=D ==> next_comm=swapper/5 next_pid=0 next_prio=120 + -0 [005] d.h3 309.873611: sched_waking: comm=cyclictest pid=2102 prio=19 target_cpu=005 + -0 [005] dNh4 309.873613: sched_wakeup: comm=cyclictest pid=2102 prio=19 target_cpu=005 + -0 [005] d..3 309.873616: sched_switch: prev_comm=swapper/5 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=cyclictest next_pid=2102 next_prio=19 + <...>-2102 [005] d..3 309.873625: sched_switch: prev_comm=cyclictest prev_pid=2102 prev_prio=19 prev_state=D ==> next_comm=swapper/5 next_pid=0 next_prio=120 + -0 [005] d.h3 309.874624: sched_waking: comm=cyclictest pid=2102 prio=19 target_cpu=005 + -0 [005] dNh4 309.874626: sched_wakeup: comm=cyclictest pid=2102 prio=19 target_cpu=005 + -0 [005] dNh3 309.874628: sched_waking: comm=cyclictest pid=2103 prio=19 target_cpu=005 + -0 [005] dNh4 309.874630: sched_wakeup: comm=cyclictest pid=2103 prio=19 target_cpu=005 + -0 [005] d..3 309.874633: sched_switch: prev_comm=swapper/5 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=cyclictest next_pid=2102 next_prio=19 + -0 [004] d.h3 309.874757: sched_waking: comm=gnome-terminal- pid=1699 prio=120 target_cpu=004 + -0 [004] dNh4 309.874762: sched_wakeup: comm=gnome-terminal- pid=1699 prio=120 target_cpu=004 + -0 [004] d..3 309.874766: sched_switch: prev_comm=swapper/4 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=gnome-terminal- next_pid=1699 next_prio=120 + gnome-terminal--1699 [004] d.h2 309.874941: sched_stat_runtime: comm=gnome-terminal- pid=1699 runtime=180706 [ns] vruntime=1126870572 [ns] + -0 [003] d.s4 309.874956: sched_waking: comm=rcu_sched pid=9 prio=120 target_cpu=007 + -0 [003] d.s5 309.874960: sched_wake_idle_without_ipi: cpu=7 + -0 [003] d.s5 309.874961: sched_wakeup: comm=rcu_sched pid=9 prio=120 target_cpu=007 + -0 [007] d..3 309.874963: sched_switch: prev_comm=swapper/7 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=rcu_sched next_pid=9 next_prio=120 + rcu_sched-9 [007] d..3 309.874973: sched_stat_runtime: comm=rcu_sched pid=9 runtime=13646 [ns] vruntime=22531430286 [ns] + rcu_sched-9 [007] d..3 309.874978: sched_switch: prev_comm=rcu_sched prev_pid=9 prev_prio=120 prev_state=R+ ==> next_comm=swapper/7 next_pid=0 next_prio=120 + <...>-2102 [005] d..4 309.874994: sched_migrate_task: comm=cyclictest pid=2103 prio=19 orig_cpu=5 dest_cpu=1 + <...>-2102 [005] d..4 309.875185: sched_wake_idle_without_ipi: cpu=1 + -0 [001] d..3 309.875200: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=cyclictest next_pid=2103 next_prio=19 + + - onchange(var).save(field,.. .) + + The 'onchange(var).save(field,...)' hist trigger action is invoked + whenever the value of 'var' associated with a histogram entry + changes. + + The end result is that the trace event fields specified as the + onchange.save() params will be saved if 'var' changes for that + hist trigger entry. This allows context from the event that + changed the value to be saved for later reference. When the + histogram is displayed, additional fields displaying the saved + values will be printed. + + - onchange(var).snapshot() + + The 'onchange(var).snapshot()' hist trigger action is invoked + whenever the value of 'var' associated with a histogram entry + changes. + + The end result is that a global snapshot of the trace buffer will + be saved in the tracing/snapshot file if 'var' changes for any + hist trigger entry. + + Note that in this case the changed value is a global variable + associated with current trace instance. The key of the specific + trace event that caused the value to change and the global value + itself are displayed, along with a message stating that a snapshot + has been taken and where to find it. The user can use the key + information displayed to locate the corresponding bucket in the + histogram for even more detail. + + As an example the below defines a hist trigger on the tcp_probe + event, keyed on dport. Whenever a tcp_probe event occurs, the + cwnd field is checked against the current value stored in the + $cwnd variable. If the value has changed, a snapshot is taken. + As part of the setup, all the scheduler and tcp events are also + enabled, which are the events that will show up in the snapshot + when it is taken at some point:: + + # echo 1 > /sys/kernel/tracing/events/sched/enable + # echo 1 > /sys/kernel/tracing/events/tcp/enable + + # echo 'hist:keys=dport:cwnd=snd_cwnd: \ + onchange($cwnd).save(snd_wnd,srtt,rcv_wnd): \ + onchange($cwnd).snapshot()' >> \ + /sys/kernel/tracing/events/tcp/tcp_probe/trigger + + When the histogram is displayed, for each bucket the tracked value + and the saved values corresponding to that value are displayed + following the rest of the fields. + + If a snapshot was taken, there is also a message indicating that, + along with the value and event that triggered the snapshot:: + + # cat /sys/kernel/tracing/events/tcp/tcp_probe/hist + + { dport: 1521 } hitcount: 8 + changed: 10 snd_wnd: 35456 srtt: 154262 rcv_wnd: 42112 + + { dport: 80 } hitcount: 23 + changed: 10 snd_wnd: 28960 srtt: 19604 rcv_wnd: 29312 + + { dport: 9001 } hitcount: 172 + changed: 10 snd_wnd: 48384 srtt: 260444 rcv_wnd: 55168 + + { dport: 443 } hitcount: 211 + changed: 10 snd_wnd: 26960 srtt: 17379 rcv_wnd: 28800 + + Snapshot taken (see tracing/snapshot). Details: + + triggering value { onchange($cwnd) }: 10 + triggered by event with key: { dport: 80 } + + Totals: + Hits: 414 + Entries: 4 + Dropped: 0 + + In the above case, the event that triggered the snapshot has the + key with dport == 80. If you look at the bucket that has 80 as + the key, you'll find the additional values save()'d along with the + changed value for that bucket, which should be the same as the + global changed value (since that was the same value that triggered + the global snapshot). + + And finally, looking at the snapshot data should show at or near + the end the event that triggered the snapshot:: + + # cat /sys/kernel/tracing/snapshot + + gnome-shell-1261 [006] dN.3 49.823113: sched_stat_runtime: comm=gnome-shell pid=1261 runtime=49347 [ns] vruntime=1835730389 [ns] + kworker/u16:4-773 [003] d..3 49.823114: sched_switch: prev_comm=kworker/u16:4 prev_pid=773 prev_prio=120 prev_state=R+ ==> next_comm=kworker/3:2 next_pid=135 next_prio=120 + gnome-shell-1261 [006] d..3 49.823114: sched_switch: prev_comm=gnome-shell prev_pid=1261 prev_prio=120 prev_state=R+ ==> next_comm=kworker/6:2 next_pid=387 next_prio=120 + kworker/3:2-135 [003] d..3 49.823118: sched_stat_runtime: comm=kworker/3:2 pid=135 runtime=5339 [ns] vruntime=17815800388 [ns] + kworker/6:2-387 [006] d..3 49.823120: sched_stat_runtime: comm=kworker/6:2 pid=387 runtime=9594 [ns] vruntime=14589605367 [ns] + kworker/6:2-387 [006] d..3 49.823122: sched_switch: prev_comm=kworker/6:2 prev_pid=387 prev_prio=120 prev_state=R+ ==> next_comm=gnome-shell next_pid=1261 next_prio=120 + kworker/3:2-135 [003] d..3 49.823123: sched_switch: prev_comm=kworker/3:2 prev_pid=135 prev_prio=120 prev_state=T ==> next_comm=swapper/3 next_pid=0 next_prio=120 + -0 [004] ..s7 49.823798: tcp_probe: src=10.0.0.10:54326 dest=23.215.104.193:80 mark=0x0 length=32 snd_nxt=0xe3ae2ff5 snd_una=0xe3ae2ecd snd_cwnd=10 ssthresh=2147483647 snd_wnd=28960 srtt=19604 rcv_wnd=29312 + +3. User space creating a trigger +-------------------------------- + +Writing into /sys/kernel/tracing/trace_marker writes into the ftrace +ring buffer. This can also act like an event, by writing into the trigger +file located in /sys/kernel/tracing/events/ftrace/print/ + +Modifying cyclictest to write into the trace_marker file before it sleeps +and after it wakes up, something like this:: + + static void traceputs(char *str) + { + /* tracemark_fd is the trace_marker file descriptor */ + if (tracemark_fd < 0) + return; + /* write the tracemark message */ + write(tracemark_fd, str, strlen(str)); + } + +And later add something like:: + + traceputs("start"); + clock_nanosleep(...); + traceputs("end"); + +We can make a histogram from this:: + + # cd /sys/kernel/tracing + # echo 'latency u64 lat' > synthetic_events + # echo 'hist:keys=common_pid:ts0=common_timestamp.usecs if buf == "start"' > events/ftrace/print/trigger + # echo 'hist:keys=common_pid:lat=common_timestamp.usecs-$ts0:onmatch(ftrace.print).latency($lat) if buf == "end"' >> events/ftrace/print/trigger + # echo 'hist:keys=lat,common_pid:sort=lat' > events/synthetic/latency/trigger + +The above created a synthetic event called "latency" and two histograms +against the trace_marker, one gets triggered when "start" is written into the +trace_marker file and the other when "end" is written. If the pids match, then +it will call the "latency" synthetic event with the calculated latency as its +parameter. Finally, a histogram is added to the latency synthetic event to +record the calculated latency along with the pid. + +Now running cyclictest with:: + + # ./cyclictest -p80 -d0 -i250 -n -a -t --tracemark -b 1000 + + -p80 : run threads at priority 80 + -d0 : have all threads run at the same interval + -i250 : start the interval at 250 microseconds (all threads will do this) + -n : sleep with nanosleep + -a : affine all threads to a separate CPU + -t : one thread per available CPU + --tracemark : enable trace mark writing + -b 1000 : stop if any latency is greater than 1000 microseconds + +Note, the -b 1000 is used just to make --tracemark available. + +Then we can see the histogram created by this with:: + + # cat events/synthetic/latency/hist + # event histogram + # + # trigger info: hist:keys=lat,common_pid:vals=hitcount:sort=lat:size=2048 [active] + # + + { lat: 107, common_pid: 2039 } hitcount: 1 + { lat: 122, common_pid: 2041 } hitcount: 1 + { lat: 166, common_pid: 2039 } hitcount: 1 + { lat: 174, common_pid: 2039 } hitcount: 1 + { lat: 194, common_pid: 2041 } hitcount: 1 + { lat: 196, common_pid: 2036 } hitcount: 1 + { lat: 197, common_pid: 2038 } hitcount: 1 + { lat: 198, common_pid: 2039 } hitcount: 1 + { lat: 199, common_pid: 2039 } hitcount: 1 + { lat: 200, common_pid: 2041 } hitcount: 1 + { lat: 201, common_pid: 2039 } hitcount: 2 + { lat: 202, common_pid: 2038 } hitcount: 1 + { lat: 202, common_pid: 2043 } hitcount: 1 + { lat: 203, common_pid: 2039 } hitcount: 1 + { lat: 203, common_pid: 2036 } hitcount: 1 + { lat: 203, common_pid: 2041 } hitcount: 1 + { lat: 206, common_pid: 2038 } hitcount: 2 + { lat: 207, common_pid: 2039 } hitcount: 1 + { lat: 207, common_pid: 2036 } hitcount: 1 + { lat: 208, common_pid: 2040 } hitcount: 1 + { lat: 209, common_pid: 2043 } hitcount: 1 + { lat: 210, common_pid: 2039 } hitcount: 1 + { lat: 211, common_pid: 2039 } hitcount: 4 + { lat: 212, common_pid: 2043 } hitcount: 1 + { lat: 212, common_pid: 2039 } hitcount: 2 + { lat: 213, common_pid: 2039 } hitcount: 1 + { lat: 214, common_pid: 2038 } hitcount: 1 + { lat: 214, common_pid: 2039 } hitcount: 2 + { lat: 214, common_pid: 2042 } hitcount: 1 + { lat: 215, common_pid: 2039 } hitcount: 1 + { lat: 217, common_pid: 2036 } hitcount: 1 + { lat: 217, common_pid: 2040 } hitcount: 1 + { lat: 217, common_pid: 2039 } hitcount: 1 + { lat: 218, common_pid: 2039 } hitcount: 6 + { lat: 219, common_pid: 2039 } hitcount: 9 + { lat: 220, common_pid: 2039 } hitcount: 11 + { lat: 221, common_pid: 2039 } hitcount: 5 + { lat: 221, common_pid: 2042 } hitcount: 1 + { lat: 222, common_pid: 2039 } hitcount: 7 + { lat: 223, common_pid: 2036 } hitcount: 1 + { lat: 223, common_pid: 2039 } hitcount: 3 + { lat: 224, common_pid: 2039 } hitcount: 4 + { lat: 224, common_pid: 2037 } hitcount: 1 + { lat: 224, common_pid: 2036 } hitcount: 2 + { lat: 225, common_pid: 2039 } hitcount: 5 + { lat: 225, common_pid: 2042 } hitcount: 1 + { lat: 226, common_pid: 2039 } hitcount: 7 + { lat: 226, common_pid: 2036 } hitcount: 4 + { lat: 227, common_pid: 2039 } hitcount: 6 + { lat: 227, common_pid: 2036 } hitcount: 12 + { lat: 227, common_pid: 2043 } hitcount: 1 + { lat: 228, common_pid: 2039 } hitcount: 7 + { lat: 228, common_pid: 2036 } hitcount: 14 + { lat: 229, common_pid: 2039 } hitcount: 9 + { lat: 229, common_pid: 2036 } hitcount: 8 + { lat: 229, common_pid: 2038 } hitcount: 1 + { lat: 230, common_pid: 2039 } hitcount: 11 + { lat: 230, common_pid: 2036 } hitcount: 6 + { lat: 230, common_pid: 2043 } hitcount: 1 + { lat: 230, common_pid: 2042 } hitcount: 2 + { lat: 231, common_pid: 2041 } hitcount: 1 + { lat: 231, common_pid: 2036 } hitcount: 6 + { lat: 231, common_pid: 2043 } hitcount: 1 + { lat: 231, common_pid: 2039 } hitcount: 8 + { lat: 232, common_pid: 2037 } hitcount: 1 + { lat: 232, common_pid: 2039 } hitcount: 6 + { lat: 232, common_pid: 2040 } hitcount: 2 + { lat: 232, common_pid: 2036 } hitcount: 5 + { lat: 232, common_pid: 2043 } hitcount: 1 + { lat: 233, common_pid: 2036 } hitcount: 5 + { lat: 233, common_pid: 2039 } hitcount: 11 + { lat: 234, common_pid: 2039 } hitcount: 4 + { lat: 234, common_pid: 2038 } hitcount: 2 + { lat: 234, common_pid: 2043 } hitcount: 2 + { lat: 234, common_pid: 2036 } hitcount: 11 + { lat: 234, common_pid: 2040 } hitcount: 1 + { lat: 235, common_pid: 2037 } hitcount: 2 + { lat: 235, common_pid: 2036 } hitcount: 8 + { lat: 235, common_pid: 2043 } hitcount: 2 + { lat: 235, common_pid: 2039 } hitcount: 5 + { lat: 235, common_pid: 2042 } hitcount: 2 + { lat: 235, common_pid: 2040 } hitcount: 4 + { lat: 235, common_pid: 2041 } hitcount: 1 + { lat: 236, common_pid: 2036 } hitcount: 7 + { lat: 236, common_pid: 2037 } hitcount: 1 + { lat: 236, common_pid: 2041 } hitcount: 5 + { lat: 236, common_pid: 2039 } hitcount: 3 + { lat: 236, common_pid: 2043 } hitcount: 9 + { lat: 236, common_pid: 2040 } hitcount: 7 + { lat: 237, common_pid: 2037 } hitcount: 1 + { lat: 237, common_pid: 2040 } hitcount: 1 + { lat: 237, common_pid: 2036 } hitcount: 9 + { lat: 237, common_pid: 2039 } hitcount: 3 + { lat: 237, common_pid: 2043 } hitcount: 8 + { lat: 237, common_pid: 2042 } hitcount: 2 + { lat: 237, common_pid: 2041 } hitcount: 2 + { lat: 238, common_pid: 2043 } hitcount: 10 + { lat: 238, common_pid: 2040 } hitcount: 1 + { lat: 238, common_pid: 2037 } hitcount: 9 + { lat: 238, common_pid: 2038 } hitcount: 1 + { lat: 238, common_pid: 2039 } hitcount: 1 + { lat: 238, common_pid: 2042 } hitcount: 3 + { lat: 238, common_pid: 2036 } hitcount: 7 + { lat: 239, common_pid: 2041 } hitcount: 1 + { lat: 239, common_pid: 2043 } hitcount: 11 + { lat: 239, common_pid: 2037 } hitcount: 11 + { lat: 239, common_pid: 2038 } hitcount: 6 + { lat: 239, common_pid: 2036 } hitcount: 7 + { lat: 239, common_pid: 2040 } hitcount: 1 + { lat: 239, common_pid: 2042 } hitcount: 9 + { lat: 240, common_pid: 2037 } hitcount: 29 + { lat: 240, common_pid: 2043 } hitcount: 15 + { lat: 240, common_pid: 2040 } hitcount: 44 + { lat: 240, common_pid: 2039 } hitcount: 1 + { lat: 240, common_pid: 2041 } hitcount: 2 + { lat: 240, common_pid: 2038 } hitcount: 1 + { lat: 240, common_pid: 2036 } hitcount: 10 + { lat: 240, common_pid: 2042 } hitcount: 13 + { lat: 241, common_pid: 2036 } hitcount: 21 + { lat: 241, common_pid: 2041 } hitcount: 36 + { lat: 241, common_pid: 2037 } hitcount: 34 + { lat: 241, common_pid: 2042 } hitcount: 14 + { lat: 241, common_pid: 2040 } hitcount: 94 + { lat: 241, common_pid: 2039 } hitcount: 12 + { lat: 241, common_pid: 2038 } hitcount: 2 + { lat: 241, common_pid: 2043 } hitcount: 28 + { lat: 242, common_pid: 2040 } hitcount: 109 + { lat: 242, common_pid: 2041 } hitcount: 506 + { lat: 242, common_pid: 2039 } hitcount: 155 + { lat: 242, common_pid: 2042 } hitcount: 21 + { lat: 242, common_pid: 2037 } hitcount: 52 + { lat: 242, common_pid: 2043 } hitcount: 21 + { lat: 242, common_pid: 2036 } hitcount: 16 + { lat: 242, common_pid: 2038 } hitcount: 156 + { lat: 243, common_pid: 2037 } hitcount: 46 + { lat: 243, common_pid: 2039 } hitcount: 40 + { lat: 243, common_pid: 2042 } hitcount: 119 + { lat: 243, common_pid: 2041 } hitcount: 611 + { lat: 243, common_pid: 2036 } hitcount: 69 + { lat: 243, common_pid: 2038 } hitcount: 784 + { lat: 243, common_pid: 2040 } hitcount: 323 + { lat: 243, common_pid: 2043 } hitcount: 14 + { lat: 244, common_pid: 2043 } hitcount: 35 + { lat: 244, common_pid: 2042 } hitcount: 305 + { lat: 244, common_pid: 2039 } hitcount: 8 + { lat: 244, common_pid: 2040 } hitcount: 4515 + { lat: 244, common_pid: 2038 } hitcount: 371 + { lat: 244, common_pid: 2037 } hitcount: 31 + { lat: 244, common_pid: 2036 } hitcount: 114 + { lat: 244, common_pid: 2041 } hitcount: 3396 + { lat: 245, common_pid: 2036 } hitcount: 700 + { lat: 245, common_pid: 2041 } hitcount: 2772 + { lat: 245, common_pid: 2037 } hitcount: 268 + { lat: 245, common_pid: 2039 } hitcount: 472 + { lat: 245, common_pid: 2038 } hitcount: 2758 + { lat: 245, common_pid: 2042 } hitcount: 3833 + { lat: 245, common_pid: 2040 } hitcount: 3105 + { lat: 245, common_pid: 2043 } hitcount: 645 + { lat: 246, common_pid: 2038 } hitcount: 3451 + { lat: 246, common_pid: 2041 } hitcount: 142 + { lat: 246, common_pid: 2037 } hitcount: 5101 + { lat: 246, common_pid: 2040 } hitcount: 68 + { lat: 246, common_pid: 2043 } hitcount: 5099 + { lat: 246, common_pid: 2039 } hitcount: 5608 + { lat: 246, common_pid: 2042 } hitcount: 3723 + { lat: 246, common_pid: 2036 } hitcount: 4738 + { lat: 247, common_pid: 2042 } hitcount: 312 + { lat: 247, common_pid: 2043 } hitcount: 2385 + { lat: 247, common_pid: 2041 } hitcount: 452 + { lat: 247, common_pid: 2038 } hitcount: 792 + { lat: 247, common_pid: 2040 } hitcount: 78 + { lat: 247, common_pid: 2036 } hitcount: 2375 + { lat: 247, common_pid: 2039 } hitcount: 1834 + { lat: 247, common_pid: 2037 } hitcount: 2655 + { lat: 248, common_pid: 2037 } hitcount: 36 + { lat: 248, common_pid: 2042 } hitcount: 11 + { lat: 248, common_pid: 2038 } hitcount: 122 + { lat: 248, common_pid: 2036 } hitcount: 135 + { lat: 248, common_pid: 2039 } hitcount: 26 + { lat: 248, common_pid: 2041 } hitcount: 503 + { lat: 248, common_pid: 2043 } hitcount: 66 + { lat: 248, common_pid: 2040 } hitcount: 46 + { lat: 249, common_pid: 2037 } hitcount: 29 + { lat: 249, common_pid: 2038 } hitcount: 1 + { lat: 249, common_pid: 2043 } hitcount: 29 + { lat: 249, common_pid: 2039 } hitcount: 8 + { lat: 249, common_pid: 2042 } hitcount: 56 + { lat: 249, common_pid: 2040 } hitcount: 27 + { lat: 249, common_pid: 2041 } hitcount: 11 + { lat: 249, common_pid: 2036 } hitcount: 27 + { lat: 250, common_pid: 2038 } hitcount: 1 + { lat: 250, common_pid: 2036 } hitcount: 30 + { lat: 250, common_pid: 2040 } hitcount: 19 + { lat: 250, common_pid: 2043 } hitcount: 22 + { lat: 250, common_pid: 2042 } hitcount: 20 + { lat: 250, common_pid: 2041 } hitcount: 1 + { lat: 250, common_pid: 2039 } hitcount: 6 + { lat: 250, common_pid: 2037 } hitcount: 48 + { lat: 251, common_pid: 2037 } hitcount: 43 + { lat: 251, common_pid: 2039 } hitcount: 1 + { lat: 251, common_pid: 2036 } hitcount: 12 + { lat: 251, common_pid: 2042 } hitcount: 2 + { lat: 251, common_pid: 2041 } hitcount: 1 + { lat: 251, common_pid: 2043 } hitcount: 15 + { lat: 251, common_pid: 2040 } hitcount: 3 + { lat: 252, common_pid: 2040 } hitcount: 1 + { lat: 252, common_pid: 2036 } hitcount: 12 + { lat: 252, common_pid: 2037 } hitcount: 21 + { lat: 252, common_pid: 2043 } hitcount: 14 + { lat: 253, common_pid: 2037 } hitcount: 21 + { lat: 253, common_pid: 2039 } hitcount: 2 + { lat: 253, common_pid: 2036 } hitcount: 9 + { lat: 253, common_pid: 2043 } hitcount: 6 + { lat: 253, common_pid: 2040 } hitcount: 1 + { lat: 254, common_pid: 2036 } hitcount: 8 + { lat: 254, common_pid: 2043 } hitcount: 3 + { lat: 254, common_pid: 2041 } hitcount: 1 + { lat: 254, common_pid: 2042 } hitcount: 1 + { lat: 254, common_pid: 2039 } hitcount: 1 + { lat: 254, common_pid: 2037 } hitcount: 12 + { lat: 255, common_pid: 2043 } hitcount: 1 + { lat: 255, common_pid: 2037 } hitcount: 2 + { lat: 255, common_pid: 2036 } hitcount: 2 + { lat: 255, common_pid: 2039 } hitcount: 8 + { lat: 256, common_pid: 2043 } hitcount: 1 + { lat: 256, common_pid: 2036 } hitcount: 4 + { lat: 256, common_pid: 2039 } hitcount: 6 + { lat: 257, common_pid: 2039 } hitcount: 5 + { lat: 257, common_pid: 2036 } hitcount: 4 + { lat: 258, common_pid: 2039 } hitcount: 5 + { lat: 258, common_pid: 2036 } hitcount: 2 + { lat: 259, common_pid: 2036 } hitcount: 7 + { lat: 259, common_pid: 2039 } hitcount: 7 + { lat: 260, common_pid: 2036 } hitcount: 8 + { lat: 260, common_pid: 2039 } hitcount: 6 + { lat: 261, common_pid: 2036 } hitcount: 5 + { lat: 261, common_pid: 2039 } hitcount: 7 + { lat: 262, common_pid: 2039 } hitcount: 5 + { lat: 262, common_pid: 2036 } hitcount: 5 + { lat: 263, common_pid: 2039 } hitcount: 7 + { lat: 263, common_pid: 2036 } hitcount: 7 + { lat: 264, common_pid: 2039 } hitcount: 9 + { lat: 264, common_pid: 2036 } hitcount: 9 + { lat: 265, common_pid: 2036 } hitcount: 5 + { lat: 265, common_pid: 2039 } hitcount: 1 + { lat: 266, common_pid: 2036 } hitcount: 1 + { lat: 266, common_pid: 2039 } hitcount: 3 + { lat: 267, common_pid: 2036 } hitcount: 1 + { lat: 267, common_pid: 2039 } hitcount: 3 + { lat: 268, common_pid: 2036 } hitcount: 1 + { lat: 268, common_pid: 2039 } hitcount: 6 + { lat: 269, common_pid: 2036 } hitcount: 1 + { lat: 269, common_pid: 2043 } hitcount: 1 + { lat: 269, common_pid: 2039 } hitcount: 2 + { lat: 270, common_pid: 2040 } hitcount: 1 + { lat: 270, common_pid: 2039 } hitcount: 6 + { lat: 271, common_pid: 2041 } hitcount: 1 + { lat: 271, common_pid: 2039 } hitcount: 5 + { lat: 272, common_pid: 2039 } hitcount: 10 + { lat: 273, common_pid: 2039 } hitcount: 8 + { lat: 274, common_pid: 2039 } hitcount: 2 + { lat: 275, common_pid: 2039 } hitcount: 1 + { lat: 276, common_pid: 2039 } hitcount: 2 + { lat: 276, common_pid: 2037 } hitcount: 1 + { lat: 276, common_pid: 2038 } hitcount: 1 + { lat: 277, common_pid: 2039 } hitcount: 1 + { lat: 277, common_pid: 2042 } hitcount: 1 + { lat: 278, common_pid: 2039 } hitcount: 1 + { lat: 279, common_pid: 2039 } hitcount: 4 + { lat: 279, common_pid: 2043 } hitcount: 1 + { lat: 280, common_pid: 2039 } hitcount: 3 + { lat: 283, common_pid: 2036 } hitcount: 2 + { lat: 284, common_pid: 2039 } hitcount: 1 + { lat: 284, common_pid: 2043 } hitcount: 1 + { lat: 288, common_pid: 2039 } hitcount: 1 + { lat: 289, common_pid: 2039 } hitcount: 1 + { lat: 300, common_pid: 2039 } hitcount: 1 + { lat: 384, common_pid: 2039 } hitcount: 1 + + Totals: + Hits: 67625 + Entries: 278 + Dropped: 0 + +Note, the writes are around the sleep, so ideally they will all be of 250 +microseconds. If you are wondering how there are several that are under +250 microseconds, that is because the way cyclictest works, is if one +iteration comes in late, the next one will set the timer to wake up less that +250. That is, if an iteration came in 50 microseconds late, the next wake up +will be at 200 microseconds. + +But this could easily be done in userspace. To make this even more +interesting, we can mix the histogram between events that happened in the +kernel with trace_marker:: + + # cd /sys/kernel/tracing + # echo 'latency u64 lat' > synthetic_events + # echo 'hist:keys=pid:ts0=common_timestamp.usecs' > events/sched/sched_waking/trigger + # echo 'hist:keys=common_pid:lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_waking).latency($lat) if buf == "end"' > events/ftrace/print/trigger + # echo 'hist:keys=lat,common_pid:sort=lat' > events/synthetic/latency/trigger + +The difference this time is that instead of using the trace_marker to start +the latency, the sched_waking event is used, matching the common_pid for the +trace_marker write with the pid that is being woken by sched_waking. + +After running cyclictest again with the same parameters, we now have:: + + # cat events/synthetic/latency/hist + # event histogram + # + # trigger info: hist:keys=lat,common_pid:vals=hitcount:sort=lat:size=2048 [active] + # + + { lat: 7, common_pid: 2302 } hitcount: 640 + { lat: 7, common_pid: 2299 } hitcount: 42 + { lat: 7, common_pid: 2303 } hitcount: 18 + { lat: 7, common_pid: 2305 } hitcount: 166 + { lat: 7, common_pid: 2306 } hitcount: 1 + { lat: 7, common_pid: 2301 } hitcount: 91 + { lat: 7, common_pid: 2300 } hitcount: 17 + { lat: 8, common_pid: 2303 } hitcount: 8296 + { lat: 8, common_pid: 2304 } hitcount: 6864 + { lat: 8, common_pid: 2305 } hitcount: 9464 + { lat: 8, common_pid: 2301 } hitcount: 9213 + { lat: 8, common_pid: 2306 } hitcount: 6246 + { lat: 8, common_pid: 2302 } hitcount: 8797 + { lat: 8, common_pid: 2299 } hitcount: 8771 + { lat: 8, common_pid: 2300 } hitcount: 8119 + { lat: 9, common_pid: 2305 } hitcount: 1519 + { lat: 9, common_pid: 2299 } hitcount: 2346 + { lat: 9, common_pid: 2303 } hitcount: 2841 + { lat: 9, common_pid: 2301 } hitcount: 1846 + { lat: 9, common_pid: 2304 } hitcount: 3861 + { lat: 9, common_pid: 2302 } hitcount: 1210 + { lat: 9, common_pid: 2300 } hitcount: 2762 + { lat: 9, common_pid: 2306 } hitcount: 4247 + { lat: 10, common_pid: 2299 } hitcount: 16 + { lat: 10, common_pid: 2306 } hitcount: 333 + { lat: 10, common_pid: 2303 } hitcount: 16 + { lat: 10, common_pid: 2304 } hitcount: 168 + { lat: 10, common_pid: 2302 } hitcount: 240 + { lat: 10, common_pid: 2301 } hitcount: 28 + { lat: 10, common_pid: 2300 } hitcount: 95 + { lat: 10, common_pid: 2305 } hitcount: 18 + { lat: 11, common_pid: 2303 } hitcount: 5 + { lat: 11, common_pid: 2305 } hitcount: 8 + { lat: 11, common_pid: 2306 } hitcount: 221 + { lat: 11, common_pid: 2302 } hitcount: 76 + { lat: 11, common_pid: 2304 } hitcount: 26 + { lat: 11, common_pid: 2300 } hitcount: 125 + { lat: 11, common_pid: 2299 } hitcount: 2 + { lat: 12, common_pid: 2305 } hitcount: 3 + { lat: 12, common_pid: 2300 } hitcount: 6 + { lat: 12, common_pid: 2306 } hitcount: 90 + { lat: 12, common_pid: 2302 } hitcount: 4 + { lat: 12, common_pid: 2303 } hitcount: 1 + { lat: 12, common_pid: 2304 } hitcount: 122 + { lat: 13, common_pid: 2300 } hitcount: 12 + { lat: 13, common_pid: 2301 } hitcount: 1 + { lat: 13, common_pid: 2306 } hitcount: 32 + { lat: 13, common_pid: 2302 } hitcount: 5 + { lat: 13, common_pid: 2305 } hitcount: 1 + { lat: 13, common_pid: 2303 } hitcount: 1 + { lat: 13, common_pid: 2304 } hitcount: 61 + { lat: 14, common_pid: 2303 } hitcount: 4 + { lat: 14, common_pid: 2306 } hitcount: 5 + { lat: 14, common_pid: 2305 } hitcount: 4 + { lat: 14, common_pid: 2304 } hitcount: 62 + { lat: 14, common_pid: 2302 } hitcount: 19 + { lat: 14, common_pid: 2300 } hitcount: 33 + { lat: 14, common_pid: 2299 } hitcount: 1 + { lat: 14, common_pid: 2301 } hitcount: 4 + { lat: 15, common_pid: 2305 } hitcount: 1 + { lat: 15, common_pid: 2302 } hitcount: 25 + { lat: 15, common_pid: 2300 } hitcount: 11 + { lat: 15, common_pid: 2299 } hitcount: 5 + { lat: 15, common_pid: 2301 } hitcount: 1 + { lat: 15, common_pid: 2304 } hitcount: 8 + { lat: 15, common_pid: 2303 } hitcount: 1 + { lat: 15, common_pid: 2306 } hitcount: 6 + { lat: 16, common_pid: 2302 } hitcount: 31 + { lat: 16, common_pid: 2306 } hitcount: 3 + { lat: 16, common_pid: 2300 } hitcount: 5 + { lat: 17, common_pid: 2302 } hitcount: 6 + { lat: 17, common_pid: 2303 } hitcount: 1 + { lat: 18, common_pid: 2304 } hitcount: 1 + { lat: 18, common_pid: 2302 } hitcount: 8 + { lat: 18, common_pid: 2299 } hitcount: 1 + { lat: 18, common_pid: 2301 } hitcount: 1 + { lat: 19, common_pid: 2303 } hitcount: 4 + { lat: 19, common_pid: 2304 } hitcount: 5 + { lat: 19, common_pid: 2302 } hitcount: 4 + { lat: 19, common_pid: 2299 } hitcount: 3 + { lat: 19, common_pid: 2306 } hitcount: 1 + { lat: 19, common_pid: 2300 } hitcount: 4 + { lat: 19, common_pid: 2305 } hitcount: 5 + { lat: 20, common_pid: 2299 } hitcount: 2 + { lat: 20, common_pid: 2302 } hitcount: 3 + { lat: 20, common_pid: 2305 } hitcount: 1 + { lat: 20, common_pid: 2300 } hitcount: 2 + { lat: 20, common_pid: 2301 } hitcount: 2 + { lat: 20, common_pid: 2303 } hitcount: 3 + { lat: 21, common_pid: 2305 } hitcount: 1 + { lat: 21, common_pid: 2299 } hitcount: 5 + { lat: 21, common_pid: 2303 } hitcount: 4 + { lat: 21, common_pid: 2302 } hitcount: 7 + { lat: 21, common_pid: 2300 } hitcount: 1 + { lat: 21, common_pid: 2301 } hitcount: 5 + { lat: 21, common_pid: 2304 } hitcount: 2 + { lat: 22, common_pid: 2302 } hitcount: 5 + { lat: 22, common_pid: 2303 } hitcount: 1 + { lat: 22, common_pid: 2306 } hitcount: 3 + { lat: 22, common_pid: 2301 } hitcount: 2 + { lat: 22, common_pid: 2300 } hitcount: 1 + { lat: 22, common_pid: 2299 } hitcount: 1 + { lat: 22, common_pid: 2305 } hitcount: 1 + { lat: 22, common_pid: 2304 } hitcount: 1 + { lat: 23, common_pid: 2299 } hitcount: 1 + { lat: 23, common_pid: 2306 } hitcount: 2 + { lat: 23, common_pid: 2302 } hitcount: 6 + { lat: 24, common_pid: 2302 } hitcount: 3 + { lat: 24, common_pid: 2300 } hitcount: 1 + { lat: 24, common_pid: 2306 } hitcount: 2 + { lat: 24, common_pid: 2305 } hitcount: 1 + { lat: 24, common_pid: 2299 } hitcount: 1 + { lat: 25, common_pid: 2300 } hitcount: 1 + { lat: 25, common_pid: 2302 } hitcount: 4 + { lat: 26, common_pid: 2302 } hitcount: 2 + { lat: 27, common_pid: 2305 } hitcount: 1 + { lat: 27, common_pid: 2300 } hitcount: 1 + { lat: 27, common_pid: 2302 } hitcount: 3 + { lat: 28, common_pid: 2306 } hitcount: 1 + { lat: 28, common_pid: 2302 } hitcount: 4 + { lat: 29, common_pid: 2302 } hitcount: 1 + { lat: 29, common_pid: 2300 } hitcount: 2 + { lat: 29, common_pid: 2306 } hitcount: 1 + { lat: 29, common_pid: 2304 } hitcount: 1 + { lat: 30, common_pid: 2302 } hitcount: 4 + { lat: 31, common_pid: 2302 } hitcount: 6 + { lat: 32, common_pid: 2302 } hitcount: 1 + { lat: 33, common_pid: 2299 } hitcount: 1 + { lat: 33, common_pid: 2302 } hitcount: 3 + { lat: 34, common_pid: 2302 } hitcount: 2 + { lat: 35, common_pid: 2302 } hitcount: 1 + { lat: 35, common_pid: 2304 } hitcount: 1 + { lat: 36, common_pid: 2302 } hitcount: 4 + { lat: 37, common_pid: 2302 } hitcount: 6 + { lat: 38, common_pid: 2302 } hitcount: 2 + { lat: 39, common_pid: 2302 } hitcount: 2 + { lat: 39, common_pid: 2304 } hitcount: 1 + { lat: 40, common_pid: 2304 } hitcount: 2 + { lat: 40, common_pid: 2302 } hitcount: 5 + { lat: 41, common_pid: 2304 } hitcount: 1 + { lat: 41, common_pid: 2302 } hitcount: 8 + { lat: 42, common_pid: 2302 } hitcount: 6 + { lat: 42, common_pid: 2304 } hitcount: 1 + { lat: 43, common_pid: 2302 } hitcount: 3 + { lat: 43, common_pid: 2304 } hitcount: 4 + { lat: 44, common_pid: 2302 } hitcount: 6 + { lat: 45, common_pid: 2302 } hitcount: 5 + { lat: 46, common_pid: 2302 } hitcount: 5 + { lat: 47, common_pid: 2302 } hitcount: 7 + { lat: 48, common_pid: 2301 } hitcount: 1 + { lat: 48, common_pid: 2302 } hitcount: 9 + { lat: 49, common_pid: 2302 } hitcount: 3 + { lat: 50, common_pid: 2302 } hitcount: 1 + { lat: 50, common_pid: 2301 } hitcount: 1 + { lat: 51, common_pid: 2302 } hitcount: 2 + { lat: 51, common_pid: 2301 } hitcount: 1 + { lat: 61, common_pid: 2302 } hitcount: 1 + { lat: 110, common_pid: 2302 } hitcount: 1 + + Totals: + Hits: 89565 + Entries: 158 + Dropped: 0 + +This doesn't tell us any information about how late cyclictest may have +woken up, but it does show us a nice histogram of how long it took from +the time that cyclictest was woken to the time it made it into user space. -- cgit v1.2.3