From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- Documentation/virt/kvm/devices/arm-vgic-v3.rst | 291 +++++++++++++++++++++++++ 1 file changed, 291 insertions(+) create mode 100644 Documentation/virt/kvm/devices/arm-vgic-v3.rst (limited to 'Documentation/virt/kvm/devices/arm-vgic-v3.rst') diff --git a/Documentation/virt/kvm/devices/arm-vgic-v3.rst b/Documentation/virt/kvm/devices/arm-vgic-v3.rst new file mode 100644 index 000000000..51e5e5762 --- /dev/null +++ b/Documentation/virt/kvm/devices/arm-vgic-v3.rst @@ -0,0 +1,291 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================================================== +ARM Virtual Generic Interrupt Controller v3 and later (VGICv3) +============================================================== + + +Device types supported: + - KVM_DEV_TYPE_ARM_VGIC_V3 ARM Generic Interrupt Controller v3.0 + +Only one VGIC instance may be instantiated through this API. The created VGIC +will act as the VM interrupt controller, requiring emulated user-space devices +to inject interrupts to the VGIC instead of directly to CPUs. It is not +possible to create both a GICv3 and GICv2 on the same VM. + +Creating a guest GICv3 device requires a host GICv3 as well. + + +Groups: + KVM_DEV_ARM_VGIC_GRP_ADDR + Attributes: + + KVM_VGIC_V3_ADDR_TYPE_DIST (rw, 64-bit) + Base address in the guest physical address space of the GICv3 distributor + register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V3. + This address needs to be 64K aligned and the region covers 64 KByte. + + KVM_VGIC_V3_ADDR_TYPE_REDIST (rw, 64-bit) + Base address in the guest physical address space of the GICv3 + redistributor register mappings. There are two 64K pages for each + VCPU and all of the redistributor pages are contiguous. + Only valid for KVM_DEV_TYPE_ARM_VGIC_V3. + This address needs to be 64K aligned. + + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION (rw, 64-bit) + The attribute data pointed to by kvm_device_attr.addr is a __u64 value:: + + bits: | 63 .... 52 | 51 .... 16 | 15 - 12 |11 - 0 + values: | count | base | flags | index + + - index encodes the unique redistributor region index + - flags: reserved for future use, currently 0 + - base field encodes bits [51:16] of the guest physical base address + of the first redistributor in the region. + - count encodes the number of redistributors in the region. Must be + greater than 0. + + There are two 64K pages for each redistributor in the region and + redistributors are laid out contiguously within the region. Regions + are filled with redistributors in the index order. The sum of all + region count fields must be greater than or equal to the number of + VCPUs. Redistributor regions must be registered in the incremental + index order, starting from index 0. + + The characteristics of a specific redistributor region can be read + by presetting the index field in the attr data. + Only valid for KVM_DEV_TYPE_ARM_VGIC_V3. + + It is invalid to mix calls with KVM_VGIC_V3_ADDR_TYPE_REDIST and + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION attributes. + + Errors: + + ======= ============================================================= + -E2BIG Address outside of addressable IPA range + -EINVAL Incorrectly aligned address, bad redistributor region + count/index, mixed redistributor region attribute usage + -EEXIST Address already configured + -ENOENT Attempt to read the characteristics of a non existing + redistributor region + -ENXIO The group or attribute is unknown/unsupported for this device + or hardware support is missing. + -EFAULT Invalid user pointer for attr->addr. + ======= ============================================================= + + + KVM_DEV_ARM_VGIC_GRP_DIST_REGS, KVM_DEV_ARM_VGIC_GRP_REDIST_REGS + Attributes: + + The attr field of kvm_device_attr encodes two values:: + + bits: | 63 .... 32 | 31 .... 0 | + values: | mpidr | offset | + + All distributor regs are (rw, 32-bit) and kvm_device_attr.addr points to a + __u32 value. 64-bit registers must be accessed by separately accessing the + lower and higher word. + + Writes to read-only registers are ignored by the kernel. + + KVM_DEV_ARM_VGIC_GRP_DIST_REGS accesses the main distributor registers. + KVM_DEV_ARM_VGIC_GRP_REDIST_REGS accesses the redistributor of the CPU + specified by the mpidr. + + The offset is relative to the "[Re]Distributor base address" as defined + in the GICv3/4 specs. Getting or setting such a register has the same + effect as reading or writing the register on real hardware, except for the + following registers: GICD_STATUSR, GICR_STATUSR, GICD_ISPENDR, + GICR_ISPENDR0, GICD_ICPENDR, and GICR_ICPENDR0. These registers behave + differently when accessed via this interface compared to their + architecturally defined behavior to allow software a full view of the + VGIC's internal state. + + The mpidr field is used to specify which + redistributor is accessed. The mpidr is ignored for the distributor. + + The mpidr encoding is based on the affinity information in the + architecture defined MPIDR, and the field is encoded as follows:: + + | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 | + | Aff3 | Aff2 | Aff1 | Aff0 | + + Note that distributor fields are not banked, but return the same value + regardless of the mpidr used to access the register. + + GICD_IIDR.Revision is updated when the KVM implementation is changed in a + way directly observable by the guest or userspace. Userspace should read + GICD_IIDR from KVM and write back the read value to confirm its expected + behavior is aligned with the KVM implementation. Userspace should set + GICD_IIDR before setting any other registers to ensure the expected + behavior. + + + The GICD_STATUSR and GICR_STATUSR registers are architecturally defined such + that a write of a clear bit has no effect, whereas a write with a set bit + clears that value. To allow userspace to freely set the values of these two + registers, setting the attributes with the register offsets for these two + registers simply sets the non-reserved bits to the value written. + + + Accesses (reads and writes) to the GICD_ISPENDR register region and + GICR_ISPENDR0 registers get/set the value of the latched pending state for + the interrupts. + + This is identical to the value returned by a guest read from ISPENDR for an + edge triggered interrupt, but may differ for level triggered interrupts. + For edge triggered interrupts, once an interrupt becomes pending (whether + because of an edge detected on the input line or because of a guest write + to ISPENDR) this state is "latched", and only cleared when either the + interrupt is activated or when the guest writes to ICPENDR. A level + triggered interrupt may be pending either because the level input is held + high by a device, or because of a guest write to the ISPENDR register. Only + ISPENDR writes are latched; if the device lowers the line level then the + interrupt is no longer pending unless the guest also wrote to ISPENDR, and + conversely writes to ICPENDR or activations of the interrupt do not clear + the pending status if the line level is still being held high. (These + rules are documented in the GICv3 specification descriptions of the ICPENDR + and ISPENDR registers.) For a level triggered interrupt the value accessed + here is that of the latch which is set by ISPENDR and cleared by ICPENDR or + interrupt activation, whereas the value returned by a guest read from + ISPENDR is the logical OR of the latch value and the input line level. + + Raw access to the latch state is provided to userspace so that it can save + and restore the entire GIC internal state (which is defined by the + combination of the current input line level and the latch state, and cannot + be deduced from purely the line level and the value of the ISPENDR + registers). + + Accesses to GICD_ICPENDR register region and GICR_ICPENDR0 registers have + RAZ/WI semantics, meaning that reads always return 0 and writes are always + ignored. + + Errors: + + ====== ===================================================== + -ENXIO Getting or setting this register is not yet supported + -EBUSY One or more VCPUs are running + ====== ===================================================== + + + KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS + Attributes: + + The attr field of kvm_device_attr encodes two values:: + + bits: | 63 .... 32 | 31 .... 16 | 15 .... 0 | + values: | mpidr | RES | instr | + + The mpidr field encodes the CPU ID based on the affinity information in the + architecture defined MPIDR, and the field is encoded as follows:: + + | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 | + | Aff3 | Aff2 | Aff1 | Aff0 | + + The instr field encodes the system register to access based on the fields + defined in the A64 instruction set encoding for system register access + (RES means the bits are reserved for future use and should be zero):: + + | 15 ... 14 | 13 ... 11 | 10 ... 7 | 6 ... 3 | 2 ... 0 | + | Op 0 | Op1 | CRn | CRm | Op2 | + + All system regs accessed through this API are (rw, 64-bit) and + kvm_device_attr.addr points to a __u64 value. + + KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS accesses the CPU interface registers for the + CPU specified by the mpidr field. + + CPU interface registers access is not implemented for AArch32 mode. + Error -ENXIO is returned when accessed in AArch32 mode. + + Errors: + + ======= ===================================================== + -ENXIO Getting or setting this register is not yet supported + -EBUSY VCPU is running + -EINVAL Invalid mpidr or register value supplied + ======= ===================================================== + + + KVM_DEV_ARM_VGIC_GRP_NR_IRQS + Attributes: + + A value describing the number of interrupts (SGI, PPI and SPI) for + this GIC instance, ranging from 64 to 1024, in increments of 32. + + kvm_device_attr.addr points to a __u32 value. + + Errors: + + ======= ====================================== + -EINVAL Value set is out of the expected range + -EBUSY Value has already be set. + ======= ====================================== + + + KVM_DEV_ARM_VGIC_GRP_CTRL + Attributes: + + KVM_DEV_ARM_VGIC_CTRL_INIT + request the initialization of the VGIC, no additional parameter in + kvm_device_attr.addr. Must be called after all VCPUs have been created. + KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES + save all LPI pending bits into guest RAM pending tables. + + The first kB of the pending table is not altered by this operation. + + Errors: + + ======= ======================================================== + -ENXIO VGIC not properly configured as required prior to calling + this attribute + -ENODEV no online VCPU + -ENOMEM memory shortage when allocating vgic internal data + -EFAULT Invalid guest ram access + -EBUSY One or more VCPUS are running + ======= ======================================================== + + + KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO + Attributes: + + The attr field of kvm_device_attr encodes the following values:: + + bits: | 63 .... 32 | 31 .... 10 | 9 .... 0 | + values: | mpidr | info | vINTID | + + The vINTID specifies which set of IRQs is reported on. + + The info field specifies which information userspace wants to get or set + using this interface. Currently we support the following info values: + + VGIC_LEVEL_INFO_LINE_LEVEL: + Get/Set the input level of the IRQ line for a set of 32 contiguously + numbered interrupts. + + vINTID must be a multiple of 32. + + kvm_device_attr.addr points to a __u32 value which will contain a + bitmap where a set bit means the interrupt level is asserted. + + Bit[n] indicates the status for interrupt vINTID + n. + + SGIs and any interrupt with a higher ID than the number of interrupts + supported, will be RAZ/WI. LPIs are always edge-triggered and are + therefore not supported by this interface. + + PPIs are reported per VCPU as specified in the mpidr field, and SPIs are + reported with the same value regardless of the mpidr specified. + + The mpidr field encodes the CPU ID based on the affinity information in the + architecture defined MPIDR, and the field is encoded as follows:: + + | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 | + | Aff3 | Aff2 | Aff1 | Aff0 | + + Errors: + + ======= ============================================= + -EINVAL vINTID is not multiple of 32 or info field is + not VGIC_LEVEL_INFO_LINE_LEVEL + ======= ============================================= -- cgit v1.2.3