From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- arch/arm/Kconfig | 1813 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1813 insertions(+) create mode 100644 arch/arm/Kconfig (limited to 'arch/arm/Kconfig') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig new file mode 100644 index 0000000000..9557808e89 --- /dev/null +++ b/arch/arm/Kconfig @@ -0,0 +1,1813 @@ +# SPDX-License-Identifier: GPL-2.0 +config ARM + bool + default y + select ARCH_32BIT_OFF_T + select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND + select ARCH_HAS_BINFMT_FLAT + select ARCH_HAS_CPU_FINALIZE_INIT if MMU + select ARCH_HAS_CURRENT_STACK_POINTER + select ARCH_HAS_DEBUG_VIRTUAL if MMU + select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE + select ARCH_HAS_ELF_RANDOMIZE + select ARCH_HAS_FORTIFY_SOURCE + select ARCH_HAS_KEEPINITRD + select ARCH_HAS_KCOV + select ARCH_HAS_MEMBARRIER_SYNC_CORE + select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE + select ARCH_HAS_PTE_SPECIAL if ARM_LPAE + select ARCH_HAS_SETUP_DMA_OPS + select ARCH_HAS_SET_MEMORY + select ARCH_STACKWALK + select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL + select ARCH_HAS_STRICT_MODULE_RWX if MMU + select ARCH_HAS_SYNC_DMA_FOR_DEVICE + select ARCH_HAS_SYNC_DMA_FOR_CPU + select ARCH_HAS_TEARDOWN_DMA_OPS if MMU + select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST + select ARCH_HAVE_NMI_SAFE_CMPXCHG if CPU_V7 || CPU_V7M || CPU_V6K + select ARCH_HAS_GCOV_PROFILE_ALL + select ARCH_KEEP_MEMBLOCK + select ARCH_HAS_UBSAN_SANITIZE_ALL + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX + select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7 + select ARCH_SUPPORTS_ATOMIC_RMW + select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE + select ARCH_USE_BUILTIN_BSWAP + select ARCH_USE_CMPXCHG_LOCKREF + select ARCH_USE_MEMTEST + select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU + select ARCH_WANT_GENERAL_HUGETLB + select ARCH_WANT_IPC_PARSE_VERSION + select ARCH_WANT_LD_ORPHAN_WARN + select BINFMT_FLAT_ARGVP_ENVP_ON_STACK + select BUILDTIME_TABLE_SORT if MMU + select COMMON_CLK if !(ARCH_RPC || ARCH_FOOTBRIDGE) + select CLONE_BACKWARDS + select CPU_PM if SUSPEND || CPU_IDLE + select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS + select DMA_DECLARE_COHERENT + select DMA_GLOBAL_POOL if !MMU + select DMA_OPS + select DMA_NONCOHERENT_MMAP if MMU + select EDAC_SUPPORT + select EDAC_ATOMIC_SCRUB + select GENERIC_ALLOCATOR + select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY + select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI + select GENERIC_CLOCKEVENTS_BROADCAST if SMP + select GENERIC_IRQ_IPI if SMP + select GENERIC_CPU_AUTOPROBE + select GENERIC_EARLY_IOREMAP + select GENERIC_IDLE_POLL_SETUP + select GENERIC_IRQ_MULTI_HANDLER + select GENERIC_IRQ_PROBE + select GENERIC_IRQ_SHOW + select GENERIC_IRQ_SHOW_LEVEL + select GENERIC_LIB_DEVMEM_IS_ALLOWED + select GENERIC_PCI_IOMAP + select GENERIC_SCHED_CLOCK + select GENERIC_SMP_IDLE_THREAD + select HARDIRQS_SW_RESEND + select HAS_IOPORT + select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT + select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 + select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU + select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL + select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU + select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL + select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN + select HAVE_ARCH_MMAP_RND_BITS if MMU + select HAVE_ARCH_PFN_VALID + select HAVE_ARCH_SECCOMP + select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT + select HAVE_ARCH_THREAD_STRUCT_WHITELIST + select HAVE_ARCH_TRACEHOOK + select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARM_LPAE + select HAVE_ARM_SMCCC if CPU_V7 + select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32 + select HAVE_CONTEXT_TRACKING_USER + select HAVE_C_RECORDMCOUNT + select HAVE_BUILDTIME_MCOUNT_SORT + select HAVE_DEBUG_KMEMLEAK if !XIP_KERNEL + select HAVE_DMA_CONTIGUOUS if MMU + select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU + select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE + select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU + select HAVE_EXIT_THREAD + select HAVE_FAST_GUP if ARM_LPAE + select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL + select HAVE_FUNCTION_ERROR_INJECTION + select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_FUNCTION_TRACER if !XIP_KERNEL + select HAVE_GCC_PLUGINS + select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7) + select HAVE_IRQ_TIME_ACCOUNTING + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_LZ4 + select HAVE_KERNEL_LZMA + select HAVE_KERNEL_LZO + select HAVE_KERNEL_XZ + select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M + select HAVE_KRETPROBES if HAVE_KPROBES + select HAVE_MOD_ARCH_SPECIFIC + select HAVE_NMI + select HAVE_OPTPROBES if !THUMB2_KERNEL + select HAVE_PCI if MMU + select HAVE_PERF_EVENTS + select HAVE_PERF_REGS + select HAVE_PERF_USER_STACK_DUMP + select MMU_GATHER_RCU_TABLE_FREE if SMP && ARM_LPAE + select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_RSEQ + select HAVE_STACKPROTECTOR + select HAVE_SYSCALL_TRACEPOINTS + select HAVE_UID16 + select HAVE_VIRT_CPU_ACCOUNTING_GEN + select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU + select IRQ_FORCED_THREADING + select LOCK_MM_AND_FIND_VMA + select MODULES_USE_ELF_REL + select NEED_DMA_MAP_STATE + select OF_EARLY_FLATTREE if OF + select OLD_SIGACTION + select OLD_SIGSUSPEND3 + select PCI_DOMAINS_GENERIC if PCI + select PCI_SYSCALL if PCI + select PERF_USE_VMALLOC + select RTC_LIB + select SPARSE_IRQ if !(ARCH_FOOTBRIDGE || ARCH_RPC) + select SYS_SUPPORTS_APM_EMULATION + select THREAD_INFO_IN_TASK + select TIMER_OF if OF + select HAVE_ARCH_VMAP_STACK if MMU && ARM_HAS_GROUP_RELOCS + select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M + select USE_OF if !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100) + # Above selects are sorted alphabetically; please add new ones + # according to that. Thanks. + help + The ARM series is a line of low-power-consumption RISC chip designs + licensed by ARM Ltd and targeted at embedded applications and + handhelds such as the Compaq IPAQ. ARM-based PCs are no longer + manufactured, but legacy ARM-based PC hardware remains popular in + Europe. There is an ARM Linux project with a web page at + . + +config ARM_HAS_GROUP_RELOCS + def_bool y + depends on !LD_IS_LLD || LLD_VERSION >= 140000 + depends on !COMPILE_TEST + help + Whether or not to use R_ARM_ALU_PC_Gn or R_ARM_LDR_PC_Gn group + relocations, which have been around for a long time, but were not + supported in LLD until version 14. The combined range is -/+ 256 MiB, + which is usually sufficient, but not for allyesconfig, so we disable + this feature when doing compile testing. + +config ARM_DMA_USE_IOMMU + bool + select NEED_SG_DMA_LENGTH + +if ARM_DMA_USE_IOMMU + +config ARM_DMA_IOMMU_ALIGNMENT + int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers" + range 4 9 + default 8 + help + DMA mapping framework by default aligns all buffers to the smallest + PAGE_SIZE order which is greater than or equal to the requested buffer + size. This works well for buffers up to a few hundreds kilobytes, but + for larger buffers it just a waste of address space. Drivers which has + relatively small addressing window (like 64Mib) might run out of + virtual space with just a few allocations. + + With this parameter you can specify the maximum PAGE_SIZE order for + DMA IOMMU buffers. Larger buffers will be aligned only to this + specified order. The order is expressed as a power of two multiplied + by the PAGE_SIZE. + +endif + +config SYS_SUPPORTS_APM_EMULATION + bool + +config HAVE_TCM + bool + select GENERIC_ALLOCATOR + +config HAVE_PROC_CPU + bool + +config NO_IOPORT_MAP + bool + +config SBUS + bool + +config STACKTRACE_SUPPORT + bool + default y + +config LOCKDEP_SUPPORT + bool + default y + +config ARCH_HAS_ILOG2_U32 + bool + +config ARCH_HAS_ILOG2_U64 + bool + +config ARCH_HAS_BANDGAP + bool + +config FIX_EARLYCON_MEM + def_bool y if MMU + +config GENERIC_HWEIGHT + bool + default y + +config GENERIC_CALIBRATE_DELAY + bool + default y + +config ARCH_MAY_HAVE_PC_FDC + bool + +config ARCH_SUPPORTS_UPROBES + def_bool y + +config GENERIC_ISA_DMA + bool + +config FIQ + bool + +config ARCH_MTD_XIP + bool + +config ARM_PATCH_PHYS_VIRT + bool "Patch physical to virtual translations at runtime" if !ARCH_MULTIPLATFORM + default y + depends on MMU + help + Patch phys-to-virt and virt-to-phys translation functions at + boot and module load time according to the position of the + kernel in system memory. + + This can only be used with non-XIP MMU kernels where the base + of physical memory is at a 2 MiB boundary. + + Only disable this option if you know that you do not require + this feature (eg, building a kernel for a single machine) and + you need to shrink the kernel to the minimal size. + +config NEED_MACH_IO_H + bool + help + Select this when mach/io.h is required to provide special + definitions for this platform. The need for mach/io.h should + be avoided when possible. + +config NEED_MACH_MEMORY_H + bool + help + Select this when mach/memory.h is required to provide special + definitions for this platform. The need for mach/memory.h should + be avoided when possible. + +config PHYS_OFFSET + hex "Physical address of main memory" if MMU + depends on !ARM_PATCH_PHYS_VIRT || !AUTO_ZRELADDR + default DRAM_BASE if !MMU + default 0x00000000 if ARCH_FOOTBRIDGE + default 0x10000000 if ARCH_OMAP1 || ARCH_RPC + default 0xa0000000 if ARCH_PXA + default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100 + default 0 + help + Please provide the physical address corresponding to the + location of main memory in your system. + +config GENERIC_BUG + def_bool y + depends on BUG + +config PGTABLE_LEVELS + int + default 3 if ARM_LPAE + default 2 + +menu "System Type" + +config MMU + bool "MMU-based Paged Memory Management Support" + default y + help + Select if you want MMU-based virtualised addressing space + support by paged memory management. If unsure, say 'Y'. + +config ARM_SINGLE_ARMV7M + def_bool !MMU + select ARM_NVIC + select CPU_V7M + select NO_IOPORT_MAP + +config ARCH_MMAP_RND_BITS_MIN + default 8 + +config ARCH_MMAP_RND_BITS_MAX + default 14 if PAGE_OFFSET=0x40000000 + default 15 if PAGE_OFFSET=0x80000000 + default 16 + +config ARCH_MULTIPLATFORM + bool "Require kernel to be portable to multiple machines" if EXPERT + depends on MMU && !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100) + default y + help + In general, all Arm machines can be supported in a single + kernel image, covering either Armv4/v5 or Armv6/v7. + + However, some configuration options require hardcoding machine + specific physical addresses or enable errata workarounds that may + break other machines. + + Selecting N here allows using those options, including + DEBUG_UNCOMPRESS, XIP_KERNEL and ZBOOT_ROM. If unsure, say Y. + +menu "Platform selection" + depends on MMU + +comment "CPU Core family selection" + +config ARCH_MULTI_V4 + bool "ARMv4 based platforms (FA526, StrongARM)" + depends on !ARCH_MULTI_V6_V7 + # https://github.com/llvm/llvm-project/issues/50764 + depends on !LD_IS_LLD || LLD_VERSION >= 160000 + select ARCH_MULTI_V4_V5 + select CPU_FA526 if !(CPU_SA110 || CPU_SA1100) + +config ARCH_MULTI_V4T + bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" + depends on !ARCH_MULTI_V6_V7 + # https://github.com/llvm/llvm-project/issues/50764 + depends on !LD_IS_LLD || LLD_VERSION >= 160000 + select ARCH_MULTI_V4_V5 + select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \ + CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \ + CPU_ARM925T || CPU_ARM940T) + +config ARCH_MULTI_V5 + bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" + depends on !ARCH_MULTI_V6_V7 + select ARCH_MULTI_V4_V5 + select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \ + CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \ + CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON) + +config ARCH_MULTI_V4_V5 + bool + +config ARCH_MULTI_V6 + bool "ARMv6 based platforms (ARM11)" + select ARCH_MULTI_V6_V7 + select CPU_V6K + +config ARCH_MULTI_V7 + bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" + default y + select ARCH_MULTI_V6_V7 + select CPU_V7 + select HAVE_SMP + +config ARCH_MULTI_V6_V7 + bool + select MIGHT_HAVE_CACHE_L2X0 + +config ARCH_MULTI_CPU_AUTO + def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) + select ARCH_MULTI_V5 + +endmenu + +config ARCH_VIRT + bool "Dummy Virtual Machine" + depends on ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_GIC_V2M if PCI + select ARM_GIC_V3 + select ARM_GIC_V3_ITS if PCI + select ARM_PSCI + select HAVE_ARM_ARCH_TIMER + +config ARCH_AIROHA + bool "Airoha SoC Support" + depends on ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_GIC_V3 + select ARM_PSCI + select HAVE_ARM_ARCH_TIMER + help + Support for Airoha EN7523 SoCs + +# +# This is sorted alphabetically by mach-* pathname. However, plat-* +# Kconfigs may be included either alphabetically (according to the +# plat- suffix) or along side the corresponding mach-* source. +# +source "arch/arm/mach-actions/Kconfig" + +source "arch/arm/mach-alpine/Kconfig" + +source "arch/arm/mach-artpec/Kconfig" + +source "arch/arm/mach-asm9260/Kconfig" + +source "arch/arm/mach-aspeed/Kconfig" + +source "arch/arm/mach-at91/Kconfig" + +source "arch/arm/mach-axxia/Kconfig" + +source "arch/arm/mach-bcm/Kconfig" + +source "arch/arm/mach-berlin/Kconfig" + +source "arch/arm/mach-clps711x/Kconfig" + +source "arch/arm/mach-davinci/Kconfig" + +source "arch/arm/mach-digicolor/Kconfig" + +source "arch/arm/mach-dove/Kconfig" + +source "arch/arm/mach-ep93xx/Kconfig" + +source "arch/arm/mach-exynos/Kconfig" + +source "arch/arm/mach-footbridge/Kconfig" + +source "arch/arm/mach-gemini/Kconfig" + +source "arch/arm/mach-highbank/Kconfig" + +source "arch/arm/mach-hisi/Kconfig" + +source "arch/arm/mach-hpe/Kconfig" + +source "arch/arm/mach-imx/Kconfig" + +source "arch/arm/mach-ixp4xx/Kconfig" + +source "arch/arm/mach-keystone/Kconfig" + +source "arch/arm/mach-lpc32xx/Kconfig" + +source "arch/arm/mach-mediatek/Kconfig" + +source "arch/arm/mach-meson/Kconfig" + +source "arch/arm/mach-milbeaut/Kconfig" + +source "arch/arm/mach-mmp/Kconfig" + +source "arch/arm/mach-moxart/Kconfig" + +source "arch/arm/mach-mstar/Kconfig" + +source "arch/arm/mach-mv78xx0/Kconfig" + +source "arch/arm/mach-mvebu/Kconfig" + +source "arch/arm/mach-mxs/Kconfig" + +source "arch/arm/mach-nomadik/Kconfig" + +source "arch/arm/mach-npcm/Kconfig" + +source "arch/arm/mach-nspire/Kconfig" + +source "arch/arm/mach-omap1/Kconfig" + +source "arch/arm/mach-omap2/Kconfig" + +source "arch/arm/mach-orion5x/Kconfig" + +source "arch/arm/mach-pxa/Kconfig" + +source "arch/arm/mach-qcom/Kconfig" + +source "arch/arm/mach-rda/Kconfig" + +source "arch/arm/mach-realtek/Kconfig" + +source "arch/arm/mach-rpc/Kconfig" + +source "arch/arm/mach-rockchip/Kconfig" + +source "arch/arm/mach-s3c/Kconfig" + +source "arch/arm/mach-s5pv210/Kconfig" + +source "arch/arm/mach-sa1100/Kconfig" + +source "arch/arm/mach-shmobile/Kconfig" + +source "arch/arm/mach-socfpga/Kconfig" + +source "arch/arm/mach-spear/Kconfig" + +source "arch/arm/mach-sti/Kconfig" + +source "arch/arm/mach-stm32/Kconfig" + +source "arch/arm/mach-sunplus/Kconfig" + +source "arch/arm/mach-sunxi/Kconfig" + +source "arch/arm/mach-tegra/Kconfig" + +source "arch/arm/mach-uniphier/Kconfig" + +source "arch/arm/mach-ux500/Kconfig" + +source "arch/arm/mach-versatile/Kconfig" + +source "arch/arm/mach-vt8500/Kconfig" + +source "arch/arm/mach-zynq/Kconfig" + +# ARMv7-M architecture +config ARCH_LPC18XX + bool "NXP LPC18xx/LPC43xx" + depends on ARM_SINGLE_ARMV7M + select ARCH_HAS_RESET_CONTROLLER + select ARM_AMBA + select CLKSRC_LPC32XX + select PINCTRL + help + Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4 + high performance microcontrollers. + +config ARCH_MPS2 + bool "ARM MPS2 platform" + depends on ARM_SINGLE_ARMV7M + select ARM_AMBA + select CLKSRC_MPS2 + help + Support for Cortex-M Prototyping System (or V2M-MPS2) which comes + with a range of available cores like Cortex-M3/M4/M7. + + Please, note that depends which Application Note is used memory map + for the platform may vary, so adjustment of RAM base might be needed. + +# Definitions to make life easier +config ARCH_ACORN + bool + +config PLAT_ORION + bool + select CLKSRC_MMIO + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + +config PLAT_ORION_LEGACY + bool + select PLAT_ORION + +config PLAT_VERSATILE + bool + +source "arch/arm/mm/Kconfig" + +config IWMMXT + bool "Enable iWMMXt support" + depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B + default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B + help + Enable support for iWMMXt context switching at run time if + running on a CPU that supports it. + +if !MMU +source "arch/arm/Kconfig-nommu" +endif + +config PJ4B_ERRATA_4742 + bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation" + depends on CPU_PJ4B && MACH_ARMADA_370 + default y + help + When coming out of either a Wait for Interrupt (WFI) or a Wait for + Event (WFE) IDLE states, a specific timing sensitivity exists between + the retiring WFI/WFE instructions and the newly issued subsequent + instructions. This sensitivity can result in a CPU hang scenario. + Workaround: + The software must insert either a Data Synchronization Barrier (DSB) + or Data Memory Barrier (DMB) command immediately after the WFI/WFE + instruction + +config ARM_ERRATA_326103 + bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" + depends on CPU_V6 + help + Executing a SWP instruction to read-only memory does not set bit 11 + of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to + treat the access as a read, preventing a COW from occurring and + causing the faulting task to livelock. + +config ARM_ERRATA_411920 + bool "ARM errata: Invalidation of the Instruction Cache operation can fail" + depends on CPU_V6 || CPU_V6K + help + Invalidation of the Instruction Cache operation can + fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. + It does not affect the MPCore. This option enables the ARM Ltd. + recommended workaround. + +config ARM_ERRATA_430973 + bool "ARM errata: Stale prediction on replaced interworking branch" + depends on CPU_V7 + help + This option enables the workaround for the 430973 Cortex-A8 + r1p* erratum. If a code sequence containing an ARM/Thumb + interworking branch is replaced with another code sequence at the + same virtual address, whether due to self-modifying code or virtual + to physical address re-mapping, Cortex-A8 does not recover from the + stale interworking branch prediction. This results in Cortex-A8 + executing the new code sequence in the incorrect ARM or Thumb state. + The workaround enables the BTB/BTAC operations by setting ACTLR.IBE + and also flushes the branch target cache at every context switch. + Note that setting specific bits in the ACTLR register may not be + available in non-secure mode. + +config ARM_ERRATA_458693 + bool "ARM errata: Processor deadlock when a false hazard is created" + depends on CPU_V7 + depends on !ARCH_MULTIPLATFORM + help + This option enables the workaround for the 458693 Cortex-A8 (r2p0) + erratum. For very specific sequences of memory operations, it is + possible for a hazard condition intended for a cache line to instead + be incorrectly associated with a different cache line. This false + hazard might then cause a processor deadlock. The workaround enables + the L1 caching of the NEON accesses and disables the PLD instruction + in the ACTLR register. Note that setting specific bits in the ACTLR + register may not be available in non-secure mode and thus is not + available on a multiplatform kernel. This should be applied by the + bootloader instead. + +config ARM_ERRATA_460075 + bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" + depends on CPU_V7 + depends on !ARCH_MULTIPLATFORM + help + This option enables the workaround for the 460075 Cortex-A8 (r2p0) + erratum. Any asynchronous access to the L2 cache may encounter a + situation in which recent store transactions to the L2 cache are lost + and overwritten with stale memory contents from external memory. The + workaround disables the write-allocate mode for the L2 cache via the + ACTLR register. Note that setting specific bits in the ACTLR register + may not be available in non-secure mode and thus is not available on + a multiplatform kernel. This should be applied by the bootloader + instead. + +config ARM_ERRATA_742230 + bool "ARM errata: DMB operation may be faulty" + depends on CPU_V7 && SMP + depends on !ARCH_MULTIPLATFORM + help + This option enables the workaround for the 742230 Cortex-A9 + (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction + between two write operations may not ensure the correct visibility + ordering of the two writes. This workaround sets a specific bit in + the diagnostic register of the Cortex-A9 which causes the DMB + instruction to behave as a DSB, ensuring the correct behaviour of + the two writes. Note that setting specific bits in the diagnostics + register may not be available in non-secure mode and thus is not + available on a multiplatform kernel. This should be applied by the + bootloader instead. + +config ARM_ERRATA_742231 + bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption" + depends on CPU_V7 && SMP + depends on !ARCH_MULTIPLATFORM + help + This option enables the workaround for the 742231 Cortex-A9 + (r2p0..r2p2) erratum. Under certain conditions, specific to the + Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode, + accessing some data located in the same cache line, may get corrupted + data due to bad handling of the address hazard when the line gets + replaced from one of the CPUs at the same time as another CPU is + accessing it. This workaround sets specific bits in the diagnostic + register of the Cortex-A9 which reduces the linefill issuing + capabilities of the processor. Note that setting specific bits in the + diagnostics register may not be available in non-secure mode and thus + is not available on a multiplatform kernel. This should be applied by + the bootloader instead. + +config ARM_ERRATA_643719 + bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" + depends on CPU_V7 && SMP + default y + help + This option enables the workaround for the 643719 Cortex-A9 (prior to + r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR + register returns zero when it should return one. The workaround + corrects this value, ensuring cache maintenance operations which use + it behave as intended and avoiding data corruption. + +config ARM_ERRATA_720789 + bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" + depends on CPU_V7 + help + This option enables the workaround for the 720789 Cortex-A9 (prior to + r2p0) erratum. A faulty ASID can be sent to the other CPUs for the + broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS. + As a consequence of this erratum, some TLB entries which should be + invalidated are not, resulting in an incoherency in the system page + tables. The workaround changes the TLB flushing routines to invalidate + entries regardless of the ASID. + +config ARM_ERRATA_743622 + bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" + depends on CPU_V7 + depends on !ARCH_MULTIPLATFORM + help + This option enables the workaround for the 743622 Cortex-A9 + (r2p*) erratum. Under very rare conditions, a faulty + optimisation in the Cortex-A9 Store Buffer may lead to data + corruption. This workaround sets a specific bit in the diagnostic + register of the Cortex-A9 which disables the Store Buffer + optimisation, preventing the defect from occurring. This has no + visible impact on the overall performance or power consumption of the + processor. Note that setting specific bits in the diagnostics register + may not be available in non-secure mode and thus is not available on a + multiplatform kernel. This should be applied by the bootloader instead. + +config ARM_ERRATA_751472 + bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" + depends on CPU_V7 + depends on !ARCH_MULTIPLATFORM + help + This option enables the workaround for the 751472 Cortex-A9 (prior + to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the + completion of a following broadcasted operation if the second + operation is received by a CPU before the ICIALLUIS has completed, + potentially leading to corrupted entries in the cache or TLB. + Note that setting specific bits in the diagnostics register may + not be available in non-secure mode and thus is not available on + a multiplatform kernel. This should be applied by the bootloader + instead. + +config ARM_ERRATA_754322 + bool "ARM errata: possible faulty MMU translations following an ASID switch" + depends on CPU_V7 + help + This option enables the workaround for the 754322 Cortex-A9 (r2p*, + r3p*) erratum. A speculative memory access may cause a page table walk + which starts prior to an ASID switch but completes afterwards. This + can populate the micro-TLB with a stale entry which may be hit with + the new ASID. This workaround places two dsb instructions in the mm + switching code so that no page table walks can cross the ASID switch. + +config ARM_ERRATA_754327 + bool "ARM errata: no automatic Store Buffer drain" + depends on CPU_V7 && SMP + help + This option enables the workaround for the 754327 Cortex-A9 (prior to + r2p0) erratum. The Store Buffer does not have any automatic draining + mechanism and therefore a livelock may occur if an external agent + continuously polls a memory location waiting to observe an update. + This workaround defines cpu_relax() as smp_mb(), preventing correctly + written polling loops from denying visibility of updates to memory. + +config ARM_ERRATA_364296 + bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" + depends on CPU_V6 + help + This options enables the workaround for the 364296 ARM1136 + r0p2 erratum (possible cache data corruption with + hit-under-miss enabled). It sets the undocumented bit 31 in + the auxiliary control register and the FI bit in the control + register, thus disabling hit-under-miss without putting the + processor into full low interrupt latency mode. ARM11MPCore + is not affected. + +config ARM_ERRATA_764369 + bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" + depends on CPU_V7 && SMP + help + This option enables the workaround for erratum 764369 + affecting Cortex-A9 MPCore with two or more processors (all + current revisions). Under certain timing circumstances, a data + cache line maintenance operation by MVA targeting an Inner + Shareable memory region may fail to proceed up to either the + Point of Coherency or to the Point of Unification of the + system. This workaround adds a DSB instruction before the + relevant cache maintenance functions and sets a specific bit + in the diagnostic control register of the SCU. + +config ARM_ERRATA_764319 + bool "ARM errata: Read to DBGPRSR and DBGOSLSR may generate Undefined instruction" + depends on CPU_V7 + help + This option enables the workaround for the 764319 Cortex A-9 erratum. + CP14 read accesses to the DBGPRSR and DBGOSLSR registers generate an + unexpected Undefined Instruction exception when the DBGSWENABLE + external pin is set to 0, even when the CP14 accesses are performed + from a privileged mode. This work around catches the exception in a + way the kernel does not stop execution. + +config ARM_ERRATA_775420 + bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" + depends on CPU_V7 + help + This option enables the workaround for the 775420 Cortex-A9 (r2p2, + r2p6,r2p8,r2p10,r3p0) erratum. In case a data cache maintenance + operation aborts with MMU exception, it might cause the processor + to deadlock. This workaround puts DSB before executing ISB if + an abort may occur on cache maintenance. + +config ARM_ERRATA_798181 + bool "ARM errata: TLBI/DSB failure on Cortex-A15" + depends on CPU_V7 && SMP + help + On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not + adequately shooting down all use of the old entries. This + option enables the Linux kernel workaround for this erratum + which sends an IPI to the CPUs that are running the same ASID + as the one being invalidated. + +config ARM_ERRATA_773022 + bool "ARM errata: incorrect instructions may be executed from loop buffer" + depends on CPU_V7 + help + This option enables the workaround for the 773022 Cortex-A15 + (up to r0p4) erratum. In certain rare sequences of code, the + loop buffer may deliver incorrect instructions. This + workaround disables the loop buffer to avoid the erratum. + +config ARM_ERRATA_818325_852422 + bool "ARM errata: A12: some seqs of opposed cond code instrs => deadlock or corruption" + depends on CPU_V7 + help + This option enables the workaround for: + - Cortex-A12 818325: Execution of an UNPREDICTABLE STR or STM + instruction might deadlock. Fixed in r0p1. + - Cortex-A12 852422: Execution of a sequence of instructions might + lead to either a data corruption or a CPU deadlock. Not fixed in + any Cortex-A12 cores yet. + This workaround for all both errata involves setting bit[12] of the + Feature Register. This bit disables an optimisation applied to a + sequence of 2 instructions that use opposing condition codes. + +config ARM_ERRATA_821420 + bool "ARM errata: A12: sequence of VMOV to core registers might lead to a dead lock" + depends on CPU_V7 + help + This option enables the workaround for the 821420 Cortex-A12 + (all revs) erratum. In very rare timing conditions, a sequence + of VMOV to Core registers instructions, for which the second + one is in the shadow of a branch or abort, can lead to a + deadlock when the VMOV instructions are issued out-of-order. + +config ARM_ERRATA_825619 + bool "ARM errata: A12: DMB NSHST/ISHST mixed ... might cause deadlock" + depends on CPU_V7 + help + This option enables the workaround for the 825619 Cortex-A12 + (all revs) erratum. Within rare timing constraints, executing a + DMB NSHST or DMB ISHST instruction followed by a mix of Cacheable + and Device/Strongly-Ordered loads and stores might cause deadlock + +config ARM_ERRATA_857271 + bool "ARM errata: A12: CPU might deadlock under some very rare internal conditions" + depends on CPU_V7 + help + This option enables the workaround for the 857271 Cortex-A12 + (all revs) erratum. Under very rare timing conditions, the CPU might + hang. The workaround is expected to have a < 1% performance impact. + +config ARM_ERRATA_852421 + bool "ARM errata: A17: DMB ST might fail to create order between stores" + depends on CPU_V7 + help + This option enables the workaround for the 852421 Cortex-A17 + (r1p0, r1p1, r1p2) erratum. Under very rare timing conditions, + execution of a DMB ST instruction might fail to properly order + stores from GroupA and stores from GroupB. + +config ARM_ERRATA_852423 + bool "ARM errata: A17: some seqs of opposed cond code instrs => deadlock or corruption" + depends on CPU_V7 + help + This option enables the workaround for: + - Cortex-A17 852423: Execution of a sequence of instructions might + lead to either a data corruption or a CPU deadlock. Not fixed in + any Cortex-A17 cores yet. + This is identical to Cortex-A12 erratum 852422. It is a separate + config option from the A12 erratum due to the way errata are checked + for and handled. + +config ARM_ERRATA_857272 + bool "ARM errata: A17: CPU might deadlock under some very rare internal conditions" + depends on CPU_V7 + help + This option enables the workaround for the 857272 Cortex-A17 erratum. + This erratum is not known to be fixed in any A17 revision. + This is identical to Cortex-A12 erratum 857271. It is a separate + config option from the A12 erratum due to the way errata are checked + for and handled. + +endmenu + +source "arch/arm/common/Kconfig" + +menu "Bus support" + +config ISA + bool + help + Find out whether you have ISA slots on your motherboard. ISA is the + name of a bus system, i.e. the way the CPU talks to the other stuff + inside your box. Other bus systems are PCI, EISA, MicroChannel + (MCA) or VESA. ISA is an older system, now being displaced by PCI; + newer boards don't support it. If you have ISA, say Y, otherwise N. + +# Select ISA DMA interface +config ISA_DMA_API + bool + +config ARM_ERRATA_814220 + bool "ARM errata: Cache maintenance by set/way operations can execute out of order" + depends on CPU_V7 + help + The v7 ARM states that all cache and branch predictor maintenance + operations that do not specify an address execute, relative to + each other, in program order. + However, because of this erratum, an L2 set/way cache maintenance + operation can overtake an L1 set/way cache maintenance operation. + This ERRATA only affected the Cortex-A7 and present in r0p2, r0p3, + r0p4, r0p5. + +endmenu + +menu "Kernel Features" + +config HAVE_SMP + bool + help + This option should be selected by machines which have an SMP- + capable CPU. + + The only effect of this option is to make the SMP-related + options available to the user for configuration. + +config SMP + bool "Symmetric Multi-Processing" + depends on CPU_V6K || CPU_V7 + depends on HAVE_SMP + depends on MMU || ARM_MPU + select IRQ_WORK + help + This enables support for systems with more than one CPU. If you have + a system with only one CPU, say N. If you have a system with more + than one CPU, say Y. + + If you say N here, the kernel will run on uni- and multiprocessor + machines, but will use only one CPU of a multiprocessor machine. If + you say Y here, the kernel will run on many, but not all, + uniprocessor machines. On a uniprocessor machine, the kernel + will run faster if you say N here. + + See also , + and the SMP-HOWTO available at + . + + If you don't know what to do here, say N. + +config SMP_ON_UP + bool "Allow booting SMP kernel on uniprocessor systems" + depends on SMP && MMU + default y + help + SMP kernels contain instructions which fail on non-SMP processors. + Enabling this option allows the kernel to modify itself to make + these instructions safe. Disabling it allows about 1K of space + savings. + + If you don't know what to do here, say Y. + + +config CURRENT_POINTER_IN_TPIDRURO + def_bool y + depends on CPU_32v6K && !CPU_V6 + +config IRQSTACKS + def_bool y + select HAVE_IRQ_EXIT_ON_IRQ_STACK + select HAVE_SOFTIRQ_ON_OWN_STACK + +config ARM_CPU_TOPOLOGY + bool "Support cpu topology definition" + depends on SMP && CPU_V7 + default y + help + Support ARM cpu topology definition. The MPIDR register defines + affinity between processors which is then used to describe the cpu + topology of an ARM System. + +config SCHED_MC + bool "Multi-core scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + +config SCHED_SMT + bool "SMT scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Improves the CPU scheduler's decision making when dealing with + MultiThreading at a cost of slightly increased overhead in some + places. If unsure say N here. + +config HAVE_ARM_SCU + bool + help + This option enables support for the ARM snoop control unit + +config HAVE_ARM_ARCH_TIMER + bool "Architected timer support" + depends on CPU_V7 + select ARM_ARCH_TIMER + help + This option enables support for the ARM architected timer + +config HAVE_ARM_TWD + bool + help + This options enables support for the ARM timer and watchdog unit + +config MCPM + bool "Multi-Cluster Power Management" + depends on CPU_V7 && SMP + help + This option provides the common power management infrastructure + for (multi-)cluster based systems, such as big.LITTLE based + systems. + +config MCPM_QUAD_CLUSTER + bool + depends on MCPM + help + To avoid wasting resources unnecessarily, MCPM only supports up + to 2 clusters by default. + Platforms with 3 or 4 clusters that use MCPM must select this + option to allow the additional clusters to be managed. + +config BIG_LITTLE + bool "big.LITTLE support (Experimental)" + depends on CPU_V7 && SMP + select MCPM + help + This option enables support selections for the big.LITTLE + system architecture. + +config BL_SWITCHER + bool "big.LITTLE switcher support" + depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC + select CPU_PM + help + The big.LITTLE "switcher" provides the core functionality to + transparently handle transition between a cluster of A15's + and a cluster of A7's in a big.LITTLE system. + +config BL_SWITCHER_DUMMY_IF + tristate "Simple big.LITTLE switcher user interface" + depends on BL_SWITCHER && DEBUG_KERNEL + help + This is a simple and dummy char dev interface to control + the big.LITTLE switcher core code. It is meant for + debugging purposes only. + +choice + prompt "Memory split" + depends on MMU + default VMSPLIT_3G + help + Select the desired split between kernel and user memory. + + If you are not absolutely sure what you are doing, leave this + option alone! + + config VMSPLIT_3G + bool "3G/1G user/kernel split" + config VMSPLIT_3G_OPT + depends on !ARM_LPAE + bool "3G/1G user/kernel split (for full 1G low memory)" + config VMSPLIT_2G + bool "2G/2G user/kernel split" + config VMSPLIT_1G + bool "1G/3G user/kernel split" +endchoice + +config PAGE_OFFSET + hex + default PHYS_OFFSET if !MMU + default 0x40000000 if VMSPLIT_1G + default 0x80000000 if VMSPLIT_2G + default 0xB0000000 if VMSPLIT_3G_OPT + default 0xC0000000 + +config KASAN_SHADOW_OFFSET + hex + depends on KASAN + default 0x1f000000 if PAGE_OFFSET=0x40000000 + default 0x5f000000 if PAGE_OFFSET=0x80000000 + default 0x9f000000 if PAGE_OFFSET=0xC0000000 + default 0x8f000000 if PAGE_OFFSET=0xB0000000 + default 0xffffffff + +config NR_CPUS + int "Maximum number of CPUs (2-32)" + range 2 16 if DEBUG_KMAP_LOCAL + range 2 32 if !DEBUG_KMAP_LOCAL + depends on SMP + default "4" + help + The maximum number of CPUs that the kernel can support. + Up to 32 CPUs can be supported, or up to 16 if kmap_local() + debugging is enabled, which uses half of the per-CPU fixmap + slots as guard regions. + +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs" + depends on SMP + select GENERIC_IRQ_MIGRATION + help + Say Y here to experiment with turning CPUs off and on. CPUs + can be controlled through /sys/devices/system/cpu. + +config ARM_PSCI + bool "Support for the ARM Power State Coordination Interface (PSCI)" + depends on HAVE_ARM_SMCCC + select ARM_PSCI_FW + help + Say Y here if you want Linux to communicate with system firmware + implementing the PSCI specification for CPU-centric power + management operations described in ARM document number ARM DEN + 0022A ("Power State Coordination Interface System Software on + ARM processors"). + +config HZ_FIXED + int + default 128 if SOC_AT91RM9200 + default 0 + +choice + depends on HZ_FIXED = 0 + prompt "Timer frequency" + +config HZ_100 + bool "100 Hz" + +config HZ_200 + bool "200 Hz" + +config HZ_250 + bool "250 Hz" + +config HZ_300 + bool "300 Hz" + +config HZ_500 + bool "500 Hz" + +config HZ_1000 + bool "1000 Hz" + +endchoice + +config HZ + int + default HZ_FIXED if HZ_FIXED != 0 + default 100 if HZ_100 + default 200 if HZ_200 + default 250 if HZ_250 + default 300 if HZ_300 + default 500 if HZ_500 + default 1000 + +config SCHED_HRTICK + def_bool HIGH_RES_TIMERS + +config THUMB2_KERNEL + bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY + depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K + default y if CPU_THUMBONLY + select ARM_UNWIND + help + By enabling this option, the kernel will be compiled in + Thumb-2 mode. + + If unsure, say N. + +config ARM_PATCH_IDIV + bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()" + depends on CPU_32v7 + default y + help + The ARM compiler inserts calls to __aeabi_idiv() and + __aeabi_uidiv() when it needs to perform division on signed + and unsigned integers. Some v7 CPUs have support for the sdiv + and udiv instructions that can be used to implement those + functions. + + Enabling this option allows the kernel to modify itself to + replace the first two instructions of these library functions + with the sdiv or udiv plus "bx lr" instructions when the CPU + it is running on supports them. Typically this will be faster + and less power intensive than running the original library + code to do integer division. + +config AEABI + bool "Use the ARM EABI to compile the kernel" if !CPU_V7 && \ + !CPU_V7M && !CPU_V6 && !CPU_V6K && !CC_IS_CLANG + default CPU_V7 || CPU_V7M || CPU_V6 || CPU_V6K || CC_IS_CLANG + help + This option allows for the kernel to be compiled using the latest + ARM ABI (aka EABI). This is only useful if you are using a user + space environment that is also compiled with EABI. + + Since there are major incompatibilities between the legacy ABI and + EABI, especially with regard to structure member alignment, this + option also changes the kernel syscall calling convention to + disambiguate both ABIs and allow for backward compatibility support + (selected with CONFIG_OABI_COMPAT). + + To use this you need GCC version 4.0.0 or later. + +config OABI_COMPAT + bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" + depends on AEABI && !THUMB2_KERNEL + help + This option preserves the old syscall interface along with the + new (ARM EABI) one. It also provides a compatibility layer to + intercept syscalls that have structure arguments which layout + in memory differs between the legacy ABI and the new ARM EABI + (only for non "thumb" binaries). This option adds a tiny + overhead to all syscalls and produces a slightly larger kernel. + + The seccomp filter system will not be available when this is + selected, since there is no way yet to sensibly distinguish + between calling conventions during filtering. + + If you know you'll be using only pure EABI user space then you + can say N here. If this option is not selected and you attempt + to execute a legacy ABI binary then the result will be + UNPREDICTABLE (in fact it can be predicted that it won't work + at all). If in doubt say N. + +config ARCH_SELECT_MEMORY_MODEL + def_bool y + +config ARCH_FLATMEM_ENABLE + def_bool !(ARCH_RPC || ARCH_SA1100) + +config ARCH_SPARSEMEM_ENABLE + def_bool !ARCH_FOOTBRIDGE + select SPARSEMEM_STATIC if SPARSEMEM + +config HIGHMEM + bool "High Memory Support" + depends on MMU + select KMAP_LOCAL + select KMAP_LOCAL_NON_LINEAR_PTE_ARRAY + help + The address space of ARM processors is only 4 Gigabytes large + and it has to accommodate user address space, kernel address + space as well as some memory mapped IO. That means that, if you + have a large amount of physical memory and/or IO, not all of the + memory can be "permanently mapped" by the kernel. The physical + memory that is not permanently mapped is called "high memory". + + Depending on the selected kernel/user memory split, minimum + vmalloc space and actual amount of RAM, you may not need this + option which should result in a slightly faster kernel. + + If unsure, say n. + +config HIGHPTE + bool "Allocate 2nd-level pagetables from highmem" if EXPERT + depends on HIGHMEM + default y + help + The VM uses one page of physical memory for each page table. + For systems with a lot of processes, this can use a lot of + precious low memory, eventually leading to low memory being + consumed by page tables. Setting this option will allow + user-space 2nd level page tables to reside in high memory. + +config CPU_SW_DOMAIN_PAN + bool "Enable use of CPU domains to implement privileged no-access" + depends on MMU && !ARM_LPAE + default y + help + Increase kernel security by ensuring that normal kernel accesses + are unable to access userspace addresses. This can help prevent + use-after-free bugs becoming an exploitable privilege escalation + by ensuring that magic values (such as LIST_POISON) will always + fault when dereferenced. + + CPUs with low-vector mappings use a best-efforts implementation. + Their lower 1MB needs to remain accessible for the vectors, but + the remainder of userspace will become appropriately inaccessible. + +config HW_PERF_EVENTS + def_bool y + depends on ARM_PMU + +config ARM_MODULE_PLTS + bool "Use PLTs to allow module memory to spill over into vmalloc area" + depends on MODULES + select KASAN_VMALLOC if KASAN + default y + help + Allocate PLTs when loading modules so that jumps and calls whose + targets are too far away for their relative offsets to be encoded + in the instructions themselves can be bounced via veneers in the + module's PLT. This allows modules to be allocated in the generic + vmalloc area after the dedicated module memory area has been + exhausted. The modules will use slightly more memory, but after + rounding up to page size, the actual memory footprint is usually + the same. + + Disabling this is usually safe for small single-platform + configurations. If unsure, say y. + +config ARCH_FORCE_MAX_ORDER + int "Order of maximal physically contiguous allocations" + default "11" if SOC_AM33XX + default "8" if SA1111 + default "10" + help + The kernel page allocator limits the size of maximal physically + contiguous allocations. The limit is called MAX_ORDER and it + defines the maximal power of two of number of pages that can be + allocated as a single contiguous block. This option allows + overriding the default setting when ability to allocate very + large blocks of physically contiguous memory is required. + + Don't change if unsure. + +config ALIGNMENT_TRAP + def_bool CPU_CP15_MMU + select HAVE_PROC_CPU if PROC_FS + help + ARM processors cannot fetch/store information which is not + naturally aligned on the bus, i.e., a 4 byte fetch must start at an + address divisible by 4. On 32-bit ARM processors, these non-aligned + fetch/store instructions will be emulated in software if you say + here, which has a severe performance impact. This is necessary for + correct operation of some network protocols. With an IP-only + configuration it is safe to say N, otherwise say Y. + +config UACCESS_WITH_MEMCPY + bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()" + depends on MMU + default y if CPU_FEROCEON + help + Implement faster copy_to_user and clear_user methods for CPU + cores where a 8-word STM instruction give significantly higher + memory write throughput than a sequence of individual 32bit stores. + + A possible side effect is a slight increase in scheduling latency + between threads sharing the same address space if they invoke + such copy operations with large buffers. + + However, if the CPU data cache is using a write-allocate mode, + this option is unlikely to provide any performance gain. + +config PARAVIRT + bool "Enable paravirtualization code" + help + This changes the kernel so it can modify itself when it is run + under a hypervisor, potentially improving performance significantly + over full virtualization. + +config PARAVIRT_TIME_ACCOUNTING + bool "Paravirtual steal time accounting" + select PARAVIRT + help + Select this option to enable fine granularity task steal time + accounting. Time spent executing other tasks in parallel with + the current vCPU is discounted from the vCPU power. To account for + that, there can be a small performance impact. + + If in doubt, say N here. + +config XEN_DOM0 + def_bool y + depends on XEN + +config XEN + bool "Xen guest support on ARM" + depends on ARM && AEABI && OF + depends on CPU_V7 && !CPU_V6 + depends on !GENERIC_ATOMIC64 + depends on MMU + select ARCH_DMA_ADDR_T_64BIT + select ARM_PSCI + select SWIOTLB + select SWIOTLB_XEN + select PARAVIRT + help + Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. + +config CC_HAVE_STACKPROTECTOR_TLS + def_bool $(cc-option,-mtp=cp15 -mstack-protector-guard=tls -mstack-protector-guard-offset=0) + +config STACKPROTECTOR_PER_TASK + bool "Use a unique stack canary value for each task" + depends on STACKPROTECTOR && CURRENT_POINTER_IN_TPIDRURO && !XIP_DEFLATED_DATA + depends on GCC_PLUGINS || CC_HAVE_STACKPROTECTOR_TLS + select GCC_PLUGIN_ARM_SSP_PER_TASK if !CC_HAVE_STACKPROTECTOR_TLS + default y + help + Due to the fact that GCC uses an ordinary symbol reference from + which to load the value of the stack canary, this value can only + change at reboot time on SMP systems, and all tasks running in the + kernel's address space are forced to use the same canary value for + the entire duration that the system is up. + + Enable this option to switch to a different method that uses a + different canary value for each task. + +endmenu + +menu "Boot options" + +config USE_OF + bool "Flattened Device Tree support" + select IRQ_DOMAIN + select OF + help + Include support for flattened device tree machine descriptions. + +config ARCH_WANT_FLAT_DTB_INSTALL + def_bool y + +config ATAGS + bool "Support for the traditional ATAGS boot data passing" + default y + help + This is the traditional way of passing data to the kernel at boot + time. If you are solely relying on the flattened device tree (or + the ARM_ATAG_DTB_COMPAT option) then you may unselect this option + to remove ATAGS support from your kernel binary. + +config DEPRECATED_PARAM_STRUCT + bool "Provide old way to pass kernel parameters" + depends on ATAGS + help + This was deprecated in 2001 and announced to live on for 5 years. + Some old boot loaders still use this way. + +# Compressed boot loader in ROM. Yes, we really want to ask about +# TEXT and BSS so we preserve their values in the config files. +config ZBOOT_ROM_TEXT + hex "Compressed ROM boot loader base address" + default 0x0 + help + The physical address at which the ROM-able zImage is to be + placed in the target. Platforms which normally make use of + ROM-able zImage formats normally set this to a suitable + value in their defconfig file. + + If ZBOOT_ROM is not enabled, this has no effect. + +config ZBOOT_ROM_BSS + hex "Compressed ROM boot loader BSS address" + default 0x0 + help + The base address of an area of read/write memory in the target + for the ROM-able zImage which must be available while the + decompressor is running. It must be large enough to hold the + entire decompressed kernel plus an additional 128 KiB. + Platforms which normally make use of ROM-able zImage formats + normally set this to a suitable value in their defconfig file. + + If ZBOOT_ROM is not enabled, this has no effect. + +config ZBOOT_ROM + bool "Compressed boot loader in ROM/flash" + depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS + depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR + help + Say Y here if you intend to execute your compressed kernel image + (zImage) directly from ROM or flash. If unsure, say N. + +config ARM_APPENDED_DTB + bool "Use appended device tree blob to zImage (EXPERIMENTAL)" + depends on OF + help + With this option, the boot code will look for a device tree binary + (DTB) appended to zImage + (e.g. cat zImage .dtb > zImage_w_dtb). + + This is meant as a backward compatibility convenience for those + systems with a bootloader that can't be upgraded to accommodate + the documented boot protocol using a device tree. + + Beware that there is very little in terms of protection against + this option being confused by leftover garbage in memory that might + look like a DTB header after a reboot if no actual DTB is appended + to zImage. Do not leave this option active in a production kernel + if you don't intend to always append a DTB. Proper passing of the + location into r2 of a bootloader provided DTB is always preferable + to this option. + +config ARM_ATAG_DTB_COMPAT + bool "Supplement the appended DTB with traditional ATAG information" + depends on ARM_APPENDED_DTB + help + Some old bootloaders can't be updated to a DTB capable one, yet + they provide ATAGs with memory configuration, the ramdisk address, + the kernel cmdline string, etc. Such information is dynamically + provided by the bootloader and can't always be stored in a static + DTB. To allow a device tree enabled kernel to be used with such + bootloaders, this option allows zImage to extract the information + from the ATAG list and store it at run time into the appended DTB. + +choice + prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT + default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER + +config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER + bool "Use bootloader kernel arguments if available" + help + Uses the command-line options passed by the boot loader instead of + the device tree bootargs property. If the boot loader doesn't provide + any, the device tree bootargs property will be used. + +config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND + bool "Extend with bootloader kernel arguments" + help + The command-line arguments provided by the boot loader will be + appended to the the device tree bootargs property. + +endchoice + +config CMDLINE + string "Default kernel command string" + default "" + help + On some architectures (e.g. CATS), there is currently no way + for the boot loader to pass arguments to the kernel. For these + architectures, you should supply some command-line options at build + time by entering them here. As a minimum, you should specify the + memory size and the root device (e.g., mem=64M root=/dev/nfs). + +choice + prompt "Kernel command line type" if CMDLINE != "" + default CMDLINE_FROM_BOOTLOADER + +config CMDLINE_FROM_BOOTLOADER + bool "Use bootloader kernel arguments if available" + help + Uses the command-line options passed by the boot loader. If + the boot loader doesn't provide any, the default kernel command + string provided in CMDLINE will be used. + +config CMDLINE_EXTEND + bool "Extend bootloader kernel arguments" + help + The command-line arguments provided by the boot loader will be + appended to the default kernel command string. + +config CMDLINE_FORCE + bool "Always use the default kernel command string" + help + Always use the default kernel command string, even if the boot + loader passes other arguments to the kernel. + This is useful if you cannot or don't want to change the + command-line options your boot loader passes to the kernel. +endchoice + +config XIP_KERNEL + bool "Kernel Execute-In-Place from ROM" + depends on !ARM_LPAE && !ARCH_MULTIPLATFORM + depends on !ARM_PATCH_IDIV && !ARM_PATCH_PHYS_VIRT && !SMP_ON_UP + help + Execute-In-Place allows the kernel to run from non-volatile storage + directly addressable by the CPU, such as NOR flash. This saves RAM + space since the text section of the kernel is not loaded from flash + to RAM. Read-write sections, such as the data section and stack, + are still copied to RAM. The XIP kernel is not compressed since + it has to run directly from flash, so it will take more space to + store it. The flash address used to link the kernel object files, + and for storing it, is configuration dependent. Therefore, if you + say Y here, you must know the proper physical address where to + store the kernel image depending on your own flash memory usage. + + Also note that the make target becomes "make xipImage" rather than + "make zImage" or "make Image". The final kernel binary to put in + ROM memory will be arch/arm/boot/xipImage. + + If unsure, say N. + +config XIP_PHYS_ADDR + hex "XIP Kernel Physical Location" + depends on XIP_KERNEL + default "0x00080000" + help + This is the physical address in your flash memory the kernel will + be linked for and stored to. This address is dependent on your + own flash usage. + +config XIP_DEFLATED_DATA + bool "Store kernel .data section compressed in ROM" + depends on XIP_KERNEL + select ZLIB_INFLATE + help + Before the kernel is actually executed, its .data section has to be + copied to RAM from ROM. This option allows for storing that data + in compressed form and decompressed to RAM rather than merely being + copied, saving some precious ROM space. A possible drawback is a + slightly longer boot delay. + +config ARCH_SUPPORTS_KEXEC + def_bool (!SMP || PM_SLEEP_SMP) && MMU + +config ATAGS_PROC + bool "Export atags in procfs" + depends on ATAGS && KEXEC + default y + help + Should the atags used to boot the kernel be exported in an "atags" + file in procfs. Useful with kexec. + +config ARCH_SUPPORTS_CRASH_DUMP + def_bool y + +config AUTO_ZRELADDR + bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM + default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100) + help + ZRELADDR is the physical address where the decompressed kernel + image will be placed. If AUTO_ZRELADDR is selected, the address + will be determined at run-time, either by masking the current IP + with 0xf8000000, or, if invalid, from the DTB passed in r2. + This assumes the zImage being placed in the first 128MB from + start of memory. + +config EFI_STUB + bool + +config EFI + bool "UEFI runtime support" + depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL + select UCS2_STRING + select EFI_PARAMS_FROM_FDT + select EFI_STUB + select EFI_GENERIC_STUB + select EFI_RUNTIME_WRAPPERS + help + This option provides support for runtime services provided + by UEFI firmware (such as non-volatile variables, realtime + clock, and platform reset). A UEFI stub is also provided to + allow the kernel to be booted as an EFI application. This + is only useful for kernels that may run on systems that have + UEFI firmware. + +config DMI + bool "Enable support for SMBIOS (DMI) tables" + depends on EFI + default y + help + This enables SMBIOS/DMI feature for systems. + + This option is only useful on systems that have UEFI firmware. + However, even with this option, the resultant kernel should + continue to boot on existing non-UEFI platforms. + + NOTE: This does *NOT* enable or encourage the use of DMI quirks, + i.e., the the practice of identifying the platform via DMI to + decide whether certain workarounds for buggy hardware and/or + firmware need to be enabled. This would require the DMI subsystem + to be enabled much earlier than we do on ARM, which is non-trivial. + +endmenu + +menu "CPU Power Management" + +source "drivers/cpufreq/Kconfig" + +source "drivers/cpuidle/Kconfig" + +endmenu + +menu "Floating point emulation" + +comment "At least one emulation must be selected" + +config FPE_NWFPE + bool "NWFPE math emulation" + depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL + help + Say Y to include the NWFPE floating point emulator in the kernel. + This is necessary to run most binaries. Linux does not currently + support floating point hardware so you need to say Y here even if + your machine has an FPA or floating point co-processor podule. + + You may say N here if you are going to load the Acorn FPEmulator + early in the bootup. + +config FPE_NWFPE_XP + bool "Support extended precision" + depends on FPE_NWFPE + help + Say Y to include 80-bit support in the kernel floating-point + emulator. Otherwise, only 32 and 64-bit support is compiled in. + Note that gcc does not generate 80-bit operations by default, + so in most cases this option only enlarges the size of the + floating point emulator without any good reason. + + You almost surely want to say N here. + +config FPE_FASTFPE + bool "FastFPE math emulation (EXPERIMENTAL)" + depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 + help + Say Y here to include the FAST floating point emulator in the kernel. + This is an experimental much faster emulator which now also has full + precision for the mantissa. It does not support any exceptions. + It is very simple, and approximately 3-6 times faster than NWFPE. + + It should be sufficient for most programs. It may be not suitable + for scientific calculations, but you have to check this for yourself. + If you do not feel you need a faster FP emulation you should better + choose NWFPE. + +config VFP + bool "VFP-format floating point maths" + depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON + help + Say Y to include VFP support code in the kernel. This is needed + if your hardware includes a VFP unit. + + Please see for + release notes and additional status information. + + Say N if your target does not have VFP hardware. + +config VFPv3 + bool + depends on VFP + default y if CPU_V7 + +config NEON + bool "Advanced SIMD (NEON) Extension support" + depends on VFPv3 && CPU_V7 + help + Say Y to include support code for NEON, the ARMv7 Advanced SIMD + Extension. + +config KERNEL_MODE_NEON + bool "Support for NEON in kernel mode" + depends on NEON && AEABI + help + Say Y to include support for NEON in kernel mode. + +endmenu + +menu "Power management options" + +source "kernel/power/Kconfig" + +config ARCH_SUSPEND_POSSIBLE + depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \ + CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK + def_bool y + +config ARM_CPU_SUSPEND + def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW + depends on ARCH_SUSPEND_POSSIBLE + +config ARCH_HIBERNATION_POSSIBLE + bool + depends on MMU + default y if ARCH_SUSPEND_POSSIBLE + +endmenu + +source "arch/arm/Kconfig.assembler" -- cgit v1.2.3