From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- .../boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts | 122 +++++++++++++++++++++ 1 file changed, 122 insertions(+) create mode 100644 arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts (limited to 'arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts') diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts new file mode 100644 index 0000000000..fd344b5508 --- /dev/null +++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Author: Arınç ÜNAL + */ + +/dts-v1/; + +#include "bcm47094-asus-rt-ac3100.dtsi" + +/ { + compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708"; + model = "ASUS RT-AC88U"; + + nvram@1c080000 { + et1macaddr: et1macaddr { + }; + }; + + switch { + compatible = "realtek,rtl8365mb"; + /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */ + mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + realtek,disable-leds; + dsa,member = <1 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan5"; + phy-handle = <ðphy0>; + }; + + port@1 { + reg = <1>; + label = "lan6"; + phy-handle = <ðphy1>; + }; + + port@2 { + reg = <2>; + label = "lan7"; + phy-handle = <ðphy2>; + }; + + port@3 { + reg = <3>; + label = "lan8"; + phy-handle = <ðphy3>; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&sw0_p5>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <2100>; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + + mdio { + compatible = "realtek,smi-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; + + ethphy3: ethernet-phy@3 { + reg = <3>; + }; + }; + }; +}; + +&srab { + dsa,member = <0 0>; + + ports { + sw0_p5: port@5 { + /delete-property/ethernet; + + label = "extsw"; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; +}; + +&gmac0 { + status = "disabled"; +}; + +&gmac1 { + nvmem-cells = <&et1macaddr>; + nvmem-cell-names = "mac-address"; +}; -- cgit v1.2.3