From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- arch/arm/boot/dts/ti/omap/omap3-igep0030.dts | 59 ++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 arch/arm/boot/dts/ti/omap/omap3-igep0030.dts (limited to 'arch/arm/boot/dts/ti/omap/omap3-igep0030.dts') diff --git a/arch/arm/boot/dts/ti/omap/omap3-igep0030.dts b/arch/arm/boot/dts/ti/omap/omap3-igep0030.dts new file mode 100644 index 0000000000..e3f99dbef2 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/omap3-igep0030.dts @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x) + * + * Copyright (C) 2012 Javier Martinez Canillas + * Copyright (C) 2012 Enric Balletbo i Serra + */ + +#include "omap3-igep0030-common.dtsi" + +/ { + model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)"; + compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap3"; + + vmmcsdio_fixed: fixedregulator-mmcsdio { + compatible = "regulator-fixed"; + regulator-name = "vmmcsdio_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + mmc2_pwrseq: mmc2_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>, /* gpio_139 - RESET_N_W */ + <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 - WIFI_PDN */ + }; +}; + +&omap3_pmx_core { + lbee1usjyc_pins: lbee1usjyc-pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */ + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 - WIFI_PDN */ + OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */ + >; + }; +}; + +&leds { + pinctrl-names = "default"; + pinctrl-0 = <&leds_core2_pins>; + + boot { + label = "omap3:green:boot"; + gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>; /* LEDSYNC */ + default-state = "on"; + }; +}; + +/* On board Wifi module */ +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>; + vmmc-supply = <&vmmcsdio_fixed>; + mmc-pwrseq = <&mmc2_pwrseq>; + bus-width = <4>; + non-removable; +}; + -- cgit v1.2.3