From ace9429bb58fd418f0c81d4c2835699bddf6bde6 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:27:49 +0200 Subject: Adding upstream version 6.6.15. Signed-off-by: Daniel Baumann --- arch/arm/mach-omap2/sram.c | 326 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 326 insertions(+) create mode 100644 arch/arm/mach-omap2/sram.c (limited to 'arch/arm/mach-omap2/sram.c') diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c new file mode 100644 index 0000000000..898b011ae8 --- /dev/null +++ b/arch/arm/mach-omap2/sram.c @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren + * + * Copyright (C) 2009-2012 Texas Instruments + * Added OMAP4/5 support - Santosh Shilimkar + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include "soc.h" +#include "iomap.h" +#include "prm2xxx_3xxx.h" +#include "sdrc.h" +#include "sram.h" + +#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) +#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) + +#define SRAM_BOOTLOADER_SZ 0x00 + +#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) +#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) +#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) + +#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) +#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) +#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) +#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) +#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) + +#define GP_DEVICE 0x300 + +#define ROUND_DOWN(value, boundary) ((value) & (~((boundary) - 1))) + +static unsigned long omap_sram_start; +static unsigned long omap_sram_size; +static void __iomem *omap_sram_base; +static unsigned long omap_sram_skip; +static void __iomem *omap_sram_ceil; + +/* + * Memory allocator for SRAM: calculates the new ceiling address + * for pushing a function using the fncpy API. + * + * Note that fncpy requires the returned address to be aligned + * to an 8-byte boundary. + */ +static void *omap_sram_push_address(unsigned long size) +{ + unsigned long available, new_ceil = (unsigned long)omap_sram_ceil; + + available = omap_sram_ceil - (omap_sram_base + omap_sram_skip); + + if (size > available) { + pr_err("Not enough space in SRAM\n"); + return NULL; + } + + new_ceil -= size; + new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN); + omap_sram_ceil = IOMEM(new_ceil); + + return (void __force *)omap_sram_ceil; +} + +void *omap_sram_push(void *funcp, unsigned long size) +{ + void *sram; + unsigned long base; + int pages; + void *dst = NULL; + + sram = omap_sram_push_address(size); + if (!sram) + return NULL; + + base = (unsigned long)sram & PAGE_MASK; + pages = PAGE_ALIGN(size) / PAGE_SIZE; + + set_memory_rw(base, pages); + + dst = fncpy(sram, funcp, size); + + set_memory_rox(base, pages); + + return dst; +} + +/* + * The SRAM context is lost during off-idle and stack + * needs to be reset. + */ +static void omap_sram_reset(void) +{ + omap_sram_ceil = omap_sram_base + omap_sram_size; +} + +/* + * Depending on the target RAMFS firewall setup, the public usable amount of + * SRAM varies. The default accessible size for all device types is 2k. A GP + * device allows ARM11 but not other initiators for full size. This + * functionality seems ok until some nice security API happens. + */ +static int is_sram_locked(void) +{ + if (omap_type() == OMAP2_DEVICE_TYPE_GP) { + /* RAMFW: R/W access to all initiators for all qualifier sets */ + if (cpu_is_omap242x()) { + writel_relaxed(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ + writel_relaxed(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ + writel_relaxed(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ + } + if (cpu_is_omap34xx()) { + writel_relaxed(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ + writel_relaxed(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ + writel_relaxed(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ + writel_relaxed(0x0, OMAP34XX_VA_ADDR_MATCH2); + writel_relaxed(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); + } + return 0; + } else + return 1; /* assume locked with no PPA or security driver */ +} + +/* + * The amount of SRAM depends on the core type. + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +static void __init omap_detect_sram(void) +{ + omap_sram_skip = SRAM_BOOTLOADER_SZ; + if (is_sram_locked()) { + if (cpu_is_omap34xx()) { + omap_sram_start = OMAP3_SRAM_PUB_PA; + if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || + (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { + omap_sram_size = 0x7000; /* 28K */ + omap_sram_skip += SZ_16K; + } else { + omap_sram_size = 0x8000; /* 32K */ + } + } else { + omap_sram_start = OMAP2_SRAM_PUB_PA; + omap_sram_size = 0x800; /* 2K */ + } + } else { + if (cpu_is_omap34xx()) { + omap_sram_start = OMAP3_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else { + omap_sram_start = OMAP2_SRAM_PA; + if (cpu_is_omap242x()) + omap_sram_size = 0xa0000; /* 640K */ + else if (cpu_is_omap243x()) + omap_sram_size = 0x10000; /* 64K */ + } + } +} + +/* + * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. + */ +static void __init omap2_map_sram(void) +{ + unsigned long base; + int pages; + int cached = 1; + + if (cpu_is_omap34xx()) { + /* + * SRAM must be marked as non-cached on OMAP3 since the + * CORE DPLL M2 divider change code (in SRAM) runs with the + * SDRAM controller disabled, and if it is marked cached, + * the ARM may attempt to write cache lines back to SDRAM + * which will cause the system to hang. + */ + cached = 0; + } + + if (omap_sram_size == 0) + return; + + omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE); + omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, cached); + if (!omap_sram_base) { + pr_err("SRAM: Could not map\n"); + return; + } + + omap_sram_reset(); + + /* + * Looks like we need to preserve some bootloader code at the + * beginning of SRAM for jumping to flash for reboot to work... + */ + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); + + base = (unsigned long)omap_sram_base; + pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE; + + set_memory_rox(base, pages); +} + +static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); + +void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock) +{ + BUG_ON(!_omap2_sram_ddr_init); + _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, + base_cs, force_unlock); +} + +static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, + u32 mem_type); + +void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) +{ + BUG_ON(!_omap2_sram_reprogram_sdrc); + _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); +} + +static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) +{ + BUG_ON(!_omap2_set_prcm); + return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); +} + +#ifdef CONFIG_SOC_OMAP2420 +static int __init omap242x_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, + omap242x_sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc, + omap242x_sram_reprogram_sdrc_sz); + + _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm, + omap242x_sram_set_prcm_sz); + + return 0; +} +#else +static inline int omap242x_sram_init(void) +{ + return 0; +} +#endif + +#ifdef CONFIG_SOC_OMAP2430 +static int __init omap243x_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, + omap243x_sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc, + omap243x_sram_reprogram_sdrc_sz); + + _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm, + omap243x_sram_set_prcm_sz); + + return 0; +} +#else +static inline int omap243x_sram_init(void) +{ + return 0; +} +#endif + +#ifdef CONFIG_ARCH_OMAP3 + +void omap3_sram_restore_context(void) +{ + omap_sram_reset(); + + omap_push_sram_idle(); +} + +static inline int omap34xx_sram_init(void) +{ + omap3_sram_restore_context(); + return 0; +} +#else +static inline int omap34xx_sram_init(void) +{ + return 0; +} +#endif /* CONFIG_ARCH_OMAP3 */ + +int __init omap_sram_init(void) +{ + omap_detect_sram(); + omap2_map_sram(); + + if (cpu_is_omap242x()) + omap242x_sram_init(); + else if (cpu_is_omap2430()) + omap243x_sram_init(); + else if (cpu_is_omap34xx()) + omap34xx_sram_init(); + + return 0; +} -- cgit v1.2.3